Paint Tenders

Details: Description Invitation To Bid For The Installation Of Directional Signages Leading To Tourism Sites Santa Teresita, Cagayan 1.the Local Government Unit Of Santa Teresita, Through 20% Development Fund Continuing 2025 Intends To Apply The Sum Of Five Hundred Thousand Pesos (p 500,000.00) Only Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Installation Of Directional Signages Leading To Tourism Sites. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Brief Description Of The Contract: Item No. Description Unit Qty. I Project Billboard/signboard Lot 1.00 Ii Mobilization/demobilization Lot 1.00 Iii Earthworks Cu.m 24.52 Iv Concrete Works Cu.m 5.00 Vi Formworks Sq.m 19.60 Vii Painting Works Sq.m 23.85 Vii Steel Works Lot 1.00 Ix Stickers Lot 1.00 2.the Local Government Unit Of Santa Teresita Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Sixty (60) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3.bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4.interested Bidders May Obtain Further Information From Local Government Unit Of Sta. Teresita And Inspect The Bidding Documents At The Address Given Below From 9:00 Am To 4:00 Pm From Mondays To Fridays. 5.a Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 8-16, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (p 500.00) Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6.bids Must Be Duly Received By The Bac Secretariat Through Manual Submission Or Through Courier At The Office Address Indicated Below On Or Before January 16, 2025 1:00 Pm. Late Bids Shall Not Be Accepted. 7.all Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 8.bid Opening Shall Be On January 16, 2025 1:15 Pm At The Given Address And/or Through Video Conferencing When Applicable Or As The Need Arises. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9.the Local Government Unit Of Santa Teresita Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10.for Further Information, Please Refer To: Louvette D. Madrid Head, Bac Secretariat Local Government Unit Of Santa Teresita Santa Teresita, Cagayan Email Address: Madridlouvette@gmail.com Engr. Mark Henri M. Mercado, Enp Bac Chairperson Local Government Unit Of Santa Teresita Santa Teresita, Cagayan

Details: Description Rfq No. 1239 Pr No. 3417-24bac Request For Quotation For Infrastructure Section 53.9 Negotiated Procurement - Small Value Procurement Supply And Delivery Of Labor Service And Materials For The Upgrading And Extension Of Vemi-composting Shed Of Sual, Pangasinan And Upgrading Of Vermicomposting Shed Of Baguio City Section I. Mandatory Requirements (note: Failure To Submit Any Of The Following Requirements Will Be Automatically Disqualified) A. Philgeps Registration (platinum Membership And Red Membership) Ü Mayor's / Business Permit Ü Pcab License Ü Income/business Tax Return (for Abc 500k And Above) Ü Certificate Of Bir Registration (for Abc 50k And Above) Ü Dti Registration Submit A Clear Copy Or Documentation Of The Proof Of Payment For The Renewal Of Expired Permit/s. B. Photocopy Of One (1) Company Id Or One (1) Valid Id W/ Three (3) Specimen Signature C. Notarized Original Omnibus Sworn Statement (for Abc 50k And Above) D. Certificate Of Site Inspection (duly Signed By The End-user Or Their Representative) E. The Supplier Must Not Have Any Record Of Non-compliance Over The Past Three (3) Years. Section Ii. Instructions: 1. Please Write Legibly. 2. The Bidders/suppliers Or Their Authorized Representative Shall Accomplish This Form Including Unit Price And Total Price As Well As Sub- Total And Grand Total (if Applicable) And Affix Their Signature Over Printed Name Indicated In The Lower Portion Of This Form. 3. Indicate Offered Brands And Specifications (if Applicable). 4. Quotation(s)/proposal(s) Shall Be Submitted At The Procurement Management Section (bac Office), Bureau Of Plant Industry, 692 San Andres Street, Malate, Manila Or Through Courier Or Email (pms.rfq@buplant.da.gov.ph). 5. Only Sealed Canvass Submitted In Person Or Through Courier Shall Be Considered By The Bac. The Bidders/suppliers Shall Reflect On The Envelope The Rfq Number And The Pr No. The Bac Shall Not Be Responsible On The Pre-emptive/premature Opening Of The Proposal. 6. Any Insertions, Erasures, Or Overwriting Shall Be Valid If Only They Are Signed Or Initialed By The Bidders/suppliers Or Their Authorized Representative. 7. Quotation Must Include All Kinds Of Taxes For The Item(s)/services Listed Hereunder, Including Delivery Charges. 8. Price Quotation(s) Submitted Shall Be Valid For A Period Of One Hundred Twenty (120) Days Reckoned From The Deadline For Submission Of Quotations As Reflected In This Form. 9. Awarding Shall Be Done Per Lot. 10. Deadline For Submission Of Bids: January 9, 2025 (8:15am). 11. In Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated And Responsive Quotation Or Highest Rated And Responsive Quotation For Consultancy Services, The Bpi- Bac Shall Employ The Rules Specified In The Irr Of Ra 9184. 12. Delivery/installation/completion Period: Twenty-eight (28) Calendar Days Upon Receipt Of Purchase Order (p.o.). 13. The Uniform Guidelines For Blacklisting Set Forth In Appendix 17 Of The 2016 Revised Irr Of Ra 9184 Shall Apply. 14. The Supplier/bidder/contractor Must Have No Violation With Its Transactions With The Bureau Based On Bpi Records And Bpi Memorandum Order 328 Series Of 2023. 15. The Bureau Of Plant Industry Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. "notice/announcement: Bureau Of Plant Industry Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. " Approved Budget For The Contract: Php 500,000.00 End User: Baguio Ncrdpsc Qty Unit Item/description Ceiling Price/ Offered Unit Total Per Unit(php) Brand Price Price Rm- Maintenance- Buildings And Other Structures Sual, Pangasinan 1 Lot Mobilization/ Demobilization 6,778.80 30 Sq.m. Removal Of Obstruction 26.85 4.3 Cu.m. Structural Excavation (manual) 1,166.97 8 Cu.m. Embankment (manual) 526.58 2.78 Cu.m. Concrete Works 9,354.90 40.8 Sq.m. Fabrication And Installation 429.73 35 Sq.m. Removal 80.91 104 Pcs. Chb Laying And Filling 75.11 15.84 Sq.m. Plastering 717.67 155.27 Kgs. Reinforcement Steel Bar 113.63 3.6 Cu.m. Grouted Riprap 6,222.53 27.37 Sq.m. Structural Steel Truss And Roofing 2,623.63 1 Lot Painting Works 9,878.55 1 Lot Steel Works And Other Miscellaneous Works 45,902.47 Baguio City 1 Lot Clearing 1,665.30 0.5 Cu.m. Structural Excavation (manual) 3,330.60 5.4 Cu.m. Embankment (manual) 308.39 2.97 Cu.m. Concrete Works 