Fiber Tenders
Fiber Tenders
DEPT OF THE ARMY USA Tender
United States
Closing Date13 May 2025
Tender AmountRefer Documents
Details: The United States Army Corps Of Engineers (usace), Transatlantic Middle East District (tam), Is Releasing The Following Presolicitation Notice For The Purpose Of Making Notification To The Public And To Solicit Responses For The Prequalification Of Sources. While All Attempts Have Been Made To Ensure The Accuracy Of The Information Presented Below, The Government Does Not Guarantee Its Accuracy, And Prior To Award, Reserves The Right To Make Any Changes To The Project As Deemed Necessary. this Notice Is For Construction Of The Fleet Maintenance Facility & Tactical Operations Center (p992) Project At Shaikh Isa Air Base In The Kingdom Of Bahrain. The P992 Project Is A Programmed Military Construction (milcon) Project. project Scope: The P992 Project Will Construct A Two-story, Steel-frame Fleet Maintenance Facility (fmf) Using Pre-engineered Metal Building (pemb) On A Concrete Slab Foundation And Structural Floor, Insulated Metal Roof Panels On Steel Purlins, Interior Prefabricated Metal Module Units, And Exterior Rf Shielding Membrane. The Facility Will Include Maintenance And Repair Areas, Personnel Support Areas And Storage. Its Function Is To Support Associated Asset Of P-8a Aircraft Housed In The Adjacent P-8a Hangar. Project Also Constructs A Single-story Tactical Operations Center (toc); The Facility Will Be Composed Of Pemb On A Concrete Slab Foundation. The Facility Will Include Administrative And Operational Areas. The Facility Will Consolidate Requirements Currently Housed In Multiple Relocatable Facilities As Well As Provide Operational Support To The P-8a Aircraft. this Project Alters Building #5070 (133.78 M2). Alterations Will Involve Minor Repair To No More Than 30% Of The Existing Gypsum Board Walls/ceilings And Painting Of All The Existing Gypsum Board Wall/ceiling Surfaces. information Systems Include Basic Telephone And Secure Telephone, Secure Computer Network, Fiber Optics, Cable Television, Security (ids/ess) And Fire Alarm Systems And Infrastructure. this Project Will Provide Anti-terrorism/force Protection (at/fp) Features And Comply With At/fp Regulations And Physical Security Mitigation In Accordance With Dod Minimum Anti- Terrorism Standards For Buildings. User Generated Unit Costs Were Used Were Used For This Project And Include The Cost Of Features To Meet The Minimum Dod At/fp Standards. built-in Equipment Includes 60 Hz And 400 Hz Power Converters And Systems, Power Filters, Emergency Back-up Power Generator At The Toc, Three Oversize Access Doors, Acu-902 Pod Cooler, Storage Rack Shelving And Raised Access Flooring. pavement Facilities Include Pads For Generators, Hvac Equipment And A Concrete Airfield Access Ramp Extension. Paving And Site Improvements Include Grading, Asphalt Road Repair, Security Fencing, Entry Control Points, And Concrete Paver Installation. site Preparation Includes Site Clearing Of Existing Structures, Underground Utility Relocations And Preparation For Construction. electric Utilities Include Site Lighting, Prime-rated Generators, Underground Electric Distribution Systems, Antenna Infrastructure, Telecommunications Infrastructure, Antenna Cable, And Relocation Of Existing Underground Electrical And Telecommunications Systems. Mechanical Utilities Include Storm Water Lines And Fire Water Supply Lines. The Project Includes Force Protection Barriers. this Project Contains A Secure Hotel Component And Will Require A U.s. Contractor With A Defense Counterintelligence And Security Agency Issued Active Facilities Clearance Listing (fcl) At The Secret Level Or Higher. magnitude Of Construction: The Magnitude Of Construction For This Project Is Estimated To Be Between $10,000,000.00 And $25,000,000.00. period Of Performance: The Estimated Overall Period Of Performance (pop) Is Five Hundred Ninety-nine (599) Calendar Days From Notice To Proceed (ntp) For The Entire Scope Of Work. location Of The Work: The Location Of The Project Is Shaikh Isa Air Base In The Kingdom Of Bahrain. tentative Milestone Dates: The Design-bid-build (d-b-b) Solicitation Is Scheduled For Release In May Of 2022. Offeror’s Proposals May Be Due 30 Days Following Release Of The Solicitation And Contract Award Is Estimated To Be In August Of 2022. project Classification: The Project Is Classified Through The North American Industry Classification System (naics) Under Code 236220 Commercial And Institutional Building Construction With A Small Business Size Of $39.5 Million. However, As This Requirement Will Be Performed Oconus, Small Business Set Asides Will Not Be Used. This Solicitation Will Be Advertised As A Full And Open Requirement Using Prequalification Of Sources. solicitation Documents: Solicitation Documents Will Only Be Provided To Offerors Who Have Responded To This Notice And Have Been Determined To Be Qualified In Accordance With This Notice. To Be Qualified, Interested Firms Must Have An Active Registration In Sam.gov And Possess A Facility Clearance Level (fcl) Of Secret Or Higher, Issued In Accordance With The National Industrial Security Program Operating Manual (nispom), Dod 5220.22-m By The Closing Of This Posting. If The Interested Firm Is A Joint Venture (jv), All Members Of The Jv And The Jv Itself Must Possess A Secret Fcl Or Higher At The Date And Time Of The Close Of This Posting. Any Interested Firm Must Provide A Response To This Pre-solicitation Notice Identifying Its Name, Physical Address, Email Address, And Commercial And Government Entity (cage) Code. A Copy Of The Offerors Fcl Must Be Provided. interested Offerors Are Required To Sign And Return The Attached Controlled Unclassified Non-disclosure Agreement (nda). Upon Government Receipt Of A Signed Nda And Verification Of A Firm's Sam Registration, Cage Code And Fcl, Specifications/drawings And Other Related Project Documents Will Be Released To Eligible Offerors By Secure Document Transfer Method, Such As Dod Safe Site. Paper Copies Of The Solicitation Will Not Be Issued, And Solicitation Documents Will Not Be Posted Publicly. Telephone And Fax Requests For This Solicitation Will Not Be Honored. Project Files Are Portable Document Format (pdf) Files And Can Be Viewed, Navigated, Or Printed Using Adobe Acrobat Reader. the Request For Proposal Will Only Be Released To Offerors Who Have Met The Prequalification Of Sources Requirment. interested Offerors Are Required To Respond To This Notice By Submitting A Copy Of Their Active Fcl And Nda Documents And Emailing Them To Sam Cornwell At Samuel.i.cornwell@usace.army.mil And Jesse Hobbs At Jesse.a.hobbs@usace.army.mil No Later Than 13 May, 2022 By 4:00 Pm Eastern Daylight Time. be Advised That This Is A Presolicitation Notice Only And Is Not A Solicitation. This Notice Does Not Restrict The Government From Utilizing A Different Acquisition Approach Or Making Any Changes To The Project Scope Or Terms, Or To Award Some, All, Or No Resultant Contracts. The Government Will Not Reimburse Respondents For Any Costs Incurred In Preparation Of A Response To This Notice. If You Have Any Questions, Please Email Both Sam Cornwell At Samuel.i.cornwell@usace.army.mil And Jesse Hobbs At Jesse.a.hobbs@usace.army.mil.
