Fencing Tenders

Details: Defence Research And Development Canada (drdc) Has A Requirement For Two (2) Field Programmable Gate Array (fpga) Based Development Platforms Evaluation Kit Or Equivalent. The Requirements Are To Be Delivered To The Following Address: Defence Research And Development Canada – Ottawa Research Centre Building 29 3701 Carling Ave Ottawa, On K2k 2y7 Canada The Equipment Must Meet The Requirements Detailed In The Statement Of Requirement (sor) Attached As An Annex To The Solicitation Document. The Deliverables Listed In The Table Under Section 5, Must Be Received On March 31, 2025 Or Earlier. Level Of Security: There Is No Security Requirement Applicable To The Contract. Applicable Trade Agreements: Canada Free Trade Agreement (cfta); Comprehensive Land Claims Agreement: There Will Be No Set-aside For Aboriginal Businesses. This Procurement Is Not Subject To A Comprehensive Land Claims Agreement. Requirement Details: It Is Dnd’s Intention To Award A Single Contract For This Requirement. Bidders Are To Refer To The Request For Proposal (rfp) For The Detailed Requirement. The Bidder That Offers The Responsive Bid With The Lowest Evaluated Price Will Be Recommended For The Award Of A Contract. Dnd Reserves The Right Not To Award A Contract, Regardless Of The Proposals Received. Where This Notice And The Rfp Differ, The Rfp Shall Prevail. Documents May Be Submitted In Either Official Language Of Canada. Canada Retains The Rights To Negotiate With Suppliers On Any Procurement.

Details: Pomerleau Inc., Acting As Contractor For The Project On Behalf Of Defence Construction Canada (the Client) For The Department Of National Defence (the Owner), Is Pleased To Invite You To Bid On This Construction Work Package (cwp). Bidders Interested In Participating In This Call For Tenders Shall Be Required To Obtain All Drawings And Tender Documents From The Building Connected Platform, Subject To The Applicable Conditions Of The Site. All Interested Parties To Confirm Intention To Bid Via Email To Ajettybid@pomerleau.ca By January 14, 2025. For Any Bid-related Questions, Please Submit Your Requests By Email To The Project Email Address, Ajettybid@pomerleau.ca. Please Send Your Questions No Later Than Five (5) Business Days Before The Tendering Deadline. There Will Be A Non-mandatory Site Visit Scheduled At Cfb Esquimalt. During This Presentation, Site Constraints Will Be Reviewed, And Bidders Will Have The Opportunity To Ask Questions Regarding The Scope Of Work. Please Register Your Attendance In Advance With Greg Ekholm, Project Manager, At Ajettybid@pomerleau.ca. The Bidder Cannot Visit The Job Site Without Pre-approval. The Bidder Assumes All Responsibility For Obtaining Sufficient Information And Is Fully Content And Satisfied That Full Knowledge Of All Matters Affecting The Proper Execution And Completion Of The Work Described In The Specifications And/or Drawings Relating To The Tender Has Been Obtained.

Details: Advance Procurement Notice Architectural And Engineering Consultant Services 5 Cdsb Gagetown, Oromocto, Nb. (with Security Requirements) Purpose Of This Advance Procurement Notice This Is Not A Bid Solicitation Nor A Request For Proposals. This Is An Advance Notice For Potential Contracts With Anticipated Security Requirements To Provide Interested Consultants An Opportunity To Begin The Sponsorship Process For Obtaining (if Required) The Anticipated Security Clearance(s) . Note That There Is No Guarantee That These Solicitations Will Proceed Or That Any Security Clearance(s) Will Be Granted Under The Sponsorship Process In A Timely Fashion Or Otherwise. Description Of The Project/program And Services Establishment Of The Multi-disciplinary Architectural And Engineering Services Source List (sl) With Firms Having Offices Within A 50 Km Radius Of 5 Cdsb Gagetown, New Brunswick. This Sl Will Replace Nb19sl01, Which Will Expire May 2025. Firms Added To This Source List Will Provide "as And When Required" Quick Response, Low Value Commissions (i.e. Less Than $100k) For Multi-disciplinary Professional Architectural And Engineering Design Services, Specific To The Department Of National Defence (dnd). It Is Anticipated That These Solicitations Will Be Initiated From May 2025. This Is Conditional On Receiving Approval To Proceed By The Department Of National Defence (dnd). The Consultants Will Be Required To Provide “as And When Required” Architectural And/or Engineering Services In Support Of The Following Types Of Projects:

