Office Furniture Tenders

Description: 12234aisf24h, 98415657, Quantity: 8.670 Mts. Scrap Condemned Unserviceable Iron- Steel Furniture Consisting Of All Types Of School, Office And Hospital Furniture, Cupboards, Chairs, Tables, Racks, Line Boxes, Cash Boxes, Frames, Stands, Ms-gi Boxes, Cash Safe Locker, Safety Locker, Benches, Almirahs, Drawers, Trays, Cots, Folding Cots, Dining Tables, Stools, Workmen Lockers, Water Filter Stands, Phone Stand, Air Cooler Stands, Compactor Storage Systems, Battery Stands, R.o Plant Ms Frame, Book Shelf, Exercise Cycles, Treadmills, Gym Equipment%u2019s, Ms Structural Medical Furniture And Hospital Furniture Like Stretchers, Foldable Stretchers, Trolleys, Wheel Chairs, Beds, Iv Stand, Racks, Adjustable Beds With Stainless Steel Side Railings And Other Furniture With Or Without Attachments Of Angles, Wheels, Strips, Plates, Wood, Foam, Cushion, Plastic And Rubber. Note- Gas And Chisel Cutting Permitted For The Purpose Of Loading Only. Location: Bin No 234a, Right Side Of Curved Road No: 1. Hsn Code- 94031010. Gst: 18 Percent On Fcm Basis. Note: - Delivery On Actual Weighment Basis Only. Special Note: - Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery, As Per Mv Act 1988

Details: Notice Of Participation In Cooperative Buying Groups In Accordance With The Canadian Free Trade Agreement (cfta) And The Comprehensive Economic And Trade Agreement (ceta), This Advertisement Is A Public Notification That Haldimand County Is A Participating Agency In One Or More Procurements Conducted By The Following Cooperative Buying Group(s): Oecm – Ontario Education Collaborative Marketplace – Www.oecm.ca Las – Local Authority Services – Www.las.on.ca Mgs – Ministry Of Government Services – Www.doingbusiness.mgs.gov.on.ca/ The Following Provides A List Of Programs/services That May Be Procured Through One Of The Buying Groups Listed Above. In Addition, Haldimand County Reserves The Right To Participate In Other Buying Group Procurements Not Identified Below, At Their Sole Discretion. Office Supplies Furniture Janitorial Services Led Retrofitting Courier Services Supply & Delivery Of Bulk Fuels Managed Print Services Collection Agencies Fleet Vehicles Mobile Devices Software Licenses

Details: The agreement shall, for successive tenders during the framework agreement period, include a comprehensive range of office furniture, environmental furniture, home-style furniture, con...

Details: Amd 001 Answer Questions ***************** Corporate Accommodations With Public Services And Procurement Canada Is Seeking A Contractor To Carry Out Office Relocation Services For Moving Offices, Workplaces, And Other Various Government Facilities, Including Office Equipment, Supplies And Furniture On An ''as And When Requested ? Basis Within The National Capital Region. This Contract Is For A Period Of Two (2) Year, With The Irrevocable Option To Extend The Term Of The Contract By Up To Three (3) Additional One (1) Year Periods. See Statement Of Work Is Attached As Annex “a”. This Rfp Contains A Security Requirement.

