Housekeeping Tenders

Details: Description Republic Of The Philippines Department Of Environment And Natural Resources Office Of The Penro City Of Ilagan, Isabela Telefax No.: (078) 325-5701 Procurement Of One (1)-year Janitorial Services For The Department Of Environment And Natural Resources-isabela (denr-isabela) Provincial And Community Field Offices For Fy 2025 Bids And Awards Committe November 2024 Preface These Philippine Bidding Documents (pbds) For The Procurement Of Goods Through Competitive Bidding Have Been Prepared By The Government Of The Philippines For Use By Any Branch, Constitutional Commission Or Office, Agency, Department, Bureau, Office, Or Instrumentality Of The Government Of The Philippines, National Government Agencies, Including Government-owned And/or Controlled Corporations, Government Financing Institutions, State Universities And Colleges, And Local Government Unit. The Procedures And Practices Presented In This Document Have Been Developed Through Broad Experience, And Are For Mandatory Use In Projects That Are Financed In Whole Or In Part By The Government Of The Philippines Or Any Foreign Government/foreign Or International Financing Institution In Accordance With The Provisions Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. The Bidding Documents Shall Clearly And Adequately Define, Among Others: (i) The Objectives, Scope, And Expected Outputs And/or Results Of The Proposed Contract Or Framework Agreement, As The Case May Be; (ii) The Eligibility Requirements Of Bidders; (iii) The Expected Contract Or Framework Agreement Duration, The Estimated Quantity In The Case Of Procurement Of Goods, Delivery Schedule And/or Time Frame; And (iv) The Obligations, Duties, And/or Functions Of The Winning Bidder. Care Should Be Taken To Check The Relevance Of The Provisions Of The Pbds Against The Requirements Of The Specific Goods To Be Procured. If Duplication Of A Subject Is Inevitable In Other Sections Of The Document Prepared By The Procuring Entity, Care Must Be Exercised To Avoid Contradictions Between Clauses Dealing With The Same Matter. Moreover, Each Section Is Prepared With Notes Intended Only As Information For The Procuring Entity Or The Person Drafting The Bidding Documents. They Shall Not Be Included In The Final Documents. The Following General Directions Should Be Observed When Using The Documents: A.all The Documents Listed In The Table Of Contents Are Normally Required For The Procurement Of Goods. However, They Should Be Adapted As Necessary To The Circumstances Of The Particular Procurement Project. B.specific Details, Such As The “name Of The Procuring Entity” And “address For Bid Submission,” Should Be Furnished In The Instructions To Bidders, Bid Data Sheet, And Special Conditions Of Contract. The Final Documents Should Contain Neither Blank Spaces Nor Options. C.this Preface And The Footnotes Or Notes In Italics Included In The Invitation To Bid, Bid Data Sheet, General Conditions Of Contract, Special Conditions Of Contract, Schedule Of Requirements, And Specifications Are Not Part Of The Text Of The Final Document, Although They Contain Instructions That The Procuring Entity Should Strictly Follow. D.the Cover Should Be Modified As Required To Identify The Bidding Documents As To The Procurement Project, Project Identification Number, And Procuring Entity, In Addition To The Date Of Issue. E.modifications For Specific Procurement Project Details Should Be Provided In The Special Conditions Of Contract As Amendments To The Conditions Of Contract. For Easy Completion, Whenever Reference Has To Be Made To Specific Clauses In The Bid Data Sheet Or Special Conditions Of Contract, These Terms Shall Be Printed In Bold Typeface On Sections I (instructions To Bidders) And Iii (general Conditions Of Contract), Respectively. F.for Guidelines On The Use Of Bidding Forms And The Procurement Of Foreign-assisted Projects, These Will Be Covered By A Separate Issuance Of The Government Procurement Policy Board. Table Of Contents Glossary Of Acronyms, Terms, And Abbreviations ………………………….4 Section I. Invitation To Bid……………………………………………………..6 Section Ii. Instructions To Bidders…………………………………………...9 1. Scope Of Bid ………………………………………………………………………. 9 2. Funding Information………………………………………………………………. 9 3. Bidding Requirements ……………………………………………………………. 9 4. Corrupt, Fraudulent, Collusive, And Coercive Practices………………………….. 9 5. Eligible Bidders…………………………………………………………………… 9 6. Origin Of Goods ………………………………………………………………….. 10 7. Subcontracts ……………………………………………………………………… 10 8. Pre-bid Conference ………………………………………………………………. 11 9. Clarification And Amendment Of Bidding Documents …………………………… 11 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 11 11. Documents Comprising The Bid: Financial Component …………………………... 11 12. Bid Prices …………………………………………………………………………. 12 13. Bid And Payment Currencies ……………………………………………………… 12 14. Bid Security ………………………………………………………………………. 12 15. Sealing And Marking Of Bids ……………………………………………………… 13 16. Deadline For Submission Of Bids …………………………………………………. 13 17. Opening And Preliminary Examination Of Bids ………………………………….. 13 18. Domestic Preference ……………………………………………………………… 14 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 14 20. Post-qualification ………………………………………………………………… 14 21. Signing Of The Contract …………………………………………………………… 14 Section Iii. Bid Data Sheet …………………………………………………..15 Section Iv. General Conditions Of Contract ……………………...………..17 1. Scope Of Contract ………………………………………………………………… 17 2. Advance Payment And Terms Of Payment ……………………………………….. 17 3. Performance Security ……………………………………………………………. 17 4. Inspection And Tests ……………………………………………………………… 17 5. Warranty …………………………………………………………………………. 18 6. Liability Of The Supplier ………………………………………………………….. 18 Section V. Special Conditions Of Contract ………………………………….19 Section Vi. Schedule Of Requirements ……………………………………....23 Section Vii. Technical Specifications …………………………………………31 Section Viii. Checklist Of Technical And Financial Documents …………..33 Section Ix. Detailed Financial Breakdown…………………………………35 Glossary Of Acronyms, Terms, And Abbreviations Abc – Approved Budget For The Contract. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Cda - Cooperative Development Authority. Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Cif – Cost Insurance And Freight. Cip – Carriage And Insurance Paid. Cpi – Consumer Price Index. Ddp – Refers To The Quoted Price Of The Goods, Which Means “delivered Duty Paid.” Dti – Department Of Trade And Industry. Exw – Ex Works. Fca – “free Carrier” Shipping Point. Fob – “free On Board” Shipping Point. Foreign-funded Procurement Or Foreign-assisted Project– Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Framework Agreement – Refers To A Written Agreement Between A Procuring Entity And A Supplier Or Service Provider That Identifies The Terms And Conditions, Under Which Specific Purchases, Otherwise Known As “call-offs,” Are Made For The Duration Of The Agreement. It Is In The Nature Of An Option Contract Between The Procuring Entity And The Bidder(s) Granting The Procuring Entity The Option To Either Place An Order For Any Of The Goods Or Services Identified In The Framework Agreement List Or Not Buy At All, Within A Minimum Period Of One (1) Year To A Maximum Period Of Three (3) Years. (gppb Resolution No. 27-2019) Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Gppb – Government Procurement Policy Board. Incoterms – International Commercial Terms. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Supplier – Refers To A Citizen, Or Any Corporate Body Or Commercial Company Duly Organized And Registered Under The Laws Where It Is Established, Habitually Established In Business And Engaged In The Manufacture Or Sale Of The Merchandise Or Performance Of The General Services Covered By His Bid. (item 3.8 Of Gppb Resolution No. 13-2019, Dated 23 May 2019). Supplier As Used In These Bidding Documents May Likewise Refer To A Distributor, Manufacturer, Contractor, Or Consultant. Un – United Nations. Section I. Invitation To Bid Invitation To Bid Procurement Of One (1)-year Janitorial Services For The Department Of Environment And Natural Resources (denr-isabela) Provincial And Community Field Offices For Fy 2025 1.the Denr-penro Isabela, Of The National Expenditure Program (nep) For Fy 2025 Intends To Apply The Sum Of Two Million Ninety Thousand Nine Hundred Forty-nine Pesos & 34/100 (₽2,090,949.34) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Procurement Of One (1)-year Janitorial Services For The Department Of Environment And Natural Resources (denr-isabela) Provincial And Community Field Offices For Fy 2025. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Total Manpower Is Broken Down As Follows: Office Position Quantity Penr Office, City Of Ilagan, Isabela Janitor/janitress 4 Cenro Cabagan Janitor/janitress 1 Cenro Cauayan Janitor/janitress 1 Cenro Naguilian Janitor/janitress 1 Cenro San Isidro Janitor/janitress 1 Penr Sub-office (roxas, Isabela) Janitor/janitress 1 Total 9 2.the Denr Now Invites Bids For The Above Procurement Project. The Janitorial Services Shall Commence Upon Receipt Of The Notice To Proceed (ntp) Until 31 December 2025. Bidders Should Have Completed, Within The Last Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Similar Project Shall Mean “procurement Of Janitorial Services”. 3.bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4.prospective Bidders May Obtain Further Information From Denr Penro Isabela And Inspect The Bidding Documents At The Address Given Below During 9:00 Am To 4:00 Pm Only (mondays To Fridays). 5.a Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting November 8, 2024 Until The Submission Of Bids From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6.the Denr-penro Ilagan, Isabela Will Hold A Pre-bid Conference On November 18, 2024, 1:30 Pm At The Pinaroc Hall, Penr Office, Osmeña, City Of Ilagan, Isabela Which Shall Be Open To Prospective Bidders. Authorized Representatives Of Bidders Shall Join The Meeting Via Virtual Platform. 7.bids Must Be Duly Received By The Bac Secretariat Or The Penro-isabela Records Section Through Manual Submission At The Office Address Indicated Below On Or Before November 28, 2024, 1:00 P.m. Late Bids Shall Not Be Accepted. 8.all Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9.bid Opening Shall Be On November 28, 2024, 1:30 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Authorized Bidders’ Representatives Who Choose To Attend The Activity. 10.the Penro-isabela Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Preciosa G. Oñate Head, Bac Secretariat Denr-penr Office Osmeña, City Of Ilagan, Isabela Penroisabela@denr.gov.ph C.p. No.: 0917-628-3429 You May Download The Bidding Documents At Philgeps Website. November 5, 2024 Luz S. Soriano Chief, Administrative Officer Chairperson, Bids And Awards Committee Section Ii. Instructions To Bidders 1.scope Of Bid The Procuring Entity, Denr Penro Isabela Wishes To Receive Bids For The Procurement Of One (1)-year Janitorial Services For The Department Of Environment And Natural Resources (denr-isabela) Provincial And Community Field Offices For Fy 2025. The Procurement Project (referred To Herein As “project”) Is Composed Of One (1) Lot, The Details Of Which Are Described In Section Vii (technical Specifications). 2.funding Information 2.1.the Gop Through The Source Of Funding As Indicated Below For Fy 2025 In The Amount Of Two Million Ninety Thousand Nine Hundred Forty-nine Pesos & 34/100 (₽2,090,949.34). A.the Source Of Funding Is: Nep, National Expenditure Program. 3.bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4.corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5.eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I.when A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii.citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii.when The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv.when There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A.for The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6.origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7.subcontracts 7.1.the Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That Subcontracting Is Not Allowed. 7.2.subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Supplier’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8.pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address And/or Through Videoconferencing As Indicated In The Ib. 9.clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10.documents Comprising The Bid: Eligibility And Technical Components 10.1.the First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2.the Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within The Last Five (5) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3.if The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11.documents Comprising The Bid: Financial Component 11.1.the Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2.if The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3.any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4.for Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12.bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A.for Goods Offered From Within The Procuring Entity’s Country: I.the Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii.the Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii.the Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv.the Price Of Other (incidental) Services, If Any, Listed In The Bds. B.for Goods Offered From Abroad: I.unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii.the Price Of Other (incidental) Services, If Any, As Listed In The Bds. 13.bid And Payment Currencies 13.1.for Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2.payment Of The Contract Price Shall Be Made In Philippine Pesos. 14.bid Security 14.1.the Bidder Shall Submit A Bid Securing Declaration[ In The Case Of Framework Agreement, The Undertaking Shall Refer To Entering Into Contract With The Procuring Entity And Furnishing Of The Performance Security Or The Performance Securing Declaration Within Ten (10) Calendar Days From Receipt Of Notice To Execute Framework Agreement.] Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2.the Bid And Bid Security Shall Be Valid One Hundred Twenty Calendar Days From The Date Of Opening Of Bids. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15.sealing And Marking Of Bids Each Bidder Shall Submit One (1) Originally Signed Certified True Copy Of The Original Document And Two (2) Duplicate Copies Of The First And Second Components Of Its Bid. Bidder Must Arrange Each Bid Documents Into Sections With Tabs Properly Labeled Separating Each Document According To The Provided Checklist. All Envelopes Shall: (a)contain The Name Of The Contract To Be Bid In Capital Letters; (b)bear The Name And Address Of The Bidder In Capital Letters; (c)be Addressed To The Procuring Entity’s Pbac; (d)bear The Specific Identification Of This Bidding Process Indicated In The 1.0; And (e)bear A Warning “do Not Open Before…” The Date And Time For The Opening Of Bids, As Specified In The Ib. To : The Provincial Bids And Awards Committee Provincial Environment And Natural Resources Office From : __________________________________________ (name Of Bidder In Capital Letters) Address : ________________________________________ (address Of Bidder In Capital Letters) Project : _____________________________________________ (in Capital Letters, Indicate The Phrase): “do Not Open Before: _____________________________________ 16.deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In The Ib. 17.opening And Preliminary Examination Of Bids 17.1.the Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2.the Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18.domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.detailed Evaluation And Comparison Of Bids 19.1.the Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2.if The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3.the Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4.the Project Shall Be Awarded As Follows: One Project Having Several Items That Shall Be Awarded As One Contract. 19.5.except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20.post-qualification 20.2. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21.signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A.procurement Of Janitorial Services; And B.completed Within The Last Five (5) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Sub-contracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp Philippines Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or The Amount Of Not Less Than Five Percent (5%) Of Abc If Bid Security Is In Surety Bond. 15 Each Bidder Shall Submit One (1) Originally Signed Certified True Copy Of The Original Document And Two (2) Duplicate Copies Of The First And Second Components Of Its Bid. Bidder Must Arrange Each Bid Documents Into Sections With Tabs Properly Labeled Separating Each Document According To The Provided Checklist. 19.3 The Project Will Be Awarded As One (1) Lot. 20.2 No Further Instructions. 21.2 Within Ten (10) Calendar Days From Receipt Of Notice Of Award, Successful Bidder Shall Post The Required Performance Security, Sign And Date The Contract And Return It To Denr. Section Iv. General Conditions Of Contract 1.scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2.advance Payment And Terms Of Payment 2.1.advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2.the Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3.performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4.inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Vii (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5.warranty 5.1in Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 5.2the Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6.liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: “the Delivery Terms Applicable To This Contract Are Delivered In Penr Office, Sub-office And Cenr Offices. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is: Miguel L. Vasquez Supply Officer I Chief, General Services Unit Denr Penro Isabela Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A.performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B.furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C.furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D.performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Payment Shall Be Made Upon Submission Of Complete Documentary Requirements In Accordance With Prevailing Accounting And Auditing Rules And Regulations. 4 Applicable Inspection And Testing Shall Be Conducted By The Inspection And Pre-acceptance Committee Of The Office. Section Vi. Schedule Of Requirements Terms Of Reference Procurement Of Janitorial Services Covering The Period Of January 1, 2025 To December 31, 2025 1.0 Provision Of Janitorial Personnel, Including Submission Of Housekeeping Plan A.the Contractor Shall Provide Nine (9) Janitorial Personnel Who: 1.1are Of Good Moral Character And Without Criminal Or Police Records; 1.2are Fit To Work, As Evidenced By A Medical Certificate Issued Within The Last Two (2) Months (specify That The Janitorial Personnel Are Fit To Work); And 1.3underwent Basic Housekeeping Training. B.the Contractor Shall Submit Within Three (3) Calendar Days From Receipt Of Notice To Proceed The Employee File Of Each Janitorial Personnel With Complete Attachments, Such As But Not Limited To, Resume, Training Certificate/s, Government Mandated Clearances, And Medical Certificate. C.the Contractor Shall Assign A Supervisor Or Authorized Representative From Its Own Account, Separate From The Deployed Personnel To Monitor The Performance Of The Janitorial Personnel And Handle The Consolidation Of Daily Timecards Periodically In Preparation For The Monthly Billing To The Denr Penro Isabela. D.there Shall Be No Employer-employee Relationship Between Denr-penro Isabela And The Security Guards And/or Other Personnel Employed By The Contractor. E.the Janitorial Personnel Shall Perform The Following: 1.0 Maintain The Cleanliness And Orderliness Of The Office Premises In Accordance With The Service Standards And Conditions Taking Into Account The Following: I.protection Of Denr Isabela Properties From Damage Or Destruction In Connection With The Janitorial Activities Rendered; Ii.preservation Of Confidentiality Of Denr Isabela Records; And Iii.proper Collection And Disposal Of Garbage. 2.0 Miscellaneous Services To Be Performed Whenever Required (i.e., Logistical Assistance During Meetings And Conferences; Hauling Of Office Furniture, Fixtures And Equipment; And Other Errands Within Office Premises). 2.0 Provision Of Cleaning Tools And Equipment A. The Contractor Shall Provide, At The Minimum, The Following Cleaning Tools And Equipment Which Are Brand New Or In Good Condition: Description Quantity Equipment Heavy-duty Floor Polisher, 6 Units (1 Per Office) Heavy-duty Vacuum Cleaner (wet And Dry) 6 Units (1 Per Office) Extension Ladder (30ft) (heavy Duty) 6 Units (1 Per Office) Grass Cutter 6 Units (1 Per Office) Personal Protective Equipment Reusable Gardening Hand Gloves 9 Pairs Rubber Boots 9 Pairs Raincoat 9 Pairs Jungle Bolo 9 Pieces Gardening Trowel And Fork Set 9 Sets 3.0 Service Standards And Conditions Deployed Janitorial Personnel Shall Be Professional, Courteous And Sensitive To The Client’s Needs At All Times. The Expected Service Standards And Conditions Are As Follows: A.office Areas: 1.0 All Surfaces, Fixtures And Fittings Should Be Free From Dust, Stains And Debris; 2.0 All Waste Receptacles Empty Note: Paper, Files And Electronic Equipment Shall Not Be Removed Or Adjusted While Cleaning (where Applicable, Unless Prior Permission Has Been Obtained From The Employee Concerned). B.washroom And Toilet Areas 1.0 All Surfaces, Fixtures And Fittings Should Be Free From Dust, Stains And Debris; 2.0 All Sanitary Fittings Should Be Free From Grime, Dirt And Smear. C.each Area Shall Be Cleaned To The Services Specifications As Detailed But Not Limited In The Table Below: Areas Description Of Task Frequency* Offices/reception Areas/hall And Stairways Empty Waste Bins And Wash Out, If Required Daily Water And Maintenance Of All Indoor Plants Daily Wash Doormats/ Change Into New Doormats Daily/once A Week Bring Out Indoor Plants Once A Week Spraying Of Insecticide, Disinfectant Spray And Air Freshener Once A Week/ As Necessary** Machine Scrub And Buff Hard Floors Once A Week Wipe/clean Window Shades; Clean Inside Windows; Clean Door Jams/balusters/ Handrails; Clean Glass Walls/ Partitions Once A Week Remove Cobweb (ceiling, Lighting Fixtures, Etc.) Once A Month Wash Walls With Dirt And Stain Mark Once A Month Wet Cleaning/ Dusting/ Vacuuming Upholstered Furniture/office Chairs, Wash Draperies And Such Once A Month Cleaning And Removal Of Dry Leaves At The Roofing Of All Buildings Once A Week Sweep/dust Mop/spot Mop/buff The Floors; As Necessary** Office Spaces Damp Wipe Office Tables And Chairs Daily Damp Wipe Office Equipment I.e. Computer Screens, Keyboards, Calculator; Telephone, Desk Lamp, Filing Cabinets, Etc. Daily Remove Cobweb (ceiling, Lighting Fixtures, Etc.) Once A Month Wash Walls With Dirt And Stain Mark Once A Month Wet Cleaning/ Dusting/ Vacuuming Upholstered Furniture/office Chairs Once A Month Sweep/dust Mop/spot Mop/buff Floors As Necessary** Meeting Rooms/ Conference Room/ Multipurpose Hall Empty Paper/waste Bins, Wash Out If Required Daily Damp Dust Tabletops, Rearrange Chairs Daily Machine Scrub And Buff Hard Floors Thrice A Week Wipe/clean Window Shades, Inside Windows, Door Jambs, Glass Walls / Partitions, And Wash Curtains And Table Clothes Once A Week Remove Cobwebs On Ceiling, Lighting Fixtures, Etc. Once A Month Wash Walls, Windowsills, Surrounds And Other Vertical Ledges With Dirt And Stain Marks Once A Month Wet Clean, Dust And Vacuum Upholstered Furniture Once A Month Sweep/dust Mop/spot Mop/buff Floors As Necessary** Washrooms And Toilets Mop Clean, Disinfect And Dry Floor Daily Or As Necessary** Wash, Clean And Disinfect Urinals And Toilet Bowls Daily Or As Necessary** Empty And Wash Waste Bins Daily Or As Necessary** Refill Deodorant Cake, Toilet Tissue, Hand Soap Daily Or As Necessary** Putting Of Chemicals To Unclog Toilet Bowls And Lavatories To Maintain The Continuous Flow Of Water Daily Or As Necessary** Guest House Change/wash Beddings, Draperies And Such As Necessary** Mop Floor, Clean Rooms And Toilets, Disinfect All Areas Once A Week Disinfect Floors, Pantry Sink And Pantry Cabinets Once A Week Dust Mop/spot Mop The Floors, Pantry Sink, And Pantry Cabinets As Necessary** Records Area/ Stockrooms Clean The Floor And Remove Dusts From Equipment And Files Once A Month Office Grounds, Garden And Landscape Clear Rubbish From Path Walks, Driveways, Parking Areas, Park, Etc. Daily Water Outdoor Plants Twice Daily Trimming Of Plants Twice A Month Or As Necessary Cleaning Of Plant Boxes. Cultivation Of Garden Soil. Propagation Of Plants, Replanting And Scalloping Once A Month Miscellaneous Assist The Denr Personnel (carpenter And Plumber) In Carpentry And Plumbing Works When Necessary Assist The Denr Electrician And Technician In Performing Repairs As May Be Assigned Assist In Carrying, Hauling, And Transport Of Office Furniture, Fixtures And Equipment Provide Assistance During Meetings, Conferences And Other Events Of Denr Such As, But Not Limited To, Clean-up Drives, Denr Anniversary, Year-end Assessment And Such Assist In Cleaning, Washing And Vacuuming Government Vehicles Assist In The Weekly Or Periodic Office Clean-up Activity As Needed Note: *frequency May Be Changed During The Contract Implementation, Upon The Instruction Of The Head Of The Agency Or Its Authorized Representative. **as Necessary Means To Be Checked At Least Once A Day And Cleaned If Necessary 4.0 General Conditions A.the Deployed Personnel Shall Work Eight (8) Hours A Day, Six (6) Days A Week From Monday To Saturday. However, The Personnel May Be Requested To Provide Assistance Outside The Regular Working Hours Or During Weekends Or Holidays, Upon The Written Approval Of The Head Of The Agency Or His Duly Authorized Representative. B.the Denr Isabela Has The Right To Effect Changes In The Assignment/deployment Of The Janitors At Any Time During The Contract Period Through A Written Notice To The Contractor. Likewise, The Denr Isabela May Increase Or Decrease The Number Of Janitors As May Be Necessary And Reserves The Right To Increase, Reduce, Or Limit The Scope Of Services Of The Contractor. In Such An Event, Any Corresponding Adjustment In The Cost Shall Not Exceed The Contract Price. C.the Contractor Shall Not Reshuffle Personnel Without The Prior Clearance/approval Of The Chief, Management Services Division (chief, Msd) Which Hereby Reserves The Right To Reject Any Proposal To Reassign Personnel If Such Reassignment Is Found To Pose An Imminent Danger Or Prejudice To The Service. It Is However Understood That On Matters Of Disciplinary Action Toward The Personnel Of The Contractor, The Msd Chief Shall Cooperate With The Contractor Or Vice Versa By Means Of Mutual Consultation. D.the Contractor Shall Make Available Relievers And/or Replacements At All Times To Ensure Continuous And Uninterrupted Services. E.the Contractor Agrees That The Denr Isabela, Through The Msd Chief, Reserves The Right To Screen And Accept Or Deny The Deployment Of Any Personnel Recommended By The Contractor. F.the Contractor Shall Pay Its Personnel Not Less Than The Minimum Wage And Other Benefits Mandated By The Laws, Rules And Regulations. The Contractor Shall Provide The Janitorial Personnel Their Monthly Pay Slip Containing The Necessary Information On It. The Contractor Shall Comply With The Laws Governing Labor Standards And Employee’s Compensation. A Certificate For The Purpose Shall Be Required From The Contractor. G.the Contractor Shall Provide The Personnel With Appropriate Uniforms, Protective Gear, If Necessary, And Ensure That They Shall Observe Proper Personal Hygiene And Appear Neat And Clean At All Times. H.the Contractor Shall Ensure That Safety Shall Be The First Priority In The Performance Of Its Functions, And Avoid The Creation Of Safety Hazards Both In The Condition Of The Work Performed And While Doing The Work. I.the Contractor Shall Have At Least One (1) Reliever For The Denr Isabela Available At Any Time To Take Over In Case Some Regular Personnel Are Absent At No Extra Cost To The Denr. No Trainees Shall Be Allowed As A Reliever Even If They Are Allowed And Identified As Such. J.the Contractor Shall Ensure The Confidentiality Of Information. 5.0payment Terms A.the Contractor Shall Submit, Along With The Monthly Billing Statement, A Certified True Copy Of Duly Accomplished Payroll Sheet, Receipts, Prescribed Reports Stamped Received By Sss, Philhealth, Pag-ibig, And Ecc As Proof Of Remittances Of Employer’s And Employees’ Contributions For Sss, Philhealth Pag-ibig And Ecc Premiums Of The Janitorial Personnel Assigned To The Denr Isabela Only And The Monthly Checklist Within Five (5) Calendar Days After Every Month/cut Off. B.the Contractor In The Performance Of Its Services Shall Secure, Maintain At Its Own Expense All Registration, Licenses Or Permits Required By Law, And Shall Comply With All Pertinent Rules And Regulations. The Contractor’s Personnel Shall Take All Necessary Precautions For The Safety Of All Persons And Properties At Or Near Their Area Of Work And Shall Comply With All The Standards And Established Safety Regulations, Rules And Practices. 6.0performance Review And Assessment A.the Contractor Shall Maintain A Satisfactory Level Of Performance Throughout The Contract Period Based On The Following Set Of Performance Criteria: Performance Criteria Weight I Conformity To Technical Requirements (25) Ii Timeliness In The Delivery Of Services (25) Iii Behavior Of Personnel (courteous, Professional And Knowledgeable) (20) Iv Response To Complaints (20) V Compliance With Set Office Policies For Such Services (10) Performance Rating Passing Rate: 80 Points B.the Contractor Shall Undergo A Periodic Review Using The Above-cited Criteria To Ensure Compliance With The Technical Specifications, As Well As With The Other Terms And Conditions Imposed By The Denr Isabela During The Contract Period. C.further, A Mid-term Assessment Or Evaluation Of The Performance Of The Contractor. Based On Its Assessment, The Denr Isabela May Terminate The Contract For Failure Of The Contractor To Perform Its Obligations Thereon. 7.0deployment Of Janitor Personnel A.janitorial Personnel Shall Render Service On An 8-hour Basis, Six Days A Week, From Monday Through Saturday Excluding Regular Holidays And Sundays (313 Days/year) On A Continuing Service Within The Contract Period Proposed Deployment Schedule Area No. Of Janitors Shift Penr Office – Isabela (city Of Ilagan, Isabela) 2 2 6:00am To 3:00pm 8:00am To 5:00pm Cenro Cabagan 1 6:00am To 3:00pm Cenro Cauayan 1 6:00am To 3:00pm Cenro Naguilian 1 6:00am To 3:00pm Cenro San Isidro 1 6:00am To 3:00pm Penr Sub Office - Roxas 1 6:00am To 3:00pm Total Number 9 Note: Schedule Of Shifting May Change During The Contract Implementation Or Upon The Instruction Of The Head Of The Agency Or Its Authorized Representative. Prepared By: Recommending Approval: Miguel L. Vasquez Luz S. Soriano Supply Officer I Chief, Management Services Division Approved By: Orly T. Cariazo Penr Officer Bidder’s Undertaking I/we, The Undersigned Bidder, Having Examined The Bidding Documents Including Bid Bulletins, As Applicable, Hereby Bid To (supply/deliver/perform/comply) The Above Terms Of Reference I/we Undertake, If Our Bid Is Accepted, To Deliver The Goods/services In Accordance With The Terms And Conditions Contained In The Bid Documents, Including The Posting Of The Required Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award. Until A Formal Contract/order Confirmation Is Prepared And Signed, This Bid Is Binding On Us. ____________________________________________________________ Name Of Company (in Print) ________________________________________ Signature Of Company Authorized Representative ___________________________________________________ Name & Designation (in Print) __________________________________ Date Section Vii. Technical Specifications Technical Specifications Instruction To Bidders: Please Fill Up The Form Accordingly And Sign The Bidder’s Undertaking. Failure To Conform Will Result In A Rating Of “failed”. Project Requirements Bidder’s Statement Of Compliance Procurement Of One (1)-year Janitorial Services For The Department Of Environment And Natural Resources (denr-isabela) Provincial And Community Field Offices For Cy 2025 I Hereby Certify To Comply With The Above Technical Specifications. ____________________________________________________________ Name Of Company (in Print) ________________________________________ Signature Of Company Authorized Representative ___________________________________________________ Name & Designation (in Print) Section Viii. Checklist Of Technical And Financial Documents Checklist Of Technical And Financial Documents I.technical Component Envelope Class “a” Documents Legal Documents ⬜ (a)valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b)statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c)statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d)original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e)conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f)original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g)the Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (h)if Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii.financial Component Envelope ⬜ (i)original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (j)original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (k)[for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (l)certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity. Section Ix. Detailed Financial Breakdown Annex I Procurement Of Janitorial Services For The Department Of Environment And Natural Resources – Penro Isabela Fy 2025 Detailed Financial Breakdown (the Sum Of The Total Contract Amount Must Be Equal To The Bid Form Per Annex I) I.labor Cost 1.basic Salary (dw X No. Of Days/year/12) ____________________ 2.13th Month Pay (dw X 365/12/12) ____________________ 3.5 Days Incentive Leave (dw X 5/12) ____________________ 4.legal Holiday Premium (dwx 10/12) ____________________ 5.employees Contribution Sss (employer’s Share) (msc X 9.5%) ____________________ Philhealth (mbs X 4.5%/2) ____________________ Pag-ibig Fund ____________________ Ecc ____________________ Total Labor Per Month/janitor ____________________ Ii.administrative Over Head (not Less Than 10%) A. 10% Total Contract Cost Dole Do No. 18-a 2011 Section 9(b)(ii) ____________________ B.cost Of Supplies And Equipment For The Service ____________________ Iii.12% Vat ____________________ Rate Per Janitor/janitress ____________________ Total Contract Amount (rate Per Janitor X 9 X 12 Months) ____________________ Notes: 1.please Indicate Zero “0” Or Dash “-” For Item/s Offered For Free To The Denr. Incomplete Financial Proposal Shall Be Considered Non-responsive And Thus, Automatically Disqualified In Accordance With Section 32.2.1 (a) Of The 2016 Revised Irr Of Ra 9184. 2.rounding Off Of Digits Applies Only To The Centavo Part Which Is Nearest To The Hundredths Place (two Decimal Places). _____________________ Name Of Company (in Print) ______________________________________ Signature Of Company Authorized Representative _______________________________________________ Name And Designation (in Print) _____________________________ Date Please Use This Bid Form. Do Not Retype Or Alter Annex Ii Procurement Of Janitorial Services For The Department Of Environment And Natural Resources – Penro Isabela Fy 2025 Detailed Financial Breakdown For Various Supplies And Equipment Particulars Minimum Requirements Qty./ Unit Unit Price (php) Total (php) A. Equipment (duration Of Contract) * 1 Heavy-duty Floor Polisher (1 Per Office) 6 Units 2 Heavy-duty Vacuum Cleaner (wet And Dry) (1 Per Office) 6 Units 3 Extension Ladder (30ft) (heavy Duty) (1 Per Office) 6 Units 5 Grass Cutter (1 Per Office) 6 Units Subtotal A: Note: * To Be Returned To Service Provider After The Duration Of Contract. B. Personal Protective Equipment (start Of Contract) 1 Reusable Gardening Hand Gloves 9 Pairs 2 Rubber Boots 9 Pairs 3 Raincoat 9 Pairs 4 Jungle Bolo 9 Pieces 5 Gardening Trowel And Fork Set 9 Sets Subtotal B: Total Supplies And Equipment Cost Notes: 1)the Above Particulars Must Be Delivered And Turned Over To The General Services Unit (penro Isabela) Or Cenr Office Supply And Property Unit For Verification Purposes 2)please Indicate Zero (0) Or Dash (-) For Items Offered For Free To The Denr, Except Those Requirements By Law Or Regulations To Be Provided For. Incomplete Proposal Shall Be Considered Non-responsive And Thus, Automatically Disqualified In Accordance With Section 32.2.1(a) Of The 2016 Revised Irr Of Ra 9184 3)rounding Off Of Digits Applies Only To The Centavo Part Which Is Nearest To The Hundredths Place (two Decimal Places). _____________________ Name Of Company (in Print) ______________________________________ Signature Of Company Authorized Representative _______________________________________________ Name And Designation (in Print) _____________________________ Date

Details: Description Request For Quotation For Goods And Services Date: December 20, 2024 Purchase Request No. : 2024-289 To: All Eligible Suppliers Please Quote Your Lowest Price Inclusive Of Vat On The Item/s Listed Below, Subject To The Terms & Conditions Of This Request For Quotation (rfq) And Submit Your Quotation Duly Signed By You Or Your Authorized Representative In The Return Envelope Not Later Than The Prescribed Period. Do Not Forget To Write The Quotation No./ Purchase Request (pr) No. In Front Of The Envelope Which You Must Seal, Sign, And Submit To Asds Office, Deped Sdo Catanduanes, San Roque, Virac, Catanduanes. For Any Clarification, You May Contact Us At Telephone Phone No. 052-8114063 Or Email Address At Bac.ctd@deped.gov.ph. Delfin A. Bondad Bac Chairman _____________________________ Signature Over Printed Name Canvasser __ Terms & Conditions A. Submission Of Requirements 1. All Entries In The Rfq Form Must Be Accurate And Legibly Written. The Rfq And Other Requirements Stated Herein Shall Be Submitted In A Sealed Envelope To The Bids & Awards Committee (bac) At Asds Office, Deped Sdo Catanduanes, San Roque, Virac, Catanduanes. 2. Document Requirements: (suppliers Who Had Contract/s With Sdo Catanduanes Previously And Whose Documents Are Still Valid May No Longer Submit These) A. Philgeps Registration B. Dti/sec Registration C. Mayor’s Permit/business Permit D. Tax Clearance Certificate E. Pcab License (for Infrastructure Projects) B. Evaluation Of Quotations 1. Quotation Shall Be Compared And Evaluated Based On The Following Criteria: A. Completeness Of Submission B. Compliance With Technical Specifications C. Price (to Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable). 2. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 3. In Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated Quotation/lowest Calculated And Responsive Quotation, The Bac Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. C. Award 1. The Supplier Who Submitted The Lowest Calculated Responsive Quotation Shall Be Awarded The Purchase Order After Evaluation By The Bac. 2. Prior To Award, An Omnibus Sworn Statement Must Be Submitted By The Supplier. 3. Once Purchase Order Is Awarded, The Photocopy Of Bank Account Number Of The Supplier’s Company Must Be Submitted (preferably Land Bank, If Available) D. Delivery 1. Delivery Of Goods Shall Be Made Within 7 Calendar Days From The Date Of The Receipt Of The Purchase Order. 2. The Item/s Shall Be Delivered According To The Requirements Specified In The Technical Specifications. 3. Deliverables Shall Be Delivered To The Sdo Catanduanes Or Wherever The Project Site Is Defined, Cost To The Account Of Supplier. Risk And Title Pass From The Supplier To The Purchaser Upon Inspection, Receipt And Final Acceptance Of The Goods At Project Site.   4. Upon The Delivery Of Goods To The Project Site, The Supplier Shall Notify The Purchaser And Present The Following Documents: A. Original And 4 Copies Of The Supplier’s Invoice Showing The Goods Description, Quantity, Unit Price And Total Price. B. Original And 4 Copies Of Delivery Receipts C. Original Statement Of Accounts D. Approved Purchase Order E. Warranty Certificate E. Instructions 1. Supplier Shall Be Responsible For The Source(s) Of Its Goods/equipment And Shall Make The Deliveries In Accordance With The Schedule And Specifications Of The Award Or Purchase Order. Failure Of The Supplier To Comply With This Provision Shall Be A Ground For Cancellation Of The Award Or Purchase Order Issued To The Supplier. 2. Supplier Shall Pick-up The Purchase Order Issued In Its Favor Within Three (3) Calendar Days From The Date Of Receipt Of Notice. A Telephone Call, Text Message, Email Or Use Of Messaging App Shall Constitute An Official Notice To The Supplier. Thereafter, If The Purchase Order Remains Unclaimed, The Purchase Shall Be Cancelled. 3. Supplier Who Accepted A Purchase Order But Failed To Deliver The Required Goods Within The Time Called For In The Purchase Order Shall Be Disqualified From Participating In Deped’s Future Procurement Activities. This Is Without Prejudice To The Imposition Of Other Sanctions Prescribed Under Ra 9184 And It’s Irr Against The Supplier. 4. Rejected Deliveries Shall Be Construed As Non-delivery And Shall Be Replaced By The Supplier Subject To Liquidated Damages For Delayed Deliveries. 5. All Duties, Excise Taxes And Revenue Charges Shall Be Paid By The Supplier. 6. All Transactions Are Subject To Withholding Of Creditable Value Added Tax And/or Expanded Value Added Tax Per Revenue Regulation(s) Of The Bureau Of Internal Revenue. 7. All Pages Of The Request For Quotation Shall Be Initialed By The Bidder/supplier To Ensure That Terms And Conditions Were Read And To Protect The Bac From Any Insinuation Of Tampering With The Said Documents. F. Inspection To Confirm Their Conformity To The Technical Specifications All Deliveries By Supplier Shall Be Subject To Inspection And Acceptance By The Deped Inspectorate Team And The End-user. And, All Costs Of The Necessary Laboratory Tests Undertaken By Deped On The Goods Shall Be To The Account Of Suppliers. G. Liquidated Damages A Penalty Of One-tenth Of The Percent (0.001) Of The Total Value Of The Undelivered Goods Shall Be Charged As Liquidated Damages For Every Day Delay Of The Delivery Of The Purchased Goods. In Case The Total Sum Of Liquidated Damages Reaches Ten Percent (10%) Of The Total Contract Price, The Procuring Entity Concerned May Rescind The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. H. Warranty Warranty Shall Be For The Period Of Six (6) Months For Supplies And Materials And One Year In Case Of Equipment, Reckoned From Date Of Acceptance Of The Goods At Project Site. I. Payment One Hundred Percent (100%) Of The Contract Price Shall Be Paid To The Supplier After Acceptance Of The Goods At Project Site And Submission Of The Required Supporting Documents Provided Under Letter D. Delivery. The Bids And Awards Committee: After Having Carefully Read And Accepted Your Request For Quotation And Its Terms And Conditions, I/we Quote You On The Item/s At Price Noted In This Rfq. The Quotation Shall Be Binding Upon Us For Thirty (30) Calendar Days Reckoned From The Last Day Of Submission Indicated In The Submission Requirement. The Corresponding Award Or Purchase Order Shall Be Accepted By Us Within 3 Days From Notification By Deped Sdo Catanduanes Bac. Approved Budget Of The Contract For This Project: Php 235,720.00 Item No. Item Description Qty Unit Estimated Unit Price State Comply Or Not Comply Unit Price Total Price Procurement Of Senior High School Technical Vocational Livelihood (tvl) Track Learning Tools And Equipment (lte) 1 Alarm Clock, Digital, Overall Dimensions: 13.5 X 8 X 4.5 Cm (approx.) Material: Plastic (pe/abs) Illuminated Lcd Digital Display: Time (12/24), Calendar (mm/dd), Temperature, Alarm Status (on/off), Snooze Display Size: 10 X 5 Cm (minimum), Time Can Be Read 30 Ft Day Time. Runs On Aaa Battery Which Come Together With The Item Smooth Surface, No Sharp Edges, Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting. 3 Pc 433.75 2 Bib Apron, Sleeveless Adjustable Neck Loop Material : Polyester - Cotton Fabric Dimension : 70 To 60 Cm (minimum) With 2 Or 3 Pockets Uni-color, Dark No Sharp Edges And Loose Threads 4 Pc 306.25 3 3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges 4 Pc 260.00 4 Bed Set, Queen Size (60 X 75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 20 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges 2 Pc 6163.75 5 Bed, Single Size (w36 X L75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 13 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges 2 Pc 1993.75 6 Type: Foldable Type Ironing Board Body Shape : Standard Material : 25 Mm Tubing Approx., 0.8 Mm Thickness Board Size: 32 Inches (minimum ) Body Size :120 Cm X 30 Cm X 5 Cm Color : Any Comes With Box No Sharp Edges 3 Pc 777.50 7 Upper Material: Elastic Pvc Sizes: 7 Inches - 5pc 8 Inches - 5pc 9 Inches - 5pc 10 Inches -5pc 11 Inches - 5pc Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size 25 Pc 712.50 8 Brush, Floor Scrubbing, Angled Long Handle Bristle Material : Plastic, Stiff Handle Material : Metal Tubular Corrosion Reistant, Overall Length : 120 Cm. (minimum) Bristle Length : 5 Cm (=/- 1cm) Scrubbing Surface : 25 X 6 Cm (+/-1 Cm) No Sharp Edges 3 Pc 211.25 9 Water Bucket Bucket Material : Hard Plastic, Round Body Capacity : 10 To 12 Liters Handle Material : Steel Smooth And Glossy Surface, No Sharp Edges 3 Pc 186.25 10 Carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material :plastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges 3 Pc 186.25 11 Carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material : Hard Plastic ,(abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width : 8 Inches (minimum) Capacity (volume) : 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting. 4 Pc 9375.00 12 Housekeeping Cart Trolley Equipped With Three-shelves With Steel/laminated Panels Single Door, Top Layer With Divider, Bag Holder, And 4 Wheels Cart Frame: Steel, Powder Coated Wheels: 2non-swivel 2 Swivel, 6 Inch Diameter, Non-markings Overall Dimensions : Rectangular 90 X 48 X 1010 Cm (minimum) Comes With Accessory Linen Bag Smooth Surface, No Sharp Edges 2 Pc 4873.75 13 Caution Sign, A Shape-2 Panel Self Standing, With D-handle, Collapsible For Easy Storage Material : High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color : Yellow Print Description : "caution: Wet Floor" On One Side "cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100 -120 Mm X 50 -70 Mm, Arial Smooth Surface, No Sharp Edges 5 Pc 220.00 14 Lint Free Cleaning Cloths Material : Cotton Dimensions : Rectangular 16 X 26 Inch 2 Pc 106.25 15 Coffee Maker, Electric Material: Metal, Plastic, Glass Capacity: 6 Cups (minimum) Detachable Tank, With Water Level Indicator Non-stick Warming Plate : Removable And Washable Filter Non-drip Valve : Lighted On/off Switch Power Supply: 220 V -240 V Ac 50/60 Hz , 500w Minimum Comes With A Heat Resistant Glass Pitcher With A 1 Meter (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines 4 Pc 1161.25 16 Dust Pan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges 2 Pc 73.75 17 Anti-static Duster Duster Material : Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material : Hard Plastic, No Sharp Edges 3 Pc 206.25 18 Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service 4 Pc 1542.50 19 1.for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 11.includes With User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment 12.1 Year Warranty Parts And Service 13.the Item Must Be Branded And Have Good Quality 5 Pc 2475.00 20 Flashlight Led 1,000 Lumens (minimum), Color : White , Battery: Rechargeable, At Least 3,500 Mah , Can Be Used Also With 3 X Aaa Batteries; Body: Aluminum Alloy, No Sharp Edges Dimensions : 5 Inches X 1 Inch Diameter (minimum) Operating Duration Of Battery When Fully Charged : At Least 2 Hours; Includes 220/240vac, 50/60hz Power Adapter /charger And User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, With 1 Year Warranty 3 Pc 1998.75 21 Clothes Flat Iron, Electric Material : Metal /plasic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension : (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains : Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. 3 Pc 411.25 22 1. Material: Cellulose And A Scouring Pad On One Side 2. Dimension: Length : 140 - 180 Mm ; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm 3. The Item Must Be Of Good Quality 2 Pc 73.75 23 1.bucket / Tub Material : Hard Plastic, (ps) Polystyrene 2.bucket / Tub Color : Any Color 3.capacity (gallons) : 3 Gal. (minimum) Comes With A Cover 4.the Item Must Have Good Quality 4 Pc 1000.00 24 1.heavy-duty Latex-free Vinyl Rubber Gloves 2.thickness : 4 Mil 3.color : Any Color 4.size : Medium 5.other Features: Acid/solvent Resistant. 6.the Item Must Be Of Good Quality 3 Pc 50.00 25 Safety Goggles, Clear Polycarbonate - One Piece Lens With 180° Panoramic View, Non-fog Size/dimension: L 17 - 18.5 Cm X W 8 Cm X D 5-7.5 Cm High Impact Resistant, Ansi "z87" Compliant Firm And Comfortable Seal Around Forehead, Cheeks, Nose And Temples Protects Against Splash, Chemicals, Dust Adjustable Head Strap Shall Bear Mark Z87 Embossed Or Engraved Or Etched On The Item. Smooth Surface, No Sharp Edges 3 Pc 193.75 26 Electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating : 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service) 3 Pc 935.00 27 Water Hose Material: Pvc Fiber Reinforced, Three (3) Layers; Any Color; Hose Length: 50 Feet; Hose Diameter: 5/8 Inches; Pressure Capacity: 200 Pounds Per Square Inch (minimum); Fitted With Male And Female Brass Couplers (nh, 11.5 Tpi) For Spray Nozzle No Sharp Edges 3 Pc 1436.25 28 Electric Kettle Cordless (with Pouring Spout), Hinged Lid, Detachable From And Can Rotate On Its Corded Base Material : Round Stainless Body, Plastic Handle, Lid And Base Capacity : 1.5 To 2 Liter Automatic Shut - Off, With Power Indicator Light Power Rating: 220//240vac, 50/60hz, 1000 -1600 Watts Base With A 50 Cm (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges; Dti-bps Certified Comes With English Manual That Contains: Operation Procedure, Maintenance And Safety Guide. The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item. 3 Pc 521.25 29 3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges 3 Pc 412.50 30 Emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector Power Rating: 220 -240 Vac , 50/60 Hz 20-24 Hours Charge Time Dimensions: Rectangular 27 X 7 X 27 Cm (approx.) Sooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item. 4 Pc 782.50 31 Wall Mirror With Frame Flat Glass Mirror, 2 Mm Thick (minimum), Clear With No Distortion Frame: Wood Or Plastic Commercial Finish Rectangular Shape, 3600 Sq.cm (minimum) Includes Mounting Accessories Smooth Surface, No Sharp Edges 3 Pc 1498.75 32 Mop, Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length : 40 (minimum), No Sharp Edges 3 Pc 262.50 33 Electric Floor Polisher With Accessories Material: Stainless Steel, Aluminum Alloy Handle: Stainless Tube, Adjustable Height 1 Meter Long (approximate), With Dual Switch Lever Size/capacity :13 Inch (minimum) Diameter Power Supply: 220/240 Vac, 50/60 Hz. Power: 1/3 Hp (minimum) Rotation Speed : 160 Rpm (minimum) Heavy Duty (royal) Power Cord Length : 12 Meters (minimum) With Type A Plug (or Providing 10a Plug Adapter Is An Option) With Pair Of Rubber Wheels, Smooth Surface, No Sharp Edges Comes With Pad Holder, 2 Pc - Polishing Brush And 3 Pc - Floor Polishing Pads Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, Brand Name And Electric Rating Permanently Mark On The Item, With 1 Year Warranty Parts And Service The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 3 Pc 4768.75 34 Shelving, Open, Knockdown Type, Adjustable Shelves Metal Powder Coated Frame Number Of Shelves : 5 Overall Dimensions : 85 X 30 X 180 Cm(minimum) Sturdy Connection, No Wobble Smooth Surface, No Sharp Edges 4 Pc 886.25 35 Dish Sponge, Cellulose, Non-scratch Dimensions : 5 X 3 X 1 Inch (minimum) Branded 3 Pc 56.25 36 Barber/salon Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded 4 Pc 43.75 37 Squeegee, Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges 3 Pc 165.00 38 Mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color : Yellow With 3 Inches Non-marking Rubber Casters "caution" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges 3 Pc 2672.50 39 Step Ladder Material: Aluminum U Channel Capacity: 250 Lbs (minimum) Type: Flatform Type Number Of Step: 6 (including Top Step) Reach Height: 6 To 8 Feet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum) Twin Steps With Gripped Treads To Prevent Slipping Step Braces On Top And Bottom Step Heavy Duty Aluminum Foot Bracket With Slip-resistant Foot Pad With User's Manual In English Which Includes: A. Parts Manual With Labels, 3 Pc 1481.25 40 Electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material : Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity : 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 3 Pc 2707.50 41 1. Front Load Electric Washer, Laundry 2. Electronic Control, Digital Indicator Display , Transparent Glass Door 3. Body Material : Steel, Powder Coated, Any Color 4. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) 5. Drum Material : Stainless Steel 6. Capacity : 8 Kg (minimum) 7. Spin Speed : 1200 Rpm (minimum) 8. Power Rating: 220 /240vac, 50/60 Hz. 9. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) 10. Smooth Surface, No Sharp Edges 11. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9.includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures 12.the Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service 13. With Service Centers Located In Major Cities In The Philippines. 14.the Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 2 Pc 24987.50 42 White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges 3 Pc 580.00 *** Note: Any Interlineations, Alteration/ Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. Supplier’s Company Name: ___________________________________________________________ Philgeps Registration Number: _______________________________ Tin ___________________ Address: ___________________________________________________________________________________ Telephone/cellphone Number: __________________ Email: ________________________ Supplier Or Authorized Representative: ____________________________________________________ Signature Over Printed Name: ______________________________________ Date: ____________________ Note: A Special Power Of Attorney Is Required For The Authorized Representative *************