12,969.59 21.6 Sq.m. Fabrication And Installation 255.44 21.6 Sq.m. Removal 103.78 141 Pcs. Chb Laying And Filling 167.62 22.44 Sq.m. Plastering 1,020.12 0.81 Cu.m. Wall Footing 21,128.59 240.5 Kgs. Reinforcement Steel Bar 184.43 1 Lot Painting Works 16,909.20 1 Lot Door 18,236.32 30.24 Sq.m. Steel Works And Other Miscellaneous Works 1,838.13 Grand Total 500,000.00 Philgeps Posted William F. Mugot Bac Chairman Canvasser The Bpi-bids And Awards Committee (bac) 692 San Andres, Malate Manila In Connection With The Above Request, I/we Submit Our Quotation Indicated Above. I/we Have Carefully Read And Fully Understand The Minimum Requirements And Agree To Furnish And/ Or Deliver The Above Mentioned Requirement(s) In Conformity With The Specifications/terms Or Reference/scope Of Work Indicated/attached Thereto. ________________________________________ ________________________________________ ________________________________________ Signature Over Printed Name Company Name Of Bidder Philgeps Registration Number ________________________________________ ________________________________________ ________________________________________ Contact Number(s) Office Address Email Address Of The Bidder ________________________________________ ________________________________________ Tax Identification Number (tin) Date Accomplished Payment Shall Be Made Through Land Bank's Lddap-ada/bank Transfer; Bank Transfer Fee Shall Be Charged Against The Creditor's Account. Payment Details: Banking Institution: ________________________________________________ Account Number:___________________________________________________ Account Name:______________________________________________________ Branch:_______________________________________________________________

Details: Description Invitation To Bid For Improvement Of Guardhouse At Magsiko Peak, Atotes The Municipality Of Bindoy, Through The Mun. Supplemental Budget Cy 2024 20% Df Intends To Apply The Sum Of Six Hundred Seventen Thousand Five Hundred Thirty-two & 50/100 Pesos (p 617,532.50) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Improvement Of Guardhouse At Magsiko Peak, Atotes, Bindoy, Negros Oriental. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Municipality Of Bindoy Through Its Bids And Awards Committee (bac), Now Invites Bids From Eligible Bidders To Enter Into Contract Based On Award For The Purchase Of Construction Materials On Dec. 26, 2024 - Jan. 20, 2025. Stock No. Items/description Qty Unit 1 Portland Cement Portland Cement Sand Gravel Fine Gravel G.i. Tie Wire #16 16mm Dia. X 6.0m Rebars 12mm Dia. X 6.0m Rebars 10mm Dia. X 6.0m Rebars ¼” Marine Plywood 2”x2”x12’ Coco Lumber (300 Pcs) 2”x3”x12’ Coco Lumber (240 Pcs) 2”x4”x12’ Coco Lumber (240 Pcs) 4” Cw Nails 3” Cw Nails 2-1/2” Cw Nails 1-1/2” Cw Nails Zinc Chromate & Phosphate Epoxy Primer Lacquer Thinner Paint Brush, 1” 145 Bags 2 Sand 13 Cu.m. 3 4” G.i. Pipe X 6.0 Mtr Schedule 20 3 Pcs 4 Hi-rib 0.50mm X 1.090m X 6.30m 6 Pcs 5 Tile Roof 0.50mm X 1.090m X 3.15m 56.70 I.m 6 Tile Roof 0.50mm X 1.090m X 2.15m 6.45 I.m 7 End Flashing 0.50mm X 2.4m 11 I.m 8 6” X 6.0m C-purlins 9 Lgths 9 1.2mm X 3” X 4” X 8ft Rectangular Tube 27 Lgths 10 1.2mm X 2.5” X 2.5” X 8ft Square Tube 27 Lgths 11 Welding Rod 15 Kgs 12 Wire Screen 1 Rolls 13 16mm Dia. X 6.0m Rebars 5 Lgths 14 15 12mm Dia. X 6.0m Rebars 30 Lgths 15 10mm Dia. X 6.0m Rebars 10 Lgths 16 G.i Tie Wire #16 3 Kgs 17 Expansion Bolt 5/8 40 Pcs 18 Tekscrew 2.5” 250 Pcs 19 (0.90m X 2.10m X 1/2 Inch Thk) Single Panel Swing Door With Aluminum Tube Jam And Accessories 2 Units 20 (0.90m X 1.0m X 1/2 Inch Thk) Fixed Glass Header With Aluminum Tube Jam And Accesories 2 Units 21 (0.60m X 2.1m X 1/2 Inch Thk) Fixed Wall Glass With Rectangular Aluminum Tube Jam And Accessories 6 Unit 22 (0.60m X 1.0m X 1/2 Inch Thk) Fixed Glass Header With Rectangular Aluminum Tube Jam And Accessories 6 Unit 23 (1.0m X 2.1m X 1/2 Inch Thk) Fixed Wall Glass With Rectangular Aluminum Tube Jam And Accessories 3 Unit 24 (1.0m X 1.0m X 1/2 Inch Thk) Fixed Glass Header With Rectangular Aluminum Tube Jam And Accessories 3 Unit 25 (1.5m X 2.1m X 1/2 Inch Thk) Partition Sliding Glass With Aluminum Tube Jam And Accessories 4 Unit 26 (1.50m X 1.0m X 1/2 Inch Thk) Fixed Glass Header With Rectangular Aluminum Tube Jam And Accessories 4 Unit 27 Fiber Cement Board (hardiflex) 19 Shts 28 Angular Wall (2.4m/length) 20 Lgths Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On Dec. 26, 2024 - Jan. 20, 2025 From The Bac Secretariat Upon Payment Of The Applicable Fee For The Bidding Documents, Of One Thousand Pesos Only (p 1,000.00). Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before Dec. 26, 2024 - Jan. 20, 2025 At 1:30pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On January 20, 2025 At 2:00pm At The Office Of The Municipal Planning And Development Officer. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. The Municipality Of Bindoy Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Roberto L. Amaro Bac Chairman Office Of The Municipal Planning And Development Officer Poblacion, Bindoy, Negros Oriental Mobile Contact Nos. 09274958041

Details: Description Invitation To Bid For The Procurement Of 2 Units Recirculating Dryer (6 Tonner) Under Corn Program Fy 2025 1. The Department Of Agriculture Regional Field Office Iva Through The Corn Program Intends To Apply The Sum Of Seven Million Two Hundred Thousand Pesos (ᵽ 7,200,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of 2 Units Recirculating Dryer (6 Tonner) Under Corn Program Fy 2025 With Project Identification No.: Itb-2025-12-061. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. 