Fabrication Tenders

Details: Description Item No. Description Quantity Unit A.1.1(3) Provision Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer (rental Basis) 1.00 Lot B.5 Project Billboard 1.00 Lot B.7(2) Occupational Safety And Health Program 1.00 Lot B.9 Mobilization/demobilization 1.00 Lot 804(1)b Embankment From Common Borrow By Equipment 1,800.00 Cu.m. 900(1) Structural Concrete For Footing Tie Beam, Column, Suspended Slab, Girder/beam (class A, 28 Days) 1.00 Lot 900(1)c2 Structural Concrete For Footing And Slab On Fill (class A,28 Days) 25.00 Cu.m. 902(1) Reinforcing Steel Of Reinforced Concrete Structures For Two Up To Five Storey 36.00 Cu.m. 903(2) Formworks And Falseworks 6,944.00 Kg 1001(6) Catch Basin (concrete/chb) 245.00 Sq.m. 1001(8) Sewer Line Works 5.00 Ea 1001(11) Septic Vault 1.00 Lumpsum 1003(1)e Hardiflex On Metal Frame Ceiling 1.00 Units 1003(2) Structural Concrete For Footing Tie Beam, Column, Suspended Slab, Girder/beam (class A, 28 Days) 242.00 Sq.m. 1007 Aluminum Glass Door 50.00 Sq.m. 1008 Aluminum Glass Window 21.00 Sq.m 1010(2)b Wooden Panel Door 42.00 Sq.m 1013(2) Fabricated Metal Roofing Accesory 14.50 Sq.m 1014 Prepainted Rib Type Metal Sheets 65.00 M 1018(1) Glazed Tiles And Trims 263.00 Sq.m. 1027(1) Cement Plaster Finish 305.00 Sq.m. 1032(1)a Painting Works (masonry Painting) 382.00 Sq.m. 1032(1)c Painting Works (metal Painting) 157.00 Sq.m. 1046 100 Mm Chb Non Load Bearing (including Rsb) 374.00 Sq.m. 1046(2) 150 Mm Chb Non Load Bearing (including Rsb) 184.00 Sq.m. 1047(2)a Structural Roof Framing 123.00 Sq.m. 1047(2)c Structural Steel Purlins 6,109.00 Kg 1047(3)a Strutctural Steel Accessories (anchor Bolts) 1,408.00 Kg 1047(3)b Metal Structure Accessories (sag Rod) 96.00 Pc 1047(3)c Structural Steel Accessories (turn Buckle) 23.00 Pc 1047(3)d Structural Steel Accessories (crossbracing) 22.00 Pc 1047(5) Structural Steel Accessories (steel Plates) 44.00 Pc 1100 Junction/utility/pull/square Box 1,065.00 Kg 1100(6)a 20mmø-32mmø Polyvinyl Chloride (pvc) Pipes 245.00 Pc 1100(6)b 90mmø Polyvinyl Chloride (pvc) Pipes 100.00 Pc 1101(2)a 1.6mm² - 5.5mm² Electric Wire (tw/thhn/twhn²) 105.00 Ln.m 1101(2)d 150mm² - 250mm² Electric Wire (tw/thhn/twhn²) 3,300.00 Ln.m 1101(4) Switches 200.00 Ln.m 1101(15) Convenience Outlet 19.00 Set 1102(1) Panelboard With Main & Branch Circuit Breakers 55.00 Set 1103(5) Lighting Fixtures 1.00 Lot 1200 Exhaust Fan/ceiling Fan 112.00 Set 1200(a) Airconditioning System 3.00 Set Spl1 Electrical Duct With Electric Post 4.00 Set Equipment Needed (minimum): Cutting Outfit 1 Unit Welding Machine 1 Unit Truck Mounted Crane (20-25 Mt) 1 Unit Bar Cutter 1 Unit One Bagger Concrete Mixer 1 Unit Bar Bender 1 Unit Backhoe( 0.80cu.m.) 1 Unit Plate Compactor 1 Unit Plate Compactor 1 Unit Concrete Vibrator 1 Unit Dump Truck (10 Cu.m.) 1 Unit

Details: Description Invitation To Bid For Rehabilitation Of Senior Citizen’s Building At Santiago, Naujan, Oriental Mindoro 1. The Provincial Government Of Oriental Mindoro (pgom), Through The 20% Df 2025 Intends To Apply The Sum Of Seven Hundred Ninety Nine Thousand Eight Hundred Pesos And 97/100 (php 499,438.30) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “rehabilitation Of Senior Citizen’s Building At Santiago, Naujan, Oriental Mindoro (ib No. Cw-2025-131)”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening.¬ 2. The Provincial Government Of Oriental Mindoro (pgom) Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 23 Calendar Days. Bidders Should Have A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Description Qty/unit B.5 801(1) 803(1)a 900 (7) 903(2) 1046 (2) A1 1004(2) 1010(2)a 1003(1)a1 1027 (1) 1032(1)a 1032(1)b 1032 (1) C 1013(2)a2,1013(2) B1 1014(1)b2 1047(1) 1001(9) 1100(10), 1101(33), 1103(1) Project Billboard/sign Board Removal Of Structures And Obstruction Structure Excavation (common Soil) Reinforced Concrete Formworks And Falseworks 100mm Chb Non-load Bearing (including Reinforcing Steel) Finishing Hardwares Flush Doors Ceiling, 4.5mm Thk. Fiber Cement Board On Metal Frame Cement Plaster Finish Painting Works (masonry/concrete) Painting Works, Wood Painting Works, Steel Fabricated Metal Roofing Accessory Prepainted Metal Sheets, Long Span, Above 0.427mm, Rib Type Structural Steel, Storm Drainage And Downspout Conduits, Boxes & Fittings (conduit Works/conduit Rough In), Wires & Wiring Devices, Lighting Fixtures And Lamps 1.00 Ea 1.00 I.s. 1.44 M3 2.39 M3 38.72 M2 27.82 M2 1.00 L.s 1.68 M2 54.49 M2 31.72 M2 54.49 M2 3.36 M2 124.20 M2 45.50 M 63.00 M2 1.00 I.s. 1.00 L.s. 1.00 I.s. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Bids And Awards Committee Of The Pgom And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. Of Mondays To Fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 24, 2025 To March 03, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php 500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before March 03, 2025 At 8:30 A.m. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 8. Bid Opening Shall Be On March 03, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Activity. 9. The Pgom Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Engr. Jollie Ver E. Lasic Head, Bac Secretariat Pgo – Procurement Division Provincial Capitol Complex Camilmil, Calapan City, Oriental Mindoro (february 24, 2025) Atty. Earl Ligorio R. Turano Ii Bac Chairperson

Details: The U.s. Army Corps Of Engineers (usace), Portland District (nwp) Intends To Negotiate And Award An Out-of-scope Modification On Contract W9127n24p0050 With Biomark To Perform Nonroutine Maintenance And Repair Of An Existing Passive Integrated Transponder (pit) Interrogation System On Lebanon Dam, Oregon. The Contract Meets The Requirements Under The Biological Opinion (biop) On The Continued Operation And Maintenance Of The Willamette River Basin Project Under The Endangered Species Act (esa), And Court Injunction Case 3:18-cv-00437-hz By The U.s. Army Corps Of Engineers (usace), Portland District (nwp). the Period Of Performance For The Modification Clin Begins 15 February 2025 To 15 April 2025. pit Interrogation System Capabilities Include Pit Antennas That Are Installed On Structures And Span Large Main Stem River Channels The Pit Interrogation System And Related Equipment Was Custom-built By Biomark To Meet The Unique Challenges Of This Study Area And Is Not Commercially Available. biomark Will Conduct Nonroutine System Analyzation And Troubleshooting To Isolate And Provide Solutions For System Interference (“noise”) That Is Theorized To Be A Result Of Mechanical Activity Near The Installed System. Additionally, Biomark May Perform Nonroutine Maintenance And Repair Of The Pit Interrogation System Installed At Lebanon Dam To Include Supplying And Installing Proprietary Parts. data Consistency And Continuity Are Critical For Fish Passage And Survival Research On Long-term Population Trends In The Basin. Additionally, The Court Injunction Case Under The Endangered Species Act (esa), And Court Injunction Case 3:18-cv-00437-hz Requires The Continued Operation Of The Pit Interrogation System. Any Gaps Or Shift In Data Collection Protocols Would Preclude The Comparison Of Data From Year To Year. This Would Result In Many Small Datasets Rather Than One Continuous Dataset And Usace Would Be Out Of Compliance With The Court Injunction. The Government Has Determined This Contract To Be Of Critical Importance To The Continued Monitoring And Studies As Required By The Court Injunction. all Service And Supplies Must Be Compatible In All Aspects (form, Fit, And Function) With Existing Pit Interrogation System Presently Installed At Lebanon Dam. The Current System Is Designed, Fabricated, Installed, And Monitored By Biomark. Maintenance Or Repair Must Use Biomark’s Products And Expertise As They Are A Full-service Vendor Who’s Detection Antennas Are Unique And Their Designs Proprietary. Given The System Elements Are Proprietary, Maintenance Services Of The Above Instruments Performed By Third Parties Will Void All Warranties, Only The Original Manufacturer Can Meet This Requirement. no Other Contractor Can Provide The Services Biomark Currently Provides To Ensure Data Consistency And Continuity Of Services And Meeting The Court Injunction Requirements. currently, A Solicitation Does Not Exist. this Notice Is Not A Request For Competitive Proposals Or Quotations. interested Concerns Must Show Clear And Convincing Evidence That Competition Of This Requirement Would Be Advantageous To The Government By Submitting A Capability Statement Demonstrating Ability To Conduct The Work. If No Affirmative Written Responses Are Received By 10:00 A.m. Pacific Time On 05 February 2025 An Award Will Be Made Without Further Notice. Oral Communications Are Not Acceptable In Response To This Notice. A Determination By The Government Not To Compete This Proposed Requirement Is Solely Within The Discretion Of The Government. Electronic Responses And Questions Shall Be Submitted Via Email To The Contracting Point Of Contact Listed Below. The U.s. Army Corps Of Engineers Is Not Responsible For Any Costs Incurred By Responding To This Notice. *no Phone Inquiries, Please. capability Statement Submission Requirements 1. Point Of Contact Name, Email Address And Phone Number, Cage Code And Unique Entity Id (uei) Number (if Available). 2. If The Organization Is A Small Business, Please State The Category Of Small Business, Such As 8(a), Hubzone (historically Underutilized Business Zone), Sdvosb/vosb (service-disabled Veteran-owned Small Business/veteran-owned Small Business, Wosb (women-owned Small Business). 3. Statement Of Capabilities Detailing The Interested Party’s years Of Experience And Brief Description Reviewing And Downloading Pit Tag Data From Biomark Is1001 Pit Interrogation Systems And Uploading The Data To The Ptagis Website (https://www.ptagis.org). years Of Experience And Brief Description Operating, Maintaining, Tuning, And Optimizing Biomark Is1001 Pit Interrogation Systems. site Safety And Health Officer That Meets The Requirements Of The Em 385-1-1. send Responses By Email, Labeled As “w9127n24p0050 P00003 – Lebanon Dam Pit Interrogation System Maintenance” In The Subject Line To The Following: antwain.r.burks@usace.army.mil And Justin.f.figueredo@usace.army.mil

