Painting Tenders
Painting Tenders
Provincial Government Of Camarines Norte Tender
Civil And Construction...+1Construction Material
Philippines
Closing Date3 Dec 2024
Tender AmountPHP 999.3 K (USD 16.9 K)
Details: Description Request For Quotation Infrastructure (negotiated Procurement-small Value Procurement) The Provincial Government Of Camarines Norte (pgcn), Through Its Bids And Awards Committee (bac), Hereby Invites All Interested Contractors, To Quote Their Lowest Price On The Project Stated Below, Subject To The Terms Of Reference (tor), In Accordance With Section 53.9 And Annex H Of The 2016 Revised Implementing Rules And Regulation Of Ra 1984. Name Of Project And Location: Repair/rehabilitation Of School Building Sotero Mago Elementary School, Capalonga, Camarines Norte Contract Reference Number: Rfq-infra-2024-018 Approved Budget For The Contract: P 999,380.30 Terms Of Reference I. The Following Documentary Requirements Shall Be Submitted Together With The Price Quotation (sealed In An Envelope): 1. Valid Philgeps Registration Certificate-platinum (attach Annex “a” Stating That You Have A Current And Updated File Of The Following Class “a” Eligibility Documents Under Section 23.1 (a) And 24.1): A. Sec/dti/cda Registration Certificate B. Mayor’s Business Permit C. Tax Clearance D. Philippine Contractors Accreditation Board (pcab) License And Registration E. Audited Financial Statements 2. Bir Registration Certificate 3. Income Tax Return (itr)- (for Abc’s Above 500k) 4. Omnibus Sworn Statement-(for Abc’s Above 50k) 5. Affidavit Of Site Inspection 6. Name/credentials Of Proposed Key Personnel (project Manager, Project Engineer, Materials Engineer, Construction Foreman And Safety Officer) 7. List Of Completed Similar Project Within The Last Three (3) Years With Attached Supporting Documents 8. List Of Contractor’s Equipment (one (1) Unit Welding Machine, One (1) Unit Hoisting Machine, 4x4 Pick-up Type Service Vehicle) (the Contractor’s Major Equipment Units Which Are Owned, Leased And/or Under Purchase Agreements Must Be Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor During The Duration Of The Project, As The Case May Be Which Must Meet The Minimum Requirements) 9. Quotations Not Accompanied By The Documents Stated Shall Be Automatically Disqualified Ii. Additional Requirements To Be Submitted Within Five (5) Days From Opening Of Sealed Quotations: 1. Construction Schedule And S-curve 2. Pert/cpm 3. Manpower Schedule 4. Equipment Utilization Schedule 5. Construction Method In Narrative Form 6. Construction Safety & Health Programs Approved By Dole* *copy Of The Cshp Received By Dole May Be Initially Submitted Together With The Noa However, The Dole Approved Cshp Must Be Immediately Submitted Upon Approval. Ii. Implementation Schedule: The Project Should Be Completed Within Sixty (60) Calendar Days Starting From Receipt Of Notice To Proceed (ntp). Iii. General Conditions: 1. All Quotations Must Be Legibly Written. 2. Price Offers Exceeding The Approved Budget For The Contract (abc) Shall Be Automatically Disqualified. 3. Price Quotations Shall Be Duly Supported By The Bidder’s Detailed Computation Of Estimated Costs For Each Item. 4. Total Bid Offers Shall Be Inclusive Of Taxes Such As But Not Limited To Vat, Income Tax, Local Tax (such As Sand & Gravel Tax, Contractor’s Tax) And Other Levies. 5. Price Quotation Will Be Valid For Sixty (60) Calendar Days From Date Of Opening Of Sealed Quotations. 6. The Price Offered Shall Not Be Subject To Any Increase For Whatever Reason Including In Cases Of Devaluation/inflation During The Entire Duration Of The Contract. Iv. Awards Of Contract All Submitted Quotations Will Be Evaluated And Calculated Including Its Eligibility Requirements. The Bac Shall Recommend To The Head Of The Procuring Entity The Award Of Contract To The Contractor/supplier With The Single Or Lowest Calculated Responsive Quotation, Setting Forth The Names Of Those Who Responded To The Request For Quotations (rfq) With An Abstract Of Quotations. V. Performance Of Security 1. To Guarantee The Faithful Performance Of The Successful Bidder Of Its Obligation Under The Contract, It Shall Post A Performance Security Within Ten (10) Calendar Days From The Receipt Of Notice Of Award (noa), Which Shall Answer For Any Liability Arising From The Performance Of The Contract. 2. The Performance Security Shall Be Denominated In Philippine Pesos And Posted In Favor Of The Procuring Entity In An Amount Not Less Than The Percentage Of The Total Contract Price In Accordance With The Following Schedule: Form Of Performance Security Amount Of Performance Security (not Less Than The Percentage Of The Total Contract Price) (a) Cash Or Cashier’s/manager’s Check Issued By A Universal Or Commercial Bank. (the Cashier’s/manager’s Check May Be Issued By Other Banks Certified By The Bsp As Authorized To Issue Such Financial Instrument.) Ten Percent (10%) (b) Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank: Provided, However, That It Shall Be Confirmed Or Authenticated By A Universal Or Commercial Bank, If Issued By A Foreign Bank. (the Bank Draft/guarantee, Or Irrevocable Letter Of Credit May Be Issued By Other Banks Certified By The Bsp As Authorized To Issue Such Financial Instrument.) (c) Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security. Thirty Percent (30%) 3. The Performance Security Posted In Favor Of The Procuring Entity Shall Be Forfeited In The Event It Is Established That The Contractor Is In Default In Any Of Its Obligations Under The Contract. Vi. Contract Signing 1. The Provincial Government Camarines Norte Shall Enter Into Contract With The Winning Bidder Upon Posting Of The Required Performance Security And Insurance Coverage. The Following Documents Shall Form Part Of The Contract: A. Contract Agreement; B. Terms Of Reference; C. Price Quotation Form Including The Detailed Cost Computation Of Estimated Costs; And D. Notice Of Award Vii. Notice To Proceed (ntp) The Provincial Government Of Camarines Norte Shall Issue The Ntp To The Successful Bidder Upon Approval Of The Contract By The Head Of The Procuring Entity. Viii. Contract Implementation: The Rules And Regulations And Other Aspect Of Contract Implementation Shall Be In Accordance With Annex E Of The 2016 Revised Irr Of Ra 984, Such As, But Not Limited To The Following: A. Variation Order-change Order/extra Work Order B. Additional/extra Work Costing C. Conditions Under Which The Contractor Is Start To Work Under Variation Orders And Receive Payments D. Advance Payment E. Progress Payments F. Retention Money G. Contract Completion H. Negative Slippage I. Liquidated Damages J. Suspension Of Work K. Extension Of Contact Time L. Accreditation Of Testing Laboratories M. Other Rules And Guidelines Ix. Warrant Security: 1. To Guarantee That The Contractor Shall Perform His Responsibilities As Prescribed In Section 62.2.3.1(a) Of This Irr, It Shall Be Required To Post A Warranty Security In Accordance With The Following Schedule: Form Of Performance Security Amount Of Performance Security (not Less Than The Percentage Of The Total Contract Price) (a) Cash Or Letter Of Credit Issued By A Universal Or Commercial Bank: Provided, However, That The Letter Of Credit Shall Be Confirmed Or Authenticated By A Universal Or Commercial Bank, If Issued By A Foreign Bank. (the Letter Of Credit May Be Issued By Other Banks Certified By The Bsp As Authorized To