Paint Tenders

Description: Contract notice – general guideline, standard regulation Open procedure (construction work) Restoration measures on wooden doors and wooden components Painting and varnishing work – coatings (DIN 18 363); Carpentry work (DIN 18 355); Fittings work (DIN 18 357); Restoration measures on wooden doors and wooden components Trade Restoration measures on wooden doors and wooden components Construction project: Interior renovation of the east wing – Eberbach Monastery Eberbach Monastery D-65346 Eltville Am Rhein (Rheingau, Hesse) The Eberbach monastery complex is the former Cistercian monastery of Eberbach with buildings from the 12th – 18th centuries. The building and the entire complex are listed buildings. The east wing, originally built in the Romanesque style, has been rebuilt and changed many times over the centuries. Measure: As part of the general renovation, the interior of the east wing is being renovated as an extension of the museum tour and meeting place. The work is being carried out while the museum is still in operation. The renovation and restoration measures are being supervised by the State Office for Monument Preservation in Hesse. This is a requirement of the monument protection laws and the primary goal of monument preservation measures is to preserve the original building fabric. Historic wooden doors and wooden fittings of medium to very high quality are to be restored, including fittings and metal components; in some cases, fittings are to be added. The aim is to conserve and restore the current inventory with the minimum necessary measures: the appearance after conservation or restoration should fit aesthetically into the overall picture of the various rooms and areas. After the work, the doors should not appear as new, but rather transform the existing appearance into a well-maintained one and protect the existing building from further deterioration. The measures in this tender for the restoration of wooden and metal components include - decontamination if wood preservatives are found (cleaning and masking if necessary) - the wooden construction - the wooden surfaces inside and out - the metal surfaces inside and out - the operation and lockability of the doors and fittings - some locking mechanisms (upgrading to a panic function in keeping with historic monuments) - exchange of expertise, coordination and acceptance of intermediate states, documentation of the work and concern: - a total of 11 doors (inside and outside); the doors are of different origins and were dendrochronologically dated between 1200 and 1900. - 6 wooden fittings (railings, balusters, kneeler, wall cupboard) - 3 windows - Approx. 26 m² of floorboards It is assumed that the work will be carried out on site - The work will take place while the monastery is in operation (events, visitors). The circumstances influence the construction process; the execution of the work will be coordinated accordingly. Additional minimum requirements EU-wide tender (summary) References/proof of: At least 5 years' experience in a specialist field corresponding to the service in question. Submission of at least 3 reference objects with clearly subtle handling of the existing building fabric. The reference services include comparably extensive structural measures in monument preservation with high monument care requirements and cooperation with restorers. Requirements for the responsible manager on site: 1. Certified master carpenter or comparable and a skilled tradesman restorer 2. Several years of professional experience in the area of monument preservation, with references in door restoration 3. Ability to manage and coordinate construction sites (proof of at least three construction site managers) 4. Ability to create project-appropriate documentation of measures in words and pictures (proof by submitting appropriate documentation) Requirements for the team on site: At least one other member of the team on site must be fluent in German (in the event of vacation or absence due to illness). For the skilled tradesman restorer to be employed as a specialist foreman (see above), in addition to master craftsman training, proof of collaboration on several comparable objects in the monument must be provided. For the employees to be employed, proof of qualified skilled tradesman training must be provided and comparable objects on which the respective employee has worked must be named. If the minimum requirements mentioned are not met, the offer will not be considered. Evidence must be submitted when the offer is submitted.

Details: Section 00100 Advertisement For Bids Project No. S-60-165a Assumption High School Building Repainting Assumption Parish School Board (herein Referred To As The “owner”) Sealed Bids Marked “sealed Bids” For The Assumption High School Building Repainting For Assumption Parish School Board, Project No. S-60-165a Will Be Received By The Owner For The Construction Of The Project Described As Follows: Assumption High School Building Repainting All Bids Shall Be Addressed To The Assumption Parish School Board And Must Be Submitted Electronically Online Only To Www.centralbidding.com No Later Than 10:00 O’clock A.m. On January 6, 2025. All Bids Shall Be Designated As “sealed Bid – Assumption High School Repainting.” Electronic Bidding Will Be Closed At 10:00 O’clock A.m. On January 6, 2025. All Electronically Submitted Bids Will Be Publicly Opened And Read Aloud At 10:00 O’clock A.m. On January 6, 2025, In The Conference Room Of The Assumption Parish School Board Office Located At 4901 Louisiana Hwy. 308, Napoleonville, La. The Information For Bidders, The Louisiana Uniform Public Work Bid Form, Contract Documents, Plans, Specifications And Forms Of Bid Bond, Performance Bond, And Other Contract Documents May Be Examined On Www.centralbidding.com. As A Requirement Under Louisiana Revised Statutes 37:2163, This Project Is Classified As Building Construction. The Awarded Contractor Must Be Licensed In Building Construction And Must Have The Following Subclassifications Or Employ A Subcontractor With The Following Subclassifications Or Specialty Licenses: Painting Or Waterproofing, Coating, Sealing, Concrete/masonry Repair License. Pursuant To Louisiana Revised Statutes 38:2212e.(1). Bidders Now Have The Option To Submit Their Bids And Bid Bonds Electronically. The Owner Will Only Accept Electronic Bids. The Bids Must Be Submitted On Www.centralbidding.com. Uploading Of Bidding Documents Are Of The Responsibility Of The Prime Bidder. The Owner Reserves The Right To Accept Or Reject Any And All Bids And To Waive Any Irregularities Or Informalities Incidental Thereto, And To Accept Any Bid Which The Owner Feels Serves Their Best Interest. Such Action Will Be In Accordance With Title 38 Of The Louisiana Revised Statues. A Mandatory Pre-bid Conference At Which The Scope Of The Project, Contract Time, And Other Requirements Of The Bidding And Contract Documents May Be Discussed, Or Any Other Special Requirements For The Project Which May Be Discussed With Prospective Bidders, Will Be Held At The Assumption Parish School Board Main Building, 4901 Louisiana Highway 308, Napoleonville, Louisiana 70390 On December 18, 2024 At 10:00 A.m., Local Time. All Questions Should Be Directed To Clarence J. Savoie, Iii, C.j. Savoie Consulting Engineers, Llc, 985-369-2341 Or Emailed To The Following: Cjs3@cjsavoie.com, Hll@cjsavoie.com, Bmt@cjsavoie.com, Dcm@cjsavoie.com. Last Date For Submitting Questions Is December 23, 2024 At 10:00 A.m., Local Time. Each Bidder Must Deposit With His/hers Bid, Security In The Amount Equal To Five Percent (5%) Of The Total Bid In The Form Of A Certified Check, Cashier’s Check Or Bid Bond. All Bidders Must Show Proof That He/she Is Licensed In The State Of Louisiana To Perform This Type Of Construction. Contractor’s Name And License Number Must Be Included With The Uploaded Bid. The Successful Bidder Will Be Required To Furnish A Performance And Payment Bond Written By A Company Licensed To Business In Louisiana, In The Amount Equal To One Hundred Percent (100%) Of The Contract Price. Certificates Of Insurance Will Also Be Required. The Contractor Shall Begin Mobilization And Procurement Of Necessary Materials Within Ten (10) Working Days Of The Receipt Of The Notice To Proceed. Any Person With Disabilities Requiring Special Accommodation Must Contact Assumption Parish School Board No Later Than Seven (7) Days Prior To Bid Opening. Participation By Minority And Female Owned Business, As Well As Businesses Located In Assumption Parish Is Encouraged. Assumption Parish School Board Dr. John Barthelemy, Superintendent Publish: December 3, 2024 December 10, 2024 December 17, 2024 December 24, 2024

Details: This Is A Sources Sought Notice For Information Only: This Is Not A Request For Quotes/proposals Or An Invitation For Bids. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Quotations Or Proposals. Submission Of Any Information In Response To This Market Survey Is Purely Voluntary And Will Be Used Only For Market Research Purposes To Determine Availability Of Sources, Commerciality, And Competitive Strategy. The Government Assumes No Financial Responsibility For Any Costs Associated With Any Response To This Notice As Incurred By Prospective Contractors. ****************************************************************************** project Title: Blanket Purchase Agreements (bpa) For Building And Maintenance Supplies. tracking Number: Ihs1503593 the Indian Health Service (ihs), Four Corners Regional Health Care Located In/at Teec Nos Pos, Arizona, Is Seeking Capable Sources For A Vendor To Provide An Assortment Of Building Supplies, Including Masonry Materials, Hardware, Various Types Of Filters, Painting Supplies, And Interior And Exterior Door Lock Systems. Additionally, The Facility Requires Drywall Supplies, Plumbing, Electrical, Heating And Cooling Supplies, Safety Equipment (ppe) And Janitorial And Cleaning Supplies On An As-needed Basis. the Anticipated Period Of Performance Is February 1, 2025 Through January 31, 2026. the Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 332510 Hardware Manufacturing With A Small Business Size Standard Of 750 Employees. the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To Provide Supplies With Those Described In This Notice. in Accordance With The Buy Indian Act, 25 U.s.c. 47, The Indian Health Service Shall Give Preference At All Times, As Far As Practicable, To Indian Economic Enterprises. If Your Firm Is Capable Of Providing The Supplies And/or Services Described In This Notice, Complete The Attached Representation Form And Submit It Along With The Rest Of The Requested Documents Identified In This Notice. the Responses To This Sources Sought Notice/market Research Will Be Used To Determine The Acquisition Strategy Such As Indian-owned Enterprise Set Asides, Total Small Business Set Aside, Any Other Socio-economic Set Aside, Or Unrestricted. note: If This Requirement Is Set-aside, Far 52.219-14 (deviation 2019-01) Limitations On Subcontracting Will Apply; Similarly-situated Entity Description Applies. This Clause Requires That The Concern Perform At Least 50 Percent (50%) Of The Cost Of The Contract, Not Including The Cost Of Materials, With Its Own Employees. submission Instructions: all Interested Sources Must Submit A Capabilities Package To The Primary Point Of Contact Listed Below, No Later Than (nlt) January 16, 2025 At 10:00am Mst at A Minimum, The Following Information Must Be Submitted To The Poc Listed In This Notice: confirm The Buy-indian Set-aside Status You Qualify For Under Following Naics Code: 332510 Hardware Manufacturing if The Proposed Naics Is Not The Customary Or Applicable Naics Relative To The Needs Description, Include Your Firm’s Proposed Naics And Rationale For The Different Naics. fill Out The Attached Ihs Buy Indian Act Indian Economic Enterprise Representation Form. if Non-indian, Indicate Firm’s Size – Small Or Other-than-small; And Other Socio-economic Program Participation Such As Small-disadvantaged, 8(a)-certified, Hubzone, Sdvosb, And/or Wosb/edwosb a Positive Statement Of Your Intention To Submit A Quote To An Upcoming Solicitation As A Prime Contractor. provide Firm’s Uei Number. evidence Of Recent (within The Last Five Years) Experience With Work Similar In Type And Scope To Include: contract Numbers project Titles dollar Amounts percent And Complete Description Of Work Self-performed. customer Points Of Contact With Current Telephone Number And Email Address. all Of The Above Information Must Be Submitted In Sufficient Detail For A Decision To Be Made On Availability Of Interested Qualified Buy-indian Parties. If Adequate Interest Is Not Received From Buy-indian Concerns, The Solicitation May Be Issued As Another Type Of Set Aside Or Unrestricted Without Further Notice. point Of Contact: thomasina Willie, Thomasina.willie@ihs.gov place Of Performance: four Corners Regional Health Care, Jct Us Highway 160 & Navajo Route 35, Teec Nos Pos, Az 86514 this Is Not A Solicitation.