Nueva Ecija University Of Science And Technology - NEUST Tender
Electrical Goods and Equipments...+1Electrical and Electronics
Philippines
Closing Soon3 Jan 2025
Tender AmountPHP 27 Million (USD 466.2 K)
Details: Description Invitation To Bid The Nueva Ecija University Of Science And Technology (neust) Through The Bids And Awards Committee (bac), Hereby Invites All Interested Entities Registered With The Philippine Government Electronic Procurement System (philgeps) To Bid For The Hereunder Project, Subject To The General Conditions Stated Herein. Name Of Project: Supply, Delivery And Installation Of Hybrid And Electric Vehicles For Advanced Learning And Instruction In The Mechanical Engineering Program Location: College Of Engineering, Neust Sumacab Campus, Cabanatuan City Approved Budget For The Contract: Php27,017,500.00 Contract Duration: 120 Calendar Days Source Of Fund: Income Cost Of Bidding Documents: Php25,000.00 Project Description: 1lot Item No. Description Qty Unit 1 Car Train "hybrid And Electric Vehicles 1 Set Hybrid And Electric Vehicles Sybapro Experiment Trolley For Unit, 1070x1350x800mm With 5 Layer Hanging Base Cabinet Safety Zone Unit (hybrid And Electric Vehicles) Standard Group Lock Box For Lockout/tagout (with 1 Padlock) Composite Insulating Gloves, Class 0 Insulation Tester (1000v/2gω, Cat Iii 1000v, Cat Iv 600v) Charging Station For Pev And Phev Sideways Training Panel Frame Extension Two-pole Voltage Tester, 12-690v/ac/dc Cat Iii 690v, Cat Iv 600v Extended Safety Equipment For Diagnostics On Hv Vehicles Includes Safety Helmet, Face Shield, Balaclava, Insulating Stand Mat And Other Ppes Suited For The Experiment Fiber Pole For High Voltage Systems Protection Cover For Unit Experiment Trolleys Monitor Holder For Flat Screen Monitor Of Weight Up To 15kg/33lbs Hv Safety 2000 2 System 1 Set Car Train Interface With Virtual Instruments Car Train Experimenter Car Train Measurement Accessories, Shunts And Connection Cables Computer-based Training And Experimentation System Multimedia Combines Cognitive And Hands-on (haptic) Training Units Areas Of Basic And Advanced Electrical Engineering, Electronics And Automotive Technology Labsoft, An Open Experiment Delivery Platform Courses Teach The Theoretical Building Blocks And Provide Experiments Intelligent Measurement Interface Supplies Analog And Digital Measuring And Control I/o High Quality Item Of Laboratory Equipment With Virtual Instruments Vehicle Stabilization Systems - Abs, Esc And Tcs Course: Vehicle Stabilization Systems - Abs, Esc And Tcs Car Train Storage Case For Experiment Board Terms And Conditions: 1. Bidder Should Provide 1 To 2 Years Full Warranty On Parts And Labor 2. Delivery Period: 120 Calendar Days 3. Bidder Should Provide Continuous Free Training And Maintenance During Warranty Period. 4. Bidder Should Submit 100% Credit Line Certificate Equivalent To Approved Budget Ceiling 5. Bidder Should Perform The Site Inspection, Site Inspection Certificate Issued By The End User Shall Be Part Of The Eligibility Requirements 6. The Bidder Must Provide Instructional Manual, Brochures And Assembly Drawings Of Unit. 7. Provide Extra Consumables (wire, Connection Ports, Extra Sockets And Cables, Ferrules, Crimper, Wire Cutter) 8. Lifetime Software License. The Summary Of The Bidding Activities Is As Follows: Activities Schedule 1. Advertisement December 11-18, 2024 2. Issuance Of Bid Documents December 19, 2024 To January 3, 2025 3. Pre-bid Conference December 19, 2024, 2:30pm (via Zoom) 4. Deadline For Submission Of Bids (manual Submission) January 3, 2025, Until 5:00pm Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City 5. Opening Of Bids (face To Face) January 6, 2025, 9:00am Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City General Conditions: All Particulars To The Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulations. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Business Organizations With At Least Sixty Percent (60%) Interest Or Ownership Of At Least 60% Of The Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Business Organizations Of A Country Where The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From December 19, 2024 To January 3, 2025 Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Pay The Applicable Fee For The Bidding Documents Not Later Than The Deadline For Submission Of Bids. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 3, 2025, Until 5:00pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Pbd. Late Bids Shall Not Be Accepted. On The Last Day For The Submission Of Bids And No Prospective Bidder/s Submitted Its Bid Documents Or Only One (1) Bid Was Submitted For The Above-mentioned Project, The Same Is Deemed Extended Until January 10, 2025, 5:00 Pm. This Is To Protect The Interest Of The University And Full Opportunity For A Competitive Bidding May Be Achieved. The University Likewise Reserves The Right To Cause Extension Or Postponement Of The Filing Of Bids Should Similar Situation Arises. Bid Opening Shall Be On January 6, 2025, 9:00 Am At The Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City Unless Extended. Bids Will Be Opened In The Presence Of The Bidder Or His/her/its Duly Authorized Representative/s. Failure To Attend During The Opening Of Bids Shall Be Considered A Waiver On The Part Of The Bidder Who Likewise Waives His/her/its Right To Raise Questions During The Bidding Procedures. The Nueva Ecija University Of Science And Technology Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For More Information Concerning This Bidding, Please Contact The Following: Engr. Joel G. De Mesa Head, Bac Secretariat For Goods And Services Neust Gen. Tinio St., Cabanatuan City Email Address: Neust.bacsec@gmail.com Approved By: Dr. Honorato P. Panahon (sgd.) Bac Chairperson
Oriental Mindoro Tender
Civil And Construction...+1Building Construction
Philippines
Closing Soon6 Jan 2025
Tender AmountPHP 3.4 Million (USD 60.3 K)