Issue Such Financial Instrument.) Five Percent (5%) (b) Bank Guarantee Confirmed By A Universal Or Commercial Bank. (the Bank Draft/guarantee May Be Issued By Other Banks Certified By The Bsp As Authorized To Issue Such Financial Instrument.) Ten Percent (10%) (c) Surely Bond Callable Upon Demand Issued By Gsis Or A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security. Thirty Percent (30%) 2. The Warranty Security Shall Be Denominated In Philippine Pesos, Remain Effective For One (1) Year From The Date Of Issuance Of The Certificate Of Final Acceptance By The Pgcn. Funded Through The 20% Development Fund With Sp Res. No.519-2024/ao No.16-2024-supplemental Budget No. 2. Interested Contractors/suppliers May Obtain Further Information From The Provincial Government Of Camarines Norte And Inspect The Terms Of Reference At The Address Given Below From 8:00 A.m. To 5:00 P.m., Monday To Friday, Except Holidays. A Complete Set Of Request For Quotation Documents May Be Acquired By Interested Contractors/suppliers On November 22, 2024 At The Provincial Capitol Building, Daet, Camarines Norte And From The Website Of The Philippine Government Electronic Procurement System (philgeps) Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (p1000.00). The Procuring Entry Shall Allow The Contractor/suppliers To Present Its Proof Of Payment For The Fees In Person. All Quotations Together With The Required Documents Must Be Placed In A Sealed Envelope Marked Repair/rehabilitation Of School Building, Sotero Mago Elementary School, Capalonga, Camarines Norte Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 3, 2024 At 1:30p.m. Late Bids Shall Not Be Accepted. Opening Of Sealed Quotations Shall Be On December 3, 2024 At 2:00p.m. Onwards At The New Bac Conference Office, At The Back Of Agro-sports Center, J. Lukban St., Daet, Camarines Norte. Bids Will Be Opened In The Presence Of The Contractors/suppliers Representatives Who Choose To Attend The Activity. For Further Inquiries, Please Coordinate With The Bac Secretariat The Address Below: Engr. Almirante A. Abad Head, Bac Secretariat Bac Office, Camarines Norte Agro Sports Center J. Lukban St., Daet, Camarines Norte The Provincial Government Of Camarines Norte Reserves The Right To Reject Any Or All Price Quotations, To Waive Any Minor Defects Therein, To Annul The Bidding Process, To Reject All Price Quotations, At Any Time Prior To Contract Award, Thereby Incurring Any Liability To The Affected Bidder(s), And To Accept Only The Offer That Is Most Advantageous To The Government. The Pgcn Assumes No Responsibility Whatsoever To Compensate And Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Price Quotations. Atty. Archimedes O. Yanto Provincial Legal Officer/bac Chairperson Price Quotation To: Atty. Archimedes O. Yanto Provincial Legal Officer/bac Chairperson Sir: After Having Fully Read And Accepted The Terms Of Reference For The Repair/rehabilitation Of School Building, Sotero Mago Elementary School, Capalonga, Camarines Norte, I Hereby Submit, In A Sealed Envelope, My Price Quotation, Along With The Required Documents And Detailed Computation Of Estimated Costs. Item No. Item Description/ Specifications/scope Of Work Quantity Unit Unit Cost Total Cost Name Of Project: Repair/rehabilitation Of School Building Location: Sotero Mago Elementary School, Capalonga, Camarines Norte Approve Budget For The Contract (abc): P 999,380.30 I Removal Of Existing Roof/trusses/ceiling 1.00 Ls Ii Roof Framing 1.00 Ls Iii Roof Tinning 112.01 Sq.m. Iv Ceiling Works 93.14 Sq.m. V Painting Works (interior Walls) 98.43 Sq.m. Vi Electrical Works 1.00 Ls Spl-1 Provision Of Field Office For The Engineer (rental Basis) 2.00 Mos. Spl-2 Provision Of 4x4 Pick-up Type Service Vehicle For The Engineer On Bare Rental Basis 10.00 Days Spl-3 Project Billboard/signboard 1.00 Each Spl-4 Occupational Safety & Health Program 1.00 Ls T O T A L In Words: If Our Bid Is Accepted, We Undertake To Provide The Required Performance Security. We Agree To Abide By This Bid For The Bid Validity Period Of One Hundred Twenty (120) Days And It Shall Remain Binding Upon Us And May Be Accepted At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award (noa) Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Bid You May Receive. _____________________________________ Name Of Firm/offeror _____________________________________ Printed Name And Signature Of Representative _____________________________________ Address _____________________________________ Telephone No./cellphone No./e-mail Address _____________________________________ Date
Department Of Public Works And Highways Tender
Civil And Construction...+1Building Construction
Philippines
Closing Soon26 Nov 2024
Tender AmountPHP 64.5 Million (USD 1 Million)
Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00127 : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao 1. The Dpwh Regional Office Ii, Through The 2024 Ps-dbm Revolving Fund Intends To Apply The Sum Of ₱64,525,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00127: Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Two - Storey Building For Procurement Service: Department Of Budget And Management (ps-dbm) Regional Depot - Tuguegarao Contract Id No. : 24b00127 Location : Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Brief Project Description : Ps-dbm Building, Generator Set With Generator Set House And Concrete Pavement, Building = 23.0 X 33.8 Meters Scope Of Works : Facilities For The Engineer • Provision (rental Basis), Operation And Maintenance Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer • Provision Of Furniture /fixtures Equipment & Appliances For The Field Office Of The Engineer Other General Requirements • Permits And Clearances • Project Billboard/signboard (dpwh, Coa, Denr) • Occupational Safety And Health Program • Traffic Management • Mobilization/demobilization • Additional Geotechnical Investigation Earthworks • Trees (furnishing And Transplanting) • Clearing And Grubbing • Removal Of Trees • Structure Excavation • Embankment (from Structure Excavation And Borrow) • Gravel Fill Subbase And Base Preparation • Aggregate Subbase Course Surface Courses • Pccp, 0.15m Thick, 14-day Concrete Plain And Reinforced Concrete Works • Structural Concrete, (3000 & 4000) Psi, Class A, 28 Days • Lean Concrete • Reinforcing Steel Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Ceiling, Metal Frame, Gypsum Board • Aluminum Metal Cladding • Modular Partition • Louver Window • Flush Door • Aluminum Framed Glass Doors (swing Type) • Aluminum Glass Windows, (casement, Awning, Fixed) Type • Frames (jambs, Sills, Head, Transoms And Mullions) • Doors, (flush, Wood Panel) • Roll-up Doors • Waterproofing, Liquid • Built-up And Preformed Membrane • Canopy Drain With Strainer • Unglazed Tiles • Cement (floor, Plaster) Finish • Stucco Finish • Painting Works, (masonry/concrete, Steel) • Pvc Doors And Frames • Chb Non-load Bearing (including Reinforcing Steel), (100 & 150) Mm • Louver Block • Metal Structure Accessories • Metal Railing (steel) • Sanitary/plumbing Fixtures • Cold Water Lines • Sewer Line Works • Storm Drainage And Downspout Electrical Works • Rigid Steel Conduit • Rigid Polyvinyl Chloride Pipes (pvc/upvc) • Boxes/wire Gutter • Fittings And Accessories • Electric Wire • Single Pole Wall Switch On One Switch Plate • Duplex (2 Single Pole Wall Switches On One Switch Plate) • Triplex (3 Single Pole Wall