Fencing Tenders

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Iv-a Canlubang Interchange, Brgy. Mayapa, Calamba, Laguna Invitation To Bid 1. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 1. Name Of Contract : Fy2024 Dpwh Infrastructure Program Sustainable Infrastructure Projects Alleviating Gaps (sipag), Major/strategic Public Buildings/facilities Structural And Resilience Program Construction Of Tagaytay Tourist (iconic Tower) Phase 6, Barangay Kaybagal South, Tagaytay City Contract Id No. : 24d00295 Contract Location : Cavite Province Scope Of Works : Structural - Concrete Beams And Girders From Ts-1 To Ts-6 - Suspended Slabs From Ts-1 To Ts-6 - Shear Wall - Retaining Wall - Stairs From Ts-1 To Ts-6 Approved Budget For The Contract : ₱144,750,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 2. Name Of Contract : Fy2024 Dpwh Infrastructure Program Basic Infrastructure Program (bip), Multi-purpose Buildings/facilities To Support Social Services Construction Of Multi-purpose Facilities, Brgy. Kaybagal South, Tagaytay City, Cavite (phase 9) Contract Id No. : 24d00296 Contract Location : Cavite Province Scope Of Works : Structural - All Reinforced Concrete Columns - Stairs From Second Floor To Ts-1 Plumbing - Sanitary And Waterline Rough-ins From Lower Ground Floor To Ts-6 Electrical - Conduits, Boxes, And Fittings Rough-ins - Wires And Wiring Devices Mechanical - Fire Protection Sleeving Works Approved Budget For The Contract : ₱99,000,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 3. Name Of Contract : Fy2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip), Multi-purpose Buildings / Facilities To Support Social Services Construction Of Multi-purpose Facilities, Brgy. Kaybagal South, Tagaytay City, Cavite, (phase 5) Contract Id No. : 24d00297 Contract Location : Cavite Province Scope Of Works : Structural - Foundation Works - Concrete Beams And Girders From Foundation To Mall Roof - Suspended Slabs From Lower Ground Floor To Mall Roof - Shear Wall - Retaining Wall - Stairs From Lower Ground Floor To Mall Roof Approved Budget For The Contract : ₱495,000,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Large B License Category : Aaaa And Aaa Cost Of Bidding Documents : ₱50,000.00 4. Name Of Contract : Structural Improvement Of Public Buildings And Construction Of Evacuation Centers Region Iv-a, Atimonan, Quezon Contract Id No. : 24d00298 Contract Location : Quezon Province Scope Of Works : The Construction Project Entails The Development Of A Permanent Evacuation Center/multi-purpose Covered Court, Incorporating Various Facilities And Features Including A Laundry & Drying Area, Material Recovery Facility, Cistern Tank, Mess Hall Equipped With A Kitchen, Administrative Office, Storage Area, And A Play Area Accompanied By A Breastfeeding Room. Additionally, The Project Will Integrate A Conjugal Space, Distinct Male & Female Toilet And Bath Facilities With Accommodations For Persons With Disabilities (pwd), A Clinic, And A Prayer Room. Moreover, The Project Will Be Enhanced With A Fire Protection System And A Generator Set, Complete With A Dedicated Generator Room, Painting Works Are Not Included. Approved Budget For The Contract : ₱41,495,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱25,000.00 5. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/ Improvement Of Access Roads Leading To Seaports (kalsada Tungo Sa Paliparan, Riles At Daungan Program - Katuparan) Access Road Leading To Calatagan Port, Calatagan, Batangas Contract Id No. : 25d00052 Contract Location : Batangas Province Scope Of Works : Road Opening And Construction Of Roads For 2 Lanes And 4 Lanes Carriageway Including Construction Of Gabions Slope Protection, Rcpc Drainage Structure And Miscellaneous Structures. Approved Budget For The Contract : ₱175,038,455.00 Net Length : Gravel : 6.77 Lane Km Concrete : 6.77 Lane Km; Slope Protection = 4,230 Sq.m. Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium B License Category : A Cost Of Bidding Documents : ₱50,000.00 6. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/improvement Of Various Infrastructures In Support Of National Security (tatag Ng Imprastraktura Para Sa Kapayapaan At Seguridad Program - Tikas) Construction Of New Cavite Naval Hospital (level 1), Naval Station Pascual Ledesma, Cavite City, Cavite, Phase Ii Contract Id No. : 25d00066 Contract Location : Cavite Province Scope Of Works : Genset Building (2-units) Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - All Suspended Slabs For Roof Deck Architectural - Waterproofing (roof Deck) - Fiber Cement - Ceiling - Cement Floor Finish - 150mm Chb Walls - Louver Type Walls - Wall Plaster Finish - Painting Works (masonry) - Steel Doors And Frames Electrical - Panel Board With Main & Branch Breaker - Wires And Wiring Devices - Lighting Fixtures And Lamps - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) - Grounding System - Wirings - Generators Elevated Water Tank Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - All Suspended Slabs For Roof Decks - Structural Steel For Ladder And Support Architectural - Waterproofing (roof Decks) - Cement Floor Finish - Fiber-cement Ceiling - 150mm Chb Walls - Wall Plaster Finish - Painting Works - Steel Doors Plumbing - Plumbing Line Works - Cold Water Lines - Water Tank - Pumping System Electrical - Panel Board With Main & Branch Breakers - Lighting Fixtures And Lamps - Wires And Wiring Devices - Wirings - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) - Grounding Systems Sewage Treatment Plant Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - Roof Truss, Purlins, And Sagrods - Stp Walls, Mat Foundation, And Slab - Wall Fence Architectural - Cement Floor Finish - Fiber Cement Ceiling - 150mm Chb Walls - Cement Plaster Finish - Painting Works - Louver Doors And Windows - Roofing Works - Railings Plumbing - Sewage Treatment Plant (stp) – Dynamic Sequential Batch Reactor Electrical - Grounding System - Lighting Fixtures And Lamps - Conduit, Boxes And Fittings (conduit Works / Conduit Rough-ins) Mechanical Airconditioning Units For Auxiliary Buildings - Out-patient Department - Dietary - Laundry And Linen - Engineering And Maintenance - Central Waste Storage - Property And Supply - Cadaver Holding Area Plumbing Septic Tanks For Auxiliary Buildings - Out-patient Department - Doctors And Nurses Quarters - Dietary - Laundry And Linen - Engineering And Maintenance - Cadaver Holding Area Structural Steel Stairs For Auxiliary Buildings - Out-patient Department Main Building Plumbing - Plumbing Line Works Electrical - Wirings - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) Mechanical - Ventilation Works Approved Budget For The Contract : ₱96,500,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. For Item Nos. 5 & 6 The Bac Is Conducting The Public Bidding For This Contract Pursuant To Gppb Circular 06-2019 Dated July 17, 2019 (guidelines On The Implementation Of Early Procurement Activities) In Relation To The Provisions Of The Republic Act 9184 And Its Implementing Rules And Regulations (irr). The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8am – 2pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On October 30, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents (amount Indicated On The Above Table). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Will Hold A Pre-bid Conference On November 06, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna And Through Video Conferencing Via Zoom And Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg Which Shall Be Open To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_r4a@dpwh.gov.ph For Electronic Submission On Or Before November 19, 2024 @ 10:00 A.m. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On November 19, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above Or Through Video Conferencing Via Zoom Which Shall Also Be Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg. Late Bids Shall Not Be Accepted. 10. If At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid. 11. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Cheryll C. Antonio - David Bac, Vice Chairperson Chief, Administrative Officer Administrative Division Telephone No. (02) (049) 34810220 Email Address: R4a.procurement@gmail.com Alex B. Virtudazo Bac Secretariat Head Telephone No. (02) (049) 34810215 / 34810225 Email Address: R4a.procurement@gmail.com Department Of Public Works And Highways Regional Office No. Iv-a Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna 13. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph. For Online Bid Submission At Electronicbids_r4a@dpwh.gov.ph. October 29, 2024 Approved By: Sgd Atty. Cheryll C. Antonio - David Chief, Administrative Officer Administrative Division Bac Vice Chairperson

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Iv-a Canlubang Interchange, Brgy. Mayapa, Calamba, Laguna Invitation To Bid 1. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 1. Name Of Contract : Fy2024 Dpwh Infrastructure Program Sustainable Infrastructure Projects Alleviating Gaps (sipag), Major/strategic Public Buildings/facilities Structural And Resilience Program Construction Of Tagaytay Tourist (iconic Tower) Phase 6, Barangay Kaybagal South, Tagaytay City Contract Id No. : 24d00295 Contract Location : Cavite Province Scope Of Works : Structural - Concrete Beams And Girders From Ts-1 To Ts-6 - Suspended Slabs From Ts-1 To Ts-6 - Shear Wall - Retaining Wall - Stairs From Ts-1 To Ts-6 Approved Budget For The Contract : ₱144,750,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 2. Name Of Contract : Fy2024 Dpwh Infrastructure Program Basic Infrastructure Program (bip), Multi-purpose Buildings/facilities To Support Social Services Construction Of Multi-purpose Facilities, Brgy. Kaybagal South, Tagaytay City, Cavite (phase 9) Contract Id No. : 24d00296 Contract Location : Cavite Province Scope Of Works : Structural - All Reinforced Concrete Columns - Stairs From Second Floor To Ts-1 Plumbing - Sanitary And Waterline Rough-ins From Lower Ground Floor To Ts-6 Electrical - Conduits, Boxes, And Fittings Rough-ins - Wires And Wiring Devices Mechanical - Fire Protection Sleeving Works Approved Budget For The Contract : ₱99,000,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 3. Name Of Contract : Fy2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip), Multi-purpose Buildings / Facilities To Support Social Services Construction Of Multi-purpose Facilities, Brgy. Kaybagal South, Tagaytay City, Cavite, (phase 5) Contract Id No. : 24d00297 Contract Location : Cavite Province Scope Of Works : Structural - Foundation Works - Concrete Beams And Girders From Foundation To Mall Roof - Suspended Slabs From Lower Ground Floor To Mall Roof - Shear Wall - Retaining Wall - Stairs From Lower Ground Floor To Mall Roof Approved Budget For The Contract : ₱495,000,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Large B License Category : Aaaa And Aaa Cost Of Bidding Documents : ₱50,000.00 4. Name Of Contract : Structural Improvement Of Public Buildings And Construction Of Evacuation Centers Region Iv-a, Atimonan, Quezon Contract Id No. : 24d00298 Contract Location : Quezon Province Scope Of Works : The Construction Project Entails The Development Of A Permanent Evacuation Center/multi-purpose Covered Court, Incorporating Various Facilities And Features Including A Laundry & Drying Area, Material Recovery Facility, Cistern Tank, Mess Hall Equipped With A Kitchen, Administrative Office, Storage Area, And A Play Area Accompanied By A Breastfeeding Room. Additionally, The Project Will Integrate A Conjugal Space, Distinct Male & Female Toilet And Bath Facilities With Accommodations For Persons With Disabilities (pwd), A Clinic, And A Prayer Room. Moreover, The Project Will Be Enhanced With A Fire Protection System And A Generator Set, Complete With A Dedicated Generator Room, Painting Works Are Not Included. Approved Budget For The Contract : ₱41,495,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱25,000.00 5. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/ Improvement Of Access Roads Leading To Seaports (kalsada Tungo Sa Paliparan, Riles At Daungan Program - Katuparan) Access Road Leading To Calatagan Port, Calatagan, Batangas Contract Id No. : 25d00052 Contract Location : Batangas Province Scope Of Works : Road Opening And Construction Of Roads For 2 Lanes And 4 Lanes Carriageway Including Construction Of Gabions Slope Protection, Rcpc Drainage Structure And Miscellaneous Structures. Approved Budget For The Contract : ₱175,038,455.00 Net Length : Gravel : 6.77 Lane Km Concrete : 6.77 Lane Km; Slope Protection = 4,230 Sq.m. Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium B License Category : A Cost Of Bidding Documents : ₱50,000.00 6. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/improvement Of Various Infrastructures In Support Of National Security (tatag Ng Imprastraktura Para Sa Kapayapaan At Seguridad Program - Tikas) Construction Of New Cavite Naval Hospital (level 1), Naval Station Pascual Ledesma, Cavite City, Cavite, Phase Ii Contract Id No. : 25d00066 Contract Location : Cavite Province Scope Of Works : Genset Building (2-units) Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - All Suspended Slabs For Roof Deck Architectural - Waterproofing (roof Deck) - Fiber Cement - Ceiling - Cement Floor Finish - 150mm Chb Walls - Louver Type Walls - Wall Plaster Finish - Painting Works (masonry) - Steel Doors And Frames Electrical - Panel Board With Main & Branch Breaker - Wires And Wiring Devices - Lighting Fixtures And Lamps - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) - Grounding System - Wirings - Generators Elevated Water Tank Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - All Suspended Slabs For Roof Decks - Structural Steel For Ladder And Support Architectural - Waterproofing (roof Decks) - Cement Floor Finish - Fiber-cement Ceiling - 150mm Chb Walls - Wall Plaster Finish - Painting Works - Steel Doors Plumbing - Plumbing Line Works - Cold Water Lines - Water Tank - Pumping System Electrical - Panel Board With Main & Branch Breakers - Lighting Fixtures And Lamps - Wires And Wiring Devices - Wirings - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) - Grounding Systems Sewage Treatment Plant Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - Roof Truss, Purlins, And Sagrods - Stp Walls, Mat Foundation, And Slab - Wall Fence Architectural - Cement Floor Finish - Fiber Cement Ceiling - 150mm Chb Walls - Cement Plaster Finish - Painting Works - Louver Doors And Windows - Roofing Works - Railings Plumbing - Sewage Treatment Plant (stp) – Dynamic Sequential Batch Reactor Electrical - Grounding System - Lighting Fixtures And Lamps - Conduit, Boxes And Fittings (conduit Works / Conduit Rough-ins) Mechanical Airconditioning Units For Auxiliary Buildings - Out-patient Department - Dietary - Laundry And Linen - Engineering And Maintenance - Central Waste Storage - Property And Supply - Cadaver Holding Area Plumbing Septic Tanks For Auxiliary Buildings - Out-patient Department - Doctors And Nurses Quarters - Dietary - Laundry And Linen - Engineering And Maintenance - Cadaver Holding Area Structural Steel Stairs For Auxiliary Buildings - Out-patient Department Main Building Plumbing - Plumbing Line Works Electrical - Wirings - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) Mechanical - Ventilation Works Approved Budget For The Contract : ₱96,500,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. For Item Nos. 5 & 6 The Bac Is Conducting The Public Bidding For This Contract Pursuant To Gppb Circular 06-2019 Dated July 17, 2019 (guidelines On The Implementation Of Early Procurement Activities) In Relation To The Provisions Of The Republic Act 9184 And Its Implementing Rules And Regulations (irr). The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8am – 2pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On October 30, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents (amount Indicated On The Above Table). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Will Hold A Pre-bid Conference On November 06, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna And Through Video Conferencing Via Zoom And Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg Which Shall Be Open To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_r4a@dpwh.gov.ph For Electronic Submission On Or Before November 19, 2024 @ 10:00 A.m. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On November 19, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above Or Through Video Conferencing Via Zoom Which Shall Also Be Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg. Late Bids Shall Not Be Accepted. 10. If At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid. 11. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Cheryll C. Antonio - David Bac, Vice Chairperson Chief, Administrative Officer Administrative Division Telephone No. (02) (049) 34810220 Email Address: R4a.procurement@gmail.com Alex B. Virtudazo Bac Secretariat Head Telephone No. (02) (049) 34810215 / 34810225 Email Address: R4a.procurement@gmail.com Department Of Public Works And Highways Regional Office No. Iv-a Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna 13. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph. For Online Bid Submission At Electronicbids_r4a@dpwh.gov.ph. October 29, 2024 Approved By: Sgd Atty. Cheryll C. Antonio - David Chief, Administrative Officer Administrative Division Bac Vice Chairperson

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Iv-a Canlubang Interchange, Brgy. Mayapa, Calamba, Laguna Invitation To Bid 1. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 1. Name Of Contract : Fy2024 Dpwh Infrastructure Program Sustainable Infrastructure Projects Alleviating Gaps (sipag), Major/strategic Public Buildings/facilities Structural And Resilience Program Construction Of Tagaytay Tourist (iconic Tower) Phase 6, Barangay Kaybagal South, Tagaytay City Contract Id No. : 24d00295 Contract Location : Cavite Province Scope Of Works : Structural - Concrete Beams And Girders From Ts-1 To Ts-6 - Suspended Slabs From Ts-1 To Ts-6 - Shear Wall - Retaining Wall - Stairs From Ts-1 To Ts-6 Approved Budget For The Contract : ₱144,750,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 2. Name Of Contract : Fy2024 Dpwh Infrastructure Program Basic Infrastructure Program (bip), Multi-purpose Buildings/facilities To Support Social Services Construction Of Multi-purpose Facilities, Brgy. Kaybagal South, Tagaytay City, Cavite (phase 9) Contract Id No. : 24d00296 Contract Location : Cavite Province Scope Of Works : Structural - All Reinforced Concrete Columns - Stairs From Second Floor To Ts-1 Plumbing - Sanitary And Waterline Rough-ins From Lower Ground Floor To Ts-6 Electrical - Conduits, Boxes, And Fittings Rough-ins - Wires And Wiring Devices Mechanical - Fire Protection Sleeving Works Approved Budget For The Contract : ₱99,000,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 3. Name Of Contract : Fy2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip), Multi-purpose Buildings / Facilities To Support Social Services Construction Of Multi-purpose Facilities, Brgy. Kaybagal South, Tagaytay City, Cavite, (phase 5) Contract Id No. : 24d00297 Contract Location : Cavite Province Scope Of Works : Structural - Foundation Works - Concrete Beams And Girders From Foundation To Mall Roof - Suspended Slabs From Lower Ground Floor To Mall Roof - Shear Wall - Retaining Wall - Stairs From Lower Ground Floor To Mall Roof Approved Budget For The Contract : ₱495,000,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Large B License Category : Aaaa And Aaa Cost Of Bidding Documents : ₱50,000.00 4. Name Of Contract : Structural Improvement Of Public Buildings And Construction Of Evacuation Centers Region Iv-a, Atimonan, Quezon Contract Id No. : 24d00298 Contract Location : Quezon Province Scope Of Works : The Construction Project Entails The Development Of A Permanent Evacuation Center/multi-purpose Covered Court, Incorporating Various Facilities And Features Including A Laundry & Drying Area, Material Recovery Facility, Cistern Tank, Mess Hall Equipped With A Kitchen, Administrative Office, Storage Area, And A Play Area Accompanied By A Breastfeeding Room. Additionally, The Project Will Integrate A Conjugal Space, Distinct Male & Female Toilet And Bath Facilities With Accommodations For Persons With Disabilities (pwd), A Clinic, And A Prayer Room. Moreover, The Project Will Be Enhanced With A Fire Protection System And A Generator Set, Complete With A Dedicated Generator Room, Painting Works Are Not Included. Approved Budget For The Contract : ₱41,495,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱25,000.00 5. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/ Improvement Of Access Roads Leading To Seaports (kalsada Tungo Sa Paliparan, Riles At Daungan Program - Katuparan) Access Road Leading To Calatagan Port, Calatagan, Batangas Contract Id No. : 25d00052 Contract Location : Batangas Province Scope Of Works : Road Opening And Construction Of Roads For 2 Lanes And 4 Lanes Carriageway Including Construction Of Gabions Slope Protection, Rcpc Drainage Structure And Miscellaneous Structures. Approved Budget For The Contract : ₱175,038,455.00 Net Length : Gravel : 6.77 Lane Km Concrete : 6.77 Lane Km; Slope Protection = 4,230 Sq.m. Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium B License Category : A Cost Of Bidding Documents : ₱50,000.00 6. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/improvement Of Various Infrastructures In Support Of National Security (tatag Ng Imprastraktura Para Sa Kapayapaan At Seguridad Program - Tikas) Construction Of New Cavite Naval Hospital (level 1), Naval Station Pascual Ledesma, Cavite City, Cavite, Phase Ii Contract Id No. : 25d00066 Contract Location : Cavite Province Scope Of Works : Genset Building (2-units) Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - All Suspended Slabs For Roof Deck Architectural - Waterproofing (roof Deck) - Fiber Cement - Ceiling - Cement Floor Finish - 150mm Chb Walls - Louver Type Walls - Wall Plaster Finish - Painting Works (masonry) - Steel Doors And Frames Electrical - Panel Board With Main & Branch Breaker - Wires And Wiring Devices - Lighting Fixtures And Lamps - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) - Grounding System - Wirings - Generators Elevated Water Tank Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - All Suspended Slabs For Roof Decks - Structural Steel For Ladder And Support Architectural - Waterproofing (roof Decks) - Cement Floor Finish - Fiber-cement Ceiling - 150mm Chb Walls - Wall Plaster Finish - Painting Works - Steel Doors Plumbing - Plumbing Line Works - Cold Water Lines - Water Tank - Pumping System Electrical - Panel Board With Main & Branch Breakers - Lighting Fixtures And Lamps - Wires And Wiring Devices - Wirings - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) - Grounding Systems Sewage Treatment Plant Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - Roof Truss, Purlins, And Sagrods - Stp Walls, Mat Foundation, And Slab - Wall Fence Architectural - Cement Floor Finish - Fiber Cement Ceiling - 150mm Chb Walls - Cement Plaster Finish - Painting Works - Louver Doors And Windows - Roofing Works - Railings Plumbing - Sewage Treatment Plant (stp) – Dynamic Sequential Batch Reactor Electrical - Grounding System - Lighting Fixtures And Lamps - Conduit, Boxes And Fittings (conduit Works / Conduit Rough-ins) Mechanical Airconditioning Units For Auxiliary Buildings - Out-patient Department - Dietary - Laundry And Linen - Engineering And Maintenance - Central Waste Storage - Property And Supply - Cadaver Holding Area Plumbing Septic Tanks For Auxiliary Buildings - Out-patient Department - Doctors And Nurses Quarters - Dietary - Laundry And Linen - Engineering And Maintenance - Cadaver Holding Area Structural Steel Stairs For Auxiliary Buildings - Out-patient Department Main Building Plumbing - Plumbing Line Works Electrical - Wirings - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) Mechanical - Ventilation Works Approved Budget For The Contract : ₱96,500,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. For Item Nos. 5 & 6 The Bac Is Conducting The Public Bidding For This Contract Pursuant To Gppb Circular 06-2019 Dated July 17, 2019 (guidelines On The Implementation Of Early Procurement Activities) In Relation To The Provisions Of The Republic Act 9184 And Its Implementing Rules And Regulations (irr). The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8am – 2pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On October 30, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents (amount Indicated On The Above Table). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Will Hold A Pre-bid Conference On November 06, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna And Through Video Conferencing Via Zoom And Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg Which Shall Be Open To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_r4a@dpwh.gov.ph For Electronic Submission On Or Before November 19, 2024 @ 10:00 A.m. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On November 19, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above Or Through Video Conferencing Via Zoom Which Shall Also Be Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg. Late Bids Shall Not Be Accepted. 10. If At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid. 11. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Cheryll C. Antonio - David Bac, Vice Chairperson Chief, Administrative Officer Administrative Division Telephone No. (02) (049) 34810220 Email Address: R4a.procurement@gmail.com Alex B. Virtudazo Bac Secretariat Head Telephone No. (02) (049) 34810215 / 34810225 Email Address: R4a.procurement@gmail.com Department Of Public Works And Highways Regional Office No. Iv-a Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna 13. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph. For Online Bid Submission At Electronicbids_r4a@dpwh.gov.ph. October 29, 2024 Approved By: Sgd Atty. Cheryll C. Antonio - David Chief, Administrative Officer Administrative Division Bac Vice Chairperson

