Tenders of Federal Aviation Administration Usa

Market Survey: (bil) The Federal Aviation Administration (faa) Has An Upcoming Requirement For Replacement Of Flow Control Valves At The Faa Potomac Consolidated Tracon In Warrenton, Va 20187.

Notice Of Intent To Single Source – Parts Manufactured By Ssr Engineering

Elevator Maintenance Newark Atct, Nj

The Federal Aviation Administration (faa) Intends To Negotiate A Contract On A Single Source Basis To Ctt Inc. (ctt), A Kratos Company, San Jose, Ca, For The Acquisition Of Down Converter Modules For The Airport Surface Detection Equipment (asde)-3 Radar System. The Asde-3 System Provides Critical Surface Surveillance Capability To Major Airports Across The Nas. It Uses Enhanced Processing Software And Safety Logic To Alert Controllers And Prevent Runway Incursions At Large Congested Airports. the P/n: Sa-1990-90, Nsn 5840-01-3201732 Is Wholly Manufactured By The Original Equipment Manufacturer (oem) Ctt Inc. Ctt Has The Rights To All Proprietary Information Necessary To Conduct Manufacture, Repair, And Test Of These Assets Are Owned By Ctt And Have Not Been Authorized For Release To Any Third-party Vendors. As Such, Ctt Is The Only Qualified And Authorized Manufacturing Source Capable Of Meeting The Faa Requirement For Serviceable Assets Used For Repair Of The Asde-3 Surveillance Systems. the Current Model Became Non-supported By The Oem For Repair 1st Quarter Of 2024. Current On Hand Stock Has Almost Been Depleted Over The Past Twelve (12) Months. The Faalc Has Two (2) Serviceable Units Available To Support The Nas With An Average Demand Of Three (3) Assets Per Year. A Competitive Environment Cannot Be Created In A Reasonable Amount Of Time To Satisfy This Specific Need. a Replacement Radar System (smr4) Is Currently In Development And Is Expected To Begin Deployment In 2026. This Will Replace The Asde-3 Radar Completely Including All Of Its Parts And Components. As A Result, The Faa Will Only Maintain Support Of This Asset For The Next Four (4) To Five (5) Years While The New System Is Being Fielded. Therefore, The Cost And Time Necessary To Design, Develop And Certify A New Down Converter Is Unsupportable. in Accordance With The Faa Acquisition Management System Paragraph 3.2.2.4, The Purpose Of This Announcement Is To Inform Industry Of The Basis Of The Faa's Decision To Contract With A Selected Source Via Single Source Procedures. Ctt Inc. Owns All Proprietary Data Rights Proprietary Information Necessary To Conduct Manufacture, Repair, And Test Of These Assets. a Market Survey (6973gh-25-ms-10960) Was Posted To The Sam.gov Web Site On December 5, 2024 And Closed On December 20, 2024. No Responsive Submittals Were Received In Response To The Market Survey. the Proposed Principle North American Industry Classification System (naics) Code For This Effort Is 334419, Other Electronic Component Manufacturing, With A Small Business Size Standard Of 750. this Announcement Is For Informational Purposes Only, Not A Solicitation/request For Proposal. A Competitive Solicitation Is Not Available For This Procurement. all Questions Pertaining To This Announcement Should Be Addressed In Writing To The Contracting Officer, Connie Houpt Via Email, Connie.m.houpt@faa.gov.