Switches On One Switch Plate) • Three-way Switch • Single Convenience Outlet/receptacle, Grounding Type (gt) • Duplex Convenience Outlets/receptacles (gt) • Pop-up Type/floor Duplex Convenience Outlet/receptacle (gt) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pad Mounted Distribution Transformer (oisc) With Complete Accessories • Generator (single Or Three Phase - Standby) • Lighting Fixtures Electronic Works • Network Cabling • Cctv System • Network Video Recorder • Lcd, Led Monitor • Door Access And Card Reader System • Public Address System • System Management Amplifier • Remote Microphone • Ceiling Speaker • Wall Mount Speaker • Wires/cables • Fire Alarm System • Smoke Detector With Base • Heat Detector With Base • Fire Alarm Control Panel • Manual Pull Station Switch • Back-up Battery Pack Mechanical Works • Ventilating Equipment • Exhaust Fan (ceiling Cassette, Wall Mounted, Wall Mounted, Industrial Type) • Booster Pump With Control • Water Tank (stainless) • Fire Department Connections For Wet And Dry Type System • Air Conditioning System (vrf/vrv) • Service Elevator Approved Budget For The Contract (abc) : ₱64,525,000.00 Contract Duration : 243 Calendar Days Inclusive Of 16 Unworkable/rainy Days, 47 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Medium A. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 6 - 26, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Fifty Thousand Pesos Only (₱50,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On November 13, 2024, 1:00 Pm At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before November 26, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On November 26, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: November 6 -12, 2024 Conspicuous Place (procurement Bulletin Board): November 6 -12, 2024
Department Of Agriculture Tender
Machinery and Tools
Philippines
Closing Date3 Dec 2024
Tender AmountPHP 9.1 Million (USD 154.5 K)
Details: Description Section I. Invitation To Bid Da8-goods-2025-02 (pr No. Bt-25-goods-consol-39879-0004) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Multiple Fund Intends To Apply The Sum Of Nine Million One Hundred Thirty Thousand Pesos (p9,130,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “supply And Delivery Of Agricultural Equipment” Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Agriculture-regional Field Office No. 8, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Per Lot (terms And Conditions). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. Qty Uom Item Description Unit Cost Total Cost Lot 1: 2 Number Recirculating Dryer 2,950,000.00 5,900,000.00 Technical Specifications: 1. Type: Recirculating Batch Type 2. Total Maximum Height: 7.2 M 3. Product Quality A. Cracked Grain, % Increase: 3%, Max B. Head Rice, % Decrease: 5% Maximum C. Hulled/damaged Grain % Increase:2% Maximum 4. Drying System A. Holding Capacity: 6 Tons Wet Palay @ 24% Moisture Content, Minimum B. Moisture Gradient: 2%, Maximum C. Drying Efficiency: 75%, Minimum D. Drying Rate: 1% /hr, Maximum E. Drying Loss/spillage: 1%, Maximum F. With Compatible Electric Motor For Drying System G. Vertical Rectangular Bin- Consist Of Rectangular Vertically Installed Drying Chamber H. With Control Panel I. With Mimic Flow Of Operation J. With Basic Electrical Meter Such As Ammeter And Voltmeter Display 5. With Basic Safety Cut-off Features: A. Emergency Shutdown Button B. With On-off Pilot Lights Switch Button And Indicating Operating Motor, Each Component With Motor Should Have Individual Circuit Breaker C. With Magnetic Starter With Overload D. With Interlocking System And Emergency Button 6. Construction: Stainless Steel-astm 304 For Following Parts Such As: A. Drying Bin Wall/cover B. Discharge Chute C. Elevator Casing D. Bottom Boot Section Of The Elevator E. Drying Chamber: Perforated Screen For Non-lsu Type Or Inverted V-duct For Lsu Type F. Auger G. Auger Casing H. Receiving Hopper 7. Mounting Frame A. Steel Angular Bar (50mmx50mmx6mm, Minimum) B. Mounting Frame Shall Be Fitted With Brackets For Contrete Floor Installation 8. With The Following Components: A. Heating System 1 I. Petroleum Based Fuel: Direct Fired Ii. Heating System Efficiency: 90%, Minimum Iii. With Following Accessories: Flame Sensor Electronic Ignition System Automatic Fuel Shut-off Adjustable Fuel Vaporizer Automatic Temperature Control Temperature Monitoring System Galvanized Fuel Container Made Of Non-corrosive And Heat-resistant Material At 200 Liters Capacity, Minimum Compatible Electric Motor For The Heating System B. Heating System 2 I. Biomass Fuel: Indirect-fired Ii. Heating System Efficiency: 50%, Minimum Iii. Can Provide The Required Heating Temperature Or Can Provide 70°c Drying Temperature Iv. Heat Exchanger: Made Of Fire Tubes V. Burning Chamber: Made Of Refractory Bricks With Automatic Fuel Feeder: Auger/air Blown/plunger Type (provided That The Feeder Is Not Directly Exposed To The Burning Fuel) Vi. With The Following Accessories: With Temperature Control With Compatible Electric Motor Vii. Burning Efficiency Of Biomass Furnace: 95%, Minimum With Compatible Electric Motor C. With Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2 I. Made Of Stainless Steel Or Primer Painted And Powder Coated B.i Or G.i Sheet D. Dust Collection System Consist Of Cyclone Separator/collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 9. With Following Accessories: A. Generator Set I. Capacity: Compatible To The Drying System, Able To Provide Sufficient Continuous And Peak Power Requirements Of The Drying System Ii. Voltage Requirement Compatible To The System Iii. Power Supply/generating System Should Be Brand New Iv. Provided With Mechanical Transfer Switch (mts) V. The Electrical Wire, Wire Accessories, And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel/system Shall Be Provided By The Bidder Vi. With The Thermal Insulation And Noise Suppressor B. Portable Handheld Moisture Meter I. Grain: Paddy, Rice, And Other Grains (optional) Ii. Type: Capacitance Iii. Moisture Range:12-25% Or Wider Iv. Accuracy: ≠0.5% Or Better V. Lcd/led Display Vi. Battery Operated Vii. Automatic Density And Temperature Compensation Viii. Product Brochure With Technical Specifications In English C. Standard Heavy Duty Tools: Made Of Tempered Steel And Chrome Vanadium I. One (1) Set Socket Wrench (no. 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,30,32, Minimum) Ii. One (1) Set Combination Wrench (open And Box, 10 Pcs-size Appropriate To The Drying System) Iii. Electrical Plier, 200mm, Minimum Iv. Screwdriver: Philips And Flat Head, 300mm,minimum V. Grease Gun, 250mm Cylinder Length, Minimum Vi. Mechanical Pliers, 200mm, Minimum Vii. Heavy Duty Toolbox And Roll Up Tools Holder Size That Could Accommodate The List Of Tools D. Vacuum Cleaner With Air Blower I. Rated Input Power:1,000 W, Minimum Ii. Vacuum Cord: 5m, Minimum E. Basic Safety Kits F. Personal Protective Equipment Dust Mask Safety Goggle Ear Muff/ear Plug G. One (1) Unit Fire Extinguisher H. Dry Chemical, Stored Pressure Type, 6.80 Kg, Minimum I. Automatic Portable Bag/sack Closer/sewer 10. With Compatible Biomass Furnace 11. With Compatible Transformer 12. Provide Reflectorized And Waterproof Da-rice Logo (12" X 12") Lot 2: 2 Number Walk Behind Transplanter 400,000.00 800,000.00 Technical Specifications: 1. 