Fencing Tenders

Description: CATEGORY: Cement OPC 43 grade , Sand Coarse confirming to IS 3831970 , Aggregate 20 mm graded to be crushed rock , Aggregate 40 mm graded to be crushed rock , MS angle iron of size 65 x 65 x 6 mm and 4 point 20 Mtr , MS angle iron of size 65 x 65 x 6 mm and 3 poin 40 Mtr , MS Flat iron of size 40 x 5 mm and 2 poinrt 10 Mtr , TMT Bar of 10 mm dia and 3 point 10 Mtr , Chain link Fence 2 point 10 Mtr height , Two strand of barbed wire made out of GI wire of size 2.24 mm dia , Concertina Coil Punched Tape of 600 mm , Security Gate of size 6 point 00 M x 2 point 40 M as per drg att , MS Nut and bolt with washer of size 12 mm dia and 75 mm long. , MS Nut and bolt with washer of size 12 mm dia and 50 mm long , Binding wire 20 gauge 0.9 mm annealed , Shuttering plywood of size 6 feet x 4 feet and 12mm thickness , Nails 2 inch for shuttering , Nails 3 inch for shuttering , Nails 4 inch for shuttering , 2nd class hardwood plain fillets 3 point 00 mtr long and section 50mm x 50mm , Wooden scantling 3mtr long section 100mm x 75mm , TMT Bar 12 mm dia , TMT Bar 10 mm dia , TMT Bar 8 mm dia , Quick Setting Compound , Acrylic Emulsian Paint , Solar Street Light 25 W including pole having length 5 Mtr long 75 mm dia , Pan Motor Tasala 18 inch dia , Showel with wooden handle , Axes Picks 03 Kg head with handle , Wire mess for seving Sand 8 feet x 5 feet , Trowels as per ISI Mark , Brick Hammer 500 gm with handle , Stone Cracker with handle , Plum Bob steel , Nylon mason thread 100 Mtr long , Measuring Tape 05 Mtr retractable grade AI 16 , Measuring Tape 30 Mtr retractable grade AI 16 , Gum Boot , Hand Gloves Rubber , Drilling Machine portable , Steel Cutter Machine with blade , Steel Wood Cutter circular saw , Steel Cutting Blade 4 inch , Steel Cutting Blade 14 inch , Hexa Blade 350 mm long ISI 1st Quality , Welding Machine Portable inverter type , Welding Rod , Auto Darkening Welding Helment , Welding Gloves , Portable Diesel Generator Set 5 KVA , Tool kit , Tape Insulation 1 point 5 inch x 15 Mtr with ISI mark