2 Units Recirculating Dryer (6 Tonner) I. Design And Performance Type: Batch Type, Recirculating, Stationary Capacity: 4 To 6 Mt Drying Rate: 2% Per Hour, Minimum (batch Type) Drying Efficiency: Minimum, 75% Moisture Gradient: Maximum, 2% Drying Loss/spillage: 1% Maximum Product Quality: A. Cracked Grain, % Increase: 10%, Maximum B. Broken/split Kernels, % Increase: 7%, Maximum C. Hulled/damaged Grain, % Increase, 2% Maximum With Programmable In-line Monitoring System For Moisture Content, Temperature And Can Control Heating System And Shutdown The Drying Operation When The Grain Is Already Dried. Material Of Construction: Parts Of The Dryer With Direct Contact With The Grains Shall Be Made By Non-corrosive And Food Grade Material Eg. Stainless Steel 304. Power Requirement: Single-phase Electrical Connection, Maximum 5 Kw Rated Power Of All Electric Motors Ii. Heating System Requirement 1. Heating System 1 (petroleum Based Fuel) Petroleum Based Fuel: Direct-fired Heating System Efficiency: 90%, Minimum With The Following Components And Accessories: - Flame Sensor - Electronic Ignition System - Automatic Fuel Shut-off - Adjustable Fuel Vaporizer - Automatic Temperature Control - Elevated Non-corrosive And Heat Resistant Fuel Container At Least 200 Liters Capacity - Compatible Single-phase Electric Motor For The Heating System 2. Heating System 2 (biomass Fuel) Biomass Fuel: Indirect-fired Heating System Efficiency: 50%, Minimum With The Following Components And Accessories: - Heat Exchanger: Stainless (ss 201/ss 304, 1.2mm, Minimum) / Fire Tubes (5mm Seamless, Minimum) - Burning Chamber: Made Of Refractory Bricks - Automatic Fuel Feeder: Auger Type - Temperature Control - Compatible Electric Motor For The Heating System Iii. Other Dryer Components And Accessories 1. Pre-cleaner Input Capacity: 4-6 Ton/hr, Minimum Sieve Mechanism: All Parts That Come In Contact With Grain Must Be Made By Non-corrosive And Food Grade Material Eg. Stainless Steel 304. Capable Of Removing Large Impurities And Unthreshed Paddy With Compatible Electric Motor" 2. Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2, Made Of Stainless Steel Or Primer Painted And Powder Coated B.i. Or G.i. Sheet. Insulator Material For The Ducting Shall Be Made Of Ceramic Blanket. 3. Dust Collection System Consists Of Cyclone Separator / Collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 4. Generator Set Rated Power/kva: Minimum 15 Kva Voltage Requirement Compatible To The System Power Supply / Generating System Should Be Brand New And Not Refurbished. At Least Three (3) Years From The Date Of Manufacture To The Date Of Opening Of Bids And With Engrave Serial Number. Provided With Mechanical Transfer Switch (mts) The Electrical Wire, Wire Accessories And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel / System Shall Be Provided By The Bidder With Thermal Insulation And Noise Suppressor. Noise Level: 92db Maximum, If Exceeded, Earmuffs Shall Be Provided For Each Unit. With Protection Or Covering Against Rat Entry (as Per Manufacturer’s Specification) 5. Portable Handheld Moisture Meter Grain: Applicable To Corn Kernel, Paddy/rough Rice And Milled Rice Type: Capacitance Moisture Range: 12-15% Or Wider Accuracy: ±0.5% Or Better Lcd/led Display Battery Operated With Product Brochure Written In English 6. Standard Heavy-duty Tools, Made Of Tempered Steel And Chrome Vanadium Shall Include But Not Limited To The Following: - One Set Socket Wrench (no. 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 24, 27, 30, 32, Minimum) - One Set Combination Wrench (open And Box, 10pcs - Size Appropriate To The Drying System) - Electrical Plier: 200mm, Minimum - Screw Driver,: Philips And Flat Head, 300mm Minimum - Grease Gun: 250mm Cylinder Length, Minimum - Mechanical Pliers: 200mm, Minimum - Heavy Duty Toolbox And Roll Up Tools Holder (can Accommodate All Tools) 7. Air Compressor For Cleaning, Heavy Duty, At Least 120 Psi, 5m Air Hose 8. One (1) Unit Fire Extinguisher, Dry Chemical, Stored Pressure Type, 6 Kg Minimum 9. Provision Of Disposal Cart For The Ashes 10. With Portable, Heavy-duty Weighing Scale, Minimum 150 Kg Weighing Capacity 11. With Collapsible Cover (trapal), Thickness: S200 12. With Bagging Bin With Minimum Capacity Appropriate To The System 13. Non-stainless Material Of The Dryer Shall Be Painted Finish With Rust-proofing Primer And Final Paint Color. Iv. Other Requirements 1. Certification That The Bidder Will Submit A Duly Signed Electrical Plan Of The Drying System Offered (electrical Layout, Schedule Of Loads, General Notes And Specification, And Legends/symbols) By A Registered Professional Engineer As A Condition For Payment 2. Copy Of Equipment Manufacturer Manual Of Drying Unit, Biomass Furnace, Generator Set And Portable Handheld Moisture Meter Written In English/filipino/vernacular To Be Presented During Post-qualification Evaluation 3. Copy Of The Brochures For The Drying Unit, Generator Set, Weighing Scale, Portable Handheld Moisture Meter And Air Compressor Are To Be Presented During The Post-qualification Evaluation. 4. With Laminated Reflectorized Vinyl Sticker "da-calabarzon" Logo (254 Mm X 254mm) For The Prescribed Part Of The Dryer And Generator Set, Sticker Specifications: 140 Gsm And Thickness Of 175 Microns, Minimum 5. Manufacturer's Nameplate (engraved In A Metal Sheet) With The Serial Number Of The Machine And Serial Number Of The Power Generating Unit 6. With Valid Amtec Test Result That Conforms To The Pns-paes 201:2015-agricultural Machinery-heated-air Mechanical Dryer-specifications. Separate Amtec Test Report For Both Heating Systems Should Be Provided. 7. Conduct Of Acceptance Testing Of All Units After Complete Installation Is Required Prior To Acceptance And 100% Payment Of The Winning Bidder. 8. Certification From The Bidder That They Shall Provide All Fuel, Raw Materials (corn Kernels) And Technician/operator Needed During Acceptance Testing. 9. Certification From The Bidder That The Offered Unit Is Brand New, Latest Model And Not Rebranded 10. Conformity As To The Technical Specifications Of The Procuring Entity Signed And Sealed By An Agricultural And Biosystems Engineer As Prescribed By The Section 27.1 Of The Ra 10915 11. With National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Certificate Of Accreditation 12. With Permit To Operate And Certificate Of Conformity Issued By Da-bafe As Per Memorandum Circular No. 30 Series Of 2020 13. Provision Of After Sales Services: •with One Year Warranty For Major Parts And Service From The Date Of Acceptance Of The Beneficiary •valid Certificate Of Dealership / Distributorship / Authority To Sell And Commitment To Supply Directly Issued By The Dryer Manufacturer Or Distributor To The Bidder •certification From The Supplier That They Will Repair Or Replace The Defective Parts Or Components And Provide After-sales Service Within 72 Hours (3 Days) Upon Receipt Of Complaints (pns/bafs/paes 192:2024) •certification That The Bidder Will Provide Training On The Proper Handling, Operation And Maintenance Of The Dryer And Generator Set For At Least Two (2) Operators Per Beneficiary. 14. Notarized Certificate Of Stock Availability Or Stock Allocation From The National Distributor Or Manufacturer Specifying The Name Of The Project 15. Certification Of Guaranteed Spare Parts Availability For At Least Five (5) Years 16. With Certification Of Very Satisfactory Performance Of The Supplier From At Least Three (3) Clients, With Full Address And Telephone Numbers, Within The Last Two (2) Years. V. Terms Of Payment 85 % Upon Complete Installation And 15% Upon Testing/commissioning And Acceptance Of Recipient Vi. Contract Duration And Delivery Place: Days To Complete Supply, Delivery, Installation And Testing: 60 Calendar Days Delivery Place: Batangas And Quezon Delivery Of The Goods Is Required Within Sixty (60) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos (ᵽ10,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On December 26, 2024 01:10 Pm (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before January 7, 2025 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 01:10 Pm (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: December 17, 2024 ______________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee

Details: Description Invitation To Bid For The Procurement Of 4 Units Recirculating Dryer Under Rice Program Fy 2025 1. The Department Of Agriculture Regional Field Office Iva Through The Rice Program Intends To Apply The Sum Of Fourteen Million Four Hundred Thousand Pesos (ᵽ 14,400,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of 4 Units Recirculating Dryer Under Rice Program Fy 2025 With Project Identification No.: Itb-2025-12-057. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. 4 Units Recirculating Dryer I. Design And Performance Type: Batch Type, Recirculating, Stationary Drying Rate: 0.8% Per Hour, Minimum (batch Type) Drying Efficiency: Minimum, 75% Moisture Gradient: Maximum, 2% Drying Loss/spillage: 1% Maximum Product Quality: A. Cracked Grain, % Increase: 3% Maximum B. Head Rice, % Decrease: 5% Maximum C. Hulled/damaged Grain, % Increase: 2% Maximum With Programmable In-line Monitoring System For Moisture Content, Temperature And Can Control Heating System And Shutdown The Drying Operation When The Grain Is Already Dried. Material Of Construction: Parts Of The Dryer With Direct Contact With The Grains Shall Be Made By Non-corrosive And Food Grade Material Eg. Stainless Steel 304. Power Requirement: Single-phase Electrical Connection, Maximum Of 5kw Rated Power Of All Electric Motors Provision Of Built-in Automatic Moisture Meter Ii. Heating System Requirement 1. Heating System 1 (petroleum Based Fuel) Petroleum Based Fuel: Direct-fired Heating System Efficiency: 90%, Minimum With The Following Components And Accessories: - Flame Sensor - Electronic Ignition System - Automatic Fuel Shut-off - Adjustable Fuel Vaporizer - Automatic Temperature Control - Elevated Non-corrosive And Heat-resistant Fuel Container At Least 200 Liters Capacity - Compatible Single-phase Electric Motor For The Heating System 2. Heating System 2 (biomass Fuel) Biomass Fuel: Indirect-fired Heating System Efficiency: 50%, Minimum With The Following Components And Accessories: - Heat Exchanger: Stainless (ss 201/ss 304, 1.2mm, Minimum) / Fire Tubes (5mm Seamless, Minimum) - Burning Chamber: Made Of Refractory Bricks - Automatic Fuel Feeder: Auger Type - Temperature Control - Compatible Electric Motor For The Heating System Iii. Other Dryer Components And Accessories 1. Pre-cleaner Input Capacity: 4-6 Ton/hr, Minimum Sieve Mechanism: All Parts That Come In Contact With Grain Must Be Made Of Non-corrosive And Food Grade Material Eg., Stainless Steel 304 Capable Of Removing Large Impurities And Unthreshed Paddy With Compatible Electric Motor" 2. Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2, Made Of Stainless Steel Or Primer Painted And Powder Coated B.i. Or G.i. Sheet. Insulator Material For The Ducting Shall Be Made If Ceramic Blanket. 3. Dust Collection System Consists Of Cyclone Separator / Collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 4. Generator Set Rated Power/kva: Minimum 15 Kva Voltage Requirement Compatible To The System Power Supply / Generating System Should Be Brand New And Not Refurbished. At Least Three (3) Years From The Date Of Manufacture To The Date Of Opening Of Bids And With Engrave Serial Number. Provided With Mechanical Transfer Switch (mts) The Electrical Wire, Wire Accessories And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel / System Shall Be Provided By The Bidder With Thermal Insulation And Noise Suppressor. Noise Level: 92db Maximum, If Exceeded, Earmuffs Shall Be Provided For Each Unit. With Protection Or Covering Against Rat Entry (as Per Manufacturer’s Specification) 5. Portable Handheld Moisture Meter Grain: Applicable To Paddy/rough Rice And Milled Rice Type: Capacitance Moisture Range: 12-15% Or Wider Accuracy: ±0.5% Or Better Lcd/led Display Battery Operated With Product Brochure Written In English 6. Standard Heavy-duty Tools, Made Of Tempered Steel And Chrome Vanadium Which Shall Include But Not Limited To The Following: - One Set Socket Wrench (no. 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 24, 27, 30, 32, Minimum) - One Set Combination Wrench (open And Box, 10pcs - Size Appropriate To The Drying System) - Electrical Plier: 200mm, Minimum - Screw Driver,: Philips And Flat Head, 300mm Minimum - Grease Gun: 250mm Cylinder Length, Minimum - Mechanical Pliers: 200mm, Minimum - Heavy Duty Toolbox And Roll Up Tools Holder (can Accommodate All Tools) 7. Air Compressor For Cleaning, Heavy Duty, At Least 120 Psi, 5m Air Hose 8. One (1) Unit Fire Extinguisher, Dry Chemical, Stored Pressure Type, 6 Kg Minimum 9. Provision Of Disposal Cart For The Ashes 10. With Portable, Heavy-duty Weighing Scale, Minimum 150 Kg Weighing Capacity 11. With Collapsible Cover (trapal), Thickness: S200 12. With Bagging Bin With Minimum Capacity Appropriate To The System 13. Non-stainless Material Of The Dryer Shall Be Painted Finish With Rust-proofing Primer And Final Paint Color. Iv. Other Requirements 1. Certification That The Bidder Will Submit A Duly Signed Electrical Plan Of The Drying System Offered (electrical Layout, Schedule Of Loads, General Notes And Specification, And Legends/symbols) By A Registered Professional Engineer As A Condition For Payment 2. Copy Of Equipment Manufacturer Manual Of Drying Unit, Biomass Furnace, Generator Set And Portable Handheld Moisture Meter Written In English/filipino/vernacular To Be Presented During Post-qualification Evaluation 3. Copy Of The Brochures For The Drying Unit, Generator Set, Weighing Scale, Portable Handheld Moisture Meter And Air Compressor Are To Be Presented During The Post-qualification Evaluation. 