4 Stroke Gasoline Engine At 4 Hp, Minimum 2. Number Of Planting Rows: 4 Rows, Minimum 3. Row Spacing: 30 Cm 4. Hill Spacing: 12-21cm, Adjustable 5. Field Efficiency: 80%, Minimum 6. Percent Damaged Hills And Percent Missing Hills: 10%, Maximum 7. Noise Emitted: 92db, Maximum 8. With Low Bed Trailer 9. With Manually Operated Seed Sowing Machine With Valid Amtec Test Report 10. With Compatible Seedling Tray: 500 Pcs, Minimum A. Dimension: 60cm X 30cm X 3.5cm (length X Width X Thickness) B. Hole Aperture: 1-1.5mm 11. Holder And Accessories Required For Maintenance With Full Dealer Optional Parts 12. With Original Equipment Manufacturers Manual Written In English. 13. With The Following Standard Heavy Duty Tools And Accessories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. .provide With Extra 2 Liters Engine Oil 14. Provide Reflectorized And Water Resistant Da-rice And Da-noap Logo (4" X 4") 15. Conform To Paes/pabes 151:2015 16. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 3: 1 Number Float-assist Type Walking Type Tractor (floating Tiller) 130,000.00 130,000.00 Technical Specifications: 1. Type: Mudboat 2. Rated Power: Minimum Of 10 Hp Diesel Engine, Aircooled 3. Fuel Consumption: Maximum Of 2.5li/hr 4. Continuous Power: 85% Of Rated Power, Minimum 5. Peak Transmission: 80%, Minimum 6. Total Cutting Width: 1.0 Meter Minimum 7. Noise Emitted: 95 Db, Maximum 8. Complete With Throttle Lever And Clutch Lever On The Handle Bar 9. The Unit Should Be Painted Finish, With Rust-proofing Primer And Final Paint Color 10. With The Following Standard Heavy Duty Tools And Accesories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. Provide With Extra 2 Liters Engine Oil 11. Provide Reflectorized And Water Resistant Da-rice Logo (4" X 4") 12. Conform To Paes/pabes 347:2022 13. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 4 2 Number Rice Mill (single Pass) 1,150,000.00 2,300,000.00 Technical Specifications: 1. Rubber Roll Dehuller 2. Input Capacity: Minimum Of 0.5 Ton/hr At 98% Purity 3. Hulling Efficiency: 75% Minimum 4. Prime Mover: 23 Hp Diesel Engine (minimum), Watercooled With Brand New Battery (atleast 3sm) 5. Milling Recovery Index: 0.98 Min. 6. Percent Head Rice Index: 0.90 Min. 7. With Protection For All Moving Parts 8. With Pre-cleaner A. Input Capacity: Should Be Compatible With The Hulling Capacity Of The Units To Be Supplied (375kg/hr Minimum) 9. With Trailer A. Steel Made Channel Reinforced By Steel Angular Bars B. Leaf Spring Suspension System C. With Brand New Tires (pneumatic) D. With Reflectorized Slow Moving Vehicle Emblem 10. With Bucket Elevator A. Material: Plastic 11. With The Following Standard Heavy Duty Tools And Accessories: A. One (1) Unit Weighing Scale With 500kg Capacity Minimum B. One (1) Piece Calibrated Grain Moisture Monitoring Device (portable Handheld Moisture Meter) J. Grain: Paddy And Rice Ii. Type: Capacitance Iii. User’s Manual In English C. With Fire Extinguisher For Fire Caused By Flammable Liquids I .class B Ii. Six (6) Liters Capacity D. Open Wrench Set E. Adjustable Wrench (12") F. Grease Gun G. Philips And Flat Screw Driver H. Roll Up Tools Holder I. Provide Personalized/ Fitted Material (water Resistant) For Covering J. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves K. Provide With Electric Driven Power Sprayer/ Pressure Washer Automatic Type L. Provide With Electric Blower That Has Minimum Of 700w Rated Input Power M. Provide With Extra 2 Liters Engine Oil 12. Provide Operation Equipment Manual 13. Provide Reflectorized And Water Resistant Da-rice Logo (6" X 6") 14. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Terms And Conditions: A During The Opening Of Bids, Bidders Shall Submit: 1 Certificate Of Accredited Service Center Within The Region That Could Respond Within 72 Hours (including Holidays And Weekends) Upon Request Of The End-user/beneficiary; 2 Namdac Certificate Of Accreditation; 3 Section Vii (technical Specifications) Of Bidding Document, Which Must Be Signed And Sealed By Licensed Agricultural Engineer/agricultural Biosystems Engineer; 4 Valid Amtec Test Report: I. Recirculating Dryer With A Similar Drying System Conform To The Pns.paes 201:2015 Standard For Moisture Gradient, Drying Rate, Product Quality, Drying Loss/spillage, Drying Efficiency, And Heating System Efficiency. Should Be Provided With Separate Amtec Test Report For Both Heating System. Ii. Engine Iii. Float-assist Type Walking Type Tractor (floating Tiller) Coupled With The Offered Engine Iv. Mechanical Rice Transplanter (walk-behind) Coupled With The Offered Engine V. Rice Mill (single Pass) Coupled With The Offered Engine 5 Warranty Certificate For Services, Parts, And Other Components Due To Manufacturing Defects Upon Acceptance With Minimum Of Two (2) Years For Lot 1 Only; 6 Warranty Certificate For The Machinery And Equipment Being Offerred For Lot 2, 3, & 4 Only: A. Minimum Of 1 Year For Engine From Date Of Acceptance B. Minimum Of 1 Year On Parts And Services From Date Of Acceptance. 7 Valid Certificate Of Dealership/distributorship/authority To Sell; 8 Certification Guaranteed Spare Parts Availability For At Least Five (5) Years For Lot 1 Only; 9 Permit To Operate (pto) From Bafe; B During Post-qualification, The Bidder Shall Submit: 1 Provide Certification Of Very Satisfactory Performance Of The Recirculating Dryer Being Offered As To: I) Machinery Performance; Ii) Machinery Durability And; Iii) Availability Of Parts And Service, Issued By Any Government Or Private Company Agency/company In Asian Countries, Excluding Da-rfo8, Duly Signed By The Current Head Of Agency/company Within The Last One (1) Year. The Bidder Shall Provide List Of Five (5) Customer/clients With Addresses And Contact Numbers, And Certification From At Least One (1) Customer/client Issued By Any Government For Lot 1 Only; 2 Manufacturer's Distributor's Or Bidder's Certification That The Proposed Grain Dryer Brand Has Been In The Market For The Last 5 Years, Accompanied Or Duly Supported By Documentary Proof. The Documentary Proof Must Be Verifiable Through Phone Call, Ocular Inspection Or Both, Covering The Period Beginning From 2019 Or Erlier And Maybe Any Or A Combination Of The Following (for Lot 1 Only): A. Record Of Sales B. Dealership Or Servicing Agreements Indicating The Brand Subject Thereof C. Manufacturer's Or Distributor's Certification Of Market Presence, Indicating The Name/s And Address/es Of The Dealers D. Bill Of Lading And/or Other Similar Records Indicating Shipment Or Delivery Of The Grain Dryer Brand To The Philippines E. Client's Affidavit Indicating Client's Complete Address And Telephone Number, Brand, Type, And Model Of Grain Dryer, Date Of Purchase And Duly Supported By Physical Proof Of Grain Dryer 3 Copy Of Equipment Manufacturer's Manual (in English) For Lot 1 Only: A. Recirculating Dryer Unit And Each Component Such As Drying Unit, Drying System, Generator Set, And Portable Handheld Moisture Meter Written In English/filipino 4 Certificate Of Conformity From Bafe I. Recirculating Dryer Ii. Mechanical Rice Transplanter (walk-behind) Iii. Float-assist Type Walking Type Tractor (floating Tiller) Iv. Rice Mill (single Pass) C Winning Bidder/s Shall: 1 Deliver And Install Genuine, Unaltered, And Brand New Units; 2 Conduct Formal Training, After Complete Delivery And Installation Of The Items, For The Operation And Maintenance Of The Equipment To At Least Two (2) Operators And Provide Copies Of The Training Module Written In English/filipino; 3 Deliver And Install (if Necessary) The Units To The Intended Recipients As Indicated In The Attached List Of Delivery Points Upon Receipt Of Ntp. Lot 1: Within 60 Calendar Days Lot 2: Within 30 Calendar Days Lot 3: Within 20 Calendar Days Lot 4: Within 60 Calendar Days 4 Shoulder The Delivery And Handling Cost To The Specified Drop-off Point, Materials For Testing, Fuels, And Other Necessary Requirements. 