Fabrication Tenders

Details: Description 1. The Municipality Of Pola, Province Of Oriental Mindoro Through The Trust Fund Intends To Apply The Sum Of One Million Nine Hundred Ninety-four Thousand Six Hundred Seventy Pesos (php 1,994,670.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of Common Goods, Tools And Equipment For (various Individual Livelihood Projects), With The Following Details: Lot No. Item Description Approved Budget For The Contract Lot 1 Supply And Delivery Of Fishing/motorized Banca Php619,250.00 Lot 2 Supply And Delivery Of Fishing Paraphernalia Php246,055.00 Lot 3 Supply And Delivery Of Materials And Equipment For Welding And Vulcanized Shop Php262,300.00 Lot 5 Supply And Delivery Of Common Goods For Various Livelihood Projects Php445,125.00 Lot 6 Supply And Delivery Of Fabricated Negocart, Tri Bike, Cartwheel And Food Warmer For Various Livelihood Projects Php421,940.00 Total Php1,994,670.00 (bids Exceeding These Amounts Shall Be Automatically Rejected At Bid Opening Or During Bid Evaluation) 2. The Municipality Of Pola, Province Of Oriental Mindoro Now Invites Bids For The Above Procurement Project. Delivery Of Goods Is Required Within Thirty (30) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed Within Five (5) Years From The Date Of Submission And Receipt Of Bids A Single Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Municipality Of Pola, Oriental Mindoro And Inspect The Bidding Documents At The Address Given Below From (8:00 A.m. To 5:00 P.m.). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On Feb.15-21-24, 2025 From Given Address And May Also Be Downloaded From The Website Of Philippine Government Electronic Procurement System (philgeps), And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. Note: Bidders May Submit A Bid On Any Or Both Lots. Bidders Shall Pay The Amount Of The Bidding Documents Fee Corresponding To The Total Abc It Shall Submit A Bid. 6. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address As Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, Or (iii) Both} On Or Before Feb.21, 2025, 1:30 P.m. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 8. Bid Opening Shall Be On Feb.21, 2025 2:00 P.m. At The Municipal Mayor’s Conference Hall. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. [insert Such Other Necessary Information Deemed Relevant By The Procuring Entity Such As The Use Of A Back-up Data Or Cloud Storage For Large Files Uploaded For Online Bid Submissions] 10. The Municipality Of Pola, Oriental Mindoro Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Maricel E. Damayan Bids And Awards Committee Secretariat Municipality Of Pola Polabac@gmail.com 09151434079 Engr. Nathaniel C. Marte Bac- Chairperson Municipal Engineer Pola, Oriental Mindoro

Details: Description Invitation To Bid January 27, 2025 1. The Dpwh- Quirino District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of ₱4,950,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Project Stated Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh- Quirino District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 1 Name Of Project/location : Basic Infrastructure Program (bip) - Multi-purpose Building/ Facilities To Support Social Services - Construction Of Multi-purpose Building, Barangay San Leonardo, Aglipay, Quirino Contract I.d. : 25bk0063 Brief Project Description 1 Storey Multi-purpose Building Scope Of Works : Construction Of Multi-purpose Building Other General Requirements • Permits And Clearances • Project Billboard/signboard • Occupational Safety And Health • Mobilization / Demobilization Earthworks • Removal Of Structures And Obstruction • Structure Excavation, Common Soil • Embankment From Roadway/structure Excavation, Common Soil • Embankment From Borrow, Common Soil • Gravel Fill Reinforced Concrete • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed), Grade 40 • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Storm Drainage And Downspout • Fabricated Metal Roofing Accessory, Gauge 26 (0.551 Mm), Flashings • Fabricated Metal Roofing Accessory, Gauge 24 (0.701 Mm), Gutters • Prepainted Metal Sheets, Above 0.427 Mm, Rib Type, Long Span • Cement Plaster Finish • Painting Works, Masonry/concrete • Painting Works, Steel • Perforated Ceiling Panel • Chb Non Load Bearing (including Reinforcing Steel), 100mm • Chb Non Load Bearing (including Reinforcing Steel), 150mm • Metal Structure Accessories, Turnbuckle • Metal Structure Accessories, Bolts And Rods • Metal Structure Accessories, Sagrods • Metal Structure Accessories, Cross Bracing • Metal Structure Accessories, Steel Plates • Structural Steel • Structural Steel, Trusses • Structural Steel, Purlins • Railing Electrical • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Lighting Fixtures And Lamps Approved Budget For The Contract (abc) : ₱4,950,000.00 Project Duration : 167 Calendar Days Cost Of Bidding Documents : ₱5,000.00 Pcab License Category C&d (size Range : Small B) 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category (see Table Above). The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15-2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh- Quirino District Engineering Office And Inspect The Bidding Documents At Procurement Unit Office, Dpwh Quirino District Engineering Office During Weekdays From January 29, 2025 - February 19, 2025. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 29, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Stated Above. Pursuant To Section 17.5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh- Quirino District Engineering Office Will Hold A Pre-bid Conference On February 5, 2025 9:00 A.m. Via Zoom Meeting Id: 460 121 7399 Passcode: Pru_24 At Conference Room, Dpwh Quirino District Engineering Office And Through Live-stream On Youtube Channel: Www.youtube.com/@dpwh.quirino.districteo, Which Shall Be Open To Prospective Bidders. 11. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_quirino@dpwh.gov.ph For Electronic Submission On Or Before February 19, 2025 Not Later Than 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 13. Bid Opening Shall Be On February 19, 2025 Immediately After The Deadline Of Submission Of Bids, Via Zoom (same Id And Passcode With The Pre-bid Conference) At Conference Room, Dpwh Quirino District Engineering Office And Through Live-stream On Youtube Channel: Https://www.youtube.com/@dpwhquirinodeoproclivestream. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 14. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 15. If At The Time Of The Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii)(c) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No.9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid. 16. The Dpwh- Quirino District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 17. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Www.youtube.com/@dpwh.quirino.districteo For Online Bid Submission: Electronicbids_quirino@dpwh.gov.ph 18. For Further Information, Please Refer To: Brenda B. Carbonel Head, Procurement Staff Email Address: Carbonel.brenda@dpwh.gov.ph

Details: Description Invitation To Bid For Construction Of Multi-purpose Building (municipal Compound) At Santiago, Naujan, Oriental Mindoro 1. The Provincial Government Of Oriental Mindoro (pgom), Through The 20% Development Fund 2024 Intends To Apply The Sum Of Nineteen Million Nine Hundred Ninety Four Thousand Five Hundred Seventy Five Pesos And 93/100 (php 19,994,575.93) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “construction Of Multi-purpose Building (municipal Compound) At Santiago, Naujan, Oriental Mindoro (ib No. Cw-2025-007)”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro (pgom) Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 318 Calendar Days. Bidders Should Have A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Description Qty/unit A.1.1(3) B.3 B.7 (1) B.5 800(1) 803(1)a 804(1)a 804(1)b 804(4) 807(7) 900(1)c2 900(1)c3 900(1)c4 900(1)c5 900(1)c6 902(1)a 903(2) 1046 (2) A1 1046 (2) A2 1004(2) 1007(1)a 1008(2) 1010(2)b Spl-1 1003(1)a1 1003(1)e2 1018(5) 1018(2) 1053(1)a 1027 (1) 1051(6) Spl-2 1032(1)a 1032 (1) С 1032 (2) 1016(1)b 1013(2)a2 & 1013(2)b1 1014)1)b2 1047(2)a 1047 (2) B 1047(10) 1001(10) & 1002(24) 1002(4) 1001(6) 1001(11) 1100 (10) 1101(33) 1102 (1) 1103(1) 807(2) Construction Of Field Office For The Engineer Permits And Clearances Occupational Safety And Health Program Project Billboard/ Sign Board Clearing And Grubbing Structure Excavation (common Soil) Embankment From Structure Excavation Embankment From Borrow Gravel Fill Garden