Paint Tenders

Details: Description Item No. Description Qty Unit 1 Phenolic 1/2x4x8 18 Pcs 2 Coco Lumber 2x2x12 50 Pcs 3 Cw Nail #3 14 Kg 4 Cw Nail #2 20 Kg 5 Tie Wire # 16 14 Kg 6 Portland Cement 77 Pcs 7 Sand, S1 5 Cu.m 8 Gravel (3/4) 9 Cu.m 9 12mm Ø 36 Pcs 10 10mm Ø 48 Pcs 11 G.i Pipe Schd 40 2" 5 Pc 12 G.i Pipe 1" 1 Pc 13 Flat Bar 1/4 X 1" 7 Pc 14 Cyclone Wire 2'x4"x6m 1 Roll 15 Barbed Wire 2 Roll 16 Welding Rod 2 Box 17 Cutting Disc 1 Box 18 Grinding Disc 1 Box 19 Red Oxide 1 Liter 20 Ac Thinner 2 Bottle 21 Paint Brush #2 2 Pcs 22 Enamel Paint (dark Blue) 2 Liter 23 Enamel Paint (white) 2 Liter

Details: Description Billboard; Structure Excavation(unclassified Materials); Reinforced Concrete; Reinforcing Steel Of Reinforced Concrete Structure For One-storey; 100mm Chb Non Load Bearing/load Bearing (including Rsb)’; Cement Plaster Finish; Aluminum Glass Window(sliding/casement/awning/fixed Type); Wooden Panel Door; Painting Works (masonry Painting); Installation Of Rafter Truss, Purlins And Fascia Board; Prepainted Metal Sheets; Fabricated Metal Roofing Accessories;(flashing);carpentry And Joinery Works;formworks And Falseworks(for One Storey Building);unglazed Tiles/granite Tiles/ Synthetic Granite Tiles; Plumbing Works; Transportation/freight Hauling Of Materials; Manual Hauling Of Materials; Safety And Health(construction Health And Safety Requirement); Equipment Requirement: Bar Bender; Bar Cutter; Cargo/service Truck;32 C.d

Details: Description Invitation To Bid Pb-01-2025 Supply And Delivery Of Technical Vocational Livelihood (tvl) Equipment Packages For Public Senior High Schools 1. The Department Of Education, Schools Division Of Ilocos Sur Through The Republic Act No. 11975 – Fy 2024 Gaa (sub-allotment Release Order No. Roi-24-1175) Intends To Apply The Sum Of Two Million Three Hundred Thirty Six Thousand Two Hundred Eighty Pesos (p2,336,280.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Project Supply And Delivery Of Vocational Livelihood (tvl) Equipment Packages For Public Senior High Schools. Bids Received Higher Than The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Project Description Qty. Unit Unit Cost Abc For The Project (in Php) Tvl Tools & Equipment (bread And Pastry Production) 1 Air Compressor With Airbrush Cake Decorating Set (medium) Pc 1 2,414.00 2,414.00 2 Beater (standard) Pc 6 287.00 1,722.00 3 Board, Chopping, 6 Color Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, Preferably Packed In Set Set 6 920.00 5,520.00 4 Boiler, Double (material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges) Set 1 1,955.00 1,955.00 5 Bowl, Mixing (6 Pcs/set) Pc 12 2,415.00 28,980.00 6 Cake Pans, Round #4, #6, #8, #10, #12, #14, #16 Pc 6 1,725.00 10,350.00 7 Cake Stand, With Tier (type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tiers Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3: 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Pc 6 1,725.00 10,350.00 8 Cake Turn Table (body Shape: Circular Material: Cast Aluminum Plate. And Cast-iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm) Pc 3 1,265.00 3,795.00 9 Coupler (tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case) Pc 13 207.00 2,691.00 10 Cup, Measuring (for Solid) The Standard 4 Measuring Cup Sizes Are: 1 Cup, 1/2 Cup, 1/3 Cup And 1/4 Cup Set 12 977.00 11,724.00 11 Cup, Measuring, 250 Ml For Liquid Pc 12 632.00 7,584.00 12 Cup, Measuring, 500ml For Liquid Pc 12 747.00 8,964.00 13 Cutter, Dough (stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Length: 15 Cm X Width: 11 Cm X Thickness: 1.2mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage) Pc 1 402.00 402.00 14 Cutter, Pie (medium) Pc 6 460.00 2,760.00 15 Flour Sifter, Hand Cranked (standard) Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm (minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh #30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Pc 6 747.00 4,482.00 16 Grater 4 Sided (s) Pc 6 402.00 2,412.00 17 Knife, Kitchen (s) Pc 6 747.00 4,482.00 18 Knife, Pallet (s) Pc 6 573.00 3,438.00 19 Ladle, 3 0z Pc 6 241.00 1,446.00 20 Loaf Pan Big Pc 6 862.00 5,172.00 21 Loaf Pan, Medium Pc 6 517.00 3,102.00 22 Loaf Pan, Small Pc 6 126.00 756.00 23 Muffin Pan, Big Pc 6 448.00 2,688.00 24 Muffin Pan, Medium Pc 6 414.00 2,484.00 25 Muffin Pan, Small Pc 6 322.00 1,932.00 26 Pie Pan, 10 Inches Diameter Pc 6 517.00 3,102.00 27 Pie Pan, # 6, #8, #10 Set 6 1,265.00 7,590.00 28 Pillars, Cake (big) Pc 6 517.00 3,102.00 29 Piping Bag (100 Pcs Per Pack) (m) Pack 25 241.00 6,025.00 30 Rectangular Pan, (7” X 11”) Pc 4 263.00 1,052.00 31 Rolling Pins (3cm X 10 Cm) Pc 12 402.00 4,824.00 32 Rubber Scraper (m) Pc 12 207.00 2,484.00 33 Sauce Pan 22cm Pc 13 632.00 8,216.00 34 Sheet Pan (m) Pc 15 517.00 7,755.00 35 Spoon, Measuring (plastic) ¼ Teaspoon, ½ Teaspoon, 1 Teaspoon, And 1 Tablespoon Set 26 287.00 7,462.00 36 Spoon, Wooden (s) Pc 15 92.00 1,380.00 37 Strainer Stainless (m) Pc 15 212.00 3,180.00 38 Tip, Decorating X 24 (small To Large) Set 23 632.00 14,536.00 39 Weighing Scale, 10 Kgs (digital) Pc 13 2,875.00 37,375.00 40 Weighing Scale,5 Kgs, (digital) Pc 13 1,265.00 16,445.00 41 Wire Whisk, Medium Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Pc 13 286.00 3,718.00 Sub Total 259,851.00 Tvl Tools & Equipment (computer System Servicing) 42 Allen Wrench (set Of 10 Pieces: 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm, 4 Mm, 5 Mm, 5.5 Mm, 6 Mm, 8 Mm, 10 Mm;) Set 50 450.00 22,500.00 43 Anti-static Device (anti-static Wrist Strap) Adjustable And Elastic Wristband With Integrated 1 Mega Ohm Resistor Pc 50 250.00 12,500.00 44 Combination Pliers, 8" Pc 50 350.00 17,500.00 45 Crimping Tool (rj 11/45) Pc 52 450.00 23,400.00 46 Desoldering Pump (plastic Or Aluminum Housing) Pc 52 250.00 13,000.00 47 Electric Drill, Portable (rated Voltage: 220 / 240 Volts, Ac 60 Hz Power In Watts: 550 To 650 Watts) Pc 4 4,000.50 16,002.00 48 External Optical Drive Cd-r Dvd-r (interface: Usb 3.0 Or Better; 2. Compatibility: Windows 2000, Xp, Vista, 7, 8, 10, Apple Mac, Linux Or Better; 3. Read Speed: At Least 8x Dvd, At Least 24x Cd; 4. Write Speed: At Least 4x Dvd, At Least 16x Cd) Pc 6 1,000.00 6,000.00 49 Flash Drive (1tb) Pc 52 850.00 44,200.00 50 Flashlight, Head-mounted (rechargeable) Minimum Of 160 Lumens; Beam Distance: Minimum Of 150 Meters; Includes 220 V Ac Charger/power Adaptor (or Equivalent) Pc 50 550.00 27,500.00 51 Hub / Switch ( Standards And Protocols: Ieee 802.3, Ieee802.3u, Ieee802.3x Csma/cd Interface: 8 10/100mbps Ports, Auto-negotiation, Auto-mdi/mdix External Power Supply Adapter: 100-240vac,50/60hz Fanless Data Rates: 10/100mbps At Half Duplex; 20/200mbps At Full Duplex Led Indicator: Power, 1, 2, 3, 4, 5, 6, 7, 8 Dimensions: 5.3 X 3.1 X 0.9 In. (134.5 X 79 X 22.5mm) (approx.) Pc 42 2,000.00 84,000.00 52 Lan Cable Tester (1. Package Contents: 8-port 10/100mbps Desktop Switch, Power) Pc 50 252.00 12,600.00 53 Long Nose Pliers, 8" Pc 50 200.00 10,000.00 54 Multimeter, Digital (auto Range/data Hold/back Light/ Led Lamp/diode Test/triode Test/continuity/ Overload Protection/low Battery Indication/auto Power Off/short-circuit Protection. Display: True Rms, 6000 Counts, 3 5/6 Digits Overload Display: Display Ol Dc Voltage:600mv/6v/60v/600v(0.5%+3), 1000v (0.5%+3) Ac Voltage:600mv/6v/60v/600v/750v (0.8%+5) Dc Current:600a/6000a/60ma/600ma/10a (1.2%+3) Ac Current:600a/6000a/60ma/600ma/10a (1.5%+3) Resistance:600/6k/60k/600k/(1.0%+3) ,6m/60m (1.5%+3) Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf (4.0%+5), 10mf/100mf(5.0%+5 Pc 40 800.00 32,000.00 55 Patch Panel (48 Ports) Cat6 Cable Material: Abs Plastic Application: Utp(unshielded) Certification: Rohs, Iso, Ce Rj45 Connector: Two Rows (1-24 Ports & 25-48 Ports) Transport Package: 1pcs/box Pc 50 2,500.00 125,000.00 56 Pc Video Camera (5.0 Mega Pixel Web Camera, Usb-type; With Microphone For Laptop And Desktop Pc Use; Resolution: At Least 640 X 480; Support Windows Xp/7/8/equivalent Mac Os Or Later Versions) Pc 20 500.00 10,000.00 57 Phillip’s Screwdriver, 8" Insulated Pc 50 250.00 12,500.00 58 Precision Screwdriver Set (1 Set Comes With The Following: 3 X Phillips Tip No. 00, 0, And 1; 6 X Standard Tip No. 1, 1.2, 1.4, 1.8, 2.4, And 3.0; 1 X Awl; 1 X Magnet; Plastic Storage Case;) Set 50 500.00 25,000.00 59 Soldering Iron, 60w Pc 50 250.00 12,500.00 60 Standard Screwdriver (flat), 8” Insulated Pc 50 250.00 12,500.00 61 Uninterruptible Power Supply (ups) Battery (included): Lithium-ion Battery Or Maintenance-free Sealed Lead-acid Battery With Suspended Electrolyte: Leakproof Voltage: Nominal Input Voltage: 230v, 