Fire Extinguisher Tenders

Details: Description Invitation To Bid For The Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Feed Mill Processing Facility In Brgy. #40 Buyon, Bacarra, Ilocos Norte 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2024 Intends To Apply The Sum Of Ten Million Pesos (php10,000,000.00) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Provision Of Labor, Materials, Equipment Rental And Other Incidentals Needed For The Construction Of Feed Mill Processing Facility In Brgy. #40 Buyon, Bacarra, Ilocos Norte With Project Identification Number Da-rfo-1-2024-infra-035. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above Procurement Project With The Following Details And Specifications: Details And Specifications Project Location: Brgy. #40 Buyon, Bacarra, Ilocos Norte Project Description: Construction Of Feed Mill Processing Facility With A Dimension Of 15m X 10m Component 1: Building Scope Of Work: Description Qty Unit I. Mobilization And Demobilization 1.00 L.s. Ii. Permits And Clearance 1.00 L.s Iii. Project Billboard/sign Board 1.00 L.s Iv. Safety And Health 1.00 L.s V. Construction Of Temporary Facility 12.00 Sq.m. Vi. Clearing And Grubbing 100.00 Sq.m. Vii. Earthworks 99.66 Cu.m. Viii. Rsb Works 2,429.48 Kgs Ix. Forms Works 420.00 Bd.ft. X. Concrete Works 30.00 Cu.m. Xi. Masonry Works 30.00 Sq.m. Xii. Iron Works 7,619.13 Kgs Xiii. Painting Works 100.00 Sq.m. Xiv. Roofing And Siding Works 448.44 L.m Xv. Windows And Doors 29.50 Sq.m. Xvi. Plumbing Works 1.00 Lot Xvii. Electrical Works 15.00 Outlet Xviii. Da Logo 1.00 Lot Minimum Technical Personnel Required: • 1 Project Engineer • 1 Foreman • 2 Skilled Workers • 6 Unskilled Workers Minimum Equipment Required: • 1 Concrete Mixer, One-bagger • 1 Angle Grinder • 1 Cut-off Machine • 1 Bar Cutter • 1 Welding Machine • 1 Generator Set • 1 Electrical Drill Component 2: Machinery All Components Shall Be Of The Same Brand, Brand New And Not Rebranded/renamed. 1. Built A. Compact B. System (per Component) 2. Crusher Function: Crush The Raw Materials To Powder Capacity: 100kg/hr Primemover: 4kw, Electric Motor, Single Phase 3. Mixer Function: Can Mix Materials Uniformly Capacity: 100kg/batch Where One Batch Needs 5-10mins Primemover: 4kw Electric Motor, Single Phase 4. Screw Conveyor Function: Use To Lift And Transfer Powder Or Raw Materials To The Mixer. Primemover: 2.2kw Electric Motor, Single Phase Capacity: 500 Kg/hr 5. Feed Pellet Machine Primemover:15kw, Electric Motor, 3-phase Capacity: 300 Kg/hr 6. Belt Conveyor Capacity: 200 Kg/hr Power:2.2kw, Electric Motor, Single Phase 7. Cooler And Dust Collector Function: Use To Cool The Finished Product Capacity: 200kg/hr Primemover (cooler): 0.75 Kw Primemover (dust Collector): 2.2 Kw 8. Bag Sewing Machine 9. With 2 Tons Silo Other Requirements For The Supplier Of The Goods/machinery: * Brochures/pictures, Operator’s Manual * System Testing Shall Be Conducted By Amtec After Complete Installation * Valid Permit To Operate Issued By Bafe (all Machinery Components Must Be Stated As Product Lines) And Certificate Of Namdac Accreditation Issued By Pcaf * Certificate Of Company-owned/affiliated Service Center Within The Region And Service Center Must Have A Permit To Operate Issued By Bafe * Notarized Affidavit Of Undertaking For After Sales Service That Supplier Must Render Within 72 Hours Upon Receipt Of Notice From The Recipients/ Procuring Entity * Certificate Of Availability Of Spare Parts Of The Brand/model Being Offered Within The Region To Be Issued By The Distributor/manufacturer/affiliated Service Center * Notarized Certificate Of Stock Allocation To Be Submitted During The Bid Opening Issued By The Distributor/dealer/importer Specifying The Name Of Project To Da Rfo 1 * Certificate To Conduct On-site Technical Briefing For Operators On Operation, Maintenance, And/or Repair Of The Supplied Goods By The Supplier With The Following Compatible Accessories: 1. All Components Should Be Provided With Compatible Electric Motor - Connecting Wires And Cables Shall Conform To Electrical Code Of The Philippines - Moisture And Dust Proof - With Thermal Protection Device 2. Control Panel - Compatible To The Electrical Requirements Of The Feed Milling System - Must Contain Mimic Flow Of Operation - With Basic Safety Cut-off Features Including Emergency Shutdown Button - With On-off Push Button Switch And Individual Circuit Breaker For Each Motor - Dust Proof 3. One (1) Unit Weighing Scale - Mechanical Type - Capacity: 1 Ton (minimum) - Readability: 0.5 Kg 4. With Safety And Ease Of Operation Features - Path Walks - Markings/direction/borders - Provision Of Harness - Moving And Rotating Components Of The Feed Mill Must Be Covered - Two (2) Units Fire Extinguisher For The Control Room And Feed Milling Area * Dry Chemical, Stored Pressure Type, Capacity: 6.80kg, Minimum - Basic Safety Kits 5. With Additional 2 Dies, Shieve And 1 Spare Hammermill Teeth 6. Equipped With Electrical Requirements 7. Compatible Panel Board With Circuit Breakers - The Electrical Wire, Wire Accessories, And Piping/conduit To Connect The Transformer Unit To The Main Distribution Panel Board And To The Control Panel Of The Feed Milling System Shall Be Provided By The Bidder - The Electrical Wires, Panel Board, Circuit Breakers And Piping/conduit Must Be Brand New 8. Appropriate Heavy Duty Tools: Made Of Tempered Steel And Chrome Vanadium - With Heavy Duty Toolbox And Roll Up Tools Holder 9. With Appropriate Mounting Frame - All Component Of The Feed Mill Shall Be Installed With Mounting Frame And Fitted With Brackets 10. All Major Components And Parts Of The Feed Should Be Painted Powder Coated. For Mounting Frames, Path Walks And Catwalks Should Be Painted Finish, With Rust-proofing Primer And Final Paint Color 11. With Appropriate Silent Type Generator Set 12. With Converter (from Single Phase Power To 3-phase Power) Completion Of The Works Is Within Ninety (90) Working Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy-five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours At 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture - Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From November 6-26, 2024 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 14 November 2024, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 26 November 2024, 1:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 26 November 2024, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa; C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Requirements May Be Soft-bound/fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed, As Needed, By The Bidder/authorized Representative On Each And Every Page Thereof. E. The Technical Specifications Of The Project (as Part Of Tab F - Project Requirements) Must Be Duly Signed/countersigned And Sealed By A Licensed Agricultural And Biosystems Engineer In Accordance With Republic Act 8559 Or Republic Act 10915. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No.:(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ November 5, 2024 Approved By: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2024-infra-035

Details: Description Republic Of The Philippines City Of Dumaguete Bids And Awards Committee Invitation To Bid For The Job Order: Construction Of Socialized Housing For “banilad Plainsview Housing” Located In Barangay Banilad The City Of Dumaguete Thru Its Bids And Awards Committee (bac), Invites All Interested Manufacturers, Suppliers, Dealers And/or Distributors To Apply For Eligibility And To Submit Bids For The Supply Of: Job Order:, P93,425,506.47 Scope Of Works: 1. Item #1 Facilities For The Engineer A. 1 Construction Of Field Office For The Engineer. A. 2 Provision Of Furnitures, Fixtures, Equipment And Appliances For The Field Office. A. 3 Provision Of Progress Photographs. 2. Item #2 Other General Requirements B.1 Permits And Clearances B.2 Provisions For Project Billboards/signages B.3 Occupational Safety And Health Programs B.4 Mobilization/demobilization 3. Earth Works (for 2 Buildings) A. Excavation Works Column Footings And Wall Footings B. Excavation Works For Cisterns, Septic Tanks, Grease Traps And Catch Basins C. Embankment (ballastro Fill For Ground Floor Slab) 4. Reinforced Concrete Works (for 2 Buildings) A. Construction Of Column Footings With Gravel Bedding (0.10m. Thk.) B. Construction Of Grade Beams C. Construction Of Concrete Columns (all Floor) D. Construction Of 2nd Floor Beams E. Construction Of 3rd Floor Beams F. Construction Of 4th Floor Beams G. Construction Of Roof Beams H. Construction Of Cantilever Beams I. Construction Of Wall Footings J. Construction Of Ground Floor Slabs K. Construction Of Concrete Parkings And Pathways L. Construction Of Concrete Flooring/slab With Steel Deck At 2nd, 3rd And 4th Floors M. Construction Of Concrete Stairs And Landing (4 Units) N. Construction Of Concrete Gutter With Waterproofing O. Construction Of Concrete Windom Jambs P. Construction Of Concrete Mouldings Q. Construction Of Ramp At Ground Floor R. Construction Of Storage Water Tank (cisterns) 2 Units S. Construction Of Roof Deck And Water Tank Platforms 5. Formworks And Scaffoldings (for 2 Buildings) A. Installation/removal/transfer Of Formworks And Falseworks 6. Masonry Works (for 2 Buildings) A. Installation Of 4” Chb Walls And Partitions With Plain Cement Finish (both Sides) For All Floors Combined B. Installation Of Kitchen Sink With Plain Cement Finish For All Floors C. Installation Of Plant Boxes With Plain Cement Finish For All Floors D. Construction Of Septic Vault (4 Units), Grease Trap And Catch Basin. 7. Carpentry Works: (for 2 Buildings) A. Installation Of Ceiling Framing And Ceiling Boards At 4th Floor B. Installation Of Wooden And Pvc Doors Including Door Jambs For All Floors-ground, 2nd, 3rd And 4th C. Installation Of Wooden And Pvc Doors Accessories For All Floors – Ground, 2nd, 3rd And 4th 8. Glass Works: (for 2 Buildings) A. Installation Of Glass Jalousie Windows With Aluminum Frames For All Floors. 9. Steel Works (for 2 Buildings) A. Fabrication And Installation Of Steel Trusses (14 Units) B. Fabrication And Installation Of Steel Girts C. Fabrication And Installation Of Steel Railings At Stairs And Hallway 10. Roofing Works (for 2 Buildings) A. Installation Of Long Span Rib Type Roofing Pre-painted At 4th Floor B. Installation Of Plain Gi Shts Ridge Rolls At 4th Floor 11. Tiling Works (for Two Buildings) A. Installation Of Floor And Wall Tiles At Comfort Rooms For Ground, 2nd, 3rd And 4th B. Installation Of Tiles At Kitchen Sink For Ground, 2nd, 3rd And 4th Floors 12. Painting Works (for 2 Buildings) A. Painting Of Concrete Columns For All The Floors B. Painting Of Concrete Beams For All The Floors C. Painting Of Roof Beams For 4th Floor D. Painting Of Interior And Exterior Wall Of The Entire Building E. Painting Of Ceiling For Ground, 2nd, 3rd And 4th Floors F. Painting Of Concrete Stairs And Landing G. Painting Of Roof Framing And Steel Railings H. Painting Of Concrete Gutter I. Painting Of Wood Works – Wooden Jambs And Wooden Doors 13. Plumbing Works (for 2 Buildings) A. Installation Of Plumbing Rough – Ins For Wasteline And Waterline (ppr Pipes And Accessories) B. Installation Of Plumbing Fixtures For Wasteline And Waterline C. Installation Of Overhead Water Tanks Pvc (4 – Units – 2000 Gals) With 2 Hp Electric Motor Pumps With Accessories – 2 Units D. Plumbing Works For Water Storage Tank (cistern) E. Installation Of 96 Units Water Meter (sub Meter) For Individual Units And 2 Units Water Meter For The Two (2) Buildings F. Installation Of Downsprouts With Catch Basins At The Ground Level. G. Installation Of Fire Hose Cabinets With Hose Racks (8 Units) H. Installation Of Fire Extinguishers – 8 Units I. Installation Of Brass Siamese Twin Connectors – 2 Units J. Installation Of Smoke Detectors And Sprinkler System 14. Electrical Works (for 2 Buildings) A. Lay-out Of Flexible Tubes, Utility Boxes And Panel Boards B. Installation Of Electrical Rough-ins C. Installation Of Electrical Fixtures D. Installation Of 96 Units Kwh Meter (sub Meter) For Individual Units And 2 Units Kwh Meter For The Two (2) Buildings (common Areas) And One (1) Unit Main 3 – Phase Metering E. Installation Of Fire Alarm Bell For Every Floor For The Two (2) Buildings. F. Energize G. Fdas (fire Safety Provisions) H. Installation Of 3-75 Kva I – Phase Distribution Transformer For The Entire Two (2) Buildings. Terms Of Reference For Abovementioned Project, To Wit; 1. It Is So Required That The Contractor Who Is The Winning Bidder Must Implement The Project Duly Awarded To Them And Not To Be Performed By A Sub-contractor. It Has Been Observed That The Main Contractor After Winning The Bid Will Hire A Sub-contractor And Do The Assigned Tasks For Them. This Act Must Be Regulated And Discouraged. 2. The Contractor Who Participates In Bidding And Will Win The Bid Must Own The Equipment To Be Used For The Project So As Not To Hamper/delay The Project Implementation And Completion. However, Should Lease Of Equipment Be Necessary, The Lease Contract Must Provide That The Equipment Be At The Work Site For The Duration Of The Construction Activity. 3. Since Occupational Safety And Health Program Is A Pay Item In The Contracted Projects The Contractor Must Ensure Safety Above All In All Site Activities And Wearing Of Ppe’s – Personal Protective Equipment For The Workers On Field Must Be Adhered To Carried Out. Purpose: Construction Of Socialized Housing For “banilad Plainsview Housing” Located In Barangay Banilad Approved Budget For The Contract: Php93,425,506.47 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The City Of Dumaguete Now Invites Bids For Job Order: Construction Of Socialized Housing For “banilad Plainsview Housing” Located In Barangay Banilad. Bidders Should Have Completed And/or Accepted, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly Section Ii, Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criteria As Specified In The Implementing Rules And Regulations Part A (irr-a) Of Republic Act 9184 (r.a. 9184), Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizen/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders Must Secure Eligibility Requirements And Bid Documents From The Secretariat, Bids And Awards Committee, Office On General Services, City Hall Compound, Dumaguete City. For More Information, Contact The Bids And Awards Committee Secretariat, Office Of General Services, City Hall Compound, Dumaguete City, Tel. No. 22-524-29/225-3956/225-5871. A Complete Set Of Bidding Documents May Be Purchase By Interested Bidders From November 07, 2024 To November 28, 2024 From Address Above And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of P50,000.00. The Schedule Of Activities Is As Follows: 1. Issuance Of Bid Documents November 07, 2024 2. Pre-bid Conference November 14, 2024 10:00 A.m. 3. Submission And Opening Of Bids November 28, 2024, 10:00 A.m. Sealed Bids/proposals Will Be Received At The Office Of General Services, City Hall Compound, Dumaguete City Not Later Than November 28, 2024 And Bid Opening Shall Be On Thursday, November 28, 2024 At 10:00 (ten O’clock) In The Morning At The Office On General Services, City Hall Compound, Bids Will Be Opened In The Presence Of The Bidders Or Representatives Who Choose To Attend. Late Bids Shall Not Be Accepted. Prospective Bidders Must Not Be Related To The Head Of The Procuring Entity Or Any Member Of The Bids And Awards Committee Or Its Secretariat Either By Consanguinity Or Affinity Up To The Third Civil Degree. All Bids Shall Be Accompanied By A Bid Security Payable To The City Of Dumaguete In Any Of The Acceptable Forms And In The Amount Stated In Sec. 27 Of Ra 9184. The Same Shall Guarantee That, After Receipt Of The Notice Of Award, The Winning Bidder Shall Enter Into Contract With The City Of Dumaguete Within Ten (10) Calendar Days. Copies Of This Invitation Are Posted At The Gso Bulletin Board, Dumaguete Public Market Complex, Province Of Negros Oriental General Services Office Bulletin Board, Philgeps And Dumaguete City Engineer's Office Bulletin Board. The Bids And Awards Committee Reserves The Right To 1) Reject Any Or All Bids, 2) Waive Any Defects Or Informalities Therein, 3) Or Accept Any Bids/ Or Offer/s Which It May Consider To Be Most Advantageous And Beneficial To The Government 4) To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Dumaguete City, November 06, 2024 Atty. Camelo D. Pidor, Jr. Chairman

Details: Description I General Requirements I.1 Contactors Temporary Facilities And Field Office Months 8 I.2 Material Testing Lot 1 I.3 Safety Signages And Barricades Lot 1 I.4 Construction Safety And Health Lot 1 I.5 Project Billboard Unit 2 I.6 Permits And Clearances I.6.1 Occupancy Permit Lot 1 I.6.2 Ecc Permit Lot 1 Ii Concrete Works Ii.1 Cast In Place Concrete, Fc'=23.13 Mpa (3500psi) Second Floor Ii.1.1 Lintel Beam Cu.m 4 Ii.1.2 Stiffiner Column Cu.m 2 Ii.2 Cast In Place Concrete, Fc'=27.4 Mpa (4000psi) Second Floor Ii.2.1 Column Cu.m 10 Ii.2.2 Roof Beam Cu.m 26 Ii.2.3 Stairs (stair 1 And 2) Cu.m 14 Iii Reinforcing Steel Bars (inclusive Of Tie Wire Ga.#16) Iii.1 Reinforcing Steel (grade 40 ,fy=276 Mpa Inclusive Of Tie Wire Ga. #16) Kgs 11,927.54 Iii.2 Reinforcing Steel (grade 60 ,fy=414 Mpa Inclusive Of Tie Wire Ga. #16) Kgs 13,173.54 Iv Formworks And Scaffoldings Second Floor Iv.1 Column Sq.m 144 Iv.2 Roof Beam Sq.m 284 Iv.3 Lintel Beam Sq.m 32 Iv.4 Stiffiner Column Sq.m 33 Iv.5 Stairs (stair 1 And 2) Sq.m 100 V. Masonry Works V.1 Second Floor V.1.1 Exterior Wall (6"chb 700 Psi Including 12mm Thk Plastering) Sq.m 173 V.1.2 Interior Wall (4"chb 700 Psi Including 12mm Thk Plastering) Sq.m 207 Vi Doors And Windows Second Floor Vi.1 Doors And Accessories Inclusive Of Painting Vi.1.1 D2 - 900mm Flush Door (single-acting Door) W/ View Window Set 4 Vi.1.2 D4 - 800mm Flush Door (single Acting Door) Set 4 Vi.1.3 D7 - 700mm Pvc Door (single Acting Door) Set 4 Vi.2 Windows With Accessories Vi.2.1 W1 - 4panels - Jalousie Window On Aluminum Frame Set 2 Vi.2.2 W2 - 2panels-jalousie Window On Aluminum Frame Set 4 Vi.2.3 W4 - 6mm Ordinary Glass - Transparent Fixed Glass Awning Window Incl. Framing Set 2 Vi.2.4 W5 - 6mm Ordinary Glass - Transparent Fixed Glass Awning Window Incl. Framing Set 1 Vi.2.5 W7 - 6mm Ordinary Glass - Transparent Fixed Glass Awning Window Incl. Framing Set 4 Vi.2.6 W10 - 6mm Ordinary Glass - Transparent Fixed Glass Awning Window Inc. Framing Set 3 Vii Finishes Vii.1 Floor Finishes Vii.1.1 Ground Floor Vii.1.1.1 300mm X 300mm Wall Tiles (comfort Room) Sq.m 62 Vii.1.2 Second Floor Vii.1.2.1 Ff01 - Smooth Concrete Cement Finish Including 100mm Concrete Topping Sq.m 186 Vii.1.2.2 Ff02 - 300mm X 300mm Non-slip Porcelain Tiles Sq.m 19 Vii.1.2.3 Ff03 - 600mm X 600mm Non-slip Porcelain Tiles Sq.m 126 Vii.1.2.4 300mm X 300mm Wall Tiles (comfort Room) Sq.m 55 Vi.2 Painting Works Vi.2.1 Ground Floor Vi.2.1.1 Interior Wall Top-coat Paint Finish Sq.m 250 Vi.2.1.2 Exterior Walls Including Corridor Ceiling Sq.m 509 Vi.2.1.3 Fiber Cement Board Ceiling Sq.m 237 Vi.2.2 Second Floor Vi.2.2.1 Exterior And Interior Walls Including Skim Coat Sq.m 810 Vi.2.2.2 Fiber Cement Board Ceiling (rooms And Hallway) Sq.m 286 Viii Carpentry Works Viii.1 Ceiling Works Viii.1.1 Ground Floor Viii.1.1.1 Cf01 - 3.5mm Thk Fiber Cement Board On Light Metal Framing Sq.m 186 Viii.1.2 Second Floor Viii.1.2.1 Cf01 - 3.5mm Thk Fiber Cement Board On Light Metal Framing Sq.m 234 Viii.1.2.2 Cf02 - Acoustic Board 2x4x5/8, Fine Fissured On Tee Runner Framing Sq.m 52 Viii.1.2.3 0.4mm Thk Pre-painted Metal Spandrel With Air Vent On Metal Framing Sq.m 149 Viii.2 Partition Works Viii.2.1 Foldable Partition Fabric Acoustic Sq.m 17 Ix Steel Works Ix.1 Roof Framing And Steel Trusses Ix.1.1 Steel Trusses Ix.1.1.1 2"x2"x1/4" Angle Bar Ln.m 481 Ix.1.1.2 1-1/2" X 1-1/2" X 3/16" Angle Bar Ln.m 582 Ix.1.2 C-purlins Ix.1.2.1 140mm X 41mm X 2.0mm C-purlins Ln.m 1076 Ix.1.3 Sag Rod Ix.1.3.1 12mm Dia. Plain Round Bars Ln.m 113 Ix.2 Pre-painted Roofing Including Bended Accessories Ix.2.1 0.50mm Long Span Pre-painted Ribbed Type, Red Color Gi Sheet Ln.m 536 Ix.2.2 0.50mm Bended Spanish Gutter (red) Ln.m 40 Ix.2.3 0.50mm Bended Gutter Flashing (red) Ln.m 40 Ix.2.4 0.50mm Bended End Flashing (red) Ln.m 108 Ix.2.5 0.50mm Metal Fascia Ln.m 108 Ix.2.6 1"x1"x4mm Fascia Frame Ln.m 108 Ix.2.7 Insulation Foam 10mm, Double Sided Sq.m 483 Ix.3 Stairs, Ramp And Second Floor Corridor Metal Railings Ix.3.1 Stainless Steel (304) Round Tube 50mm X 6mm X 1.5mm, Handrail Ln.m 242 Ix.3.2 Stainless Steel (304) Round Tube 50mm X 6mm X 1.5mm, Balusters Ln.m 83 Ix.3.3 Aluminum Stair Nosing 1 1/2 X 8ft. X 1.2mm Thick Ln.m 80 Ix.4 1-3/4" X 3" Aluminum Tubular Wood Finish Vertical Slots Ln.m 22 Ix.5 Green Wall Panel Unit 1 Ix.6 Glass Roof Canopy Unit 1 Ix.7 Stainless Steel Letters And Logo Unit 1 X Electrical Works X.1 Lighting Luminaries X.1.1 24w Led Lamp Panel Recessed