Paint Tenders

Details: Details Tender Number Bio012412rfq00000001 Department Agricultural Research Council Tender Type Request For Quotation Province Gauteng Date Published 28 February 2025 Closing Date 11 March 2025 16 00 Place Where Goods, Works Or Services Are Required 100 Old Southpan Road-onderstepoort-pretoria-0110 Special Conditions Compulsory Site Visit @ 06 March 2025- 10 00am Enquiries Contact Person Lebogang Thobakgale Email Manol@arc.agric.za Telephone Number 012-529-9480 Fax Number N/a Briefing Session Is There A Briefing Session? Yes Is It Compulsory? Yes Briefing Date And Time 06 March 2025 10 00 Briefing Venue Arc Biotechnology Platform 100 Soutpan Road Onderstepoort, Building 38 Tender Documents Roof Specification-final Version3.pdf Request For Quotation-bio012412rfq00000001- Roof Renovation-3 Copy.pdf Bill Of Quantities Roof Painting-btp Copy.pdf

Details: Description Procurement Of Ambulance (g-10-2024) Details: Body: Fb Accessories: Ambulance Sticker And Municipal Logo Aircon: Dual Ac Lead Engine & Engine Displacement: Diesel With A Minimum Displacement Of 2999 Cc Transmission: Manual Transmission Min Power: 124 @ 2,600rpm Min Torque: 354 @ 1,500rpm Drivetrain: Rear Wheel Drive Brakes: Disk (front); Drum, (rear) Suspension Front/rear: Multi- Leaf Spring Wheels And Tires:5 Including Spare Tire, 7.50-15-12pr Overall Length: 4,675mm Wheelbase: 2,490 Mm Gross Vehicle Weight: 4,490kg Gross Payload: 2,635kg Warranty Aluminum Van: 6 Months Against Inherent Defects Warranty Cab And Chassis: 3 Years Warranty Or First 100,000km Whichever Comes First Pms: Free Labor For The First 1,500 Km And 5,000km Except For Oil And Materials I. Vehicle Specifications And Requirements 1. Vehicle Type: Four-wheel Passenger Van With 4 Doors (2 At Tfie Front For The Driver And Passenger, One Eliding Door Or Barn Door At The Right Side And Tailgate Or Barn Door At The Rear) 2.wheelbase: At Least 2800 Mm 3.drive Type: Rear Wheel Drive 4.engine Size/displacement: 2.5 To 3.0 Liters 5. Engine Type: 4 Cylinders, In-line Type, 16 Valves, Double Over Head Cam (dohc) 6. Alternator And Battery: The Capacity Of The Alternator And Battery Must Be Sufficient To Supply The Additional Load Demands Of All Medical Equipment 7. Fuel-injector System: Direct Injection 8. Emission Compliance: Euro 4 9. Fuel Type: Diesel 10. Fuel Tank Capacity: At Least 65 Liters 11. Transmission: Manual With At Least Fis'e (5) Speed + One (1) Reverse 12. Steering: Left Hand Drive With Power-steering System 13. Brakes: Ventilated Disk On The Front And Ventilated Disk Or Drum Type On The Rear. With Anti- Lock Braking System. With Parking Brake 1 4. Front Suspensions: Mcpherson Strut Or Double Wishbone Or Torsion Bar With Stabilizer 15. Rear Suspensions: Rigid Azle With Leaf Spring And Double Acting Shock Absorbers 16. Wheels: At Least 15 Inch, Aluminum Mag Wheels Or Steel Wheels With Fult Cover 1 7. Tires: Radial Type And At Least 195 Mm Tire Width 18. Standard Vehicle Lamps: Head Lamps, Tail Lamps, Stop Lamps, Signal Lamps, License Plate Lamps, Fog Lamps And Step Lamps 19. Vehicle Body Color: White 20. Floor Material: Metal With Anti-static Floor Matting. Each Entry Point Of The Patient Compartment Must Be Fitted With A Diamond Tread Plate Flooring. 