Details: Combined Synopsis-solicitation For Commercial Products And Commercial Services effective Date: 03/15/2023 revision: 01 description this Is A Combined Synopsis/solicitation For Commercial Products And Commercial Services Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products And Commercial Services, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Solicitation Is Issued As An Rfq. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular Fac 2024-02 (eff. 12/22/2023) this Solicitation Is A Total Set-aside For Sdvosb Small Business. the Associated North American Industrial Classification System (naics) Code For This Procurement Is 811310 Commercial And Industrial Machinery And Equipment (except Automotive And Electronic) Repair And Maintenance With A Small Business Size Standard Of $12.0 Million. The Fsc/psc Is J059 Maintenance, Repair, And Rebuilding Of Equipment-electrical And Electronic Equipment Components. the James J. Peter Va Medical Center At 130 West Kingsbridge Rd., Bronx Ny Is Seeking Replacements Of Batteries And Radiators For Their Generac Generators To Include All Installation Parts And Testing To Ensure Replacement Parts Are Compliant And Functioning. all Interested Companies Shall Provide Quotations For The Following: Line-item Number, Description Details, Quantity, Unit Of Measure, Unit Of Price, Total Price, And Grand Total Price. please Ensure That Your Quote Covers The Cost For Everything Requested In The Sow. We Must See The Breakdown Of Every Line Item. services statement Of Work replace Batteries And Radiators for Generac Generators 1. Background engineering Service Is Seeking To Replace The Existing Batteries, Radiators, And Appurtenances For The Generac Generators Units 1, 2, 4, And 5 With New Batteries, Radiators, And Appurtenances. The Information For The Generac Generators Is As Follows: generator rating model fuel Type serial location areas Serves generac#1 600kw/750kva 12458200100 natural Gas/#2 Diesel 2108384 motor Pool Area life Safety, Critical, Essential Equipment, Penthouse Fans, Fire Pump generac#2 600kw/750kva 12458200100 natural Gas/#2 Diesel 2108823 warehouse Loading Area life Safety, Critical, Essential Equipment, Penthouse Fans, Fire Pump generac#4 600kw/750kva 12458200100 natural Gas/#2 Diesel 2108822 warehouse Loading Area life Safety, Critical, Essential Equipment, Penthouse Fans, Fire Pump generac#5 600kw/750kva 12458200100 natural Gas/#2 Diesel 2108814 warehouse Loading Area life Safety, Critical, Essential Equipment, Penthouse Fans, Fire Pump 2. Place Of Performance department Of Veterans Affairs James J. Peters Va Medical Center (jjp Vamc) 130 West Kingsbridge Road Bronx Ny 10468 3. Period Of Performance the Contractor Shall Complete All Work Within 8 Weeks From Ntp. 4. Type Of Contract firm Fixed Price (ffp) 5. Environmental Procedures the Contractor Shall Adhere To All Federal, State, And Local Codes And Requirements For Campus At All Times. 6. Site Conditions a. All Work Is To Be Coordinated With Va Poc. b. This Is An Occupied Facility. c. A Material And Equipment Staging Area Is To Be Coordinated And Confirmed With The Va Poc. The Staging Area Is To Be Considered Unsecure. d. The Contractor Is To Leave No Area Unsafe At The End Of The Working Day. 7. Hours Of Operation (applicable When Working At A Va Site) work Shall Be Completed During Normal Business Hours, Monday Through Friday, 8:00 Am To 4:00 Pm. contractor May For His/her Convenience Request Authorization In Advance From The Cor To Work Outside Of Regular Working Hours Of Regular Workdays At No Additional Cost To The Medical Center. Authorization Shall Be At The Discretion Of The Cor. the Contractor Is Not Required To Perform Services On The Following Holidays: new Year S Day Labor Day martin Luther King Jr. S Birthday Columbus Day washington's Birthday Veteran S Day memorial Day Thanksgiving Day juneteenth National Independence Day Christmas Day independence Day 8. Housekeeping The Project Site Shall Be Kept In A Neat, Orderly, And Safe Condition At All Times. 9. Exclusions the Contractor Shall Not Be Liable For Any Loss, Damage Or Delay Caused By Acts Of Fire, Explosion, Floods, Riot, Civil Commotion, War, Act Of God, Or By Any Cause Beyond His/her Reasonable Control, Nor Shall He/she Be Liable For Consequential Damages From Such Causes. The Following Work Is Specifically Excluded From This Contract: repair Or Replacement Made Necessary Due To The Negligence Or Misuse Of The Equipment By Persons Other Than The Contractor, His/her Representatives Or His/her Employees. the Contracting Officer Must Approve, In Advance, Any Extra Charge Work Attributed To Vandalism Or Misuse. No Invoice Will Be Paid Without Prior Approval. any Repairs Due To Misuse Or Negligence Shall Be Billed According To The Labor Rate Specified In The Pricing Schedule. Parts Will Be Billed At Actual Invoiced Cost. 10. Security Requirements contractor Personnel Must Have In Their Possession For Inspection By Va Police Department A Valid State Or Government Issued Identification Such As Drivers License Or Passport. personnel May Be Required To Surrender Their Id To The Va Police To Obtain A Temporary Day Pass At The Discretion Of Va Police. Id Will Be Returned Upon Leaving Us Government Property. the Contractor Shall Not Have Access To The Department Of Veterans Affairs Computer System. 11. Government Furnished Items, Services & Responsibilities, And Definitions contracting Officer (co): The Contracting Officer Has The Overall Responsibility For The Administration Of This Contract. He/she, Alone, Without Delegation, Is Authorized To Take Action On Behalf Of The Medical Center To: Amend, Modify Or Deviate From The Contract Terms, Conditions, Requirements, Specifications, Details And/or Delivery Schedules. However, He/she May Delegate Certain Other Responsibilities To His/her Authorized Representatives. contracting Officer's Representative (poc): The Service Line Poc Will Assist The Co In The Discharge Of His/her Responsibilities. The Responsibility Of The Poc Includes But Are Not Limited To: Determining The Adequacy Of Performance By The Contractor In Accordance With The Terms And Conditions Of This Contract; Acting As The Medical Center's Representative In Charge Of The Work At The Site; Ensuring The Compliance With Contract Requirements Insofar As The Work Is Concerned; And Advising The Co Of Any Factors Which May Cause Delay In Performance Of The Work. 12. Scope Of Work: the Contractor Shall Furnish All Material, Labor, Supervision, Tools, And Equipment Necessary To Perform The Following Work For The Generac Generator Units 1, 2, 4, And 5(oem Equipment As Per The Manufacturer S Recommendations): a) Batteries And Appurtenances: perform Lock Out Procedures. remove & Install New Batteries, Air Filters, Fan Belts, Fuel Lines, Turbo Oil Return Lines, And Jacket Water Heater Hoses. test Run Unit For Proper Operation. Place Unit Back Into Auto With Breaker Closed. radiators And Appurtenances: all Work To Replace Radiators For The Generac Generators Units 1, 2, 4, And 5. pressure Test System. test Run Unit And Top Off Coolant As Needed. clean Work Area. once The Battery Installation Is Completed The Contractor Shall Test The Batteries And Radiators And Provide A Written Report Of Results To The Va Poc To Confirm Proper Installation. 14. Submittals: a. Submit, For Review And Approval To The Va Poc, The Manufacturers/supplier S Spec Sheets, Shop Drawings (if Requested), And Any Other Requested Information For All Materials To Be Used As Part Of This Project. b. Submit Only Materials Which Are Known To Be Fully Compatible With The Actual Installation Conditions. 15. General Safety Requirements the Contractor Is Responsible And Shall Continue Management And Implementation Of A Safety And Health Program Throughout Duration Of The Project. the Contracting Officer And Va Staff Reserve The Right To Suspend Work When Patient, Staff And Supplier's Safety And Health Program Is Inadequate Or Non-complying. the Contractor Shall Provide All Personal Protective Equipment For The Workers As Per The Requirement Of The Site. Work Will Be Stopped In Case The Proper Protection Equipment Is Not Found With The Workers And The Lapse Of Time Shall Be At The Supplier S Expense. all Work Must Be In Compliance With Osha Safety Standards And Nfpa Electrical Work Requirements. The Contractor Shall Also Be Familiar With Working On All Applicable Electrical Equipment. 16. Guarantee & Warranty the Contractor Shall Guarantee That All Work Performed Will Be Free From All Defects In Workmanship And Materials And That All Installation Will Provide The Capacities And Characteristics Specified. The Contract Further Guarantees That If, During A Period Of One Year From The Date Of The Certificate Of Completion And Acceptance Of The Work, Any Such Defects Will Be Repaired By The Contractor At His Own Cost. final Inspection Is To Be Done By The Contractor And Va Service Line Poc. the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html. the Following Solicitation Provisions Apply To This Acquisition: far 52.212-1, Instructions To Offerors Commercial Products And Commercial Services (sep 2023) addendum To Far 52.212-1 Instructions To Offerors Commercial Products And Commercial Services (sep 2023) provisions That Are Incorporated By Reference (by Citation Number, Title, And Date), Have The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Version Of Far 52.212-1 In The Addendum Is Tailored For Simplified Acquisition Procedures And Supersedes The Current Version Of Far 52.212-1 Contained In The Far. the Following Provision Is Incorporated Into 52.212-1 As An Addendum To This Solicitation: 52.252-1 Solicitation Provisions Incorporated By Reference (feb 1998) 52.204-7 System For Award Management (oct 2018) 52.204-16 Commercial And Government Entity Code Reporting (aug 2020) 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov2021) 52.204-29 Federal Acquisition Supply Chain Security Act Orders-representations And Disclosures (dec2023). 52.212-2 Evaluation-commercial Products And Commercial Services (nov 2021) 52.212-3 Offeror Representations And Certifications Commercial Products And Commercial Services (nov2023) 852.252-70 Solicitation Provisions Or Clauses Incorporated By Reference (jan 2008) (end Of Addendum Far 52.212-1) far 52.212-1 Instructions To Offerors Commercial Products And Commercial Services (sept 2023) (a)â north American Industry Classification System (naics) Code And Small Business Size Standard.â the Naics Code(s) And Small Business Size Standard(s) For Thisâ acquisitionâ appear Elsewhere In Theâ solicitation. However, The Small Business Size Standard For A Concern That Submits Anâ offer, Other Than On Aâ constructionâ or Serviceâ acquisition, But Proposes To Furnish An End Item That It Did Not Itself Manufacture, Process, Or Produce Is 500 Employees, Or 150 Employees Forâ information Technologyâ value-added Resellers Under Naics Code 541519, If Theâ acquisition (1)is Set Aside For Small Business And Has A Value Above Theâ simplified Acquisition Threshold; (2)uses Theâ hubzoneâ price Evaluation Preference Regardless Of Dollar Value, Unless Theâ offerorâ waives The Price Evaluation Preference; Or (3)is An 8(a),â hubzone, Service-disabled Veteran-owned, Economically Disadvantaged Women-owned, Or Women-owned Small Business Set-aside Or Sole-source Award Regardless Of Dollar Value. (b)â submission Ofâ offers. Submit Signed And Datedâ offersâ to The Office Specified In Thisâ solicitationâ at Or Before The Exact Time Specified In Thisâ solicitation.â offersâ mayâ be Submitted On Theâ sf 1449, Letterhead Stationery, Or As Otherwise Specified In Theâ solicitation. As A Minimum,â offersâ mustâ show (1)â theâ solicitationâ number; 36c24224q0355 (2)â the Time Specified In Theâ solicitationâ for Receipt Ofâ offers; (3)â the Name, Address, And Telephone Number Of Theâ offeror; (4)â a Technical Description Of The Items Being Offered In Sufficient Detail To Evaluate Compliance With The Requirements In Theâ solicitation. Thisâ mayâ include Product Literature, Or Other Documents, If Necessary; (5)â terms Of Any Expressâ warranty; (6)â price And Any Discount Terms; (7)â "remit To" Address, If Different Than Mailing Address; (8)â a Completed Copy Of The Representations And Certifications At Federalâ acquisitionâ regulation (far)â 52.212-3â (see Farâ 52.212-3(b) For Those Representations And Certifications That Theâ offerorâ shallâ complete Electronically); (9)â acknowledgment Ofâ solicitationâ amendments; (10)â past Performanceâ information, When Included As An Evaluation Factor, To Include Recent And Relevant Contracts For The Same Or Similar Items And Other References (including Contract Numbers, Points Of Contact With Telephone Numbers And Other Relevant Information); And (11)â if Theâ offerâ is Not Submitted On Theâ sf 1449, Include A Statement Specifying The Extent Of Agreement With All Terms, Conditions, And Provisions Included In Theâ solicitation.â offersâ that Fail To Furnish Required Representations Or Information Or Reject The Terms And Conditions Of Theâ solicitationâ mayâ be Excluded From Consideration. (c)â period For Acceptance Ofâ offers. Theâ offerorâ agrees To Hold The Prices In Itsâ offerâ firm For 30 Calendar Days From The Date Specified For Receipt Ofâ offers Unless Another Time Period Is Specified In An Addendum To Theâ solicitation. (d)â product Samples. When Required By Theâ solicitation, Product Samplesâ shallâ be Submitted At Or Prior To The Time Specified For Receipt Ofâ offers. Unless Otherwise Specified In Thisâ solicitation, These Samplesâ shallâ be Submitted At No Expense To The Government, And Returned At The Sender S Request And Expense, Unless They Are Destroyed During Preaward Testing. (e)â multipleâ offers.â offerorsâ are Encouraged To Submit Multipleâ offersâ presenting Alternative Terms And Conditions, Including Alternativeâ line Itemsâ (provided That The Alternativeâ line Itemsâ are Consistent With Farâ subpartâ  4.10), Or Alternativeâ commercial Productsâ orâ commercial Servicesâ for Satisfying The Requirements Of Thisâ solicitation. Eachâ offerâ submitted Will Be Evaluated Separately. (f)â late Submissions, Modifications, Revisions, And Withdrawals Ofâ offers. (1)â offerorsâ are Responsible For Submittingâ offers, And Any Modifications, Revisions, Or Withdrawals, To Reach The Government Office Designated In Theâ solicitationâ by The Time Specified In Theâ solicitation. If No Time Is Specified In Theâ solicitation, The Time For Receipt Is 4:30 P.m., Local Time, For The Designated Government Office On The Date Thatâ offersâ or Revisions Are Due. (2) (i)â anyâ offer, Modification, Revision, Or Withdrawal Of Anâ offerâ received At The Government Office Designated In Theâ solicitationâ after The Exact Time Specified For Receipt Ofâ offersâ is "late" And Will Not Be Considered Unless It Is Received Before Award Is Made, Theâ contracting Officerâ determines That Accepting The Lateâ offerâ would Not Unduly Delay Theâ acquisition; And- (a)â if It Was Transmitted Through Anâ electronic Commerceâ method Authorized By Theâ solicitation, It Was Received At The Initial Point Of Entry To The Government Infrastructure Not Later Than 5:00 P.m. One Workingâ dayâ prior To The Date Specified For Receipt Ofâ offers: Or (b)â there Is Acceptable Evidence To Establish That It Was Received At The Government Installation Designated For Receipt Ofâ offersâ and Was Under The Government S Control Prior To The Time Set For Receipt Ofâ offers; Or (c)â if Thisâ solicitationâ is A Request For Proposals, It Was The Only Proposal Received. (ii)â however, A Late Modification Of An Otherwise Successfulâ offer, That Makes Its Terms More Favorable To The Government, Will Be Considered At Any Time It Is Received Andâ mayâ be Accepted. (3)â acceptable Evidence To Establish The Time Of Receipt At The Government Installation Includes The Time/date Stamp Of That Installation On Theâ offerâ wrapper, Other Documentary Evidence Of Receipt Maintained By The Installation, Or Oral Testimony Or Statements Of Government Personnel. (4)â if Anâ emergencyâ or Unanticipated Event Interrupts Normal Government Processes So Thatâ offersâ cannot Be Received At The Government Office Designated For Receipt Ofâ offersâ by The Exact Time Specified In Theâ solicitation, And Urgent Government Requirements Preclude Amendment Of Theâ solicitationâ or Other Notice Of An Extension Of The Closing Date, The Time Specified For Receipt Ofâ offersâ will Be Deemed To Be Extended To The Same Time Ofâ dayâ specified In Theâ solicitationâ on The First Workâ dayâ on Which Normal Government Processes Resume. (5)â offersâ mayâ be Withdrawn By Written Notice Received At Any Time Before The Exact Time Set For Receipt Ofâ offers. Oralâ offersâ in Response To Oralâ solicitationsâ mayâ be Withdrawn Orally. If Theâ solicitationâ authorizes Facsimileâ offers,â offersâ mayâ be Withdrawn Via Facsimile Received At Any Time Before The Exact Time Set For Receipt Ofâ offers, Subject To The Conditions Specified In Theâ solicitationâ concerning Facsimileâ offers. Anâ offerâ mayâ be Withdrawn In Person By Anâ offerorâ or Its Authorized Representative If, Before The Exact Time Set For Receipt Ofâ offers, The Identity Of The Person Requesting Withdrawal Is Established And The Person Signs A Receipt For Theâ offer. (g)â contract Award (not Applicable To Invitation For Bids). The Government Intends To Evaluateâ offersâ and Award A Contract Without Discussions Withâ offerors. Therefore, Theâ offeror S Initialâ offerâ shouldâ contain Theâ offeror S Best Terms From A Price And Technical Standpoint. However, The Government Reserves The Right To Conduct Discussions If Later Determined By Theâ contracting Officerâ to Be Necessary. The Governmentâ mayâ reject Any Or Allâ offersâ if Such Action Is In The Public Interest; Accept Other Than The Lowestâ offer; And Waive Informalities And Minor Irregularities Inâ offersâ received. (h)â multiple Awards. The Governmentâ mayâ accept Any Item Or Group Of Items Of Anâ offer, Unless Theâ offerorâ qualifies Theâ offerâ by Specific Limitations. Unless Otherwise Provided In The Schedule,â offersâ mayâ not Be Submitted For Quantities Less Than Those Specified. The Government Reserves The Right To Make An Award On Any Item For A Quantity Less Than The Quantity Offered, At The Unit Prices Offered, Unless Theâ offerorâ specifies Otherwise In Theâ offer. (i)â availability Of Requirements Documents Cited In Theâ solicitation. (1) (i)â the Gsa Index Of Federal Specifications, Standards And Commercial Item Descriptions, Fpmr Part 101 29, And Copies Of Federal Specifications, Standards, And Product Descriptions Can Be Downloaded From The Assist Website Atâ https://assist.dla.mil. (ii)â if The General Services Administration, Department Of Agriculture, Or Department Of Veterans Affairs Issued Thisâ solicitation, A Copy Of Specifications, Standards, And Commercial Item Descriptions Cited In Thisâ solicitationâ mayâ be Obtained From The Address In Paragraph (i)(1)(i) Of This Provision. (2)â most Unclassified Defense Specifications And Standardsâ mayâ be Downloaded From The Assist Website Atâ https://assist.dla.mil. (3)â defense Documents Not Available From The Assist Websiteâ mayâ be Requested From The Defense Standardization Program Office By (i)â using The Assist Feedback Module (â https://assist.dla.mil/ Feedback); Or (ii)â contacting The Defense Standardization Program Office By Telephone At 571 767 6688 Or Email Atâ assisthelp@dla.mil. (4)â nongovernment (voluntary) Standardsâ mustâ be Obtained From The Organization Responsible For Their Preparation, Publication, Or Maintenance. (j)â unique Entity Identifier. (applies To Allâ offersâ that Exceed Theâ micro-purchase Threshold, Andâ offersâ at Or Below Theâ micro-purchase Thresholdâ if Theâ solicitationâ requires The Contractor To Beâ registered In The System For Award Management (sam).) Theâ offerorâ shallâ enter, In The Block With Its Name And Address On The Cover Page Of Itsâ offer, The Annotation "unique Entity Identifier" Followed By Theâ unique Entity Identifierâ that Identifies Theâ offeror's Name And Address. Theâ offerorâ alsoâ shallâ enter Itsâ electronic Funds Transfer (eft) Indicator, If Applicable. The Eft Indicator Is A Four-character Suffix To Theâ unique Entity Identifier. The Suffix Is Assigned At The Discretion Of Theâ offerorâ to Establish Additional Sam Records For Identifying Alternative Eft Accounts (see Farâ subpartâ  32.11) For The Same Entity. If Theâ offerorâ does Not Have Aâ unique Entity Identifier, Itâ shouldâ contact The Entity Designated Atâ www.sam.govâ forâ unique Entity Identifierâ establishment Directly To Obtain One. Theâ offerorâ shouldâ indicate That It Is Anâ offerorâ for A Government Contract When Contacting The Entity Designated Atâ www.sam.govâ for Establishing Theâ unique Entity Identifier. (k)â [reserved] (l) Requests For Information. The Co Will Not Notify Unsuccessful Quoters That Responded To This Request For Quotation (rfq). However, Quoters May Request Information On Purchase Order(s) Resulting From This Solicitation With The Co. questions: Request For Information (rfi)/questions Shall Be Submitted In Writing Via Email To Lorraine.hussain@va.gov. Telephonic Questions Will Not Be Accepted. Request For Information/questions Will Not Be Accepted After February 9th, 2024, 10:00 Am Est. Questions Will Be Answered In An Amendment To The Solicitation. submission Instructions: Technical Packages (proposals) Must Be Received Not Later Than February 20, 2024, 3:00 Pm Est. The Government Will Only Accept Electronic Submissions Via Email. Send All Quotations To Lorraine.hussain@va.gov. The Email Subject Line Must Identify Solicitation 36c24224q0355. Late Submissions Shall Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). offers That Do Not Adhere To These Instructions May Be Determined To Be Incomplete And, Therefore, Risk Being Rejected Without Further Consideration For Award. Offer Submissions Shall Include: a. Completed Acknowledgement Of Amendments Sections (if Applicable). b. A Technical Submission To Describe The Offeror S Capability And Experience In Delivering The Services In The Statement Of Work (sow) Via 52.212-2 Evaluation Of Commercial Items Section. c. Past Performance Information Via 52.212-2 Evaluation Section. d. Completed Section Price/cost Schedule. e. Offers That Fail To Furnish Required Representation Or Information Or Reject The Terms And conditions Of The Solicitation Will Be Excluded From Consideration. (end Of Provision) 2. Far 52.212-2, Evaluation Commercial Products And Commercial Services (nov 2021) addendum To 52.212-2 Evaluation Commercial Products And Commercial Services basis For Award. The Government Will Award A Contract Resulting From This Solicitation To The Responsible Quoter Whose Quotation Conforming To The Solicitation Will Be Most Advantageous And Best Value To The Government, Given Price And Other Factors Considered. Comparative Analysis May Be Used. The Following Factors Shall Be Used To Evaluate Quotations: technical Capability: Technical Capability Is Defined As An Offeror S Ability To Satisfy The Solicitation S Requirements, Providing The Highest Quality Service To The Specified Facilities. The Technical Capability Will Be Evaluated To The Extent To Which It Can Meet And/or Exceed The Government S Requirements As Outlined In The Sow, Solicitation, And Based On The Information Requested In The Instructions To Quoters Section Of The Solicitation. the Contractor Must Demonstrate In Their Technical Capability The Understanding Of This Requirement Needs By Providing A Capability Statement With Relevance Of The Scope Of Work Regarding The Medrad Preventative Maintenance As Stated In The Sow. specific Scope Of Work: The Quoter Will Be Evaluated On How Well Their Technical Capability Statement Demonstrates How The Vendor Will Meet The Needs Of This Requirement For Medrad Preventative Maintenance As Specified In Scope Of Work. See The Sow. technical Experience: The Quoter Will Be Evaluated On How Well Their Technical Experience Reflects That The Offeror Is A Firm Who Regularly Is Engaged In The Performance Of Work As Stated In Scope Of Work And Complexity. The Offeror's Experience Will Be Evaluated On Their Proficiency In Performance Of The Duties As Requested. authorization: Provide Documentation The Vendor Performing The Services Have Been Trained, Authorized And Licensed By Bayer Healthcare To Provide Preventative Maintenance And Calibration On Equipment Specified In Sow. past Performance: The Offeror Will Provide At A Minimum Three Past Performance Of Similar Scope Or Complexity. Information To Include A Description Of Work Done. The Past Performance Evaluation Will Assess The Relative Risks Associated With A Quoter S Likelihood Of Success In Fulfilling The Solicitation S Requirements As Indicated By The Quoter S Record Of Past Performance. The Past Performance Evaluation May Be Based On The Contracting Officer S Knowledge Of And Previous Experience With The Service Being Acquired; Customer Surveys, And Past Performance Questionnaire Replies; Contractor Performance Assessment Reporting System (cpars) At Http://www.cpars.gov/; Or Any Other Reasonable Basis. price: The Government Will Evaluate The Price By Adding The Total Of All Line-item Prices, Including All Options. The Total Evaluated Price Will Be That Sum. evaluation Approach. The Government Will Evaluate Quotations Using The Comparative Evaluation Process Outlined In Far 13.106-2 (b) (3), Where Quotations Will Be Compared To One Another To Determine Which Provides The Best Benefit To The Government. The Government Reserves The Right To Consider A Quotation Other Than The Lowest Price That Provides Additional Benefit(s). Quotations May Exceed Minimum Requirements Of The Solicitation. The Government Reserves The Right To Select A Quotation That Provides Benefit To The Government That Exceeds The Minimum Requirements Of The Solicitation But Is Not Required To Do So. Each Response Must Meet The Minimum Requirements Of The Solicitation. The Government Is Not Requesting Or Accepting Alternate Quotations. The Evaluation Will Consider The Following: (end Of Addendum To Far 52.212-2) far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services (nov 2023) offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. the Following Contract Clauses Apply To This Acquisition: far 52.212-4, Contract Terms And Conditions Commercial Products And Commercial Services (nov 2023) addendum To Far 52.212-4 Show Far Clauses Followed By Vaar Clauses In Numeric Order. List All Clauses Incorporated By Reference In Numeric Order Under 52.252-2 (see Below), Starting First With Far And Followed By Vaar. 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders-commercial Products And Commercial Services (dec2023) 52.252-2 Clauses Incorporated By Reference (feb 1998) 52.204-13 System For Award Management Maintenance (oct 2018) 52.204-18 Commercial And Government Entity Code Maintenance (aug 2020) 852.211-72 Technical Industry Standards (nov2018) 852.219-73 Va Notice Of Total Set-aside For Certified Service-disabled Veteran-owned Small Businesses (jan2023) (deviation) 852.219-75 Va Notice Of Limitations On Subcontracting-certificate Of Compliance For Services And Construction (jan2023) (deviation) 852.232-72 Electronic Submission Of Payment Requests (nov 2018) 852.242-71 Administrative Contracting Officer (oct 2020) (end Of Addendum To Far 52.212-4) far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Products And Commercial Services (nov 2023) the Following Subparagraphs Of Far 52.212-5 Are Applicable: 52.204-10, Reporting Executive Compensation & First-tier Subcontract Awards (jun 2020) 52.204-27, Prohibition On A Bytedance Covered Application (jun 2023) 52.209-6, Protecting The Government S Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment (nov 2021) 52.219-6, Notice Of Total Small Business Set-aside (nov 2020) 52.219-28, Post Award Small Business Program Rerepresentation (sep 2023) 52.222-3, Convict Labor (jun 2003) 52.222-21, Prohibition Of Segregated Facilities (apr 2015) 52.222-26, Equal Opportunity (sep 2016) 52.222-36, Equal Opportunity For Workers With Disabilities (jun 2020) 52.222-41, Service Contract Labor Standards (aug 2018) (41 U.s.c. Chapter 67 52.222-42, Statement Of Equivalent Rates For Federal Hires (may 2014) (29 U.s.c. 206 And 41 U.s.c. Chapter 67 52.222-43, Fair Labor Standards Act And Service Contract Labor Standards Price Adjustment (multiple Year And Option Contracts) (aug 2018) (29 U.s.c. 206 And 41 U.s.c Chapter 67. 52.222-44, Fair Labor Standards Act And Service Contract Labor Standards Price Adjustment (may 2014) (29 U.s.c 206 And 41 U.s.c. Chapter 67 52.222-50, Combating Trafficking In Persons (nov 2021) 52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment - Requirements (may 2014) 52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services Requirements (may 2014) (41 U.s.c. Chapter 67 52.222-55, Minimum Wages Under Executive Order 13658 (dec 201 52.222-62 Paid Sick Leave Under Executive Order 13706 (jan 2017) (e.o. 1370 52.223-18, Encouraging Contractor Policies To Ban Text Messaging While Driving (jun 2020) 52.225-13, Restrictions On Certain Foreign Purchases (feb 2021) 52.232-33, Payment By Electronic Funds Transfer - System For Award Management (oct 2018) 52.242-5, Payments To Small Business Subcontractors (jan 2017) all Quotes Must Be Sent To The Nco2 Lorraine.hussain@va.gov. award Will Be Based Upon A Comparative Evaluation Of Quotes In Accordance With The Simplified Acquisition Procedures Of Far 13. Comparative Evaluation Is The Side By Side Pairwise Comparison Of Quotes Based On Factors Resulting In A Contracting Officer Decision For The Quote Most Favorable To The Government. Options Will Be Evaluated At Time Of Award. the Award Will Be Made To The Response Most Advantageous To The Government. responses Should Contain Your Best Terms, Conditions. to Facilitate The Award Process, All Quotes Must Include A Statement Regarding The Terms And Conditions Herein As Follows: "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document Without Modification, Deletion, Or Addition." or "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document With The Exception, Deletion, Or Addition Of The Following:" Quoters Shall List Exception(s) And Rationale For The Exception(s), If Any. submission Of Your Response Shall Be Received Not Later Than February 23th, 2024, At 3:00 Pm Est. Lorraine.hussain@va.gov. telephonic Communication Will Not Be Accepted, All And Any Matter Regarding This Combined Synopsis/solicitation Must Be Sent By Email To Lorraine.hussain@va.gov. late Submissions Shall Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). any Questions Or Concerns Regarding This Solicitation Should Be Forwarded In Writing Via E-mail To The Point Of Contact Listed Below. point Of Contact lorraine Hussain, Contracting Office- Lorraine.hussain@va.gov

Details: Disclaimer: This Is A Source Sought Notice Only. This Synopsis Is Not A Request For Quote, Proposal, Or Bid. This Notice Is Not A Solicitation As Defined By Far 2.101, Therefore It Shall Not Be Construed As A Commitment By The Government To Enter Into A Contract, Nor Does It Restrict The Government To An Acquisition Approach. All Information Contained In This Rfi Is Preliminary As Well As Subject To Modification And Is In No Way Binding On The Government. Information Submitted In Response To This Notice Is Voluntary; The Government Will Not Pay For Information Requested Nor Will It Compensate Any Respondent For Any Cost Incurred In Developing Information Provided To The Government. The Government Is Requesting That Restrictive Or Proprietary Markings Not Be Used In Response To This Notice. If A Solicitation Is Released, It Is Will Be Synopsized In The Federal Business Opportunities (fedbizopps) Website Or Gsa. It Is The Responsibility Of The Interested Parties To Monitor These Sites For Additional Information Pertaining To This Rfi. 1. Purpose: John L. Mcclellan Memorial Veterans Hospital Hereby Issues The Following Sources Sought Notice As A Request For Information (rfi). This Rfi Is Being Used For Market Research Purposes Only To Seek Contractors With The Capability To Provide The Central Arkansas Veterans Healthcare System (cavhs) With All Labor, Tools Materials, Supplies, Equipment, Cabling, Licensing, Personnel, Supervision And Transportation Required To Provide Mobile Positron Emission Tomography And Computed Tomography (pet-ct) Scans Trailer System Lease To Cavhs Facilities. See Attached Pws For Further Details. 2. Place Of Performance: John L. Mcclellan Memorial Veterans Hospital 4300 West 7th Street Little Rock, Ar 72205 3. Opportunity: The Cavhs Is Seeking Information From Potential Contractors On Their Ability To Provide This Service. This Is A Request For Information (rfi) Only. Small Business Concerns Are Encouraged To Provide Responses To This Rfi To Assist The Medvamc In Determining Potential Levels Of Competition Available In The Industry. 4. Contact Information: contracting Officer, Joseph Warren email Address: Joseph.warren@va.gov your Responses To This Notice Is Appreciated. performance Work Statement mobile Pet Ct Lease central Arkansas Veterans Healthcare System little Rock, Ar 3/6/2024 1. Purpose 1.1 The Purpose Of This Contract Is To Provide The Central Arkansas Veterans Healthcare System (cavhs) With Continuous Lease Of A Pet Ct System Set Up Inside Of A Shielded Parked Trailer Stationed Outside Of The John L. Mcclellan Vamc In Little Rock, Ar. 1.2 The Entire Offering Of A Pet/ct Mobile Trailer Shall Meet All Local, State, Federal, Industry, Nhpp, Nrc, Joint Commission Nec, Nfpa, Va, Osha, And Other Regulatory Standards. 2. Scope 2.1 The Contractor Shall Provide, Transport, Install, And Test All Listed Equipment. All Products Must Meet All Salient Characteristics Defined In This Section. 2.2 All Equipment And Installation Must Meet Manufacturers And Va Specifications. 2.3 The Contractor Shall Furnish All Supplies, Equipment, Facilities, Expertise, And Services Required For Delivery, Installation, Hookup, Maintenance, And Complete Removal Of The Supplies And Equipment. 2.4 The Contractor Is Responsible For Any Missing Parts And Components Not Included In Order To Carry Out The Installation. 2.5 The Contractor Shall Provide Set Up And Maintenance Of All Equipment To Ensure That It Is Able To Operate At 96% Or More Of Scheduled Uptime. 2.6 The Contractor Will Be Provided A Minimum Seventy-two (72) Hours Notice When The Mobile Unit Is No Longer Required. 2.7 Mobile Unit Shall Be Delivered And Removed, Respectively, On A Date And Time Mutually Agreed Upon Between The Cor And The Contractor. 2.8 Qualified Cavhs Personnel May Need To Perform Pet Scans At Any Time Therefore, The Mobile Unit Will Be Available, And The Va Will Have Access On Site 24 Hours A Day, 7 Days A Week (24/7) For The Agreed Upon Period. 2.9 The Contractor Shall Be Responsible To Maintain All Of The Equipment In Good Working Order At All Times And Shall Reimburse The Va For Any Reasonable Costs Which May Be Associated With Any Defective Workmanship Or Equipment Failure As Further Defined Herein. 2.10 Salient Characteristics 2.10.1 Pet/ct Scanner That Meets Or Exceeds The Following Characteristics: canon Mobile Cartesion Prime Digital Pet/ct Aero Or Equivalent, As Listed Below: extra-large 27 Cm (axial Fov) Digital Pet Detector With 1 To 1 Coupling fast 263 Psec Time Of Flight Or Better To Enable Fast Patient Scanning At Lower Doses With Optimal Image Quality allows For 1 Bed Acquisition Of Pet Brains With Scan Times As Fast As 5 Minutes allows For 1 Mm Recons As Small As 1 Mm variable Bed Timing To Facilitate 1 Bed, Longer Acquisition For Prostate Psma Without Extending The Overall Whole-body Scan Excessively 27 Cm Field Of View To Allow Users To Easily Capture Large Heart Scans large 4 Cm Ct Detector With 0.5 Mm Slices Providing Low Dose Attenuation Correction And Best Detail Available single Energy Metal Artifact Reduction Software Algorithm That Is Fda Cleared To Scan Any Metal In Any Part Of The Body, Whether Used Prospectively Or Retrospectively 100% Air-cooled Design That Does Not Require A Chiller remote And Automatic Movement Of The Table In Any Direction (up/down, In/out And Side To Side) table Can Be Moved From The Front Of Gantry, Back Of Gantry Or Remotely From The Control Room Console fda Cleared Deep Learning Reconstruction Available For Both Pet And Ct maintains Signal To Noise With A 75% Reduction In Counts Offering Faster Scans, Significantly Lower Dose (images Shown Sub 8 Mci), And With Higher Quantitative Accuracy large Bore Size With A 78 Cm Flared Gantry Opening includes 65" X 36" X 30" Console Desk & Two Multifunction Task Chars With Arms includes Dicom 3 Modality Worklist Management Service Class User System With Q/r & Store includes Image Quality Phantom include Power Distribution Unit applications Training To Include Advanced Cardiac Ct Course For Technologists wall Mount For Display injector Synchronization Kit cardiac Gating Scan Kit ecg Gated Scanning, Monitor, R-wave Trigger gantry Rear Control Panel flex Pedestal Dual Flow Injector vitrea Oncology Advanced Option neuro Package respiratory Gating Acquisition Software ability To Function Independently As A Whole-body Multi-slice Ct auto Kv Can Be Set For Protocols automatic Couch Height Positioning Compensation For Incorrect Patient Positioning active Collimation To Eliminate Exposure That Is Not Used For Diagnosis compliance With National Electronic Manufacturers Association (nema) Standards Xr25, Xr26, & Xr29. console With Ms Windows 10 Operating System And Ergonomic Operator Controls applications, Technical, And Service Support For Customers 24 Hours A Day, Seven Days A Week fire Suppression System ada Compliant Bathroom With Either Greywater Tanks In Underbelly Or With Connection To Local Sewer As Desired By Customer (see Para 2.11.2.6). appropriate Lead Shielding And Distance Configured Into The Design In Accordance With Independent 3rd Party Health Physicist Calculations amst Standard Hot Lab Cabinet With Installation Of Components And Lead Shielding Around Hot Lab Cabinet Room support And Maintenance, Including: a Quality Assurance Program Which Meets Or Exceeds Joint Commission Standards marketing Support operations Support parts And Service On Equipment That Complies With Oem Recommendations all Service And Maintenance As Required To Maintain It In Proper Working Order And Suitable For Use By Cavhs For Patient Care. schedule Maintenance And Ad Hoc Repair Of Equipment To Ensure That It Operates At 96% Or More Of Scheduled Uptime. twenty-four Hour Response Time To Resolve Critical Repair Issues; Defined As Those That Prohibit The System To Be Used For Patient Care. forty-eight Hour Response Time To Resolve Urgent Repair Issues; Defined As Those That Have A Significant Negative Impact On Workflow And/or Comfort. five-day Response Time To Resolve Minor Repair Issues; Defined As Those That Cause Only A Minor Inconvenience To Workflow And/or Comfort Or That Are Strictly Cosmetic In Nature. remote Diagnostic And Technical Support (requires Internet Connection) orientation For Medical Center Staff on-site Applications Training 2.10.5 System Networking Interfaces the Pet Ct Shall Be Able To Send Dicom Images To Both Vista Imaging And The Commercial Pacs (philips Vue Pacs) In Use At Cahvs. Images May Be Sent Directly To Vista & Pacs Or Through A Dicom Router. must Be Compatible With Dicom Modality Worklist C-find {mwl) To Query Exams. contractor's Equipment Must Be Compatible With The Va Existing Equipment And/or It Systems. the Pet Ct Must Be Compatible With The Va S Current And Future Patient Health Record Systems, Specifically Vista And Cerner. at The End Of The Contract Period, The Hard Drive Must Remain With The Va. Cost For A Replacement Hard Drive Should Be Included In The Offeror S Response. 2.11 Delivery And Installation 2.11.1 Delivery - Contractor Shall Ship/deliver All Equipment To The Central Arkansas Veterans Healthcare System, 4300 W. 7th St, Little Rock, Ar 72205. 2.11.2 Installation 2.11.2.1 All Equipment Shall Be Setup/installed Within 5 Business Days Of Delivery At Central Arkansas Veterans Healthcare System, 4300 West 7th Street, 5c-lr, Little Rock, Ar, 72205. 2.11.2.2 Install All Equipment To Manufacturer S Specifications Maintaining Federal, And Local Safety Standards. 2.11.2.3 All Work Shall Be Completed Between 8:00 A.m. And 4:30 P.m. Monday Friday. All Federal Holidays, Excluded. Federal Holidays Are Available At The Federal Holiday Opm Site. 2.11.2.4 If There Is An Operational Conflict With Installation, Night Or Weekend Installation May Be Required. Government Will Provide A 72 Hours' Notice Of Change Of Installation Hours. 2.11.2.5 The Contractor Shall Coordinate All Deliveries, Staging Areas, Installations, And Parking Arrangements With The Cor. 2.11.2.6 Contractor Shall Connect To The Local Sewer For Patient Waste Disposal Using Cavhs-provided Access To The Local Sewer System. 2.11.2.7 The Contractor Shall Remove All Related Shipping Debris And Cleanup Any Construction Associated With Delivery And Installation Of The Specified Items. Contractor Shall Remove All Packaging From The Cavhs Premises. The Contractor Shall Be Responsible For Any Damage To The Building That Occurs Due To Contractor Error Or Neglect. 2.12 Site Conditions 2.12.1 There Shall Be No Smoking On Cavhs Property At Any Time. 2.12.2 Food And Drink Will Only Be Allowed In Designated Areas (cafeteria, Etc.). 2.12.3 Contractor Shall Abide By All Cavhs Rules And Regulation In Regard To Covid-19, Including But Not Limited To Screening Procedures And Use Of Proper Ppe. 2.13 Period Of Performance 2.13.1 The Period Of Performance Shall Be 12-months From A Mutually Agreed Upon Start Date Between Vha And The Contractor, With An Option To Renew For Two Additional 12-months Periods After The Start Date. The Start Date Will Be As Near The Contract Award Date As Possible, However See Paragraph 2.13.2 For Further Guidance. The Contract Is Subject To The Availability Of Va Funds. No Service Shall Be Performed By The Contractor After Dates Indicated, Unless Authorized By The Contracting Officer In Writing. 2.13.2 The Pet Ct Trailer Shall Be Set Up On An Existing Concrete Pad Outside The John L. Mcclellan (jlm) Vamc In Little Rock, Ar. T 2.14 Equipment Maintenace & Repairs 2.14.1 Equipment Provided Shall Be In Good Working Order At All Times In Order To Provide High Quality Scans Required Under This Solicitation And Any Resulting Contract. Contractor Shall Be Completely Responsible For The Preventive Maintenance, Emergency And General Repairs, Replacement Of Any Defective Parts/components, Safety, Cleaning, And Upkeep Of All Equipment Furnished By The Contractor. Preventative Maintenance/repairs On The Pet Ct Mobile Unit And All Associated Equipment Shall Be Performed In Accordance With The Conformance Standards And Manufacturer's Recommendations. 2.14.2 If The Equipment Should Fail During Normal Working Hours, Emergency Repairs Will Be Performed On-site By Qualified Service Engineers Within A Four-hour Response Time In Order To Reduce Equipment Downtime. Contract Price Shall Be Reduced By A Reasonable Amount In The Event That The Contractor Is Unable To Meet The Response Times Stated Herein Or As Mutually Agreed Upon With The Cor Based Upon Patient Scheduling. Notwithstanding, If It Is Determined That The Equipment Cannot Be Repaired On Site Within An Agreed Upon Period Of Time, The Contractor Agrees To Replace The Mobile Unit Within Forty-eight (48) Hours Of Equipment Failure. Contract Price Will Be Adjusted For Any Days In Which The Equipment Cannot Be Used. 2.14.3 Va Shall Be Responsible For The Overall Housekeeping Of The Unit Including But Not Limited To Removal And Proper Disposal Of All Debris On A Daily Basis Or As Often As Necessary To Maintain A Sanitized And Neat Environment In Accordance With The Conformance Standards. 2..14.4 The Contractor Shall Furnish And Replace Parts To Meet Times Specified In This Agreement. The Contractor Has Ready Access To All Parts, Including Unique And/or High Mortality Replacement Parts. All Parts Supplied Shall Be Compatible With Existing Equipment. The Contract Shall Include All Parts Required. The Contractor Shall Use New Or Rebuilt Parts. All Parts Shall Be Of Current Manufacture And Have Complete Versatility With The Presently Installed Equipment. All Parts Shall Perform Identically To The Original Equipment Specifications. Rebuilt Parts, Used Parts Or Those Removed From Another Piece Of Equipment Shall Not Be Installed Without Specific Approval By The Co Or The Cor. 3. Inspection And Acceptance: 3.1 The Contractor Shall Conduct A Joint Inspection With The Cor Upon Delivery Of Equipment. 3.2 Contractor Shall Provide Dates Of Completion Of Punch List Items And Replacement Parts And/or Short Ship Items From The Manufacturer(s). 3.3 The Cor Shall Ensure All Work Is Completed Satisfactorily Prior To Acceptance. Disputes Shall Be Resolved By The Contracting Officer. 4. Delivery/storage Requirements 4.1 Deliver Materials To Cavhs In Manufacturer's Original Sealed Containers With Brand Name Marked Thereon. 4.2 Package To Prevent Damage Or Deterioration During Shipment, Handling, Storage And Installation. Maintain Protective Covering In Place And In Good Repair Until Removal Is Necessary. 4.3 Deliver Specified Items Only When The Site Is Ready For Installation Work To Proceed. 4.4 Store Products In Dry Condition Inside Enclosed Facilities. 4.6 Any Government Requested Delayed Delivery Up To 90 Days After Initial Delivery Date, Shall Be At No Additional Cost To The Government. 4.7 A Pre-delivery Meeting Will Be Conducted 15 Business Days Prior To Initial Negotiated Delivery Date For Verification Of Delivery And Installation Dates. 4.8 Delivery And Installation Will Be Coordinated Through The Cor. 5. Deliverables 5.1 Operation And Maintenance Manuals 5.1.1 Binders - Quantity (1) For Each Equipment Item. 5.1.2 Digital Copies- Quantity (1) For Each Equipment Item. 5.2 Deliver Compilation Of All Manufacturer Recommended Maintenance Schedule And Operation Materials Packaged In Binder(s) To Cor Upon Completion Of Installation. 6. Operator Training: Contractor Shall Provide On-site Training Of The Equipment To The Users. Scheduling Of Operator Training Shall Be Coordinated With The Cavhs Cor After Installation Is Complete. 7. Protection Of Property 7.1 Contractor Shall Protect All Items From Damage. The Contractor Shall Take Precaution Against Damage To The Building(s), Grounds And Furnishings. The Contractor Shall Repair Or Replace Any Items Related To Building(s) Or Grounds Damaged Accidentally Or On Purpose Due To Actions By The Contractor. 7.2 The Contractor Shall Perform An Inspection Of The Building(s) And Grounds With The Cor Prior To Commencing Work. To Ensure That The Contractor Shall Be Able To Repair Or Replace Any Items, Components, Building(s) Or Grounds Damaged Due To Negligence And/or Actions Taken By The Contractor. The Source Of All Repairs Beyond Simple Surface Cleaning Is The Facility Construction Contractor (or Appropriate Subcontractor), So That Building Warranty Is Maintained. Concurrence From The Va Facilities Management Poc And Cor Is Required Before The Contractor May Perform Any Significant Repair Work. In All Cases, Repairs Shall Utilize Materials Of The Same Quality, Size, Texture, Grade, And Color To Match Adjacent Existing Work. 7.3 The Contractor Shall Be Responsible For Security Of The Areas In Which The Work Is Being Performed Prior To Completion. 7.4 Contractor Shall Provide Floor Protection While Working In All Va Facilities. All Material Handling Equipment Shall Have Rubber Wheels. 8. Security Requirements 8.1. Security Clause: "a&a Requirements Do Not Apply--security Accreditation Package Is Not Required". Data Will Be Under The Control Of Va At All Times. Vendor Remote Support Solution Only Has Access To Machine Data And Error Logs. Ephi Is Not Transferred Nor Accessible From The Remote Monitoring Interface. access To Va Information And Va Information Systems a. The Contractor Will Not Have Access To Va Desktop Computers, Nor Will They Have Access To Online Resources Belonging To The Government While Conducting Services. If Removal Of Equipment From The Va Is Required, Any Memory Storage Devices, Such As Hard Drives, Solid State Drives And Non-volatile Memory Units Will Remain In Va Control And Will Not Be Removed From Va Custody.â â  b. The Contractor Will Not Have Access To Protected Patient Health Information (phi) And Nor Will They Have The Capability Of Accessing Patient Information During The Services Provided To The Va And If Removal Of Equipment From The Va Is Required, Any Memory Storage Devices, Such As Hard Drives, Solid State Drives And Non-volatile Memory Units Will Remain In Va Control And Will Not Be Removed From Va Custody.