Painting Tenders

Details: Description Invitation To Bid For 25ei0122 - Construction (completion) Of Multi-purpose Building At Barangay Lisap, Bongabong, Oriental Mindoro, Phase Ii 1. The Dpwh - Southern Mindoro District Engineering Office, Through Nep 2025 Intends To Apply The Sum Of Php 2,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction (completion) Of Multi-purpose Building At Barangay Lisap, Bongabong, Oriental Mindoro, Phase Ii/25ei0122. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction (completion) Of Multi-purpose Building At Barangay Lisap, Bongabong, Oriental Mindoro, Phase Ii Contract Id No. : 25ei0122 Locations : Bongabong, Oriental Mindoro, Phase Ii Scope Of Works : Completion Of 1-unit Multti-purpose Building. This Includes Additional Concrete Works (moulding Of Windows & Kitchen Countertop), Paintings, Ceiling Works, Tile Works, Septic Tank, Cistern, Water Pumping System, Electrical & Mechanical Works. Installation Of Stainless Steel Signages, Decorative Stone, Railing, Fire Escape Ladder, Plumbing Fixtures, Windows, Kitchen Cabinet, Downspout, Catch Basin, Sewer Lines, Cold Water Lines, And Replacement Of Gutter Are Also Included. Approved Budget For The Contract : Php 2,970,000.00 Contract Duration : 120 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D, B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 27, 2024 - January 16, 2025 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 3,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On January 3, 2025 At 10:00 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before January 16, 2025 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On January 16, 2025 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Emmanuel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson

Details: Description Invitation To Bid For Improvement Of Guardhouse At Magsiko Peak, Atotes The Municipality Of Bindoy, Through The Mun. Supplemental Budget Cy 2024 20% Df Intends To Apply The Sum Of Six Hundred Seventen Thousand Five Hundred Thirty-two & 50/100 Pesos (p 617,532.50) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Improvement Of Guardhouse At Magsiko Peak, Atotes, Bindoy, Negros Oriental. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Municipality Of Bindoy Through Its Bids And Awards Committee (bac), Now Invites Bids From Eligible Bidders To Enter Into Contract Based On Award For The Purchase Of Construction Materials On Dec. 26, 2024 - Jan. 20, 2025. Stock No. Items/description Qty Unit 1 Portland Cement Portland Cement Sand Gravel Fine Gravel G.i. Tie Wire #16 16mm Dia. X 6.0m Rebars 12mm Dia. X 6.0m Rebars 10mm Dia. X 6.0m Rebars ¼” Marine Plywood 2”x2”x12’ Coco Lumber (300 Pcs) 2”x3”x12’ Coco Lumber (240 Pcs) 2”x4”x12’ Coco Lumber (240 Pcs) 4” Cw Nails 3” Cw Nails 2-1/2” Cw Nails 1-1/2” Cw Nails Zinc Chromate & Phosphate Epoxy Primer Lacquer Thinner Paint Brush, 1” 145 Bags 2 Sand 13 Cu.m. 3 4” G.i. Pipe X 6.0 Mtr Schedule 20 3 Pcs 4 Hi-rib 0.50mm X 1.090m X 6.30m 6 Pcs 5 Tile Roof 0.50mm X 1.090m X 3.15m 56.70 I.m 6 Tile Roof 0.50mm X 1.090m X 2.15m 6.45 I.m 7 End Flashing 0.50mm X 2.4m 11 I.m 8 6” X 6.0m C-purlins 9 Lgths 9 1.2mm X 3” X 4” X 8ft Rectangular Tube 27 Lgths 10 1.2mm X 2.5” X 2.5” X 8ft Square Tube 27 Lgths 11 Welding Rod 15 Kgs 12 Wire Screen 1 Rolls 13 16mm Dia. X 6.0m Rebars 5 Lgths 14 15 12mm Dia. X 6.0m Rebars 30 Lgths 15 10mm Dia. X 6.0m Rebars 10 Lgths 16 G.i Tie Wire #16 3 Kgs 17 Expansion Bolt 5/8 40 Pcs 18 Tekscrew 2.5” 250 Pcs 19 (0.90m X 2.10m X 1/2 Inch Thk) Single Panel Swing Door With Aluminum Tube Jam And Accessories 2 Units 20 (0.90m X 1.0m X 1/2 Inch Thk) Fixed Glass Header With Aluminum Tube Jam And Accesories 2 Units 21 (0.60m X 2.1m X 1/2 Inch Thk) Fixed Wall Glass With Rectangular Aluminum Tube Jam And Accessories 6 Unit 22 (0.60m X 1.0m X 1/2 Inch Thk) Fixed Glass Header With Rectangular Aluminum Tube Jam And Accessories 6 Unit 23 (1.0m X 2.1m X 1/2 Inch Thk) Fixed Wall Glass With Rectangular Aluminum Tube Jam And Accessories 3 Unit 24 (1.0m X 1.0m X 1/2 Inch Thk) Fixed Glass Header With Rectangular Aluminum Tube Jam And Accessories 3 Unit 25 (1.5m X 2.1m X 1/2 Inch Thk) Partition Sliding Glass With Aluminum Tube Jam And Accessories 4 Unit 26 (1.50m X 1.0m X 1/2 Inch Thk) Fixed Glass Header With Rectangular Aluminum Tube Jam And Accessories 4 Unit 27 Fiber Cement Board (hardiflex) 19 Shts 28 Angular Wall (2.4m/length) 20 Lgths Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On Dec. 26, 2024 - Jan. 20, 2025 From The Bac Secretariat Upon Payment Of The Applicable Fee For The Bidding Documents, Of One Thousand Pesos Only (p 1,000.00). Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before Dec. 26, 2024 - Jan. 20, 2025 At 1:30pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On January 20, 2025 At 2:00pm At The Office Of The Municipal Planning And Development Officer. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. The Municipality Of Bindoy Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Roberto L. Amaro Bac Chairman Office Of The Municipal Planning And Development Officer Poblacion, Bindoy, Negros Oriental Mobile Contact Nos. 09274958041