Details: Pomerleau Inc., Acting As Contractor For The Project On Behalf Of Defence Construction Canada (the Client) For The Department Of National Defence (the Owner), Is Pleased To Invite You To Bid On This Construction Work Package (cwp). Bidders Interested In Participating In This Call For Tenders Shall Be Required To Obtain All Drawings And Tender Documents From The Building Connected Platform, Subject To The Applicable Conditions Of The Site. All Interested Parties To Confirm Intention To Bid Via Email To Ajettybid@pomerleau.ca By January 14, 2025. For Any Bid-related Questions, Please Submit Your Requests By Email To The Project Email Address, Ajettybid@pomerleau.ca. Please Send Your Questions No Later Than Five (5) Business Days Before The Tendering Deadline. There Will Be A Non-mandatory Site Visit Scheduled At Cfb Esquimalt. During This Presentation, Site Constraints Will Be Reviewed, And Bidders Will Have The Opportunity To Ask Questions Regarding The Scope Of Work. Please Register Your Attendance In Advance With Greg Ekholm, Project Manager, At Ajettybid@pomerleau.ca. The Bidder Cannot Visit The Job Site Without Pre-approval. The Bidder Assumes All Responsibility For Obtaining Sufficient Information And Is Fully Content And Satisfied That Full Knowledge Of All Matters Affecting The Proper Execution And Completion Of The Work Described In The Specifications And/or Drawings Relating To The Tender Has Been Obtained.

Details: Team Leidos Are Proud To Be Delivering The Logistics Commodities And Services Transformation (lcs(t)) Delivery Partner Contracts (lcs (t)/0001 Dated 16.4.2015) On Behalf Of The Uk Ministry Of Defence (the 'prime Contract'). Delivery Of Other Parts Of The Lcs(t) Contract Are Delivered By Leidos Europe Ltd (lel) And Other Partners (together 'team Leidos'). This Requirement Is Subject To The Public Procurement Regulations And Respective Advertising Action. The Defence Clothing Team, Which Forms Part Of Leidos Supply Ltd Is Considering The Potential Requirement For The Supply Of Flight Deck Helmets & Protective Head Pads On Behalf Of The Uk Mod, Consisting Of 1 Lot(s): Lot 1: - The Supply Of Flight Deck Helmets & Protective Head Pads The Total Estimated Value For This Contract Will Be Between £316,000 And £790,000, With A Total Contract Length Of 4 Years. If This Is Of Further Interest, Please Register On Our Eprocurement System, Jaggaer: Https://leidos-supply.app.jaggaer.com Bidders Will Be Able To Register On The System, And Once Registered They Can Express Their Interest And Complete Their Bid On There. Should Bidders Have Any Queries Regarding The System, Please Contact The Support Team On The Front Page Of The Jaggaer Website, Where It Says 'need Assistance?', For Help. Any Queries Regarding The Tender Itself, As Opposed To The System, Should Be Directed Through Jaggaer's Messaging Centre.