Description: This Is A Notice Of Intent, Not A Request For A Quotation. A Solicitation Document Will Not Be Issued, And Quotations Will Not Be Requested.the Environmental Protection Agency (epa) Intends To Award A Fixed Price Contract On A Sole Source Basis To Sensit Technologies, 851 Transport Drive, Valparaiso, In For Purchase Of Five (5) Sensit Spot Volatile Organic Compound (voc) Measurement Devices.the Requirement Is For Five Measurement Devices. The Devices Are Needed To Support And Supplement Air Toxics Monitoring Being Conducted By Epa Region 4 And Its Partner State/local/tribal Agencies. The Sensit Spod Voc Sensors Are Already In Use For Epa Region 4’s Existing Voc Sensor Loan Program, So Using Sensit Spods Would Provide Consistency And Continuity In The Program. The Sensit Sensors Are The Only Identified Commercially Available Voc Sensors That Meet Epa’s Project Requirements. Additionally, The Sensit Sensors Have Been Purchased And Tested By Epa Ord And Oeca And Have Been Found To Meet Performance Requirements For Fence-line Monitoring Applications (similar To The Epa-developed Spod). In The Single, Side By Side Sensor Comparison Executed By Ord That Involved Lunaroutpost Canary-s (the Only Other Identified Commercially Available Voc Sensor), The Lunaroutpost Sensors Did Not Meet Performance Requirements For Baseline Stability. The Lack Of A Heated Sensor Element In The Lunar System Is Believed To Be An Issue. The Heated Sensor Element Is Present In Both The Epa Developed Spod Open-source Design And Sensit Spods, And This Sensor Heater Provides Baseline Stability Improvements (not Yet Present In The Lunar Sensor). The Lunar Sensors Have Not Yet Shown To Meet Epa Designed Spod Performance Benchmarks. The Sensit Spod Is The Only Commercially Available Real Time Voc Measurement Device With A Heated Sensor Element.this Purchase Will Be Made Utilizing Simplified Acquisition Procedures In Accordance With Federal Regulation (far) Part 13.106-1(b)(1) For Purchases Not Exceeding The Simplified Acquisition Threshold Of $250,000.00. Pursuant To The Authority Granted By 41 U.s.c.253(c) (1), Only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements As Implemented By Far 6.302-1, The U.s. Environmental Protection Agency (epa), Office Of Mission Support’s Acquisition And Grants Management’s Branch Intends To Issue A Purchase Order To Sensit Technologies For The Five Measurement Devices. The Sole Source Nature Of This Requirement Is Based On The Determination That Sensit Technologies Is The Only Organization That Can Provide This Commercially Available System. Market Research Was Conducted, And The Only Other Commercially Available System Does Not Meet The Requirements (heated Sensor Element And Baseline Stability In Previous Testing).the Determination Not To Compete This Proposed Contract Action Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered For The Purposes Of Determining Whether To Conduct A Competitive Procurement. The Government Will Not Be Responsible For Any Costs Incurred By Responding To This Notice. Questions Or Comments To This Notice Of Intent Should Be Directed To The Contracting Officer, Clare Hingsbergen, Hingsbergen.clare@epa.gov And/or The Contract Specialist, Femi Obadina, Obadina.olufemi@epa.gov. Please Indicate In The Subject Of Your Email: Notice Of Intent Submission: Requisition Pr-r4-24-00037.

Description: CATEGORY: Table post with two cam joint 17-19 inch , 22-24 inch crossbar with 2 cam joints - wide , Bilateral crossbar hinged 32 - 36 inch , Angled arm 16-20 inch 8x10 inch , Angled arm 22-26 inch 8x16 inch , Angling micro adjustable blade holder 7- 9 inch , Angling micro adjustable blade holder 10 - 14 inch , 18-22 inch lower abdominal bar 12 - 16 x 4 - 8 inch , T-Handle , Container 26x10x5 to 28x12x8 inch , Harris prostate retractor 7- 9 mm , Malleable blade 12 - 14 mm x 150 - 154 mm , Malleable blade 12 - 14 mm x 200 - 208 mm , Malleable blade 24 - 26 mm x 200 - 208 mm , Malleable blade 50 - 52 mm x 200 - 208 mm , Malleable blade 36 - 40 mm x 200 - 208 mm , Malleable blade 62 - 66 mm x 252 - 256 mm , Malleable blade 100 - 104 mm x 252 - 256 mm , Malleable slotted blade 50 - 52 mm x 200 - 208 mm , Concave round neck renal blade 24 - 26 mm x 188 - 194 mm , Kelly blade 74 - 78 mm x 87 - 91 mm , Fence blade 100 - 104 mm x 150 - 154 mm , Y bladder blade 79 - 83 mm x 214 - 218 mm , Balfour sm lips 64 - 68 mm x 71 - 75 mm , Balfour sm lips 76 - 80 mm x 71 - 75 mm , Balfour with lips 81 - 85 mm x 71 - 75 mm , Balfour with lips 49 - 53 mm x 52 - 56 mm , Richardson 49 - 53 mm x 176 - 180 mm , Harrington 62 - 66 mm x 150 - 154 mm , Deaver 49 - 53 mm x 125 - 129 mm , St. Marks with lip 62 - 66 mm x 176 - 180 mm , Malleable finger 150 - 154 mm , Murphy blunt 24 - 26 mm x 11 - 15 mm , Wide balfour 98 - 102 mm x 59 - 63 mm , Double angled 24 - 26 mm x 74-78 mm , Double angled 11 - 15 mm x 74 - 78 mm , Double angled bulb 23 - 27 mm x 62 - 66 mm , Instrument case 21 - 25 x 9 - 13 x 3 - 4 inch , Serrated cam joint 0.5 x 0.5