Soil Structural Concrete (footing And Slab On Fill), Class A, 28 Days Structural Concrete (footing Tie Beam), Class A, 28 Days Structural Concrete (column), Class A, 28 Days Structural Concrete (suspended Slab), Class A, 28 Days Structural Concrete (beams/girders), Class A, 28 Days Reinforcing Steel (deformed), Grade 40 Formworks And Falseworks 100mm Chb Non-load Bearing (including Reinforcing Steel) 150mm Chb Non-load Bearing (including Reinforcing Steel) Finishing Hardwares Aluminum Framed Glass Door (sliding Type) Aluminum Glass Windows Wooden Panel Door Fabricated Stainless Steel Signages 4.5mm Fiber Cement Board Ceiling On Metal Frame Ceiling Prepainted Metal Panel Ceiling On Metal Frame Glazed Tiles Unglazed Tiles Carpet Floor Tiles Cement Plaster Finish Railings Interior Design Painting Works, Masonry, Concrete & Ceiling Painting Works, Steel Varnishing Works Waterproofing Fabricated Metal Roofing Accessory Prepainted Metal Sheets, Long Span, Above 0.427mm, Rib Type Structural Steel, Trusses Structural Steel Purlins Metal Structure Accessories Pipes With Fittings Connection & Cold Water Lines Plumbing Fixtures Catch Basin Septic Vault (concrete/chb) Conduit, Boxes, And Fittings (conduit Works/conduit Rough-in) Wires And Wiring Devices Panelboard With Main & Branch Breakers Lighting Fixtures And Lamps Softscape 1.00 L.s 1.00 L.s 5.70 Mo. 1.00 Ea 399.52 M2 732.83 M3 661.40 M3 459.34 M3 32.04 M3 27.83 M3 130.09 M3 20.77 M3 47.64 M3 55.52 M3 84.84 M3 50,155.35 Kg 1,897.63 M2 827.29 M2 502.85 M2 1.00 L.s 6.30 M2 1.00 L.s 56.88 M2 1.00 L.s 492.82 M2 176.16 M2 388.50 M2 241.13 M2 90.56 M2 2,255.99 M2 1.00 L.s 1.00 L.s 2,748.81 M2 836.07 M2 113.76 M2 26.50 M2 126.63 M 320.52 M2 5,299.86 Kg 1,588.26 Kg 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 1.00 L.s 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Bids And Awards Committee Of The Pgom And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. Of Mondays To Fridays. The Pgom Will Hold A Pre-procurement Conference On January 10, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 20, 2025 To February 03, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty Five Thousand Pesos (php 25,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Pgom Will Hold A Pre-bid Conference On January 20, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before February 03, 2025 At 8:30 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On February 03, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Activity. 10. The Pgom Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Engr. Jollie Ver E. Lasic Head, Bac Secretariat Pgo – Procurement Division Provincial Capitol Complex Camimil, Calapan City, Oriental Mindoro (january 20, 2025) Atty. Earl Ligorio R. Turano Ii Bac Chairperson

Details: Description Invitation To Bid For Construction Of Multi- Purpose Building (auditorium) At Pola, Oriental Mindoro 1. The Provincial Government Of Oriental Mindoro (pgom), Through The Sb No. 2 - 20% Df 2024 Intends To Apply The Sum Of Nineteen Million Nine Hundred Ninety Eight Thousand Seven Hundred Seventy Five Pesos And 30/100 (php 19,998,775.30) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “construction Of Multi- Purpose Building (auditorium) At Pola, Oriental Mindoro (ib No. Cw-2025-008)”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro (pgom) Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 256 Calendar Days. Bidders Should Have A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Description Qty/unit A.1.1(3) B.3 B.5 B.7 (1) Spl-i Spl-ii 104(2)a 803(1)a 804(4) 807(2) 900(1)c1 900(1)c3 900(1)c4 900(1)c6 902(1)a 903(2) 1046(2)a1 1046(2)a2 1004(2) 1007(1)b 1008(1)c 1008(1)d 1010(2)b 1003(1)a1 1003(1)e2 1003(1)g2 1018(1) 1018(2) 1027 (1) 1032(1)a 1032 (1) C 1032 (2) 1013(2)a2 & 1013(2)b1 1014(1)b2 1047(1) & 1047(10) 1047(2)b 1051(6) 1001(10) & 1002(27) 1002(4) 1001(11) 1001(6) 1101(33) 1100 (10) 1103(1) 1102(1) 1102(7) 1102(8) 1102(13) 1208(1) Construction Of Field Office For The Engineer Permits And Clearances Project Billboard/sign Board Occupational Safety And Health Program Fabricated Concrete Signage Cr Wall Partition Embankment From Borrow (common Soil) Structure Excavation (common Soil) Gravel Fill Softscape Structural Concrete (footing And Slab On Fill), Class A, 28 Days Structural