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Iv-a Canlubang Interchange, Brgy. Mayapa, Calamba, Laguna Invitation To Bid 1. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 1. Name Of Contract : Fy2024 Dpwh Infrastructure Program Sustainable Infrastructure Projects Alleviating Gaps (sipag), Major/strategic Public Buildings/facilities Structural And Resilience Program Construction Of Tagaytay Tourist (iconic Tower) Phase 6, Barangay Kaybagal South, Tagaytay City Contract Id No. : 24d00295 Contract Location : Cavite Province Scope Of Works : Structural - Concrete Beams And Girders From Ts-1 To Ts-6 - Suspended Slabs From Ts-1 To Ts-6 - Shear Wall - Retaining Wall - Stairs From Ts-1 To Ts-6 Approved Budget For The Contract : ₱144,750,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 2. Name Of Contract : Fy2024 Dpwh Infrastructure Program Basic Infrastructure Program (bip), Multi-purpose Buildings/facilities To Support Social Services Construction Of Multi-purpose Facilities, Brgy. Kaybagal South, Tagaytay City, Cavite (phase 9) Contract Id No. : 24d00296 Contract Location : Cavite Province Scope Of Works : Structural - All Reinforced Concrete Columns - Stairs From Second Floor To Ts-1 Plumbing - Sanitary And Waterline Rough-ins From Lower Ground Floor To Ts-6 Electrical - Conduits, Boxes, And Fittings Rough-ins - Wires And Wiring Devices Mechanical - Fire Protection Sleeving Works Approved Budget For The Contract : ₱99,000,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 3. Name Of Contract : Fy2024 Dpwh Infrastructure Program Convergence And Special Support Program Basic Infrastructure Program (bip), Multi-purpose Buildings / Facilities To Support Social Services Construction Of Multi-purpose Facilities, Brgy. Kaybagal South, Tagaytay City, Cavite, (phase 5) Contract Id No. : 24d00297 Contract Location : Cavite Province Scope Of Works : Structural - Foundation Works - Concrete Beams And Girders From Foundation To Mall Roof - Suspended Slabs From Lower Ground Floor To Mall Roof - Shear Wall - Retaining Wall - Stairs From Lower Ground Floor To Mall Roof Approved Budget For The Contract : ₱495,000,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Large B License Category : Aaaa And Aaa Cost Of Bidding Documents : ₱50,000.00 4. Name Of Contract : Structural Improvement Of Public Buildings And Construction Of Evacuation Centers Region Iv-a, Atimonan, Quezon Contract Id No. : 24d00298 Contract Location : Quezon Province Scope Of Works : The Construction Project Entails The Development Of A Permanent Evacuation Center/multi-purpose Covered Court, Incorporating Various Facilities And Features Including A Laundry & Drying Area, Material Recovery Facility, Cistern Tank, Mess Hall Equipped With A Kitchen, Administrative Office, Storage Area, And A Play Area Accompanied By A Breastfeeding Room. Additionally, The Project Will Integrate A Conjugal Space, Distinct Male & Female Toilet And Bath Facilities With Accommodations For Persons With Disabilities (pwd), A Clinic, And A Prayer Room. Moreover, The Project Will Be Enhanced With A Fire Protection System And A Generator Set, Complete With A Dedicated Generator Room, Painting Works Are Not Included. Approved Budget For The Contract : ₱41,495,000.00 Source Of Funds : Fy 2024 Ra 11975 Regular 2024 Current Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱25,000.00 5. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/ Improvement Of Access Roads Leading To Seaports (kalsada Tungo Sa Paliparan, Riles At Daungan Program - Katuparan) Access Road Leading To Calatagan Port, Calatagan, Batangas Contract Id No. : 25d00052 Contract Location : Batangas Province Scope Of Works : Road Opening And Construction Of Roads For 2 Lanes And 4 Lanes Carriageway Including Construction Of Gabions Slope Protection, Rcpc Drainage Structure And Miscellaneous Structures. Approved Budget For The Contract : ₱175,038,455.00 Net Length : Gravel : 6.77 Lane Km Concrete : 6.77 Lane Km; Slope Protection = 4,230 Sq.m. Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium B License Category : A Cost Of Bidding Documents : ₱50,000.00 6. Name Of Contract : Fy 2025 Dpwh Infrastructure Program Convergence And Special Support Program Construction/improvement Of Various Infrastructures In Support Of National Security (tatag Ng Imprastraktura Para Sa Kapayapaan At Seguridad Program - Tikas) Construction Of New Cavite Naval Hospital (level 1), Naval Station Pascual Ledesma, Cavite City, Cavite, Phase Ii Contract Id No. : 25d00066 Contract Location : Cavite Province Scope Of Works : Genset Building (2-units) Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - All Suspended Slabs For Roof Deck Architectural - Waterproofing (roof Deck) - Fiber Cement - Ceiling - Cement Floor Finish - 150mm Chb Walls - Louver Type Walls - Wall Plaster Finish - Painting Works (masonry) - Steel Doors And Frames Electrical - Panel Board With Main & Branch Breaker - Wires And Wiring Devices - Lighting Fixtures And Lamps - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) - Grounding System - Wirings - Generators Elevated Water Tank Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - All Suspended Slabs For Roof Decks - Structural Steel For Ladder And Support Architectural - Waterproofing (roof Decks) - Cement Floor Finish - Fiber-cement Ceiling - 150mm Chb Walls - Wall Plaster Finish - Painting Works - Steel Doors Plumbing - Plumbing Line Works - Cold Water Lines - Water Tank - Pumping System Electrical - Panel Board With Main & Branch Breakers - Lighting Fixtures And Lamps - Wires And Wiring Devices - Wirings - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) - Grounding Systems Sewage Treatment Plant Structural - Foundation Works: All Isolated Footings And Slab-on-grade - All Concrete Beams And Concrete Columns - Roof Truss, Purlins, And Sagrods - Stp Walls, Mat Foundation, And Slab - Wall Fence Architectural - Cement Floor Finish - Fiber Cement Ceiling - 150mm Chb Walls - Cement Plaster Finish - Painting Works - Louver Doors And Windows - Roofing Works - Railings Plumbing - Sewage Treatment Plant (stp) – Dynamic Sequential Batch Reactor Electrical - Grounding System - Lighting Fixtures And Lamps - Conduit, Boxes And Fittings (conduit Works / Conduit Rough-ins) Mechanical Airconditioning Units For Auxiliary Buildings - Out-patient Department - Dietary - Laundry And Linen - Engineering And Maintenance - Central Waste Storage - Property And Supply - Cadaver Holding Area Plumbing Septic Tanks For Auxiliary Buildings - Out-patient Department - Doctors And Nurses Quarters - Dietary - Laundry And Linen - Engineering And Maintenance - Cadaver Holding Area Structural Steel Stairs For Auxiliary Buildings - Out-patient Department Main Building Plumbing - Plumbing Line Works Electrical - Wirings - Conduit, Boxes, Fittings (conduit Works / Conduit Rough-ins) Mechanical - Ventilation Works Approved Budget For The Contract : ₱96,500,000.00 Source Of Funds : Fy 2025 Nep For Dpwh Infra Program Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : ₱50,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. For Item Nos. 5 & 6 The Bac Is Conducting The Public Bidding For This Contract Pursuant To Gppb Circular 06-2019 Dated July 17, 2019 (guidelines On The Implementation Of Early Procurement Activities) In Relation To The Provisions Of The Republic Act 9184 And Its Implementing Rules And Regulations (irr). The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8am – 2pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On October 30, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents (amount Indicated On The Above Table). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Will Hold A Pre-bid Conference On November 06, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna And Through Video Conferencing Via Zoom And Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg Which Shall Be Open To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_r4a@dpwh.gov.ph For Electronic Submission On Or Before November 19, 2024 @ 10:00 A.m. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On November 19, 2024 @ 10:00 A.m. At Bidding Room, Dpwh Regional Office No. Iv-a, Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above Or Through Video Conferencing Via Zoom Which Shall Also Be Live – Streamed On Youtube Https://www.youtube.com/channel/ucbiu3eadzp_ckg02rjmipfg. Late Bids Shall Not Be Accepted. 10. If At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid. 11. The Department Of Public Works And Highways (dpwh) Regional Office No. Iv-a, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Cheryll C. Antonio - David Bac, Vice Chairperson Chief, Administrative Officer Administrative Division Telephone No. (02) (049) 34810220 Email Address: R4a.procurement@gmail.com Alex B. Virtudazo Bac Secretariat Head Telephone No. (02) (049) 34810215 / 34810225 Email Address: R4a.procurement@gmail.com Department Of Public Works And Highways Regional Office No. Iv-a Canlubang Interchange, Brgy. Mayapa, City Of Calamba, Laguna 13. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph. For Online Bid Submission At Electronicbids_r4a@dpwh.gov.ph. October 29, 2024 Approved By: Sgd Atty. Cheryll C. Antonio - David Chief, Administrative Officer Administrative Division Bac Vice Chairperson

Details: Description Republic Of The Philippines Bids And Awards Committee City Of Dapitan October 10, 2024 Invitation To Bid The City Government Of Dapitan, Through Its Bids And Awards Committee (bac), Invites Interested Parties To Apply For Eligibility And If Found Eligible To Bid For The Following Contract: Contract Id: Pow# 2024-10-02-025 Contract Name: Proposed City Agri-fishery Development And Post-harvest Facility (mega Market And Post Harvest Facility (mega Market And Transportation Hub) Polo, Dapitan City Approved Budget For The Contract (abc): Php 530,697,000.00 (inclusive Of All Applicable Taxes) Part Of The Total Abc Of P530,700,000.00 Source Of Fund: Land Bank Of The Philippines Loan Proceeds (lbp) • Bidders Are Hereby Informed That This Is An Early Procurement Activity (epa) • Prospective Bidders Should Have Expertise In Undertaking A Similar Project Within The Last Three (3) Years With An Amount Of At Least 50% Of The Proposed Project For Bidding. • Bidders / Contractor’s Shall Submit Their Two (2) Copies Separate Sealed Envelopes Containing Their Technical And Financial Documents. • Documents Submitted Must Be In Accordance With The Checklist Provided And Must Have A Corresponding Label Or Name Plates. • The Eligibility Check/screening As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Post Qualification Of The Lowest/single Calculated Bid Shall Be Conducted. • All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provision Of Ra 9184 And Its Implementing Rules And Regulations (irr). The Schedules Of Activities Are Listed As Follows: Bac Activities Schedule Advertisement / Posting October 11 – 18, 2024 Availability And Issuance Of Bidding Documents Oct. 11 – Nov. 05, 2024; 1:30 P.m. Pre-bid Conference October 22, 2024; 2:00 P.m. Deadline For The Submission Of Bids November 05, 2024; 1:30 P.m Bid Evaluation November 05, 2024; 2:00 P.m • Philippine Bidding Documents Will Be Electronically Uploaded To The Philgeps Website Of The City Of Dapitan. (bacdapitan@gmail.com) • Payment For The Philippine Bidding Documents Is A Non – Refundable Amount Of Seventy Five Thousand Pesos Only (php 75,000.00) Payable To The Office Of The City Treasurer, Dapitan City. The City Government Of Dapitan Assumes No Responsibility Whatsoever Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. The City Government Of Dapitan Reserves The Right To Accept Or Reject Any Bid, And To Annul The Bidding Process And Rejects All Bids At Any Time Prior To Award Of Contract, Without Thereby Incurring Any Liability To The Affected Bidder Of Bidders. Sgd.engr. Renmar Terenz E. Draper Cgdh I, Management Information Systems Office Bac Chairman Annex A: Item No. Description Unit Qty. I – A. Preliminaries A.1.1 (8) Provision Of Field Office For The Engineer Month 25.00 (rental Basis) (40-footer Container Van Type With Acu) A.1.1(11) Provision Of Furnitures/fixtures, Equipment Ls 1.00 & Appliances For The Field Office Of The Engineer A.1.1(16) Operation & Maintenance Of The Field Office Month 25.00 For The Engineers B.3 Permits & Clearances Ls 1.00 B.5 Project Billboards And Signboards Each 2.00 B.7(2) Occupational Safety And Health Programs Month 25.00 B.9 Mobilization/demobilization Ls 1.00 B.20 Temporary Fence (corrugated Sheet With Gi Pipe) Ls 1.00 1) Main Building, Meat Market And Fish Market Ii – A Civil Works 803(1)a Structure Excavation (common Soil) Cu.m. 2,800.67 804(1)a Embankment From Structure Excavation Cu.m. 1,660.65 804(1)b