Tenders of Nhpc Limited

CATEGORY: Purchase of BDV (Breakdown Voltage) testing kit for testing of insulating oil at Switchyard Complex

CATEGORY: CONTROL TRANSFORMER 1KVA , MOTOR PROTECTION CUIRCUIT BREAKER, RANGE- 51 -70A , BREAKER HANDLE WITH KNOB, SIEMENS 3VT SERIES , PANEL DOOR LOCK FOR POWER PACK , ETHRNET SWITCH 5-PORT UNMANAGED, PORTS- 5 UNMANGED TYPE AUX. SUPPLY- 24VDC , SMPS DIN RAIL MOUNTED 24V DC 10A, OUTPUT- 24V DC, 10A DIN RAIL MOUNTED TYPE , STAR DELTA TIMER, 0 -60 SEC , PANEL FAN, 220V AC, SIZE 6 Inch , MCB 2.0 AMP. SINGLE POLE , MCB 4 A SINGLE POLE , SINGLE POLE MCB 6 AMP , MCB 4 A DOUBLE POLE , DC MCB DOUBLE POLE 220 V DC 06 AMP , TRIPPLE POLE MCB 4A, C04 , MCB TRIPPLE POLE, C CURVE, 6AMP , RELAY 8-PIN WITH BASE, 8-PIN 24V DC WITH BASE , SPACE HEATER, RATING-500W 230V AC , PRESSURE GAUGE, ANALOG TYPE, RANGE- 0-500KGF per SQ. CM , TANK OIL GAUGE, TANK MOUNTED DIRECT MEASURING , DIRECTIONAL SOLENOID VALVE, OPERATING PRESSURE- 315 KGF per SQ. CM COIL VOLTAGE-24V DC , GATE POSITION SENSOR FOR RADIAL GATE, E1-TYPE RANGE 0- 360 Degree, ANALOG OUTPUT 4 - 20 MA , INDICATION LIGHT - BLUE, INDICATION LAMP 22.5 MM 220V AC BLUE , DIFFERENTIAL PRESSURE TRANSMITTER, TWO WIRE 4 -20 MA DC OUTPUT WITH HART , LEVEL TRANSMITTER ACCURACY 5-10 MM , GATE POSITION INDICATOR 5 DIGIT 0.56 Inch DISPLAY 21 , VOLTMETER 0- 500V - ANALOG , PUSH BUTTON RED WITH NC ADD ON , AMMETER, 0 -250A ANALOG , INDICATION LIGHT - RED, INDICATION LAMP 22.5MM 220VAC RED , INDICATION LIGHT - YELLOW, INDICATION LAMP 22.5MM 220V AC YELLOW , INDICATION LIGHT - GREEN, INDICATION LAMP 22.5MM 220V AC GREEN , JUMBO DISPLAY SIZE 6.5 Inch USB PORTS 2.0 X 1, 3.0 X 1 , PUSH BUTTON YELLOW WITH NO ADD ON, SIZE 22.5 MM , PUSH BUTTON BLUE WITH NO ADD ON, SIZE 22.5 MM , PUSH BUTTON GREEN WITH NO ADD ON, SIZE 22.5 MM , PUSH BUTTON BLACK WITH NO ADD ON, SIZE 22.5 MM , EMERGENCY PUSH BUTTON, SIZE 22.5 MM , PHASE PREVENTER RELAY SYSTEM AC MODE AUTO , UTP CABLE CAT-5e , CABLE 1.5 SQMM 4C FLEXIBLE 100M BUNDLE , 1024 TAGS and DDLS OF SCADA SYSTEM , CONTROL TERMINAL BLOCK, 2.5SQ.MM , Service Engineer charges , Traveling Charges , Freight Charges

Strengthening Of Dumping Site Number Ds-7 Near Adit-iv Of Parbati-h.e. Project (stage-ii), (package No-c-786)

Repair Re-insulation Of Overhang Portion Of 40 Nos. Stator Bars And 13 Nos. Jumpers Of 110mw Hydro Generator Installed At Kishanganga Power Station, Bandipora, J And K (pkg-510).

CATEGORY: Numerical Distance Protection Relays for installation of 400 KV Transmission Lines in Switchyard.