Downlight, Round, Daylight, Glass Covered To Specialist Recommendation Set 22 X.1.2 15w Led Lamp Panel Recessed Downlight, Round, Daylight, Glass Covered To Specialist Recommendation Set 4 X.1.3 2x28w Led Fluorescent Lamp, Recessed 300x1200mm Daylight, Rectangular To Specialist Recommendation Set 18 X.1.4 Twin 7.5w Led Lamp, Self-contained For Non-maintained Emergency Lighting For 3 Hours Duration. Set 15 X.1.5 Exit Light Set 3 X.2 Wiring Devices X.2.1 Switch: Two Gang, 15a, 230v, Flush Mount Set 8 X.2.2 Switch: One Gang Three Way, 15a, 230v, Flush Mount Set 2 X.2.3 Convenience Outlet, Duplex, 16a, 230v W/ground, Wall Flush Mounted Set 22 X.2.4 Outlet, Single, 15a, 230v For Exhaust Fans, Ceiling Fans, Emergency Lightings, Exit Sign And Hand Dryers Set 7 X.2.5 Hand Dryer 240v, Single Phase, 1400watts Set 3 X.2.6 Junction Box: 100x100x60mm, Square, Galvanized, #16 W/cover Ea 100 X.2.7 Outlet Box: 50x100x60mm, Galvanized, #16 Ea 115 X.2.8 Pull Box: 200x250x100mm, Galvanized, #18 W/cover Ea 2 X.3 Wires And Cables X.3.1 2.0mm2 Tw Wire-green M 50 X.3.2 3.5mm2 Thw Cu-green M 500 X.3.3 3.5mm2 Thw Cu-white M 500 X.3.4 22mm2 Thhn-2 Wire (fr)-yellow M 15 X.3.5 22mm2 Thhn-2 Wire (fr)-blue M 15 X.3.6 22mm2 Thhn-2 Wire (fr)-red M 15 X.4 Conduits, Boxes & Fittings X.4.1 Conduit: 20mm Dia. X 300mm Pvc L 104 X.4.2 Elbow: 32mmdia.pvc, Elbow: 32mmdia. Emt, Adapter W/lock Nut: 20mmdia.pvc, Adapter W/lock Nut: 32mmdia.pvc, Angle Bars, Unistrut Channel, Lock Nuts And Bushing Nuts, Conduit Clamps, Expansion Bolts. Etc. L 1 Xi Plumbing Works Xi.1 Plumbing Fixtures And Accessories/fittings Xi.1.1 Two Piece Water Closet With Complete Accessories Units 4 Xi.1.2 Urinal With Complete Accessories Units 1 Xi.1.3 Wall Mounted Lavatory And Complete Accessories Units 3 Xi.1.4 6" Stainless Kitchen Sink With Complete Accessories (processing Room) Units 6 Xi.1.5 6" Stainless Floor Drain Units 4 Xi.2 Waterline Xi.2.1 Second Floor Xi.2.1.1 3/4" Ppr Pipe Pn20 Ln.m 20 Xi.2.1.2 1 - 1/4" Ppr Pipe Ln.m 19 Xi.2.1.3 Fittings And Accessories Lot 1 Xi.3 Sanitary & Waste Line Xi.3.1 Second Floor Xi.3.1.1 100mm Dia. Pvc Pipe, S-1000 Ln.m 18 Xi.3.1.2 75mm Dia. Pvc Pipe, S-1000 Ln.m 1 Xi.3.1.3 Fittings And Accessories Lot 1 Xi.3.2 Downspout Xi.3.2.1 100mm Dia. Pvc Pipe, S-1000 Ln.m 250 Xi.3.2.2 Fittings And Accessories Unit 1 Xi.4 Non Metallic Diaphragm Pressure Tank ( 450 Liters) Inclusive Of Tank Fittings And Accessories Set 1 Xi.5 1hp Booster Pump Unit 2 Xii Mechanical Works Xii.1 Fire Protection - Lpg Xii.1.1 Equipment And Devices Unit 1 Xii.1.2 Pipes And Fittings Xii.1.2.1 Gi Pipes Schedule 40 Astm Including Fittings Lot 1 Xii.1.2.2 Lpg Pipe Secondary Containment Lot 1 Xii.2 Fire Protection-automatic Fire Sprinkler System Xii.2.1 Automatic Fire Sprinkler System Unit 1 Xii.2.2 Bi Pipes - Schedule 40 Astm Including Valves And Fittings Lot 1 Xii.2.3 Brackets And Supports Lot 1 Xii.2.4 Valves - Ul/fm Approved Lot 1 Xii.2.5 Flow And Monitoring Switches Unit 1 Xii.2.6 Firehose Cabinet W/ Complete Accessories Unit 4 Xii.2.7 Fire Extinguisher Unit 10 Xii.2.8 Fire And Jockey Pumps Including Pump Accessories - Including All Necessary Materials And Accessories To Complete The System Set 1 Xii.3 Fire Reserve Tank (34 Cu.m) Including Waterproofing And Accessories Unit 1 Xii.4 Pumphouse Unit 1 Xiii Auxiliary Works Xiii.1 Fire Detection And Alarm System (fdas) Xiii.1.1 Fire Alarm Control Panel And Accessories Unit 1 Xiii.1.2 Wires, Cables And Metallic Conduits Lot 1 Xiii.1.3 Roughing-ins Lot 1 Xiii.1.4 Miscellaneous Lot 1 Xiii.1.5 Grounding And Bonding Lot 1

Details: Description 1 Bolster Chair "designed For Children Who Need A Wide Base Of Support In Order To Achieve Good Pelvic Position, Lower Extremity Position, And Trunk Alignment For Stable Sitting." 1 2 Perkins Brailler-braille Typewriter "a Braillewriter Is Also Called A Brailler. A Mechanical Braillewriter Works A Little Bit Like A Typewriter. It Has Six Keys—one For Each Dot In A Braille Cell—a Space Bar, A Backspace Key, A Carriage Return, And A Line Feed Key. Like A Slate And Stylus, A Braillewriter Uses Heavyweight Paper That Will Hold The Braille Dots Well. It Takes Practice To Use A Brailler, But Some Kids Can Write Quickly Using One!" 2 3 Slate And Stylus "a Slate And Stylus Is Inexpensive, Portable Tool Used To Write Braille—similar To The Way Paper And Pencil Are Used For Writing Print. Slates Are Made Of Two Flat Plates Of Metal Or Plastic Held Together By A Hinge. The Slate Opens Up, Then Clamps Down To Hold The Paper. The Top Plate Has Rows Of Openings That Are The Same Shape And Size As A Braille Cell, While The Back Plate Has Rows Of Indentations In The Size And Shape Of Braille Cells. The Stylus Is A Pointed Piece Of Metal With A Plastic Or Wooden Handle. The Stylus Is Used To Punch (emboss) The Braille Dots Onto The Paper. The Tricky Part? The User Has To Learn To Write Braille Backwards So That It Reads Correctly When Removed From The Slate! With Practice, A Kid With A Slate And Stylus Can Write Braille Pretty Fast." 3 4 Teachable Touchables Sensory Squares "sensory Exploration Is Fun With Teachable Touchables Sensory Squares! This Versatile Set Provides A Variety Of Sensations To Explore, Including Scratchy, Slippery, Silky, And Soft Textures. Ideal For Tactile Play And Hands-on Learning, This Set Promotes Gross And Fine Motor Skill Development While Also Providing Opportunities To Build Descriptive Vocabulary." 10 5 Complete Interactive Reading 16 Book Set "use The Complete Set Of 16 Interactive Reading Books To Meet Your Iep Goals! This Set Was Created By An Autism Specialist With Years Of Classroom Experience To Help You Teach Your Special Students A Wide Variety Of Concepts. Each Book Was Developed After Interviews With Speech And Language Pathologists Across The Us. Interactive Reading Books Utilize The Power Of Visual Strategies So Beginning Readers Can Learn To Associate Pictures With Words. Students Move And Attach Picture Cards With Hook And Loop Fasteners To Match, Identify, Label, Sequence And Create Sentences While Learning To Read. The Books Are Fun And Rewarding For Children With And Without Special Needs. Teachers, Therapists, Assistants And Family Members Can All Use The Books With Their Students Or Children. The Books Can Be Used In A Group, 1:1 Or As An Independent Activity." 5 6 Soft Corner Set "the Grade School Soft Corner Set Is Perfect For The Sensory Room In Your Elementary School. This Set Includes A Large 26"" Cube, Slide, Bumpy Ramp, And Two Large Wedges. Use It In The Corner Of Your Classroom Or Sensory Room. Reconfigure It To Create An Obstacle Course During Your Ot Time. This Set Is Perfect For Building Gross Motor, Balance, And Coordination Skills." 1 "your Students Will Love Jumping, Climbing And Sliding On This Sturdy Set Made From Heavy Duty Foam And Vinyl That Features Reinforced Stitching. You Can Attach Pieces Together With Hook And Loop Pieces Sewn On The Sides. For Maximum Stability Set It Up In The Corner Of Any Room. Made With Wipeable Vinyl That Is Easy To Clean, This Set Is Designed To Stand Up To Lots Of Use In A Home, Classroom, Or Therapy Center." 7 Arcada Swing Stand And Chair Arcada Free-standing Stand Provides The Anxious Or Overstimulated With A Safe Calming Space Or Vestibular Input To Those Who Need It. This Stand Is Designed To Work With Both Single Point Hammock Chairs And The Joki Swing. 2pcs A Detachable Safety Net That Keeps Users From Swinging Too Aggressively. This Protects The Swing From Tipping. "a Wide 5'1"" X 4'11"" Base That Provides Lots Of Stability." Full Frame Is Made Of Powder Coated Galvanized Steel. An Adjustable Rope Fastening System Allows You To Easily Adjust The Height Of The Swing. It Has A Max Load Of 350 Pounds And Can Work With Both Kids And Adults. 8 Rotation Board With Handles "this Balancing Board Features An Anti-skid Surface So Students Can Stand Or Sit On It With Confidence. Use It To Provide Vestibular Input As Your Students Rock Side To Side. Or Have Your Students Sit On It, Hold On To The Handles, And Spin It For Even More Vestibular Input." 3 "four Padded Handles And A 28"" X 28"" Surface Allows Two Students To Sit And Play At A Time. Two Base Mounts (1.2"" And 1.6"") Allow You To Increase The Angle Of The Board To Help Your Students Continue To Build Their Core Muscles And Balance Skills As Their Skills Increase." Max Load: 125 Pounds Size: 28 X 28 X 6 Inches 9 Squeeze Seat "your Students Will Love The Deep Pressure The Squeeze Seat Provides! Its Innovative Design Squeezes You When You Sit In It. Give Your Students A Calming Deep Pressure ""hug"" To Help Their Systems Organize. Designed With Educators In Mind This Chair Features Easy To Clean And Durable Vinyl As Well As Reinforced Stitching. The Bottom Of The Chair Has A Small Flat Section That Provides Stability. However, You Can Also Rock It Back And For For Additional Vestibular Input." 1 Max Weight: 150 Pounds "size: 29"" X 13"" X 25.5"" " Recommended Ages: 2-12 Years. 10 Best Braille Toys For Kids Who Are Blind "the Best Way For Any Child To Learn To Read Is Through Constant Exposure To The Written Language… And Through Play! Sighted Children Play With Alphabet Blocks Or Simple Word Puzzles When They Are Young To Help Develop A Foundation For Literacy, And Blind Children Have The Same Opportunities With Toys In Braille." 2 11 Miniland Educational - Activity Buttons With Laces 2 Pcs Brand-miniland Age Range (description) Kid Color-multicolor Item Dimensions L X W X H: 9.25 X 7.68 X 2.95 Inches Material-plastic About This Item Kids Discover The Fun In Playing With These Brightly Colored Miniland Activity Buttons Each Button Has A Number In Relief Plus Its Equivalent Braille Symbol This Lacing Buttons Set Is A Part Miniland Educational Toys For Play And Learning "includes Big Buttons With 1 Of 5 Holes In Bright Colors For Sequencing & Sorting, Long Laces And Activity Worksheets" Appropriate For Children Ages 3 To 6 Years Old 12 "learning Resources Interlocking Base Ten Starter Set," "learning Resources Interlocking Base Ten Starter Set, Early Math, Counting, Connecting Blocks, 141 Piece Set, Ages 6+" 5pcs "units Are Made Of Durable, Washable Plastic For Years Of Hands-on Activities" "help Students Understand Abstract Base Ten Concepts; Including Place Value, Estimation, Operations And Fractions" "141 Pieces Include: 100 Units, 30 Rods, 10 Flats, 1 Cube, And 96-page Base Ten Activity Book" Starter Set Perfect For Use With 3-4 Students 13 Granstand Iii Modular Standing System - 1 Pc "the Granstand Iii Comes Standard With An Expandable Transport Base With 3"" Plastic Casters, Height And Depth Adjustable Chest Pad, Height And Depth Adjustable Clear Table Top, Width And Depth Adjustable Foot Pads, Pull-to-place Seat Sling, And Depth And Height Adjustable Knee Pad. Weight Limit 250 Lbs Base Dimensions Closed 27.5"" W X 40.5 "" D Base Dimensions Open 35.5"" W X 40.5"" D Standard Tray Size 24"" W X 18"" D" 14 Kidney-shape Table With Learner's Chair - 10 Pcs "key Features Includes Four Stacking Chairs And One 36"" X 72"" Kidney-shaped Activity Table The 16"" Seat Height Is Recommended For Fourth Through Sixth Grade Table Tabletop Material: 1 1/8"" Thick Leg Material: Powder-coated Tubular Steel Height: 21"" - 30"" Adjustable In 1"" Increments Width: 36"" Length: 72"" 15 Gas Range And Oven - 2 Pcs "3 Gas Burners, 1 Hot Plate Stainless Drip Tray Gas Thermostat Oven Electric Grill With Rotisserie Black Enameled Body 50x50cm Weight: 39.5 Kg 16 Phonics Phones - 1 Pc "pack Of 16: Perfect For Classrooms. You Get 16 Whisper Phones For Classroom Reading. 4 From Each Color. Comes In Red, Purple, Green, & Pink. Our Phonic Phone Is A Great Addition To Your Phonic Manipulative Materials, Speech Therapy Toys For Kids Package Dimensions: 8.9 X 8.9 X 4.1 Inches Item Weight: 8.8 Ounces" 17 Augmentative Communication Systems - 2 Pcs "pocket Go-talk 5-level Communication Device Five Message Buttons At 2.2cm X 3.8cm (7/8” X 1 1/2”) Five Recording Levels 4.16 Minutes Total Recording Time (10 Seconds Per Message) Dial Controlled Volume Button Excellent Sound Quality Two Aa Batteries Included Low Power Consumption Record And Level Lock Capable 7.6cm X 13.6cm X 3.8cm 212 Grams (7.5 Oz) " 2 18 Call Lights - 1 Pc "with Many Colors: Red, Blue, Green Or Mix Different Color For Different Service Type It Can Work With 30 Transmitter In Max. With Separate Output Power Supply: Dc5v The Prompting Sound Can Be Turned On/off Dimension: 78*78*60mm Color: White" 19 Adjustable Height Exercise Steps - 1 Pc "color: Teal/purple Brand: Us Weight Item Weight: 80 Ounces Item Dimensions Lxwxh: 30 X 15 X 8 Inches About This Item Made In The United States From Durable, Recyclable High-density Polyethylene Circuit-size (28. 5"" L X 14. 5"" W X 4"" H) Aerobic Platform, 4 Original Risers, And Streaming Videos Platform Features Grooved, Nonslip Top And Supports Up To 275 Lbs Four Nonskid Feet On Each Riser And Platform Prevents Sliding Or Scratching Floors Vary Workout Difficulty By Adjusting Platform Height From 4"" To 6"" To 8"" Using Risers" 20 Wedge Bolsters - 1 Pc "use A Wedge Bolster Along With Our Quicklock Face Rest Platform To Create A Quick And Easy Backrest For Any Portable Or Stationary Massage Table. Dimensions: 24""w X 10""h X 24""l With A Flat Top And A 36"" Incline." 21 Round Bolsters "6"" Round Bolster 1 Pc Bolsters Are Made With Earth Friendly Materials Of Cfc Free Foam And Pvc Free Upholstery Choices. High Quality Foam Offers Comfortable Support And Allows Clients To Fully Relax, And Come With Pull Handles At Both Ends For Therapist Convenience. Unlimited Versatility Makes This Comfortable And Supportive Cushion Your Building Block For Positioning. Measures 6"" D X 26"" L. Made Of Aero-cel Foam: Won't Flatten Or Get Lumpy Like Dacron Bolsters Incredibly Supple Conforms To Fit Curves Firm Gentle Support" 22 Lcd Projector - 2 Pcs Eb-w41, White Light Output (normal/eco): 3,600lm/2,235lm, Colour Light Output: 3,600lm, Dimension Excluding Feet(wxhxd): 302x77x234 Mm, Weight 2.5 Kg" 2 23 Carpet - 3 Pcs "4'x6' Soft Carpet For Lwds While Taking Physical, Psychomotor Assessment Soft Solids Classroom Carpets Carry A Lifetime Abrasive Wear Warranty. Features An Anti-static Treatment And Made With N6 Recyclable Yarn Type. Meets Or Exceeds Class I Fire Rating As Specified In Nfpa Life Safety Code 101." 24 Treatment Table - 1 Pc "product Name: Multi Functions Physical Electric Therapy Treatment Table Size: L2040*w560*h550-820mm Product Feature 1. Electric Operation,3 Sections, New Design Epoxy Metal Frame. 2. Equipped With 3 Motors For Height, Back And Leg Rest Adjustment. 3. Height Adjustments For The Arm Rests. 4. With Artificial Leather Cover On The Head, Seat, Leg Areas. 5. 4 Luxurious Castors With Brake. Function: Suitable For Hospital Electric Therapy Treatment Table Use." 25 Hand Dynamometer - 2 Pcs "type: Electronic Counting Gripper Function: Comprehensive Fitness Exercise Material: Abs Size: 15cm/5.90""x10.5cm/4.13""x2cm/0.79""" 26 Soft And Foldable Ball Pit - 1 Pc "small Round: 63"" Diameter X 15.7""h. Weighs 14.3 Lbs. Holds 4-5 Kids And 1250 3"" Diameter Balls. Color: Blue. Small Padding: 63"" Diameter X 0.78""h. Weighs 14 Lbs. Small Padding: 63"" Diameter X 0.78""h. Weighs 14 Lbs. Large Round: 78.7"" Diameter X 15.7""h. Weighs 18.5 Lbs. Holds 6-7 Kids And 1500 3"" Diameter Balls. Color: Blue. Large Padding: 78.7"" Diameter X 0.78""h. Weighs 18.5 Lbs. Large Padding: 78.7"" Diameter X 0.78""h. Weighs 18.5 Lbs. Medium Square: 78.7""l X 47.2""w X 15.7""h X 1.9""d. Weighs 20 Lbs. Holds 4-5 Kids And 1000 3"" Diameter Balls. Pistachio, Blue, Orange And Lilac. Medium Padding: 78.7""l X 47.2""w X 0.78""h. Weighs 20 Lbs. Large Square: 78.7""l X 78.7""w X 15.7""h X 1.9""d. Weighs 27.6 Lbs. Holds 6-7 Kids And 1250 3"" Diameter Balls. Pistachio, Blue, Orange And Lilac. Large Padding: 78.7""l X 78.7""w X 0.78""h. Weighs 27.5 Lbs. Made Of Pvc Upholstery. Filled With Polyethylene Foam Surface Wash. Air Dry." 27 Goal Ball Kit - 5 Pcs "goalball Kit (includes Everything You Need To Start A Goalball Program – 2 Ibsa-certified Goalballs, 6 Eyeshades, 6 Pairs Of Knee/elbow Pads, A Reusable Prefabricated Court And 2 Rolls Of Court Tape) " 28 Triumph Competition 100mm Resin Bocce Ball - 5 Pcs 107mm Official Bocce Ball Set Regulation Size And Weight 920g/2.03lbs 29 """true-grip"" Indoor Shot Put Blue Shell" - 5 Pcs "true Grip"" Indoor Shot Put – It Has A Hard Shell That Provides A Good Grip, Bounces Very Little, And Maintains Its Shape. ""soft"" Indoor Shots Are Tough, Polyvinyl Plastic Shots That Change Shape And Don't Bounce. ""super Soft"" Indoor Shot Puts Are The Softest Indoor Shots Made – The Vinyl Shots Do Not Bounce Or Lose Shape And Are Excellent For Wood Floors. ""pro-line"" Tungsten Indoor Shots Are The Smallest Indoor Shot Puts Made. They Are Popular Because Their Diameter Is Similar To An Outdoor Shot Put." 2k 6 Lb. 30 Wind Up Toys - 5 Pcs "wind Up Toys,powered By A Metal Spring That Is Tightened By Turning It,classical Funny Simple Games,non-toxic And Odor-free. Perfect Gift For Kids Party Favors, Goodie Bags, Classroom Rewards, Stocking Stuffers, Easter Egg Stuffers. Clockwork Toy, Each Character Does A Different Trick Such As Swimming In Water,flipping,sliding,spinning,walking,shaking Head Or Tail And Many More To Be Discovered. Wind-up Toys Measure About 2 Inch, Including Dinosaur,egg,cat,bird,caterpillar,beetle And Car Etc. Package Content: 16 No Duplicate Wind Up Toys(contents And Color May Vary). Every One Of Them Has A Windup Mechanism." 31 Wordless Picture Books 5pcs "language ? : ? English Hardcover ? : ? 32 Pages Reading Age ? : ? 4 - 6 Years Item Weight ? : ? 1.28 Pounds Dimensions ? : ? 10.25 X 0.5 X 12 Inches" 32 Articulation Cards 5pcs "7 Illustrated Card Decks (448 Cards, 3¼"" X 4¼"") – Each Deck Of 32 Picture-word Card Pairs Targets A Specific Speech Sound - P, B, T, D, M, J, Includes Storage Tins In A Metal Tote, Master Word Lists, 50 Smiley Face Tokens, And Game Ideas Card Set 1, Card Set 2 And Card Set 3 " 33 Hand Dynamometer 2pcs "type: Electronic Counting Gripper Function: Comprehensive Fitness Exercise Material: Abs Size: 15cm/5.90""x10.5cm/4.13""x2cm/0.79""" 34 Core Peak Bolsters 2pcs "core Peak Bolster Peaked Shape Fits Comfortably Under Your Knees Precision-cut Foam 10"" X 24"", With 7"" Peak Available In Blue, Gray, Or Black" 35 Assessment Tool- 5pcs "set Of Assessment Tools For Behavioral, Psychological, Intellectual, Motor, Socio-emotional (5 Copies Per Set) Like: Ravens Progressive Matrices Tests, Goodenough-draw A Person Test, Wechsler Intelligence Scales For Children (wisc-v)" 36 Sofa - 1 Pc "seating Capacity 2 Velvet: 100 % Polyester Frame Material Manufactured Wood Leg Material Manufactured Wood Seat Fill Material Foam Seat Construction Mdf Back Fill Material Foam Tufted Cushions Square Arm" 37 Portable Electronic Magnifier-1pc "5 Inch High-definition Color Lcd Screen. Dual Camera Design, Get View Both Far And Near. Continuously Adjustable Magnification From 4x-32x." Sharp Full Color Mode And 14 Other Modes For Reading. Rechargeable Lithium Battery With 4 Hours Continuous Use. Adjustable Brightness Of The Backlight And Adjustable Intensity Of Fill-in Light. Screen Lock: Freeze A Text Image On Screen For Easier Reading. Electronic Curtain Function: Highlight On Reading Text Horizontally And Vertically To Avoid Light Interference. Memory Function: Automatically Save All The Last Settings. 