Embankment From Borrow Cu.m. 5,163.60 804(4) Gravel Fill Cu.m. 1,090.36 1000(1) Soil Poisoning Ltr. 453.00 Ii – B. Structural Works 1052(4)a1 Precast Concrete Piles, Furnished (400 X400mm-type B) M. 1,744.00 1052(14) Precast Concrete Piles. Driven M. 1,744.00 900(1)a2 Structural Concrete For Footing And Slab On Grade Cu.m. 1,522.60 (ready Mix Concrete, Class A) 900(1)a1 Structural Concrete, For Footing Tie Beam, Column Cu.m. 2,438.98 Suspended Slab, Grider/beam (ready Mix Concrete, Class A) 901(1) Lean Concrete (ready Mix) Cu.m. 44.62 Spcl-1 Post Tensioning For Girder/beam (final: 770kn -1,430kn Ls 1.00 902(1)a Reinforcing Steel (deformed Grade 60 And 40) Kg. 936,369.00 1034(1)b Damp Proofing (polyethylene Sheet, 6mil Sq.m. 6,384.00 1033(1) Metal Deck Panel (0.8mm X 1.008mm) Sq.m. 4,330.00 903(2)b Formworks And Falseworks Sq.m. 12,791.00 1047(2)a Structural Steel (roof Framing) Kg. 68,669.00 1047(2)b Structural Steel (trusses) Kg. 100,327.00 Ii- C. Architectural Works 1027 (1) Cement Plaster Finish Sq.m. 9,159.00 1046(2) 100mm Chb Non-load Bearing (class B, Including Sq.m. 2,343.00 Reinforcing Steel) 1046(2)b 150mm Chb Non-load Bearing (class B, Including Sq.m. 2,237.00 Reinforcing Steel) 1014(1)b2 Prepainted Metal Sheets (rib Type, Long Span, Above Sq.m. 8,055.00 0.427mm Thick 1038(1) Reflective Insulation (10mm Thick, 1-side) Sq.m. 8,055.00 1013(2)b2 Fabricated Metal Roofing Accessory (ga #26, Flashing, Pre-painted L.m. 501.00 1013(2)c2 Fabricated Metal Roofing Accessory (ga# 26 Gutter L.m 783.00 And End Flashings, Pre-painted) Spcl – 3 Fabricated Metal Roofing Accessory (ga# 26, Facia L.m. 783.00 Pre-painted) Spcl-4 Metal Railing (with Stainless Steel Support) L.m. 196.00 Spcl-5 Glass Railing (with Stainless Steel Support) L.m. 274.00 1012(1)c4 Tempered Glass Walls/barriers, Etc. (12mm) Sq.m. 1,264.00 1012(1)a2 Tempered Glass Door (12mm) Sq.m. 43.00 1008(1)d Aluminum Glass Windows (fixed Type) Sq.m. 353.00 1010(2)b Wood Panel Door Sq.m. 19.00 1043(2)b5 Pvc Doors And Frames (100cm X 210cm, W/ Louver) Set 6.00 1053(6) Stair Brass Metal Nosing (2” W/ Finishing) M. 150.00 1004(2)e Finishing Hardware (door Knobs) Set 19.00 1004(2)g Finishing Hardware (hinges) Set 19.00 Spcl – 6 Toilet Partition Door With Accessories Sq.m. 95.00 1018(1)a1 Glazed Tiles And Trims (dry Pressed Tiles (60x60cm) Sq.m. 440.00 1018(2) Homogeneous Porcelain Non-skid (60cmx 60cm) Sq.m. 4,997.00 1018(7) Homogeneous Porcelain Glazed Tiles (60cmx60cm) Sq.m. 2,582.00 1003(1)a1 Ceiling (4.5mm, Metal Frame, Cement Board) Sq.m. 10,414.00 1032(1)a2 Painting Works On Ceiling Sq.m. 10,414.00 1032(1)a Painting Works (masonry/concrete, Interior Sq.m. 4,580.00 1032(1)a Painting Works (masonry/concrete, Exterior Sq.m. 4,580.00 1032(1)c Painting Works (steel, Epoxy Metal Primer & 2-coats Sq.m. 9,391.00 Enamel) Spcl-7 Building Marker (brass/stainless Plate) Ls 1.00 Spcl-8 Wood Cladding Sq.m. 209.00 Spcl-9 Stone Cladding Sq.m. 82.00 Spcl-10 Metal Cladding Sq.m. 300.00 1016(1)a Water Proofing, Cement Base Sq.m. 726.00 Ii – D. Electrical Works 1101(2)a6 3.5mm2 Electric Wire (tw/thhn/thwn2, Stranded M. 49,226.00 1101(2)a7 5.5mm2 Electric Wire (tw/thhn/thwn2, Stranded M 28,400.00 1101(2)a8 8.0mm2 Electric Wire(twthhn/thwn2, Stranded M. 4,950.00 1101(2)a9 14.0mm2 Electric Wire (tw/thhn/thwn2, Stranded M. 16,100.00 1101(2)a10 22.0mm2 Electric Wire(tw/thhn/thwn2, Stranded M. 950.00 1101(2)a13 50.0mm2 Electric Wire (tw/thhn/thwn2, Stranded M. 850.00 1101(2)a15 80.0mm2 Electric Wire (tw/thhn/thwn2, Stranded M. 485.00 1100(30) Conduit Works, Boxes And Fittings Ls 1.00 1100(6)b 20mmø Polyvinyl Chloride (pvc) Pipes Length 7,043.00 1101(6)c 25mmø Polyvinyl Chloride (pvc) Pipes Length 4,491.00 1101(6)d 32mmø Polyvinyl Chloride (pvc) Pipes Length 3,150.00 1101(6)e 40mmø Polyvinyl Chloride (pvc) Pipes Length 68.00 1101(2)a3 Intermediate Metal Conduit (imc, 25mm Diax3mm) Length 120.00 1101(8) Single Pole Wall Switch On One Switch Plate Set 66.00 1101(9) Duplex (2 Single Pole Wall Switches On One Switch Plate Set 66.00 1101(10) Triplex (3 Single Pole Wall Switches On One Switch Plate Set 66.00 1101(21) Duplex Convenience Outlets/receptacle (gt) Set 264.00 Spcl -11 Aircon Outlet With Ground Set 264.00 1102(1)b4 Panel Board With Main Breaker/branches (bolt-in Type, Set 30.00 Nema 3r, Flush/surface Mounted With Ground Lugs), Main 30at, 240v, 2p, Bolt-on Branches 4-20at, 240v, 2p, Bolt-on 1102(1)b4 Panel Board With Main Breaker/branches (bolt-in Type, Set 4.00 Nema 3r, Flush/surface Mounted With Ground Lugs), Main 60at, 240v, 2p, Bolt-on, Branches 3-20at, 240v, 2p, Bolt-on Branches 1-40at, 240v, 2p, Bolt-on 1102(1)b4 Panel Board With Main Breaker/branches (bolt-in Type, Set 2.00 Nema 3r, Flush/surface Mounted With Ground Lugs), Main 50at, 240v, 2p, Bolt-on, Branches 6-20at, 240v, 2p, Bolt-on 1102(1)b4 Panel Board With Main Breaker/branches (bolt-in Type, Set 1.00 Nema 3r, Flush/surface Mounted With Ground Lugs), Main 70at, 240v, 2p, Bolt-on, Branches 2-50at, 240v, 2p, Bolt On 1102(1)b4 Panel Board With Main Breaker/branches (bolt-in Type, Set 2.00 Nema, 3r, Flush/surface Mounted With Ground Lugs), Main 125at, 240v, 2p, Bolt-on, Branches 23 – 30at, 240v, 2p. Bolt-on Branches 1-60at, 240v, 2p, Bolt-on 1102(1)b4 Panel Board With Main Breaker/branches (bolt-in Type, Set 2.00 Nema, 3r, Flush/surface Mounted With Ground Lugs), Main 400at, 240v, 2p, Bolt-on, Branches 20-50at, 240v, 2p, Bolt-on Branches 20-50at, 240v, 2p, Bolt-on Branches 16-20at, 240v, 2p, Bolt-on 1102(1)b4 Panel Board With Main Breaker/branches (bolt-on Type, Set 2.00 Nema 3r, Flush/surface Mounted With Ground Lugs), Main 2000at, 240v, 2p, Bolt-on, Branches 2-1000at, 240v, 2p,bolt-on Branches 1-500at, 240v, 2p, Bolt On Ii – E. Mechanical Works 1202 (1) Automatic Water Sprinkler System (awss) Ls 1.00 1208(1) Fire Alarm System Ls 1.00 Ii – E. Plumbing Works 1002(3)a2 20mmø Polyprophylene Random Copolymer (ppr-c) Pc. 597.00 Pipe (1/2”, Pn20) 1002(3)b2 25mmø Polyprophylene Random Copolymer (ppr-c) Pc. 370.00 Pipe (3/4”, Pn20) 1002(3)c2 32mmø Polyprophylene Random Copolymer (ppr-c) Pc. 295.00 Pipe (1”, Pn20) 1002(8) Plumbing Fixture Ls 1.00 1002(6) Cold Waterlines, Pipes And Fittings Ls 1.00 1001(8) Sewer Line Works (inclusive Of Pvc Pipes And Fittings Ls 1.00 1001(11) Septic Vault Concrete (fc=3500psi, Class B Chb With Unit 2.00 25mm Concrete Plaster Spcl-12 Stub-out Ls 1.00 1001(1)b4 300mmø Concrete Pipe M. 123.00 1001(1)a8 150mmø Pvc Pipe, Series 1000 M. 363.00 1001(6)a Catch Basin (concrete) Unit 42.00 Iii A – Site Development 100(1) Clearing And Grubbing Sq.m. 53,589.00 102(1) Unsuitable Excavation Cu.m 26,785.00 104(2)b Embankment Form Selected Borrow Cu.m. 132,335.00 105(1)a Subgrade Preparation Sq.m. 53,589.00 Iii B – Road Concreting And Drainage 103(1)a Structure Excavation (common Soil) Cu.m. 2,085.00 200(1) Aggregate Subbase Course Cu.m. 1,107.00 311(1) Portland Cement Concrete Pavement, 200mm Thick Sq.m. 5,530.00 Spcl-13 Portland Cement Concrete Pavement, 150mm Thick (side Walk) Cu.m 498.00 500(1)b1 Pipe Culverts, 610mm Dia (rcpc) L.m. 1,158.00 502 Manholes, Inlets And Catch Basin Each 106.00 505(2)a Grouted Riprap Cu.m. 670.00 612(1) Reflectorized Thermoplastic Pavement Markings (white) Sq.m. 174.00 612(2) Reflectorized Thermoplastic Pavement Markings (yellow) Sq.m. 116.00

Details: Description Qty. Description 1 Lot A. General Conditions Complete All Works For The Project “repair And Renovation Of The Office Of Investigation Division, Ciis” Including Supply Of All Materials, Equipment, And Systems, As Well As The Performance Of All Necessary Labor And Processes, In Accordance With The Plans, Specifications, The Bidding Documents, The Terms Of References And Other Related Contract Documents. The Contractor Is Not Limited To The Scope Of Works Listed. He Should Verify All Plans And Actual Conditions For The Necessity Of Work. If The Actual Situation Calls For Demolition, Removal, And Relocation He Shall Include Such And All Concomitant Works To Finish As Part Of The Scope Of Work. Any Discrepancies Found Between The Drawings And Specifications And The Site Conditions Or Any Errors Or Omissions In The Drawings Or Specifications Should Be Clarified With The Architect/consultant/engineer. Should The Contractor Fail To Verify Or Clarify Discrepancies, Errors, Conflicts, Or Omissions In The Drawings And Specifications, It Shall Be Deemed That The Contractor Has Included In The Preparation Of His Bid The Necessary Works, Materials, Or Items Needed To Satisfy The General Scope Of Works. During The Renovation Phase To Completion, The Contractor Shall Deploy A Licensed Civil Engineer And Architect To Supervise And Direct The Work Of His Staff In Carrying Out The Activities Required To Ensure That The Specified Works Are Constructed In Full Accordance With The Approved Contract Documents And Shall Be Responsible For All Aspects Of The Project. B. Scope 1. Mobilization A. Preparation Of Logistics Of Contractor’s Equipment; B. Setting Up Of Temporary Facilities Within The Site; C. Setting Up Of Necessary Water And Power Lines Required For The Project; D. Setting Up Of Temporary Fence Enclosure; E. Installation Of Project Details Tarpaulin Signage (30x20”) With Frame Located At The Front Of The Project Site Location; And F. Inventory Of Items To Turn Over. 2. Demobilization A. Site Demolition And Dismantling Of Existing Concrete Walls, Dry Walls, Ceiling And Electrical Wirings; B. Hauling Of Debris And Materials From The Project Site To The Appropriate Disposal Area; And C. Within 10 Calendar Days Upon Completion Of The Project, The Contractor Shall Submit One (1) Complete Set Of As-built Plans (printed In Blueprinted Paper) Duly Signed And Sealed By The Contractor, Drawn In 24” X 36” Drawing Sheets. 3. Carpentry Works A. Supply And Installation Of 9mm Thk. Ficem Board With Complete Standard Metal Furring Support On All Ceilings As Shown In The Plans And Bill Of Quantities (boq); B. Supply And Installation Of 9mm Thk. Ficem Board With Complete Standard Metal Stud Support On All Drywalls As Indicated In The Plans And Boq; C. Installation Of Fluted Pvc Wall Panel Backdrop As Shown In The Perspective And Boq; And D. Fabrication Of Built-in Cabinets, Shelves And Reception Table As Indicated In The Plans, Perspective And Boq. 4. Painting Works A. All Surface Defects Shall Be Repaired And All Surfaces Shall Be Scraped To Remove Deteriorated Coatings And Other Deleterious Materials. Surfaces Shall Then Be Cleaned With Steam Or With A Commercial Cleaner To Remove All Grease, Oil, And Chemical Residues; B. Prior To Painting Works, Surfaces On Masonry, Wood, And Metal Must Be Free From Any Dirt, Grease, Old Paint, And Rust, Eliminate Loose Or Peeling Paint, And Get Rid Of Rust Deposits Before Applying Primer/putty And Paint Finish; And C. Contractor Shall Ensure That All Delivered Painting Materials To The Work Site Shall Be In Original Containers With Seals And Labels Intact. Containers Shall Not Be Opened Until After They Have Been Inspected By The End-user Or Its Duly Authorized Representative. 5. Finished Hardware A. Supply And Installation Of Tempered Glass Door For The Main Door As Indicated In The Plans And Boq; B. Supply And Installation Of Solid Panel Doors Including Door Jambs And Accessories As Indicated In The Plans And Boq; C. Supply And Installation Of Hidden Door With Pvc Fluted Wall Panel Including Complete Accessories As Indicated In The Plans And Boq; And D. Supply And Installation Of Pvc Doors For Comfort Rooms With Complete Accessories As Specified In The Plans And Boq. 6. Floor And Tiling Works Supply And Installation Of 60cm X 60cm Floor Tiles Including Wall Tiles For Comfort Rooms As Specified In The Plans And Boq. 7. Plumbing Works Replacement Of Water Closets, Wall-hung Lavatories, Urinal, Pipes And Fittings With Complete Accessories As Indicated In The Plans And Boq. 8. Electrical Works A. Supply And Installation Of All Lighting Fixtures As Shown On The Reflected Ceiling Plan (rcp) Or As Specified By The Architect And/or End-user’s Representative; B. Supply And Installation Of Wiring Devices, Switches, Outlets, And Accessories As Shown In The Plans And Boq; And C. Supply And Installation Of Wiring Cables And Roughing-ins As Per Plans And Boq. 9. Concrete And Masonry Works Provision Of Concrete Walls For The Interview Room As Shown In The Plans And Boq. 10. Others Supply And Installation Of 2-pc. 700 Mm Diameter Boc Seals As Indicated In The Plans And Boq. 11. Permits, Licenses, And Taxes A. The Contractor Shall Secure And Pay All Permits, Fees, Licenses, Taxes, Etc. Necessary For The Execution Of The General Construction Works For The Project. B. The Contractor Shall Prepare The Complete Contract Documents Consisting Of Detailed Designs And Construction Drawings (architectural, Electrical, Structural, Mechanical, Plumbing/sanitary, Electronic And Communication Layout) In Accordance With The Municipal Engineering Office For The Building Permit Purposes; And C. The Contractor Shall Prepare A Weekly Progress Report Which Shall Include An Overall Progress Chart Based On Actual Physical Accomplishment Of Construction Work And A Progress Chart Based On Actual Value Of Accomplished Construction Work, Among Others. 