Details: Title: Dynamic Purchasing System For Transport Container Systems, Prefab System, Design, Service And Repair/maintenance description: Dalo Is Looking To Set Up A Dynamic Purchasing System (hereafter Dps) For Container Systems, Prefabs And Service (hereafter Cs-prefab). The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. Approved Economic Operators Will Be Participants In The Dps. When An Economic Operator Has Been Prequalified As Participant In The Dps, The Economic Operator (now Participant In The Dps) Can Submit Offers On Published Tenders In The Dps. There Is No Limit On The Number Of Economic Operators That May Join The Dps. New Economic Operators Can Also Apply To Join The Dps At Any Point During The Lifetime Of The Dps. Economic Operators Should Note However, That Admission Into The Dps Is Not A Guarantee Of Being Awarded Any Contracts, And There Is Also No Guarantee Of Volume Or Value Of Tenders In The Dps. The Dps Is Divided Into Eight Categories Where It Shall Be Possible To Buy Items And Accessories. Common Characteristics For The Container Systems Is That They Are All Corresponding To Iso Container Standards And Have A Variety Of Sizes From 10ft To 40ft With 20ft Being The Standard Size. They Are Intended For Common Iso Handling Tools And Are To Be Transported Via Road, Sea, Air And Rail - Both Nationally And Internationally With All Kind Of Goods. All Of The Container Systems In This Dps Is Ex-pected To Be Or To Be Based On Standard Commercial Products (cots). Category 1 – Standard Transport Container Systems - Used. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods Or For Donation Purposes. The Container Systems In This Category Are Used Transport Containers With A Random Color And Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short. For Immediate Transportation Demands And Fast Deployment. Category 2 – Standard Transport Container Systems - New. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods. The Container Systems In This Section Are New Transport Containers With A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short To Medium. For Immediate Transportation Demands And Fast Deployment. Category 3 - Special Transport Container Systems - New. These Container Systems Will Be Used Of The Danish Defence For Transport And Storage Of Goods That Need To Be Lashed In A Certain Way And Therefore Requires A Flexible Anchoring/lashing System That Is Beyond What A Standard Transport Container Can Accommodate. The Container Systems In This Section Are New Transport Containers Modified With Extra Anchoring Points, A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Medium To Long. Category 4 - Standard Prefab Systems. These Prefab Systems Are For Example Used For Office And Administration, Living, Living Space, Storage, Depot, Dining Rooms And Infirmary Facilities. The Prefab Systems Will Be In Different Types And In It Must Help To Provide Satisfactory Living Conditions And Support Operational, Logistical And Manage-rial Activities Over A Longer Period Of Time. The Prefab Should Have The Similar Size To An 20´iso Container With The Possible Of Connecting More Than One Together. It Should Further Be Possible To Assemble The Prefab On Site, Meaning That It Is Possible To Stack And Transport Without Exceeding The Height Of An 20´ Iso Container. Category 5 - Special Prefab Systems - Dema (danish Emergency Management Agency) Will Use This Prefab For Office, Accommodations, Kitchen, Morgue, Medical Facility Etc. Dema Is Using The Prefab Primary For Fast, Easy And Flexible Solutions For Operations In Distressed Areas Around The World. The Prefab Is Based On Light-weight Materials And Assembled With Simple Tools, Meaning That You Can Set It Up With Only A Small Group Of People In A Couple Of Hours And With No Need Of Heavy Lifting Equipment. Category 6 - Service, Repair/maintenance Of New And Old Containers - Existing Dalo Container Fleet This Category Will Be Used For Service, Repair And Maintenance Of New And Old Containers In The Fleet Of Container Systems To Secure That Operational/functional, Meets The Statutory Demands And Are Safe To Use. This Might Include: • Repair And Maintenance Services • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Electrical Services • Heating-system Services • Plumbing Services • Ventilation Services • Csc Recertification • Spareparts Category 7 – New Container Systems Design Or Modification For Existing Container Fleet This Category Will Be Used For Complete New Design, Upgrade Or Modification Of New And Old Containers. • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Components And Semi-finished Product • Installation Services (except Software) • Construction, Engineering And Inspection Services Category 8 - Accessory This Category Includes All That Is Not System Specific To The Cs-prefab. It Can Be Third Party Product That Is Not Cover By The Above 7 Categories. Examples Of Accessories To The Cs-prefab Are: Furniture (incl. Office Furniture), Furnishings, Domestic Appliances (excl. Lighting). Electrical Components And Installations Emergency And Security Equipment Surface Treatment, Paint And Colour Construction Materials And Associated Items Site Preparation Work Multi-functional Buildings Construction Work Transport Services (excl. Waste Transport) Education And Training Services

Details: Title: Dynamic Purchasing System For Transport Container Systems, Prefab System, Design, Service And Repair/maintenance description: Dalo Is Looking To Set Up A Dynamic Purchasing System (hereafter Dps) For Container Systems, Prefabs And Service (hereafter Cs-prefab). The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. Approved Economic Operators Will Be Participants In The Dps. When An Economic Operator Has Been Prequalified As Participant In The Dps, The Economic Operator (now Participant In The Dps) Can Submit Offers On Published Tenders In The Dps. There Is No Limit On The Number Of Economic Operators That May Join The Dps. New Economic Operators Can Also Apply To Join The Dps At Any Point During The Lifetime Of The Dps. Economic Operators Should Note However, That Admission Into The Dps Is Not A Guarantee Of Being Awarded Any Contracts, And There Is Also No Guarantee Of Volume Or Value Of Tenders In The Dps. The Dps Is Divided Into Eight Categories Where It Shall Be Possible To Buy Items And Accessories. Common Characteristics For The Container Systems Is That They Are All Corresponding To Iso Container Standards And Have A Variety Of Sizes From 10ft To 40ft With 20ft Being The Standard Size. They Are Intended For Common Iso Handling Tools And Are To Be Transported Via Road, Sea, Air And Rail - Both Nationally And Internationally With All Kind Of Goods. All Of The Container Systems In This Dps Is Ex-pected To Be Or To Be Based On Standard Commercial Products (cots). Category 1 – Standard Transport Container Systems - Used. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods Or For Donation Purposes. The Container Systems In This Category Are Used Transport Containers With A Random Color And Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short. For Immediate Transportation Demands And Fast Deployment. Category 2 – Standard Transport Container Systems - New. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods. The Container Systems In This Section Are New Transport Containers With A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short To Medium. For Immediate Transportation Demands And Fast Deployment. Category 3 - Special Transport Container Systems - New. These Container Systems Will Be Used Of The Danish Defence For Transport And Storage Of Goods That Need To Be Lashed In A Certain Way And Therefore Requires A Flexible Anchoring/lashing System That Is Beyond What A Standard Transport Container Can Accommodate. The Container Systems In This Section Are New Transport Containers Modified With Extra Anchoring Points, A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Medium To Long. Category 4 - Standard Prefab Systems. These Prefab Systems Are For Example Used For Office And Administration, Living, Living Space, Storage, Depot, Dining Rooms And Infirmary Facilities. The Prefab Systems Will Be In Different Types And In It Must Help To Provide Satisfactory Living Conditions And Support Operational, Logistical And Manage-rial Activities Over A Longer Period Of Time. The Prefab Should Have The Similar Size To An 20´iso Container With The Possible Of Connecting More Than One Together. It Should Further Be Possible To Assemble The Prefab On Site, Meaning That It Is Possible To Stack And Transport Without Exceeding The Height Of An 20´ Iso Container. Category 5 - Special Prefab Systems - Dema (danish Emergency Management Agency) Will Use This Prefab For Office, Accommodations, Kitchen, Morgue, Medical Facility Etc. Dema Is Using The Prefab Primary For Fast, Easy And Flexible Solutions For Operations In Distressed Areas Around The World. The Prefab Is Based On Light-weight Materials And Assembled With Simple Tools, Meaning That You Can Set It Up With Only A Small Group Of People In A Couple Of Hours And With No Need Of Heavy Lifting Equipment. Category 6 - Service, Repair/maintenance Of New And Old Containers - Existing Dalo Container Fleet This Category Will Be Used For Service, Repair And Maintenance Of New And Old Containers In The Fleet Of Container Systems To Secure That Operational/functional, Meets The Statutory Demands And Are Safe To Use. This Might Include: • Repair And Maintenance Services • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Electrical Services • Heating-system Services • Plumbing Services • Ventilation Services • Csc Recertification • Spareparts Category 7 – New Container Systems Design Or Modification For Existing Container Fleet This Category Will Be Used For Complete New Design, Upgrade Or Modification Of New And Old Containers. • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Components And Semi-finished Product • Installation Services (except Software) • Construction, Engineering And Inspection Services Category 8 - Accessory This Category Includes All That Is Not System Specific To The Cs-prefab. It Can Be Third Party Product That Is Not Cover By The Above 7 Categories. Examples Of Accessories To The Cs-prefab Are: Furniture (incl. Office Furniture), Furnishings, Domestic Appliances (excl. Lighting). Electrical Components And Installations Emergency And Security Equipment Surface Treatment, Paint And Colour Construction Materials And Associated Items Site Preparation Work Multi-functional Buildings Construction Work Transport Services (excl. Waste Transport) Education And Training Services

Details: Trade Agreement: Canadian Free Trade Agreement (cfta) Tendering Procedures: The Bidder Must Supply Canadian Goods And/or Services Competitive Procurement Strategy: Subsequent/follow-on Contracts Comprehensive Land Claim Agreement: No Nature Of Requirements: Request For Supply Arrangement (rfsa) For Office Relocation And Related Services. En578-212910/b Jiang, Kevin Telephone No. (343) 550-1630 Nature Of Requirement: The Purpose Of This Rfsa Is To Issue Supply Arrangements For Office Relocation And Related Services Located In The National Capital Region (ncr) On Behalf Of Any Government Department, Agency Or Crown Corporation Listed In Schedules I, I.1, Ii, Iii, Of The Financial Administration Act, R.s., 1985, C. F-11, On An "as And When Requested" Basis. The Requirement Is To Provide Office Relocation, Warehousing And Related Services, Which Will Include, But Not Be Limited To, The Moving Of Full Offices Suites, Office Equipment, Furniture, Computers, Workstation Systems, Files And Records, Filing Cabinets, Computer Hardware, And Other Various Government Office Related Facilities Like Boardrooms And Kitchens; Also Include Packing, Crating, Disassembling, Loading, Transporting, Unloading, Unpacking, Uncrating, Assembling And Cleanup At The End Of Each Move. Disassembling Or Assembling, Disconnecting And Reconnecting Computer Workstation Systems And Other Computer-related Systems Are Excluded From This Requirement. Here Are Some Examples Of Components Associated With The Above Systems: Monitor, Laptop, Computer Tower, Keyboard, Mouse, Desktop Printer, Network Cable, Phone, All Wires & Power Cords, Power Bars. The Supply Arrangement Has No Defined End-date And Will Remain Valid Until Such Time As Canada No Longer Considers It To Be Advantageous To Use It. The Requirement Is Solely Limited To Canadian Goods And/or Services. There Is A Security Requirement Associated With This Requirement. Delivery Date: Above-mentioned The Crown Retains The Right To Negotiate With Suppliers On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada.

