Office Furniture Tenders

Description: Description Of Requirement office Furniture recruiting Substations - Puerto Rico 1.0 Purpose: Office Furniture Items Will Be Used To Furnish The Recruiting Substation Offices In Puerto Rico 2.0 Description Of Items: The Following Items Are Required In Accordance With The Specifications Provided Below. 2.1 Workstations: 2.1.1 Recruiter Chair, Black Or Silver standards: Offered Product Shall, At A Minimum, Meet The Ansi/bifma X5.1-2017 “general-purpose Office Chairs - Tests”, And California Technical Bulletin 133 “flammability Test Procedures For Seating” Standards. description: Mid Back Task Chair With Cushioned Fabric Seat And Mesh Back. Fabric And Mesh Must Be Black In Color. Task Chair Must Swivel 360 Degrees And Have Pneumatic Seat Height Adjustments With Adjustable Armrests. Base Must Have Five-prongs With Casters. Preferred Color Of Exposed Metal Is Black; A Silver Finish Is An Acceptable Alternative. dimensions: overall, Height: 37-42 Inches seat Height: 16-21 Inches seat Size: 20 Inches Wide X 20 Inches Deep back Size: 23 Inches Wide X 23 Inches High note: This Item Is Subject To And Must Comply With The Berry Amendment. 2.1.2 Visitor Chair, Black standards: Offered Product Shall, At A Minimum, Meet The Ansi/bifma X5.4-2012 “lounge And Public Seating - Tests”, And California Technical Bulletin 133 “flammability Test Procedures For Seating” Standards. description: Side Chair With Sled Style-leg Frame In Minimum 16 Gauge Metal And Armrests. Mesh Seat Pan With Mesh Seat Back. Any Fabric, Mesh And Exposed Metal Surfaces Must Be Black In Color. Must Be Stackable To A Minimum Of Four (4) Chairs High. note: Following Physical Training, The Intent Is To Provide Chairs For Poolees And/or Marines That Are Sweating To Sit In A Chair That Dries Quickly And Sufficient Ventilation To Reduce The Risk Of Smell. dimensions: overall Height: 34 Inches seat Height: 18 Inches seat Size: 20 Inches Wide X 17 Inches Deep back Size: 18 Inches Wide X 15 Inches High note: This Item Is Subject To And Must Comply With The Berry Amendment. 2.1.3 Work Desk (sncoic), Black/gray standards: Offered Product Shall, At A Minimum, Meet The Ansi/bifma X5.5-2014 “desk/table Products – Tests” Standards. description: Freestanding, L-shaped Peninsula Work Desk 72 Inches Wide By 60 Inches Deep With Capability To Add A Keyboard Tray. Peninsula Must Be Detachable, Reversible Between A Left And Right L-shaped Work Desk, And Must Provide Leg Clearance From Both Sides Of The Peninsula. Metal Frame Construction With Black Powder Coat Finish And Leveling Capability. All Work Surfaces Must Be Gray Laminate (grade A) With A Minimum Of One (1) Wire Grommet Per Work Surface (return & Peninsula). dimensions: no Size Variances Will Be Accepted For The Desk. overall Layout: 72 Inches Wide X 60 Inches Deep (return/peninsula May Not Exceed This Footprint) desk Height: 30 Inches desk Depth: 24 Inches 2.1.4 Work Desk, Nco Station, Black/gray standards: Offered Product Shall, At A Minimum, Meet The Ansi/bifma X5.5-2014 “desk/table Products – Tests” Standards. description: Freestanding, L-shaped Peninsula Work Desk 66 Inches Wide By 42 Inches Deep With Capability To Add A Keyboard Tray. Peninsula Must Be Detachable, Reversible Between A Left And Right L-shaped Work Desk, And Must Provide Leg Clearance From Both Sides Of The Peninsula. Metal Frame Construction With Black Powder Coat Finish And Leveling Capability. All Work Surfaces Must Be Gray Laminate (grade A) With A Minimum Of One (1) Wire Grommet Per Work Surface (return & Peninsula). dimensions: no Size Variances Will Be Accepted For The Desk. overall Layout: 66 Inches Wide X 42 Inches Deep (return/peninsula May Not Exceed This Footprint) desk Height: 30 Inches desk Depth: 24 Inches 2.1.5 Work Desk Monitor Arm, Sncoic/nco Station, Black description: Single Screen Monitor Arm That Mounts To The Sncoic/nco Work Desk With 360 Degree Swivel And Tilt Capability, Universal Vesa Plate Mounting System, And Supports Monitors Up To 25 Lbs. dimensions: width: 3 Inches depth: 24 Inches height: 24 Inches 2.1.6 Mobile Pedestal Without Seat Cushion, Sncoic/nco Station, Black description: Mobile Pedestal Constructed With Minimum 20 Gauge Metal In A Black Powder Coat Finish Matching The Metal Frame Of The Sncoic/nco Work Desks. Pedestal Must Be Mobile With Lockable Casters. Must Contain Two 6” Box Drawers And One 12” File