38 Sound System - 1 Pc "2-way Pa With Powered 8-channel Mixer And Bluetooth? Everything You Need To Be Heard Get Legendary Sound Quality With The Eon208p All-in-one Portable Pa System, Complete With An 8-channel Mixer, Bluetooth Audio And Included Akg Microphone. With..." 39 Sound System - 1 Pc "complete Pa System, * Pvi 4b Powered Mixer * Two Pvi 10 Speakers * Two Pvi 100 Dynamic Cardioid Microphones * Two Speaker Stands * Cables" 40 Microphones Super Cardioid Dynamic Microphone 10pcs 41 Aircon 2.5 Inverter Split-type Aircon 2pcs 42 Laptop Hp Laptop | 15 Inch | Intel I7 | 16gb Ram | 512gb | Windows 11 | Amd | 2 Yr Wty | Free Laptop Bag 18 43 Building Blocks Hb Mega/ Jumbo Building Blocks 88pcs Super Builder Jumbo Building Blocks Big Sizes (10 Sets) 10 44 Shape Intelligence Box K2-shop Shape Intelligence Box Wooden Toy (10 Sets) 10 45 Scrabble Original Portable English Word Spelling Board Game (tiles) 10 Sets 10 46 Ladder Kids Puzzle 33pcs Ladder Kids Puzzle Jigsaw Puzzles Baby Toddler Early Education Cartoon Animal (10 Sets) 10 47 Cylindrical Building Blocks Cylindrical Building Blocks Montessori Early Education Toys Wooden Pegs Pegboard Fine Motor Skills (10 Sets) 48 Wooden Rainbow Stacker Bollie Baby Wooden Rainbow Stacker Nesting Puzzle Blocks Educational Montessori Toys For Kids Baby (10 Sets) 10 49 Tangram Shape Puzzle Tangram Shape Puzzle With Pattern Cards (10 Sets) 10 50 Blocks Puzzle Hch Ze Geoanimo Blocks Puzzle Wooden Toy (10 Sets) 10 51 Soft Building Blocks Soft Building Blocks For Kids Diy Squigz Sucker Funny Silicone Blocks Education Toy (10 Sets) 10 52 Mushroom Nail Tall Stackers 25pcs Mushroom Nail Tall Stackers Peg Fine Motor Skills Toys Montessori Toys For Kids (10 Sets) 10 53 Shape Sorter Educ Toys Shape Sorter Educational Toy Montessori Toys Learning Toys Baby Geometric Shape Classification Box (10 Sets) 10 54 Laminating Machine A3/a4 Laminator Machine Hot/cold/reverse 220v Heavy Duty Laminating Machine Hot And Cold Laminator 5 55 Laminating Film Quaff Laminating Film Long Size 250microns 100sheets 5 56 Mirror Aluminum Frame (thickness 1/4 Inch X 4 X 8 Ft) 1 57 Mixing Bowl Stainless Steel 18 Cm/7 Inch 20 58 Mixing Bowl Stainless Steel 22 Cm/8.6 Inch 20 59 Mixing Bowl Stainless Steel 28 Cm/ 11 Inch 10 60 Mixing Bowl Stainless Steel 30 Cm/11.8 Inch 10 61 Flat Sheet Baking Tray Flat Sheet Aluminum Alloy 8x12 (0.14 Mm Thick) 8 62 Flat Sheet Baking Tray Flat Sheet Aluminum Alloy 9x13 (0.14 Mm Thick) 8 63 Flat Sheet Baking Tray Flatsheet Aluminum Alloy 10x14 (0.14 Mm Thick) 10 64 Round Cake Pan Round Cake Pan Aluminum Alloy 011 Gauge 4x3 10 65 Round Cake Pan Round Cake Pan Aluminum Alloy 011 Gauge 5x3 8 66 Round Cake Pan Round Cake Pan Aluminum Alloy 011 Gauge 6x3 8 67 Round Cake Pan Round Cake Pan Aluminum Alloy 011 Gauge 8x3 8 68 Square Pan Square Molder Cake/brownie Pan Aluminum Alloy 011 Gauge 4x4x2 8 69 Square Pan Square Molder Cake/brownie Pan Aluminum Alloy 011 Gauge 5x5x2 8 70 Square Pan Square Molder Cake/brownie Pan Aluminum Alloy 011 Gauge 6x6x2 8 71 Square Pan Square Molder Cake/brownie Pan Aluminum Alloy 011 Gauge 8x8x2 8 72 Loaf Pan/ Bread Cake Molder Loaf Pan/ Bread Cake Molder Aluminum Alloy 011 Gauge 6x3x 2 1/2 6 73 Loaf Pan/ Bread Cake Molder Loaf Pan/ Bread Cake Molder Aluminum Alloy 011 Gauge 7x3x 2 1/2 6 74 Loaf Pan/ Bread Cake Molder Loaf Pan/ Bread Cake Molder Aluminum Alloy 011 Gauge 8x3x 2 1/2 6 75 Cooling Rack Stainless Steel Non-stick Grid Tray Cake Rack/cooling Rack 25cmx27 Cm 20 76 Cooling Rack Stainless Steel Non-stick Grid Tray Cake Rack/cooling Rack 25cmx 40 Cm 20 77 Baking Tray Rack 6 Layer Baking Tray Rack (commercial) Thick Stainless Steel 7.5 Cm Ceiling Height/ 40x60 Cm Oven Size 2 78 Baking Tray Rack 12 Layer Baking Tray Rack (commercial) Stainless Steel 7.5 Cm Ceiling Height/ 40x60 Cm Oven Size 2 79 Baking Mixer Heavy Duty Commercial Stainless Steel Mixer 10 L (dough 1.5 Kg) 3 80 Work Bench 3-layer Stainless Steel Preparation Table Double Deck 180 X 60 X 80 Cm 3 81 Rolling Pin Wooden Rolling Pin For Baking 10 82 Piping Tip Decorating Icing 83 Pc. Set Piping Tips For Cake Decorating Icing With Nozzle Piping Bags 10 83 Espresso Machine Breville Barista Express Espresso Machine With Built-in Coffee Grinder And Milk Froth 2 84 5.0 Kg/0.1 G Digital Weighing Scale 5.0 Kg/0.1 G Digital Weighing Scale For Coffee/food With Timer 10 85 Kitchen Chopping Board "plastic Kitchen Chopping Board Set (color Coded: Blue, White, Green, Yellow)" 5 86 Blender "commercial Use Blender /heavy Duty Multi-purpose Blender 3 • 500 Watts Power • 25,000 Rpm Rotation Speed Motor • 1.5l High Capacity Glass Jar • Detachable Jar For Easy Cleaning • 6-point Stainless Steel Sus304 Blades • Auto-off Safety Switch When Jar Is Not On Place • With Rotary Knob For Variable Speed • With Led Lights Display • With 3 Quick Preset Functions: Smoothie, Pulse/clean & Ice Crush • Overheat And Over Current Double Protection • With Double Oil Seals And Bearings • Soft Start Program • With Airtight Lid • Stainless Steel Housing Shell Base • Anti-slip Base • With Power Cable Organizer • Ideal For Crushing Ice, Making Smoothies, Milkshakes, Cocktails And Etc. Dimensions: (l)17 X (w)17 X (h)43 Cm" 87 Saucers Set Of 6 Bread And Butter Plates (6 Inches Diameter) Material: Porcelain 10 88 Spatula Baking Spatula Silicon Material Length 28.2 Cm Width 5.4 Cm 20 89 Revolving Cake Stand Alluminum Alloy Revolving Cake Stand (12 Inches Diameter) 10 90 Whisk 12 Inches Heavy Duty Staineless Steel Wire Whisk 20 91 Dough Scraper Stainless Steel Dough Scraper With Scale Patry Scraping 20 92 Offset Spatula "set Of Stainless Steel Spatula For Icing Scraping 8"", 6"" And 4.5""" 20 93 Measuring Cup "7 Pieces With A Convenient 1/8 Coffee Scoop; Complete Set Of 7with Pouring Lip, Sizes Include 1/8, 1/4, 1/3, 1/2, 2/3, 3/4 And 1 Cup, Food Grade Material Of Stainless Steel, Dishwasher Safe," 2 94 Measuring Spoon "sizes: 1/8tsp (0.63ml),1/4tsp (1.25ml),1/2tsp (2.5ml), 1 Tsp(5ml), 1/2tbsp (7.5ml),1 Tbsp (15ml), High Quality Stainless Steel, Dishwasher Safe" 2 95 Milk Frother Handheld Battery Type Milk Frother For Coffee 5 96 Flour Sifter Manual Fine Mesh Stainless Steel Flour Sifter 40x8.5 Cm Diameter 10 97 Chiller Refrigerator Fujidenzo 10 Cu/ft Showcase Chiller With Freezer Top 1 98 Mugs 11 Oz White Ceramic Mugs 25 99 Plates "set Of Ceramic Plates- 11'', 9'', 6'' In Diameter" 50 100 Cookie Press Cutter 13 Pc. Set Cookie Press Cutter/maker 20 101 Cookie Molders 12 Pc/set Assorted Shapes Stainless Steel Cookie Molders 25 102 Glass 6 Pc/set Champagne/flute Wine Glass 6 Oz Capacity 12 103 Coffee Maker Hanabishi Coffee Maker Good For 12 Cups 4 104 Cup And Saucer 6 Pcs./set Ceramic White Coffee Cup And Saucer 4 105 Small Table With Chairs "kindergarden Table Heavy Duty - 50 Metal Legs 60cm X 120 Cm X 55 Cm Ht Php 2,500.00 Blue Color Rectangular Table 24x48 Php 2000 Chairs 34cm D X 35 Cm L X 28 Cm Ht X 52 Cm Total Ht. Php 400 .00 (4 Chairs)" 106 6 Seater Dining Table Material: Mahogany Wood With Glass Top 2 107 Sofa Sala Set Sala Set Black Leather Sofa With Glass Table Uratex Foam- Green 1 108 Double Door Refrigerator Carrier Refrigerator Two Door Top Freezer 20 Cu.ft 1 109 Pillows "pillow Shape: Rectangle -10 Pillow Weight: 0.95-1000 Grams Pillow Height: 12.7cm Pillow Width: 40.64cm Pillow Length: 66.04cm Pillow Size: 40 X 66 Cm Pillow Material: 100% Cotton Pillow Filing: Cotton Poly-fiber" 110 Pillowcase "2pcs Pillowcase Size: 1 X 28 Inches Material: Cotton & Polyester" 10 111 Blankets "100% Canadian Cotton, Soft Texture, High Quality Fabric Size: 52 X 90 Inch" 10 112 Double Broiler Steamer "2 Layer Stainless Steel Steamer Pot Large Capacity Soup Pot With Double Boilers Stockpot Cookware Cooking Tools Feature: Eco-friendly Model Number: Stainless Steel Thicken 2 Layer Steamer Pot Layers: Double Type: Double Boilers Sheet Size: 28cm Material: Stainless Steel Specification: Name: Steamer Pot Material: Stainless Steel Size: Thickened Double Steamer Pot-28cm/11.02inch Packing List: Steamer Pot*1" 2 113 Food Thermometer "weight: 80 G Dimensions: 218 X 34 X 20 Mm Operating Temperature: -20 To +50 °c Product-/housing Material: Abs Protection Class: Ip67 With Topsafe Product Colour: White Length Probe Shaft: 55 Mm Length Probe Shaft Tip: 17 Mm Diameter Probe Shaft: 3 Mm Diameter Probe Shaft Tip: 2.3 Mm Standards: En 13485 Battery Type: 3v Button Cell (cr 2032) Battery Life: 350 H Display Type: Lcd (liquid Crystal Display) Display Size: One-line Display Lighting: No Storage Temperature: -40 To +70 °c Temperature – Ntc Measuring Range: -50 To +275 °c Accuracy: ±1 % Of Mv (+100 To +275 °c) ±0.5 °c (-30 To +99.9 °c) ±1.0 °c (-50 To -30.1 °c) Resolution: 0.1 °c Reaction Time: T?? = 10 S (measured In Moving Liquid) Measuring Rate: 0.5 S" 4 114 Bread Toaster "2 Bread Toaster Includes Removable Crumb Tray For Cleaning Cancel, Reheat, Defrost Button Includes Bun Burner Variable Heating Control" 2 115 Kitchen Knife Set "5 Pieces Kitchen Knife Set Chef Knives Fruit Stainless Steel Knife Sharpener Rod Peller Scissors Pairing Tools Specifications: Item Name: Kitchen Knife Set Main Material: 3cr13 Stainless Steel Quantity: Note: Please Kindly Note That There Could Be A Few Deviations As The Result Of Manual Measurement. Thank You Package Information: Package Size: 31 * 28 * 2.5cm / 12.3 * 11.2 * 0.98in Package Weight: 700g Package List: 2 * Chef Knife 1 * Chopping Knife 1 * Knife Sharpener 2 * Fruit Knife 1 * Scissors 1 * Peeler" 116 Fire Extinguisher Fire Extinguisher 10lbs Abc Dry Chemical Refillable 10 117 Signage Panaflex Signage 10x2 1 118 Table Knife Stainless Steel Table Knife 10 119 Washing Machine Samsung 16 Kg Twin Tub Washing Machine 1 120 Frying Pan Flat-bottomed Stainless Steel Pan 12 Inches Diameter 5 121 Commercial Use Rice Cooker Kyowa 10l Capacity Rice Cooker With Aluminum Inner Pot/ Stainless Steel Cover 2 122 Rice Cooker "kyowa 1.8l, Non-stick Inner Pot Stainless Steel Cover With Inner Tray" 2 123 Electric Water Kettle Hanabishi 1.9l Stainless Steel Water Heater Electric Kettle 4 124 Vanity Mirror Table Set Vanity Dresser With Mirror And Chair With 80x30x140 Dimensions 1 125 Carpet European Carpet 120x160 Cm Brown Or Green Color 2 126 Flat Screen Tv "tcl 40 Inch Fhd Smart Android Tv - 40s5400a (google Assistant, Netflix, Youtube, Voice Remote)" 2 127 Lampshade Dimmable Nordic Style Night Lamp Desktop Table Lampshade Bedside Lamp Shade (cylinder) 2 128 Dishrack "orocan Kitchen Queen Dish Rack Cabinet, Dish Drainer, Dish Organizer" 2 129 Charger Plate "charger Plate | Elegant Charger Plates Gold Embossed Pvc 13 Inches Diameter, Plastic Tray, Table Set Up, Dining Table" 10 130 Glass 12 Pc/set Water Glasses 11 Oz. Capacity 5 131 Soup Bowls "6 Pcs./set Ceramic Bowls 6""- 36 Oz. Bowl Capacity" 5 132 Waffle Maker Hanabishi Belgian Waffle Maker Hsm90w 2 133 Food Steamer/warmer Hanabishi Food Steamer Hfs55 3 Level With Free Plastic Container 2 134 Donut Maker - 2 Electric Donut Makers 220v 1400w Non-stick Egg Cake Bread Baking Machine For Children Snacks Desserts Breakfast Makes 16 Donuts 135 Pastry Roller Machine "commercial Dough Roller Machine Stand Type Stainless Steel Power : 2.2kw (3hp) Voltage : 220v 60hz Production : 100kgs/hr Speed : 134rpm Weight : 117kgs Roller Length : 30cm (12inches)" 1 136 Pasta Maker Machine Stainless Steel Pasta Making Machine Noodle Maker Size : 150mm Adjustable Thickness Settings The Pasta Maker Machine Comes With 8 Customized Adjustable Thickness Settings And 2 Width Choose For Making Various Vermicelli (2.0mm) / Fettuccine (4.0mm) 2 137 Magnifying Glass Handheld Magnifying Glass Instrument For Reading 10 138 Bookstand Material: Wood / Book Holder Stand/ Adjustable 10 139 Abacus Reizen Abacus For The Blind 10 140 Cane For Blind Red White Folding Mobility Cane For Blind And Visually Impaired 25 141 Magnetic Building Blocks 130 Pcs./set Magnetic Building Blocks 6 142 Circle Hoops 10 Pcs./set Kids Outdoor Toy Hopscotch Jumping Ring Cirlce 10 143 Wooden Beads "montessori Wooden Beads Sequencing Toy Set, Stacking Blocka And Lacing Beads With Matching Shape Set" 20 144 Laundry Basket "mg 513 Laundry Basket W Handle 36lw X H X L (color By Basket: 1xwhite, 1xbeige, 1xgrey, 1xblack) 41cm X 45cm X 41cm" 4 145 Android Tablet "samsung Tablet Galaxy Tab A9 64gb-4gb Galaxy Tab A9's Thickness Is 8.0mm/ Screen Size Is 8.7""/ 1. Tablet | 2. Data Cable (c Type) | 3. Eject Pin" 15 146 Water Dispenser Hanabishi Bottom Loading Water Dispenser Hfswd-1900bl Black 3 147 Office Table "alyson Office Table Available In 2 Colors, Oak, And Walnut. Comes With 3drawer Mobile Pedestal And A Cpu Stand /width: 120 Cm Depth: 60 Cm Height: 76 Cm/ Table Top & Drawer Front: Mdf Side Panel & Support: Particle Board/ Top: 60 Kgs Drawer/shelf: 5 Kgs" 8 148 Office Chair "executive Chair Ht-7081a Mesh High Back Gray/ Color: Gray Dimensions: 61(w) X 58(d) X 109-123(h) Cm Weight: 15kgs Weight Capacity: 100kgs" 8 149 Stainless Milk Coffee Pitcher "stainless Steel Milk Jug Serving Pitcher / Material: Stainless Steel Color: 350ml: Top Diameter: Approx. 67mm/ 2.64inch Base Diameter: Approx. 78mm/ 3.07inch Height: Approx. 93mm/ 3.66inch 500ml: Top Diameter: Approx. 78mm/ 3.07inch Base Diameter: Approx. 91mm/ 3.58inch Height: Approx. 111mm/ 4.37inch" 6 150 Trampoline With Handrail "40-inch Jumping Surface Area Handrail Adjusts From 28.5"" To 36.5""h 16lbs. Holds Up To 300 Lbs" 5 151 Camera Dslr Eos 4000d 2

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Iv-a Canlubang Interchange, Brgy. Mayapa, Calamba, Laguna Invitation To Bid 1. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 1. Name Of Contract : Fy2024 Dpwh Infrastructure Program Construction/ Rehabilitation/ Improvement Of Facilities For Persons With Disabilities (pwd) And Elderlies/ Senior Citizens, Including Gender-responsive Facilities Construction Of Multi-purpose Building (senior Citizen Building), Brgy. Bangin, Agoncillo, Batangas Contract Id No. : 24d00293 Contract Location : Batangas Province Scope Of Works : The Scope Of Works For The Construction Of Multi- Purpose Building (senior Citizen Building), Brgy. Bangin, Agoncillo, Batangas Are Earthworks, Plain And Reinforce Concrete Work, Finishing And Other Civil Work And Electrical & Auxiliaries. Approved Budget For The Contract : ₱4,825,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 210 C.d. Size Range : Small B License Category : C & D Cost Of Bidding Documents : ₱5,000.00 2. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Sustainable Infrastructure Projects Alleviating Gaps (sipag) Major/strategic Public Buildings/facilities Structural And Resilience Program Construction Of Multi-purpose Building Including Facilities (dswd) Brgy. Marawoy, Lipa City, Batangas Contract Id No. : 25d00039 Contract Location : Batangas Province Scope Of Works : Earthworks - Clearing And Grubbing - Structure Excavation (common Soil) - Embankment From Borrow (common Soil) - Gravel Fill Structural - Lean Concrete - Structural Concrete, 3000 Psi - Structural Concrete, 4000 Psi - Reinforced Steel (deformed) Grade 40 - Reinforced Steel (deformed) Grade 60 - Formworks And Falseworks - Soil Poisoning - Damproofing Plumbing - Plumbing Fixtures - Cistern Architectural - Fiber Cement Board (4.5mm), Metal Frame For Ceilings - Wall - Finishing Hardware - Aluminum Glass Window – Awning Type - Aluminum Glass Window – Fixed Type - Tempered Glass (10mm Thk) - Hollow Steel Door - Fire Rated Fire Exit Steel Door - Aluminum Framed Glass Door (swing Type) - Steel Doors And Frames - Door (wood Panel) - Roll-up Door (steel) - Glazed Tiles And Trims - Unglazed Tiles - Granite Tiles - Cement Floor Finish (plain) - Floor Finishes - Cement Plaster Finish - Painting Works (masonry/concrete) - Painting Works (wood) - Painting Works (steel) - Chb Non Load Bearing (including Reinf. Steel), 150mm - Louver Blocks - Metal Steel Plates - Railing Electrical - Generator, Single Phase (stand-by) - Lighting Fixtures And Lamps Electronics And Communication - Cctv System Mechanical - Electric Elevator (501kg-1000kg) - Airconditioning - Package/split Type Approved Budget For The Contract : ₱144,750,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 3. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Organizational Outcome 1 : Ensure Safe And Reliable National Road System Asset Preservation Program Preventive Maintenance - Primary Roads Juanito R. Remulla, Sr. Rd – K0040 + 627 - K0042 + 591 Contract Id No. : 25d00041 Contract Location : Cavite Province Scope Of Works : Asphalt Overlay Of 11.754 Lane-km Carriageway In Juanito R. Remulla, Sr. Rd (cavite) Including Necessary Reblocking Of Damaged Portions Of The Concrete Pavement. Approved Budget For The Contract : ₱193,000,000.00 Net Length : 11.754 Lane-km Asphalt Overlay Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 210 C.d. Size Range : Medium B License Category : A Cost Of Bidding Documents : ₱50,000.00 4. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/improvement Of Various Infrastructures In Support Of National Security (tatag Ng Imprastraktura Para Sa Kapayapaan At Seguridad Program - Tikas) Construction Of Administration Building, Headquarters, Camp Guillermo Nakar, Lucena City, Quezon, Phase Vi Contract Id No. : 25d00047 Contract Location : Quezon Province Scope Of Works : Architectural - Installation Of Ceiling At All Floor Levels Except Third Floor (ficem Boards In Metal Frames) - Installation Of Toilet Partition - Application Of Paint Finish At Exterior Wall And Ceiling At All Floor Levels Except Third Floor - Installation Of Reflective Insulation - Sun Buffer - Site Development (concrete Pavement) Plumbing - Installation Of Water Pumping System Electrical - Installation Of Generator - Installation Of Solar Power (hybrid Set-up) - Installation Of Lighting Fixtures And Wiring Devices At All Floors Except Third Floor - Installation Of Service Entrance Post Mechanical - Installation Of Fire Pump And Jockey Pump - Installation Of Fire Protection Works At Fourth Floor - Installation Of Fire Hose Cabinets And Fire Extinguishers - Installation Of Automatic Fire Sprinkler System (afss) Electronics And Communication - Installation Of Fire Detection And Alarm System At All Floor Levels - Installation Of Network Cabling System - Installation Of Cctv System At All Floor Levels - Installation Of Door Access And Card Reader System - Installation Of Public Address System Approved Budget For The Contract : ₱96,500,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 5. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/improvement Of Various Infrastructures In Support Of National Security (tatag Ng Imprastraktura Para Sa Kapayapaan At Seguridad Program - Tikas) Construction Of Five (5) Storey Afp Quarters, Building 1, Camp Guillermo Nakar, Lucena City, Quezon, Phase Iv Contract Id No. : 25d00048 Contract Location : Quezon Province Scope Of Works : The Scope Of Works Involves Earthwork, Finishing And Other Civil Works (plumbing, Carpentry And Joinery, Finishing Hardware, Doors And Windows, Ceramic/granite Tiles, Painting Works And Railings) And Electrical And Auxiliaries. Approved Budget For The Contract : ₱102,290,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 6. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/improvement Of Various Infrastructures In Support Of National Security (tatag Ng Imprastraktura Para Sa Kapayapaan At Seguridad Program - Tikas) Construction Of Five (5) Storey Multi-purpose Building (barracks), Camp Guillermo Nakar, Lucena City, Quezon, Phase Iv Contract Id No. : 25d00049 Contract Location : Quezon Province Scope Of Works : Architectural Works - All Windows (sliding, Awning, Fixed) - All Tiles (glazed And Trims, Unglazed, Granite) - Floor Topping, Plain - Cement Floor Finish (plain) - Cement Plaster Finish - Painting Works (steel And Concrete) - Walls At Fire Pump Room (louver Blocks And Chb 150mm) Plumbing Works - Catch Basin - Plumbing Fixtures Electrical Works - All Generator, Single Phase - Network Cabling - Cctv System - Public Address System - Lighting Fixtures & Lamps Mechanical Works - Installation Of Air Conditioning Units - Installation Of Exhaust Fans - Installation Of Elevators Site Development - Side Walk - Road Way Approved Budget For The Contract : ₱85,885,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 7. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Organizational Outcome 1 : Ensure Safe And Reliable National Road System Asset Preservation Program Preventive Maintenance - Primary Roads Juanito R. Remulla, Sr. Rd - K0040 + 916 - K0041 + 232, K0041 + 262 - K0042 + 118, K0042 + 148 - K0042 + 831, K0042 + 921 - K0043 + 027 Contract Id No. : 25d00057 Contract Location : Cavite Province Scope Of Works : Asphalt Overlay Approved Budget For The Contract : ₱141,372,500.00 Net Length : Asphalt Overlay - 1,972m, 8.465 Lane Km. Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 165 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 8. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Sustainable Infrastructure Projects Alleviating Gaps (sipag) Evacuation Centers/ Quarantine Facilities/ Public Health Facilities Construction Of Multi-purpose Building (super Health Center), Mataas Na Kahoy, Batangas Contract Id No. : 25d00065 Contract Location : Batangas Province Scope Of Works : Structural - All Foundation Works - All Concrete Beams And Concrete Column At Ground Floor To Second Floor - All Slab At Second Floor, Third Floor, And Slab-on-grade - Main Stair From Ground Floor To Second Floor Architectural - Chb Masonry Walls (exterior And Interior Walls), Plastered And Painted Finish At Ground Floor To Second Floor - Ceiling Works With Paint Finish At Ground Floor To Second Floor - Tile Works (floor And Wall Tiles At Toilets) At Ground Floor To Second Floor - Doors And Windows At Ground Floor To Second Floor - Railings At Main Stair And Pwd Ramp At The Main Entrance - Waterproofing At Third Floor Slab And Toilets At Second Floor Plumbing - Installation Of Cold Water Line Pipes And Fittings - Installation Of Sewer Line Pipes And Fittings - Installation Of Storm Drain Line Pipes And Fittings - Construction Of Catch Basin, Cistern Tank, And Septic Tank - Installation Of Water Tank With Water Pumping System - Installation Of Plumbing Fixtures At Ground Floor To Second Floor Electrical And Auxiliaries - Rough-ins For Switch Boards, Panel Boxes, And Conduits - Fittings And Accessories - Wires And Wiring Devices - Panel Board With Main And Branch Breakers - Lighting Fixtures And Lamps - Grounding System Approved Budget For The Contract : ₱48,250,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱25,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. For Item Nos. 2,3,4,5,6,7 & 8 The Bac Is Conducting The Public Bidding For This Contract Pursuant To Gppb Circular 06-2019 Dated July 17, 2019 (guidelines On The Implementation Of Early Procurement Activities) In Relation To The Provisions Of The Republic Act 9184 And Its Implementing Rules And Regulations (irr). The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8am – 2pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On October 23, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents (amount Indicated On The Above Table). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Will Hold A Pre-bid Conference On October 30, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna And Through Video Conferencing Via Zoom And Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg Which Shall Be Open To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_r4a@dpwh.gov.ph For Electronic Submission On Or Before November 12, 2024 @ 10:00 A.m. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On November 12, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above Or Through Video Conferencing Via Zoom Which Shall Also Be Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg. Late Bids Shall Not Be Accepted. 10. If At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid. 11. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Cheryll C. Antonio - David Bac, Vice Chairperson Chief, Administrative Officer Administrative Division Telephone No. (02) (049) 34810220 Email Address: R4a.procurement@gmail.com Alex B. Virtudazo Bac Secretariat Head Telephone No. (02) (049) 34810215 / 34810225 Email Address: R4a.procurement@gmail.com Department Of Public Works And Highways Regional Office No. Iv-a Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna 13. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph. For Online Bid Submission At Electronicbids_r4a@dpwh.gov.ph. October 22, 2024 Approved By: Sgd Atty. Cheryll C. Antonio - David Chief, Administrative Officer Administrative Division Bac Vice Chairperson