Details: Description Invitation To Bid For Construction Of Two Storey Multi-purpose Building At Batuhan, Pola, Oriental Mindoro 1. The Provincial Government Of Oriental Mindoro (pgom), Through The Sb No. 3 - 20% Df 2024 Intends To Apply The Sum Of Three Million Four Hundred Ninety Eight Thousand Nine Hundred Ninety Three Pesos And 67/100 (php 3,498,993.67) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “construction Of Two Storey Multi-purpose Building At Batuhan, Pola, Oriental Mindoro (ib No. Cw-2024-270)”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro (pgom) Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 115 Calendar Days. Bidders Should Have A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Description Qty/unit B.3 B.5 800(1) 803(1)a 804(1)b 804(4) 900(1)c2 900(1)c3 900(1)c4 900(1)c5 900(1)c6 902(1)a 903(2) 1046 (2) A1 1004(2) 1008(2) 1010(2)a 1010(2)b Spl 1003(1)a1 1018(5) 1018(2) 1027 (1) 1051(6) 1003(3) Spl-i 1005(6) 1032(1)a 1032(1)b 1032 (1) С 1032 (2) 1013(2)a2 & 1013(2)b1 1014(1)b2 1047(2)a 1047 (2) B 1047(10) 1001(10) & 1002(24) 1002(4) 1001(11) 1001(6) 1100 (10) 1101(33) 1102 (1) 1103(1) & 1200(1) Permits And Clearances Project Billboard/ Sign Board Clearing And Grubbing Structure Excavation (common Soil) Embankment From Borrow Gravel Fill Structural Concrete (footing And Slab On Fill), Class A, 28 Days Structural Concrete (footing Tie Beam), Class A, 28 Days Structural Concrete (column), Class A, 28 Days Structural Concrete (suspended Slab), Class A, 28 Days Structural Concrete (beams/girders), Class A, 28 Days Reinforcing Steel (deformed), Grade 40 Formworks And Falseworks 100mm Chb Non-load Bearing (including Reinforcing Steel) Finishing Hardwares Aluminum Glass Windows Wooden Door (flush Door) Wooden Panel Door Aluminum Doors 4.5mm Fiber Cement Board Ceiling On Metal Frame Ceiling Glazed Tiles Unglazed Tiles Cement Plaster Finish Railings Cabinets Fabricated Stainless Signage Window Accessory Painting Works, Masonry, Concrete & Ceiling Painting Works, (wood Painting) Painting Works, Steel Varnishing Works Fabricated Metal Roofing Accessory Prepainted Metal Sheets, Long Span, Above 0.427mm, Rib Type Structural Steel, Trusses Structural Steel Purlins Metal Structure Accessories Pipes With Fittings Connection & Cold Water Lines Plumbing Fixtures Septic Vault (concrete/chb) Catch Basin Conduit, Boxes, And Fittings (conduit Works/conduit Rough-in) Wires And Wiring Devices Panelboard With Main & Branch Breakers Lighting Fixtures And Lamps & Ventilating Equipment 1 L.s. 1.00 Ea 77.28 M2 80.94 M3 19.86 M3 6.26 M3 18.82 M3 3.68 M3 10.59 M3 9.23 M3 14.20 M3 8,910.25 Kg 410.81 M2 342.31 M2 1.00 I.s 1.00 I.s. 5.04 M2 5.67 M2 1.00 I.s. 112.00 M2 146.57 M2 41.47 M2 582.62 M2 1.00 I.s 3.90 Sq.m. 1.00 L.s. 1.00 I.s. 694.62 M2 50.40 M2 114.16 M2 11.34 M2 95.80 M 77.51 M2 892.89 Kg 515.28 Kg 1.00 I.s 1.00 I.s 1.00 I.s. 1.00 L.s. 1.00 I.s. 1.00 I.s. 1.00 I.s. 1.00 I.s. 1.00 I.s. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Bids And Awards Committee Of The Pgom And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. Of Mondays To Fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 23, 2024 To January 06, 2024 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Pgom Will Hold A Pre-bid Conference On December 23, 2024 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before January 06, 2024 At 8:30 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On January 06, 2024 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Activity. 10. The Pgom Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Engr. Jollie Ver E. Lasic Head, Bac Secretariat Pgo – Procurement Division Provincial Capitol Complex Camimil, Calapan City, Oriental Mindoro (december 23, 2024) Atty. Earl Ligorio R. Turano Ii Bac Chairperson
Municipality Of Pintuyan, Southern Leyte Tender
Automobiles and Auto Parts
Philippines
Closing Soon7 Jan 2025
Tender AmountPHP 17.8 Million (USD 307.1 K)
Details: Description Item No. Item And Descriptions Quantity Unit 1 Lot Of Mobile Command And Control Vehicle (moccov) With Triage Technology Specifications: Trailer; 1 Set Trailer Dimension: L 16’ft X 6’8” Ft Trailer 40 Sq.m. Covered Area, Command Center Tent Maximum Capacity: 18 Persons Capacity: 10,000 Lbs. Multi-use Compartment For Rescue Equipment Swing Out Sink Rear/kitchen Top Tailgate Water Tank Gauge Indicator Automatic Water Pump For Faucet Reflectorized Trailer Side Markers Full Color Decal Suspension And Under Chassis Details: Round Axle With Hubs And Heavy-duty Bearings Rear Stabilizer Swivel Legs Front Stabilizer Swivel Legs Tandem Wheel And Fender With Spare Tires Front Swing/swivel Hand Jack With Tire Electromagnetic Brake System Swing Out Rear Tail Gate Dust And Waterproof Pvc Travel Cover Tent System; 1 Set Material: Wax Poly Cotton Canvas Fabric Annex 1: Mission Room Convertible To Bedroom Annex 2: Kitchen And Pantry Room Annex 3: Mission Room Annex Walls, With Extra-large Mesh Screens, Roll Down Window Cover, Poles, Pegs And Guy Ropes All Made With Heavy Duty Materials Maximum Capacity: 18 Persons Annex Walls With Extra-large Mesh Screens, Roll Down Window Cover, Poles, Pegs And Guy Ropes All In Heavy Duty Material Tent Material Is Water Repellent 3-season Tent That Can Withstand A Wind Force Of 7.5 Mph Baseline With Approximately 38 Mph Winds And Gusts Trailer Utilities; 1 Set Trailer Built-ins 150 Liters Water Tank Pump And Plumbing System Ac And Dc Power Inlet Mounted And Wash Basin Dust And Waterproof Pvc Travel Cover Portable Air-conditioning Unit Horsepower: 1 Hp Weight: 29 Kg Dimensions: 36.5 × 44.5 × 71.5 Cm Cooling Capacity: 12,600 Kj/h Power Consumption: 1100 W Applicable Area: 18-28 M 3 Units Independent Portable Toilet Material: Pp, Abs Dimension:35x42x43cm / 13.8×16.5×17" Capacity: 24l Flush Method: Press Compact Size And Lightweight Design Also Fit For Outdoor 1 Unit Toilet/shower Tent Material: Waterproof Cloth Rod: Glass Fiber Pop-up Dimension: 1.2x1.2x1.8 M With 1unit Portable Camping Shower, Rechargeable 2 Units Fuel Tank Standard: As/nzs 2906:2001 Capacity: 20l Of Fluid Spill Proof Vented Pouring Spout. Material: Uv Stabilized High Density Polyethylene 4 Units Fire Extinguisher 5lb Abc Non-toxic And Non-corrosive Chemicals Refillable Mono Ammonium Phosphate Chemical, Non-conductor, Non-toxic, Stored Pressure Equipped With Pressure Gauge, Brass Valve And Heavy-duty Air Hose With Nozzle 1 Unit Communication And Surveillance Pneumatic Mast Operation: Arc Movement + Vertical Movement Height: 10m Pan Movement: 360°gross Weight: 50 Kg Operation Platform: Arc Movement Horizontal And Vertical Rotation Speed: 6r/min Wind Resistance: 66km/h Control Way: Rs485, Pelco-d/p Agreement, Remote Control Material: Aluminum Alloy Power Supply: Dc12v-10a 1 Unit Wireless Siren Voltage: Dc 12v Output Power: 200w Siren And Microphone 1 Set Weather Station System Measurements: Hygrometer//humidity, Rainfall, Temperature, Wind Direction, Wind Speed Sensors: Anemometer, Rain & Temperature Solar-powered With Stored Energy Backup. Corrosion-proof And Can Withstand Extreme Weather Environments Has Wireless Transmission Range Of 1000 Ft. (300 M) Transmits Data Every 2.5 Seconds 1 Set Rescue Quadcopter Drone Waterproof Extended Flight Time Up To 20 Minutes Power-flip Function When Floating Flight Control Feel Tuned For Lifesaving As Well As Search And Rescue Operations 2.7k Color Camera, Remote Control Specially Designed Rescue Buoyancy Sausage Live As Well As Recorded Video Footage Payloads Up To 1.2kg 1 Set Satellite Internet Starlink; Standard Roaming