Details: Description Item No. Unit Item Description Quantity 1 Pcs Albatros 29 2 Gal Alcohol 68%-72% 1 Gallon 5 3 Bottle Alcohol 68%-72% 500ml 3 4 Pcs Air Freshener Spray 13 5 Bottle Bleach 1l 33 6 Pcs Arch File 3 Inch Long 7 7 Pcs Ballpen (black) 691 8 Pcs Ballpen (blue) 167 9 Pcs Ballpen (red) 38 10 Pcs Ballpen (green) 3 11 Pack Battery Aa 4pcs/pack 34 12 Pack Battery Aaa 4pcs/pack 20 13 Pcs Big Stapler (heavy Duty) 6 14 Box Spring Clip 2inch 6 15 Pcs Binder Spring 2 Inches 15 16 Pcs Binder Spring 1.5 Inches 9 17 Pcs Binder Spring 1 Inch 9 18 Ream Binder Clips 19mm Box 11 19 Pcs Binder Clips 25mm Box 10 20 Pcs Binder Clips 32mm Box 10 21 Pcs Binder Clips 42mm Box 17 22 Box Bond Paper (a4) 214 23 Box Bond Paper (long) 205 24 Box Bond Paper (short) 133 25 Box Bond Paper (legal) 8.5x14 19 26 Ream Bond Paper (a3) 6 27 Ream Box Filer 20 28 Ream Broom 23 29 Pcs Broomstick 15 30 Pcs Broom And Dust Pan Set 4 31 Bottle Brother Black Btd60 8 32 Bottle Brother Cyan Bt5000 7 33 Bottle Brother Magenta Bt5000 10 34 Bottle Brother Yellow Bt5000 7 35 Bottle Brother T700w (black) 2 36 Bottle Brother T700w (yellow) 1 37 Bottle Brother T700w (cyan) 1 38 Bottle Brother T700w (magenta) 1 39 Bottle Brother D60 (black) 5 40 Bottle Brother 5000 (yellow) 2 41 Bottle Brother 5000 (magenta) 2 42 Bottle Brother 5000 (cyan) 2 43 Pack Carbon Paper (permafilm) 10’s 3 44 Set Cartolina (assorted) 10pcs/set 2 45 Pcs Calculator 14 46 Pcs Cleaner, Toilet And Urinal 12 47 Pcs Combo Strip 1 Inch 40 48 Pcs Combo Strips 1.5 Inches 25 49 Pcs Combo Strips 2 Inches 13 50 Set Plastic Rings Comb (8mm) 100’s 41 51 Set Plastic Rings Comb (10mm) 100’s 41 52 Set Plastic Rings Comb (12mm) 100’s 41 53 Set Plastic Rings Comb (14mm) 100’s 41 54 Set Plastic Rings Comb (16mm) 100’s 1 55 Pcs Computer Mouse Wireless 8 56 Pcs Computer Mouse With Wire 2 57 Pcs Computer Keyboard (usb) 5 58 Box Continuous Paper 11x14 Box 2 Ply 2 59 Box Continuous Paper 9 ¾ X 11 ¾ 4 60 Pcs Correction Pen 22 61 Pcs Correction Tape 97 62 Pcs Correction Fluid (brush Type) 63 Pcs Cutter Heavy Duty 3 64 Pcs Desk Organizer 10 65 Pcs Document Tray 2 Tiers 8 66 Pcs Document Tray 3 Tiers 8 67 Pcs Documents Storage Box (large) 10 68 Pcs Duct Tape 15 69 Pcs Dust Pan 15 70 Pack Electrical Tape (big) 24 71 Pcs Engineering Field Book 10 72 Bottle Epson Black T001 15 73 Bottle Epson Cyan T001 12 74 Bottle Epson Magenta T001 12 75 Bottle Epson Yellow T001 12 76 Bottle Epson Black T003 89 77 Bottle Epson Cyan T003 51 78 Bottle Epson Magenta T003 53 79 Bottle Epson Yellow T003 65 80 Bottle Epson Black 664 16 81 Bottle Epson Cyan 664 8 82 Bottle Epson Yellow 664 10 83 Bottle Epson Magenta 664 10 84 Bottle Epson Black 008 2 85 Bottle Epson Cyan 008 2 86 Bottle Epson Yellow 008 2 87 Pcs Envelope Brown Long 113 88 Pcs Envelope Brown Short 146 89 Pcs Envelope Orange 15 90 Pcs Envelope Transparent 15 91 Pcs Envelope White Mailing (long) 984 92 Pcs Expanded Envelope Long 167 93 Pcs Envelope With Handle And Lock Long Plastic 6 94 Pcs External Drive (ssd) 1tb 8 95 Boxes Face Mask 3 96 Pcs Feather Duster 7 97 Pcs Flourescent Tube Light Bulb 3 98 Pcs Brown Folder (long) 307 99 Pcs Brown Folder ( Short) 164 100 Pcs White Folder (long) 455 101 Pcs White Folder (short) 202 102 Pcs Expanded (long) 30 103 Dozen Fabric Conditioner (sachet) 70 104 Pcs Garbage Bin/trash Can 11 105 Packs Garbage Bag (m) 27 106 Packs Garbage Bag (xl) 38 107 Pcs Glue All Purpose 32 108 Pcs Highlighter Pen Blue 9 109 Pcs Highlighter Pen Orange 12 110 Pcs Highlighter Pen Pink 16 111 Pcs Highlighter Pen Violet 5 112 Pcs Highlighter Pen Yellow-green 47 113 Bottle Hp Ink Cartridge 690 (tricolor) 1 114 Bottle Hp Ink Cartridge 680 (black) 1 115 Ream Index Card (5x8) 25 116 Pcs Insecticide 2 117 Rolls Laminating Film 1 118 Pack Laminating Sheets (a4 Size) 3 119 Pcs Led Bulb 10 Watts 39 120 Pcs Led Bulb 15 Watts 17 121 Pcs Long Plastic Envelope With Handle And Lock 15 122 Gal Disinfectant 4 123 Bottle Disinfectant Spray 510g 9 124 Pcs Manila Paper 76 125 Pcs Micro Sd Card 128gb 3 126 Pcs Notebook (regular) 45 127 Ream Paper Payroll A3 2 128 Box Paper Clips (big) 30 129 Box Paper Clips (small) 59 130 Box Plastic Paper Fastener (long) 10 131 Box Plastic Paper Fastener (short) 22 132 Pcs Paper Cutter (b3) 1 133 Pcs Plastic Ring Comb 3 134 Ream Pvc Cover A4 5 135 Ream Pvc Cover Long 3 136 Ream Pvc Cover Short 1 137 Pcs Pen Holder 7 138 Pcs Pencil Lead With Eraser 125 139 Pcs Permanent Marker Fine (black) 61 140 Pcs Permanent Marker Fine (blue) 20 141 Pcs Permanent Marker Fine (red) 4 142 Pcs Permanent Marker Broad (black) 38 143 Pcs Whiteboard Marker (black) 42 144 Pcs Whiteboard Marker (blue) 7 145 Pcs Permanent Marker Refill Ink 2 146 Pcs Whiteboard Marker Refill Ink 2 147 Packs Photo Paper Long 12 148 Packs Photo Paper A4 7 149 Packs Plastic Key Tags 20 150 Pcs Puncher 14 151 Box Push Pin 19 152 Pcs Rain Coat 27 153 Pcs Rain Boots 1 154 Pcs Record Book 200 Leaves 35 155 Pcs Record Book 300 Leaves 11 156 Pcs Record Book 500 Leaves Medium 33 157 Pcs Record Book 500 Leaves Wide 25 158 Box Rubber Bond (big) 5 159 Pcs Rugs 32 160 Set Ruler (transparent) 12pcs/set 11 161 Pack Scissors 8” 33 162 Pcs Scissors Big 6 163 Pcs Sign Pen (black) 178 164 Pcs Pencil Sharpener 9 165 Pcs Pencil Sharpener Mounted 11 166 Sachet Detergent Powder 48 167 Pcs Detergent Bar 33 168 Pcs Dishwashing Soap 7 169 Pcs Dishwashing Paste 40 170 Pcs Dishwashing Liquid 2 171 Pcs Soap Hand (bar) Big 25 172 Pcs Soap Hand (bar) Regular 4 173 Pcs Soap Hand (bar) Small 12 174 Bottle Hand Washing Liquid 18 175 Packs Special Paper A4 120 Gsm 48 176 Packs Special Paper Long 120 Gsm 48 177 Packs Special Paper A4 200 Gsm 20 178 Packs Special Paper Short 200 Gsm 10 179 Packs Special Paper Long 