12. Certification A. The Contractor Must Possess At Least A Pcab License Category C&d, Size Range Small B; B. The Contractor Shall Submit A Certificate Of Satisfactory Performance Issued By The Bureau Of Customs (boc) (for Entities With Previous/ongoing Contract/s With The Boc); In The Absence Of Contract/s With Boc, From Any Other Office/agency; And C. The Contractor Shall Submit An International Organization For Standardization (iso 9001:2015) Certificate In Construction And Contracting Issued By An Iso Certifying Body. 13. Terms Of Payment The Billing Schedule Specified In The Table Below Shall Be Followed By The Contractor: Order Of Billing Project Accomplishment Percentage First (1st) Billing At Least 50% Of The Work Has Been Accomplished Second (2nd) Billing At Least 80% Of The Work Has Been Accomplished Final Billing 100% Accomplished C. Specifications All Drawings, Whether Small Scale Or Detailed Drawings, Are Intended To Work In Unison With The Specifications And To Form Part Thereof, When Figures Are Given, They Are To Be Followed In Preference To Measurement By Scale. Anything Shown In The Drawings But Not Mentioned In The Specifications (or Vice-versa) Or Anything Not Expressively Set Forth In Either (but Which Is Reasonably Implied) Shall Be Furnished And Installed As Thought Specifically Shown In Mentioned Both. 1. Pre-construction Phase Guidelines A. A Joint Site Inventory Must Be Conducted And Signed By The Contractor, Gsd, And End-user; B. The Contractor Must Submit To Gsd His Program Evaluation Review Technique (pert) Chart/critical Path Method (cpm) Chart In Gantt Chart Form Before The Start Of The Project; C. The Contractor Must Submit To Gsd The List Of Manpower That Shall Be Utilized For The Project Along With Their Respective Designations/roles And Corresponding Qualifications. The Most Notable Figure For The Project Must Be The Project Manager, Preferably An Architect Or Engineer; And D. The Minimum Work Experience Requirements For Key Personnel Are The Following: Key Personnel Requirement Relevant Experience Project-in-charge Bachelor Of Science In Architecture/bachelor Of Science In Civil Engineer (licensed Civil Engineer/ Licensed Architect) And Building Construction Experience Five (5) Years Registered Electrical Engineer Registered Electrical Engineer And Building Construction Experience Five (5) Years Master Plumber Registered Master Plumber And Building Construction Experience Five (5) Years Safety Officer Building Construction Experience, National Certification Level Ii And Construction Occupational Safety And Health (cosh) Certificate Five (5) Years Foreman Building Construction Experience Five (5) Years Carpenter Building Construction Experience Five (5) Years Welder Building Construction Experience And National Certification Level Ii Five (5) Years Plumber Building Construction Experience And National Certification Level Ii Five (5) Years Electrician Building Wiring Installation Experience And National Certification Level Ii Five (5) Years Painter Building Construction Experience Five (5) Years Mason Building Construction Experience Five (5) Years Tile Setter Building Construction Experience Five (5) Years Laborer Building Construction Experience Three (3) Years Warehouseman Building Construction Experience Three (3) Years E. The Minimum Major Equipment Requirements Are The Following: Equipment/tools Number Of Unit/s 1 4x2 Mini Dump Truck (4 Cubic Meter Capacity) 1 Lot/ As Necessary 2 6-wheeler Elf Truck (18ft Length) 1 Lot/ As Necessary 3 One Bagger Concrete Mixer 1 Unit 4 Chipping Gun 1 Unit 5 Jackhammer 1 Unit 6 Rotary Hammer Drill 2 Units 7 Electric Drill 2 Units 8 Cut Off Machine 1 Unit 9 Electric Jig Saw 1 Unit 10 Circular Saw 1 Unit 11 Table Saw 1 Unit 12 Angle Grinder 2 Units 13 300a Welding Machine 2 Units 14 Megger Test Equipment 1 Unit 15 Multi-tester Equipment 1 Unit 16 Self-levelling Laser 2 Units 17 Nail Gun 1 Unit 18 Paint Sprayer 2 Units 19 Air Compressor 2 Units 20 Pipe Fusion Welding Machine 1 Unit 21 Tile Cutter Machine 1 Unit 22 Vacuum Cleaner 2 Units 23 Electric Sander 1 Unit 24 Wood Router 1 Unit 25 Pressure Washer 1 Unit 26 Construction Ladder 1 Lot 27 Scaffolding And Accessories 1 Lot 28 Personal Protective Equipment (ppe) 1 Lot 2. Implementation Phase Guidelines A. The Contractor Must Submit Weekly Progress Reports As Mentioned In Item B.11.c Of This Document Including Photo Documentation And Weather Updates To Gsd; B. The Contractor Must Submit Weekly Their Daily List Of Manpower; C. The Project Manager, Who Must Be A Technical Professional, Must Be Present At The Project Site At All Times To Properly Monitor/oversee The Project As Technical Representative Of The Contractor’s Side; D. Boc, Thru Its Technical Inspection And Acceptance Committee (tiac) For Civil Works, Reserves Its Right To Conduct Monitoring Inspections, Aside From The Inspections For Billing Purposes. The Project Manager Must Always Be Present, Especially During Inspections For Billing Purposes, To Ensure Proper Communication Instead Of Relying On The Foreman Or Laborers Only; E. The Approved Floor Plan And Perspective Drawings Must Be Posted On A Wall Or Board So That They Are Readily Available And Visible Whenever Necessary; F. Materials To Be Used In The Construction/renovation Must Follow Those Specified In This Document (scope Of Work), The Drawings, And/or The Boq. The Contractor Must First Secure Proper Approval Of Materials To Be Installed Via A Written Document Duly Approved By Both The End-user And Gsd. Any Change In Materials Must Also Have Proper Indorsement Thereafter. G. All Testings/activities (e.g., Waterproofing Test, Leak Test, Slump Test, Continuity Test, Insulation Resistance Test, Earthing Test, Pest Control Chemical Certificate, Etc.) Conducted By The Contractor Must Be Done With The Presence Of A Gsd Engineer/architect. Corresponding Reports Must Be Submitted To Gsd For Documentation And Validation Within Three (3) Calendar Days Upon Completion Of The Said Testing/activity; And H. Punchlisting Shall Be Conducted Upon 95.00% Completion As Ascertained By The Tiac. 3. Carpentry Works All Wood Shall Be Treated With Colorless Anti-termite Wood Preservatives. A. Ceiling Ceiling Works Shall Utilize 9mm Ficem Board With Complete Standard Metal Furring Supports. B. Wall Drywall Partition Use 9mm Thk. Ficem Board With Complete Standard Metal Studs Supports. 4. Tiling Works Tiles And Their Accessories Must Be Free From Defects That Affect Their Quality, Appearance, And Strength. All Tiles Shall Be Set To Correct Grades And Levels True To Lines, Laid Even. Submit Material For Approval. Use 60 X 60 Cm Floor And Wall Tiles In All Areas, Including The Wall Tiles For The Comfort Rooms. Use Heavy-duty Tile Adhesive And Tile Grout Joint Filler. Use T-trim/threshold Between Two Different Tile Materials. 5. Painting Application Of Plastered Paint Finish On All Interior And Exterior Walls/partitions, Ceiling, And Concrete Surfaces Within The Scope Of The Interior And Exterior Renovation Works Unless Otherwise Indicated In The Plans And Specifications. A. All Paint And Accessories, Materials Incorporated In Or Forming A Part Thereof Shall Be Subject To The Approval And Selection Of Color, Tint, Finish, Or Shade By The Architect; B. Painting Of All Surfaces, Except Otherwise Specified Shall Be (3) Coats Work, One Primer And Two Finish Coats; C. All Paint Materials Shall Meet The Requirements Of Paint Materials Under Class A; D. All Surfaces To Be Painted Shall Be Examined Carefully Before Beginning Any Painting Work, And Other Trade Works Installed In Workmanship Condition To Receive Paint Or Ant Particular Finish; E. All Paint Materials Shall Meet The Requirements Of The Specifications Set By Gsd And Shall Be Delivered On The Job In The Original Container, With Labels Intact And Seal Unbroken. F. Concrete Surfaces; Latex Paint Shall Be Used, And Preparation And Application Must Be According To The Manufacturer’s Instructions. G. Drywalls; Latex Paint Shall Be Used, And Preparation And Application Must Be According To The Manufacturer’s Instructions. Use Spray Paint For Cubicle Partition Only; H. Wooden And Metal Surfaces; Automotive Lacquer Paint Shall Be Used, And Preparation And Application Must Be According To The Manufacturer’s Instructions. Use Spray Paints; And I. Color Pigments Shall Be Used To Produce The Exact Shades Of Paint, Which Shall Conform To The Approved Color Scheme. 6. Electrical Works A. Quality Assurance - All Materials To Be Used Shall Be New And Shall Conform With The Reference Codes And Standards. Use Of Materials Shall Be Further Be Governed By Other Requirements, Impose On Other Sections Of These Specifications. Materials Shall Be Subjected To The Necessary Tests For Their Suitability Where Required; B. Alternate Materials - Use Of Any Material, Not Specified In These Specifications May Be Allowed Provided Such Alternate Has Been Approved By The Agency In Accordance With Generally Accepted Standards; C. Identification Of Materials - Each Length Of Pipe, Fitting, Box, Fixture, And Device Used In The Electrical System Shall Have Cast, Stamped Or Indelibly Marked On It The Manufacturer's Trademark Or Name, The Weight, Type And Classes Or Product When So Required By The Standards Mentioned Above; D. Wires And Cables; I. All Wires Shall Be Copper, Soft-drawn And Annealed, Shall Be Of 99% Conductivity, Shall Be Smooth And True And Of The Cylindrical Form And Shall Be Within +/-1% Variation Of The Actual Size Called For. Ii. Wires And Cables Shall Be Plastic Insulated For 600 Volts Working Pressure, Type Thermoplastic High Heat-resistant Nylon-coated (thhn) Unless Otherwise Noted. Iii. All Wires And Cables Shall Be Color Coded, Color-coding Of Wires Are As Follows: (a) Line 1 – Red (b) Line 2 – Yellow (c) Line 3 – Blue Iv. Minimum Size Of Branch Circuit Wire Shall Be 3.5 Mm2 Thhn For Power And Lighting System With 3.5mm2 Thhn Minimum Ground Wire. V. Wires 3.5 Mm2 And Bigger Shall Be Stranded. E. Switches; And I. Switches Shall Be Flush Mounted And Rated At 15 Amperes (amps), 250 Volts, One Way, Three-way As Required. Ii. Switches Shall Be Quiet Type, Spring Loaded, And The Cover Plates Shall Be Subject To The Approval Of The Architect And The Engineer. F. Receptacles I. Receptacles Shall Be Duplex, Flush Mounted And Rated At 10 Amps., 250 Volts, Parallel Or Tandem Slots With Grounding Slots As Required. All 110 Volts Receptacle Outlets Shall Be Rated 15 Amps, 120 Volts. 220 Volts Receptacle Outlets Shall Be Distinct From The 110 Volts Receptacle Outlets In Terms Of Configurations And Shall Be Provided With Markings. Ii. Cover Plates Shall Be Subject To The Approval Of The Architect And The Engineer. Stainless Steel Cover Plate Shall Be Required On All Wet Or Damped Area. Iii. All Receptacle Outlets With Ground-fault Circuit Interrupters (gfci) Shall Be Rated For 250 Volts Application With A Sensitivity Setting Of 300 Milliamps. 7. Plumbing Works A. All Works, Comply With The Requirements And Provisions Of The National Plumbing Code Of The Philippines; B. All Fixtures Shall Be Separately Trapped. The Traps Shall Be Placed As Near As Possible To The Fixtures; And C. No Fixtures Shall Be Double-trapped. Interested Suppliers Are Required To Submit Original/certified True Copy Of The Following: 1) Valid And Current Mayor’s Permit, (in Case Of Expired Mp/bp, Submit Copy Of Recently Expired Permit And Official Receipt As Proof Of Renewal), 2) Dti/sec Registration (for Partnerships/corporations, Attach General Information Sheet & Articles Of Incorporation), 3) Philgeps Registration Certificate, 4) Original Duly Signed Omnibus Sworn Statement (oss) And Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder, 5) Latest Income/business Tax Return, 6) Pcab License (license Category - C & D, Size Range - Small B), 7) Certificate Of Satisfactory Performance Issued By The Bureau Of Customs (for Contracts Entered Into With The Bureau) Or From Any Other Office/agency, If The Former Is Not Applicable And 8) Duly Signed Price Quotation Form (annex “a”). All Must Be Properly Signed And Sealed. Must Be Submitted In Hard Copy. Submission Of Quotation And Eligibility Documents In Hard Copy Is On Or Before November 04, 2024, 10:00 A.m., At General Services Division (gsd), Ground Floor, Ocom Building, Port Area, Manila. Award Of Contract Shall Be Made To The Lowest Quotation, Which Complies With The Minimum Description As Stated Above And Other Terms And Conditions Stated In The Price Quotation Form. Awarded Bidder Must Secure Performance Security/performance Bond 30% Of Contract Price Upon Receipt Of Notice Of Award. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Bidder Or His/her Duly Authorized Representative/s. The Boc Reserves The Right To Accept Or Reject Any Or All Quotations And To Impose Additional Terms And Conditions As It May Deem Proper.