Details: Description Invitation To Apply For Eligibility And To Bid No. Par G-2024-06 The Municipal Government Of Paranas, Samar Through Its Bid And Award Committee (bac), Invites Registered Suppliers To Apply For Eligibility And If Found Eligible To Bid For The Supply And Delivery Of The Items Listed Below: Procurement Of Supply, Delivery, And Installation Of Water Refilling Station Approved Budget For Contract (abc): Php 336,892.00 Delivery Schedule: 60 Calendar Days Item Quantity Unit Cost Total Cost 300 Ml Pet Bottle 600 Pcs Cap Seal 1 Pack Sticker Label 1 Pack 5-gallon Water Container 150 Pcs Heat Gun, 220v 1 Unit G-1 Pipes 2x2x20" 5 Pcs G-1 Coupling 2x2x2" 5 Pcs G-1 Pipes 1x1x20" 5 Pcs Ejector Pump 1 Unit 10x54" Multi-media Carbon Filter (back Washable) 1 Unit High Capacity, Heavy Duty 10" Housing With Micro Lab Grade Sediment Filter 1 Unit 10x52" Multi-media Filter (back Washable) 1 Unit 10x54" Water Softener (auto Backwash) 1 Unit Brine Tank 1 Set Choice Of Vontron Membrane 2 Units Stainless Steel Membrane Vessel 4x40 2 Units Ihp Heavy Duty Carbonator Motor Continues Duty 1 Unit 0-5 Flow Meter 2 Units Liquid Filled Pressure Gauges 1 Unit Stainless Steel Ro Mounting Frame W/ Control Panel 1 Unit Automatic Pressure Switch Control 2 Unit Stainless Steel Pressure Control 1 Unit Stainless Needle Valve 1 Unit High Capacity, Heave Duty 20" Housing Duty 20" With (10 And 15 Micron) Lab Grade Sediment Filter 6 Unit 20" Slim Housing W/1 Cto Carbon Block Filter 1 Unit 20" Slim Housing 2/5 And 1 Micro Sediment 2 Pcs 20" Slim Housing W/ Polishing Filter 1 Unit 6 Gpm Ultraviolet Sterilizer (1 Set) 1 Set Stainless Bal Valves/filling Spouts 2 Pcs S/s Motor Pump (1hp) 1 Unit Stainless Steel 750 Liters Tank (raw Water) 1 Unit Stainless Steel 750 Liters Tank (purified Water) 1 Unit Fabricated Motorcycle Body (sidecar) 1 Unit Insurance 47 Head Total Inclusion: Water Source Geoscan Delivered On Site We Will Only Accept An Offered Price That Is Fixed And Is Not Subject To Any Adjustment. Bid Shall Be Valid For A Period Of Sixty (60) Days From The Date Of Submission. Bidding Documents May Be Obtained From The Municipal Treasurer In The Municipal Hall After Payment Of A Non-refundable Fee In The Amount Of Five Hundred Pesos Only (php 500.00). The Bid Shall Include The Following Documents: • Form Of Bid (using Prescribed Form) • Bid Securing Declaration, Or Any Form Of Bid Security, Amount And Validity Period; Only The Followings Are Acceptable: (i) Cash, Certified Check, Cashier’s Check, Bank Draft Or Irrevocable Letter Of Credit – (2.0% Of Bid Price) (ii) Bank Guarantee – (2.0% Of Bid Price) (iii) Surety Bond – (5.0% Of Bid Price) • Dti Business Name Registration Or Sec Registration Certificate • Philgeps Registration • Mayors Permit • Tax Clearance • Statement Of All Ongoing Government And Private Contracts • Statement Of Slcc • Nfcc Computation Or Committed Line Of Credit • Technical Specifications Of The Goods Being Offered (brochures/manual To Be Attached) • Omnibus Sworn Statement In Accordance With Section 25.3 Of This Irr • Audited Financial Statements, Showing, Among Others, The Consultant’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission. • Warranty Certificate The Schedule Of Bac Activities Are As Follows: Bac Activities Schedule/ Time Location A. Posting/ Advertisement Of Itb February 15, 2025 B. Issuance Of Bidding Documents February 15, 2025 C. Submission/ Dropping Of Bids/ Opening Of Bids February 24, 2025, 10:00 Am, New Conference Room, Municipal Hall, Municipal Government Center Interested Bidders May Submit Letter Of Intent Address To The Chairman, Bids And Awards Committee, Municipal Government Of Paranas, Samar. The Municipal Government Of Paranas, Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. (sgd.) Engr. Alex O. Calinao Bac Chairman

Details: Description Invitation To Bid For The Improvement Of Daycare Center (upper Banig) 1. The Municipal Government Of La Trinidad, Through The General Fund 2024 Intends To Apply The Sum Of Four Hundred Ninety-nine Thousand Nine Hundred Ninety-one And 55/100 Pesos (php499,991.55) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Improvement Of Daycare Center (upper Banig) (pow-8751-2025-twg-02). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipal Government Of La Trinidad, Benguet Now Invites Bids For The Project: Project Reference No.: Pow-8751-2025-twg-02 Name Of Project: Improvement Of Daycare Center (upper Banig) Project Location: Tawang, La Trinidad, Benguet Contract Duration: 33 Calendar Days Source Of Fund: General Fund 2024 Brief Description: Item Scope Of Work To Be Done B.5 Project Billboard/signboard B.7 (2) Occupational Safety And Health Program B.9 Mobilization / Demobilization Spl.1 Excavation Works Spl.2 Materials’ Manual Hauling Spl.3 Steel Matting Fence (fabricated) Spl.4 Embankment 404 Reinforcing Steel Bar, Grade 40 405 Structural Concrete Class A 505(5) Grouted Riprap Class A 1006 Steel Door Equipment Requirement: 1 Unit Bar Cutter 1 Unit Bar Bender 1 Unit Cargo Truck (10t, 270hp) 1 Unit One Bagger Mixer 1 Unit Welding Machine 1 Unit Water Truck (1000 Gal) Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee Of The Municipal Government Of La Trinidad, Benguet And Inspect The Bidding Documents At The Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet From 8:00am To 5:00pm, Mondays To Fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 25 – March 5, 2025 At Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Five Hundred Pesos (php500.00). It May Also Be Downloaded Free Of Charge From The Philippine Government Electronic Procurement System (philgeps) Website, Provided That Bidders Pay The Applicable Fee For The Bidding Documents No Later Than The Submission Of Their Bids. 6. The Municipal Government Of La Trinidad, Benguet Will Hold A Pre-bid Conference On (n/a) Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet On Or Before March 5, 2025 At 9:00am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On March 5, 2025 At 10:00am At The 2nd Floor Municipal Disaster Risk Reduction Office, Km. 5 Pico, La Trinidad, Benguet. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipal Government Of La Trinidad, Benguet Reserves The Right To Reject Any And All Bids, Annul The Bidding Process, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Corazon A. Uyaan Head Bac Secretariat Bids And Awards Committee Office Municipal General Services Office-extension 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet Contact Nos.: 0969 – 334 – 9233 Or (074) 619-2103 E-mail Address: Bac01latrinidad@yahoo.com Approved: (sgd) Yoshio P. Labi Bac Chairperson Noted: (sgd) Romeo K. Salda Head Of The Procuring Entity

Description: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| time Of Delivery (june 1997)|20||||||||||||||||||||| stop-work Order (aug 1989)|1|| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo)||tbd|n00383|tbd|tbd|tbd|tbd||||||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| value Engineering (jun 2020)|3|||| equal Opportunity (sep 2016)|2||| integrity Of Unit Prices (nov 2021)|1|| equal Opportuity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (jan 2023)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| limitation Of Liability--high-value Items (feb 1997)|1|| limitations On Pass-through Charges (jun 2020)|1|| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American--balance Of Payments Program (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|12|336413|1250||||||||||| facsimile Proposals (oct 1997)|1|| notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2||x| proposal Date Is Updated To 7 March 2025. \ the Purpose Of This Amendment Is To Incorporate The Following Change: 1. The Quantity Is Increased By Qty 5 To Qty 7. \ this Solicitation Will Be Using Competitive Procedures. This Requirement Will Be Limited To Government Government Approved Sources. Submission Of An Offer Indicates Acceptance Of, And Compliance With, The Requirement To Be An Approved Source For This Item. the Basis Of Award Will Be Trade-off. Offers Will Be Evaluated Based On The Non-price Factors Of Capacity, Delivery, And Past Performance, And When Combined, Those Non-price Factors Being More Important Than Price. Proposal Submission Should Include Non-price factors And Price Information. Price Will Still Be A Factor In Determining The Awardee. relevant Past Performance Demonstrates The Offeror's Past Performance Manufacturing (or Repair) An Item Of The Same Or Similar Scope, Complexity And Magnitude Relative To The Instant Requirement. The Submission Of Past Performance Should Be Limited To Three relevant Contracts. the Closing Date For This Solicitation Is Listed On Page 1. the Proposal May Be E-mailed To The Below Address And Must Be Received On Or Before 2:00 Pm Est Of The Closing Date. offers Received After The Closing Date Are Considered To Be Late And Will Not Be Considered For Award. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders, And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, or Sent By Other Electronic Commerce Methods, Such As E-mail. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To Issue Contractual Documents As Detailed Herein. \ 1. Scope 1.1 . Markings Shall Be In Accordance With Mil-std-130. 1.2 Pre-award / Post Award Requirements: due To The Critical Use Of This Item And Its Quality History, A Pre-award Survey And Post-award Conference May Be Required For All New Manufacturers. For All Previous Sources, A Post-award Conference May Be Recommended. 1.3 . The Contractor Shall Include On The Detailed Process/operation Sheets Developed, (1) All In House Manufacturing Processes And (2) The Identity Of All Manufacturing Sources Performing Processes/operations Outside Their Facility. These Sheets Shall Not Be revised Or Altered After The Successful Completion Of First Article Or Production Lot Testing Without Approval From The Basic Design Engineering Activity, Via The Pco. 1.4 . Unless Otherwise Specified, For Fabricated Parts, The Inspection method Sheets/ Final Inspection Sheets Shall List The Characteristics of Each Item Produced Under The Contract. the Manufacturer Shall Be Required To Provide Certifications Of All Raw material Including Castings And Forgings. The Material Source Shall Be identified And The Documentation Shall Be Able To Identify The Customer and/or Contract Number. The Manufacturer Shall Maintain All Raw Material documentation For A Minimum Of Ten (10) Years. the Contractor Is Responsible For Providing Completed Inspection Method Sheets/final Inspection Sheets Showing The Actual Dimensions Taken For all Characteristics,in Addition, Critical Characteristics Shall Be annotated. 