Details: Defence Construction Canada, Canadian Multi-mission Aircraft (cmma) Flight Training Facility, Canadian Forces Base 14 Wing, Greenwood, Nova Scotia, Gw24cmma 81655 Defence Construction Canada (dcc) Is Requesting Proposals From Design-build Teams To Design And Construct The New Flight Training Facility To Be Located At Canadian Forces Base At 14 Wing Greenwood, Nova Scotia, Following A Modified Design-build Approach. Additional Details Are Provided In The Request For Proposals (rfp) Documents. The Rough Order Magnitude Construction Cost Estimate For This Project Is $71.7 Million. Firms That Consider Themselves Qualified To Provide These Services Are Invited To Submit Their Proposals Through The Merx Electronic Bidding System On Or Before The Closing Date And Time Indicated On The Electronic Bidding System. This Solicitation Is Being Conducted In Accordance With The Requirements Set Out In The Canadian Free Trade Agreement (cfta), Chapter Nineteen Of The Canada-european Union Comprehensive Economic And Trade Agreement (ceta) And The World Trade Organization Agreement On Government Procurement (wto-gpa). The Selected Design-builder Will Be Required To Hold A Valid Facility Security Clearance At The Level Of Secret And Obtain Approved Document Safeguarding Capability At The Level Of Secret, Issued By The Contract Security Program (csp), Public Works And Government Services Canada (pwgsc). Details Concerning The Security Clearance Requirements For This Project Are Identified In Amendment No.1 To The Tender Documents. Questions Regarding This Solicitation Are To Be Directed Only To The Point Of Contact Identified In This Advertisement. Bidders Who Address Their Questions To Anyone Other Than The Point Of Contact During The Solicitation Period May, For That Reason Alone, Be Disqualified. Bidders Can Obtain Contract Award Results From The Dcc Website At Https://www.dcc-cdc.gc.ca/industry/contract-activity. Dcc Now Publicly Discloses Information On Payments Made To Prime Contractors So That Subcontractors Know When They Can Expect Payment. Information On Payments Made In The Past 90 Days On Construction Contracts Over $100,000, As Well As Further Information Regarding Dcc’s Prompt Payment Commitment, Can Be Obtained From The Dcc Website At Https://www.dcc-cdc.gc.ca/industry/contract-activity.

