Painting Tenders

Details: The Project Consists Of Providing All Labor, Materials, And Equipment Necessary To Repair A Portion Of Runway 14/32 Pavement (see Location Below). the Project Consists Of Providing All Labor, Materials, And Equipment Necessary To Repair 2100 Lf Runway 14/32. a. Rotor Mill An Area 150 Lf X 2100 Lf To A Depth Of 2 Inches. b. Repave 150 Lf X 2100 Lf With 2 Inches Pg 76-22 Binder Faa Mix In Accordance With ufc 3-260-02. Groove New Pavement In In Accordance With Ufgs 32 01 18.71(grooving Of Airfield Paving). c. Crack Seal 4200 Lf (2100 Lf X 2) 25 Ft Wide Shoulder Areas d. Restripe All Demolished Stripes/markings With Retroreflective (type 1 Or Type Iii Beads) & White Paint. Markings Consists Of 11 - 120 Lf Long Arrows.

Details: 1.0 Description. The Marine Corps Systems Command (mcsc) Product Manager, Supply And Maintenance Support Systems (mss) Program Office Is Seeking Potential Sources To Provide Corrosion Repair Services Through A Firm Fixed Price Contract For Equipment Located At Okinawa, Japan. This Contract Would Provide Corrosion Repair Services For Marine Corps, Army, Navy, Navy Aviation Ground Support And Ground Support Equipment. The Purpose Of This Rfi Is To Identify Sources Capable Of Providing These Services As Described In The Following Paragraphs. 2.0 Minimum Requirements. The Contractor Shall Provide All Labor, Training, Management, Supervision, Tools, Equipment, Materials, And Supplies (except Those Items Specifically Noted As Government-furnished, Enclosure (1)) Necessary To Perform Corrosion Repair And Restoration Of Government Owned Vehicles, Equipment, And Components. Corrosion Repair Services Include, But Are Not Limited To: inspection disassembly cleaning body Repair surface Preparation coating Application registration Marking reassembly 3.0 Production Requirements. All Production Will Be Performed At The Government’s Site Corrosion Repair Facility (crf), Building 616, Camp Kinser, Okinawa, Japan. 3.1 The Contractor Shall Be Capable Of Repairing And Restoring A Monthly Production Objective Of ~70 Principal End Items (pei) With A Minimum Production Requirement Of Between 55-63 Peis Consisting Of Various Sizes And Corrosion Category Code (ccc) Condition. 3.2 Production Breakdown By Organization. Multiple Government Organizations Will Participate In This Contract; Production Shall Be Completed And Invoiced As Follows: - U.s. Marine Corps Equipment. ~50 Pei Per Month / 600 Per Year. - U.s. Army Pacific (usarpac) Equipment. ~6 Pei Per Month / 72 Per Year. - U.s. Navy Naval Construction Regiment (ncr) 30. ~4 Per Month / 48 Per Year. - U.s. Navy Aviation Intermediate Maintenance Detachment (aimd). ~ 2 Per Month / 24 Per Year - Other Military Services Operating Similar Equipment Outlined As Identified Above. 3.3 Repair Cycle Time (rct). Rct On The Day The Government Makes A Pei Available To The Contractor For Work. The Contractor Shall Be Capable Of Completing All Required Tasks In Thirty Days Or Less From The Equipment Induction Date. 4.0 Quality Assurance. The Contractor Shall Perform Quality Control Continuously Throughout The Corrosion Repair Process, And Develop And Maintain A Quality Control Program To Ensure Services Are Performed In Accordance With The Government’s Requirements And Accepted Practices. The Government Will Complete Quality Assurance (qa) Inspections After Each Stage Of Repair. 5.0 Technical References. All Service Of Equipment Shall Comply With The Following Technical References For The Respective Service’s Equipment: 5.1 U.s. Marine Corps Technical Manual (tm) 4750-15/1_, Painting, Coating, Underbody And Registration Marking For Marine Corps Combat And Tactical Equipment And Tm 4795-12/1, Operator And Organizational Maintenance Manual Corrosion Prevention And Control Procedures For Usmc Ground Combat Equipment. 5.2 U.s. Army Technical Publications. Tm 43-0139, Chemical Agent Resistant Coating (carc) Application And Quality Assurance On Army Ground Equipment And Tm 43-0242, Chemical Agent Resistant Coating Spot Painting For Army Ground Equipment. 5.3 U.s. Navy Technical Publications For Ground Equipment. 