Account (subscription Not Included) 1 Unit Uhf/vhf Radio Communication System Frequency Range 136-174 Mhz Or 450-520 Mhz Number Of Channels Max. 32 Channel Spacing Analog 12.5 Khz Digital 6.25 Khz Operating Voltage 13.6 V Dc ± 15% Frequency Stability ± 2.0 Ppm ± 1.0 Ppm Antenna Impedance 50 Ω Weight: 1.10 Kg 1 Set Management Laptop Intel Core I5 Ram 8gb Display: 15.6 Inches (main Display) Windows 10/11 Home/webcam/bt/wifi/cardreader/backlit Keyboard 1 Set Led Robotic Search Light Lighting Mode: Low Light, High Light, And Flashing Image Resolution: 1280 × 720 Max. Rotation Range Yaw: - 70° To + 70°, Pitch: - 135° To 45° Power Consumption: ≤ 40 W 1 Unit Ptz Perimeter Camera System Pan, Tilt, Zoom 1/2.8" Hd Progressive Scan Cmos 1920 × 1080 Resolution 25× Optical Zoom 120 Db True Wdr (wide Dynamic Range) Up To 100 M Ir Distance 3d Intelligent Positioning Switchable Tvi/ahd/cvi/cvbs Video Output 1 Unit Bullet Camera System Image Sensor 1/3" Progressive Scan Cmos Min. Illumination Color: 0.01 Lux @ (f1.2, Agc On), 0.018 Lux @ (f1.6, Agc On), 0 Lux With Ir Day & Night Ir Cut Filter Angle Adjustment: Pan: 0° To 360°, Tilt: 0° To 100°, Rotate: 0° To 360° Max. Resolution: 2688 × 1520 4 Units Cctv Nvr 8 Channel (ds-7208huhi-k1/e) Digital Video Recorder Mouse, Manual And Power Cord Remote Viewing Anytime, Anywhere Live View From Pc, Smartphone Or Tablet Turbo Hd Camera Ultra-low Light Chromatic Night Vision 1 Set Console Box Heavy Duty Case For Cctv System And Media System Laminated Water Resistant, 1 Unit All In One Pc, 2 Units 22inch Multimedia Tv With Tv Box, 1 Unit 32-inch Smart Tv, 7inch Am/fm Audio Receiver With Speakers, Wireless Keyboard And Mouse 1 Unit Step Ladder 3 Step Foldable Aluminums Ladder 1 Unit Table For Mapping Folding Half Table With Foldable Steel Legs 4ft 122 X 60 X 74cm 1 Unit White Board Magnetic White Board 30cm X 60cm 1 Unit Rescue And Triaging Foldable Rescue Boat With Outboard Motor Width (beam) When Open: 60″ 1.52mdraft: 4″ 11.4cmdepth Mid-ship: 24″ 56cmcapacity: 807 Lbs. Number Of Seats: 6material: Hard Plastic 1 Set Water Rescue Equipment. 2 Rescue Helmet, 4 D Shape Carabineer, 4 Oval Shape Carabineer, 2pairs Glove, 2 Rescue Vest, 1 Rescue Can, 1 Half Body Harness, 1 50meters 12mm Rope, 2pcs Waterproof Headlamp, 1 Carry Bag 1 Set High Angle Rescue Equipment. 2 Rescue Helmet, 4 D Shape Carabineer, 4 Oval Shape Carabineer, 2pairs Glove, 1 Half Body Harness, 1 50meters 12mm Rope, 2pcs Waterproof Headlamp, 1 Carry Bag, 1 Swing Spinner Carabiner,1 Hand Ascender Device, 1 Adjustable Foot Loop Sling, 1 Descender Rescue 8, 1 Pulley Single Sheeve, 1 Pulley Double Sheave 1 Set Automated External Defibrillator Protocol: Semiautomatic And Fully Automatic Configuration Defibrillator Charge Hold Time: 30 Seconds. Aed 3 Automatic Model: 3 Seconds Prior To Automatic Shock Delivery Energy Selection: Factory Pre-programmed Selection Patient Safety: All Patient Connections Are Electrically Isolated Size: (h X W X D) 12.7 Cm X 23.6 Cm X 24.7 Cm. 5.0 In X 9.3 In X 9.7 In Weight: 2.5 Kg; 5.5 Lbs. (with Battery) 1 Unit Emergency And Trauma Bag. 1 Btl Alcohol 150ml 1 Btl Betasol Povidone 60ml 1 Btl Hydrogen Peroxide 60ml 1pc. Tourniquet 1 Set Oxygen Tank W/ Regulator 1 Pc. Emergency Blanket 1 Pc. Arm Splint / Sam Splint 1 Pc. Leucoplast ½ 1pc. Cpr Mask Surgi-tech 1 Pc. Cervical Collar 1 Pc. Triangular Bandage 1 Pc. Hot And Cold Pack 160g Surgi-tech 1 Pc. Digital Thermometer Advan 1 Btl Dextrose Partners 1 Pc. Iv Tubing Surgi-tech 1 Pc. Iv Cath G.24 1 Pc. Cosmed Butterfly G.23 1 Pc. Pulse Oximeter 1 Set Ambu Bag Pvc 1 Pc. Pen Light Indoplas 1 Set Blood Pressure / Bp Set 1 Pc. Kelly Forceps Straight 1 Pc. Surgical Scissor Straight 1 Set Foldable Military Spec Medical Beds Material: High-grade Aluminum Foldable Product Size: 194 X 66 X 41cmfolded Size: 90 X 12 X 20cmweight: 9.5kgload Bearing: Less Than 159kg 5 Units Jack 3-ton Crocodile Jack 1 Unit Rescue Axe Gross Weight: 32oz Or 910g Length: 15" Or 38cm Carbon Steel Head Dual Fiberglass Handle Rubberized Grip 1 Unit Bolt Cutter Size: 12" Max. Cutting Size: 5mm Cr-v Blade 1 Unit Hi-lift Responder Jack Material: Cast Iron Steel Size: 42” Leverage: 4660 Lbs. 1 Unit Medical Stretcher Product Size (length*width*height): 214*54*13cm Foldable 1 Unit Shovel Full Length: 42cm Spade Width: 10cm Shovel Length: 12.5cm Pick Length: 11cm 1 Unit Power Supply And Electronics Jump Starter/power Bank Ce/rohs/emc Battery Capacity:15000mah Input: 14/a Output:5v/4a; 12v/12a; 19v/3.5a Charging Time: 5 Hours Start Current: 300a Peak Current: 600a 1 Unit Solar Power Generator System Rated Power: 200w Rated Voltage (vmp): 18v Rated Current (imp): 3.34a Open-circuit Voltage: 21.6v Short-circuit Current: 3.64a Number Of Cells: 36 Cell Type: Poly-crystalline Silicon Glass Type: High Transmission, Low Iron, Tempered Glass, Glass Thickness Of Glass: 3.2mm 1 Set Wind Power Generator System - Material: Nylon Fiber - Blade Length:600mm - Wind Wheel Diameter:900mm - Weight:12.5kg - Rated Power: 400w - Starting Wind-speed: 12m/s - Rated Voltage: 12/24vr 1 Unit Generator Set Power Inlet Mounted220-240vopen Type Generator Starting System: Recoil/electrical Starting Alternator Material: 100% Cu Frequency (hz): 60voltage(v): 120-240rated Output (kw): 8max Output (kw): 8thd (%): 25running Time At 50% Loading(h): 8.5fuel Tank Size(l): 21noise Db(a): 97insulation Grade: F 1 Unit 220v Backup Inverter Power System 3000 Watts Power Inverter Dc Charging System Output Voltage: 220v (+-) 10% Output Frequency: 60hz (+-) 2 Output Wave Form: Modified Sine Wave Peak Efficiency: 65% 1 Unit Battery Bank Power Supply 100ah X 4 (total Capacity= 400ah) Lithium Ion Battery 1 Unit Training - Seminar Technical Seminar Training For Ingress And Digress Of Trailer-tent System Gain Knowledge Of Equipment And Its Specifications Proper Handling And Proper Use Of Tools And Equipment's Ergonomic Placement Of Equipment Individual Seminar Training And Testing Of Each Individual For A Specific Role Ex: Basic Drone Pilot Training, Cctv Controller Etc. Note: Caap Certification Not Included Team Seminar Conducting Team For Ground Training And Actual Response Action Efficient Ingress And Digress Of Mocov Synchronization Of Individual And Their Roles At A Specific Time Of Action Tool Set 82 Pcs Tool Set 1 Set Cook Set 6 Persons Cook Set 1 Set Portable Stove 2 Burner Portable Butane Stove 1 Unit Vehicle Modified 4x4 Xl Ford Ranger 2024 Or Its Equivalent Or Better Powertrain 4x4 Drivetrain 2.0l Turbo Diesel Maximum Power 170hp @ 3,500maximum Torque 405nm @ 1,750-2500 Rpm6-speed Manual Transmission Chassis & Suspension Front Suspension Double Wishbone With Coil Springs Rear Suspension Leaf Spring Front Ventilated Discs/rear Drum Wheels & Tires16" Off-road Mag-wheels 255 / 70r 16 Tires Accessories: Snorkel Led Bar Light, Roof Tray, Led Emergency Strobe Light Bar, Load Plus (suspension), Tow Hitch Set 1 Lot Notes: 1. All Items Should Be Supplied, Delivered And Installed On-site As Designated By The End-user Unit. 2. Mobile Command And Control Vehicle With Triage Technology And Its Accessories Should Be Accredited Or Recognized From Department Of Science And Technology (dost) Or Any Appropriate Government Agencies. 3. Vehicle Inclusions: Lto Registration – 3years, Ctpl-3years, Insurance With Aog – 1 Year, With Logo Of The Municipality (pintuyan). 4. Product Warranty Certificates For Vehicle. 5. Product Warranty Certificates For Equipment, Devices And Accessories Not Less Than One (1) Year. 6. Trainings For Operators Of All Equipment, Devices And Accessories And Corresponding Seminars For Conducting Team Shall Be Formed Part Of The Contract.