Details: Estimated Quantity Contract To Be Delivered As And When Required For The Period Indicated At The Request Of The Department. Quantities Or Dollar Values Stated Are An Estimate Made In Good Faith And May Vary Considerably. The Province Of N.b. Reserves The Right To Purchase More Or Lesser Amounts Depending On Requirements. This Procurement Is Subject To The Provisions Of The Canadian Free Trade Agreement, The Canada-european Union Comprehensive Economic And Trade Agreement, The Agreement On Government Procurement Under The World Trade Organization And The Comprehensive And Progressive Agreement For Trans-pacific Partnership. Bidders Are Requested To Include Specifications On Product Quoted With The Bid. When Stating "unit Price" On Bid Submissions, Vendors Are Required To Quote Pricings No More Than Four (4) Digit Positions After The Decimal Point. More Than 4 Digit Positions After The Decimal Point Will Be Rounded-off To The Fourth Position. *shipping Charges Must Be Included In The Unit Price.* When Samples Are Requested By The Province, The Samples Will Remain The Property Of The Province Of N.b. For A One (1) Year Period. If Vendors Want The Sample Returned After The One (1) Year Period, This Must Be Requested In Writing On The Packing Slip, Attached To Each Individual Sample, When Submitted. On This Request The Vendor Must State The Method Of Return That Will Be Charged To Their Company. New Brunswick Manufacturer Preference By Stating Yes In The Input Box, I Confirm That I Am A Manufacturer Of Goods With A Place Of Business In New Brunswick As Defined Below And Am Therefore Eligible To Be Considered For The Nb Manufacturer Preference As Defined In This Solicitation Document. If The Input Box Is Left Incomplete The Bid May Be Ineligible For The New Brunswick Manufacturer Preference. Place Of Business Means An Establishment Where A Manufacturer Regularly Conducts Its Activities On A Permanent Basis, Is Clearly Identified By Name And Is Accessible During Normal Business Hours. New Brunswick Vendor Preference By Stating Yes In The Input Box, I Confirm That I Am A Vendor Of Goods Or Services With A Place Of Business In New Brunswick As Defined Below And Am Therefore Eligible To Be Considered For The Nb Vendor Preference As Defined In This Solicitation Document. If The Input Box Is Left Incomplete The Bid May Be Ineligible For The New Brunswick Vendor Preference. Place Of Business Means An Establishment Where A Vendor Regularly Conducts Its Activities On A Permanent Basis, Is Clearly Identified By Name And Is Accessible During Normal Business Hours. Fire Extinguishing Agent, Monoammonium Phosphate, Dry Chemical, Multipurpose, Can/ulc-s514-m88 *****amendment #1***** Please Note That This Invitation To Tender Has Been Amended To Correct The Closing Date To Be December 9,2024. *** Scope This Invitation To Tender Consists Of The Supply And Delivery Of Wildland Fire Fighting Foam On Behalf Of The Department Of Natural Resources And Energy Development. This Estimated Quantity Contract Will Be Effective From The Date Of Award To October 31st, 2028, Plus One (1) Additional Mutually Agreed Upon 2 (two) Year Renewal Option. Option Year Pricing Gnb Reserves The Right To Negotiate Lower Pricing With Vendors In The Option Year(s). Gnb May Consider Price Increases In The Option Year If Deemed To Be Reasonable And Based On Market Conditions, Not To Exceed The Tendered Price Plus Any Published Increase In The New Brunswick Consumer Price Index (cpi). If A Mutually Agreed Upon Price Cannot Be Reached Gnb Reserves The Right To Re-tender, Re-award Or Delete The Item(s) In Question. Successful Vendor Will Be Required To Apply In Writing Thirty (30) Days Prior To Any Price Adjustment. Only One Price Adjustment Will Be Permitted Per Year. Specification Requirements Product Must Meet International Specifications For Fire Suppressant Foam For Wildland Fires, Aircraft, Or Ground Application (usda Fs Specifications 5100-307). See Attached Document. Product Must Be Fully Qualified For Use And Be Included On The Latest Usda Forest Service Qualified Products List. Product Must Be Approved For Use In Single Engine Air Tankers (seats), Helicopter Bucketing And Ground Engine. Total Water Content Must Be Less Than 50% By Weight. Product Must Be Proven To Have A Superior Performance In Cold Water. Pour Point Temperature Of Less Than Or Equal To 15 Degrees Fahrenheit. Product To Be Packaged In 208 Litre Drums Or 1000 Litre Tote (as Requested) An Estimated 60-120 Drums (or Equivalent 1000 Litre Totes) May Be Purchased. Note: These Are Estimates Only And There Is No Guarantee Of Order Quantity Throughout The Duration Of The Contract. Submittals Bidder(s) Must Provide A Certified Analysis From An Independent Laboratory Showing Water Content Using Astm E20: Karl Fischer Titration Test With Their Bid Submission. Bidder(s) Should Submit Product Specifications And Any Msds Sheets Associated With The Product With Their Bid Submission. Contract Award Criteria This Tender Will Be Awarded Based On The Overall Lowest Compliant Bid Which Meets The Required Specifications And Consideration Of Other Cost Savings Incentives, Which Ever Provides The Best Overall Value To The Province Of New Brunswick. (best Overall Value Will Be Determined At The Sole Discretion Of Gnb And All Decisions Are Final.) A Foam Sample May Be Requested Prior To Award Of Tender (samples Are Not Required At The Time Of Bid Submission). The Bidder Will Be Contacted Prior To Award If A Sample Is Required. How To Submit Pricing Vendors Are Invited To Submit Their Unit Price-the Price For A Single Product Within The Tender Item-under The 'unit Price Including Discount' Column. Vendors Should Then Multiply Their Unit Price By The 'quantity/unit' To Calculate The 'extended Price'. The 'unit Price Including Discount' And 'extended Price' Should Not Include Taxes. When Stating The 'unit Price,' Vendors Must Include Delivery To The Shipping Address Detailed Above. The Bid Price Must Include Any Additional Costs And/or Charges That May Apply. All Prices Must Be Fob Final Destination, Freight Prepaid. Do Not Include Any Sales/hst Taxes In The Prices Quoted In The Tender Document. Delivery Date And Price Vendor(s) Are To Deliver The Good To The Address Detailed Above On An As And When Required Basis, Upon Receipt Of An Official Release Against This Contract. Vendor Questions All Inquiries Should Be Received Seven (7) Calendar Days Prior To The Closing Date; Any Inquiries Received Less Than Seven (7) Calendar Days Prior To The Closing Date Cannot Be Guaranteed A Response. Please Reference The Tender Number And Closing Date Within Your Communications To Ensure A Prompt And Accurate Reply. Requirements Vendors Are Required To Sign And Date Their Bid In The Spave Provided Below. This Is A Tender Notice Only. In Order To Submit A Bid, You Must Obtain Official Tender Documents From The New Brunswick Opportunities Network, Another Authorized Tendering Service Or As Indicated In The Tender Notice. Solicitation Documents Will Be Provided In Either Of The Province Of New Brunswick's Two Official Languages; English Or French Upon Request. Instructions For Bid Submission 1. Effective April 15, 2020, Service New Brunswick Is No Longer Accepting Paper Bids, And The Central Tendering Branch Is Closed To The Public. Public Tender Openings Are No Longer Taking Place; However, Results Continue To Be Posted On Nbon. 2. Bids Will Only Be Accepted By Electronic Transmission As Follows: A. By E-bidding Through Nbon (when E-bidding Is Possible); Or B. By Fax To: (506) 444-4200 (fax To Dedicated Mailbox). Note: Proposals In Response To A Request For Proposals (rfp) Will Not Be Accepted By Fax; Or C. By Email To Nbbids@snb.ca Or Soumissionsnb@snb.ca (do Not Submit Bids To Any Other Email). Click Here Instructions For Bid Submission For Important Instructions On How To Submit Bids By Email. D. Please Refrain From Submitting Your Bid Through Multiple Electronic Channels To Avoid Duplicate Bids. 3. All Bids Must Be Properly Signed By An Authorized Person. A. For Bids Submitted By Email Or Fax: Typed Signatures (in Any Font) That Are Not On The Bid Itself (i.e. In The Body Of The Email Or On The Fax Cover Sheet) Will Not Be Accepted. 4. All Bids Must Be Legible, Properly Completed And Contain The Proper Solicitation Number. 5. The Proponent Is Solely Responsible For Ensuring That The Bid Submission In Its Entirety, Including All Attachments, Is Received Before Closing Date And Time As Indicated On The Solicitation Documents. A. The Proponent Bears All Risk Associated With Delivering Its Bid By Electronic Submission, Including But Not Limited To Delays In Transmission Between The Proponent's Computer And The Province's Electronic Mail System, Nbon Or Fax. B. The Date And Time Of Official Receipt Of The Bid Will Be The Time Of Receipt Recorded In The Nbon System (for E-bids) Or The Time Of Receipt In The Province's Electronic Mail System (for Fax And Email Bid Submissions). 6. All Bids Must Be Stated In Canadian Funds. Sales Taxes Should Not Be Included In The Unit, Extended Or Total Prices. 7. All Tenders Must Be F.o.b. Destination, Freight Prepaid. 8. This Invitation Is Being Conducted Under The Provisions Of The Procurement Act And Regulation 2014-93 As Of The Date Of The Issuance Of The Invitation. Direct Deposit The Province Of New Brunswick Is Now Using Direct Deposit As The Standard Method Of Issuing Payments. Suppliers Are Required To Provide Bank Account Information And An Email Address For The Notice Of Remittance. Please Send The Completed Direct Deposit Form To Service New Brunswick (e-mail Address And Mailing Address Are Indicated On The Form). Please Click On The Link Below To View The Direct Deposit Form. Https://www2.snb.ca/content/dam/snb/procurement/directdepositvirementdirect.pdf A Bidder Must Obtain Official Solicitation Documents From A Distribution Service, Authorized By The Minister Of Service New Brunswick, In Order To Submit A Bid. The Current Authorized Distribution Services Are The New Brunswick Opportunities Network (nbon) (operated By Service New Brunswick, Province Of Nb), Bidsalert (operated By Tendering Publications Ltd.) And Merx (operated By Mediagrif Interactive Technologies). Bids Should Be Submitted On The Official Bid Documents Obtained From These Authorized Distribution Services. The Province Of New Brunswick Reserves The Right To Negotiate Pricing, Value Added And Other Savings Opportunities With The Successful Proponent At Time Of Award And Throughout The Contract. All Suppliers Engaged To Deliver Services On Behalf Of The Government Of New Brunswick Must Ensure Compliance With The Official Languages Act In The Delivery Of Those Services. For More Information, Please Refer To The Official Languages Act. The Atlantic Provinces Standard Terms & Conditions For Goods And Services Apply To This Procurement And Are Considered To Be Incorporated Into This Document. By Submitting A Bid, You Agree And Accept These Terms And Conditions. Current "atlantic Provinces Standard Terms And Conditions" Are Available On The New Brunswick Opportunities Network, The Council Of Atlantic Premiers' Website Or From An Authorized Service Provider. Covid-19 Restrictions For Workers Entering New Brunswick All Suppliers And Workers Entering The Province Of New Brunswick For Work Purposes Must Comply With The Requirements Established By Worksafe Nb And Public Health, Including Isolation Requirements Where Applicable. Click Here For More Information On These Requirements. Questions: Written Questions Relating To This Opportunity May Be Submitted To The Address Provided Below Via Email By Clicking On Questions. Please Be Sure To Include The Solicitation/tender Number In The Subject Line. Email Address: Bidquestionssoumissions@snb.ca Note: This Email Account Is Strictly For The Receipt Of Questions On Open Opportunities. This Email Is Not For The Submission Of Bids. Covid-19 Supplier Vaccination Policy Suppliers Must Comply With All Gnb Health And Safety Policies And Standards Including, Without Limitation, All Health And Safety Policies And Standards Related To Covid-19, As Applicable. Go To Www.gnb.ca/nbon To View The Full Policy And Faqs. Under Canadian Law (and International Agreements), Your Bid Must Arrive Separately And Independently, Without Conspiracy, Collusion Or Fraud; See Http://www.competitionbureau.gc.ca/eic/site/cb-bc.nsf/eng/home For Further Information. Pay Equity Does Your Organization Have 50 Or More Employees? The Government Of New Brunswick Is Committed To Encouraging And Incentivizing The Adoption Of Pay Equity By Employers Doing Business With Government. Prior To The Award Of Procurements For Goods And Services Valued Over $1,000,000, Suppliers, With Fifty (50) Or More Employees Will Be Required To Complete The Pay Equity Learning Module Developed By The Women's Equality Branch. Suppliers Should Provide A Copy Of Their Certificate Of Completion With Their Bid Submission. To Complete The Online Module And Obtain Your Certificate, Please Visit Www.gnb.ca/payequity. For Questions, Please Contact The Pay Equity Bureau Toll Free: (877) 253-0266 Or By Email: Peb-bes@gnb.ca. All Discounts Quoted Will Be Considered To Be Without Limitations. Award Of Contracts: No Contract Shall Be Awarded And No Payment Shall Be Made To A Vendor Unless Authorized By The Minister Or His Delegates. The Minister May Make An Award To The Preferred Vendor Conditional On The Negotiation And Acceptance Of A Detailed Contract Between The Province And The Vendor. In Such Cases, Should The Detailed Contract Negotiations Not Be Completed In A Reasonable Period Of Time, The Province Reserves The Right To Discontinue Negotiations With The Vendor And Subsequently Enter Into Negotiations With The Second Preferred Vendor. No Right Or Duty, In Whole Or In Part, Of The Vendor Under A Contract Issued May Be Assigned Or Delegated Without The Prior Consent Of The Strategic Procurement Branch. Unless Indicated Otherwise In This Tender Notice Or Attached Documents, All Prices Must Be Extended And Totalled. All Suppliers Engaged To Deliver Goods Or Services To The Government Of New Brunswick Must Ensure Compliance With The Designated Materials Regulation In The Provision Or Delivery Of Those Goods Obligated Under That Regulation. Please Refer To Recycle Nb's Website And The Designated Materials Regulation For Specifics. Payment Of Invoices Payment Of Invoices Is The Responsibility Of The Department Or Organization To Whom The Goods Are Shipped Or Services Are Supplied. Where The Estimated Value Of The Goods Or Services To Be Procured Is Below The Lowest Applicable Threshold Value Of Any Relevant Trade Agreement, Service New Brunswick Reserves The Right To Give Preferential Treatment To A Prospective Supplier From New Brunswick. Should This Right Be Exercised, The Following Order Of Priority Will Apply: A) Firstly, New Brunswick Manufacturers If The Goods To Be Procured Are Manufactured In New Brunswick; And B) Secondly, New Brunswick Vendors. When Bid Submissions Are Evaluated On Price: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Lowest-priced Acceptable Bid And The Bid Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Be Limited To 10%. When The Lowest-priced Acceptable Bid Before Preferential Treatment Is Applied Is A New Brunswick Vendor, The Price Differential Under Which A Nb Manufacturer Preference Will Be Applied Will Be Limited To 5%. - The Preferential Treatment Will Be Applied By Making The Award To The Nb Supplier. When Bid Submissions Are Evaluated On A Point System: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Pricing Component Of The Highest Scoring Acceptable Bid Submission And The Pricing Component Of The Bid(s) Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Be Limited To 10%. When The Highest Scoring Acceptable Bid Submission Before Preferential Treatment Is Applied Is A New Brunswick Vendor, The Price Differential Under Which A Nb Manufacturer Preference Will Be Applied Will Be Limited To 5%. - The Preferential Treatment Will Be Applied By Allotting A Maximum Of An Additional 5% Of The Total Possible Points To New Brunswick Manufacturers' Total Scores And 4% To Nb Vendors' Total Scores. If No Bid From A New Brunswick Manufacturer Has Been Retained For Preferential Treatment, New Brunswick Vendors May Receive A Maximum Of An Additional 5% Of The Total Possible Points Rather Than 4%. The Decision To Apply A Preference Will Be At The Sole Discretion Of Service New Brunswick. To Be Eligible, Suppliers Must Meet The Definition Of Nb Supplier As Identified By The Regulation Under The Procurement Act. Nb Manufacturers Should Indicate In Their Bid That They Are A Nb Manufacturer To Be Considered For The Nb Manufacturer Preference. Where Permissible Under The Applicable Trade Agreements And The Regulation Under The Procurement Act, Service New Brunswick Reserves The Right To Give Preferential Treatment To A Prospective Supplier From New Brunswick. Should This Right Be Exercised, The Following Order Of Priority Will Apply: A) Firstly, New Brunswick Manufacturers If The Goods To Be Procured Are Manufactured In New Brunswick; And B) Secondly, New Brunswick Vendors. When Bid Submissions Are Evaluated On Price: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Lowest-priced Acceptable Bid And The Bid Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Vary Between 2.5% And 10% Depending On The Total Estimated Value Of The Procurement, In Accordance With The Ranges Set Out In The Regulation Under The Procurement Act. - The Preferential Treatment Will Be Applied By Making The Award To The Nb Supplier. When Bid Submissions Are Evaluated On A Point System: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Pricing Component Of The Highest Scoring Acceptable Bid Submission And The Pricing Component Of The Bid(s) Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Vary Between 2.5% And 10% Depending On The Total Estimated Value Of The Procurement, In Accordance With The Ranges Set Out In The Regulation Under The Procurement Act. - The Preferential Treatment Will Be Applied By Allotting A Maximum Of An Additional 5% Of The Total Possible Points To New Brunswick Manufacturers' Total Scores And 4% To Nb Vendors' Total Scores. If No Bid From A New Brunswick Manufacturer Has Been Retained For Preferential Treatment, New Brunswick Vendors May Receive A Maximum Of An Additional 5% Of The Total Possible Points Rather Than 4%. The Decision To Apply A Preference Will Be At The Sole Discretion Of Service New Brunswick. To Be Eligible, Suppliers Must Meet The Definition Of Nb Supplier As Identified By The Regulation Under The Procurement Act. Nb Manufacturers Should Indicate In Their Bid That They Are A Nb Manufacturer To Be Considered For The Nb Manufacturer Preference.