50/60hz Output Power Capacity: 600va (minimum) Pc 40 4,000.00 160,000.00 62 Usb External Hd 1tb Pc 10 3,500.00 35,000.00 63 Wire Stripper (10 Awg To 24 Awg Length: 7 Inches (minimum) Pc 54 250.00 13,500.00 64 Wireless Access Point ( Access Point Dual Band Wi-fi Band / Data Transfer Rate: 867 Mbps At 5 Ghz And 300 Mbps At 2.4ghz Band Operating Modes: Access Point (ap), Bridge, Wireless Client, Repeater Interface: One 10/100m Ethernet Port(rj45), Support Passive Poe Power On/off Button And Reset Button Comes With External Power Supply: 5vdc-12vdc / 0.5a-1.0a Dimensions ( L X W X D ): (76-191 ×47-125 ×30-68mm) Pc 50 1,500.00 75,000.00 Subtotal 802,202.00 Tvl Tools & Equipment (cookery) 65 Apple Corer (material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Pc 10 444.00 4,440.00 66 Bain Marie, Table ( Type: Bain Marie Table (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Source: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v) Pc 4 20,700.00 82,800.00 67 Blender, Electric (material Housing: Plastic (polypropylene) Jar Height: 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220volts/ 240volts, 50hz/ 60hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades) Pc 4 2,875.00 11,500.00 68 Board, Chopping/cutting, Plastic (board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) Pc 20 289.00 5,780.00 69 Boiler, Double (stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Sides Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 3 Liters (minimum) Pc 2 2,128.00 4,256.00 70 Braising Pan, Medium Pc 10 1,494.00 14,940.00 71 Can Opener (stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Pc 4 242.00 968.00 72 Casserole, Medium Pc 10 702.00 7,020.00 73 Casserole, Small Pc 12 669.00 8,028.00 74 Colander, Medium Pc 10 340.00 3,400.00 75 Colander, Small Pc 10 303.00 3,030.00 76 Cup, Measuring (for Solid) (cup, 1/2 Cup, 1/3 Cup, 1/4 Cup And 1/8 Cup.) Set 10 518.00 5,180.00 77 Dispenser, Paper Towel (abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Pc 10 403.00 4,030.00 78 Stand Fan, Electric (metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220/240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Pc 5 1,495.00 7,475.00 79 Fire Extinguisher (with Contents) Capacity 5 - 6 Kgs Rechargeable Cylinder Metal Working Pressure Of Cylinder : 400 Psi Pc 1 2,875.00 2,875.00 80 Fish Poacher, Medium (oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm) Pc 10 2,076.00 20,760.00 81 Fork, Carving (square Shape Prong Prong Material: High Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prongs Comes With Square - Shaped Prongs And Pointed Tips Abs Plastic Triple-riveted Handle) Pc 10 593.00 5,930.00 82 Fork, Kitchen (body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle: Abs Plastic Number Of Tines: 2 Tines With Tapered End Pc 10 248.00 2,480.00 83 Frying Pan, Large Pc 10 438.00 4,380.00 84 Frying Pan, Medium Pc 10 334.00 3,340.00 85 Frying Pan, Small Pc 12 296.00 3,552.00 86 Funnel, S/s, Medium Pc 10 242.00 2,420.00 87 Funnel, S/s, Small Pc 10 207.00 2,070.00 88 Garbage Bin (material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel) Pc 4 863.00 3,452.00 89 Glass Rack (body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 ½ Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case ) Pc 12 817.00 9,804.00 90 Ice Cream Scooper (medium) Pc 2 288.00 576.00 91 Knife, Boning (28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets) Pc 10 564.00 5,640.00 92 Knife, Chef (chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) Pc 10 449.00 4,490.00 93 Knife, Cleaver (forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets) Pc 10 552.00 5,520.00 94 Knife, Oyster (stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) Pc 10 547.00 5,470.00 95 Light, Emergency (metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector ) Pc 1 2,013.00 2,013.00 96 Meat Slicer (die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v) Pc 10 3,220.00 32,200.00 97 Pastry Tube (standard) Pc 10 633.00 6,330.00 98 Peeler, Y-type (stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Pc 10 275.00 2,750.00 99 Pepper And Salt Mill (round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices) Pc 10 1,380.00 13,800.00 100 Piping Bag (transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) Pc 10 242.00 2,420.00 101 Plate Rack (body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) Pc 12 2,099.00 25,188.00 102 Preparation Table With Sink (stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Tabletop And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) Pc 10 4,485.00 44,850.00 103 Pressure Cooker (polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring) Pc 2 5,520.00 11,040.00 104 Roasting Pan (medium) Pc 10 1,840.00 18,400.00 105 Scissor, Kitchen (body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum) Width: 7.5 Cm (minimum) Pc 10 448.00 4,480.00 106 Siever, Small (stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Pc 10 677.00 6,770.00 107 Skimmer, Fine (stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Pc 10 758.00 7,580.00 108 Skimmer, Spider (stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm(minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Pc 10 472.00 4,720.00 109 Soup Cup Rack (polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm) Pc 12 1,553.00 18,636.00 110 Soup Ladle, 12 Oz Pc 10 472.00 4,720.00 111 Soup Ladle, 3 Oz Pc 10 300.00 3,000.00 112 Soup Ladle, 6 Oz Pc 10 403.00 4,030.00 113 Soup Ladle, 8 Oz Pc 10 455.00 4,550.00 114 Spatula (stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches) Pc 8 294.00 2,352.00 115 Spoon, Kitchen (stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type) Pc 8 403.00 3,224.00 116 Spoon, Kitchen (slotted) Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots Preferably With A Packing Case Heat Resistant Up To 220 ° C Pc 8 386.00 3,088.00 117 Spoon, Measuring (body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. (7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) Set 8 291.00 2,328.00 118 Spoon, Parisienne Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Pc 8 301.00 2,408.00 119 Spoon, Serving (stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Pc 24 365.00 8,760.00 120 Spoon, Wooden Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Pc 8 92.00 736.00 121 Stock Pot, Large (stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. Pc 5 2,703.00 13,515.00 122 Strainer Chinois, Small Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Pc 5 380.00 1,900.00 123 Strainer Chinois, Medium (stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Pc 5 420.00 2,100.00 124 Strainer Medium, Fine Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Pc 8 248.00 1,984.00 125 Strainer Small, Fine Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Pc 8 240.00 1,920.00 126 Tenderizer, Medium Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes Weight: 250 Grams To 500 Grams Pc 8 559.00 4,472.00 127 Thermometer, Pocket /pin Tubular Pen Style Digital Thermometer Product Size: 100 Mm X 40 Mm X 14 Mm (minimum) Display Size: 40 Mm X 20 Mm (minimum) Prove Length: 200 Mm (minimum) Measuring Range: -50 °c To 300 °c (-58 ⁰f To 372 ⁰f) Resolution: 0.1 °c / 0.2 °f Pc 10 880.00 8,800.00 128 Tong, 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Pc 10 322.00 3,220.00 129 Tong, 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Pc 10 291.00 2,910.00 130 Tray, Baking, Small Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Pc 10 548.00 5,480.00 131 Tray, Utility Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Pc 12 644.00 7,728.00 132 Turner 3" X 6" Pc 10 541.00 5,410.00 133 Utility Cart Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Pc 2 14,713.00 29,426.00 134 Weighing Scale, 1 Kg, Digital Engineering Plastic And Stainless-steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm) 163 Mm X 245 Mm X 79 Mmm (minimum) Pc 6 1,630.00 9,780.00 135 Weighing Scale, 5 Kg Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Pc 10 1,794.00 17,940.00 136 Wire Skimmer, Small Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Pc 10 408.00 4,080.00 137 Wire Whisk, Heavy Duty: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Pc 2 564.00 1,128.00 138 Wire Whisk, Medium Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Pc 10 488.00 4,880.00 139 Wire Whisk, Small Balloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Pc 10 372.00 3,720.00 140 Wok, Medium: Round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Pc 10 771.00 7,710.00 141 Wok, Small Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Pc 10 679.00 6,790.00 142 Working