Details: The United States Army Corps Of Engineers (usace) Sacramento District (spk) Anticipates One Solicitation For A Design-build (db) / Design-bid-build (dbb) Multiple Award Task Order Contract (matoc) For Construction, General Construction With A Maximum Capacity Of $99m And Pool Of Five (5) Contractors. matoc Scope: work Anticipated Under This Matoc Includes But Is Not Limited To The Construction Of Buildings Or Engineering Projects (e.g., Roadways And Utility Systems), Demolition, The Preparation Of Sites For New Construction. Construction Work Done Will Include New Work, Additions, Alterations, And Maintenance And Repair. Activities Will Include Construction Activities At Multiple Project Sites. Task Orders Will Include Activities To Produce Masonry, Painting, Electrical Work, And Other Specialty Trades. Activities Of Specialty Trades Can Be Conducted By The Prime Contractors Or Be Subcontracted. Matoc Will Primarily Be For Work Within The Sacramento District Area Of Responsibility Within California For Military Projects. this Work Will Be Accomplished With Individual Task Orders Against The Matoc. The Matoc Idiq Ceiling Is Estimated At $99,990,000.00 And Will Have A Pool Of Five (5) Contractors. The Average Requirement Completed Under This Matoc Is Anticipated To Be Between $2k And $6m. the Matoc Idiq Will Have A Five-year Ordering Period. The Preponderance Work Is Located Within The State Of California However, Requirements For Work Within The Greater South Pacific Division Spd Area Of Responsibility May Arise. Visit Usace Web Site Below For Map Of Spd. Https://www.usace.army.mil/missions/locations/ the Naics Code Is 236220, Commercial And Institutional Building Construction With A Size Standard Of $45 Million, And The Federal Supply Code (fsc) Is Y1jz, Construction Of Miscellaneous Buildings. the Solicitation Is Anticipated To Be Issued As A Total Small Business Set-aside Through The Procurement Integrated Enterprise Environment (piee - Https://piee.eb.mil) And Governmentwide Point Of Entry, The System For Award Management (sam - Www.sam.gov) On Or About 3 Jan 2025 it Is Currently Anticipated That The Government Will Conduct A Pre-proposal Conference And/or Site Visit During Phase Two Of The Solicitation. The Specific Date, Time, Location, And Access Requirements Will Be Identified In Any Forthcoming Solicitation. please Do Not Request An Updated Schedule If Estimated Dates Are Surpassed; The Government Will Release All Information Publicly Through Piee And Sam When Updates Are Available. Requests For Schedule Updates May Be Ignored. please Do Not Request A Copy Of The Solicitation As They Are Not Currently Available. Any Available Technical Data Will Be Furnished With Any Forthcoming Solicitation. Following Solicitation Release, All Responsible Sources May Submit A Proposal That Shall Be Considered By The Agency. This Project And/or The Anticipated Solicitation May Be Changed, Delayed, Or Canceled At Any Time. all Prospective Offerors Should Be Registered In The Piee System At Least One (1) Week Prior To The Anticipated Proposal Due Date. Registration Is Not Required To Download Any Forthcoming Solicitation Documents, Plans, And/or Specifications, But Is Required To Submit A Proposal. Copies Of The Solicitation And Attachments Will Be Made Available For Inspection Without Charge After The Solicitation Is Released, When Accessed Through Piee. Failure To Register In Piee Will Prevent Submission Of Proposals As The Government Will Not Accept Them By Any Other Means. See Linked Piee Registration Instructions And Web-based Training For Information About How To Access The Piee Solicitation Module And Submit Proposals. all Prospective Offerors Must Be Registered In Sam Before The Anticipated Solicitation Closing Date. Please See The Sam Website For Information About Sam Registration Requirements And Approval Timelines. usace Will Not Notify Prospective Offerors Of Any Changes To The Solicitation; Offerors Must Monitor Piee And Sam For The Solicitation To Be Posted, And For Any Posted Changes Or Amendments. the Only Interested Vendors / Plan Holders / Bidders List Is Available Through Sam.gov; Contractors Are Responsible For Identifying Their Entity As An Interested Vendor And Contacting Other Interested Vendors. Usace Spk Will Not Review Capabilities Statements Submitted In Response To This Synopsis Or Coordinate Partnering Arrangements Between Parties. Contractors Should Check Sam.gov Frequently For Changes To The Interested Vendors List And This Notice.