Details: This Amendment Is Raised To Make Changes To Mtc 1 Of The Evaluation Criteria And Make Changes To The Rfsa Name From Esdc National Cabling, Dismantling, Installation And Staging Services (cdiss) - Request For Supply Arrangement (rfsa) To Esdc National Cabling, Dismantling, Installation, Staging And Repair Services (cdisrs) - Request For Supply Arrangement (rfsa). ********************************************************************************* Employment And Social Development Canada (esdc) Is Seeking To Create A Supply Arrangement (sa) Purchasing Tool For Prequalifying Vendors, Contractors And Professionals Across Canada For Services Including Installation, Dismantling, Moving And Packaging Of Office Furniture, Equipment, And Cabling Of Workstations And Collaborative Areas. Once Established, This Sa Will Be Used By Esdc’s Real Property Teams Across All Provinces, Territories And Regions Of Canada To Procure Services For Our Service Canada Centres, Passport Canada Offices And Back End Esdc General Office Spaces. These Services Are Being Sought Through A Supply Arrangement Which Will Start April 1, 2024, And Expire When Esdc Determines That It Is No Longer Advantageous. A Request For Supply Arrangements (rfsa) Will Be Issued In Accordance With The Process Set Out Below To Allow New Suppliers To Become Qualified. Existing Qualified Suppliers, Who Have Been Issued A Supply Arrangement, Will Not Be Required To Submit A New Arrangement. The Initial Notice (100024501/a) Was Posted On November 20, 2023 In Order To Begin The Qualification Process For Bidders Who Have Submitted Arrangements For The Initial Notice. This Notice (100024501/b) Will Be Left Continuously Posted On The Government Electronic Tendering Service (gets) To Allow New Suppliers To Become Qualified. Qualified Vendors Will Be Added To The Supply Arrangement, As They Have Been Deemed To Qualify. This Supply Arrangement Will Have A Total Of Four Work Streams, Which Bidders May Indicate Their Interest/capability In: 4.1 Stream One: Furniture Assembly And Moving Services The Sa Holder Must Carry Out Services Including: 1. Removing Assembled Furniture Items Or Disassembled Furniture Item Parts From Packaging And/or Pallets; 2. Assembling Furniture Items According To Manufacturer Instructions And/or Guidelines; 3. Moving Furniture Items By Hand, Or Using Tools, Either Assembled Or In Parts To Designated Areas; 4. Placing Furniture Items According To Provided Floor Plans And Client Authority Directions; 5. Leaving With All Packaging Waste Produced And Disposing Of It In An Ecologically Respectful Manner; 6. Leaving Job Sites In A “clean And Ready To Be Used” State; 7. Prepare A Report Of All Damaged, Broken Or Non-functional Furniture Items. 8. The Sa Holder Must Not Unpackage, Assemble Or Move Items That Were Not Identified In The Work Order, Unless Advised Otherwise By The Project Authority. 9. Where Elevators Are To Be Used For Moving Items Or Equipment, The Elevator Cab Must Be Lined And Properly Protected. 10. Doors And Door Openings Must Be Protected From Potential Damage, When Applicable. When Necessary, The Contractor Must Remove Doors From The Frames And Reinstall Without Damage At The End Of The Services. 4.2 Stream Two: Furniture Dismantling And Packaging Services The Sa Holder Must Carry Out Services Including: 1. Dismantling And Disassembling Furniture Items, Without Damaging Them, According To Manufacturer Instructions And Guidelines; 2. Sort And Place Furniture Items And Parts By Types And Sizes When Dismantling Entire Floor Areas; 3. Supply Crates, Skids, Wrap Shrink, Labels, Etc. For Packaging. 4. Labelling And Packaging And Or Crating Assembled Furniture Items For Transport On Skids For Transport; 5. Labelling And Packaging And Or Crating Furniture Item Parts On Skids For Transport; 6. Transport Furniture Items And Furniture Parts To Storage Areas According To Provided Floor Plans And Client Authority Directions; 7. Leaving With All Excess Packaging Waste Produced And Disposing Of It In An Ecologically Respectful Manner; 8. Leaving Job Site In A Clean State. 