Table Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Pc 5 13,628.00 68,140.00 143 Zester Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe Pc 10 397.00 3,970.00 Sub Total 702,982.00 Tvl Tools & Equipment ( Food And Beverages Services) 144 Chair, Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimension: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box Pc 50 1,955.00 97,750.00 145 Coffee Pot, 2 Pints Round Material: Stainless Steel With Cover Capacity: 2 Pints Outside Diameter: 90 -110 Mm Over-all Height: 200 - 230 Mm Thickness: 0.5 - 1 Mm Pc 4 1,139.00 4,556.00 146 Container, Creamer Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter: 50 - 65 Mm Height: 80 - 105 Mm Color: White Pc 10 288.00 2,880.00 147 Cups And Saucers 5-6 Oz. 1. Material: Porcelain 2. Capacity: 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color: White 5. The Item Must Be Of Good Quality Packed In Carton Box Pc 24 403.00 9,672.00 148 Fork, Cocktail Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Type: Rounded Tip Handle Over-all Length: 110 - 165 Mm Width: 20 - 30 Mm (minimum) Handle Thickness: 2 Mm To 4 Mm Handle Length: 75 - 90 Mm Small, Colo: Silver The Item Must Be Branded And Have Good Quality. Pc 24 173.00 4,152.00 149 Fork, Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design, Rounded Tip Handle Length: 150 Mm - 175 Mm Width: 20 – 30mm Handle Thickness: 1.5mm - 3 Mm Number Of Tines: 4 Handle: 130 Mm (minimum) Color: Silver Pc 24 173.00 4,152.00 150 Fork, Dinner Fork Body Shape: Fork Shape Material / Appearance: Stainless Steel, Highly Polished, With 4tines Over - All Length: 120 - 175 Mm Thickness Of Handle: 2 - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality Pc 24 196.00 4,704.00 151 Fork, Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance: Stainless Steel, Highly Polished, With Plain Design Over-all Length: 180 - 215 Mm Fork Width: 1.5 Mm - 3 Mm Fork Thickness: 1 Mm - 2 Mm Number Of Tines: 4 Length Handle: 120 - 130 Mm Handle Thickness: 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch Pc 24 288.00 6,912.00 152 Fork, Oyster (4 To 5-1/2 Inches In Overall Length.) Pc 24 173.00 4,152.00 153 Glass, Champagne Flute Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Pc 24 288.00 6,912.00 154 Glass, Collins Tumbler Body Shape: Round Material: Clear Glass Capacity: 10 Oz To 14 Oz Thickness: 1.5 -3 Mm (minimum) Packed In Carton Box Pc 24 173.00 4,152.00 155 Glass, Juice / Hi- Ball Material: Clear Glass Type: Hi-ball Height: 140 - 160 Mm Bottom Diameter: 50 -70 Mm Top Diameter: 50 - 70 Mm Thickness: 2 - 4 (minimum) Capacity: 8 Oz. To 10 Oz. Dishwasher Safe The Item Must Be Branded And Good Quality Pc 24 518.00 12,432.00 156 Glass, Pilsner (iced Tea Glass) Type: Flared Rim Body Shape: Round Slender Material: Clear Glass Capacity: 20 Oz. To 23 Oz. Over-all Length: 22 -25 Cm Thickness Of Glass: 1 -3 Mm With Flared Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality Pc 24 288.00 6,912.00 157 Glass, Red Wine Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55 - 60 Mm Thickness: 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity: 250 -300 Ml Stem Diameter: 6 - 8 Mm Stem Length: 85 - 90 Mm Base Diameter: 75 - 85 Mm Base Thickness: 2 - 4 Mm Pc 24 403.00 9,672.00 158 Glass, White Wine Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55 - 60 Mm Thickness: 1.5 - 3 Mm Over -all Length: 200 -220 Mm Capacity: 270 - 300 Ml Stem Diameter: 6 - 8 Mm Stem Length: 75 - 85 Mm Base Diameter: 70 - 80 Mm Base Thickness: 2 - 5 Mm Pc 24 443.00 10,632.00 159 Gravy Boats Boat Shape With Handle Material: Stainless Steel Capacity: 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Pc 4 225.00 900.00 160 Ice Bucket, 2 Liters With Tongs Circular Set Includes: Ice Bucket Material: Stainless Steel Diameter: 140 - 180 Mm Height: 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity: 2 Liters (minimum) Pc 5 471.00 2,355.00 161 Knife, Butter Stainless Steel W/ Highly Polished Appearance Over-all Length: 140 Mm - 150 Mm Handle Thickness: 3 Mm - 5 Mm With Dull Edge And Rounded Tip Pc 24 127.00 3,048.00 162 Knife, Dinner Flat With Round Tip Material / Appearance: Stainless Steel Blade Highly Polished Handle Material: Stainless Steel Overall Length: 160 - 190 Mm Blade Thickness: 2 - 4 Mm Handle Thickness: 3 - 6 Mm Pc 24 213.00 5,112.00 163 Knife, Fish Flat With Pointed Tip Material / Appearance: Stainless Steel, Highly Polished W/ Plain Design Overall Length: 200 - 220 Mm Width Blade: 20 - 25 Mm Thickness Of Blade: 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Pc 24 207.00 4,968.00 164 Menu Folder (a4 (297mm X 210 Mm) And A5 (210 Mm X 148 Mm) Pc 5 518.00 2,590.00 165 Napkin Holder Rectangular Material: Stainless Steel With Highly Polished Appearance Dimension: Width: 70 - 90 Mm X Length : 150 - 170 Mm Thickness: 0.7 Mm -2 Mm Packed In Plastic Pouch Pc 6 247.00 1,482.00 166 Order Pads Rectangular Material: 80gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Pc 5 58.00 290.00 167 Pepper And Salt Mill: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Pc 20 1,380.00 27,600.00 168 Plate Covers Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Pc 8 305.00 2,440.00 169 Plate, Dessert, 7”to 8” Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color: White Inner Diameter: 145 To 165 Mm Thickness: 3 To 6 Mm Pc 24 207.00 4,968.00 170 Plate, Dinner, 10” Circular Material: Porcelain With No Design Color: White Inner Diameter: 200 Mm - 215 Mm Outer Diameter: 250 - 260 Mm Thickness: 3 Mm - 6 Mm Pc 24 437.00 10,488.00 171 Plate, Fish, 8” To 9” Circular Material: Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color: White Inner Diameter: 165 Mm - 190 Mm(minimum) Thickness: 3 Mm - 6 Mm Pc 24 207.00 4,968.00 172 Round Table (8's) (54” Or 60”) Pc 10 9,034.00 90,340.00 173 Salad Forks (6” Long) Pc 24 127.00 3,048.00 174 Salad Knife 8” Pc 24 207.00 4,968.00 175 Salad Plates 7” To 8” Pc 24 242.00 5,808.00 176 Salt And Pepper Shakers Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Pc 4 207.00 828.00 177 Sauce Ladles Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Pc 10 403.00 4,030.00 178 Server, Cake Stainless Steel Blade, Highly Polished Appearance 2. Over-all Length: 220 To 270 Mm 3. Width: 60 - 80 Mm 4. Thickness: 1.5 Mm To 2 Mm 5. Handle: 120 -140 Mm Long, Non-toxic Plastic 6. Shape: Shovel-shaped 7. Color: Silver Pc 10 571.00 5,710.00 179 Service Forks : Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Pc 6 207.00 1,242.00 180 Service Tray: Rectangular Material: Plastic (pp) Size: 14 Inches X 18 Inches X 1 Inch (minimum) Colo: Any Pc 6 518.00 3,108.00 181 Show/service/ Base Plates 11” To 14” Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Set 6 1,208.00 7,248.00 182 Side Plates Or Bread Plates 6” Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness: 3 Mm - 6mm Pc 24 242.00 5,808.00 183 Side Towels Rectangular Material: Oxford Polyester Soft Cloth Over-all Length: 640 - 680 Mm Over-all Width: 420 -460 Mm Color: Plain White Pc 10 349.00 3,490.00 184 Silver Platter Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Pc 10 570.00 5,700.00 185 Soup Bowl Circular Material: Porcelain Capacity: 24 Oz. (minimum) Pc 24 437.00 10,488.00 186 Soup Ladle Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -235 Mm Ladle Bowl Details: 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Pc 10 366.00 3,660.00 187 Soup Tureen Round Material: Stainless Steel Capacity: 7 - 11 Quart Size: 60 X 35 X 32 Cm (minimum) Pc 10 695.00 6,950.00 188 Spoon, Dessert Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length: 175 To 190 Mm Thickness: 2 Mm - 3 Mm Shorter Handle: 120 -130 Mm Color: Silver Pc 24 125.00 3,000.00 189 Spoons, Service Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Pc 6 136.00 816.00 190 Spoons, Soup (cream And Consume) Round Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length: 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Pc 24 160.00 3,840.00 191 Steak Knife (5”) Pc 24 251.00 6,024.00 192 Sugar Container Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Pc 10 288.00 2,880.00 193 Tablecloth, 54 X 54 Inches Rectangle Material: Linen Color: Any Color But Not Black Feature: Washable Pc 10 942.00 9,420.00 194 Tablecloth, 64x64 Inches Rectangular Rectangle Material: Linen Color: Any Color But Not Black Feature: Washable Pc 10 1,208.00 12,080.00 195 Table Napkins, Cloth, 16” X 16” Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Color: Plain White Pc 60 424.00 25,440.00 196 Table Skirting Cloth Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch Pc 10 2,185.00 21,850.00 197 Table, Square/rectangular (4's Or 