Details: Description Itb No. 2025-007 Republic Of The Philippines Province Of Romblon Municipality Of Cajidiocan Invitation To Bid For Construction Of Cambalo National High School Multi-purpose Hall- Cambalo, Cajidiocan, Romblon 1. The Municipal Government Of Cajidiocan, Romblon Intends To Apply The Sum Of One Million Nine Hundred Ninety-nine Thousand Seven Hundred Seventy-three And 65/100 (php 1,999,773.65) Being The Approved Budget For The Contract (abc) To Payments Under The Contract Construction Of Cambalo National High School Multi-purpose Hall – Cambalo, Cajidiocan, Romblon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. 2. The Municipal Government Of Cajidiocan, Romblon Now Invites Bid For The Construction Of Cambalo National High School Multi-purpose Hall – Cambalo, Cajidiocan, Romblon. Completion Of The Works Required Is 95 Calendar Days. Prospective Bidders Must Have An Experience Of Having Completed At Least One (1) Contract That Is Similar To The Contract To Be Bid Within The Last Two (2) Years From The Date Of Submission And Receipt Of Bids. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly In Section Ii, Instruction To Bidders. 3. Bidding Will Be Conducted Through An Open Competitive Bidding Procedures Using A Non- Discretionary ‘pass/fail’ Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act. Bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships Or Organizations With At Least Seventy-five Percent (75%) Interest Or Outstanding Capital Stocks Belonging To Citizens Of The Philippines, And To Citizens, Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Interested Bidders May Obtain Further Information From The Municipal Government Of Cajidiocan, Romblon And Inspect The Bidding Documents At The Address Given Below During Office Hours, 8.00 A.m. To 5.00 P.m. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of Non- Refundable Fee For Bidding Documents Pursuant To The Latest Guidelines Issued By The Gpbb, In The Amount Of Five Thousand Pesos Only (p 5,000.00) 5. Bids Must Be Delivered To The Address Below On Or Before January 30, 2025 –9:00 A.m. At The Municipal Engineer Office. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount As Stated In Itb Clause. Pre Bid Conference Is On January 17, 2025 – 9:00 Am. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Accepted 6. The Municipal Government Of Cajidiocan, Romblon Reserves The Right To Accept Or Reject Any Bid, To Annual The Bidding Process And To Reject All Bids At Any Time Prior To The Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 7. For Further Information, Please Contact/refer: Municipal Engineer/ Bac Chairman, Engr. Christopher M. Rizo Or Bac Secretariat Arc. Kathleen M. Rabino Lgu- Cajidiocan, Romblon. Signed Engr. Christopher M. Rizo Bac Chairman Date Of Posting: January 09, 2025 Item No. Description Quantity Unit Spl-i General Requirements 1 Lot Spl-ii Excavation & Stake-out 56.724 Sq.m Spl-iii Embankment 70.5 Cu.m 404 Reinforcing Steel 4,701.71 Kgs. 405 Structural Concrete 36.15 Cu.m 7043 (a) Masonry Works- Block- Laying 218.50 Sq.m 7043 (b) Plastering 485.00 Cu.m 1047 Structural Steel 1.00 Lot 1014 Pre-painted Metal Sheets 136.03 Sq.m Spl-iv Plumbing Works 1.00 Lot 803 Electrical Works (rough-in) 1.00 Lot Spl-v Ceiling Works 34.20 Sq.m Spl-vi Occupational Safety & Health Program 1.00 Lot

Details: Legal Notice To Bidders Sealed Bids For The Construction Of Fairhaven Raw Water Well Replacement Project, Will Be Received By The City Of Olive Branch At 9200 Pigeon Roost Road, Olive Branch, Mississippi 38654 Until 2:00 P.m. Local Time On Monday, January 13, 2025, And Thereafter Will Be Opened And Publicly Read. The Project Consists Generally Of The Construction Of One 1,000 Gallon Per Minute Raw Groundwater Supply Well, Including All Drilling, Test Holes, Raw Water Analysis, Reaming, Casings, Screen, Gravel Wall, Well Development, Well Testing, Well Cleaning, Cctv Inspection, Construction Of Pump Foundation, Well Pump, Discharge Head, Column Assembly, Shafts, Suction Pipe, Electric Motor, Water Level Indicator, Pressure Gauge, Discharge Piping, Check Valves, Flow Meter, Gate Valves, Insulation, Connection To The Existing Raw Water Line, Painting, Electrical And Controls, Site Work, Fencing, Site Restoration, Final Cleaning, And All Other Necessary And Appurtenant Work Required To Complete The Work As Described In These Specifications And Detailed In The Drawings. A Non-mandatory Pre-bid Meeting Will Be Held At 2:00 P.m. On Monday, January 6, 2025, In The 1st Floor Conference Room Of City Hall Located At 9200 Pigeon Roost Road, Olive Branch, Mississippi. Plans, Specifications And Contract Documents May Be Picked Up At The Office Of Karen Mcneil, Purchasing Manager, 9200 Pigeon Roost Road, Olive Branch, Mississippi (662-892-9208) Or Via Email At Karen.mcneil@obms.us. In Addition, Official Bid Documents Can Be Downloaded From Central Bidding At Www.centralbidding.com. Electronic Bids Can Be Submitted At Www.centralbidding.com. Electronic Bids Are Due The Same Time And Date As Sealed Bids. For Any Questions Relating To The Electronic Bidding Process, Please Call Central Bidding At 225-810-4814. Each Bid Must Be Submitted In A Sealed Envelope, Addressed To The City Clerk, City Of Olive Branch, 9200 Pigeon Roost Road, Olive Branch, Mississippi 38654. Each Envelope Must Be Plainly Marked On The Outside As “re-bid Fairhaven Raw Water Well Replacement Project” And Must Bear On The Outside The Date The Bid Is To Be Opened. Opened Bids Will Be Presented For Consideration At A Regular Meeting Of The Mayor And Board Of Aldermen Of The City Of Olive Branch. Each Bid Shall Be Accompanied By A Bidder’s Bond Issued By A Surety Company Licensed To Operate In The State Of Mississippi, In The Amount Of 5% Of The Total Bid Price, As A Guarantee That If The Bid Is Accepted, The Bidder Will Enter Into A Contract And Execute The Performance And Payment Bonds In The Form And Within The Time Specified. The Successful Bidder Will Be Required To Execute A Performance Bond And A Payment Bond, Each In The Amount Of 100% Of The Contract, Issued By A Surety Company Licensed To Operate In The State Of Mississippi And Shall Be Named In The Current List Of "companies Holding Certificates Of Authority As Acceptable Sureties On Federal Bonds And As Acceptable Reinsuring Companies" As Published In Circular 570 (amended) By The Audit Staff Bureau Of Accounts, U.s. Treasury Department. Each Bidder Shall Have A Certificate Of Responsibility To Bid On Contracts For Public Projects In Which The Bid Price Exceeds $50,000.00 And For Private Projects In Which The Bid Price Exceeds $100,000.00 As Required By The Laws Of The State Of Mississippi. Each Bidder Shall Show On The Outside Of The Envelope Containing His Bid: His Current Certificate Of Responsibility Number And Expiration Date Or If Applicable, A Statement Certifying That The Bid Enclosed Does Not Exceed $50,000.00 For A Public Project Or $100,000.00 For A Private Project. Failure To Show These Items On The Outside Of The Envelope Containing The Bid Will Result In The Bid Being Returned To Bidder Unopened. No Bidder May Withdraw His Bid For A Period Of Sixty (60) Days After Date Of Actual Bid Opening, Without The Owner's Consent. The City Of Olive Branch Reserves The Right To Reject Any Or All Bids In Whole Or In Part, With Or Without Cause; And To Accept The Lowest Bid Which In Its Judgment Will Be For The Best Interest Of The City Of Olive Branch. Witness My Signature This The 19th Day Of November, 2024. /s/ Tena Stewart, City Clerk