Details: Pomerleau Inc., Acting As Contractor For The Project On Behalf Of Defence Construction Canada (the Client) For The Department Of National Defence (the Owner), Is Pleased To Invite You To Bid On This Construction Work Package (cwp). Bidders Interested In Participating In This Call For Tenders Shall Be Required To Obtain All Drawings And Tender Documents From The Building Connected Platform, Subject To The Applicable Conditions Of The Site. All Interested Parties To Confirm Intention To Bid Via Email To Ajettybid@pomerleau.ca By January 14, 2025. For Any Bid-related Questions, Please Submit Your Requests By Email To The Project Email Address, Ajettybid@pomerleau.ca. Please Send Your Questions No Later Than Five (5) Business Days Before The Tendering Deadline. There Will Be A Non-mandatory Site Visit Scheduled At Cfb Esquimalt. During This Presentation, Site Constraints Will Be Reviewed, And Bidders Will Have The Opportunity To Ask Questions Regarding The Scope Of Work. Please Register Your Attendance In Advance With Greg Ekholm, Project Manager, At Ajettybid@pomerleau.ca. The Bidder Cannot Visit The Job Site Without Pre-approval. The Bidder Assumes All Responsibility For Obtaining Sufficient Information And Is Fully Content And Satisfied That Full Knowledge Of All Matters Affecting The Proper Execution And Completion Of The Work Described In The Specifications And/or Drawings Relating To The Tender Has Been Obtained.

Description: Public tender Vob/a, L 3195 cycle path Bruchköbel - Roßdorf new route construction, cycle path construction: -4,550 m2 explosive ordnance search, - clearing of approx. 100 trees and 1,150 m2 bushes, - 770 m3 topsoil work, - 1,680 m3 excavation work, - 2,050 m2 qualified soil improvement, -1,640 m2 AC 22 Tl and AC 8 Dl, - bus stop conversion, - sidewalk changes, - railing and fence construction work, Eam: - lighting system, 600 m of conduit laying and 750 m of cable laying, De: - 900 m2 Ac 11 Dsp roundabout, - 4,850 m2 Ac 11 Dn route

Description: CATEGORY: Weld Mesh Panels With Accessories. , Omega clamps , Mushroom Head Bolt Nut with Washer , Fence Post. , Straining Y Arm for supporting top PTCC Material. , Accessories for fitting Y Arm. , Intermediate Y Arm for supporting top PTCC Material. , Anchor Rod. , Punched Tape Concertina Coil. , Galvanised Steel Barbed Wire ISI marked. , Quick setting compound , Aggregate 20mm Stone Aggregate , Aggregate 40mm Stone Aggregate , Ms Binding wire not less than 0.9mm dia , Natural sand confirming to IS 383 of 1970 , Portable Welding Machine , Wire Cutter 18 inch , Aluminium Ladder 9 steps , Hand Gloves Leather 500 G , Hand Gloves Canvas , Hand Gloves Rubber , Bold Cutter 12 inch , Y Joint 10 Feet long , Y Joint 12 Feet long , Hammer Sledge 4lbs , Steel Gurmala or Planer , Plumbob and Mason Thread , Cutting pliers size 8 , Showel with Wooden Handle , Hacksaw frame , Wooden Gurmala , Ratchet Spanner Single Socket 14 sproket , Trowel Masson Brick Carandy , Water Level Pipe 100 m , Hack Saw Blade Double Ended , Measuring Tape 5 mtr , Measuring Tape 30 mtr , Axis Pick with wooden Handle , Iron cutting machine , Drill machine complete Set , Drill Bits complete Set , Ratchet Spanner with deep Socket 12 or 13 mm , Welding Rods , Hog ring curd , Rivet Gun machine , Binding stick , Tasla Iron 18 inch , HDPE water storage tank 500 Ltr , Fawada with wooden handle , Crow bar 5 feet long , Bolt cutter 32 inch , Wire cutter 150 mm , Suction cum delivery pipe plastic 1 inch dia 200m long , Iron cutting machine blade , Alluminium straight edge 50mm sq 2 mm thick 1800mm long