5.4 U.s. Navy Technical Publications. Navair 17-1-125, Maintenance Instructions Organizational And Intermediate Level, Support Equipment Cleaning Preservation And Corrosion Control. 5.5 Original Equipment Manufacturer (oem) Specifications, And Or Other Technical Guidance Provided By The Government. 6.0 Responses 6.1. Interested Parties Are Requested To Respond To This Rfi With A White Paper. 6.2. White Papers In Microsoft Word Or Office Compatible Format Are Due No Later Than 10 January 2025, 11:00 A.m. Est. Responses Are Limited To 5 Pages And Shall Be Submitted Via Email Only To The Contract Specialist, Kimberly.a.stone@usmc.mil And Deshawn.gaines@usmc.mil. Proprietary Information, If Any, Should Be Minimized And Must Be Clearly Marked. To Aid The Government, Please Segregate Proprietary Information. Please Be Advised That All Submissions Become Government Property And Will Not Be Returned. Only Government Employees Will Review The Responses. 6.3. Section 1 Of The White Paper Is Not Included In The Page Limitation And Shall Provide The following Administrative Information At A Minimum: 6.3.1. Name, Mailing Address, Overnight Delivery Address (if Different From Mailing Address), Phone Number, And Email Of Designated Point Of Contact, And Sam.gov Unique Entity Identification Number. 6.3.2. The Offeror’s Business Type (large Business, Small Business, Small, Disadvantaged Business, 8(a)-certified Small, Disadvantaged Business, Hubzone Small Business, Woman-owned Small business, Very Small Business, Veteran-owned Small Business, Service-disabled Veteran-owned small Business), Based Upon The North American Industry Classification System (naics) Code. please Refer To Federal Acquisition Regulation (far) Part 19 For Additional Detailed Information On Small Business Size Standards. The Far Is Available At Https://www.acquisition.gov/. 6.4 Naics Code For This Effort Is 811121, Automotive Body, Paint, And Interior Repair And Maintenance. 6.5 Product Service Code (psc) For This Effort Is J023, Maint/repair/rebuild Of Equipment-ground Effect Vehicles, Motor Vehicles, Trailers, And Cycles. 6.6 Section 2 Of The White Paper Shall Answer, At A Minimum, The Offeror’s Ability To Provide The Services Identified Within Paragraphs 2-4 Of This Rfi. 7.0 Industry Discussions. Mcsc Representatives May Or May Not Choose To Meet With Potential Offerors. Such Discussions Would Only Be Intended To Get Further Clarification Of Potential Capability To Meet The Requirements, Especially Any Development And Certification Risks. 8.0 Questions Regarding This Announcement Shall Be Submitted In Writing Via Email To The Contract Specialist, Kimberly.a.stone@usmc.mil And Deshawn.gaines@usmc.mil No Later Than 2:00 Pm Est, 13 December 2024. Verbal Questions Will Not Be Accepted. Questions Shall Not Contain Proprietary Or Classified Information. The Government Does Not Guarantee That Questions Received After 13 December 2024 Will Be Answered. 9.0 Summary. This Is A Request For Information (rfi) Only To Identify Sources That Offer Hardware Services Meeting The Requirements Listed In The Paragraphs Above.1.0. This Rfi Is Issued Solely For Information And Planning Purposes – It Does Not Constitute A Request For Proposal (rfp) Or A Promise To Issue An Rfp In The Future. The Information Provided In The Rfi Is Subject To Change And Is Not Binding On The Government. The Marine Corps Has Not Made A Commitment To Procure Any Of The Items And Or Services Discussed, And Release Of This Rfi Should Not Be Construed As Such A Commitment Or As Authorization To Incur Cost For Which Reimbursement Would Be Required Or Sought. Further, The Marine Corps Is Not At This Time Seeking Proposals And Will Not Accept Unsolicited Proposals. All Submissions Become Government Property And Will Not Be Returned. responders Are Advised That The U.s. Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Rfi; All Costs Associated With Responding To This Rfi Will Be Solely At The Interested Party’s Expense. Not Responding To This Rfi Does Not Preclude Participation In Any Future Rfp, If Any Is Issued. If A Solicitation Is Released, It Will Be Released On Sam.gov The Gsa Website. It Is The Responsibility Of The Potential Offerors To Monitor This Site For Additional Information Pertaining To This Requirement.