Details: Description Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 10- Arts And Crafts Support Service Area: Skills Development) 1. The Deped Schools Division Of Eastern Samar, Through The General Appropriation Act Of 2024 Intends To Apply The Sum Of ₱ 597,951.44 Being The Abc To Payments Under The Contract For Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 10- Arts And Crafts Support Service Area: Skills Development) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Deped Schools Division Of Eastern Samar Now Invites Bids For The Above Procurement Project. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Prospective Bidders May Obtain Further Information From Deped Schools Division Office Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 1,000.00. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped Schools Division Of Eastern Samar Will Hold A Pre-bid Conference On January 13, 2025, 10:00am At The Bac Office, Deped Schools Division Of Eastern Samar Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before January 27, 2025, 9:00am Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 27, 2025, 10:00am At The Given Address Below Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Only The Proprietor Or Authorized Representative May Be Allowed To Purchase Bidding Documents. Letter Of Intent (loi), Special Power Of Attorney (spa) (for Authorized Representative), And Drl (document Request List From Philgeps) Are Required Upon Purchase. 11. The Deped Schools Division Of Eastern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Items, Specifications, Quantity Of Delivery, And Abc: Sewing Machine Singer,15ch 179 Sewmaster, Automatic Bobbin Winder, Variable Stitch Length Control, Forward And Reverse Function, Numbered Dial Tension, Threadle Or Motor Options, Drop Feed Knob 5 Piece Utility Shelf, 1713s Utility Shelf 2 Pieces Table, Folding Table Ft-02 1200mm L X 400mm D X 750mm Ht., Structure: Melamine 3 Pieces Chairs, Cod Armchair Backrest Wood Horn Chair, 43x48x74, Material: High Quality Iron Wood, Max:150kg 6 Pieces Storage Cabinet, Dimension: 48*30*83cm, Material: Plastic, 3 Pieces Cork Bulletin Board, Wooden Frame, 30x40cm 1 Piece Glue Gun, Mitsushi Mit-gl40 40w, 100-240v, Hot Melt Glue Gun 2 Pieces Acrylic Color, Faber Castell, 12ml, 12 Colors 3 Pieces Scissors, Maped Reflex 3d Vivo Scissors, 16cm 4 Pieces Cutters, Ida Wallpaper Blade Cutter, Length 15cm, Width: 15cm 3 Pieces Watercolors, Prang 16 Watercolor Set 3 Sets Art Paper (multiple Colors), Avia Colors Assorted Colored Paper, 250 Sheets, 80 Gsm, Size: 8.5" X 11" 3 Reams Paint Brushes, Deli 73885 Brush Set 3 Pieces Yarn, Color, Dmc Natura Happy Cotton, 100% Cotton Yarnfor Crochet, Knitting And Yarn Crafts, Thickness: Light (8 Ply), Weight: 20 Grams, Length:43 Meters 10 Pieces Glue, Elmer's Glue, White 225 Grams 5 Pieces Colored Pencils, Staedtler Colored Pencil 136 C36 Luna Permanent 36 Colors 3 Sets Colored Pens, Faber-castell Coloring Pen, 12 Colors 3 Sets Sewing Pins, 40 Pieces 3 Pieces Sewing Needles, 16 Pcs Set Hand Sewing Needle, Size: S: 4cm (8pcs), M:4.5cm (6pcs)* L:5cm (2pcs), Mateial;stainless 10 Pieces Rotary Cutter, 45mm Fabric Rotary Cutter, Length:45m, Material:stainless Steel Blade+abs Handle, Color: Orange. Length: 165mm, Blade Diameter:45mm, Suitable For:leather Fabric Vinl Fiber Paper 2 Pieces Tape Measure, Deli 79650 Measuring Tape 150cm/60 Inches (1.5m*7mm) 10 Pieces Crochet Hooks, 100pcs Crochet Hook Set,perfect Round Point, Material: Plastic+metal, Size:18*13*3cm, Hook Size: 2mm,2.5mm,3.0mm,3.5mm,4.0mm,4.5mm,5.00mm,5.5mm,6.0mm,6.5mm 2 Pieces Knitting Needles, Sizes: 4,5,6 And 8 2 Pieces Crochet Thread, 5 Ply Monaco 100% Mercerized Cotton, Assorted Colors, Length:105 Meters, 50 Grams 20 Pieces Sewing Thread, Apple Spun Polyester Sewing Thread, Assorted Colors, 100 Meters, Polyester Material, 10pcs/box 2 Boxes Convertible Drawing And Drafting Table, Size: 24”x36” ▪color:raw Sienna / Brown ▪weight: 10-11kg 1 Piece Studio/painting Easel, Sizes: 85" - 120" Tall 2 Pieces Table/desk Painting Easel, Could Be An H Or An A Easel Type, For A Easel 38" To 75", For H Easel 84" To 96" 5 Pieces Manual And/or Electric Pencil Sharpener, Pencil Sharpener Hand Crank Manual Mechanical Pencil Sharpener,aluminum Alloy Knife Structure,cutting Outer Diameter Of 6.5-8mm Pencil 4 Pieces Wooden Mannequin, With Stand 11.5/14/21/30cm Wooden Human Mannequin Model Artist Movable Limbs Doll 2 Pieces Transparent Edge T-square, Hardwood Blade Dimensions: 30x13.5x0.2 Inches Weight: 14.4 Ounces Color: Wood Size: 36’’ 2 Pieces Carpentry Tools, Tool Set Includes: 1 – 9” Plastic Torpedo Level 1- Magnetic Bit Holder 1” Cr-v Bits Nut Drivers: 3/16”,1/4”,9/32”,5/16”, 11/32”,3/8” 10ft/3m Tape Measure 150mm Mini Saw 7” Locking Pliers 7-12” Diagonal Cutting Pliers 8” Long Nose Pliers 8” Adjustable Wrench 8” Water Pump Pliers Zinc-alloy Utility Knife Utility Knife Blade Black Cable Ties 160oz Claw Hammer Combination Wrench: ¼”, 5/16”, 3/8”, 7/16”. ½”, 9/16” Precision Screwdrivers:ph1, Ph0, Slotted:1/4, 2.0, 2.4, 3.0mm Metric Hex Keys: 1.5, 2, 2.5, 3, 4,5,5.5, 6mm Sae Hex Keys: 1/16”, 5/65”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, ¼” 16” Zipper Tool Bag Item Weight; 8.8 Pounds 17.7x9x9 Inches 2 Sets T50 Staple Gun, Size: 7x9x3 Inches 5/16” Staples 3 Pieces Slop Sink, Size: 30.2x18.4x10.0inch Color: 30”m Style: Single Bowl Material: Stainless Steel Thickness: 3.0-1.2mm 1 Piece Roofing Square Dual Marking Right Angle Picture Framing Carpenter Ruler, Steel 90 Degrees Roofing Square Measuring Size: 20x 30cm/8x12” Rustproof Size: 30x20.5x 20.5 Weight: 0.16kg 3 Pieces Professional Compound Mitre Box & Saw, Adjustable Angle 20x8x9 Inches Miter Box 22 Inches Back Saw 2 Pieces Drawing Lamp, Overall Dimensions: 1.5 “w X 3.5 “d X 29.5 “h Long, Bendable Neck 21” (53 Cm) 28 Led Bulbs Stainless Steel Wattage: 1 Can Be Mounted To Table, Desk Or Easel Usb Plug 2 Pieces Artists Taboret Made Of Beechwood. Measures 35-1/2"h X 17-1/2"w X 14-1/2"d 1 Piece Open Shelves Utility Rack, 72" Height X 48" Width X 18" Depth Five Adjustable Shelves 4,000 Lb. Capacity Steel Frame Particle Board For Shelves Rivet Lock Design With Nuts And Bolts 2 Pieces Chisel Rack For Wood Carving, 3/4″ Thick, And 2 Pieces 3/8″ Tall Plywood Number Of Slots May Vary 2 Pieces Corner Clamp, Maximum Clamping Range 7.5cm, Generally 4 Right-angle Clamp All Together To Use. Material: Aluminum Type: 4 -inch 20.00 X 10.00 X 10.00 8 Pieces Decorative Realistic Artificial Fruits, Assorted Plastic Fruits And/or Eco-friendly Foam Material 2 Sets Geometric Shapes Set, 8-12 Shapes/forms Wood And/or Non-toxic Plastic Shapes Include Sphere, Square, Cylinder, Round Cylinder, Cone, Cube, Hexagonal Prism, Triangular Prism, Square Based Pyramid, Octagonal Prism, Pentagonal Prism, And 1/2 Sphere 2 Sets Geometric Designer Templates, Scale: 0-20 Cm/0-24 Cm Size : 8-1/4" X 5.1" (l*w) Plastic And/or Steel Material 4 Pieces Stack Rack, Dimension: 30 In H X 21 In W X 17 In L At Least 6 Shelves May Be Wooden Or Metal Materials Devised With Rollers To Roll The Rack In Any Location 4 Pieces Picture Frame And Miter Clamp, Weight: 2.5 Pounds Dimensions: 23.9 X 9 X 1.6 Inches Wood Material 4 Pieces Heat Gun, Power: 2,000 Watts Temperature: 50 / 380 / 570 Celcius Steps: 3 Steps Air Flow: 500 / 300 / 500 L/min 4 Pcs Nozzles (air Blast, Reducing, Reflector, Paint Scraper) 1 Pc Scraper 4 Pieces Hot Plate Single Electric Stove, Power:1000w Non-stick Coating Auto-thermostat Various Heat Operations Operating On/off Indicator Light 2 Pieces Tape Dispenser, Weight: 1 Kg Hard Durable Plastic Material 2 Pieces Multi-function Three-hole Puncher, 11.75 X 2.75 X 2.75 Inches High Quality Metal Construction With Clip-in Rings 2 Pieces Metric Scale, 30 Centimeters In Length Scale: 1:1, 1:10, 1:2, 1:20, 1:5, 1:50, 1:100, 1:200, 1:500, 1:1000, 1:1250 And 1:2500 4 Pieces Steel Tape Measure, Tape Rule With First 6 Feet Reinforced With Bladearmor Coating For Maximum Durability 11-inch Tape Standout; 16-inch And 19.2-inch Stud Center Markings Simplify Framing Jobs Mylar Polyester Film Extends The Life Of The Entire Blade Heat-treated Spring Provides Long Life And Smooth Blade Recoil Stanley's Limited Lifetime ; Measures 1-1/4-inch-by-25-feet 3 Pieces Heavy Duty Circular Saw, Corded Or Cordless Adjustable Depth Diameter: 4 1/2 In. With Electric Brake Maximum Cutting Depth At 45 Degrees: 1 In. Maximum Cutting Depth At 90 Degrees: 1-9/16 In. Maximum Speed: 4500 Rpm Spindle Lock 20 Volt 5.5 Lb. 4 Pieces Abrasive Disc Cutter Machine, Electric Powered 18.5” H X 12.2” W X 21.25” D 2200w 14” Blade Diameter 15 Amps Motor (3600 Rpm) Cutting Capacity Of 4.5” At 90˚ And 45˚ 2 Pieces Manual Canvas Pliers, Specifically Designed For Electrical And Mechanical Works 3 Pcs. In 1 Set 1 Combination Plier 6" 1 Cutter Plier 6" 1 Long Nose 6" Offers Comfortable Hand Grip 3 Set Jet-bow Compass Set, Set Includes 6" Speed Compass With Inter-changeable Pen, Pencil, Divider Parts, And Replaceable Needle Points. 