Drawer, Counterweight, And A Pencil Tray. All Drawers Must Be Lockable. dimensions: width: 15 Inches depth: 22 Inches height: 27 Inches (must Fit Under Work Desk) 2.1.7 Mobile Pedestal With Seat Cushion, Sncoic/nco Station, Black description: Mobile Pedestal Constructed With Minimum 20 Gauge Metal In A Black Powder Coat Finish Matching The Metal Frame Of The Sncoic/nco Work Desks. Pedestal Must Be Mobile With Lockable Casters. Must Contain Two 6” Box Drawers And One 12” File Drawer, Counterweight, And A Pencil Tray. All Drawers Must Be Lockable. dimensions: width: 15 Inches depth: 22 Inches height: 27 Inches (must Fit Under Work Desk) 2.1.8 Desk Lamp Sncoic/nco Station, Black description: Desk Lamp Should Be Black In Color, Led-200 Lumens, Black Shade Covering The Bulb Should Be Of A Metal Type Material. The Lamp Should Have The Capability To Be Positioned At Various Locations On The Desk And To Adjust The Height As Needed. 2.1.9 Work Desk, Testing Area, Black/ Gray standards: Offered Product Shall, At A Minimum, Meet The Ansi/bifma X5.5-2014 Or Ansi/bifma X5.5-2021, “desk/table Products – Tests”. description: Freestanding, Metal Frame Construction With Black Powder Coat Finish And Leveling Capability. All Work Surfaces Must Be Gray Laminate (grade A) With A Minimum Of One (1) Wire Grommet. dimensions: height: 30 Inches width: 42 Inches depth: 24 Inches 2.2 Lounge Area 2.2.1 Sofa, Lounge Black standards: Offered Product Shall, At A Minimum, Meet The Bifma/ansi X5.4-2012 “lounge And Public Seating - Tests”, And California Technical Bulletin 133 “flammability Test Procedures For Seating” Standards. description: Three-seat Sofa With Armrests. Clean, Unadorned Basic Design Appropriate To A Standard Business Environment In Black Fabric And Must Be Stain And Scratch Resistant. Seat Cushions Must Be Detachable And Reversible. Minimal Or No Exposed Wood Or Metal; Any Visible Wood Or Metal Must Be Black. Styles With Particular Theme Are Not Acceptable (e.g. “antique” Or “country”). design/fabric/color Must Match Loveseat And Lounge Chair. fabric Must Exceed 200,000 Double Rubs. dimensions: width: 82 Inches depth: 35 Inches max Ground Clearance Is 2 Inches. note: This Item Is Subject To And Must Comply With The Berry Amendment. 2.2.2 Loveseat, Lounge Black standards: Offered Product Shall, At A Minimum, Meet The Ansi/bifma X5.4-2012 “lounge And Public Seating - Tests”, And California Technical Bulletin 133 “flammability Test Procedures For Seating” Standards. description: Two-seat Loveseat With Armrests. Clean, Unadorned Basic Design Appropriate To A Standard Business Environment In Black Fabric And Must Be Stain And Scratch Resistant. Seat Cushions Must Be Detachable And Reversible. Minimal Or No Exposed Wood Or Metal; Any Visible Wood Or Metal Must Be Black. Styles With Particular Theme Are Not Acceptable (e.g. “antique” Or “country”). design/fabric/color Must Match Sofa And Lounge Chair. fabric Must Exceed 200,000 Double Rubs. dimensions: width: 60 Inches depth: 35 Inches max Ground Clearance Is 2 Inches. note: This Item Is Subject To And Must Comply With The Berry Amendment. 2.2.3 Chair, Lounge, Black standards: Offered Product Shall, At A Minimum, Meet The Ansi/bifma X5.4-2012 “lounge And Public Seating - Tests”, And California Technical Bulletin 133 “flammability Test Procedures For Seating” Standards. description: Lounge Chair With Armrests. Clean, Unadorned Basic Design Appropriate To A Standard Business Environment In Black Fabric And Must Be Stain And Scratch Resistant. Seat Cushions Must Be Detachable And Reversible. Minimal Or No Exposed Wood Or Metal; Any Visible Wood Or Metal Must Be Black. Styles With Particular Theme Are Not Acceptable (e.g. “antique” Or “country”). design/fabric/color Must Match Sofa And Loveseat. fabric Must Exceed 200,000 Double Rubs. dimensions: width: 35 Inches depth: 35 Inches max Ground Clearance Is 2 Inches. note: This Item Is Subject To And Must Comply With The Berry Amendment. 