1.5 The Components Being Acquired Under This Solicitation Have Been Classified As Flight Critical Requiring Engineering Source Approval By The Naval Air Systems Command. Only Those Companies Who Have Submitted Requests For Source Approval And Been Approved will Be Eligible For Award Under This Solicitation. Any Company Not Previously Approved May Submit A Source Approval Request To The Contracting Officer, Naval Inventory Control Point, (see Block 10 Of The sf33 For Name And Code). The Source Approval Request Shall Contain The Following Documentation And Shall Be Submitted By The Closing Date Of This Solicitation: (a) Copy Of Complete Configuration Drawings For A Similar Item(s) Which Your Company Has Produced Within The Past Three Years, Including Test Procedures For Which Your Company (1) Has Been Qualified To Manufacture And (2) Which Is Similar, I.e., Requires The same Materials, Manufacturing Processes, Inspections, Tolerances And Similar Application As The Item(s) For Which You Are Seeking Approval. (b) Copy Of The Complete Process/operation Sheets Used To Manufacuture The Similar Item, Including But Not Limited To, Detailed Shop Sketches. These Plans Must Note Those Operations And Processes Performed By Subcontractors/ Vendors. (c) Complete Copies Of Purchase Orders, Shipping Documents, Etc. That Document Delivery Of Production Quantities Of The Part To The Original Equipment Manufacturer Or Military Service. Provide The Most Recent Copies Of The Documents. (d) A Detailed Comparative Analysis Of The Differences/similarities Between The Similar Part And The Part(s) For Which You Are Seeking Approval. This Analysis Should Include Materials, Configuration, Tolerances, Process Requirements, Dimensions, Castings, forgings, Etc. (e) Copy Of Inspection Method Sheets Used In The Manufacturing And At Final Inspection. These Sheets Should Include Actual Tolerance, Print Requirements, Inspection Devices, Sources Performing The Operation And Level Of Inspection. Critical Characteristics should Be Discernible From All Other Characteristics. the Above Requirements Are A Subset Of Requirements Specified In The Aso source Approval Information Brochure Dated January 1995. The Submission Of This Data Subset Is Contingent Upon And In Consideration Of The Submitting Contractor Meeting All Other Requirements Specified In This Solicitation To Include A Bilateral Agreement With mda Which Includes Availability Of Complete Data, Mrb Disposition, Etc. Any Company Not Having Such Agreement, But Desiring To Seek Engineering Source Approval, Will Be Required To Submit Data Meeting All Requirements Of The Aso/navicp Source Approval brochure. the Contractor Shall Notify Navicp Code 072 When Material Required By This Contract Has Been Shipped To Destination.this Shall Be Accomplished By Sending a Copy Of The Dd Form 250, Material Inspection And Receiving Report To: naval Inventory Control Point attn: Code 072 700 Robbins Avenue, Phila., Pa 19111 or By Submitting A Facsimile To Fax: (215)697-2524, Attn: Code 072. 1.6 Sampling Rates (aqls) Indicated Below Shall Be Used In Accordance With ansi Z1.4 For Single Sampling And A General Inspection Level Of Ii. 1.7 In Addition To The 100% Pco Mandatory, Critical And Major Characteristics, attributes For Plating, Hardness And Non-destructive Testing Will Be Inspected one Hundred Percent. 1.8 Contractor Shall Develop A System For Identification Of Individual piece Parts For Traceability Purposes. Markings Shall Not Be Permanent. 1.9 An Aql Of 1.5 Will Be Used For Class 3 Threads And Dimensions, And geometric Feature Controls With A Tolerance Range Of .010 Or Less. 1.10 For Minor Characteristics, A Sampling Rate Determined By The Contractor and Subject To Qar Approval Will Be Used. 1.11 The Material Covered In This Contract/purchase Order Will Be Used In A crucial Shipboard System Enabling The Launch And/or Recovery Of Aircraft. The Use Of Incorrect Or Defective Material Would Create A High Probability Of Failure Resulting In A Serious Personnel Injury, Loss Of Life, Loss Of Vital shipboard Systems Or Loss Of Aircraft. Therefore,the Material Has Been designated As Critical Material And Special Control Procedures Are Invoked to Ensure Receipt Of Correct Material. 1.12 Articles To Be Furnished Hereunder Shall Be Manufactured, Tested And Inspected In Accordance With ;nawc Lakehurst; Drawing Number ( ;34000d1532801; ) ;rev "c" ; , Revision ;applies; And All Details And Specifications Referenced Therein. 1.13 Unless Expressly Provided For Elsewhere In This Clause, Equipment Such As Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Test Equipment, Or Any Other Manufacturing Aid Required For The Manufacture And/or Testing Of The Subject Item(s) Will Not be Provided By The Government Or Any Other Source And Is The Sole Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing Or Referenced specification. 1.14 If Mil-std-454 Is Referenced In The Drawings Or In The Specification, The Contractor Is Expected To Show Compliance With Ipc/eiaj-std-001c. 2. Applicable Documents drawing Data=mpr 1222 |80020| A| |d| | | | drawing Data=mpr 1223 |80020| C| |d| | | | 3. Requirements 1.unique Requirements: a.all Records Pertaining To Alre Csi/cai Manufacture And Inspection/test Shall Be Provided To The Alre Cognizant Technical Authority. All Records Shall Be Maintained By Lke Qa And By The Manufacturer For A Period Of Seven Years. 2. Interim Inspection Requirements: The Following Item(s) Requires An Interim Inspection At The Contractor's Location: a. P/n 34000d1532801, Aft Bogey Assembly (csi): i. Witness Of Torque Per Notes 2, 3, 4, And 5 Of Drawing 34000d1532801 (m101-m104). b. P/n 34000d1532802, Aft Bogey (csi): i. Verification Of Material Properties Per Note 3 Of Drawing 34000d1532802 (c101). ii. Witness Of Hardness Testing Per Note 3 Of Drawing 34000d1532802(c101). iii. Witness Of Ultrasonic Testing Per Note 3 Of Drawing 34000d1532802iv. Witness Of Penetrant Inspection Per Note 5 Of Drawing 34000d1532802 (m101). v. Witness Of Torque Per Note 8 Of Drawing 34000d1532802 (m102). vi. Witness Of Dimensional Inspection Per Drawing 34000d1532802 (c102-c106, M103-m105). c. P/n 34000d1532803; Wheel Assy, Horizontal, Aft (csi): i. Witness Of Torque Per Notes 4 And 5 Of Drawing 34000d1532803 (m101, M102). d. P/n 34000d1532804; Bracket, Horiz, Wheel, Aft (csi):i. Verification Of Material Properties Per Note 4 Of Drawing 34000d1532804 (c101). ii. Witness Of Hardness Testing Per Note 4 Of Drawing 34000d1532804 (c101). iii. Witness Of Ultrasonic Testing Per Note 4 Of Drawing 34000d1532804(c101)/ Iv. Witness Of Penetrant Inspection Per Note 9 Of Drawing 34000d1532804(m101). v. Witness Of Dimensional Inspection Per Drawing 34000d1532804 (c102). the Contractor Shall Assist On The Conduct Of The Interim Inspection(s) As Described Herein. The Contractor Shall Provide Adequate Facilities, Inspection Equipment, And Skilled Personnel, To Support The Nawcadlkenspector In The Conduct Of The Interim inspection(s). The Contractor Shall Provide Gauges, Tools, Fixtures, And Jigs Necessary To Perform The Inspections.the Contractor Shall Also Provide Sufficient Rigging/material Handling Services And Manpower To Setup/configure/operate Equipment& Machines Used to Accomplish The Inspection Task. This Contractorssist Requirement Shall Be Applicable To 100% Of The Production Quantitiesand As A Minimum, Include Inspection Of All (100%) Interim Inspectionrequirements Identified Above. 3. Alre Csi Parts Require Certification. When Certified, An Alre Part Is Marked With A Material Identification Code(mic). Nawcadlke Qa Will Provide The Mic To Dcma If The Component Is Source Accepted, And After Receipt Of All Aassociated Data. Application Of mic Shall Be In The Same Methodology As The Drawing Note For Part Marking, And In Same Area As Partmarking (next To, Above, Or Below). 4. Receipt Inspection And Certification Of Sub-components: a. P/ns 34000d1532802, 34000d1532803, And 34000d1532804 Shall Be Certified At The Time Of Interim Inspection. Parts Will Be Certified And Markedas Directed By Nawcadlke Prior To Assembly. Contractor Assist Andmarking As Specified Below Applies. 5. Receipt Inspection And Certification Of The Top Assembly: a. The Receipt Inspection And Certification Of The Top Assembly Shall Occur During The Final Inspection. Contractor Assist And Part Marking As Specified Below Applies. 6. Contractor Assist And Part Marking: a. The Contractor Shall Assist On The Conduct Of The Inspections (both Final And Interim) Required That Are Necessary To Certify The Critical Items 6. Contractor Assist And Part Marking: a. The Contractor Shall Assist On The Conduct Of The Inspections (both Finalnd Interim) Required That Are Necessary To Certify The Critical Items Specified Herein. The Contractor Shall Provide Adequate Facilities, Inspectionequipment, And Skilled Personnel, To support The Nawcadlke Inspectorin The Conduct Of The Interim Inspection(s). The Contractor Shall Provide Gauges, Tools, Fixtures, And Jigs Necessary To Perform The Inspections. The Contractor Shall Also Provide Sufficient Rigging/material Handlingservices And manpower To Setup/configure/operate Equipment & Machines Used To Accomplish The Inspection Task. This Contractor Assist Requirement Shall Be Applicable To 100% Of The Production Quantities. As Part Of The Mri Process, The Nawcadlke Qa Representative Will provide, In Writing, A Certification Number Along With Direction For Marking Thecritical Safety Items (csi). 4. Quality Assurance 4.1 Review Documentation As Provided Under Dd 1423 Requirements. 4.2 Critical Manufacturing Processes ( ;n/a; ) Heat Treat ( ;applies; ) Welding ( ;n/a; ) Cadmium Plating ( ;n/a; ) Engineering Chrome Plating ( ;n/a; ) Nickel Chrome Plating ( ;n/a; ) Casting(s) ( ;n/a; ) Forging(s) ( ;mpr 1222, Mpr 1223; ) Mpr (material Processing Requirements) 4.3 The Test To Be Performed Under The First Article Approval Clause (far 52.209-3) Of The Contract Are Listed Below 4.3.1 Dimensional Test (special) ;close Machine Tolerances, Hardness Test; 4.3.2 Requirements Of: ;lke Drawing Package; 4.3.3 Form ;applies; 4.3.4 Fit ;n/a; 4.3.5 Function ;n/a; 4.3.6 Compliance With Drawing ( ;80020; ) ;34000d1532801; , Revision ;c; And Specifications Referenced Therein. 