Details: Description Invitation To Bid Bid No. B-428-2024 1. The Provincial Government Of Negros Oriental, Through The Source Of Fund: (sp Res.# 376-2022 A0# 1, Series Of 2022 20% Df, Cy 2022/ Res.#1109-2023 Ao # 27, Series Of 2023 20% Df Cy 2023/ Responsibility Center:1918-004(22)/1918-013(23), Intends To Apply The Sum Of Twelve Million Seven Hundred Forty Thousand Pesos (php 12,740,000.00) Being The Approved Budget For The Contract (abc). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Province Of Negros Oriental Now Invites Bids For The Requirement One (1) Lot ,2 Infrastructure Projects, Viz: 1 To Hire Contractor To Provide Materials, Labor And Equipment For The "additional Appropriation For The Construction Of Multipurpose Building, La-playa Poblacion, Vallehermoso, Negros Oriental” P2,940,000.00 2 To Hire Contractor To Provide Materials, Labor And Equipment For The “improvement Of La-playa Multi-purpose Building, At Poblacion, Vallehermoso, Negros Oriental” P9,800,000.00 Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00am To 5:00pm (monday To Friday). Wilma D. Padilla Head, Bac Secretariat Bac Secretariat Office, Ground Floor, Convention Hotel, Capitol Area, Dumaguete City Telephone Number : (035) 225-4835, Local 475 Or 475 / Telefax Number Of Bac Secretariat: (035) 226-3804 Email Address Of Bac Secretariat: Bac-secretariat@negor.gov.ph / Bac.secretariat.neg.or@gmail.com 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 13, 2024 To January 7, 2025 Up To 1:00 In The Afternoon From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twelve Thousand Pesos (php 12,000.00). 6. The Bids And Awards Committee Will Hold A Pre-bid Conference On December 23, 2024 At 2:00 In The Afternoon At The Bac Conference Room, Ground Floor, Convention Hotel, Capitol Area, Dumaguete City And/or Through Video Conferencing Or Webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 7, 2025 At 1:00 In The Afternoon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 At 1:30 In The Afternoon, Bac Conference Room, Ground Floor, Convention Hotel, Capitol Area, Dumaguete City At The Given Address Below. The Attendance Of The Prospective Bidders Or His/her Duly Representative Is Highly Encouraged. 10. Submitted Documents Without Proper Tabbing For All Copies (3 Envelopes) With Name Of The Document (not Letters Or Numbers) And Not Book Bounded (soft/hard) Is Automatically Disqualified. 11. All Interested Bidders Are Required To Submit An Affidavit Of Site Inspection Certified By The Provincial Engineer Before They Are Allowed To Get The Bidding Documents From The Bac Secretariat 12. The Bac Of The Province Of Negros Oriental Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Andre M. Reyes Provincial Engineer’s Office Capitol Area, Dumaguete City Tel. No.: (035) 226-1982; Facsimile No.: (035) 226-1982 Email : Peonegor@yahoo.com.ph Arthur Fran P. Tolcidas Bac Chairperson One (1) Lot, 2 Infrastructure Projects, Viz: To Hire Contractor To Provide Materials, Labor And Equipment For The “additional Appropriation For The Construction Of Multi-purpose Building, La-playa Poblacion, Vallehermoso, Negros Oriental” Which Includes The Following Scope Of Work: Item No. Item Of Work Quantity Unit I. Mobilization/demobilization 1.00 Lumpsum Ii. Temporary Facility 1.0 Lumpsum Iii. Signages 1.00 Lumpsum Iv. Occupational Safety 1.00 Lumpsum V. Automatic Fire Sprinkler Roughing-ins 1.00 Lumpsum Vi. Ceiling Works 218.00 Sq.m. Vii. Tile Works 312.0 Sq.m. Viii. Painting Works 747.00 Sq.m. Ix. Electrical Works 1.00 Lumpsum X. Plumbing Works 1.00 Lumpsum Contract Duration: 90 Calendar Days Abc:p2,940,000.00 To Hire Contractor To Provide Materials, Labor, And Equipment For The “improvement Of La-playa Multi-purpose Building, At Poblacion, Vallehermoso, Negros Oriental” Which Includes The Following Scope Of Work: Item No. Item Of Work Quantity Unit I. Mobilization/demobilization 1.00 Lumpsum Ii. Signages 1.00 Lumpsum Iii. Occupational Safety 1.00 Lumpsum Iv. Demolition & Removal Works 1.00 Lumpsum V. Water Proofing Works 465.00 Sq.m. Vi. Excavation & Earth Fill Works 35.00 Cu.m. Vii. Concrete & Structural Works 84.00 Cu.m. Viii. Steel Works 16,865.15 Kgs. Ix. Carpentry Works 916.00 Bd.ft. X. Masonry Works 1,500.00 Sq.m. Xi. Painting Works 125.00 Sq.m. Xii. Roofing Works 130.00 Ln.m. Xiii. Plumbing Works 1.00 Lumpsum Xiv. Electrical Works 1.00 Lumpsum Xv. Door & Windows 1.00 Lumpsum Contract Duration: 170 Calendar Days Abc:p9,800,000.00 Total Abc:p12,740,000.00

Description: Sources Sought Response Form ellsworth Afb B-21 Alert Facility sources Sought Notice #w9128f25sm016 anticipated Solicitation #tbd purpose: By Way Of This Sources Sought Notice, The Usace-omaha District Intends To Determine The Extent Of Capable Small Business Or Other Than Small Business Firms That Are Engaged In Providing The Requirement Described Hereunder. The Responses To This Notice Will Be Used For Planning Purposes For Upcoming Procurements. Therefore, This Notice Does Not Constitute A Request For Proposal (rfp), Quotation Or Bid; It Does Not Guarantee The Future Issue Of An Rfq/rfp/ifb; Nor Does It Commit The Government To Contract For Any Supply, Service, Or Construction. There Is No Solicitation Currently Available. further, This Agency Will Not Accept Unsolicited Proposals. Respondents Are Advised That This Agency Will Not Pay For Any Information Or Administrative Cost Incurred In Response To This Notice. All Costs Associated With Responding To This Notice Will Be Solely At The Responding Party's Expense. At This Time, Proprietary Information Is Not Being Requested, And Respondents Shall Refrain From Providing Proprietary Information In Response To This Sources Sought Notice. project Description: this Upcoming Solicitation Will Be Executed Using A Design-bid-build (dbb) Project Delivery Method, Which Will Require The Contractor To Provide The Government With A Complete Facility And Warranty Based On The Request For Proposal (rfp). this Project Will Provide A 22,000 Sq Ft, Single-story Lodging & Readiness Facility For B-21 Air Crews On Alert Status, As Well As An Aerospace