21. Standard Dashboard Instrumentations: Speedometer, Odometer, Fuel Gauge, Digital Clock, Warning Lamps For Low Oil Pressure, Cooling Water Level, Overheating, Low Battery Charge, Indicator Lamps For Parking Brake And Head Light High-beam, Engine Check, Door Open. 22. Dashboard Camera: Resolution Of At Least 1920x1080@30fps, Angle Of View At Least 120 Degrees Diagonal, At Least 2 Inch Led Display, Minimum Storage Capacity Of 64gb, With Loop Recording, Automatic On/off And Night Vision Recording In Low Light. The Camera Must Be Permanently Installed On The Dashboard Or Windshield. The Power Supply Must Be From The Vehicle Battery. 23. Standard Driver's Cabin Accessories: Am/fm Radio With Speakers, Usb Connector, Front Personal Lamp For Driver And Passenger, Rear View Mirror, Sun Visor And Assist Grips For The Driver And Passenger. 24. Vehicle Glass Widows: The Vehicle Glass Windows (except The Windshield) Must Be Installed With Medium Shade (35% Visible Light Transmitted) Glass Tint. 25. Windshield Wipers: With At Least Two (2) Speed Intermittent With Washer 26. Air Conditioning System: Dual Type; At The Driver's Cabin And At The Patient Compartment With Independent Controls. 27. Seat Belts: 3 Point Emergency Locking Retractor (elr) Seatbelts For The Driver And Front Passenger. 28. Airbags: Supplemental Restraint System (srs) Airbags For The Driver And For The Front Passenger. 29. Driver And Passenger Side Mirrors: Standard Convex Type, Manual Or Power Adjustment U 30. Vehicle Interior Trim: Moulded Trim. The Ceiling Must Be Provided With Insulation. 31. Stainless Steel Plate On The Rear Bumper To Protect The Bumper When The Ambulance Stretcher Is Being Loaded To The Ambulance. 32. Set Of Tools: Bydraulic Jack, Tire Wrench, Flat And Philips Screw Drivers, Set Of Pliers, Adjustable Wrench, Early Warning D Vice And Spere Wheel And Tire. Ii. Emergency Lights, Sirens And Public Address System 1. Emergency Lights: Roof Mounted Light Bar With Red And Green Flashing Led Lights. The Length Of The Light Bar Must Be The Same As The Width Of The Vehicle Roof. 2. Electric Siren And Public Address System: Standard Ambulance Siren Tones (horn, Manual, Wail, Yelp, Phaser, Rilo/two Tone) And With At Least Two 100 Watts Amplifier And Siren Speakers. With Rotary Switch And Momentary Push-button Override Control. Public Address Override With Attached Microphone And Volume Control Knob 3. Red And Green Flashing Led Lights Mounted On The Upper Part Of The Rear Of The Ambulance 4. Red And Green Led Trashing Lights Mounted On The Front Grill Of The Ambulance Ih. Ambulance Body Marking 1. The Front Of The Ambulance Shall Be Marked With A Reflectorized And Capitalized Word “ambulance” Which Is Spelled Out In Reverse (mirror Image). The Height Of Each Letter Shall Be No Less Than 10 Cm And The Letters Must Be In Red Color. The Word Shall Be Seen At Least Six (6) Meters Away. 2. Each Side Of The Ambulance Body Shall Have The Capitalized Word “ambulance” Not Less Than 15 Cm In Height And The Letters Must Be In Red Color. 3. The Rear Side Of The Ambulance Shall Be Marked With A Reflectorized And Capitalized Word “ambulance” Not Less Than 15 Cm In Height. The Letters Must Be In Color Red. 4. The Prescribed Doh Logo With A Diameter Of Not Less Than 36 Cm Shall Be Placed On The Driver's Door And On The Front Passenger Door. Iii. Patient Compartment 1. Compartment Interior Height: At Least L600mm 2. Compartment Interior Width: At Least L500mm 3. Partition Between The Driver And Patient Compartment: Air Tight Bulkhead Made Of Non-porous Material