2.2.4 Media Stand, Lounge, Black description: The Support Stand For The Flat Screen Television (must Support A Tv Up To 42 Inches) And The Media Player Will Be Of Steel Frame And Grade A Laminate Wood Construction With All Exterior Surfaces Black In Color. Added Features Such As Compartments For Storing Remote Controls, Cords And Accessories Are Preferable And Will Be Evaluated Favorably But Are Not Required. Drawers Or Doors Used To Provide Out-of-site Storage Must Have Silver Metal Handles Or Knobs. dimensions: maximum- Width: 48 Inches Depth: 20 Inches Height: 31 Inches minimum- Width: 42 Inches Depth: 18 Inches Height: 20 Inches 2.2.5 Coffee Table, Lounge, Black description: Coffee Table With Metal Frame And Laminate Top Construction With All Exterior Surfaces Black In Color. Must Be A Sturdy, Clean, And Unadorned Design Appropriate To A Standard Business Environment. Must Be Stain And Scratch Resistant. Must Support Up To 250 Pounds. dimensions: maximum- Width: 30 Inches Length: 48 Inches Height: 20 Inches minimum- Width: 24 Inches Length: 36 Inches Height: 16 Inches 2.2.6 Brochure Rack (small), Lounge, Black description: Floor Standing Literature Rack With Removable Dividers That Support The Display Of Both 4 Inch Wide Brochures And 8.5 X 11 Inch Literature. Aluminum Or Equal Material Construction With All Visible Exterior Surfaces In A Black Powder coat Finish. Dividers Should Be 0.125 Inch Thick Clear Acrylic Allowing Visibility Of Literature. dimensions: height: 50 Inches depth: 12 Inches width: 12 Inches 2.2.7 Brochure Rack (large), Lounge, Black description: Floor Standing Literature Rack With Removable Dividers That Support The Display Of Both 4 Inch Wide Brochures And 8.5 X 11 Inch Literature. Aluminum Or Equal Material Construction With All Visible Exterior Surfaces In A Black Powder Coat Finish. Dividers Should Be 0.125 Inch Thick Clear Acrylic Allowing Visibility Of Literature. dimensions: height: 50 Inches depth: 12 Inches width: 30 Inches 2.3 Miscellanous Items 2.3.1 Vertical 4 Drawer File Cabinet, Black standards: Offered Product Shall, At A Minimum, Meet The Ansi/bifma X5.9-2012 “storage Units – Tests” Standards. description: 18 To 22 G. Steel Construction; Central Lock; Adjustable Folder Rails; Adjustable Leveling Glides; Counterweight Included; Drawer Fronts Flush With Integral Pull; The Back Of The File Is Finished; Drawers Open To Their Full Depth; Shipped Fully Assembled. dimensions: Width: 16.75 Inches X Depth: 24 Inches X Height: 55.75 Inches 2.3.2 Lateral 2 Drawer File Cabinet, Black standards: Offered Product Shall, At A Minimum, Meet The Ansi/bifma X5.9-2012 “storage Units – Tests” Standards. description: 18 To 22 G. Steel Construction; Central Lock; Adjustable Folder Rails; Adjustable Leveling Glides; Counterweight Included; Drawer Fronts Flush With Integral Pull; The Back Of The File Is Finished; Drawers Open To Their Full Depth; Shipped Fully Assembled. dimensions Width: 36 Inches X Depth: 18 Inches X Height: 27 Inches 2.3.3 Locker, Black description: 18 Gauge Or Thicker Sheet Steel Construction; Zinc Or Chrome Plated Forged Steel Hooks, Latches And Hardware; Ventilation Via Louvered Doors. Provide A Shelf 9” From The Top Of The Locker With Four Sides Formed To 90 Degrees. Must Have Hanging Hooks And Rod. dimensions: width: 15 Inches depth: 18 Inches height: 60 Inches note: Locker Shall Not Have Legs Attached To The Bottom. 3.0 Delivery And Installation Requirement: Execute Shipping, Delivery, And Installation (assembly & Set Up) In 3 Locations. Contractor Shall Dispose Of All Packing Materials. . Recruiting Substation San Juan san Patricio Plaza Planta Baja Local F-17 guaynabo, Pr 00968 . Recruiting Substation San Juan Meps 15 2nd Street Suite 310 guaynabo, Pr 00968 . Recruiting Substations Ponce 2070 Ave Rafaeal Space Coredeo ponce, Pr 00731 4.0 Warranty Requirement: Provide A Warranty That Is The Same As The Manufacturer’s Warranty For Each Item. In The Event Of A Warranty Claim, The Contractor Shall Work With The District Supply Officer And The Regional Contracting Office (rco) – Parris Island, Sc To Coordinate The Repair Or Replacement Of Defective Furniture. 5.0 General Information: All Goods To Be Delivered Under This Requirement Are Subject To The Restrictions Of The Buy American Act And The Nonmanufacture Rule, Certain Goods To Be Delivered Under This Contract Are Subject To The Berry Amendment.

Details: Description Item No. Unit Item Description Quantity Unit Cost Total Cost 1 Month General Services - School Utility 12 6,000.00 72,000.00 To Take Charge Of The Maintenance Of The Classrooms&offices Cleanliness And Orderliness, Furniture (desks, Tables,&chairs), School Ground, School Comfort Rooms, Plants (planting&watering), Gulayan Sa Paaralan Area, Math&science Garden, Heroes Park, Water Connection, Electrical Connections, And Landscaped Areas.