5 Inform The End-user And General Services Section (gss) Seven (7) Calendar Days Prior To The Schedule Of Delivery; 6 Non-stainless Material Should Be Painted With Rust-proofing Primer And Final Paint Color For Lot 1 Only D Any Delay Of Delivery Of Item Shall Be Subjected To Liquidated Damges Equivalent To 1/10 Of 1% Of The Contract Price Per Day Of Delay Of The Undelivered Items; E Payment Scheme: A. 100% Payment Shall Be Made Upon Complete Delivery, Inspection, Amtec System Testing (test Report With Acceptable Rating), After The Conduct Of Training In The Operation And Maintenance Of The Machineries And Equipment; And Acceptance Per Lot F Winning Bidder/s Shall Submit A Snapshot Of Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. 5. Prospective Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 09 To December 03, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee, Pursuant To The Latest Guidelines Issued By The Gppb. The Cost Of The Bidding Documents Shall Correspond To The Total Abc Of The Selected Lot/s On Which The Supplier Intends To Bid, With A Range As Indicated In The Table Below. Approved Budget For The Contract Maximum Cost Of Bidding Documents (in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On November 19, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City And Through Face To Face Or Video Conferencing Or Webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 03, 2024, 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 10. Bid Opening Shall Be On December 03, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend Either Physically Or Through Video Conferencing Via Google Meet. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan, Jd Chairman, Bids And Awards Committee
Oriental Mindoro Tender
Automobiles and Auto Parts
Philippines
Closing Soon26 Nov 2024
Tender AmountPHP 1.9 Million (USD 33.8 K)
Details: Description Invitation To Bid Purchase Of Vehicle Parts And Accessories For Repair And Maintenance Of Various Provincial Heavy Equipment Ib No. Gsa 2024-11-074 1. The Provincial Government Of Oriental Mindoro, Through The General Fund Intends To Apply The Sum Of One Million Nine Hundred Ninety Eight Thousand Nine Hundred Twenty Nine Pesos Only (php 1,998,929.00) Being The Abc To Payments Under The Contract For Purchase Of Vehicle Parts And Accessories For Repair And Maintenance Of Various Provincial Heavy Equipment. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro – Procurement Division Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Seven (7) Calendar Days Upon Signing Of The Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Item Description Qty./unit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 Dt # 06, Isuzu 6bg1 Pn: 2000-06-010-0084-8751 Hydrovac Assy. Dt # 10, Isuzu 6bg1 Pn: 2011-05-080-0107-8751 Clearance Light 24v Insulator Hose 3/8 Electrical Tape C/b Repair Kit, 22mm U-bolt, 9/16 X 2-7/8 X 5” Auto Wire #16 Plug-in Fuse Dt #11, Isuzu 6bg1 Pn: 2011-05-080-0105-8751 Oil Seal Propeller Bolts Battery Cable Pilot Bearing Pinion Oil Seal Liquid Gasket 1104 Hub Oil Seal, Outer Rr Hub Oil Seal, Inner Rr Starter Button Penetrating Fluid Auto Wire #14 Battery Lug Rivets Rubber Cap, 1-7/16” Sand Paper Continuation On Next Page Air Horn Switch Dt # 12, Isuzu 6bg1 Pn: 2011-05-080-0106-8751 Hydraulic Jack 15t Air Horn Switch Alternator Assy. 24v Clutch Booster Assy. 70mm Cog Belt, B-46 Dt # 13, Hino W04d Pn: 2012-05-080-0104-8751 Mudguard 24” Dt # 15, Hino Wo4d Pn: 2012-05-080-0101-8751 Tires W/ Inner Tube & Flap, 8.25 X 16 Tail Light Assy. 24v Steel Epoxy Rubber Cap, 1-3/16” Penetrating Fluid Gasket Maker Sand Paper Electrical Tape Brake Lining 4” Brake Lining 4-1/2” Spray Paint Dt # 16, Hino W04d Pn: 2012-05-080-0102-8751 Signal Light Assy. Dt # 18, Sinotruk Howo Pn: 2021-05-080-0089-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 19, Sinotruk Howo Pn: 2021-05-080-0092-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 20, Sinotruk Howo Pn: 2021-05-080-0093-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt #21, Sinotruk Howo Pn: 2021-05-080-0090-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Auto Wire #14 Continuation On Next Page Dt # 22, Sinotruk Howo Pn: 2021-05-080-0086-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 23, Sinotruk Howo Pn: 2021-05-080-0094-8751 Battery 4d Battery Terminal Battery Cable Battery Lug Auto Wire #12 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt# 24, Sinotrijk Howo Pn: 2021-05-080-0091-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 25, Sinotrijk Howo Pn: 2021-05-080-0087-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 26, Sinotruk Howo Pn: 2021-05-080-0088-8751 Hub Bearing, Inner Frt Hub Bearing, Outer Frt Hub Oil Seal, 140-160-14 Dt # 28, Sinotruk Howo Pn: 2023-05-080-0009-8751 Battery 4d Battery Terminal Isuzu 4bd1, Tadano Pn: 2015-05-080-0133-8751 Relay W/ Socket 24v Bd # 10, Komatsu D65e Pn: 2010-05-080-0117-8751 Battery Relay, Negative Ampere Gauge Ignition Switch Auto Wire #10 Electrical Tape Battery 4d Battery Terminal Bh # 5d, Lonking Cdm6225 Pn: 2021 -05-080-0095-8751 Continuation On Next Page Left Hydraulic Pressure Pump Assy. Rg # 3c, Komatsu Gd313 Pn: 2015-05-080-0127-8751 Hose 3/8” Grease Fittings Round Mirror Wiper Blade 17” Clear Silicon Penetrating Fluid Oil Seal, 30-50-10 Sand Paper Rr# 1e, Sakai Pn: 2012-05-080-0130-8751 Coolant Spray Paint Pm # 15, Hino Profia Pn: 2020-05-080-0131-8751 Air Horn 24v Air Hose Auto Wire #16 Electrical Tape Relay W/ Socket 24v Spray Paint X-x-x 2 Pcs 10 Pcs 15 Mtrs 2 Pcs 1 Pc 2 Pcs 1 Roll 10 Pcs 1 Pc 4 Pcs 4 Mtrs 1 Pc 1 Pc 1 Pc 2 Pcs 2 Pcs 1 Pc 4 Pcs 5 Mtrs 4 Pcs 1 Set 4 Pcs 2 Pcs 1 Pc 1 Pc 1 Pc 1 Pc 1 Pc 2 Pcs 6 Ft 2 Pcs 1 Set 1 Pc 12 Pcs 1 Pc 1 Pc 3 Pcs 2 Pcs 4 Pcs 4 Pcs 1 Pc 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 4 Mtrs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 4 Pcs 2 Mtrs 2 Pcs 4 Mtrs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 2 Pcs 4 Pcs 1 Pc 1 Pc 1 Pc 1 Pc 10 Mtrs 1 Pc 2 Pcs 4 Pcs 1 Pc 1 Ft 10 Pcs 2 Pcs 1 Pc 1 Pc 1 Pc 1 Pc 4 Pcs 4 Pcs 4 Pcs 1 Pc 3 Mtrs 6 Mtrs 1 Pc 1 Pc 1 Pc 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Activities Schedule Advertisement/posting Of Ib November 7, 2024 Bulletin Board Of The Pgom November 7, 2024 Pgom Website – Www.ormindoro.gov.ph November 7, 2024 Geps Website – Www.philgeps.net November 7, 2024 Issuance Of Bidding Documents November 7, 2024 To November 26, 2024 Pre-bid Conference November 14, 2024 At 10:00 Am Ppeso Conference Room Deadline Of Submission Of Bids November 26, 2024 At 9:30 Am At Procurement Division Opening Of Bids In Sealed Envelope November 26, 2024 At 10:00 Am At Ppeso Conference Room A) Eligibility Requirements And Technical Proposal November 26, 2024 At 10:00 Am At Ppeso Conference Room B) Financial Proposal November 26, 2024 At 10:00 Am At Ppeso Conference Room 4. Prospective Bidders May Obtain Further Information From Provincial Government Of Oriental Mindoro-procurement Division And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 7, 2024 To November 26, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Provincial Government Of Oriental Mindoro-procurement Division Will Hold A Pre-bid Conference On November 14, 2024 At 10:00 Am At Ppeso Conference Room, Provincial Capitol Complex, Camilmil Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Procurement Division, On Or Before November 27, 2024 At 9:30 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 27, 2024 At 10:00 Am At Ppeso Conference Room, Provincial Capitol Complex, Camilmil Calapan City Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Pgom – Procurement Division Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Marissa O. Acuzar Procurement Division – Goods And Services Provincial Capitol Complex Camilmil, Calapan City Oriental Mindoro 5200 Antonio M. Magnaye, Jr. Bac Chairperson