6's) Square/rectangle Materia: High Density Polyethylene Tabletop Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Pc 4 5,382.00 21,528.00 198 Tea Pot, 2 Pints Porcelain Type Body Shape: Round With Handle And Pouring Spout Material: Porcelain Capacity: (2 Pint) Color: White Pc 10 1,139.00 11,390.00 199 Teaspoon Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Pc 24 92.00 2,208.00 200 Tong, 8 Inches Standard Material: Stainless Steel Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Pc 7 291.00 2,037.00 201 Tooth Pick Holder Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch Pc 10 101.00 1,010.00 202 Tray Stand Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Pc 5 2,282.00 11,410.00 203 Tray, Bill Folders/ Change Height: 190 - 220 Mm 3. Width: 120 -140 Mm 4. Thickness: 2 Mm To 3 Mm (minimum) 5. Color: Black Pc 5 271.00 1,355.00 204 Tray, Round (bar) Round Material: (pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Pc 8 443.00 3,544.00 205 Water Goblet Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Pc 24 124.00 2,976.00 206 Water Pitcher Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Pc 10 516.00 5,160.00 Sub Total 571,245.00 Total Amount 2,336,280.00 2. The Department Of Education, Schools Division Of Ilocos Sur Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Thirty (30) Calendar Days. Bidders Must Have Completed, Within 10 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criteria As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Deped, Schools Division Of Ilocos Sur, And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. Until 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 28-march 18, 2025 (until 9:00 A.m.) From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb Amounting To Five Thousand Pesos (p5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Deped, Schools Division Of Ilocos Sur Will Hold A Pre-bid Conference On March 7, 2025, At 10:00 A.m. At The Schools Division Office, Bantay, Ilocos Sur, And/or Through Videoconferencing/webcasting Via Google Meet Using The Link: Https://meet.google.com/tjb-zntu-yys Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before March 19, 2025, 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On March 19, 2025, At 9:01 A.m. At The Given Address Below And/or Through And/or Virtual. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Deped, Schools Division Of Ilocos Sur Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Before Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Marillac D. Quinsaat Head – Bac Secretariat Department Of Education, Schools Division Of Ilocos Sur Zone V, Bantay, Ilocos Sur, 2727 Email Address: Ilocos.sur@deped.gov.ph 12. You May Visit The Website/s: For Downloading Of Bidding Documents: Depedilocossur.info Date Of Issue: February 28, 2025 Joye D. Madalipay, Ceso Vi Chairperson, Bids And Awards Committee

Description: Painting Works On Buildings And Facilities In "Tec Maritsa East 2" Ead

Description: Completion Of Bleacher, Retouching & Painting Of Floor Surface And Fabrication And Installation Of Gates At Basiao, Garcia-hernandez, Bohol , Construction Projects ,municipality Of Garcia-hernandez, Bohol

Details: Description Republic Of The Philippines Local Government Unit Of General Santos City Bids And Awards Committee Goods And Consultancy Services City Hall, General Santos City Total Description Of Articles Item No. 1. Traffic Signalization And Cctv Synchronization Program, City Wide, General Santos City (additional) A) Traffic Local Controller 1 Lot @ Php2,501,119.76 1 Pc. Basic Controller 19" 24/40 @ Php996,446.95 1 Pc. 3g & Gps Antenna @ Php26,981.91 1 Pc. 3g 4di/4du With Gps @ Php110,406.81 2 Pcs. Lamp Connection Cable @php32,351.65 = Php64,703.30 4 Pcs. Signal Group Gp 9 @ Php102,154.31 = Php408,617.24 1 Pc. I/o 24 Input @ Php109,480.10 1 Pc. Controller Cabinet @ Php715,035.11 1 Pc. Power Supply 24 V @ Php69,448.34 B) Traffic Signal Head, Led Type Location [1 New Intersection, Upgrading Of Existing 11 Intersections] 1 Lot @ Php27,226,066.64 44 Set 300mm 3 Aspect Ball @ Php126,737.62 = Php5,576,455.28 33 Set 300mm 3 Aspect Arrow @ Php132,784.48 = Php4,381,887.84 46 Set 200mm 3 Aspect Ball @ Php109,456.08 = Php5,034,979.68 37 Set 200mm 3 Aspect Arrow @ Php118,942,44 = Php4,400,870.28 84 Set 300mm Pedestrian Lantern @php93,236.59 = Php7,831,873.56 C) Traffic Sensor And Monitoring Camera 1 Lot @ Php2,506,626.33 1 Pc. Traffic Sensor/monitoring Pole 12m High With Extension Arm Treaded Sensor Bracket @ Php169,050,72 1 Pc. Detection System Processor Hw And Accessories @ Php1,387,657.71 1 Pc. Detection Processor Sw (license) @ Php515,428.25 1 Pc. Fish Eye Camera Sensor @ Php434,489.65 D) Other Monitoring Camera 1 Lot @ Php13,067,828.87 21 Pcs. Ptz Camera @ Php70,712.64 = Php1,484,965.44 21 Pcs. Ptz Camera Bracket @ Php2,000.00 = Php42,000.00 18 Pcs. Anpr Camera @ Php209,528.74 = Php3,771,517.32 18 Pcs. Anpr Camera Bracket @ Php2,500.00 = Php45,000.00 35 Pcs. Face Recognition Camera @ Php146,064.45 = Php5,112,255.75 35 Pcs. Face Recognition Camera Bracket @ Php2,000.00 = Php70,000.00 18 Pcs. White Strobe Lamp @ Php33,081.66 = Php595,469.88 21 Pcs. Ptz Video License @ Php22,164.52 = Php465,454.92 18 Pcs. Anpr License @ Php27,946.52 = Php503,037.36 35 Pcs. Fr Video License @ Php27,946.52 = Php978,128.20 E) Traffic Signal Control Cable (old Existing Traffic Light Locations With Mccain And Peek Controllers) 1 Lot @ Php8,554,874.00 1,800 M. Signal Cable 29c @ Php2,631.55 = Php4,736,790.00 700 M. Signal Cable 19c @ Php1,766.02 = Php1,236,214.00 1,000 M. Signal Cable 12c @ Php1,147.78 = Php1,147,780.00 250 M. Signal Cable 8c @ Php860.16 = Php215,040.00 2,200 M. Signal Cable 4c @ Php430.08 = Php946,176.00 400 M. Signal Cable 3c @ Php397.81 = Php159,124.00 115,000,000.00 Page 2 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. 364 M. Signal Cable 2c @ Php312.50 = Php113,750.00 F) Accessories 1 Lot @ Php2,511,044.60 33 Box Mounting Strap (3/4" Ss) @ Php20,160.20 = Php665,286.60 19 Box Buckle (3/4" Ss) @ Php20,160.20 = Php383,043.80 97 Pcs. Rubber Tape @ Php170.00 = Php16,490.00 206 Pcs. Electrical Tape @ Php170.00 = Php35,020.00 21 Lot Circuit Breaker, Housing And Accessories @ Php67,200.20 = Php1,411,204.20 G) Pole 1 Lot @ Php4,985,416.84 (4) Traffic Type A Pole 4m Arm @ Php151,153.50 = Php604,614.00 (4) Traffic Type B Pole @ Php84,353.38 = Php337,413.52 (24) Straight Pole 6m @ Php110,850.38 = Php2,660,409.12 (21) On Pole Comm Box @ Php65,856.20 = Php1,382,980.20 H) Traffic Software Solutions And License 1 Lot @ Php1,164,995.22 Data Collection And Basic Device Monitoring Traffic Control Devices (controllers & Roadside Units) Traffic Control Time Based Plan Selection Adaptive Network Control Strategy Manager Strategy Manager For Traffic Actuated Plan Selection Sw Maintenance Support Bronze Profile (8x5) I) Backbone And Network Connectivity (supply And Installation Of Network Infrastructure Equipment) 1 Lot @ Php40,991,738.56 22 Pcs. Industrial Network Switch For Outdoor Control Panel @php560,696.84 = Php12,335,330.48 22 Pcs. Din Rail Poe Power Supply Industrial Grade @ Php110,524.04 = Php2,431,528.88 44 Pcs. Sfp Module For Fiber Connectivity For The Industrial Network Switch @ Php75,726.54 = Php3,331,967.76 44 Pcs. Modular Industrial Patch Panel @ Php117,721.16 = Php5,179,731.04 44 Pcs. Singlemode Lc Lc Fiber Patch Cord, 1 Meter @ Php6,653.00 = Php292,732.00 8,000 Lm. 24 Core Single Mode Os2 Fiber Optic Cable Figure 8 (outdoor) Accessories And Consummables @ Php1,381.83 = 11,054,640.00 20 Rolls Category 6 4 Pairs Stp Outdoor 305 Meters Per Roll (black) @ Php56,515.40 = Php1,130,308.00 10 Pcs. Cat6 Stp Rj 45 Connector For Outdoor / Industrial Use @ Php29,232.20 = Php292,322.00 20 Pcs. Foc Dome Splice Closure Aerial 24 Core @ Php20,267.52 = Php405,350.40 1 Unit Firewall Hw & Sw @ Php2,968,000.00 1 Lic License For Network Comunication Monitoring Software @ Php1,569,828.00 J) Supply And Installation Of Network Infrastructure Equipment (cddrmdo/ Cmo/ Pso) 1 Lot @ Php10,889,653.18 2 Pcs. Industrial Network Switch For Command Center @ Php1,300,918.62 = Php2,601,837.24 2 Pcs. Power Supply For Industrial Network Switch @ Php170,285.00 = Php340,570.00 3 Pcs. Workstation @ Php302,400.20 = Php907,200.60 3 Pcs. Ups @ Php26,880.20 = Php80,640.60 1 Pc. Indoor Comm Box @ Php65,856.20 7 Pcs. 55’’ Fhd Video Wall Display Unit (ultra Narrow Bezel 0.88mm) @ Php691,389.31 = Php4,839,725.17 7 Pcs. Bracket For 55" Screen @ Php58,095.50 = Php406,668.50 1 Pc. Decoding Card @ Php136,194.55 1 Lot Cables & Accessories @ Php60,842.10 1 Pc. Hd Network Control Keyboard @ Php234,721.72 1 Pc. Ultra Hd Network Video Decoder @ Php585,771.50 2 Pcs. 43" Fhd Monitor & Accessories @ Php240,000.00 = Php480,000.00 1 Lot Roughing In Materials For City Hall, Pso, Cdrrmc @ Php149,625.00 K) Road Signages 1 Lot @ Php304,284.00 4 Pcs. Rectangular Traffic Signages 750mmx500mm (with Post) @ Php28,493.00 = Php113,972.00 Page 3 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. 