Details: Description Items Quantity / Units 1 Monthly Comprehensive Termite Control Preventive Maintenance And Pest Control Preventive Maintenance Scope Of Work: 1. The Contractor Shall Furnish The Pcch Labor, Supplies And Materials And All Necessary Tools And Equipment In The Pest And Control Services Of Its Above Mentioned Building, As Follows: A. General Termite Treatment - Thorough Inspection Of The Building / Area To Pinpoint Termite Colonies, If Any. - Chemical Treatment Barriers / Soil Treatment Or By Baiting System Of The Perimeter Area Of The Building With A Distance Of 18-20 Inches Apart And About 6 Inches Close To The External Wall Of The Building. This Must Include Mound Demolition, Drilling For Cemented Area And Use Of Soil Injectors (for Compacted Soil). Drilled Holes Shall Be Covered With Cement After The Treatment, If Necessary. (submit List Of Chemicals To Be Used) - Treatment Of The Infestation Inside The Building By Injecting Termiticide Solution Or Baiting System In The Affected Areas. (submit List Of Chemicals To Be Used) - Treatment Of All Wooden Cabinetry Materials, Doors, Door Jambs, Electrical Boxes, Double Walling, Windows And The Like.. (submit List Of Chemicals To Be Used) - Conduct Of Monthly Inspection / Maintenance Services, Including Immediate Re-application Of Termiticide Solution Or Baiting System Whener Necessary. B. General Pest Control - Contact Spraying - Using Compact Pressure Sprayer Containing Insecticides Spray Solutions With Either Contact Or Residual Actions, Surface Spraying Will Be Conducted On Infested And General Areas Where There Is Only Minimal Danger Of Contamination. (submit List Of Chemicals To Be Used) - Rodent Control - Installation Of Traps And Replacement Of Ant-coagulants In Secluded Areas. (submit List Of Chemicals To Be Used) - Thermal Fogging - Fogging The Surroundings And Premises Of The Pcch Building With High Knockdown Insecticides Carried In Oil Be Performed Once A Week. (submit List Of Chemicals To Be Used For Particular Locations) - Misting Of Offices - Misting Of Offices Of The Entire Pcch Building With Fast Knockdown And Long Residual Action Shall Be Treated Once A Week. (submit List Of Chemicals To Be Used) - Gel Bait Application - As A Complimentary Treatment Method, Gel Baits Will Be Placed On Heavily Infested Areas. In Spray Banned Areas, Gel Baits Are Most As Effective As Any Other Treatment Procedures Mode For Control Of Cockroaches And Crawling Insects. (submit List Of Chemicals To Be Used) - Pest Control Treatment Of Cockroach, Mosquitos, Flies And Other Crawling And Flying Insect; Rat And Mice Control. - Residual Insecticidal Spraying (thermal Fogging/misting) Weekly Spray All Floor Drains At Kitchen Area, Bathrooms; Store Rooms, Conference Rooms, Ornamental Plants And Other Areas Where Drain Pose A Potential Harbourage. Must Be Odourless And Non-staining, Application Of Insecticide In Places And Areas Where Insects/pest Congregate, Crawl And Hide Including Cracks And Crevices Where They Enter As Well As Undersides Of Furniture And Appliances. - Application Of Insecticidal Bait/gel Near Harbourage And Aggregation Areas, Such As Corners Of Movement, Electrical Wirings, Telephone Apparatus, Etc. Using Advanced And Delivery System Gel Abatement. - General Survey And Thorough Inspection Of The Entire Premises To Determine The Location Of Other Unforeseen Breeding Sites Of Flying Insects. - Spraying / Misting Of Larvicideds Areas Where Mosquitoes Including Adult Flies And Other Small Flying Insects Take Refuge, And Immediate Cleaing Of Office Furniture And Equipment That Were Affected By The Chemicals. Solutions Used In Spraying /misting. 1 Lot Price Quotation/s Should Be Printed On Company’s Official Letterhead Together With The Following Updated Documents; -mayor’s/business Permit -philgeps Registration Number -income/business Tax Return -accomplished And Notarized Omnibus Sworn Statement (https://www.gppb.gov.ph/assets/forms/omnibus%20sworn%20statement (revised).docx) -proof Of Authorization: Secretary’s Certificate If Corporation, Or Special Power Of Attorney, If Individual __________________________________________________________________________________ Note: To Be Submitted Sealed And Labeled On A Long Brown Envelope, Following This Format As Follows: __________________________________________________________________________________ For: Atty. Josephine C. Lati-bagaoisan Bac Chairperson Thru: Atty. Bea Therese P. Villanueva Officer In Charge, Procurement Management Office 4th Floor, Pasig City Hall, Caruncho Avenue, Pasig City Date :____________________ Company’s Name :____________________ Philgeps Reference Number :____________________ Project Title :____________________