BARANGAY BUENAVISTA QUINAPONDAN EASTERN SAMAR Tender
Civil And Construction...+1Civil Works Others
Philippines
Closing Date10 Dec 2024
Tender AmountPHP 220.9 K (USD 3.7 K)
Details: Description The Barangay Government Of Brgy. Buenavista, Through Its Bids And Awards Committee (bac), Intends To Apply The Sum Of Two Hundred Twenty Thousand Nine Hundred Thirty Four Pesos And 51/100 (php 220,934.51), Under The 20% Barangay Fund Of The Approved Annual Budget Cy 2024, Being The Approved Budget For The Contract (abc), To Payment Under The Contract For The Improvement Of Civic Center (provision Of Gates And Toilet Doors At Brgy. Buenavista, Quinapondan, Eastern Samar. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Barangay Government Of Brgy. Buenavista, Through Its Bids And Awards Committee (bac), Now Invites Bids For The Improvement Of Civic Center (provision Of Gates And Toilet Doors At Brgy. Buenavista, Quinapondan, Eastern Samar. Delivery Of Goods Is Required Ten (10) Days From Receipt Of Notice To Proceed. Bidders Should Have Completed Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Duration Of Work Is Twenty One (21) Working Days. Item Description: I. Billboard 1.00 Set Ii. Masonry Works 3.33 Sqm Iii. Steel Works 7.00 Sets Iv. Paint Works 1.00 Lot Schedule Of Activities Is Listed As Follows: 1. Advertisement/ Posting: November 19, 2024 – November 26, 2024 2. Issuance Of Bidding Documents: November 20, 2024 – December 10, 2024 3. Deadline Of Submission Of Bids: December 10, 2024 @ 9:00am 4. Bid Opening/ Evaluation: December 10, 2024 @ 9:00am 5. Post Qualification: December 12, 2024 6. Resolution To Award: December 13, 2024 Interested Bidders May Obtain Further Information From The Bids And Awards Committee Of Brgy. Buenavista, Quinapondan, Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Mondays Through Fridays From 8:00 A.m. To 5:00 P.m. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders Starting On November 20, 2024 Until December 10, 2024 From The Address Below And Upon Payment Of Nonrefundable Fee For The Bidding Documents In The Amount Of Five Hundred Pesos (php 500.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Bids Must Be Delivered To The Address Below On Or Before 9:00 O’clock In The Morninng At The Brgy. Hall Of Brgy. Buenavista, Quinapondan, Eastern Samar On December 10, 2024. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18.1. Bid Opening Shall Be On December 10, 2024, Immediately After 9:00 O’clock In The Morning, Following The Deadline Set For The Submission And Receipt Of Bids, At The Brgy. Hall Of Brgy. Buenavista, Quinapondan, Eastern Samar. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. The Bids And Awards Committee Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Contact Elenita C. Tejero At The Following Address: Bids And Awards Committee Elenita C. Tejero Brgy. Buenavista, Quinapondan, Eastern Samar Contact No.: 09122010015 Prepared By: (sgd) Hon. Elenita C. Tejero Bac Chairman Approved By: (sgd) Hon. Elmer O. Escala Punong Barangay
City Government Of Dasmari as Cavite Tender
Electrical Goods and Equipments...+2Textile, Apparel and Footwear, Electrical and Electronics
Philippines
Closing Soon25 Nov 2024
Tender AmountPHP 922.5 K (USD 15.6 K)
Details: Description The Bids And Awards Committee Of The City Of Dasmariñas Invites Interested Bidders To Submit Price Quotations For The Following: Joshbac2024 Pr No.: 24 11 3507 1. City Talents …………………………………………………………………… 8sets Fairy Dress Pannier Petticoat Headdress Strip Lights Management Of Props Post Event Clean Up Pr No.: 24 11 3503 2. City Talents ……………………………………………………………………….8sets Corded Gown Led Fiireballs Fairy Lights Headdress Management Of Props Post Event Clean Up Pr No.: 24 11 3502 3. City Talents …………………………………………………………..8sets Metallic Stretch Body Suit Metallic Leggings 4 Lighted Flower Bloom Skirt Strip Lights Fairy Lights 4 Bubble Guns Management Of Props Post Event Clean Up Pr No.: 24 11 3501 4. City Talents ……………………………………………………………8sets Metallic Stretch Body Suit Headdress Strip Lights Fairy Lights Management Of Props Post Event Clean Up Pr No.: 24 11 3500 5. City Talents …………………………………………………………..8sets Metallic Stretch Body Suit Lighted Fan Skirt 1 Yard X 3 Yards Strip Lights Headdress Fairy Lights Management Of Props Post Event Clean Up Pr No.: 24 11 3499 6. City Talents …………………………………………………………..8sets Metallic Stretch 2 Piece Body Suit Lighted Hoops Fiber Optic Accent Management Of Props Post Event Clean Up Pr No.: 24 11 3498 7. City Talents ………………………………………………………………………. 8sets Metallic Coat Wire Frame Peacock Fan Strip Lights Installation Led Lights Management Of Props Post Event Clean Up Pr No.: 24 11 3497 8. City Talents …………………………………………………………..8sets Metallic Stretch Body Suit Wire Frame Body Armor Costume Flare Leg Warmers 3 Umbrellas 5 Bubble Guns Gloves Strip Lights Installation Management Of Props Post Event Clean Up Pr No.: 24 11 3496 9. Spm Costumes ……………………………………………….21sets Cloak Costumes Pr No.: 24 11 3495 10. Spm Costumes ……………………………………………….21sets Polo Sublimation Fabric Pr No.: 24 11 3494 11. Dancers Costume ……………………………………………..10sets Dress Flower Applique Painted Fabric Pr No.: 24 11 3493 12. Hi-lux Decoration Stage ……………………………………………………..10units 10 Units Of Hi-lux Decoration Steel Provision Platform Provision Large Scale Decoration Large Scale Faux Flowers Faux Leaves Tivoli Lights Rope Lights Strip Lights 2 Days Of Use Installation And Dismantling Pr No.: 24 11 3492 13. Vip Costume (2 Sets) ………………………………………………………2sets Eva Form Pants And Coat 14. Vip Gown ……………………………………………………………..1set Orchids Applique Metallic Organza Embellishments Pr No.: 24 11 3531 15. Stage For City Event ………………………………………………1lot Backdrop Size 42ft. X 12ft. Wood Frame Structures Fabric Making Flower Arrangements Back Lights Strip Lights Stage Floor Flower Arrangements Special Instructions: 1. Please Click The Associated Components For The Checklist Of Documentary Requirements. 2. Request For Quotation Form Will Be Issued By The Bac Secretariat From November 20, 2024 To November 25, 2024 After Paying The Corresponding Bid Docs Fee Amounting To One Thousand Pesos (php1,000.00). 3. Deadline Of Submission Of Proposal Is On November 25, 2024, 10:00 A.m. At The Bac Secretariat Office, 2nd Floor, City Hall Of Dasmariñas. Late Bids Shall Not Be Accepted. 5. Opening Of Price Quotations Is On November 25, 2024, 11:00 A.m. At The Bac Secretariat Office, 2nd Floor, City Hall Of Dasmariñas. 6. The Proposal Together With The Documentary Requirements Of The Bidder Should Be Placed In A Long Brown Envelope, Properly Sealed, Labelled And Addressed To The Bac.