Ground Equipment Warm Storage Facility To Support The Alert Apron Aircraft. This Project Is Located Directly Adjacent To And Required To Coordinate With A Variety Of Other B-21 Construction Projects. construction Includes Demolition Of Existing Facility And Construction Of New Drilled Pier Concrete Foundation, Steel Frame Structure, Masonry Walls, Standing Seam Metal Roof, Utilities, Painting & Surface Prep. Special Foundation Due To Local Soils. Utilities Include Domestic & Fire Protection Water, Electrical, Sewer, Gas & Stormwater Drainage. Site Improvements Include Earthwork Landscaping & Exterior Lighting. Pavements Include Parking, Sidewalks & Access Drives. facilities Will Be Designed As Permanent Construction In Accordance With The Dod Unified Facilities Criteria (ufc) 1-200-01, General Building Requirements And Ufc 1-200-02, High Performance And Sustainable Building Requirements. Each Facility Must Be Compatible With Applicable Dod, Air Force, Aircraft, And Base Design Standards. In Addition, Sustainable (green) Construction Materials And Techniques Shall Be Used Where Cost Effective And/or Where Specified. This Project Will Comply With Dod Antiterrorism/force Protection Requirements Per Unified Facilities Criteria. special Construction And Functional Requirements: The Project Will Be Constructed On / Near The Existing Alert Apron At Eafb. As Such, The Project Will Be Constructed Adjacent To – And May Be Required To Integrate With Active Airfield Operations. It Will Also Be Constructed Adjacent To Other Active B-21 Facility Construction Sites. Demolition Of Existing Facilities, Utilities, And Infrastructure – To Include Hazardous Materials Contaminated Apron And Soils May Be Required. small Businesses Are Reminded Under Far 52.219-14© (1), Limitations On Subcontracting Services. At Least 50 Percent Of The Cost Of Contract Performance Incurred For Personnel Shall Be Expended For Employees Of The Concern. Prior Government Contract Work Is Not Required For Submitting A Response To This Sources Sought Synopsis. (for Construction): Project Period Of Performance: 800 Calendar Days From Construction Ntp. responses: Please Respond To All Information Requested In This Notice Not Later Than (2:00 Pm) 28 Jan 2025). Please Include The Sources Sought Notice Identification Number In The Subject Line Of The Email Submission With Attention To: James.r.willett@usace.army.mil And Cc Brittany.c.gull@usace.army.mil. required Information To Be Submitted In Response To This Notice: company Name, Address, Phone Number, Point Of Contract, Email, Web Address: cage Code And Unique Entity Identifier (uei): north American Industry Classification System Code (naics): state Whether Your Firm Is Classified By The Small Business Administration As Any Of The Following: small Business small Disadvantaged Business service-disabled Veteran Owned Small Business (sdvosb) section 8(a) women Owned Small Business (wosb) hubzone historically Black Colleges And Universities/minority Institutions none Of The Above is Your Company Currently Registered In System For Award Management (sam)? has Your Company Performed Work For The Federal Government Under A Different Name Or Uei/duns #, Or As A Member Of A Joint Venture (jv)? If Yes, Provide An Explanation: capabilities And Submission Requirements: submission Details: all Interested, Capable, Qualified, And Responsive Contractors Under Naics Code 236220 Are Encouraged To Reply To This Request. Interested Prime Contractors Only Should Submit A Narrative Demonstrating Their Experience In Construction Projects Of Similar Nature As Described In The Project Description. Responses Are Requested Only From: Potential Prime Construction Contractors With Company Bonding Capability (single Job) Of At Least $50m. Narratives Shall Be No Longer Than 12 Pages. Email Responses Are Required. please Include The Following Information In Your Response/narrative: •company Name, Address, And Point Of Contact, With Phone Number And Email Address •cage Code And Duns/eid Number •business Size To Include Any Official Teaming Arrangements As A Partnership Or Joint Venture •details Of Similar Projects And State Whether You Were The Prime Or Subcontractor •start And End Dates Of Construction Work •project References (including Owner With Phone Number And Email Address) •project Cost, Term, And Complexity Of Job •information On Your Bonding Capability - Specifically Identify Capacity Of Performance And Payment Bonds in Accordance With Dfars 236.204, The Magnitude Of This Project Is Expected To Range Between $25m And $100m. details On Similar Projects With Scope And Complexity Should Identify Experience With The Following Within The Past 10 Years: •construction Of Similar Clear-span Type Covered Storage Or Maintenance Facility (large Pre-engineered Metal Building Systems, Large Vehicle Storage, Large Bay Facility, Etc.) •construction Of Airfield Paving In Compliance With Ufc 3-260-02 Or Associated Unified Federal Guide Specifications. •construction Of Facilities To The Afi 16-1404 Or Equivalent Standards. •construction Of Facilities Designed To Resist Vibroacoustic Impacts Associated With Aircraft (or Other) Engine Runup And Taxiing. •construction Of Facilities On A Dod Military Installation. •construction Of Facilities On An Active Airfield Flightline. •construction Of Facilities With Shared Access, Laydown, And Limits Of Work To Adjacent Projects Awarded Under Separate Contract. responses Will Be Shared With Government Personnel And The Project Management Team On A Need-to-know Basis, But Otherwise Will Be Held In Strict Confidence. comments: provide Comments Or Identify Any Concerns Your Company Has Regarding The Planned Solicitation. Note That The Government Will Not Be Responding To Inquiries About The Proposed Solicitation At This Time. Your Responses And Comments Will Be Used By Government Personnel To Assess The Viability And Scope Of The Proposed Solicitation And Will Be Kept In Strictest Confidence. Telephone Inquiries Will Not Be Accepted. estimated Construction Contract Award Will Be Second Quarter Of Fiscal Year 2026 (fy26).