â â  All Research Data Available For Contractor Analyses Is De-identified. c. Contractor Shall Comply With All Applicable Records Management Laws And Regulations, As Well As National Archives And Records Administration (nara) Records Policies, Including But Not Limited To The Federal Records Act (44 U.s.c. Chs. 21, 29, 31, 33), Nara Regulations At 36 Cfr Chapter Xii Subchapter B, And Those Policies Associated With The Safeguarding Of Records Covered By The Privacy Act Of 1974 (5 U.s.c. 552a). These Policies Include The Preservation Of All Records, Regardless Of Form Or Characteristics, Mode Of Transmission, Or State Of Completion.â  d. In Accordance With 36 Cfr 1222.32, All Data Created For Government Use And Delivered To, Or Falling Under The Legal Control Of, The Government Are Federal Records Subject To The Provisions Of 44 U.s.c. Chapters 21, 29, 31, And 33, The Freedom Of Information Act (foia) (5 U.s.c. 552), As Amended, And The Privacy Act Of 1974 (5 U.s.c. 552a), As Amended And Must Be Managed And Scheduled For Disposition Only As Permitted By Statute Or Regulation.â  e. In Accordance With 36 Cfr 1222.32, Contractor Shall Maintain All Records Created For Government Use Or Created In The Course Of Performing The Contract And/or Delivered To, Or Under The Legal Control Of The Government And Must Be Managed In Accordance With Federal Law. Electronic Records And Associated Metadata Must Be Accompanied By Sufficient Technical Documentation To Permit Understanding And Use Of The Records And Data.â  f. Central Arkansas Veterans Healthcare System And Its Contractors Are Responsible For Preventing The Alienation Or Unauthorized Destruction Of Records, Including All Forms Of Mutilation. Records May Not Be Removed From The Legal Custody Of Central Arkansas Veterans Healthcare System Or Destroyed Except For In Accordance With The Provisions Of The Agency Records Schedules And With The Written Concurrence Of The Head Of The Contracting Activity. Willful And Unlawful Destruction, Damage Or Alienation Of Federal Records Is Subject To The Fines And Penalties Imposed By 18 U.s.c. 2701. In The Event Of Any Unlawful Or Accidental Removal, Defacing, Alteration, Or Destruction Of Records, Contractor Must Report To Central Arkansas Veterans Healthcare System. The Agency Must Report Promptly To Nara In Accordance With 36 Cfr 1230. g. The Contractor Shall Immediately Notify The Appropriate Contracting Officer Upon Discovery Of Any Inadvertent Or Unauthorized Disclosures Of Information, Data, Documentary Materials, Records Or Equipment. Disclosure Of Non-public Information Is Limited To Authorized Personnel With A Need-to-know As Described In The [contract Vehicle]. The Contractor Shall Ensure That The Appropriate Personnel, Administrative, Technical, And Physical Safeguards Are Established To Ensure The Security And Confidentiality Of This Information, Data, Documentary Material, Records And/or Equipment Is Properly Protected. The Contractor Shall Not Remove Material From Government Facilities Or Systems, Or Facilities Or Systems Operated Or Maintained On The Government's Behalf, Without The Express Written Permission Of The Head Of The Contracting Activity. When Information, Data, Documentary Material, Records And/or Equipment Is No Longer Required, It Shall Be Returned To Central Arkansas Veterans Healthcare System Control Or The Contractor Must Hold It Until Otherwise Directed. Items Returned To The Government Shall Be Hand-carried, Mailed, Emailed, Or Securely Electronically Transmitted To The Contracting Officer Or Address Prescribed In The [contract Vehicle]. Destruction Of Records Is Expressly Prohibited Unless In Accordance With Paragraph (4). h.the Contractor Is Required To Obtain The Contracting Officer's Approval Prior To Engaging In Any Contractual Relationship (sub-contractor) In Support Of This Contract Requiring The Disclosure Of Information, Documentary Material And/or Records Generated Under, Or Relating To, Contracts. The Contractor (and Any Sub-contractor) Is Required To Abide By Government And Central Arkansas Veterans Healthcare System Guidance For Protecting Sensitive, Proprietary Information, Classified, And Controlled Unclassified Information. i. The Contractor Shall Only Use Government It Equipment For Purposes Specifically Tied To Or Authorized By The Contract And In Accordance With Central Arkansas Veterans Healthcare System Policy.â  j. The Contractor Shall Not Create Or Maintain Any Records Containing Any Non-public Central Arkansas Veterans Healthcare System Information That Are Not Specifically Tied To Or Authorized By The Contract.â  kite Contractor Shall Not Retain, Use, Sell, Or Disseminate Copies Of Any Deliverable That Contains Information Covered By The Privacy Act Of 1974 Or That Which Is Generally Protected From Public Disclosure By An Exemption To The Freedom Of Information Act.â  l. The Central Arkansas Veterans Healthcare System Owns The Rights To All Data And Records Produced As Part Of This Contract. All Deliverables Under The Contract Are The Property Of The U.s. Government For Which Central Arkansas Veterans Healthcare System Shall Have Unlimited Rights To Use, Dispose Of, Or Disclose Such Data Contained Therein As It Determines To Be In The Public Interest. Any Contractor Rights In The Data Or Deliverables Must Be Identified As Required By Far 52.227-11 Through Far 52.227-20. m. Training.  all Contractor Employees Assigned To This Contract Who Create, Work With Or Otherwise Handle Records Are Required To Take [agency]-provided Records Management Training. The Contractor Is Responsible For Confirming Training Has Been Completed According To Agency Policies, Including Initial Training And Any Annual Or Refresher Training.â  8.3. Va Information Custodial Language a. Bio-medical Devices And Other Equipment Or Systems Containing Media (hard Drives, Optical Disks, Etc.) With Va Sensitive Information Must Not Be Returned To The Vendor At The End Of Lease, For Trade-in, Or Other Purposes. the Options Are: (1) Vendor Must Accept The System Without The Drive; (2) Va S Initial Medical Device Purchase Includes A Spare Drive Which Must Be Installed In Place Of The Original Drive At Time Of Turn-in; Or (3) Va Must Reimburse The Company For Media At A Reasonable Open Market Replacement Cost At Time Of Purchase Occur That May (4) Due To The Highly Specialized And Sometimes Proprietary Hardware And Software Associated With Medical Equipment/systems, If It Is Not Possible For The Va To Retain The Hard Drive, Then; (a) The Equipment Vendor Must Have An Existing Baa If The Device Being Traded In Has Sensitive Information Stored On It And Hard Drive(s) From The System Are Being Returned Physically Intact; (b) Any Fixed Hard Drive On The Device Must Be Non-destructively Sanitized To The Greatest Extent Possible Without Negatively Impacting System Operation. Selective Clearing Down To Patient Data Folder Level Is Recommended Using Va Approved And Validated Overwriting Technologies/methods/tools. Applicable Media Sanitization Specifications Need To Be Preapproved And Described In The Purchase Order Or Contract. (c) A Statement Needs To Be Signed By The Director (system Owner) That States That The Drive Could Not Be Removed And That (a) And (b) Controls Above Are In Place And Completed. The Iso Needs To Maintain The Documentation. 8.4 Security Incident Investigation a. The Term Security Incident Means An Event That Has, Or Could Have, Resulted In Unauthorized Access To, Loss Or Damage To Va Assets, Or Sensitive Information, Or An Action That Breaches Va Security Procedures. The Contractor/subcontractor Shall Immediately Notify The Cor And Simultaneously, The Designated Iso And Privacy Officer For The Contract Of Any Known Or Suspected Security/privacy Incidents, Or Any Unauthorized Disclosure Of Sensitive Information, Including That Contained In System(s) To Which The Contractor/subcontractor Has Access. b. To The Extent Known By The Contractor/subcontractor, The Contractor/subcontractor S Notice To Va Shall Identify The Information Involved, The Circumstances Surrounding The Incident Including To Whom, How, When, And Where The Va Information Or Assets Were Placed At Risk Or Compromised), And Any Other Information That The Contractor/subcontractor Considers Relevant. c. With Respect To Unsecured Protected Health Information, The Business Associate Is Deemed To Have Discovered A Data Breach When The Business Associate Knew Or Should Have Known Of A Breach Of Such Information. Upon Discovery, The Business Associate Must Notify The Covered Entity Of The Breach. Notifications Need To Be Made In Accordance With The Executed Business Associate Agreement. d. In Instances Of Theft Or Break-in Or Other Criminal Activity, The Contractor/subcontractor Must Concurrently Report The Incident To The Appropriate Law Enforcement Entity (or Entities) Of Jurisdiction, Including The Va Oig And Security And Law Enforcement. The Contractor, Its Employees, And Its Subcontractors And Their Employees Shall Cooperate With Va And Any Law Enforcement Authority Responsible For The Investigation And Prosecution Of Any Possible Criminal Law Violation(s) Associated With Any Incident. The Contractor/subcontractor Shall Cooperate With Va In Any Civil Litigation To Recover. 8.5 Liquidated Damages For Data Breach a. Consistent With The Requirements Of 38 U.s.c. §5725, A Contract May Require Access To Sensitive Personal Information. If So, The Contractor Is Liable To Va For Liquidated Damages In The Event Of A Data Breach Or Privacy Incident Involving Any Spi The Contractor/subcontractor Processes Or Maintains Under This Contract. b. The Contractor/subcontractor Shall Provide Notice To Va Of A Security Incident As Set Forth In The Security Incident Investigation Section Above. Upon Such Notification, Va Must Secure From A Non-department Entity Or The Va Office Of Inspector General An Independent Risk Analysis Of The Data Breach To Determine The Level Of Risk Associated With The Data Breach For The Potential Misuse Of Any Sensitive Personal Information Involved In The Data Breach. The Term 'data Breach' Means The Loss, Theft, Or Other Unauthorized Access, Or Any Access Other Than That Incidental To The Scope Of Employment, To Data Containing Sensitive Personal Information, In Electronic Or Printed Form, That Results In The Potential Compromise Of The Confidentiality Or Integrity Of The Data. Contractor Shall Fully Cooperate With The Entity Performing The Risk Analysis. Failure To Cooperate May Be Deemed A Material Breach And Grounds For Contract Termination. c. Each Risk Analysis Shall Address All Relevant Information Concerning The Data Breach, Including The Following: (1) Nature Of The Event (loss, Theft, Unauthorized Access); (2) Description Of The Event, Including: (a) Date Of Occurrence; (b) Data Elements Involved, Including Any Pii, Such As Full Name, Social Security Number, Date Of Birth, Home Address, Account Number, Disability Code; (3) Number Of Individuals Affected Or Potentially Affected; (4) Names Of Individuals Or Groups Affected Or Potentially Affected; (5) Ease Of Logical Data Access To The Lost, Stolen Or Improperly Accessed Data In Light Of The Degree Of Protection For The Data, E.g., Unencrypted, Plain Text; (6) Amount Of Time The Data Has Been Out Of Va Control; (7) The Likelihood That The Sensitive Personal Information Will Or Has Been Compromised (made Accessible To And Usable By Unauthorized Persons); Va Information, Obtain Monetary Or Other (8) Known Misuses Of Data Containing Sensitive Personal Information, If Any; (9) Assessment Of The Potential Harm To The Affected Individuals; (10) Data Breach Analysis As Outlined In 6500.2 Handbook, Management Of Security And privacy Incidents, As Appropriate; And (11) Whether Credit Protection Services May Assist Record Subjects In Avoiding Or Mitigating The Results Of Identity Theft Based On The Sensitive Personal Information That May Have Been Compromised. d. Based On The Determinations Of The Independent Risk Analysis, The Contractor Shall Be Responsible For Paying To The Va Liquidated Damages In The Amount Of $37.50 Per Affected Individual To Cover The Cost Of Providing Credit Protection Services To Affected Individuals consisting Of The Following: (1) Notification; (2) One Year Of Credit Monitoring Services Consisting Of Automatic Daily Monitoring Of At Least 3 Relevant Credit Bureau Reports; (3) Data Breach Analysis; (4) Fraud Resolution Services, Including Writing Dispute Letters, Initiating Fraud Alerts And Credit Freezes, To Assist Affected Individuals To Bring Matters To Resolution; (5) One Year Of Identity Theft Insurance With $20,000.00 Coverage At $0 Deductible; And (6) Necessary Legal Expenses The Subjects May Incur To Repair Falsified Or Damaged Credit Records, Histories, Or Financial Affairs. 8.6 Confidentiality And Nondisclosure It Is Agreed That: a. The Preliminary And Final Deliverables And All Associated Working Papers, Application Source Code, And Other Material Deemed Relevant By The Va Which Have Been Generated By The Contractor In The Performance Of This Task Order Are The Exclusive Property Of The U.s. Government And Shall Be Submitted To The Co At The Conclusion Of The Task Order. b. The Co Will Be The Sole Authorized Official To Release Verbally Or In Writing, Any Data, The Draft Deliverables, The Final Deliverables, Or Any Other Written Or Printed Materials Pertaining To This Task Order. No Information Shall Be Released By The Contractor. Any Request For Information Relating To This Task Order Presented To The Contractor Shall Be Submitted To The Co For Response. c. Press Releases, Marketing Material Or Any Other Printed Or Electronic Documentation Related To This Project, Shall Not Be Publicized Without The Written Approval Of The Co. 8.7 Reference (s): 1. Va Affairs Handbook 6500, Risk Management Framework For Va Information Systems Tier 3: Va Information Security Program, 10 Mar 2015. 2. Veterans Health Administration Procurement Manual (vha Pm) 11/3/2014. 3. Va Handbook 1901.01, Health Information Management And Health Records 19 Mar 15. 4. Vha Handbook 1605.5, Business Associate Agreements 22 July 2014 5. Memo: Va Maintenance/installation (warranty) Contracts (vaiq 7058822), 24 Mar 2011. 6. Va Directive 0735, Homeland Security Presidential Directive 12 (hspd-12) Program, Dated February 17, 2011. 7. Veterans Affairs Handbook 6500.6 Contract Security, 12 Mar 2010. 8. Health Insurance Portability & Accountability Act (hipaa) Privacy Rule (see 45 Crf 164, 502(a)(1). 9. Va Directive 0710, Personnel Security And Suitability Program, Dated June 4, 2010. 10. Va Directive 6066, Protected Health Information. 11. Privacy Act Of 1974 (5 U.s.c. 552a). 12. Homeland Security Presidential Directive (hspd-12), 13. Federal Information Processing Standards Publication (fips) 201, Personal Identity Verification (piv) Of Federal Employees And Contractors, Dated Feb 25, 2005, Amended By Fips 201-1, March 2006. 14. Social Security Act (42 U.s.c. § 1395x(u)): Health Care And Other Related Services, As Mentioned In Hipaa Regulations, Are Defined In Detail Under Section 1861(s) Http://www.ssa.gov/op_home/ssact/title18/1861.htm. 15. Va Directive 6512, Secure Wireless Technology, Dated 4 Nov 2009

Details: Va256-13-r-0873 page 18 Of 46 sources Sought Notice Only: description: This Is A Sources Sought To Determine The Availability Of Potential Sources Having The Skills And Capabilities Necessary To Provide The Specified Requirement. All Interested Vendors Are Invited To Provide Information To Contribute To This Market Survey/sources Sought Including Commercial Market Information. this Is Not A Solicitation Announcement. This Is A Sources Sought Synopsis Only. Questions Shall Be Submitted By Email To Jennifer.adams7@va.gov. Provide Only The Requested Information Below. The Purpose Of This Sources Sought Is To Gain Knowledge Of Potential Qualified Sources And Their Size Classifications (service Disabled/veteran Owned Small Business (sdvosb/vosb), Hub Zone, 8(a), Small, Small Disadvantaged, Woman Owned Small Business, fss/gsa Contract Schedule Holders Or Large Business) Relative To Naics Code: 562112 Hazardous Waste Collection. Product/service Code: S205 Housekeeping Trash/garage Collection. The Size Standard Is $47m. responses To This Sources Sought Will Be Used By The Government To Make Appropriate Acquisition Decisions. After Review Of The Responses To This Sources Sought Synopsis, A Solicitation Announcement May Be Published On The Gsa Or Fbo Website. Responses To This Sources Sought Synopsis Are Not Considered Adequate Responses To The Solicitation Announcement. All Interested Offerors Must Respond To The Solicitation Announcement In Addition To Responding To This Sources Sought Announcement. Please Read The Statement Of Work Carefully Before Responding To This Rfi. period Of Performance April 1, 2024 Through September 30, 2024, With 3 Plus Option Years. specified Requirement: Network Contracting Office 16 (nco16) Is Seeking Sources For A Potential Contractor To Perform The Following Type Of Service For Medical Waste Removal At Several Sites Located In The Performance Work Statement (pws). Performance Work Statement General Services: contractor Shall Provide Regulated Medical Waste Services (rmw) To Include Reusable Sharps Containers Program Services To Include The Pickup Of Sharps Bio-hazardous Waste And Rmw, Storage, Transport. Destruction. Treatment. And Disposition Of Contents For The Gulf Coast Veterans Health Care System (herein Referred To As Va) At The Following Four Sites With One Site Having Two Locations: biloxi. Ms: 400 Veterans Ave, Biloxi, Ms 39531 pensacola, Fl: 790 Veterans Way. Pensacola. Fl 32507 eglin Air Force Base, Fl: 100 Veterans Way. mobile Outpatient Clinic, 4444 Demetropolis, Road, Mobile Al 36619 panama City Beach, Fl, 2600 Veterans Way, Panama City Beach, Fl 32408-7186 Specific Services: Provide Sharps Containment System: Contractor Shall Provide Services Including A Reusable Sharps Containment System Compliant With Centers For Disease Control (cdc) And National Institute For Occupational Safety And Health (niosh) Guidelines And Which Has Been Approved By The Va (nursing. Safety. Infection Control, And Gems Coordinator). Contractor Shall Provide Rigid Puncture Resistant Sharps Containers That Meet The American Society For Testing Materials (astm) Standard F213 -01 "standard Specification For Puncture Resistance Of Materials Used In Containers For Discarded Medical Needles And Other Sharps". Contractor Shall Provide Sharps Containers That Include Appropriate Sizes And Shapes, Opening Types (vertical Drop) And Closures (locking Mechanism) Mounting Brackets, Cans With Casters (to Hold And Transport), Training And Replacement For Sharps Collection And Containment Of Sharps Waste (defined Below). Sharps Containers Shall Be Of The Type That Lends Itself To Privacy Of Patient Information (example Be Of Solid Red In Color). Each Container Shall Meet All Requirements Of The Occupational Safety And Health Administration (osha) Regulation 29 Cfr 1910, 1030 'bloodborne Pathogens" And Be Registered As A Sharps Waste Container With The Food And Drug Administration (fda). Contractor Shall Provide Labor, Tools, Materials, Supplies, Appropriate Equipment, Transportation, And Supervision Necessary To Pick Up, Store, Transport, Decant, And Clean/sterilize Containers As Well As Destroy, Dispose Of, Document, And Invoice For Waste Removed From The Containers. Special Function Items Such As, But Not Limited To, Funnel Tops, Traps Wall Cabinets And Related Hardware, Shall Be Supplied By The Contractor At No Additional Cost To The Va. The Contractor Shall Provide Reusable Sharps Containment System Services For A Flat-rate Monthly Fee For Each Of The Sites/locations Identified. Services Shall Be Coordinated Between The Contractor And The Contracting Officer Representative (cor). "sharps Infectious Waste" Shall Be Considered For The Purpose Of This Contract To Include Hypodermic Needles, Syringes, And Scalpel Blades. The Term Does Not Include Any Hazardous Waste, Radioactive Waste, Pharmaceuticals. The Medical Center Will Be Responsible For The Segregating Of All Waste In Accordance With Federal, State, End Local Requirements. contractor Is Encouraged To Attend Site Visit/survey At The Biloxi Campus (due To The Largest Quantity/locations) To Verify The Quantity, Size, Locations Exchange Frequency For Reusable Sharps Containers. Existing Sharps Container S Locations (patient Rooms, Exam Rooms, Research Areas Lab Areas, Operating Rooms, Procedure Rooms, And Other Areas) And Sizes Will Be Used As A Guideline. The Size/count Of Containers Requiring Installation For Each Of The Sites/locations Will Be Provided Under Attachment A (building, Room Number, Size And Type Of Sharps Container) Which Is Currently Only In Draft Form. The Current Estimated Number Of Wall Mounted Units Is Subject To Site Visit/survey. attachment H Will Be Finalized And Provided By Amendment In Sufficient Time Prior To Proposal Due Date. Contractors Are Requested To Provide A Price For The Different Sizes And Types Whereby If Additional Ones Are Added In The Future The Firm Fixed Price Will Be Already Established. For The Reusable Sharp S Container Management Program, The Contractor Shall Supply And Install Al} Necessary Locking Mounting Wall Brackets. Floor Dollies And Countertop Stability Base Where Needed. Reusable Sharps Containers Shall Be Exchanged By An Employee Of The Primary Contracting Company At A Set Frequency To Ensure Sharps Containers Do Not Overfill. Containers Will Not Be Allowed To Be Filled Above The Manufacturer S Recommended Level. This Is A Safety Requirement And Will Be Strictly Enforced By The Va. The Unit Exchange Frequency May Vary From Area To Area. The Exchange Frequency Will Be Based On Patient Care Volume In Each Location. The Estimated Frequency Is At Least Weekly. The Needs Of Specialty Areas As Well As Restricted Areas Will Also Be Verified During The Site Visit/survey. The Contractor Shall Provide A Supply Of Clean/sterilized Reusable Sharps Containers To Be Kept On Site To Be Used In The Event That A Container Does Become Full Prior To The Contactor S Scheduled Exchange Visit And An Environmental Management Service (ems) Staff Member Will Then Replace Full Container With A New Empty One. Exact Storage Location To Be Determined By Ems. Contents Of Reusable Sharps Contents Shall Be Transported Off Station And Disposed Of As Rmw. This Waste Shall Be Billed Separately From Regulated Waste Collection. The Contaminated Reusable Sharps Containers Shall Be Cleaned, Disinfected. And Sterilized For Reuse. Reusable Sharps Containers Shall Not Be Cycled Through More Than 500 Times Or As Stated And Allowed By Applicable And Current Regulations. The Cost Of Any Replacement Sharps Containers Shall Be At The Contractor's Expense. phase In: The Contractor Shall Work With The Cor Or Designee To Pick-up And Remove Existing Sharps Containers, Waste, And Brackets. All Removed Brackets And Accessories Shall Be Provided To The Va Upon Removal. Contractor Shall Replace All Existing Sharp Container Brackets With Reusable Sharps Container Brackets And Containers To Include Wheeled Medication Carts. Contractor Shall Provide Containers That Comply With The Requirements Stated Above And With Federal, State, And Local Regulations Regarding Labeling. All Containers Shall Be Clearly Labeled With Biohazard Symbol And The Word "biohazard' Displayed On Them Along With Bar Code. The Removal Of Old Sharps Containers And Installation Of New Containers Shall Be Performed After Normal Duty Hours And/or On Weekends. Weekend Work May Be Performed Between The Hours Of 7 A.m. And 3:30 P.m. These Days And Times Are Necessary To Cause The Least Disruption To Patient Care. The Contractor Shall Be Responsible For The Repair Of Any Damage Caused During The Removal Of The Old Sharp Containers And/or Brackets Or Installation Of The New Sharp Containers And/or Brackets. This May Require Filling Holes (patching) And Painting By The Contractor. Paint Colors And Numbers Of The Paint To Be Used Will Be Provided By The Va To The Contractor So The Existing Colors Will Match The Existing Dã©cor. Installed Containers Shall Be At A Height To Meet American Act (ada) Requirements. It Is Anticipated That This Phase- In Shall Be Accomplished Within One Month. provide Regulated Medical Waste (rmw) Collection And Disposal Services: contractor Shall Provide Services Including The Provision Of Containers And Labels For Regulated Medical Waste, Chemotherapy Waste, And Pathological Waste, Pickup Of All Regulated Medical Waste Streams (sharps, Rmw, Residual Chemotherapy Waste Per Resource Conservation And Recovery Act (rcra), And Pathological Waste); Storage And Transport; Decanting, Examination, Appropriate Treatment. Incineration, Disposal, And Documentation Of Quantities And Weights Of Waste; Cleaning Of Containers; And Provision Of Legal Manifest Which Accurately Documents The Chain Of Custody From Point Of Pickup To Final Disposition. The Contractor Shall Provide These Services For Each Of The Site Locations Identified. the Contractor Shall Be Responsible For The Removal Of All Chemotherapy Waste Placed In The Medical Waste Storage Areas. The Ridge Yellow Containers Will Be Labeled So The Contractor Will Know The Final Disposal Is Incineration. The Yellow Containers Will Be Non-reusable And Supplied By The Va. The Invoices Must Note How Many Yellow Containers Are Removed At Each Site. the Contractor Shall Be Responsible For The Removal Of All Pathology Waste That The Va Staff Has Collected And Stored In Designated Refrigerated Unit To Await Final Pickup, Disposal, And Incineration. Prior To Contractor Transport. Ems Staff Will Ensure That The Appropriate Containers Are Closed And Labeled As To The Origin Of The Container For Tracking Purposes And Labeled "contaminated Specimens To Be Incinerated" Or "incinerate Only" safety Requirements And Training: Contractor Vehicles, Carts, Materials, Or Supplies Shall Not Be Left Unattended. Vehicles Shall Be Parked Only In Designated Area As Provided By Ems Staff. Contractor Shall Ensure That Its Staff Who Drive On Va Property Are Professional, Comply With All Facility Policies Such As Zero Tolerance For Sexual Harassment And Violence In The Workplace, Drug-free Workplace, And Safety. Contractor Shall Ensure That Facility Standards Are Followed Along With The Joint Commission Standards. Contractor Is Solely Responsible For All Spills Or Leaks During The Performance Of The Contract. The Contractor Agrees To Clean Up Such Spills And/or Leaks To The Satisfaction Of The Government In A Manner Which Satisfies The Applicable Regulations, At No Cost To The Government. The Contractor Shall Report To The Va Safety Officer Via The Cor All Spills, Regardless Of Quantity And All Personnel Exposures. Such Reports Shall First Be Reported By Telephone Within 30 Minutes Following The Incident And Shall Have A Follow Up In Writing No Later Than Seven (7) Days After The Initial Report. When Reporting A Spill, The Following Information Shall Be Famished (l) Quantity Spilled; (2) Exact Location Of Spill; (3) Containment Procedures Initiated: (4) Clean-up And Disposal Procedures; (5) Personal Injury Involved; (6) Assistance Required; And (7) A Narrative Summarizing All On-scene Visits Made By Local, State, And Federal Officials. Contractor Shall Not Dispose Of Any Chemical Containers Contaminated By Cleaning Chemicals In Any Location In The Facility Except As Specified By The Cor. Contractor Shall Comply With All Applicable Federal, State, County Regulations On Workers' Safety Standards And Related Training. All Contractor Personnel Involved In The Performance Of This Contract Shall Have Received Training Regarding The Handling Of Infectious Materials, And Emergency Procedures To Be Followed In Case Of A Spill Before Starting Work Under This Contract. Certification Of Such Training Shall Be Provided Within Fifteen Days Of Receiving Notice Of Award Of The Contract. Certification For Any New Contract Employees Shall Be Provided To The Contracting Officer Within Thirty (30) Days Of Receipt Or The Training. contractor Shall Provide Yearly In-service Training (at No Additional Cost To Va) To Va Employees, Upon Request Of The Va, To Establish Safe, Efficient, And Cost-effective Identification, Separation, Segregation, Packaging, Labeling, And Handling Of Medical Waste. Training Shall Include Methods On How To Identify And Handle Infectious Waste With Special Emphasis On Right To Know Compliance. Training Shall Also Include Applicable Requirements Of The Department Of Transportation (dot) As A Waste Generator. Va Will Provide A Conference Room For Training. Quality Control/assurance (contractor): The Contractor Shall Establish And Maintain A Complete Quality Control/assurance Program To Assure The Requirements Of The Contract Are Provided As Specified. The Contractor Shall Provide A Copy Or Their Quality Control/assurance Plan To The Contracting Officer With Their Proposal At Time Of Offer Due Date. Quality/performance Requirements Summary: As Stated Above The Contractor Shall Be Responsible For Their Own Internal Quality Control Program. The Government Will Perform Surveillance Of The Contractor's Performance Using The Performance Work Statement And The Performance Requirements Summary (see Technical Exhibit I) On The Next Page To Determine If The Contractor Exceeds, Meets, Or Does Not Meet These Standards. The Fact That The Government Is Performing Surveillance Of The Contractor's Performance Does Not In Any Way Relieve The Contractor From Performing Their Own Surveillance And Maintaining Acceptable Quality Levels. Nor Will Va Staff Directly Supervise Or Control The Employees Or The Contractor. even Though It Is Used As An "incentive" The Right To Exercise An Option Period Is Still At The Government's Discretion. performance Requirements Summary Matrix: the Government Shall Use These Standards To Determine Contractor Performance And Shall Compare Contractor Performance To The Acceptable Quality Level (aql). technical Exhibit I performance requirement/ Indicator performance Standard performance measure (aql) monitoring Method/method Of Surveillance incentive waste Collection/pickup For Both Rmw And Sharps Containers (section B3s) within Time Specified By Each Facility deviation) direct Observation. Random Sampling. And Customer Complaints positive Past performance & Exercise Option Period treat And Disposal Of Waste (section B3bi And B3b3) dispose Of In Accordance With Osha, Epa. & Local. State, And Federal Regulations deviation) direct Observation And Random Sampling positive Past performance & Exercise Option Period pickup-disposal documents-the Contractor Shall Provide Monthly Record Of The Weights For Medical Waste Picked Up And Disposed From Each Site (section B3k) final Documents Received Within 2 Weeks After The End Of The Month deviation) direct Observation And Random Sampling positive Past performance & Exercise Option Period contractor Shall Supply Annual Solid Waste Reports Of Weights And Costs For All Facilities To The Gems coordinator Via co And/or Cor (section B3k) by January 3 Of Each Year 100% (no Deviation) periodic Inspection. Annual positive Past performance & Exercise Option Period packaging, Materials And Labeling (include Bar Code): Contractor Shall Supply All Containers And Labels And Placards To Include Bar Coding Labels For Tracking. The Exception Is The Yellow Containers Discussed In Section B3b3. The Labels And Placards Are Necessary To Satisfy Federal, State And Local Laws For Package Content Identification, Transportation Over Public Thoroughfares And Transfer To Any Company Involved In The Destruction, Recovery, Or Burial Bio-hazardous Material. This Shall Also Be Part Of Contractor's Quality Assurance Program. Records: Contractor Shall Maintain A Log Of Regulated Medical Waste And Regulated "sharps Waste" Shipments Which Include Quantity Of Waste Shipped, Sources, And Delivery Points (note: This Requirement Shall Not Be Confused With Manifest Requirement Mentioned And Referred To Elsewhere). Records Shall Be Kept On File For A Minimum Of Three Years From Contract Expiration. Regulated Medical Waste Containers: Containers Shall Be Made Of Rigid Plastic Construction Designed To Prevent Puncture By Needles And Other Shams, Capacity Not To Exceed 96 Gallons, And Shall Include Locking Safety Handles Along With Appropriate Bio-hazard Warning Symbols Approved By The State And Federal Regulatory Agencies. Contractor Shall Maintain The Refuse Containers And Equipment In A State Of Satisfactory Repair (no Broken Wheels Or Lids, Sharp Points) And Appearance (free Of Dirt/old Paper Stickers) Determined By The Cor. Contractor Shall Have Containers Disinfected Inside And Out Using And Centers For Disease Control (cdc) Approved Disinfectant Before Returning Them To The Medical Center Or Clinics For Use. Disinfectant Material Safety Data Sheet (msda) Information Shall Be Provided By The Contractor To The Cor Prior To Use. license, Permits And Insurance: Contractor Shall Be Properly Licensed By Federal, State And Local Authorities To Provide Pickup, Removal And Disposal Of Biohazardous Waste And Insured. Contractor Shall Attach Copies Of Licenses, Permits, And Proof Of Insurance Indicated Above With Their Proposal At Time Of Proposal Due Date And Shall Maintain All Required Licensing, Permitting, And Insurance Throughout The Life Of The Contract. Contractor Shall Provide Name, Address, Contact Name And Telephone Number Of All Disposal Facilities To Be Used Under This Contract, With Their Proposal At Time Of Offer Due Date. Contractor Shall Make Complete Distribution Of The Waste To A Reliable Licensed Facility Approved By All Federal, State, And Local Regulatory Bodies For Disposal. Contractor Liability: Contractor Shall Assume All Liability For The Medical Waste Removed From The Va Property From The Time Of Pick-up Until The Total Distribution Of The Waste By Incineration, Sterilization, Or Other Disposal Method, Which Must Comply With Environmental Protection Agency (epa), Occupational Safety And Health Administration (osha), Cdc, Department Of Environmental Management For Applicable State, Department Of Environmental Quality (deq) For Applicable State, And/or Iaw Other Controlling Agency With Oversight Authority. Government Responsibility: Government Will Be Responsible For Properly Packaging And Storing Bio-hazardous Waste. manifest Documentation/report: 1. The Contractor Shall Provide Tracking Of Medical Waste From The Point Of Pickup, Through Use Of An Epa, Deq For Applicable State, And Dot Approved Manifest System. The Contractor Shall Provide Hard Copy Documentation (manifest Sheets) To Include Contactor's Company Information To The Center, Indicating Time And Date Of Pickup, Time And Date Of Incineration, And Weight Of Each Container Received (one Weight Exception Is For Panama City-mental Health Clinic Due To Box). Contractor Staff Shall Engage Only Authorized Ems Staff (cor Or Designee) To Sign Manifests Of Waste In Accordance With Dot And State Requirements. Contractor Shall Provide Final Copy Within Two (2) Weeks After The End Of The Month Of Service. 2. Contractor Shall Provide An Annual Solid Waste Report By January 31st Of Each Year. The Report Should Reflect Total Pounds Of Solid Waste Generated For The Year And Total Va Cost Of Disposal. Report Can Combine All Sites/locations. This Report Shall Be Forwarded To The Green Environmental Management System (gems) Coordinator By The Co And/or Cor. Transportation: Contractor Shall Provide Transportation In Compliance With Dot Regulations. Trucks Shall Have Leak-proof Compartments For Containing Medical Waste And Shall Have Built-in Spill Control Technology. Contractor Shall Provide Proof Of Access (ownership/rental Agreement) For Trucks To Be Used Under This Contract With Their Proposal At Time Of Offer Due Date. Vehicles Shall Be Properly Disinfected As A Result Of Leaks Or Spills. Contractor Shall Immediately Notify The Department Of Health (doh) For The Applicable State, And The Va, If A Vehicle Is Involved In A Spill Or Accident Which Renders The Vehicle Non-compliant With Applicable Rules And Regulations. contingency Planning: The Contractor Shall Develop And Submit To The Contracting Officer, A Copy Of Their Contingency Plan In The Event Of Vehicle Breakdown, Disposal Facility Breakdown, Natural Disaster, Or Employee Strike. The Contingency Plan Shall Include Plans For Emergency/hazmat Response And Provide A Full Complement Of Safety Equipment. The Contingency Plan Shall Include Notification Procedures For Informing The Cor Of Any Actuation Of The Contingency Plan To Prevent Possible Violation Of Interstate Laws. Contractor Shall Provide This Plan With Their Proposal At Time Of Offer Due Date. contractor's Facility: The Va Reserves The Right To Thoroughly Inspect The Contractors' Facilities And Treatment Plant To Assure Acceptable Standards Of Performance. contractor Personnel: The Number Of Contractor Personnel Shall Be Adequate To Perform Daily Work Efficiently And Maintain Required Professional Standards. Truck Drivers Shall Be Able To Present A Valid Operator's License/permit When Requested And Shall Be Thoroughly Acquainted With And Comply With Va Traffic Regulations. Contract Personnel Shall Report To The Cor Or Ems Designee Upon Arrival And Departure Of Each Facility. Contractor Shall Notify The Cor Of Any Problems Or Delays With Containers, Transportation, Storage, Or Other Significant Problems. identification Badges (id): Within Five (5) Working Days Of Contract Award The Contractor Shall Provide The Names Of Personnel (including Subcontractors If Applicable) That Will Be Working Under This Contract By Completing A Contractor's Id Badge Worksheet, See Attachment G. The Contracting Officer Will Forward To Human Resources Fingerprinting Section, Prior To Commencement Of Work. Contractor Personnel Shall Report To Hr With Two Forms Of Id, Most Commonly Driver's License And Social Security Card. An I9 Form Will Be Signed And Fingerprints Taken. The Individuals Will Then Be Given Further Instructions To Obtain Their Photo Identification (id) Badge Including Company Name. Badges Will Be Worn At All Times While On The Premises Of The Va. Badges Will Be Placed In A Visible Location, Above The Waist, Clipped To The Front Of Wearing Apparel With Photo And Name Clearly Visible. Identification Badges Will Be Turned Into The Cor Within Ten (10) Working Days Of Contract Expiration Or Within Ten (10) Working Days If An Employee Leaves The Contractor's Company. The Cor Will Then Forward The Badges To Appropriate Va Staff Within Five (5) Working Days. charges For Net Weight: The Contractor Stall Charge Only For The Net Weight Of Waste Excluding Weight For The Containers. Net Weight Is To Be Shown On Each Manifest At The Time Of Pick Up, (one Weight Exception Is For Panama City Mental Health Clinic Due To Box). untimely Services: In The Event That Service Is Not Furnished Within The Scheduled Or On-call Time Frames Specified In This Solicitation For Each Location, The Va Reserves The Right To Obtain The Services From Another Source And To Charge The Contractor With Any Costs Which May Result Thereof. delivery Schedule- Locations/pickups: Contractor Shall Provide Scheduled Pick-up And Delivery For Rmw As Stated Below Unless Contractor Provides An Alternate Day(s) For Approval By Noting It Next To The Location Below If Necessary. Sharps Containers Pick-up Schedule Is To Be Determined Upon Completion Of Site Visit/survey And Will Be Included On Attachment H. va Medical Center (biloxi Division) Bldg.73 (back Dock) 400 Veterans Avenue biloxi, Ms 39531 rmw Schedule: 5 Times Per Week, Monday Through Friday joint Ambulatory Care Center (jacc) Room Ib-183 790 Veterans Way pensacola, Fl 32507 (this Facility Is Located Between The Naval Hospital And Navy Shopping Center Off Highway 98) Rmw Schedule: Once A Week, Thursday eglin Air Force Base Outpatient Clinic room 186 100 Veterans Way fl Walton Beach. Fl 32542 rmw Schedule: Every Other Thursday mobile Va Clinic room 1e104 4444 Demetropolis Road mobile, Al, 36619 rmw Schedule: Every Other Wednesday panama City Community Based Outpatient Clinic Cboc) 140 Richard Jackson Blvd. panama City, Fl 32407 rmw Schedule: Once A Week, Thursday panama City Mental Health Clinic [referred To As Magnolia] 2600 Veterans Way panama City, Fl 32408 rmw Schedule: Once A Week, Thursday Special Contract Requirements Services: 1. The Services Specified In The Sections Entitled Schedule Of Supplies/services (price). Performance Work Statement And Contained Anywhere Else Herein May Be Changed By Written Modification To This Contract Only By A Warranted Contracting Officer. 2. This Is A Non-personal Services Contract. There Is No Employer-employee Relationship Between The Va And The Contractor Or Contractor's Employee(s). 3. The Service To Be Performed By The Contractor Shall Be Performed In Accordance With Applicable Va Policies And Procedures, Along With All Federal, State, And Local Rules And Regulations That Govern The Collection And Disposal Or Medical Waste. term Of Contract: The Term Of This Contract Is April 1, 2024, Through September 30, 2024, With Four (4) Each 12-month Option Periods To Be Exercised At The Government's Discretion. All Option Periods Are Subject To The Availability Of Funds. hours Of Work: the Services Covered By This Contract Shall Be Furnished As Defined Herein. The Contractor Shall Not Be Required, Except During The Phase-in Process And In Case Of Emergency, To Furnish Such Services During Off-duty Hours Or Holidays As Described Below. the Following Terms Have The Following Meanings: work Hours: Monday Through Friday, 8:00 A.m. - 4:30 P.m. national Holidays: The Ten (10) Federal Holidays Observed By The Federal Government For This Requirement Are: federal Holiday date month new Year's Day 1 january birthday Of Martin Luther King Jr third Monday january washington's Birthday third Monday february memorial Day last Monday may independence Day 4 july labor Day first Monday september columbus Day second Monday october veterans Day november thanksgiving Day fourth Thursday november christmas 'day 25 december when A Federal Holiday Falls On A Sunday, The Following Monday Shall Be Observed As A Federal Holiday. When A Federal Holiday Falls On A Saturday, The Proceeding Friday Is Observed As A Federal Holiday By U.s. Government Agencies. Also Included, Would Be Any Other Day, Specifically Declared By The President Of The United States Of America To Be A Federal Holiday. The Va Will Be Closed On The Above Federal Holidays And Service Is Not Required On These Days. off-duty Hours: Friday Through Monday. 4:31 P.m. 7:59 A.m. Orders: A Task Order For Services Will Be Issued For Each Individual Site/facility. Contractor Shall Assign A Separate Account Number For Each Site/facility. Exception Is For Panama City Which Has Two Locations Included. qualifications Of Offers: Removed And Inserted In Addendum To 52.212-1 -instructions To Offerors. Quality/performance Monitoring: 1. The Objective Of Monitoring Contractor's Performance Is To Evaluate How The Contractor Is Performing And To Ensure Compliance With Key Requirements Of The Contract. 2. As Referred To In Section B3 Performance Work Statement This Monitoring Shall Be Accomplished By Utilizing Attachment D -quality Assurance Surveillance Plan (qasp). 3. Other Requirements Not Specifically Listed On The Qasp May Be Monitored Periodically But Will Not Be Subject To The Performance Measure. Payments: Payments Will Be Made In Arrears. Monthly Or Quarterly. Upon Electronic Submission And Receipt Of A Properly Executed Invoice For Services Rendered. Please Request Electronic Funds Transfer Payment Form (sf 3881) If Not Already In The Va's Financial Management System, Austin, Tx. Patient Privacy And Training: 1. Patient Privacy: Contractor Will Provide The Services To Collect, Manifest, Remove And Dispose Of Biohazard Medical Waste For The Va. As Such, Contractor Shall Follow The Privacy Act. 5 U.s.c Sec 552b, And 38 U.s.c Sections 5701, 7705, And 7332. Contractor And Its Employees May Accidently Come Across Va Patient Information; If So, The Incident Must Be Reported Immediately To The Cor Or Contracting Officer. Notwithstanding Any Other Provision Of This Contract, The Contractor And Its Employees May Not Disclose Patient Information And Are Subject To The Penalties And Liabilities Provided In The Statues And Regulations Mentioned Above For Unauthorized Disclosures Of Such Information. 2. Privacy Training: Contractors Are Required To Complete Approximately One (1) Hour Of Mandatory Annual Va Provided Privacy Training Which Will Be Provided By Co Before Any Work Begins Under The Contract. All Employees Of The Contractor Will Be Required To Participate In The Privacy Training And Will Acknowledge By Signature That They Have Reviewed The Training Materials. The Signed Documents Will Be Collected And Forwarded To The Contracting Officer Before The On-site Works Begins. The Contractor Shall Pay The Expense Of This Privacy Training Which Is Minimal. 3. Privacy Information: The Contract Employee, If No On-site Supervisor Available, Shall Secure In A Sealed Envelope And Relinquish Documents Found On Any Campus Or The Va That Contains Personally Identifiable Information Within 1 Hour Of Discovery. The Sealed Envelope Shall Be Hand Delivered To Mrs. Lisa Barnes, Gcvhcs, Information System Security Officer, Bld. 2, Room No. A 132, Or Phone: 228-523-5526 Or To Police Services, Building 17, 228-523-5100/5872 For Further Instructions If Not Located On Biloxi Campus. personally Identifiable Information: 1. The Term Personally Identifiable Information Means Any Information About An Individual Maintained By The Va, Including But Not Limited To. Education, Financial Transactions, Medical History, And Criminal Or Employment History And Information Which Can Be Used To Distinguish Or Trace An Individual's Identity, Such As Their Name, Social Security Number, Date Of Birth. Mother's Maiden Name, Biometric Records, Etc., Including Any Other Personal Information Which Is Linked Or Linkable To An Individual. Smoking Policy: 1. The Va Medical Facility And Cbocs Are Smoke-free Facilities. Smoking Is Not Permitted Within The Confines Of The Buildings Nor Is Smoking Permitted Within 50 Feet Of Any Door To The Facility. Smoking Is Permitted In Designated Areas Only. 2. Failure To Comply With The Smoking Policy Will Result In Immediate Removal Of Contractor/contractor Personnel From The Facility. Designation Of Contracting Officer's Representative (cor): The Cor Will Be Designated To Monitor And Certify The Receipt Of Services Rendered Under This Contract. The Cor Shall Have The Following Scope And Limitations Of Authority (a Formal Designation Letter Will Be Issued At Time Of Award): 1. Provide Schedules Of Service To Be Performed For The Government That Fall Within The Contract Work Scope. 2. Certify Acceptance Of Services Received In Accordance With The Contract Requirements. 3. Furnish Technical Guidance And Advice To Contracting Officer And Monitor Services Performed Under The Contract. 4. Report Any Deficiencies In Performance, Quality Of Service, Safety Practices And Questions On Contract Performance Or Suspensions Of Work To The Contracting Officer. 5. Certify Contractor Invoices For Payment Of Services Rendered In Accordance With The Contract Terms. this Delegation Of Authority Does Not Include Any Authority To Make Changes In Quantity, Quality, And Delivery. The Contracting Officer, Acting Within The Scope Of His/her Authority, Will Make All Changes To The Contract Especially Those That Will Affect Price, Quantity, Or Quality Of Performance Of This Contract. In The Event The Contractor Effects Any Such Change At The Direction Of Any Person Other Than The Contracting Officer, The Change Shall Be Considered To Have Been Made Without Authority And No Adjustment Will Be Mode To The Contract Price To Cover Any Increase In Costs Incurred As A Result Thereof. This Designation Is Issued Through The Term Of This Contract Commencing On The Date When The Va Contracting Officer Executes This Contract, Unless Revoked In Writing By The Contracting Officer. Hhs/oig: To Ensure That The Individuals Providing Services Under The Contract Have Not Engaged In Fraud Or Abuse Regarding Sections 1 128 And 1 128a Of The Social Security Act Regarding Federal Health Care Programs, The Contractor Shall Check The Health And Human Services - Office Of Inspector General (hhs/oig), List Of Excluded Individual/entities On The Oig Website (www.https://oig.hhs.gov) For Each Person Providing Services Under This Contract. Further The Contractor Shall Certify By Memo To The Co In Its Proposal That All Persons Listed In The Contractor's Proposal Have Been Compared Against The Oig List And Are Not Listed. During The Performance Of This Contract The Contractor Is Prohibited From Using Any Individual Or Business Listed On The List Of Excluded Individual/entities From The Above Website. Personnel Policy: 1. The Contractor Shall Be Responsible For Protecting The Personnel Furnishing Services Under This Contract To Carry Out This Responsibility, The Contractor Shall Provide The Following For These Personnel: workers Compensation income Tax Withholding, And Social Security Payments. 2. The Parties Agree That The Contractor, Its Employees, Agents, And Subcontractors Shall Not Be Considered Va Employees For Any Purpose. evidence Of Insurance Coverage: The Contractor Shall Furnish To The Contracting Officer A Certificate From His/her Insurance Company Indicating That The Contractor Has Obtained Liability Insurance Coverage As Outlined In The Far Clause 5228-5 Insurance Required For Work On A Government Installation" And Cl-120 "supplemental Nsurance Requirements" And That It May Not Be Changed Or Canceled Without Written Notice To The Contracting Officer. The Furnishing Of Such Evidence Of Insurance Coverage May Not Be Waived And The Certificate Of Insurance Shall Be Submitted With Proposal Or The Contractor May Furnish The Completed "notification Of Compliance With Insurance Requirements" As Included On The Next Page. This Is Also Required Of Any Subcontractors. requested Information: (1) Statement Of Cabability: Submit A Brief Description, Five (5) Pages Or Less, That Demonstrates How Your Company Has The Supervision, Facilities, Labor, And Experience To Perform The Scheduled And Unscheduled Pharmaceutical Waste Collection, Transport And Disposal As Described Above. Include Experience In Performing These Services To The Va, Other Government (federal Or State) Agency, Or For A Private Facility. Please Specify Your Availability To Start Date And Your Address. (2) Business Size And Socio-economic Status: (a) Indicate Whether Your Business Is Large Or Small (b) If Small, Indicate If Your Firm Qualifies As A Small, Emerging Business, Or Small Disadvantaged Business (c) If Disadvantaged, Specify Under Which Disadvantaged Group And If Your Firm Is Certified Under Section 8(a) Of The Small Business Act (d) Indicate If Your Firm Is A Certified Hub-zone Firm (e) Indicate If Your Firm Is A Woman-owned Or Operated Business (f) Indicate If Your Firm Is A Certified Service-disabled Veteran Owned Small Business (sdvosb) Or Veteran Owned Small Business (vosb) (g) Include The Duns Number Of Your Firm. (h) State Whether Your Firm Is Registered With The Beta.sam.gov At Https://beta.sam.gov And/or The Vetbiz Registry At Https://vetbiz.va.gov , (i) Note That Any Future Solicitation Could Only Be Awarded To A Contractor Who Is Registered In Sam And To Receive Award Based On Vosb Or Sdvosb Status You Must Be Registered In The Vetbiz Registry. responses Shall Be Submitted To 36c25624q0456 No Later Than 3pm Cst, Wednesday, February 14, 2024. Fax Or Telephone Calls Will Not Be Accepted. Your Response Should Include Both The Statement Of Cabability And Business Size And Socio-economic Status Information As Explained Above. Please Place "attention: Medical Waste Removal And Disposal Biloxi, Ms . This Is A Sources Only. A Solicitation Is Not Currently Available And May Not Develop From This Rfi. If A Solicitation Is Issued It Will Be Announced Later And All Interested Parties Must Respond To That Solicitation Announcement Separately From The Responses To This Announcement.