Details: Description Janitorial Services Days Worked Per Week (monday-friday)- 5 Days/weekday Worked Per Month – 22days Number Of Days/year’s Excluding Saturday, Sunday & Holidays– 8hrs Work/day Amount Directly To Janitor/janitress (new Daily Wage)- 385.00 Ave. Pay/month (₱385.00 X 22 Days) = 8,470.00 13th Month Pay (8,470.00 / 12) = 705.83 5 Days Incentive With Pay (₱385.00 X 5 / 12) = 160.42 Uniform Allowance = 100.00 Total Amount Directly To Janitor/janitress - ₱9,436.25 Amount To Gov’t In Favor Of Janitor/janitress = ₱2,036.88 Sss Premium, (employer’s Share) = ₱855.00 Philhealth Premium (employer’s Share) = ₱250.00 Ecc/state Insurance Fund = ₱10.00 Pag-ibig Fund = ₱200.00 Retirement Benefits (ra 7641) = ₱721.88 C. Total Amount To Janitor/janitress & Gov’t (a+b) = ₱11,473.13 D. Agency Fee/profit Margin 10% Of A = ₱1,147.31 E. Vat (agency Fee X 12% Rmc-039-20-07) = ₱137.68 F. Contract Rate/janitor/janitress/month = ₱12,758.12 G. No. Of Janitors: 34 H. No. Of Months: 5 Months And 10 Days Duties And Responsibilities Of Janitor/janitress Daily Routine Operations: A. Sweeping, Mopping, Spot Scrubbing And Polishing Of Floors (lobbies, Hallways And Stairs). Areas Where Heavy Traffic Occur, Including The Main Lobby, Entrance Ways, Waiting Areas, And Comfort Rooms, Shall Be Serviced Continuously During Hours Of Public Use To Always Guarantee Cleanliness. B. Cleaning, Sanitizing Of Toilets And Rest Rooms, With The Use Of Effective Disinfecting Chemicals On Washbasins, Urinals And Toilet Bowls; Fogging Of Toilets And Hallways With Deodorant. C. Dusting And/or Damp Wiping Of Glass Tops, Glass Doors, Counters Furniture, Partitions, Sidings And Doors. D. Dusting Of Inside Windows, Window Ledges, Air Vents, Stair Railings And Other Horizontal And Vertical Surfaces As Well As Bookshelves And Cabinets. E. Emptying, Cleaning Of Ash Trays And Waste Containers, Disposal Of Trash To Receptacles Provided For This Purpose And Cleaning The Same. F. Sweeping Of Driveways And Parking Areas. G. High Dusting And Removal Of Cobwebs And Finger Marks On Walls And Ceilings Whenever Necessary; H. Maintenance Of Garden And Watering Plants. I. Cleaning Of Glass Doors And Partitions. J. Frequent Spraying Of Air Freshener. K. Maintain The Cleanliness Of Other Interior Portions Of The Building. L. Switching Off Or Unplugging Water Faucets, Light Switches, Office And Other Equipment After Office Hours Or When Not In Need. M. Segregation Of Garbage N. Grass Cutting/weeding O. Watering Of Plants P. Other Services Required Within The Premises That Are Within The Scope Of Janitorial Work That Management May Assign From Time To Time. Weekly Operations: A. Washing, Scrubbing, Waxing And Polishing Of Floors And Stairways. B. Application Of Special Sanitizing And Waxing Solution To Hallways. C. Washing Windows, Doors, Frames, Partitions And Screens. D. Dusting Of Light Fixtures, Venetian Blinds And Drapes. E. Cleaning, Waxing, Washing And/or Polishing Of Office Furniture And Fixtures. F. General Cleaning Of All Comfort Rooms. G. High Dusting And Removal Of Cobwebs. H. Removal Of Stains And Finger Marks On Walls. I. Polishing Of Metal Signs. K. Shampooing Rugs, Carpets, And Draperies. J. Watering And General Care Of Indoor Plants. L. Spraying Of Insecticides Of Application Of Rodenticides Inside The Office Monthly Operations: • Agency Shall Conduct Monthly Supervisory Monitoring And Inspections. Garden Plant Maintenance: A. Regular Watering Of Plants And Garden As Well As Cleaning Of Gutters. B. Regular Trimming Of Grasses And Removal Of Dried Leaves On Plants. C. Regular Application Of Fertilizers To Plants And Gardens. D. Maintenance Of Seed Lawns Within The Designated Perimeter. E. Sweeping Of Dry Leaves And Disposal Of Trash F. Cultivation Of Plants.