Municipality Of Conner, Apayao Tender
Civil And Construction...+1Building Construction
Philippines
Closing Date17 Jan 2025
Tender AmountPHP 24.7 Million (USD 427 K)
Details: Description Republic Of The Philippines Province Of Apayao Municipality Of Conner Local Government Unit Invitation To Bid For; Project Title: Construction Of One (1) Unit Warehouse In Conner, Apayao Location: Paddaoan, Conner, Apayao Project Id: 24mgu-infra-048 The Local Government Unit Of Conner, Apayao, Through The Da-rfo-car Intends To Apply The Sum Of Twenty-four Million Seven Hundred Fifty Thousand Pesos Only (24,750,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of One (1) Unit Warehouse In Conner, Apayao Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Conner, Apayao Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 907 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 3. Interested Bidders May Obtain Further Information From Local Government Unit Of Conner, Apayao And Inspect The Bidding Documents At The Address Given Below From Civil Registrar Office 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders At The Office Of The Municipal Civil Registrar On December 27, 2024. {insert If Necessary: And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of P 25,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 5. The Local Government Unit Of Conner, Apayao Will Hold A Pre-bid Conference On January 3, 2025 @ 10:00 Am At The Lgu-premises, Caglayan, Conner, Apayao Which Shall Be Open To Prospective Bidders. 6. Bids Must Be Duly Received By The Bac Secretariat In Person At The Office Of Civil Registrar Office On Or Before January 17, 2025 @ 9:00 Am (i) Manual Submission At The Office Address As Indicated Above. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 8. Bid Opening Shall Be On January 17, 2025 @ 9:30 Am At The Given Address Below Lgu-premises, Caglayan, Conner, Apayao. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Local Government Unit Of Conner, Apayao Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. Scope Of Work Item No. Description Unit Quantity A.1.1(6) Provision Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer (rental Basis) Month 30 A.1.2(2) Provision Of 4x4 Pick Up Type Service Vehicle For The Engineer On Bare Rental Basis Month 30 A.1.1(11) Provision Of Furniture/fixtures Equipment And Appliances For The Field Office For The Engineer Lumpsum 1.00 B.3 Permit And Clearances Lumpsum 1.00 B.5 Project Billboard/signboard Each 1.00 B.7(2) Occupational Safety And Health Lumpsum 1.00 B.9 Mobilization/demobilization Lumpsum 1.00 B.16 Recognition Plate/project Marker Each 1.00 102(2) Surplus Common Excavation Cu.m. 3,000.00 803(1)a Structural Excavation (common Soil) Cu.m. 1,077.68 804(1)b Embankment From Borrow Cu.m. 218.40 804(4) Gravel Fill Cu.m. 88.09 311(1)e1 Portland Cement Concrete Pavement (280mm Thk.) Cu.m. 398.11 900(1)c2 Structural Concrete (footing And Slab On Fill), Class A, 28 Days Cu.m. 252.88 900(1)c4 Structural Concrete (column), Class A, 28 Days Cu.m. 115.45 900(1)c6 Structural Concrete (beams/girders), Class A, 28 Days Cu.m. 72.60 902(1)a Reinforcing Steel (deformed), Grade 40 Kgs. 45,065.92 903(2) Formworks And Falseworks Sq.m. 1,102.50 1000(1) Soil Poisoning Ltr. 177.48 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel), 100mm Sq.m. 381.28 1046(2)a2 150mm Chb Non-load Bearing (including Reinforcing Steel) Sq.m. 410.26 1047(8) Structural Steel (roof Framing) Bdft. 1,245.83 1014(1)b2 Prepainted Metal Sheets (rib Type, Long Span, Above 0.50mm) M 1,245.83 1013(2)a2 Fabricated Metal Roofing Accessory (flashings, Gauge 26)) M 157.80 1013(2)b1 Fabricated Metal Roofing Accessory (gutters, Gauge 26) M 52.50 1010(2)a Door (flush) Sq.m. 61.68 1007(1)b Aluminum Framed Glass Door (swing) Sq.m. 21.29 1011(1)a Roll-up Door Lumpsum 1.00 1008(1)a Aluminum Glass Windows (sliding) Sq.m. 31.43 1008(1)c Aluminum Glass Windows (awning) Sq.m. 4.32 1008(1)d Aluminum Glass Windows (fix) Sq.m. 6.59 1027(1) Cement Plaster Finish Sq.m. 1,267.24 1018(5) Glazed Tiles Sq.m. 301.00 1018(2) Unglazed Tiles Sq.m. 48.00 1003(1)a1 Carpentry (4.5mm, Metal Frame, Fiber Cement Board) Sq.m. 484.07 1003(1)e2 Carpentry (metal Furring Frame, Pre-painted Metal Panel) Sq.m. 221.27 1032(1)a Painting Works Sq.m. 2,907.48 1051 (1) Railing Lumpsum 1.00 1001(8) Sewer Line Works Lumpsum 1.00 1001(9) Storm Drainage And Downspout Lumpsum 1.00 1002(6) Cold Waterline Works Lumpsum 1.00 1002(4) Plumbing Fixtures Lumpsum 1.00 1001(6) Catch Basin (concrete) Each 10.00 1001(11) Septic Vault Lumpsum 2.00 1100(10) Conduit, Boxes And Fittings (conduit Works/conduit Rough-in) Lumpsum 1.00 1101(33) Wires And Wiring Devices Lumpsum 1.00 1103(1) Lighting Fixtures And Lamps Lumpsum 1.00 1202(6)a1 Fire Extinguisher Lumpsum 7.00 1208(1) Fire Alarm System Lumpsum 1.00 13. For Further Information, Please Refer To: Edmundo B. Desiderio Jr, Ce. Bac Sec Head-infrastructure Office Of The Municipal Engineer Vivian B. Pacis Bac Chairman-infrastructure Office Of The Civil Registrar 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: [philgeps, Local Government Unit Of Conner, Apayao]
DEPT OF THE NAVY USA Tender
Civil And Construction...+1Building Construction
United States
Closing Date10 Jan 2025
Tender AmountRefer Documents