Details: Legal Notice To Bidders Sealed Bids For Phase 2 George Harrison Soccer Complex Will Be Received By The City Of Olive Branch At 9200 Pigeon Roost Road, Olive Branch, Mississippi 38654 Until 2:00 P.m. Local Time On Monday, December 9, 2024 And Thereafter Will Be Opened And Publicly Read. The Project Consists Of The Installation Of Soccer Fields, A Concession Building, Parking, Fencing, Lighting, Irrigation, And Signage Within The City Of Olive Branch Ms. A Pre-bid Conference Will Be Held At City Hall At 12:00 P.m. Local Time On Monday, December 2nd, 2024, In Order To Discuss The Scope And Schedule For The Project. Plans, Specifications And Contract Documents May Be Picked Up At The Office Of Karen Mcneil, Purchasing Manager, 9200 Pigeon Roost Road, Olive Branch, Mississippi (662-892-9208) Or Via Email At Karen.mcneil@obms.us. In Addition, Official Bid Documents Can Be Downloaded From Central Bidding At Www.centralbidding.com. Electronic Bids Can Be Submitted At Www.centralbidding.com. Electronic Bids Are Due The Same Time And Date As Sealed Bids. For Any Questions Relating To The Electronic Bidding Process, Please Call Central Bidding At 225-810-4814. Each Bid Must Be Submitted In A Sealed Envelope, Addressed To The City Clerk, City Of Olive Branch, 9200 Pigeon Roost Road, Olive Branch, Mississippi 38654. Each Envelope Must Be Plainly Marked On The Outside As “phase 2 George Harrison Soccer Complex” And Must Bear On The Outside The Date The Bid Is To Be Opened. Opened Bids Will Be Presented For Consideration At A Regular Meeting Of The Mayor And Board Of Aldermen Of The City Of Olive Branch. Each Bid Shall Be Accompanied By A Bidder’s Bond Issued By A Surety Company Licensed To Operate In The State Of Mississippi, In The Amount Of 5% Of The Total Maximum Bid Price, As A Guarantee That If The Bid Is Accepted, The Bidder Will Enter Into A Contract And Execute The Performance And Payment Bonds In The Form And Within The Time Specified. The Successful Bidder Will Be Required To Execute A Performance Bond And A Payment Bond, Each In The Amount Of 100% Of The Contract, Issued By A Surety Company Licensed To Operate In The State Of Mississippi And Shall Be Named In The Current List Of "companies Holding Certificates Of Authority As Acceptable Sureties On Federal Bonds And As Acceptable Reinsuring Companies" As Published In Circular 570 (amended) By The Audit Staff Bureau Of Accounts, U.s. Treasury Department. Each Bidder Shall Have A Certificate Of Responsibility To Bid On Contracts For Public Projects In Which The Bid Price Exceeds $50,000.00 And For Private Projects In Which The Bid Price Exceeds $100,000.00 As Required By The Laws Of The State Of Mississippi. Each Bidder Shall Show On The Outside Of The Envelope Containing His Bid: His Current Certificate Of Responsibility Number And Expiration Date Or If Applicable, A Statement Certifying That The Bid Enclosed Does Not Exceed $50,000.00 For A Public Project Or $100,000.00 For A Private Project. Failure To Show These Items On The Outside Of The Envelope Containing The Bid Will Result In The Bid Being Returned To Bidder Unopened. No Bidder May Withdraw His Bid For A Period Of Sixty (60) Days After Date Of Actual Bid Opening, Without The Owner's Consent. The City Of Olive Branch Reserves The Right To Reject Any Or All Bids In Whole Or In Part, With Or Without Cause; And To Accept The Lowest Bid Which In Its Judgment Will Be For The Best Interest Of The City Of Olive Branch. Witness My Signature This The 29th Day Of October, 2024. /s/ Tena Stewart, City Clerk

Details: Description 1. The Municipality Of San Antonio, Zambales, Through The Sef (lsb Resolution No. 001) Intends To Apply The Sum Of One Million, Two Hundred Thousand Pesos (php 1,200,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Various Construction Works For Schools. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of San Antonio, Zambales Now Invites Bids For The Various Construction Works For Schools (construction Of Comfort Room At Trymes = Php 650,000.00, And Construction Of Perimeter Fence At Wdes = Php 550,000.00). Completion Of The Works Is Required Sixty (60) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184.