200 Gsm 33 180 Pcs Stamp Pad No. 2 10 181 Pcs Stamp Pad Ink (violet) 7 182 Pcs Stamp Pad Ink ( Black) 1 183 Pcs Stamp Pad Ink (blue) 5 184 Pcs Staedtler Eraser 2 185 Pcs Stamp (received) 3 186 Pcs Stapler With Remover 20 187 Box Staple Wire #35 38 188 Box Staple Wire #35 Copper 33 189 Box Staple Remover (pinch Claw) 23 190 Pcs Staple Gun Tacker 2 191 Pcs Staple Gun Tucker Wire 3 192 Packs Sticker Paper Long 100s 29 193 Packs Sticker Paper Long 100s 29 194 Packs Sticky Notes 3x3 31 195 Packs Sticky Notes 3x2 26 196 Pcs Sticky Notes 3x4 25 197 Pcs Scotch Tape 1 Inch 65 198 Pcs Scotch Tape 2 Inch 19 199 Pcs Masking Tape 24mm 32 200 Pcs Masking Tape 48mm 47 201 Pcs Double Sided Tape 1” 38 202 Pcs Packaging Tape 48mm 24 203 Rolls Steel (10 Mtrs) 2 204 Box Tissue Paper 66 205 Pcs Facial Tissue 13 206 Pcs Table Name Plates 11 207 Pack Tape Dispenser 7 208 Pcs Transparent Index Tab 2 209 Pcs Tornado Mop (360) 15 210 Pcs Usb Flash Drive (32gb) 5 211 Pcs Usb Flash Drive (16gb) 3 212 Pcs Whiteboard Eraser 3 213 Pcs Wifi Adapter 3 214 Pcs Window Glass Cleaner 10 215 Pcs Glass Cleaner Spray 3 216 Pcs Wireless Keyboard And Mouse 3 217 Pcs Yellow Paper 15 218 Pcs Long Expanded Plastic Envelope 12 219 Pcs Pail (big) 3 220 Pcs Dipper (big) 4 221 Pcs White Board 1 222 Pcs External Drive (ssd) 2tb 1 223 Pcs Ups 2 224 Pcs Computer Mouse Usb W/ Wire 1 225 Pcs Pen Organizer 2 226 Pcs Steel Grinding Disc 4” 4 227 Kl Cwn 3” 5 228 Kl Cwn 4” 5 229 Kl Tie Wire 6 230 Gal Enamel Paint (black) 2 231 Gal Red Lead 2 232 Pcs Paint Brush 2” 5 233 Pcs Cutting Disc 6 234 Set Welding Gloves 1 235 Box Welding Rod 6011 1 236 Set Safety Gloves 15 237 Pcs Mop 8 238 Unit Comb Binding Machine 1 239 Pcs Drum Kit Mb760/mb770 2 240 Pcs Cover Pan With Broom 1 241 Pcs Date Stamp Received 1

Details: Description A. Form Works And Accessories 1 40 2" X 2" 8" Coco Lumber Pcs 90.00 3,600.00 2 4 1/4" X 4" X8" Ord. Plywood Pcs 420.00 1,680.00 3 30 Bamboo Poles Pcs 120.00 3,600.00 4 5 Assorted Cwn Kgs 80.00 400.00 5 1 #16 Tie Wires Roll 2,000.00 2,000.00 B. Reinforced Concerete Works 6 12 Graded Gravel Cu.m 650.00 7,800.00 7 6 Fine Sand Cu.m 650.00 3,900.00 8 110 Portland Cement Bags 250.00 27,500.00 9 157 16mm Dia X 6m Rsb Pcs 360.00 56,520.00 10 65 12mm Dia X 6m Rsb Pcs 220.00 14,300.00 11 138 10mm Dia X 6m Rsb Pcs 180.00 24,840.00 12 5 "#16 Tie Wires (1.0mm X 3.0m X 1.00m Steel)" Kgs 100.00 500.00 13 9 Deck Pcs 2,000.00 18,000.00 C. Walls And Partitions 14 54 Portland Cement Bags 250.00 13,500.00 15 1100 4" X 8: X 16" Chb Pcs 15.00 16,500.00 16 5 Fine Sand Cu.m 650.00 3,250.00 17 68 10mm Dia X 6m Rsb Pcs 180.00 12,240.00 D. Steel And Transmitting Works 16 11 " 0.40mm Thk X 1.0m X 6.40m Pre-painted Long Span G.i Sheets " Pcs 1,130.00 12,430.00 17 12 "1.2mm X 50m X 100mm C. Purlins" Pcs 640.00 7,680.00 18 8 "6mm X 50mm X 150mm X 6m Tubular Pipe" Pcs 1,800.00 14,400.00 19 15 "12mm X 300mm X 2.40m Facia Board" Pcs 420.00 6,300.00 20 15 3/8" X 1"x1" X 6m L-bar Pcs 500.00 7,500.00 21 10 Welding Rod Kgs 150.00 1,500.00 22 3 Roof Sealant Lit 400.00 1,200.00 23 4 Tecks Screw Box 500.00 2,000.00 24 2 Blind Revits Box 400.00 800.00 25 1 Roof Sealant Lit 400.00 400.00 26 2 Metal Primer Gal 520.00 1,040.00 E. Doors And Glass Works 27 1 0.8 M X 2.1 M Wooden Panel Door W/ Jambs Unit 10,200.00 10,200.00 28 1 1.2m X 2.4m Analok Framed Sliding Window Set 7,800.00 7,800.00 29 2 0.60m X M0.60m Analokl Framed Awning Window Sets 1,200.00 2,400.00 30 2 0.7m X 2.1m Pvc Flush Door W/ Jambs Unit 2,700.00 5,400.00 31 3 Door Knob Set 600.00 1,800.00 32 2 1.2m X 2.4m Analok Framed Sliding Window Set 7,800.00 15,600.00 33 3 2"x3/12" Butterfly Hinges Pair 120.00 360.00 E. Electrical Works 34 8 4x4 Porcelain Receptacle Pcs 60.00 480.00 35 8 18w Led Capsule Bulb Pcs 175.00 1,400.00 36 5 2 Gang C.o W/ Plate Pcs 120.00 600.00 37 2 2 Gang Switch W/ Plate Pcs 80.00 160.00 38 3 2 Gang Switch W/ Plate Pcs 120.00 360.00 39 1 3.5mm2 Thhn Wire Box 4,500.00 4,500.00 40 1 2.0mm2 Thhn Wire Box 3,500.00 3,500.00 41 4 Junction Box Pcs 40.00 160.00 42 8 Utility Box Pcs 30.00 240.00 43 12 20mm Dia Electrical Conduit Pcs 110.00 1,320.00 44 5 Electrical Tape Roll 45.00 225.00 F. Plumbing Works 45 2 Water Closet W/ Sink Complete W/ Bathroom Accessories Set 12,000.00 24,000.00 46 8 13mm X 1.50m Pvc Pipe Length 90.00 720.00 47 2 Pvc Faucet Set 120.00 240.00 48 2 Stainless Floor Drain Pcs 120.00 240.00 49 2 Solvent Cement 200cc 120.00 240.00 50 4 50mm Dia Pvc Sanitary Pipe Pcs 270.00 1,080.00 51 4 50mm Dia Pvc Elbow Pcs 45.00 180.00 52 3 100mm Dia Pvc Sanitary Pipe Pcs 730.00 2,190.00 53 4 100mm Dia Pvc Elbow Pcs 90.00 360.00 54 2 Teflone Tape Roll 60.00 120.00 Amount: ₱351,255.00