4½" Bow Compass With Inter-changeable Pen, Pencil, And Divider Parts. 6" Beam Bar And Slide Coupling For Circles Up To 28" In Diameter And 6" Friction Divider With Self Centering Gear Head And Replaceable Needle Points. Set Also Includes Mechanical Lead Holder, Slip Handle For Spare Ruling Pen, Lead Pointer, Center Tack, And Screwdriver. Packaged In See-through, Hard Plastic Case. 2 Sets Human Head Model, Plastic, Life-size Anatomical Cast With Removable Jaw And 3 Removable Lower Teeth Type: Skull Model Material: Pvc Dimension: App.21x15x19cm/8.27x5.91x7.48in Color: As The Picture Shown Quantity: 1 Set 1 Set Screw Drivers Set, Philips Or Slotted Sl 3/16 In. X 3 In. (x2), 3/16 In. X 6 In., Sl 1/4 In. 1.5 In., Sl 1/4 In. X 4 In. (x2), Sl 1/4 In. X 6 In. Ph1 X 4 In. (x 2), Ph2 X 1.5 In., Ph2 X 4 In. (x2) 2 Offset Screwdrivers 6 Precision Screwdrivers: Ph0, Ph1, Sl 1.4 Mm, Sl 2 Mm, Sl 2.4 Mm, Sl 3 Mm 2 Sets Pliers And Grip Set, 10 Piece Tray Set Includes 1 Each Of The Following: 10r, 10wr, 7wr, 7r, 7cr, 6ln, 9ln, 5wr, 6r, 11r Weight: 11.80 Lb 28.00 X 11.80 X 1.30 Inches 2 Sets Artist Stool With Wheels, Height Adjustable & 360° Swivel Soft Pu Leather Cushion Detachable Design Dimension: Seat Diameter: 16.2" Seat Height: 25.6"-35.8" Full Height: 37.4"-47.6" Max Weight Capacity: 300lbs 6 Pieces Screen Print Squeegee, Material: Natural Rubber, Wood, Stainless Hardness: 70 Durometer Length: 25cm/10" Width: 10cm/3.9" Thickness: 2.3cm/0.9'' 8 Pieces Mixing Paint Palette, Material: Stainless Color: Silver Size: Approx 6.75" X 5.5"compact 12 Pieces Carving Chisels For Wood, Material: 45# Steel And Wood Color: Wood Color + Silver Quantity: 12 Pcs Total Weight : 892 Kg Wooden Handle Length Of Each Chisel: 95mm/3.74” Total Length Pf Each Chisel: 20.5mm / 8.07” Size: 1x V-straight Parting Tool: 14.6mm / 0.57” 1x Round Nose Chisel: 7.8 / 0.31 1x Skew Wood Turning Chisel: 7.8mm / 0.31” 1x Bent Chisel: 7.8mm / 0.31” 1x Wood Chisel: 7.8mm / 0.31” 1x Skew Wood Turning Chisel: 8mm / 0.31” 1x Pointed Wood Chisel: 8mm / 0.31” 2x Straight Chisel: 7.8mm 13.7mm”/ 0.31” 0.54” 3x Straight Gouge: 12.8” 16.1mm 11.7mm/ 0.50” 0.63” 0.46” 2 Sets Files Set For Jeweler, Wood Carving, Craft Metal And Glass Stone, 10 Pcs / Set 5x180mm Stone Precision Needle Files Tool Woodworking Carving The Craft Metal Rasp Wood Hand Tools Material: Metal Color: Gray/ Silver Model: Needle Files Size : 14.5x1x1 Weight: 0.05 Kg 2 Sets Heavy Duty Multi-purpose Bench Vise, Jaw Width: 5", Opening: 4-1/4" Durable Cast Steel Construction Head Swivel 360 Degree Full 360-degree Rotational Jaws Unique "v" Jaws Provide 4 Point Holding Power 2 Pieces Anvil, Weight: 55 Lbs. (sculpture) 9 Lbs. (jewelry Works) Metalsmith, Jewelers Forming Tool, Essential For Jewelry Repair, Shaping, Flattening, Hardening Metals Material: Iron Surface Size: (l X W X H): Approx. 6 X 3.3 X 9cm/2.36 X 1.3 X 3.54inch, Height: Approx. 5.5cm/2.17inch 1 Piece Welding Protective Suite, Made Of High-quality Denim Material, It Can Be Worn Many Times, It Will Not Fade For A Long Time. Unique And Comfortable Design, Wear-resistance And Dirty Resistance. Reinforced And Stitched The Crotch, Cuffs, Pockets To Prevent Accidental Tearing. The Highly Elastic Cuffs Make It Comfortable And Convenient To Wear. Size: 170 Height: 168-173cm Waist: 76-84cm/29.9-33 Inches Weight: 57.5-135kg 5 Pieces Welding Apron, Features: Material: Constructed With Artificial Cow Suede Which Is Not Only Durable But Also Flexible, And The Apron Offer Puncture Resistance, Tear Resistance And Cut Resistance. Size: (approx) (lxw) 90x60cm/35.4x23.6inch, Long Full Coverage Apron Protects You Until The Knee When You Are Working. Friendly: The Straps On The Waist Can Be Adjusted To Fit Your Body Better. They Are Designed To Hang Over The Shoulder Which Means That Weight Is Distributed Evenly Over The Shoulders. Never Suffer Neck And Back Pain Again. Pockets: 6 Pockets For Tools And Work Accessories, Include One Cell Phone Pocket And One Pencil Pocket. You Can Put Everything You Need Close To Hand In It Instead Of Constantly Search For Them. The Cell Phone Pocket Is Deep To Prevent The Phone From Falling Out. Application: Not Only For Woodworking And Welding But Also Useful For Many Other Work And Home Tasks Like Bbq And Gardening, Unique Gift Apron For Men, Women, Mothers, Fathers. Specifications: Material: Artificial Cow Suede Color: Yellow Size: (approx) (lxw) 90x60cm/35.4x23.6inch Package Included: 1 Pc X Apron 5 Pieces Welding Hood Caps, Flame Retardant Cloth Full Protection This Welding Hood Offers An Essential Mix Of Durability, Comfort And Protection. The Hood Features A Mesh Lining To Allow Sweat Vapour To Quickly Evaporate The Presoftened, Lightweight, Air Cushioned Fabric For Maximum Comfort. This Hood Can Protect Your Neck, Face And Head From Welding Fire Flash, Splash Very Well. Wear-resistant, Fire-retardant, Spark-proof, Double Protection Of Personal Safety And Sweat Absorption Specification: - Long :approx. 45cm/ 17.72inch - Shoulder Width: Approx. 43cm/16.93inch(xl) 5 Pieces Welding Gloves 10.5" Welding Leather Gloves Hgvc01 *winland* Product Description • Size: 10.5" • Use For Driver, Machining Operator Etc. • All Applications Which Require A High Level Of Anti-skid And Abrasion-resistant • Applying Universally To The Transporting And Cargo Handling Workers, Recycling Work, And Horticulture Workers, Drivers And Etc. • Cow Split Leather Gloves • Full Palm, Full Lining • Made With Top Quality Material For Industrial And Commercial Use 5 Pieces Welding Protective Visitor Glasses, Protective Visitor Glasses: Anti-fog With Uv Protection Glasses Product Name：safety Eyewear Glasses Color：clear, Dark Grey Feature：protective Glasses Lens Color：clear, Dark Grey Style：work Safety Glasses Package：blister Size: 17*17*7cm 5 Pieces Welding Helmet, Ingco Auto Darkening Welding Helmet Ahm009 Viewing Area:90×35mm Cartridge Size:110×90×10mm Arc Sensor:2 Light State:din 4 Dark State:fixed Shade 10 Shade Control:unadjustable Power On/off:fully Automatic Sensitivity Control:unadjustable,auto Uv/ir Protection:din 16 Power Supply:solar Cells. Re-chargeable Battery .no Battery Change Required Switching Time:1/5000s,from Light To Dark Dark To Light:0.15-0.45s Auto Low Amperage Tig:≥20amps(dc), ≥20amps(ac) Operating Tep:-5°c~+55°c Storing Tep:-20°c~+70°c 5 Pieces Welding Mask, Product Details Of Heavy Duty Welding Mask (108x50x3mm) Movable Glass Impacted Resistant Shell Anti Wear Moveable Type Glass Packing: Polybag With Color Sticker 5 Pieces Hard Hat, Hard Safety Helmet With Chin Strap Color: Blue, Orange, White, Yellow Material: Acrylonitrile Butadiene Styrene (abs) Shell, With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap Tough, Lightweight, Durable With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap. A Hard Hat Is A Type Of Helmet Predominantly Used In Workplace Environments Such As Industrial