Details: The Work For This Project Includes The Construction (design-bid-build) Of A Guam Defense Radar System Command Center (cc), Power Generation Facility, Switchgear Building, Fuel Storage Facility, Entry Control Facility, And Associated Equipment. The Cc Will Include Functional Areas To Accommodate Personnel, Computing Equipment, User Interfaces, And Communications Needed For Planning, Controlling, And Directing Mission Activities. The Power Generation Facility Will Provide Power Via The Switchgear Facility For The Command Center And Associated Infrastructure With Fuel From The Storage Facility Consisting Of Above Ground Fuel Tanks, Fuel Off-loading Infrastructure, And Associated Containment. The Cc Facility And Power Generation Facility Will Be Designed For Risk Category Iv To Meet Site Specific Ground Motion And Seismic Requirements To Include Base Isolation. construction Scope And Methods That Will Be Required As Part Of This Project Include, But Are Not Limited To: demolition Of Existing Housing Units And The Associated Mitigation/disposal Of Asbestos, Lead Contaminated Materials, And Pesticide Contaminated Soil civil Site Work, Including Grading, Paving, And Retaining Walls concrete Construction Meeting The Requirements Of Icc-500 Storm Shelter And Including Coordination Of Cast-in-place, Tilt-up, And Precast Elements 150 Foot Galvanized Steel Antenna Tower And Associated Foundation seismic Isolation Bearings Requiring A Specialized Installation Procedure And Building Erection Sequence Involving Extensive Construction Shoring And Bracing protection Measures For Nonstructural Components, Including Flex Loops For Piping & Conduit To Accommodate Seismic Movement security Infrastructure Includes Real Property Features To Support The Installation Of Security System Level (ssl)-c And Integrated Electronic Security System (iess), Site Security Measures, Entry Control, And Material Procurement & Inspection Requirements facilities Will Be Designed To Provide Cyber Security Engineering And Validation control System Integration Requiring The Aggregation Of Multiple Control Systems, Including Building Controls, Fuel System Controls, And Utility Controls complex Schedule Due To The Nature Of The Concrete & Isolated Foundation Construction, Long Lead Times For Major Equipment Such As Tier 2 Emergency Generators And Mechanical Equipment, And Multiple Joint Occupancy Date (jod) Milestones In The Construction Schedule To Accommodate Work Of Other Contractors Outfitting Systems, Installing Equipment, And Integrating Controls electrical (lighting And Distribution), Fiber Optic And Telecommunications, Fire Protection, Sanitary Sewer, And Storm Drainage the Work Will Include Four (4) Pre-priced Options. Option 1 Is The Price For One Generator And Fuel Tank #2. Option 2 Is The Price For One Generator And Redundancy (b-side Electrical Feeders + B-side Transformer). Option 3 Is The Price For One Generator. Option 4 Is The Price For The Uninterruptible Power Supply In The Command Center. In Accordance With Far 52.217-7 Option For Increased Quantity – Separately Priced Line Item, The Government May Exercise The Options By Written Notice To The Contractor Within 365 Days Of Contract Award. the Magnitude Of This Project Is Estimated Between $250,000,000 And $500,000,000. The North American Industry Classification System (naics) Code Is 236220 And Average Annual Receipts Is $45.0 Million Over The Past Three Years. The Contract Completion Period Is Anticipated To Be 1,323 Calendar Days. a Sources Sought Notice (n62742gdscc) For This Procurement Was Posted On 16 March 2024 On The System For Award Management (sam) Website Https://www.sam.gov/, And A Market Survey Was Conducted That Included An Assessment Of Relevant Qualifications And Capabilities Of Potentially Qualified Firms. As A Result Of The Market Research Analysis, A Determination Was Made To Solicit This Procurement On An Unrestricted Basis Inviting Full And Open Competition. The Navfac Pacific Small Business Office Concurs With This Decision. this Is A Best-value, Trade Off Source Selection Procurement Requiring The Submission Of Both Non-price And Price Proposals. All Technical Factors, When Combined Are Of Equal Importance To Past Performance; And All Evaluation Factors Other Than Price, When Combined, Are Approximately Equal To Price. Proposals Submitted In Response To This Solicitation Shall Be In The English Language And In U.s. Dollars. contract Award Will Be Made To The Responsible Offeror Whose Offer, Conforming To The Solicitation, Is Determined To Be The Lowest Evaluated Price Of Proposals Meeting Or Exceeding The Acceptability Standards For Technical Factors. The Technical Factors Are As Follows: (1) Experience, (2) Small Business Utilization And Participation, (3) Safety, (4) Management Plan, And (5) Past Performance. For Evaluation Of Experience And Past Performance, A Relevant Construction Project Is Defined As: new Construction Of An Administrative, Office Or Communications Facility Approximately $80 Million Or More In Dollar Value And Completed Or Substantially Completed Within The Past Ten (10) Years From The Date Of Issuance Of The Solicitation. new Construction Of A Secure Space Conforming To The Requirements Of Icd-705 Approximately $10 Million Or More In Dollar Value And Completed Or Substantially Completed Within The Past Ten (10) Years From The Date Of The Issuance Of The Solicitation. new Construction Of Essential Facilities Located In Moderate To High Seismic Areas Approximately $80 Million Or More In Dollar Value And Completed Or Substantially Completed Within The Past Ten (10) Years From The Date Of The Issuance Of The Solicitation. the Request For Proposal (rfp) Will Be Available On Or Around 30 October 2024. Printed Copies Of The Rfp Will Not Be Issued. The Rfp, Including The Specifications And Drawings, Can Be Accessed Via The System For Award Management (sam) Website At Https://sam.gov/. Contractors Must Register At The Sam Website To Obtain Access To The Rfp. Registration Instructions Can Be Found On The Sam Website. Amendments Will Also Be Posted At Https://sam.gov/. It Is Highly Recommended That Firms Register On The Sam Website As This Will Be The Only Plan Holder’s List Available. It Is The Offeror’s Responsibility To Check The Sam Website Periodically For Any Amendments To The Solicitation. a One-time Pre-proposal Site Visit Has Been Scheduled For 11 December 2024, 9:00 A.m. Chamorro Standard Time (chst). The Pre-proposal Site Visit Is To Provide Offerors With An Opportunity To Familiarize Themselves With The Jobsite And Conditions To Be Encountered, And It Is Not For The Purpose Of Answering Questions. Offerors Interested In Attending The Site Visit Shall Submit The Following Forms: base Access Request – Contractor Memo (fill-in Information In Red). iii Log (complete In Accordance With The Attached “how To Fill Out The Iii Log” Instructions Located At The End Of This Document.) base Access Affidavit 2020 (completed For Each Visitor That Does Not Have Dbids Pass) foreign National Access Request Form contractor Policy Update Memo either A U.s. Passport Or Real Id Act Driver’s License/id the Completed Forms Shall Be Submitted To Dayna Matsumura, Contract Specialist, At Dayna.n.matsumura.civ@us.navy.mil On Or Before 14 November 2024, 2:00 P.m., Hawaii Standard Time (hst). Once