4. With Laminated Reflectorized Vinyl Sticker "da-calabarzon" Logo (254 Mm X 254mm) For The Prescribed Part Of The Dryer And Generator Set, Sticker Specifications: 140 Gsm And Thickness Of 175 Microns, Minimum 5. Manufacturer's Nameplate (engraved In A Metal Sheet) With The Serial Number Of The Machine And Serial Number Of The Power Generating Unit 6. With Valid Amtec Test Result That Conforms To The Pns-paes 201:2015-agricultural Machinery-heated-air Mechanical Dryer-specifications. Separate Amtec Test Report For Both Heating Systems Should Be Provided. 7. Conduct Of Acceptance Testing Of All Units After Complete Installation Is Required Prior To Acceptance And 100% Payment Of The Winning Bidder. 8. Certification From The Bidder That They Shall Provide All Fuel, Raw Materials (palay) And Technician/operator Needed During Acceptance Testing. 9. Certification From The Bidder That The Offered Unit Is Brand New, Latest Model And Not Rebranded 10. Conformity As To The Technical Specifications Of The Procuring Entity Signed And Sealed By An Agricultural And Biosystems Engineer As Prescribed By The Section 27.1 Of The Ra 10915 11. With National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers Accreditation And Classification (namdac) Certificate Of Accreditation 12. With Permit To Operate And Certificate Of Conformity Issued By Da-bafe As Per Memorandum Circular No. 30 Series Of 2020 13. Provision Of After Sales Services: •with One Year Warranty For Major Parts And Service From The Date Of Acceptance Of The Beneficiary •valid Certificate Of Dealership / Distributorship / Authority To Sell And Commitment To Supply Directly Issued By The Dryer Manufacturer Or Distributor To The Bidder •certification From The Supplier That They Will Repair Or Replace The Defective Parts Or Components And Provide After-sales Service Within 72 Hours (3 Days) Upon Receipt Of Complaints (pns/bafs/paes 192:2024) •certification That The Bidder Will Provide Training On The Proper Handling, Operation And Maintenance Of The Dryer And Generator Set For At Least Two (2) Operators Per Beneficiary. 14. Notarized Certificate Of Stock Availability Or Stock Allocation From The National Distributor Or Manufacturer Specifying The Name Of The Project 15. Certification Of Guaranteed Spare Parts Availability For At Least Five (5) Years 16. With Certification Of Very Satisfactory Performance Of The Supplier From At Least Three (3) Clients, With Full Address And Telephone Numbers, Within The Last Two (2) Years. V. Terms Of Payment 85 % Upon Complete Installation And 15% Upon Testing/commissioning And Acceptance Of Recipient Vi. Contract Duration And Delivery Place: Days To Complete Supply, Delivery, Installation And Testing: 120 Calendar Days Delivery Place: Laguna, Rizal And Quezon Delivery Of The Goods Is Required Of 120 Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). I. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Ii. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Iii. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos (ᵽ 25,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On December 26, 2024 10:40 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before January 7, 2025, 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025, 10:40 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: December 17, 2024 _____________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee

Details: Description Item No. Unit Item Description Quantity 1 Pcs Albatros 29 2 Gal Alcohol 68%-72% 1 Gallon 5 3 Bottle Alcohol 68%-72% 500ml 3 4 Pcs Air Freshener Spray 13 5 Bottle Bleach 1l 33 6 Pcs Arch File 3 Inch Long 7 7 Pcs Ballpen (black) 691 8 Pcs Ballpen (blue) 167 9 Pcs Ballpen (red) 38 10 Pcs Ballpen (green) 3 11 Pack Battery Aa 4pcs/pack 34 12 Pack Battery Aaa 4pcs/pack 20 13 Pcs Big Stapler (heavy Duty) 6 14 Box Spring Clip 2inch 6 15 Pcs Binder Spring 2 Inches 15 16 Pcs Binder Spring 1.5 Inches 9 17 Pcs Binder Spring 1 Inch 9 18 Ream Binder Clips 19mm Box 11 19 Pcs Binder Clips 25mm Box 10 20 Pcs Binder Clips 32mm Box 10 21 Pcs Binder Clips 42mm Box 17 22 Box Bond Paper (a4) 214 23 Box Bond Paper (long) 205 24 Box Bond Paper (short) 133 25 Box Bond Paper (legal) 8.5x14 19 26 Ream Bond Paper (a3) 6 27 Ream Box Filer 20 28 Ream Broom 23 29 Pcs Broomstick 15 30 Pcs Broom And Dust Pan Set 4 31 Bottle Brother Black Btd60 8 32 Bottle Brother Cyan Bt5000 7 33 Bottle Brother Magenta Bt5000 10 34 Bottle Brother Yellow Bt5000 7 35 Bottle Brother T700w (black) 2 36 Bottle Brother T700w (yellow) 1 37 Bottle Brother T700w (cyan) 1 38 Bottle Brother T700w (magenta) 1 39 Bottle Brother D60 (black) 5 40 Bottle Brother 5000 (yellow) 2 41 Bottle Brother 5000 (magenta) 2 42 Bottle Brother 5000 (cyan) 2 43 Pack Carbon Paper (permafilm) 10’s 3 44 Set Cartolina (assorted) 10pcs/set 2 45 Pcs Calculator 14 46 Pcs Cleaner, Toilet And Urinal 12 47 Pcs Combo Strip 1 Inch 40 48 Pcs Combo Strips 1.5 Inches 25 49 Pcs Combo Strips 2 Inches 13 50 Set Plastic Rings Comb (8mm) 100’s 41 51 Set Plastic Rings Comb (10mm) 100’s 41 52 Set Plastic Rings Comb (12mm) 100’s 41 53 Set Plastic Rings Comb (14mm) 100’s 41 54 Set Plastic Rings Comb (16mm) 100’s 1 55 Pcs Computer Mouse Wireless 8 56 Pcs Computer Mouse With Wire 2 57 Pcs Computer Keyboard (usb) 5 58 Box Continuous Paper 11x14 Box 2 Ply 2 59 Box Continuous Paper 9 ¾ X 11 ¾ 4 60 Pcs Correction Pen 22 61 Pcs Correction Tape 97 62 Pcs Correction Fluid (brush Type) 63 Pcs Cutter Heavy Duty 3 64 Pcs Desk Organizer 10 65 Pcs Document Tray 2 Tiers 8 66 Pcs Document Tray 3 Tiers 8 67 Pcs Documents Storage Box (large) 10 68 Pcs Duct Tape 15 69 Pcs Dust Pan 15 70 Pack Electrical Tape (big) 24 71 Pcs Engineering Field Book 10 72 Bottle Epson Black T001 15 73 Bottle Epson Cyan T001 12 74 Bottle Epson Magenta T001 12 75 Bottle Epson Yellow T001 12 76 Bottle Epson Black T003 89 77 Bottle Epson Cyan T003 51 78 Bottle Epson Magenta T003 53 79 Bottle Epson Yellow T003 65 80 Bottle Epson Black 664 16 81 Bottle Epson Cyan 664 8 82 Bottle Epson Yellow 664 10 83 Bottle Epson Magenta 664 10 84 Bottle Epson Black 008 2 85 Bottle Epson Cyan 008 2 86 Bottle Epson Yellow 008 2 87 Pcs Envelope Brown Long 113 88 Pcs Envelope Brown Short 146 89 Pcs Envelope Orange 15 90 Pcs Envelope Transparent 15 91 Pcs Envelope White Mailing (long) 984 92 Pcs Expanded Envelope Long 167 93 Pcs Envelope With Handle And Lock Long Plastic 6 94 Pcs External Drive (ssd) 1tb 8 95 Boxes Face Mask 3 96 Pcs Feather Duster 7 97 Pcs Flourescent Tube Light Bulb 3 98 Pcs Brown Folder (long) 307 99 Pcs Brown Folder ( Short) 164 100 Pcs