Tenders of Offizielle Bezeichnung Wetteraukreis Fachbereich Bildung Und Geb Udewirtschaft

Public tender Vob/a General building description The Saalburg School in Bad Vilbel is an all-day primary school. It is housed in two buildings. The construction work is being carried out on the new building, which consists of a ... More general building description The Saalburg School in Bad Vilbel is an all-day primary school. It is housed in two buildings. The construction work is being carried out on the new building, which consists of a 2-storey structure with offset shed roofs. The addition of a barrier-free elevator is planned for the building. The elevator, with a platform size or an internal cabin dimension of approx. 1.10 x 1.40 m, is to be placed next to the main entrance to the building and in front of the existing external wall. The work will be carried out while the school is in operation. Trade description: Platform lift in accordance with the Machinery Directive 2006/42/EC and EN 81-41, for outdoor use. Self-supporting steel shaft with fastening in the pit, on the building and provided with shaft-enclosing rings to stabilize the shaft in order to be able to absorb wind loads. The shaft is lined with panel boards on all four sides. The steel shaft in the outdoor area has a surface treatment based on a cathodic epoxy electrocoat technology with zinc phosphating followed by powder coating. Motor/drive operating data: Approx. 2.0 kW, soft start - soft stop Location of the drive location of the lift: In the shell - outer shaft - on the right when viewed from the outside Load-bearing capacity: At least. 400 kg or 5 people Control: Microprocessor-controlled single-button request control, destination selection control Mains connection: 230 V AC, 50 Hz, frequency controlled, Design: For approx. 2000 trips/month with very low/low load according to Amev Travel height: Approx. 3380 mm Number of stops: 2 Number of elevator doors: 2 - sliding doors Door arrangement: Two-sided, side, on opposite sides - through-loading function on different floors Elevator door dimensions: Width approx. 900 mm, height approx. 2000 mm Design of elevator shaft: Closed, made of metal composite panels, including the associated. System supporting structure Platform size of elevator: Clear width: Min. 1,100 mm, clear depth Min. 1,400 mm External elevator shaft dimensions: Width approx. 1,670 mm, depth approx. 1,825 mm, height approx. 6,000 mm Elevator shaft head height: Approx. 2,500 mm (above ground floor) Elevator shaft pit depth/floor recess: Approx. 120 -140 mm Shell - outer shaft floor: Cement screed on separating layer (PE film) thickness approx. 90 mm, reinforced, on reinforced concrete foundation slab thickness approx. 300 mm Shell - outer shaft floor coating: Oil pan floor coating system on dispersion basis, incl. All-round joints and base coating Planned execution period: Elevator production - from week 9/2025 Assembly - week 21/2025 Please note that no bidder questions can be answered between Friday, December 20, 2024 and Friday, January 3, 2025 inclusive due to the closure of the Wetterau district administration. All bidder questions received during this period will be answered thereafter. Platform lift in accordance with the Machinery Directive 2006/42/EC and EN 81-41, for outdoor use. Self-supporting steel shaft with fastening in the pit, on the building and provided with shaft-enclosing rings to stabilize the shaft in order to be able to absorb wind loads. Shaft cladding with panel boards on all 4 sides. The steel shaft in the outdoor area has a surface treatment based on a cathodic epoxy electrocoat technology with zinc phosphating followed by powder coating. Motor/drive operating data: Approx. 2.0 kW, soft start - soft stop Location of drive location of elevator: In the shell - outer shaft - right when viewed from the outside Load capacity: At least 400 kg or 5 people Control system: Microprocessor-controlled single-button request control, destination selection control Mains connection: 230 V AC, 50 Hz, frequency-controlled, Design: For approx. 2000 trips/month with very low/low load according to Amev Travel height: Approx. 3380 mm Number of stops: 2 Number of elevator doors: 2 - sliding doors Arrangement of doors: Two-sided, side, on opposite sides - through-loading function on different floors Door dimensions of elevator: Width approx. 900 mm, height approx. 2000 mm Design of elevator shaft: Closed, made of metal composite panels, including the associated. System supporting structure Platform size of elevator: Clear width: Min. 1,100 mm, clear depth Min. 1,400 mm External elevator shaft dimensions: Width approx. 1,670 mm, depth approx. 1,825 mm, height approx. 6,000 mm Elevator shaft head height: Approx. 2,500 mm (above ground floor) Elevator shaft pit depth/floor recess: Approx. 120 -140 mm Shell - outer shaft floor: Cement screed on separating layer (PE film) thickness approx. 90 mm, reinforced, on reinforced concrete foundation slab thickness approx. 300 mm Shell - outer shaft floor coating: Oil pan floor coating system on dispersion basis, including all-round joints and base coating.