Description: CATEGORY: Weld Mesh Panels With Accessories. , Omega clamps , Mushroom Head Bolt Nut with Washer , Fence Post. , Straining Y Arm for supporting top PTCC Material. , Accessories for fitting Y Arm. , Intermediate Y Arm for supporting top PTCC Material. , Anchor Rod. , Punched Tape Concertina Coil. , Galvanised Steel Barbed Wire ISI marked. , Quick setting compound , Aggregate 20mm Stone Aggregate , Aggregate 40mm Stone Aggregate , Ms Binding wire not less than 0.9mm dia , Natural sand confirming to IS 383 of 1970 , Portable Welding Machine , Wire Cutter 18 inch , Aluminium Ladder 9 steps , Hand Gloves Leather 500 G , Hand Gloves Canvas , Hand Gloves Rubber , Bold Cutter 12 inch , Y Joint 10 Feet long , Y Joint 12 Feet long , Hammer Sledge 4lbs , Steel Gurmala or Planer , Plumbob and Mason Thread , Cutting pliers size 8 , Showel with Wooden Handle , Hacksaw frame , Wooden Gurmala , Ratchet Spanner Single Socket 14 sproket , Trowel Masson Brick Carandy , Water Level Pipe 100 m , Hack Saw Blade Double Ended , Measuring Tape 5 mtr , Measuring Tape 30 mtr , Axis Pick with wooden Handle , Iron cutting machine , Drill machine complete Set , Drill Bits complete Set , Ratchet Spanner with deep Socket 12 or 13 mm , Welding Rods , Hog ring curd , Rivet Gun machine , Binding stick , Tasla Iron 18 inch , HDPE water storage tank 500 Ltr , Fawada with wooden handle , Crow bar 5 feet long , Bolt cutter 32 inch , Wire cutter 150 mm , Suction cum delivery pipe plastic 1 inch dia 200m long , Iron cutting machine blade , Alluminium straight edge 50mm sq 2 mm thick 1800mm long

Description: Nsn 4320-123402970, Pump, Radial Pistons. This Material Is Being Procured From Iveco Defence Vehicles S.p.a. (a4249) P/n 60155077 the Required Quantity Is 40 Each With A 100% Quantity Option To Be Shipped To Dodaac (w25g1u) Dla Distribution New Cumberland Facility With A Required Delivery Of 390 Days. Fob Origin (first Destination Transportation Applies) And Inspection And Acceptance At Destination Are Required. This Solicitation Is Not Set-aside For Small Business. This Material Is Not Commercial; Therefore, The Government Is Not Using The Policies Contained In Far Part 12 In Its Solicitation For This Item. However, Interested Suppliers May Identify To The Contracting Officer Their Interest And Capability To Satisfy The Government’s Requirement With The Commercial Item Within 15 Days Of This Notice. This Solicitation Will Be Available On The Internet At Https://www.dibbs.bsm.dla.mil// After The Issue Date Of 01/21/2025. Due To System Constraints, It May Take As Long As 3 Business Days From The Stated Issue Date For The Solicitation To Post To Dibbs. Technical Drawings/bid Sets Are Not Available. Hard Copies Of This Solicitation Are Not Available. While Price May Be A Significant Factor In The Evaluation Of Offers, Proposals Will Be Evaluated According To “best Value” Procedures On The Basis Of Price, Past Performance, And Delivery. All Offers Shall Be In English And In Us Dollars. One Or More Of The Items Under This Acquisition May Be Subject To An Agreement On Government Procurement Approved And Implemented In The Us By The Trade Agreements Act Of 1979. upload Proposal Through Dibbs (preferred Method) to Submit An Offer Through Dibbs, Search For The Solicitation And Then Click The Red "offer" Button On The Search Results Screen (note: Users Must Be Logged In To Dibbs In Order To Submit The Offer Through Dibbs). For Additional Guidance, Refer To Https://www.dibbs.bsm.dla.mil/refs/help/solicitations/dibbs-upload-offer-user-help.pdf email Proposals To: Danielle.jilton@dla.mil a Single Email Cannot Exceed 15 Mb. Proposals Greater Than 15 Mb Must Be Divided Into Multiple Emails.