Details: Description Invitation To Bid For Procurement Of Security Services 2025 Project Identification No.: Pb-albaygoods-24-21 1. The Department Of Education, Schools Division Office Of Albay, Through The General Appropriations Act Of 2024 Intends To Apply The Sum Of Philippine Pesos One Million Two Hundred Thousand (php 1,200,000.00) Only Being The Abc As Payment For The Above-mentioned Contract. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Quantity Unit Of Measure Item Description Estimated Unit Cost (php) Estimated Cost (php) Procurement Of Security Services 2025 3 Guard Day Shift Security Guards From January – December 2025 (monday To Sunday) 17,550.00 631,800.00 2 Guard Day Shift Security Guards From January – December 2025 (saturday & Sunday) 4,160.00 99,840.00 2 Guard Night Shift Security Guards From January – December 2025 (monday To Sunday) 19,515.00 463,360.00 Total 1,200,000.00 Revised Security Plan Of The Schools Division Of Albay I. Rationale Article Ii, Section 18 Of The Constitution Of The Republic Of The Philippines States That, "the State Affirms Labor As A Primary Social Economic Force. It Shall Protect The Rights Of Workers And Promote Their Welfare." Chapter Ii, Article 168 Of The Labor Code Of The Philippines (as Amended), Also States, "the Secretary Of Labor And Employment Shall, By Appropriate Orders, Set And Enforce Mandatory Occupational Safety And Health Standards To Eliminate Or Reduce Occupational Safety And Health Hazards In All Workplaces Xxx." Section 2 Of Presidential Decree No. 1445 Otherwise Known As The State Auditing Code Of The Philippines States That "all Resources Of The Government Shall Be Managed, Expended Or Utilized In Accordance With Law, Rules And Regulations & Safeguarded Against Loss Or Wastage Xxx". The Responsibility To Take Care Of Such Policy Rests Directly With The Chief Or The Head Of The Government Agency Concerned. As A Government Workplace, It Is Therefore Inherent To Schools Division Of Albay To Have A Security Plan To Protect Not Just Its Employees And Properties But Its Clientele And Visitors As Well, Against Assault, Arson, Mischief, Pilferage, Robbery, Sabotage, Terrorism And Theft. It Should Also Provide Safety Measures And Response To Prevent And Minimize Loss Or Damage From Calamities And Civil Disturbance. Ii. Objectives ܀ To Undertake Security Measures For Total Protection Of The Schools Division Of Albay Personnel Which Might Endanger Their Lives And The Agency's Properties As Well ܀ To Undertake Security Operations Which Includes, But Not Limited To, Traffic/crowd Control And Emergency Response ܀to Enforce Sdo's Existing Rules & Regulations On The Security Of Personnel ܀ To Undertake Measures To Prevent Unauthorized Persons From Entering The Office Building ܀ To Perform Such Other Functions As May Deemed Necessary By The Schools Division Of Albay Iii. Scope This Plan Shall Be Implemented In The Schools Division Office, Ligñon Hill, Bogtong, Legazpi City, Albay. Iv. Definition Of Terms For Purposes Of This Plan The Following Terms Are Defined As Follows (reference: Dole Department Order No. 150-16, S. 2016): Principal - Refers To Any Individual, Company, Cooperative, Or Establishment, Including Government Agencies And Government - Owned And Controlled - Corporations, Who Or Which Puts Out Or Farms Out A Security And/or Detective Job, Service, Or Work To A Private Security Service Contractor. Security Guard - Refers To Any Person Who Offers To Renders Personal Service To Watch Or Secure A Residence, Business Establishment, Building, Compound, Any Other Area Or Property; Or Inspects, Monitors, Or Performs Body Checks Or Searches Of Individuals Or Baggage And Other Forms Of Security Inspection. Security Service Contractor (ssc) - Is Synonymous With Private Security Agency (psa) Which Refers To Any Person, Association, Partnership, Firm Or Private Corporation Engaged In Contracting, Recruitment, Training, Furnishing, Or Posting Of Security Guard And Other Private Security Personnel To Individuals, Corporations, Offices And Organizations, Whether Private Or Public, For Their Security Needs As The Philippine National Police (pnp) May Approve. Service Agreement – Refers To Contract Between The Principal And The Ssc/psa Containing The Terms And Conditions Governing The Performance Or Completion Of Security Service, Job, Or Work Being Farmed Out For A Definite Or Predetermined Period. Duty Detail Order – Refers To A Written Order/schedule/assignment Issued To A Security Guard And Other Private Security Personnel By A Superior Officer, Usually The Private Security Agency Or Branch Manage Or Operation’s Officer, For The Performance Of Security And/or Detective Service Duty/ies. V. Target Implementation A. Pre-deployment In Coordination With The Sdo-albay Management, Otherwise Known As The Principal, And The Outgoing Security Service Contractor (ssc), The Incoming Ssc Shall Organize An Advance Team Who Will Conduct A Pre-deployment Orientation Onsite. At The Expense Of The Winning Bidder, The Said Advance Team Will Render Duties Side By Side With The Personnel Of The Outgoing Security Provider At Least Two Days Before The Formal Assumption. B. Deployment A Minimum Of Eight (8) Hours Before Expiration Of The Security Contract Of The Outgoing Security Contractor, The Incoming Security Force Listed In The Manning Detail Order Must Attend A Briefing To Be Conducted By The Office Of The Administrative Officer V (general Services). Thereafter, They Shall Be Posted Alongside With The Outgoing Security Guards To Get Acquainted With The New Assignments. Authorized Representative Of The Outgoing Security Contractor Shall Be Required To Make Proper Endorsement Of Accountability To The Authorized Representative Of The Incoming Security Contractor In The Presence Of The Authorized Sdo-albay Representative Prior To Their Departure. A List Of Incoming Security Personnel Who Will Take-over Duties At The Sdo-albay Together With Their Individual Bio-data And Licenses And Mandatory Clearances Shall Be Submitted Five (5) Days Earlier To The Administrative Officer V (general Services) For Scrutiny, Including Training Certificate Which Show Proof That They Have Undergone Required Training For Security Guards And Must Have The Knowledge Of Pertinent Rules And Regulations. Guards To Be Posted Should All Be New, And No Retention Of Old Security Guards, Unless The Head Of The Agency Approves. During The Actual Takeover Of Duties At The Sdo-albay, The Security Guards Shall Be Accompanied And Closely Supervised By A Senior Official Of The Incoming Security Contractor (agency). All Incoming Security Personnel Who Will Assume To Take Over Duties Shall Report In Proper Uniform With Head Gears And Paraphernalia, Prescribed Equipment (as Prescribed In The Technical Proposal) And All Necessary Documents Such As Duty Detail Order, Guard’s License, Copy Of Firearm License, And Individual Company Id. Weekly Submission Of Incident Reports To The Office Of The Administrative Officer V (general Services) For Record Purposes, But Unusual/untoward Incidents Must Be Reported Immediately After Their Occurrence. C. Logistics Security Contractor Will Provide The Security Force With The Minimum Equipment Required Under The Bidding Rules Such As Firearms, Licensed Radio Communications Equipment And Other Equipment Deemed Necessary In The Effective Implementation Of Security Policies, Rules & Regulations Of Department Of Education, Schools Division Office Of Albay. Daily Time Record And Other Logistical Supplies Shall Also Be Provided By The Security Contractor. D. Administration 1. Organizational Structure Headquarters Security Agency/security Service Contractor (ssc) Security Coordinator 1st Shift 2nd Shift 3rd Shift Guard Guard Guard 2. Minimum Requirements A. Security Manpower A. Minimum Qualifications Of Security Officer/s And Security Guards A.1 The Security Guards Shall Have The Following Minimum Qualifications: A.1.i) Must Be At Least 25 Years Old. A.1.ii) At Least High School Graduate, As Indicated In The Private Security License Card A.1.iii) Has Undergone Pre-licensing Training Program For New Recruits, Or Refresher Training Program To Include Among Others, First-aid Administration, Fire-fighting Techniques, And For Security Guards With More Than One Year Experience, As Indicated In The Private Security License Card. A.1.iv) Physically And Mentally Fit, As Indicated In The Private Security License Card. A.1.v) Of Good Moral Character And Reputation Supported With Nbi Clearance. A.1.vi) Knows How To Deal Pleasantly And Courteously With Personnel, Clients And The General Public, Supported With A Certification From The Security Agency. A.1.vii) Proof Of Neuro-psychiatric And Drug Test Clearance From Any Accredited Drug Testing Laboratory A.2 Valid Private Security License Card And Nbi Clearance During The Opening Of Bids And Contract Signing And Implementation. B. Security Equipment Supplies/materials/equipment Unit/piece/set Required Operational, Functional And Well-maintained Firearms - 9mm Pistol With Valid License In The Name Of The Security Agency & One (1) Magazine. 2 Handheld Radio With Valid Ntc License 2 Pre-numbered Logbook 15 Flashlights 2 Big Umbrella 1 First Aid Kit 1 3. Guard Assignments/tour Of Duty No. Security Station Tour Of Duty No. Of Hours Days Of Duties Shift 1 Gate Guard (entrance) 0600h - 1400h 8 Monday - Sunday Gate Guard (exit/roving) 0600h - 1400h 8 Monday - Sunday Shift 2 Gate Guard (entrance) 1400h – 2200h 8 Monday - Sunday Gate Guard (exit/roving) 1400h – 2200h 8 Monday - Sunday Shift 3 Gate Guard (entrance) 2200h – 0600h 8 Monday - Sunday Gate Guard (exit/roving) 2200h – 0600h 8 Monday - Sunday 4. Operating Policies & Procedures 4.a. Duties & Responsibilities Of The Security Agency And Security Guards 4.a.) Security Service Contractor (ssc)/security Agency Shall: 1. Provide The Principal (sdo-albay) With Qualified And Trained Security Guards And Security Officers To, At All Times, Maintain Security And Safeguard The Building, Offices And Properties Within The Premises Of The Sdo, As Well As To Provide Protection To Its Officials, Employees, Visitors, Guests And Transacting Public; 2. Ensure, On Its Account, All Equipment Necessary For The Performance Of Its Obligations Under The Contract, Including The Items Stated Under D.2.b (minimum Requirements For Security Equipment); 3. Be Liable And Answerable To The Principal, For Damages Or Losses Within Its Premises And For Such Actions Which Directly Prejudice The Integrity, Efficiency, And Effectiveness Of The Principal, Its Operations And Its Officials And Employees Caused By Or Due To The Negligence And/or Misdemeanor Of The Ssc Personnel, But Not For Any Loss Or Damage Or Harm Due To Any Fortuitous Event, Force Majeure Or Causes Beyond The Control Of Ssc Personnel; 4. Ensure The Adequacy Of The Compensation And Benefits Of Its Guards And Submit To The Principal Its Monthly Or Quarterly Remittances On Various Contributions In Support To The Claims For Payout; 5. Assign One Head Security Guard Or Security Coordinator Who Shall Exercise The Tasks As Enumerated Under 4.a.1; 6. Provide The Principal With The 201 Files Of The Security Guards; 7. Retain And Exercise The Sole, Exclusive And Absolute Right To Suspend, Lay-off, Terminate And/or Impose Disciplinary Measures, Direct And Control Its Personnel And To Assign, Rotate And Re-assign Security Guards, Subject To The Approval Of A Duty Detail/schedule By The Office Of The Superintendent, Provided, That No Security Guard Shall Be Removed, Changed Or Transferred To Any Place Of Assignment Without Sufficient Notice To The Principal. The Schools Division Superintendent Shall Have The Right To Select, Change Or Refuse Any Security Guard Assigned. Duty Detail Order Of Every Assigned Security Guard Shall Contain, Among Others, The Following Information (section 5,2 Dole Department Order No. 150-16, S. 2016): 1. Name, Address, Active Telephone/contact Number & Email Address Of The Agency; 2. Issue Serial Number And Date Of The Duty Detail Order; 3. Complete Name And Designation Of Grantee; 4. Purpose; 5. Inclusive Dates Of Retail; 6. Firearms Description & License Number; 7. Authorized Uniform To Be Used; 8. Other Specific Instructions Or Remarks; And 9. Signature And Designation Of The Issuing Officer. 8. Not Withdraw Or Replace Any Security Guard Involved In Any Violation Of The Sdo’s Policies, Rules And Regulations Or Involved In Any Administrative Case Against Sdo Officials And Employees Until After Proper Investigation And Resolution Of The Case Have Been Made By The Sdo And Other Authorities Concerned. 9. Act Upon The Referred Concerns And Complaints Within 24-hours To The Satisfaction Of The Principal; 10. Submit Directly To The Office Of The Superintendent Such Weekly/monthly Incident Reports And Other Reports As May Be Required From Time To Time By The Principal. 11. As Part Of Its Bid, The Security Agency, Shall Submit An Undertaking To Pay Their Security Guards The Prescribed Benefits (section 7.2 Dole Department No. 150-16, S. 2016). 4.a.1) Officer-in-charge/security Coordinator 1. Act As Liaison With Deped, Sdo-albay And The Security Agency. 2. Has Over-all Responsibility Of The Members Of The Security Force. 3. Provide Guidance & Assistance To The Members Of The Security Force Assigned At Sdo-albay. 4. Monitor The Daily Operations Of The Security Force At Sdo-albay Installations. 5. Provide Leadership And Direction For The Security Guards. 6. Responsible To The Sdo-albay Management For The Implementation Of All Rules Regulations Relevant To Security Matters. 7. Monitor The Performance And Efficiency Of The Guards And Recommend The Relief Of Misfits. 8. Prepare And Submit Special Report/s Of Unusual Incidents, As Well As Guard Detail Order And Monthly Security Report And Conditions Of Secured Properties. 9. Advise Sdo-albay Officials Concerned Regarding Measures To Be Undertaken To Improve The Security Of The Building Premises. 10. Conduct Troop Information And Education To All Guards On A Regular Basis Or As The Need Arises. 11. Perform Other Duties As Sdo-albay And/or The Security Agency May Direct. 4.a.2) Entrance/exit Gate/parking Guards 1. Screen Visitors With Utmost Courtesy And Guide Them To The Office They Desire To Transact Business. Also Notify By Two-way Radio The Official Or Employee To Be Visited. 2. Issue Visitor’s Pass In Exchange Of A Current And Valid Government Issued Identification Card. 3. Advise All Visitors And Employees To Pin Their Ids While Inside The Building. 4. Inspect Thoroughly (metal Detector) All Bags, Packages And Attaché Case Hand-carried By Visitors. 5. Maintain A Logbook For Visitors And A Separate Logbook For Office Personnel. 6. Control Flow Or Traffic And Direct Drivers To Park Vehicles Properly In Designated Parking Areas. 7. Safeguard And Protect Parked Vehicles From Pilferage Of Accessories And Other Attachments. 8. Not Allow Sdo Vehicles To Leave The Compound Without Necessary Trip Ticket Duly Signed By The Authorized Signatory. 9. Maintain The Logbook On The Arrival And Departure Of Sdo Vehicles. 10. Submit To The Management, Thru The Office Of The Administrative Officer V Or The Supply And Property Section A Monthly Report On The Movement Of The Service Vehicles. 11. Control The Parking Of Vehicles Of Visitors To The Designated Parking Area. Employee’s Vehicles Shall Be Allowed Entry And To Park In The Designated Area For Privately Owned Vehicles. When Departing However, Their Vehicles Shall Be Subjected To Inspection. 12. Enforce The Established System Control Over The Removal Of Property And Materials From The Compound, As May Be Applicable. 13. Respond To Suspicious Activities Of Lawless Elements. 14. Enforce All Existing Sdo Security Rules And Regulations (to Be Discussed By The Office Of The Administrative Officer V (general Services). 15. Submit Reports Of Any Unusual Incidents. 16. Perform Other Duties As The Sdo And/or Security Agency May Direct. 4.a.3) Roving Guards 1. All Roving Guards Must Politely Guide, Check And Observe Situations Of Visitors/within Area Of Responsibility. 2. Guide Visitors To Their Office Destination. 3. Check And Prevent Unauthorized Persons From Loitering In The Corridors Or Entering Offices Without Official Business Or Transactions. 4. Prohibit Vendors Or Solicitors From Entering The Office During Office Hours. 5. Observe And Patrol Designated Perimeters, Areas, Structures And Activities Of Security Interest. 6. Apprehend Person Attempting Or Gaining Unauthorized Access To Restricted Areas And Those Committing Unlawful Acts. 7. Check Depositories, Rooms Or Buildings Of Security Interest Any Item, In Addition To The Normal Working Hours To Determine That They Are Properly Locked And Are Otherwise In Order. 8. Check All Office Equipment And Appliance Before Or After Office Hours. See To It That These Office Equipment And Appliances Are In Proper Places, And Then, Close/lock All Offices After Determining That Everything Is Secured. 9. Conduct Inventory Of Movable Equipment In The Office. 10. See To It That All Lights Are Switched Off And All Electrically Operated Equipment And Appliances Are Unplugged When Occupants Of An Office Are All Gone. 11. Impose All Existing Sdo Security Rules & Regulations. 12. Be Familiar With The Location Of The Fire-alarm System And Fire-fighting Equipment. Be Alert At All Times. 17. Submit Reports Of Any Unusual Incidents. 1. Perform Other Duties As The Sdo And/or Security Agency May Direct. 4.b. Compound/building Security Access System 4.b.1) Entry Of Packages 4.b.1.i) For Hand-carried Items: The Guard Shall:  Monitor By Using Metal Detector And Frisk Suspicious Looking People Of Deadly Weapon, Explosives, Contraband Items, Prohibited Drugs And Other Harmful Substances.  Inspect All Bags And Parcels To Ensure That No Deadly Paraphernalia Brought Inside The Compound.  Inspect The Surroundings For Suspicious Objects Which Do Not Belong To The Ground.  Require Individuals Possessing Firearms To Leave/deposit The Firearm To The Security Guard After Issuing A Deposit Slip.  Turn Over To The Nearest Police Station Individuals Who Are Found Possessing Deadly Or Other Harmful Materials And/properties.  Call The Recipient Of The Delivery Boxes To Confirm Whether Or Not He/she Is Expecting Delivery Boxes/properties. 4.b.1.ii) For Vehicles Of Visitors, Clients And Employees: The Guard Shall:  Maintain A Record Of Departure And Arrival Of Vehicle Within Client Premises. The Record Will Indicate The Plate Number, Time-in And Out, The Name Of The Driver And Company.  All Vehicles Entering The Compound Will Be Subject To Thorough Inspections. The Guard Will Require The Vehicle Owners To Open Its Compartment For Inspection, And If There Are Illegal Contraband Items On Board, Initiate Arrest.  Direct The Inward And Outward Flow Of Traffic And Apply Existing Parking Regulations.  Visitors Who Refuse To Subject His Vehicle For Inspection Shall Be Denied Entry.  The Guard At The Entrance Gate Must Be Equipped With The Under-chassis Mirror For Inspection Under The Vehicle. 4.b.2) Record Of Entry Of Packages The Guard Shall:  Maintain A Record Of Visitor’s Logbook Within Its Post. The Logbook Will Indicate The Name Of The Visitors, Company/residence Address, Purpose Of Visit, Signature And Time In/out.  Verified With The Recipient Of The Delivered Boxes If He Is Expecting Any Delivery. 4.b.3) Safekeeping Of The Deadly Weapon  Individuals Found In Possession Of Deadly Weapons Will Be Subject For Investigation. If He Is Authorized By Law, The Owner Will Deposit The Firearms/weapons To The Guard And The Duty Guard Will Issue A Deposit Slip Indicating The Name Of The Owner, Model, Type, Caliber Of Firearm, Date And Time In/out. When The Owner Needs To Leave The Compound He/she Must Surrender The Deposit Slip To The Guard To Retrieve His Weapons/firearms.  Individual In Possession Of Deadly Weapons Who Are Found Unauthorized By Law Will Be Apprehended And Turned Over To The Nearest Police Station. 4.b.4) Exit Of Packages/equipment Hand-carried Deped, Sdo-albay Property Brought Out Of The Compound Shall Be Accompanied With Property Pass Slip Signed By The Sdo Property Officer.  