White Folder (long) 455 101 Pcs White Folder (short) 202 102 Pcs Expanded (long) 30 103 Dozen Fabric Conditioner (sachet) 70 104 Pcs Garbage Bin/trash Can 11 105 Packs Garbage Bag (m) 27 106 Packs Garbage Bag (xl) 38 107 Pcs Glue All Purpose 32 108 Pcs Highlighter Pen Blue 9 109 Pcs Highlighter Pen Orange 12 110 Pcs Highlighter Pen Pink 16 111 Pcs Highlighter Pen Violet 5 112 Pcs Highlighter Pen Yellow-green 47 113 Bottle Hp Ink Cartridge 690 (tricolor) 1 114 Bottle Hp Ink Cartridge 680 (black) 1 115 Ream Index Card (5x8) 25 116 Pcs Insecticide 2 117 Rolls Laminating Film 1 118 Pack Laminating Sheets (a4 Size) 3 119 Pcs Led Bulb 10 Watts 39 120 Pcs Led Bulb 15 Watts 17 121 Pcs Long Plastic Envelope With Handle And Lock 15 122 Gal Disinfectant 4 123 Bottle Disinfectant Spray 510g 9 124 Pcs Manila Paper 76 125 Pcs Micro Sd Card 128gb 3 126 Pcs Notebook (regular) 45 127 Ream Paper Payroll A3 2 128 Box Paper Clips (big) 30 129 Box Paper Clips (small) 59 130 Box Plastic Paper Fastener (long) 10 131 Box Plastic Paper Fastener (short) 22 132 Pcs Paper Cutter (b3) 1 133 Pcs Plastic Ring Comb 3 134 Ream Pvc Cover A4 5 135 Ream Pvc Cover Long 3 136 Ream Pvc Cover Short 1 137 Pcs Pen Holder 7 138 Pcs Pencil Lead With Eraser 125 139 Pcs Permanent Marker Fine (black) 61 140 Pcs Permanent Marker Fine (blue) 20 141 Pcs Permanent Marker Fine (red) 4 142 Pcs Permanent Marker Broad (black) 38 143 Pcs Whiteboard Marker (black) 42 144 Pcs Whiteboard Marker (blue) 7 145 Pcs Permanent Marker Refill Ink 2 146 Pcs Whiteboard Marker Refill Ink 2 147 Packs Photo Paper Long 12 148 Packs Photo Paper A4 7 149 Packs Plastic Key Tags 20 150 Pcs Puncher 14 151 Box Push Pin 19 152 Pcs Rain Coat 27 153 Pcs Rain Boots 1 154 Pcs Record Book 200 Leaves 35 155 Pcs Record Book 300 Leaves 11 156 Pcs Record Book 500 Leaves Medium 33 157 Pcs Record Book 500 Leaves Wide 25 158 Box Rubber Bond (big) 5 159 Pcs Rugs 32 160 Set Ruler (transparent) 12pcs/set 11 161 Pack Scissors 8” 33 162 Pcs Scissors Big 6 163 Pcs Sign Pen (black) 178 164 Pcs Pencil Sharpener 9 165 Pcs Pencil Sharpener Mounted 11 166 Sachet Detergent Powder 48 167 Pcs Detergent Bar 33 168 Pcs Dishwashing Soap 7 169 Pcs Dishwashing Paste 40 170 Pcs Dishwashing Liquid 2 171 Pcs Soap Hand (bar) Big 25 172 Pcs Soap Hand (bar) Regular 4 173 Pcs Soap Hand (bar) Small 12 174 Bottle Hand Washing Liquid 18 175 Packs Special Paper A4 120 Gsm 48 176 Packs Special Paper Long 120 Gsm 48 177 Packs Special Paper A4 200 Gsm 20 178 Packs Special Paper Short 200 Gsm 10 179 Packs Special Paper Long 200 Gsm 33 180 Pcs Stamp Pad No. 2 10 181 Pcs Stamp Pad Ink (violet) 7 182 Pcs Stamp Pad Ink ( Black) 1 183 Pcs Stamp Pad Ink (blue) 5 184 Pcs Staedtler Eraser 2 185 Pcs Stamp (received) 3 186 Pcs Stapler With Remover 20 187 Box Staple Wire #35 38 188 Box Staple Wire #35 Copper 33 189 Box Staple Remover (pinch Claw) 23 190 Pcs Staple Gun Tacker 2 191 Pcs Staple Gun Tucker Wire 3 192 Packs Sticker Paper Long 100s 29 193 Packs Sticker Paper Long 100s 29 194 Packs Sticky Notes 3x3 31 195 Packs Sticky Notes 3x2 26 196 Pcs Sticky Notes 3x4 25 197 Pcs Scotch Tape 1 Inch 65 198 Pcs Scotch Tape 2 Inch 19 199 Pcs Masking Tape 24mm 32 200 Pcs Masking Tape 48mm 47 201 Pcs Double Sided Tape 1” 38 202 Pcs Packaging Tape 48mm 24 203 Rolls Steel (10 Mtrs) 2 204 Box Tissue Paper 66 205 Pcs Facial Tissue 13 206 Pcs Table Name Plates 11 207 Pack Tape Dispenser 7 208 Pcs Transparent Index Tab 2 209 Pcs Tornado Mop (360) 15 210 Pcs Usb Flash Drive (32gb) 5 211 Pcs Usb Flash Drive (16gb) 3 212 Pcs Whiteboard Eraser 3 213 Pcs Wifi Adapter 3 214 Pcs Window Glass Cleaner 10 215 Pcs Glass Cleaner Spray 3 216 Pcs Wireless Keyboard And Mouse 3 217 Pcs Yellow Paper 15 218 Pcs Long Expanded Plastic Envelope 12 219 Pcs Pail (big) 3 220 Pcs Dipper (big) 4 221 Pcs White Board 1 222 Pcs External Drive (ssd) 2tb 1 223 Pcs Ups 2 224 Pcs Computer Mouse Usb W/ Wire 1 225 Pcs Pen Organizer 2 226 Pcs Steel Grinding Disc 4” 4 227 Kl Cwn 3” 5 228 Kl Cwn 4” 5 229 Kl Tie Wire 6 230 Gal Enamel Paint (black) 2 231 Gal Red Lead 2 232 Pcs Paint Brush 2” 5 233 Pcs Cutting Disc 6 234 Set Welding Gloves 1 235 Box Welding Rod 6011 1 236 Set Safety Gloves 15 237 Pcs Mop 8 238 Unit Comb Binding Machine 1 239 Pcs Drum Kit Mb760/mb770 2 240 Pcs Cover Pan With Broom 1 241 Pcs Date Stamp Received 1

Description: Pla Survey Identification Number: W9128f25sm017 the Corps Of Engineers Omaha District Is Soliciting Comments From The Construction Community Addressing The Potential Use Of Project Labor Agreements (pla) For Large Scale Construction Projects (exceeding $35 Million) Within Ellsworth Air Force Base (rapid City), South Dakota Area. pla Survey Responses Are To Be Sent Via Email To James.r.willett@usace.army.mil And Courtesy Copy Brittany.c.gull@usace.army.mil No Later Than 2:00 P.m. Cst, 28 January 2025. Ensure Your Response Is Limited To 5 Pages And The Subject Line Of Your Response Includes “pla Survey – Fy26 Eafb B-21 Alert Facility” And The Pla Id Number: W9128f25sm017. Please Provide Your Contact Information In The Body Of The Email. a Pla Is Defined As A Pre-hire Collective Bargaining Agreement Between A Prime Contractor And One Or More Labor Organizations That Establishes The Terms And Conditions Of Employment For A Specific Construction Project And Is An Agreement Described In 29 U.s. C. 158(f). federal Acquisition Regulation (far 22.503) Policy Provides That: (a) Executive Order (e.o.) 14063, Use Of Project Labor Agreements For Federal Construction Projects, Requires Agencies To Use Project Labor Agreements In Large-scale Construction Projects To Promote Economy And Efficiency In The Administration And Completion Of Federal Construction Projects. (b) When Awarding A Contract In Connection With A Large-scale Construction Project (see 22.502), Agencies Shall Require Use Of Project Labor Agreements For Contractors And Subcontractors Engaged In Construction On The Project, Unless An Exception At 22.504(d) Applies. (c) An Agency May Require The Use Of A Project Labor Agreement On Projects Where The Total Cost To The Federal Government Is Less Than That For A Large-scale Construction Project, If Appropriate. (1) An Agency May, If Appropriate, Require That Every Contractor And Subcontractor Engaged In Construction On The Project Agree, For That Project, To Negotiate Or Become A Party To A Project Labor Agreement With One Or More Labor Organizations If The Agency Decides That The Use Of Project Labor Agreements Will— (i) Advance The Federal Government's Interest In Achieving Economy