4 Pcs. Do Not Block Intersection 750mmx500mm (with Post) @ Php28,493.00 = Php113,972.00 4 Pcs. Pedestrian Crossing @ Php19,085.00 = Php76,340.00 L) Thermoplastic Pavement Markings With Directional Arrow Within 50 Meter Radius 1 Lot @ Php296,352.00 94 Sq.m. White @ Php2,016.00 = 189,504.00 53 Sq.m. Yellow @ Php2,016.00 = Php106,848.00 Page 4 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. Conditions: Scope Of Work On Interoperability Traffic Signalization System The Contractor Shall Ensure That The Proposed Traffic Controller Is Fully Interoperable With The Existing Management Platform, Traffic Modules And Traffic Detection System Currently In Use By The City Government Of General Santos. The Integration Must Facilitate Seamless Communication, Real Time Control, And Data Exchange Across The System. Cctv The Contractor Shall Ensure That The Proposed Cctv Cameras Are Fully Interoperable With The Existing Cctv Module Used By The City Government Of General Santos. The Integration Must Allow The New Cameras To Seamlessly Function With The Current Video Management Platform And Provide Real Time Monitoring, Recording, And Data Management Capabilities. Fiber Optics Network The Contractor Shall Ensure That The Proposed Fiber Optic Network Components Are Fully Interoperable With The Existing Network Infrastructure Used By The City Government Of General Santos. The Integration Must Enable The New Network Elements To Seamlessly Operate Within The Current Network Management System, Ensuring Reliable Data Transmission, Real Time Monitoring, And Efficient Communication Between Devices. The System Should Support Optimal Data Transfer Speeds, Low Latency, And Robust Network Connectivity, Contributing To The Overall Performance And Functionality Of The City’s Communication Infrastructure. Performance And Technical Specifications: 1.0) Traffic Signalization And Cctv Synchronization • Furnishing And Installing Intersection And Pedestrian Crossing Signal Systems Shall Conform To Industry Standards Commonly Accepted In One Of The Major Countries Such As The U.k., U.s.a, Europe Or Japan, Who Achieved An International Quality Standard, I.e., Iso, Ul, Etc. • The Contractor Shall Furnish And Install All Necessary Wiring, Conduits And Handholes, Between The Local Controller, Signal Heads, And Detectors. The Contractor Shall Also Switch And Install All Necessary Power Supply Wiring And Power Switch Between The Meter Box And The Local Controller Cabinet. • The Four Major Components Of The Traffic Control System Namely The Traffic Management Platform, Traffic Management Module, Traffic Controller And Traffic Signal Heads/pedestrian Lanterns Shall Be One Brand Only. However, The System Shall Be An Open Architecture/non Proprietary For Integration With Other Suppliers/manufacturers. 1.1) Traffic Signalization And Cctv Synchronization Traffic Management Platform The Platform Shall Have A High Level Framework Providing User Friendly Access To All The Its Applications Deployed In A City Or Region. Key Features Are: • Open Platform With Modular Architecture For Multiple Its Applications; • Shared Maps And Database; • A Common Gui For The Supervision And Management Of Different Its Applications; • Easy To Use Web Browser Based On Graphical Interface. 1.2) Traffic Management Module It Shall Be Able To Operate In The Following Traffic Control Mode: • Time Based Traffic Control • Traffic Actuated Plan Selection Traffic Control. • Adaptive Network Traffic Control The Traffic Management Software Shall Contain The Following Features And Functions: • System Access Login And Localization O The Platform Access Should Be Done By A Protected Login, Where The Access To The System Is Subordinated To The Verification Of The Operator Access Rights. The Authentication Shall Be Based On Three Parameters: User Name, Password And Access Level (role). O The System Shall Keep The Access (user, Password, Date, Hour Classification, Workstation) And Operation Logs. O The Platform Shall Support Multi Language. • System Configuration O The Platform Shall Allow The Configuration Of The Following Parameters: User Profile, Users And Roles, Areas And Privileges, Function And Access Levels, Fully Customizable User Profiling. • System Monitoring Module Functionalities: The Platform Shall Present The System On A Cartographic View To Help The System Operator With The Following Activities: O Device Monitoring, Interact With The Equipment On Field, O Access To Traffic Archives O Data And Measures Shall Be Displayed In A Cartographic Background (steady And Moving Objects) O Objects Icons Color Code Should Reflect Availability Status O Object Specific Applications And Commands Should Be Accessible Directly From Object Icon Page 5 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. O Fully Configurable Display Options Should Be Available • System Availability O System Availability Reports Presented In Grid Form, Connected Devices Historical Availability, System Modules Historical Availability, Report Filter And Sort, Report Print And Export • Traffic Data Archives (if Detectors Are Present) O Data Presented In Grid And Chart Forms, Historical Data Reports, Data Aggregation And Profiles, Data Report Print And Export • Data Aggregation And Profiling (if Detectors Are Present) O Automatic Aggregation Of Traffic Counts At Sections Level, Automatic Creation Of Traffic Profiles For Collected Traffic Measures • Intersection Real Time Monitoring O Real Time Signal Groups And Detectors Activity Feedback On Intersection Layout, Object Specific Applications And Commands Accessible Directly From Object Icon, Fully Configurable Display Options. • Signaling Real Time Monitoring O Real Time/playback Signal Groups And Detectors Activity Feedback, Magnifier Tool (1 Sec, 0.5 Sec And 0.1 Sec Resolution), Measurement Tool, Search Tool, Diagram Notes, Fully Configurable Display Options • Real Time Monitoring O Real Time/playback Signal Groups Feedback For Multiple Intersections O Coordination Monitoring On Both Directions • Classified Data Achieves (if Detectors Are Present) O Collection Of Classified Traffic Data, Programmable Classes • Manual Command O Scheduled And Immediate Commands, Operative Status Commands (dark, Flash, Etc.), Time Plan/time Situation Commands, Special Commands (emergency, Priority, Etc.) According Connected Device, Commands To Group Of Devices • Commands Monitoring O Sent Commands Log, Status Of The Commands (received, Acknowledge, Rejected, Etc.), Device Status Changes After Command Issuing • Alarms Notification O Sms And Email Notification, Maintenance Groups, Maintenance Areas, Fully Configurable Notification Service • Traffic Control Module Functionalities: The Its Platform Should Include The Following Functionalities: O Time Based Plan Selection. The System Determines The Signal Plan To Be Activated Basing On The Current Date And Time (calendar) O Graphical Tool For Timetable Configuration By Time Of The Day And Day Of The Week O Capability To Configure Calendar Patterns, Control Actions And Weekly Calendar O The Platform Has To Be Able To Upload And Download To/from The Traffic Controller O The Platform Has To Be Able To Program Special Control Modes Like Emergency Routes, Priority To Special Vehicles, Etc O The Platform Shall Allow The Programming Of Green Waves For Certain Corridors • System Architecture, The Its Platform Architecture Shall Include: O Map And Web Server; O Database, Application And Communication Server. O The Server Will Run The Following Basic Software: 1. Windows® Server 2016 (standard Edition) + 5cal (or Higher) Operating System; 2. Microsoft Sql® Server 2017 Standard +5cal (or Higher), As Dbms. 1.3) Traffic Signal Controller All Signal Controllers To Be Installed Under This Contract Shall Be Of The Microprocessor Type Design And Have Been Field Tested And Shown To Be Highly Reliable. It Shall Consist Of Main Cpu, Safety Cpu And Signal Group Cards On A Rack Solution. The Rack Layout Shall Have A Design That Accommodates Scalability Up To 24 Signal Groups And Interchangeability Of Group Cards. Controller Adjustment And Verification Of Programs And Timing Parameters Can Only Be Accessed Through