Details: Description Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 1 - Support Service Area: Occupational And Behavioral Therapy Area) 1. The Deped Schools Division Of Eastern Samar, Through The General Appropriation Act Of 2024 Intends To Apply The Sum Of ₱ 288,650.25 Being The Abc To Payments Under The Contract For Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 1 - Support Service Area: Occupational And Behavioral Therapy Area) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Deped Schools Division Of Eastern Samar Now Invites Bids For The Above Procurement Project. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Prospective Bidders May Obtain Further Information From Deped Schools Division Office Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 500.00. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped Schools Division Of Eastern Samar Will Hold A Pre-bid Conference On January 13, 2025, 10:00am At The Bac Office, Deped Schools Division Of Eastern Samar Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before January 27, 2025, 9:00am Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 27, 2025, 10:00am At The Given Address Below Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Only The Proprietor Or Authorized Representative May Be Allowed To Purchase Bidding Documents. Letter Of Intent (loi), Special Power Of Attorney (spa) (for Authorized Representative), And Drl (document Request List From Philgeps) Are Required Upon Purchase. 11. The Deped Schools Division Of Eastern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Items, Specifications, Quantity Of Delivery, And Abc: Dresser, 8- Drawer 4' X 4' (3/4 Plyboard, Varnish Paint) 2 Sets Office Chair, Seat Height Adjustable W/ Caster Foam Padded Seat, Swivel Mechanism 1 Piece Sofa, Seating Capacity 2 Velvet: 100 % Polyester Frame Material Manufactured Wood Leg Material Manufactured Wood Seat Fill Material Foam Seat Construction Mdf Back Fill Material Foam Tufted Cushions Square Arm 1 Set Gang Chair, 5-seater, Base Material: Chrome Metal Leg Seat: Cold Rolled Steel Plate Back: Cold Rolled Steel Plate Color/s: Black, Silver Dimensions: 80 H X 296 W X 68 D Cm 2 Set Wooden Cubicle Partition, 4 Panel Divider (l 70.25 Inches X H70.25 Inches X T0.75 Inches) 4 Set Rubber Mat, Interlocking Rubber Mat 1 Meter X 1 Meter X 1" 20 Piece Pediatric Walker, Interlocking Rubber Mat 1 Meter X 1 Meter X 1" 1 Unit Platform Swings, Adjusts In Tilt Using Control Lines Attached To A Top Disc Features A Soft Padded Edge That Prevents Therapist Injury Can Be Used In A Range Of Positions, Including Sitting, Standing, Prone, And Supine Adaptation Provides Security For Clients Who Feel Uncomfortable Taking Their Feet Off The Floor Adaptation Makes It Possible To Introduce Infants And Smaller Children To The Platform Swing Dimensions: 31"l X 31"w X 60"h Working Load: 300 Lbs. Weight: 21 Lbs. 1 Unit Indoor Climbing Walls, Six Wood Panels Adjustable Anchor Kit (select Either Concrete Or Dry Wall Style) Wall Bracket (required For Adjustable Anchor Kit) Letter Climbing Handholds (sold In Sets Of Six Ea.) Number Climbing Handholds (sold In Sets Of Six Ea.) Character Climbing Handholds (sold In Sets Of Six Ea.) Plain Climbing Handholds (sold In Sets Of Ten Ea.) 1 Set Trampoline With Handrail, 40-inch Jumping Surface Area Handrail Adjusts From 28.5" To 36.5"h 16lbs. Holds Up To 300 Lbs Black 1 Set Tumble Barrels, Inside Diameter 12" Outside Diameter: 22" Weight Capacity: 250 Lbs Latex Free 1 Unit Wall Bars, Size: 190*70*10 Material: Beech Wood Or Poplar Wood Weight Bearing:150kgs Moq: 100pcs 1 Set Adl Boards, 6 Colors, 6 Different Dressing Skills Training. It Is A Good Way To Exercise Your Child's Finger Flexibility And Help The Kids Learn The Most Basic Dressing Skills. Is A Good Parent-child Toy.also A Good Preschool Education And Kindergarten Toys. A Quiet Skill Book Made Of Cardboard And Non-woven Fabric. Suitable For Children 2-7 Years Old. Package Dimensions: 11.73 X 9.76 X 2.28 Inches Item Weight: 1.28 Pounds 1 Set Abc = 288,650.25

Details: Description Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-157 Rebidding November 5, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Sixty (60) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 1 Unit Dropside Truck 3,390,000.00 General Specification: Gross Vehicle Mass Rating: 4,490kg Wheelbase: 3,405mm Rear Overhang: 1,955mm Overall Length: 6,430mm Approx. Vehicle Performance Horse Power Rating: 136 Ps @ 2,500rpm Maximum Torque: 390 N-m (39.8 Kg F.m) @ 1,400-2,400rpm Maximum Speed: 150 Km/h Maximum Engine Speed: 3,350rpm Gradeability: 45.5 % Engine: Diesel, Turbo Charged & Intercooled, 4-cycle, Vertical, 4-cylinder In-line, Overhead Valve, Water-cooled, Direct Injection Piston Displacement: 4.009l Emmission Level: Euro-iv Compliant Clutch: Dry, Single Plate With Damper Springs, Hydraulic Control Transmission: Manual 5-speed, With Overdrive Gear Ratio 1st 5.342 :1 - 5th 0.712 :1 Rear Axle: Full-floating, Single Reduction, Single-speed Hypoid Gearings Gear Ratio 4.333 :1 Service Brake: Dual-circuit Hydraulic, Vacuum Assist Parking Brake: Mechanical, Internal Expanding, Acting On Transmission Output Shaft Steering: Telescopic And Tilt Steering Column, Recirculating Ball With Integral Power Steering Fuel Tank : 100 Liters Wheel & Tires Wheels: 6-stud Disc Wheels Tires: 235/65r16c (tubeless) 5-number Including One Spare Tire Cab Aircon: With Airconditioning Unit Electrical Batteries: 12v X 2, Parallel Connection. 