Details: Description Terms Of Reference I. Project And Location To Provide Office Furniture And Workstation For The Personnel Under The Office Of The Administrator In 7th Floor, Pca Building, Quezon City Ii. Scope Of Work Quantity Image/lay-out Description Lot Modular Partiton 4.5mm Thick Aluminum Frame Beige Color With 25mm Top Laminated Finish With Pvc Edgeband Dimension : Worktop : 120x60x120x40 Panel : 120wx120hcm (fg) 120wx120hcm (ff) Modular Partiton 4.5mm Thick Aluminum Frame Beige Color With 25mm Top Laminated Finish With Pvc Edgeband Dimension : Worktop : 140x60x120x40 Panel : 120wx120hcm (ff) 140wx120hcm (ff) (recieving) Modular Partiton 4.5mm Thick Aluminum Frame Beige Color With 25mm Top Laminated Finish With Pvc Edgeband Dimension : Worktop : 180x60x170x45 Counter Top : 180wx20dcm Panel : 180wx120hcm (fg) 170wx120hcm (fg) 60wx120hcm (ff) Modular Partiton 4.5mm Thick Aluminum Frame Beige Color With 25mm Top Laminated Finish With Pvc Edgeband Dimension : Worktop : 210x60 Panel : 210wx100hcm (ff) 60wx100hcm (ff) Modular Partiton 4.5mm Thick Aluminum Frame Beige Color With 25mm Top Laminated Finish With Pvc Edgeband Dimension : Worktop : 140x60x140x45 Panel : 140wx100hcm (ff) 60wx100hcm (ff) 1 Executive Table Mdf Boar Laminated Finish Wooden Mobile Pedestal With Safety Lock Movable Long Table With Shelf And Drawer Keyboard Tray And Cpu Bin Dimension : 160wx80dx7hcm 2 Metal Cabinet Swing Glass Door Powder Coated Finish 4 Adjustable Shelves With Safety Lock Dimension : 90wx40dx185hcm 1 Linear Working Table 2seater Mdf Board Laminated Finish With Side Drawer And Safety Lock Metal Frame Dimension : 120w X60d 1 Junior Executive Table Mdf Board Laminated Finish With 3 Combination Lock Dimension : 140wx65dx75hcm 1 Executive Table Mdf Boar Laminated Finish Wooden Mobile Pedestal With Safety Lock Movable Long Table With Shelf And Drawer Keyboard Tray And Cpu Bin Dimension : 180wx80dx7hcm 1 Executive Chair Reclining Chair Faux Leather 360 Swivel Chair Aluminum Stabase Color : Black 9 Mobile Pedestal Drawer Steel Powder Coating Centralized Locking Mechanism Recessed Handle With Pen Tray And File Divider Dimension : 39w X 50d X 65hcm Iii. Other Terms And Conditions 1. The Prospective Bidders May Bid For Any Lot Or All Of The Lots Mentioned Above And Shall Submit The Following In A Sealed Envelope. A. Sec Or Dti Registration Certificate B. Mayor’s Permit Or Business Permit C. Philgeps Registration D. Prescribed Omnibus Sworn Statement (10 Items) 2. Financial Proposal And Complete Set Of Eligibility Documents Shall Be Submitted In Either Of The Following Manner From May 25 - 31, 2024, 1:00pm. A. Manual/physical Submission In A Sealed Envelope At The General Services Division’s Office, 5th Floor, Pca R&d Bldg., Diliman, Quezon City B. Via Online Or Electronic Submission At Pcaqc@yahoo.com 3. The Delivery Period From The Receipt Of Purchase Order Is 30 Calendar Days. 4. Warranty Period: 1 Year Upon Acceptance.

Details: Description Items Quantity / Units 1 Monthly Comprehensive Termite Control Preventive Maintenance And Pest Control Preventive Maintenance Scope Of Work: 1. The Contractor Shall Furnish The Pcch Labor, Supplies And Materials And All Necessary Tools And Equipment In The Pest And Control Services Of Its Above Mentioned Building, As Follows: A. General Termite Treatment - Thorough Inspection Of The Building / Area To Pinpoint Termite Colonies, If Any. - Chemical Treatment Barriers / Soil Treatment Or By Baiting System Of The Perimeter Area Of The Building With A Distance Of 18-20 Inches Apart And About 6 Inches Close To The External Wall Of The Building. This Must Include Mound Demolition, Drilling For Cemented Area And Use Of Soil Injectors (for Compacted Soil). Drilled Holes Shall Be Covered With Cement After The Treatment, If Necessary. (submit List Of Chemicals To Be Used) - Treatment Of The Infestation Inside The Building By Injecting Termiticide Solution Or Baiting System In The Affected Areas. (submit List Of Chemicals To Be Used) - Treatment Of All Wooden Cabinetry Materials, Doors, Door Jambs, Electrical Boxes, Double Walling, Windows And The Like.. (submit List Of Chemicals To Be Used) - Conduct Of Monthly Inspection / Maintenance Services, Including Immediate Re-application Of Termiticide Solution Or Baiting System Whener Necessary. B. General Pest Control - Contact Spraying - Using Compact Pressure Sprayer Containing Insecticides Spray Solutions With Either Contact Or Residual Actions, Surface Spraying Will Be Conducted On Infested And General Areas Where There Is Only Minimal Danger Of Contamination. (submit List Of Chemicals To Be Used) - Rodent Control - Installation Of Traps And Replacement Of Ant-coagulants In Secluded Areas. (submit List Of Chemicals To Be Used) - Thermal Fogging - Fogging The Surroundings And Premises Of The Pcch Building With High Knockdown Insecticides Carried In Oil Be Performed Once A Week. (submit List Of Chemicals To Be Used For Particular Locations) - Misting Of Offices - Misting Of Offices Of The Entire Pcch Building With Fast Knockdown And Long Residual Action Shall Be Treated Once A