Approved For Base Access, A Tracking Number Will Be Emailed To Attendees For Use When Obtaining Base Passes At The Visitor Control Center (northgate), Andersen Air Force Base. please Be Informed: The Visitor Control Center (northgate) Requires Sufficient Processing Time For Each Visitor. Consequently, If An Attendee Submits The Application Forms After The Specified Due Date And Time, The Attendee May Not Be Able To Attend The Site Visit. the Furnishing Of The Above Information, Including Your Social Security Number, Is Voluntary. However, Your Failure To Furnish All Or Part Of The Information Request May Result In The Government's Denial Of Access To The Jobsite. Any Of The Above Information Furnished By You And Protected Under The Privacy Act Shall Not Be Released Unless Permitted By Law And/or You Have Consented To Such Release. upon Receipt Of The Above Information, Our Office Will Submit A Letter To The Pass And Id Office Authorizing Your Entrance. on The Day Of The Visit, Attendees Shall Meet Promptly At The Pacific Regional Training Center (prtc) Gate And Bring Necessary Base Access Pass, The “iii Log” And “new Contractor Letter Memorandum” To The Site Visit. For Those That Do Not Have Dbids, Pick Up An Approved Day Pass From The Visitor’s Center (northgate). Attendees Shall Meet At The Visitor Control Center Overflow Parking Lot.
DEPT OF THE NAVY USA Tender
Civil And Construction...+1Others
United States
Closing Date29 Jan 2025
Tender AmountRefer Documents
Details: The Work For This Project Includes, But Is Not Limited To, The Construction Of A Multi-story Communications Center Facility To Support Naval Computer And Telecommunications Station Guam Operations. Special Features Include Sensitive Compartmented Information Facility Construction Work In Accordance With Icd/ics 705 And Demolition And Incidental Related Work. Secure Facility Construction Shall Be Performed By U.s. Companies Using U.s. Citizens. the Work Will Also Include Three (3) Pre-priced Options For The Construction Of Two (2) Single-story Warehouse Facilities, And Osp Fiber Line Sonet Ring. In Accordance With Far 52.217-7 Option For Increased Quantity – Separately Priced Line Item, The Government May Exercise The Options By Written Notice To The Contractor Within 365 Days Of Contract Award. the Magnitude Of This Project Is Estimated Between $250,000,000 And $500,000,000. The North American Industry Classification System (naics) Code Is 236220 And Average Annual Receipts Of $45 Million Over The Past Three Years. The Contract Completion Period Is Anticipated To Be 1,255 Calendar Days. a Sources Sought Notice (n62742sscomms) For This Procurement Was Posted On 22 August 2023 On The System For Award Management (sam) Website Https://www.sam.gov/, And A Market Survey Was Conducted That Included An Assessment Of Relevant Qualifications And Capabilities Of Potentially Qualified Firms. As A Result Of The Market Research Analysis, A Determination Was Made To Solicit This Procurement On An Unrestricted Basis Inviting Full And Open Competition. this Solicitation Will Utilize The Tradeoff Source Selection Process. All Technical Factors, When Combined, Are Considered Of Equal Importance To Past Performance. The Factors Are: Factor 1 – Experience, Factor 2 – Safety, Factor 3 – Small Business Utilization And Participation, Factor 4 – Past Performance, And Price. Contract Award Will Be Made To The Offeror Proposing The Best Value To The Government From A Non-price And Price Standpoint. Furthermore, A Relevant Construction Project Is Defined As A Construction Project That Includes At Least One Of The Following Individual Features: (1) Precision Cooling System. New Construction Of A Chiller Type Technology Cooling System Engineered Specifically For Data Center/electronic/it Networking Environments. Projects Submitted Which Reference Comfort Cooling Systems Which Are Engineered Primarily For The Intermittent Use Required To Maintain A Comfortable Environment For People In Facilities Will Not Be Considered. Projects Submitted To Demonstrate Precision Cooling System Will Only Be Considered If The Work Was Performed By The Specific Entity Proposed For The Precision Cooling System Under The Resultant Contract, As Identified In Block 1 Of Attachment A. (2) Uninterruptable Power Supply System. New Construction Of An Uninterruptible Power Supply (ups) System That Is 225 Kva Size Or More. Projects Submitted To Demonstrate Ups System Experience Will Only Be Considered If The Work Was Performed By The Specific Entity Proposed For The Ups System, As Identified In Block 1 Of Attachment A. (3) Clean Agent Fire Suppression System. New Construction Or Replacement Of A Clean Agent Fire Extinguishing System And Releasing System, Including All Mechanical, Controls And Electrical Components Necessary For A Complete And Operating Clean Agent Fire Suppression System. Projects Submitted To Demonstrate Clean Agent Fire Suppression System Experience Will Only Be Considered If The Work Was Performed By The Specific Entity Proposed For The Clean Agent Fire Suppression System, As Identified In Block 1 Of Attachment A. see Request For Proposal (rfp) Document 00 21 16. the Rfp, Including The Specifications And Drawings, Can Be Accessed By Approved Individuals Via The Sam Website At Https://sam.gov/. Approved Individuals Must Register At The Sam Website To Obtain Access To The Rfp. Registration Instructions Can Be Found On The Sam Website. Once Registered In Sam, Approved Individuals Must Request Explicit Access To View The Documents. An Email Will Be Forwarded Once The Contracting Office Has Approved Or Declined The Request. Approved Individuals May View And/or Download The Rfp Documents. Amendments Will Also Be Posted At Https://sam.gov/. It Is Highly Recommended That Firms Register On The Sam Website As This Will Be The Only Plan Holder’s List Available. It Is The Offeror’s Responsibility To Check The Sam Website Periodically For Any Amendments To The Solicitation. offerors Are Required To Be Registered In The Sam Database At Https://www.sam.gov At The Time Of Proposal Submission. see Document 00 21 16 For Pre-proposal Site Visit Information. This Site Visit Is To Provide Offerors With An Opportunity To Familiarize Themselves With The Jobsite And Conditions To Be Encountered And Is Not For The Purpose Of Answering Questions. Forms Submission To Ms. Merbby Corpuz At Merbbyjoyce.n.corpuz.civ@us.navy.mil On Or Before 31 October 2024, 2:00 P.m., Hawaii Standard Time (hst). (1) Current Dbids. If An Interested Attendee Has Current Dbids Credentials For The Specific Base Where The Project Is Located, Submit The Following: company Letter Template: One Letter Required Per Company. List Attendees In Alphabetical Order (by Last Name). Must Be