Details: Description Lot 1 - Foods And Beverages Services Nc Ii 1 200 Pieces Chair Dining Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimension: Total Height - 33" X 15" X 15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality 2 8 Set Coffee Pot, 2 Pints Type: Manual Drip Body Shape: Round Material : Stainless Steel With Cover Capacity : 2 Pints Outside Diameter : 90 -110 Mm Over-all Height : 200 - 230 Mm Thickness : 0.5 - 1 Mm With Handle And Spout Packed In Carton Box The Item Must Have Good Quality 3 20 Pieces Container, Creamer Design: Type: Porcelain With Spout Body Shape: Circular, Material: Porcelain Diameter : 50 - 65 Mm Height : 80 - 105 Mm Color: White Appearance : Glossy White Packed In Carton Box The Item Must Have Good Quality 4 96 Pieces Cups And Saucers 5-6 Oz. 1. Material : Porcelain 2. Capacity : 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color : White 5. The Item Must Be Of Good Quality 5 96 Pieces Fork, Cocktail 1. Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design 2. Type: Rounded Tip Handle 3. Over-all Length: 110-165mm 4. Width: 20-30mm (minimum) 5. Handle Thickness: 2mm To 4mm 6. Handle Length: 75-90mm 7. Small 8. Color: Silver The Item Must Be Branded And Have Good Quality. 6 96 Pieces Fork, Dessert Type: Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design, Rounded Tip Handle Length: 150mm-175mm Width: 20-30mm Handle Thickness: 1.5mm-3mm Number Of Tines: 4 Handle: 130mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 7 96 Pieces Fork, Dinner Type: Dinner Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Over-all Length: 120-175mm Thickness Of Handle: 2-3mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 8 96 Pieces Fork, Fish Type: Fish Fork Body Shape: Fork Shape With Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design Over-all Length: 180-215mm Fork Width: 1.5mm-3mm Fork Thickness: 1mm-2mm Number Of Tines: 4 Length Handle: 120-130mm Handle Thickness: 2mm-3mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 9 96 Pieces Fork, Oyster Type: Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90-120mm Thickness: 1mm-3mm Silver Color With Three Short Wide Curved Tines Packed In Plastic Pouch The Item Must Be Of Good Quality 10 96 Pieces Glass, Champagne Flute Type: Flute Glass Body Shape: Round Material: Clear Crystal Glass Dimension: Height: 20-24cm, Top Diameter: 50-70mm, Bottom Diameter: 60-80mm Capacity: 250ml (minimum) Thickness: 1.5-3mm Packed In Carbon Box The Item Must Have Good Quality 11 96 Pieces Glass, Collins Type: Tumbler Body Shape: Round Material: Clear Glass Capacity: 10oz To 14 Oz Thickness: 1.5-3mm (minimum) Packed In Carbon Box The Item Must Have Good Quality 12 96 Pieces Glass, Juice / Hi-ball 1. Material : Clear Glass 2. Type: Hi-ball 3. Height: 140-160mm 4. Bottom Diameter: 50-70mm 5. Top Diameter: 50-70mm 6. Thickness: 2-4 (minimum) 7. Capacity: 8oz. To 10oz. 8. Dishwasher Safe 9. The Item Must Be Branded And Good Quality Packed In Carton Box 13 96 Pieces Glass, Pilsner (ice Tea Glass) Type: Flaired Rim Body Shape (round Slender) Material: Clear Glass Capacity: 20oz. To 23oz. Over-all Length: 22-25cm Thickness Of Glass: 1-3mm With Flaired Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality 14 96 Pieces Glass, Red Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55-60mm Thickness: 1.5mm-3mm Over-all Length: 200-220mm Capacity: 250-300ml Stem Diameter: 6-8mm Stem Length: 85-90mm Base Diameter: 75-85mm Base Thickness: 2-4mm 15 96 Pieces Glass, White Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55-60mm Thickness: 1.5-3mm Over-all Length: 200-220mm Capacity: 270-300ml Stem Diameter: 6-8mm Base Diameter: 70-80mm Base Thickness: 2-5mm 16 16 Pieces Gravy Boats Type: Steel Type Body Shape: Boat Shape With Handle Material: Stainless Steel Capacity: 5oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Packed In Plastic Pouch 17 8 Sets Ice Bucket, 2 Liters With Tongs Type: Steel Type Body Shape: Circular Set Includes: A. Ice Bucket Material : Stainless Steel Diameter : 140 - 180 Mm Height : 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity : 2 Liters (minimum) The Item Must Have Good Quality 18 96 Pieces Knife Butter 1. Material : Stainless Steel W/ Highly Polished Appearance 2. Over-all Length : 140 Mm - 150 Mm 3. Handle Thickness : 3 Mm - 5 Mm 4. With Dull Edge And Rounded Tip 5. The Item Must Have Good Quality. Packed In Carton Box 19 96 Pieces Knife, Dinner Type: Dinner Knife Body Shape: Flat With Round Tip Material / Appearance : Stainless Steel Blade Highly Polished Handle Material : Stainless Steel Overall Length : 160 - 190 Mm Blade Thickness : 2 - 4 Mm Handle Thickness : 3 - 6 Mm Serrated Blade With Rounded Tip Packed In Carton Box The Item Must Have Good Quality 20 96 Pieces Knife, Fish Type : Fish Knife Body Shape: Flat With Pointed Tip Material / Appearance : Stainless Steel, Highly Polished W/ Plain Design Overall Length : 200 - 220 Mm Width Blade : 20 - 25 Mm Thickness Of Blade : 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Wide Blade, Dull Edge, Tip Made With A Notched Point Color : Silver Packed In Carton Box The Item Must Have Good Quality 21 8 Pieces Menu Folder Type: Leather Menu Folder Body Shape: Rectangular Material: Leather With 2 Partitions And 6 Inserts Size: 31.5cm X 24.5cm Color: Brown/black Applicable Paper Size: A4 22 24 Pieces Napkin Holder Type: Steel Type Body Shape: Rectangular Material : Stainless Steel With Highly Polished Appearance Dimension : Width : 70 - 90 Mm X Length : 150 - 170 Mm , Thickness : 0.7 Mm -2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 23 8 Pieces Order Pads Type: Numbered Pads Body Shape: Rectangular Material : 80 Gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Can Take 1000 Orders Before You Run Out Packed In A Plastic Pouch 24 8 Pieces Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case Food Grade And Nontoxic Must Be Branded 25 32 Pieces Plate Covers Type: Steel Type Body Shape: Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Packed In Plastic Pouch The Item Must Have Good Quality 26 96 Pieces Plate, Dessert, 7” To 8” Type: Plain Type Body Shape: Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color : White Inner Diameter: 145 To 165 Mm Thickness : 3 To 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 27 96 Pieces Plate, Dinner, 10” Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Color: White Inner Diameter : 200 Mm - 215 Mm Outer Diameter : 250 - 260 Mm Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 28 96 Pieces Plate, Fish, 8” To 9” Type: Plain Type Body Shape: Circular Material : Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color : White Inner Diameter : 165 Mm - 190 Mm (minimum) Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 29 32 Sets Round Table (8’s) Type: Foldable Body Shape: Round Material: High Density Polyethylene Tabletop Powder Coated Steel Frame Size: 154cm X 74cm X4.5cm (minimum) Good For 8 To 10 Seater Capacity Tube Size : 28 Mm Diameter X 1 Mm Thickness Packed In A Carton Box The Item Must Have Good Quality 30 96 Pieces Salad Forks Type: Salad Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Length: 150 Mm - 175 Mm Thickness Of Handle : 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 31 96 Pieces Salad Knife Type: Salad Knife Body Shape: Semi Rectangular Blade With Pointed Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Overall Length: 145 -160 Mm Blade Thickness: 2 Mm To 4 Mm Handle Thickness: 4 Mm To 6 Mm Handle Material: Stainless Steel Rounded Tip Handle Packed In Carton Box The Item Must Have Good Quality 32 96 Pieces Salad Plates 7” To 8” Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Supply Must Be A Set Consisting Of One (1) Each: 7 Inches And 8 Inches Plates Color: White Diameter (inner): 150 Mm - 165 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 33 16 Pieces Salt And Pepper Shakers Type: Glass Type Body Shape: Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Aluminum Cover Packed In Carton Box The Item Must Have Good Quality 34 8 Pieces Sauce Ladles Type: Spouted Bowl Body Shape: Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 35 8 Pieces Server, Cake 1. Material : Stainless Steel Blade , Highly Polished Appearance 2. Over-all Length : 220 To 270 Mm 3. Width : 60 - 80 Mm 4. Thickness : 1.5 Mm To 2 Mm 5. Handle : 120 -140 Mm Long, Non-toxic Plastic 6. Shape : Shovel-shaped 7. Color : Silver 8. The Item Must Have Good Quality Packed In Carton Box 36 24 Pieces Service Forks Type : Service Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Packed In Plastic Pouch 37 24 Pieces Service Tray Type: Plastic Body Shape: Rectangular Material: Plastic (pp) Size : 14 Inches X 18 Inches X 1 Inch (minimum) Color : Any Packed In Plastic Pouch The Item Must Have Good Quality 38 24 Pieces Show/service/base Plates 11” Type: Plain Type Body Shape: Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches; - 12 Inches; - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces 39 96 Pieces Side Plates Or Bread Plates 6” Type: Plain Type Body Shape: Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness : 3 Mm - 6mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 40 16 Pieces Side Towels Type: Chef's Towel Body Shape: Rectangular Material: Oxford Polyester Soft Cloth Over-all Length : 640 - 680 Mm Over-all Width : 420 -460 Mm Color : Plain White Packed In Plastic Pouch The Item Must Have Good Quality 41 32 Pieces Silver Platter Type: Steel Type Body Shape: Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 42 96 Pieces Soup Bowl Type: Plain With Two Handles Body Shape: Circular Material : Porcelain Capacity : 24 Oz. (minimum) Packed In Carton Box The Item Must Have Good Quality Packed In A Carton Box 43 8 Pieces Soup Ladle Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length : 220 -235 Mm Ladle Bowl Details: 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Handle Details: 145 - 155 Mm Long X 12 - 25 Mm Wide X 1.5 -3 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access 44 16 Pieces Soup Tureen Type: Steel Body Shape: Round Material: Stainless Steel Capacity: 7 - 11 Quart Size : 60 X 35 X 32 Cm (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 45 96 Pieces Spoon, Dessert Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 46 24 Pieces Spoons, Service Type : Service Spoon Body Shape: Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 47 96 Pieces Spoons, Soup (cream And Consume) Type: Soup Spoon Body Shape: Round Material/appearance : Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length : 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Shorter Handle : 110 Mm - 170 Mm Thickness : 1.5 Mm - 3 Mm Color: Silver Packed In Plastic Pouch 48 96 Pieces Steak Knife Type: Steak Knife Body Shape: Flat With Serrated Edge Material: Stainless Steel Blade With Wooden Handle Length: 170 Mm To 203 Mm Handle Wood Thickness: 10 - 14 Mm With Serrated Blade Packed In Carton Box The Item Must Have Good Quality 49 20 Pieces Sugar Container Type: Glass Type Body Shape: Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Packed In Carton Box The Item Must Have Good Quality 50 16 Pieces Table Cloth, 54 X 54 Inches Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Color: Plain White Dimension: L 54 Inches X W 54 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 51 8 Pieces Table Cloth, Rectangular Type: Plain Cloth Body Shape: Rectangle Material : Linen Size : 120cm X160cm (minimum) Color : Any Color But Not Black Feature: Washable Packed In A Plastic Pouch 52 120 Pieces Table Napkins, Cloth, 16” X 16” Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Size: L 16 Inches X W 16 Inches (minimum) Color: Plain White Packed In Plastic Pouch The Item Must Have Good Quality 53 8 Pieces Table Skirting Cloth 90” X 90” Type: Plain Cloth Body Shape: Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 54 48 Pieces Table, Square/rectangular (4’s Or 6’s) Type: Foldable Plastic Body Shape: Square/rectangle Material: High Density Polyethylene Tabletop Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Good For 4 Persons Packed In Carton Box The Item Must Have Good Quality 55 8 Pieces Tea Pot, 2 Pints Type: Porcelain Type Body Shape: Round With Handle And Pouring Spout Material : Porcelain Capacity : (2 Pint) Color : White Packed In Carton Box The Item Must Be Of Good Quality 56 96 Pieces Teaspoon Type : Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 57 8 Pieces Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 58 16 Pieces Toothpick Holder Type: Steel Type Body Shape: Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 59 8 Pieces Tray Stand Type: Foldable Body Shape: Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Packed In Plastic Pouch The Item Must Have Good Quality 60 8 Pieces Tray, Bill Folders/change 1. Material : Heavy Duty Plastic ( Abs ) Or Its Equivalent 2. Height : 190 - 220 Mm 3. Width : 120 -140 Mm 4. Thickness : 2 Mm To 3 Mm (minimum) 5. Color: Black 6. With Check And Pen Holder 7. The Item Must Have Good Quality Packed In Plastic Pouch 61 32 Pieces Tray, Round (bar) Type: Plastic Body Shape: Round Material: (pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Packed In Plastic Pouch The Item Must Have Good Quality 62 96 Pieces Water Goblet Type: Water Goblet Body Shape: Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Packed In Carton Box The Item Must Have Good Quality 63 24 Pieces Water Pitcher Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality Lot 2 Cookery Nc Ii And Bread & Pastry Production Nc Ii 1 12 Pieces Apple Corer Type: Apple Corer Body Shape: Tubular Material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Preferably With Packing Case Dishwasher Safe 2 3 Pieces Bain Marie, Table Type: Bain Marie Table (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Source: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60 Hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 3 3 Pieces Blender, Electric Type: Blender Machine Body Shape: Round Jar Material Housing: Plastic (polypropylene) Jar Height : 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220 Volts / 240 Volts,50 Hz / 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades 4 48 Pieces Board, Chopping/cutting, Plastic Type: Cutting Board Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe 5 3 Pieces Boiler, Double Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 6 24 Pieces Braising Pan, Medium Type: Braising Pan Body Shape: Round Material: Enameled Cast Iron And Stainless Steel Size: Diameter: 28 Cm X Height: 10 Cm (minimum) Capacity: 4 Liters (approximate) With Stainless Steel Cover, Solid Cast Stainless Steel Side Handles And Riveted Handle On Both Side: Length: 10 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 7 3 Pieces Can Opener Type: Can Opener Body Shape: Materials: Stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Multi-use: 3 In 1 Can Opener Also Opens Bottle Tops- Can Lids And Tabs 8 12 Pieces Casserole, Medium Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 24 Cm X Height -14 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Preferably With Packing Case 9 36 Pieces Casserole, Small Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 20 Cm X Height -12 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 10 6 Pieces Colander, Medium Type: Colander, Medium Body Type: Round Material: 304 Stainless Steel Diameter: 30 Cm (minimum) Capacity: 8 Quarts (9 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 To 10 Mm 11 12 Pieces Colander, Small Type: Colander (small) Body Shape: Round Material: 304 Stainless Steel Diameter: 26 Cm (minimum) Capacity: 5 Quarts (5.6 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Body Thickness: 0.8 Mm (minimum) Full-ring Support Base, 15 Cm Diameter Preferably With Packing Case Food Grade And Dishwasher Safe 12 24 Pieces Cup, Measuring (for Solid) Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 13 12 Pieces Dispenser, Paper Towel Type Paper Towel Dispenser Body Shape: Rectangular Material: Abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Mounting Style: Wall Mounted Tissue Box 14 3 Pieces Fan, Electric Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names 15 3 Pieces Fire Extinguisher (with Contents) 1. For Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2. Portable Type 3. Capacity: 5-6kgs 4. Rechargeable Cylinder Metal 5. Working Pressure Of Cylinder: 400 Psi 6. Brass Valve With Pressure Gage 7. With Rubberized Hose And Aluminum Nozzle Attached With Squeeze Lever To Discharge And Safety Pin 8. Painted With Metal Primer And Red Enamel Paint 16 3 Pieces Fish Poacher, Medium Type: Fish Poacher Body Shape: Oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12 Cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 17 9 Pieces Fork, Carving Type: Carving Fork Body Shape: Square Shape Prong Prong Material: High Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prong Comes With Square- Shaped Prongs And Pointed Tips Abs Plastic Triple-riveted Handle Preferably With Packing Case 18 24 Pieces Fork, Kitchen Type: Kitchen Fork Body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle :abs Plastic Number Of Tines: 2 Tines With Tapered End 19 6 Pieces Frying Pan, Large Type: Frying Pan (large) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-30 Cm (minimum) X Height- 5.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 20 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 20 24 Pieces Frying Pan, Medium Type: Frying Pan (medium) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-24 Cm (minimum) X Height- 4.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 19 Cm Long (minimum) Preferably With A Packing Case 21 36 Pieces Frying Pan, Small Type: Frying Pan (small) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-20 Cm (minimum) X Height- 3.8 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 12 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 22 12 Pieces Funnel, S/s, Medium Type: Stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-15 Cm (minimum) X Height- 15.8 Cm (minimum) Tube Diameter: 2 Cm X Length: 7.3 Cm (minimum) Comes With Handle For Easy Hanging Preferably With Packing Case Dishwasher Safe 23 12 Pieces Funnel, S/s, Small Type: Stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe 24 12 Pieces Garbage Bin Type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With A Packing Case Color: Any Color 25 36 Pieces Glass Rack Type: Glass Rack Body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 1/2 Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case 26 6 Pieces Ice Cream Scooper Type: Ice Cream Scooper Body Shape: Round Material: Stainless Steel Scoop: Diameter- 5 Cm X Deep-2.5 Cm (minimum) Handle Length: 10 To 12 Cm 27 24 Pieces Knife, Boning Type: Flexible Boning Knife Body Shape: Ergonomic Material: High Carbon Steel Overall Length: 28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets Preferably Wiht Packing Case Dishwasher Safe 28 30 Pieces Knife, Chef Type: Chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) 29 6 Pieces Knife, Cleaver Type: Cleaver Knife Body Shape: Flat Blade Material: Forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum) Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets 30 12 Pieces Knife, Oyster Type: Oyster Knife Body Shape: Ergonomic Blade Material: Stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) 31 3 Pieces Light, Emergency Emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome 32 3 Pieces Meat Slicer Type: Meat Slicer Body Shape: Circular Housing Material: Die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 33 24 Pieces Pastry Tube Type: Pastry Tubes Body Shape: Tube In Different Shape Of Nozzles Material: Stainless Steel Set Contain: 24 Different Shapes Of Nozzles (minimum) Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Stars, Leaves And Other Designs 34 24 Pieces Peeler, Y-type Type: Y-type Peelers Body Shape: Ergonomic Material: Stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Handle Material: Stainless Steel Handle Length: 4 3/4 Inches X 1 Inch Diameter (minimum) 2 In 1 Design With 2 Blade Reel, Built In Potato Eye Remover And Hole For Hanger 35 24 Pieces Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case 36 24 Pieces Piping Bag Type : Piping Bag Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 37 36 Pieces Plate Rack Type: Plate Rack Body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) 38 15 Pieces Preparation Table With Sink Type: Preparation Table With Sink & Shelves Body Shape: Rectangular Material: Stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Tabletop And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) 39 3 Pieces Pressure Cooker Type: Pressure Cooker Body Shape: Round Material: Polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring 40 12 Pieces Roasting Pan Type: Roasting Pan Body Shape: Rectangular Material: Stainless Steel Dimension: Length: 40 Cm X Width-35 Cm X Height -7 1/2cm (minimum) Thickness: 1.5 Mm Thick (minimum) Welded Handles On Both Sides Removable Stainless Steel Wire Rack 41 24 Pieces Scissor, Kitchen Type: Kitchen Scissor Body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum) Width: 7.5 Cm (minimum) 42 24 Pieces Siever, Small Type: Fine Mesh Siever Body Shape: Round Material: Stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Preferably With A Packing Case 43 24 Pieces Skimmer, Fine Type: Medium Fine Mesh Skimmer Body Shape: Round Material: Stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Handle Has Hole For Hanging Preferably With A Packing Case 44 24 Pieces Skimmer, Spider Type: Skimmer, Spider Body Shape: Round Material: Stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm (minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Preferably With A Packing Case Dishwasher Safe 45 36 Pieces, Soup Cup Rack Type: Soup Cup Rack Body Shape: Square Material: Polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm No. Of Compartment: 16 Compartments 46 6 Pieces Soup Ladle, 12 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 34 Cm (minimum) Capacity: 12 Oz. (341 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 47 24 Pieces Soup Ladle, 3 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 48 24 Pieces Soup Ladle, 6 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 6 Oz. (170 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 49 6 Pieces Soup Ladle, 8 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 8 Oz. (236 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case 50 24 Pieces Spatula Type: Offset Spatula Body Shape: Flat Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length: 12 To 14 Inches Preferably With A Packing Case Dishwasher Safe Must Be Branded. 51 24 Pieces Spoon, Kitchen Type: Kitchen Spoon Body Shape: Oval Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe Must Be Branded. 52 24 Pieces Spoon, Kitchen (slotted) Type: Kitchen Spoon Slotted Body Shape: Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe 53 24 Pieces Spoon, Measuring Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 54 24 Pieces Spoon, Parisienne Type: Parisiennes Spoon Body Shape: Round Double Headed Parisiennes Scoop Bar Tool Material: Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Draining Small Hole In The Scoop 55 72 Pieces Spoon, Serving Type: Serving Spoon Body Shape: Oval Materials: Stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 56 24 Pieces Spoon, Wooden Type: Wooden Spoon Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 57 6 Pieces Stock Pot, Large Type: Stock Pot, Large Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. With Aluminum Disc Layer In Bottom For Even Heat (5 Mm Aluminum 58 9 Pieces Strainer Chinois, Small Strainer Chinois, Small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 59 6 Pieces Strainer Chinois, Medium Type: Strainer Chinois, Medium Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 60 24 Pieces Strainer Medium, Fine Type: Strainer, Medium Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded. 61 24 Pieces Strainer Small, Fine Type: Strainer, Small Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded. 62 24 Pieces Tenderizer, Medium Type: Tenderizer Body Shape: Ergonomic Material: Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes Weight: 250 Grams To 500 Grams Preferably With A Packing Case Dishwasher Safe Must Be Branded 63 9 Pieces Thermometer, Pocket/pin Type: Pocket/pen Thermometer Body Shape: Tubular Pen Style Digital Thermometer Product Size: 100 Mm X 40 Mm X 14 Mm (minimum) Display Size: 40 Mm X 20 Mm (minimum) Prove Length: 200 Mm (minimum) Measuring Range: -50 °c To 300 °c (-58 ⁰f To 372 ⁰f) Resolution: 0.1 °c / 0.2 °f 64 24 Pieces Tong, 12 Inches Type: Tong , 12 Inches Body Shape: Standard Material: Stainless Steel Size: 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 65 30 Pieces Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe 66 24 Pieces Tray, Baking, Small Type: Baking Tray Body Shape: Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Preferably With Packing Case Dishwasher Safe Must Be Branded. 67 36 Pieces Tray, Utility Type: Utility Tray Body Shape: Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Finish: Polished Preferably With A Packing Case Washable And Oven Safe 68 24 Pieces Turner 3” X 6” Type: Slotted Turner, 3" X 6" Body Shape: Straight Material: Stainless Steel Blade Size (lx W): 6 Inches X 3 Inches (minimum) Handle Length: 5 Inches (minimum) Overall Length: 13 Inches (minimum) Solid Turner With Straight Slotted Blade Wooden Handle With Triple Rivets Preferably With A Packing Case Dishwasher Safe Must Be Branded 69 3 Pieces Utility Cart Type: Utility Cart Body Shape: Rectangular Material: Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Preferably With A Packing Case Easy Grip Handles On Each End Of Cart 70 12 Pieces Weighing Scale, 1 Kg, Digital Type: Digital Weighing Scale Body Shape: Rectangular Materials: Engineering Plastic And Stainless Steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: L X W X H Mm ) 163 Mm X 245 Mm X 79 Mmm (minimum) 71 6 Pieces Weighing Scale, 5kg Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 72 24 Pieces Wire Skimmer, Small Type: Skimmer, Wire Mesh Body Shape: Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Preferably With A Packing Case Dishwashing Safe Must Be Branded. 73 6 Pieces Wire Whisk, Heavy Duty Type: Wire Whisk, Heavy Duty Body Shape: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 74 24 Pieces Wire Whisk, Medium Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 75 24 Pieces Wire Whisk, Small Type: Wire Whisk, Small Body Shape: Balloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 76 3 Pieces Wok, Medium Type: Wok, Medium Body Shape: Round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded. 77 12 Pieces Wok, Small Type: Wok, Small Body Shape: Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded. 78 6 Pieces Working Table Type: Working Table, Stainless Steel Body Shape: Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Fully Welded Construction Thickness: Gauge 16 (1.29 Mm Thick) Minimum Stainless Steel Table Top With Stainless Steel Undershelf Distance Between Table Top And Undershelf Is 650 Mm (minimum) Preferably With A Packing Case Or Crate No Sharp Edges And Rough Surfaces Must Be Branded. 79 24 Pieces Zester Type: Cheese Zester Body Shape: Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe The Plastic Material Used Must Be Non-toxic Must Be Branded. Bread And Pastry Production Nc Ii 1 2 Set Air Compressor With Airbrush Cake Decorating Set Tight-tolerance Head Provides Extremely Fine Atomization With Razor-sharp Detail Needle Backstop At The Rear Of The Airbrush Allows You To Pre- Set The Trigger Travel, Producing Consistent Line Widths Includes Pre-installed 0.2mm Nozzle (tip), Nozzle Cap, Needle, And Removable Needle Cap For A Spray Pattern Between Hairline And 3/4″ (20mm) Fine-finish, Stainless-steel Needle Minimizes Tip-dry Gravity-feed 2cc Color Cup Won’t Obstruct Your View During Fine Detail Work Solvent-resistant Needle Packing Allows Safe Use With All Types Of Spraying Mediums Uses Standard 1/8″ Bsp Air Hose Fittings 2 12 Pieces Beater 3 12 Pieces Board, Chopping, 6 Color The Item Shall Have The Following Specifications: 1) Material: Polypropylene, Food Grade 2) Board Size: Length: 18 Inches 3) Width: 12 Inches 4) Thickness: 0.75 To 1 Inch 5) Color: Assorted Colors, 6 Different Colors Per Set 6) With Hole For Storage Purposes 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 4 2 Pieces Boiler, Double Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 5 24 Set Bowl, Mixing (6 Pieces/set) 6 12 Pieces Cake Pans, Round #4, #6, #8, #10, #12, #14, #16 7 12 Pieces Cake Stand, With Tier Type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tier Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3 : 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Assembled Column Is Used For Maximum Strength And Stability Of The Stand Must Be Packed In Set Smooth And No Sharp Edges 8 6 Pieces Cake Turn Table Type: Turn Table Body Shape: Circular Material: Cast Aluminum Plate And Cast Iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm Turntable With Ball Bearing To Turn Easier Preferably Packed In Any Kind Of Packaging Comes With No Sharp Edges To Rotate Smoothly In 360 Degrees Clockwise Or Counter Clockwise 9 26 Pieces Coupler Type: Food Grade Body Shape: Tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case The Materials Used Must Be Non-toxic And Dishwasher Safe 10 24 Pieces Cup, Measuring (for Solid) Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 11 24 Pieces Cup, Measuring, 250ml For Liquid Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 12 24 Pieces Cup, Measuring, 500ml For Liquid The Item Shall Have The Following Specifications: 1) Material: Clear, Non-porous Glass 2) Food Grade 3) Freezer And Microwave Safe 4) Holds 500 Ml, With 25 Or 50 Ml Increment And With Specified Metric And English System Of Measurement 5) With Handle & Spout For Easy Pouring 6) With Permanent Graduation Markings 7) Item Must Be Branded 13 2 Pieces Cutter, Dough Type: Scrapper Body Shape: Straight Blade Material: Stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Length : 15 Cm X Width: 11 Cm X Thickness: 1.2 Mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage 14 12 Pieces Cutter, Pie The Item Shall Have The Following Specifications: 1) Blade Material: 2 Mm (minimum) Stainless Steel 316 2) Cuts 8 Even Slices, With Handle On Both Sides 3) Diameter: 26 Cm 4) Food Grade 5) The Materials Used Must Be Non-toxic. 6) The Item Must Be Branded. 15 12 Pieces Flour Sifter, Hand Cranked Type: Hand Cranked Body Shape: Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm (minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh # 30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Spring Action Squeeze Handle Stainless Steel Preferably With A Packing Case Dishwasher Safe 16 12 Pieces Grater Type: Four Sided Box Grater Body Shape: Box In Shape Material: Stainless Steel Blade And Plastic (polypropylene Handle) Grater Dimensions: Height- 25 Cm X Width-13 Cm X Depth-10 Cm (minimum) Side 1: Large-hole Shredder With 6 Mm Hole Side 2: Slicer Side 3: Small-hole Shredder With 3 Mm Hole Side 4: Grater With Strips About 1.27 Cm To 2.54 Cm Length Preferably With Packing Case Food Grade & Dishwashing Safe 17 12 Pieces Knife, Kitchen The Item Shall Have The Following Specifications: 1) Material: Stainless Steel Blade 2) Handle Material: Hard Plastic ( Polypropelene) 3) Overall Length: 10 Inches (minimum) 4) Blade Length: 5 Inches (minimum) 5) Handle Length: 5 Inches (minimum) 6) Thickness Of Blade: 1/8 Inches (minimum) 7) Blade Width: 1.5 Inches (minimum) 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 18 12 Pieces Knife, Pallet The Item Shall Have The Following Specifications: 1) Blade Material: Stainless Steel 316 2) Handle Material: Hardwood (smooth Finish) 3) Blade Dimension 4) Length= 7 .5 Inches (minimum) 5) Width = 1.5 Inches (minimum) 6) Thickness Of Blade: 3/16 Inches (minimum) 7) Total Length = 12 To 14 Inches 8) The Item Must Be Branded. 19 12 Pieces Ladle, 3 Oz. Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 20 12 Pieces Loaf Pan Big The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Length: 15 Inches (minimum) 4) Width: 4 1/2 Inches (minimum) 5) Depth: 4 Inches (minimum) 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 21 12 Pieces Loaf Pan, Medium The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Length: 12 Inches (minimum) 4) Width: 4 1/2 Inches (minimum) 5) Depth: 4 Inches (minimum) 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 22 12 Pieces Loaf Pan, Small The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Length: 8 Inches (minimum) 4) Width: 4 1/2 Inches (minimum) 5) Depth: 4 Inches (minimum) 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 23 12 Pieces Muffin Pan, Big The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Cup Diameter (top): 3 7/8 Inches 4) Length: 13.75 Inches (minimum) X Width: 10.5 Inches (minimum) X Depth: 2 Inches (minimum) 5) Number Of Cups In A Tray: 6 Cup 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 24 12 Pieces Muffin Pan, Medium The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Cup Diameter (top): 3 1/4 Inches 4) Length: 13.75 Inches (minimum) 5) Width: 10.5 Inches (minimum) 6) Depth: 1 1/2 Inches (minimum) 7) Number Of Cups In A Tray: 12 Cup 8) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 9) Food Grade 10) The Materials Used Must Be Non-toxic. 11) The Item Must Be Branded 25 12 Pieces Muffin Pan, Small The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Depth: 1.13 Inches (minimum) 4) Length: 20.63 Inches (minimum) 5) Width: 14.13 Inches (minimum) 6) Number Of Cups In A Tray: 24 Cup 7) Cup Diameter (top): 2 3/4 Inches 8) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 9) Food Grade 10) The Materials Used Must Be Non-toxic. 11) The Item Must Be Branded. 26 12 Pieces Pie Pan, 10 Inches Diameter The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 1/16 Inch (minimum) 3) Depth: 3 To 5 Inches 4) Set Must Each Contain The Following Volume Capacities: 6inches - 1.5 Liters (minimum) 8inches - 2.1 Liters (minimum) 10inches - 2.6 Liters (minimum) 12inches - 3.3 Liters (minimum) 14inches - 3.7 Liters (minimum) 16inches - 4.2 Liters (minimum) 5) Rolled Edge For Better Strength And Smooth Surface With No Sharp Edges 6) Food Grade 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded. 27 12 Pieces Pie Pan, #6, #8, #10 The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 1/16 Inch (minimum) 3) Depth: 3 To 5 Inches 4) Set Must Each Contain The Following Volume Capacities: 6inches - 1.5 Liters (minimum) 8inches - 2.1 Liters (minimum) 10inches - 2.6 Liters (minimum) 12inches - 3.3 Liters (minimum) 14inches - 3.7 Liters (minimum) 16inches - 4.2 Liters (minimum) 5) Rolled Edge For Better Strength And Smooth Surface With No Sharp Edges 6) Food Grade 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 28 12 Pieces Pillars, Cake The Item Shall Have The Following Specifications: 1) Material: Crystal Clear Fiber Plastic, Food Grade 2) Tube Diameter: 2.5 Cm (minimum) 3) Base And Top Diameter: 3.5 Cm (minimum) 4) Height: 13 Cm (minimum) 5) Four ( 4 )pcs Per Set. 6) The Materials Used Must Be Non-toxic. 7) The Item Must Be Branded. 29 50 Pieces Piping Bag The Item Shall Have The Following Specifications: 1) Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries 2) Food Grade 3) Length: 9 Inches Minimum 4) Width: 3 Inches (minimum) 5) Volume: 1 Liter (approximate) 6) The Materials Used Must Be Non-toxic. 7) The Item Must Be Branded. 30 8 Pieces Rectangular Pan, 1 X 8 The Item Shall Have The Following Specifications: 1) Material: Aluminum 2) Thickness : 1/16 Inch (minimum) 3) Dimensions: # 8 : 11 Inches X 7 Inches X 2 Inches 4) Oven Safe To 500°f / 260°c 5) Food Grade 6) The Materials Used Must Be Non-toxic. 7) The Item Must Be Branded. 31 12 Pieces Rolling Pins The Item Shall Have The Following Specifications: 1) Material: Hardwood (solid Wood In Natural Color) 2) Dimensions: 2.36 Inches Diameter X 9.45 Inches Length 3) 1.57 Inches Root Diameter X 2.76 Inches (approximate Dimensions) 4) Handle Length: 3.15 Inches 5) Smooth Surface Finish With No Sharp Edges 6) Smooth Rotation Of The Revolving Barrel 7) Materials Used Must Be Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 32 12 Pieces Rubber Scraper The Item Shall Have The Following Specifications: 1) Material: Silicone Blade (head) & Plastic Handle, (polypropylene ) 2) Color: Any Color 3) Head Length: 11.5 Cm (minimum) 4) Head Width: 7.0 Cm (minimum) 5) Handle Length : 24 To 30 Cm 6) Safe Working Temperature : -40°f To 446°f 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 33 12 Pieces Sauce Pan The Item Shall Have The Following Specifications: 1) Material: Stainless Steel 2) Diameter: 16 Cm 3) Height: 8 Cm 4) With Stainless Steel Cover 5) Welded Handle (insulated) : 15 To 17 Cm 6) Thickness: 1.8 To 2 Mm 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 34 12 Pieces Sheet Pan The Item Shall Have The Following Specifications: 1) Material: Aluminum 2) Thickness: 1/16 Inch (minimum) 3) Length: 17 Inches (minimum) 4) Width: 12 Inches 5) Height: 3/16 Inches (minimum) 6) Smooth Finish Surfaces Without Sharp Edges 7) Corrosion Resistant 8) Superior Heat Conduction 9) Oven Safe To 500°f / 260°c (maximum) 10) Heat Resistant 11) Food Grade 12) The Item Must Be Branded. 35 50 Pieces Spoon, Measuring Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 36 12 Pieces Spoon, Wooden The Item Shall Have The Following Specifications: 1) Material: Beechwood Or Equivalent 2) Length :12 Inches (minimum) 3) Width: 2.6 Inches (minimum) 4) Depth = 1.0 Inch (minimum) 5) No Hole Or Slot Within The Spoon Bowl 6) Smooth Surface Finish With No Sharp Edges 7) Handle With Hole For Hanging Storage Purposes 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 37 12 Pieces Strainer The Item Shall Have The Following Specifications: 1) Material: Stainless Steel Frame 2) Thickness Of Frame: 1/16 Inch Diameter (minimum) 3) Handle: Stainless Steel 4) Basket Material: Stainless Steel Wire Mesh, Very Fine Mesh 5) Diameter: 8 Inches (minimum) 6) Half-rounded Mesh 7) Smooth Surfaces With No Sharp Edges 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 38 40 Pieces Tip, Decorating The Item Shall Have The Following Specifications: 1) Materials: Stainless Steel 2) Tube Height: 1 To 1.25 Inches 3) Tube Diameter: 0.7 To 1 Inch 4) Tube Tip: Assorted Designs 5) Wall Thickness: 1/32 Inch (minimum) 6) Tube Shape: Conical 7) The Materials Used Must Be Non-toxic 8) The Item Must Be Branded 39 12 Pieces Weighing Scale, 10kgs The Item Shall Have The Following Specifications: 1) Material: Aluminum Pan And Metal Body (coated) 2) Color: Any Color 3) Mechanism Type: Spring Lever 4) Capacity: 10 Kg / 22 Lb. 5) Sensitivity/graduated By 10 Gm 6) Measurement Units: Gram/kilogram 7) Manual Setting On Zero, Must Be Accurate And Durable 8) The Materials Used Must Be Non-toxic. 9) Delivery Must Include Correct Instruction Manual Written In Good English 10) Warranty Period Of 1 Year 11) The Item Must Be Branded 40 12 Pieces Weighing Scale, 5kgs, Digital The Item Shall Have The Following Specifications: 1) Materials: Engineering Plastic 2) Capacity: 5 Kg 3) Accuracy: 1 Gram 4) Four-digit Lcd Display 5) Auto Power Off 6) Size: ( L X W X H Cm ) 24 Cm X 17 Cm X 4 Cm 7) Battery Operated, Two Aaa Batteries 8) Warranty Period Of 1 Year 9) The Item Must Be Branded. 41 12 Pieces Wire Whisk, Medium The Item Shall Have The Following Specifications: 1) Material - Stainless Steel 2) Overall Length - 12 Inches (minimum) 3) Depth - 3 Inches (minimum) 4) Whip Length: 7 Inches (minimum) 5) Diameter Of Wire: 2/32 Inches (minimum) 6) Handle Length: 5 Inches (minimum) 7) Number Of Looped Wire = 6 (minimum) 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded Lot 3 Hairdressing Nc Ii 1 2 Pieces Body Brush, Prosthetic Material: Stiff Nylon Bristle Size: At Least 41.8 Cm X 6.5 Cm (over-all Size) Brush Height: 8mm(minimum) With Wooden Handle 2 2 Pieces Bowl, Mixing, Plastic Material: Plastic Inner Diameter: 10.5 Cm (minimum) Height: 6cm (minimum) Thickness Is 2mm (minimum) Any Color Non-toxic 3 4 Pieces Bowl, Shampoo Bowl Material: Abs Plastic With Adjustable Stand (height: 39 Inches To 54 Inches) Minimum Bowl Dimensions: 19 Inches(l) X 20 Inches(w) X 10 Inches(h); With Sealed Foam Rubber Neck Rest For Shampoo Bowls With Hose Attachment Of 7 Ft. Long(minimum) Stainless Steel Frame Portable Type Packed With Shipping Carton Box Branded 4 2 Pieces Box, Hairpin Material: Plastic Bristle Paddle Brush Type Wooden Handle Minimum Width: 2 Inches Non Toxic Packed With Protective Carton Box 5 2 Pieces Brush, Applicator Material: Plastic Non-toxic Size: Small=190mm Length Medium=270mm Large=300mm Handle Width:70mm (minimum) Width Of Tip: 80mm (minimum) With Hair Coloring Dyeing Board Packed With Plastic Pouch 6 2 Pieces Brush, Hair Material: Plastic Bristle Paddle Brush Type Wooden Handle Minimum Width: 2 Inches Non Toxic Packed With Protective Carton Box 7 2 Pieces Cap, Frosting, With Hook Cap Material: Silicone Type: Reusable, Perforated Cap One Size Fits All Or At Least 31cm X 22cm With Pre-cut Tipping Guides With Bleed Proof Inner Liner With A Rounded Metal Hook To Pull Hair Through The Ready Made Perforations Packed With Plastic Pouch 8 2 Pieces Cap, Heating Waterproof Cloth Material. Cordless Type To Fit An Average Size Head (21-24 Inches) Stretch Up To 29 Inches Unisex Hair Care Treatment Styling Reversible And Reusable, Non Toxic Includes With User's Guide In English That Contains: A. Diagram Of The Parts With Their Names B. Operating Procedure On How To Use The Equipment C. Safety Precaution When Using The Equipment Basic Troubleshooting And Maintenance Procedure 9 2 Pieces Cape Polyester Cloth Size: At Least 125 Cm X 140 Cm Hairstyling Type Non Toxic Packed With Plastic Pouch 10 6 Pieces Chair, High Bar Stool Material: Metal, Painted With Anti Rust Width Of The Chair:15 Inches Minimum Height :33 Inches (minimum) Synthetic Leather Seat Material Barstool Crown Back Type With Rubber Ring Of Barstool For Anti Skidding 11 12 Pieces Chair, Hydraulic Material: Metal Base Size:length59 Cm, Width54 Cm, Height From 51-78cm Hydraulic Pump Can Be Up And Down By Pedaling Load Capacity:180kg Hydraulic Styling Chair Type Heavy Duty Hydraulic Pump For Height Adjustable And 360' Rotation Hydraulic Pump Build In For Adjusting The Seating Height. With Foot Rest 12 2 Pieces Clamp Material: Plastic Overall Length: 9.5cm Thickness:10mm(minimum) Hairstyling Clamp Type 13 2 Pieces Clamp, Duck Bill Material: Metal Length: 11 Cm (minimum) High Elasticity Stainless Steel Spring. Nonslip Handle Packed With Plastic Pouch Branded 14 2 Pieces Clipper, Hair Body Material: Hard Plastic Blade Material: Carbon Steel Capacity:6 Watts (minimum) Complete With Blade Guard And 4 Comb Attachments (#1, #2, #3, #4) Motor: Magnetic Type, Corded,12v Ac/dc Adaptor Delivers 1,400 Strokes Per Minute, With Complete Accessories Including The Cleaning Brush With Cord 2 Meters Length Minimum With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures, Packed With Protective Carton Box Branded 15 2 Pieces Comb, Afro Material: Plastic Size: Overall Length At Least 7 Inches Width: 3.25 Inches(minimum) Number Of Teeth: 12 Teeth (minimum); Teeth Height: 2.5 Inches Long (minimum) 16 2 Pieces Comb, All Purpose Material: Plastic Size#3 Or At Least 18 Cm Long (minimum) Has Both Fine And Medium Teeth Position On One Side Only Height Of The Teeth: 2 Cm (minimum) Non Toxic Packed With Plastic Pouch 17 2 Pieces Comb, Haircutting Material: Hard Plastic Length Including The Handle:180mm (minimum) Width: 30mm (minimum) With Detachable Steel Blades And Blade Holder With Two Sides For Different Cuts With Extra Blades 18 2 Pieces Comb, Large Toothed Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length Non Toxic Packed With Plastic Pouch 19 2 Pieces Comb, Tail Material: Plastic Size : 8 Inches(l)minimum X 1 Inches (w) Minimum Tail Length: 4 Inches(minimum) Tooth Length: 3/4 Inch(minimum) Packed With Plastic Pouch 20 2 Pieces Comb, Teasing Material: Plastic With 2 Rows Of Teeth 1st Row: Large Teeth With At Least 25 Mm Long 2nd Row: Small Teeth With At Least 19 Mm Long Over-all Comb Size: 20 Cm (l) Minimum X 3.8 Cm (w) Minimum Non Toxic Packed With Plastic Pouch 21 2 Pieces Comb, Wide Tooth Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length 22 12 Pieces Crimpers Power: 25 Watts(minimum) Size: At Least 38 Cm X 15.5 Cm X 9 Cm Maximum Temperature: 200 Degrees Centigrade With Variable Heat Setting. With On/off Switch Button Rated Voltage: 110 -230volts Ac With Power Cord With Plastic Handle 23 12 Pieces Curling Iron Ceramic Curling Iron Capacity: 65watts Voltage: 210-240volts Ac With Power Cord Barrel Size: 1 Inch (minimum) Adjustable Heat Setting With Maximum Temperature Of 200 Degrees Centigrade Swivel Cord Up To 360 Degree 24 2 Pieces Drip Pan Material: Hard Plastic Size: At Least 17.5 X 25.8 X 1 Inches Thickness: 1/8 Inch (minimum) Shallow Rectangular Type Packed With Carton Box 25 12 Pieces Dryer, Hair Power: 1000w Rated Voltage: 220vac At Least (l X W X H): 18.5cm X 16cm X 6.5cm With Plastic Handle Design Packed With Carton Box With Styrofoam Holder With User's Manual In English Which Includes: A. Parts Manual With Labels B. Assembly Instructions 26 2 Boxes Gloves, Disposable Material: Plastic Size: At Least 25cm X 23cm Packaging Is 100 Pcs Per Box 27 2 Pieces Gloves, Rubber Size: Medium Thickness: 4 Mil Acid Resistant Packed With Plastic Pouch In Pairs. 28 2 Pieces Gown, Smock Material: Polyester Sizes: 1 Piece = Small Size, At Least (50 Inches X 56 Inches); 1 Piece= Medium Size, At Least (52 Inches X 58 Inches); 1 Piece= Large Size, At Least (54 Inches X 60 Inches); Packed With Plastic Pouch Per Size 29 2 Pieces Hairclips Material: Metal Size: At Least 67mm X 19mm Noncorrosive Packed With Plastic Pouch 30 2 Pieces Hairnet, Invisible Material: Nylon Size: 55mm (minimum) Stretchable And Unisex Type Color: Black Non Toxic Packed With Plastic Pouch 31 2 Pieces Headband Size: 6 Inches (minimum) Woven Crochet Tube Top Headband Very Stretchy, Soft Material, Comfortable And Breathable 32 2 Pieces Headband, Flannel Flannel Cloth Size : At Least 45 Cm (unstretched Circumference) Width: 8 Cm (minimum) 33 2 Pieces Infrared Iron Material: Ionic Ceramic Tourmaline-infused Plates And Abs Plastic Body Power: 70 Watts (minimum) Power Rating: 220-240 Volts Ac; Over-all Size: 24 Cm Long (minimum) Heating Plate Size Up To 50 Mm Heating Time: Within 30 Seconds; Variable Heat Settings: From 250 To 450 Degrees Fahrenheit With Digital Temperature Control Safety Mode: Auto Shut Off After 60 Minutes; With Swivel Cord Comes With Storage Pouch Branded 34 20 Pieces Mirror, Hand Mirror Size 15 Cm Diameter (minimum) Frame Thickness Including Mirror Glass: 6.5mm(minimum) Over-all Length With The Handle Is 20 Cm (minimum) Clear Mirror With No Distortion Frame And Handle Are Made Of Plastic Plane Mirror Type Packed With Carton Box With Styrofoam Protection 35 2 Pieces Mirror, Modular Mirror Type: Plain Mirror Mirror Material: Glass Frame Material: Aluminum (cut To Fit) Dimensions (hxw): 75 Cm X 65 Cm (minimum) Mirror Thickness: 6mm (minimum) 36 2 Pieces Prong Clip, Double Material: Steel Nickel Or Chrome Base Plated Size: 45 Mm Minimum Hairstyling Clip Type Packed With Plastic Handle 37 2 Pieces Prong Clip, Single Material: Steel, Plated Size: 55 Mm (minimum) Type: Single-prong Clip Packed With Plastic Pouch 38 2 Pieces Razor, Straight Blade Material: High Carbon Steel Type: Foldable Straight Razor, Replaceable Blade; Dimensions (lxw): 14 Cm X 2 Cm (minimum) When Folded; Compatible With Double-edged Razor Blades; Package Includes 10 Pieces Blade/box Noncorrosive Branded 39 2 Pieces Roller Pins Material: Metal Size: 60mm Long (minimum) Application: Hair Roller Pins Quantity By Dozen (12 Pieces) Noncorrosive Packed With Plastic Pouch 40 2 Pieces Rollers, Jumbo Material: Plastic Approximately 44mm In Diameter X 64mm Long 41 2 Pieces Rollers, Large Size Material: Plastic Size: At Least 40mm Diameter X 60mm Long Hairstyling Type Packed With Plastic Pouch 42 2 Pieces Rollers, Medium Size Material: Plastic; Diameter: 38 Mm(minimum) Length: 58mm (minimum) Hairstyling Type Packed With Plastic Pouch 43 2 Pieces Scissor, Cutting Material: Stainless Steel Total Length: 17cm (minimum) Blade Width At Least 10 Cm Noncorrosive Packed With Plastic Pouch Branded 44 2 Pieces Scissor, Thinning Blade Material: High Carbon Steel Blade Length At Least 6cm With Straight Blade Type Style: Right-handed Scissor Total Length At Least 17cm One Side Comb Cutter Noncorrosive Packed With Plastic Pouch Branded 45 2 Pieces Scoop Material: Plastic Capacity:1/2 Cup (minimum) Rounded Edges With Handle Thickness: 1.5 Mm (minimum) 46 4 Pieces Shower Cap Material: Plastic Size: One Size Fits All Or 30cm Reusable And Waterproof Packed With Plastic Pouch 47 2 Pieces Spatula Material: Plastic Dimension: Over-all Length Of 7.5 Cm Long, X 1.5 Cm Wide (minimum) Application: Hair Waxing Removal Packed With Plastic Pouch 48 2 Pieces Spray Gun Material: Transparent Plastic Capacity: 300ml (minimum) Trigger Type Sprayer Dimension: At Least Diameter Of Bottom Is 7 Cm And The Height Is 17cm 49 2 Pieces Steamer, Hair Power 450 Watts (minimum) Rating Is 220 Volts/50-60hz Hood Material: Polycarbonate Hood Has At Least 30 Cm Diameter Opening X 25 Cm Deep Timer Setting Is Up To 60 Minutes With At Least 32-ounce Water Reservoir Adjustable Height From 100 To 150cm With At Least 5 Swivel Casters With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Operating Procedures, Branded 50 12 Pieces Stool Material: Metal, Electroplated Load Capacity: 150kg Design: Swivel Stool With Backrest With Hydraulic Lift To Adjust Height Freely. With Thick Sponge Cushion. With At Least Four Caster Wheels. With Thick Sponge Cushion. Swivel Stool With Backrest No Sharp Edges Branded Housekeeping Nc Ii 1 2 Pieces Alarm Clock Alarm Clock, Digital, Overall Dimensions: 13.5 X 8 X 4.5 Cm (approx.) Material: Plastic (pe/abs) Illuminated Lcd Digital Display: Time (12/24), Calendar (mm/dd), Temperature, Alarm Status (on/off), Snooze Display Size: 10 X 5 Cm (minimum), Time Can Be Read 30 Ft Daytime. Runs On Aaa Battery Which Come Together With The Item Smooth Surface, No Sharp Edges, Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting. 2 50 Pieces Apron, Polyester-cotton Bib Apron, Sleeveless Adjustable Neck Loop Material: Polyester - Cotton Fabric Dimension: 70 To 60 Cm (minimum) With 2 Or 3 Pockets Uni-color, Dark No Sharp Edges And Loose Threads 3 10 Pieces Baskets, Laundry 3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions: Rectangular 22 X 15 X 8 Inch (minimum) Frame Material: Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions: Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2-inch Diameter (minimum) Smooth Surface, No Sharp Edges 4 2 Pieces Bed, Queen Bed Set, Queen Size (60 X 75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Headboard, Bare Weight: 20 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. No Sharp Edges 5 2 Pieces Bed, Single Bed, Single Size (w36 X L75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 13 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. No Sharp Edges 6 2 Pieces Board, Ironing Type: Foldable Type Ironing Board Body Shape: Standard Material: 25 Mm Tubing Approx., 0.8 Mm Thickness Board Size: 32 Inches (minimum) Body Size :120 Cm X 30 Cm X 5 Cm Color: Any Comes With Box No Sharp Edges 7 20 Pieces Boots, Safety, Plastic Upper Material: Elastic Pvc Sizes: 7inches - 5pcs 8inches - 5 Pcs 9inches - 5 Pcs 10inches - 5 Pcs 11inches - 5 Pcs Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size 8 10 Pieces Brushes, For Housekeeping Brush, Floor Scrubbing, Angled Long Handle Bristle Material: Plastic, Stiff Handle Material: Metal Tubular Corrosion Resistant, Overall Length : 120 Cm. (minimum) Bristle Length: 5 Cm (=/- 1cm) Scrubbing Surface: 25 X 6 Cm (+/-1 Cm) No Sharp Edges 9 10 Pieces Buckets, Water Water Bucket Bucket Material: Hard Plastic, Round Body Capacity: 10 To 12 Liters Handle Material: Steel Smooth And Glossy Surface, No Sharp Edges 10 2 Pieces Caddy, Toilet Carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material: Plastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges 11 2 Pieces Carpet Sweeper Carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material: Hard Plastic, (abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width: 8 Inches (minimum) Capacity (volume): 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting. 12 2 Pieces Cart, For Housekeeping Nc Ii Housekeeping Cart Trolley Equipped With Three-shelves With Steel/laminated Panels Single Door, Top Layer With Divider, Bag Holder, And 4 Wheels Cart Frame: Steel, Powder Coated Wheels: 2non-swivel 2 Swivel, 6 Inch Diameter, Non-markings Overall Dimensions: Rectangular 90 X 48 X 1010 Cm (minimum) Comes With Accessory Linen Bag Smooth Surface, No Sharp Edges 13 20 Pieces Cleaning Cloths, Lint-free Lint Free Cleaning Cloths Material: Cotton Dimensions : Rectangular 16 X 26 Inch 14 2 Pieces Coffee Maker Coffee Maker, Electric Material: Metal, Plastic, Glass Capacity: 6 Cups (minimum) Detachable Tank, With Water Level Indicator Non-stick Warming Plate: Removable And Washable Filter Non-drip Valve: Lighted On/off Switch Power Supply: 220 V -240 V Ac 50/60 Hz, 500w Minimum Comes With A Heat-resistant Glass Pitcher With A 1-meter (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item Comes With English Manual That Contains Users Guide, List Of Parts, Maintenance Guide, Safety Guide 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. 15 10 Pieces Dustpan Dustpan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges 16 10 Pieces Duster, Anti-static Anti-static Duster Duster Material: Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material: Hard Plastic, No Sharp Edges 17 4 Pieces Fan, Electric Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service 18 6 Pieces Fire Extinguisher (with Contents) 1. For Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2. Portable Type 3. Capacity: 5 - 6 Kgs 4. Rechargeable Cylinder Metal 5. Working Pressure Of Cylinder: 400 Psi 6. Brass Valve With Pressure Gage 7. With Rubberized Hose And Aluminum Nozzle Attached 8. With Squeeze Lever To Discharge And Safety Pin 9. Painted With Metal Primer And Red Enamel Paint 10. Includes With User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment C. 11. 1 Year Warranty Parts And Service 12. The Item Must Be Branded And Have Good Quality 19 10 Pieces Flashlight 11 Flashlight Led 12 1,000 Lumens (minimum), Color: White, Battery: Rechargeable, At Least 3,500 Mah , Can Be Used Also With 3 X Aaa Batteries; Body: Aluminum Alloy, No Sharp Edges 13 Dimensions: 5 Inches X 1 Inch Diameter (minimum) 14 Operating Duration Of Battery When Fully Charged: At Least 2 Hours; Includes 220/240vac, 50/60hz Power Adapter /charger And User's Manual In English Which Includes: 15 A. A Diagram Of The Parts With Their Names, 16 B. Operating Procedures On How To Use The Equipment, 17 C. Safety Precautions When Using The Equipment, 18 Basic Troubleshooting And Maintenance Procedures Branded, With 1 Year Warranty 20 2 Pieces Flat Iron Clothes Flat Iron, Electric Material: Metal /plastic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension: (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. 21 20 Pieces Foam, Scrubbing A. Material: Cellulose And A Scouring Pad On One Side B. Dimension: Length: 140 - 180 Mm; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm The Item Must Be Of Good Quality 22 4 Pieces Garbage Receptacles 1. Bucket / Tub Material: Hard Plastic, (ps) Polystyrene 2. Bucket / Tub Color: Any Color 3. Capacity (gallons): 3 Gal. (minimum) Comes With A Cover The Item Must Have Good Quality 23 50 Pieces Gloves, Rubber 1. Heavy-duty Latex-free Vinyl Rubber Gloves 2. Thickness: 4 Mil 3. Color: Any Color 4. Size: Medium 5. Other Features: Acid/solvent Resistant. The Item Must Be Of Good Quality 24 30 Pieces Goggles, Safety Safety Goggles, Clear Polycarbonate - One Piece Lens With 180° Panoramic View, Non-fog Size/dimension: L 17 - 18.5 Cm X W 8 Cm X D 5-7.5 Cm High Impact Resistant, Ansi "z87" Compliant Firm And Comfortable Seal Around Forehead, Cheeks, Nose And Temples Protects Against Splash, Chemicals, Dust Adjustable Head Strap Shall Bear Mark Z87 Embossed Or Engraved Or Etched On The Item. Smooth Surface, No Sharp Edges 25 2 Pieces Hairdryer Electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating: 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service) 26 4 Pieces Hose, Water Water Hose Material: Pvc Fiber Reinforced, Three (3) Layers; Any Color. Hose Length: 50 Feet. Hose Diameter: 5/8 Inches; Pressure Capacity: 200 Pounds Per Square Inch (minimum); Fitted With Male And Female Brass Couplers (nh, 11.5 Tpi) For Spray Nozzle No Sharp Edges 27 2 Pieces Kettle, Electric Electric Kettle Cordless (with Pouring Spout), Hinged Lid, Detachable From And Can Rotate On Its Corded Base Material: Round Stainless Body, Plastic Handle, Lid And Base Capacity: 1.5 To 2 Liter Automatic Shut - Off, With Power Indicator Light Power Rating: 220//240vac, 50/60hz, 1000 -1600 Watts Base With A 50 Cm (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges; Dti-bps Certified Comes With English Manual That Contains Operation Procedure, Maintenance And Safety Guide. The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item. 28 10 Pieces Laundry Sorter 19 3 - Bag Laundry Sorter, With Wheels 20 Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook 21 Bag Dimensions: Rectangular 22 X 15 X 8 Inch (minimum) Frame Material: Corrosion Resistant Steel, Sturdy No Wobble 22 Frame Overall Dimensions: Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) 23 Smooth Surface, No Sharp Edges 29 4 Pieces Light, Emergency Emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector Power Rating: 220 -240 Vac , 50/60 Hz 20-24 Hours Charge Time Dimensions: Rectangular 27 X 7 X 27 Cm (approx.) Sooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item 30 2 Pieces Mirror Wall Mirror With Frame Flat Glass Mirror, 2 Mm Thick (minimum), Clear With No Distortion Frame: Wood Or Plastic Commercial Finish Rectangular Shape, 3600 Sq.cm (minimum) Includes Mounting Accessories Smooth Surface, No Sharp Edges 31 9 10 Pieces Mop Mop, Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length: 40 (minimum), No Sharp Edges 32 2 Pieces Polisher, Floor, Electric, With Accessories Electric Floor Polisher With Accessories Material: Stainless Steel, Aluminum Alloy Handle: Stainless Tube, Adjustable Height 1 Meter Long (approximate), With Dual Switch Lever Size/capacity :13 Inch (minimum) Diameter Power Supply: 220/240 Vac, 50/60 Hz. Power: 1/3 Hp (minimum) Rotation Speed : 160 Rpm (minimum) Heavy Duty (royal) Power Cord Length : 12 Meters (minimum) With Type A Plug (or Providing 10a Plug Adapter Is An Option) With Pair Of Rubber Wheels, Smooth Surface, No Sharp Edges Comes With Pad Holder, 2 Pcs - Polishing Brush And 3 Pcs - Floor Polishing Pads Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, Brand Name And Electric Rating Permanently Mark On The Item, With 1 Year Warranty Parts And Service The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 33 2 Pieces Shelving Shelving, Open, Knockdown Type, Adjustable Shelves Metal Powder Coated Frame Number Of Shelves : 5 Overall Dimensions : 85 X 30 X 180 Cm(minimum) Sturdy Connection, No Wobble Smooth Surface, No Sharp Edges 34 24 Pieces Sign, Caution Caution Sign, A Shape-2 Panel Self-standing, With D-handle, Collapsible For Easy Storage Material: High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color: Yellow Print Description: "caution: Wet Floor" On One Side "cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100 -120 Mm X 50 -70 Mm, Arial Smooth Surface, No Sharp Edges 35 25 20 Pieces Sponges, Dish 26 Dish Sponge, Cellulose, Non-scratch Dimensions: 5 X 3 X 1 Inch (minimum) 27 Branded 36 28 10 Pieces Spray Gun, Water Barber/salon Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded 37 4 Pieces Squeegee Squeegee, Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges 38 4 Pieces Squeezer, Mop Mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color: Yellow With 3 Inches Non-marking Rubber Casters "caution" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges 39 2 Pieces Step Ladder Material: Aluminum U Channel Capacity: 250 Lbs (minimum) Type: Flatform Type Number Of Step: 6 (including Top Step) Reach Height: 6 To 8 Feet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum) Twin Steps With Gripped Treads To Prevent Slipping Step Braces On Top And Bottom Step Heavy Duty Aluminum Foot Bracket With Slip-resistant Foot Pad With User's Manual In English Which Includes: A. Parts Manual With Labels, Assembly Instructions, Branded 40 2 Pieces Vacuum Cleaner, Dry And Wet Electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material: Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity: 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 41 2 Pieces Washer, Dryer Laundry A. Front Load Electric Washer, Laundry B. Electronic Control, Digital Indicator Display, Transparent Glass Door C. Body Material: Steel, Powder Coated, Any Color D. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) E. Drum Material: Stainless Steel F. Capacity: 8 Kg (minimum) G. Spin Speed: 1200 Rpm (minimum) H. Power Rating: 220 /240vac, 50/60 Hz. I. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) J. Smooth Surface, No Sharp Edges K. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9. Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures L. The Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service M. With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 42 4 Pieces White Board White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) With Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges Front Office Services Nc Ii 1 5 Pieces Calculator Type: Simple Calculator, Nonscientific Body Material: Hard Plastic Minimum Size: 110mm Width X 140mm Long Lcd Display: At Least Font Size Is 8mm X 5mm With Dual Power; Solar Cell And Battery With At Least 8 Digits Display Includes Spare Battery Packed With Protective Carton Box User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C.operating Procedures On How To Use The Equipment 2 2 Pieces Cart, Bell Boy Type: Hotel Luggage Trolley Capacity: At Least 450 Kilograms Minimum Dimensions: Length - 1000mm X Width - 600mm X Height - 1700mm Frame Material: Stainless Steel Tubing Stainless Tube Diameter: At Least 35mm Black Powder Coated Steel Platform With Carpeted Surface And Rubber Bumper At The Edge With 4 Pieces X 200mm Diameter Black Pneumatic Swivel Wheels Packed With Shipping Carton Box Branded 3 1 Piece Cash Register With Drawer Printer: Width: 57mm (minimum) Speed: 2 Lines/sec (minimum) Lcd Display Size: 5cm Width X 10cm Long(minimum) With Drawer At Least 4 Bills And 5 Coins Compartments With Drawer Dimension At Least 410mm Width X 450mm Depth Input Method: Numeric 10-key Interface With At Least 2 Ports Power Source: 220-240volts Ac, 50/60hz; With Ac/dc Adapter Can Be Operated With Battery Programmable User's Manual In English Which Includes: A. Parts Manual With Labels 4 1 Piece Credit Card Imprinter Height Of The Imprinter 2 1/2 Inch (minimum) X Width 5 1/2 Inch (minimum) X Length 11 Inches (minimum) Carriage Material: Steel Body: Plastic Color: Black 20 Characters Per Line Card Mounting Can Accepts At Least 0.030" Thick Size Credit Cards Plate Can Accommodate Up To 5 Lines, Manual Type With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C.operating Procedures 5 1 Piece Credit Card Voucher Holder Material: 3 Mm Thick Clear, Acrylic, Dimensions: Height: At Least 255 Mm, Width: At Least 210 Mm, Thickness: At Least 70 Mm 6 1 Piece Detector, Fake Bills Led Display; Led Display Size: At Least 5 Cm Width X 10 Cm Long; Hard Plastic Casing; Ultraviolet (uv) And Magnetic (mg) Sensors; Power Source: Built In Rechargeable Battery,12v Output And Ac 100- 240v Adapter; With Complete Detection; Accessories Includes: Tough Plastic Carrying Case, Power Cord, Cleaning Brush, And Power Charger; User's Manual In English Which Includes: A. Parts Manual With Labels, B.assembly Instructions 7 1 Piece Guest Folio Rack Material: Hard Plastic; Accommodates At Least 50 Room Divider Indexes; With Divider Boards With Metal Tabs; A4 Size Divider; With Metal Sidings 8 1 Piece Hypercom Memory: 1 Mb Ram (minimum) Lcd Display; 160 X 80 Pixel Graphics (minimum) With Card Reader Magnetic Stripe Pin Pad Port: 4-wire, Rs485; With Peripheral Ports For Pc Connection; Electronic Cash Register Or Journal Printer; With At Least 2400bps Modem; Support Synchronous (sdlc) And Asynchronous, Lan Operation; With Pin Encryption; With Thermal Printer At Least 576 Dots Per Line; Thermal Paper – 2 Inches Wide X 3 Inches Roll Diameter (min.); Keypad: Membrane, 12 Keys, Water-resistant 9 1 Piece Key Card Marker With Verifier Set Of Hotel Door Lock System With Management Software; A) 1 Unit - Card Type Door Lock With Inductive Distance At Least 4cm B) 1 Unit - Card Encoder Unit With 25 Pieces Door Room Key Cards Computer Software System For Door Lock And Making Cards With Complete Accessories Including The Usb Type A Cable Interface To The Computer User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment 10 1 Piece Key Rack Rack Material: Wood Number Of Racks: Can Accommodate At Least 40 Key Cards Minimum Rack Size: 70mm Width X 110mm Height Depth Of The Rack At Least 50mm Any Color Paint Type: Wall Mounted Rack Pack With Shipping Carton Box 11 1 Piece Safety Deposit Box/drop Vault Material: Metal, Powder Coated, Solid Steel Door Thickness: 4mm(minimum) Body Thickness: 2mm(minimum) Minimum Outer Dimension: L: 30cm X H: 20cm X W: 20cm Electronic Lock System Battery Operated Digital Panel: Requires 4 X ‘aa’ Batteries User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Operating Procedures On How To Use The Equipment, Branded 12 4 Pieces Speaker, Lapel Frequency At Least 500mhz With Audio Input Connector With Operation Range At Least 50meters Receiver/70ma Earphone Output Level: 32ohm, 65mw Operates With Energizer Battery With Minimum Power Consumption Of Transmitter At Least 3v/70ma Receiver: 3v/70ma Wellness Massage Nc Ii 1 1 Piece Dummy, Anatomical 1. Half Life-size Muscular Figure Measures 32" Tall (minimum). 2. This Model Features 27 Removable Parts That Are Held On By Metal Screws, Posts, And Hooks. 3. It Shows The Muscular System With Numbered Parts That Comes With A Corresponding Key. 4. It Has Removable Arms, A Removable Calvarium, And A Removable Chest Plate That Hides The Individual Numbered Organs Of The Digestive System 5. Detachable Muscles Include: Deltoid, Brachioradialis With Extensor Carpi Radialis Longus And Brevis, Biceps Brachii, Pronator Teres With Palmaris Longus And Flexor Carpi Radialis, Sartorius Muscle, Rectus Femoris, Extensor Digitorum Longus, Tensor Fasciae Latae, Gluteus Maximus, Biceps Femoris, Semitendinosus, Gastrocnemius, Soleus. 6. Removable Organs Include: Brain (2parts), Lungs (2 Parts), Heart (2 Parts, Liver, Intestines, Stomach 7. Base Is 13" X 9" (removable) 8. Weighs 12 Lbs. (approximately) 9. Plastic Material 10. Non-toxic Material 11. Carton Box Packaging 2 5 Pieces Massage Bed/table Materials: Hard Wood With Steel Bracings, Hardwood Frame, Marine Plywood Deck; Color: Black Dimensions: W:75 Cm X L:183 Cm X H: (adjustable) Height: Adjustable From 24 In. - 33in. Leg Thickness - 35mm (minimum) Cushion System: High Density Foam (7.5 Cm / 2.95") Minimum With Pu Leather Cover (1mm Thick) Finishing: Round Corner Weight Capacity: 250 Kg(minimum) Gross Weight: 21 Kg (approximate) 2 End Support Bearer To Strengthen The Base And Increase Weight Capacity Accessories - Aluminum Headrest (adjustable) + Face Plug + Armrest + Arm Sling + Carry Case Portable And Foldable 3 1 Piece Massage Chair 1. Padded With 3" Thick, High-density, Small-cell Foam 2. Size: 14"-diameter Seat (minimum) But Without Back And Arm Rest, With Metal Post And Hard Plastic Star. 3. Pneumatic Spring Will Effortlessly Adjust The Height From 18" To 24" With The Pull Of A Lever 4. Five Heavy-duty, Smooth-rolling Wheels 5. Load Capacity: 265 Lbs / 120 Kg (maximum) 6. Smooth Surface And No Sharp Edges Any Color With One Color Only For Whole Lot 4 5 Pieces Sphygmomanometer Aneroid Type; (for Adult Use) Large Cuff Sizes: 33 To 42 Cm Arm Diameters Accuracy: ±3mm Hg; Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Index And Range Markings On The Dial For Clear Readings Nylon Cuff Is Durable And Stain Resistant With A Velcro Closure Inflation System Is Latex Free And Has An Easy-release Deflation Valve Chrome-plated Brass Air Release Valve; Set Includes: 1 Unit Sphygmomanometer; 1 Zippered Nylon Carrying Case Smooth Surface And Edges, Nontoxic Material 5 5 Pieces Stethoscope Chest-piece Description: Stainless Steel Double Chest Piece Color: Black Tubing Description: Y-tube Pvc Uses Extra Soft Replaceable And Pivotable Ear Tips The Binaural Is Chromium-plated Chest-piece Diameter: 44 Mm (minimum) And Has Non-chill Rim Overall Length: 29" /74 Cm (minimum) The Stethoscope Is Latex-free Comes With A Pair Of Replacement Ear Tips, A Replacement Membrane, And A Name Plate Smooth Surface And No Sharp Edges 6 1 Piece Talking Sphygmomanometer Type: Arm Type Blood Pressure Monitor (talking English), Nylon Cuff Sizes: 33 To 42 Cm Arm Dia. Lcd Digital Display: Systolic, Diastolic, Pulse Rate With Real Voice, Loud And Clear, Announcing Blood Pressure Automatically When Reading Is Detected And Displayed Simultaneously Dimensions: 98mm*126mm*60mm (approximate) Hard Plastic Casing, Smooth Surface And No Sharp Edges, Nontoxic Materials Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Weight: 450g (approximate) Pressure Measurement Range: 20~280mmhg(0.4kpa-37.3kpa) Pressure Accuracy: ±3mmhg(±0.4kpa) Pulse Measurement Range: 40 ~199 Beats /min Voltage: 4*aaa Alkaline Batteries Or Power Adapter Certificate: Ce Rohs Intelligent Automatic Pressurization And Decompression Incorrect Prompting Function Automatic Shutdown: 1 Min After Last Operation Carton Box Packaging 7 1 Piece Talking Thermometer Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, Lr41 Alkaline-magnesium Button Battery Real Voice (loud And Clear In English) Announces Temperature Automatically When Reading Is Detected Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Dimension Approx.: 2.0 (w) X 4.4 (h) X 1.2 (d) Inches (not Including Probe) / 51 (w) X 110 (h) X 30 (d) Mms (not Including Probe) Choices In Degrees Celsius Or Fahrenheit Talk Button Repeats Last Temperature Reading Last Reading Memory Auto Switch Off Accessories: Protective Case, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 8 5 Pieces Thermometer, Digital Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, 1 Lr41 Alkaline-magnesium Button Battery When Measured At A Standard Room Temperature Of 23 Deg C (73.4 Deg F) In A Test Tank Held At Constant Temperature Power Consumption: 0.1mw Low Battery Indication: Battery Symbol Displayed Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Memory: Last Measuring Reading Beeper Function: 1 Beep When Power On 3 Beeps After Measurement Completed External Size (mm): 19.4(w) × 132.5 (l) × 10.0(d) Accessories: Protective Case, Test Battery, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 9 1 Piece White Board White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) With Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges 1. The Delivery For This Project Shall Be Door-to-door From Sdo Direct To The Recipient Schools. 2. The Supplier Shall Inform The Recipient Schools Three (3) Calendar Days Before The Actual Delivery Date To Ensure The Presence Of The School Inspection And Acceptance Team. 3. The Goods That Will Be Delivered To The Recipient Schools Shall Be Compliant With The Requirements Of The Contract And Have Passed The Inspection And Test. Please Bring Sample Of The Items That Can Be Carried By Hand.

