Fencing Tenders

Details: The Department Of National Defence (dnd) Has A Requirement For A Digital Virtual Trainer (dvt) Enterprise License, Support, Training, And Additional Services. Dvt Is One Of The Core Ca And Joint Simulation Software Applications Used In Exercises, Training Events And Experiments.

Details: Title: Anti-aircraft Gun description: The Swedish Armed Forces Have Asked The Swedish Defence Materiel Administration To Procure 8 Anti-aircraft Guns, As Well As Framework Agreement For Ammunition And A Framework Agreement For Maintenance, Including Spare Parts For Anti-aircraft Gun.

Details: The Works To Be Procured Under The Proposed Dps Are Likely To Be Wide And Varied, And Cover All Aspects Of Minor Works To Include But Not Limited To:— Asbestos,— Brickwork,— Carpentry And Joinery,— Cleaning And Clearance,— Drainage,— Electrical,— Energy Efficiency,— Fencing And Gates,— Fire,— Foundations,— General Construction Multi Trade,— Glazing,— Groundworks,— Heating, Gas Appliances And Installations,— Highways,— Landscaping,— Lifts,— Masonry,— Modern Methods Of Construction,— Painting And Decorating,— Plasterwork And Other Finishes,— Plumbing,— Principal Contractor,— Roofing,— Scaffolding,— Specialist Treatment,— Wall, Floor, Tile And Sheet Finishes.the Dps Can Be Filtered By Service Templates, Geographical Region And Value Banding. Lcp Members May Therefore Invite All The Suppliers Within A Particular Service Category Requirement. This Option Shall Be Set Out Within Sproc.net At The Time Of Call-off.the Supplier Agreement Includes A Set Of Terms And Conditions That May Be Utilised By The Parties For Subsequent Call-offs Under The Dps (albeit Contracting Authorities Are Permitted To Incorporate Their Own Preferred Forms Subject To Their Ongoing Compliance With The Restricted Procedure Under Which This Dps Is Being Procured).the Dps In Itself Is Therefore Not A Contract; Contracts Are Only Formed When Services Are Called-off Under The Dps.the Tender Documents Issued By Contracting Authorities For Specific Call-offs Under This Dps Will Fully Confirm The Specific Terms And Conditions Applicable For The Execution Of The Works.suppliers Should Also Note That This Dps Places No Obligation On Its Approved Users To Procure Any Minor Works During The Term Of This Dps.lcp Is Working In Association With Adam Htt Ltd To Develop And Maintain This Dps.suppliers Should Read This Contract Notice Carefully And In Full Before Submitting Their Application To Join The Dps.

Details: North Somerset Council Require A Contractor To Deliver Refurbishment And New Development Works To Heritage Buildings At The Mainland End Of Birnbeck Pier In Weston Super Mare. It Is Intended For The Birnbeck 2a Landward Works To Commence In February 2025. The Successful Bidder Will Need To Work Within The Constraints Of The Site In Close Coordination With Other Contractors Working On The Wider Birnbeck Project. The Works In Scope Are As Follows: Landward Enabling Works: - Site Setup To Include Provision Of Welfare, Temporary Service Connections, Renewal Of Hoarding And Site Boundary Fencing Installation. - Site Wide Clearance And Salvage, Protect And Record Including Removal And Storage Of The Historic Gate Line. - Repair/reinstatement Of Sea Wall Including Steel Beam Replacement. External Repairs: - Pier View Repairs And Refurbishment. - South Toll House & Shell Shop Repair And Refurbishment. Refurbishment: - Pier Masters Cottage Repair And Refurbishment. - Demolition Of Pier Cottage Existing Northern Extension. New Development: - Pier Master's Cottage Café Extension. - Wc Block With Bin And Cycle Store. - New Service Connections And Landside External Lighting. - Landscaping Of Landward Site. Escorted Site Visits Are To Be Conducted On 29 October And 06 November 2024 Details Are Noted In The Invitation To Tender, Vol 1 - Instructions For Tendering Document. Documents Can Be Found And Downloaded From The Supplying The South West Portal - Https://procontract.due-north.com/advert?advertid=c431f214-2f82-ef11-8130-005056b64545&p=696a9836-1895-e511-8105-000c29c9ba21

Details: Pwgsc, On Behalf Of Defence Research And Development Canada (drdc), Is Issuing This Request For Proposal (rfp) For The Acquisition Of Expert Engineering Support For The Assessment Of High Speed And Hypersonic Aeropropulsion Technologies Located In Valcartier, Québec, Canada), As Detailed In Annex Statement Of Work.