Or Construction Sites To Protect The Head From Injury Due To Falling Objects, Impact With Other Objects, Debris, Rain, And Electric Shock. Durable, Lightweight And Comfortable 12 Pieces Compact Electric Kilns, Degree F (max): 2300°f Cone: 6 Firebrick: 3" Volt: 240 / 208 Watt: 3,600 Ampere: 15 Recommended Breaker (amp): 20 Receptacle: 6-20 Size Interior (wide X High X Deep): 13.5 X 13.25" Size Exterior Including Stand (wide X High X Deep): 22 X 28 X 25.5" Volume (cu Ft.): 1.22 1 Piece Heat Press Transfer Machine, Electric Powered 21.2 X 20.2 X 19.2 In. 220v 1800w 0-400˚f (0-220˚c) 0-999 Sec. 1 Piece Rubber Mallet, Rubber Hammerhead Fiberglass Handle Packing: Color Label Weight: 32oz 4 Pieces Ball Peen Hammer, Material: Fiberglass Handle & Steel Head Size: 16 Ounce Weight: 3.7 Pound 4 Pieces Cutting Mat, Flexible Cutting Mat A2 Size (24 X 18 Inch) Self-healing 5 Layered Double Sided With Marked Pattern And Grids (green) Material: Polyvinyl Chloride Color: Green Item Dimensions: 15 X 15 X 15 Centimeters Shape: Hexagonal Weight: 200 Grams 6 Pieces Heavy Duty Extension Wire, Heavy Duty Extension Power Strip With Safety Switch Protection Socket 4 Meters, Extension 3 Pieces 36” Smart Led Tv, Width 96.74cm, Gross Weight: 10.8 Kg, Net Weight 7.9kg, Height 57.18, Length 7.99cm, Screen Size: 43-inch, Tv Resolution: Full Hd 2 Piece Laptop Computer, Laptop Screen Size: 15 Inches, Graphics Chipset: Integrated, Storage Capacity:512gb, Storage Type: Ssd, Ports/interface: Usb 2.0, Usb 3.0, Vga, Processor Type: Intel Core I7, Number Of Cores: Dual-core, Os:windows, Weight:3 Kg, Battery Capacity 4910mah, Cpu Frequency: 2.9ghz 1 Piece Photo Printer, Wireless Photo All-in-one With Auto Duplex Printing Print, Scan, Copy Auto Duplex Printing Wireless, Wireless Pictbridge, Mopria, Airprint, Direct Wireless Recommended Monthly Print Volume: 30 - 100 Pages Operating System: Win 8 / Win 7 / Vista / Xp, Mac Os X 10.7.5 And Later Borderless Printing: A4 / Letter / 4 X 6" / 5 X 7" / 8 X 10") Standard Paper Input (front Tray): 100 Sheets (a4/ Ltr) / 20 Sheets ( 4 X 6 “ ) Paper Weight: 64 To 105 G/m2 Up To 300 G/m2 Dimension (w X D X H): 449 X 304 X 152 Mm Weight: 5.4 Kg Interface / Connectivity: Usb 2.0 Hi-speed / Wireless Lan /wireless Pictbridge, Direct Wireless Scanner Type: Flatbed 1 Piece Portable Sound System With Microphone, Led Lights 2 Wireless Microphone Wired Microphone / Guitar / Line In Mic Priority Over Voice On/off Line Out Remote Control Usb / Bluetooth / Nfc / Fm Capabilities Frequency Response: 50hz-20khz Power System: Ac Adaptor / 12vdc In / Internal Rechargeable Battery 100v-240v, 60hz Power Supply Adaptor 1 Set 50” Led Tv, Height: 64.42 Cm, Width:111.68cm, Length:5.99cm, Gross Weight:16kg. Screen Size: 50-inch Led, Net Weight: 11.6kg, Tv Resolution: 4k Ultra Hd, Connectivity: Wireless Lan Built-in (wi-fi), Hdmi Ports: 3, Usb Ports:1 2 Piece Soft Box With Stand, 2 Pcs Studio Lighting Softbox 50*70cm, 2 Pcs 2m Light Stand, 2 Pcs 45w Light Bulb, Photography Kit 100-240v, Maximum Height: 200cm/78", Collapsible Height:65cm/32" 2 Pieces Display Panel Board, Product Weight:8kg, Choose Type:fabric,number Of Panels:4,type: Pole And Panel,graphic Type: Loop Nylon, 900x600mm Or 1000x700mm 6 X 900mm Poles 25 Mm Diameter With Clips Weight Approx 11-14kg 1 Piece Magnetic Whiteboard, Size:4x8 (48x96 Inches) Feet, Aluminum Frame,with Sliding Whiteboard Marker/eraser Tray,protective Plastic Rubber Corners 1 Piece Chalkboard, Length: 60.5", Height: 36.5",unit Weight: 24.00 Lbs Per Unit Color: Black Duro-slate Over ¼”hardboard Backing, Full Length Chalk Tray 1 Piece Offline Mini Compressor, 220v 60hz, Type: Single Cylinder Piston Compressor With Air Tank, Power: 1/6hp, Speed: 1700r.p.m, Air Output Per Min/lit.:20-23l/min, Auto Stop, Start At 3bar (43 Psi) Stop At 4bar (57psi), Working Pressure:0-4 Bar, Air Tank:3.0l, Suitable For Airbrush With Nozzle 0.2mm-1.0mm, Weight: 5kg, Dimension: 31x13x31cm 1 Pieces Styrofoam Cutter, Material:plastic, Size:approx. 190x90mm, Power: 2xc Size Battery (not Included), Feature: Electric Wire Needle Shap, Stainless Steel Wire, Hardness And Diameter Of 0.19mm 1 Piece Potter’s Wheel/electric Potter’s Wheel, Detachable Abs Basin, Advanced High-quality Brushless Motor, Rotary Speed:0-300 Rpm, Pottery Wheel: 25cm, Pottery Forming Machine:350w,electric Pottery Wheel With Foot Pedal And Detachable Basin, Rated Voltage: Ac 110v, Wheel Diameter: 25cm (9.8"), Speed: 0-300r/min, Working Noise:,60 Db, Gross Weight: 14kg (31.1 Lb), Package Dimensions (lxwxh) 53x42x35cm (20.8"x16.53"x13.78") 2 Pieces Weather-proof Safety Box Circuit Breaker, Metal Enclosure Panel Box, Weatherproof, Height:300mm, Depth:150mm, Door: 0.8mm, Body: 0.8mm, Plate: 0.8mm, Metal Body,width:400mm 1 Piece Fire Blanket, 120x99x4cm (l X W X H) Woven Glass Fiber 2 Pieces Exhaust Fan, Size: 12" 9" 6" Rpm: 1350, 1320, 1290 Finish: Power Coated 2 Pieces Medicine Cabinet, Stainless 20x26x5 Inch Single Door Medicine Cabinet 1 Piece Smoke Detector, 120 Volts Ionization Sensor, Clamshell Packaging 1 Piece Disposal Bins, 50 Cubic Movable Bins 2 Pieces Abc = 597,951.44

Details: Description Combative Sports Equipment 1 40 Pairs Arnis Padded Sticks "size: 28 Or 30 Inches Long Color : Red 20 Pcs Color: Blue 20 Pcs." 2 2 Pcs Arnis Live Stick Armor "color Blue (1 Pc) Color Red (1 Pc) Size: # 1 For Adult " 3 20 Pcs Painted Live Stick (rattan) "color: Red (10 Pcs) 'color: Blue (10 Pcs)" 4 5 Pcs Arnis Wooden Sword Replica "material: Mahogany Wood / Yakal / Bahi Wood 'weapon Type: Kris 'use For Arnis Anyo" 5 5 Pcs Arnis Wooden Dagger Replica "material: Mahogany Wood / Yakal / Bahi Wood 'weapon Type: Knife 'use For Arnis Anyo" 6 2 Pairs Arnis Live Stick Hand Gloves "size: # 1 Color: Blue Size : # 1 Color: Red Velcro Strap" 7 4 Pairs Arnis Live Stick Leg Guard "size : # 2 Large Color : Blue Size : # 2 Large Color : Red Velcro Strap And Garter Strap " 8 4 Pcs Arnis Live Stick Arm Guard "size : # 2 Color : Blue Size : # 2 Color : Red Velcro Strap And Garter Strap " 9 2 Pcs Taekwondo Head Gear "with Thick Gartered Strap And Chin Protector 'round Air Channels 'double-layer Ear Padding 'color: Red Sizes: 1 Pcs. Large 'color: Blue Sizes: 1 Pcs. Large 'philippine Taekwondo Association (pta) Approved." 10 30 Pcs Single Mouth Guard "color: Transparent Design: Single Mouth Guard Size : 30 Pcs. Senior Size" 11 2 Pcs Taekwondo Body Armor "size Large (1 Pc) 'size Extra Large (1 Pc) High-grade, Leatherette Material 'criss-cross Tying System, Shoulder Guards, And Back Guards. Colors: Blue, Red (reversible) Philippine Taekwondo Association (pta) Approved " 12 3 Pcs Taekwondo Groin Guard (male) "1 Pcs. Large '2 Pcs Xtra Large 'dual-velcro Strap Color : White Philippine Taekwondo Association (pta) Approved " 13 3 Pcs Taekwondo Groin Guard (female) "2 Pcs. Medium '1 Pcs Large 'dual-velcro Strap Color : White Philippine Taekwondo Association (pta) Approved " 14 3 Set Taekwondo Pu Elite Shin And Arm Guard With Elbow Support "2 Pcs. Large '1 Pc Xl '(pu Shin And Arm With Elbow Guard Protection) 'color: White 'philippine Taekwondo Association (pta) Approved" 15 3 Pairs Taekwondo Hand Gloves "1 Pcs. Size : Xtra Large 2 Pcs. Size : Large 'color : White 'soft Synthetic Leather 'semi-open Palm 'spandex Type Strap With Velcro Strip Philippine Taekwondo Association (pta) Approved " 16 3 Pairs Taekwondo Foot Gloves "1 Pc. Size : Medium '1 Pc. Size : Large 1 Pc. Size : Extra Large 'color : White 'soft Synthetic Leather 'semi-open Palm 'spandex Type Strap With Velcro Strip Philippine Taekwondo Association (pta) Approved " 17 8 Pcs Double Kick Pad "dual Face Targets 'with Wrist Strap 'color : Black 'made From Synthetic Leather And Eva Foam 'philippine Taekwondo Association (pta) Approved" 18 5 Pcs Taekwondo Kick Shield "color : Black 'made From Synthetic Leather And Eva Foam '6 - 8 Inches Thick Foam With 2 Back Hundle " 19 8 Pairs Karate - Gloves And Hand Protector "world Karate Federation (wkf) Approved 'removable Foot Attached To The Shin With Velcro 'size Small (1pc Red, 1 Pc Blue) 'size Medium (1 Pc Red, 1 Pc Blue) 'size Xtra Large (2 Pcs Red, 2 Pcs Blue) 'high-grade, Leatherette Material 'criss-cross Tying System, Shoulder Guards, And Back Guards. 