216 Kc {60 A-h} At 20-hour Rate Alternator: 12v – 130a Body Dimensions: (interior) Length: 4,575 Mm Width: 1,750 Mm Height: 400 Mm Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 1 Of 2 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-157 Rebidding November 5, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Sixty (60) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) Dropside Body Specifications Floor Joist: 3.0mm T Msp G-channel Flooring: 2.3 Mm T Ms Checkered Plate Side/rear Gates Panel: 1.2 Mm T G.i Bended Sheet Front Panel: 1.4 Mm T Ms Plate Front Post: 2.0 Mm T Ms Plate Body Anchorage: 16mm D S45c U-bolt Steel Runner: 3.0 Mm T Ms Plate Step Ramp: 2.3 Mm T Ms Checkered Plate Lower Skirt: 0.8 Mm T G.i. Sht. Bended Closed Section Side Lights: 4 Pcs. Led At Sides (2 Pcs. Lh/ 2 Pcs. Rh) Rubber Gate Stopper: Equipped Drop Frame: Rhs #16 1.5t X 40 X 50 Hinges: 3.0 Mm T G.i. Steel Gate Locks: Spring Latch Undercoat: Painted Black Tailgate Lifter: 750kgs Capacity Chassis Warranty: Three (3) Years, Unlimited Mileage. Body Warranty: One (1) Year Warranty Note: 1. Bidder Should Be Authorized Dealer/distributor Of The Brand Offered With Certification 2. Brand Offer Should Be In The Philippine Market For 25 Years 3. Inclusive Of Lto Registration And Tpl Insurance (3 Years) 4. Inclusive Of Seminar & Training For The Proper Usage And Maintenance Of Unit 5. Inclusive Of Tint, Matting And 2pcs. Ewd Please Indicate Brand Of Offer And Attach Complete Technical Brochures In The Eligibility And Technical Proposal Bidders Must Possess Valid Mayor's/business Permit With A Relevant Line Of Business In The Sale Of Vehicles For Use Of Gso Under Pr No. 4 Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry, Baguio City, January 10 , 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 2 Of 2

Details: Description Provisions: ◉deliver Within 30cds Liquidated Damages Shall Be Applied For Late Delivery. ◉description Of Items Indicated Below Are The Minimum Requirements Of The Water District But Suppliers May Offer Items With Better Specifications And Are Not Inferior To The Specified Below. ◉warranty Shall Be Six ( 6 ) Months For Supplies/materials; One ( 1 ) Year For Equipment/construction Works From Date Of Acceptance. ◉delivered Goods With Defects Shall Be Communicated To The Supplier In Writing And Replacements Must Be Made Within Seven (7) Calendar Days (cds) For Ordinary Office Supplies And Thirty (30) Cds For Made To Order Items. ◉price Validity Shall Be For A Period Of Thirty ( 30 ) Calendar Days & Must Include Vat, Shipping Cost And Other Fees. ◉quotations Are Final. Suppliers Are Advised To Check Their Pricing Carefully Before Sending The Same To The Water District. ◉payment Of Awarded Items To Supplier Shall Be For A Period Of 30 Calendar Days After Complete Delivery, Acceptance & Inspection. ◉ All Transactions Are Subject To Withholding Of Creditable Value Added Tax (vat) Per Revenue Regulations Res. 10-93. ◉awarding Of This Posting Shall Be Per Lowest Calculated Bid For Each Item Or Per Lot, Whichever The Pe Determines To Be More Advantageous. Orlando A. Aycardo (sgd) . Canvasser Item And Description Qty Unit Brand/model Offered Unit Price Total 1 Angle Valve 1/2", Std. 6 Pcs 2 0.30x0.30m Non-slip Gray Floor Tiles 65 Pc 3 0.30x0.60m Gray Polish Tiles 115 Pc 4 500x430x3mm Thk. Facial Mirror On Aluminum Framing Oval 1 Pc 5 560x500x3mm Thk. Facial Mirror Plain, Round 2 Pc 6 Floor Drain Streamer 2" 2 Pc 7 Lavatory (including Fittings And Accessories), White P-trap 1 Set 8 Ppr Ball Valve 1/2", Std. 4 Pc 9 Ppr Coupling 1/2", Std. 17 Pc 10 Ppr Cross Angle Valve 1/2", Std. 1 Pc 11 Ppr Elbow 1/2", Std. 45 Pc 12 Ppr Female Adaptor 1/2", Std. 13 Pc 13 Ppr Female Elbow 1/2", Std. 1 Pc 14 Ppr Male Elbow 1/2", Std. 4 Pc 15 Ppr Pipe 1/2", Std. 18 Pc 16 Ppr Tee 1/2", Std. 14 Pc 17 Ppr Union Patente 1/2", Std. 2 Pc 18 Pvc Sanitary Fittings Coupling 3" Orange 3 Pc 19 Pvc Sanitary Fittings Elbow 2"x45° Orange 4 Pc 20 Pvc Sanitary Fittings Elbow 2"x90° Orange 14 Pc 21 Pvc Sanitary Fittings Elbow 3"x90° Orange 10 Pc 22 Pvc Sanitary Fittings Elbow 4"x90° Orange 6 Pc 23 Pvc Sanitary Fittings Tee 4"x4" Orange 3 Pc 24 Pvc Sanitary Fittings Wye Reducer 4"x2" Orange 4 Pc 25 Sanitary Upvc Pipe 2"øx10' Orange 5 Pc 26 Sanitary Upvc Pipe 3"øx10' Orange 5 Pc 27 Sanitary Upvc Pipe 4"øx10' Orange 3 Pc 28 Sanitary Upvc P-trap 2" Orange 3 Pc 29 Sanitary Upvc Coupling 2" Orange 5 Pc 30 Stainless Steel Grab Bar 60cm 6 Pc 31 Stainless Steel Or Chrome Plated Faucet 2 Pc 32 Tile Adhesive 5 Bag 33 Tile Grout Gray 5 Bag 34 Tile Trim Gray 8 Pc 35 Water Closet With Bidet (including Fittings And Accessories) 2 Set 36 Pcv End Cap 4" 2 Pc 37 10mmø X 6m Reinf. Steel Bar (astm Grade 40) 322 Pc 38 12mmø X 6m Reinf. Steel Bar (astm Grade 40) 45 Pc 39 16mmø X 6m Reinf. Steel Bar (astm Grade 40) 16 Pc 40 40kg Portland Cement 115 Bag 41 Angle Bar 2x2x3/16, Std. 8 Pc 42 Chb 4" 650 Pc 43 Cutting Disc 4" 10 Pc 44 Cutting Disc 5" 25 Pc 45 G.i. Tubular Steel 2x2x6m 2 Pc 46 Gravel 3/4 8 Cu.m 47 Ordinary Plywood 1/4"x4'x8', Std. Thickness 4 Sheet 48 Phenolic Board 1/2"x4'x8' 4 Sheet 49 Sahara 10 Kg 50 Sand 16 Cu.m 51 Sand Paper #100 2 Pc 52 Steel Matting Blue 10 Pc 53 Tie Wire #16 2 Roll 54 Water Proofing 2 Gallon 55 Welding Rod E6013, 3.2mm Dia. X 350mm Long 10 Kg 56 Baby Roller 4" 6 Pc 57 Flat Latex White, Non-odor 1 Pail 58 Gloss Latex White 1 Pail 59 Paint Brush 2 2 Pc 60 Primer Zinc Gray 3 Gallon 61 Qde Green Top Coat 4 Gallon 62 Skim Coat (20kg) 4 Bag 63 Solvent Cement 1 Liter 64 Top Coat Orange 1 Gallon 65 Top Coat Smoke Gray 2 Gallon 66 Flower Pots Wall Hanging, White (4 Clips) 8" X 4.5" X 4" 500 Pc 67 Polyethylene Storage Tank (horizontal) Blue, Capacity 2000 Liters (528 Gallons), Height 123.9cm, Width 131cm, Length 164cm 1 Unit 68 1/2" Upvc Electrical Conduit Pipe, Orange 10 Pc 69 Electrical Tape Big 10 Pc 70 Receptacles 4 Pc 71 Switch 1 Gang 2 Pc 72 Switch 2 Gang 1 Pc 73 Utility Box 2x4 3 Pc 74 Junction Box 4"x4" 5 Pc 75 Wire, 2.0 Mm2 Thhn (black) 20 Mtr 76 Wire, 3.5 Mm2 Thhn 30 Mtr *to Avoid Problems During Acceptance, Please Indicate/attach Available Technical Specifications And/or Brochure.