Command Center Or An Engineer's Laptop Computer To Ensure That Only Authorized Personnel Can Have Access. Controllers Shall Have Communication Ports Rs232, Rs485, Rs422, Can, Ethernet, Usb. Controllers Shall Be Able To Run Different Types Of Lamps Or Signal Heads And Pedestrian Lanterns. It Shall Be Able To Acknowledge Devices Of Signal And Pedestrian Signal Requests From A Known Range Of Diverse Brands/suppliers. Controller Shall Be Equipped With Gps To Ensure Clock Synchronization. Page 6 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. Controllers Shall Be Able To Monitor Signal Conflicts, Mains Voltage, Mains Voltage Dip, Mains Frequency, Flash Periods, Plan Cycles, Signal State Timings, Lamp Minimum / Maximum Loads. International Commercial Warranties Must Be Provided On The Traffic Controllers. • Compatibility The Traffic Controller Shall Be State Of The Art; Non Proprietary; Shall Be Open Architecture; Shall Run A Range Of Traffic Control Philosophies And Systems; And Can Be Controlled By The World's Most Common Adaptive/external Systems Such As: O Scats O Scoot/utmc O Artic O Itaka O Ccol O Spot/utopia • Certifications O Ce Markings (includes Emc And Low Voltage Directive O En 12675: 2017 – Traffic Signal Controller, Functional Safety Requirements O En 50293: 2012 – Road Traffic Signal Systems, Electromagnetic Compatibility O En 50556: 2011 – Road Traffic Signal Systems O Iec 60950 1:2005 Cb Test Certificate O En 50581:2012 O Certificate Of Registration Topas Tr2500a • Mode Of Operation The Traffic Controller Shall Be State Of The Art And Should Be Capable Of Running Different Modes Of Operations Namely: O Central Control Mode For Road Traffic O Local Mode, Fixed Timelocal Control, Traffic Actuated O Manual Mode O Vehicle Actuated O Group Control O Phase/stage Coordination O Master/slave O Adaptive Local Green/corridor O Automatic Annual Switching Routine • Other Functional Requirements The Signal Controller Shall Be Capable Of: O Automatic Switching To Flashing Operation According To A Time Of Day (tod) Schedule And On Major Fault Conditions. O Performing Lantern Off Operation O Executing Phase Skip (or Phase Recall) And Extension Type Operations Based On Detector Actuation In Two Or More Phases • Mounting Facilities The Signal Controller Cabinet Shall Be Mounted On A Concrete Pedestal. • Terminal Panel An Insulated Terminal Panel Shall Be Provided. The Terminal Shall Be Easily Accessible And Connection Or Removal Of The Cable Shall Be Made Without Special Tools. All Panel Wiring Shall Be Neat And Firm And All Flying Leads Shall Be Clearly Identified Either By Color Or Number Code. In Either Case, Full Information Shall Be Given On The Wiring Diagram, Which Shall Be Provided To Each Complete Unit. O The Following Terminals, As A Minimum, Shall Be Provided And Clearly Identified On The Panel: § Power Supply Hot Side; § Power Supply Grounded Side; § Ground, Which Shall Be Connected To The Cabinet; § Signal Return Or Common; § Lantern Circuit Terminals; § Vehicle Detectors. O A Second Terminal Panel, Physically Separated From The First, Shall Be Supplied For Terminating Communication Cable Wiring. • Power Outlet A Fused 2 Amperes, 220 Volt Ac Power Outlet Shall Be Provided In The Signal Controller Cabinet For Maintenance And Test Equipment Use. • Controller Cabinet O The Controller Cabinet Shall Be Made Of Aluminum Metal To Provide Mechanical And Environmental Protection. The Cabinet Shall Be Weather Proof And Free From Rust. It Shall Be Made Of High Quality Sea Water Resistant Aluminum Cabinet With All The Needed Plinths, Fuses And Electrical Wiring. O The Main Door And Manual Panel Door Shall Each Be Fitted With A Different Cylinder Lock System. Page 7 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. 1.4) Signal Heads And Pedestrian Lanterns All Vehicle Signal Heads To Be Installed In This Contract Shall Be Fitted With Polycarbonate Type Visors And An Aluminum Powder Coated Target Board. Where The Material Of The Body Is Self Colored, It Need Not Be Painted If It Can Be Shown That It Will Retain The Required Color And Finish For At Least Five Years When Exposed To The Weather. All Lenses Shall Be Polycarbonate Type. All Mast Arm Mounted Signal Heads Shall Be 300mm Signal Except The Signal Attached To The Pole Section. All Pole Mounted Signal Heads Shall Be 200mm Signal. The Weight Of A Finished 3 Section Assembly With Visors Shall Not Extend 15 Kg For A 200mm Signal And 18kg For A 300mm Signal. The Signal Heads Are To Be Mounted Vertically By The Use Of Mounting Brackets Or Straps. The Minimum Height Above The Pavement To The Bottom Of The Signal Head Assembly Shall Be 3.0 Meters For A Pole Mounted Head And 5.0 Meters For A Mast Arm Mounted Head. Mounting Brackets And Attachment Facilities For Multi Head Installations Shall Provide: An Unobstructed View Of The Signal Face To The Driver On Any Intended Approach, And Sufficient Clearance So That Ready Access Is Maintained To The Interior Of Each Section Of The Signal Heads. The Mounting Arrangements Of The Signal Head Shall Be Such As To Enable It To Be Directed To A Point Located At A Height Of 1.4 Meters Within A Distance Range Of 15 To 150 Meters On The Approach To Which The Signal Is Directed. All Positioning Attachments Shall Permit The Signal Head To Be Locked In Position By A Mounting Bracket Or Equivalent Means. All Pedestrian Lanterns To Be Installed In The Project Shall Be Of Round Shape Type And Shall Be Fitted With Polycarbonate Visors. The Traffic Signal Heads And Pedestrian Lanterns Shall Be Led Type With Low Power Consumption And High Light Output. The Housing And Lens Of The Signal Head And Pedestrian Lantern Shall Be Made Of Uv Stabilized Polycarbonate And Shall Have Anti Vandal Features. The Lens Of The Signal Heads Shall Be Colored And Curved. The Housing Shall Have A Slim Design Only Built For Led Technology. The Led Module Shall Have A Central Light Source And Symbols Shall Not Change Shape In Case Of Led Failure. The Pedestrian Lantern Shall Be Smart Ready And Shall Be Able To Attach An Optional 1/2 Aspect Housing That Can Include Smart Features. • Smart Signal Head Housing O The Housing And Lens Of The Signal Head Shall Be Made Of Uv Stabilized Polycarbonate For 300mm And 200mm Diameter, The Housing Shall Have A Slim Design Only Built For Led Technology The Signal Head Shall Be Designed As A Snap Construction Without Any Metal Parts Besides The Threads For Fixing The Brackets To The Housing O Only Authorized Persons Shall Be Able To Open The Housing O Housing Color Ral 9005. O Environmental Protection Shall Be Minimum Ip54 O The Signal Head Has A Stop And A Bottom Gear Rim For The Fixing With Two Mounting Brackets To The Pole O The Mounting Brackets Shall Be Done From Polycarbonate With L Shape O Smart Functions (optional) Can Be Integrated To The 200mm Signal For 300mm Signal Heads. Head/pedestrian Lantern Housing By Attaching 1/2 Aspect Version For 200mm On Top And/or Bottom For Future Upgrades/enhancements. Optional Smart Features Are As Follows: • Ground Projection For Pedestrian Safety • Acoustic Signal For Pedestrian Orientation • Environmental Station For Measuring Air Quality • Sensors For Detecting People And Objects • Led Module O The Led Board Should Be Mounted Into An Aluminum Cooling Plate Integrated Into The Plastic Housing And Neat Losses Should Be Directly Transported Out Of The Housing. O Environmental Protection Shall Be Minimum Ip65. O Front Lens Covers To Be Tinted As Per The Aspect Color (red/yellow/green); Transparent Lenses Are Not Acceptable. O All Module Lens Diameters Shall Be 300mm And 200mm O The Design Of The Module Should Ensure Efficient Removal Of Heat From The Hermetically Sealed Casing. O Symbols For Arrows Shall Be Done By Principle As The Full Ball Using A Central Light With A Polycarbonate Dynamic Mask In Between Two Lenses. O The Leds Shall Be A Minimum 4th Generation Or Latest Generation, If Such Is Available. O The Signal Light Emitted From The Central Optical Source Should Be Homogenous, And Shall Give A Uniform Optical Signal. No Visible Dark Spots Are Allowed To Appear In The Event Of Failure Of One Or More Diodes O The Light Source Shall Consist Of No More Than Three Pieces Of High Flux Leds Combined At The Center Of The Lens. O The Led Should Be High Flux Providing A Very High Light Output And Supplied By A Special Designed Constant Current Dc Switch Mode Power Supply With High Efficiency. O Leds Distributed In The Inner Surface Of The Lens Are Not Acceptable Page 8 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. O