And Efficiency In Federal Procurement, Producing Labor-management Stability, And Ensuring Compliance With Laws And Regulations Governing Safety And Health, Equal Employment Opportunity, Labor And Employment Standards, And Other Matters; And (ii) Be Consistent With Law. (2) Agencies May Consider The Following Factors In Deciding Whether The Use Of A Project Labor Agreement Is Appropriate For A Construction Project Where The Total Cost To The Federal Government Is Less Than That For A Large-scale Construction Project: (i) The Project Will Require Multiple Construction Contractors And/or Subcontractors Employing Workers In Multiple Crafts Or Trades. (ii) There Is A Shortage Of Skilled Labor In The Region In Which The Construction Project Will Be Sited. (iii) Completion Of The Project Will Require An Extended Period Of Time. (iv) Project Labor Agreements Have Been Used On Comparable Projects Undertaken By Federal, State, Municipal, Or Private Entities In The Geographic Area Of The Project. (v) A Project Labor Agreement Will Promote The Agency's Long Term Program Interests, Such As Facilitating The Training Of A Skilled Workforce To Meet The Agency's Future Construction Needs. (vi) Any Other Factors That The Agency Decides Are Appropriate[lbpcuc(1] please Incorporate Responses To The Following Questions Within Your Submission: (1) Do You Have Knowledge That A Pla Has Been Used In The Local Area On Projects Of This Kind? If So, Please Provide Supporting Documentation. (2) Are You Aware Of Skilled Labor Shortages In The Area For Those Crafts That Will Be Needed To Complete The Reference Project? If So, Please Elaborate And Provide Supporting Documentation Where Possible. (3) Are You Aware Of Time Sensitive Issues/scheduling Requirements That Would Affect The Rate At Which The Referenced Project Should Be Completed? If So, Please Elaborate And Provide Supporting Documentation Where Possible. (4) Identify Specific Reasons Why Or How You Believe A Pla Would Advance The Federal Government’s Interest In Achieving Economy And Efficiency In Federal Procurement. (5) Identify Specific Reasons Why You Do Not Believe A Pla Would Advance The Federal Government’s Interest In Achieving Economy And Efficiency In Federal Procurement. (6) Identify Any Additional Information You Believe Should Be Considered On The Use Of A Pla On The Referenced Project. (7) Identify Any Additional Information You Believe Should Be Considered On The Non-use Of A Pla On The Referenced Project. 8) Will The Inclusion Of The Pla Requirement Affect Industry Proposal Submission Timeliness? Please Provide Anticipated Time Required To Draft And Include A Pla With A Proposal Package. . 9) How Would A Pla On This Project Impact Small Business Participation? Include Any Relevant Information Regarding Small Business Prime And/or Subcontractors Who May Or May Not Be Non-signatory To A Pla Concurrently Working A Separate Contract On The Same Project Site. 10) How Would A Pla Impact Costs, Schedule, And Overall Execution Of The Contract? the Information Gathered In This Survey Should Include The Following Information On Projects Completed In The Last 2 – 5 Years: 1. Project Name And Location 2. Detailed Project Description 3. Initial Cost Estimate Vs. Actual Final Cost 4. Was The Project Completed On Time? 5. Number Of Craft Trades Present On The Project 6. Was A Pla Used? 7. Were There Any Challenges Experienced During The Project? project Location And Description: Ellsworth Afb, Sd this Upcoming Solicitation Will Be Executed Using A Design-bid-build (dbb) Project Delivery Method, Which Will Require The Contractor To Provide The Government With A Complete Facility And Warranty Based On The Request For Proposal (rfp). this Project Will Provide A 22,000 Sq Ft, Single-story Lodging & Readiness Facility For B-21 Air Crews On Alert Status, As Well As An Aerospace Ground Equipment Warm Storage Facility To Support The Alert Apron Aircraft. This Project Is Located Directly Adjacent To And Required To Coordinate With A Variety Of Other B-21 Construction Projects. construction Includes Demolition Of Existing Facility And Construction Of New Drilled Pier Concrete Foundation, Steel Frame Structure, Masonry Walls, Standing Seam Metal Roof, Utilities, Painting & Surface Prep. Special Foundation Due To Local Soils. Utilities Include Domestic & Fire Protection Water, Electrical, Sewer, Gas & Stormwater Drainage. Site Improvements Include Earthwork Landscaping & Exterior Lighting. Pavements Include Parking, Sidewalks & Access Drives. facilities Will Be Designed As Permanent Construction In Accordance With The Dod Unified Facilities Criteria (ufc) 1-200-01, General Building Requirements And Ufc 1-200-02, High Performance And Sustainable Building Requirements. Each Facility Must Be Compatible With Applicable Dod, Air Force, Aircraft, And Base Design Standards. In Addition, Sustainable (green) Construction Materials And Techniques Shall Be Used Where Cost Effective And/or Where Specified. This Project Will Comply With Dod Antiterrorism/force Protection Requirements Per Unified Facilities Criteria. special Construction And Functional Requirements: The Project Will Be Constructed On / Near The Existing Alert Apron At Eafb. As Such, The Project Will Be Constructed Adjacent To – And May Be Required To Integrate With Active Airfield Operations. It Will Also Be Constructed Adjacent To Other Active B-21 Facility Construction Sites. Demolition Of Existing Facilities, Utilities, And Infrastructure – To Include Hazardous Materials Contaminated Apron And Soils May Be Required. small Businesses Are Reminded Under Far 52.219-14© (1), Limitations On Subcontracting Services. At Least 50 Percent Of The Cost Of Contract Performance Incurred For Personnel Shall Be Expended For Employees Of The Concern. Prior Government Contract Work Is Not Required For Submitting A Response To This Sources Sought Synopsis. magnitude Of Construction: disclosure Of The Magnitude Of Construction, As Prescribed In Far 36.204 And Dfars 236.204, Is Between $25m And $100m. This Project Will Be Primarily Funded With Milcon-appropriated Dollars. project Period Of Performance: 800 Calendar Days From Construction Ntp. estimated Construction Contract Award Will Be Second Quarter Of Fiscal Year 2026. pla Survey Responses Are To Be Sent Via Email To James.r.willett@usace.army.mil And Courtesy Copy Brittany.c.gull@usace.army.mil No Later Than 2:00 P.m. Cdt, 28 January 2025. [lbpcuc(1]all Of This Has Been Updated To The Current Version Of Far 22.503.