9. Prepare A Report Of Any Damaged, Broken Or Non-functional Furniture Items. 10. The Sa Holder Must Not Dismantle, Package, Move Or Store Items That Were Not Identified In The Work Order, Unless Advised Otherwise By The Project Authority. 11. Where Elevators Are To Be Used For Moving Items Or Equipment, The Elevator Cab Must Be Lined And Properly Protected. 12. Doors And Door Openings Must Be Protected From Potential Damage, When Applicable. When Necessary, The Contractor Must Remove Doors From The Frames And Reinstall Without Damage At The End Of The Services. 4.3 Stream Three: Office Equipment Cabling, Connecting, Disconnecting And Installing Services The Sa Holder Must Carry Out Services Including: 1. Preparing Workstations And Removing Cabling For Workstations 1. Pull And Run Existing Power And Data Cables For Connectivity As Needed For Specified Site Work. 2. Cable Management And Coiling To Ceiling As Required At Sites For Specified Work. 3. Disconnect, Wrap And/or Remove Existing Data Cables As Needed For Specified Site Work. 4. Label Cables To Identify Associated Equipment. 2. Unpacking Office Equipment And Removing All Packaging In Preparation For Installation 3. Assembling And Installing Office Equipment On Workstations Including: 1. Monitor Arms; 2. Cable Trays; 3. Work Surface Mounted Power/usb Modules; 4. Mounting And Unmounting Monitors On Monitor Arms; 5. Connecting And Disconnecting Workstation Equipment Including: 1. Laptop Docking Stations To Monitors; 2. Monitors And Laptop Docking Stations To Power Bar; 3. Work Surface Mounted Power Socket And Usb Hub To Power Bar; 4. Power Bars To Panel Or Wall Mounted Power Outlet; 5. When Disconnecting, Removal And Wrapping Or Bundling Of All Cables; 6. When Disconnecting, Identifying All Cables To The Equipment They Were Connected To; 7. Remove, Wrap And Bundle Unused Cables; 8. Power Bars And Power Modules Must Not Be ‘dasiy Chained’ Or Connected To Each Other In Sequence. 6. Organizing Cables And Wiring To Ensure Workstations Have An Adequate Cable Management Setup By: 1. Passing Monitor Cables Trough Monitor Mount Dedicated Wire Channels And Grommet Holes When Possible; 2. Passing Docking Station Cables Either Through Grommet Holes Or Over The Work Surface Edge; 3. Passing Work Surface Power Outlet Cables Either Through Grommet Holes Or Over The Work Surface Edge; 4. Placing Power Bars And All Extra Cable Length In The Cable Tray; Bundling And Securing Them In Place With Cable Managers, Such As Velcro Straps, Or When No Cable Trays Are Provided, Attach All Extra Cable Length With Cable Managers To Work Station And Ensure No Cabling Obstructs Access To Workstation Or Drops Into Leg Space Under Work Station, 1. For Height Adjustable Workstations, Cables Must Have Enough Free Length To Accommodate The Minimum And Maximum Height Adjustments; 7. Testing Basic Functionality Of Office Equipment; 1. Checking And Adjusting Movement Range And Support Capacity Of Monitor Arms; 2. Turning On Monitor Screens To Verify That They Receive Power; 3. Verifying That Power Sockets And Usb Sockets Of Work Surface Mounted Power Outlet Are Receiving And Transmitting Power; 4. Verify That Laptop Docking Station Indicator Light Is On And That Connecting A Device To The Usb-c Dongle Transmits Images To The Screens And Powers The Device; 5. Prepare A Report Of Any Damaged, Broken Or Non-functional Equipment; 6. Leaving Job Sites In Clean State, And In The Case Of Installation, Site Must Be Ready For Use By Client; 7. Leaving With All Excess Packaging Waste Produced And Disposing Of It In An Ecologically Respectful Manner. 8. The Sa Holder Must Not Install, Mount, Connect Or Test Items That Were Not Identified In The Work Order, Unless Advised Otherwise By The Project Authority. 