Details: Description 1. The Department Of Education – Division Of Tangub City, Through The General Appropriations Act 2024 Intends To Apply The Sum Of Three Million Nine Hundred Seventy-eight Thousand One Hundred Six Pesos (php 3,978,106.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Procurement Of Learning Tools And Equipment For Technical Vocational Livelihood To Deped-public Schools With Identification Number Tvl - 2024 – Rx – Tangub City – 030. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Quantity Unit Item Description Abc Lot 1. Lorenzo Tan National High School (caregiving Nc Ii)- Php 400,403.00 5 Piece Airpot 1.type: Water Heater 2. Outer Material: Hard Plastic, (pp) Polypropylene, Heat Resistant 3.cavity Material: Stainless Steel 4. Capacity: 2.5 Liters 5.voltage: 220/240/volts 6.ac 50/60 Hz. Power In Watts: 500 To 800 Watts 7.comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide 8. The Item Must Be Branded And Good Quality. 10 Piece Apron 1.type: Bib Apron 2. Material: Polyester-cotton Fabric 3.length: 20 To 40 Inches (minimum) 4. With 2 To 3 Bottom Pockets; 5.color: Any 6.the Item Must Be Of Good Quality 2 Piece Bath Tub, Baby 1. Material: Hard/sturdy Plastic, (pp) Polypropylene 2. Color: Any 3.dimension: (l X W X H) 670 To 700 Mm X 400 To 420 Mm X 160 To 190 Mm (minimum) 4. Thickness: 3 Mm To 6 Mm (minimum) 5.color: The Item Must Be Of Good Quality 10 Piece Baby Blanket 1. Type: Blanket 2. Material: 100% Cotton 3.color: White 4. Dimension: (l Xw) 38 To 42 Inches X 28 To 32 Inches (minimum) 5. Washable 6. The Item Must Be Of Good Quality 20 Piece Basin (small) 1.material: Hard Plastic, (pp) Polypropylene 2. Color: Any 3.dimension: 280 - 320 Mm Diameter X 80 - 120 Mm Higher (mimimum) 4. Thickness: 2 Mm To 4 Mm (minimum) 5. The Item Must Be Of Good Quality 20 Piece Bath-towel, Towellete 1. Type: Bath Towel 2. Material: 100% Cotton 3.color: White 4. Dimension: ( L X W ) 120 - 125 Cm X 60 - 65 Cm (minimum) 5.washable 6.the Item Must Be Of Good Quality 5 Piece Bedpan 1.material: Hard Plastic, (ps) Polystyrene 2. Color: Any Color 3.dimension: ( L X W X H) 22 - 26 Cm X 27 - 32 Cm X 7 - 12 Cm (minimum) Approximate 4. Capacity: 1 Liter (minimum) 5.thickness: 2 To 5 Mm 6.saddle-shaped And Lightweight 7. The Item Must Be Of Good Quality 10 Piece Blanket 1. Type: Blanket 2. Material: Cotton 3.color: White 4. Dimension: (l X W) 80 - 90 Inches X 54 -64 Inches Approximate 5. Washable 6. The Item Must Be Of Good Quality 3 Piece Bottle Sterilizer, Electric 1. Type: Electric Steam Sterilizer 2. Material: Hard Plastic (p E) Polyethylene Or Its Equavalent 3.color: Any Color 4. Capacity: 6 Bottles (minimum) 5.sterilizes Bottle And Accessories By Steam 6. With Automatic Power Shut-off Function 7. Dimensions: 8. Power Supply: 220 V-240v Ac, 50/60 Hz. 9. The Item Must Be Of Good Quality 5 Piece Bread Toaster 1. Type: Electric Bread Toaster 2. Dimensions ( W X D X H): 25 - 30 Cm X 15 -20 Cm X 18 - 22 Cm (minimum) Approximate 3. Capacity: 2 Slices 4. Power Supply: 220v-240v Ac, 50/60 Hz. 5. 400 To 600 W (minimum) 6. The Item Must Be Of Good Quality 10 Piece Burping Cloth 1. Type: Burping Cloth 2. Material: 100% Cotton 3. Color: Any Color 4. Dimension: Length: 17 -19 Cm Width: 14 -16 Cm (minimum) 5.washable 6. The Item Must Be Of Good Quality 10 Piece Cane 1.type: Adjustable Offset-walking Cane 2. Material: Aluminum 3.tip Size: 18 4. Height Adjustment: 31 Inches To 39 Inches (with 1 Inch. Increment) 5.weight Capacity: 200 - 250 Lbs. (minimum) 6.with Rubber Handle; With Push-botton Height Adjustment 7. The Item Must Be Of Good Quality 5 Piece Carpet 4ft. X 8 Ft 1.material: Polyster 2. Color: Any Patterned Color 3.dimension:48 Inches X 96 Inches (minimum) 4.the Item Must Be Of Good Quality 5 Set China Ware 1.material: Porcelain 2. Fit To Be Used In Ovens And Microwaves 3.specific Dimensions: Dinner Plate Diameter: 10 Inches (minimum) 4. Salad Plate Diameter: 7 Inches (minimum) 5.bowl Diameter: 5 Inches (minimum) 6.mug: 12 Oz. (minimum) 7. The Item Must Be Of Good Quality 8. Set Includes: 1 Piece Dinner Plate, 1 Set Salad Plate, 1 Piece Bowl, 1 Piece Mug 10 Piece Clothes Brush 1. Type: Rectangular Clothes Brush 2. Handle Material: Wood 3. Bristle Material: Plastic Bristle 4. Color: Any Color 5.overall Dimension: ( L X W X H) 140 -160 Mm X 45- 60 Mm X 20 -30 Mm (minimum) 6. The Item Must Be Of Good Quality 10 Piece Clothes Hamper 1. Type: Square Hamper 2. Material: Polyester 3. Color: Any Color 5. Dimension: ( L X W X H) 32 To 34 Cm X 36 To 38 Cm X 56 To 58 Cm (minimum) 5. The Item Must Be Of Good Quality 2 Piece Clothes Rack 1.type: Single-pole Clothes Rack 2. Material: Stainless Steel 3. Dimension: ( L X W X H) 30 To 32 Inches X 14 To 38 Inches X 62 To 64 Inches (minimum) 4. Comes With 4 Caster Wheels 5. The Item Must Be Of Good Quality 3 Piece Comforter 1.type:comforter 2. Material: Polyester 3.color: Any Color 4. Dimension: ( L X W) 84 To 88 Inches X 62 To 65 Inches (minimum) 5.thickness: 20-30 Mm (minimum) 6.washable 7. The Item Must Be Of Good Quality 3 Piece Commode 1.type: Foldable Commode 2. Durable Plastic Snap- On Seat And Lid Withouot Pushing Buttons 3. Blue Powder-coated Steel-welded Construction 4. Plastic Arms For Added Comfort 5.comes Complete With 12 Qt. Commode Bucket With Carry Handle, Cover And Splash Shield 6. Specifications: Width 18 Inches Between Arms/ 22.5 Inches Outside Approximate 7. Set Dimensions: W 32 -36 Cm X D 35 -40 Cm, Height 38 -54 Cm Approximate 8. Weight 13 Lbs., Weitgh Limit 350 Lbs. 9. The Item Must Be Of Good Quality 5 Set Cooking Utensils 1. Material: Stainless Steel 2. The Set Is Comprised Of Ff:; 1 Pc. -16 X 9.5 Cm Sauce Pan With Glass Lid (minimum) 3. 1 Pc. - 16 X 95 Cm Casserole With One Glass Lid, (minimum) 4. 1 Pc. - 18 X 10.5 Cm Casserole With Glass Lid, (minimum) 5.1 Pc. - 20 X 11. 5 Cm Casserole With Glass Lid, (minimum) 6. The Item Must Be Of Good Quality 2 Piece Crutches, Adjustable 1.type: Adjustable Crutches 2. Set Includes: 3 Pcs./set 3.material: Aluminum Powder-coated 4. Color: Any Color 5.weight Capacity: 300 Lbs. (minimum) 6. Dimensions: Youth Size 7. User Heights: 4 Ft. 6 Inches To 5 Ft. 2 Inches 8. Underarm Height: 37 Inches To 46 Inches 9. Adult Size: User Heights: 5 Ft. 2 Inches To Ft. 10 Inches 10. Underam Heights: 45 Inches To 53 Inches 11. Tall Adult Size: User Heights: 5 To 10 Inches 12. Underam Height: 53 Inches To 61 Inches 13. The Item Must Be Of Good Quality 10 Piece Cutlery 1.material: Stainless Steel 2. 20 Pieces Set For 4 3. 4 Dinner Knives 4. 4 Dinner Forks 5. 4 Dinner Spoons 6. 4 Salad Forks 7. 4 Tea Spoons 8. The Item Must Be Of Good Quality 10 Piece Cutting Board, Plastic 1. Material: Polyethylene Plastic 2. Color: Any Color 3. Dimension: ( L X W X H) 240 - 260 Mm X 140 - 160 Mm X 10 - 15 Mm (minimum) 4. Reversible Cutting Surface 5. The Item Must Be Of Good Quality 10 Piece Digital Thermometer, 32 C-42.9 C (90.0f-109.9f 1. Case Material: Hard Plastic (pe) Polyethylene 2. Color: Any Color 3. Range: 32 C - 42.9 C (90.0f-109.9f) 4. Accuracy: + 0.1c 35.5c-42.0c(+ 0.2 F 95.9f-107.6f) 5. Battery Operated 6.memory: Last Measuring Reading 7.alarm: Approx. 10 Seconds Sound Signal When Peak Temperature Reached. 8. The Item Must Be Of Good Quality 2 Piece Dressing Trolley 1.material: Shelves: Powder-coated Steel Sheet 2. Dimensions: ( W X D X H) 48 - 50 Cm X 48 - 50 Cm X 83 - 85 Cm (minimum) 3.number Of Shelves: 2 4. With Four Revolving Castors, Two Lockable 5. The Item Must Be Of Good Quality 10 Piece Electric Knife 1. Type: Electric Knife 2. Material: Stainless Steel And Hard Plastic, (pe) Polyethylene 3. Power Supply: 220/240 Volts, Ac 50/60 Hz. 4. Dimensions: 4.25 X 2.75 X 11.88 Inches (minimum) 5.comes With Touch Button Control, Safety Lock And English User & 39;s Manual 6. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, 7. The Item Must Be Of Good Quality 10 Piece Face Towel/towellete 1. Type: Face Towel 2. Material: 100% Cotton 3. Color: White 4. Dimension: ( L X W ) 28- 32 Cm X 28 -32 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Feeding Bottle Brush 1. Bristle Material: Nylon 2. Color: Any Color 3. Handle Material: Hard Plastic, (ps) Polystyrene 4. Total Length: 280 -320 Mm (minimum) 5. Fit With The Standard Feeding Bottle For The Baby 6.comes With Nipple Brush 7. Washable 8. The Item Must Be Of Good Quality 5 Set Feeding Utensils (child) 1.material: Hard Plastic, (ps) Polystyrene 2. Sets Includes: 6 Pcs./set 3. 1 Pc Knife 4. 1 Pc- Plate 5. 1 Pc. -bowl 6. 1 Pc. - Cup 7. 1 Pc. -fork 8.1 Pc. - Spoon 9. Color: Any 10. The Item Must Be Of Good Quality 7 Set First Aid Kit Type: Emergency Case; Contents: First Aid Quick Reference Guide, 1 Pc; Sterize Gauge Swab (4x 4 X 12 Ply) 100 Pcs/pack, 1 Pack; Adhesive Strips/band-aid, 50 Pcs/pack, 2 Packs; Gloves, Disposable, Medium Size, 2 Pairs; Hypo Allergenic Adhesive Tape, 5 Cm X 5 Cm, 2 Rolls; Triangular Bandage/arm Sling, Min 90 Cm X 90 Cm X 120 Cm, 2 Pcs; Safety Pins, 1 1/4 Inches, (12 Pcs), 1 3/4 Inches (12 Pcs); Stainless Steel Bandage Scissors, 2 Pcs; Betadine, 60ml, 2 -3 Years Expiration, 2 Bottles; Dust Mask, 2 Pcs; Hand Towels Or Face Towels, White Color, 6 Pcs; Gauze Bandage, Minimum 5 Cm X 4cm, 2 Rolls; Antiseptic Handwash/germicidal Soap, 60 Gms, 2 Pcs; Torniquet, 2 Pcs; Spirit Of Ammonia, 30ml, 2-3 Years Expiration, 1 Bottle; Burn Cream Ointment, 20g To 30g, 2-3 Years Expiration, 1 Tube; Medical Tweezers Min. 8 Cm, Plastic, 2 Pcs; Plastic Bags, Resealable, Minimum Of 24 Pcs, 100mm X 180mm, 24 Pcs, 150mm X 230mm; Cotton Balls, 50 Balls In A Sealed Package, 2 Packs; Hot And Cold Pack, Reusable, 1 Pack; Water Resistant And Sturdy Case W/ Handle That Can Accomodate All The Listed Items. 20 Piece Flat Sheet 1.type:bed Sheet 2. Material: 100% Cotton 3. Color: White 4. Dimension: Width - 137 - 145 Cm Length - 180 -200 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Garbage Bin Type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: 4 Gallons ( Minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With Packing Case Color: Any Color Smooth And No Rough Surfaces 20 Box Gloves, Rubber (15 Mils) Medium Size (#8) Super Nitrile, Flocklined Interior (acid/solvent Resistant) Individually Packed For Hand Protection 10 Box Gloves, Surgical (disposable) 1.material: Latex 2. Color: White 3. Thickness: .09 Mm (minimum) 4. Disposable And Sterile 5. The Item Must Be Of Good Quality 20 Piece Gown (hospital) 1.type:unisex Hospital Gown 2. Material: Polyester- Cotton 3. Color: Any Color 4. Size: One Size Fits All 5. Comes With Overlap Back Closure 6. The Item Must Be Of Good Quality 5 Set Grooming Kit (hairbrush Comb, Nail Cutter, Nail Brush) 1. Set Includes: 6 Pcs./ Set (minimum) 2. Materials: Stainless Steel And Hard Plastic 3. 2 Nail Clippers/ Trimmers Of Different Sizes 4.1 Multipurpose Scissors 5. 1 Ear Pick 6. 1 Tweezer 7. 1 Comb 8. The Item Must Be Of Good Quality 10 Piece Hand Towel 1. Type: Hand Towel 2. Material: 100% Cotton 3. Color: Any Color 4. Dimension: ( L X W) 65 -75 Cm X 32 -42 Cm (minimum) 5. Washable 6. The Item Must Be Of Good Quality 3 Piece High Chair/booster Seat/ Portable Seat 1. Material: Foldable Powder Coated Steel Frame Or Its Equavalent 2. Phone Type: Corded 3. Polyester Harness, Seat/back Cushion 4. Overall Dimensions: ( L X W) 65 -75 Cm X 50 -60 Cm X 90 - 102 Cm (minimum) 5. Capacity: 40 Lbs. (minimum) 6. With 3-position Seat Recline 7. The Item Must Be Of Good Quality 10 Piece Hot Water Bag 1. Material: Rubber Or Its Equavalent 2. Color: Any Color 3. Overall Dimension: (lxw) 200- 300 Mm X 150 -200 Mm (minimum) 4. Leak-proof And Washable 5. The Item Must Be Of Good Quality 10 Piece Kettle 1. Material: Heat-resistant Hard Plastic 2. Capacity: 1- 1.5 Liters (minimum) 3. Height: 25-35 Cm (minimum) Approx 4. Voltage: 220/240 Volts, Ac 50/60 Hz 5. Power In Watts: 1000 To 1500 Watts 6.comes With Automatic Shut-off Feature And Permanent Water Level Indicator 7. Pitcher-type With Pouring. 8. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, 9. The Item Must Be Of Good Quality 10 Set Measuring Cups .. 1/4, 13, 1/2 1 Cup Set 1. Materials: Stainless Steel 2. Set Includes: 4 Pcs./set; 3. 1 Pc. - 1/4 Cup (60 Ml) 4. 1 Pc- -1/3 Cup (80ml) 5. 1 Pc.- 1/2 Cup (125 Ml) 6. 1 Pc. - 1 Cup ( 250 Ml) 7. Thickness: .5 Mm To 1 Mm (minimum) 8. The Item Must Be Of Good Quality 10 Piece Medical Tray 1. Type: Tray 2. Material: Stainless Steel 3. Overall Dimension: (lxw X D) 300- 350 Mm X 200 -250 Mm X 12 - 19 Mm (minimum) 4. Thickness: .7 To 1 Mm (minimum) 5. The Item Must Be Of Good Quality 2 Set Mixing Bowl, Stainless, 6-piece Set 1. Material: Stainless Steel 2. Quantity Of Set: 6 Pcs./set 3. Dimension: 3/4 Qt., 1.5 Qt., 3 Qt., 4 Qt., 5 Qt., 8 Qt., 4. The Item Must Be Of Good Quality 10 Piece Pail, Plastic, 10 Liters 1. Material: Polyethylene Plastic 2. Dimension: 25-30 Cm Diameter X 23-27 Cm Depth (minimum) 3. Color: Any Color 4. Chromed Finished Handle 5. Capacity: 10 Liters (minimum) 6. Material Must Be Non-toxic 7. The Item Must Be Of Good Quality 10 Piece Pans 1. Type: Frying Pan 2. Material: Stainless Steel 3. Handle: With Hard Plastic Heat Insulation 4. Tempered Glass Lid With Steam Hole 5. Size 23 -26 Cm With Lid 6. The Item Must Be Of Good Quality 10 Piece Peeler 1. Type: Peeler 2. Blade Material: Stainless Steel 3. Handle Material: Stainless Steel 4. Overall Dimensions: 18 X 8 Cm (minimum) 5. Comes With Self-locking 6. The Item Must Be Of Good Quality 10 Piece Pick Up Forcep 1. Type: Curved Forceps 2. Material: Stainless Steel 3. Overall Length: 100-130 Mm (minimum) 4. Comes With Self-locking 5. The Item Must Be Of Good Quality 10 Piece Pillow 1. Material: Cotton 2. Color: Any Color 3. Dimensions: ( L X W) 50 - 56 Cm X 75 - 180 Cm (minimum) 4. With 4 Inches Hems 5. Washable 6. The Item Must Be Of Good Quality 20 Piece Pillow Case 1. Material: Cotton 2. Color: Any Color 3. Dimensions: ( L X W) 50 - 56 Cm X 75 - 180 Cm (minimum) 4. With 4 Inches Hems 5. Washable 6. The Item Must Be Of Good Quality 10 Piece Portable Mixer 1. Type: Portable Mixer 2. Material: Stainless Steel, Clear Acrylic 3. Capacity: 16-18 Oz. (minimum) 4. Size: 170 - 220 Mm X 75- 100 Mm 5. Requires 2 Aaa Batteries 6. Power In Watts: 250 To 300 Watts 7. The Item Must Be Of Good Quality 10 Piece Potato Masher 1. Type: Portable Masher 2. Material: Stainless Steel And Hard Plastic 3. Mesh Head Diameter: 70-90 Mm (minimum) 4. Overall Length: 250 - 270 Mm (minimum) 5. Handle Length: 120-140 Mm (minimum) 6. Washable 7. The Item Must Be Of Good Quality 5 Set Pots 1. Type: Cooking Pot 2. Material: Stainless Steel 3. Set Includes: 4 Pcs./set 4. 1 X Pot With Lid 5. 1 X Pan With Lid 6. 1 X Strainer 7. 1 X Egg Streamer 8. Size: (l X W X H) 40 To 42 Cm X 12 To 14 Cm X 26 To 28 Cm 9. The Item Must Be Of Good Quality 5 Piece Skillet 1. The Item Shall Have The Following Specifications. Material Including Handle: Cast Iron 2. Color: Any Color 3. Dimension ( Dia. X Depth): 250 - 320 Mm X 50 - 70 Mm (minimum) 4. Handle Casted With The Body And Having Plastic Or Rubber Heat Insulator 5. Body Thickness: 1.5 - 3 Mm (minimum) 6. Washable 7. The Item Must Be Branded And Have Good Quality. 5 Piece Sphygmomanometer 1. Type: Aneroid 2. Material: Nylon Cuff And Inflation Bag, Die - Cast Zinc Manometer 3. Package Inlcluded: 1 X Aneroid Sphygmomanometer. 4. Size: ( L X W X H Cm) = 18 To 20 Cm X 11 To 13 Cm X 11 13 Cm 5. Nylon Zippered Carrying Case 6. Capacity: 0 To 300 Mm Hg 7. The Item Must Have Good Quality. 5 Piece Stethoscope 1. Type: Dual Head Stethoscope 2. Material: Stainless Steel Chestpiece And Eartubes 3. Reinforced Pvc Tubing 4. Soft Pvc Eartips 5. Color: Any Color 6. Bell Diameter: 18-25 Mm Approx. 7. Diaphragm Diameter: 25-50 Mm Approx. 8. Overall Length: 66-75 Cm (minimum) 9. The Item Must Be Of Good Quality 5 Piece Urinal 1. Type: Unisex Portable Urinal 2. Material: Hard Plastic, (pp) Polypropylene 3. Color: Any Color 4. Total Capacity: 28 Oz. Minimum 5. Dimension: ( L X W X H) 270 To 290 Mm X 145 To 160 Mm X 70 To 80 Mm ( Minimum) 6. Thickness: 1 Mm To 3 Mm (minimum) 7. The Item Must Have Good Quality. 5 Piece Vacuum Cleaner 1. Material: Plastic (pp) Polypropylene Or Its Equavalent 2. Color: Any Color 3. Suction Power: 18 To 22 Kpa (minimum) 4. Tank Capacity: 24 Liters (minimum) 5. Vacuum Hose Length: 6 To 8 Ft. (minimum) 6. Power Supply: 220 V - 240 Ac , 50/60 Hz. 7. With Accesories: Extension Wand, Utility Nozzle, Standard Paper Filter 8. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide 9. The Item Must Be Branded And Good Quality 3 Piece Wheel Chair 1. Type: Foldable Wheel Chair 2. Overall Dimensions: ( L X W X H) 40 - 44 Inches X 26 - 30 Inches X 34 - 38 Inches ( Minimum) 3. Folded Dimensions: ( L X W X H ) 40 To 44 Inches X 10 To 14 Inches X 34 To 38 Inches (minimum) 4. Capacity: 350 Lbs. (minimum) 5. With Padded Arm Rests; With Push-to-lock Wheel Brakes 6. The Item Must Be Of Good Quality Lot 2. Sta. Maria National High School (hairdressing Nc Ii)- Php 323,170.00 5 Pcs. Bowl, Mixing, Plastic With 10.5 Cm X 6cm 2 Pcs. Bowl, Shampoo, Stainless Steel Frame, Bowl Dimensions: 19 Inch X 20 Inch X 10 Inch With Hose Attachment Of 7 Ft. 5 Box Box, Hairpin, Metal With 3.5 X 4.5 X 0.5 Inches(100 Pcs Per Box) 5 Pcs. Brush, Applicator, Plastic With 70mm X 80mm 5 Pcs. Brush, Hair, Plastic Bristle And Wooden Handle, Width - 2 Inches 10 Pcs. Cap, Frosting, With Hook, Silicone With 31cm X 22cm,rounded Metal Hook 10 Pcs. Cap, Heating, Waterproof, Cordless With 21-24 Inches 10 Pcs. Cape, Polyester With 125 Cm X 140 Cm 5 Pcs. Chair,high, Metal Painted With Anti Rust With 15 Inches X 33 Inches, Synthetic Leather Seat 5 Pcs. Chair, Hydraulic, Metal Base With 59 Cm X 54 Cm X 51-78cm, 180kg, 360' Rotation 10 Pcs. Clamp, Plastic, Length:9.5cm, Thickness:10mm 10 Pcs. Clamp, Duck Bill, Metal, Length: 11 Cm, Elasticity Stainless Steel Spring 5 Pcs. Clipper, Hair, Body Material: Hard Plastic, Blade Material: Carbon Steel, 6 Watts 10 Pcs. Comb, Afro, Plastic, Length: 7 Inches, Width: 3.25 Inches, Number Of Teeth: 12 Teeth, Teeth Height: 2.5 Inches 10 Pcs. Comb, All Purpose, Plastic, 18 Cm Long , Has Both Fine And Medium Teeth Position On One Side Only, Height Of The Teeth: 2 Cm 10 Pcs. Comb, Haircutting, Hard Plastic, Length Including The Handle:180mm, Width: 30mm With Detachable Steel Blades And Blade Holder 10 Pcs. Comb, Large Toothed, Plastic, Size:15 Cm, Number Of Teeth: 10 Teeth, Gap Between Comb's Teeth: 0.4 To 0.5 Cm , Teeth Size: 0.3 Cm X 4cm 10 Pcs. Comb, Tail, Plastic, Size : 8 Inches X 1 Inches, Tail Length: 4 Inches Tooth Length: 3/4 Inch 10 Pcs. Comb, Teasing, Plastic,1st Row: Large Teeth 25 Mm Long, 2nd Row: Small Teeth 19 Mm, Over-all Size: 20cm X 3.8 Cm 5 Pcs. Comb, Wide Tooth, Plastic, Size:15 Cm, Number Of Teeth:10 Teeth, Gap Between Comb's Teeth:0.4 To 0.5 Cm, Teeth Size: 0.3cm X 4cm 8 Pcs. Crimpers, 25 Watts, Size:38 Cm X 15.5 Cm X 9 Cm, Maximum Temp.: 200 Degrees Centigrade, Rated Voltage:10 -230volts Ac 5 Pcs. Curling Iron, Ceramic, 65watts, 210-240volts Ac, Barrel Size: 1 Inch, Adjustable Heat Setting Of 200 Degrees Centigrade, Swivel Cord Up To 360 Degree 5 Pcs. Drip Pan, Hard Plastic, Size:17.5 X 25.8 X 1 Inches, Thickness: 1/8 Inch, Shallow Rectangular Type 5 Pcs. Dryer, Hair, 1000w, Rated Voltage: 220vac, 18.5cm X 16cm X 6.5cm With Plastic Handle Design 10 Box Gloves, Disposable, Size: 25cm X 23cm, 100 Pcs Per Box 5 Pouch Gloves, Rubber, Medium, Thickness: 4 Mil, Acid Resistant 5 Pouch Gown, Smock, Polyester, Sizes: Small (50inches X 56inches);medium (52inches X 58inches); Large (54 Inches X 60inches) 10 Pouch Hairclips, Metal, Size:67mm X 19mm 10 Pack Hairnet, Invisible, Nylon, Size: 55mm, Stretchable, Color: Black 10 Pc Headband, 6 Inches, Woven Crochet Tube 10 Pc Headband, Flannel, Cloth, Size : 45 Cm, Width: 8 Cm 6 Pc Infrared Iron, Ionic Ceramic Tourmaline-infused Plates And Abs Plastic Body, Power: 70 Watts, Power Rating: 220-240 Volts Ac; Over-all Size: 24 Cm, Heating Plate 50 Mm, Heating Time: Within 30 Seconds;variable Heat Settings: From 250 To 450 Degrees Fahrenheit 10 Pc Mirror, Hand, Plastic, Size 15 Cm Diameter, Frame Thickness: 6.5mm, Over-all Length With The Handle: 20 Cm 3 Pc Mirror, Modular, Plain Mirror, Mirror Material: Glass, Frame Material: Aluminum (cut To Fit), Dimensions: 75 Cm X 65 Cm, Mirror Thickness: 6mm 10 Pc Prong Clip, Double, Steel, Size: 45 Mm 10 Pc Prong Clip, Single,steel, Size: 55 Mm 10 Pc Razor, Straight, High Carbon Steel, Foldable Straight Razor, Replaceable Blade; Dimensions: 14 Cm X 2 Cm When Folded; Double-edged Razor Blades 3 Dz Roller Pins, Metal, Size: 60mm Long, Quantity By Dozen(12 Pieces) 10 Pc Rollers, Jumbo, Plastic 44mm In Diameter X 64mm 10 Pc Rollers, Large Sized, Plastic, Size: 40mm Diameter X 60mm Long 10 Pc Rollers, Medium Sized, Plastic; Diameter: 38 Mm ,length: 58mm 4 Pc Scissor, Cutting, Stainless Steel,length: 17cm,blade Width 10 Cm 4 Pc Scissor, Thinning, High Carbon Steel, Blade Length 6cm, Style: Right Handed Scissor, Length: 17cm 5 Pc Scoop, Plastic, Capacity:1/2 Cup, Rounded Edges With Handle Thickness: 1.5 Mm 5 Pc Shower Cap, Plastic, Size: One Size Fits All Or 30cm 5 Pc Spatula, Plastic, Dimension: 7.5 Cm X 1.5 Cm 5 Pc Spray Gun, Transparent Plastic, Capacity: 300ml, Dimension: Bottom Is 7 Cm And The Height Is 17cm 3 Pc Steamer, Hair, 450 Watts, 220 Volts/50-60hz, Hood Material: Polycarbonate, Hood 30 Cm Diameter Opening X 25 Cm, Timer Setting Is Up To 60 Minutes, 32 Ounce Water Reservoir, Adjustable Height 100- 150cm 30 Pcs. Stool, Metal, Electroplated, Load Capacity: 150kg, Design: Swivel Stool With Backrest With Hydraulic Lift To Adjust Height Freely Lot 3. Sta. Maria National High School (wellness Massage Nc Ii)-php 198,338.00 5 Pcs. Dummy, Anatomical, Plastic, 32" Tall, 27 Removable Parts That Are Held On By Metal Screws, Posts, And Hooks, Brain (2parts), Lungs (2 Parts), Heart (2 Parts, Liver, Intestines, Stomach, Base Is 13" X 9" (removable), Weighs 12 Lbs. 5 Pcs. Massage Bed/table, Hard Wood With Steel Bracings, Hardwood Frame, Marine, Plywood Deck; Color: Black, Dimensions: W:75 Cm X L:183 Cm X H: (adjustable) Height: Adjustable From 24 In. - 33in., Leg Thickness - 35mm, Cushion System: High Density Foam (7.5 Cm / 2.95") With Pu Leather Cover (1mm Thick), Weight Capacity: 250 Kg(minimum), Gross Weight: 21 Kg 2 Pcs. Massage Chair, Padded With 3" Thick, High-density, Small-cell Foam, Size: 14"-diameter Seat But Without Back And Arm Rest, With Metal Post And Hard Plastic Star, Pneumatic Spring Will Effortlessly Adjust The Height From 18" To 24" With The Pull Of A Lever, Five Heavy-duty, Smooth-rolling Wheels, Load Capacity: 265 Lbs / 120 Kg (maximum), Smooth Surface And No Sharp Edges 6 Pcs. Sphygmomanometer, 33 To 42 Cm Arm Diameters, Accuracy: ±3mm Hg;measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Index And Range Markings On The Dial For Clear Readings, Nylon Cuff Is Durable And Stain Resistant With A Velcro Closure 6 Pcs. Stethoscope, Stainless Steel Double Chest Piece, Color: Black, Tubing Description: Y-tube Pvc, Uses Extra Soft Replaceable And Pivotable Ear Tips, The Binaural Is Chromium-plated, Chest-piece Diameter: 44 Mm And Non-chill Rim, Overall Length: 29" /74 Cm 6 Pcs. Talking Sphygmomanometer, Nylon Cuff Sizes: 33 To 42 Cm Arm Dia, Dimensions: 98mm*126mm*60mm, Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg, Weight: 450g , Range: 20~280mmhg(0.4kpa-37.3kpa), Pressure Accuracy: ±3mmhg(±0.4kpa), Pulse Measurement Range: 40 ~199 Beats /min, Voltage: 4*aaa Alkaline Batteries 25 Pcs. Talking Thermometer, Hard Plastic, Sensing Unit: Thermistor, Measurement Range: 32 C - 42 C (89.6f-107.6f), Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f), Power Supply: 1.5v Dc, Lr41 Alkaline-magnesium Button Battery Real Voice, Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment, Dimension Approx.: 2.0 (w) X 4.4 (h) X 1.2 (d) Inches / 51 (w) X 110 (h) X 30 (d) Mms 26 Pcs. Thermometer, Digital, Hard Plastic, Sensing Unit: Thermistor, Measurement Range: 32 C - 42 C (89.6f-107.6f), Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, 1 Lr41 Alkaline-magnesium Button Battery , Power Consumption: 0.1mw, Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment, External Size (mm): 19.4(w) × 132.5 (l) × 10.0(d) 10 Pcs. White Board, White Formica Laminated, Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm Wih Plastic Corner Caps, The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube , Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels, Height From Floor: 210 To 214cm Lot 4. Sumirap National High School And Tangub City National High School (bpp Nc Ii)-php 519,702.00 10 Set Air Compressor With Airbrush Cake Decorating Set(airbrush Gravity Feed Dual Action Airbrush Compressor Kit 0.2/0.3/0.5mm Needle Air Brush For Cake Decorating Painting. Material: Aluminum + Copper Type: Single Cylinder Piston Compressor Power: 1/5 Hp Plug Type: Eu Voltage: 220-240v/50hz Speed: 1450 Rpm Air Volume Per Minute/liter: 23l/min Maximum Pressure: 7bar (100psi) Working Pressure Of Spray Gun: 15-50psi Low Noise: ≤50db Accessories: Pressure Gauge, Pressure Gauge, Air Filter Automatic Stop, Starts At 2.8 Bar, Stops At 4 Bar (special Pressures Available) Connection: With Connection G 1/8" Bsp Cable: Approx. 1.8m / 6ft) 40 Pc Egg Beater(stainless Steel Semi-automatic Mixer/manual Whisk Egg Beater Kitchen Cooking Tool) 40 Set Board, Chopping ,6 Color( Type: Food Grade Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, Preferably Packed In Set Comes With No Sharp Edges And With Hole For Storage Purposes) 10 Pc Double Boiler (material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Rivetedhandle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges) 80 Set Bowl, Mixing Set Stainless (premium Stainless Steel Mixing Bowls Bowl Sizes Are: 5 Qt, 4 Qt, 3qt, 1.5qt, And ¾ Qt And They Each Fit Perfectly Within One Another) 70 Set Cake Pan, Round, Size: 4''x3'' (non-stick Aluminum Alloy Cake Round Pan) 30 Set Cake Stand, With Tier (type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tier Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3 : 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Assembled Column Is Used For Maximum Strength And Stability Of The Stand Must Be Packed In Set ) 60 Pc Cake Turn Table (type: Turn Table Body Shape : Circular Material: Cast Aluminum Plate.and Cast Iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm Turntable With Ball Bearing To Turn Easier Preferably Packed In Any Kind Of Packaging Comes With No Sharp Edges To Rotate Smoothly In 360 Degrees Clockwise Or Counter Clockwise ) 30 Pc Coupler (type: Foood Grade Body Shape: Tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case The Materials Used Must Be Non-toxic And Dishwasher Safe ) 50 Set Cup, Measuring (stainless Steel Measuring Cup Set For Dry Ingredients. Composed Of 1 Cup, 3/4 Cup, 1/2 Cup, 1/4 Cup, 1/8 Cup) 50 Set Cup, Measuring 250 Ml. For Liquid Glass (250 Ml Heat Resisting Measuring Glass) 40 Set Cup, Measuring 500 Ml. For Liquid Glass (500ml Heat Resisting Measuring Glass) 40 Pc Cutter, Dough (type: Scrapper Body Shape: Straight Blade Material: Stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Lenght : 15 Cm X Width: 11 Cm X Thickness: 1.2 Mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage) 40 Pc Cutter, Pie (stainless Steel Rolling Knife/pizza Cutter) 30 Pc Flour Sifter,hand Cranked (type: Hand Cranked Body Shape: Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm ( Minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh # 30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Spring Action Squeeze Handle Stainless Steel Preferably With A Packing Case Dishwasher Safe) 40 Pc Grater (type: Four Sided Box Grater Body Shape: Box In Shape Material: Stainless Steel Blade And Plastic (polypropylene Handle) Grater Dimensions: Height- 25 Cm X Width-13 Cm X Depth-10 Cm (minimum) Side 1: Large-hole Shredder With 6 Mm Hole Side 2: Slicer Side 3: Small-hole Shredder With 3 Mm Hole Side 4: Grater With Strips About 1.27 Cm To 2.54 Cm Length Preferably With Packing Case Food Grade & Dishwashing Safe) 50 Pc Knife, Kitchen (premium Quality Stainless Steel Kitchen Knife, 6-8” In Length) 20 Pc Knife, Pallete (premium Quality Stainless Steel Pallete Knife Ideal For Butter.) 50 Pc Ladle, 3oz (premium Quality Stainless Steel Soup Ladle, 3oz) 40 Pc Loaf Pan, Big (carbon Steel Non-stick Loaf Pan, Size: L=32,w=13,h=7cm Minimum) 40 Pc Loaf Pan, Medium (carbon Steel Non-stick Loaf Pan, Size: L=28, W=15.5, H=7cm Minimum) 40 Pc Loaf Pan, Small (carbon Steel Non-stick Loaf Pan, Size: L=25.5, W=13.5, H=6cm Minimum) 40 Pc Muffin Pan, Big (carbon Steel Non-stick Muffin Pan, 12 Holes,3oz) 40 Pc Muffin Pan, Medium (carbon Steel Non-stick Muffin Pan, 9 Holes,3oz) 40 Pc Muffin Pan, Small (carbon Steel Non-stick Cupcake Pan, 6 Holes) 70 Pc Pie Pan, 10'' (premium Stainless Steel/aluminum Pie Plate. Thick And Durable, 10” In Diameter) 70 Pc Pie Pan, # 8 (premium Stainless Steel/aluminum Pie Plate. Thick And Durable, 8” In Diameter) 50 Set Pillars, Cake (premium Quality Acrylic Cake Support Pillar, 12cm In Diameter(minimum),straw Size Diameter ) 60 Pack Piping Bag (reusable Silicone Piping Bag, Biggest Size, 100pcs Per Pack) 40 Pc Rectangular Pan (carbon Steel Non-stick Rectangular Cake Pan. Size: L=10.8", W=7", H=1.5", Minimum) 70 Pc Rolling Pin, Plastic (non-stick Rolling Pin Made With Food Grade Nylon, Size:13") 100 Pc Rubber Scraper, Silicone (size: 21cm X 4.1cm, Material: Silicone) 40 Pc Sauce Pan Non Stick (non-stick Sauce Pan With Lid, Size: 20cm) 40 Pc Sheet Pan / Cookie Sheet (aluminum Baking Sheet, Size: 13x18”) 50 Set Spoon, Measuring (premium Quality Stainless Steel Measuring Spoon Set, Compost Of 1/8tsp, 1/4tsp, 1/2tsp, 1tsp, 1/4tbsp, 1/2tbsp, 1tbsp)) 70 Pc Spoon,wooden (premium Quality And Durable Long Handled Wooden Spoon/ladle. Length: 30.5cm Minimum) 40 Pc Strainer (stainless Steel, Fine Mesh Strainer, Size: 18cm) 40 Set Tip, Decorating, Large (type: Tube Tips Body Shape: Nozzles With Different Shape Material: Stainless Steel Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Roping,stars, Leaves And Other Designs Comes With 24 Different Shapes Of Nozzles Packed In Plastic Storage Box Smooth And Deformities Free Must Be Branded) 30 Pc Weighing Scale, 10 Kg. (kitchen Weighing Scale, 10kg Maximum) 40 Pc Weighing Scale, 5 Kg. Digital(digital Kitchen Weighing Scale, Digital Price Computing Weight Electronic Scale, Capacity Is At Least 5kilograms, Pan Size 34.5 X 23.5cm) 70 Pc Wire Whisk, Medium (stainless Steel Wire Whisk, Size: 14”) Lot 5. Sumirap National High School And Tangub City National High School ( Cookery Nc Ii )-php 1,405,964.00 30 Pcs. Apple Corer, Body Shape: Tubular Material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Preferably With Packing Case Dishwasher Safe. 4 Pcs. Bain Marie, Table, (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Soiuce: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60 Hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 20 Pcs. Blender, Electric Heavy Duty, Body Shape: Round Jar Material Housing: Plastic (polypropylene) Jar Height : 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220 Volts / 240 Volts,50 Hz / 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades 40 Pc Board, Chopping/ Cutting, Plastic, Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe. 20 Pcs. Boiler, Double, Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 30 Pcs. Braising Pan, Medium, Body Shape: Round Material: Enameled Cast Iron And Stainless Steel Size: Diameter: 28 Cm X Height: 10 Cm (minimum) Capacity: 4 Liters (approximate) With Stainless Steel Cover, Solid Cast Stainless Steel Side Handles And Riveted Handle On Both Side: Length: 10 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 30 Pcs. Can Opener, Body Shape: Materials: Stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Multi-use: 3 In 1 Can Opener Also Opens Bottle Tops- Can Lids And Tabs. 30 Pcs. Casserole,medium Pot, Body Shape:round Material:stainless Steel, 0.7 Mm Thick Dimension: Diameter- 24 Cm X Height -14 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Preferably With Packing Case . 30 Pcs. Casserole,small Pot, Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 20 Cm X Height -12 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm. 20 Pcs. Colander, Medium, Medium Body Type: Round Material: 304 Stainless Steel Diameter: 30 Cm (minimum) Capacity: 8 Quarts (9 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 To 10 Mm Body Thickness: 0.8 Mm (minimum) 20 Pcs. Colander, Small, Body Shape: Round Material: 304 Stainless Steel Diameter: 26 Cm (minimum) Capacity: 5 Quarts (5.6 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Body Thickness: 0.8 Mm (minimum) Full-ring Support Base, 15 Cm Diameter Preferably With Packing Case Food Grade And Dishwasher Safe 20 Set Cup,measuring( For Solid) Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 20 Pcs. Dispenser,paper Towel Body Shape: Rectangular Material: Abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Mounting Style: Wall Mounted Tissue Box 12 Pcs. Fan, Electric, Ceiling Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names 6 Pcs. Fire Extinguisher With Contents .for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 20 Pcs. Fish Poacher,medium, Body Shape: Oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12 Cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Includes Stainless Steel Lid With Handle And Removable Insert 20 Pcs. Fork, Carving Body Shape: Square Shape Prong Prong Material:high Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prong Comes With Square- Shaped Prongs And Pointed Tips Abs Plastictriple-riveted Handle Preferably With Packing Case 400 Pcs. Fork, Kitchen Body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle :abs Plastic Number Of Tines: 2 Tines With Tapered End 36 Dozen Frying Pan, Large, Non Stick, Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-30 Cm (minimum) X Height- 5.5 Cm (minimum) 40 Pcs. Frying Pan, Medium, Non Stick, Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-24 Cm (minimum) X Height- 4.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 19 Cm Long (minimum) Preferably With A Packing Case 30 Pcs. Frying Pan Small, Non Stick , Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-20 Cm (minimum) X Height- 3.8 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 12 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 22 Pcs. Funnel, S/s, Medium, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-15 Cm (minimum) X Height- 15.8 Cm (minimum) Tube Diameter: 2 Cm X Length: 7.3 Cm (minimum) Comes With Handle For Easy Hanging Preferably With Packing Case Dishwasher Safe 22 Pcs. Funnel, S/s, Small, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe. 20 Pc Garbage Bin, Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe. 20 Pc Glass Rack, Body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 1/2 Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case 20 Pc Ice Cream Scoop, Stainless Steel Ice Cream Scoop 45mm. Simply Squeeze Handle. 30 Pc Knife,boning, Body Shape: Ergonomic Material: High Carbon Steel Overall Length: 28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets Preferably Wiht Packing Case Dishwasher Safe 30 Pc Knife,chef, Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) 30 Pc Knife,cleaver, Cutting Edge: Straight, Pointed End Type: Cleaver Knife Body Shape: Flat Blade Material: Forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets Blade Thickness: 3 Mm (minimum) 30 Pc Knife,oyster, Body Shape: Ergonomic Blade Material: Stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) 4 Pc Light,emergency, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector 4 Pc Meat Slicer, Body Shape: Circular Housing Material: Die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 30 Set Pastry Tube, Stainless Steel Pastry Tube 24, Big 40 Pc Peeler, Y -type, Rack Dimension: Length: 38 Cm X Width 23 Cm (minimum) Type: Y-type Peelers Body Shape: Ergonomic Material: Stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Handle Material: Stainless Steel Handle Length: 4 3/4 Inches X 1 Inch Diameter (minimum) 2 In 1 Design With 2 Blade Reel, Built In Potato Eye Remover And Hole For Hanger Preferably With A Packing Case 14 Set Pepper And Salt Mill Food Grade And Non-toxic Material. Mill Cookery Nc Ii Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism 20 Pack Piping Bag, Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 10 Pc Plate Rack Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) 12 Set Preparation Table With Sink, Heavy Duty Wire Shelving, 2.6 Mm Diameter (minimum) Table With Sink Cookery Nc Ii Type: Preparation Table With Sink & Sheleves Body Shape: Rectangular Material: Stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Table Top And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) 4 Pc Pressure Cooker, Cooker Body Shape: Round Material: Polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring 24 Pc Roasting Pan , Body Shape:rectangular Material: Stainless Steel Dimension: Length: 40 Cm X Width-35 Cm X Height -7 1/2cm (minimum) Thickness: 1.5 Mm Thick (minimum) Welded Handles On Both Sides Removable Stainless Steel Wire Rack 40 Pc Scissor, Kitchen Type:kitchen Scissor Body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum ) Width: 7.5 Cm (minimum) 30 Pc Siever,small Type: Fine Mesh Siever Body Shape: Round Material: Stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Preferably With A Packing Case 30 Pc Skimmer, Fine Type: Medium Fine Mesh Skimmer Body Shape: Round Material: Stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Handle Has Hole For Hanging Preferably With A Packing Case 30 Pcs. Skimmer,spider, Dishwashing Safe Type: Skimmer, Spider Body Shape: Round Material: Stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm (minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Preferably With A Packing Case Dishwasher Safe. 24 Pcs. Soup Cup, Rack Body Shape: Square Material: Polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm No. Of Compartment: 16 Compartments 20 Pc Soup Ladle, 12oz Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 34 Cm (minimum) Capacity: 12 Oz. (341 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 20 Pc Soup Ladle, 3 Oz Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 20 Pc Soup Ladle 6 Oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 6 Oz. (170 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 20 Pc Soup Ladle 8 Oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 8 Oz. (236 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case 62 Pc Spatula, Type: Offset Spatula Body Shape: Flat Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches Preferably With A Packing Case Dishwasher Safe Must Be Branded. 400 Pc Spoon, Kitchen Body Shape: Oval Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe Must Be Branded. 60 Pc Spoon, Kitchen (slotted) Kitchen Spoon Slotted Body Shape: Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) 30 Set Spoon, Measuring Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 40 Pcs. Spoon, Parisienne Body Shape: Round Double Headed Parisiennes Scoop Bar Tool Material: Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Draining Small Hole In The Scoop 40 Pc Spoon, Serving Preferably With A Packing Case Type: Serving Spoon Body Shape: Oval Materials: Stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 30 Pc Spoon,wooden Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 20 Pc Stock Pot,large . Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) 30 Pc Strainer, Chinois,small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) 30 Pc Strainer,chinois,medium Medium Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) 26 Pc Strainer,medium,fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) 30 Pc Strainer, Small,fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) 30 Pc Tenderizer, Medium Aluminum Meat Tenderizer 16 Pc Thermometer,pocket/pin Pocket/pin Food Thermometer 20 Pc Tong,12'' Body Shape: Standard Material: Stainless Steel Size: 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 20 Pc Tong 8'' Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 30 Pc Tray,baking,small, Tray Body Shape: Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) 36 Pc Tray,utility,medium,plastic White Plastic, White Multi Purpose 13”x10”utility Tray 30 Pc Turner,3'x6'', Slotted Turner, 3" X 6" Type: Slotted Turner, 3" X 6" Body Shape: Straight Material: Stainless Steel Blade Size (lx W): 6 Inches X 3 Inches (minimum) Handle Length: 5 Inches (minimum) Overall Length: 13 Inches (minimum) Solid Turner With Straight Slotted Blade Wooden Handle With Triple Rivets Preferably With A Packing Case Dishwasher Safe Must Be Branded 4 Pc Utility Cart, Stainless Steel 3 Tier Trolley Cart 75x40x85. 20 Pc Weighing Scale 1 Kg. Digital Type: Digital Weighing Scale Body Shape: Rectangular Materials: Engineering Plastic And Stainless Steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm ) 163 Mm X 245 Mm X 79 Mmm (minimum) 20 Set Weighing Scale 5kg. Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 40 Set Wire Skimmer Small, Type: Skimmer, Wire Mesh Body Shape: Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Preferably With A Packing Case Dishwashing Safe Must Be Branded. 40 Pc Wire Whisk Heavy Duty Type: Wire Whisk, Heavy Duty Body Shape: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 40 Pc Wire Whisk, Medium, Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 40 Pc Wire Whisk,small, Type: Wire Whisk, Small Body Shape: Baloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 18 Pc Wok,medium Type: Wok, Medium Body Shape:round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded 18 Pc Wok,small Type: Wok, Small Body Shape: Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded 12 Pc Working Table, Stainless, 4 Seaters Stainless Working Table , Two Layer (120x60x80) 30 Pc Zester, Type: Cheese Zester Body Shape: Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe The Plastic Material Used Must Be Non-toxic Must Be Branded. Lot 6. Sumirap National High School (housekeeping Nc Ii)-php 326,452.00 1 Pc Alarm Clock Alarm Clock, Digital, Overall Dimensions: 13.5 X 8 X 4.5 Cm (approx.) Material: Plastic (pe/abs) Illuminated Lcd Digital Display: Time (12/24), Calendar (mm/dd), Temperature, Alarm Status (on/off), Snooze Display Size: 10 X 5 Cm (minimum), Time Can Be Read 30 Ft Day Time. Runs On Aaa Battery Which Come Together With The Item Smooth Surface, No Sharp Edges, Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting) 25 Pc Apron, Polyester-cotton (bib Apron, Sleeveless Adjustable Neck Loop Material : Polyester - Cotton Fabric Dimension : 70 To 60 Cm (minimum) With 2 Or 3 Pockets Uni-color, Dark No Sharp Edges And Loose Threads) 5 Pc Baskets, Laundry (3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges) 1 Set Bed, Queen (bed Set, Queen Size (60 X 75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 20 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges) 1 Set Bed, Single (bed, Single Size (w36 X L75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 13 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. 3) No Sharp Edges) 10 Pc Board, Ironing (type: Foldable Type Ironing Board Body Shape : Standard Material : 25 Mm Tubing Approx., 0.8 Mm Thickness Board Size: 32 Inches (minimum ) Body Size :120 Cm X 30 Cm X 5 Cm Color : Any Comes With Box No Sharp Edges) 25 Pair Boots, Safety, Plastic (upper Material: Elastic Pvc Sizes: 7 Inches - 5pcs 8 Inches - 5pcs 9 Inches - 5pcs 10 Inches -5pcs 11 Inches - 5pcs Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size) 15 Pc Brushes, For Housekeeping (brush, Floor Scrubbing, Angled Long Handle Bristle Material : Plastic, Stiff Handle Material : Metal Tubular Corrosion Reistant, Overall Length : 120 Cm. (minimum) Bristle Length : 5 Cm (=/- 1cm) Scrubbing Surface : 25 X 6 Cm (+/-1 Cm) No Sharp Edges) 10 Pc Buckets, Water (water Bucket Bucket Material : Hard Plastic, Round Body Capacity : 10 To 12 Liters Handle Material : Steel Smooth And Glossy Surface, No Sharp Edges) 10 Pc Caddy, Toilet (carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material :plastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges) 1 Unit Carpet Sweeper (carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material : Hard Plastic ,(abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width : 8 Inches (minimum) Capacity (volume) : 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting.) 1 Unit Cart, For Housekeeping Nc Ii (housekeeping Cart Trolley, Equipped With Three-shelves With Steel/laminated Panels Single Door, Top Layer With Divider, Bag Holder, And 4 Wheels. Cart Frame: Steel, Powder Coated. Wheels: 2non-swivel 2 Swivel, 6 Inch Diameter, Non-markings. Overall Dimensions : Rectangular 90 X 48 X 1010 Cm (minimum) Comes With Accessory Linen Bag Smooth Surface, No Sharp Edges) 50 Pc Cleaning Cloth, Linth-free (lint Free Cleaning Cloths Material : Cotton Dimensions : Rectangular 16 X 26 Inch) 1 Unit Coffee Maker (coffee Maker, Electric Material: Metal, Plastic, Glass. Capacity: 6 Cups (minimum). Detachable Tank, With Water Level Indicator. Non-stick Warming Plate : Removable And Washable Filter Non-drip Valve : Lighted On/off Switch Power Supply: 220 V -240 V Ac 50/60 Hz , 500w Minimum Comes With A Heat Resistant Glass Pitcher. With A 1 Meter (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option). Smooth Surface, No Sharp Edges With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item. Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines) 5 Pc Dust Pan (dust Pan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges) 5 Pc Duster, Anti-static (anti-static Duster Duster Material : Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material : Hard Plastic, No Sharp Edges) 7 Unit Fan, Electric ( Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service) 3 Pc Fire Extinguisher(with Contents) (1.for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 11.includes With User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment 12.1 Year Warranty Parts And Service 13.the Item Must Be Branded And Have Good Quality) 10 Pc Flashlight (flashlight Led 1,000 Lumens (minimum), Color : White , Battery: Rechargeable, At Least 3,500 Mah , Can Be Used Also With 3 X Aaa Batteries; Body: Aluminum Alloy, No Sharp Edges Dimensions : 5 Inches X 1 Inch Diameter (minimum) Operating Duration Of Battery When Fully Charged : At Least 2 Hours; Includes 220/240vac, 50/60hz Power Adapter /charger And User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, With 1 Year Warranty 10 Pc Flat Iron (clothes Flat Iron, Electric Material : Metal /plasic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension : (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains : Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines.) 10 Pc Foam, Scrubbing (1. Material: Cellulose And A Scouring Pad On One Side 2. Dimension: Length : 140 - 180 Mm ; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm 3. The Item Must Be Of Good Quality) 4 Pc Garbage Receptacles (1.bucket / Tub Material : Hard Plastic, (ps) Polystyrene 2.bucket / Tub Color : Any Color 3.capacity (gallons) : 3 Gal. (minimum) Comes With A Cover 4.the Item Must Have Good Quality) 30 Pair Gloves, Rubber (1.heavy-duty Latex-free Vinyl Rubber Gloves 2.thickness : 4 Mil 3.color : Any Color 4.size : Medium 5.other Features: Acid/solvent Resistant. 