Ground Maintenance Services At The Faa Jacksonville Air Route Traffic Control Center (artcc) In Hilliard, Florida

6973gh-25-r-00060 Mobile Shelter Idiq

Market Survey/capability Assessment For – Arsr-4 Data Extraction Assembly Modification Kits

Replacement Of Door In Albuquerque, New Mexico

Procurement Of Msa Dyna Glide System Components For The Federal Aviation Administration (faa) the Federal Aviation Administration (faa) Requires Part Numbers 506388 (amount 100), 506389 (amount 20), 503698 (amount 40), 506400 (amount 15), 506391 (amount 300) And 503690 (amount 100). Manufacture Is Msa. the Purpose Of This Market Survey Is To Solicit Statements Of Interest And Capabilities From Interested Vendors In Accordance With Faa Acquisition Management System (ams) Policy 3.2.1.2.1. This Information Will Be Used By The Faa In Choosing The Method And Type Of Procurement Competition To Be Used To Fulfill This Requirement. The Faa Requires Copies Of Certification Letters For Interested Service-disabled Veteran-owned Small Businesses (sdvosb) Or Eligible Socially And Economically Disadvantaged Businesses That Are Certified By The Sba For Participation In The Sba’s 8(a) Program. responses To This Market Survey Will Be Used For Informational Purposes Only. north American Industry Classification System (naics) Code 33399 All Other Misc. Manufacturing. Size Standard 500 Employees. the Nature Of The Competition And Procurement Method That Will Be Conducted For This Requirement Has Not Yet Been Determined. The Faa Will Review The Responses To This Market Survey And Will Make Acquisition Planning Decisions Based On Market Survey Responses And The Faa’s Needs. The Faa May Decide To Conduct A Full-and-open Competition Or Set Aside All Or Part Of The Procurement For Small Businesses, Service-disabled Veteran-owned Small Businesses, Or Eligible Socially And Economically Disadvantaged Businesses That Are Certified By The Sba For Participation In The Sba’s 8(a) Program. in Order To Make This Determination The Faa Requires The Following Information From Interested Vendors In Accordance With The Attached Documents Herein: general Capability Statement - This Document Is Limited To Not More Than Six (6) Pages, In Times New Roman, Size 12 Pt. Font, And Must Identify: type Of Services Provided By Your Firm; size And Type Of Services Provided By Previous Contracts (elaborate And Provide Detailed Information And Past Performance); number Of Years In Business. specific Capability Statement – If Offering A “like Or Equal” Product To The Listed Tei Equipment, Vendors Must Provide A Narrative And Specifications Sufficient To Allow The Faa To Make A “like Or Equal” Determination. response Shall Also Provide A Point Of Contact Number And Name (either By Phone, Email Or Both) For Questions. *proof Of Entity Registration In The System For Award Management (https://sam.gov) a Copy Of The Vendor's Sba 8(a) Certification Letter, If Applicable Or Certification Of Sdvosb Eligibility, If Applicable. *per The Faa Acquisition Management System (ams), Clause 3.3.1-33 System For Award Management (sam), Paragraph (b)(1) “by Submission Of An Offer, The Offeror Acknowledges The Requirement That A Prospective Awardee Must Be Registered In The Sam Database Prior To Award, During Performance, And Through Final Payment Of Any Contract, Basic Agreement, Basic Ordering Agreement, Or Blanket Purchasing Agreement Resulting From This Solicitation.” this Is Not A Screening Information Request Or Request For Proposal Of Any Kind. The Faa Is Not Seeking Or Accepting Proposals At This Time. The Responses Will Be Used To Develop The Source List For This Requirement. The Faa Will Not Pay For Any Information Received Or Costs Incurred In Preparing The Response To The Market Survey. Therefore, Any Cost Associated With The Market Survey Submission Is Solely At The Interested Vendor’s Expense. all Responses To This Market Survey Must Be Received By Tuesday, February 10, 2025, 2:00 Ct. Please Include “market Survey Response: “msa Parts” In The Subject Line Of Your Email. Information Provided Will Not Be Released But Please Mark Proprietary On All Documents Submitted, As Necessary. no Phone Calls Please. All Questions Must Be In Writing Via Email To The Contract Specialist. Contact Information Is Provided Below. all Submittals Should Be Submitted In Electronic Format (email) To: haylee Hildebrand, Contract Specialist haylee.p.hildebrand@faa.gov

Basic Ordering Agreements (boa) For Design/build (d/b) And Bid/build (b/b) Services