Provincial Government Of Aklan Tender
Textile, Apparel and Footwear...+1Machinery and Tools
Philippines
Closing Date3 Dec 2024
Tender AmountPHP 885.3 K (USD 14.9 K)
Details: Description 1. 10 Pcs. - Adjustable Squeegee Alloy W/ Handle W/ Foam For Glass Cleaning 2. 100 Btls. - Airfreshener (320 Ml) 3. 300 Pcs. - Bath Soap (25 Grms) 4. 600 Pcs. - Bath Soap, Anti Bacterial, 85 Grams 5. 20 Pairs - Battery (aa) 6. 50 Pairs - Battery (aaa) 7. 1000 Btls. - Bottled Water (500ml) 8. 50 Btls. - Bottled Water (6 Liters) 9. 5 Cans - Car Gel, Fresh Lemon, 70 Grams 10. 20 Packs - Coffee (200 Grms) 11. 400 Pcs. - Coffee (3in1 Original, Twin Pack) 12. 20 Packs - Coffee Creamer (450 Grms) 13. 25 Bots. - Colorsafe Liquid Bleach 900ml. (violet Color) 14. 625 Packs - Detergent Powder, Antibac., 550 Grams 15. 3325 Sachet - Dishwashing Liquid, Anti Bacterial, 50ml 16. 70 Pads - Dishwashing Sponge W/ Stripping Pad, Heavy Duty 17. 30 Btls. - Dishwashing Liquid (250ml) 18. 100 Pcs. - Door Mat Cloth, Heavy Duty 19. 300 Pcs. - Fabric Conditioner (800ml) 20. 1100 Sachet - Fabric Conditioner, Antibac, 38ml. 21. 150 Packs - Garbage Bag Black M (11 X 11 X 24) 100's 22. 150 Packs - Garbage Bag Black Xxl (18.5 X 18.5 X 40) 100's 23. 80 Packs - Garbage Bag Green M (11 X 11 X 24) 100's 24. 100 Packs - Garbage Bag Green Xxl (18.5 X 18.5 X 40) 100's 25. 125 Packs - Garbage Bag Yellow M (11 X 11 X24) 100's 26. 114 Packs - Garbage Bag Yellow Xxl (18.5 X 18.5 X 40) 100's 27. 1000 Pcs. - Garbage Bag, Black (13x13x30) 28. 1000 Pcs. - Garbage Bag, Black (15x15x30) 29. 2000 Pcs. - Garbage Bag, Black (18.5x18.5x40) 30. 20 Btls. - Glass Cleaner (500 Ml) 31. 30 Btls. - Insecticide Spray (500 Ml) 32. 50 Gals - Laundry Disinfectant Liquid (color Safe, 1 Gal.) 33. 50 Gals - Laundry Disinfectant Liquid (original, 1 Gal.) 34. 200 Kgs. - Laundry Soap Powder (1 Kg/bag) 35. 10 Pcs. - Lavatory Flexible Hose (1/2 X 1/2 X 12) 36. 50 Pcs. - Led Bulb (9w Daylight) 37. 90 Gals - Liquid Bleach, Floral Scent (3.785l) 38. 50 Btls. - Liquid Laundry Soap (1 Liter) 39. 3 Gals - Metal Primer Paint (gray Oxide 4ltr./gal.) 40. 125 Pcs. - Mop Head Cloth (strip Cloth) 41. 25 Sets - Mop With Handle & Head Cloth, Interchangeable 42. 50 Packs - Paper Cups (50pcs/pack) 43. 50 Pads - Scouring Pads W/ Sponge (5m) 44. 300 Pcs. - Shampoo (4in1/sachet) 45. 110 Pcs. - Softbroom, Thick, Heavy Duty 46. 25 Pcs. - Stick Broom, Thick, Heavy Duty 47. 100 Pads - Stripping Pad 1" Thick, Heavy Duty, Branded 48. 20 Kls. - Sugar (1kg) 49. 20 Pcs. - Toilet Bowl Brush, Steel Handle, Round Brush, Heavy Duty 50. 100 Btls. - Toilet Bowl Cleaner (500ml) 51. 300 Pcs. - Toilet Deodorizer, Lemon, 100 Grams 52. 500 Rolls - Toilet Paper 2 Ply, Individually Pack 53. 25 Pcs. - Toilet Pump, Rubber With Handle, Heavy Duty 54. 20 Btls. - Wood Polisher X-x-x
MUNICIPALITY OF LAPINIG, NORTHERN SAMAR Tender
Civil And Construction...+2Civil Works Others, Construction Material
Philippines
Closing Soon29 Nov 2024
Tender AmountPHP 100.5 K (USD 1.7 K)
Details: Description Republic Of The Philippines Province Of Northern Samar Municipality Of Lapinig Bids And Awards Committee Invitation For Negotiated Procurement Construction Of Farrowing Pen Goods-np2024-015 1. In View Of The Two (2) Public Biddings, The Municipal Government Of Lapinig, N. Samar Through Its Bids And Awards Committee (bac) Invites Interested Bidders To Participate In The Negotiation For The Project, “construction Of Farrowing Pen” In Accordance With Section 53.1 Of The Revised Implementing Rules And Regulations (irr) Of Republic Act (r.a.) No. 9184, Otherwise Known As The “government Procurement Reform Act.” The Approved Budget For The Contract (abc) Is One Hundred Thousand Five Hundred Seventy-five Pesos Only (php 100,575.00). For More Details On This Project, Please Refer To Attached Schedule Of Requirements (annex A) And Technical Specifications (annex B). 2. The Following Eligibility And Technical Documents, As Well As The Financial Proposal Form (annex C) Shall Be Submitted On November 29, 2024, Before 2:00 Pm At The Conference Room, Annex Bldg. Mun. Hall, Lapinig, N. Samar: A. Philgeps Membership Certificate (platinum) Or In The Absence Of Philgeps Certificate, Bidder May Opt To The Following: I. Dti Business Name Registration Or Sec Registration Certificate Or Cooperative Development Authority. Ii. Valid And Current Mayor’s Permit/license To Operate Iii. Tax Clearance Per Executive Order 398, Series Of 2005 As Finally, Reviewed And Approved By The Bir. Iv. Audited Financial Statements B. Statement Of All Ongoing Government And Private Contracts C. Bid Security Issued In Favor Of The Municipal Government Of Lapinig Shall Be Either In The Following Forms And Amount: I. 2% Of The Abc, If Cash Or Cashier’s//manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank; Ii. 5% Of The Abc, If Survey Bond With Certification From Insurance Commission That Such Insurance Company Is Authorized To Issue Such Security; Iii. Bid Securing Declaration. Sample Form Is Attached As Annex D. D. Compliance With The Schedule Of Requirements (annex A) And Technical Specifications (annex B); E. Notarized Omnibus Sworn Statement (form – Annex E); F. Authority Of The Signatory; 3. Opening Of The Eligibility Documents, Technical Documents And Financial Proposal Will Be On November 29, 2024, Before 2:00 Pm. 4. For Further Information, You May Contact Bac Secretariat At 09526174315 From 8:00 A.m. To 5:00 P.m. (working Days And Hours Only). 5. The Municipal Government Of Lapinig Northern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 6. For Further Information, Please Refer To: Ma. Devorah D. Cidro Bac Secretariat Municipal Budget Office, 2nd Floor, Mun. Hall, Lapinig,northern Samar Cp # 09526174315 (sgd)engr. Angeles M. Maestre Bac Chairperson Description Qty. Uom Total 1 1/2" G.i Pipe S-40 5 Pcs 1 1/4" G.i. Pipe S-40 6 Pcs 1" G.i Pipe S-40 8 Pcs 1/2" G.i. Pipe S-40 8 Pcs 6013 Welding Rod 6 Kgs. 4" Cutting Disc 15 Pcs 4" Grinding Stone 2 Pcs Epoxy Primer 2 Liter 3" Paint Brush 2 Pcs Lacquer Thinner 2 Bot. Cement 27 Bags Sand 2.5 Cu.m. Gravel 2 Cu.m. 10mm Rsb 52 Pcs G.i. Tie Wire Ga.16 4 Kgs. 4" Chb 330 Pcs 1/4" Ordinary Plywood 3 Shts 2"x3"x3m Coco Lumber 120 Pcs C.w. Nail (assorted) 6 Kgs.