The Luminous Intensity Issued By The Leds For The 300 Diameters Shall Exceed 400 Candelas O Phantom Class 5 According To European Norm En12368 The Electrical Connections Shall Be Of First Quality Bearing Repetitive Connections And Dismantlement O The Electrical Wires Shall Be Of First Quality, Flexible, And Shall Be Specified For A Temperature 40 Degree Centigrade Up To 65 Degree Centigrade O The Operating Voltage Of The Led Signal Head Should Be 196 To 265 Volts, 50 Hz. O The Led Semiconductor Shall Be Al Ingap For Red And Amber And Ingan For Green O Power Consumption Should Be Less Than 9w Per Aspect. O The Lifetime For The Led Shall Exceed 5 Years 1.5) Video Sensor The Sensor Shall Be Video Type With 360° View Of The Intersection. It Shall Be Above Ground, Installed At Least Nine Meters From The Ground To Avoid Being Stolen And Be Free From Damage Caused By Road Repairs And Wear And Tear From Vehicles. It Shall Be Easy To Install And Almost Maintenance Free, Requiring Only A Few Minutes Spent. It Shall Have Video Analytics Detection Detecting All Objects Including Vru (vulnerable Road User) On Crosswalk And The Center Part Of The Intersection. It Shall Be Able To Do Pedestrian Counting And Detection For Green/red Timing Extension And Eliminate The Use Of Pedestrian Push Button. It Shall Be Able To Work In Network Adaptive Mode. • Camera Technical Specification: O Single Camera Vehicle, Cyclist And Pedestrian Detection And Counting Highway Counting And Monitoring O Resolution: 5mp (2560 X 1920 Pixels) Cmos Power Over O Ethernet O Connectivity Single Cate Cable For Power And Data A O Dimensions 9.9 Diameter X 7.9"" (25 X 20.1 Cm) O Environmental: 29°f To +165°f ( 34°c To +74°c) 0 To 95% Non Condensing O Rugged Environmentally Sealed, No Aim No Focus • Edge Processor Specification O Detector /0: Ts1, Ts2, 170/2070, Or Its Interface Connectivity Wide Area Network (wan) And Built In 3g Modem O Dimensions: 8.5'" X 11.5' X 175 (206 X 29 X 4.5 Cm) O Environmental: 29°f To 165°f ( 34°c To 74°c) O Power 120/240 Vac 50/60 Hz O Consumption: 35w Nominal O Regulatory: Fcc Class A O Unlimited Cloud Storage • Software Specification O Windows Based Application O Available Reports Like Volume, Turning Movement Counts, Length Based Classification, Incidents, Red And Green Occupancy, Red And Green Arrivals, And Speed So That Users Can Monitor, Analyze, And Fine Tune An Intersection O Site Alerts (all System Events Loss Of Visibility, Flash, And Volume Exceeded) And Zone Alerts (volume Exceeded And Zone Activated By Email O Automatic Reporting By Email 1.6) Signal Intersection Wiring Ties Or Other Means Shall Support All Wiring So That No Stress Is Applied To Any Connection. No Cable Shall Exert Pressure Against Any Unprotected Edge Of Metal With Equipment In Normal Use. All Wiring Shall Be Color Coded Or Number Coded Whichever Is Applicable. 1.7) Signal Poles Furnishing And Installing Traffic Signal Poles, Footings And Foundations Shall Conform To Department Of Public Works And Highways Specifications. • Material And Loading O Type A Poles Shall Be Designed To Support On The End Of The Cantilever Section A Total Of Four (4) 3 Aspect 300mm Diameter Signal Heads, Each With A Target Board, With The Aspects Aligned Vertically Plus A 3 Aspect 200mm Signal Head On The Pole Section. O Type B, C, And D Poles Shall Be Designed To Support Three (3) 3 Aspect 200mm Diameter Signal Heads, Each With A Target Board. • Finish O All Steel Surfaces Shall Be Hot Dip Galvanized And Free From Rough Edges Or Sharp Projections. The Top Of The Poles Shall Be Sealed Off To Prevent Ingress Of Water. A Hole Or Holes Shall Be Made At The Side Of The Lowest Part Of The Pole To Allow Any Water, Which Accidentally Enters The Pole To Escape To The Exterior. O Mounting Bolts And Nuts Shall Be Adequately Treated To Resist Rust And Corrosion Either Above Or Underground. • Installation O Type B Or D Poles May Be Cast Directly In A Concrete Base (instead Of Bolted Down) If It Can Be Shown That The Required Footing For A Standard Bolt Down Type Installation Is Not Appropriate For The Site Conditions. Page 9 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. 1.8) Software And System Design Integration This System Software Will Be Installed In The Control And Command Center Building, Where It Will Communicate With All Communication Elements At The Site (signalized Intersections). To Ensure Seamless Operation Between Field Components And The System Components Inside The Command And Control Center Building, System Design And Integration Must Be Meticulously Planned And Executed. The System Software Will Interface With All Communication Elements At The Signalized Intersections, Enabling Real Time Data Exchange And Control. 1.9) Traffic Regulatory, Warning And Guide Signs Regulatory/warning/guide Signs Shall Be Installed To Complement Traffic Signals. Signs Shall Be Of Department Of Public Works And Highways (dpwh) Standard. (reference: Dpwh Highway Safety Design Standards, Part 2: Road Signs And Pavement Markings Manual) 1.10) Pavement Markings Pavement Markings Shall Be Installed To Complement Traffic Signals. Pavement Markings Shall Be Of Department Of Public Works And Highways (dpwh) Standards. (reference: Dpwh Highway Safety Design Standards, Part 2: Road Signs And Pavement Markings Manual) 2.0) Closed Circuit Television (cctv) System The System Shall Be A Stand Alone That Is Capable Of Being Linked To A Site Wide System. A Typical Cctv System For A Building Should Comprise Color Cameras, Lenses, Monitors, Pan Tilt Zoom Cameras And Controllers, And All Necessary Cables And Accessories For A Fully Functional System. The Cctv Camera Installed Shall Be Capable Of Allowing The Operator To The Following: Freeze Any Of The Cameras On The Monitor Or Bypass Any Of The Cameras; Operate The Three Functions For Each Camera Using Pan/tilt/zoom Remote Controller And Lens Remote Controller; And Zoom The Desired Areas. The Cctv Camera Installed For A Particular Purpose: For Identification: The Object Shall Be At Least 120% Of The Screen Height. The ""head Shoulder Image"" View Shall Have A Picture Quality And Detail Sufficient To Identify A Person. For Monitoring: The Object Shall Be At Least Of The Screen Height. This View Shall Be Used To Monitor The+f255 Number, Direction And Speed Of Movement Of People Or Objects Across A Wide Area. For License Plate Identification: The Displayed Image Of The Vehicle Shall Not Be Less Than 50% Of The Monitor/screen Height, For Clear Viewing/identification. 2.1) Storage Area Network 3u, Single Controller, 256ch (2mbps) Record+playback With Direct Steaming Mode, Erasure Encoding And Vraid 2.0 Technologies Ensure Data Integrity Even When 2 Hdds In A Single Raid Are Error Prone. If The Number Of Error Hdd Exceeds Redundant Limit, Other Hdds Can Still Be Read And Written, 16*18t Enterprise Hdd(sata) Included, Redundant Power Supply, Not Support Jbod Expansion 2.2) Ptz Camera O Image Sensor: 1/2.8"" Cmos O Resolution: 1920 X 1080 O Compression: H.265+/h.265/h.264+/h.264 Codec O Color: 0.005lux/f1.6, B/w:0.001lux/f1.6 O Optical Zoom: 25x, Digital Zoom:16x O 3d Dnr O True Wdr O Ultra Low Light O Poe+&12vdc O Smart Detection 2.3) License Plate Recognition Camera O Image Sensor: 1/1.8"" Progressive Scan Cmos O Image Resolution: 2688 X 1520 O 25fps/50fps O 8 32mm/5.3 13mm Motorized Zoom Lens O Color: 0.001 Lux @ (f1.2, Agc On) O Electronic Shutter Speed: 1/25 S To 1/100,000 S O Supports Slow Shutter O Supports Poe O Supports Wiegand O Video Compression: H.265/h.264/mjpeg O Sdk/isapi O Protection Grade: Ip67/ik10 O Built In White Light Or Ir 850mmled 2.4) Fixed Camera (facial Recognition) O Image Sensor: 1/1.8” 4 Megapixel Progressive Cmos O Effective Pixels: 2688 (h) X 1520 (v) O Video Compression: H.265, H.264, H.264b, Mjpeg O Rom: 4gb Page 10 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. O Ram 2gb O Ir Distance: Distance Up To 120m (393.70 Ft) O Max Aperture: F1.6 2.5) Fisheye Camera Image Sensor – 1/1.7” 12 Megapixel Progressive Scan Cmos Effective Pixels – 4000(h)x3000(v), Ram/rom – 1024mb/128mb Scanning System – Progressive Other Analytics – (40 Zones, Tamper, Shake Cancel, Surveillance, Presence, Abandoned & Removed Objects, Object Class, Calibration, Speed, Direction, Loitering + People Surveillance & Counting Lines, Color Signature (per Channel) Utility Combox With 6 Gang Extension, Mounting Materials Brackets & Plates Wall Or Pole Mount With 6” X 1.5” Gi Pipe & Stainless Strap (including Wires Royal Cord Size 18 & Stp Cables) And Services Lens Focal Length 5.4 Mm–135 