4.4 Stream Four: Repair Services The Sa Holder Must Carry Out Services Including But Not Limited To: 1. Identify Any Required Repairs During Moves And/or Installations A. Assess Associated Costs B. Provide Detailed Report 2. Vendor May Be Provided A List Of Already Identified Repairs A. Vendor To Provide A Detailed Quote 3. Vendor May Be Required To Assess Scope Of Potential Repairs To Furniture Or Office Equipment. A. Repairs Include The Following But Not Limited To Items Listed In Definitions - 3.1 I. Furniture - 3.1.1 Ii. Office Equipment – 3.1.2 B. Vendor To Provide A Report Including A Detailed Quote 4. All Repairs Will Follow All Possible Safety Precautions 5. All Repair Quotes Will Include A Start Date And An Approximate Completion Timeframe A. Should Work Exceed Original Established Parameters, Vendor To Provide Additional Quote Prior To Continuing. 6. Prepare A Report Detailing The Completed Repairs, Including Any Outstanding Work That Couldn’t Be Completed (and Reasons Why). 7. Leaving Job Sites In A “clean And Ready To Be Used” State; 8. Leaving With All Packaging Waste Produced And Disposing Of It In An Ecologically Respectful Manner; This Sa Will Also Be Broken Down Into 25 Zones Across Canada, Which Vendors Will Be Asked To Indicate Which Zones That They Are Capable/willing To Offer Services In: Zone # Zone Name 1 Upper Bc 2 Central Bc 3 Lower Bc 4 Upper Ab 5 Lower Ab 6 Upper Sk 7 Lower Sk 8 Upper Mb 9 West Mb 10 East Mb 11 West On 12 Upper On 13 East On 14 Central On 15 Lower On 16 Greater Quebec 17 Montreal 18 Quebec City 19 New Brunswick 20 Nova Scotia 21 P.e.i 22 Labrador 23 Island Of Newfoundland 24 Yukon 25 Nwt

Details: Description Invitation To Bid For 25ka0060 Construction Of Archives Building Of Deo (bukidnon 1st Deo),malaybalay City, Bukidnon Malaybalay City, Bukidnon 1. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City, Through The Gaa 2025 Intends To Apply The Sum Of Php 24,500,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ka0060 Construction Of Archives Building Of Deo (bukidnon 1st Deo),malaybalay City, Bukidnon Malaybalay City, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening 2. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Contract Id : 25ka0060 Contract Name : Construction Of Archives Building Of Deo (bukidnon 1st Deo),malaybalay City, Bukidnon Contract Location : Malaybalay City, Bukidnon Scope Of Work : Construction Of Multi-purpose Building: A.) Structure Excavation Of Footing, Tie Beam And Wall Footing; B.) Fabrication And Installation Of Formworks And False Works; C.) Laying Of Embankment (from Excavation) And Gravel Fill; D.) Construction Of Reinforced Concrete Structures Such As Footing, Wall Footing, Beams, Columns, Lintel Beams And Slab On Grade; E.) Chb Laying And Plastering For Perimeter Walls And Partition Walls; F.) Installation Of Metal Structures (trusses, Purlins, Fascia Frame) With Metal Structure Accessories Such As Turnbuckle, Cross Bracing, Steel Plates With Bolts And Sag Rods; G.) Installation Of Rib Type Roofing, Long Span, Above 0.427mm With Flashings; H.) Installation Of Ceiling Works (fiber Cement On Metal Frame); I.) Painting Works Masonry, Woods And All Steel Surfaces; J.) Fabrication And Installation Of Doors With Transom, And Aluminum Windows, And Stainless Steel Railings; K.) Supply Installation Of Finishing Hardware Such As 4”x4” Heavy Duty Hinges, Lever Type Door Knob, Aluminum Stair Nosing (2” F-type), Stainless Steel Grab Bar; 0.30mx0.30mx200mm Tactile Blocks; 2.95m X 25cm X 8mm Wpc Fluted Panels And Office Furniture’s (gang Chair - 4 Seater: Arm And Leg Frames (w233.68 X D63.5 X H81.28cm), Fully Laminated Office Desk (w1400xd68 Xh750mm) With Lockable Center Drawer And 3-drawer Cabinets (right Hand Side) And Drawer-swing Cabinet Pedestal (left Hand Side), Fully Laminated Executive Table (l1600 X W1400 X H750mm) With Lockable Center Drawer And 3-drawer Cabinets (right Hand Side) And Drawer-swing