6.the Item Must Be Of Good Quality) 15 Pc Goggles, Safety (safety Goggles, Clear Polycarbonate - One Piece Lens With 180° Panoramic View, Non-fog Size/dimension: L 17 - 18.5 Cm X W 8 Cm X D 5-7.5 Cm High Impact Resistant, Ansi "z87" Compliant Firm And Comfortable Seal Around Forehead, Cheeks, Nose And Temples Protects Against Splash, Chemicals, Dust Adjustable Head Strap Shall Bear Mark Z87 Embossed Or Engraved Or Etched On The Item. Smooth Surface, No Sharp Edges) 1 Pc Hairdryer( Electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating : 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service) 2 Roll Hose, Water(water Hose Material: Pvc Fiber Reinforced, Three (3) Layers; Any Color; Hose Length: 50 Feet; Hose Diameter: 5/8 Inches; Pressure Capacity: 200 Pounds Per Square Inch (minimum); Fitted With Male And Female Brass Couplers (nh, 11.5 Tpi) For Spray Nozzle No Sharp Edges) 3 Pc Kettle, Electric(electric Kettle Cordless (with Pouring Spout), Hinged Lid, Detachable From And Can Rotate On Its Corded Base Material : Round Stainless Body, Plastic Handle, Lid And Base Capacity : 1.5 To 2 Liter Automatic Shut - Off, With Power Indicator Light Power Rating: 220//240vac, 50/60hz, 1000 -1600 Watts Base With A 50 Cm (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges; Dti-bps Certified Comes With English Manual That Contains: Operation Procedure, Maintenance And Safety Guide. The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item.) 5 Pc Laundry Sorter(3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions : Rectangular 22 X 15 X 8 Inch (minimum) Frame Material : Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions : Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) Smooth Surface, No Sharp Edges) 2 Pc Light, Emergency(emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector Power Rating: 220 -240 Vac , 50/60 Hz 20-24 Hours Charge Time Dimensions: Rectangular 27 X 7 X 27 Cm (approx.) Sooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item.) 2 Pc Mirror Wall Mirror With Frame Flat Glass Mirror, 2 Mm Thick (minimum), Clear With No Distortion Frame: Wood Or Plastic Commercial Finish Rectangular Shape, 3600 Sq.cm (minimum) Includes Mounting Accessories Smooth Surface, No Sharp Edges) 20 Pc Mop (mop, Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length : 40 (minimum), No Sharp Edges 1 Set Polisher, Floor, Electric, With Accessories(electric Floor Polisher With Accessories Material: Stainless Steel, Aluminum Alloy Handle: Stainless Tube, Adjustable Height 1 Meter Long (approximate), With Dual Switch Lever Size/capacity :13 Inch (minimum) Diameter Power Supply: 220/240 Vac, 50/60 Hz. Power: 1/3 Hp (minimum) Rotation Speed : 160 Rpm (minimum) Heavy Duty (royal) Power Cord Length : 12 Meters (minimum) With Type A Plug (or Providing 10a Plug Adapter Is An Option) With Pair Of Rubber Wheels, Smooth Surface, No Sharp Edges Comes With Pad Holder, 2 Pcs - Polishing Brush And 3 Pcs - Floor Polishing Pads Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, Brand Name And Electric Rating Permanently Mark On The Item, With 1 Year Warranty Parts And Service The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 5 Pc Shelving(shelving, Open, Knockdown Type, Adjustable Shelves Metal Powder Coated Frame Number Of Shelves : 5 Overall Dimensions : 85 X 30 X 180 Cm(minimum) Sturdy Connection, No Wobble Smooth Surface, No Sharp Edges) 5 Pc Sign, Caution(caution Sign, A Shape-2 Panel Self Standing, With D-handle, Collapsible For Easy Storage Material : High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color : Yellow Print Description : "caution: Wet Floor" On One Side "cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100 -120 Mm X 50 -70 Mm, Arial Smooth Surface, No Sharp Edges) 10 Pc Sponges, Dish(dish Sponge, Cellulose, Non-scratch Dimensions : 5 X 3 X 1 Inch (minimum) Branded) 10 Pc Spray Gun, Water(barber/salon Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded) 10 Pc Squeegee(squeegee, Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges ) 5 Pc Squeezer, Mop(mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color : Yellow With 3 Inches Non-marking Rubber Casters "caution" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges) 1 Pc Step Ladder(material: Aluminum U Channel Capacity: 250 Lbs (minimum) Type: Flatform Type Number Of Step: 6 (including Top Step) Reach Height: 6 To 8 Feet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum) Twin Steps With Gripped Treads To Prevent Slipping Step Braces On Top And Bottom Step Heavy Duty Aluminum Foot Bracket With Slip-resistant Foot Pad With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Brandedfeet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum)) 2 Pc Vacuum Cleaner, Dry And Wet(electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material : Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity : 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 1 Unit Washer, Laundry(1. Front Load Electric Washer, Laundry 2. Electronic Control, Digital Indicator Display , Transparent Glass Door 3. Body Material : Steel, Powder Coated, Any Color 4. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) 5. Drum Material : Stainless Steel 6. Capacity : 8 Kg (minimum) 7. Spin Speed : 1200 Rpm (minimum) 8. Power Rating: 220 /240vac, 50/60 Hz. 9. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) 10. Smooth Surface, No Sharp Edges 11. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9.includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures 12.the Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service 13. With Service Centers Located In Major Cities In The Philippines. 14.the Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market.) 2 Pc White Board(white Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges) Lot 7. Tangub City National High School (food And Beverage Services Nc Ii) Php 571,245.00 50 Pcs Chair, Dining Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimesion: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality 4 Pcs Coffee Pot, 2 Pints Type: Manual Drip Body Shape: Round Material : Stainless Steel With Cover Capacity : 2 Pints Outside Diameter : 90 -110 Mm Over-all Height : 200 - 230 Mm Thickness : 0.5 - 1 Mm With Handle And Spout Packed In Carton Box The Item Must Have Good Quality 6 Pcs Container, Creamer Design: Type: Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter : 50 - 65 Mm Height : 80 - 105 Mm Color : White Appearance : Glossy White Packed In Carton Box The Item Must Have Good Quality 24 Set Cups Ans Saucers 5-6 Oz. 1. Material : Porcelain 2. Capacity : 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color : White 5. The Item Must Be Of Good Quality 6. Packed In Carton Box 10 Pcs Folder, Menu Type: Leather Menu Folder Body Shape: Rectangular Material: Leather With 2 Partitions And 6 Inserts Size: 31.5cm X 24.5cm Color: Brown/black Applicable Paper Size: A4 50 Pcs Fork, Cocktail 1. Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design 2. Type : Rounded Tip Handle 3. Over-all Length : 110 - 165 Mm 4. Width : 20 - 30 Mm (minimum) 5. Handle Thickness : 2 Mm To 4 Mm 6. Handle Length : 75 - 90 Mm 7. Small, 8. Color : Silver 9. The Item Must Be Branded And Have Good Quality. 50 Pcs Fork, Dessert Type : Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance : Stainless Steel, Highly Polished,with Plain Design, Rounded Tip Handle Length : 150 Mm - 175 Mmwidth : 20 - 30 Mmhandle Thickness : 1.5 Mm - 3 Mm Number Of Tines : 4 Handle : 130 Mm (minimum) Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 60 Pcs Fork, Dinner Type: Dinner Fork Body Shape: Fork Shape Material / Appearance : Stainless Steel, Highly Polished, With 4 Tines Over - All Length : 120 - 175 Mm Thickness Of Handle : 2 - 3 Mm Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 36 Pcs Fork, Fish Type : Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance : Stainless Steel, Highly Polished, With Plain Design Over-all Length : 180 - 215 Mm Fork Width : 1.5 Mm - 3 Mm Fork Thickness : 1 Mm - 2 Mm Number Of Tines : 4 Length Handle : 120 - 130 Mmhandle Thickness : 2 Mm - 3 Mm Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 36 Pcs Fork, Oyster Type: Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Packed In Plastic Pouch The Item Must Be Of Good Quality 24 Pcs Glass, Champagne Flute Type : Flute Glass Body Shape: Round Material: Clear Crystal Glass Dimension : Height: 20 -24 Cm, Top Diameter: 50 -70 Mm, Bottom Diameter: 60 - 80 Mm Capacity: 250 Ml. (minimum) Thickness: 1.5 - 3 Mm Packed In Carton Box The Item Must Have Good Quality 36 Pcs Glass, Collins Type: Tumbler Body Shape: Round Material : Clear Glass Capacity : 10 Oz To 14 Oz Thickness : 1.5 -3 Mm (minimum) Packed In Carton Box The Item Must Have Good Quality 36 Pcs Glass, Juice/hi-ball 1. Material : Clear Glass 2. Type : Hi-ball 3. Height : 140 - 160 Mm 4. Bottom Diameter : 50 -70 Mm 5. Top Diameter : 50 - 70 Mm 6. Thickness : 2 - 4 (minimum) 7. Capacity : 8 Oz. To 10 Oz. 8. Diswasher Safe 9. The Item Must Be Branded And Good Quality 10. Packed In Carton Box 36 Pcs Glass ,pilsner(ice Tea Glass) Type:falired Rim,body Shape:round Slender Bowl,material:clear Glass Capacity:20 0z To 23 Oz With Flaired Rimand Slender Shape Packed In Carton Box.the Item Must Have Good Quality. 36 Pcs Glass, Red Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity : 250 -300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 85 - 90 Mm Base Diameter : 75 - 85 Mm Base Thickness : 2 - 4 Mm 40 Pcs Glass, White Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 - 3 Mm Over -all Length : 200 -220 Mm Capacity : 270 - 300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 75 - 85 Mm Base Diameter : 70 - 80 Mm Base Thickness : 2 - 5 Mm 4 Pcs Gravy Boats Type: Steel Type Body Shape: Boat Shape With Handle Material: Stainless Steel Capacity : 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Packed In Plastic Pouch 4 Pcs Ice Bucket, 2 Liters With Tongs Type: Steel Type Body Shape: Circular Set Includes: A. Ice Bucket Material : Stainless Steel Diameter : 140 - 180 Mm Height : 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity : 2 Liters (minimum) The Item Must Have Good Quality 24 Pcs Knife, Butter 1. Material : Stainless Steel W/ Highly Polished Appearance 2. Over-all Length : 140 Mm - 150 Mm 3. Handle Thickness : 3 Mm - 5 Mm 4. With Dull Edge And Rounded Tip 5. The Item Must Have Good Quality. 6. Packed In Carton Box 24 Pcs Knife, Dinner Type: Dinner Knife Body Shape: Flat With Round Tip Material / Appearance : Stainless Steel Blade Highly Polished Handle Material : Stainless Steel Overall Length : 160 - 190 Mm Blade Thickness : 2 - 4 Mmhandle Thickness : 3 - 6 Mm Serrated Blade With Rounded Tip Packed In Carton Box The Item Must Have Good Quality 24 Pcs Knife, Fish Type : Fish Knife Body Shape: Flat With Pointed Tip Material / Appearance : Stainless Steel, Highly Polished W/ Plain Design Overall Length : 200 - 220 Mm Width Blade : 20 - 25 Mm Thickness Of Blade : 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Wide Blade, Dull Edge, Tip Made With A Notched Point Color : Silver Packed In Carton Box The Item Must Have Good Quality 20 Pcs Napkin Holder (stainless) Type: Steel Type Body Shape: Rectangular Material : Stainless Steel With Highly Polished Appearance Dimension : Width : 70 - 90 Mm X Length : 150 - 170 Mm , Thickness : 0.7 Mm -2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 20 Pcs Order Pads Type: Numbered Pads Body Shape: Rectangular Material : 80 Gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Can Take 1000 Orders Before You Run Out Packed In A Plastic Pouch 12 Pc Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case Food Grade And Nontoxic Must Be Branded 50 Pc Plate Covers Type: Steel Type Body Shape: Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Packed In Plastic Pouch The Item Must Have Good Quality 50 Pc Plate, Dessert, 7" To 8" Type: Plain Type Body Shape: Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color : White Inner Diameter: 145 To 165 Mm Thickness : 3 To 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 60 Pc Plate, Dinner, 10" Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Color: White Inner Diameter : 200 Mm - 215 Mm Outer Diameter : 250 - 260 Mm Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 50 Pcs Plate, Fish, 8" To 9" Type: Plain Type Body Shape: Circular Material : Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color : White Inner Diameter : 165 Mm - 190 Mm (minimum) Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 10 Pcs Round Table (8's) Type: Foldable Body Shape: Round Material: High Density Polyethylene Table Top Powder Coated Steel Frame Size: 154cm X 74cm X4.5cm (minimum) Good For 8 To 10 Seater Capacity Tube Size : 28 Mm Diameter X 1 Mm Thickness Packed In A Carton Box The Item Must Have Good Quality 50 Pcs Salad Forks Type: Salad Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Length: 150 Mm - 175 Mm Thickness Of Handle : 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 50 Pcs Salad Knife Type: Salad Knife Body Shape: Semi Rectangular Blade With Pointed Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Overall Length: 145 -160 Mm Blade Thickness: 2 Mm To 4 Mm Handle Thickness: 4 Mm To 6 Mm Handle Material: Stainless Steel Rounded Tip Handle Packed In Carton Box The Item Must Have Good Quality 50 Pcs Salad Plates 7" To 8" Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Supply Must Be A Set Consisting Of One (1) Each: 7 Inches And 8 Inches Plates Color: White Diameter (inner): 150 Mm - 165 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 20 Pcs Salt And Pepper Shakers Type: Glass Type Body Shape: Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Aluminum Cover Packed In Carton Box The Item Must Have Good Quality 25 Pcs Sauce Laddles Type: Spouted Bowl Body Shape: Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Server, Cake 1. Material : Stainless Steel Blade , Highly Polished Appearance 2. Over-all Length : 220 To 270 Mm 3. Width : 60 - 80 Mm 4. Thickness : 1.5 Mm To 2 Mm 5. Handle : 120 -140 Mm Long, Non-toxic Plastic 6. Shape : Shovel-shaped 7. Color : Silver 8. The Item Must Have Good Quality 9. Packed In Carton Box 50 Pcs Service Forks Type : Service Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Packed In Plastic Pouch 25 Pcs Service Tray Type: Plastic Body Shape: Rectangular Material: Plastic (pp) Size : 14 Inches X 18 Inches X 1 Inch (minimum) Color : Any Packed In Plastic Pouch The Item Must Have Good Quality 25 Set Show/service/base Plates 11" To 14" Type: Plain Type Body Shape: Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces 50 Pcs Side Plates Or Bread Plates 6'' Type: Plain Type Body Shape: Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness : 3 Mm - 6mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 50 Pcs Side Towels Type: Chef's Towel Body Shape: Rectangular Material: Oxford Polyester Soft Cloth Over-all Length : 640 - 680 Mm Over-all Width : 420 -460 Mm Color : Plain White Packed In Plastic Pouch The Item Must Have Good Quality 25 Pcs Silver Platter Type: Steel Type Body Shape: Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 50 Pc Soup Bowl Type: Plain With Two Handles Body Shape: Circular Material : Porcelain Capacity : 24 Oz. (minimum) Packed In Carton Box The Item Must Have Good Quality Packed In A Carton Box 25 Pc Soup Laddle Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length : 220 -235 Mm Ladle Bowl Details : 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Handle Details : 145 - 155 Mm Long X 12 - 25 Mm Wide X 1.5 -3 Mm Thick Color : Silver With Hang Hole For Hanging And Easy Access 15 Pc Soup Tureen Type: Steel Body Shape: Round Material: Stainless Steel Capacity: 7 - 11 Quart Size : 60 X 35 X 32 Cm (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoon, Dinner Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoon, Dessert Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoons, Service Type : Service Spoon Body Shape: Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Spoons, Soup (cream And Cosume) Type: Soup Spoon Body Shape: Round Material/appearance : Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length : 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Shorter Handle : 110 Mm - 170 Mm Thickness : 1.5 Mm - 3 Mm Color : Silver Packed In Plastic Pouch 50 Pc Steak Knife Type: Steak Knife Body Shape: Flat With Serrated Edge Material: Stainless Steel Steel Blade With Wooden Handle Length: 170 Mm To 203 Mm Handle Wood Thickness: 10 - 14 Mm With Serrated Blade Packed In Carton Box The Item Must Have Good Quality 25 Pc Sugar Container Type: Glass Type Body Shape: Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Packed In Carton Box The Item Must Have Good Quality 50 Pc Table Cloth, 54 X 54 Inches Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Color: Plain White Dimension: L 54 Inches X W 54 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 100 Pc Table Cloth, Rectangular Type: Plain Cloth Body Shape: Rectangle Material : Linen Size : 120cm X160cm (minimum) Color : Any Color But Not Black Feature: Washable Packed In A Plastic Pouch 100 Pc Table Napkins, Cloth, 16"x16" Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Size: L 16 Inches X W 16 Inches (minimum) Color: Plain White Packed In Plastic Pouch The Item Must Have Good Quality 80 Pcs Table Skirting Cloth 90" To 90" Type: Plain Cloth Body Shape: Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Table, Square/rectangular (4's Or 6's) Type: Foldable Plastic Body Shape: Square/rectangle Material: High Density Polyethylene Table Top Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Good For 4 Persons Packed In Carton Box The Item Must Have Good Quality 20 Pcs Tea Pot, 2 Pints Type: Porcelain Type Body Shape: Round With Handle And Pouring Spout Material : Porcelain Capacity : (2 Pint) Color : White Packed In Carton Box The Item Must Be Of Good Quality 50 Pcs Teaspoon Type : Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 15 Pcs Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 30 Pcs Tooth Pick Holder Type: Steel Type Body Shape: Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 20 Pcs Tray Stand Type: Foldable Body Shape: Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Packed In Plastic Pouch The Item Must Have Good Quality 30 Pcs Tray, Bill Folders/change 1. Material : Heavy Duty Plastic ( Abs ) Or Its Equivalent 2. Height : 190 - 220 Mm 3. Width : 120 -140 Mm 4. Thickness : 2 Mm To 3 Mm (minimum) 5. Color : Black 6. With Check And Pen Holder 7. The Item Must Have Good Quality 8. Packed In Plastic Pouch 20 Pcs Tray, Round (bar) Type: Plastic Body Shape: Round Material: ( Pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Packed In Plastic Pouch The Item Must Have Good Quality 50 Pcs Water Goblet Type: Water Goblet Body Shape: Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Packed In Carton Box The Item Must Have Good Quality 30 Pcs Water Pitcher (stainless) Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality Lot 8. Tangub City National High School (front Office Services And Local Guiding Services) Php 232,832.00 50 Pcs Calculator Type: Simple Calculator, Non Scientific Body Material: Hard Plastic Minimum Size: 110mm Width X 140mm Long Lcd Display: At Least Font Size Is 8mm X 5mm With Dual Power; Solar Cell And Battery With At Least 8 Digits Display Includes Spare Battery Packed With Protective Carton Box User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment, 1 Pcs Cart, Bell Boy Type:hotel Luggage Trolley Capacity: At Least 450 Kilograms Minimum Dimensions: Length - 1000mm X Width - 600mm X Height - 1700mm Frame Material: Stainless Steel Tubing Stainless Tube Diameter: At Least 35mm Black Powder Coated Steel Platform With Carpeted Surface And Rubber Bumper At The Edge With 4 Pieces X 200mm Diameter Black Pneumatic Swivel Wheels Packed With Shipping Carton Box Branded 1 Pcs Cash Register With Drawer Printer: Width: 57mm (minimum) Speed: 2 Lines/sec (minimum) Lcd Display Size: 5cm Width X 10cm Long(minimum) With Drawer At Least 4 Bills And 5 Coins Compartments With Drawer Dimension At Least 410mm Width X 450mm Depth Input Method: Numeric 10-key Interface With At Least 2 Ports Power Source: 220-240volts Ac, 50/60hz; With Ac/dc Adapter Can Be Operated With Battery Programmable User's Manual In English Which Includes: A. Parts Manual With Labels, 1 Pcs Credit Card Imprinter Height Of The Imprinter 2 1/2 Inch (minimum) X Width 5 1/2 Inch (minimum) X Length 11 Inches (minimum) Carriage Material: Steel Body:plastic Color: Black 20 Characters Per Line Card Mounting Can Accepts At Least 0.030" Thick Size Credit Cards Plate Can Accommodate Up To 5 Lines, Manual Type With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures 30 Pc Credit Card Voucher Holder Material: 3 Mm Thick Clear, Acrylic, Dimensions: Height: At Least 255 Mm, Width: At Least 210 Mm, Thickness: At Least 70 Mm 1 Pcs Detector, Fake Bills Led Display; Led Display Size: At Least 5 Cm Width X 10 Cm Long; Hard Plastic Casing; Ultraviolet (uv) And Magnetic (mg) Sensors; Power Source: Built In Rechargeable Battery,12v Output And Ac 100- 240v Adapter; With Complete Detection; Accessories Includes: Tough Plastic Carrying Case, Power Cord, Cleaning Brush, And Power Charger; User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, 3 Pcs Guest Folio Rack Material: Hard Plastic; Accommodates At Least 50 Room Divider Indexes; With Divider Boards With Metal Tabs; A4 Size Divider; With Metal Sidings 1 Pc Hypercom Memory: 1 Mb Ram (minimum) Lcd Display; 160 X 80 Pixel Graphics (minimum) With Card Reader Magnetic Stripe Pin Pad Port: 4-wire, Rs485; With Peripheral Ports For Pc Connection; Electronic Cash Register Or Journal Printer; With At Least 2400bps Modem; Support Synchronous (sdlc) And Asynchronous, Lan Operation; With Pin Encryption; With Thermal Printer At Least 576 Dots Per Line; Thermal Paper – 2 Inches Wide X 3 Inches Roll Diameter (min.); Keypad: Membrane, 12 Keys, Water-resistant; 1 Pc Key Card Maker With Verifier Set Of Hotel Door Lock System With Management Software; A) 1 Unit - Card Type Door Lock With Inductive Distance At Least 4cm B) 1 Unit - Card Encoder Unit With 25 Pieces Door Room Key Cards Computer Software System For Door Lock And Making Cards With Complete Accessories Including The Usb Type A Cable Interface To The Computer User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment 1 Pcs Key Rack Rack Material: Wood Number Of Racks: Can Accommodate At Least 40 Key Cards Minimum Rack Size: 70mm Width X 110mm Height Depth Of The Rack At Least 50mm Any Color Paint Type:wall Mounted Rack Pack With Shipping Carton Box 1 Pc Safety Deposit Box Vault Material: Metal, Powder Coated, Solid Steel Door Thickness: 4mm(minimum) Body Thickness: 2mm(minimum) Minimum Outer Dimension: L: 30cm X H: 20cm X W: 20cm Electronic Lock System Battery Operated Digital Panel: Requires 4 X ‘aa’ Batteries User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures On How To Use The Equipment, Branded 20 Pcs Speaker, Lapel Frequency At Least 500mhz With Audio Input Connector With Operation Range At Least 50meters Receiver/70ma Earphone Output Level: 32ohm, 65mw Operates With Energizer Battery With Minimum Powerconsumption Of Transmitter At Least 3v/70ma Receiver: 3v/70ma 25 Sets First Aid Kit Type: Emergency Case; Contents: First Aid Quick Reference Guide, 1pc; Sterize Gauge Swab(4 X4 X12 Ply) 100 Pcs/pack, 1 Pack; Adhesive Strips/band -aid, 50 Pcs/pack, 2 Packs; Gloves, Disposable, Medium Size, 2 Pairs; Hypo Allergenic Adhesive Tape, 5cm X 5cm, 2 Rolls; Triangular Bandage/arm Sling, Min 90cm X 90cmx 120cm, 2pcs; Safety Pins, 1 1/4 Inches, (12 Pcs), 1 3/4 Inches (12 Pcs); Stainless Steel Bandage Scissors, 2pcs; Betadine, 60ml, 2 -3 Years Expiration, 2 Bottles; Dust Mask, 2pcs; Hand Towels Or Face Towels, White Color, 6 Pcs; Gauze Bandage, Minimum 5cm X 4cm, 2 Rolls; Antiseptic Handwash/germicidal Soap, 60 Gms , 2pcs; Torniquet, 2 Pcs; Spirit Of Ammonia, 30ml, 2-3 Years Expiration, 1 Bottle; Burn Cream Ointment, 20g To 30g, 2- 3years Expiration, 1 Tube; Medical Tweezers Min. 8cm, Plastic, 2pcs; Plastic Bags, Resealable, Minimum Of 24pcs, 100mm X 180mm, 24pcs, 150mm X 230mm Cotton Balls , 50 Balls In A Sealed Package, 2 Packs Hot And Cold Pack, Reuseable, 1 Pack Water Resistant And Sturdy Case W/ Handle That Can Accommodate All The Listed Items. 4 Pcs Megaphone Battery Operated (4 Pcs - Size D Battery) With Built-in Siren Power Output: 20-watts (minimum) Range: 700 Meters (minimum) With Hand Grip And Carrying Strap Branded With Users Manual That Contains The Specification, List Of Parts, Instruction Guide, Troubleshooting, Safety Instruction. 100 Pcs Whistle Anodized Aluminum;size : Length - 6.5cm X 3cm Diameter; Handy And Lightweight; Loud Whistle Can Be Heard For Far Distance Of 100 Meters; With Key Ring For Attachment 2 Pcs White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform.board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) Wih Plastic Corner Capscomes With Metal Tray For Marker And Eraserthe Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobblewith 4 Lockable Hard Plastic Caster Wheelsoverall Height From Floor: 210 To 214cmsmooth Surface, No Sharp Edges Total Abc 3,978,106.00 2. The Department Of Education – Division Of Tangub City Now Invites Bids For The Above Procurement Project. Procurement Of Learning Tools And Equipment For Technical Vocational Livelihood To Deped-public Schools. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Department Of Education – Division Of Tangub City And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. , Mondays To Fridays Except Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 14, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Lot 1 - Five Hundred Pesos (p500.00) Lot 2 - Five Hundred Pesos (p500.00) Lot 3 - Five Hundred Pesos (p500.00) Lot 4 – One Thousand Pesos (p1,000.00) Lot 5 - Five Thousand Pesos (p5,000.00) Lot 6 - Five Hundred Pesos (p500.00) Lot 7 – One Thousand Pesos (p1,000.00) Lot 8 - Five Hundred Pesos (p500.00) The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees To Be Presented In Person. 6. The Department Of Education – Division Of Tangub City Will Hold A Pre-bid Conference On November 21, 2024, 9:00 Am At Division Office Conference Hall Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before 9:00 A.m. On December 3, 2024. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be December 3, 2024, 9:00 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Bidders Or Its Authorized Representatives Are Encouraged To Attend The Pre-bid Conference To Ensure That They Fully Understand The Procuring Entity’s Requirements. 11. The Department Of Education – Division Of Tangub City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Gina L. Mandawe Head, Bac Secretariat Deped, Division Of Tangub City, Anecito Siete St., Mantic, Tangub City 7214 (088) 530-5988 Depedtangub.bacsec@deped.gov.ph Https://tangub.deped.gov.ph/ 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://tangub.deped.gov.ph/ Erlinda G. Dael, Phd., Cese Assistant Schools Division Superintendent Bac Chair

Details: Description Lot 1 - Foods And Beverages Services Nc Ii 1 200 Pieces Chair Dining Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimension: Total Height - 33" X 15" X 15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality 2 8 Set Coffee Pot, 2 Pints Type: Manual Drip Body Shape: Round Material : Stainless Steel With Cover Capacity : 2 Pints Outside Diameter : 90 -110 Mm Over-all Height : 200 - 230 Mm Thickness : 0.5 - 1 Mm With Handle And Spout Packed In Carton Box The Item Must Have Good Quality 3 20 Pieces Container, Creamer Design: Type: Porcelain With Spout Body Shape: Circular, Material: Porcelain Diameter : 50 - 65 Mm Height : 80 - 105 Mm Color: White Appearance : Glossy White Packed In Carton Box The Item Must Have Good Quality 4 96 Pieces Cups And Saucers 5-6 Oz. 1. Material : Porcelain 2. Capacity : 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color : White 5. The Item Must Be Of Good Quality 5 96 Pieces Fork, Cocktail 1. Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design 2. Type: Rounded Tip Handle 3. Over-all Length: 110-165mm 4. Width: 20-30mm (minimum) 5. Handle Thickness: 2mm To 4mm 6. Handle Length: 75-90mm 7. Small 8. Color: Silver The Item Must Be Branded And Have Good Quality. 6 96 Pieces Fork, Dessert Type: Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design, Rounded Tip Handle Length: 150mm-175mm Width: 20-30mm Handle Thickness: 1.5mm-3mm Number Of Tines: 4 Handle: 130mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 7 96 Pieces Fork, Dinner Type: Dinner Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Over-all Length: 120-175mm Thickness Of Handle: 2-3mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 8 96 Pieces Fork, Fish Type: Fish Fork Body Shape: Fork Shape With Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design Over-all Length: 180-215mm Fork Width: 1.5mm-3mm Fork Thickness: 1mm-2mm Number Of Tines: 4 Length Handle: 120-130mm Handle Thickness: 2mm-3mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 9 96 Pieces Fork, Oyster Type: Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90-120mm Thickness: 1mm-3mm Silver Color With Three Short Wide Curved Tines Packed In Plastic Pouch The Item Must Be Of Good Quality 10 96 Pieces Glass, Champagne Flute Type: Flute Glass Body Shape: Round Material: Clear Crystal Glass Dimension: Height: 20-24cm, Top Diameter: 50-70mm, Bottom Diameter: 60-80mm Capacity: 250ml (minimum) Thickness: 1.5-3mm Packed In Carbon Box The Item Must Have Good Quality 11 96 Pieces Glass, Collins Type: Tumbler Body Shape: Round Material: Clear Glass Capacity: 10oz To 14 Oz Thickness: 1.5-3mm (minimum) Packed In Carbon Box The Item Must Have Good Quality 12 96 Pieces Glass, Juice / Hi-ball 1. Material : Clear Glass 2. Type: Hi-ball 3. Height: 140-160mm 4. Bottom Diameter: 50-70mm 5. Top Diameter: 50-70mm 6. Thickness: 2-4 (minimum) 7. Capacity: 8oz. To 10oz. 8. Dishwasher Safe 9. The Item Must Be Branded And Good Quality Packed In Carton Box 13 96 Pieces Glass, Pilsner (ice Tea Glass) Type: Flaired Rim Body Shape (round Slender) Material: Clear Glass Capacity: 20oz. To 23oz. Over-all Length: 22-25cm Thickness Of Glass: 1-3mm With Flaired Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality 14 96 Pieces Glass, Red Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55-60mm Thickness: 1.5mm-3mm Over-all Length: 200-220mm Capacity: 250-300ml Stem Diameter: 6-8mm Stem Length: 85-90mm Base Diameter: 75-85mm Base Thickness: 2-4mm 15 96 Pieces Glass, White Wine Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55-60mm Thickness: 1.5-3mm Over-all Length: 200-220mm Capacity: 270-300ml Stem Diameter: 6-8mm Base Diameter: 70-80mm Base Thickness: 2-5mm 16 16 Pieces Gravy Boats Type: Steel Type Body Shape: Boat Shape With Handle Material: Stainless Steel Capacity: 5oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Packed In Plastic Pouch 17 8 Sets Ice Bucket, 2 Liters With Tongs Type: Steel Type Body Shape: Circular Set Includes: A. Ice Bucket Material : Stainless Steel Diameter : 140 - 180 Mm Height : 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity : 2 Liters (minimum) The Item Must Have Good Quality 18 96 Pieces Knife Butter 1. Material : Stainless Steel W/ Highly Polished Appearance 2. Over-all Length : 140 Mm - 150 Mm 3. Handle Thickness : 3 Mm - 5 Mm 4. With Dull Edge And Rounded Tip 5. The Item Must Have Good Quality. Packed In Carton Box 19 96 Pieces Knife, Dinner Type: Dinner Knife Body Shape: Flat With Round Tip Material / Appearance : Stainless Steel Blade Highly Polished Handle Material : Stainless Steel Overall Length : 160 - 190 Mm Blade Thickness : 2 - 4 Mm Handle Thickness : 3 - 6 Mm Serrated Blade With Rounded Tip Packed In Carton Box The Item Must Have Good Quality 20 96 Pieces Knife, Fish Type : Fish Knife Body Shape: Flat With Pointed Tip Material / Appearance : Stainless Steel, Highly Polished W/ Plain Design Overall Length : 200 - 220 Mm Width Blade : 20 - 25 Mm Thickness Of Blade : 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Wide Blade, Dull Edge, Tip Made With A Notched Point Color : Silver Packed In Carton Box The Item Must Have Good Quality 21 8 Pieces Menu Folder Type: Leather Menu Folder Body Shape: Rectangular Material: Leather With 2 Partitions And 6 Inserts Size: 31.5cm X 24.5cm Color: Brown/black Applicable Paper Size: A4 22 24 Pieces Napkin Holder Type: Steel Type Body Shape: Rectangular Material : Stainless Steel With Highly Polished Appearance Dimension : Width : 70 - 90 Mm X Length : 150 - 170 Mm , Thickness : 0.7 Mm -2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 23 8 Pieces Order Pads Type: Numbered Pads Body Shape: Rectangular Material : 80 Gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Can Take 1000 Orders Before You Run Out Packed In A Plastic Pouch 24 8 Pieces Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case Food Grade And Nontoxic Must Be Branded 25 32 Pieces Plate Covers Type: Steel Type Body Shape: Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Packed In Plastic Pouch The Item Must Have Good Quality 26 96 Pieces Plate, Dessert, 7” To 8” Type: Plain Type Body Shape: Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color : White Inner Diameter: 145 To 165 Mm Thickness : 3 To 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 27 96 Pieces Plate, Dinner, 10” Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Color: White Inner Diameter : 200 Mm - 215 Mm Outer Diameter : 250 - 260 Mm Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 28 96 Pieces Plate, Fish, 8” To 9” Type: Plain Type Body Shape: Circular Material : Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color : White Inner Diameter : 165 Mm - 190 Mm (minimum) Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 29 32 Sets Round Table (8’s) Type: Foldable Body Shape: Round Material: High Density Polyethylene Tabletop Powder Coated Steel Frame Size: 154cm X 74cm X4.5cm (minimum) Good For 8 To 10 Seater Capacity Tube Size : 28 Mm Diameter X 1 Mm Thickness Packed In A Carton Box The Item Must Have Good Quality 30 96 Pieces Salad Forks Type: Salad Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4 Tines Length: 150 Mm - 175 Mm Thickness Of Handle : 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 31 96 Pieces Salad Knife Type: Salad Knife Body Shape: Semi Rectangular Blade With Pointed Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Overall Length: 145 -160 Mm Blade Thickness: 2 Mm To 4 Mm Handle Thickness: 4 Mm To 6 Mm Handle Material: Stainless Steel Rounded Tip Handle Packed In Carton Box The Item Must Have Good Quality 32 96 Pieces Salad Plates 7” To 8” Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Supply Must Be A Set Consisting Of One (1) Each: 7 Inches And 8 Inches Plates Color: White Diameter (inner): 150 Mm - 165 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 33 16 Pieces Salt And Pepper Shakers Type: Glass Type Body Shape: Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Aluminum Cover Packed In Carton Box The Item Must Have Good Quality 34 8 Pieces Sauce Ladles Type: Spouted Bowl Body Shape: Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 35 8 Pieces Server, Cake 1. Material : Stainless Steel Blade , Highly Polished Appearance 2. Over-all Length : 220 To 270 Mm 3. Width : 60 - 80 Mm 4. Thickness : 1.5 Mm To 2 Mm 5. Handle : 120 -140 Mm Long, Non-toxic Plastic 6. Shape : Shovel-shaped 7. Color : Silver 8. The Item Must Have Good Quality Packed In Carton Box 36 24 Pieces Service Forks Type : Service Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Packed In Plastic Pouch 37 24 Pieces Service Tray Type: Plastic Body Shape: Rectangular Material: Plastic (pp) Size : 14 Inches X 18 Inches X 1 Inch (minimum) Color : Any Packed In Plastic Pouch The Item Must Have Good Quality 38 24 Pieces Show/service/base Plates 11” Type: Plain Type Body Shape: Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches; - 12 Inches; - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces 39 96 Pieces Side Plates Or Bread Plates 6” Type: Plain Type Body Shape: Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness : 3 Mm - 6mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 40 16 Pieces Side Towels Type: Chef's Towel Body Shape: Rectangular Material: Oxford Polyester Soft Cloth Over-all Length : 640 - 680 Mm Over-all Width : 420 -460 Mm Color : Plain White Packed In Plastic Pouch The Item Must Have Good Quality 41 32 Pieces Silver Platter Type: Steel Type Body Shape: Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 42 96 Pieces Soup Bowl Type: Plain With Two Handles Body Shape: Circular Material : Porcelain Capacity : 24 Oz. (minimum) Packed In Carton Box The Item Must Have Good Quality Packed In A Carton Box 43 8 Pieces Soup Ladle Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length : 220 -235 Mm Ladle Bowl Details: 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Handle Details: 145 - 155 Mm Long X 12 - 25 Mm Wide X 1.5 -3 Mm Thick Color: Silver With Hang Hole For Hanging And Easy Access 44 16 Pieces Soup Tureen Type: Steel Body Shape: Round Material: Stainless Steel Capacity: 7 - 11 Quart Size : 60 X 35 X 32 Cm (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 45 96 Pieces Spoon, Dessert Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver Packed In Plastic Pouch The Item Must Have Good Quality 46 24 Pieces Spoons, Service Type : Service Spoon Body Shape: Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 47 96 Pieces Spoons, Soup (cream And Consume) Type: Soup Spoon Body Shape: Round Material/appearance : Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length : 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Shorter Handle : 110 Mm - 170 Mm Thickness : 1.5 Mm - 3 Mm Color: Silver Packed In Plastic Pouch 48 96 Pieces Steak Knife Type: Steak Knife Body Shape: Flat With Serrated Edge Material: Stainless Steel Blade With Wooden Handle Length: 170 Mm To 203 Mm Handle Wood Thickness: 10 - 14 Mm With Serrated Blade Packed In Carton Box The Item Must Have Good Quality 49 20 Pieces Sugar Container Type: Glass Type Body Shape: Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Packed In Carton Box The Item Must Have Good Quality 50 16 Pieces Table Cloth, 54 X 54 Inches Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Color: Plain White Dimension: L 54 Inches X W 54 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 51 8 Pieces Table Cloth, Rectangular Type: Plain Cloth Body Shape: Rectangle Material : Linen Size : 120cm X160cm (minimum) Color : Any Color But Not Black Feature: Washable Packed In A Plastic Pouch 52 120 Pieces Table Napkins, Cloth, 16” X 16” Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Size: L 16 Inches X W 16 Inches (minimum) Color: Plain White Packed In Plastic Pouch The Item Must Have Good Quality 53 8 Pieces Table Skirting Cloth 90” X 90” Type: Plain Cloth Body Shape: Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 54 48 Pieces Table, Square/rectangular (4’s Or 6’s) Type: Foldable Plastic Body Shape: Square/rectangle Material: High Density Polyethylene Tabletop Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Good For 4 Persons Packed In Carton Box The Item Must Have Good Quality 55 8 Pieces Tea Pot, 2 Pints Type: Porcelain Type Body Shape: Round With Handle And Pouring Spout Material : Porcelain Capacity : (2 Pint) Color : White Packed In Carton Box The Item Must Be Of Good Quality 56 96 Pieces Teaspoon Type : Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 57 8 Pieces Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 58 16 Pieces Toothpick Holder Type: Steel Type Body Shape: Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 59 8 Pieces Tray Stand Type: Foldable Body Shape: Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Packed In Plastic Pouch The Item Must Have Good Quality 60 8 Pieces Tray, Bill Folders/change 1. Material : Heavy Duty Plastic ( Abs ) Or Its Equivalent 2. Height : 190 - 220 Mm 3. Width : 120 -140 Mm 4. Thickness : 2 Mm To 3 Mm (minimum) 5. Color: Black 6. With Check And Pen Holder 7. The Item Must Have Good Quality Packed In Plastic Pouch 61 32 Pieces Tray, Round (bar) Type: Plastic Body Shape: Round Material: (pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Packed In Plastic Pouch The Item Must Have Good Quality 62 96 Pieces Water Goblet Type: Water Goblet Body Shape: Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Packed In Carton Box The Item Must Have Good Quality 63 24 Pieces Water Pitcher Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality Lot 2 Cookery Nc Ii And Bread & Pastry Production Nc Ii 1 12 Pieces Apple Corer Type: Apple Corer Body Shape: Tubular Material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Preferably With Packing Case Dishwasher Safe 2 3 Pieces Bain Marie, Table Type: Bain Marie Table (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Source: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60 Hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 3 3 Pieces Blender, Electric Type: Blender Machine Body Shape: Round Jar Material Housing: Plastic (polypropylene) Jar Height : 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220 Volts / 240 Volts,50 Hz / 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades 4 48 Pieces Board, Chopping/cutting, Plastic Type: Cutting Board Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe 5 3 Pieces Boiler, Double Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 6 24 Pieces Braising Pan, Medium Type: Braising Pan Body Shape: Round Material: Enameled Cast Iron And Stainless Steel Size: Diameter: 28 Cm X Height: 10 Cm (minimum) Capacity: 4 Liters (approximate) With Stainless Steel Cover, Solid Cast Stainless Steel Side Handles And Riveted Handle On Both Side: Length: 10 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 7 3 Pieces Can Opener Type: Can Opener Body Shape: Materials: Stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Multi-use: 3 In 1 Can Opener Also Opens Bottle Tops- Can Lids And Tabs 8 12 Pieces Casserole, Medium Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 24 Cm X Height -14 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Preferably With Packing Case 9 36 Pieces Casserole, Small Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 20 Cm X Height -12 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 10 5 Pieces Colander, Medium Type: Colander, Medium Body Type: Round Material: 304 Stainless Steel Diameter: 30 Cm (minimum) Capacity: 8 Quarts (9 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 To 10 Mm 11 12 Pieces Colander, Small Type: Colander (small) Body Shape: Round Material: 304 Stainless Steel Diameter: 26 Cm (minimum) Capacity: 5 Quarts (5.6 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Body Thickness: 0.8 Mm (minimum) Full-ring Support Base, 15 Cm Diameter Preferably With Packing Case Food Grade And Dishwasher Safe 12 24 Pieces Cup, Measuring (for Solid) Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 13 12 Pieces Dispenser, Paper Towel Type Paper Towel Dispenser Body Shape: Rectangular Material: Abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Mounting Style: Wall Mounted Tissue Box 14 3 Pieces Fan, Electric Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names 15 3 Pieces Fire Extinguisher (with Contents) 1. For Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2. Portable Type 3. Capacity: 5-6kgs 4. Rechargeable Cylinder Metal 5. Working Pressure Of Cylinder: 400 Psi 6. Brass Valve With Pressure Gage 7. With Rubberized Hose And Aluminum Nozzle Attached With Squeeze Lever To Discharge And Safety Pin 8. Painted With Metal Primer And Red Enamel Paint 16 3 Pieces Fish Poacher, Medium Type: Fish Poacher Body Shape: Oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12 Cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 17 9 Pieces Fork, Carving Type: Carving Fork Body Shape: Square Shape Prong Prong Material: High Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prong Comes With Square- Shaped Prongs And Pointed Tips Abs Plastic Triple-riveted Handle Preferably With Packing Case 18 24 Pieces Fork, Kitchen Type: Kitchen Fork Body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle :abs Plastic Number Of Tines: 2 Tines With Tapered End 19 6 Pieces Frying Pan, Large Type: Frying Pan (large) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-30 Cm (minimum) X Height- 5.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 20 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 20 24 Pieces Frying Pan, Medium Type: Frying Pan (medium) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-24 Cm (minimum) X Height- 4.