CATEGORY: SITC of Cooling water system of 700TR with supply of mandatory spares for Chiller Plant 600TR , Installation, Testing and commissioning of Cooling tower system of 700TR for Chiller Plant 600TR , Mandatory spares For Cooling System

Inverter

Construction Of Fire Fighting Tank In Switch Yard Of Power House At Tldp-iii

CATEGORY: HEX HEAD BOLT M8X1.25X25MM , HEX HEAD BOLT M10X1.5X25MM , HEX HEAD BOLT CLASS 8.8 , BOLT WITH NUT 12X50 , HEXAGON HEAD BOLTS M12X1.75X25 LENGTH , HEX HEAD BOLT WITH NUT M12X80 MM , HEX HEAD BOLT M12X1.75X75MM CLASS 8.8 , HEX HEAD BOLT M16X2X50MM , BOLT WITH NUT AND WASHER THREAD END LENGTH 40MM , HEX HEAD BOLT M20X2.5X50MM , HIGH TENSILE HEX HEAD BOLT WITH NUT M16X55MM , HT HEX NUT BOLT M10X50 MM , HT HEX NUT BOLT M12X50 MM , HT HEX NUT BOLT M12X75 MM , HEX BOLT WITH NUT SIZE M18X170MM IS 1363 CLASS 8.8 , HT HEX NUT BOLT M20X100 MM , MS NUT AND BOLT WITH WASHER M16X100 , MS NUT AND BOLT WITH WASHER M16X150 , HEX HEAD BOLT M8X1.25X50MM , HEX HEAD BOLT M10X1.5X50MM , HEX HEAD BOLT M18X2.5X75MM , HEX HEAD BOLT M12X1.75X50MM , HEX HEAD BOLT M16X2X75MM , HEX HEAD BOLT M20X2.5X75MM , HEX HEAD BOLT M24X3X100MM , MS BOLT SIZE M 16X40 MM , MS STUD BOLT M 24X110 , SINGLE COIL SPRING WASHER FOR M16 BOLT , SINGLE COIL SPRING WASHER FOR M24 BOLT , SS STUD 17MM , M16X2X150MM SS STUD , M20X2.5X95MM LENGTH STUD WITH NUT AND WASHER , M12X1.75X70MM LENGTH STUD WITH NUT AND WASHER , STUD WITH NUT AND WASHER , M14X2X70MM LENGTH SS STUD WITH NUT AND WASHER , M16X2X70MM LENGTH SS STUD CLASS 8.8 WITH NUT AND WASHER , SS STUD 38MM , STUD WITH NUT AND WASHER 16MMX130 MM , HEX HEAD BOLT FULL THREAD M10 X 75 , CSK FLAT HEAD SOCKET BOLT M10X25 , CAP SCREW M16 X 40HEX SOCKET , STUD M24X125 WITH NUT AND WASHER , BLACK HEX HT BOLT AND NUT M 16X50 , HEXAGONAL SOCKET CAP BOLT M10X25 , HEX BOLT WITH NUT AND WASHERS M12X30 , STUD M16X60 WITH NUT AND WASHER , STUD M24X90 WITH NUT AND WASHER , S S 304 HEX SOCKET COUNTER SHUNK HEAD BOLT WITH NUT M16X2X85MM THREADED LENGTH 40MM , S S 304 HEX SOCKET COUNTER SHUNK HEAD BOLT M16X2X120 THREADED LENGTH 50MM , SS HEX HEAD BOLT M 24X3X60 MM , HSS BOLT WITH NUT And WASHER M16X80 , S S STUD M 12 X 120MM , SS HEX HEAD BOLT M16X2X42MM WITH NUT , SS HEX HEAD COLLAR BOLT M 20X2.5X33 MM , ALLEN KEY HEAD BOLT WITH NUT OF SS M16X85 , SS HEXAGONAL BOLT M24X80 WITH NUT AND WASHER , STAINLESS STEEL THREAD INSERT FOR M24X60 SS BOLT , EYE BOLT M10 , EYE BOLT 12MM , EYE BOLT 16MM , EYE BOLT M20 , EYE BOLT M24

Construction Of Two Morchas For Cisf Near Power House, Cps-1 Khairi