Details: Sources Sought/request For Information Melting, Rolling And Milling Of Lead this Sources Sought Synopsis Is Not A Pre-solicitation Notice, Request For Proposal (rfp), Or An Invitation For Bid, But A Market Survey To Identify Potential Participants. This Notice Is Not To Be Construed As A Commitment By The Government To Award A Contract. The Government Will Not Reimburse Contractors For Any Costs Incurred Because Of Their Participation In This Survey. The Proposed North American Industry Classification System (naics) Code For This Acquisition Is 562920 – Materials Recovery Facilities, With A Small Business Standard Size Of $25m. The Purpose Of This Sources Sought Announcement Is To Assist The Department Of Energy In Conducting Market Research To Identify Sources Of Services That Meet Their Requirements, And In Accordance With Far Part 10, To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Qualified Business Participants Capable Of Providing All Services Described In This Synopsis. background the Department Of Energy (doe) Conducts A Variety Of Research And Operational Activities That Utilizes Lead As Radiation Shielding, Including Within The Office Of Science (sc) Which Funds Basic Research To Advance The Scientific Knowledge Needed To Provide New And Improved Energy Technologies; To Understand The Health And Environmental Implications Of Energy Production And Use; And To Maintain U.s. Leadership In Discovering The Fundamental Nature Of Energy And Matter. the Sc Organization Is Led By A Presidentially Nominated, Senate-confirmed Director And Two Senior Career Federal Deputy Directors: Science Programs, And Operations. The Organization And Functions Are Further Discussed At The Following Website: Http://science.energy.gov/about/organization. sc Comprises A Geographically Diverse Organization. Sc Has Two Locations In The Washington, d.c. Area (headquarters): One Location At Doe’s Forrestal Building In Washington, D.c. And One Location In Germantown, Maryland. Most Of The Sc Programs Staff Resides At These Two Locations. Field Operations Comprises The Consolidated Service Center (csc) And Ten Site Offices. The Csc Is A Virtual Organization Located In Lemont, Illinois, And Oak Ridge, Tennessee. The Ten Site Offices Are Collocated With Their Respective National Laboratories. sc Currently Has A Project That Requires Fabrication Of Shielding Panels Made Of Lead, Clad In A Stainless-steel Shell. To Accomplish This, Sc Has A Need For Professional Services To Accept About 210 Tons Of Excess Lead From Doe, Then Process And Fabricate The Lead Into Shielding Panels To Be Installed To The Inside Face Of Precast Walls To Improve Radiation Shielding Performance. scope the Doe Would Like To Consider The Fabrication Of New Lead Panels Derived From Excess Lead Accumulated Throughout The Department. The Scope Includes A Stock Of About 210 Tons Of Excess Lead In A Variety Of Configurations, Including Solid Shapes, Lead Shot, And Other Forms. Tasks Would Include Processing And Fabrication Of Excess Doe Lead, Such As Melting Lead Into Ingots, And Fabricating Of Lead Into Stainless Steel Cladding To Meet Specifications Provided By Doe. the Project Requires About 70 Lead Panels Between Two Inches And Four Inches In Thickness. The height Varies From Two Feet To Seven Feet, And The Width Varies From Two Feet To Ten Feet. One Side Of The Panel Shall Be Steel Encased. The Opposite Side Shall Be Painted, And Small Cutouts Are Required On This Side. The Panels Also Need Anchor Holes And Lifting Inserts. additionally, Doe Would Like To Understand Costs And Processes For Manufacturing Other Miscellaneous Items From Cast, Rolled Or Otherwise Formed Lead. Doe Would Also Like To Understand The Costs And Process Structure For Working With New Lead Versus Recycling Lead To Meet The Same Deliverable. the Structural Design And Anchorage Detailing For The New Lead Shielding Panels In This Project Is Based On The Current Asce -16, California Building Code (cbc), 2019 Edition, Part 10 (california Existing Building Code, University Of California Seismic Safety Policy, Geotechnical Data And Interpretation Report And Site-specific Seismic Hazard Analyses And Development Of Design Ground Motions Report). The Seismic Analysis And Retrofit Design Of The Existing Structure Have Been Performed In A Previous Task. The Design Considers The Combination Of Gravity And Seismic Loading Resisted By The Anchorage To The Precast Walls. Note: Although This Project Is Located In The State Of California, Future Projects May Be Located In Other States And Be Subject To That State’s Standards. request For Information (rfi) the Government Requests Responses From All Interested Businesses Who May Be Able To Meet All Or Part Of The Technical Requirements, Including Those Certified As A Small Business In The Suggested Naics Code Of 562920. submission Requirements: 1. Page Limit - Ten (10) 2. Page Size - 8 ½” X 11”; 12 Pt. Times New Roman Font 3. Do Not Include Promotional Materials 4. To Be Received No Later Than 30 Calendar Days After Posting. 5. Submissions Must Be E-mailed To Trevor.weeks@science.doe.gov & Dustin.epperson@science.doe.gov With A Subject Line Of “lead Melting, Rolling, And Milling Rfi ”. interested Sources That Have The Capability To Provide This Support Are Requested To Submit The Following: a Technical Capability Statement To Provide The Services Described To Include Company Name, Address, Point Of Contact, E-mail Address, Telephone, Uei, Tin, Cage Code, And Any “doing Business As Name” As Applicable. include With Your Technical Capabilities Statement The Answers To The Following Questions: 1. What Is Your Business Type, Size, And Socio-economic Status In Reference To The Projected Naics Code Of 562920? If The Naics Code Is Not Currently In Your Sam.gov Profile, What Do You Anticipate Your Business Size And Socio-economic Status Will Be Once The Naics Code Is Added To Your Sam.gov Profile? Is Naics Code 562920 Appropriate For This Project? 2. Based On Your Knowledge Of This Type Of Requirement, Do You Believe That The Use Of A Firm- Fixed Price Contract Type Is Appropriate? If Not, What Contract Type Is More Appropriate And Why? 3. Based On Your Experience And Knowledge Of This Type Of Requirement And The Size Of The Effort Described In The Scope Section Of This Rfi, Is There An Industry Standard For Costs? 4. What Is Your Experience Processing And Fabricating Lead? 5. Describe Your Experience In Both The Government And The Commercial Market. 6. Provide A Description Of Recent Contract/project Experience As The Prime Contractor For Work Performed Within The Last Five Years For Both The Company And Any Subcontractors, If Applicable, To Include The Following (please Limit To One Page Per Contract/project): • The Size (dollar Value), Duration, Scope, And Complexity Of The Contract/project. • The Type Of Contract (i.e., Fixed Price, Cost Reimbursement, Etc.); And • Identification Of A Contract Or Project Number And Point Of Contact And Contact Information (name, Address, And Phone) At The Agency Or Prime Contractor’s Organization. 7. Provide Documentation, If Any, Demonstrating All Stated Industry Credentials. 8. Do You Currently Have A Government-wide Contract Vehicle That Provides This Service (sewp Idiq, Government-wide Acquisition Contracts (gwac), Multi-agency Contracts, Other Indefinite Delivery Contracts (id/iq), Federal Supply Schedules (fss), Basic Ordering Agreements (boa), Blanket Purchase Agreements (bpa), Etc.? If Yes, Please Provide The Vehicle Type And Contract Number. Are All Services Required In This Synopsis Included In Your Government-wide Contract Vehicle? 9. What Suggestions, If Any, Do You Have For Meeting Doe’s Requirements (including Evaluation Criteria, Contract Line-item Structure, Contract Structure, Or Other Topics)? all Interested Parties Must Be Registered In The System For Award Management (sam) To Be Eligible For An Award Of Government Contracts. ==================================================================== any Proprietary Information Contained In Response To This Request Will Be Properly Protected From Unauthorized Disclosure And Will Not Be Used To Establish The Requirements For Any Future System Acquisition To Not Inadvertently Restrict Competition. Any Evaluation Conducted For Market Research Purposes Shall Not Apply In Any Way To The Evaluation Of The Proposal Submitted To A Solicitation If A Solicitation Is Issued.