Details: Description I. Project Billboard Pc 1.00 Ii. Temporary Facility Lot 1.00 Iii. Occupational Safety And Health Program Lot 1.00 Iv. Layout/staking And Temporary Enclosure Lot 1.00 V. Demolition Works Cu.m. 92.25 Vi. Clearing And Disposal Lot 1.00 Vii. Soil Treatment Works Lot 1.00 Viii. Earthworks A. Excavation Works (manual) Cu.m. 135.36 B. Backfiling Works Cu.m. 89.47 C. Earthfill Cu.m. 88.02 D. Gravel Bedding Cu.m. 15.65 Ix. Concrete Works A. 3000 Psi Concrete Cu.m. 52.21 B. 3500 Psi Concrete Cu.m. 73.06 C. Reinforcing Bars Kgs 16,949.33 D. Formworks Sq.m. 515.67 E. Metal Deck Sq.m. 193.98 F. Shoring Jack Rental Lot 1.00 G. Pumpcrete Rental Lot 1.00 X. Masonry Works A. 5" Chb Laying Sq.m. 510.37 B. Plastering Works (rough Finish) Sq.m. 963.76 Xi. Waterproofing Works Sq.m. 12.40 Xii. Structural Steel Works A. Main Truss & Pratt Truss Kgs 2,489.76 B. Roof Steel C- Purlins Kgs 1,750.32 C. Roof Frame Accessories Lot 1.00 Xiii. Roofing Works A. Tinsmithry Sq.m. 271.00 B. 24" Bended Accessories (spanish) I.m. 107.42 C. Roof Accessories Lot 1.00 Xiv. Carpenry Works A. Celling Works (metal Furring) Sq.m. 392.96 B. Airvents Lot 1.00 Xv. Tile Works A. 30cm X 30cm Vitrified Ceramic Tiles Sq.m. 409.00 B. 40cm X 40cm Vitrified Ceramic Tiles Sq.m. 352.20 C. Stairnosing Lot 1.00 Xvi. Painting Works A. Masonry/concrete Surface A.1. Surface Preparation - Interior Sq.m. 481.88 A.2. Surface Preparation - Exterior Sq.m. 481.88 A.3. Base Coat And Top Coat Sq.m. 963.76 B. Fiber Cement Surface Sq.m. 392.96 C. Wood Surface Sq.m. 314.00 D Steel Surface Sq.m. 385.05 E. Scaffolding Rental Lot 1.00 Xvii. Doors And Windows Lot 1.00 Xviii. Steel Works Lot 1.00 Xix. Plumbing Works Lot 1.00 Xx. Sanitary Works Lot 1.00 Xxi. Fire Protection Works Lot 1.00 Xxii. Electrical Works Lot 1.00 Xxiii. Septic Vault A. Excavation Works (manual) Cu.m. 15.06 B. Concrete , 3000 Psi Cu.m. 0.94 C. Reinforcement Kg. 23.31 D. Hdpe Polysept Septic Tank Lot 1.00 E. Backfiling Works Cu.m. 6.08 F. Sanitary And Piping Works Lot 1.00 Xxiv. Cistern Tank Lot 1.00 Xxv. Pump House Lot 1.00 Xxvi. Catch Basins Lot 1.00

Details: Description Republic Of The Philippines Province Of Agusan Del Norte Municipality Of Remedios T. Romualdez Invitation To Bid For Proposed Rice Processing System 2 (phase 1) 1. The Municipality Of Remedios T. Romualdez, Agusan Del Norte Through The 20% Development Funds Intends To Apply The Sum Of P7,996,472.47 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Proposed Rice Processing System 2 (phase 1) Located At Barangay Balangbalang, Rtromualdez, Agusan Del Norte. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Remedios T. Romualdez, Agusan Del Norte Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required (150) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 4. Interested Bidders May Obtain Further Information From Office Of The Bac, 2nd Floor, Municipality Of Remedios T. Romualdez, Agusan Del Norte And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. – 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 13, 2024 To January 9, 2025 From Given Address And Website Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos (php10,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees. 6. The Municipality Of Remedios T. Romualdez Will Hold A Pre-bid Conference On December 23, 2024, 10:00 O’clock In The Morning At Bac Office, 2nd Floor, Municipal Building, Which Shall Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 9, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On January 9, 2025, 2:00 O’clock In The Afternoon, At Bac Office, 2nd Floor, Municipal Building. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipality Of Remedios T. Romualdez, Agusan Del Norte Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulation (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Mr. Donald B. Maglangit Bac Secretariat, Head Office Of The Bac 2nd Floor, Rtr Municipal Hall Rtromualdez, Agusan Del Norte Engr. Rhoderick F. Lerias Bac Chairman Description: Item No. Description Qty. Unit I. Site Works Ii, Masonry Works Iii. Concrete Works Iv. Roofing & Roof Framing Installation V. Plastering Vi. Doors & Windows Vii. Painting Works

Details: Description Republic Of The Philippines Province Of Isabela Municipality Of Jones Invitation To Bid For Propesed Construction Of Eco-tourism Booth For The Bambanti Festival 2025 The Municipality Of Jones, Isabela, Through General Fund Intends To Apply The Sum Of Nine Hundred Four Thousand Pesos Only (php904,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Proposed Construction Of Eco-tourism Booth For The Bambanti Festival 2025 With Solicitation No.: Infra-2025-01. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Municipality Of Jones, Isabela Now Invites Bids For Proposed Construction Of Eco-tourism Booth For The Bambanti Festival 2025 With Solicitation No.: Infra-2025-01, With The Following List Of Works: Item No. Scope Of Works Quantity Unit Amount 1 Steel Works 1.00 L.s. 154,177.91 2 Painting Works 110.75 Sq.m. 48,615.86 3 Carpentry Works 110.75 Sq.m. 306,182.13 4 Electrical Works 1.00 L.s. 275,109.98 5 Plumbing Works 1.00 L.s. 32,198.51 6 Landscaping 1.00 L.s. 87,715.61 Total 904,000.00 Completion Of The Works Is Required 45 Calendar Days Upon Start Date. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Interested Bidders May Obtain Further Information From The Local Government Unit Of Jones Isabela And Inspect The Bidding Documents At The Address Given Below From Monday To Friday 8:00 A.m. To 5:00 P.m. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders Starting On January 7, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (php1,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before 2:00 P.m. Of January 14, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On January 14, 2025 At 2:00 P.m. At The Office Of The Bids And Awards Committee. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. The Municipality Of Jones Isabela Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Engr. Florentino U. Agliam, Jr. Municipal Engineer/ Bac Vice Chairperson Local Government Unit Of Jones, Isabela 09350589619 Engineer_jun2016@yahoo.com Www.jones-isabela.com (sgd) Engr. Florentino U. Agliam, Jr. Chairperson, Bids And Awards Committee