Signed By A Person Authorized To Provide The Certification Required. request For Camera Pass Form: Applicable Only For Those With Dbids Credentials Who Will Be Taking Photos. One Letter Required Per Company. Dbids Number Is Required On The Form. Once Properly Submitted To The Poc In Subparagraph (c) Above And Once Approved, You Will Receive A Routing Number From The Poc. An Appointment With The Naval Base Guam (nbg) Visitor’s Control Center (vcc) Is Required To Complete The Processing Of Your Camera Pass. (2) Current Dbids Not For The Specific Base Where The Project Is Located. Submit The Following: company Letterhead Template: One Letter Required Per Company. List Attendees In Alphabetical Order (by Last Name). Must Be Signed By A Person Authorized To Provide The Certification Required. dbids Base Access Request Form: Each Attendee Please Read, Complete, And Sign/date. Typewritten Is Preferred. Any Handwritten Forms Must Be Legible. email The Vcc At M-gu-nbg-n3at-vcc@fe.navy.mil To Have Their Dbids Programmed With The Specific Base Where The Project Is Located. Prior To Emailing The Vcc, Please Submit The Company Letter And The Dbids Base Access Request Form To The Poc In Subparagraph (c) Above For Approval. Once Approved, The Documents Will Be Sent Back To You For Submission To The Ngb Vcc Along With The Request To Have The Dbids Cards Programmed With The Specific Base Where The Project Is Located. request For Camera Pass Form: Applicable Only For Those With Dbids Credentials Who Will Be Taking Photos. One Letter Required Per Company. Dbids Number Is Required On The Form. Once Properly Submitted To The Poc In Subparagraph (c) Above And Once Approved, You Will Receive A Routing Number From The Poc. An Appointment With The Naval Base Guam (nbg) Visitor’s Control Center (vcc) Is Required To Complete The Processing Of Your Camera Pass. (2) No Dbids Credentials. Submit The Following: company Letterhead Template: One Letter Required Per Company. List Attendees In Alphabetical Order (by Last Name). Must Be Signed By A Person Authorized To Provide The Certification Required. secnav 5512/1 Form: Each Attendee Shall Read, Complete, And Sign/date Form. Typewritten Is Preferred. Any Handwritten Forms Must Be Legible. Do Not Submit The Secnav 5512/1 Form To The Government. The Contractor Is Responsible For Either Hand-carrying Or Emailing This Document To The Ngb Vcc Along With Any Other Pertinent Document Listed In This Subparagraph. dbids Base Access Request Form: Each Attendee Please Read, Complete, And Sign/date. Typewritten Is Preferred. Any Handwritten Forms Must Be Legible. naval Base Guam Foreign National Base Access Request Form (applicable To Foreign Nationals Only). Each Attendee Please Read And Complete. fn Biometric Data Form (applicable To Foreign Nationals Only): Each Attendee Please Read And Complete. request For Camera Pass Form: Applicable Only For Those With Dbids Credentials Who Will Be Taking Photos. One Letter Required Per Company. Once You Have A Routing Number From The Vcc For Your Dbids Application, Insert That Number On The Form. Once Properly Submitted To The Poc In Subparagraph (c) Above And Once Approved, You Will Receive A Routing Number From The Poc. An Appointment With The Naval Base Guam (nbg) Visitor’s Control Center (vcc) Is Required To Complete The Processing Of Your Camera Pass.
Department Of Agriculture Tender
Automobiles and Auto Parts
Philippines
Closing Soon7 Jan 2025
Tender AmountPHP 2.1 Million (USD 36.2 K)
Details: Description Invitation To Bid For The Procurement Of Hauling Vehicle Delivery Truck (open Cargo) Under Rice Program Fy 2024- Pss 1. The Department Of Agriculture Regional Field Office Iva Through The Rice Program Intends To Apply The Sum Of Two Million One Hundred Thousand Pesos (ᵽ 2,100,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Hauling Vehicle Delivery Truck (open Cargo) Under Rice Program Fy 2024 - Pss With Project Identification No.: Itb-2024-12-256. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. Hauling Vehicle Delivery Truck (open Cargo) A. Prime Mover Type: Diesel Engine Engine Displacement: 1400 Cc, Minimum B. Performance Classification Aspiration Method: Turbocharged And Intercooled Steering System: Power-assisted Steering Transmission System: Constant Mesh-synchromesh (manual) No. Of Drive: Two Emission Rating: Euro Iv, Minimum C. Body No. Of Wheels: Up To Six (6) Wheels Payload: 900 Kg, Minimum Gross Vehicle Weight: 16880 Kg, Maximum Front Cabin : Double Rear Body Type: Open Cargo D. Other Requirements / Inclusion 1. Fuel Tank Capacity: 80 Liters, Minimum 2. Output Power: 190 Ps, Minimum 3. Engine Torque: 450 N-m, Minimum 4. With Fiber Glass Canopy 5. Container Dimension: 5 Ft, Minimum 6. Warranty: 3 Years Or 100,000 Km Whichever Comes First 7. Certification Of Free Labor On Maintenance Service From The First 1,500 Km To 10,000 Km With Consumables Included Within Periodic Maintenance Schedule (pms). 8. Complete Set Of Tools As Per Manufacturer's Specifications, Tint, Seat Cover, Matting (cab), Air-conditioning System, Lto Registration For The First 3-years, Tpl And Comprehensive Insurance, Freight And Da Logo And "for Official Use Only" 9. Radio And Speakers: Tuner Radio With Usb, 2 Speakers 10. With 1 Unit Brand New Spare Tire With Rim And Accessories 11. Provision Of Vehicle Brochure And List Of Service Center In The Bidding Documents 12. With Certificate Of Conformity (coc) Issued By Denr Pursuant To Section 22, Chapter Ii Of Ra 8749 (clean Air Act Of 1999) In Relation To Part Ix, Rule Xxxi Of Denr Administrative Order 2000-81 13. With Certification Of Very Satisfactory Performance Of The Supplier From At Least Three (3) Clients, With Full Address And Telephone Numbers, Within The Last Two (2) Years. 14. With 100% Available Stocks In The Warehouse Of The Bidder During Post-qualification Place Of Delivery: Lares Compound, Brgy. Marawoy, Lipa City, Batangas Delivery Of The Goods Is Required Within Fifteen (15) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (ᵽ5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On December 26, 2024 01:00 Pm (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before January 7, 2025 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 01:00 Pm (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: December 17, 2024 ______________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee
after Tender
Others
France
Closing Date26 Jan 2025
Tender AmountRefer Documents
Details: The Works Include, For Information Only: 1-purges Of Sensitive Parts In Rockfill, 2-preliminary Purges Before Reinforcement By Sprayed Concrete, 3-support By Sprayed Concrete, Fiber Or Not. Installation Of Additional Ventilation For The Works..
621-630 of 650 active Tenders