Week. (submit List Of Chemicals To Be Used) - Gel Bait Application - As A Complimentary Treatment Method, Gel Baits Will Be Placed On Heavily Infested Areas. In Spray Banned Areas, Gel Baits Are Most As Effective As Any Other Treatment Procedures Mode For Control Of Cockroaches And Crawling Insects. (submit List Of Chemicals To Be Used) - Pest Control Treatment Of Cockroach, Mosquitos, Flies And Other Crawling And Flying Insect; Rat And Mice Control. - Residual Insecticidal Spraying (thermal Fogging/misting) Weekly Spray All Floor Drains At Kitchen Area, Bathrooms; Store Rooms, Conference Rooms, Ornamental Plants And Other Areas Where Drain Pose A Potential Harbourage. Must Be Odourless And Non-staining, Application Of Insecticide In Places And Areas Where Insects/pest Congregate, Crawl And Hide Including Cracks And Crevices Where They Enter As Well As Undersides Of Furniture And Appliances. - Application Of Insecticidal Bait/gel Near Harbourage And Aggregation Areas, Such As Corners Of Movement, Electrical Wirings, Telephone Apparatus, Etc. Using Advanced And Delivery System Gel Abatement. - General Survey And Thorough Inspection Of The Entire Premises To Determine The Location Of Other Unforeseen Breeding Sites Of Flying Insects. - Spraying / Misting Of Larvicideds Areas Where Mosquitoes Including Adult Flies And Other Small Flying Insects Take Refuge, And Immediate Cleaing Of Office Furniture And Equipment That Were Affected By The Chemicals. Solutions Used In Spraying /misting. 1 Lot Price Quotation/s Should Be Printed On Company’s Official Letterhead Together With The Following Updated Documents; -mayor’s/business Permit -philgeps Registration Number -income/business Tax Return -accomplished And Notarized Omnibus Sworn Statement (https://www.gppb.gov.ph/assets/forms/omnibus%20sworn%20statement (revised).docx) -proof Of Authorization: Secretary’s Certificate If Corporation, Or Special Power Of Attorney, If Individual __________________________________________________________________________________ Note: To Be Submitted Sealed And Labeled On A Long Brown Envelope, Following This Format As Follows: __________________________________________________________________________________ For: Atty. Josephine C. Lati-bagaoisan Bac Chairperson Thru: Atty. Bea Therese P. Villanueva Officer In Charge, Procurement Management Office 4th Floor, Pasig City Hall, Caruncho Avenue, Pasig City Date :____________________ Company’s Name :____________________ Philgeps Reference Number :____________________ Project Title :____________________

Details: Description Invitation To Bid For One Lot Procurement For Office Furniture And Fixtures With Bid No. 24-04-087 1. The Cebu Normal University, Through The General Appropriation Act (gaa) 2024, And Special Trust Fund (stf) 2024, Intends To Apply The Sum Of Six Hundred Ten Thousand Nine Hundred Pesos (php610,900.00) Being The Abc To Payments Under The Contract For One Lot Procurement For Furniture And Fixtures With Bid No. 24-04-087. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Cebu Normal University Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Fifteen (15) Calendar Days Upon Receipt Of The Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Cebu Normal University And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On September 4, 2024 To September 23, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (php1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 9 6. The Cebu Normal University Will Hold A Pre-bid Conference On September 11, 2024, 2:30 P.m. At Cnu Bac Office, 2nd Floor Administration Building, Osmeña Boulevard, Cebu City And/or Through Video Conferencing Or Webcasting Via Zoom Platform Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Cnu Bac Office, 2nd Floor Administration Building, Osmeña Boulevard, Cebu City On Or Before 1:00 P.m. Of September 23, 2024. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On September 23, 2024 2:30 P.m. At The Cnu Bac Office, 2nd Floor Administration Building, Osmeña Boulevard, Cebu City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Cebu Normal University Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Atty. Stanley Sam P. Tibon Bac Secretariat Office Cebu Normal University Osmeña Boulevard, Cebu City 6000 Philippines Cnubacsec@gmail.com (+632) 254 1452 Local 141 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Www.cnu.edu.ph September 3, 2024 Dr. Allan Roy B. Elnar Bac Chairperson

Details: M& R To Non Residential Building For Satara Industrial Area ……addition And Alteration In Exiting Area Manager Office At Cfc With Interior, Partition, Work Station For New Regional Office At Satara -- 2nd Call contractors Registered In Appropriate Class With Pwd ,govt.of Maharashtra/cpwd/railway/cidco/mes/mjp And Having Experience Of Execution Of Any Type Of Civil ,electrical & Furniture Work (i.e. Office Renovation, Interior, Furniture Etc.) Costing Not Less Than Rs.9.06 Lakhs During Any Of Last Five Financial Years In Govt./semi Govt./local Bodies. The Experience Certificate Shall Be Signed By Officer Not Below The Rank Of Executive Engineer.

