Tenders of Ihp Gmbh Leibniz Institut F R Innovative Mikroelektronik

E-beam Lithografietool

Germany – Laboratory, Optical And Precision Equipments (excl. Glasses) – E-beam Lithografietool

Structural and energetic renovation of additional building_lot 05. Painting, wallpapering and parquet laying work

Support For Verification Rule Decks For Ihp Pdks

Category Specifications General Requirements - Full Ce Conformity Must Be Declared - The Offer Must Be Accompanied By A Description Of The Machine With The Principle Of Operation. Preferably A Corresponding Presentation. - Electrical Connections Requirements: 230/400vac 50hz Tn-s Net (separated N/pe) - No Refurbished System (measuring Unit, Parts) - All Manuals As Hard Copies On Paper And On Cd - User Interface Labels In English And German Languages - Safety And Operation Manuals Must Be In English And German Hardware - 1 Tesla Permanent Magnet - Must Accommodate Samples Up To 15 Mm X 15 Mm And Up To 2 Mm Thick - 8 Measurement Ports (needles) - Light Intensity Dependent Measurement Module (uv, Red, Green And Blue Leds) Dimensions/weight - Must Not Exceed 30 Cm X 50 Cm X 20cm (wxlxh) For Measurement/magnet Unit - Max 35 Kg - Must Not Exceed 40 Cm X 50 Cm X 20cm (wxlxh) For Controller Unit - Max 10kg Measurements Ranges - Temperature Range: 80 -300 K - Mobility Range: 1-107 Cm2/v·s - Carried Concentration Density: 107-1021 Cm-3 - Current: 2na To ±20ma - Voltage: ± 12v - Resistivity: 10-4-109 ?cm Vacuum System - Dry, Oil-free Vacuum Pump - Pressure Controller With Throttle Valve - Soft Pump Angle Valve To Prevent Small Samples From Moving At Pump Down - All Necessary Adaptors, Connections, O- Rings, Flanges, Clamps Etc. Control System - Pc/laptop With All Needed Software Installed - Must Be Up To Date Operating System And It-hardware (microsoft Windows Or Comparable Operating System) - Real-time Control Of Hardware And Parameters - Complete Process Control And Data Logging Through Unified Software Package - Manual Control For Testing And Maintenance Software - Real-time Display Of Parameter Values - I-v, Hall Bar 6, Van Der Pauw, R-t Measurements. - Ability To Apply Bias To Back/top Gate In Gated Hallbar6 Devices. - Software Calculates Resistivity, Hall Coefficient, And Carrier Concentration, Type And Mobility. Safety Features - Interlocks Against Overheating, Component Failures Etc. Spare Parts - Double Set Of Frequently Needed Spare Parts (sample Holder, Needle, O-rings, Etc.) As Separate Option User Kit - Tweezers, Silver Paint, Standard Samples (hall Sensor, Ito, P-ge), Factory Test Report, Stage, And Cover Service/warranty - 12 Months Limited Manufacturer's Warranty - 2 Days Of Installation/training By Manufacturer At Ihp Site Delivery - Tool Delivery By The Supplier To A Defined Place Inside Ihp - If Delivery Is From Outside Eu, The Supplier Is The Importer - System Startup By Manufacturer At Ihp Site