With A Transparent And Shatter-proof Sliding Window At Least 35 Cm X 30 Cm. 4. Storage Cabinet For Medicines, Instruments And Medical Equipment A) Built-in Cabinet Made Of White Painted Aluminium Panels Or Other Lightweight, Equivalent Strength Material Such As Fiberglass, Composites And Fiberglass Reinforced Plastics. The Cabinet Must Be Mounted On The Upper Left Side Of The Patient Compartment And Must Be At Least 200 Cci But Must Not Be More Than 210 Cm In Length. The Cabinet Must Be Firmly Anchored (bolted Or Welded) To Tapping Plates Of The Body Structure. B) The Cabinet Must Have Transparent And Shatter-proof Sliding Doors With Low Profile Handles. The Sliding Doors Must Be Easily Opened Hut Must Not Open During Transit. The Sliding Doors Must Be Fitted With Automatic Latch Or Friction Bolding Device. C) The Cabinet Must Have At Least 4 Shelves With At Least One Shelf Designed To Fit And Carry Heavy Medical Equipment Such As The Defibrillator And Nebulizer. The Shelves Must Have A Depth At Least 30 Cm But Must Not Be More Than 50 Cm. 5. Compartment For The Folding Stretcher And Scoop Stretcher: Installed Below The Storage Cabinet, Made Of White Painted Aluminum Panels Or Other Lightweight, Equivalent Strength Material Such As Fiberglass, Composites And Fiberglass Reinforced Plastics. The Compartment Must Be At Least 200 Cm But Must Not Be More Than 210 Cm In Length. The Cabinet Must Be Firmly Anchored (bolted Or Welded) To Tapping Plates Of The Bod7 "t••cture. 6. Bench For Medical Personnel: The Ambulance Must Be Fitted With 3-seater Bench Permanently Mounted On The Ambulance Floor; One On The Head Side Of The Patient And One On The Right Side Of The Patient Compartment. The Bench (seat And Backrest) Must Be Made Of Sturdy Aluminate Frame And Panels Coated With White Color Paint Or Other Lightweight, Equivalent Strength Material Such As Fiberglass Reinforced Plastics Or Plastic Laminated. The Seat And Backrest Must Be Fitted With Mattress Made Of Polyurethane Foam Covered With A Washable Leatherette Material. The Construction Of The Bench Must Be In Such A Way That The Underneath Can Be Used As A Compartment. The Bench Must Have A 2-point Seatbelt For Each Person. 7. Overhead Lighting: At Least 2 Led White Lights With Low Light Option 8.grab Rail: Aluminium Or Stainless Steel Grab Rail At Least 120 Cci Long, 10 Cm Depth (maximum) Installed On The Ceiling Right Above The Patient/ambulance Stretcher. 9. 220v Ac Supply: The Patient Compartment Must Be Installed With An Electronic Inverter With A Capacity Of At Least 2kva And An Output Voltage Of 220v, 60 Hz. At Least Five (5) Convenience Outlets Must Be Installed At The Different Points On The Compartment To Supply Power To The Medical Equipment. 10. Intercom System: Intra-vehicle Intercom System Must Be Fitted To Serve As Voice Communication Between The Driver And Personnel In The Patient Compartment. Iv. Medical Equ&ment And Instruments 1. Ambulance Stretcher 2. Automatic External Defibrillator (aed) 3. Nebulizer 4. Portable Suction Machine 5. Aneroid Sphygmomanometer 6. Examining Light 7. Folding Stretcher 8. Scoop Stretcher 9. Heavy Duty Stethoscope (1 Pediatric And 1 Adult) 10. Non-contact Thermometer 11. Blood-glucose Meter With Strip 12. Manual Resuscitators For Adult, Pediatric And Infant 13. Oxygen Cylinder With Oxygen Therapy Set 14. Laryngoscopes Set 15. Immobilization Devices 16. Delivery Set