Details: Description Invitation To Bid For Establishment Of Slope Protection And Guardrail At Magsiko Peak, Atotes The Municipality Of Bindoy, Through The Mun. Supplemental Budget Cy 2024 20% Df Intends To Apply The Sum Of One Million Twenty-seven Thousand Five Hundred Thirty & 00/100 Pesos (p 1,027,530.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Establishment Of Slope Protection And Guardrail At Magsiko Peak, Atotes, Bindoy, Negros Oriental. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Municipality Of Bindoy Through Its Bids And Awards Committee (bac), Now Invites Bids From Eligible Bidders To Enter Into Contract Based On Award For The Purchase Of Construction Materials On Dec. 26, 2024 - Jan. 20, 2025. Stock No. Items/description Qty Unit 1 Portland Cement 710 Bags 2 Sand 61 Cu.m.m 3 Fine Gravel 11 Cu.m. 4 Boulders 250 Cu.m 5 Flat Stone 40 Cu.m 6 Fill Materials (mountain Quarry) 80 Cu.m 7 G.i. Tie Wire # 16 25 Kg 8 16mm Dia.x 6.0m Rebars 65 Lgth 9 12mm Dia.x 6.0m Rebars 230 Lgth 10 10mm Dia.x 6.0m Rebars 160 Lgth 11 Hacksaw Blade (good Quality) 40 Pcs 12 Wire Screen 15 Rolls 13 Paint Brush 2” 8 Pcs 14 Paint Brush 3” 10 Pcs 15 Latex Paint (white) 10 Gals 16 Paint (tinting Color) 8 Can 17 Cutting Disc 25 Pcs 18 2”x2”x12’ Coco Lumber (50 Pcs) 200 Bd.ft 19 2”x3”x12’ Coco Lumber (50 Pcs) 300 Bd.ft 20 2”x4”x12’ Coco Lumber (50 Pcs) 400 Bd.ft 21 1/2” Marine Plywood 12 Shts 22 4” Cw Nails 20 Kg 23 3” Cw Nails 15 Kg 24 1-1/2” Cw Nails 5 Kg 25 Nylon 5 Rolls Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On Dec. 26, 2024 - Jan. 20, 2025 From The Bac Secretariat Upon Payment Of The Applicable Fee For The Bidding Documents, Of Five Thousand Pesos Only (p 5,000.00). The Bids And Awards Committee Will Hold A Pre-bid Conference On January 06, 2025 At 02:00 Pm, At Mpdc Office, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before Dec. 26, 2024 - Jan. 20, 2025 At 1:30pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On January 20, 2025 At 2:00pm At The Office Of The Municipal Planning And Development Officer. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. The Municipality Of Bindoy Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Roberto L. Amaro Bac Chairman Office Of The Municipal Planning And Development Coordinator Poblacion, Bindoy, Negros Oriental Mobile Contact Nos. 09274958041

Details: Description 469.00 Bags Portland Cement T-1 (40 Kgs) 12.00 Pcs 1/4x4x8 Ord. Plywood 15.00 Kls Cwnails 1" 20.00 Kls Cwnails 2" 55.00 Kls Cwnail 2-1/2" 95.00 Kls Cwnails 4" 124.00 Pcs 12 Mm.dia.x6.0m. Def.steel Bars 445.00 Pcs 10 Mm.dia.x6.0m. Def.steel Bars 30.00 Kls Tie Wire (#16) 4.00 Pcs Hacksaw Blade 120.00 Pcs 8x8 Ceramic Unglazed Tiles 460.00 Pcs 8x8 Ceramic Glazed Tiles 10.00 Bags Tile Grout 15.00 Length Tile Frame 20.00 Kls Cwnails 3" 70.00 Pcs 1/4"thk.x4'x8' Marine Plywood 4.00 Sets 1.0x2.10m Hard Panel Door (tugas Or Narra) Installed 2.00 Sets 0.80 X 2.10m Flush Type Door(narra Or Tugas Framing)installed 18.00 Pcs 3-1/2"x3-1/2" Loose Pin Hinges (quality Brand) 6.00 Pcs Door Knob (quality Brand) 14.00 Sets 0.60m X 15 Blades Jalousie Glass With Aluminum Frame (installed) 2.00 Sets 0.60m X 5 Blades Jalousie Glass With Alum.frame (installed) 12.00 Pcs 25 Mm X 6.0m Flat Bar 54.00 Pcs 10mm Square Bar 81.00 Sheets Corrogated G.i. 0.40mmx10' 27.00 Sheets Corrogated G.i. 0.40mm Thkx 8' 24.00 Kls Umbrella Nails 4.00 Quarts Roof Sealant 10.00 Pcs Fabricated Ridge Roll 12.00 Pcs Flashing Gutter 100.00 Pcs Blind Rivets 2.00 Sets Flush Bowl (pail Type) 2.00 Sets Lavatory Wall Hung Type W/ Complete Accessories 2.00 Pcs