4.4 In Addition To The Above Tests, The First Article(s) To Be Inspected Hereunder Shall Also Be Subjected To Those Tests Which Will Demonstrate That The Article(s) Comply With The Contract Requirements 4.5 The Contractor Shall Be Responsible For Providing The Necessary Parts And Repair Of The First Article Sample(s) During Inspection 4.6 The Contractor Shall Notify The Pco, Aco, And Qar Fourteen (14) Days Prior To Conducting The First Article Test So That The Government May Witness Such Testing. 4.6.1 The Qar Shall Be Present To Witness All First Article Testing. 4.6.2 The Following Additional Personnel Shall Witness The First Article Testing: ;lonnie White Nawc Qa Rep At Fax (732) 323-4986; 4.7 Disposition Of Fat Samples 4.7.1 ; ; Sample(s) May Be Destroyed During Testing. 4.7.2 ;applies; Unless Otherwise Provided For In The Contract, Sample(s) Shall Remain At The Contractor And May Be Considered As Production Items Under The Contract Provided The Sample(s) Can Be Refurbished To Ready For Issue Condition And Provided The sample(s) Have Inspection Approval Of The Cognizant Dcmc Qar. Sample(s) May Be Shipped As Production Items Only After All Other Units Required Under The Contract Have Been Produced And Are Ready For Shipment. 4.8 Test Sample Coating Instructions 4.8.1 Samples Are To Be Unpainted. Corrosive Areas Are To Be Coated With A Light Preservative If Required. 4.9 Notice To Government Of Testing At The Contractors Facility. 4.9.1 Far 52.209-3 Applies (a) The Contractor Shall Present ;one; ; Unit(s) Of The Following Cage( ;80020; ; ), Part Number ;34000d1532801; ; , Revision ;c; ; As Specified In This Contract. At Least Fourteen (14) Calendar Days Before The Beginning Of The First Article Testing, The contractor Shall Notify The Contracting Officer, In Writing, Of The Time And Location Of The Testing So That The Government May Witness The Tests. (b) The Contractor Shall Submit The First Article Test Report Within 15 Calendar Days From The Date Of Testing To: ;pco; ; the Contractor Shall Mark The Report "first Article Test Report" And Cite The Contract Number And Lot/item Number. Review Documentation As Provided Under The Dd1423 Requirements. (c) Within 45 Calendar Days After The Government Inspects The First Article, The Contracting Officer Shall Notify The Contractor, In Writing, Of The Approval, Conditional Approval, Or Disapproval Of The First Article. The Notice Of Approval, Conditional approval, Or Disapproval Shall Not Relieve The Contractor From Complying With All Requirements Of The Specifications And All Other Terms And Conditions Of This Contract. A Notice Of Conditional Approval Shall State Any Further Action Required Of The contractor. A Notice Of Disapproval Shall Cite Reasons For Disapproval. (d) If The First Article Is Disapproved, The Contractor, Upon Government Request Shall Repeat Any Or All First Article Tests. After Each Request For Additional Tests, The Contractor Shall Make Any Necessary Changes, Modifications, Or Repairs To The First article Or Select Another First Article For Testing. All Costs Related To These Tests Are To Be Borne By The Contractor, Including Any And All Costs For Additional Tests Following A Disapproval. The Contractor Shall Then Conduct The Tests And Deliver Another report To The Government Under The Terms And Conditions And Within The Time Specified In Paragraph B Above. The Government Reserves The Right To Require An Equitable Adjustment Of The Contract Price For Any Extension Of The Delivery Schedule Or For Any additional Costs To The Government Related To These Tests. (e) If The Contractor Fails To Present Any First Article On Time, Or The Contracting Officer Disapproves Any First Article, The Contractor Shall Be Deemed To Have Failed To Make Delivery Within The Meaning Of The Default Clause Of This Contract. (f) Unless Otherwise Provided In The Contract, And If The Approved First Article Is Not Consumed Or Destroyed In Testing, The Contractor May Deliver The Approved First Article As Part Of The Contract Quantity If It Meets All Contract Requirements For acceptance. (g) If The Government Does Not Act Within The Time Specified In Paragraph (c) Above The Contracting Officer, Shall, Upon Timely Written Request From The Contractor, Equitably Adjust Under The Changes Clause Of This Contract The Delivery Or Performance Dates and/or The Contract Price, And Any Other Contractual Term Affected By The Delay. (h) Before First Article Approval, The Acquisition Of Materials Or Components For, Or The Commencement Of Production Or, The Balance Of The Contract Quantity Is At The Sole Risk Of The Contractor. Before First Article Approval, The Costs Thereof Shall Not Be allocated To This Contract For 1) Progress Payments, Or 2) Termination Settlements If The Contract Is Terminated For The Convenience Of The Government. The Contractor Is Responsible For Providing Operating And Maintenance Instructions, Spare Parts, And Repair of The First Article During Any First Article Test. (i) The Contractor Shall Produce Both The First Article And The Production Quantity At The Same Facility And Shall Submit A Certification To The Effect With Each First Article. (j) The Test Report (2 Copies) Shall Be In Accordance With Mil-std-831, Unless Otherwise Specified On The Dd1423, And Shall Be Submitted Via The Cognizant Dcmc To Navsup, Attn: (cite Name And Code In Block 10.a Of The Sf33). The Dcmc Shall Provide Comments On form Dd1222 (2 Copies) Which Shall Be Forwarded With The Test Report. Approval Of The Test Report Is The Pco's Responsibility. Upon Notification Of Approval, Condition Approval, The Aco Shall Execute The Dd250 To Indicate Government Acceptance Of The Test report. 4.10 Alternate Offers - Waiver Of First Article Approval Requirements. (the Following Provisions Supersede Any Waiver Of First Article Approval Requirements Terms Set Forth In Clause 52.209-3 Or 52.209-4 As Appropriate) (a) Unless Otherwise Specified In The Solicitation, Navsup Wss Reserves The Right To Waive The First Article Approval Requirements Specified Herein For Offerors Who Have Previously Furnished Identical Production Articles Accepted By The Government Or The original Equipment Manufacturer/prime Manufacturer. An Offeror Requesting Waiver Of First Article Requirements Shall Submit Evidence With Its Offer Establishing That: (i) The Last Production Unit Was Delivered Within Three (3) Years Of The Issue Date Of This Solicitation, And (ii) The Production Location To Be Used For This Requirement Is The Same As Used For The Previous Production Run. additionally, The Offeror Shall Submit A Certification, To Be Executed By The Officer Or Employee For The Offer, Stating That: (i) The Articles To Be Provided Will Be Produced Using The Same Facilities, Processes, Sequences Of Operations And Approved Subcontractors As Those Previously Delivered And Accepted By The Government Or The Original Equipment Manufacturer/prime Manufacturer, and (ii) The Previous Production Units Were Manufactured Without Material Review Board Disposition Or Waiver/deviation Request Or Rejection Of Pre-production Samples For Cause. (note: This Certification Concerns A Matter Within The Jurisdiction Of An Agency Of The United States And The Making Of A False, Fictitious, Or Fraudulent Certification May Render The Maker Subject To Prosecution Under Title 18, United States code, Section 1001.) (b) Offerors Requesting Waiver Of First Article Approval Requirements Under The Provisions Of This Clause Are Cautioned To Submit Two Prices For Articles Required Herein - One That Is Based On Compliance With The First Article Approval Requirements And one That Is Based On A Waiver Of Such Requirements. Where An Offeror Submits Only One Price And Fails To Clearly State That The Price Is Based On Waiver Of The First Article Approval Requirements It Will Be Deemed To Be Based On Compliance With The First article Approval Requirements (c) In The Event Of The First Article Approval Requirement Is Granted, The Delivery Schedule For The Production Items Shall Be Reduced By The Number Of Days Designated For Delivery Of First Article Test Unit Plus The Number Of Calendar Days Indicated For The government Notification Of Conditional Approval Or Approval. These Requirements Are Specified In The Quality Assurance Section Of This Solicitation. If The Offeror Is Unable To Meet The Desired Schedule, He Shall Insert Below The Alternate Delivery Schedule he Offers To The Government. Offeror's Proposed Alternate Delivery Schedule (based On Waiver Of First Article Approval Requirements) within Days: item No. _____________ Quantity:_______ After Date Of Contract:_________ 4.11 . Mandatory Inspection Requirements: 100% Procurement Contracting Officer (pco) Mandatory Inspection Is Required And Shall Be Accomplished At Source Under The Surveillance And Final Approval Of The Cognizant Dcmao Quality Assurance Representative (qar). during Production, Mandatory Inspection Is Required To Be Accomplished By The Contractor As Follows: A. Level Of Inspection (loi). 1. Critical Characteristics: 100% Inspection Shall Apply. 2. Major And Minor Characteristics: Loi Shall Be In Accordance With A Sampling Plan Acceptable To The Qar. B. Critical Characteristics: ;the Contractor Shall Accomplish 100% Inspection And/or Testing Of All Critical,and/or Requirements Identified In The Drawings, Drawing Notes, And Process And Results Shall Consist Of Actual Dimensions, Measurements, And Test Outcomes Andincluded In The first Article Test Report. certifications To Be On File For A Minimum Of Seven Years After Delivery Of Contract.; C. Major And Minor Characteristics 1. Shall Be Defined By The Contractor Subject To Qar Concurrence, Unless Defined On Applicable Drawings And Associated Specifications. 