Details: Amendment To Closing Time: Please Disregard The Ariba Discovery Posting Response Deadline Closing Time And Canadabuys Posting Closing Time. All Required Supporting Documentation And Bid Submission Must Be Submitted On 2025-01-16 By 2:00 Pm Est. All Bids Submitted After 2:00 Pm Est Will Result In The Bid Being Declared Non-responsive. Reissue Of Solicitation Of Offers. This Solicitation Of Offers Cancels And Supersedes Previous Solicitation Of Offers Number Ws4621217058 Dated 2024-08-12 With A Closing Of 2024-09-18 At 2:00 Pm Edt. A Debriefing Or Feedback Session Will Be Provided Upon Request To Offeror's Who Offered On The Previous Solicitation Of Offers. Canada Is Seeking Offers From Offerors To Provide For The Supply, Delivery, Installation And Servicing Of Pharmaceutical Freezers To Department Of National Defence, Canadian Forces Base Garrison Petawawa. The Initial Firm Requirement Must Be Delivered No Later Than 2025-03-31. Installation And Qualification Protocol, To Include Installation Qualification, Operational Qualification, And Performance Qualification, Must Begin Within Eight (8) Weeks Of Contract Award.

Details: Details Tender Number Spsc-b-024-2024 Department Defence Tender Type Request For Bid(open-tender) Province Kwa-zulu Natal Date Published 25/11/2024 Closing Date 10/01/2025 11 00 Place Where Goods, Works Or Services Are Required Collingwood Road-jacobs-durban-4026 Special Conditions Administrative Enquiries Chief Petty Officer I. Van Der Westhuizen 021 787 5207 Spscbidinvitation@dod.mil.za Technical Enquiries Staff Sergeant N. Jantjies 021 787 5144 Spsctechnical@dod.mil.za Enquiries Contact Person Chief Petty Officer I. Van Der Westhuizen Email Spscbidinvitation@dod.mil.za Telephone Number 021-787-5207 Fax Number N/a Briefing Session Is There A Briefing Session? Yes Is It Compulsory? Yes Briefing Date And Time 12/12/2024 11 00 Briefing Venue Dod Mosd Durban, 1 Collingwood Road, Jacobs, 4026, Kwa-zulu Natal Tender Documents Spsc-b-024-2024.pdf

Details: Land extension Kita Entdeckerland - pruning work - clearing work - disposal - earthworks - fencing work

Details: Description ------------------------------------------------------------------------------------------------------------------------- Item No. ....... Estimated Quantity ....... Unit ......... Particulars ------------------------------------------------------------------------------------------------------------------------- Construction Of Fence ------------------------------------------------------------------------------------------------------------------------- 1.00 .......................... 17.28 .................. Cu M. ........... Excavation 2.00 .......................... 17.28 .................. Cu M. ........... Concrete Works And Formworks 3.00 .......................... 94.62 .................. Kgs .............. Rebars 4.00 ......................... 192 ...................... Span ............ Metal Works 5.00 .......................... 79.3 .................... Sm .............. Painting Works ------------------------------------------------------------------------------------------------------------------------- Drainage System ------------------------------------------------------------------------------------------------------------------------- 6.00 ........................ 405 ....................... Cu M. ........... Excavation (common Soil) 7.00 .......................... 72 ....................... Cu M. ........... Embankment From Structure Excavation 8.00 ...................... 2000 ....................... Cu M. ........... Embankment From Common Borrow 9.00 ........................... 1 ........................ Each ............ Manhole 10.00 ...................... 192 ....................... In.m ............. Rc Pipes Culverts, 1220mm Dia(48” Dia.) ------------------------------------------------------------------------------------------------------------------------- Leachate Collection System And Treatment ------------------------------------------------------------------------------------------------------------------------- 11.00 ...................... 139 ........................ Pcs .............. Leachate Collection Pipes 12.00 ........................ 40 ........................ Pcs .............. Installation Of Gas Pipes 13.00 .......................... 1 ........................ Lot .............. Rehabilitation Aeration Pit And Construction Of ................................................................................... Sedimentation Tank And Disinfection Tank At Slf Cell 1 14.00 .......................... 1 ........................ Lot .............. Construction Of Aeration Pit, Sedimentation Tank And ................................................................................... Chlorination Tank Catering Closed Area ................................................................................... (phase 1,2,3 And 4) -------------------------------------------------------------------------------------------------------------------------