Towel Holder 2.00 Pcs Toilet Paper Holder 2.00 Pcs Soap Holder 2.00 Sets 4x4 Floor Strainer Steel 2.00 Pcs 4"dia.x3.0m. Pvc Pipe 2.00 Sets P-trap 2"dia. Pvc 2.00 Pcs 2"dia.x3.0m. Pvc Pipe 6.00 Pcs 4"dia. Pvc Elbow (90* Bend) 2.00 Pcs 4"dia. Pvc Tee 4.00 Pcs 4"dia. Clean Out Plug 2.00 Pcs 4"dia.x2"dia. Reducer Tee 3.00 Pcs 2"dia.x3.0m. Pvc Pipe (vtr) 3.00 Pcs 2"dia. Pvc Coupling 4.00 Pints Pvc Solvent 12.00 Length Pvcpipe 1/2"x6.0m. Sch.40 6.00 Pcs 1/2" Dia. Pvc. Coupling Sch.40 6.00 Pcs 1/2" Dia Pvc Tee Sch 40 6.00 Pcs 1/2" Dia Pvc Elbow Sch.40 2.00 Sets Faucet (1/2") Brass ( Us Brand) 2.00 Pcs 1/2" Gate Valve 2.00 Sets Panel Board (4 Branches) 2.00 Sets Circuit Breaker (60a, 20a, 15a) 2.00 Boxes #14 Thw Wire (stranded) 2.00 Boxes #12 Thw Wire (stranded) 30.00 Mtrs #10 Thw Wire 20.00 Pcs Pvc Junction Box 14.00 Pcs Pvc Utility Box 8.00 Pcs Flash Type Convenience Outlet (2-gang) 4.00 Pcs Thumbler Switch (s2) 2.00 Pcs Thumbler Switch (s1) 8.00 Sets Flourescent Assembly (40w) (branded) 6.00 Pcs Bulb 50 W 10.00 Pcs Pvc Receptacle 12.00 Pcs Female Plug Screw Type 4.00 Pcs 3/4"dia.x3.0m. Pvc Pipe 2.00 Rolls 1/2" Dia. Flexible Hose 2.00 Pcs 3/4"dia. Pvc Entrance Cap 60.00 Pcs 1/2" Wood Screw 20.00 Pcs 3/4"dia. C-clamp 4.00 Rolls Electrical Tape (big) 60.00 Units Chair Wooden 1.00 Units Table Wooden 1.00 Units Filing Cabinet 4.00 Gals Galva Wash 4.00 Gals Penetrating Sealer 7.00 Gals Roof Paint (baguio Green) 10.00 Pints Raw Shienna Tinting Color Latex 2.00 Gals Latex Gloss (choco Brown) 2.00 Gals Roof Paint (white) 1.00 Quarts Roof Paint (red) 1.00 Quarts Roof Paint (green) 1.00 Quarts Roof Paint (blue) 2.00 Enamel Gloss (choco Brown) 10.00 Gals Flat Wall Latex White 10.00 Gals Latex Gloss White 8.00 Gals Flatwall Enamel White 8.00 Gals Gloss Enamel White 6.00 Gals Paint Thinner 60.00 Pcs Sand Paper #250 7.00 Gals Concrete Putty 4.00 Gals Wooden Putty

Description: CATEGORY: Chain wrench pipe 650mm , Chest Tool , Chisal firmer 26 mm , Cutter wire 175 mm , Cutter glass diamond complete , Drill Twist Mts , Drill Twist PSJ , File contact point , Files flat second cut 105mm , Files flat second cut 250mm , Files half round bastard 200 mm , Files half round bastard 300 mm , Files half round dead smooth 150 mm , Files half round second cut 100mm , Files half second cut 250 mm , Files half second cut 350 mm , Files hand smooth 250 mm , Files three square or triangular bastard , Files three square of triangular bastard , Files three square or triangular smooth , Files three square of triangular smooth , Files three square second cut , Files TPR saw regular second cut , Hammer tinmana round and square , Iron soldering elect , M seal , Mask dust , Planes jack 425 mm complete , Planes jack iron 56 mm single cut , Pliers eyelect closing set with three PA , Pliers parallel jaw 165 mm , Pliers sealing 150 mm , Ring spnr , Rules brass 600 mm two fold , Rules carpenter folding four fold 50 cm , Screw drivers instrument mechanics , Screw drivers instrument mechanics 0 , Screw drivers ratchet 20 mm , Shears tinmen scotch 400 mm , Shears tinmen snip bent 250 mm , Shears trimmers 300 mm , Spanner ADJ , Spanner adjustable single ended open JAW , Spanner OJDE AU spear head normal , Spanner Tubualer box DE BA No , Spnr am , SPNR DE , Spnr OJF DE stl pltd mm , Spnr OJF stl pltd mm , Spnr POP adj 200 mm , Spnr Ring cracked DE stl pltd , Spnr sckt , Spnr sckt bar extn , Tommy bar box spanner wrench T square , Tommy bar s box spanner wrench T square , Tongs farriers turning 355 mm , Tongs farriers turning 410 mm , Tongs smith flat 480 mm , Tongs smith flat 615 mm , Tommy bar box spanner wrench , Brush flat paint GS 13 mm , Megaphone 12 inch MK I Dry bty operated , Machine drilling portable electric heavy duty , Pliers Sidecutting 200mm , Grease Gun , Hammer Ball Pin 500gm , Materuak tube repair hot seal patch , Plug and socket assy , Spanner Adjustable 300mm , Spanner open , Open OJDE STL PLTD , Chisel cold flat carbon steel 20mm , Chisel firmer strong 32mm