4.12 Special Inspection Requirements ( ;n/a; ) Magnetic Particle Inspection ( ;applies; ) Surface Inspection ( ;applies. Liquid; ) Penetrant Inspection ( ;n/a; ) Radiographic Inspection ( ;applies; ) Ultrsonic Inspection ( ;n/a; ) High Shock Test ( ;n/a; ) Mechanical Vibration Test 4.13 Final Inspection Requirement:due To The Critical Nature Of This Item, Representatives Of The Buying office/and The Cognizant Field Activity, Nawc Lakehurst, Shall Be Notified By The Successful Contractor At Least 14 Days Prior To Presentation To The Dcm Qar Of The Items For Final Inspection So That They May Have The Option Of witnessing The Final Inspection. The Contractor Shall Notify By Email Or telefax Pco And Nawc Lakehurst Qa ;lonnie White Nawc Qa Rep At Fax (732) 323-4986; To Arrange For The Final Inspection.the Authority Of The Qar Shall Not Be Abrogated. If The Notification Is Not Given To Both Sites Then The Qar Shall Not Accept The Units. quality Assurance Requirements 1. First Article Testing: the Contractor Shall Conduct First Article Testing On This Item Of Alre/se And Must Address All Elements Listed Below And Prepare A First Article Test Report Documenting The Outcome. Unless Otherwise Specified, The Report And Its Acceptance Shall Be Per The provisions Of The Applicable Contract Data Requirements List (cdrl). a. Requirements: i. First Article Quantity Is One (1); In Uncoated Condition. ii. The First Article Shall Be Available For Government Evaluation Per The Contract Schedule. The Evaluation Shall Be Conducted In The Presence Of The Government Personnel. Accordingly, The Contractor Shall Allow Time To Arrange For Nawc Participation In accordance With The "nawcadlke Inspection Witness Option"; iii. The Contractor Shall Provide Facilities And Personnel Sufficient To Conduct All Necessary Tests To Establish Conformance; iv. The Contractor Shall Have Available For Review All Certifications, Test Repin-process Inspection Documents Needed To Substantiate Product Quality; This Same Documentation Shall Also Be Included In The First Article Test Report; v. The Contractor Shall, At The Time Of First Article, Have Corrected Any Problareas Deemed Significant And Documented As Deficient By The Government Within His/her Quality Assurance System Not Previously Identified During Prior Evaluations And/or Surveys; Any problems Identified During The Conduct Of The Test Will Also Require Correction. b. Testing And Evaluation: i. The Contractor Shall Accomplish 100% Inspection And/or Testing Of All Critic Major, And Minor Dimensions And/or Requirements Identified In The Drawings, Drawing Notes, And Process And Fabrication Specifications. Results Shall Consist Of Actual Dimensions, measurements, And Test Outcomes And Shall Be Recorded And Included In The First Article Test Report. c. Acceptance/reject Criteria: i. Satisfactorily Meeting All Requirements Cited In Paragraph 7a And Satisfactorily Demonstrating 100% Conformance To The Test And Evaluation Elements Cited In Paragraph 7.b Shall Constitute Acceptance Of The First Article. ii. Failure To Meet Any Of The Conditions In Paragraph 7.a And 7.b Shall Be Cause For Rejection. d. Delivery: i. The Accepted First Article Exhibit May Be Delivered And Counted Along With The Contract Production Quantities Providing The Item Has Not Been Damaged During Testing, And Has Been Found To Be Conforming; ii. The Contractor Is Responsible For Preparing The First Article Test Report In Accordance With Cdrl's. /2. Production Lot Special Tests: N/a 3. For Purposes Of This Tdr, The Term Ndt Shall Refer To The Following Methods: Mt - Magnetic Particle Testing, Pt - Penetrant Inspection, Ut - Ultrasonic Testing, Rt - Radiographic Testing, And Vt - Visual Testing. 4. Companies Performing Ndt Shall Be Nadcap Accredited, Or A Laboratory Accredited By One Of The Organizations Listed Below As Satisfying Iso 17025 (general Requirements For The Competence Of Testing And Calibration Laboratories). Ndt Certificates Shall Be Bear the Symbols Of Accreditationand The Accreditation Body. a. American Association For Laboratory Accreditation (a2la) b. Ansi National Accreditation Board (anab) c. International Accreditation Service, Inc. (ias) d. National Voluntary Laboratory Accreditation Program (nvlap) e. Perry Johnson Laboratory Accreditation, Inc. (pjla) f. Canadian Association For Laboratory Accreditation Inc. (cala) g. Standards Council Of Canada (scc) 5. Packaging- Mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes - Not Applicable this Is A Alre Critical Safety Item. For Drawing Updates, See Attached Nawc Lke Drawing Update Sheet. navsup Reference Only: Procurement Tdr 23-10116a, the Components Being Acquired Under This Solicitation Have Been Classified As "critical" Requiring Engineering Source Approval By Naval Air Systems Command Only Those Companies Who Have Subm& Been Approved Will Be Eligible For Award Under This Solicitation Any company Submit A Source Approval Request As Outlined In This Solicitation. \ date Of First Submission=asreq 16. Remarks Inspection/certification Data Needed To Substantiate The Quality Of The First Article Test Unit Shall Be Included In First Article Unit Packaging. The Outside Of The Package That Contains The Data Shallbe Clearly Marked "inspection/certification Data included". data Requirements: a. Copies Of All Approved Requests For Variations. b. Torque Per Drawings 34000d1532801, 34000d1532802,34000d1532803. c. Material And Mill Certifications Per Specification, 34000s1580220nd Drawings 34000d1533125, 34000d1530225, 34000d1530216, 34000d1533117,34000d1532961, 34000d1532893, 34000d1532894, 34000d1532960,34000d1562962, 34000d1572525, 34000d1532802,34000d1532804. d. Ultrasonic Inspection Per Drawings 34000d1532804, 34000d1532802. e. Hardness Per Drawings 34000d1532802, 34000d1532804, 34000d1572525. f. Dimensional Inspection Per Drawings 34000d1532802, 34000d1533125,g. Identification Per Drawings 34000d1532802, 34000d1532803,34000d1532804, 34000d1533125, 34000d1530225, 34000d1530216,34000d1533117, 34000d1532961, 34000d1532893, 34000d1532894,34000d1532897, 34000d1532898, 34000d1532960, 34000d1562962,34000d1572525. h. Liquid Penetrant Inspection Per Drawings 34000d1532802,34000d1532804, 34000d1533125, 34000d1530225, 34000d1530216,34000d1533117, 34000d1530223, 34000d1530213. i. Welding Per Navsea S9074-ar-gib-010/278 Per Drawing34000d1530213, 34000d1530223. j. Visual Inspection Of Welds Per Drawing 34000d1562962. date Of First Submission=asreq data Requirements: a. Copies Of All Approved Requests For Variations. b. Torque Per Drawings 34000d1532801, 34000d1532802,4000d1532803. c. Material And Mill Certifications Per Specification, 34000s1580220and Drawings34000d1533125, 34000d1530225, 34000d1530216, 34000d1533117,34000d1532961, 34000d1532893, 34000d1532894, 34000d1532960,34000d1562962, 34000d1572525, 34000d1532802,34000d1532804. d. Ultrasonic Inspection Per Drawings 34000d1532804, 34000d1532802. e. Hardness Per Drawings 34000d1532802, 34000d1532804,34000d1572525. f. Dimensional Inspection Per Drawings 34000d1532802, 34000d1533125, 34000d1530225, 34000d1530216, 34000d1533117, 34000d1532961,34000d1532893, 34000d1532894, 34000d1532897, 34000d1532898,34000d1532960, 34000d1562962, 34000d1572525, 34000d1532804. g. Identification Per Drawings 34000d1532802, 34000d1532803,34000d1532804, 34000d1533125, 34000d1530225, 34000d1530216, 34000d1533117, 34000d1532961, 34000d1532893, 34000d1532894,34000d1532897, 34000d1532898, 34000d1532960, 34000d1562962,34000d1572525. h. Liquid Penetrant Inspection Per Drawings 34000d1532802,34000d1532804, 34000d1533125, 34000d1530225, 34000d1530216,34000d1533117, 34000d1530223, 34000d1530213. i. Welding Per Navsea S9074-ar-gib-010/278 Per Drawing34000d1530213, 34000d1530223. j. Visual Inspection Of Welds Per Drawing 34000d1562962. date Of First Submission=090 Dac the Welding Procedures Will Be Used By The Government To Verify Contractor Designated Welding Responsibilities Implement Weld Procedures For Each Cont Ractor, Subcontractor Or Welding Entity Performing Welding On Specific Work Specifications 16. Remarks (block 5) Data Requirements a. Weld Procedure Iaw Navsea S9074-ar-gib-010/278^ Para 4.2 Per Drawing 34000d1530213 And 34000d1530223. block 13) Date Of Subsequent Submmision: Approval Or Reason For Disapproval Shall Be Given By Navairwarcenacdivlke Via The P.c.o.nlt 45 Days After Disapproval. /(block 14) Addresses For Navair Codes/ navairwarcenacdivlke code Bl14000 Bldg 596 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000/ navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac the Welding Procedures Will Be Used By The Government To Verify Contractor Designated Welding Responsibilities Implement Weld Procedures For Each Cont Ractor, Subcontractor Or Welding Entity Performing Welding On Specific Work Specifications 16. Remarks (block 5 ) Data Requirements a.the Weld Procedure Qualification Test Report, Including All Supporting Test R And Documentation, Iaw Navsea S9074-aq-gib-010/248^ Para 4.2.3 And 4.6 Drawing34000d1530213 And 34000d1530223. (block 13) Date Of Subsequent Submmision: Approval Or Reason For Disapproval Shall Be Given By Navairwarcenacdivlke Via The P.c.o. Nlt 45 Days After Disapproval. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl14000 Bldg 596 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000/ navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=asreq date Of Subsequent Submission=asreq 16. Remarks (block 5) Contract Reference a. Evidence Of Welder Performance Qualification, Including Supporting Test Resudocumentation, Iaw Navsea S9074-aq-gib-010/248^ Para 5.2 Per Drawing 34000d1530213 And 34000d1530223. (block 12) Date Of First Submission - 30 Days Prior To Production. (block 13) Provide Qualification Evidence For All Welders. (block 14) Addresses For Navair Codes: navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks (block 5) Contract Reference a.evidence Of Level Iii Certification Iaw T9074-as-gib-010/271^ Para 1.6 For The Individual Who Approved The Welders Qualification Training Program Iaw Navseas9074-aq-gib-010/248 Para 5.2.3.1, Per Drawing 34000d1530213 And 34000d1530223. (block 14) Addresses For Navair Codes navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks (block 5) Contract Reference a. Visual Inspection Written Procedure To Be Used To Visually Inspect All Weldst9074-as-gib-010/271^ Para 8.3 And 1.7 Thru 1.7.3 Per Drawing 34000d1530213and 34000d1530223. (block 14) Addresses For Navair Codes navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks (block 5) Contract Reference a. Evidence Of Approval Of The Welder Qualification Training Program Iaw Navseas9074-aq-gib-010/248^ Para 5.2.3.1(d), Per Drawing 34000d1530213 And 34000d1530223. (block 14) Addresses For Navair Codes navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000 date Of First Submission=090 Dac 16. Remarks (block 5) Contract Reference b. Evidence Of Maintenance Of Qualification For All Welders Iaw Navsea S9074-aq010/248^ Para 5.2.11 And 5.2.12 Per Drawing 34000d1530213 And 34000d1530223. (block 14) Addresses For Navair Codes navairwarcenacdivlke code Bl32300 Bldg 562 hwy 547 joint Base Mdl, Nj 08733-5000 navairwarcenacdivlke code Bl41600 Bldg 148 hwy 547 joint Base Mdl, Nj 08733-5000