Concrete (footing Tie Beam), Class A, 28 Days Structural Concrete (column), Class A, 28 Days Structural Concrete (beams/girders), Class A, 28 Days Reinforcing Steel (deformed), Grade 40 Formworks And Falseworks 100mm Chb Non-load Bearing (including Reinforcing Steel) 150mm Chb Non-load Bearing (including Reinforcing Steel) Finishing Hardwares Aluminum Framed Glass Door (swing Type) Aluminum Glass Windows (awning) Aluminum Glass Windows (fixed) Wooden Doors (wood Panel) 4.5mm Fiber Cement Board Ceiling On Metal Frame Ceiling Prepainted Metal Panel Ceilling On Metal Frame Ceiling Pvc Ceiling On Metal Frame Ceiling Glazed Tiles And Trims Unglazed Tiles Cement Plaster Finish Painting Works, Masonry, Concrete Painting Works, Steel Varnishing Works Fabricated Metal Roofing Accessory Prepainted Metal Sheets, Long Span, Above 0.427mm, Rib Type Structural Steel & Metal Structure Accessories Structural Steel Purlins Railings Pipes With Fittings Connection, Plumbing Works Plumbing Fixtures Septic Vault (concrete/chb) Catch Basin Wires And Wiring Devices Conduit, Boxes, And Fittings (conduit Works/conduit Rough-in) Lighting Fixtures & Lamps Panel Board W/ Main & Branch Breaker Automatic Transfer Switch, Breaker Type Pad Mounted Distribution Transformer (oisc) With Complete Accessories Current Transformer Fire Alarm System 1.00 L.s. 1.00 L.s. 1.00 Ea 8.53 Mo. 1.00 L.s. 1.00 L.s 359.64 M3 425.00 M3 26.50 M3 1.00 L.s 137.56 M3 41.13 M3 50.05 M3 47.63 M3 22,896.00 Kg 1,224.39 M2 476.43 M2 418.60 M2 1.00 L.s. 7.56 M2 7.37 M2 85.21 M2 21.00 M2 521.83 M2 125.76 M2 151.97 M2 580.70 M2 95.95 M2 1,383.94 M2 1,380.06 M2 1,817.88 M2 42.00 M2 189.30 M 768.00 M2 1.00 L.s 3,380.13 Kg 1.00 L.s. 1.00 L.s. 1.00 L.s. 1.00 L.s. 1.00 L.s. 1.00 L.s. 1.00 L.s. 1.00 L.s. 1.00 L.s. 2.00 Set 1.00 L.s. 1.00 L.s. 1.00 L.s. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Bids And Awards Committee Of The Pgom And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. To 5:00 P.m. Of Mondays To Fridays. The Pgom Will Hold A Pre-procurement Conference On January 10, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 20, 2025 To February 03, 2025 From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty Five Thousand Pesos (php 25,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Pgom Will Hold A Pre-bid Conference On January 20, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before February 03, 2025 At 8:30 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On February 03, 2025 At 9:00 A.m. At Bac Conference Room, Provincial Capitol Complex, Camilmil, Calapan City, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Activity. 10. The Pgom Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Engr. Jollie Ver E. Lasic Head, Bac Secretariat Pgo – Procurement Division Provincial Capitol Complex Camimil, Calapan City, Oriental Mindoro (january 20, 2025) Atty. Earl Ligorio R. Turano Ii Bac Chairperson

Description: Contact Information|4|n793.09|2b2|n/a|kyle.r.matsinger.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement|8|x|||||||| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Reports||n/a|n00383|tbd|tbd|tbd|tbd||||||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| warranty Of Supplies Of A Noncomplex Nature (jun 2003)|6|12 Months After Date Of Delivery|45 Days After Discovery Of Defect||||| equal Opportuity For Workers With Disabilities (jun 2020)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| limitations On Pass-through Charges (jun 2020)|1|| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American--balance Of Payments Program (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|12|332919|750||||||||||| facsimile Proposals (oct 1997)|1|| notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2||x| this Is A Competitive Spares Requirement For The Items Listed In This Solicitation. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, delivery Orders And Modifications) Related To The Instant Procurement are Considered To Be "issued" By The Government When Copies Are either Deposited In The Mail, Transmitted By Facsimile, Or Sent By Other electronic Commerce Methods, Such As Email. The Government's acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement to "issue" Contractual Documents As Detailed Herein. \ 1. Scope 1.1 . Markings Shall Be In Accordance With Mil-std-130. 