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 19 Cm Long (minimum) Preferably With A Packing Case 21 36 Pieces Frying Pan, Small Type: Frying Pan (small) Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-20 Cm (minimum) X Height- 3.8 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 12 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 22 12 Pieces Funnel, S/s, Medium Type: Stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-15 Cm (minimum) X Height- 15.8 Cm (minimum) Tube Diameter: 2 Cm X Length: 7.3 Cm (minimum) Comes With Handle For Easy Hanging Preferably With Packing Case Dishwasher Safe 23 12 Pieces Funnel, S/s, Small Type: Stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case Dishwasher Safe 24 12 Pieces Garbage Bin Type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With A Packing Case Color: Any Color 25 36 Pieces Glass Rack Type: Glass Rack Body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 1/2 Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case 26 6 Pieces Ice Cream Scooper Type: Ice Cream Scooper Body Shape: Round Material: Stainless Steel Scoop: Diameter- 5 Cm X Deep-2.5 Cm (minimum) Handle Length: 10 To 12 Cm 27 24 Pieces Knife, Boning Type: Flexible Boning Knife Body Shape: Ergonomic Material: High Carbon Steel Overall Length: 28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets Preferably Wiht Packing Case Dishwasher Safe 28 30 Pieces Knife, Chef Type: Chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) 29 6 Pieces Knife, Cleaver Type: Cleaver Knife Body Shape: Flat Blade Material: Forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum) Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets 30 12 Pieces Knife, Oyster Type: Oyster Knife Body Shape: Ergonomic Blade Material: Stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) 31 3 Pieces Light, Emergency Emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome 32 3 Pieces Meat Slicer Type: Meat Slicer Body Shape: Circular Housing Material: Die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 33 24 Pieces Pastry Tube Type: Pastry Tubes Body Shape: Tube In Different Shape Of Nozzles Material: Stainless Steel Set Contain: 24 Different Shapes Of Nozzles (minimum) Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Stars, Leaves And Other Designs 34 24 Pieces Peeler, Y-type Type: Y-type Peelers Body Shape: Ergonomic Material: Stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Handle Material: Stainless Steel Handle Length: 4 3/4 Inches X 1 Inch Diameter (minimum) 2 In 1 Design With 2 Blade Reel, Built In Potato Eye Remover And Hole For Hanger 35 24 Pieces Pepper And Salt Mill Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case 36 24 Pieces Piping Bag Type : Piping Bag Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 37 36 Pieces Plate Rack Type: Plate Rack Body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) 38 15 Pieces Preparation Table With Sink Type: Preparation Table With Sink & Shelves Body Shape: Rectangular Material: Stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Tabletop And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) 39 3 Pieces Pressure Cooker Type: Pressure Cooker Body Shape: Round Material: Polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring 40 12 Pieces Roasting Pan Type: Roasting Pan Body Shape: Rectangular Material: Stainless Steel Dimension: Length: 40 Cm X Width-35 Cm X Height -7 1/2cm (minimum) Thickness: 1.5 Mm Thick (minimum) Welded Handles On Both Sides Removable Stainless Steel Wire Rack 41 24 Pieces Scissor, Kitchen Type: Kitchen Scissor Body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum) Width: 7.5 Cm (minimum) 42 24 Pieces Siever, Small Type: Fine Mesh Siever Body Shape: Round Material: Stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Preferably With A Packing Case 43 24 Pieces Skimmer, Fine Type: Medium Fine Mesh Skimmer Body Shape: Round Material: Stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Handle Has Hole For Hanging Preferably With A Packing Case 44 24 Pieces Skimmer, Spider Type: Skimmer, Spider Body Shape: Round Material: Stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm (minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Preferably With A Packing Case Dishwasher Safe 45 36 Pieces, Soup Cup Rack Type: Soup Cup Rack Body Shape: Square Material: Polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm No. Of Compartment: 16 Compartments 46 6 Pieces Soup Ladle, 12 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 34 Cm (minimum) Capacity: 12 Oz. (341 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 47 24 Pieces Soup Ladle, 3 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 48 24 Pieces Soup Ladle, 6 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 6 Oz. (170 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe 49 9 Pieces Soup Ladle, 8 Oz Type: Soup Ladle Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 8 Oz. (236 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case 50 24 Pieces Spatula Type: Offset Spatula Body Shape: Flat Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length: 12 To 14 Inches Preferably With A Packing Case Dishwasher Safe Must Be Branded. 51 24 Pieces Spoon, Kitchen Type: Kitchen Spoon Body Shape: Oval Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe Must Be Branded. 52 24 Pieces Spoon, Kitchen (slotted) Type: Kitchen Spoon Slotted Body Shape: Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe 53 24 Pieces Spoon, Measuring Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 54 24 Pieces Spoon, Parisienne Type: Parisiennes Spoon Body Shape: Round Double Headed Parisiennes Scoop Bar Tool Material: Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Draining Small Hole In The Scoop 55 72 Pieces Spoon, Serving Type: Serving Spoon Body Shape: Oval Materials: Stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 56 24 Pieces Spoon, Wooden Type: Wooden Spoon Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 57 6 Pieces Stock Pot, Large Type: Stock Pot, Large Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. With Aluminum Disc Layer In Bottom For Even Heat (5 Mm Aluminum 58 9 Pieces Strainer Chinois, Small Strainer Chinois, Small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 59 6 Pieces Strainer Chinois, Medium Type: Strainer Chinois, Medium Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 60 24 Pieces Strainer Medium, Fine Type: Strainer, Medium Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded. 61 24 Pieces Strainer Small, Fine Type: Strainer, Small Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded. 62 24 Pieces Tenderizer, Medium Type: Tenderizer Body Shape: Ergonomic Material: Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes Weight: 250 Grams To 500 Grams Preferably With A Packing Case Dishwasher Safe Must Be Branded 63 9 Pieces Thermometer, Pocket/pin Type: Pocket/pen Thermometer Body Shape: Tubular Pen Style Digital Thermometer Product Size: 100 Mm X 40 Mm X 14 Mm (minimum) Display Size: 40 Mm X 20 Mm (minimum) Prove Length: 200 Mm (minimum) Measuring Range: -50 °c To 300 °c (-58 ⁰f To 372 ⁰f) Resolution: 0.1 °c / 0.2 °f 64 24 Pieces Tong, 12 Inches Type: Tong , 12 Inches Body Shape: Standard Material: Stainless Steel Size: 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe Must Be Branded 65 30 Pieces Tong, 8 Inches Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe 66 24 Pieces Tray, Baking, Small Type: Baking Tray Body Shape: Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Preferably With Packing Case Dishwasher Safe Must Be Branded. 67 36 Pieces Tray, Utility Type: Utility Tray Body Shape: Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Finish: Polished Preferably With A Packing Case Washable And Oven Safe 68 24 Pieces Turner 3” X 6” Type: Slotted Turner, 3" X 6" Body Shape: Straight Material: Stainless Steel Blade Size (lx W): 6 Inches X 3 Inches (minimum) Handle Length: 5 Inches (minimum) Overall Length: 13 Inches (minimum) Solid Turner With Straight Slotted Blade Wooden Handle With Triple Rivets Preferably With A Packing Case Dishwasher Safe Must Be Branded 69 3 Pieces Utility Cart Type: Utility Cart Body Shape: Rectangular Material: Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Preferably With A Packing Case Easy Grip Handles On Each End Of Cart 70 12 Pieces Weighing Scale, 1 Kg, Digital Type: Digital Weighing Scale Body Shape: Rectangular Materials: Engineering Plastic And Stainless Steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: L X W X H Mm ) 163 Mm X 245 Mm X 79 Mmm (minimum) 71 6 Pieces Weighing Scale, 5kg Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 72 24 Pieces Wire Skimmer, Small Type: Skimmer, Wire Mesh Body Shape: Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Preferably With A Packing Case Dishwashing Safe Must Be Branded. 73 6 Pieces Wire Whisk, Heavy Duty Type: Wire Whisk, Heavy Duty Body Shape: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 74 24 Pieces Wire Whisk, Medium Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 75 24 Pieces Wire Whisk, Small Type: Wire Whisk, Small Body Shape: Balloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe Must Be Branded. 76 3 Pieces Wok, Medium Type: Wok, Medium Body Shape: Round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded. 77 12 Pieces Wok, Small Type: Wok, Small Body Shape: Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Preferably With A Packing Case Dishwashing Safe Must Be Branded. 78 6 Pieces Working Table Type: Working Table, Stainless Steel Body Shape: Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Fully Welded Construction Thickness: Gauge 16 (1.29 Mm Thick) Minimum Stainless Steel Table Top With Stainless Steel Undershelf Distance Between Table Top And Undershelf Is 650 Mm (minimum) Preferably With A Packing Case Or Crate No Sharp Edges And Rough Surfaces Must Be Branded. 79 24 Pieces Zester Type: Cheese Zester Body Shape: Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe The Plastic Material Used Must Be Non-toxic Must Be Branded. Bread And Pastry Production Nc Ii 1 2 Set Air Compressor With Airbrush Cake Decorating Set Tight-tolerance Head Provides Extremely Fine Atomization With Razor-sharp Detail Needle Backstop At The Rear Of The Airbrush Allows You To Pre- Set The Trigger Travel, Producing Consistent Line Widths Includes Pre-installed 0.2mm Nozzle (tip), Nozzle Cap, Needle, And Removable Needle Cap For A Spray Pattern Between Hairline And 3/4″ (20mm) Fine-finish, Stainless-steel Needle Minimizes Tip-dry Gravity-feed 2cc Color Cup Won’t Obstruct Your View During Fine Detail Work Solvent-resistant Needle Packing Allows Safe Use With All Types Of Spraying Mediums Uses Standard 1/8″ Bsp Air Hose Fittings 2 12 Pieces Beater 3 12 Pieces Board, Chopping, 6 Color The Item Shall Have The Following Specifications: 1) Material: Polypropylene, Food Grade 2) Board Size: Length: 18 Inches 3) Width: 12 Inches 4) Thickness: 0.75 To 1 Inch 5) Color: Assorted Colors, 6 Different Colors Per Set 6) With Hole For Storage Purposes 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 4 2 Pieces Boiler, Double Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 5 24 Set Bowl, Mixing (6 Pieces/set) 6 12 Pieces Cake Pans, Round #4, #6, #8, #10, #12, #14, #16 7 12 Pieces Cake Stand, With Tier Type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tier Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3 : 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Assembled Column Is Used For Maximum Strength And Stability Of The Stand Must Be Packed In Set Smooth And No Sharp Edges 8 6 Pieces Cake Turn Table Type: Turn Table Body Shape: Circular Material: Cast Aluminum Plate And Cast Iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm Turntable With Ball Bearing To Turn Easier Preferably Packed In Any Kind Of Packaging Comes With No Sharp Edges To Rotate Smoothly In 360 Degrees Clockwise Or Counter Clockwise 9 26 Pieces Coupler Type: Food Grade Body Shape: Tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case The Materials Used Must Be Non-toxic And Dishwasher Safe 10 24 Pieces Cup, Measuring (for Solid) Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 11 24 Pieces Cup, Measuring, 250ml For Liquid Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 12 24 Pieces Cup, Measuring, 500ml For Liquid The Item Shall Have The Following Specifications: 1) Material: Clear, Non-porous Glass 2) Food Grade 3) Freezer And Microwave Safe 4) Holds 500 Ml, With 25 Or 50 Ml Increment And With Specified Metric And English System Of Measurement 5) With Handle & Spout For Easy Pouring 6) With Permanent Graduation Markings 7) Item Must Be Branded 13 2 Pieces Cutter, Dough Type: Scrapper Body Shape: Straight Blade Material: Stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Length : 15 Cm X Width: 11 Cm X Thickness: 1.2 Mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage 14 12 Pieces Cutter, Pie The Item Shall Have The Following Specifications: 1) Blade Material: 2 Mm (minimum) Stainless Steel 316 2) Cuts 8 Even Slices, With Handle On Both Sides 3) Diameter: 26 Cm 4) Food Grade 5) The Materials Used Must Be Non-toxic. 6) The Item Must Be Branded. 15 12 Pieces Flour Sifter, Hand Cranked Type: Hand Cranked Body Shape: Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm (minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh # 30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Spring Action Squeeze Handle Stainless Steel Preferably With A Packing Case Dishwasher Safe 16 12 Pieces Grater Type: Four Sided Box Grater Body Shape: Box In Shape Material: Stainless Steel Blade And Plastic (polypropylene Handle) Grater Dimensions: Height- 25 Cm X Width-13 Cm X Depth-10 Cm (minimum) Side 1: Large-hole Shredder With 6 Mm Hole Side 2: Slicer Side 3: Small-hole Shredder With 3 Mm Hole Side 4: Grater With Strips About 1.27 Cm To 2.54 Cm Length Preferably With Packing Case Food Grade & Dishwashing Safe 17 12 Pieces Knife, Kitchen The Item Shall Have The Following Specifications: 1) Material: Stainless Steel Blade 2) Handle Material: Hard Plastic ( Polypropelene) 3) Overall Length: 10 Inches (minimum) 4) Blade Length: 5 Inches (minimum) 5) Handle Length: 5 Inches (minimum) 6) Thickness Of Blade: 1/8 Inches (minimum) 7) Blade Width: 1.5 Inches (minimum) 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 18 12 Pieces Knife, Pallet The Item Shall Have The Following Specifications: 1) Blade Material: Stainless Steel 316 2) Handle Material: Hardwood (smooth Finish) 3) Blade Dimension 4) Length= 7 .5 Inches (minimum) 5) Width = 1.5 Inches (minimum) 6) Thickness Of Blade: 3/16 Inches (minimum) 7) Total Length = 12 To 14 Inches 8) The Item Must Be Branded. 19 12 Pieces Ladle, 3 Oz. Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe Must Be Branded 20 12 Pieces Loaf Pan Big The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Length: 15 Inches (minimum) 4) Width: 4 1/2 Inches (minimum) 5) Depth: 4 Inches (minimum) 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 21 12 Pieces Loaf Pan, Medium The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Length: 12 Inches (minimum) 4) Width: 4 1/2 Inches (minimum) 5) Depth: 4 Inches (minimum) 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 22 12 Pieces Loaf Pan, Small The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Length: 8 Inches (minimum) 4) Width: 4 1/2 Inches (minimum) 5) Depth: 4 Inches (minimum) 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 23 12 Pieces Muffin Pan, Big The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Cup Diameter (top): 3 7/8 Inches 4) Length: 13.75 Inches (minimum) X Width: 10.5 Inches (minimum) X Depth: 2 Inches (minimum) 5) Number Of Cups In A Tray: 6 Cup 6) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 7) Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 24 12 Pieces Muffin Pan, Medium The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Cup Diameter (top): 3 1/4 Inches 4) Length: 13.75 Inches (minimum) 5) Width: 10.5 Inches (minimum) 6) Depth: 1 1/2 Inches (minimum) 7) Number Of Cups In A Tray: 12 Cup 8) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 9) Food Grade 10) The Materials Used Must Be Non-toxic. 11) The Item Must Be Branded 25 12 Pieces Muffin Pan, Small The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 2/32 Inch (minimum) 3) Depth: 1.13 Inches (minimum) 4) Length: 20.63 Inches (minimum) 5) Width: 14.13 Inches (minimum) 6) Number Of Cups In A Tray: 24 Cup 7) Cup Diameter (top): 2 3/4 Inches 8) Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges 9) Food Grade 10) The Materials Used Must Be Non-toxic. 11) The Item Must Be Branded. 26 12 Pieces Pie Pan, 10 Inches Diameter The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 1/16 Inch (minimum) 3) Depth: 3 To 5 Inches 4) Set Must Each Contain The Following Volume Capacities: 6inches - 1.5 Liters (minimum) 8inches - 2.1 Liters (minimum) 10inches - 2.6 Liters (minimum) 12inches - 3.3 Liters (minimum) 14inches - 3.7 Liters (minimum) 16inches - 4.2 Liters (minimum) 5) Rolled Edge For Better Strength And Smooth Surface With No Sharp Edges 6) Food Grade 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded. 27 12 Pie Pan, #6, #8, #10 The Item Shall Have The Following Specifications: 1) Material: Anodized Aluminum 2) Thickness: 1/16 Inch (minimum) 3) Depth: 3 To 5 Inches 4) Set Must Each Contain The Following Volume Capacities: 6inches - 1.5 Liters (minimum) 8inches - 2.1 Liters (minimum) 10inches - 2.6 Liters (minimum) 12inches - 3.3 Liters (minimum) 14inches - 3.7 Liters (minimum) 16inches - 4.2 Liters (minimum) 5) Rolled Edge For Better Strength And Smooth Surface With No Sharp Edges 6) Food Grade 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 28 12 Pieces Pillars, Cake The Item Shall Have The Following Specifications: 1) Material: Crystal Clear Fiber Plastic, Food Grade 2) Tube Diameter: 2.5 Cm (minimum) 3) Base And Top Diameter: 3.5 Cm (minimum) 4) Height: 13 Cm (minimum) 5) Four ( 4 )pcs Per Set. 6) The Materials Used Must Be Non-toxic. 7) The Item Must Be Branded. 29 50 Pieces Piping Bag The Item Shall Have The Following Specifications: 1) Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries 2) Food Grade 3) Length: 9 Inches Minimum 4) Width: 3 Inches (minimum) 5) Volume: 1 Liter (approximate) 6) The Materials Used Must Be Non-toxic. 7) The Item Must Be Branded. 30 8 Pieces Rectangular Pan, 1 X 8 The Item Shall Have The Following Specifications: 1) Material: Aluminum 2) Thickness : 1/16 Inch (minimum) 3) Dimensions: # 8 : 11 Inches X 7 Inches X 2 Inches 4) Oven Safe To 500°f / 260°c 5) Food Grade 6) The Materials Used Must Be Non-toxic. 7) The Item Must Be Branded. 31 12 Pieces Rolling Pins The Item Shall Have The Following Specifications: 1) Material: Hardwood (solid Wood In Natural Color) 2) Dimensions: 2.36 Inches Diameter X 9.45 Inches Length 3) 1.57 Inches Root Diameter X 2.76 Inches (approximate Dimensions) 4) Handle Length: 3.15 Inches 5) Smooth Surface Finish With No Sharp Edges 6) Smooth Rotation Of The Revolving Barrel 7) Materials Used Must Be Food Grade 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 32 12 Pieces Rubber Scraper The Item Shall Have The Following Specifications: 1) Material: Silicone Blade (head) & Plastic Handle, (polypropylene ) 2) Color: Any Color 3) Head Length: 11.5 Cm (minimum) 4) Head Width: 7.0 Cm (minimum) 5) Handle Length : 24 To 30 Cm 6) Safe Working Temperature : -40°f To 446°f 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 33 12 Pieces Sauce Pan The Item Shall Have The Following Specifications: 1) Material: Stainless Steel 2) Diameter: 16 Cm 3) Height: 8 Cm 4) With Stainless Steel Cover 5) Welded Handle (insulated) : 15 To 17 Cm 6) Thickness: 1.8 To 2 Mm 7) The Materials Used Must Be Non-toxic. 8) The Item Must Be Branded 34 12 Pieces Sheet Pan The Item Shall Have The Following Specifications: 1) Material: Aluminum 2) Thickness: 1/16 Inch (minimum) 3) Length: 17 Inches (minimum) 4) Width: 12 Inches 5) Height: 3/16 Inches (minimum) 6) Smooth Finish Surfaces Without Sharp Edges 7) Corrosion Resistant 8) Superior Heat Conduction 9) Oven Safe To 500°f / 260°c (maximum) 10) Heat Resistant 11) Food Grade 12) The Item Must Be Branded. 35 50 Pieces Spoon, Measuring Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 36 12 Pieces Spoon, Wooden The Item Shall Have The Following Specifications: 1) Material: Beechwood Or Equivalent 2) Length :12 Inches (minimum) 3) Width: 2.6 Inches (minimum) 4) Depth = 1.0 Inch (minimum) 5) No Hole Or Slot Within The Spoon Bowl 6) Smooth Surface Finish With No Sharp Edges 7) Handle With Hole For Hanging Storage Purposes 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 37 12 Pieces Strainer The Item Shall Have The Following Specifications: 1) Material: Stainless Steel Frame 2) Thickness Of Frame: 1/16 Inch Diameter (minimum) 3) Handle: Stainless Steel 4) Basket Material: Stainless Steel Wire Mesh, Very Fine Mesh 5) Diameter: 8 Inches (minimum) 6) Half-rounded Mesh 7) Smooth Surfaces With No Sharp Edges 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded. 38 40 Pieces Tip, Decorating The Item Shall Have The Following Specifications: 1) Materials: Stainless Steel 2) Tube Height: 1 To 1.25 Inches 3) Tube Diameter: 0.7 To 1 Inch 4) Tube Tip: Assorted Designs 5) Wall Thickness: 1/32 Inch (minimum) 6) Tube Shape: Conical 7) The Materials Used Must Be Non-toxic 8) The Item Must Be Branded 39 12 Pieces Weighing Scale, 10kgs The Item Shall Have The Following Specifications: 1) Material: Aluminum Pan And Metal Body (coated) 2) Color: Any Color 3) Mechanism Type: Spring Lever 4) Capacity: 10 Kg / 22 Lb. 5) Sensitivity/graduated By 10 Gm 6) Measurement Units: Gram/kilogram 7) Manual Setting On Zero, Must Be Accurate And Durable 8) The Materials Used Must Be Non-toxic. 9) Delivery Must Include Correct Instruction Manual Written In Good English 10) Warranty Period Of 1 Year 11) The Item Must Be Branded 40 12 Pieces Weighing Scale, 5kgs, Digital The Item Shall Have The Following Specifications: 1) Materials: Engineering Plastic 2) Capacity: 5 Kg 3) Accuracy: 1 Gram 4) Four-digit Lcd Display 5) Auto Power Off 6) Size: ( L X W X H Cm ) 24 Cm X 17 Cm X 4 Cm 7) Battery Operated, Two Aaa Batteries 8) Warranty Period Of 1 Year 9) The Item Must Be Branded. 41 12 Pieces Wire Whisk, Medium The Item Shall Have The Following Specifications: 1) Material - Stainless Steel 2) Overall Length - 12 Inches (minimum) 3) Depth - 3 Inches (minimum) 4) Whip Length: 7 Inches (minimum) 5) Diameter Of Wire: 2/32 Inches (minimum) 6) Handle Length: 5 Inches (minimum) 7) Number Of Looped Wire = 6 (minimum) 8) The Materials Used Must Be Non-toxic. 9) The Item Must Be Branded Lot 3 Hairdressing Nc Ii 1 2 Pieces Body Brush, Prosthetic Material: Stiff Nylon Bristle Size: At Least 41.8 Cm X 6.5 Cm (over-all Size) Brush Height: 8mm(minimum) With Wooden Handle 2 2 Pieces Bowl, Mixing, Plastic Material: Plastic Inner Diameter: 10.5 Cm (minimum) Height: 6cm (minimum) Thickness Is 2mm (minimum) Any Color Non-toxic 3 4 Pieces Bowl, Shampoo Bowl Material: Abs Plastic With Adjustable Stand (height: 39 Inches To 54 Inches) Minimum Bowl Dimensions: 19 Inches(l) X 20 Inches(w) X 10 Inches(h); With Sealed Foam Rubber Neck Rest For Shampoo Bowls With Hose Attachment Of 7 Ft. Long(minimum) Stainless Steel Frame Portable Type Packed With Shipping Carton Box Branded 4 2 Pieces Box, Hairpin Material: Plastic Bristle Paddle Brush Type Wooden Handle Minimum Width: 2 Inches Non Toxic Packed With Protective Carton Box 5 2 Pieces Brush, Applicator Material: Plastic Non-toxic Size: Small=190mm Length Medium=270mm Large=300mm Handle Width:70mm (minimum) Width Of Tip: 80mm (minimum) With Hair Coloring Dyeing Board Packed With Plastic Pouch 6 2 Pieces Brush, Hair Material: Plastic Bristle Paddle Brush Type Wooden Handle Minimum Width: 2 Inches Non Toxic Packed With Protective Carton Box 7 2 Pieces Cap, Frosting, With Hook Cap Material: Silicone Type: Reusable, Perforated Cap One Size Fits All Or At Least 31cm X 22cm With Pre-cut Tipping Guides With Bleed Proof Inner Liner With A Rounded Metal Hook To Pull Hair Through The Ready Made Perforations Packed With Plastic Pouch 8 2 Pieces Cap, Heating Waterproof Cloth Material. Cordless Type To Fit An Average Size Head (21-24 Inches) Stretch Up To 29 Inches Unisex Hair Care Treatment Styling Reversible And Reusable, Non Toxic Includes With User's Guide In English That Contains: A. Diagram Of The Parts With Their Names B. Operating Procedure On How To Use The Equipment C. Safety Precaution When Using The Equipment Basic Troubleshooting And Maintenance Procedure 9 2 Pieces Cape Polyester Cloth Size: At Least 125 Cm X 140 Cm Hairstyling Type Non Toxic Packed With Plastic Pouch 10 6 Pieces Chair, High Bar Stool Material: Metal, Painted With Anti Rust Width Of The Chair:15 Inches Minimum Height :33 Inches (minimum) Synthetic Leather Seat Material Barstool Crown Back Type With Rubber Ring Of Barstool For Anti Skidding 11 12 Pieces Chair, Hydraulic Material: Metal Base Size:length59 Cm, Width54 Cm, Height From 51-78cm Hydraulic Pump Can Be Up And Down By Pedaling Load Capacity:180kg Hydraulic Styling Chair Type Heavy Duty Hydraulic Pump For Height Adjustable And 360' Rotation Hydraulic Pump Build In For Adjusting The Seating Height. With Foot Rest 12 2 Pieces Clamp Material: Plastic Overall Length: 9.5cm Thickness:10mm(minimum) Hairstyling Clamp Type 13 2 Pieces Clamp, Duck Bill Material: Metal Length: 11 Cm (minimum) High Elasticity Stainless Steel Spring. Nonslip Handle Packed With Plastic Pouch Branded 14 2 Pieces Clipper, Hair Body Material: Hard Plastic Blade Material: Carbon Steel Capacity:6 Watts (minimum) Complete With Blade Guard And 4 Comb Attachments (#1, #2, #3, #4) Motor: Magnetic Type, Corded,12v Ac/dc Adaptor Delivers 1,400 Strokes Per Minute, With Complete Accessories Including The Cleaning Brush With Cord 2 Meters Length Minimum With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures, Packed With Protective Carton Box Branded 15 2 Pieces Comb, Afro Material: Plastic Size: Overall Length At Least 7 Inches Width: 3.25 Inches(minimum) Number Of Teeth: 12 Teeth (minimum); Teeth Height: 2.5 Inches Long (minimum) 16 2 Pieces Comb, All Purpose Material: Plastic Size#3 Or At Least 18 Cm Long (minimum) Has Both Fine And Medium Teeth Position On One Side Only Height Of The Teeth: 2 Cm (minimum) Non Toxic Packed With Plastic Pouch 17 2 Pieces Comb, Haircutting Material: Hard Plastic Length Including The Handle:180mm (minimum) Width: 30mm (minimum) With Detachable Steel Blades And Blade Holder With Two Sides For Different Cuts With Extra Blades 18 2 Pieces Comb, Large Toothed Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length Non Toxic Packed With Plastic Pouch 19 2 Pieces Comb, Tail Material: Plastic Size : 8 Inches(l)minimum X 1 Inches (w) Minimum Tail Length: 4 Inches(minimum) Tooth Length: 3/4 Inch(minimum) Packed With Plastic Pouch 20 2 Pieces Comb, Teasing Material: Plastic With 2 Rows Of Teeth 1st Row: Large Teeth With At Least 25 Mm Long 2nd Row: Small Teeth With At Least 19 Mm Long Over-all Comb Size: 20 Cm (l) Minimum X 3.8 Cm (w) Minimum Non Toxic Packed With Plastic Pouch 21 2 Pieces Comb, Wide Tooth Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length 22 12 Pieces Crimpers Power: 25 Watts(minimum) Size: At Least 38 Cm X 15.5 Cm X 9 Cm Maximum Temperature: 200 Degrees Centigrade With Variable Heat Setting. With On/off Switch Button Rated Voltage: 110 -230volts Ac With Power Cord With Plastic Handle 23 12 Pieces Curling Iron Ceramic Curling Iron Capacity: 65watts Voltage: 210-240volts Ac With Power Cord Barrel Size: 1 Inch (minimum) Adjustable Heat Setting With Maximum Temperature Of 200 Degrees Centigrade Swivel Cord Up To 360 Degree 24 2 Pieces Drip Pan Material: Hard Plastic Size: At Least 17.5 X 25.8 X 1 Inches Thickness: 1/8 Inch (minimum) Shallow Rectangular Type Packed With Carton Box 25 12 Pieces Dryer, Hair Power: 1000w Rated Voltage: 220vac At Least (l X W X H): 18.5cm X 16cm X 6.5cm With Plastic Handle Design Packed With Carton Box With Styrofoam Holder With User's Manual In English Which Includes: A. Parts Manual With Labels B. Assembly Instructions 26 2 Boxes Gloves, Disposable Material: Plastic Size: At Least 25cm X 23cm Packaging Is 100 Pcs Per Box 27 2 Pieces Gloves, Rubber Size: Medium Thickness: 4 Mil Acid Resistant Packed With Plastic Pouch In Pairs. 28 2 Pieces Gown, Smock Material: Polyester Sizes: 1 Piece = Small Size, At Least (50 Inches X 56 Inches); 1 Piece= Medium Size, At Least (52 Inches X 58 Inches); 1 Piece= Large Size, At Least (54 Inches X 60 Inches); Packed With Plastic Pouch Per Size 29 2 Pieces Hairclips Material: Metal Size: At Least 67mm X 19mm Noncorrosive Packed With Plastic Pouch 30 2 Pieces Hairnet, Invisible Material: Nylon Size: 55mm (minimum) Stretchable And Unisex Type Color: Black Non Toxic Packed With Plastic Pouch 31 2 Pieces Headband Size: 6 Inches (minimum) Woven Crochet Tube Top Headband Very Stretchy, Soft Material, Comfortable And Breathable 32 2 Pieces Headband, Flannel Flannel Cloth Size : At Least 45 Cm (unstretched Circumference) Width: 8 Cm (minimum) 33 2 Pieces Infrared Iron Material: Ionic Ceramic Tourmaline-infused Plates And Abs Plastic Body Power: 70 Watts (minimum) Power Rating: 220-240 Volts Ac; Over-all Size: 24 Cm Long (minimum) Heating Plate Size Up To 50 Mm Heating Time: Within 30 Seconds; Variable Heat Settings: From 250 To 450 Degrees Fahrenheit With Digital Temperature Control Safety Mode: Auto Shut Off After 60 Minutes; With Swivel Cord Comes With Storage Pouch Branded 34 20 Pieces Mirror, Hand Mirror Size 15 Cm Diameter (minimum) Frame Thickness Including Mirror Glass: 6.5mm(minimum) Over-all Length With The Handle Is 20 Cm (minimum) Clear Mirror With No Distortion Frame And Handle Are Made Of Plastic Plane Mirror Type Packed With Carton Box With Styrofoam Protection 35 2 Pieces Mirror, Modular Mirror Type: Plain Mirror Mirror Material: Glass Frame Material: Aluminum (cut To Fit) Dimensions (hxw): 75 Cm X 65 Cm (minimum) Mirror Thickness: 6mm (minimum) 36 2 Pieces Prong Clip, Double Material: Steel Nickel Or Chrome Base Plated Size: 45 Mm Minimum Hairstyling Clip Type Packed With Plastic Handle 37 2 Pieces Prong Clip, Single Material: Steel, Plated Size: 55 Mm (minimum) Type: Single-prong Clip Packed With Plastic Pouch 38 2 Pieces Razor, Straight Blade Material: High Carbon Steel Type: Foldable Straight Razor, Replaceable Blade; Dimensions (lxw): 14 Cm X 2 Cm (minimum) When Folded; Compatible With Double-edged Razor Blades; Package Includes 10 Pieces Blade/box Noncorrosive Branded 39 2 Pieces Roller Pins Material: Metal Size: 60mm Long (minimum) Application: Hair Roller Pins Quantity By Dozen (12 Pieces) Noncorrosive Packed With Plastic Pouch 40 2 Pieces Rollers, Jumbo Material: Plastic Approximately 44mm In Diameter X 64mm Long 41 2 Pieces Rollers, Large Size Material: Plastic Size: At Least 40mm Diameter X 60mm Long Hairstyling Type Packed With Plastic Pouch 42 2 Pieces Rollers, Medium Size Material: Plastic; Diameter: 38 Mm(minimum) Length: 58mm (minimum) Hairstyling Type Packed With Plastic Pouch 43 2 Pieces Scissor, Cutting Material: Stainless Steel Total Length: 17cm (minimum) Blade Width At Least 10 Cm Noncorrosive Packed With Plastic Pouch Branded 44 2 Pieces Scissor, Thinning Blade Material: High Carbon Steel Blade Length At Least 6cm With Straight Blade Type Style: Right-handed Scissor Total Length At Least 17cm One Side Comb Cutter Noncorrosive Packed With Plastic Pouch Branded 45 2 Pieces Scoop Material: Plastic Capacity:1/2 Cup (minimum) Rounded Edges With Handle Thickness: 1.5 Mm (minimum) 46 4 Pieces Shower Cap Material: Plastic Size: One Size Fits All Or 30cm Reusable And Waterproof Packed With Plastic Pouch 47 2 Pieces Spatula Material: Plastic Dimension: Over-all Length Of 7.5 Cm Long, X 1.5 Cm Wide (minimum) Application: Hair Waxing Removal Packed With Plastic Pouch 48 2 Pieces Spray Gun Material: Transparent Plastic Capacity: 300ml (minimum) Trigger Type Sprayer Dimension: At Least Diameter Of Bottom Is 7 Cm And The Height Is 17cm 49 2 Pieces Steamer, Hair Power 450 Watts (minimum) Rating Is 220 Volts/50-60hz Hood Material: Polycarbonate Hood Has At Least 30 Cm Diameter Opening X 25 Cm Deep Timer Setting Is Up To 60 Minutes With At Least 32-ounce Water Reservoir Adjustable Height From 100 To 150cm With At Least 5 Swivel Casters With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Operating Procedures, Branded 50 12 Pieces Stool Material: Metal, Electroplated Load Capacity: 150kg Design: Swivel Stool With Backrest With Hydraulic Lift To Adjust Height Freely. With Thick Sponge Cushion. With At Least Four Caster Wheels. With Thick Sponge Cushion. Swivel Stool With Backrest No Sharp Edges Branded Housekeeping Nc Ii 1 2 Pieces Alarm Clock Alarm Clock, Digital, Overall Dimensions: 13.5 X 8 X 4.5 Cm (approx.) Material: Plastic (pe/abs) Illuminated Lcd Digital Display: Time (12/24), Calendar (mm/dd), Temperature, Alarm Status (on/off), Snooze Display Size: 10 X 5 Cm (minimum), Time Can Be Read 30 Ft Daytime. Runs On Aaa Battery Which Come Together With The Item Smooth Surface, No Sharp Edges, Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting. 2 50 Pieces Apron, Polyester-cotton Bib Apron, Sleeveless Adjustable Neck Loop Material: Polyester - Cotton Fabric Dimension: 70 To 60 Cm (minimum) With 2 Or 3 Pockets Uni-color, Dark No Sharp Edges And Loose Threads 3 10 Pieces Baskets, Laundry 3 - Bag Laundry Sorter, With Wheels Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook Bag Dimensions: Rectangular 22 X 15 X 8 Inch (minimum) Frame Material: Corrosion Resistant Steel, Sturdy No Wobble Frame Overall Dimensions: Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2-inch Diameter (minimum) Smooth Surface, No Sharp Edges 4 2 Pieces Bed, Queen Bed Set, Queen Size (60 X 75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Headboard, Bare Weight: 20 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. No Sharp Edges 5 2 Pieces Bed, Single Bed, Single Size (w36 X L75 Inch) Rectangular 1) Frame: Knock-down Type, All Steel, Powder Coated Including Head Board, Bare Weight: 13 Kg (minimum) No Wobble And Noise 2) Comes With Fabric Covered Foam 6 Inches Thick Foam Density: 29 -33 Kg/cu.m. No Sharp Edges 6 2 Pieces Board, Ironing Type: Foldable Type Ironing Board Body Shape: Standard Material: 25 Mm Tubing Approx., 0.8 Mm Thickness Board Size: 32 Inches (minimum) Body Size :120 Cm X 30 Cm X 5 Cm Color: Any Comes With Box No Sharp Edges 7 20 Pieces Boots, Safety, Plastic Upper Material: Elastic Pvc Sizes: 7inches - 5pcs 8inches - 5 Pcs 9inches - 5 Pcs 10inches - 5 Pcs 11inches - 5 Pcs Height: 13 To 14 Inches Plain Toe Type Of Boots: Unisex Rain Boots With Rugged Tractor Lug Outsole Packed With Carton Box Per Size 8 10 Pieces Brushes, For Housekeeping Brush, Floor Scrubbing, Angled Long Handle Bristle Material: Plastic, Stiff Handle Material: Metal Tubular Corrosion Resistant, Overall Length : 120 Cm. (minimum) Bristle Length: 5 Cm (=/- 1cm) Scrubbing Surface: 25 X 6 Cm (+/-1 Cm) No Sharp Edges 9 10 Pieces Buckets, Water Water Bucket Bucket Material: Hard Plastic, Round Body Capacity: 10 To 12 Liters Handle Material: Steel Smooth And Glossy Surface, No Sharp Edges 10 2 Pieces Caddy, Toilet Carrying Caddy For Toilet Cleaning Supplies Holds Spray Bottles And Other Cleaning Supplies, No. Of Compartments: 3 (minimum) Material: Plastic Tray Depth: 11 Cm (approx.) Overall Dimension: 36 X 26 Cm (approx.) Smooth Surface, No Sharp Edges 11 2 Pieces Carpet Sweeper Carpet Sweeper, Cordless Electric Motorized Single Brush Roll (removable) Body Material: Hard Plastic, (abs) Or Its Equivalent, Any Color Equipped With Rechargeable Battery (16 Minutes Run Time On Carpet), Removable Dirt Box Sweep Width: 8 Inches (minimum) Capacity (volume): 0.35 Lit.(minimum) Handle: Metal, Powder- Coated, With Plastic/rubber Grip, Swivel Steering Assembled Height: 44 Inches (minimum) Comes With Battery Charger 220/240vac, 50/60hz With Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) No Sharp Edges Includes User's Manual Which Contains Operation Procedure, Name Of Parts, Safety Precautions, Trouble Shooting. 12 2 Pieces Cart, For Housekeeping Nc Ii Housekeeping Cart Trolley Equipped With Three-shelves With Steel/laminated Panels Single Door, Top Layer With Divider, Bag Holder, And 4 Wheels Cart Frame: Steel, Powder Coated Wheels: 2non-swivel 2 Swivel, 6 Inch Diameter, Non-markings Overall Dimensions: Rectangular 90 X 48 X 1010 Cm (minimum) Comes With Accessory Linen Bag Smooth Surface, No Sharp Edges 13 20 Pieces Cleaning Cloths, Lint-free Lint Free Cleaning Cloths Material: Cotton Dimensions : Rectangular 16 X 26 Inch 14 2 Pieces Coffee Maker Coffee Maker, Electric Material: Metal, Plastic, Glass Capacity: 6 Cups (minimum) Detachable Tank, With Water Level Indicator Non-stick Warming Plate: Removable And Washable Filter Non-drip Valve: Lighted On/off Switch Power Supply: 220 V -240 V Ac 50/60 Hz, 500w Minimum Comes With A Heat-resistant Glass Pitcher With A 1-meter (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item Comes With English Manual That Contains Users Guide, List Of Parts, Maintenance Guide, Safety Guide 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. 15 10 Pieces Dustpan Dustpan, Upright Standing Material: Plastic Overall Length: 65 Cm (minimum) Pan: Round Back, 24 X 26 X 9 Cm (minimum) Smooth Surface, No Sharp Edges 16 10 Pieces Duster, Anti-static Anti-static Duster Duster Material: Polypropylene Micro Fiber Duster: Length : 30 Cm (minimum), Overall Length: 50 Cm (minimum) Handle Material: Hard Plastic, No Sharp Edges 17 4 Pieces Fan, Electric Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 1 Year Warranty Parts And Service 18 6 Pieces Fire Extinguisher (with Contents) 1. For Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2. Portable Type 3. Capacity: 5 - 6 Kgs 4. Rechargeable Cylinder Metal 5. Working Pressure Of Cylinder: 400 Psi 6. Brass Valve With Pressure Gage 7. With Rubberized Hose And Aluminum Nozzle Attached 8. With Squeeze Lever To Discharge And Safety Pin 9. Painted With Metal Primer And Red Enamel Paint 10. Includes With User's Guide In English That Contains: A. Operating Procedure On How To Use The Equipment B. Safety Precaution When Using The Equipment C. 11. 1 Year Warranty Parts And Service 12. The Item Must Be Branded And Have Good Quality 19 10 Pieces Flashlight 11 Flashlight Led 12 1,000 Lumens (minimum), Color: White, Battery: Rechargeable, At Least 3,500 Mah , Can Be Used Also With 3 X Aaa Batteries; Body: Aluminum Alloy, No Sharp Edges 13 Dimensions: 5 Inches X 1 Inch Diameter (minimum) 14 Operating Duration Of Battery When Fully Charged: At Least 2 Hours; Includes 220/240vac, 50/60hz Power Adapter /charger And User's Manual In English Which Includes: 15 A. A Diagram Of The Parts With Their Names, 16 B. Operating Procedures On How To Use The Equipment, 17 C. Safety Precautions When Using The Equipment, 18 Basic Troubleshooting And Maintenance Procedures Branded, With 1 Year Warranty 20 2 Pieces Flat Iron Clothes Flat Iron, Electric Material: Metal /plastic Body, Heat-resistant Plastic Handle, Aluminum Sole Overall Dimension: (l X W X H) 25 Cm X 12 Cm X 12 Cm (minimum) Power Rating : 220/240 Vac, 50/60 Hz; 1000 Watts (minimum) Equipped With Light Indicator, Variable Temperature Control, Overheat Protection, Power Cord And Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges, Comes With English Manual That Contains: Users Guide, List Of Parts, Maintenance Guide, Safety Guide. The Item Must Be Branded, With Dti-bps Certification 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. 21 20 Pieces Foam, Scrubbing 9. Material: Cellulose And A Scouring Pad On One Side 10. Dimension: Length: 140 - 180 Mm; Width : 80 - 100 Mm ; Thickness : 12 - 20 Mm The Item Must Be Of Good Quality 22 4 Pieces Garbage Receptacles 1. Bucket / Tub Material: Hard Plastic, (ps) Polystyrene 2. Bucket / Tub Color: Any Color 3. Capacity (gallons): 3 Gal. (minimum) Comes With A Cover The Item Must Have Good Quality 23 50 Pieces Gloves, Rubber 1. Heavy-duty Latex-free Vinyl Rubber Gloves 2. Thickness: 4 Mil 3. Color: Any Color 4. Size: Medium 5. Other Features: Acid/solvent Resistant. The Item Must Be Of Good Quality 24 30 Pieces Goggles, Safety Safety Goggles, Clear Polycarbonate - One Piece Lens With 180° Panoramic View, Non-fog Size/dimension: L 17 - 18.5 Cm X W 8 Cm X D 5-7.5 Cm High Impact Resistant, Ansi "z87" Compliant Firm And Comfortable Seal Around Forehead, Cheeks, Nose And Temples Protects Against Splash, Chemicals, Dust Adjustable Head Strap Shall Bear Mark Z87 Embossed Or Engraved Or Etched On The Item. Smooth Surface, No Sharp Edges 25 2 Pieces Hairdryer Electric Hairdryer, With Concentrator Nozzle Two Heat Setting And 1 Speed (minimum) Rating: 220/240 Vac, 1200 W (minimum) Body Length Including Nozzle: 20 Cm Folding Handle Design, With Hanging Ring Smooth Surface, No Sharp Edges Branded, Brand Name And Electric Rating Permanently Mark On The Item, With Dti-bps Certification With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. With Service Centers Located In Major Cities In The Philippines. 1 Year Warranty(parts & Service) 26 4 Pieces Hose, Water Water Hose Material: Pvc Fiber Reinforced, Three (3) Layers; Any Color. Hose Length: 50 Feet. Hose Diameter: 5/8 Inches; Pressure Capacity: 200 Pounds Per Square Inch (minimum); Fitted With Male And Female Brass Couplers (nh, 11.5 Tpi) For Spray Nozzle No Sharp Edges 27 2 Pieces Kettle, Electric Electric Kettle Cordless (with Pouring Spout), Hinged Lid, Detachable From And Can Rotate On Its Corded Base Material: Round Stainless Body, Plastic Handle, Lid And Base Capacity: 1.5 To 2 Liter Automatic Shut - Off, With Power Indicator Light Power Rating: 220//240vac, 50/60hz, 1000 -1600 Watts Base With A 50 Cm (minimum) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges; Dti-bps Certified Comes With English Manual That Contains Operation Procedure, Maintenance And Safety Guide. The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item. 28 10 Pieces Laundry Sorter 6 3 - Bag Laundry Sorter, With Wheels 7 Bag: Polyester, Rectangular Shape, Detachable From Frame With Metal Handle And Hanging Hook 8 Bag Dimensions: Rectangular 22 X 15 X 8 Inch (minimum) Frame Material: Corrosion Resistant Steel, Sturdy No Wobble 9 Frame Overall Dimensions: Rectangular, 31 X 30 X15 Inch (minimum) With Four Casters, 2 Inch Diameter (minimum) 10 Smooth Surface, No Sharp Edges 29 4 Pieces Light, Emergency Emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector Power Rating: 220 -240 Vac , 50/60 Hz 20-24 Hours Charge Time Dimensions: Rectangular 27 X 7 X 27 Cm (approx.) Sooth Surface, No Sharp Edges Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures The Item Must Be Branded, Brand Name And Electrical Ratings Permanently Mark On The Item 30 2 Pieces Mirror Wall Mirror With Frame Flat Glass Mirror, 2 Mm Thick (minimum), Clear With No Distortion Frame: Wood Or Plastic Commercial Finish Rectangular Shape, 3600 Sq.cm (minimum) Includes Mounting Accessories Smooth Surface, No Sharp Edges 31 10 10 Pieces Mop Mop, Handle And Mop Head Set, Refillable Head Handle: Aluminum Or Anti-rust Coated Steel, With Hard/stiff Plastic Mop Head Holder, Clip Type With Tightening Knob Overall Handle Dimension: 130 X 19 Cm (minimum) Mop Head: Cotton Thread/yarn, Sewn Tailband, L 34 X 16 X 4 Cm (minimum), White Handle: Plated Steel Tube Or Wood, Length: 40 (minimum), No Sharp Edges 32 2 Pieces Polisher, Floor, Electric, With Accessories Electric Floor Polisher With Accessories Material: Stainless Steel, Aluminum Alloy Handle: Stainless Tube, Adjustable Height 1 Meter Long (approximate), With Dual Switch Lever Size/capacity :13 Inch (minimum) Diameter Power Supply: 220/240 Vac, 50/60 Hz. Power: 1/3 Hp (minimum) Rotation Speed : 160 Rpm (minimum) Heavy Duty (royal) Power Cord Length : 12 Meters (minimum) With Type A Plug (or Providing 10a Plug Adapter Is An Option) With Pair Of Rubber Wheels, Smooth Surface, No Sharp Edges Comes With Pad Holder, 2 Pcs - Polishing Brush And 3 Pcs - Floor Polishing Pads Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures Branded, Brand Name And Electric Rating Permanently Mark On The Item, With 1 Year Warranty Parts And Service The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 33 2 Pieces Shelving Shelving, Open, Knockdown Type, Adjustable Shelves Metal Powder Coated Frame Number Of Shelves : 5 Overall Dimensions : 85 X 30 X 180 Cm(minimum) Sturdy Connection, No Wobble Smooth Surface, No Sharp Edges 34 10 Pieces Sign, Caution Caution Sign, A Shape-2 Panel Self-standing, With D-handle, Collapsible For Easy Storage Material: High Impact Plastic, Panel Dimension : Rectangular (lxw) 55-65 Cm X 25 X 61 0m (minimum), Panel Depth : 2 Cm (minimum) Color: Yellow Print Description: "caution: Wet Floor" On One Side "cleaning In Progress On The Other Side, Both Messages Provided With Graphics Printed In Black. Font Size: 100 -120 Mm X 50 -70 Mm, Arial Smooth Surface, No Sharp Edges 35 19 20 Pieces Sponges, Dish 20 Dish Sponge, Cellulose, Non-scratch Dimensions: 5 X 3 X 1 Inch (minimum) 21 Branded 36 11 10 Pieces Spray Gun, Water Barber/salon Spray Gun Material: Hdpe Transparent Plastic Capacity: 300 Ml.(minimum) Trigger Type Sprayer Dimension: Diameter :7 Cm. X Height: 16.3 Cm (minimum) Rotating Nozzle To Adjust Spray Patterns Smooth Surface, No Sharp Edges Must Be Branded 37 4 Pieces Squeegee Squeegee, Short Handle Head/blade Material: Stainless, Rubber Handle: Plastic Or Stainless Steel Blade Length: 25 - 30 Cm Overall Length (handle And Head) 20 - 32 Cm No Sharp Edges 38 4 Pieces Squeezer, Mop Mop Bucket With Squeezer/wringer And Wheels Hand Lever To Squeeze, Made Of Metal, With Hand Grip Material : Hard Plastic, (ps) Polystyrene Or Its Equivalent Capacity : 30 L (minimum) Overall Dimension (excluding Handle: ( L X W X H ) 40 X 27 X 57 Cm (minimum) Color: Yellow With 3 Inches Non-marking Rubber Casters "caution" Printed In Black On Both Sides Of The Mop Bucket Smooth Surface, No Sharp Edges 39 2 Pieces Step Ladder Material: Aluminum U Channel Capacity: 250 Lbs (minimum) Type: Flatform Type Number Of Step: 6 (including Top Step) Reach Height: 6 To 8 Feet(minimum) Width: 15 Inches Minimum Spread: 4 Feet (minimum) Twin Steps With Gripped Treads To Prevent Slipping Step Braces On Top And Bottom Step Heavy Duty Aluminum Foot Bracket With Slip-resistant Foot Pad With User's Manual In English Which Includes: A. Parts Manual With Labels, Assembly Instructions, Branded 40 2 Pieces Vacuum Cleaner, Dry And Wet Electric Vacuum Cleaner, Wet And Dry Function, Sucks Even Screws, With 4 Swivel Caster Wheels Material: Hard Plastic, (abs) Or Rust Proof Body Equivalent Power Supply : 220/240vac, 50/60hz, 1000 Watts (minimum) Auto Shut Off Tank Capacity: 20 Liters (minimum) Equipped With Complete Accessories I.e., Detachable Vacuum Hose Assembly (flexible Non-kink), Extension Tubes/wands, Carpet (long Square) Brush Nozzle, Wet And Dry Floor Brush Nozzle, Crevice Nozzle, Hepa Filter, Sponge Filter/washable Cloth Bag. Comes With 4 Meters (minimum) Heavy Duty (royal) Power Cord, Molded Male Plug To Adapt Type A Outlet (or Providing 10a Plug Adapter Is An Option) Smooth Surface, No Sharp Edges With User's Manual Written In English That Contains Operating Procedure, Parts With Description, Safety Procedure, And Maintenance. The Item Must Be Branded, Brand Name And Electric Rating Permanently Mark On The Item. 1 Year Warranty Parts And Service With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 41 2 Pieces Washer, Dryer Laundry 1. Front Load Electric Washer, Laundry 2. Electronic Control, Digital Indicator Display, Transparent Glass Door 3. Body Material: Steel, Powder Coated, Any Color 4. Dimensions (wxdxh): 590 Mm (minimum) X 490 Mm (minimum) X 820 Mm (minimum) 5. Drum Material: Stainless Steel 6. Capacity: 8 Kg (minimum) 7. Spin Speed: 1200 Rpm (minimum) 8. Power Rating: 220 /240vac, 50/60 Hz. 9. Comes With A 1 Meter (minimum) Heavy Duty Power Cord With Male Plug To Adapt Type A Outlet (or Providing 20a Plug Adapter Is An Option) 10. Smooth Surface, No Sharp Edges 11. With Dti-bps Certification, Brand And Electrical Ratings Clearly And Permanently Mark On The Item 9. Includes User's Manual In English Which Contains: A. A Diagram Of The Parts With Their Names, B. Operating Procedures On How To Use The Equipment, C. Safety Precautions When Using The Equipment, D. Basic Troubleshooting And Maintenance Procedures 12. The Item Must Be Branded, Dti-bps Certified, 1 Year Warranty Parts And Service 13. With Service Centers Located In Major Cities In The Philippines. The Offered Brand Of The Item Must Be An International Brand With At Least 5 Years Presence At The Local Market And Global Presence In The Usa, Europe Or In Japan Market. 