Details: The Nevada Air National Guard, 152nd Mission Support Group Contracting Office 1776 National Guard Way Reno Nv 89502 Is Issuing This Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Potential Sources Having An Interest And Industry Technologies Available To Support/provide Professional Artchitect-engineering Services (title I) Necessary To Develop A New Design For The Construction Of The Fuel Cell Hangar At The Nevada Air National Guard Base, Reno, Nv. the Result Of This Market Research Will Contribute To Determining The Method Of Procurement, If A Requirement Materializes. Based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses (in Full Or In Part) Or Procured Through Full And Open Competition. Multiple Awards May Be Made. All Small Business Set-aside Categories Will Be Considered. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Submissions. disclaimer this Sources Sought Is For Informational Purposes Only. This Is Not A Request For Proposal (rfp) To Be Submitted. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Technical Description Is Strictly Voluntary. objectives Of The Sources Sought understand The Level Of Interest And Availability Of Potential Vendors That Could Provide The Requested Design Solution. identify Issues, Roadblocks, And Barriers To Successful Solution Implementations. obtain Vendor Feedback On If The Vendor Will Utilize Any Subcontractors Or Teaming Arrangements. identify If A Total Solution Can Be Provided Via Open Market Contractors. provision Of Other Benefits Of Leveraging A Turnkey Solution. comments Regarding Any Ambiguities Or Needed Clarifications Of The Draft Technical Specifications. obtain Vendor Feedback On Any Other Pre-existing Contracts That Might Meet This Need. program Background the Fuel Cell Hangar Was Designed In 1997 And Was Constructed In 1999 To Support C-130 Aircraft Maintenance Operations. Since 1997, The Authorized Square Footage (sf) For A C-130 Fuel Cell Hangar Has Increased Due To Safety Requirements, Maintenance Procedures, And Airframe Size. Per Current Ufc, The Buffer Zone Around The Aircraft Nose And Wingtip Is 15 Feet. Currently, The Clearanace At The Nose Is 9 Feet While The Clearance In Front Of The Engines Are 10 Feet To The Nearest Structure. The Fuel Cell Hangar Primarily Supports Two Aircraft Maintenance Functions, Maintenance Dock, And Corrosion Control. The Fuel Cell Maintenance Dock Currently Operates At 83% Of The Authorized Sf. To 1-1-691, Requires Aircraft Be Washed Every 180 Days And At Completion Of An Isochronal Inspection (iso). Aircraft Washing Is Crucial For Nevada’s Aircraft Due To The Fire-retardant Chemical That Is Utilized As Part Of The Modular Airborne Fire Fighting System (maffs). Insufficient Sf In The Maintenance Dock Doesn’t Allow For Ground Cleaning Equipment To Transition Around The Aircraft Without Placing The Main Hangar Door In The Open Position. During The Winter Months, The Open Hangar Door Allows For Freezing Rain And Snow To Deposit On The Maintenance Dock Floor Creating A Safety Hazard And An Extremely Cold Work Environment. Corrosion Control Operates At 55% Of The Authorized Sf. This Sf Shortfall Forces Equipment And Aircraft Parts Be Stored In The Paint And Media Blasting Preparation Area. Equipment And Parts Are Constantly Relocated Outside Of The Facility, Or Placed On The Maintenance Dock Floor To Allow Access To The Preparation Area. Additionally, The Primary Media Blasting Room Is Currently Inoperable Due To A Risk Assessment Code (rac) For Improper “dirty/clean” Transition Zones Per Ufc 4-211-02. All Media Blasting Is Currently Performed In Smaller Self-contained Blasting Cabinets. The Blasting Cabinets Only Accommodate Smaller Parts And Require Additional Operating Space For Parts Handling And Circulation. required Capabilities the Government Requires Designs For The Construction Of A New Fuel Cell/corrosion Control Facility Utilizing Conventional Design And Construction Methods To Accommodate The Mission Of The 152nd Aircraft Maintenance Group. Facilities Will Be Designed As Permanent Construction In Accordance With The Dod Unified Facilities Criteria (ufc) 1-200-01, General Building Requirements And Ufc 1-200-02, High Performance And Sustainable Building Requirements. Provide Reinforced Concrete Foundation And Floor Slab With Steel Framed Walls And Roof Structure. Include Fire Suppression, Hvac And Electrical Distribution. Exterior Work Includes Pavements, Utilities, Drainage, And Communication Support. Air Conditioning 12 Tons.the A-e Is Responsible For Determining What Disciplines And Skill Sets Are Required For Accomplishing The Work And Form A Team Accordingly. The A-e Will Need To Work Extensively To Ensure Understanding And Compliance With All Federal, State, And Local Codes, Criteria, And Permitting Requirements. The A-e Must Accomplish The Required Services And Furnish To The Government Reports And Other Data Together With Supporting Material Developed During The Period Of Performance As Set Forth Herein. The A-e Must Provide Services To The Government During Solicitation And Construction Of The Project As They Pertain To Correcting Ambiguities, Errors, Deficiencies, And Omissions In The Design. special Requirements any Resulting Contract Shall Be Compliant With The Specialty Metals Restriction Of The Berry Amendment (10 U.s.c. 2533a And 2533b) In Accordance With Dfars Clauses 252.225-7008 And 252.225-7009. eligibility the Applicable Naics Code For This Requirement Is 541330 With A Small Business Size Standard Of $25.5m. Large And Small Businesses Interest Is Being Requested. The Product Service Code (psc) Is C211. submission Details interested Businesses Should Submit A Brief Capabilities Statement Package (no More Than Ten 8.5 X 11 Inch Pages, Font No Smaller Than 10 Point) Demonstrating Ability To Provide The Products/systems Listed In This Technical Description. Documentation Should Be In Bullet Format. No Phone Or Email Solicitations With Regards To The Status Of The Rfp Will Be Accepted Prior To Its Release. your Response To This Sources Sought, Including Any Capabilities Statement, Shall Be Electronically Submitted To The Contracting Officer, Alex Norris, In Either Microsoft Word Or Portable Document Format (pdf), Via Email Alex.norris@us.af.mil No Later Than 1:00 P.m. Pdt On 14 January 2025 And Reference This Synopsis Number In Subject Line Of E-mail And On All Enclosed Documents. Information And Materials Submitted In Response To This Request Will Not Be Returned. Do Not Submit Classified Material. if Your Organization Has The Potential Capacity To Provide The Required Products/systems, Please Provide The Following Information: 1) Organization Name, Address, Primary Points Of Contact (pocs) And Their Email Address, Fax, Web Site Address, Telephone Number, And Type Of Ownership For The Organization; And 2) Tailored Capability Statements Addressing The Requirements Of This Notice, With Appropriate Documentation Supporting Claims Of Organizational And Staff Capability. If Significant Subcontracting Or Teaming Is Anticipated In Order To Deliver Technical Capability, Organizations Should Address The Administrative And Management Structure Of Such Arrangements. all Data Received In Response To This Sources Sought That Is Marked Or Designated As Corporate Or Proprietary Will Be Fully Protected From Any Release Outside The Government.