Cabinet Pedestal (left Hand Side), Pvc Mesh Chair (w58xd58xl96cm) With Tilt Mechanism And Arm Rest, Executive Office Chair (w65xd51x119-129cm) Adjustable Seat Height & Swivel 360 Degrees Butterfly Mechanism With Tilt & Lock Function, Pu Padded With Foam + Headrest + 3d Armrest W/ Soft Pu Arm Pad, Dining Set (156cmx78cmx74cm) / Chair (57cm X 45.5cm X 88.5cm), Fully Laminated Office Table (h50xw55xl45cm) With 2- Drawer Cabinet (left Or Right Hand Side), Monoblock Armchair (l44 X W53 X H84cm)); L.) Fabrication And Installation Of Cabinetry; M.) Laying Of Floor And Wall Finishes (glazed And Unglazed Tile); N.) Laying Of Pipes For Waste And Sewer Line; O.) Laying Of Pipes And Fittings For Waterline System; P.) Supply And Installation Of Plumbing Fixtures; Q.) Electrical Works; R.) Mechanical Works: Installation Of Oscillating Ceiling Fan, Exhaust Fan (ceiling Cassette), Air-conditioning (split Type), Fire Extinguisher (4.54kg, Abc With Bracket), And Fire Alarm System; S.) Supply And Installation Of Solar Panels; T.) Application Of Soil Poisoning Chemical Prior To Concrete Pouring Of Slab-on Grade, Tie Beam, Wall Footing, Footing And Building Perimeter After Building Is Complete. Complete As Per Approved Pow, Plans, And Specifications. Approved Budget For The Contract (abc) : Php 24,500,000.00 Source Of Fund : Gaa 2025 Contract Duration : 195 C.d. Bid Documents Fee In Php : Php 25, 000.00 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D For Small B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City And Inspect The Bidding Documents At Capitol Compound, Malaybalay City During Weekdays From 8:00 Am – 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 05, 2024, From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 25,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Will Hold A Pre-bid Conference On December 13, 2024, 10:00 Am Via Zoom With Meeting Id: 923 1132 1070 And Passcode: Dpwh2024 And The Bidder May View Through Live Streaming (youtube Channel) Dpwh Bukidnon 1st Deo Procurement Ls, Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_bukidnon1@dpwh.gov.ph For Electronic Submission On Or Before December 26, 2024 Until 10:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 26, 2024, 10:00 Am At Conference Room, Dpwh-bukidnon 1st Deo. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Rosmendo C. Bongocan, Jr. Engineer Iii Head, Procurement Unit Telefax No. (088) 813-2087 Cellphone No.09178765473 Bongocan.rosmendo_jr@dpwh.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph And Philgeps Website For Online Bid Submission: Electronicbids_bukidnon1@dpwh.gov.ph Approved By: Sarah Jane B. Lagrama Bac Chairperson Date Of Publication: December 04, 2024

Details: U.s. Government general Services Administration (gsa) Seeks To Lease The Following Space: state: Massachusetts city: Hanover delineated Area: Entire Town Limits Of The Town Of Hanover, Ma. minimum Sq. Ft. (aboa): 6,485 maximum Sq. Ft. (aboa): 6,615 space Type: Office parking Spaces (total): 0 parking Spaces (surface): 0 parking Spaces (structured): 0 parking Spaces (reserved): 0 full Term: 15 Years - 180 Months firm Term: 10 Years – 120 Months option Term: N/a agency Unique Requirements agency Tenant Improvement Allowance: $64.26 Per Aboa Sf building Specific Amortized Capital (bsac): $12.00 Per Aboa Sf additional Requirements: site Access Shall Be Via A Direct Route From A Primary Or Secondary Street. traffic Control Devices And Pedestrian Crosswalks Are Required Within Two Blocks. sidewalks And Pedestrian Walkways Shall Be Present Along Roadways And Access Roads. public Transportation Route Stops Shall Be Located Within .25 Mi Of The Offered Location. The Public Transportation Must Service This Location On An Hourly Basis (minimum) From 8:00 A.m. To 3:00 P.m., Except Saturdays, Sundays, And Federal Holidays. public Parking Shall Be Available On Site Or Within .25 Miles Of The Offered Space. Restricted