PKP S A Tender
Others...+1Electrical and Electronics
Poland
Closing Date5 Dec 2024
Tender AmountNA
Details: Development of Design Documentation for the Renovation of Roof Skylights, Deglazing of Window and Door Openings with Steel Frames, Glazing with Polycarbonate No. of Min. Thickness 10 Mm, Cleaning, Degreasing, Painting of the Frame Structure. Protection of the Roof Slope for the Duration of the Work.
Department Of Public Works And Highways Tender
Civil And Construction...+1Building Construction
Philippines
Closing Soon26 Nov 2024
Tender AmountPHP 17.9 Million (USD 303.2 K)
Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00126 (re-advertisement) : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep) - Rural Health Units (rural Health Unit): 1. Completion/ Equipping Of Super Health Centers Echague Super Health Center Echague, Isabela - 2. Completion/ Equipping Of Super Health Centers San Mateo Super Health Center San Mateo, Isabela - 3. Completion/ Equipping Of Super Health Centers San Isidro Super Health Center San Isidro, Isabela 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱17,910,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00126: Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep) - Rural Health Units (rural Health Unit): 1. Completion/ Equipping Of Super Health Centers Echague Super Health Center Echague, Isabela - 2. Completion/ Equipping Of Super Health Centers San Mateo Super Health Center San Mateo, Isabela - 3. Completion/ Equipping Of Super Health Centers San Isidro Super Health Center San Isidro, Isabela. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Project Name Abc 1 Completion/ Equipping Of Super Health Centers Echague Super Health Center Echague, Isabela ₱ 5,970,000.00 2 Completion/ Equipping Of Super Health Centers San Mateo Super Health Center San Mateo, Isabela ₱ 5,970,000.00 3 Completion/ Equipping Of Super Health Centers San Isidro Super Health Center San Isidro, Isabela ₱ 5,970,000.00 Total Abc ₱ 17,910,000.00 Note: 1. The Bidder Must Bid All Projects Provided That The Bid Amount Per Project Must Not Exceed Its Corresponding Abc. 2. The Bidder Must Include In Its Financial Document The Respective Bill Of Quantities And Detailed Estimates Per Project. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep) - Rural Health Units (rural Health Unit): 1. Completion/ Equipping Of Super Health Centers Echague Super Health Center Echague, Isabela - 2. Completion/ Equipping Of Super Health Centers San Mateo Super Health Center San Mateo, Isabela - 3. Completion/ Equipping Of Super Health Centers San Isidro Super Health Center San Isidro, Isabela Contract Id No. : 24b00126 Location : Isabela Brief Project Description : Construction Of Patient's Waiting Area, Powerhouse, Ambulance Bay, Placenta Vault, Sharps And Needles Vault And Catch Basin, Improvement Of Ramp, Installation Of Sewer Lines, Storm Drainage, And Water Line System, Electrical Works, Fire Alarm And Air Conditioning Unit, Construction Of Cabinets Scope Of Works : Other General Requirement • Permits And Clearances • Project Billboard / Signboard • Occupational Safety And Health Program • Mobilization/demobilization Earthworks • Removal Of Structures And Obstruction • Excavation (surplus Common, Structure) • Embankment (from Structure Excavation And Borrow) • Gravel Fill • Subgrade Preparation Subbase And Base Course • Aggregate Subbase Course Surface Courses • Pccp – 0.15 M Thick, 14 Day Concrete Plain And Reinforced Concrete Works • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed) Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Catch Basin • Sewer Line Works • Storm Drainage And Downspout • Sanitary/plumbing Fixtures • Cold Water Lines • Ceiling (aluminum Metal Cladding) • Ceiling (4.5mm Thick Ficem Board, Prepainted Metal Panel) On Metal Frame • Wall • Carpentry And Joinery Works • Finishing Hardware • Fire Rated Fire Exit Steel Door • Steel Doors And Frames • Aluminum Glass Windows (sliding, Awning & Fixed) Type • Roll-up Door (steel) • Special Performance Glass Or Processed Glass - 10mm Thk • Fabricated Metal Roofing Accessory, 0.60 Mm, (flashing And Gutters) • Waterproofing, Liquid • (glazed, Unglazed & Granite) Tiles • Vinyl Tiles (anti-bacterial) • Cement (plaster, Broom, Floor) Finish • Stamped Concrete • Non -slip Finish • Decorative Stones • Painting Works, (masonry/concrete, Wood, Steel) • Metal Deck Panel • Pvc Doors And Frames • Reflective Insulation • Chb Non-load Bearing (including Reinforcing Steel) (100mm & 150mm) • Louver Block • Metal Structure Accessories, (turnbuckle, Bolts And Rods, Sagrods, Cross Bracing & Steel Plates) • Structural Steel (purlins) • Stainless Steel Railing Electrical Works • Rigid Polyvinyl Chloride Pipes (pvc/upvc) – (20, 25, 65 & 90) Mm Dia. • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Electric Wire (2.0, 3.5, 5.5, 14.0, 30.0, 80.0, 125.0) Mm² Tw/thhn/thwn - Stranded) • Single Pole Wall Switch On One Switch Plate • Duplex (2 Single Pole Wall Switches On One Switch Plate) • Triplex (3 Single Pole Wall Switches On One Switch Plate) • Single Convenience Outlet/receptacle, Grounding Type (gt) • Duplex Convenience Outlets/receptacles (gt) • Heavy Duty Convenience Outlet/receptacle, Grounding Type • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Pole Mounted Power Transformer (oisc) With Complete Accessories, Single Or Three Phase, Pole Type Or Flatform • Generator Single Or Three Phase Stand-by • Lighting Fixtures • Rc Pole Mechanical Works • Exhaust Fan, (wall Mounted) • Water Tank, Stainless • (ventilating, Water Pumping, Fire Alarm & Air Conditioning) System Approved Budget For The Contract (abc) : ₱17,910,000.00 Contract Duration : 85 Calendar Days Inclusive Of 6 Unworkable/rainy Days, 19 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Small B For Buildings. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 6 - 26, 2024, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty Five Thousand Pesos Only (₱25,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On November 13, 2024, 1:00 Pm At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before November 26, 2024 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On November 26, 2024, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: November 6 -12, 2024 Conspicuous Place (procurement Bulletin Board): November 6 -12, 2024
4451-4460 of 4621 active Tenders