Details: Description Qty. Description 1 Lot A. General Conditions Complete All Works For The Project “repair And Renovation Of Ocom Electrical Room Including Roofing Works” Including Supply Of All Materials, Equipment, And Systems, As Well As The Performance Of All Necessary Labor And Processes, In Accordance With The Plans, Specifications, The Bidding Documents, The Terms Of References And Other Related Contract Documents. The Contractor Is Not Limited To The Scope Of Works Listed. He Should Verify All Plans And Actual Conditions For The Necessity Of Work. If The Actual Situation Calls For Demolition, Removal, And Relocation He Shall Include Such And All Concomitant Works To Finish As Part Of The Scope Of Work. Any Discrepancies Found Between The Drawings And Specifications And The Site Conditions Or Any Errors Or Omissions In The Drawings Or Specifications Should Be Clarified With General Services Division (gsd) Architect /engineer. Should The Contractor Fail To Verify Or Clarify Discrepancies, Errors, Conflicts, Or Omissions In The Drawings And Specifications, It Shall Be Deemed That The Contractor Has Included In The Preparation Of His Bid The Necessary Works, Materials, Or Items Needed To Satisfy The General Scope Of Works. B. Scope 1. Mobilization A. Preparation Of Logistics Of Contractor’s Equipment; B. Setting Up Of Temporary Facilities Within The Site; C. Setting Up Of Necessary Water And Power Lines Required For The Project; D. Setting Up Of Temporary Fence Enclosure; E. Installation Of Project Details Tarpaulin Signage (30x20”) With Frame Located At The Front Of The Project Site Location; And F. Inventory Of Items To Turn-over. 2. Site Works A. Site Demolition And Dismantling; And B. Hauling Of Debris. 3. Structural Works A. Supply, Fabrication And Installation Of Roof Beam As Indicated In The Plans And Bill Of Quantities (boq); B. Supply, Fabrication, And Installation Of Steel Trusses; And C. Supply, Fabrication, And Installation Of Roof. 4. Masonry Works A. Supply And Laying Of 4” Non-bearing Concrete Hollow Block (chb) Including Plastering; B. Concrete Pouring Of Stairs Including Concrete Topping As Indicated In The Plan; And C. Restoration Of Demolished/dismantled Concrete Plant Boxes, Sidewalk, And Road For The Installation Of Downspout Pvc Pipe. 5. Carpentry Works A. Supply And Installation Of Ceiling Board With Complete Standard Metal Furring Support On All Ceilings As Indicated In The Plans And Boq; And B. Supply And Installation Of Ceiling Eaves Ventilation Grilles With Metal Mesh; 6. Doors And Windows A. Supply And Installation Of All Doors With Corresponding Door Jambs As Indicated In The Plans And Boq; 7. Electrical Works A. Dismantling Of Existing Lighting Fixture, Wiring Devices, Roughing-ins/raceways, And Accessories; B. Supply And Installation Of Complete Electrical System As Indicated In The Plans; C. Supply And Installation All Lighting Fixtures As Shown On The Reflected Ceiling Plan (rcp) Or As Specified By The Architect And/or End-user’s Representative; D. Supply And Installation Of Wiring Devices, Switches, Outlets, And Accessories As Indicated In The Plans And Boq; E. Supply And Installation Of Wiring Cables And Roughing-ins As Per Plans And Boq; F. All Exposed Existing Electrical Wirings, Data Cable And Telephone Line Inside The Building Shall Be Covered Using Upvc Moldings, Use Appropriate Size To Accommodate The Wires And Cables With Proper Insulation, Do Not Combine The Electrical Wire, Data Cable And Telephone Line On The Same Raceways; G. Supply And Installation Of Cable Trunking With Cover, Distribution Board Dead Front And Door As Per Existing Panel Board. H. Complete Testing And Commissioning Of All Electrical Lighting, Power And Auxiliary Systems Using Valid Calibrated Test Equipment’s With Gsd Representative; I. Submission Of All Test Reports; J. All Wiring Devices (convenience Outlet, Lights, Switches, And Data/tel) And Distribution Boards/sub-main Distribution Board Shall Be Labelled Using Labelling Machine As Per Electrical Design Plan; And K. Securing Of Electrical Wiring Permit And Certificate Of Electrical Inspection. 8. Plumbing Works A. Installation Of New Downspout; B. Tapping Of New Downspout To The Nearest Drainage Line; And C. Any Necessary Fittings And Accessories Not Indicated In The Plans Shall Be Provided To Complete The Installation. 9. Painting Works A. All Surface Defects Shall Be Repaired, And All Surfaces Shall Be Scraped To Remove Deteriorated Coatings And Other Deleterious Materials. Surfaces Shall Then Be Cleaned With Steam Or With A Commercial Cleaner To Remove All Grease, Oil, And Chemical Residues; B. Prior To Painting Works, Surfaces On Masonry, Wood, And Metal Must Be Free From Any Dirt, Grease, Old Paint, And Rust, Eliminate Loose Or Peeling Paint, And Get Rid Of Rust Deposits Before Applying Primer/putty And Paint Finish; C. Painting Of Floor, Walls, And Ceiling As Indicated In The Plans And Boq; And D. Contractor Shall Ensure That All Delivered Painting Materials To The Work Site Shall Be In Original Containers With Seals And Labels Intact. Containers Shall Not Be Opened Until After They Have Been Inspected By The End-user Or Its Duly Authorized Representative. 10. Airconditioning Works A. Relocation Of Existing Air-cooled Condensing Unit (accu) Including Installation Of New Copper Tubing With Insulation, Wiring, Fan Coil Unit (fcu) Drain Including Tapping. 11. Demobilization A. Turn-over Of Items Covered By Inventory Submitted During Mobilization; B. General Site Cleaning; C. Submit Working Drawings (as-built Plan) Of The Following: I. Architectural – Signed And Sealed By Registered And Licensed Architect Only. Ii. Structural – Signed And Sealed By Registered Civil Engineer Only. Iii. Electrical – Signed And Sealed By Professional Electrical Engineer Only. Iv. Electronics – Signed And Sealed By Professional Electronics And Communication Engineer Only. V. Plumbing – Signed And Sealed By Registered Sanitary Engineer Or Registered Master Plumber Only. D. Hauling Of Debris And Materials From The Project Site To The Appropriate Disposal Area; And E. Removal And Hauling Of Tools And Equipment From The Project Site. 12. Permits, Licenses, And Taxes A. The Contractor Shall Secure And Pay All Permits, Fees, Licenses, Taxes, Etc. Necessary For The Execution Of The General Construction Works For The Project. B. The Contractor Shall Prepare The Complete Contract Documents Consisting Of Detailed Designs And Construction Drawings (architectural, Electrical, Structural, Mechanical, Plumbing/sanitary, Electronic And Communication Layout) In Accordance Needed By The Municipal Engineering Office For The Building Permit Purposes; And C. The Contractor Shall Prepare A Weekly Progress Report Which Shall Include An Overall Progress Chart Based On Actual Physical Accomplishment Of Construction Work And A Progress Chart Based On Actual Value Of Accomplished Construction Work, Among Others. 13. Certifications A. The Contractor Must Possess At Least A Pcab License Category C&d, Size Range Small B; B. The Contractor Shall Submit A Certificate Of Satisfactory Performance Issued By The Bureau Of Customs (boc) (for Entities With Previous/ongoing Contract/s With The Bureau); In The Absence Of Contract/s With Boc, From Any Other Office/agency; And C. The Contractor Shall Submit An International Organization For Standardization (iso 9001:2015) Certificate In Construction And Contracting Issued By An Iso Certifying Body. 14. Payment Terms The Schedule Of Billing Specified In The Table Below Shall Be Followed By The Contractor: Order Of Billing Project Accomplishment Percentage First (1st) Billing At Least 50% Of The Work Has Been Accomplished Second (2nd) Billing At Least 80% Of The Work Has Been Accomplished Final Billing 100% Accomplished C. Specifications All Drawings, Whether Small Scale Or Detailed Drawings, Are Intended To Work In Unison With The Specifications And To Form Part Thereof, When Figures Are Given, They Are To Be Followed In Preference To Measurement By Scale. Anything Shown In The Drawings But Not Mentioned In The Specifications (or Vice-versa) Or Anything Not Expressively Set Forth In Either (but Which Is Reasonably Implied) Shall Be Furnished And Installed As Thought Specifically Shown In Mentioned Both. 1. Pre-construction Phase Guidelines A. A Joint Site Inventory Must Be Conducted And Signed By The Contractor, Gsd, And End-user; B. The Contractor Must Submit To Gsd His Program Evaluation Review Technique (pert) Chart/critical Path Method (cpm) Chart In Gantt Chart Form, Manpower Schedule And Equipment/tools Utilization Schedule Before The Start Of The Project; C. The Contractor Must Submit To Gsd The List Of Manpower That Shall Be Utilized For The Project Along With Their Respective Designations/roles And Corresponding Qualifications. The Most Notable Figure For The Project Must Be The Project Manager, Preferably An Architect Or Engineer; And D. The Minimum Work Experience Requirements For Key Personnel Are The Following: Key Personnel Requirement Relevant Experience Project-in-charge Bachelor Of Science In Architecture/bachelor Of Science In Civil Engineer (licensed Civil Engineer/ Licensed Architect) And Building Construction Experience Five (5) Years Safety Officer Building Construction Experience, National Certification Level Ii And Construction Occupational Safety And Health (cosh) Certificate Three (3) Years Foreman Building Construction Experience Five (5) Years Carpenter Building Construction Experience Five (5) Years Welder Building Construction Experience And National Certification Level Ii Five (5) Years Plumber Building Construction Experience And National Certification Level Ii Five (5) Years Electrician Building Wiring Installation Experience And National Certification Level Ii Five (5) Years Painter Building Construction Experience Five (5) Years Mason Building Construction Experience Five (5) Years Laborer Building Construction Experience Three (3) Years Warehouseman Building Construction Experience Three (3) Years E. The Minimum Major Equipment Requirements Are The Following: Equipment/tools Number Of Unit/s 1 4x2 Mini Dump Truck (4 Cubic Meter Capacity) 1 Lot/ As Necessary 2 6-wheeler Elf Truck (18ft Length) 1 Lot/ As Necessary 3 Chipping Gun 1 Unit 4 Rotary Hammer Drill 2 Units 5 Electric Drill 2 Units 6 Cut Off Machine 1 Unit 7 Angle Grinder 2 Units 8 300a Welding Machine 2 Units 9 Multi-tester Equipment 1 Unit 10 Self-levelling Laser 2 Units 11 Paint Sprayer 2 Units 12 Air Compressor 2 Units 13 Pipe Fusion Welding Machine 1 Unit 14 Vacuum Cleaner 2 Units 15 Electric Sander 1 Unit 16 Pressure Washer 1 Unit 17 Construction Ladder 1 Lot 18 Scaffolding And Accessories 1 Lot 19 Personal Protective Equipment (ppe) 1 Lot 2. Implementation Phase Guidelines A. The Contractor Must Submit Weekly Progress Reports As Mentioned In Item B.12.c Of This Document Including Photo Documentations And Weather Update To Gsd; B. The Contractor Must Submit Weekly Their Daily List Of Manpower; C. The Project Manager, Who Must Be A Technical Professional, Must Be Present At The Project Site At All Times To Properly Monitor/oversee The Project As Technical Representative Of The Contractor’s Side; D. Boc, Thru Its Technical Inspection And Acceptance Committee (tiac) For Civil Works, Reserves Its Right To Conduct Monitoring Inspection, Aside From The Inspections For Billing Purposes. The Project Manager Must Always Be Present, Especially During Inspections For Billing Purposes, To Ensure Proper Communication Instead Of Relying On The Foreman Or Laborers Only; E. The Approved Floor Plan And Perspective Drawings Must Be Posted On A Wall Or Board So That They Are Readily Available And Visible Whenever Necessary; F. Materials To Be Used In The Construction/renovation Must Follow Those Specified In This Document (scope Of Works), The Drawings, And/or The Boq. The Contractor Must First Secure Proper Approval Of Materials To Be Installed Via A Written Document Duly Approved By Both The End-user And Gsd. Any Change In Materials Must Also Have Proper Indorsement Thereafter. G. All Testings/activities (e.g., Waterproofing Test, Leak Test, Slump Test, Continuity Test, Insulation Resistance Test, Earthing Test, Pest Control Chemical Certificate, Etc.) Conducted By The Contractor Must Be Done With The Presence Of A Gsd Engineer/architect. Corresponding Reports Must Be Submitted To Gsd For Documentation And Validation Within Three (3) Calendar Days Upon Completion Of The Said Testing/activity; And H. Punchlisting Shall Be Conducted Upon 95.00% Completion As Ascertained By The Tiac. 3. Structural Steel A. All Structural Steel And Miscellaneous Metals Shall Conform To American Society For Testing And Materials (astm) Specification Designation For Carbon Steel With A Yield Strength Of 36,000 Pounds Per Square Inch (psi) (a36) Unless Otherwise Noted And Shall Be Fabricated And Erected In Accordance With The American Institute Of Steel Construction (aisc) Specification For The Design, Fabrication And Erection Of Structural Steel; B. All Welding Works Shall Comply With American Welding Society (aws) Specifications Standard And Performed By Certified Welders. All Welding Shall Be Performed By Electric Arc Process And Shall Be Done Using Approved Electrodes As Required By The Building Code. Welds Are Designed For Full Stress; C. Apply Two Coats Of Epoxy Primer For All Structural Shapes Prior To Erection, Repaint Areas Affected By Welding Works; And D. All Bolts, Screw Or Reinforced Bar That Will Be Drilled On Concrete Slab, Column, Wall, And Beams Shall Be Coated In Structural Epoxy Before Installation. I. Roof Beam Use 2x4”x2.0mm Tubular Steel Ii. Roof Framing Use 2”x6.0mm(top And Bottom) And 1.5”x6.0mm(web Members) Angle Bar Steel For Truss With 2x3”x2.0mm Tubular Steel Spaced At 400mm From Bottom Up To Apex Of The Roof Connected By 1.5”x6.0mm Angle Bar As A C-purlins Connector, 10mm Ø Round Bar For Sagrod In Between C-purlins Spaced At 1.2m On Center And Fascia Board With Angle Bar Frame. Iii. Roof Use Gauge #24 Longspan Prepainted Corrugated Type For Roof, Gauge#24 Prepainted For Gutter And Flashing And 10mm Double Foil For Insulation. 4. Masonry A. 4” Chb Shall Have A Minimum Plaster Thickness Of ½’’ On Both Side; B. Wall Reinforcement Shall Be 10mm Diameter Deformed Bar Spaced At Every Two Layers Of Chb Horizontally And 600mm Vertically; C. Cement Shall Be Standard Portland Cement, Astm C, 150 – 68 Types 1; D. Mixture Of Mortar Shall Be Class C: One (1) Part Portland Cement And Four (4) Parts Sand Volume; And E. Mixture Of Concrete Topping Shall Be One (1) Part Portland Cement And Two (2) Parts Sand Volume. 