Description: CATEGORY: Cement OPC 43 grade , Sand Coarse confirming to IS 3831970 , Aggregate 20 mm graded to be crushed rock , Aggregate 40 mm graded to be crushed rock , MS angle iron of size 65 x 65 x 6 mm and 4 point 20 Mtr , MS angle iron of size 65 x 65 x 6 mm and 3 poin 40 Mtr , MS Flat iron of size 40 x 5 mm and 2 poinrt 10 Mtr , TMT Bar of 10 mm dia and 3 point 10 Mtr , Chain link Fence 2 point 10 Mtr height , Two strand of barbed wire made out of GI wire of size 2.24 mm dia , Concertina Coil Punched Tape of 600 mm , Security Gate of size 6 point 00 M x 2 point 40 M as per drg att , MS Nut and bolt with washer of size 12 mm dia and 75 mm long. , MS Nut and bolt with washer of size 12 mm dia and 50 mm long , Binding wire 20 gauge 0.9 mm annealed , Shuttering plywood of size 6 feet x 4 feet and 12mm thickness , Nails 2 inch for shuttering , Nails 3 inch for shuttering , Nails 4 inch for shuttering , 2nd class hardwood plain fillets 3 point 00 mtr long and section 50mm x 50mm , Wooden scantling 3mtr long section 100mm x 75mm , TMT Bar 12 mm dia , TMT Bar 10 mm dia , TMT Bar 8 mm dia , Quick Setting Compound , Acrylic Emulsian Paint , Solar Street Light 25 W including pole having length 5 Mtr long 75 mm dia , Pan Motor Tasala 18 inch dia , Showel with wooden handle , Axes Picks 03 Kg head with handle , Wire mess for seving Sand 8 feet x 5 feet , Trowels as per ISI Mark , Brick Hammer 500 gm with handle , Stone Cracker with handle , Plum Bob steel , Nylon mason thread 100 Mtr long , Measuring Tape 05 Mtr retractable grade AI 16 , Measuring Tape 30 Mtr retractable grade AI 16 , Gum Boot , Hand Gloves Rubber , Drilling Machine portable , Steel Cutter Machine with blade , Steel Wood Cutter circular saw , Steel Cutting Blade 4 inch , Steel Cutting Blade 14 inch , Hexa Blade 350 mm long ISI 1st Quality , Welding Machine Portable inverter type , Welding Rod , Auto Darkening Welding Helment , Welding Gloves , Portable Diesel Generator Set 5 KVA , Tool kit , Tape Insulation 1 point 5 inch x 15 Mtr with ISI mark

Description: CATEGORY: Aluminium alloy connector with drive drab cromate over cadmiam plated with protective cap SHRG 32PK 10ESH4 , Aluminium alloy connector with drive drab cromate over cadmiam plated with protective cap SHRG 32P 10ESH4 , Aluminium alloy connector with drive drab cromate over cadmiam plated with protective cap JD 38999 by 26WC 4SN , Adopter GLENAIR 44 OHS 027NF 1304 02 0321 asper Sample and Drg JSS No 50860 , Straight Lipped boot 202K 163 RAYCHEM , Straight lipprd boot 202K 142 RAYCHEM , Y Transition boot 342A 034 3 RAYCHEM , Shielded braid tinned copper 16 x 24mm , Shielded braid tinned copper 10 X 16 mm , Shielded braid tinned copper 6 X 10 mm , Electrical Cable White M81044 by 9 12 06090 44A0811 12AWG 9 9 12 AWG 3Sq mm , Electrical Cable Red M81044 by 9 12 06090 44A0 112 5AWG 2 2 5 AWG 16 Sq mm , Electrical Cable Brown M81044 by 9 12 06090 44A0 111 20AWG 1 1 20 AWG 0 Point 52 Sq mm , Heat Shrinkable Tube Black DR 25 1 by 2 inches Raychem DR 25 1 by 2 inches Raychem , Heat Shrinkable Tube Black DR 25 3 by 8 inches Raychem , Heat Shrinkable Sleeve White 20 by 10 mm , Heat Shrinkable Sleeve Clear 20 by 10 mm , Heat