1.2 Pre-award / Post Award Requirements: due To The Critical Use Of This Item And Its Quality History, A Pre-award Survey And Post-award Conference May Be Required For All New Manufacturers. For All Previous Sources, A Post-award Conference May Be Recommended. 1.3 The Components Being Acquired Under This Solicitation Have Been Classified As Flight Critical Requiring Engineering Source Approval By The Naval Air Systems Command. Only Those Companies Who Have Submitted Requests For Source Approval And Been Approved will Be Eligible For Award Under This Solicitation. Any Company Not Previously Approved May Submit A Source Approval Request To The Contracting Officer, Naval Inventory Control Point, (see Block 10 Of The sf33 For Name And Code). The Source Approval Request Shall Contain The Following Documentation And Shall Be Submitted By The Closing Date Of This Solicitation: (a) Copy Of Complete Configuration Drawings For A Similar Item(s) Which Your Company Has Produced Within The Past Three Years, Including Test Procedures For Which Your Company (1) Has Been Qualified To Manufacture And (2) Which Is Similar, I.e., Requires The same Materials, Manufacturing Processes, Inspections, Tolerances And Similar Application As The Item(s) For Which You Are Seeking Approval. (b) Copy Of The Complete Process/operation Sheets Used To Manufacuture The Similar Item, Including But Not Limited To, Detailed Shop Sketches. These Plans Must Note Those Operations And Processes Performed By Subcontractors/ Vendors. (c) Complete Copies Of Purchase Orders, Shipping Documents, Etc. That Document Delivery Of Production Quantities Of The Part To The Original Equipment Manufacturer Or Military Service. Provide The Most Recent Copies Of The Documents. (d) A Detailed Comparative Analysis Of The Differences/similarities Between The Similar Part And The Part(s) For Which You Are Seeking Approval. This Analysis Should Include Materials, Configuration, Tolerances, Process Requirements, Dimensions, Castings, forgings, Etc. (e) Copy Of Inspection Method Sheets Used In The Manufacturing And At Final Inspection. These Sheets Should Include Actual Tolerance, Print Requirements, Inspection Devices, Sources Performing The Operation And Level Of Inspection. Critical Characteristics should Be Discernible From All Other Characteristics. the Above Requirements Are A Subset Of Requirements Specified In The Aso source Approval Information Brochure Dated January 1995. The Submission Of This Data Subset Is Contingent Upon And In Consideration Of The Submitting Contractor Meeting All Other Requirements Specified In This Solicitation To Include A Bilateral Agreement With mda Which Includes Availability Of Complete Data, Mrb Disposition, Etc. Any Company Not Having Such Agreement, But Desiring To Seek Engineering Source Approval, Will Be Required To Submit Data Meeting All Requirements Of The Aso/navicp Source Approval brochure. 1.4 Sampling Rates (aqls) Indicated Below Shall Be Used In Accordance With ansi Z1.4 For Single Sampling And A General Inspection Level Of Ii. 1.5 In Addition To The 100% Pco Mandatory, Critical And Major Characteristics, attributes For Plating, Hardness And Non-destructive Testing Will Be Inspected one Hundred Percent. 1.6 Contractor Shall Develop A System For Identification Of Individual piece Parts For Traceability Purposes. Markings Shall Not Be Permanent. 1.7 An Aql Of 1.5 Will Be Used For Class 3 Threads And Dimensions, And geometric Feature Controls With A Tolerance Range Of .010 Or Less. 1.8 For Minor Characteristics, A Sampling Rate Determined By The Contractor and Subject To Qar Approval Will Be Used. 1.9 The Material Covered In This Contract/purchase Order Will Be Used In A crucial Shipboard System Enabling The Launch And/or Recovery Of Aircraft. The Use Of Incorrect Or Defective Material Would Create A High Probability Of Failure Resulting In A Serious Personnel Injury, Loss Of Life, Loss Of Vital shipboard Systems Or Loss Of Aircraft. Therefore,the Material Has Been designated As Critical Material And Special Control Procedures Are Invoked to Ensure Receipt Of Correct Material. 1.10 Articles To Be Furnished Hereunder Shall Be Manufactured, Tested And Inspected In Accordance With ;nawc Lakehurst; Drawing Number ( ;6544d025-3; ) ;80020; , Revision ;g; And All Details And Specifications Referenced Therein. 