5. Carpentry Works A. Ceiling Use 12mm Mr Gypsum Board For All Toilet, 6mm Fiber Cement Board For The Outside Eaves , 19x50x0.5mm Double Furring Spaced @ 400mm On Center, 12x38x0.8mm Carrying Channel Spaced @ 1.2m On Center, 25x25x0.5mm Wall Angle Along Perimeter Of The Area As Shown/indicated In The Plans And Boq. 6. Door A. Door I. Use 1000x2100 - 40mm Thk Fire Rated Single Swing Steel Door On 2x5" Steel Door Jamb Ii. Unless Otherwise Specified And Approved, Brass, Chromed Plated Loose Pin Hinges, Finely Finished. Iii. At Least Four (4) Pieces Of Hinges Per Leaf Of Doors For 2.10 Meters Height. Use Heavy Duty Ball Bearing Hinges Or Approved Equal. Iv. All Doors Shall Be Equipped With High Grade, Heavy Duty Or Standard Cylindrical Locksets, Door Closer And Stopper. (submit Material And Accessories For Approval). 7. Painting Application Of Plastered Paint Finish On All Interior And Exterior Walls/partitions, Ceiling, And Concrete Surfaces Within The Scope Of The Interior And Exterior Renovation Works Unless Otherwise Indicated In The Plans And Specifications. A. All Paint And Accessories, Materials Incorporated In Or Forming A Part Thereof Shall Be Subject To The Approval And Selection Of Color, Tint, Finish, Or Shade By The Architect; B. Painting Of All Surfaces, Except Otherwise Specified Shall Be (3) Coats Work, One Primer And Two Finish Coats; C. All Paint Materials Shall Meet The Requirements Of Paint Materials Under Class A; D. All Surfaces To Be Painted Shall Be Examined Carefully Before Beginning Any Painting Work, And Other Trade Works Installed In Workmanship Condition To Receive Paint Or Ant Particular Finish; E. All Paint Materials Shall Meet The Requirements Of The Specifications Set By Gsd And Shall Be Delivered On The Job In The Original Container, With Labels Intact And Seal Unbroken; F. Wall Elastomeric Paint Shall Be Used, And Preparation And Application Must Be According To The Manufacturer’s Instructions; G. Ceiling Flat Latex Paint Shall Be Used, And Preparation And Application Must Be According To The Manufacturer’s Instructions; H. Floor Rubber Solvent-based Coating Paint Shall Be Used, And Preparation And Application Must Be According To The Manufacturer’s Instructions; I. Metal Surfaces; Automotive Lacquer Paint Shall Be Used, And Preparation And Application Must Be According To The Manufacturer’s Instructions. Use Spray Paint; And J. Color Pigments Shall Be Used To Produce The Exact Shades Of Paint, Which Shall Conform To The Approved Color Scheme. 8. Plumbing Works A. The Work Covered By This Section Consists Of Furnishing All Materials, Labor, Tools, And Equipment In Performing All Necessary Operations For The Installation Of The Complete Plumbing System Of Applicable Drawings. All Plumbing Works Shall Conform To The National Plumbing Code Of The Philippines; B. Drainage Pipe Shall Be Pvc Series 1000; And C. Use 4” Pvc Pipe For Downspout. 9. Electrical Works A. Quality Assurance - All Materials To Be Used Shall Be New And Shall Conform With The Reference Codes And Standards. Use Of Materials Shall Be Further Be Governed By Other Requirements, Impose On Other Sections Of These Specifications. Materials Shall Be Subject To Test Necessary Their Fitness If So Requires; B. Alternate Materials - Use Of Any Material, Not Specified In These Specifications May Be Allowed Provided Such Alternate Has Been Approved By The Agency In Accordance With Generally Accepted Standards; C. Identification Of Materials - Each Length Of Pipe, Fitting, Box, Fixture, And Device Used In The Electrical System Shall Have Cast, Stamped Or Indelibly Marked On It The Manufacturer's Trademark Or Name, The Weight, Type And Classes Or Product When So Required By The Standards Mentioned Above; D. Wires And Cables I. All Wires Shall Be Copper, Soft-drawn And Annealed, Shall Be Of 99% Conductivity, Shall Be Smooth And True And Of The Cylindrical Form And Shall Be Within +/-1% Variation Of The Actual Size Called For. Ii. Wires And Cables Shall Be Plastic Insulated For 600 Volts Working Pressure, Type Thermoplastic High Heat-resistant Nylon-coated (thhn) Unless Otherwise Noted. Iii. All Wires And Cables Shall Be Color Coded, Color-coding Of Wires Are As Follows: (a) Line 1 – Red (b) Line 2 – Yellow (c) Line 3 – Blue (d) Ground - Green Iv. Minimum Size Of Branch Circuit Wire Shall Be 3.5 Mm2 Thhn For Power And Lighting System With 3.5mm2 Thhn Minimum Ground Wire. V. Wires 3.5 Mm2 And Bigger Shall Be Stranded. E. Switches I. Switches Shall Be Flush Mounted And Rated At 15 Amperes (amps), 250 Volts, One Way, Three-way As Required. Ii. Switches Shall Be Quiet Type, Spring Loaded, And The Cover Plates Shall Be Subject To The Approval Of Gsd Architect And Engineer. F. Receptacles I. Receptacles Shall Be Duplex, Flush Mounted And Rated At 10 Amps., 250 Volts, Parallel Or Tandem Slots With Grounding Slots As Required. All 110 Volts Receptacle Outlets Shall Be Rated 15 Amps, 120 Volts. 220 Volts Receptacle Outlets Shall Be Distinct From The 110 Volts Receptacle Outlets In Terms Of Configurations And Shall Be Provided With Markings. Ii. Cover Plates Shall Be Subject To The Approval Of The Architect And The Engineer. Stainless Steel Cover Plate Shall Be Required On All Wet Or Damped Area. Iii. All Receptacle Outlets With Ground-fault Circuit Interrupters (gfci) Shall Be Rated For 250 Volts Application With A Sensitivity Setting Of 300 Milliamps. D. Codes And Standards The Project Shall Conform To The Requirements For The Necessary Standards Relative To Each Aspect. The Following Standards Are As Follows, But Not Limited To, Viz: I. National Building Code Of The Philippines (nbcp) – Pd 1096; Ii. National Structural Code Of The Philippines (nscp); Iii. National Fire Protection Association (nfpa); Iv. Philippine Electrical Code (pec); V. New Electrical Engineering Law – Ra 7920; And Vi. National Plumbing Code Of The Philippines. Note: It Shall Be The Duty And Responsibility Of The Contractor To Provide Precautionary Measures To Ensure Safety To Any Persons Or Workmen And Adjacent Properties, Structures, And Other People For Damage And Injury Interested Suppliers Are Required To Submit Original/certified True Copy Of The Following: 1) Valid And Current Mayor’s Permit, (in Case Of Expired Mp/bp, Submit Copy Of Recently Expired Permit And Official Receipt As Proof Of Renewal), 2) Dti/sec Registration (for Partnerships/corporations, Attach General Information Sheet & Articles Of Incorporation), 3) Philgeps Registration Certificate, 4) Original Duly Signed Omnibus Sworn Statement (oss) And Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder, 5) Latest Income/business Tax Return, 6) Pcab License (license Category - C & D, Size Range - Small B), 7) Certificate Of Satisfactory Performance Issued By The Bureau Of Customs (for Contracts Entered Into With The Bureau) Or From Any Other Office/agency, If The Former Is Not Applicable And 8) Duly Signed Price Quotation Form (annex “a”). All Must Be Properly Signed And Sealed. Must Be Submitted In Hard Copy. Submission Of Quotation And Eligibility Documents In Hard Copy Is On Or Before November 04, 2024, 10:00 A.m., At General Services Division (gsd), Ground Floor, Ocom Building, Port Area, Manila. Award Of Contract Shall Be Made To The Lowest Quotation, Which Complies With The Minimum Description As Stated Above And Other Terms And Conditions Stated In The Price Quotation Form. Awarded Bidder Must Secure Performance Security/performance Bond 30% Of Contract Price Upon Receipt Of Notice Of Award. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Bidder Or His/her Duly Authorized Representative/s. The Boc Reserves The Right To Accept Or Reject Any Or All Quotations And To Impose Additional Terms And Conditions As It May Deem Proper.

Details: Description Specifications : Qty. Description 1 Lot A. General Conditions Complete All Works For The Project “renovation Of Xip Portal-designated Examination Area (dea) Covered Pathway” Including Supply Of All Materials, Equipment, And Systems, As Well As The Performance Of All Necessary Labor And Processes, In Accordance With The Plans, Specifications, The Bidding Documents, The Terms Of References And Other Related Contract Documents. The Contractor Is Not Limited To The Scope Of Works Listed. He Should Verify All Plans And Actual Conditions For The Necessity Of Work. If The Actual Situation Calls For Demolition, Removal, And Relocation He Shall Include Such And All Concomitant Works To Finish As Part Of The Scope Of Work. Any Discrepancies Found Between The Drawings And Specifications And The Site Conditions Or Any Errors Or Omissions In The Drawings Or Specifications Should Be Clarified With General Services Division (gsd) Architect /engineer. Should The Contractor Fail To Verify Or Clarify Discrepancies, Errors, Conflicts, Or Omissions In The Drawings And Specifications, It Shall Be Deemed That The Contractor Has Included In The Preparation Of His Bid The Necessary Works, Materials, Or Items Needed To Satisfy The General Scope Of Works. B. Scope 1. Mobilization A. Preparation Of Logistics Of Contractor’s Equipment; B. Setting Up Of Temporary Facilities Within The Site; C. Setting Up Of Necessary Water And Power Lines Required For The Project; D. Setting Up Of Temporary Fence Enclosure; E. Installation Of Project Details Tarpaulin Signage; And F. Inventory Of Items To Turn-over. 2. Site Works A. Site Demolition And Dismantling; B. Hauling Of Debris; C. Excavation For Septic Tank And Column; D. Backfilling And Compacting Of Excavated Soil; And E. Pouring And Compacting Of Gravel Bedding. 3. Structural Works A. Structural Concreting Of Slab On Fill Including Laying Of Reinforcing Bar And 4” Thick Compacted Gravel Bedding As Indicated In The Plans And Bill Of Quantities (boq); B. Structural Concreting Of Pedestal Column Including Supply, Fabrication, And Installation Of Pedestal Column’s Reinforcement Steel Bars As Indicated In The Plans And Boq; C. Supply, Fabrication And Installation Of Steel Column And Roof Beam As Indicated In The Plans And Boq; D. Supply, Fabrication And Installation Of Roof Framing As Indicated In The Plans And Boq; E. Supply, Fabrication, And Installation Of Roof; And F. Laying Of 2” Concrete Topping. 4. Carpentry Works A. Supply And Installation Of Ceiling Board With Complete Standard Metal Furring Support On All Ceilings As Indicated In The Plans And Boq; B. Supply And Installation Of 9mm Fiber Cement Board With Complete Standard Metal Stud Support On Drywalls As Indicated In The Plans And Boq; And C. Supply, Fabrication And Installation Of Vanity Counter Cabinet As Indicated In The Plans And Boq. 5. Tiling Works A. Supply And Installation Of Wall And Floor Tiles As Indicated In The Plans And Boq. 6. Door, Window, Mirror And Glass A. Supply And Installation Of All Door With Corresponding Door Jamb As Indicated In The Plans And Boq; B. Supply And Installation Of Glass Window As Indicated In The Plans And Boq; C. Supply And Installation Of Mirror As Indicated In The Plans And Boq; And D. Supply And Installation Of Tempered Glass Shower Partition As Indicated In The Plans And Boq. 7. Electrical Works A. Supply And Installation Of Complete Electrical System As Indicated In The Plans; B. Supply And Installation All Lighting Fixtures As Shown On The Reflected Ceiling Plan (rcp) Or As Specified By The Architect And/or End-user’s Representative; C. Supply And Installation Of Wiring Cables And Roughing-ins As Per Plans And Boq; D. Supply And Installation Of Wiring Devices, Switches, And Accessories As Indicated In The Plans And Boq; E. Complete Testing And Commissioning Of All Electrical Lighting System Using Valid Calibrated Test Equipment’s With General Services Division (gsd) Representative; F. Submission Of All Test Reports; And G. All Wiring Devices (lights And Switches) And Distribution Boards Shall Be Labelled Using Labelling Machine As Per Electrical Design Plan. 8. Plumbing Works A. Supply And Installation Of Plumbing Fixtures As Indicated In The Plans And Boq; B. Supply And Installation Of Plastic Septic Tank; C. Supply And Installation Of Piping For New Sanitary, Drainage And Waterline Layout; D. Supply And Installation Of Downspout Including Tapping Point To The Nearest Drainage Line; E. Fabrication And Installation Of Catch Basin Or Area Drain; F. Supply And Installation Of Waterline System Including Tapping To The Nearest Water Source; And G. Any Necessary Fittings And Accessories Not Indicated In The Plans Shall Be Provided To Complete The Installation. 9. Painting Works A. All Surface Defects Shall Be Repaired, And All Surfaces Shall Be Scraped To Remove Deteriorated Coatings And Other Deleterious Materials. Surfaces Shall Then Be Cleaned With Steam Or With A Commercial Cleaner To Remove All Grease, Oil, And Chemical Residues; B. Prior To Painting Works, Surfaces On Masonry, Wood, And Metal Must Be Free From Any Dirt, Grease, Old Paint, And Rust, Eliminate Loose Or Peeling Paint, And Get Rid Of Rust Deposits Before Applying Primer/putty And Paint Finish; C. Painting Of All Concrete And Steel Materials As Indicated In The Plans And Boq; And D. Contractor Shall Ensure That All Delivered Painting Materials To The Work Site Shall Be In Original Containers With Seals And Labels Intact. Containers Shall Not Be Opened Until After They Have Been Inspected By The End-user Or Its Duly Authorized Representative. 10. Restoration Work A. Supply And Installation Of Affected Pavers Block. B. Restoration Of Chip Road/floor Slab For The Installation Of Drainage Line System Including Catch Basin; And C. Restoration Of Any Necessary Materials/item That Need To Demolish/dismantle That Can Hinder The Approved Plan And Construction. 11. Demobilization A. Turn-over Of Items Covered By Inventory Submitted During Mobilization; B. General Site Cleaning; C. Submit Working Drawings (as-built Plan) Of The Following: - Architectural - Structural - Electrical & Auxiliary - Plumbing D. Hauling Of Debris And Materials From The Project Site To The Appropriate Disposal Area; And E. Removal And Hauling Of Tools And Equipment From The Project Site. 12. Permits, Licenses, And Taxes A. The Contractor Shall Secure And Pay All Permits, Fees, Licenses, Taxes, Etc. Necessary For The Execution Of The General Construction Works For The Project. B. The Contractor Shall Prepare The Complete Contract Documents Consisting Of Detailed Designs And Construction Drawings (architectural, Electrical, Structural, Mechanical, Plumbing/sanitary, Electronic And Communication Layout) In Accordance Needed By The Municipal Engineering Office For The Building Permit Purposes; And C. The Contractor Shall Prepare A Weekly Progress Report Which Shall Include An Overall Progress Chart Based On Actual Physical Accomplishment Of Construction Work And A Progress Chart Based On Actual Value Of Accomplished Construction Work, Among Others. 