'colors: Blue And Red " 20 8 Pairs Karate - Do In Step Shin Guard And Foot Protector "world Karate Federation (wkf) Approved 'removable Foot Attached To The Shin With Velcro 'size Small (1pc Red, 1 Pc Blue) 'size Medium (1 Pc Red, 1 Pc Blue) 'size Xtra Large (2 Pcs Red, 2 Pcs Blue) 'high-grade, Leatherette Material 'criss-cross Tying System, Shoulder Guards, And Back Guards. 'colors: Blue And Red " 21 5 Pcs Karate Chest Body Protector "world Karate Federation (wkf) Approved 'thickness : 4-6cm, Lace Type, 'hick High-elastic Foam 'size: Small 1 Pc 'size: Medium 2 Pcs 'size: Xtra Large 2 Pcs Color : White" 22 10 Pcs Badminton String "gauge0.61 Mm / 22 Ga 'length 10 M (33 Ft) 'core High Intensity Nylon Multifilament 'color: Any" 23 50 Tube Shuttlecocks "material: Grade Feathers Goose '12 Pcs. Per Tube 'speed : 77 '25 To 28 Mm (0.98 1.10 In Diameter Cork '62 To 70 Mm (2.4 To 2.8 In) Length 16 Pcs. Goose Feather For Competition Standard " Boxing Equipment 24 1 Pair Boxing Gloves "100% Genuine Leather Velco Wrist Strap Weight : 16 Oz Color : Any Color 1 Pair Weight : 16 Oz Association Of Boxing Alliances In The Philippines (abap) Approved " 25 2 Pairs Boxing Mitts "material : Syntetic Leather, Eva Foam Velco Wrist Strap Pad Area: 23cm H X 18.5 Cm W" 26 8 Pcs Boxing Mouth Guard "8 Pcs. Senior Size 'color: 4 Red And 4 Blue 'association Of Boxing Alliances In The Philippines (abap) Approved " Ball Games Equipment 27 4 Pair Football And Futsal Goalkeeper Gloves "material: Polyurethane, Ethylene Vinyl Acetate, Rubber Size: 2 Pairs Large And 2 Pairs Extra Large Color: Any Color For Adults" 28 12 Pcs Football Ball "leather Or Synthetic Leather. 'circumference Of 68–70 Cm (27–28 In) 'weight Of Between 410–450 G (14–16 Oz) 'size : 5 'fifa-approved" 29 6 Pcs Futsal Ball "leather Or Synthetic Leather. 410 – 430 G Size : 4 'fifa-approved" 30 10 Pcs Volleyball Ball "circumference (mm) 650- 670 Weight (g) 260- 280 For Indoor Volleyball Double Dimpled Microfiber Mv 300 Size : 5 'latest World Fivb Official Ball Approved " 31 10 Pcs Sepak Takraw Ball "3 Pcs For Women Size And 7 Pcs For Men Size Size: 0.41m To 0.43m 12 Holes And 20 Intersections Circumference (13 Cms Diameter) 42 To 44 Cm (16.5–17.3 In) For Men And From 43 To 45 Cm (16.9–17.7 In) For Women 'approved By Istaf" 32 6 Pcs Basketball Ball (women) "circumference: 29.5 Inches (75 Cm) Size :6 Weight: 22 Oz 12 Panel And 2 Tone Design" 33 4 Pcs Basketball Ball (men) "circumference: 29.5 Inches (75 Cm) Size :7 Weight: 22 Oz 12 Panel And 2 Tone Design" 34 2 Pcs Coaching Board "sport: Basketball Material : Pvc" 35 24 Pcs Baseball Ball "material: Lether Cushioned Cork Center 9 To 9.25 Inches (229 To 235 Mm) Weight: 5 To 5.25 Ounces Official Ball" 36 24 Pcs Softball Ball "optic Yellow Synthetic Cover With Red Stitching Cor .52, Max 300 Lbs. Size: 11"", 12"" Material: Synthetic Leather" 37 2 Pc Volleyball Net "material : Mesh Rein Nylon 210t, 60 Reins Upper Cable: Steel Cable 3.0mm Upper Belt: 7cm, Bottom Belt 5cm, Tarpaulin Meets Fivb Regulation Color: Black Size 1m (width), 9.5m (length), 10cm Square Box Net" 38 1 Pc Beach Volleyball Line "outside Sand Court Dimensions: 52.5 Ft Length By 26.2 Ft Width Or 16 M By 8 M 2 Inches Line Width Material: Nylon Color Black + Anchors 'with Carrying Bag" Athletics Equipment 39 2 Pcs Starting Block "height: 50 Mm Length: 86 Mm Width:82mm (rail Width) 'chrom Plated 8mm Steel Plate 'weight : 9kg Aluminuim Pedal: Block Rubber Matt Pedal Size1: 20mm×190mm Adjustable Height :15-22cm Bottom Is Equipped With Nail And World Athletics Approved" 40 400 Pcs Stainless Spikenails "shape: Pyramidal Form Size : 6 Mm 400 Pcs For All Brand Of Track And Field Shoes" 41 2 Pcs Athletic Discus "weight :1 Pc 2 Kg / 22cm In Diameter For Men Weight: 1 Pc 1 Kg / 18cm In Diameter For Women" 42 1 Pcs Meter / Metro Length: 100 Meter 43 2 Pcs Javelin "1pc 600g For Women 1pc 800g For Men World Athletics Approved" 44 1 Set Athletics Relay Baton "300 Mm Long X 38 Mm Diameter For Adults 8 Pcs Per Set World Athletics Approved" 45 8 Pcs Athletic Hurdles "adjustable Material: Aluminum And Hard Pvc Plastic Height : 0.76 - 1.06 Cm Length: 1.2 M Depth 0.71m Weight: 14kg " 46 20 Pcs Muller Tape "made Of Hospital-grade, 100% Cotton Backcloth Size: 1 And 1/2 Inche 3.8cm For Sports (1 Roll) Color: White" 47 20 Pcs Pro Warp Tape "size: 1 And 3/4 Inches Material:foam" 48 20 Pcs Muscle Tape (kinesiology Tape) "elastic Waterproof 16 Ft. Uncut Roll Color : Any Color" 49 30 Cans Topical Aerosol Rapid Relief Spray 50ml Table Tennis Equipment 50 20 Boxes Table Tennis Ball "size 44 'color: White Tri Star Professional Competition Standard" 51 10 Pcs Table Tennis Rubber Sheets "class: High Tension Pimples - In 'surface: Pimples - In 'speed: 13 Spin: 10 Thickness : 2.1 Mm Color : Black 10 Pcs. Hardness: 35 Professional Competition Standard (for Varsity Athletes)" 52 10 Pcs Table Tennis Rubber Sheets (backhand) "class: High Tension Pimples - In 'surface: Pimples - In 'speed: 13 'spin: 10 'thickness : 2.1 Mm Color : Red 10 Pcs. Hardness: 35 'professional Competition Standard (for Varsity Athletes)" 53 2 Pcs Table Tennis Racquet Adhesive "100 Ml 'water Base Glue" Swimming Equipment 54 6 Pcs Kick Board "color: Any '17 X 11.5 Inches 'for Adults" 55 6 Pair Hand Paddle "length: 21 Width: 18 Size Small (2pcs) 'length: 23 Width: 20 Size Medium (2pcs) 'length: 25 Width: 21 Size Large (2pcs) For Adults" 56 4 Pairs Swimming Fins "size: 8 (1 Pc) Size: 9 (1 Pc) Size: 10 (1pc) Size: 11 (1pc) For Adults" 57 4 Pcs Snorkle (front) "silicone Mouthpiece Front Configuration 44 Cm / 17.32 Inches" 58 2 Pcs Swimming Resistance Parachute "30 Cm - 40 Cm (2pcs) With Belt And Clip " 59 4 Unit Massage Gun Machine "30 Speed (5 Constant Speed And 2 Automatic) '6 Heads 'battery Capacity: 1500mah 'material: Plastic And Metal Paint 'rechargable 2-3 Hours" 60 15 Pcs Yoga Column Roller "size: 33 X 14 Cm 'material: Eva 'color: Any Color" 61 25 Tubes Lawn Tennis Ball "4 Pcs Per Tube 'color: Yellow Green 'itf Approved (for Professional)" Note: All Equipment Is To Be Double-checked By The Bulsu Coaches For Authentication Purposes. By Lot

Details: This Is A Sources Sought Notice Only. This Is Not A Request For Proposal, Request For Quote, Or Invitation For Bid. There Will Not Be A Solicitation, Specifications, Or Drawings Available At This Time. the United States Army Corps Of Engineers (usace), Seattle District, Is Seeking Information Regarding The Capability And Availability Of Qualified Contractors To Provide Repair Operations And Preventative Maintenance Of World War Ii Era Wood And Relocatable Facilities. this Sources-sought Notice Is A Tool To Identify Businesses With The Capability To Accomplish Contract Requirements And Is For Information/market Research Purposes Only And Does Not Obligate The Government Or Contractor In Any Way. the Type Of Solicitation To Be Issued Will Depend Upon Information Received In Response To This Sources Sought Notice. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Notice, Or Any Follow Up Information. Responses To This Notice Will Be Used By The Government To Make Appropriate Acquisition Decisions. the Information Provided Must Contain Enough Detail To Demonstrate Ability From Contractor's Which Can Meet The Government's Requirement As Described In The Project Information Listed Below. It Is The Intent Of The Government To Solicit And Award A Firm Fixed Price (ffp) Contract That Will Be Procured In Accordance With Far, Dfars, Afars, And Usace Acquisition Instructions. The Anticipated Performance Period For The Subject Contract Is A Base Year Of Twelve (12) Months From Date Of Award And 4 Option Years. The Solicitation Is Anticipated To Be A Request For Quote (rfq) That Will Be Evaluated Based On Lowest Price With Acceptable Past Performance. project Information: repair And Maintenance Of Approximately 128 Wwii Era And Relocatable Government Owned Facilities. The Majority Of Work Performed Under This Contract Will Be Minor Repair Services On A Call Basis And Yearly Maintenance Services. The Contractor Will Establish A Customer Service Center To Receive And Respond To Customer Requests For Repairs And Will Also Establish An Effective System For Scheduling And Performing Scheduled Preventative Maintenance On All Building Equipment And Systems Requiring Preventative Maintenance. Repairs Cover A Wide Variety Of Services And Trades, Such As Mechanical And Electrical Work, Carpentry, Roofing, Plumbing, Patching/painting, Etc. Preventative Maintenance Will Be Performed Throughout The Year For Small Types Of Equipment Located In The Facilities. all Work Will Be Performed At Jblm, Wa. The Contractor Shall Provide All Necessary Personnel, Equipment, Supplies, Facilities, Transportation, Tools, Materials, And Supervision Necessary To Perform The Required Services, Except As Otherwise Provided. submission Requirement: Interested Parties Are To Provide Their Firm's Capabilities On No More Than 10 Pages And Should Include The Following: 1) Company Cage Code, Duns, Name, Address, Point Of Contact And Applicable Telephone Numbers And E-mail Addresses 2) Small Business Designation As Recognized By The Small Business Administration (8(a) Certified, Hubzone, Veteran-owned Small Business, Service-disabled Veteran-owned Small Business, Women Owned Small Business, Or Economically Disadvantaged Women Owned Small Business) 3) Provide The Following Information On Your Three (3) Most Recent Contracts For Projects Of Similar Size And Scope You Have Performed: (a) Contracting Agency Address (b) Contract Number, Date And Amount Of Award, Date Of Completion (c) Was Your Company The Prime Or A Subcontractor? (d) Description Of Items/services Provided Under The Contract. 3) If Your Firm Has Never Contracted With The Federal Government As A Prime Contractor, Or As A Subcontractor To A Prime, Provide The Above Information On Your Three (3) Most Recent Contracts For Projects Of Similar Size And Scope You Have Performed For Commercial And Non-federal Government Customers. please Submit To: responses To This Sources Sought Notice Must Be Received No Later Than 2:00 Pm (pacific Time) On 08 January 2025. Submit Responses Only To The Attention Of Dwain Graham, Contract Specialist, At Dwain.m.graham@usace.army.mil And Renee Krahenbuhl, Contracting Officer, At Renee.m.krahenbuhl@usace.army.mil. all Interested Firms Must Be Registered In System For Award Management (sam) And Remain Current For The Duration Of The Contract To Be Eligible For Award Of Government Contracts. *do Not Send Hard Copy Advertising Or Promotional Materials. Please Ensure That All Responses Are Comprehensive. All Information Is To Be Provided On A Voluntary Basis At No Charge To The Government. There Is No Entitlement To Payment Of Direct Or Indirect Costs Related To Or Arising Out Of Responding To This Request For Information. All Information Provided Becomes Property Of The Government. There Is No Guarantee, Expressed Or Implied, That The Market Research For This Acquisition Will Result In Any Guarantee Of Award Or Acquisition Strategy.

Details: Combined Synopsis/solicitation – Boundary Line Maintenance For B. Everett Jordan Lake, Moncure, Nc solicitation No. W912pm25q0006. This Solicitation Is Issued As An Rfq. this Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Far Subpart 12.6 – Streamlined Procedures For Evaluation And Solicitation For Commercial Products And Commercial Services, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotations Are Being Requested And A Separate Written Solicitation Will Not Be Issued. This Solicitation Is Being Issued Under The Authority Of Far Part 13 Simplified Acquisition Procedures. This Combined Synopsis/solicitation Is Being Issued As A Small Business Set-aside. this Solicitation Is A Request For Quote (rfq). This Solicitation Document Incorporates Provisions And Clauses In Effect Through Federal Acquisition Circular (fac) 2025-01 Effective November 12, 2024. The Associated North American Industry Classification System (naics) Code For This Procurement Is 561730 With A Size Standard Of $9,500,000.00. the U.s. Army Corps Of Engineers, Wilmington District Is Requesting Services Brush And Tree Limb Cutting, Painting, And Signing Approximately 41 Miles Of Existing United States Government’s Property Boundary To Maintain A Highly Visible Boundary Line At B. Everett Jordan Lake. The Contractor Shall Not Be Establishing New Boundary Lines Or Conducting Any Land Survey Activities. the Resulting Award Issued From This Request Will Result In One Award. Service Contract Act Wage Determination 2015-4393 Rev 27, Dated 07-22-2024 For Wake County, Nc And 2015-4373, Rev 27, Dated 07-22-2024 For Chatham County, Nc Will Apply. The Offeror Is Responsible For Referring To The Wage Determination And Applying It As Applicable. the Following Documents Have Been Provided: a21 - Combined Synopsis-solicitation – Bej Boundary Line Maintenance – W912pm25q0006 - Final questions Are Due Not Later Than 4:00 Pm, Edt, 08 January 2025. quotes Are Due Not Later Than 2:00 Pm, Edt, 22 January 2025. submit Questions & Quotes Electronically Via Email To Both Shaun.m.mckenna@usace.army.mil And Jenifer.m.garland@usace.army.mil. It Is Your Responsibility To Follow Up And Ensure Quotes Have Been Received By The Contract Specialist Prior To The Due Date And Time For Quotes. evaluation Of Award: The Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. Issuance Of Award Will Be Made To The Lowest Price Offeror That Is Technically Acceptable. price Quote And Technical Proposal: Each Offeror Must Submit Both A Price Quote And A Technical Proposal Via Email. The Technical Proposal Shall Include The Documentation In Certification And Documented Past Experience. See Provision 52.212-2 Within The Solicitation. No Hard Copies Will Be Accepted Or Evaluated. Both The Price Quote And Technical Proposal Must Be Received By The Closing Date And Time Set Forth Within The Solicitation. In An Effort To Reduce Paper And Cost, All Quotes Shall Be Submitted Electronically. All Submissions Shall Be In Adobe Pdf Format And Shall Be On 8 ½ X 11 Size Pages In No Less Than 10 Pitch Or 10 Fonts. The Pricing Quote Can Be In Microsoft Excel Spreadsheet Format Provided Within The Solicitation. Offerors May Use Compression Utility Software Such As Winzip Or Pkzip To Reduce Fie Size And Facilitate Electronic Transmission. title File(s) In The Following Format: w912pm25q0006_company Name_pricing w912pm25q0006_company Name_technical in Accordance With Far 52.212-1(k), Each Prospective Awardee Shall Be Registered And Be Active In The Sam Database Prior To Award. If The Offeror Does Not Become Registered In The Sam Database In The Time Prescribed By The Contracting Officer (nlt Due Date/time Of Solicitation), The Contracting Officer Will Proceed To Award To The Next Otherwise Successful Registered Offeror. Offerors May Obtain Information On Registration And Annual Confirmation Requirements Via The Internet At Https://www.sam.gov Or By Calling 866-606-8220, Monday – Friday From 8am – 8pm Est. the Government Reserves The Right To Cancel This Solicitation. this Announcement And Written Request For Quote Constitutes The Only “request For Quote” That Will Be Made For This Requirement.