Details: Description Invitation To Bid (canvass Only) The Municipal Government Of Virac, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors To Apply And To Bid For The Hereunder Project/s: Name Of Contract/ Activities Brief Description Approved Budget For The Contract Mode Of Procurement 1. Repair Of Air-conditioning Unit Repair And Cleaning Of 2 Unit Aircon Pr # 101-2024-07-538 Php18,000.00 Svp 2. Officer Furniture’s & Equipment 1 Set Sala Set And Other Office Equipments Pr # 401-2024-07-564 Php136,400.00 Svp 3. Catering Services With Venue Meals And Snacks With Venue For 190 Pax Pr # 401-2024-07-565 Php114,000.00 Svp 4. Office I.t. Equipment 1 Unit Laptop, 1 Unit External Hdd & 1 Unit Printer Pr # 401-2024-07-567 Php106,000.00 Svp 5. Catering Services With Venue Meals And Snacks With Venue For 265 Pax Pr # 101-2024-07-578 Php159,000.00 Svp 6. Tokens Token (fruit & Chocolate Basket) Pr # 101-2024-07-586 Php20,000.00 Svp 7. Portable Rechargeable Trolley Speaker 1 Unit Portable Rechargeable Trolley Speaker Pr # 101-2024-08-596 Php16,500.00 Svp 8. Hardware Supplies & Materials Various Hardware Supplies And Materials Pr # 101-2024-08-603 Php189,740.00 Svp The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Pre-procurement Conference August 14, 2024 @ 2:00 P.m. 2. Publication August 16 – 22, 2024 3. Release Of Canvass August 22, 2024 4. Opening Of Canvass August 23, 2024 @ 2:00 P.m. 5. Notice Of Award August 27, 2024 6. Notice To Proceed August 28, 2024 Virac,catanduanes, August 15, 2024 For Further Information, Please Refer To: Michael O. Guerrero Senior Administrative Assistant Iii Head, Bac Secretariat Bac Office, Lgu-virac Compound, Virac, Catanduanes Engr. Jose S. Rama, Jr. Municipal Assessor Bac Chairman Noted: Samuel V. Laynes Municipal Mayor

Details: Description Invitation To Bid (canvass Only) The Municipal Government Of Virac, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors To Apply And To Bid For The Hereunder Project/s: Name Of Contract/ Activities Brief Description Approved Budget For The Contract Mode Of Procurement 1. Repair Of Air-conditioning Unit Repair And Cleaning Of 2 Unit Aircon Pr # 101-2024-07-538 Php18,000.00 Svp 2. Officer Furniture’s & Equipment 1 Set Sala Set And Other Office Equipments Pr # 401-2024-07-564 Php136,400.00 Svp 3. Catering Services With Venue Meals And Snacks With Venue For 190 Pax Pr # 401-2024-07-565 Php114,000.00 Svp 4. Office I.t. Equipment 1 Unit Laptop, 1 Unit External Hdd & 1 Unit Printer Pr # 401-2024-07-567 Php106,000.00 Svp 5. Catering Services With Venue Meals And Snacks With Venue For 265 Pax Pr # 101-2024-07-578 Php159,000.00 Svp 6. Tokens Token (fruit & Chocolate Basket) Pr # 101-2024-07-586 Php20,000.00 Svp 7. Portable Rechargeable Trolley Speaker 1 Unit Portable Rechargeable Trolley Speaker Pr # 101-2024-08-596 Php16,500.00 Svp 8. Hardware Supplies & Materials Various Hardware Supplies And Materials Pr # 101-2024-08-603 Php189,740.00 Svp The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Pre-procurement Conference August 14, 2024 @ 2:00 P.m. 2. Publication August 16 – 22, 2024 3. Release Of Canvass August 22, 2024 4. Opening Of Canvass August 23, 2024 @ 2:00 P.m. 5. Notice Of Award August 27, 2024 6. Notice To Proceed August 28, 2024 Virac,catanduanes, August 15, 2024 For Further Information, Please Refer To: Michael O. Guerrero Senior Administrative Assistant Iii Head, Bac Secretariat Bac Office, Lgu-virac Compound, Virac, Catanduanes Engr. Jose S. Rama, Jr. Municipal Assessor Bac Chairman Noted: Samuel V. Laynes Municipal Mayor