Mm Max. Aperture F1.6 F3.5 Field Of View H: 58.7°–3.1°; V: 33.2°–1.7°; D: 67.3°–3.9° Optical Zoom 25x Focus Control Auto/semi Auto/manual Close Focus Distance 0.1 M–1.5 M (0.32 Ft–4.92 Ft) Iris Control Auto/manual Detect 1655 M (5429.79 Ft) Observe 657 M (2155.51 Ft) Recognize 331 M (1085.96 Ft) Identify 166 M (544.62 Ft) 3.0) Command And Control Center 3.1) Video Wall Monitor • 55*™,1080p,500cd/m, Bezelwidth:3.5mm, Direct Lit Led Backlight • Input: Vgax1/dvix1/dpx1/hdmix1/usbx1 • Output: Dpx1/hdmix1 • Support 4k Input And Loop Up To 30 Screens With Hdmi/dp Interface • Support Vesa 3.2) Workstation • Workstation Desktop Pc With 32"" Led Monitors (6th Generation I7) W/ Win 10 Os • Cad Application Server Xeon Quad Core 2.53ghz (1333mhz, Form Factor • Eia 22"" Rack (1u), Cache Memory, Intel 3400 Chipset • Workstation Tables And Chairs • Ups 500va/, Input 230v With Lcd Display 3.3) Decoder • Supports Output: 16*hdmi/8*bnc, Input: 1*vga/1*dvi, Odd Hdmi Support 3840*2160@30hz, Decoding Capacity 24mp@30fps: 8 Ch, 12mp@20fps: 16 Ch, 8mp@30fps: 32 Ch, 5mp@30fps: 48 Ch, 3mp@30fps: 80 Ch, 1080p@30fps/3 Mbps: 128 Ch, Max 36 Division 3.4) Keyboard • 128x64 Led Dot Matrix Screen, Ptz And Tv Wall Control, 4 Axis Joystick 3.5) Firewall • Description: 1u Rack Mount, 6xfixed Fe/ge Tx Ports, Fixed Single Psu • Port Type And Quantity: 6 X Fixed Fe/ge Tx Ports, 2 X Usb, 1 X Rj45 Console Port Performance: 4g(firewall), 3.4g (enable Ngfw) • Connections Per Second: 68000/s (firewall), 12000/s (enable Ngfw) • Ipsec Vpn Default Tunnel: 1000 • Concurrent Connections: 1.2 Million • Power Supply: 1xfixed Redundant Psus • Operating Voltage: 100 240vac, 50 60hz 4.0) Communication Network 4.1) Fiber Optics (backbone) • 24 Core Single Mode Os2 Fiber Optic Cable Figure 8 (outdoor) 4.2) Transceiver • Transceiver: Uplink From Access Switch To Access Switch O Compatible With The Ieee 802.3z 1000base Lx Standard, Operates On Standard Single Mode Fiber Optic Link Spans Of Up To 10 Km And Up To 550 M On Any Multimode Fibers • Transceiver: Uplink From Access Switch To Distribution Switch To Core Switch O Supports A Link Length Of 10 Kilometers On Standard Single Mode Fiber (smf, G.652). 4.3) Access Switch Page 11 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. • Built For Harsh Environment And Temperature Range ( 40° To 75°c). • Every Unit Is Conformal Coated. • Hardened For Vibration, Shock, Surge, And Electrical Noise Immunity • Four 10 Gigabit Or Four 1 Gigabit Ethernet Uplink Ports Provide Multiple Resilient Design Options • Complies With Multi Industry Specifications For Industrial Automation, Its, And Electrical Substation Environments. • Improves Uptime, Performance, And Safety Of Industrial Systems And Equipment Compact 1 Rack Unit Design With Dual Led Feature Allowing Easy Monitoring And Troubleshooting Even When Reverse Mounting Based On Cabling Requirements. • Fanless, Convection Cooled With No Moving Parts For Extended Durability. • Ieee 1588v2 Ptp (both Power Profile And Default Profile Are Supported). • Alarm 1/0 For Monitoring And Signaling To External Equipment. • Connects New Wireless Access Point (802.11n And 802.11ac). • Enables New Hd Ip Cameras. • Provide High Speed, Low Latency Connectivity For Plcs, Controllers And Associated 1/0 Devices. • Allows Supervisory Control And Data Acquisition (scada) Connectivity. • Provides Introduction Of New Bandwidth Hungry Applications In The Industrial Space. • Line Rate, Low Latency Forwarding With Advanced Hardware Assisted Features (such As Nat, Ieee1588v2). Supports Very Delay Sensitive Applications And Time Sensitive Networks. • Delivers Multiple Rings And Redundant Ring Topology For New Network Configurations. • Extends Geographical Scalability Where Longer Distance Connectivity Is Required. 4.4) Distribution Switch And Core Switch • Intel® 2.4 Ghz X86 Cpu With Up To 120 Gb Of Usb 3.0 Or Up To 960 Gb Of Sata Ssd Storage For Container Based Application Hosting • Up To 6.4 Tbps Switching Capacity With Up To 2 Bpps Of Forwarding Performance • Up To 32 Nonblocking 100 Gigabit Ethernet Qsfp28 Ports • Up To 32 Nonblocking 40 Gigabit Ethernet Qsfp+ Ports • Up To 48 Nonblocking 25 Gigabit Ethernet Sfp28 Ports • Up To 48 Nonblocking 10 Gigabit Ethernet Sfp+ Ports • Platinum Rated Ac/dc Power Supplies • Up To 512,000 Flexible Netflow (fnf) Entries In Hardware • Up To 36 Mb Of Unified Buffer Per Asic • Up To 212,000 Routing Entries (ipv4/pv6) For High End Campus Core And Aggregation Deployments • Ipv6 Support In Hardware, Providing Wire Rate Forwarding For Ipv6 Network • Ieee 802.1ba Av Bridging (avb) Built In To Provide A Better Av Experience Through Improved Time Synchronization And Qos • Precision Time Protocol (ptp; Ieee 1588v2) Provides Accurate Clock Synchronization With Sub Microsecond Accuracy, Making It Suitable For Distribution And Synchronization Of Time And Frequency Over The Network • Dual Stack Support For Ipv4/ipv6 And Dynamic Hardware Forwarding Table Allocations, For Ease Of Ipv4 To Ipv6 Migration • Support For Both Static And Dynamic Nat And Port Address Translation • Scalable Routing (ipv4, Ipv6, And Multicast) Tables And Layer 2 Tables • Highest Wireless Scale For Wi Fi 6 And 802.11ac Wave 2 Access Points Supported On A Single Switch • Support For Aes 256 With The Powerful Macsec 256 Bit Encryption Algorithm Available On All Models • Trustworthy Solutions: Secure Unique Device Identification (sudi) Support For Plug And Play, Enabling Tamper Proof Device Identity Capability, Which Secures Zero Touch Provisioning By Allowing Your Device To Show A Certificate To The Server To Be Able To Get Onto Your Network Note: > The Bidding Must Be Complete Bid And Lot Base > Upon 30% Accomplishment Allowed For Progressive Billing Page 12 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. The Local Government Unit Of General Santos City Now Invites Bids For The Supplies And Delivery Of Procurement Of Traffic Signalization And Cctv Synchronization. Delivery Of The Goods Is Required 180 Calendar Days. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders) Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non Discretionary "pass/fail" Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. Prospective Bidders May Obtain Further Information From Local Government Unit Of General Santos City And Inspect The Bidding Documents At The Address Given Below During Monday To Friday, 8:00 Am To 5:00 Pm Except On Holidays. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders Starting March 1, 2025 12:00 Noon From The Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 75,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Either In Person, By Facsimile, Or Through Electronic Means. The Local Government Unit Of General Santos Will Hold A Pre Bid Conference On 3/10/2025 10:00:00am At Bids And Awards Committee Office 4th Floor, Left Wing, City Action Investment Center, General Santos City, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before March 24, 2025 9:00 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On March 24, 2025 10:00 Am At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders Representatives Who Choose To Attend The Activity. Page 13 Of 14 25cb Gsc 146 *25cb Gsc 146* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production The Local Government Unit Of General Santos City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: _______________________________ Atty. Francisco M. Gacal Chairperson, Bac Goods And Consulting Services

Description: CATEGORY: Professional Painting Service - Walls; Interior Walls, Exterior Walls, Wall Painting; NA

Description: CATEGORY: Chair as per Sample , Central Table as per sample , Size Table with Golden Finish , Wall Unit as per sample , Wooden Wall Hanging , Desk-mounted Broadcast Microphone ISI , Podmic Dynamic Podcasting Microphone ISI , Cables , Traditional musk , BookShall with Books , Artificial Flower with base , Acoustic Carpet , Wall panelling with ply,laminate , Painting of wall with all materials , Wire Make- KEI, RICHA, HAVELLS,POLYCAB , Lamp shade , Cocept frame as per sample , Wall hanging as per sample , Flower pot as per sample , 6A 3 Pin Plug Top ISI Marke Make- Anchor, Havells , 6A 1 Way Switch Make-Anchor, Havells , 16A Socket Make- Anchor, Havells,

Description: Painting And Marking The Sides Of The Main Asphalt Roads Of Hassan City To Facilitate The Devotees Arriving On The Occasion Of The Hassanamba Jatra Mahothsava

Description: Construction Of Park Near Kabettu Stp And Painting To Playthings And Grills Of Banglegudde Park In Karkala Tmc Limit