Details: Description Invitation To Bid (cw-02-2025-009) 1. The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas, Through Its Bids And Awards Committee (bac), Invites Contractors To Submit Bids For The Following Contracts 1.1 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Bolbok, Lipa City, Batangas Contract Id No. : 25dd0222 Project Location : Lipa City, Batangas Scope Of Works : Construction Of Two (2) Auditorium (18.00m X 40.00m) Including Structural Works, Architectural Works, Electrical Works, Auxiliary Works And Mechanical Works Approved Budget For The Contract : Php 79,200,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 300 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.2 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building At Barangay Cumba, Lipa City, Batangas Contract Id No. : 25dd0223 Project Location : Lipa City, Batangas Scope Of Works : Construction Of Two (2) Storey Multi-purpose Building (barangay Hall And Gym) Including Demolition, Structural Works, Architectural Works, Plumbing Works, Electrical Works, Mechanical Works, Auxiliary Works And Installation Of 3-100kva Transformer Approved Budget For The Contract : Php 54,450,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 300 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.3 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities, Construction Of Road At Barangay Santo Cristo And Barangay Calansayan, San Jose, Batangas Contract Id No. : 25dd0224 Project Location : San Jose, Batangas Scope Of Works : "brgy. Santo Cristo : Construction Of 547.10 L.m. Road With Varying Width From 2.50m To 3.50m And Thickness Of 0.20m Brgy. Calansayan : Construction Of 1,830.00 L.m. Road With Width Of 3.50m And Thickness Of 0.20m" Approved Budget For The Contract : Php 29,700,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 112 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 25,000.00 1.4 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multipurpose Building (covered Court) In Brgy. Mabalanoy, San Juan, Batangas Contract Id No. : 25dd0225 Project Location : San Juan, Batangas Scope Of Works : Construction Of One (1) Storey Covered Court (28.00m X 18.00m) Including Removal Of Existing Basketball Ring & Board, Removal Of Trees, Structural Works, Finishing Works, Plumbing Works, Electrical Works And Auxiliary Works Approved Budget For The Contract : Php 8,910,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 150 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 10,000.00 1.5 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities, Rehabilitation Of Road Sitio Burol-brgy. Putingkahoy, Rosario, Batangas Contract Id No. : 25dd0226 Project Location : Rosario, Batangas Scope Of Works : Rehabilitation Of 1,047.10 L.m. Road With Varying Width From 4.00m To 5.00m And Thickness Of 0.20m Including Cross Drainage And Grouted Riprap Approved Budget For The Contract : Php 7,425,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 95 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 10,000.00 1.6 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Rehabilitation Of Multi-purpose Building (bepco) Including Facilities, Barangay Don Luis, San Jose, Batangas Contract Id No. : 25dd0227 Project Location : San Jose, Batangas Scope Of Works : Rehabilitation Of Two (2) Storey Multi-purpose Building (13.25m X 9.15m) Including Removal Of Existing Ceiling And Tiles, Tile Works, Ceiling Works, Electrical Works, Painting Works, Replacement Of Plumbing Fixtures, Installation Of Doors & Windows, Fabrication Of Fire Escape Ladder And Installation Of Led Billboard Approved Budget For The Contract : Php 4,950,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 90 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 5,000.00 1.7 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction (completion) Of Multipurpose Building (covered Court) In Brgy. Balagbag, San Juan, Batangas Contract Id No. : 25dd0228 Project Location : San Juan, Batangas Scope Of Works : Construction Of Stage (17.90m X 7.60m) Including Structural Works, Plumbing Works And Auxiliary Works Approved Budget For The Contract : Php 2,970,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 60 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 5,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office, And Inspect The Bidding Documents At Marawoy, Lipa City, Batangas During Weekdays From 08:00 A.m To 05:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Onfebruary 12, 2025to March 04, 2025, 8:00 A.m.-5:00 P.m.; March 05, 2025, 8:00 A.m.-8:15 A.m.from Theaddress Below And Upon Payment Of The Applicable Fee For The Bidding Pursuant To The Latest Guidelines Issued By The Gppb Amounting To The Responding Cost Of Bidding Documents Indicated On The Above Table. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Dpwh Website, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office Will Hold Apre-bid Conference Physically And/or Through Live-streamed On Youtube Onfebruary 21, 2025 At 09:00a.m. At Bidding Room, Dpwh-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas,which Shall Be Open To Prospective Bidders. For Youtube Livestreaming,https://youtube.com/@batangas_4th_deo?si=lsq1bcqacx-uowzq 7. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. For Bids To Be Submitted Electronically/online, The Following Procedures Should Be Observed Following Department Order No. 87, Series Of 2020. It Is Also Indicated In The Bds. 8. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or Atelectronicbids_batangas4@dpwh.gov.phfor Electronic Submission On Or Beforemarch 05, 2025at 08:30 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 9. Bid Opening Shall Be Onmarch 05, 2025at 08:30 A.m. At Bidding Room, Dpwh-batangasiv District Engineering Office, Marawoy, Lipa City, Batangas And Through Live-streamed On Youtube(https://youtube.com/@batangas_4th_deo?si=lsq1bcqacx-uowzq). Bids Will Be Opened In Thepresence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Beaccepted. 10. "if At The Time Of The Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Irr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid." 11. The Dpwh-batangas Iv District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And Section 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. All Representatives Who Will Submit Their Bids Must Be Duly Authorized And Registered Liaison Officers As Reflected In The Contractor Registration Certificate (crc). Authorized Representatives Are Required To Present Their Company Ids And Government Id For Verification Purposes. 13. Please Be Informed That On The Day Of Bid Opening, The Approved Appointment Intended For Purchasing Bidding Documents Will Be Limited To Two (2) Prospective Bidders Only To Strictly Follow The Bid Opening Schedule. Secure The Approved Appointment To Dpwhbats4appointment@gmail.com 14. For Further Information, Please Refer To: Leo S. Matias Engineer Iii Bac, Chairperson Department Of Public Works And Highways Batangas Iv District Engineering Office Brgy. Marawoy, Lipa City, Batangas Telephone No.: (043) 233-05-24 Email Address: Matias.leo@dpwh.gov.ph/ Dpwhbatangas4bac@gmail.com Queen Mariciel J. Sianquita Engineer Ii Head, Bac Secretariat Department Of Public Works And Highways Batangas Iv District Engineering Office Brgy. Marawoy, Lipa City, Batangas Telephone No.: (043) 233-05-24 Email Address: Sianquita.queen_mariciel@dpwh.gov.ph/ Dpwhbatangas4bac@gmail.com 15. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph & Www.philgeps.gov.ph For Online Bid Submission At Electronicbids_batangas4@dpwh.gov.ph February 11, 2025 Approved By: Leo S. Matias Bac, Chairperson Noted By: Jehela G. Roxas District Engineer Date Of Publication: February 12, 2025 To February 18, 2025 Publication: Dpwh Website/ Philgeps

Details: Description Invitation To Bid (cw-02-2025-009) 1. The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas, Through Its Bids And Awards Committee (bac), Invites Contractors To Submit Bids For The Following Contracts 1.1 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Bolbok, Lipa City, Batangas Contract Id No. : 25dd0222 Project Location : Lipa City, Batangas Scope Of Works : Construction Of Two (2) Auditorium (18.00m X 40.00m) Including Structural Works, Architectural Works, Electrical Works, Auxiliary Works And Mechanical Works Approved Budget For The Contract : Php 79,200,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 300 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.2 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building At Barangay Cumba, Lipa City, Batangas Contract Id No. : 25dd0223 Project Location : Lipa City, Batangas Scope Of Works : Construction Of Two (2) Storey Multi-purpose Building (barangay Hall And Gym) Including Demolition, Structural Works, Architectural Works, Plumbing Works, Electrical Works, Mechanical Works, Auxiliary Works And Installation Of 3-100kva Transformer Approved Budget For The Contract : Php 54,450,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 300 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.3 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities, Construction Of Road At Barangay Santo Cristo And Barangay Calansayan, San Jose, Batangas Contract Id No. : 25dd0224 Project Location : San Jose, Batangas Scope Of Works : "brgy. Santo Cristo : Construction Of 547.10 L.m. Road With Varying Width From 2.50m To 3.50m And Thickness Of 0.20m Brgy. Calansayan : Construction Of 1,830.00 L.m. Road With Width Of 3.50m And Thickness Of 0.20m" Approved Budget For The Contract : Php 29,700,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 112 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 25,000.00 1.4 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multipurpose Building (covered Court) In Brgy. Mabalanoy, San Juan, Batangas Contract Id No. : 25dd0225 Project Location : San Juan, Batangas Scope Of Works : Construction Of One (1) Storey Covered Court (28.00m X 18.00m) Including Removal Of Existing Basketball Ring & Board, Removal Of Trees, Structural Works, Finishing Works, Plumbing Works, Electrical Works And Auxiliary Works Approved Budget For The Contract : Php 8,910,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 150 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 10,000.00 1.5 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities, Rehabilitation Of Road Sitio Burol-brgy. Putingkahoy, Rosario, Batangas Contract Id No. : 25dd0226 Project Location : Rosario, Batangas Scope Of Works : Rehabilitation Of 1,047.10 L.m. Road With Varying