Details: Joint Logistics Command (jlc) Is Conducting A Single-stage Open Market Request For Tender (rft) For The Provision Of Equipment Cleaning Services To The Australian Defence Force (adf). The Adf Has A Requirement To Comply With All Biosecurity Standards Mandated By The Department Of Agriculture Fisheries And Forestry (daff) For Equipment Returning To Australia From Overseas. To Achieve This Requirement, The Australian Defence Force (adf) Will Establish An Equipment Cleaning Contract Which Enables An Initial Clean (as Required) Performed Overseas And A Main Clean, Performed At Designated Quarantine Locations At Australian Points Of Entry. Industry Is Invited To Submit A Tender In Response To The Adf Ecc Request For Tender (adf Ecc Rft 38743) To Provide Initial Clean, Main Clean, Road Freight And Miscellaneous Services At Designated Locations Around Australia And Abroad. The Rft Includes, The Draft Contract (including Statement Of Work) And Conditions Of Tender (including Information Pack). Tenderers Are Invited To Participate In The Rft Industry Brief At Defence Plaza Melbourne Scheduled On 11 October 2024 Where Tenderers Will Be Provided Information On The Rft Requirements. Tenderers Must Nominate Attendees No Later Than 12:00pm Aedt On 09 October 2024 In Accordance With Attachment B To The Conditions Of Tender.

Details: The Department Of National Defence (dnd) Requires One (1) Level 3 Technology Architect (i.11) With A Focus On Modelling And Simulation (m&s) Technologies And One (1) Level 3 Operations Support Specialist (b.13) With A Focus On Distributed Synthetic Operations Centre (dsoc) Systems To Support The Exercise And Simulation (e&s) Branch Of The Royal Canadian Air Force (rcaf) Aerospace Warfare Centre (awc), Located On The Shirley’s Bay Campus In Ottawa, On. The Resources Will Support The Exploitation Of The E&s-designed And Operated Defence Secure Simulation And Training Node Infrastructure (dsstni) Information System (is) To Advance The Development, Operation And Sustainment Of The Rcaf Modelling & Simulation (m&s) Enterprise (rmse).

Description: Notice Of Proposed Procurement The Department Of National Defence Has A Requirement For The Items Detailed Below. The Delivery Is Requested At Cfb Esquimalt, British Columbia And Cfb Halifax, Nova Scotia . Item 1, Gsin: N4720, Nsn: 20-0017611, Hose Assembly, Nonmetallic Part No.: B-0000-04-ss-0360-o2, Ncage: 08471, Senior Flexonics Canada Ltd Quantity: 50, Unit Of Issue: Ay, To Be Delivered To Cfb Esquimalt, British Columbia. Item 2, Gsin: N4720, Nsn: 20-0017611, Hose Assembly, Nonmetallic Part No.: B-0000-04-ss-0360-o2, Ncage: 08471, Senior Flexonics Canada Ltd Quantity: 25, Unit Of Issue: Ay, To Be Delivered To Cfb Halifax, Nova Scotia. Bidders Proposing An Equivalent Or A Substitute Product Must Indicate The Brand Name And Model And/or Part Number And The Ncage They Are Offering. Bidders Must Submit Prices In Canadian Dollars. Bids Submitted In Foreign Currency Will Be Rejected. The Requirement Does Not Offer Exchange Rate Fluctuation Risk Mitigation. Requests For Exchange Rate Fluctuation Risk Mitigation Will Not Be Considered. All Bids Including Such Provision Will Render The Bid Non-responsive. The Requirement Is Subject To A Preference For Canadian Goods And/or Services. The Crown Retains The Rights To Negotiate With Suppliers On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada.

Description: Notice Of Proposed Procurement The Department Of National Defence (dnd) Has A Requirement To Procure Reflective Safety Belts. The Purpose Of This Requirement Is To Provide Canadian Armed Forces (caf) Personnel With Safe And Improved Visibility While Exercising Outdoors With No Or Low Light Conditions. The Immediate Need Is To Procure 4,000 Reflective Safety Belts To Be Delivered Within Forty (40) Days Of Contract Award. Additionally, An Option To Procure Up To An Additional 4,000 Reflective Safety Belts Per Year, For A Total Of 16,000 Reflective Safety Belts Throughout The Period Of The Contract With The Same Delivery Terms. Each Reflective Safety Belt Must Have The Following Specifications, At A Minimum: (i) Be Elastic And Have A Heavy Duty Clip; (ii) Be Between 1.5 And 2 Inches Wide And A Minimum Of 47 Inches Long; (iii) Be Of Yellow Or Green Color, And Have One Or Two Reflective Strips Running The Length Of The Belt; (iv) Be Adjustable To Fit Waist Sizes From 26 Inches To At Least 47 Inches With Loop Fastener; (v) Have A Minimum Visibility Range Of 1,000 Feet, And Provide 360 Degrees Of Visibility; And (vi) Have A White Version Of The Strengthening The Forces (stf) Identifier Printed On A Black Belt Buckle. The Crown Retains The Rights To Negotiate With Suppliers On Any Procurement. Documents May Be Submitted In Either Official Language Of Canada.

Details: Supply, Installation, Testing and commissioning of 08 passengers and 15 passengers lifts for serving/Ex- Defence and Para Military Personnel of Haryana (Construction of 72 Nos. flats Type-A and 72 Nos. flats Type-B) block 3 to 5 sec-6 Jhajjar.