Guard Shall Deny The Pull-out Of The Sdo Property That Is Not Covered By Pass Slip.  Guards Must Inspect And Ensure That The Property Being Brought Out Are Indicted In The Property Slip Or Gate Pass. They Will Record The Name/kind Of The Equipment Including The Serial Number, Person Responsible, Time And Date. Sealed Boxes Brought Outside The Building/compound Will Be Required For Inspection. 4.b.5) Exit Of Vehicles  The Gate Guard Will Require The Owner Of Every Vehicle Intending To Leave The Area To Open Its Trunk Compartment. If Sdo Property Is Found On Board, Pass Slip Or Gate Pass Shall Be Required. 4.c. Maintain A List Of Sdo Officials Who Are Authorized To Issue Gate Pass (for Properties) 4.c.1) The Security Will Be Provided With A List Of Sdo Officials Who Are Authorized To Sign The Property Pass. The List Shall Contain The Signature Of The Authorized Individual Or His Duly Authorized Representative For Comparison With The Submitted Gate Pass Of The Concerned Party. 4.c.2) If The Gate Pass Is Found Suspicious, The Guard Shall Verify With The Signatory If He Issued Such Gate Pass To The Specified Person. 4.d Check Of Entry Of Individuals For Proper Indentification 4.d.1) Sdo Employees Shall Wear Their Ids All The Time. 4.d.2) Employees Without Id Cards Must Be Advised To Secure From The Office In-charge Of Id Printing. 4. D.3) Strict Implementation Of “no Id, No Entry” System On All Gates And Entrances Of The Sdo For Security Purposes Shall Be Imposed. 4.d.4) Visitors Are Required To Present/show Valid Identification, Such As School/office Id, Voter’s Id, Etc. Before Signing In On The Logbook. Then They Are Required To Leave Their Personal Id In Exchange Of Visitor’s Pass Which They Will Wear While Inside The Compound. 4.d.5) All Guards Shall Maintain A Logbook For Visitors. Logbook Must Be Kept In The Security Office, And Shall Be Made Available When Asked For Verification Purposes. 4.e Emergency Plan 4.e.1) Fire  In Case Of Fire, Responding Guard Shall Use Fire Extinguisher To The Base Of The Fire Until It Is Totally Covered.  If The Fire Cannot Be Stopped, The Guard Shall Immediately Initiate To Call The Nearest Fire Department.  Secure All Entrances And Exit Doors And Allow No One To Enter The Building Except Those Authorized.  All Emergency Exits Shall Be Opened.  Identify And Prepare Safe Place For Evacuation And For Temporary Use By The Victims.  Observe Any Suspicious Looking Individual Who Could Be A Possible Arson Suspect.  Record The Event Of Fire From Time To Time To Help The Investigators In Locating Possible Evidences. 4.e.2) Bomb Threats In The Case Of Bomb Threat, The Following Shall Be Done By The Security Guards Assigned:  Use Coded Messages, To Avoid Panic Among The Employees Inside The Building  Coordinate With The Local Law Enforcement Authorities, Call The Bomb Disposal Units And Inform The Fire Department.  Tighten Security Measures By Implementing Luggage Control And Body Frisking.  Evacuate People In The Nearby Places That May Not Be Reached By The Explosion.  If The Bomb Has Already Been Defused By The Experts, Search To Clear The Area Allowing Nobody To Enter The Place. 4.e.3) Typhoons  Observe The Surroundings And Detect Possible Danger From Fall Branches Or Any Object Place On A Higher Ground.  Check If The Water Reaches The Electric Outlets, If So, Inform The Administrative Officer V (general Services) For Appropriate Action.  Prepare All Emergency Lights For Possible Power Cut-off.  Monitor Radio News Report To Be Updated Of The Situation.  After The Typhoon, Request The Maintenance Personnel To Inspect All Electrical Lines Especially Plugs In The Lower Level For Possible Danger. 4.e.4) Earthquake  Guard On Post Must Immediately Assist To The Best Of His Ability To Protect And Evacuate To A Safer Area The Concerned Vips And Employees Of The Sdo.  Send Immediately Those Employees Hurt In The Course Of The Quake To The Nearest Hospital.  Search For Other Persons Left In The Building After Evacuation And Report All Damages In Properties And Injured Persons To The Drrm Coordinator..  Security Guards Shall Act As The First Responder For Basic Life Support And First Aid. 4.e.5) Theft/robbery  Upon Receiving A Compliant For Loss Of Properties, The Guard On Post Shall Prepare An Incident Report. 5. Other Services To Be Provided By The Security Agency Additional Administrative Services To Be Provided To The Sdo Free Of Charge: 1. Nightly Inspection Of The Guards On Post By The Designated Agency Inspectors. 2. Investigate Report On Security Agency Personnel Irregularities In Connection With Their Service/work, Including Investigation Of Reported Losses. This Task Is Handed By Agency Investigator Duly Accredited By The Philippine National Police (pnp) - Civil Security Group. 3. Other Security Gadgets/equipment Which The Sdo May Require To Meet Possible Future Needs. 2. The Department Of Education, Schools Division Office Of Albay Now Invites Bids For The Above-cited Procurement Opportunity. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders In The Amount Of Php 5,000.00 Pursuant To The Latest Guidelines Issued By The Gppb. Delivery Of Services Is Required By January 1, 2025 To December 31, 2025. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Department Of Education, Schools Division Office Of Albay, Bids And Awards Committee Office, And Inspect The Bidding Documents At The Address Given Below From Monday To Friday During Office Hours (8:00 Am To 5:00 Pm). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13 To December 3, 2024; 9:00 Am From The Address Below And Upon Payment Of Php 5,000.00 As The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity (www.depedalbay.com) Starting November 13, 2024 Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Education, Schools Division Office Of Albay Will Hold A Pre-bid Conference On November 20, 2024; 9:00 Am At 2f Lobby, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City, Which Shall Be Opened To Qualified Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 3, 2024; 9:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Bid Opening Shall Be On December 3, 2024; 9:00 Am At 2f Lobby, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. Prospective Bidders Are Strongly Encouraged To Order Or Download The Electronic Copy Of The Bidding Documents From The Philgeps Website, For Them To Be Included In The Document Request List Of The Project. The Bidding Documents May Be Viewed Also At The Deped Sdo Albay Schools Division Office Website: Www.depedalbay.com. 9. The Department Of Education, Schools Division Office Of Albay Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Jade O. Alberto Education Program Supervisor Bac Secretariat Head-designate Office Of The Bids And Awards Committee 2nd Floor, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City Tel.no.: 052-204-8535 11. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.depedalbay.com November 12, 2024 (sgd.) Bernie C. Despabiladero, Edd Assistant Schools Division Superintendent Bac Chairperson For Goods And Consulting Services

Details: Description Lot A 23 Box Clearbook, A4 Size (piece)refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 310mm X 235mm (min.), Thickness: 0.5mm (min.), Pocket: Transparent Plastic, Number Of Pockets: Twenty (20), Thickness: 0.04 Mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 23 Box Clearbook, Legal Size (piece) Refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 345mm X 235mm (min.), Thickness: 0.04mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 30 Piece Eraser, Plastic/rubber (piece) Rectangular, Dimension (l X W X T) (min.): Equivalent Volume Of 8,350mm3 422 Piece Sign Pen, Extra Fine Tip, Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.5mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 172 Piece Sign Pen, Fine Tip, Black 182 Piece Sign Pen, Medium Tip, Black (piece) , Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 43 piece Sign Pen, Medium Tip, Blue(piece) , Blue(piece) Ink Color: Blue, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 1 pack "wrapping Paper, Kraft, Weight: 65gsm (-5%), Size: Width: 914.4mm (36"") (-3mm), Length: 1,219.4mm (48"") (-3mm)" 25 pack  Battery, Dry Cell, Size Aa (pack) 1.5 Volts, Alkaline, Minimum Of Thirty (30) Minutes Runtime With A Current Draw Of 1.0 Amp Until Cut-off At One (1) Volt 19 pack  Battery, Dry Cell, Size Aaa (pack)1.5 Volts, Alkaline, Minimum Of Thirty (30 Min.) Runtime With A Current Draw Of 0.5 Amp Until Cut-off At One (1) Volt, Shelf Life: Five (5) Years (min) From Date Of Acceptance 19 Bottle Ink, For Stamp Pad (bottle) Volume (min): 50ml, With Applicator, Shall Conform With The Required Perfamnce Test: Dry Time, Stability Test, Resistance To Water, Effect On Rubber Stamp, Corrosion Of Stamp-pad Container 2 Unit Digital Voice Recorder, Built-in Memory: 4gb (expandable), Channel: Stereo, Recording & Playback Format: Mp3, Wma, Earphone Jack, Built-in Microphone, Usb Connectivity, Battery Life 20 Hours (min) (recording Mode, Mp3 128kbps 2 Unit Fire Extinguisher, Dry Chemical, Capacity In Terms Of Mass Of Extinguisher Medium: 4.5kg (10lbs), Purity Of The Chemical: 75% (min.), Duration Of Discharge: 10 Seconds (min.) 5 Piece Philippine National Flag (piece) Type: 1, Size: Length: 1,828.8mm (6') (-3mm), Width: 914.4mm (3') (-3mm), Material: 100% Polyester, With Certificate Of Accreditation From National Historical Commission Of The Philippines (nhcp) 4 Unit "external Hard Drive (unit) Capacity: 1tb, Weight: 181 G - 205 G, Storage Media: 2.5""sata Hdd, Rotational Speed: 5400 Rpm, System Requirements: 1. Ms Windows 7, Ms Windows 8, Ms Windows 10, Mac Os 10.7 Or Later, Linux Kernel 2.6.31 Or Later, Antivirus: Pre-installed Antivirus (optional), Accessories: With Usb 3.0 Cable And Product Manual In English" 17 Piece Flash Drive (piece) 64gb Capacity 7 Unit Computer Mouse, Wireless (unit)connection Type: Usb, Tracking Method: Optical, Resolution: 1,000 Dpi (min), High-definition Optical: 2.5x More Responsive Than Standard Optical Mouse, 1000dpi High Technology Delivers Smoother, More Accurate Cursor Control 15 Piece Light-emitting Diode (led) Light Bulb, 7 Watts, Power Consumption: 7 Watts (max), Color Temperature: 6,500 Kelvin, Lumen Output: Not Less Than 530 Lumens, Frequency Rating: 60hz, Color Rendering Index: 80 +/-10%, Input Voltage: 220-240 Volts, Ac, Socket Base: E27, Light Color: Cool Daylight, Power Factor: Not Less Than 0.90, Average Life: Not Less Than 15,000 Hours, Operating Temperature: ≥ 35°c 73 jar Glue, All-purpose (bottle) Gross Weight (min.): 200 Grams, Free Formaldehyde(max.): 0.1%, Adhesive Strength - No Slippage On Pasted Part, Solid Content (min.): 30%, Ph: 4 To 8,container: Plastic Jar, Cap: Plastic Non-stick Easy Open Twist Top, With Tapered Applicator Attached To The Cap 42 box Staple Wire, Heavy Duty (binder Type), 23/13, Type: Chisel Point, Thickness: 0.60mm (-0.05), Width: 13mm (0.20), Leg Length: 13mm (-0.30), Number Of Staples Per Strip:100, Number Of Staples Per Box: 1,000, Binding Capacity: 40-90 Sheets Of 70gsm Multi-purpose Paper 201 box Staple Wire, Standard (box) 5000 Wires Per Box, Dimensions, In Mm: (see Fig. 1), Width (w): 12.70 +0.15mm/-0.20mm, Leg Length (l): 6.00 +0.50mm/-0.20mm, Thickness (d): 0.40 + 0.05mm, Width (e): 0.50 + 0.05mm, Number Of Wires Per Strip: 100 (min) 12 roll Tape, Electrical, Made Of Polyvinyl Chloride (pvc), Width: 18mm (min.), Length: 16 Meters (min.), Assorted Colors 36 roll Tape, Masking, 24mm (roll)width: 24mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5n/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 68 roll Tape, Masking, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 70 roll Tape, Packaging, 48 Mm (roll) Color: Tan, Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 52 roll Tape, Transparent, 24mm (roll) Width: 24mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 69 roll Tape, Transparent, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 11 roll Twine, Plastic (roll) Weight Per Roll (min.): 1000g, Breaking Strength(min.): 25kg 20 piece Ruler, Plastic, 450mm (piece) Transparent/clear, Ruler Scale: Millimeters, Centimeters, Inches, Clear And Sharp Ruler Scales, Width: 38mm (min), Thickness: 1.30mm (min) 14 unit Calculator, Compact (unit) Width: 100mm - 130mm, Lcd Display, Capacity: 12 Digits, Two Way Power Source (solar And Cell) 10 boc Clip, Backfold, 15mm 87 box Clip, Backfold, 19mm (box) All Metal, Clamping Length: 19mm (-1mm), Clamping Depth: 10mm (min.), Thickness Of Metal: 0.20mm (min.), Diameter Of Clip Handles: 1.0mm (min.) 94 box Clip, Backfold, 25mm (box) All Metal, Clamping Length: 25mm (-1mm), Clamping Depth: 13mm (min.), Thickness Of Metal: 0.22mm (min.), Diameter Of Clip Handles: 1.20mm (min.) 36 box Clip, Backfold, 32mm (box) All Metal, Clamping Length: 32mm (-1mm), Clamping Depth: 14mm (-1mm) Thickness Of Metal: 0.30mm (min.), Diameter Of Clip Handles: 1.45mm (min.) 26 box Clip, Backfold, 50mm (box) All Metal, Clamping Length: 50mm (-1mm), Clamping Depth: 25mm (-1mm), Thickness Of Metal: 0.33mm (min.), Diameter Of Clip Handles: 1.85mm (min.) 252 piece Correction Tape (piece) Disposable, Dispensing Mechanism: Gear Type, Dispensing System: Single Line Tape 21 piece Cutter/utility Knife, For General Purpose (piece) Length: 100mm (+2mm), Width: 16mm (+2mm) Thickness: 0.40mm (+0.02mm) 85 piece Data File Box (piece) Outside Dimension: Width: 125mm (min), Height: 230mm (min), Length: 400mm (min), Material: Chipboard: 3mm Thick (min) 53 piece Data Folder (piece) Dimension: Width: 75mm (min), Height: 230mm (min), Length 380mm (min), Material: Chipboard: 2,5mm Thick (min) 11 piece Dater Stamp (piece) With Locking Mechanism, With Self-inking Stamp, With Removable And Refillable Ink Pad, Single Color, Size Of Imprint: 30mm X 45mm (min) 9 box Envelope, Documentary, A4 (box) 14 box Envelope, Documentary, Legal, (box) Size: 254mm X 381mm (-2mm), Basis Weight: 150gsm (-5%), Thickness (min.): 0.22mm 12 box Envelope, Expanding, Kraft (box) Legal Size: 380mm X 250mm (-3mm), Expansion: 50mm (-3mm), Thickness (min.): 0.38mm 4 box Envelope, Expanding, Plastic (box) 10 box Envelope, Mailing (box) 13 piece Eraser, Felt, For Blackboard/whiteboard (piece) Overall Size (l X W X T) (min.): 125mm X 45mm X 19mm 30 box Fastener, Metal (box) Thickness: Base With Prongs And Compressor: 0.30mm (min.), Material: As Per Sample Provided, Able To Hold 25mm Thick Of Multipurpose Paper (70gsm), 70mm Between Prongs 43 piece File Organizer, Expanding, Plastic, Legal (piece) With 12 Inside Pockets With Index Tab, For Legal Size Paper /documents, Dimension (min.): Cover (flap): Width: 220mm Length: 380mm Thickness: 0.60mm, Inside Pocket: Width: 230mm Length: 360mm Thickness: 0.12mm 49 pack "file Tab Divider, A4, For 210mm X 297mm (a4 Size) Documents, Size (min): Leaf: Length: 297mm Width: 210mm Tab: Length: 65mm Width: 12mm, Basis Weight: 153gsm (-5%), Thickness: 0.22mm (min.) " 37 pack Folder, L-type, Legal, Materials: Plastic, Size: 235mm X 346mm (min.) Thickness: (min.): 0.17mm, Transparent For Easy Identification Of Contents, Assorted Colors 3 box "folder, Pressboard (box) • Material: Heavy Duty Paper Board • Size: 369mm X 242mm (-smm) • Thickness: 0.40mm (min.) • Basis Weight: 312gsm (min.) • Color: Cream, Green Or Maroon, Etc. • Accordion-pleat Gusset: Latex Paper/pvc Bookbinder/book Cloth/paper Cloth, Color: Green, Red, Blue, Expansion: 39mm (-3mm)" 1 pack Folder With Tab, A4, Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 45 pack Folder With Tab, Legal (pack) Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 27 box "index Tab (box) Transparent, Self-adhesive, Assorted Colors, Five (5) Sets Per Box, One (1) Set Composed Of 2-pieces 6"" Tab Strip And Two (2) Complete Alphabets" 40 piece Magazine File Box, Large, Material: Chipboard: 3mm Thick (min.), Leatherette Paper For Outside Cover, Coated Paper For Inside Cover, Outside Dimension: :width: 110mm (min), Height: 265mm (min), Length: 220mm (min) 36 set Marker, Flourescent (set) Barrel: Flat, Tip: Chisel Point, Color: Three (3) Assorted Colors Per Set, Material And Structure: The Barrel And The Cap Shall Be Made Of Plastic And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Will Easily Cap And Uncap, Quality: Writing Performance: Flourescent Marker Shall Continuously Highlight On Multipurpose Paper For A Distance Of At Least 100 Meters Under Normal Pressure And Shall Not Show Noticeable Change In Ink Intensity. Cap-off Time: 45 Minutes (min) 225 piece Marker, Permanent, Black (piece) Ink Color: Black, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 80 piece Marker, Permanent, Blue (piece) Ink Color: Blue, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 86 piece Marker, Whiteboard, Black (piece) Ink Color: Black, Blue, Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 19 piece Marker, Whiteboard, Red, Ink Color: Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 76 box Paper Clip, Vinly/plastic Coated, 33mm (box) Wire Diameter: 0.80mm (min), Length Of Clip: 33mm (min), Total Length Of Wire Used: 102mm (min), Assorted Colors 100 Box Paper Clip, Vinly/plastic Coated, Jumbo, 50mm (box) Wire Diameter: 1.0mm (min), Length Of Clip: 50mm (min), Total Length Of Wire Used: 155mm (min), Assorted Colors 19 Box Pencil, Lead/graphite, With Eraser, Hardness: Hb Or 2, Lead/graphite Diameter: 2mm (min), Wood Casing: Softwood, Coated, Free From Defects As Cross Grains, Interlocked Grains, Warpage Knots And The Like; And Shall Permit Easy Sharpening 11 Piece Pencil Sharpener, Table Mountable Type, With Metal Clamp, Single Cutter-head, One Hole Guide, 9-10mm In A Diameter, All Main Parts Shall Be Made Of Metal Particularly The Cutting Mechanism Cutter,pinion Gear,internal Gear,handle 23 Piece Puncher, Paper, Heavy Duty (piece) Punching Capacity: 30 Sheets Of 70gsm Multipurpose Paper, With Two Hole Guide, Diameter Of Hole: 7mm (approx) 19 Box Rubber Band No. 18 (box) 35o Grams (min) (net Weight), Thickness: 1.00mm (min), Lay Flat Length: 70mm (min), Tensile Strength: 9.81mpa (min), Elongation: 250% (min) 31 Piece Stamp Pad, Felt (piece) Thickness Of Felt: 5mm (min.), Thickness Of Metal: 0.20mm (min.), Stamp Bed Size: Width: 60mm (min.), Length: 100mm (min.) 68 Pair Scissors, Symmetrical/asymmetrical (pair) Overall Length: 160mm (min), Length Of The Cutting Blade: 70mm (min), Thickness Of The Cutting Blade: 1.70mm (min), Length Of Metal Handle (measured From The Center Of The Binding Rivet Screw To The Tip Of The Metal Handle): 35mm (min) 37 Piece Stapler, Standard Type (piece) Loading Capacity: 200 Staples (min), One Time Binding Capacity Of 2-20 Sheets Multi-purpose Paper (70gsm)r 6 Unit Stapler, Heavy Duty (binder) (unit) Type: Desktop, High Capacity/volume, Compatible With The Following Staple Sizes: 13mm And 17mm, Material: Body: Metal, Bases Grip: Non-skid Durable Material, Stapling Capacity: 25-135 Sheets Of 70gsm Multi-purpose Paper, Load Capacity: 100 Staples (min), Throat: Depth: 65mm (min) With Adjustable Paper Guide, Dimension: Manufacturer's Standard 9 Piece Tape Dispenser, Table Top (piece) Net Weight (min.): 1.2kg, Body Made Of Rigid Plastic, Smooth Finish: Weighted, Serrated Cutting Blade Thickness: 0.40mm +0.03mm, Holds Rolls Up To 24mm Wide On 75mm Core, Assorted Color 17 Pack Cartolina, Assorted Colors (pack) Bristol Board, Size: 572mm X 724mm (-3mm), Basis Weight: 100gsm (min.), Thickness: 0.12mm (min.), Assorted Colors: Blue, Green, Yellow, Orange, Lavender, Violet, Gold And Pink, Minimum Of Four (4) Colors 158 Pad "notepad, Stick-on, 50mm X 76mm (pad) Size: 50mm X 76mm (2"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 175 Pad "notepad, Stick-on, 76mm X 100mm (pad) Size: 76mm X 100mm (3"" X 4"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 98 Pad "notepad, Stick-on, 76mm X 76mm (pad) Size: 76mm X 76mm (3"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 153 Piece Steno Notebook (piece) Basis Weight: 55gsm (-5%) Bond, Thickness: 0.075mm (min), Size: 150mm X 225mm, (min), Top Margin: 25mm (min.), Bottom Margin: 5mm, Number Of Spaces: 22 (min), Cover Thickness: 0.40mm (-0.02mm), 40 Leaves, Ruled Both Sides 40 Bond Paper , Legal, 70 Gsm 40 Ream Bond Paper , A4, 70 Gsm 591 Ream Paper, Multicopy A4 (ream) Basis Weight: 80gsm (-3%), Size: A4, 210mm X 297mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 156 Ream Paper, Multicopy Legal (ream) Basis Weight: 80gsm (-3%), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 419 Ream Paper, Multipurpose A4, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 93 Ream Paper, Multipurpose Legal, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 15 Box Paper, Parchment, Size: 210mm X 297mm (+2mm In Either Direction), Basis Weight: 80gsm (-5%), Fine Translucent, Suitable For Laser/inkjet Printing 48 Book Record Book, 300 Pages (book) Basis Wieght: 55gsm (-5%), Thickness: 0.07mm (minimum), Size: L X W: 265mm X 165mm (minimum), Cover Material: Laminated Chipboard, Thickness: 1.5mm (minimum) Size: L X W: 278mm X 175mm (minimum), Margins Top: 25mm (-2mm), Bottom: 8mm (+4mm), Left / Right: Manufacturer's Standard 37 Book "record Book, 500 Pages (book) Basis Weight: 55 Gsm (-5%) Thickness 0.07 Mm (minimum) Size L X W: 265mm X 165mm (minimum) Cover Material Laminated Chipboard Thickness 1.5mm (minimum) Size L X W: 278mm X 175mm (minimum) Margins Top 25mm (-2mm) Bottom 8mm (±4mm) Left / Right Manufacturer’s Standard" 35 Cart Ink Cartridge, Epson C13t664100 (t6641), Black 30 Cart Ink Cartridge, Epson C13t664200 (t6642), Cyan 30 Cart Ink Cartridge, Epson C13t664300 (t6643), Magenta 30 Cart Ink Cartridge, Epson C13t664400 (t6644), Yellow 1054 piece Ballpen 36 pack Sticker Paper , A4, Matte, White, 10 Pcs/pack 21 pack Sticker Paper , Legal, Matte, White, 10 Pcs/pack 25 roll Double Sided Tape 31 pack Photo Paper, A4 Size, Glossy, 10 Sheets/pack 15 packs Photo Paper Legal 4 bottle Disinfectant Bleaching Solution, 3.78 Lit 67 piece Certificate Frame, A4, Orientation: Landscape, Pvc Black 195 piece Certificate Holder, A4, Plastic 1 unit Microphone 74 box Plastic Fastener, Size: Regular (50pcs/box) 14 box Plastic Fastener, Size: Long 2 piece Extension Cord 2 pack Push Pin 12 piece Glue Stick (paste) 5 pack Glue Stick (for Glue Gun) 2 unit Ergonomic Chair, (midback Synthetic Leather Finished Office Chair- Padded Steel Armrest With Heavy Duty Base With Nylon Caster Wheels, With Pneumatic Gaslift For Height Adjustment) 1 unit Executive Chair (for Fo Head) 2 unit Glue Gun 2 unit Speakers 113 bottle Ink Cartridge, Epson 003 Yellow 109 bottle Ink Cartridge, Epson 003 Magenta 109 bottle Ink Cartridge, Epson 003 Cyan 131 bottle Ink Cartridge, Epson 003 Black 10 bottle Ink Cartridge, Hp Gt52 Yellow 10 bottle Ink Cartridge, Hp Gt52 Magenta 10 bottle Ink Cartridge, Hp Gt52 Cyan 10 bottle Ink Cartridge, Hp Gt53 Black 18 bottle Ink, Brother, Black, Btd60bk, 108ml 9 bottle Ink, Brother, Cyan, Bt5000c, 48.8ml 9 bottle Ink, Brother, Yellow, Bt5000c, 48.8ml 6 bottle Ink, Brother, Magenta, Bt5000c, 48.8ml 37 bottle Ink Refill, Epson Ink 001, Black, 127ml 29 bottle Ink Refill, Epson Ink 001, Cyan, 65ml 29 bottle Ink Refill, Epson Ink 001, Magenta, 65ml 29 bottle Ink Refill, Epson Ink 001, Yellow, 65ml 5 Box Sign Pen, Uniball-impact Gel, Ruber Grip, Steel Point, Water-based Pigment Gel Ink 1.0% Ball, Approx 0.6% Line, 12 Pcs/box 58 Piece Sign Penm Black, Gel 0.7mm 12 Piece Sign Pen, Ink Refill, 0.5, My Gel 3 Meter Pdx Loomex Wire 2 Cart Tonner (5501i, No. Tk6309) 12 Packs Notarial Seal Box Notarial Seal (gold), No. 23, 25pcs/box 1 Piece Glass Top Corner Table 2 Piece Steel Filing Cabinet Four Drawers, Vertical 15 Packs Specialty Board, A4 21 Pad Sign Here Sticky Note Pad 30 Packs Specialty Paper, A4 Lot B 58 Bottle Alcohol, Ethyl, 500 Ml, 68% - 72% Ethyl Alcohol, Fully Miscible In Water, Flip-top Cap, Scented 49 Gallon Alcohol, Ethyl, 1 Gallon, , Strength: 68% - 72%, Volume: 1 Gallon, Bottle: Hdpe 51 Can Air Freshener (can) Aerosol Type, Net Content: 150g (min), Assorted Scents (at Least Three (3) Scents), Long Lasting Fragrance (scent Trace Lingers For Atleast 5 Min.) 10 Piece Broom (walis Tambo) (piece)weight: 500 Grams (max), Handle: Plastic Coated Aluminum Tube, Diameter Of Handle: 19mm (min), Length Of Handle: 545mm (min), Dry Weight Of The Tiger Grass: 200grams (min), Usable Length Of Tiger Grass: 300mm (min), With Upper Stitch: 20 (min) Lower Stitch: 30 (min) 5 Piece Broom (walis Ting-ting) (piece) Made Of Mature Coconut Midribs, Standard Size (min.): 140mm Grip, Measured 150mm From The Top,usable Length (min.): 760mm, Rib Count (min.): 350 Pieces 55 Bottle Cleaner, Toilet Bowl And Urinal (bottle) Color: Cear Or Blue, Net Content: 900ml - 1000ml In Rigid Plastic Bottle, Not Chlorine Based, Viscosity: 114cp At 25°c Min Using Ostwald Method 15 Bar Detergent Bar (piece) Net Weight: 140 Grams As Packed (-2.5%) 30 Pouch Detergent Powder, All-purpose, 1kg, Net Weight: One (1) Kilogram (-2.5%) 51 Can Disinfectant Spray (can) Aerosol Type, Net Content Per Can: 400 Grams (min), Crisp, Clean Scent 11 Piece Dust Pan (piece) Made Of Rigid Non-breakable Plastic, With Detachable Handle: Diameter (min.): 30mm, Length (min.): 600mm, Base (min.): Thickness: 1.25mm, Front Width: 260mm, Back Width: 200mm, Depth: 225mm 13 Can "furniture Cleaner (can) Aerosol Type • For All Types Of Surfaces Such As Furniture, Cabinets And Countertops, Vinyl And Leather, Etc. • Net Content (min.): 300mi Per Can • Pleasant Smell. • Sufficient Amount Of Propellant To Totally Expel Content. • Shelf Life: Must Have A Shelf Life Of At Least Twenty-four (24) Months From The Date Of Manufacture But Not Less Than Eighteen (18) Months From The Date Of Delivery" 48 Bottle Hand Soap, Liquid, 500ml (bottle) Mild Scented, Bactericidal/germicidal Property, Individual Packed Plastic Bottle, Packaging: Standard Packaging Of The Manufacture 1 Unit Mop Bucket, Heavy Duty, Hard Plastic, Material: Hard Palstic, Approximate Size (min.), Width: 370mm Length: 475mm Height: 245mm, Capacity: 30 Liters 4 Piece Mophandle, Heavy Duty, Screw Type, Screw Type, With Metal Mop Head Clipper, Aluminum Handle: Thickness (min.): 0.70mm, Outside Diameter: 22mm To 25mm Length (min.): 1.5 Meters 10 Piece Mophead, Made Of Rayon, 36 Stands Per Head (min), 3 Ply's Per Stand, 40 Threads Per Ply, Weight:400 Grams (min), Length: 410mm (min), Length Of Band: 170mm (min), Breaking Strength, Kg: 126 (min) 5 Kilo "rags All Cotton (bundle) Diameter: 178mm (7"") (approx.) Minimum Of Thirty-two (32) Pieces To A Kilogram, Assorted Colors" 7 Pack Scouring Pad (pack) Made Of Synthetic Nylon, 150mm X 200m (min.), Thickness (min.): 8mm, Color: Green 56 Pack/roll "trashbag, Xxl Size (roll/pack) Color: Black, Dimension: 940mm X 1016mm (-6mm) (37"" X 40""), Thickness: 0.02mm (min), Tensile Strength At Break: Astm D882, One Way: 15n/mm² (min), Other Way: 12n/mm² (min), Elongation At Break: Astm D882, One Way: 400% (min), Other Way: 600% (min)" 54 Pack/roll Trashbag, Large Size (roll/pack) 29 Pack/roll Trashbag, Xl Size (roll/pack) 19 Piece Wastebasket, Non-rigid Plastic, Made Of Rigid Plastic, Thickness (min.): 1.20mm, Height (min.): 225mm, Full Volume (up To The Lid): 8.5 Liters (min.), Assorted Colors 44 bottle Dishwashing Liquid Lemon/calamansi 25 pcs Dishwashing Paste, 200g 34 Pack Tissue, Interfolded Paper Towel (pack) Basis Weight: 34gsm (+/-2gsm), Sheet Dimension: Width Of Sheet: 200mm (+3mm), Length Of Sheet: 200mm (+3mm), Total Number Of Sheets Per Pack: 150 Pulls, Interfolded, Number Of Ply: One (1) Ply 164 Pack Toilet Tissue Paper, 2 Ply (pack) , 100% Recycled, 12 Rolls Per Pack, Weight: 28gsm (min.), Sheet Dimension: Width Of Sheet: 100mm (+/-3mm), Length Of Sheet: 114mm (-5mm) 18 Bottle Hand Sanitizer (bottle) Form: Liquid Or Gels, Volume: 500ml, Hypoallergenic, Non-drying, Bottle: Pump Dispenser Plastic, Fda Certificate Of Product Registration/notification 20 Can Insecticide (can) Aerosol, Kerosene Based, Quick Kill Contact And Residual Type, Cautionary Scent/odor Required, Multi-insect Killer, Net Content Per Can: 600ml (min.) 41 piece Toilet Deodorant Cake, Assorted, 100grms 6 Pcs Doormat Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through General Fund / Sb No. 1 Cy 2024, Intend To Apply The Sum Of P 27,999,814.70 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Tenement Housing, Paitan, Brgy. Dalipuga, Iligan City With Project No. Cb(b)-24-115 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Construction Of Tenement Housing, Paitan, Brgy. Dalipuga, Iligan City General Requirements •installation Of Project Billboard •occupational Safley And Health Program •mobilization And Demobilization •permits And Clearance •provision Of Field Office For The Engineer •field Office With Office Table, Chair, Photocopier Ink And Storage For Materials •elpdc21 Full Hd 1080p Document Camera •desktop Computer Set W/ Complete Accessories Earthworks •staking/lay-out Of Lines, Grades, Elevations And Distances •excavation Work For Pedestal Footings,septic Tanks, Catch Basins •gravel Bedding For Pedestal Footings, Grease Trap And Catch Basin •backfilling Of Common Soil Using Excavated Soil Must Be Compacted Layer By Layer Concrete Works (4000 Psi) •footing-pedestal •tie Beam •grease Trap And Catch Basin •septic Tanks •ground And Second Floor Concrete Slab (125 Mm Thk.) •stairs And Pwd Ramp •footing, Column And Slab For Metering Station •watertank Platform Masonry Works And Plastering Works •chb Wall For Partition And Metering Station1 •septic Tanks, Catch Basin And Grease Trap •watertank Platform Tiling Works •floor And Wall For Additional Cr's Painting Works •exterior And Interior Chb Wall •drywall Partition •new Painting For Ceiling ( 1st And 2nd Floor ) Structural Steel Works •column 1- W6x15 •beam 1- •column 2- W12.x53 •beam 2- •truss 1 & Truss 2 •handrail And Post For Stairs •2"x6"x2mm C Purlins •2"x3"x1.2mm C Purlins At Metering Station •16mm Dia. Cross Bracing With Std. Tumbuckel •3" Ø G.i. Pipe For Pedestal Col. At Metering Station •use 50mmx100mm Rec. Tube For Girt At Metering Station •use 50mmx50mm Rec. Tube For Truss At Metering Station •use 50mmx50mm Rec. Tube For Frame And 3"x3" Wire Mesh Cage At Metering Station •all Steel Should Be Painted With Red Oxide Primer And Top Coat With Quick Drying Enamel Electrical Works •installation Of All Electrical Conduits, Junction Box Utility Box, Electrical Panelboard According To Its Location In The Electrical Plan •installation Of Electrical Wires, Lighting Fixtures, Switches, Convenience Outlet, Aircon Outlet According To Its Location In The Electrical Plan. •termination Of All Wires In Every, Switches, Lighting Fixtures, Convenience Outlet, Aircon Outlet ,and Circuit Breaker In The Electrical Panelboard. •testing All Circuit Using The Multimeter •installation Of Service Entrance Conduit,cable And Kilowatt Hour Meter. •prepared The Electrical System For Energization. •installation Of Alarm System. Fire Protection Works •installation Of 1"ø B.i. Pipe, Sch 40 For Branch Lines. •installation Of 1 1/2" Ø B.i. Pipe, Sch 40 For Risers. •installation Of 2" Ø B.i. Pipe, Sch 40 For Cross Main. •installation Of 4" Ø B.i. Pipe, Sch 40 For Feed Main. •installation Of Sprinklers , Both Pendant And Upright Sprinklers . •installation Of Standpipes. Reinforcing Steel •footing-pedestal For Tenement Housing •footing-pedestal For Metering Station •grease Trap And Catch Basin •septic Tanks •watertank Platform Ceiling Works •ceiling Works At 2nd Floor Drywall Partition •use Drywall Partition At Bedroom Area Formworks, Scaffolding & Steel Deck •use 0.8mm Thk. Steel Deck •use 1 1/2" Gi Pipe For Scaffolding With Fixed And Swing Clamp Roofing Works •use 0.4mm Thk. Couloured Rib Type Roof For Tenement Housing And Metering Station •install Fascia Cover,gutter And Ridge Roll Plumbing Works •install Pipes (water, Soil And Waste Pipes) •installation Of Water Closets And Faucets •installation Of Kitchen Sink (heavy Duty) And Faucet For Every Units Installation Of Downspout Connected To Rain Water Collector •install 2 Sets-5,000 Liters Of Tank With 2 Sets Of 2hp Pump For Rain Water Collector Doors And Windows •d1- 1.0mx2.1m Wooden Solid Core Door With Complete Accessories •d2- 0.7mx2.1m Pvc Door With Exhaust Vent For Cr •d3- 0.8mx2.1m Hollow Core Door With Entrance Lockset •w1- 1m X 0.6m Fixed Bottom And Top Awning Window •w2- 0.4m X 0.4m Awning Window With Pvc Framing •w3 - 1.2mx1.2m Pvc Frame Sliding Window Brise Soleil •install Brise Soleil To Conceal Ac Unit And Air-dried Clothes •use 50mmx3mm Flat Bar, See Plan For Details I.general Requirements A.project Billboard (q = 2.00 Set) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 14' Coco Lumber, 2"x 3"x 10' Coco Lumber, 2"x 2"x 8' Coco Lumber, Assorted Sizes C.w Nails. B.occupational Safety And Health Program (q = 1.00 Lot) Includes Safety Signages, Caution Tape, Hard Hat, Rubber Gloves, Welding Apron, Safety Boots. C.mobilization / Demobilization (q = 1.00 Lot) D. Permits And Clearance (q = 1.00 L.s.) Includes Fire Safety Evaluation Fee, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3). E. Provision Of Field Office For The Engineer (q = 1.00 Lot) Includes Field Office For The Field Engineer (field Office With Office Table, Chair And Storage For Materials), Elpdc21 Full Hd 1080p Document Camera, Photocopier Ink, Desktop Computer Set W/ Complete Accessories: Processor: Ryzen 5 5600x, Ram: (16gb) 8gbx2 3600mhz, Psu: 650w 80+ Gold True Rated Modular, Gpu: Nvidia Rtx 3060, Ssd: Soogb Nvme M.2, Aio Cooler: 240 Aio Cooler, Monitor: 165hz 23.8", Ups: Minimum To 650 Watts, Others: Fans, Mouse, Keyboard, And Mouse Pad. Ii.earthworks (q = 256.12 Cu.m.) Includes Imported Soil Iii.gravel Bedding (q = 130.00 Cu.m.) Includes Washed Gravel Iv.concrete Works (4000 Psi) (q = 182.84 Cu.m.) Includes 4000 Psi Premix Concrete (including Sky Pump), Portland Cement, Washed Sand, Washed Gravel. V.masonry Works (q = 1,917.40 Sq.m.) Includes Building Walls: 4" Chb 350psi, Portland Cement, Washed Sand, 10mm Ødsb X 6m; Metering Station: 4" Chb 350psi, Portland Cement, Washed Sand, 10mm Ødsb X 6m; Watertank Platform: 4" Chb 350psi,portland Cement, Washed Sand, 10mm Ødsb X 6m; Septic Vault: 4" Chb 350psi, Portland Cement, Washed Sand, 10mm Ødsb X 6m; Catch Basin: 4" Chb 350psi, Portland Cement, Washed Sand, 10mm Ødsb X 6m. Vi.plastering Works (q =3,812.00 Sq.m.) Includes Portland Cement, Screened Sand. Vii.tiling Works (q =232.40 Sq.m.) Includes Cr Flooring: 20cmx20cm Ceramic Tiles, Portland Cement, Washed Sand, Tile Adhesive; Cr Walling: 60cmx60cm Ceramic Tiles, Portland Cement, Washed Sand, Tile Adhesive Viii.painting Works (q =4,540.00 Sq.m.) Includes Skimcoat, Concrete Primer, Latex Paint (for Final Coat, 2coats), Body Filler, Paint Tray, Paint Brush, Paint Roller, Masking Tape, Sand Paper, Old Newspaper, Paint Thinner. Ix.reinforcing Steel (q =14,361.71 Kgs.) Includes 10mm Ø Dsb X 6m, 12mm Ø Dsb X 6m, 16mm Ø Dsb X 6m, No. 16 G.i.tie Wire. X.ceiling Works (q =364.00 Sq.m.) Includes 4.5mm Thk X 4' X 8' Ficem Board, Double Furring, 0.40mm Thk. X 19 X 50 X 19 X5m, Carrying Channel, Hanger Rod, Channel Clip, Wall Angle, Blind Rivets (1000pcs/box), Metal Screw. Xi.drywall Partition (q =737.52 Sq.m.) Includes 4.5mm Thk X 4' X 8' Hardilite Ficem Board, Metal Studs, 0.50mm Thk. X 2" X 3" X 2" X 3.00m, Blind Rivets (1000pcs/box), Hardiflex Screw ( Flat Head) #7x 25mm (500 Pcs). Xii.formworks, Scaffolding & Steel Deck (q =198.00 Sq.m.) Includes 3/4" X 4' X 8' Marine Plywood, Coco Lumber Assorted, 11/2" Gi Pipe (scaffold) - Rental, Fixed And Swing Clamp, 0.8mm Thick Steel Deck, Assorted Nails. Xiii.structural Steel Works (q =1.00 Lot) Includes W10x33, W12x53, W6x15, 20mm Thk Base Plate, Anchor Bolt L-type With Nut And Washer, 5/8 " X 24", Tension Rod 16mm Dia.,turn Buckles (16mm Dia.), Welding Rod (6011), 4" Cutting Disk, 4" Grinding Disk, Grout, 2"x2"x1/4" Angle Bar, 1"x1"x3mm Angle Bar, 2"x6"x2mm C Purlins, C-purlins 50x75 X 12 X 1.2x 6000mm, 3" Ø G.i. Pipe X 6m (540), Rectangular Tube 50x50x1.0mm, Rectangular Tube 50x100x1.0mm, 3" X 3" X 3.5mm Thk. Wire Mesh 6'x20', 38mm X 38mm Square Tube In Black Powdered Coat Finsh, 12mm Square Tube In Black Powdered Coat Finsh, Red Oxide Primer, Quick Dry Enamel, Paint Brush (101 Mm), Paint Thinner. Xiv. Roofing Works (q =639.24 L.m.) Includes 0.4mm Thick Rib Type Roofing, 0.4mm Thick Fascia Cover, Pre-painted Gutter (ga 24), Pre-painted Ridge Roll (ga 24), Tekscrew. Xv.electrical Works (q =1.00 Lot) Includes Beehive Lighting Fixture 6" Dia. E27 Socket; Led Bulb 6w, 230v, Daylight; Led Bulb 10w, 230v, Daylight; Ts Tube 20w Lighting Fixture; Single Gang Switch 230v; Two Gang Switch 230v; 2 Gang Convenience Outlet With Ground; 3 Way Single Gang Switch, 230v; Air Conditioning Outlet With Ground, 230v; Electrical Panelboard Plug In Type 2 Pole 4 Holes Emergency Light With 2 Bulb, 230v; 2.0mm 2 Thhn Stranded Copper Wire; 2.0mm 2 Thhn Stranded Copper Wire (grnd); 3.5mm 2 Thhn Stranded Copper Wire; 3.5mm 2 Thhn Stranded Copper Wire (grnd); 5.5mm2 Thhn Stranded Copper Wire (grnd); 5.5mm 2 Thhn Stranded Copper Wire; 8.0mm2 Thhn Stranded Copper Wire; 22.0mm 2 Thhn Stranded Copper Wire (grnd); 30.0mm2 Thhn Stranded Copper Wire; 60.0mm 2 Thhn Stranded Copper Wire; Junction Box Pvc 4x4"; Utility Box 2x4"; Pvc 15mm; Pvc 25mm; Pvc 40mm; Emt 50mm; Emt Coupling 50mm; Emt Elbow 50mm; Emt Connector 50mm; Service Entrance Cap 50mm; Safety Breaker 2 Pole Surface Mount 40at Bolt On Type With Housing; Safety Breaker 2 Pole Surface Mount 10at Bolt On Type With Housing; 15at Circuit Breaker 2 Pole Plug In Type; 20at Circuit Breaker 2 Pole Plug In Type; 40at Circuit Breaker 2 Pole Plug In Type; 30at Circuit Breaker 2 Pole Bolt On Type; 20at Circuit Breaker 2 Pole Bolt On Type; 100at Molded Case Circuit Breaker 3 Pole Bolt On Type 25kaic ,230v Tqd; 175at Molded Case Circuit Breaker 3 Pole Bolt On Type , 10kaic Tqd; Nema 3r 3 Pole Enclosure For 175at Mccb Tqd; Electrical Panelboard 8 Branches Plus 1main Tqd, 3 Pole Bolt On Type; Supply Of 25kva, 13.2kv/230v, Transformer Station & Accessories; 40-ft Concrete Pole With Guy & Anchor, 3-spool Secondary Racks; Emergency Exit Lamp; Electrical Tape; Wire Gutter 8x8x48"; Electrical Meter Base Class Ooa Round Type 1/2"; Single Phase Kw-hr Meter (digital Type) 1-210 Cl200 2w 240v, 30-200a; Electrical Rubber Tape; Solvent Cement 100cc. Xvi.fire Protection Works (q =1.00 Lot) Includes 1"ø B.i. Pipe, Sch 40 (branch Line) - 6m/pc; 11/2" Ø B.i. Pipe, Sch 40 (riser) - 6m/pc; 2" Ø B.i. Pipe, Sch 40 (cross Main) - 6m/pc; 4" Ø B.i. Pipe, Sch 40 (feed Main) - 6m/pc; 1" Ø B.i. 90 Deg Elbow, Sch 40; 11/2" Ø B.i. 90 Deg Elbow, Sch 40; 2" Ø B.i. 90 Deg Elbow, Sch 40; 4" Ø B.i. 90 Deg Elbow, Sch 40; 1" Ø B.i. Tee, Sch 40; 2" Ø B.i. Tee, Sch 40; 4" Ø B.i. Tee, Sch 40; 4" Ø To 2" Ø B.i. Tee Reducer, Sch 40; 2" Ø To 11/2" Ø B.i. Tee Reducer, Sch 40; 11/2" Ø To 1" Ø B.i. Tee Reducer, Sch 40; 1" Ø To 3/4" Ø B.i. Reducer, Sch 40; 11/2" Ø To 1" Ø B.i. Reducer, Sch 40; 3" Ø B.i. Blind Flange, Ansi #150 W/ Accessories; 6" Ø B.i. Blind Flange, Ansi #150 W/ Accessories; 2" Ø Gate Valve; 4" Ø O.s. & Y. Gate Valve; 4" Ø Swing Check Valve; 2" Ø Check Valve; 1" Ø Ball Valve; Pressure Gauge; Waterflow Switch; 1" Ø Sight Glass; 2" Ø Sight Glass; Union; Siamese Fire Department Connection; 1" Ø Pipe Hanger (loop Hanger And Threaded Rod); 2" Ø Pipe Hanger (loop Hanger And Threaded Rod); 4" Ø Pipe Hanger (loop Hanger And Threaded Rod); 1" Ø Riser Clamp; 2" Ø Riser Clamp; 4" Ø Riser Clamp; 3/4" Ø Pendent Sprinkler Head; 3/4" Ø Upright Sprinkler Head; Fire Hose Cabinets W/ Accessories; Fire Extinguishers; Red Oxide Metal Primer; Alarm Bell; Manual Pull Station. Xvii.plumbing Works (q =1.00 Lot) Includes Two Piece Water Closet; Stainless Steel Kitchen Sink; Hose Bibb, Heavy Duty; Kitchen Faucet, Heavy Duty; 5000l Stainless Steel Tank; 4" Floor Drain; 4" Ø Sanitary Wye; 4"x2" Ø Sanitary Wye Reducer; 4" Ø Pvc Tee; 4" X 2" Ø Pvc Tee Reducer; 4" Ø Pvc 1/8 Bend; 4" Ø Pvc 1/4 Bend; 4" Ø Cleanout; 4" Ø Coupling; 4"x2" Ø Coupling Reducer; 4" Ø Pvc Pipe S1000; 3" Ø Sanitary Wye; 3" Ø Cleanout; 3" Ø Pvc 1/8 Bend; 3" Ø Pvc Pipe S1000; 2" Ø Pvc Pipe S1000; 2" Ø Pvc 1/8 Bend; 2" Ø Pvc 1/4 Bend; 2" Ø Pvc Wye; 2" Ø Pvc P-trap; 2" Ø Pvc Tee; 2" Ø Cleanout; 2" Ø Coupling; 1/2" Ø Ppr Pn10 Pipe; 1/2" Ø Ppr Tee; 1/2" Ø Ppr Elbow; Steel Strap; Solvent Cement; 2hp Centrifugal Pump. Xviii.doors And Win Dows (q =l.00 Lot) Includes Dl- 1.0mx2.lm Wooden Solid Core Door With Complete Accessories; D2- 0.7m X 2.1m Pvc Door With Exhaust Vent For Cr; D3- 0.8mx2.1m Hollow Core Door With Entrance Lockset; W1-1m X 0.6m Fixed Bottom And Top Awning Window; W2- 0.4m X 0.4m Awning Window With Pvc Framing; W3 - 1.2mx1.2m Pvc Frame Sliding Window. Xix.brise Soleil (q =2,847.20 Kgs.) Includes 50 X 3mm Flat Bar, Welding Rod, Cutting Disk, 10mm Dia. Expansion Bolt, 10mm Bi Plate, Grinding Disk. Approved Budget For The Contract (abc): P 27,999,814.70 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within Three Hundred Sixty (360) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Pre-procurement: October 8, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 2. Issuance Of Bid Documents: November 5 – November 26, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 3. Pre-bid Conference: November 12, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4. Submission Of Bids: November 26, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 5. Opening Of Bids: November 26, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 25,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: November 5, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-115 (ceo-infra)