Or Metered Parking Of One Hour Or Less Within .25 Miles Of The Space Does Not Meet Parking Requirements. there Shall Be No History Of Prior Heavy Industrial Use, Such As Dry Cleaning Operations, Gas Stations, Rail Yards, Or Machinery Maintenance Yards. the Site Shall Not Be Located Within .25 Mi Of Active Railroad Tracks, Airports Or Heavily Congested Highways. there Shall Be Adequate Eating Facilities Located Within .5 Miles. Other Employee Services, Such As retail Shops, Cleaners, Banks, Etc., Shall Be Located Within 2 Miles. mixed Use Sites With Residential Or Living Quarters Located Within The Building Are Not Acceptable. sites Located Immediately Adjacent To Establishments Whose Primary Operation Is The Sale Of Alcoholic Beverages, Marijuana Dispensaries, Firearms Sold/discharged, Drug Treatment, Or Detention Facilities Are Not Acceptable. the Site Shall Be Class A Standard Commercial Or Office Space Consistent With The Local Market. the Site Shall Not Be Located Below Grade. sites Located Above Street Level Are Required To Have A Minimum Of Two Accessible Elevators. One Of The Accessible Elevators May Be A Freight Elevator. Elevators Shall Not Discharge Directly Into Ssa Space. the Space Is Required To Be Contiguous. the Space Is Required To Be Level And Shall Not Utilize Interior Ramps To Resolve Changes In Grade. the Space May Not Be More Than Twice As Long As It Is Wide. the Space Must Be Conducive To Ssa’s Business Operation Design. Space Elements Such As Quantity And Size Of Columns, Load Bearing Walls, Irregular Shape, Etc., May Not Impede An Efficient Space Layout, The Use Of Modular Furniture, Or Office Work Flows. Ssa Shall Prepare A Test Fit To Confirm The Acceptability Of The Space. ceilings Shall Be 9’ To 12’ As Measured From Floor To The Lowest Obstruction. sufficient Space Shall Exist Between The Drop Ceiling And The Deck Of The Floor Above To Allow For Lighting, Hvac Equipment, Fire Suppression Piping, Etc. the Site Shall Have Two Lines Of Windows For Natural Lighting. interested Parties Must Provide The Name Of The Building, Address, Location Of Available Space, Rentable Square Feet Offered, And Contact Information Of Authorized Representative. all Interested Parties Must Either Submit Evidence Of Ownership Or Written Authorization To Represent The Owner(s). Any Submissions Received Without Documentation Of Ownership And/or Written Authorization To Represent The Owner(s) Will Not Be Considered Until Such Time The Documentation Has Been Received, Which Must Also Be Submitted Prior To The Expression Of Interests Due Date in Cases Where An Agent Is Representing Multiple Ownership Entities, Broker Must Provide Written Acknowledgement/permission To Represent Multiple Interested Parties For The Same Submission. reference Project Number: 2ma0212 please Submit Your Offer No Later Than 5:00 P.m. Eastern Time On May 17, 2024 Using The Lease Offer Platform/requirement Specific Acquisition Platform (lop/rsap) Located Athttps://lop.gsa.gov/rsap. offered Space Must Meet Government Requirements For Fire Safety, Accessibility, Seismic, And Sustainability Standards Per The Terms Of The Lease. A Fully Serviced Lease Is Required. Offered Space Shall Not Be In The 100-year Floodplain. entities Are Advised To Familiarize Themselves With The Telecommunications Prohibitions Outlined Under Section 889 Of The Fy19 National Defense Authorization Act (ndaa), As Implemented By The Federal Acquisition Regulation (far). ). For More Information, Visit: Https://acquisition.gov/far-case-2019-009/889_part_b. expressions Of Interest Due: May 17, 2024 market Survey (estimated): Tbd occupancy (estimated): Tbd send Expressions Of Interest To: name/title: Clare Nawrocki address: 10 Causeway Street, 11th Fl., Boston, Ma 02222 phone: 617-513-1831 email Address: Clare.nawrocki@gsa.gov government Contact Information lease Contracting Officer: Danielle Piantedosi leasing Specialist: Clare Nawrocki