13. Payment Terms The Schedule Of Billing Specified In The Table Below Shall Be Followed By The Contractor: Order Of Billing Project Accomplishment Percentage First (1st) Billing At Least 50% Of The Work Has Been Accomplished Second (2nd) Billing At Least 80% Of The Work Has Been Accomplished Final Billing 100% Accomplished C. Specifications All Drawings, Whether Small Scale Or Detailed Drawings, Are Intended To Work In Unison With The Specifications And To Form Part Thereof, When Figures Are Given, They Are To Be Followed In Preference To Measurement By Scale. Anything Shown In The Drawings But Not Mentioned In The Specifications (or Vice-versa) Or Anything Not Expressively Set Forth In Either (but Which Is Reasonably Implied) Shall Be Furnished And Installed As Thought Specifically Shown In Mentioned Both. 1. Pre-construction Phase Guidelines A. A Joint Site Inventory Must Be Conducted And Signed By The Contractor, Gsd, And End-user; B. The Contractor Must Submit To Gsd His Program Evaluation Review Technique (pert) Chart To The Gsd Before The Start Of The Project; And C. The Contractor Must Submit To Gsd The List Of Manpower That Shall Be Utilized For The Project Along With Their Respective Designations/roles And Corresponding Qualifications. The Most Notable Figure For The Project Must Be The Project Manager, Preferably An Architect Or Engineer. 2. Implementation Phase Guidelines A. The Contractor Must Submit Weekly Progress Reports As Mentioned In Item B.13.c Of This Document Including Photo Documentations And Weather Update To Gsd; B. The Contractor Must Submit Weekly Their Daily List Of Manpower; C. The Project Manager, Who Must Be A Technical Professional, Must Be Present At The Project Site At All Times To Properly Monitor/oversee The Project As Technical Representative Of The Contractor’s Side; D. Boc, Thru Its Technical Inspection And Acceptance Committee (tiac) For Civil Works, Reserves Its Right To Conduct Monitoring Inspection, Aside From The Inspections For Billing Purposes. The Project Manager Must Always Be Present, Especially During Inspections For Billing Purposes, To Ensure Proper Communication Instead Of Relying On The Foreman Or Laborers Only; E. The Approved Floor Plan And Perspective Drawings Must Be Posted On A Wall Or Board So That They Are Readily Available And Visible Whenever Necessary; F. Materials To Be Used In The Construction/renovation Must Follow Those Specified In This Document (terms Of Reference), The Drawings, And/or The Boq. The Contractor Must First Secure Proper Approval Of Materials To Be Installed Via A Written Document Duly Approved By Both The End-user And Gsd. Any Change In Materials Must Also Have Proper Indorsement Thereafter. G. All Testings/activities (e.g., Waterproofing Test, Leak Test, Slump Test, Continuity Test, Insulation Resistance Test, Earthing Test, Pest Control Chemical Certificate, Etc.) Conducted By The Contractor Must Be Done With The Presence Of A Gsd Engineer/architect. Corresponding Reports Must Be Submitted To Gsd For Documentation And Validation Within Three (3) Calendar Days Upon Completion Of The Said Testing/activity; And H. Punchlisting Shall Be Conducted Upon 95.00% Completion As Ascertained By The Tiac. 3. Structural Steel A. All Structural Steel And Miscellaneous Metals Shall Conform To American Society For Testing And Materials (astm) Specification Designation For Carbon Steel With A Yield Strength Of 36,000 Pounds Per Square Inch (psi) (a36) Unless Otherwise Noted And Shall Be Fabricated And Erected In Accordance With The American Institute Of Steel Construction (aisc) Specification For The Design, Fabrication And Erection Of Structural Steel; B. All Welding Works Shall Comply With American Welding Society (aws) Specifications Standard And Performed By Certified Welders. All Welding Shall Be Performed By Electric Arc Process And Shall Be Done Using Approved Electrodes As Required By The Building Code. Welds Are Designed For Full Stress; C. Apply Two Coats Of Epoxy Primer For All Structural Shapes Prior To Erection, Repaint Areas Affected By Welding Works; And D. All Bolts, Screw Or Reinforced Bar That Will Be Drilled On Concrete Slab, Column, Wall, And Beams Shall Be Coated In Structural Epoxy Before Installation. I. Column Use 3” Galvanized Iron Steel Pipe Schedule 40 With 16mm Mild Steel (ms) Base Plate And 4 – 12mm Ø X 300mm Anchor Bolts. Ii. Roof Beam Use 2x4”x2.0mm Tubular Steel. Iii. Roof Framing Use 2x4”x2.0mm Tubular Steel For Rafters With 2x4”x2.0mm C-purlins Spaced At 600mm From Bottom Up To Apex Of The Roof Connected By 1”x5.0mm Angle Bar As A C-purlins Connector, 10mm Ø Round Bar For Sagrod In Between C-purlins Spaced At 1.2m On Center And Fascia Board With Angle Bar Frame. Iv. Roof Use Gauge #25 Longspan Prepainted Corrugated Type For Roof, Gauge#25 Prepainted For Gutter And Flashing And 10mm Single Foil For Insulation. 4. Concreting And Reinforcing Bars Works A. Concrete To Be Used Shall Have A Minimum Compressive Strength (fc’) Of 20.7 Mpa (3000 Psi) At 28 Days; B. Concrete Cover For Reinforcing Bars Shall Be As Follows: I. Foundation Elements Cast Against Earth – 75mm Ii. Foundation Elements Cast Against Form Or Lean Concrete – 40mm Iii. Beam And Columns – 40mm (measured To Stirrups And Lateral Ties); C. All Reinforcing Bars Shall Be Free Of Rust, Grease Or Other Materials That Will Impair Bonding; D. Reinforcing Bars Shall Have Minimum Yield Strength (fy) Of 276 Mpa; E. All Reinforcing Bars Shall Be Accurately And Securely Placed Before Pouring Concrete Or Applying Mortar Or Grout. F. Lap Splices Shall Be Staggered Such That Not More Than 50% Of Bars Are Spliced At The Same Point; I. Pedestal Column 250x250x1200mm (verify On Actual) Pedestal Column With 6-16mmø Vertical Reinforcement Steel Bars And 10mmø Lateral Ties Spaced At 3-50mm, 4-100mm, Rest 200mm On Center. Ii. Slab On Fill 125mm (verify On Actual) Slab On Fill With 10mmø Deformed Bar Spaced @ 300mm On Center Both Ways 5. Masonry A. Mixture Of Concrete Topping Shall Be One (1) Part Portland Cement And Two (2) Parts Sand Volume. 6. Carpentry Works All Wood Shall Be Treated With Colorless Anti Termite Wood Preservative. A. Ceiling Use 12mm Mr Gypsum Board For All Toilet And Pantry, 19x50x0.5mm Double Furring Spaced @ 400mm On Center, 12x38x0.8mm Carrying Channel Spaced @ 1.2m On Center, 25x25x0.5mm Wall Angle Along Perimeter Of The Area, Wood Ceiling Mouldings As Shown/indicated In The Plans And Boq. B. Cabinets Vanity Counter Use 20mm Marine Plywood Board With Edging For Cabinet Door And Carcass, 12mm Marine Plywood Board With Edging And Backing. Use Soft Closed Concealed Hinges, Soft Closed Drawer Guide, Porcelain Tiles, Synthetic Stone Slab Or Approved Equal For Countertop. (submit Material And Accessories For Approval). C. Drywall Partition Use 9mm Fiber Cement Board With 32x76x0.8mm Metal Studs Spaced @ 400mm On Center, 32x76x0.8mm Metal Tracks Spaced @ 1.2m From Slab Up To The Top Of Drywall Partition 7. Tiling Works The Tiles And Their Accessories Shall Be Free From Imperfection That Affects Their Quality, Appearance, And Strength. All Tiles Shall Be Set To Correct Grades And Level True To Lines, Laid Even. Submit Material For Approval. A. Floor I. Use 600x600mm Anti Slip Matte Porcelain Floor Tiles For Toilet. B. Wall I. Use 300x600mm Unglazed Ceramic Wall Tile For Toilet. 8. Doors, Windows, And Mirrors A. Door I. Door Shall Be Solid Panel Door Of Appropriate Size. Ii. Unless Otherwise Specified And Approved, Brass, Chromed Plated Loose Pin Hinges, Finely Finished. Iii. At Least Three (3) Pieces Of Hinges Per Leaf Of Doors For 2.10 Meters Height And 4 Pieces Of Hinger Per Lead Doors For 2.40 Meters Height. Use Ball Bearing Hinges Or Approved Equal. Iv. Door Shall Be Equipped With High Grade, Heavy Duty Or Standard Cylindrical Locksets, Door Closer And Stopper. (submit Material And Accessories For Approval). B. Window Awning Type Window Shall Be Powder Coated Aluminum Window With 6mm Tempered Clear Glass On Powder Coated Aluminum Framing. C. Mirror I. Mirror Shall Be 5mm Thick With 4x1" Powder-coated Aluminum Frame And 1/2” Fire Treated Marine Plywood (backing) D. Shower Glass Partition I. Glass Partition Shall Be 12mm Thick Tempered Glass Including Accessories And Fittings. 9. Painting Application Of Plastered Paint Finish On All Interior And Exterior Walls/partitions, Ceiling, And Concrete Surfaces Within The Scope Of The Interior And Exterior Renovation Works Unless Otherwise Indicated In The Plans And Specifications. A. All Paint And Accessories, Materials Incorporated In Or Forming A Part Thereof Shall Be Subject To The Approval And Selection Of Color, Tint, Finish, Or Shade By The Architect. B. Painting Of All Surfaces, Except Otherwise Specified Shall Be (3) Coats Work, One Primer And Two Finish Coats. C. All Paint Materials Shall Meet The Requirements Of Paint Materials Under Class A. D. All Surfaces To Be Painted Shall Be Examined Carefully Before Beginning Any Painting Work, And Other Trade Works Installed In Workmanship Condition To Receive Paint Or Ant Particular Finish. E. All Paint Materials Shall Meet The Requirements Of The Specifications Set By Gsd And Shall Be Delivered On The Job In The Original Container, With Labels Intact And Seal Unbroken. F. Concrete Surfaces. Latex Paint Shall Be Used, And Preparation And Application Must Be According To The Manufacturer’s Instructions. G. Drywalls; Latex Paint Shall Be Used, And Preparation And Application Must Be According To The Manufacturer’s Instructions. Use Spray Paint For Cubicle Partition. H. Wooden And Metal Surfaces; Automotive Lacquer Paint Shall Be Used, And Preparation And Application Must Be According To The Manufacturer’s Instructions. Use Spray Paint; And I. Color Pigments Shall Be Used To Produce The Exact Shades Of Paint, Which Shall Conform To The Approved Color Scheme. 10. Plumbing Works A. The Work Covered By This Section Consists Of Furnishing All Materials, Labor, Tools, And Equipment In Performing All Necessary Operations For The Installation Of The Complete Plumbing System Of Applicable Drawings. All Plumbing Works Shall Conform To The National Plumbing Code Of The Philippines; B. The Contractor Shall Be Responsible To Locate And Determine The Actual Location Of Existing Drainage Line To Conform With The Proposed Drainage System; C. Horizontal Drainage Piping Shall Run In Practical Alignment At A Uniform Grade Of Not Less Than Two Percent (2%); D. All Water Line Shall Be Polypropylene Random Copolymer (ppr) Pressure Nominal (pn) 20. Said Pipes Shall Be Pressure Tested Before Any Cutting Or Installation Is Done; E. All Drainage Pipe Shall Be Pvc Series 1000; F. Use 2030x1120x1070mm - 4mm Thk Pp/pe Composite Plastic Septic Tank, 50kg Weight, 1.5m3 Volume; And G. Use 4” Pvc Pipe For Downspout. 11. Electrical Works A. Quality Assurance - All Materials To Be Used Shall Be New And Shall Conform With The Reference Codes And Standards. Use Of Materials Shall Be Further Be Governed By Other Requirements, Impose On Other Sections Of These Specifications. Materials Shall Be Subject To Test Necessary Their Fitness If So Requires; B. Alternate Materials - Use Of Any Material, Not Specified In These Specifications May Be Allowed Provided Such Alternate Has Been Approved By The Agency In Accordance With Generally Accepted Standards; C. Identification Of Materials - Each Length Of Pipe, Fitting, Box, Fixture, And Device Used In The Electrical System Shall Have Cast, Stamped Or Indelibly Marked On It The Manufacturer's Trademark Or Name, The Weight, Type And Classes Or Product When So Required By The Standards Mentioned Above; D. Wires And Cables I. All Wires Shall Be Copper, Soft-drawn And Annealed, Shall Be Of 99% Conductivity, Shall Be Smooth And True And Of The Cylindrical Form And Shall Be Within +/-1% Variation Of The Actual Size Called For. Ii. Wires And Cables Shall Be Plastic Insulated For 600 Volts Working Pressure, Type Thermoplastic High Heat-resistant Nylon-coated (thhn) Unless Otherwise Noted. Iii. All Wires And Cables Shall Be Color Coded, Color-coding Of Wires Are As Follows: A. Line 1 – Red B. Line 2 – Yellow C. Line 3 – Blue D. Ground - Green Iv. Minimum Size Of Branch Circuit Wire Shall Be 3.5 Mm2 Thhn For Power And Lighting System With 3.5mm2 Thhn Minimum Ground Wire. V. Wires 3.5 Mm2 And Bigger Shall Be Stranded; E. Switches I. Switches Shall Be Flush Mounted And Rated At 15 Amperes (amps), 250 Volts, One Way, Three-way As Required. Ii. Switches Shall Be Quiet Type, Spring Loaded, And The Cover Plates Shall Be Subject To The Approval Of Gsd Architect And Engineer; And F. Receptacles I. Receptacles Shall Be Duplex, Flush Mounted And Rated At 10 Amps., 250 Volts, Parallel Or Tandem Slots With Grounding Slots As Required. All 110 Volts Receptacle Outlets Shall Be Rated 15 Amps, 120 Volts. 220 Volts Receptacle Outlets Shall Be Distinct From The 110 Volts Receptacle Outlets In Terms Of Configurations And Shall Be Provided With Markings. Ii. Cover Plates Shall Be Subject To The Approval Of The Architect And The Engineer. Stainless Steel Cover Plate Shall Be Required On All Wet Or Damped Area. Interested Suppliers Are Required To Submit Original/certified True Copy Of The Following: 1) Valid And Current Mayor’s Permit, (in Case Of Expired Mp/bp, Submit Copy Of Recently Expired Permit And Official Receipt As Proof Of Renewal), 2) Dti/sec Registration (for Partnerships/corporations, Attach General Information Sheet & Articles Of Incorporation), 3) Philgeps Registration Certificate, 4) Original Duly Signed Omnibus Sworn Statement (oss) And Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder, 5) Latest Income/business Tax Return, 6) Pcab License (license Category - C & D, Size Range - Small B), 7) Certificate Of Satisfactory Performance Issued By The Bureau Of Customs (for Contracts Entered Into With The Bureau) Or From Any Other Office/agency, If The Former Is Not Applicable And 8) Duly Signed Price Quotation Form (annex “a”). All Must Be Properly Signed And Sealed. Must Be Submitted In Hard Copy. Submission Of Quotation And Eligibility Documents In Hard Copy Is On Or Before November 04, 2024, 10:00 A.m., At General Services Division (gsd), Ground Floor, Ocom Building, Port Area, Manila. Award Of Contract Shall Be Made To The Lowest Quotation, Which Complies With The Minimum Description As Stated Above And Other Terms And Conditions Stated In The Price Quotation Form. Awarded Bidder Must Secure Performance Security/performance Bond 30% Of Contract Price Upon Receipt Of Notice Of Award. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Bidder Or His/her Duly Authorized Representative/s. The Boc Reserves The Right To Accept Or Reject Any Or All Quotations And To Impose Additional Terms And Conditions As It May Deem Proper.