Description: Single-award framework agreement with purchase orders relating to the supply and delivery of water-based paint for the bodywork workshops of the Equipment and Logistics Department

Description: M.s. Junk Kachra Including Rusty Corroded Small Cut Pcs Of Cond. Sheet & Support ,fire Extinguisher, Guard Broken Chair, Buckets, Liner, Fan Cover Celling Fitting Iron Canes,mesh-guard, Filter Wire-rope,rusted Wire G.i Sheet Broken Paint Solvent Container 05 Ltrs, Broken Rusted Drums 20 Drums (sort & Sizes), Rc Fan Cage,panel,heads Blades And Tube Light Fittings With Attachments Small Cut Pcs Of C & W Items Etc Us & Ur As It Is. Loc:-lying At Bg-14 In Scrap Yard Judw. Remarks:-[1] Loading By Purchaser Note:- (1). Hammering Allowed For Loading Purpose. (2). Jcb Allowed For Loading Purpose If Required 3.nfs Will Be Taken Back If Found In Lot.

Description: Scrap & Condemned Load Sensing Device Pieces Of Sorts & Sizes, Complete Or Incomplete With Or W/o Nfs Attachments,as It Is, Us & Ur. Qty = 7730 Kg Loc:-lying At Back Side Of Open Paint Godown Near Line No. 02 In Scrap Yard Judw. Remarks-loading By Purchaser.

Details: Description Project Title: Improvement Of Municipal Public Market I (phase 4) Project Location: Abatan, Buguias, Benguet Duration: 331 Cd (including Curing) Project Cost: Php 4,200,000.00 Source Of Fund: Supplemental Budget Cy 2023 Item No. Description Qty Unit B.5 Project Billboard/signboard 1.00 Each B.7 (2) Occupational Safety & Health Program 1.00 Lot I Removal Of Structures & Obstruction 1.00 Lot 803 Structure Excavation 21.56 Cu.m 902 (1) Reinforcing Steel Bar Of Reinforced Concrete Structures, Grade 40 3,841.93 Kgs 900 (1) C2 Structure Concrete For Footing And Slab On Fill (class A, 28 Days) 17.33 Cu.m 900 (1) B Structure Concrete For Column, Suspended Slab, Beam (class A, 28 Days) 18.61 Cu.m 903 (2) Forms & Falseworks 176.82 Sq.m 1046 100mm Chb Non Load Bearing/load Bearing (including Reinforcing Steel) 260.50 Sq.m 1027 (1) Cement Plaster Finish With Poro 726.69 Sq.m 1047 Structural Steel Post, Roof Framing & Accessories 1.00 Lot 1013 (1) Corrugated Metal Roofing 116.00 Sq.m 1013 Fabricated Metal Roofing Accessory 1.00 Lot 1002 Plumbing Works 1.00 Lot 1018 Ceramic Floor Tile 333.82 Sq.m 1018 (1) Ceramic Wall Tile 40.15 Sq.m 1007 Aluminum Glass Door 32.76 Sq.m 1008 Aluminum Glass Window 100.94 Sq.m 1003 (1) 6mm Fiber Cement Board On Metal Frame Ceiling 277.86 Sq.m 1001 (9) Storm Drainage & Downspout 1.00 L.s 1032 (1) A Painting Works 531.79 Sq.m

Description: Lithuania – Road-surface Painting Work – Kelių Ženklinimo Ir Saugaus Eismo Priemonių Įrengimo Darbų Centralizuotas Viešasis Pirkimas, Taikant Dinaminę Pirkimo Sistemą

Details: Description Scope Of Work: Purchase Of Construction Materials 1 Chb 4" X 8" X 16" 10,000 Pcs. 2 Portland Cement 600 Bags 3 Sand (app. Source) 60 Cu.m. 4 Crushed Stone 3/4 60 Cu.m. 5 10mm Dia. Def. Bars 500 Pcs. 6 12mm Dia. Def. Bars 300 Pcs. 7 Corr. G.i. Sht. #24- 12ft. 250 Shts. 8 Corr. G.i. Sht. #24- 10ft. 250 Shts. 9 Corr. G.i. Sht. #24- 8ft. 250 Shts. 10 Plain G.i. Sht. #24- 8ft. 60 Shts. 11 Marine Plywood 3/4 80 Shts. 12 Marine Plywood 1/4 300 Shts. 13 Tie Wire #16 50 Kls. 14 Umbrella Nails 2 1/2 50 Kls. 15 Cw Nails #4 28 Kls. 16 Cw Nails #3 28 Kls. 17 Cw Nails #2 1/2 29 Kls. 18 Latex Paint (white) 80 Gals. 19 Paint Brush #2 60 Pcs.

Description: Painting and maintenance work in the office and corridors of the National Directorate of Innovation, Science and Technology located on the ground floor of the Julio Herrera Y Reissig House, Reconquista 543.

Description: 98325061 Scrap Released Traction Motor (approx Weight 11120 Kg) 04 Nos Complete Tm Set,01 No Incomplete Tm Set ,01 Nos Stater Frame,02 Nos Rotors Of Traction Motor (total 08 Nos.)with Or Without Copper Cable,terminals And Other Ferrous Or Non-ferrous Accessories, Off Sorts And Sizes, Broken And Damaged, With Or Without Rust, Dust, Oil, Paint, Adhesives, Wet And Grease On As It Is Basis.unsuitable To Railway Use. Image Uploaded .loading By Purchaser. Custodian: Dms/nf/mx.(reform Lot No.-0902001024)