Details: Description Item No. Item Description Qty Unit Approved Budget For Contract 1 Adapter Plug 3 Piece 320.10 2 Adding Machine Tape, 2" 20 Roll 810.00 3 Air Freshener Refill, For Auto Spray, 269ml 1 Piece 371.60 4 Air Freshener, 320ml/can 19 Can 5,352.30 5 Air Freshener, Auto Spray, 269ml 1 Piece 640.60 6 Alcohol, Ethyl, 70% Solution, 1gallon/bottle 1 Bottle 729.00 7 Alcohol, Ethyl, 70% Solution, 1liter/bottle Pump 2 Bottle 505.60 8 Alcohol, Ethyl, 70% Solution, 500ml/bottle 15 Bottle 1,678.50 9 Alcohol, Isopropyl, 70% Solution, 1gallon/bottle 21 Bottle 16,008.30 10 Alcohol, Isopropyl, 70% Solution, 500ml/bottle 95 Bottle 10,906.00 11 Alcohol, Isopropyl, 70% Solution, 500ml/bottle Pump 5 Bottle 739.50 12 Ballpen, Crystal Tech, 0.5, 50s/box, Black 17 Box 6,885.00 13 Ballpen, Crystal Tech, 0.5, 50s/box, Blue 1 Box 405.00 14 Ballpen, Crystal Tech, 0.5, Blue 51 Piece 413.10 15 Ballpen, Crystal Tech, 0.5, Red 50 Piece 405.00 16 Ballpen, Fine Tip, 0.5, Black 101 Piece 3,413.80 17 Ballpen, Fine Tip, 0.5, Blue 6 Piece 202.80 18 Ballpen, Fine Tip, 0.5, Red 5 Piece 169.00 19 Ballpen, Gel Pen, 0.5, Black 25 Piece 270.00 20 Ballpen, Gel Pen, 0.5, Blue 25 Piece 270.00 21 Ballpen, Gel Pen, 0.5, Red 5 Piece 54.00 22 Ballpen, Retractable, 0.5, Black 81 Piece 769.50 23 Ballpen, Retractable, 0.5, Blue 20 Piece 190.00 24 Ballpen, Retractable, 0.5, Red 10 Piece 95.00 25 Ballpen, Tech Point, 0.3mm, Black 5 Piece 472.50 26 Basin, Aluminum, Big 1 Piece 553.50 27 Basin, Aluminum, Small 2 Piece 379.40 28 Bathroom Mirror 3 Piece 4,920.90 29 Bathroom Soap, 125g/box 6 Box 348.00 30 Bathroom Soap, 175g/box 29 Box 2,346.10 31 Bathroom Soap, 55g/pack 3 Pack 72.00 32 Bathroom Soap, 85g/box 10 Box 474.00 33 Battery +c, 2pcs/pack 6 Pack 672.60 34 Battery, Dry Cell, Size Aa, 4pcs/pack 25 Pack 2,945.00 35 Battery, Dry Cell, Size Aaa, 4pcs/pack 17 Pack 2,594.20 36 Battery, Dry Cell, Size D, 1.5 Volts, 2pc/pack 2 Pack 191.20 37 Battery, Rechargeable, Size Aa, 2pcs/pack 3 Pack 2,124.30 38 Battery, Rechargeable, Size Aaa, 2pcs/pack 5 Pack 4,283.00 39 Bill/ Fingertip Moistener, 20g/canister 10 Canister 675.00 40 Bleaching Solution, 100ml/bottle 3 Bottle 34.20 41 Bleaching Solution, 1gallon/bottle 8 Bottle 1,382.40 42 Bleaching Solution, 1liter/bottle 30 Bottle 1,554.00 43 Bolo, Big 5 Piece 3,675.50 44 Bolo, Regular Size 5 Piece 3,004.00 45 Bond Paper, A4, Subs. 18, 500sheets/ream 20 Ream 5,394.00 46 Bond Paper, A4, Subs. 20, 500sheets/ream 2 Ream 621.00 47 Bond Paper, Legal, Subs. 18, 500sheets/ream 46 Ream 11,444.80 48 Bond Paper, Legal, Subs. 18, Colored, 500sheets/ream 2 Ream 999.00 49 Bond Paper, Legal, Subs. 20, 500sheets/ream 7 Ream 2,268.00 50 Bond Paper, Legal, Subs. 24, 500sheets/ream 5 Ream 2,194.00 51 Bond Paper, Letter, Subs. 18, 500sheets/ream 10 Ream 2,414.00 52 Bond Paper, Letter, Subs. 18, Colored, 500sheets/ream 7 Ream 3,307.50 53 Bond Paper, Letter, Subs. 20, 500sheets/ream 106 Ream 30,051.00 54 Book Paper, Letter, Subs. 20, 500sheets/ream 20 Ream 5,670.00 55 Bookbind Cover, Long, Clear Plastic, 5s/pack 2 Pack 405.00 56 Broom, Soft (tambo) 22 Piece 4,158.00 57 Broom, Stick (ting-ting) 19 Piece 1,411.70 58 Bulb, 11watts 5 Piece 661.50 59 Bulb, 9 Watts, Led Bulb Daylight 5 Piece 776.50 60 Bulb, Led, 25 Watts 3 Piece 2,106.00 61 Butane Canister Refill 5 Piece 675.00 62 Cable Ties 5inch 100pcs 12 Pack 2,916.00 63 Cable Ties 6inch 100pcs 12 Pack 4,844.40 64 Calculator, Basic Compact, 14 Digits 5 Piece 4,036.50 65 Car Deodorizer 3 Piece 1,012.50 66 Cartolina, Single, Colored 30 Pack 405.00 67 Cartolina, Single, White 11 Pack 148.50 68 Ceiling Cobweb Remover, Long Wooden/ Plastic Handle 2 Piece 837.00 69 Certificate Holder, A4 19 Piece 2,899.40 70 Certificate Holder, Short 6 Piece 939.60 71 Chopping Board, 12*10 Inches 1 Piece 418.50 72 Chopping Knife 6 Piece 1,385.40 73 Cleaner, Toilet Bowl And Urinal, 500ml/bottle 1 Bottle 139.10 74 Cleaner, Toilet Bowl And Urinal, 900ml/bottle 15 Bottle 3,036.00 75 Cleanser, Scouring Powder, 350g/canister 22 Canister 1,040.60 76 Cling Wrap 1 Roll 835.70 77 Clip Backfold, Metal Clamping, 32mm, 12s/box 6 Box 486.00 78 Clip Backfold, Metal Clamping, 41mm, 12s/box 8 Box 777.60 79 Clip Backfold, Metal Clamping, 50mm, 12s/box 2 Box 291.60 80 Clip Bulldog, Big, 12pcs/box 1 Box 178.20 81 Clip Bulldog, Small, 12pcs/box 1 Box 106.00 82 Clipboard, A4 Size, Metal Clamping, Plastic Board 1 Piece 189.00 83 Clipboard, Fc Legal, Metal Clamping, Plastic Board 6 Piece 1,207.20 84 Cloth, Franela 10 Piece 405.00 85 Coffee Maker 700w 1 Unit 2,159.70 86 Common Nail 2" & 3" 5 Kilo 661.50 87 Compact Disc, Rewriteable, With Case 213 Piece 28,755.00 88 Concrete Nails 2" 5 Kilo 540.00 89 Construction Paper, Assorted Colors, 10sheets/pack 5 Pack 169.00 90 Continuous Form, 1 Ply, 280x241mm (11x9 1/2), Subs. 20 6 Box 8,683.20 91 Correction Pen, 12ml/piece 7 Piece 898.10 92 Correction Tape Refill, 6m X 5mm, 2pcs/pack 1 Pack 91.20 93 Correction Tape, 8m X 5mm 99 Piece 6,019.20 94 Correction Tape, Refillable, 6m X 5mm 1 Pack 91.20 95 Cutter Blade, Heavy Duty Refill, 10pcs/tube 2 Tube 212.80 96 Cutter, Heavy Duty 5 Piece 506.50 97 Data File Box, Double 8 Piece 2,397.60 98 Data Folder 3" Ledger 70mm Long Two Tables Green 10 Piece 7,000.00 99 Dater Stamp, 3mm 7 Piece 1,375.50 100 Detergent Bar, 125g/piece 14 Piece 238.00 101 Detergent Bar, 380g/piece 43 Piece 1,887.70 102 Detergent Powder, 1kg/pack 17 Pack 2,599.30 103 Detergent Powder, 50g/pack 223 Pack 2,341.50 104 Digital Thermometer 10 Piece 2,387.00 105 Dipper 8 Piece 302.40 106 Dishwashing Foam, 100x70x40mm 4 Piece 207.20 107 Dishwashing Liquid, 240ml/bottle 44 Bottle 5,720.00 108 Dishwashing Liquid, 780ml/bottle 6 Bottle 1,814.40 109 Dishwashing Liquid, Refill, 550ml/pack 18 Pack 4,037.40 110 Disinfectant Liquid, Multi Surface Cleaner, 900ml/bottle 10 Bottle 2,522.00 111 Disinfectant Solution, Concentrate, 500ml/bottle 9 Bottle 6,293.70 112 Disinfectant Spray, 340g/can 10 Can 5,508.00 113 Disinfectant Spray, 510g/can 6 Can 4,333.80 114 Disposable Bowl, 100s/pack 8 Pack 2,376.00 115 Disposable Cups, 12oz, 25s/pack, Styro 6 Pack 546.00 116 Disposable Cups, 8oz, 25s/pack, Styro 11 Pack 517.00 117 Disposable Cups, 8oz, 50s/pack, Paper 6 Pack 557.40 118 Disposable Cups, Plastic, 25s/pack 8 Oz 56 Pack 1,573.60 119 Disposable Cups, Plastic, 50s/pack 12 Oz 8 Pack 587.20 120 Disposable Fork, 100s/pack 14 Pack 2,268.00 121 Disposable Fork, 25s/pack 2 Pack 78.80 122 Disposable Gloves, 50s/box 1 Pack 511.00 123 Disposable Gloves, 50's/box 40 Box 20,440.00 124 Disposable Paper Plate, 100s/pack 18 Pack 3,207.60 125 Disposable Spoon, 100s/pack 20 Pack 3,240.00 126 Disposable Spoon, 25s/pack 2 Pack 78.80 127 Door Latch Frame Set 1 Pack 2,700.00 128 Door Mat, Cloth 30 Piece 2,025.00 129 Door Mat, Rubber 9 Piece 3,766.50 130 Doorknob 1 Piece 1,098.90 131 Doorknob, Heavy Duty 3 Piece 5,670.00 132 Dustpan, Plastic, Large, With Handle 4 Piece 351.20 133 Ecg Tracing Paper 10 Roll 1,500.00 134 Electric Stove, Double Burner, Heavy Duty 1 Unit 1,618.70 135 Electric Stove, Double Burner, Heavy Duty, 1200watts Per Burner 1 Unit 3,631.50 136 Electrical Tape, Big 2 Piece 167.40 137 Electrical Tape, Small 12 Piece 518.40 138 Emersion Oil, 30ml (microscope) 2 Pieces 6,075.00 139 Envelope, Brown, A4, 500pcs/box 1 Box 2,700.00 140 Envelope, Brown, Legal, 500pcs/box 1 Box 3,375.00 141 Envelope, Brown, Legal, Single 95 Piece 646.00 142 Envelope, Brown, Short, Single 10 Piece 54.00 143 Envelope, Expanding, Kraftboard, Long 80 Piece 1,840.00 144 Envelope, Mailing, White, Long, 500s/box 3 Box 1,247.40 145 Essential Oil (for Air Purifier) 1 Bottle 945.00 146 Extension Cord, 10meters, 4 Port, Universal 2 Piece 2,700.00 147 Extension Cord, 3m, 6gang 7 Piece 4,725.00 148 Extension Cord, 4 Gang, 3-5meters, With Switch, Heavy Duty 3 Piece 3,240.00 149 Fabric Conditioner, 22ml/pack 155 Pack 1,674.00 150 Fabric Conditioner, 900ml/bottle 4 Bottle 758.00 151 Face Mask Disposable, Basic, 50s/pack 44 Pack 3,564.00 152 Face Mask, Kn95 10s/box 5 Box 2,430.00 153 Face Mask, Kn95 10's/box 10 Box 4,860.00 154 Facial Tissue, 100s/pack 10 Pack 1,377.00 155 Fire Extinguisher Refill Per Lbs 100 Pound 8,100.00 156 Flash Drive, 16gb 2 Piece 675.00 157 Flash Drive, 32gb 9 Piece 4,860.00 158 Flashlight, Rechargeable 12 Piece 11,032.80 159 Flat Bed Sheet 2 Box 1,350.00 160 Flat Cord, #18/2, Per Meter 27 Piece 880.20 161 Floor Mat, Linoleum 2 Piece 297.00 162 Flourescent Starter 1 Piece 20.30 163 Flourescent Tube 18 Watts Led 10 Piece 2,903.00 164 Flourescent Tube Led Straight, T8 18 Watts, 180-264 Volts, Daylight 3 Piece 2,025.00 165 Flourescent Tube, 40watts 2 Piece 268.80 166 Fluorescent Tube, Led, T8 14 Piece 4,663.40 167 Fly Paper 140 Piece 6,090.00 168 Folder, Pressboard, Long, 100sheets/box 5 Box 13,500.00 169 Folder, Pressobard, Long, 100sheets/box 2 Box 5,400.00 170 Folder, Tagboard, A4 10 Piece 75.00 171 Folder, Tagboard, Long 11 Piece 89.10 172 Folder, Tagboard, Long, 100pcs/pack 1 Pack 810.00 173 Folder, Tagboard, Short 1 Piece 6.10 174 Furniture Cleaner, With Cleansing Conditioner, 330ml/can 8 Can 3,281.60 175 Gauze/bandage, 4x4, 5's/pack 100 Pack 7,088.00 176 Glass Cleaner, With Sprayer, 350ml/bottle 3 Bottle 511.20 177 Glass Cleaner, With Sprayer, 500ml/bottle 3 Bottle 648.00 178 Glue Stick, 4s/pack 5 Pack 439.00 179 Glue, All Purpose, 130g/jar 17 Jar 1,331.10 180 Glue, All Purpose, 240g/jar 10 Jar 1,688.00 181 Goggles Heavy Duty 3 Piece 3,645.00 182 Gun Tacker Wire, T50, 1250pcs/box 2 Box 432.00 183 Hammer 1 Pair 471.20 184 Hand Gloves, Cloth 6 Pair 307.80 185 Hand Gloves, Leather 4 Pair 737.20 186 Hand Gloves, Rubber 1 Pair 205.90 187 Hand Gloves, Surgical 100s/box 8 Piece 3,456.00 188 Hand Gloves, Surgical 100's/box 20 Box 8,640.00 189 Hand Gloves,orange Rubber Gloves Construction, Heavy Duty Cotton 6 Pair 648.00 190 Hand Sanitizer, 200ml/bottle 5 Bottle 1,282.50 191 Hydrogen Peroxide, 1l 10 Bottle 5,703.00 192 Ice Box Chest 15 Liters 1 Piece 1,863.00 193 Ice Box Chest 30 Liters 2 Piece 5,022.00 194 Insecticide Spray, 500ml/can 21 Can 10,699.50 195 Keyboard Mouse Pack, Wired, Usb Connection 2 Pack 2,362.60 196 Keyboard, With Numpad, Wired, Usb Connection 2 Piece 1,134.00 197 Kitchen Knife 3 Piece 607.50 198 Laminating Film, A4, 222x286mm X 125microns/box 10 Box 7,594.00 199 Led Head Lamp 2 Piece 486.00 200 Liquid Sosa, 500ml/bottle 14 Bottle 2,154.60 201 Long Nose Plier 1 Piece 1,080.00 202 Lpg Refill 9 Piece 10,935.00 203 Manila Paper, 24sheets/roll 5 Roll 877.50 204 Marker Ink Refill, Permanent, 20ml/bottle, Black 10 Bottle 1,080.00 205 Marker, Permanent, Broad Tip, Black 32 Piece 1,600.00 206 Marker, Permanent, Broad Tip, Blue 5 Piece 250.00 207 Marker, Permanent, Broad Tip, Red 5 Piece 250.00 208 Marker, Permanent, Fine Tip, 12pcs/box, Black 10 Box 5,994.00 209 Marker, Permanent, Fine Tip, 12pcs/box, Blue 1 Box 599.40 210 Marker, Permanent, Fine Tip, 12pcs/box, Red 1 Box 599.40 211 Marker, Permanent, Fine Tip, Black 33 Piece 1,650.00 212 Marker, Whiteboard, Broad Tip, Black 6 Piece 486.00 213 Marker, Whiteboard, Fine Tip, Black 5 Piece 405.00 214 Marker, Whiteboard, Fine Tip, Red 2 Piece 162.00 215 Measuring Tape, 30m 1 Unit 741.20 216 Measuring Tape, 5m 1 Piece 309.20 217 Monobloc Chair With Back Rest, Without Arm Rest 10 Piece 5,751.00 218 Monobloc Chair, High Stool, 28" 30 Piece 16,530.00 219 Mop Handle, Plastic Handle, Plastic Frame, Heavy Duty, 5ft 7 Piece 3,283.00 220 Mop Handle, Wooden Handle, Metal Frame, 5ft 5 Piece 1,539.00 221 Mop Refill, Tornado 7 Piece 1,498.00 222 Mop Squeezer, Tornado 1 Set 2,211.30 223 Mophead, Cotton, 500g 19 Piece 2,644.80 224 Mophead, Cotton, 600g 5 Piece 812.50 225 Moth Balls 5 Piece 108.00 226 Mouse Pad, Basic 5 Piece 270.00 227 Mouse, Optical, Wired, Usb Connection 13 Piece 3,949.40 228 Muriatic Acid, 1gallon/bottle 2 Bottle 675.00 229 Muriatic Acid, 1l/bottle 1 Bottle 144.50 230 Muriatic Acid, 500ml/bottle 25 Bottle 1,620.00 231 Note Pad, Stick On, 2" X 3", 100sheets/pad 14 Pad 714.00 232 Note Pad, Stick On, 3" X 3", 100sheets/pad 44 Pad 3,181.20 233 Note Pad, Stick On, 3" X 4", 100sheets/pad 27 Pad 2,662.20 234 Note Pad, Stick On, 3" X 5", 100sheets/pad 9 Pad 1,020.60 235 Notebook, Spiral, 80 Leaves 4 Piece 140.40 236 Office Jacket 11 Piece 16,632.00 237 Official Record Book, 8.5x11, Hard Bound, 300 Pages 10 Piece 2,582.00 238 Official Record Book, 8.5x11, Hard Bound, 500 Pages 10 Piece 2,869.00 239 Oxygen Tank Refill 40 Cylinder 42,120.00 240 Pad Paper, Yellow Pad, 80leaves/pad 5 Pad 405.00 241 Pail, Plastic, 16liters 4 Piece 1,390.80 242 Pail, Plastic, 20liters W/ Cover 4 Piece 3,088.80 243 Paint, 1gallon 1 Piece 1,154.30 244 Paper Clip, Plastic Coated, 33mm, 50g/box 1 Box 20.30 245 Paper Clip, Plastic Coated, 50mm, 50g/box 3 Box 113.40 246 Paper Fastener, Metal, 50s/box 24 Box 2,268.00 247 Paper Fastener, Plastic, 50s/box 25 Box 1,520.00 248 Paper Towel, Jumbo Roll, 2ply 4 Roll 1,042.40 249 Paper/document Tray, 3 Layers, Plastic Base, Metal Rod Frame 4 Piece 4,309.20 250 Pencil Sharpener, Manual, Sigle Cutter Head 2 Piece 931.60 251 Pencil, Lead #1, 12s/box 2 Box 222.20 252 Pencil, Lead #2, 12s/box 19 Box 2,110.90 253 Photo Paper, A4, 230g, Glossy, 20s/pack 6 Pack 810.00 254 Plaque 15 Piece 15,000.00 255 Plastic Bag, Clear, 100s, 8x10 25 Piece 557.50 256 Plastic Bag, Sando, Large 19 Piece 4,425.10 257 Plastic Bag, Sando, Medium 16 Piece 1,804.80 258 Plastic Bag, Sando, Small 6 Piece 376.80 259 Plastic Bag, Sando, Xl 14 Piece 4,158.00 260 Plier Set Tool Kit Heavy Duty (mechanical, Wire And Long Nose) 2 Pack 6,966.00 261 Plier, Long Nose, 8" 2 Piece 638.00 262 Post Screw, 2" 100 Pack 1,350.00 263 Povidone Iodine, 1l 5 Piece 4,644.00 264 Printer Ink Cartridge, Canon 810, Black 4 Piece 5,832.00 265 Printer Ink Cartridge, Canon 811, Tri-color 2 Piece 3,847.60 266 Printer Ink Cartridge, Hp 680, Black 6 Piece 4,357.80 267 Printer Ink Cartridge, Hp 680, Tri-color 4 Piece 2,905.20 268 Printer Ink Refill, Epson 003, 65ml/bottle, Black 87 Bottle 36,705.30 269 Printer Ink Refill, Epson 003, 65ml/bottle, Cyan 14 Bottle 5,906.60 270 Printer Ink Refill, Epson 003, 65ml/bottle, Magenta 14 Bottle 5,906.60 271 Printer Ink Refill, Epson 003, 65ml/bottle, Yellow 14 Bottle 5,906.60 272 Printer Ink Refill, Epson T6641, 70ml/bottle, Black 3 Bottle 1,265.70 273 Printer Ink Refill, Epson T6642, 70ml/bottle, Cyan 2 Bottle 843.80 274 Printer Ink Refill, Epson T6643, 70ml/bottle, Magenta 2 Bottle 843.80 275 Printer Ink Refill, Epson T6644, 70ml/bottle, Yellow 2 Bottle 843.80 276 Printer Ink Refill, Epson T6731, 70ml/bottle, Black 3 Bottle 2,025.00 277 Printer Ink Refill, Epson T6732, 70ml/bottle, Cyan 1 Bottle 675.00 278 Printer Ink Refill, Epson T6733, 70ml/bottle, Magenta 1 Bottle 675.00 279 Printer Ink Refill, Epson T6734, 70ml/bottle, Yellow 1 Bottle 675.00 280 Printer Ink Refill, Epson T6735, 70ml/bottle, Light Cyan 1 Bottle 675.00 281 Printer Ink Refill, Epson T6736, 70ml/bottle, Light Magenta 1 Bottle 675.00 282 Printer Ink Refill, Hp Gt52, 70ml/bottle, Black 1 Bottle 425.30 283 Printer Ink Refill, Universal Pigment, 1l/bottle, Black 3 Bottle 2,016.90 284 Printer Ink Refill, Universal Pigment, 1l/bottle, Cyan 1 Bottle 672.30 285 Printer Ink Refill, Universal Pigment, 1l/bottle, Magenta 1 Bottle 672.30 286 Printer Ink Refill, Universal Pigment, 1l/bottle, Yellow 1 Bottle 672.30 287 Puncher, Paper, Heavy Duty, Two Hole Guide 11 Piece 2,896.30 288 Push Brush, Wooden Handle 2 Piece 385.00 289 Push Pin, 100pcs/box 2 Box 86.40 290 Rag, Cotton, 8" 80 Piece 760.00 291 Rag, Cotton, 8", Per Kilo 9 Kilo 1,166.40 292 Rainboots 30 Piece 16,200.00 293 Rainboots, White 40 Piece 21,600.00 294 Raincoat, Butterfly 2 Piece 1,080.00 295 Raincoat, With Pants 3 Set 1,863.00 296 Record Book, Hard Bound, 150 Pages 20 Piece 1,486.00 297 Ribbon Cartridge, Epson C13s015632, Black, For Lx-310 20 Piece 3,240.00 298 Ribbon Cartridge, Epson S015327, Black, Fx-2175 And Fx-2190 5 Piece 2,329.00 299 Rubber Band, #14 1 Box 229.50 300 Rubber Band, #18 17 Box 6,104.70 301 Ruler, Hard Plastic, 12" 10 Piece 540.00 302 Ruler, Steel, 18" 1 Piece 148.50 303 Scissors, Multi-purpose, 6" 3 Pair 243.00 304 Scissors, Multi-purpose, 8" 17 Pair 1,836.00 305 Scouring Pad, 3pcs/pack 7 Pack 756.00 306 Scouring Pad, With Foam 9 Piece 466.20 307 Screw Driver, Flat Screw 1 Piece 141.40 308 Screw Driver, Philip Screw 1 Piece 141.40 309 Sign Pen, Gel Point, 0.5mm, Black 33 Piece 4,233.90 310 Sign Pen, Gel Point, 0.5mm, Blue 30 Piece 3,849.00 311 Sign Pen, Gel Point, 0.5mm, Green 20 Piece 2,566.00 312 Sign Pen, Gel Point, 1.0mm, Black 10 Piece 1,283.00 313 Sign Pen, Impact Gel, 1.0mm, Black 5 Piece 641.50 314 Soap, Hand Wash Liquid, 500ml/bottle 9 Bottle 2,259.90 315 Solid State Drive, Approx. 240gb, Sata 3 Piece 7,068.90 316 Specialty Paper, 220gsm, A4, 100sheets/bundle 1 Bundle 391.50 317 Specialty Paper, 220gsm, A4, 10sheets/pack 27 Pack 1,385.10 318 Specialty Paper, 220gsm, Long, 100sheets/bundle 1 Bundle 438.80 319 Sponge, Regular, With Scrub Pad 2 Piece 103.60 320 Sprayer Bottle 30 Piece 2,334.00 321 Squeegee, With Handle 2 Piece 512.40 322 Stamp Pad Ink, 30ml/bottle 2 Bottle 121.60 323 Stamp Pad, Big 5 Piece 459.00 324 Stamp, Self Inking, Customized, Big 4 Piece 6,117.20 325 Stamp, Self Inking, Customized, Small 5 Piece 5,493.00 326 Staple Remover, Twin Jaws 1 Piece 35.50 327 Staple Wire, #10, 1000pcs/box 5 Box 81.00 328 Staple Wire, #35, 5000pcs/box 27 Box 2,551.50 329 Stapler, #10, Small 5 Piece 749.50 330 Stapler, #35, Heavy Duty, With Staple Remover 19 Piece 10,260.00 331 Stapler, Heavy Duty Metal, 210sheets Capacity, Desktop 1 Unit 2,970.00 332 Steel Wool, 30g 16 Piece 1,036.80 333 Stethoscope 20 Piece 21,600.00 334 Stick On Notes, 1.3x4.3, 5 Colors X 25sheets/pack 20 Pack 642.00 335 Sticker Paper, A4, Matte, 10sheets/pack 12 Pack 972.00 336 Sticker Paper, Legal, Glossy, 10sheets/pack 3 Pack 243.00 337 Storage Box, Plastic, With Cover, 67 Liters 3 Piece 2,754.00 338 Strainer, Aluminum, Big 1 Piece 562.30 339 Tape Dispenser, Heavy Duty, 1", Desktop 1 Piece 172.80 340 Tape Dispenser, Heavy Duty, 2", Packaging 2 Piece 182.40 341 Tape, Double Sided, 1" 13 Roll 1,614.60 342 Tape, Duct, 2" 11 Roll 2,866.60 343 Tape, Masking, 1" 23 Roll 1,117.80 344 Tape, Packaging, 2" 24 Roll 1,588.80 345 Tissue Paper, 2ply, 12rolls/pack 85 Pack 20,009.00 346 Tissue Paper, 2ply, 9rolls/pack 7 Pack 1,249.50 347 Toilet Bowl And Urinal Cleaner, 900ml/bottle 23 Bottle 4,655.20 348 Toilet Bowl Brush, Metal Handle 6 Piece 550.80 349 Toilet Bowl Brush, Wooden Handle 2 Piece 175.60 350 Toilet Deodorant Cake, 100g 25 Piece 1,740.00 351 Toilet Deodorant Cake, 50g 100 Piece 3,970.00 352 Toilet Suction Pump, Rubber, Wooden Handle 2 Piece 280.80 353 Toner Cartridge, Hp 285a (85a), Black 2 Piece 13,486.60 354 Toner Cartridge, Hp 35a, Black 1 Piece 5,224.50 355 Top Glass, For Office Table 1 Piece 2,106.00 356 Towel, Hand 9" X 15" 11 Piece 415.80 357 Towel, Hand 9" X 15" 20 Unit 756.00 358 Trash Bag, Plastic, Large, 10pcs/pack 78 Pack 5,608.20 359 Trash Bag, Plastic, Medium, 10pcs/pack 64 Pack 3,129.60 360 Trash Bag, Plastic, Xlarge, 10pcs/pack 168 Pack 18,144.00 361 Trash Bag, Plastic, Xxlarge, 10pcs/pack 105 Pack 16,107.00 362 Trash Can, With Cover 5 Piece 1,066.50 363 Ultrasound Gel 10 Piece 13,500.00 364 Used Newspaper 60 Kg 6,090.00