Details: Synopsis For Firm-fixed-price Contract – Architect-engineering (a-e) Services (full and Open) To Support The Design Of The Renovation Project Xtlf 21-1035 Add_repair Fire Station, f140 At Vance Afb, Oklahoma. this Announcement Is Not A Request For Proposal. Neither The Government Nor asrc Federal Field Services (affs) Will Pay Or Reimburse Any Costs Associated with Responding To This Request. The Government And Affs Is Under No obligation To Award A Contract As A Result Of This Announcement. 1. Contract Information this Requirement Is Being Procured In Accordance With The Brooks Act As Implemented In Far 36.6. Firms will Be Selected For Negotiation Based On Demonstrated Competence And Qualifications For The Required work. Refer To Section, “5. Selection Process”, For General Information On The A-e Selection Process. a-e Services Are Required For Site Investigation, Engineering Studies, Concept Design, Final Design, And minimal Construction Phase Services For The Subject Project. The Applicable Naics Code Is 5413, architectural, Engineering, And Related Services. This Announcement Is Open To All Businesses regardless Of Size. Affs Is Contemplating Awarding A Firm Fixed Price Contract. The Contract Is Anticipated to Be Awarded In March 2025 And Design Completed In Or Before March 2026. all Firms Will Be Required To Submit Sf330 For This Sources Sought Notice. Only A-e Teams Responding To this Solicitation And Found To Be Qualified Will Be Considered For The Award Of The Design Project. 2. Project Information this Project Is To Renovate The Combination Fire Station, F140. The Facility Is A One-story building And Was Constructed In 1968. The Facility Was Expanded With Building Additions In 1995 And 2004. The Current Size Of The Building Is 18,116 Gross Square Feet. The Size, Configuration, And condition Of This Facility Do Not Align With Requirements Of Dafman 32-1084 And Ufc 4-730-10. renovation Scope To Include Site, Building Envelope, Building Interiors, And Engineering Systems. site Scope Includes Grading And Drainage Design, Utility Relocation, Establishment Of An Aba accessible Route From Parking To The Building’s Main Entrance, Parking Lot Striping, And miscellaneous Sidewalk Repairs. the Project Will Require The Demolition Of A Portion Of The Facility Which Includes Office Areas. A building Addition Consisting Of A New Training Room, Designed To Meet Storm Shelter Criteria, administrative Offices And Public Toilet Rooms Will Be Constructed Where The Existing Office Area Has Been Demolished. building Envelope Scope Includes Replacement Of All Exterior Glazing And Glazing Systems, replacement Of All Roofing, Refinishing Of Exterior Walls, Modifications To Apparatus Bay Door openings, And Replacement Of All Exterior Doors And Frames. the Architectural Interior Scope Of Work Consists Of A Redesign Of Several Interior Spaces To enable The Enlargement Of The Firefighter Toilet/shower Rooms, The Relocation And Proper Sizing Of additional Support Offices And Functions, The Complete Removal And Replacement Of All Finishes Down to The Metal Studs In The Existing Dorm Rooms. In The Dorm Rooms The Demolition May Also Include metal Wall Framing If It Is Determined To Need Replacement. Finishes Such As Paint, Ceiling Tiles, and Flooring Will Be Replaced In Rooms Not Otherwise Modified For Changes In Function. renovation Scope To Achieve Aba Compliance For Spaces That Are Lightly Renovated Includes New signage, Adjustments To Door Hardware, And Relocation Of Controls, Light Switches, And Outlets As required. The Vestibules To The Day Room Are Not Aba Compliant And Will Be Demolished And reconstructed As A Part Of This Project. structural Scope Consists Of The Engineering Design Required To Support The New Building Addition, the Modifications Necessary To Increase The Size Of The Apparatus Bay Openings, Modifications To load Bearing Walls Where New Openings Are Required, And General Modifications Where Required To incorporate The Work Of Other Engineering Disciplines, And/or Because Of An Observed Deficiency, Or code Or Ufc Related Deficiency. renovations To The Existing Fire Protection Systems Includes Adjusting The Existing Fire Sprinkler system As Required To Accommodate Both Floor Plan And Ceiling Changes. Additionally, This Project will Upgrade The Fire Alarm System To Include An Emergency Voice Communication System, A Gas detection System, Provide A New Fire Alarm Interface To Building Life Safety Systems Including Fire sprinkler Monitoring, Provide Low Temperature Sensors In The Apparatus Bays, An Hvac Interface, in-building Mass Notification System, And An Automatic Fire Sprinkler System Throughout The building. The Fire Alarm Control Unit (facu) Will Be Relocated To The New Primary Building entrance. plumbing Scope To Include Engineering Design To Support Replacement Of The Existing Domestic Water hot Water Heater, Replacement Of All Existing Plumbing Fixtures And Installation Of New Connections where Required By Changes To The Floor Plan. Additionally, All Domestic Water Piping To Be Replaced back To The Point Of The Incoming Service. hvac Scope Includes Engineering Design To Support Completely New Systems Throughout The Facility. all Existing Below Grade Ductwork Will Be Abandoned And Sealed. A New Building Automation System will Be Installed For The Facility. electrical Engineering Scope Includes Design Necessary To Replace Multiple Existing Electrical panels, New Automatic Transfer Switches For Separating The Load From The Generator Into Emergency loads And Backup Loads. Lighting Will Be Replaced Throughout The Facility. environmental Scope Of Work Requires Preparation Of Criteria To Address The Abatement Of Acm In vibration Joints In The Mechanical Room And Encapsulated In The Fire Doors. project Will Require Sustainability Design And Compliance With Either The Gbci “guiding Principles assessment For Department Of Defense” Program Or The Gbi “department Of Defense Guiding Principles compliance For New Construction & Comprehensive Replacement” Program. sequencing Plans Will Be Required To Demonstrate How The Renovation Will Take Place Without impacting The Mission Of The Firefighters. 3. Response To Solicitation Submission Requirements: a-e Teams Will Be Selected In Accordance With Far Section 36.602-1. A-e Teams Must Submit A Sf330 package Of Qualifications For Review By Affs And Approved By Vance Afb Government Personnel. 4. Solicitation Submission Requirements the Sf330, Parts A Thru G Should Be Limited To 25 Numbered Pages (8.5”x11”) Of Easily Readable Text (size 11 Font), Graphics And Pictures. Part H May Also Be Included, Is Not Limited In Length, And is Not Required, But Is Encouraged. 5. Selection Process the Intent Of The Affs And A-e Team Arrangement Is To Facilitate The Timely, Transparent, And Efficient Teaming Between The A-e Teamand Affs To Meet The Needs Of Vance Afb. upon Receipt Of The Sf330 Packages, A Committee Comprised Of Affs Staff Architects, Engineers, And leadership Will Review The Package According To Far 36.602-2 Thru 36.602-4. submissions Will Be Evaluated Based On Stated Services In The Sf330. 1. Each Committee Member Will Independently Review The Sf330s And Evaluate The Suitability Of Each A-e Team For This Contract Based On The Submission Requirements Listed Above. 2. The Committee Will Meet, And By Consensus Agree To A Short-list Of The Most Qualified A-e Teams For Progessing To The Next Step For The Selection Process Based On The Provided Information In The Sf330. 3. The Most Qualified Teams Will Be Invited To An Aprpoximately 30 Minute Telephone/virtual Interview For The Purpose Of Answering Clarifying Questions Related To Their Sf 330 Submission. 4. Upon Conclusion Of The Interviews, The Committee Will Rank The Most Qualified Teams. The Rankings Will Be Shared With The 71st Iss/ce Flight Representatives. With Concurrence, Affs Local Purchase Will Provide The Highest Rank Team The Statement Of Work In Order To Begin Negotiating A Fee For The Project. upon Successful Conclusion Of The Fee Negotiations, The A-e Team Will Proceed With The Design process In Accordance With The Statement Of Work And At The Direction Of The Affs Managing architect Or Engineer. please See All Attached Forms: Please Submit All Qualifications To The Following Email Address: shari.lamunyon.ctr@us.af.mil please Note That All Attached Forms Should Be Filled Out And Sent Separately From The #4 Solicitation Submission Requirements .do Not Included These As Part Of The (limited To 25 Numbered Pages). all Qualifications Are Due By The 6th Of February 2025 11:00 Am (cst)