Shrinkable Sleeve White 10 by 5 mm , Heat Shrinkable Sleeve Clear 10 by 5 mm , Heat Shrinkable Tube with Glue Adhesive Black 3 by 4 inches 3 by 4 inches , Lug Dia 8 Point 5 mm Dia , Round Solid silicon Rubber seal Strip Dia 2mm , Round Solid silicon Rubber seal Strip Dia 3 Point 5mm , One Step Clamping band straight entry size width 8mm BND 1225S Drg , Wire Mesh Shield Silver Coated Copper PMS width 30mm , Kapton Tape 25 x 0 Point 4 mm thk , Binding Wire ATC 0 Point 3 mm dia , Luminescent Paint White , Heat Treatment Silicon Adhesive Glue , Splice X11 210 509 , Solder Soft 16 SWG Sn 63 Percent Comma Pb 37 Percent , Solder Flux Lequid type , Plastic Cover 80 microns 18 inchesX12 , Permanent Marker Pen Black No 1523

Description: Dismantling Of Abandoned/condemned H.s. Tank Near Platform No.10 At Csmt Station. Remarks - Lot Is Approachable By Pakka Road. Loading Point Is 200 Metres Approx. Away From Lot And Cutting Materials To Be Lifted Manually And By Trolley Upto Loading Point. Trolley And Any Other Equipments Required For Loading Will Be Done By Purchaser Himself. Utmost Care Should Be Taken While Shifting Cut Materials Upto Loading Point Since There Is Heavy Rush Of Passengers In The Vicinity. M. S. Ferrous - 38.810 Mts (approx.) C.i. Items - 2.755 Mts (approx) The Delivery Of M.s. Ferrous/ci Will Be Made On Actual Weighment Basis Only At Hbhr Depot. The Weighment Will Be Done At Hbhr Depot. The Items Mentioned In The Description Only Will Be Delivered. In Case Of Excess Quantity Entire Quantity To Be Lifted By The Purchaser By Payment For Difference Of Actual Quantity Delivered With Lot Quantity. Dismantling Will Be Done By Taking Traffic And Power Block Period Only As The H.s. Tank Is Adjacent To Running Ohe Wires And Are Passing On Both Sides Of H.s. Tank. And To Be Dismantled Under The Supervision And As Suggested By Sse/wks/wdi. Sse/wks/wdi May Decide Whether Any Other Supervisors From Electrical, Engineering And S & T Are Required During Dismantling And Co-ordinate With Them Accordingly. Lot Number Is Exhibited/painted On The Tank. The Quantity Is Worked Out On Approximate Basis. Materials Like Electric Wires, Fittings & Cables And Other Such Kind Of Materials Available Inside/outside The Tank Which Is Not Within The Scope Of Lot Description, Shall Be Handed Over By The Purchaser To Custodian. The Items Used In Fencing Around The Structure Such As Rail, Tie Bar, Jali, Stone, Bricks, Wooden Pillar Or Any Other Items And Similar Type Of Material Lying Nearby The Structure/lot Will Not Be Delivered. Dismantling & Cutting Is Allowed For Easy Loading Purpose At The Risk & Cost Of The Purchaser. Dismantling Is Permitted Upto Ground Level Only. The Purchaser Should Ensure That During Dismantling & Cutting Operation No Nearby Structure/building Should Be Affected And Take Necessary Care/safety Precautions To Avoid Any Mishap As Well As Damage To Railway Property. The Purchaser Will Be Fully Responsible If Any Accident/unusual Incident Occurs At Work Site/place During Dismantling. Extra Precaution To Be Taken If There Are Trees Near The Structure Or Its Branches Are Spread Over The Same. Train Operations And Other Railway Work Should Not Be Disturbed/affected. All Debris Should Be Cleared Before Completion Of Delivery. The Purchaser Is Advised To See The Lot Site/content Before Bidding In Regard To Cutting, Loading Point. No Claim Will Be Entertained After Sale Of Lot. Location - Platform No.10 Csmt Near C & W Office. Total Quantity - 41.565 Mts (approx) Stock Holder - Sse (wks) Wdi. Note - Free Delivery Period Up To 80 Days.