42 4 Pieces White Board White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) With Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges Front Office Services Nc Ii 1 5 Pieces Calculator Type: Simple Calculator, Nonscientific Body Material: Hard Plastic Minimum Size: 110mm Width X 140mm Long Lcd Display: At Least Font Size Is 8mm X 5mm With Dual Power; Solar Cell And Battery With At Least 8 Digits Display Includes Spare Battery Packed With Protective Carton Box User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C.operating Procedures On How To Use The Equipment 2 2 Pieces Cart, Bell Boy Type: Hotel Luggage Trolley Capacity: At Least 450 Kilograms Minimum Dimensions: Length - 1000mm X Width - 600mm X Height - 1700mm Frame Material: Stainless Steel Tubing Stainless Tube Diameter: At Least 35mm Black Powder Coated Steel Platform With Carpeted Surface And Rubber Bumper At The Edge With 4 Pieces X 200mm Diameter Black Pneumatic Swivel Wheels Packed With Shipping Carton Box Branded 3 1 Piece Cash Register With Drawer Printer: Width: 57mm (minimum) Speed: 2 Lines/sec (minimum) Lcd Display Size: 5cm Width X 10cm Long(minimum) With Drawer At Least 4 Bills And 5 Coins Compartments With Drawer Dimension At Least 410mm Width X 450mm Depth Input Method: Numeric 10-key Interface With At Least 2 Ports Power Source: 220-240volts Ac, 50/60hz; With Ac/dc Adapter Can Be Operated With Battery Programmable User's Manual In English Which Includes: A. Parts Manual With Labels 4 1 Piece Credit Card Imprinter Height Of The Imprinter 2 1/2 Inch (minimum) X Width 5 1/2 Inch (minimum) X Length 11 Inches (minimum) Carriage Material: Steel Body: Plastic Color: Black 20 Characters Per Line Card Mounting Can Accepts At Least 0.030" Thick Size Credit Cards Plate Can Accommodate Up To 5 Lines, Manual Type With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C.operating Procedures 5 1 Piece Credit Card Voucher Holder Material: 3 Mm Thick Clear, Acrylic, Dimensions: Height: At Least 255 Mm, Width: At Least 210 Mm, Thickness: At Least 70 Mm 6 1 Piece Detector, Fake Bills Led Display; Led Display Size: At Least 5 Cm Width X 10 Cm Long; Hard Plastic Casing; Ultraviolet (uv) And Magnetic (mg) Sensors; Power Source: Built In Rechargeable Battery,12v Output And Ac 100- 240v Adapter; With Complete Detection; Accessories Includes: Tough Plastic Carrying Case, Power Cord, Cleaning Brush, And Power Charger; User's Manual In English Which Includes: A. Parts Manual With Labels, B.assembly Instructions 7 1 Piece Guest Folio Rack Material: Hard Plastic; Accommodates At Least 50 Room Divider Indexes; With Divider Boards With Metal Tabs; A4 Size Divider; With Metal Sidings 8 1 Piece Hypercom Memory: 1 Mb Ram (minimum) Lcd Display; 160 X 80 Pixel Graphics (minimum) With Card Reader Magnetic Stripe Pin Pad Port: 4-wire, Rs485; With Peripheral Ports For Pc Connection; Electronic Cash Register Or Journal Printer; With At Least 2400bps Modem; Support Synchronous (sdlc) And Asynchronous, Lan Operation; With Pin Encryption; With Thermal Printer At Least 576 Dots Per Line; Thermal Paper – 2 Inches Wide X 3 Inches Roll Diameter (min.); Keypad: Membrane, 12 Keys, Water-resistant 9 1 Piece Key Card Marker With Verifier Set Of Hotel Door Lock System With Management Software; A) 1 Unit - Card Type Door Lock With Inductive Distance At Least 4cm B) 1 Unit - Card Encoder Unit With 25 Pieces Door Room Key Cards Computer Software System For Door Lock And Making Cards With Complete Accessories Including The Usb Type A Cable Interface To The Computer User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions C. Operating Procedures On How To Use The Equipment 10 1 Piece Key Rack Rack Material: Wood Number Of Racks: Can Accommodate At Least 40 Key Cards Minimum Rack Size: 70mm Width X 110mm Height Depth Of The Rack At Least 50mm Any Color Paint Type: Wall Mounted Rack Pack With Shipping Carton Box 11 1 Piece Safety Deposit Box/drop Vault Material: Metal, Powder Coated, Solid Steel Door Thickness: 4mm(minimum) Body Thickness: 2mm(minimum) Minimum Outer Dimension: L: 30cm X H: 20cm X W: 20cm Electronic Lock System Battery Operated Digital Panel: Requires 4 X ‘aa’ Batteries User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, Operating Procedures On How To Use The Equipment, Branded 12 4 Pieces Speaker, Lapel Frequency At Least 500mhz With Audio Input Connector With Operation Range At Least 50meters Receiver/70ma Earphone Output Level: 32ohm, 65mw Operates With Energizer Battery With Minimum Power Consumption Of Transmitter At Least 3v/70ma Receiver: 3v/70ma Wellness Massage Nc Ii 1 1 Piece Dummy, Anatomical 1. Half Life-size Muscular Figure Measures 32" Tall (minimum). 2. This Model Features 27 Removable Parts That Are Held On By Metal Screws, Posts, And Hooks. 3. It Shows The Muscular System With Numbered Parts That Comes With A Corresponding Key. 4. It Has Removable Arms, A Removable Calvarium, And A Removable Chest Plate That Hides The Individual Numbered Organs Of The Digestive System 5. Detachable Muscles Include: Deltoid, Brachioradialis With Extensor Carpi Radialis Longus And Brevis, Biceps Brachii, Pronator Teres With Palmaris Longus And Flexor Carpi Radialis, Sartorius Muscle, Rectus Femoris, Extensor Digitorum Longus, Tensor Fasciae Latae, Gluteus Maximus, Biceps Femoris, Semitendinosus, Gastrocnemius, Soleus. 6. Removable Organs Include: Brain (2parts), Lungs (2 Parts), Heart (2 Parts, Liver, Intestines, Stomach 7. Base Is 13" X 9" (removable) 8. Weighs 12 Lbs. (approximately) 9. Plastic Material 10. Non-toxic Material 11. Carton Box Packaging 2 5 Pieces Massage Bed/table Materials: Hard Wood With Steel Bracings, Hardwood Frame, Marine Plywood Deck; Color: Black Dimensions: W:75 Cm X L:183 Cm X H: (adjustable) Height: Adjustable From 24 In. - 33in. Leg Thickness - 35mm (minimum) Cushion System: High Density Foam (7.5 Cm / 2.95") Minimum With Pu Leather Cover (1mm Thick) Finishing: Round Corner Weight Capacity: 250 Kg(minimum) Gross Weight: 21 Kg (approximate) 2 End Support Bearer To Strengthen The Base And Increase Weight Capacity Accessories - Aluminum Headrest (adjustable) + Face Plug + Armrest + Arm Sling + Carry Case Portable And Foldable 3 1 Piece Massage Chair 1. Padded With 3" Thick, High-density, Small-cell Foam 2. Size: 14"-diameter Seat (minimum) But Without Back And Arm Rest, With Metal Post And Hard Plastic Star. 3. Pneumatic Spring Will Effortlessly Adjust The Height From 18" To 24" With The Pull Of A Lever 4. Five Heavy-duty, Smooth-rolling Wheels 5. Load Capacity: 265 Lbs / 120 Kg (maximum) 6. Smooth Surface And No Sharp Edges Any Color With One Color Only For Whole Lot 4 5 Pieces Sphygmomanometer Aneroid Type; (for Adult Use) Large Cuff Sizes: 33 To 42 Cm Arm Diameters Accuracy: ±3mm Hg; Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Index And Range Markings On The Dial For Clear Readings Nylon Cuff Is Durable And Stain Resistant With A Velcro Closure Inflation System Is Latex Free And Has An Easy-release Deflation Valve Chrome-plated Brass Air Release Valve; Set Includes: 1 Unit Sphygmomanometer; 1 Zippered Nylon Carrying Case Smooth Surface And Edges, Nontoxic Material 5 5 Pieces Stethoscope Chest-piece Description: Stainless Steel Double Chest Piece Color: Black Tubing Description: Y-tube Pvc Uses Extra Soft Replaceable And Pivotable Ear Tips The Binaural Is Chromium-plated Chest-piece Diameter: 44 Mm (minimum) And Has Non-chill Rim Overall Length: 29" /74 Cm (minimum) The Stethoscope Is Latex-free Comes With A Pair Of Replacement Ear Tips, A Replacement Membrane, And A Name Plate Smooth Surface And No Sharp Edges 6 1 Piece Talking Sphygmomanometer Type: Arm Type Blood Pressure Monitor (talking English), Nylon Cuff Sizes: 33 To 42 Cm Arm Dia. Lcd Digital Display: Systolic, Diastolic, Pulse Rate With Real Voice, Loud And Clear, Announcing Blood Pressure Automatically When Reading Is Detected And Displayed Simultaneously Dimensions: 98mm*126mm*60mm (approximate) Hard Plastic Casing, Smooth Surface And No Sharp Edges, Nontoxic Materials Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Weight: 450g (approximate) Pressure Measurement Range: 20~280mmhg(0.4kpa-37.3kpa) Pressure Accuracy: ±3mmhg(±0.4kpa) Pulse Measurement Range: 40 ~199 Beats /min Voltage: 4*aaa Alkaline Batteries Or Power Adapter Certificate: Ce Rohs Intelligent Automatic Pressurization And Decompression Incorrect Prompting Function Automatic Shutdown: 1 Min After Last Operation Carton Box Packaging 7 1 Piece Talking Thermometer Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, Lr41 Alkaline-magnesium Button Battery Real Voice (loud And Clear In English) Announces Temperature Automatically When Reading Is Detected Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Dimension Approx.: 2.0 (w) X 4.4 (h) X 1.2 (d) Inches (not Including Probe) / 51 (w) X 110 (h) X 30 (d) Mms (not Including Probe) Choices In Degrees Celsius Or Fahrenheit Talk Button Repeats Last Temperature Reading Last Reading Memory Auto Switch Off Accessories: Protective Case, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 8 5 Pieces Thermometer, Digital Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, 1 Lr41 Alkaline-magnesium Button Battery When Measured At A Standard Room Temperature Of 23 Deg C (73.4 Deg F) In A Test Tank Held At Constant Temperature Power Consumption: 0.1mw Low Battery Indication: Battery Symbol Displayed Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Memory: Last Measuring Reading Beeper Function: 1 Beep When Power On 3 Beeps After Measurement Completed External Size (mm): 19.4(w) × 132.5 (l) × 10.0(d) Accessories: Protective Case, Test Battery, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 9 1 Piece White Board White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) With Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges

Details: Description The National Library Of The Philippines (nlp), Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Thirty (30) Working Days. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A.bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From Nlp Bids And Awards Committee (bac) Secretariat Email Address And Inspect The Bidding Documents Posted At The Philippine Government Electronic Procurement System (philgeps) Or In Our Official Website Web.nlp.gov.ph. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13, 2024 Through Email And Website(s) Below. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Electronic Means Or By Presenting The Official Receipt In Person. 6. The Nlp Will Hold A Pre-bid Conference On November 21, 2024 At 01:00 Pm Through Video Conferencing Via Zoom Which Shall Be Open To All Prospective Bidders. Send Interest To Bac@nlp.gov.ph With Subject: Request To Join The Pre-bid Conference Of Public Bidding No. 24-20. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Below On Or Before December 05, 2024 At 3:00 Pm. Usb Flash Drive Containing The Soft Copy Of The Technical (in Pdf) And Financial (in Word Or Excel) Requirements Must Be Included In The Original Copy Of The Technical Documents. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 05, 2024 At 03:01 Pm At The 6th Floor Function Room, Nlp Building. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Nlp Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Maureen M. Terrenal Marie Joy H. Bestoir Eleanor C. Siyang Jonathan F. Santos Bac Secretariat National Library Of The Philippines Tel. No.: (02) 5314-2100loc. 406 / 412 Email: Bac@nlp.gov.ph Website: Web.nlp.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Document: Web.nlp.gov.ph / Www.philgeps.gov.ph Sgd. Maricel M. Ureña Bac, Chairperson Item No. Lot 1 Academic And Trade Ebooks 1 100 Herbs To Grow : A Comprehensive Guide To The Best Culinary And Medicinal Herbs, Mcvicar, Jekka;don, Monty, 9781837830480, 2024 2 3d Printing : Polymer, Metal And Gel Based Additive Manufacturing, Singh, Rupinder;kumar, Ranvijay;kumar, Vinay;davim, J. Paulo, 9783111081632, 2024 3 50 Strategies For Supporting Multilingual Learners , Manning, Mandy, 9798765946244 9798765946251 , 4 A Concepts-based Introduction To Financial Accounting, Kolitz, D., 9781485132783, 2023 5 A Straight Talking Introduction To Emotional Wellbeing : From Mental Illness To Mad Studies, Beresford, Peter, 9781915220363, 2023 6 Acknowledging, Supporting And Empowering Workplace Bullying Victims : A Proactive Approach For Human Resource Managers, Yarbrough, Jillian Williamson, 9783031410307, 2023 7 Adult Physical Conditions : Intervention Strategies For Occupational Therapy Assistants, Second Edition, Mahle, Amy J.;ward, Amber L., 9781719644365, 2022 8 Advanced Introduction To Digital Society, Castells, Manuel., 9781803921129, 2024 9 Aerial Warfare, Ledwidge, 9780198804314, 2020) 10 Ai For Absolute Beginners: A Clear Guide To Tomorrow, Theobald, Oliver, 9781835886533, 2024 11 An Introduction To Interaction : Understanding Talk In The Workplace And Everyday Life, Garcia, Angela Cora, 9781350199941, 2023 12 An Introduction To South Asian Politics, Devotta, Neil, 9780429582479, 2024 13 An Introduction To Taxation, Butler, Eamonn, 9780255368384, 2024 14 An Introduction To The Effects Of Mass Media, Haney, Roger, 9781527575745, 2024 15 Ancient Philosophy, Julia Annas, 9780198805885, 2023) 16 Arbitration, Schultz, Grant, 9780198738749, 2021) 17 Aromatherapy : A Clinical Guide To Essential Oils For Holistic Healing (a Beginner's Guide To Making And Using Essential Oils At Home For Skincare), Hickman, Thomas, 9781777427696, 2024 18 Artisan Air-dry Clay : The Beginner's Guide To Easy, Inexpensive & Stylish No-kiln Pottery, Hostasova, Radka, 9781644032527, 2022 19 Asean Post-2025 : Reimagining The Asean Economic Community, Tijaja, Julia;tay, Simon;basu Das, Sanchita, 9789815203400, 2024 20 Assessment As Information Practice : Evaluating Collections And Services, Haddow, Gaby;white, Hollie, 9781000510515, 2021 21 Atheism, Baggini, 9780198856795, 2021) 22 Autoimmune Disorders : Adjuvants And Other Risk Factors In Pathogenesis, Watad, Abdulla;bragazzi, Nicola Luigi;shoenfeld, Yehuda, 9781119858423, 2024 23 Bacteria, Amyes, 9780192895240, 2022) 24 Be A Polymer Clay Pro! : 15 Projects & 20+ Skill-building Techniques, Tomlinson, Lauren, 9781644032473, 2023 25 Biodiversity Conservation, Macdonald, 9780199592272, 2023) 26 Blasphemy, Sherwood, 9780198797579, 2021) 27 Borders, Alexander C. Diener And Joshua Hagen, 9780197549605, 2024) 28 Bosses, Coworkers, And Building Great Work Relationships (hbr Work Smart Series), Review, Harvard Business;goldstein, Eliana;gallo, Amy;wilding, Melody;rogelberg, Steven G., 9781647827120, 2024 29 Botany : An Introduction To Plants And Their Adaptations, Pandey, Santosh, 9781779560490, 2024 30 Bullying In Schools : Measures For Prevention, Intervention And Aftercare, Böhmer, Matthias;steffgen, Georges, 9783658435769, 2024 31 Chatgpt For Social Media Managers : Boost Engagement And Streamline Content Creation With Ai-powered Tools (2024 Guide), Wagner, Malcolm, 9783689441555, 2024 32 Chatgpt Simplified Unleash Creativity And Save Time In Your Daily Life (2024 Edition) : Learn How To Extract The Most Value Out Of Ai., Ruffilo, Nick, 9798869100603, 2024 33 City Planning, Abbott, 9780190944346, 2020) 34 Climate Change, Maslin, 9780198867869, 2021) 35 Cognitive Behavioural Therapy, Mcmanus, 9780198755272, 2022) 36 Community Based Tourism, Juyal, Deepak, 9781779561268, 2024 37 Community Studies : An Introduction To The Sociology Of The Local Community, Bell, Colin;newby, Howard, 9781000463828, 2023 38 Complete Copyright For K-12 Librarians And Educators, Second Edition, Russell, Carrie, 9780838939574, 2023 39 Consuming Digital Disinformation : How Filipinos Engage With Racist And Historically Distorted Online Political Content, Jason Vincent A Cabanes;fernando A Santiago;beng, Ooi Kee, 9789815104530, 2023 40 Contesting The Philippines, Rood, Steven;taylor, Veronica L, 9789815104929, 2024 41 Corporate Psychology And Its Impact On Diversity, Equity, And Inclusion, Al A'ali, Ebtihaj Ahmed;masmoudi, Meryem;alsaffar, Gardenia, 9781668490167, 2023 42 Creative Puzzles To Ignite Your Mind, Gupta, Shyam Sunder, 9789811965654, 2023 43 Critical Thinking : An Introduction To Reasoning Well, Watson, Jamie Carlin;arp, Robert;king, Skyler, 9781350232952, 2024 44 Cultural Management : A Research Overview, Bilton, Chris, 9781000878417, 2023 45 Curating Community Collections : A Holistic Approach To Diverse Collection Development, Schreiber, Mary;bartlett, Wendy K., 9781440880995, 2024 46 Customer Xperience Leadership : A Blueprint To Maximize Performance, Goldschmidt, Nadav, 9789811264092, 2024 47 Cyber Safety For Everyone : A Comprehensive Guide To Online Safety, 3rd Edition, Teens, Jaago, 9789355516350, 2024 48 Data Analysis With Python : Introducing Numpy, Pandas, Matplotlib, And Essential Elements Of Python Programming, Dixit, Rituraj, 9789355511034, 2022 49 Deeply Responsible Business : A Global History Of Values-driven Leadership, Jones, Geoffrey, 9780674292994, 2023 50 Dementia, Taylor, 9780198825784, 2020) 51 Democracy, Naomi Zack, 9780192845061, 2023) 52 Digital Factory : A Digital Compass For Smart Manufacturing, Kozamernik, Luka, 9783031510717, 2024 53 Digital Marketing For Rural Small Businesses : A Comprehensive Guide To Getting Found On The Internet, Treadway, Chad J, 9798988528920, 2023 54 Digitalization In Practice : Intersections, Implications And Interventions, Perriam, Jessamy;meldgaard Kjær, Katrine, 9783110787641, 2024 55 Displaying Organisation: How To Successfully Manage A Museum Exhibition, Goddard, Rhiannon, 9781783305315, 2023 56 Dynasty, Duindam, 9780198809081, 2019) 57 Education, Thomas, 9780198859086, 2021) 58 Entrepreneurship Made Easy : Kingdom Entrepreneurship Nexus, Appiah, Rev. Michael, 9781684867769, 2024 59 Ethics In Online Ai-based Systems : Risks And Opportunities In Current Technological Trends, Caballé, Santi;casas-roma, Joan;conesa, Jordi, 9780443188503, 2024 60 Evangelicalism, Stackhouse Jr., 9780190079680, 2022) 61 Exiting Violence : The Role Of Religion, Tonelli, Debora;mannion, Gerard Michael J., 9783110796827, 2024 62 Experience, Opportunity, And Developing Your Career (hbr Work Smart Series), Review, Harvard Business;aboubaker, Mimi;malhotra, Ruchika T.;chamorro-premuzic, Tomas;riegel, Deborah Grayson, 9781647827069, 2024 63 Fatty Liver Disease Diet : A Beginner's Step-by-step Guide With Recipes And A Meal Plan, Ackerberg, Bruce, 9798869331854, 2024 64 Food And Beverage Service, Cajiao, Israel Tinoco, 9781779561473, 2024 65 Forensic Science, Fraser, 9780198834410, 2020) 66 From Dream To Reality : How To Make A Living As A Freelance Writer, Kwak, Jessie L., 9781648412806, 2023 67 From Paper To Practice : Utilizing The Asean Guide On Artificial Intelligence (ai) Governance And Ethics, Fong, Kristina, 9789815203684, 2024 68 Front Office Management, Cajiao, Israel Tinoco, 9781779561305, 2024 69 Future Farming: Advancing Agriculture With Artificial Intelligence, Shukla, Praveen Kumar;bera, Tushar Kanti, 9789815124729, 2023 70 Games, Changes, And Fears : The Philippines From Duterte To Marcos Jr., Arugay, Aries;encinas-franco, Jean, 9789815203189, 2024 71 Geometry, Dunajski, 9780199683680, 2022) 72 Geophysical And Climate Hazards, Bill Mcguire, 9780192874535, 2024) 73 Giftedness And Talent : What Educators And Psychologists Need To Know, Preckel, Franzis;vock, Miriam;olszewski-kubilius, Paula, 9781616766276, 2024 74 Globalization, Manfred Steger, 9780192886194, 2023) 75 Greenhouse Gardening For Beginners : Your Ultimate Guide To Creating A Flourishing Greenhouse Garden (2024), Butler, Raven, 9783988316967, 2023 76 Habeas Corpus, Tyler, 9780190918989, 2021) 77 Handbook On The Politics And Governance Of Big Data And Artificial Intelligence, Zwitter, Andrej;gstrein, Oskar J., , 2023 78 Hbr Guide To Unlocking Creativity, Review, Harvard Business, 9781647825072, 2023 79 Health Care Of The Elderly : Essays In Old Age Medicine, Psychiatry And Services, Arie, Tom, 9781000580952, 2024 80 Healthy Eating For Older Adults, Plaven, Jeremy, 9798891137677, 2024 81 Higher Education And Sdg17 : Partnerships For The Goals, Cabrera, Ángel;cutright, Drew, 9781804557044, 2023 82 Horror, Darryl, 9780198755562, 2021) 83 Housekeeping Management, Juyal, Deepak, 9781779561312, 2024 84 How Public Libraries Build Sustainable Communities In The 21st Century, Williams-cockfield, Kaurri C.;mehra, Bharat, 9781803824376, 2023 85 Human Resource Management, Wilkinson, 9780198714736, 2022) 86 Hydroponics Garden : Cultivating Abundance With Hydroponic Gardening (2024 Guide For Beginners), Barlow, Rolf, 9783988318497, 2024 87 I, Human : Ai, Automation, And The Quest To Reclaim What Makes Us Unique, Chamorro-premuzic, Tomas, 9781647820565, 2023 88 Improving Library Systems With Ai : Applications, Approaches, And Bibliometric Insights, Senthilkumar, K. R.;jagajeevan, R., 9798369355961, 2024 89 Inclusion (hbr Emotional Intelligence Series), Review, Harvard Business;washington, Ella F.;dobson-smith, Dds;rezvani, Selena;gordon, Stacey A., 9781647824839, 2023 90 Infectious Disease 2ed, Marta Wayne, Benjamin Bolker, 9780192858511, 2023) 91 Information For Sustainable Development : Technology, People And Society, Chowdhury, G. G.;chowdhury, Sudatta, 9781783306688, 2024 92 Information Literacy And The Digitalisation Of The Workplace, Widen, Gunilla;teixeira, Jose, 9781783305803, 2024 93 Information, Cyber And Space Domain And Its Application In Future Land Warfare, Mallick, Pk, 9789391490645, 2023 94 Intelligence, Deary, 9780198796206, 2020) 95 Interviewing Users : How To Uncover Compelling Insights, Portigal, Steve;burge, Jamika D., 9781959029823, 2023 96 Introduction To A Social Worker, The National Institute For Social Work Training, The National, 9781000438048, 2023 97 Introduction To Algorithms: A Comprehensive Guide For Beginners, Llc, Cuantum Technologies, 9781836203865, 2024 98 Introduction To Chemistry, Motola, Martin, 9781779561879, 2024 99 Introduction To Communication Studies, Lubinga, E., 9781485130147, 2023 100 Introduction To Datafication : Implement Datafication Using Ai And Ml Algorithms, Goniwada, Shivakumar R., 9781484294963, 2023 101 Introduction To Game Programming Using Processing : For Designers, Artists, Players, Non-tech People And Everybody Else, Cermak-sassenrath, Daniel, 9781040021842, 2024 102 Introduction To Governance, Government And Public Administration, Franklin, Aimee L.;raadschelders, Jos C. N., 9783031326899, 2023 103 Introduction To Key Principles Of Aquaculture, Bruno Augusto Amato Borges, 9781779560131, 2024 104 Introduction To Motivational Interviewing For Mental Health Clinicians : A Practical Guide To Empowering Change In Mental Health Care, Townsend, Philip Jericho, 9781923238077, 2024 105 Introduction To Neurolinguistics, Kulkarni, Prafull Dhondopant, 9781774696224, 2023 106 Introduction To Philosophy, Heidegger, Martin;mcneill, William, 9780253069214, 2024 107 Introduction To Physics, Vsemirnova, Ekaterina, 9781779561893, 2024 108 Introduction To Statistics, Ngetich, Allan, 9781779561640, 2024 109 Key Concepts In Hotel Management, Raga, Jennifer, 9781774696347, 2023 110 Key Concepts In Library Science, Gaurav, Kumar, 9781774696354, 2023 111 Key Concepts In Tourism, Raga, Jennifer, 9781774696378, 2023 112 Leading Together : Academic Library Consortia And Advocacy, Herold, Irene M.h., 9780838938881, 2021 113 Learn To Watercolor : The Essential Techniques In 10 Projects, Linden, Sarah Van Der, 9781644032824, 2022 114 Let's Roll : A Guide To Setting Up Tabletop Role-playing Games In Your School Or Public Library, Maxwell, Lucas, 9781783306152, 2023 115 Librarian's Guide To Games And Gamers : From Collection Development To Advisory Services, Goodridge, Michelle;rohweder, Matthew J., 9798216110958, 2021 116 Library 2035 : Imagining The Next Generation Of Libraries, Hirsh, Sandra, 9781538180419, 2024 117 Live The Life You Love : Empowering Women Through Franchise Ownership, Schaeffer, Linda, 9781950336814, 2024 118 Machine Learning With Python : Unlocking Ai Potential With Python And Machine Learning, Theobald, Oliver, 9781835462072, 2024 119 Making A Difference : Instructional Leadership That Drives Self-reflection And Values The Expertise Of Teachers, Mette, Ian M.;cormier, Dwayne Ray;oliveras, Yanira, 9781475872279, 2023 120 Managing Grey Literature : Technical Services Perspectives, Leonard, Michelle;thomas, Susan E., 9780838938218, 2022 121 Marine Biology, Mladenov, 9780198841715, 2020) 122 Marketing, Le Meunier-fitzhugh, 9780198827337, 2021) 123 Men's Sexual Health In Early Modern England, , 9789048537761, 2024 124 Mentoring For Speech And Language Therapists : Unlocking Professional Development Throughout Your Career, Heritage, Mary, 9781040031124, 2024 125 Metastatic Bone Disease : An Integrated Approach To Patient Care, Randall, R. Lor, 9783031520013, 2024 126 Military Strategy, Antulio J. Echevarria Ii, 9780197760154, 2024) 127 Museums In Motion : An Introduction To The Histories, Functions, And Aspirations Of Museums, Decker, Juilee, 9781538155745, 2024 128 Nelson Mandela, Elleke Boehmer, 9780192893444, 2023) 129 Nuclear Weapons, Siracusa, 9780198860532, 2020) 130 Open Access Literature In Libraries : Principles And Practices, Brunsting, Karen;harrington, Caitlin;scott, Rachel E., 9780838936757, 2022 131 Openai Api Cookbook: Build Intelligent Applications Including Chatbots, Virtual Assistants, And Content Generators, Habib, Henry;mckay, Sam;siegel, Paul, 9781805125730, 2024 132 Ortho Notes: Clinical Examination Pocket Guide, 5th Edition, Gulick, Dawn, 9781719650779, 2023 133 Pandemics, Mcmillen, Christian W., 9780197762004, 2024) 134 Particle Physics, Frank Close, 9780192873750, 2023) 135 Philosophical Method, Williamson, 9780198810001, 2020) 136 Philosophy Of Mind, Montero, 9780198809074, 2022) 137 Plague, Slack, 9780198871118, 2021) 138 Planetary Systems, Pierrehumbert, 9780198841128, 2021) 139 Poststructuralism, Belsey, 9780198859963, 2022) 140 Probabilistic Indexing For Information Search And Retrieval In Large Collections Of Handwritten Text Images, Toselli, Alejandro Héctor;puigcerver, Joan;vidal, Enrique, 9783031553899, 2024 141 Project Based Problem Solving And Decision Making : A Guide For Project Managers, Kerzner, Harold, 9781394207848, 2023 142 Public Administration : The Basics, Schiavo-campo, Salvatore, 9781000820591, 2023 143 Qualitative Research Approaches For Psychotherapy : Reflexivity, Methodology, And Criticality, Tudor, Keith;wyatt, Jonathan, 9781000895322, 2023 144 Reference And Information Services : An Introduction, Fifth Edition, Cassell, Kay Ann;hiremath, Uma, 9780838936443, 2023 145 Region, Nation And Homeland : Valorization And Adaptation In The Moro And Cordillera Resistance Discourses, Coronel Ferrer, Miriam, 9789814843720, 2020 146 Religion, Tweed, 9780190064679, 2020) 147 Rethinking Conflict Resolution And Management, Zartman, I. W.;vuković, Sinisa, 9781800376991, 2023 148 Revolutions, Jack A. Goldstone, 9780197666302, 2023) 149 Robotic Vision And Virtual Interfacing : Seeing, Sensing, Shaping, Eldridge, Luci;trivedi, Nina, 9781399523448, 2024 150 Security After The Unthinkable: Terror And Disenchantment In Norway, Burgess, J. Peter, 9781526166357, 2024 151 Serving Patrons With Disabilities : Perspectives And Insights From People With Disabilities, Laskin, Kodi, 9780838939550, 2023 152 Simple Book Repair Techniques, Conn, Donia, 9781538167458, 2024 153 Small Scale Businesses In The Hospitality Sector : The Forgotten Many And The Post-covid Era, Raga, Jennifer, 9781774692066, 2022 154 So, I'm Autistic : An Introduction To Autism For Young Adults And Late Teens, O'brien, Sarah, 9781839972270, 2023 155 Social And Medical Problems Of The Elderly : Fourth Edition, Hazell, Kenneth, 9781040007747, 2024 156 Social Anxiety : Hidden Fears And Shame In Teens And Adults, , 9781615375493, 2025 157 Social Media And Youth Mental Health, , 9781615375028, 2025 158 Sports Skill Analysis, Li, Weidong;dai, Boyi;zhu, Qin, 9781003849582, 2024 159 Stardom, Film Couples And Love Teams In 1970s Philippine Cinema, Sebastiampillai, Chrishandra, 9781399521017, 2024 160 Station : A Journey Through 20th And 21st Century Railway Architecture And Design, Beanland, Christopher, 9781849949521, 2024 161 Stem Cells, Slack, 9780198869290, 2021) 162 Suburbs, Carl Abbot, 9780197599242, 2023) 163 Superstition, Vyse, 9780198819257, 2020) 164 Supporting People To Live Well With Dementia : A Guide For Library Services, Mcnicol, Sarah, 9781783306008, 2023 165 Sustainability Beyond 2030 : Trajectories And Priorities For Our Sustainable Future, Tavanti, Marco;sfeir-younis, Alfredo, 9781040116630, 2024 166 Sustainable Communities For A Healthy Planet, Zywert, Katharine, 9781487550455, 2024 167 Sustainable Farming : Nurturing The Earth For Future Generations, Kushwaha, Saket, 9781779560506, 2024 168 Technical Program Manager’s Handbook : Empowering Managers To Efficiently Manage Technical Projects And Build A Successful Career Path, Teter, Joshua Alan, 9781804613160, 2022 169 The Application Of The Dragon. Storytelling To Job Success : How Employers Attract Good Employees And Applicants Can Use Hr Marketing And Recruiting Knowledge In Interview And Selection, Janson, Simone, 9783965960299, 2024 170 The Art Of Peace Formation: Arts-based Social Movements, Opportunities And Blockages, Birte Vogel,stefanie Kappler,oliver P. Richmond, 9781399519557, 2024 171 The Bible, Riches, 9780198863335, 2021) 172 The Big Source Book Of Free And Low-cost Library Programming : 300+ Resources, Ideas, And Tools, Kroski, Ellyssa, 9780838939697, 2024 173 The Big Sourcebook Of Free And Low-cost Library Programming : 300+ Resources, Ideas, And Tools, Kroski, Ellyssa, 9780838939697, 2024 174 The Collector And The Collected : Decolonizing Area Studies Librarianship, Pappas, Erin;arays, Anna;browndorf, Megan, 9781634001632, 2020 175 The Complete Herbal Handbook : 160 Herbal Remedies For Mental And Emotional Well-being, Shamar, Ranvir Rohan, 9781923238459, 2024 176 The Confident Warrior : How To Cultivate Confidence In Everyday Life, Then Use It!, B Dibacco, Kevin, 9781963239447, 2024 177 The Future Of Cropping Systems, Daniels, Julia E., 9798891130722, 2023 178 The Future Of Smart Agriculture, Mohapatra, Hitesh, 9798891133655, 2023 179 The Hbr Work Smart Collection (4 Books), Review, Harvard Business;glass, Russell;david, Susan;gallo, Amy;zheng, Lily, 9798892790659, 2024 180 The History Of Emotions, Dixon, 9780198818298, 2023) 181 The History Of Political Thought, Whatmore, 9780198853725, 2021) 182 The Microstress Effect : How Little Things Pile Up And Create Big Problems--and What To Do About It, Cross, Rob;dillon, Karen, 9781647823986, 2023 183 The Oxford Handbook Of Arts And Cultural Management, Jung, Yuha;vakharia, Neville;vecco, Marilena, 9780197621639, 2024 184 The Period Literacy Handbook, Hussain, Anne, 9781739010416, 2024 185 The Spanish Pacific, 1521-1815 : A Reader Of Primary Sources, Lee, Christina;padrón, Ricardo, 9789048552276, 2020 186 Transforming Society : A Comprehensive Introduction To Understanding Trauma, Adversity, And Becoming A Trauma-informed Organisation, Brighouse, Little, 9781803818313, 2024 187 Understanding Blindness : An Integrative Approach, Hollins, Mark, 9781000549423, 2023 188 Unleash Your Inner Bad Bitch : A Guide For Using Project Management Skills Into Work Life Management Queendom, Bond Dba Pmp, Syreeta S., 9798885043946, 2024 189 Urban Pest Management : An Environmental Perspective, Dhang, Partho, 9781800622944, 2023 190 Using Graphic Novels In The Stem Classroom, Boerman-cornell, William;ho, Josha;klanderman, David;klanderman, Sarah, 9781350279216, 2023 191 Violence, Dwyer, 9780198831730, 2022) 192 Viruses, Dorothy H. Crawford, 9780192865069, 2022) 193 Volcanoes, Branney & Zalasiewicz, 9780199582204, 2020) 194 War And Religion, Mitchell & Rey, 9780198803218, 2021) 195 Waste Problems And Management In Developing Countries, Sebastiampillai, Chrishandra, 9781779560407, 2024 196 Where It Hurts : An Introduction To Sociology For Health Workers, Russell, Cherry;schofield, Toni, 9781040050422, 2024 197 World Mythology, David Leeming, 9780197548264, 2022) 198 World Religions In Seven Sentences : A Small Introduction To A Vast Topic, Groothuis, Douglas, 9781514005835, 2023 199 Writing: Step-by-step | 6 Manuscripts In 1 Book, Including : How To Write A Novel, How To Write A Screenplay, Outlining, Story Structure, Plotting And Character Development, Marsh, Sandy, 9798330222537, 2024 200 You Can't Make A Tomelette Without Breaking Some Greggs : Toxic Management Lessons From "succession" (and What To Do Instead), Review, Harvard Business;gallo, Amy, 9781647826451, 2023 Additional Specifications: 1. Upon Purchase, The Nlp Should Own These Titles In Perpetuity (perpetual Access). 2. These Materials Should Be Purchased With No Annual Fee, No Maintenance Fee, No Hosting Fee, And No Support Fee. 3. Provide 24/7 Unlimited Access /user Using Ip/username And Password Authentication To Nlp 4. Provide Free Training And Seminars, Monthly Usage Statistics (to Be Submitted By Email Before The 5th Day Of The Succeeding Month, Manila Time), Administrator And Technical Support For Online Database Related Concerns. 5. The Vendor Will Provide Continuous Support To Nlp Promoting The Ebooks. 6. Must Provide Technically Feasible, Functional And Reliable Database System With 95% Uptime 7. These Titles Should Be Accessed In One Platform Only Or In Platforms With Existing Nlp Ebook Collection. 8. Must Provide Marc Records And A Pdf Copy Of The Material. 9. Submit A Soft Copy Of Technical And Financial Requirements Onto Usb Flash Drive Or Cd Or Dvd. Use The Attached Excel Template In Providing The Metadata. 10. Bundled With Minimum Of 42 Desktops With Estimated Amount Of P30,000.00 Per Unit - Intel Core I5 10th Gen Gigabyte H410 - 8gb Ram Ddr4 - Itb Hdd - Neutron Case - 19” Monitor Led - W/ Keyboard And Mouse - 240gb Ssd Sata - H510m Motherboard 11. The Vendor Will Agree: A. To Include In The Nlp Eportal Without Violating Any Law. B. To The Provision Of Url Reference C. To Allow To Nlp To Post The Remote Access Account In The Nlp Eportal. If Url Reference Is Not Available. Nlp Is Not Liable For Any Misuse Of The Remote Access Account. Item No. Lot 2 Ebook Titles Supporting Sdgs 1 A Practical Approach To Special Education Administration: Creating Positive Outcomes For Students With Different Abilities / James B. Earley/robert J. Mcardle / 2023 / 9781071877081 2 Accelerating Economic Growth: Lessons From 200,000 Years Of Technological Progress And Human Development / Jakub Growiec / 2022 / 9783031071959 3 Access To Justice In Rural Communities: Global Perspectives / Daniel Newman And Faith Gordon / 2023 / 9781509951673 4 Adhd: Your Questions Answered / Sarah Boslaugh / 2024 / 9798765110454 5 Architecture And Climate Change: 20 Interviews On The Future Of Building / Hofmeister, Sandra / 2024 / 9783955536299 6 Asean Post-2025: Reimagining The Asean Economic Community / Tay, Simon / Das, Sanchita Basu / Tijaja, Julia / 2024 / 9789815203400 7 Bridging Research And Library Practice: Global Perspectives On Education And Training / Matusiak, Krystyna K. / Bright, Kawanna M. / Schachter, Debbie / 2024 / 9783110772593 8 Building Better - Less - Different: Clean Energy Transition And Digital Transformation: Fundamentals - Case Studies - Strategies / Hebel, Dirk E. / Heisel, Felix / 2024 / 9783035627176 9 Children During Conflicts: Living In A Conflict Zone / Linda Barghoorn / 2024 / 9781039816077 10 Communities: Keywords In Teacher Education / Kenneth M. Zeichner / 2023 / 9781350173378 11 Contemporary World Issues: Food Insecurity / William D. Schanbacher/whitney Fung Uy / 2023 / 9781440878404 12 Contemporary World Issues: Global Terrorism / Steven Childs / 2023 / 9781440878268 13 Coping: Gender Dysphoria / Rose Mccarthy / 2024 / 9781499474237 14 Curating Community Collections: A Holistic Approach To Diverse Collection Development / Mary Schreiber And Wendy K. Bartlett / 2024 / 9798216171256 15 Current Controversies: Sustainable Consumption / Bridey Heing / 2022 / 9781534507838 16 Developing Quality Pshe In Secondary Schools And Colleges / Sophie-lauren Mcphee And Victoria-marie Pugh / 2023 / 9781350336995 17 Dismantling Global White Privilege: Equity For A Post-western World / Chandran Nair / 2022 / 9781523000029 18 Economic Growth And Development Potential / Crup/liu / 2023 / 9789814986502 19 Epidemics And Pandemics: Your Questions Answered / Charles Vidich / 2024 / 9798765110492 20 Exploring Social Injustice: Climate And Environmental Injustice / Gail Terp / 2023 / 9781678203955 21 Fighting Global Poverty: Economic Policy Strategies For Developing Countries / Basil Oberholzer / 2022 / 9783658366315 22 Food Shortage Crisis: Origins And Global Impact / Dawn M. Drake / 2024 / 9798216171577 23 Get Informed - Stay Informed: Housing And Homelessness / Natalie Hyde / 2022 / 9781427150950 24 Global Action For School Libraries: Models Of Inquiry / Schultz-jones, Barbara / Oberg, Dianne / 2022 / 9783110772586 25 Grassroots Approaches To Education For Sustainable Development: A Comparative Study Of The Usa And India / Radhika Iyengar And Pooja Iyengar / 2023 / 9781350320093 26 Health Reference Series: Dental Care And Oral Health Sourcebook, 7th Ed. / James Chambers / 2023 / 9780780820692 27 Health Reference Series: Global Public Health And Disease Control Sourcebook / Kevin Hayes / 2022 / 9780780819658 28 Healthy Oceans: Why They Matter / Andrea C. Nakaya / 2023 / 9781678203412 29 Healthy Relationships: Your Questions Answered / Charles A. Mckay / 2023 / 9798216183952 30 Healthy Skin: Your Questions Answered / Shayan Waseh / 2024 / 9798765110478 31 Healthy Sleep: Your Questions Answered / John T. Peachey And Diane C. Zelman / 2023 / 9798216171720 32 Healthy Technology Use: Your Questions Answered / Bernadette H. Schell / 2024 / 9798765110386 33 How Can I Help? What Individuals Can Do About Climate Change / Stuart A. Kallen / 2025 / 9781678208035 34 Human Rights At Risk: Gender Violence / Philip Wolny / 2025 / 9781678209278 35 Information Services For A Sustainable Society: Current Developments In An Era Of Information Disorder / Chisita, Collence Takaingenhamo / Fombad, Madeleine C. / Minishi-majanja, Mabel K. / Onyancha, Omwoyo Bosire / 2023 / 9783110772753 36 Issues In Action: Immigration, Refugees, And The Fight For A Better Life / Elliott Smith / 2022 / 9781728430676 37 Justice Matters / Gloria Ladson-billings / 2023 / 9781350268852 38 Latinx Queer Psychology: Contributions To The Study Of Lgbtiq+, Sexual And Gender Diversity Issues / Reynel Alexander Chaparro/marco Aurelio Maximo Prado / 2022 / 9783030822507 39 Men's Health And Wellbeing / Sanchia S. Goonewardene/oliver Brunckhorst/david Albala / 2022 / 9783030847524 40 Microbial Organic Acids Production: Utilizing Waste Feedstocks / Kumar, Vikas / Kumar, Amit / 2024 / 9783110792584 41 Microbiome Modification: The Superorganism For Good Health / Worby, Patricia / 2024 / 9781501518980 42 Parenting Trans And Non-binary Children: Exploring Practices Of Love, Support, And Everyday Advocacy / Magdalena Mikulak / 2022 / 9783031098642 43 Practical Innovation In Government, How Front-line Leaders Are Transforming Public-sector Organizations / Alan G Robinson/dean M Schroeder / 2022 / 9781523001804 44 Prevention In Mental Health: From Risk Management To Early Intervention / Marco Colizzi/mirella Ruggeri / 2022 / 9783030979065 45 Protecting Our Planet: Climate Change / Carla Mooney / 2025 / 9798384911364 46 Protecting Our Planet: Marine Conservation / Carol Hand / 2025 / 9798384911395 47 Quality: Keywords In Teacher Education / Clare Brooks / 2023 / 9781350286009 48 Reclaiming Your Community: You Don't Have To Move Out Of Your Neighborhood To Live In A Better One / Majora Carter / 2022 / 9781523000319 49 Six Steps To A Strong School Culture: A Leadership Cycle For Educational Success / Samuel Nix / 2024 / 9781960574534 50 Skilled And Vocational Trades: Become A Home Health Aide / Philip Wolny / 2024 / 9781678206857 51 Soldiers In Peacemaking: The Role Of The Military At The End Of War, 1800-present / Beatrice De Graaf, Frédéric Dessberg And Thomas Vaisset / 2023 / 9781350350502 52 Staying Healthy With Kidney Disease: A Complete Guide For Patients / Stephen Z. Fadem / 2022 / 9783030935283 53 Sustainable Agriculture: Nanotechnology And Biotechnology For Crop Production And Protection / Rajput, Vishnu D. / Singh, Abhishek / Ghazaryan, Karen / Minkina, Tatiana M. / Al-tawaha, Abdel Rahman M. / 2024 / 9783111234694 54 The Anatomy Of Peace: Resolving The Heart Of Conflict, 4th Ed. / The Arbinger Institute / 2022 / 9781523001156 55 The Dynamics Of Conflict-related Sexual And Gender-based Violence: Comparing Impact Across Global Regions / Davies, Sara E. / True, Jacqui / Riveros Morales, Yolanda / Banfield, Rachel / Oo, Phyu Phyu / Osei-tutu, Joana / 2024 / 9783111320861 56 The Ethics Of Water: From Commodification To Common Ownership / Cameron Fioret / 2023 / 9781350348837 57 The Sage Encyclopedia Of Filipina/x/o American Studies, 2 Vols. / Kevin Leo Yabut Nadal/allyson Tintiangco-cubales/ejr David / 2022 / 9781071828977 58 The World Of Work To 2030: A Practical Guide To Future-proofing Your Business And Your Career / Russell Beck / 2024 / 9781399412704 59 Thinking Critically: Climate Change / Carla Mooney / 2023 / 9781678204594 60 Treatments For Anxiety: Fact Versus Fiction / Myrna Chandler Goldstein And Mark A. Goldstein, Md / 2024 / 9798765111819 61 Uncertainty-driven Innovation: Managing The New Product Development Processes In An Unpredictable Environment / Giacomo Marzi / 2022 / 9783030995348 62 What Gender Should Be / Matthew J. Cull / 2024 / 9781350329010 63 Women And Society Around The World: Women And Politics - Global Lives In Focus / Malliga Och / 2023 / 9781440871917 64 Women And Society Around The World: Women And Sexuality / Kelly Campbell/m. L. Parker / 2023 / 9781440873058 Additional Specifications: 1. Upon Purchase, The Nlp Should Own These Titles In Perpetuity (perpetual Access). 2. These Materials Should Be Purchased With No Annual Fee, No Maintenance Fee, No Hosting Fee, And No Support Fee. 3. Provide 24/7 Unlimited Access /user Using Ip/username And Password Authentication To Nlp 4. Provide Free Training And Seminars, Monthly Usage Statistics (to Be Submitted By Email Before The 5th Day Of The Succeeding Month, Manila Time), Administrator And Technical Support For Online Database Related Concerns. 5. The Vendor Will Provide Continuous Support To Nlp Promoting The Ebooks. 6. Must Provide Technically Feasible, Functional And Reliable Database System With 95% Uptime 7. These Titles Should Be Accessed In One Platform Only Or In Platforms With Existing Nlp Ebook Collection. 8. Must Provide Marc Records And A Pdf Copy Of The Material. 9. Submit A Soft Copy Of Technical And Financial Requirements Onto Usb Flash Drive Or Cd Or Dvd. Use The Attached Excel Template In Providing The Metadata. 10. Bundled With Minimum Of 14 Desktops With Estimated Amount Of P30,000.00 Per Unit - Intel Core I5 10th Gen Gigabyte H410 - 8gb Ram Ddr4 - Itb Hdd - Neutron Case - 19” Monitor Led - W/ Keyboard And Mouse - 240gb Ssd Sata - H510m Motherboard 11. The Vendor Will Agree: A. To Include In The Nlp Eportal Without Violating Any Law. B. To The Provision Of Url Reference C. To Allow To Nlp To Post The Remote Access Account In The Nlp Eportal. If Url Reference Is Not Available. Nlp Is Not Liable For Any Misuse Of The Remote Access Account.

Details: Aalborg Renovation Invite Hermed For Market Dialog, Where Relevant Suppliers And Aalborg Consultancy In Dialogue. The Purpose Of The Purpose With The Market Dialog Is To Get Uncovered, About There Are Suppliers On The Market, Interested In And The Possibility Of Providing Green Plastic Bags, Live Up To Aalborg Municipality’s Wishes And Requirements. It Is Expected That The Poserne Should Have A Volume Between 10 And 20 Liter, And That There Should Be Snippers On The Posernes To Binde A Double Nod For He For Uses Can Close Posen Close. The Possss Are Also Wanted To Be Manufactured By Husstandind Plast And Produced With Focus On Environment And Sustainability, Including The Transport Of The Plastic Bags From The Production Site For The Company, There Is Vegne Af Aalborg Renovation Must Distribow The Plastic Bags Out To Aalborg Municipality's Citizens. If The Annual Is Delivered Ca. 20 Million Plastic Bags, Which Must Be Packed In Rolls Á Ca. 50pcs. Plastic Bags, Additional Packs In Packages With 3 Or 4 Rollers. The Market Dialog Has For Purpose To Give Aalborg Renovation A Bredere Market Knowledge, Which Is Founded For Kunne Requires Sit Need Further For The Upcoming Appointment. If You Want To Do This, You Will Be Entitled To Ask For Questions. However, Aalborg Renovation Reserves The Right To Enter Additional Dialogue With A Limited Number Of Messengers, Where There Is A Possibility For Any Outouts Of The Written Answer Via 1:1 Teams Meetings. In Order To Select A Representative Section Of The Market, You May Wish To See A Greater Interest In The Dialogue, End Aalborg Renovation Can Reach At Facilitere In The Appointment Of The Market Dialog. Market Dialog Should Thus Cover: Plastic Type • 100% Of The Material In The Plastic Bag Be Husstands Inside Plastics? • Where Do You Expect To Get The Housekeeping Plastic From? • Can It Be Documented, Where The Plastic For The Tribe Of Pos? Production • Who Are You Planning To Use For Production And Transport – Own Employees, Partners Or Subcontractors And How Are The Liability Distribution? • Where To Expect Making The Plastic Bags? • What Are The Price Differences Depending On The Poserne Is Produced In Denmark, Eu/eous Or Other Places? • What Is The Expected Delivery Time? Quality • What Is Your General Experiences With Fx Quality And Writing Poser For Food Waste? • What Kind Of Pose Regions Say Best For Collection Of Food Waste, So There Is No Waste? Can I Be In Relation To The Bottom, Thickness, Welding, Length Mm. • What Is The Typical Holdability Of The Poserne In Connection With Storage? • Can There Be A Date Marking Or Parable On The Poserne? Which Meaning Will The Garden For The Price? Samples • Can A Party Samples For Test I Connection With, At The Task? • What Will The Delivery Time Be In A Vare Trial? References • Do You Experience With Compareable Tasks? More. References? For Example, The Market Dialog Should Include Additional Lists, What Market Actors Are Interested In At Byde On En Agreement With Aalborg Renovation Ift, Technical Requirements Mv. In The Market Dialog Is Not A Preparing For Participation In The Upcoming Appointment And Gives Not A Improved Stilling In Relationship For Other Potential Suppliers. General Information About Aalborg Renovation: Www.aalborg Supply.dk.