Width From 4.00m To 5.00m And Thickness Of 0.20m Including Cross Drainage And Grouted Riprap Approved Budget For The Contract : Php 7,425,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 95 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 10,000.00 1.6 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Rehabilitation Of Multi-purpose Building (bepco) Including Facilities, Barangay Don Luis, San Jose, Batangas Contract Id No. : 25dd0227 Project Location : San Jose, Batangas Scope Of Works : Rehabilitation Of Two (2) Storey Multi-purpose Building (13.25m X 9.15m) Including Removal Of Existing Ceiling And Tiles, Tile Works, Ceiling Works, Electrical Works, Painting Works, Replacement Of Plumbing Fixtures, Installation Of Doors & Windows, Fabrication Of Fire Escape Ladder And Installation Of Led Billboard Approved Budget For The Contract : Php 4,950,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 90 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 5,000.00 1.7 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction (completion) Of Multipurpose Building (covered Court) In Brgy. Balagbag, San Juan, Batangas Contract Id No. : 25dd0228 Project Location : San Juan, Batangas Scope Of Works : Construction Of Stage (17.90m X 7.60m) Including Structural Works, Plumbing Works And Auxiliary Works Approved Budget For The Contract : Php 2,970,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 60 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 5,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office, And Inspect The Bidding Documents At Marawoy, Lipa City, Batangas During Weekdays From 08:00 A.m To 05:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Onfebruary 12, 2025to March 04, 2025, 8:00 A.m.-5:00 P.m.; March 05, 2025, 8:00 A.m.-8:15 A.m.from Theaddress Below And Upon Payment Of The Applicable Fee For The Bidding Pursuant To The Latest Guidelines Issued By The Gppb Amounting To The Responding Cost Of Bidding Documents Indicated On The Above Table. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Dpwh Website, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office Will Hold Apre-bid Conference Physically And/or Through Live-streamed On Youtube Onfebruary 21, 2025 At 09:00a.m. At Bidding Room, Dpwh-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas,which Shall Be Open To Prospective Bidders. For Youtube Livestreaming,https://youtube.com/@batangas_4th_deo?si=lsq1bcqacx-uowzq 7. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. For Bids To Be Submitted Electronically/online, The Following Procedures Should Be Observed Following Department Order No. 87, Series Of 2020. It Is Also Indicated In The Bds. 8. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or Atelectronicbids_batangas4@dpwh.gov.phfor Electronic Submission On Or Beforemarch 05, 2025at 08:30 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 9. Bid Opening Shall Be Onmarch 05, 2025at 08:30 A.m. At Bidding Room, Dpwh-batangasiv District Engineering Office, Marawoy, Lipa City, Batangas And Through Live-streamed On Youtube(https://youtube.com/@batangas_4th_deo?si=lsq1bcqacx-uowzq). Bids Will Be Opened In Thepresence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Beaccepted. 10. "if At The Time Of The Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Irr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid." 11. The Dpwh-batangas Iv District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And Section 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. All Representatives Who Will Submit Their Bids Must Be Duly Authorized And Registered Liaison Officers As Reflected In The Contractor Registration Certificate (crc). Authorized Representatives Are Required To Present Their Company Ids And Government Id For Verification Purposes. 13. Please Be Informed That On The Day Of Bid Opening, The Approved Appointment Intended For Purchasing Bidding Documents Will Be Limited To Two (2) Prospective Bidders Only To Strictly Follow The Bid Opening Schedule. Secure The Approved Appointment To Dpwhbats4appointment@gmail.com 14. For Further Information, Please Refer To: Leo S. Matias Engineer Iii Bac, Chairperson Department Of Public Works And Highways Batangas Iv District Engineering Office Brgy. Marawoy, Lipa City, Batangas Telephone No.: (043) 233-05-24 Email Address: Matias.leo@dpwh.gov.ph/ Dpwhbatangas4bac@gmail.com Queen Mariciel J. Sianquita Engineer Ii Head, Bac Secretariat Department Of Public Works And Highways Batangas Iv District Engineering Office Brgy. Marawoy, Lipa City, Batangas Telephone No.: (043) 233-05-24 Email Address: Sianquita.queen_mariciel@dpwh.gov.ph/ Dpwhbatangas4bac@gmail.com 15. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph & Www.philgeps.gov.ph For Online Bid Submission At Electronicbids_batangas4@dpwh.gov.ph February 11, 2025 Approved By: Leo S. Matias Bac, Chairperson Noted By: Jehela G. Roxas District Engineer Date Of Publication: February 12, 2025 To February 18, 2025 Publication: Dpwh Website/ Philgeps

Details: Description Invitation To Bid (cw-02-2025-009) 1. The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas, Through Its Bids And Awards Committee (bac), Invites Contractors To Submit Bids For The Following Contracts 1.1 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Bolbok, Lipa City, Batangas Contract Id No. : 25dd0222 Project Location : Lipa City, Batangas Scope Of Works : Construction Of Two (2) Auditorium (18.00m X 40.00m) Including Structural Works, Architectural Works, Electrical Works, Auxiliary Works And Mechanical Works Approved Budget For The Contract : Php 79,200,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 300 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.2 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building At Barangay Cumba, Lipa City, Batangas Contract Id No. : 25dd0223 Project Location : Lipa City, Batangas Scope Of Works : Construction Of Two (2) Storey Multi-purpose Building (barangay Hall And Gym) Including Demolition, Structural Works, Architectural Works, Plumbing Works, Electrical Works, Mechanical Works, Auxiliary Works And Installation Of 3-100kva Transformer Approved Budget For The Contract : Php 54,450,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 300 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.3 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities, Construction Of Road At Barangay Santo Cristo And Barangay Calansayan, San Jose, Batangas Contract Id No. : 25dd0224 Project Location : San Jose, Batangas Scope Of Works : "brgy. Santo Cristo : Construction Of 547.10 L.m. Road With Varying Width From 2.50m To 3.50m And Thickness Of 0.20m Brgy. Calansayan : Construction Of 1,830.00 L.m. Road With Width Of 3.50m And Thickness Of 0.20m" Approved Budget For The Contract : Php 29,700,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 112 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 25,000.00 1.4 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multipurpose Building (covered Court) In Brgy. Mabalanoy, San Juan, Batangas Contract Id No. : 25dd0225 Project Location : San Juan, Batangas Scope Of Works : Construction Of One (1) Storey Covered Court (28.00m X 18.00m) Including Removal Of Existing Basketball Ring & Board, Removal Of Trees, Structural Works, Finishing Works, Plumbing Works, Electrical Works And Auxiliary Works Approved Budget For The Contract : Php 8,910,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 150 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 10,000.00 1.5 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities, Rehabilitation Of Road Sitio Burol-brgy. Putingkahoy, Rosario, Batangas Contract Id No. : 25dd0226 Project Location : Rosario, Batangas Scope Of Works : Rehabilitation Of 1,047.10 L.m. Road With Varying Width From 4.00m To 5.00m And Thickness Of 0.20m Including Cross Drainage And Grouted Riprap Approved Budget For The Contract : Php 7,425,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 95 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 10,000.00 1.6 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Rehabilitation Of Multi-purpose Building (bepco) Including Facilities, Barangay Don Luis, San Jose, Batangas Contract Id No. : 25dd0227 Project Location : San Jose, Batangas Scope Of Works : Rehabilitation Of Two (2) Storey Multi-purpose Building (13.25m X 9.15m) Including Removal Of Existing Ceiling And Tiles, Tile Works, Ceiling Works, Electrical Works, Painting Works, Replacement Of Plumbing Fixtures, Installation Of Doors & Windows, Fabrication Of Fire Escape Ladder And Installation Of Led Billboard Approved Budget For The Contract : Php 4,950,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 90 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 5,000.00 1.7 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction (completion) Of Multipurpose Building (covered Court) In Brgy. Balagbag, San Juan, Batangas Contract Id No. : 25dd0228 Project Location : San Juan, Batangas Scope Of Works : Construction Of Stage (17.90m X 7.60m) Including Structural Works, Plumbing Works And Auxiliary Works Approved Budget For The Contract : Php 2,970,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 60 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 5,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office, And Inspect The Bidding Documents At Marawoy, Lipa City, Batangas During Weekdays From 08:00 A.m To 05:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Onfebruary 12, 2025to March 04, 2025, 8:00 A.m.-5:00 P.m.; March 05, 2025, 8:00 A.m.-8:15 A.m.from Theaddress Below And Upon Payment Of The Applicable Fee For The Bidding Pursuant To The Latest Guidelines Issued By The Gppb Amounting To The Responding Cost Of Bidding Documents Indicated On The Above Table. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Dpwh Website, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office Will Hold Apre-bid Conference Physically And/or Through Live-streamed On Youtube Onfebruary 21, 2025 At 09:00a.m. At Bidding Room, Dpwh-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas,which Shall Be Open To Prospective Bidders. For Youtube Livestreaming,https://youtube.com/@batangas_4th_deo?si=lsq1bcqacx-uowzq 7. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. For Bids To Be Submitted Electronically/online, The Following Procedures Should Be Observed Following Department Order No. 87, Series Of 2020. It Is Also Indicated In The Bds. 8. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or Atelectronicbids_batangas4@dpwh.gov.phfor Electronic Submission On Or Beforemarch 05, 2025at 08:30 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 9. Bid Opening Shall Be Onmarch 05, 2025at 08:30 A.m. At Bidding Room, Dpwh-batangasiv District Engineering Office, Marawoy, Lipa City, Batangas And Through Live-streamed On Youtube(https://youtube.com/@batangas_4th_deo?si=lsq1bcqacx-uowzq). Bids Will Be Opened In Thepresence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Beaccepted. 10. "if At The Time Of The Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Irr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid." 11. The Dpwh-batangas Iv District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And Section 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. All Representatives Who Will Submit Their Bids Must Be Duly Authorized And Registered Liaison Officers As Reflected In The Contractor Registration Certificate (crc). Authorized Representatives Are Required To Present Their Company Ids And Government Id For Verification Purposes. 13. Please Be Informed That On The Day Of Bid Opening, The Approved Appointment Intended For Purchasing Bidding Documents Will Be Limited To Two (2) Prospective Bidders Only To Strictly Follow The Bid Opening Schedule. Secure The Approved Appointment To Dpwhbats4appointment@gmail.com 14. For Further Information, Please Refer To: Leo S. Matias Engineer Iii Bac, Chairperson Department Of Public Works And Highways Batangas Iv District Engineering Office Brgy. Marawoy, Lipa City, Batangas Telephone No.: (043) 233-05-24 Email Address: Matias.leo@dpwh.gov.ph/ Dpwhbatangas4bac@gmail.com Queen Mariciel J. Sianquita Engineer Ii Head, Bac Secretariat Department Of Public Works And Highways Batangas Iv District Engineering Office Brgy. Marawoy, Lipa City, Batangas Telephone No.: (043) 233-05-24 Email Address: Sianquita.queen_mariciel@dpwh.gov.ph/ Dpwhbatangas4bac@gmail.com 15. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph & Www.philgeps.gov.ph For Online Bid Submission At Electronicbids_batangas4@dpwh.gov.ph February 11, 2025 Approved By: Leo S. Matias Bac, Chairperson Noted By: Jehela G. Roxas District Engineer Date Of Publication: February 12, 2025 To February 18, 2025 Publication: Dpwh Website/ Philgeps

Details: Description Invitation To Bid (cw-02-2025-009) 1. The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas, Through Its Bids And Awards Committee (bac), Invites Contractors To Submit Bids For The Following Contracts 1.1 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building, Barangay Bolbok, Lipa City, Batangas Contract Id No. : 25dd0222 Project Location : Lipa City, Batangas Scope Of Works : Construction Of Two (2) Auditorium (18.00m X 40.00m) Including Structural Works, Architectural Works, Electrical Works, Auxiliary Works And Mechanical Works Approved Budget For The Contract : Php 79,200,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 300 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.2 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multi-purpose Building At Barangay Cumba, Lipa City, Batangas Contract Id No. : 25dd0223 Project Location : Lipa City, Batangas Scope Of Works : Construction Of Two (2) Storey Multi-purpose Building (barangay Hall And Gym) Including Demolition, Structural Works, Architectural Works, Plumbing Works, Electrical Works, Mechanical Works, Auxiliary Works And Installation Of 3-100kva Transformer Approved Budget For The Contract : Php 54,450,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 300 Calendar Days Size Range : Medium A License Category : B Amount Of Bidding Documents : Php 50,000.00 1.3 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities, Construction Of Road At Barangay Santo Cristo And Barangay Calansayan, San Jose, Batangas Contract Id No. : 25dd0224 Project Location : San Jose, Batangas Scope Of Works : "brgy. Santo Cristo : Construction Of 547.10 L.m. Road With Varying Width From 2.50m To 3.50m And Thickness Of 0.20m Brgy. Calansayan : Construction Of 1,830.00 L.m. Road With Width Of 3.50m And Thickness Of 0.20m" Approved Budget For The Contract : Php 29,700,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 112 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 25,000.00 1.4 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction Of Multipurpose Building (covered Court) In Brgy. Mabalanoy, San Juan, Batangas Contract Id No. : 25dd0225 Project Location : San Juan, Batangas Scope Of Works : Construction Of One (1) Storey Covered Court (28.00m X 18.00m) Including Removal Of Existing Basketball Ring & Board, Removal Of Trees, Structural Works, Finishing Works, Plumbing Works, Electrical Works And Auxiliary Works Approved Budget For The Contract : Php 8,910,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 150 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 10,000.00 1.5 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities, Rehabilitation Of Road Sitio Burol-brgy. Putingkahoy, Rosario, Batangas Contract Id No. : 25dd0226 Project Location : Rosario, Batangas Scope Of Works : Rehabilitation Of 1,047.10 L.m. Road With Varying Width From 4.00m To 5.00m And Thickness Of 0.20m Including Cross Drainage And Grouted Riprap Approved Budget For The Contract : Php 7,425,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 95 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 10,000.00 1.6 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Rehabilitation Of Multi-purpose Building (bepco) Including Facilities, Barangay Don Luis, San Jose, Batangas Contract Id No. : 25dd0227 Project Location : San Jose, Batangas Scope Of Works : Rehabilitation Of Two (2) Storey Multi-purpose Building (13.25m X 9.15m) Including Removal Of Existing Ceiling And Tiles, Tile Works, Ceiling Works, Electrical Works, Painting Works, Replacement Of Plumbing Fixtures, Installation Of Doors & Windows, Fabrication Of Fire Escape Ladder And Installation Of Led Billboard Approved Budget For The Contract : Php 4,950,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 90 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 5,000.00 1.7 Name Of Contract : Convergence And Special Support Program, Basic Infrastruture Program (bip), Multi-purpose Buildings/ Facilities To Support Social Services, Construction (completion) Of Multipurpose Building (covered Court) In Brgy. Balagbag, San Juan, Batangas Contract Id No. : 25dd0228 Project Location : San Juan, Batangas Scope Of Works : Construction Of Stage (17.90m X 7.60m) Including Structural Works, Plumbing Works And Auxiliary Works Approved Budget For The Contract : Php 2,970,000.00 Source Of Funds : Fy 2025 General Appropriations Act (gaa) Contract Duration : 60 Calendar Days Size Range : Small B License Category : C & D Amount Of Bidding Documents : Php 5,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office, And Inspect The Bidding Documents At Marawoy, Lipa City, Batangas During Weekdays From 08:00 A.m To 05:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Onfebruary 12, 2025to March 04, 2025, 8:00 A.m.-5:00 P.m.; March 05, 2025, 8:00 A.m.-8:15 A.m.from Theaddress Below And Upon Payment Of The Applicable Fee For The Bidding Pursuant To The Latest Guidelines Issued By The Gppb Amounting To The Responding Cost Of Bidding Documents Indicated On The Above Table. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Dpwh Website, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh)-batangas Iv District Engineering Office Will Hold Apre-bid Conference Physically And/or Through Live-streamed On Youtube Onfebruary 21, 2025 At 09:00a.m. At Bidding Room, Dpwh-batangas Iv District Engineering Office, Marawoy, Lipa City, Batangas,which Shall Be Open To Prospective Bidders. For Youtube Livestreaming,https://youtube.com/@batangas_4th_deo?si=lsq1bcqacx-uowzq 7. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. For Bids To Be Submitted Electronically/online, The Following Procedures Should Be Observed Following Department Order No. 87, Series Of 2020. It Is Also Indicated In The Bds. 8. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or Atelectronicbids_batangas4@dpwh.gov.phfor Electronic Submission On Or Beforemarch 05, 2025at 08:30 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 9. Bid Opening Shall Be Onmarch 05, 2025at 08:30 A.m. At Bidding Room, Dpwh-batangasiv District Engineering Office, Marawoy, Lipa City, Batangas And Through Live-streamed On Youtube(https://youtube.com/@batangas_4th_deo?si=lsq1bcqacx-uowzq). Bids Will Be Opened In Thepresence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Beaccepted. 10. "if At The Time Of The Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Irr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid." 11. The Dpwh-batangas Iv District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And Section 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. All Representatives Who Will Submit Their Bids Must Be Duly Authorized And Registered Liaison Officers As Reflected In The Contractor Registration Certificate (crc). Authorized Representatives Are Required To Present Their Company Ids And Government Id For Verification Purposes. 13. Please Be Informed That On The Day Of Bid Opening, The Approved Appointment Intended For Purchasing Bidding Documents Will Be Limited To Two (2) Prospective Bidders Only To Strictly Follow The Bid Opening Schedule. Secure The Approved Appointment To Dpwhbats4appointment@gmail.com 14. For Further Information, Please Refer To: Leo S. Matias Engineer Iii Bac, Chairperson Department Of Public Works And Highways Batangas Iv District Engineering Office Brgy. Marawoy, Lipa City, Batangas Telephone No.: (043) 233-05-24 Email Address: Matias.leo@dpwh.gov.ph/ Dpwhbatangas4bac@gmail.com Queen Mariciel J. Sianquita Engineer Ii Head, Bac Secretariat Department Of Public Works And Highways Batangas Iv District Engineering Office Brgy. Marawoy, Lipa City, Batangas Telephone No.: (043) 233-05-24 Email Address: Sianquita.queen_mariciel@dpwh.gov.ph/ Dpwhbatangas4bac@gmail.com 15. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph & Www.philgeps.gov.ph For Online Bid Submission At Electronicbids_batangas4@dpwh.gov.ph February 11, 2025 Approved By: Leo S. Matias Bac, Chairperson Noted By: Jehela G. Roxas District Engineer Date Of Publication: February 12, 2025 To February 18, 2025 Publication: Dpwh Website/ Philgeps