1.11 Unless Expressly Provided For Elsewhere In This Clause, Equipment Such As Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Test Equipment, Or Any Other Manufacturing Aid Required For The Manufacture And/or Testing Of The Subject Item(s) Will Not be Provided By The Government Or Any Other Source And Is The Sole Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing Or Referenced specification. 1.12 If Mil-std-454 Is Referenced In The Drawings Or In The Specification, The Contractor Is Expected To Show Compliance With Ipc/eiaj-std-001c. 2. Applicable Documents drawing Data=6530c124 |80020| H| |d| | | | drawing Data=6544d025 |80020| G| |d| | | | 3. Requirements - Not Applicable 4. Quality Assurance indal Technologies Is A Canadian Company Whose Welding Certification Is In Accordance With The Canadian Welding Bureau (cwb) Vice Navsea Welding Certification Standards. Per Rei 23-22058 The Cwb Welding Certification Is Acceptable. quality Assurance Requirements 1. The Contractor Shall Perform Quality Conformance And Lot Sampling Inspection For All Associated Features That Are Present In The Drawings And Specifications: a. Features/attributes/requirements Classified As Critical And Major On The Drawing(s) Or Within The Technical Specification Shall Be Inspected And Shall Have The Actual Dimensions Documented 100%; b. Attributes For Plating, Hardness, And Non-destructive Testing Shall Be Inspected 100%; c. Class 3 Threads, Dimensions, And Geometric Feature Controls With A Tolerance Range Of .010 Or Less Shall Be Inspected Using An Aql Of 1.5 And The General Inspection Level Ii As Defined By Ansi Z1.4 d. Minor Characteristics: Sampling Shall Be Inspected Using An Aql Of 4.0 And The General Inspection Level Ii As Defined By Ansi Z1.4. 2. First Article Testing: the Contractor Shall Conduct First Article Testing On This Item Of Alre/se And Must Address All Elements Listed Below And Prepare A First Article Test Report Documenting The Outcome. Unless Otherwise Specified, The Report And Its Acceptance Shall Be Per The provisions Of The Applicable Contract Data Requirements List (cdrl). a. Requirements: i. First Article Quantity Is One (1); In Uncoated Condition. ii. The First Article Shall Be Available For Government Evaluation Per The Contract Schedule. The Evaluation Shall Be Conducted In The Presence Of The Government Personnel. iii. The Contractor Shall Provide Facilities And Personnel Sufficient To Conduct All Necessary Tests To Establish Conformance; iv. The Contractor Shall Have Available For Review All Certifications, Test Reports, In-process Inspection Documents Needed To Substantiate Product Quality; This Same Documentation Shall Also Be Included In The First Article Test Report; v. The Contractor Shall, At The Time Of First Article, Have Corrected Any Problem Areas Deemed Significant And Documented As Deficient By The Government Within His/her Quality Assurance System Not Previously Identified During Prior Evaluations And/or Surveys; any Problems Identified During The Conduct Of The Test Will Also Require Correction. b. Testing And Evaluation: i. The Contractor Shall Accomplish 100% Inspection And/or Testing Of All Critical, Major, And Minor Dimensions And/or Requirements Identified In The Drawings, Drawing Notes, And Process And Fabrication Specifications. Results Shall Consist Of Actual Dimensions, measurements, And Test Outcomes And Shall Be Recorded Andincluded In The First Article Test Report. c. Acceptance/reject Criteria: i. Satisfactorily Meeting All Requirements Cited In The First Article Testing "requirements" Paragraph Above And Satisfactorily Demonstrating 100% Conformance To The Test And Evaluation Elements Cited In The First Article Testing "testing And Evaluation" paragraph Above Shall Constitute Acceptance Of The First Article; ii. Failure To Meet Any Of The Conditions In The First Article Testing "requirements" Paragraph Above Or The First Article Testing "testing And Evaluation" Paragraph Above Shall Be Cause For Rejection. d. Delivery: i. The Accepted First Article Exhibit May Be Delivered And Counted Along With The Contract Production Quantities Providing The Item Has Not Been Damaged During Testing, And Has Been Found To Be Conforming; ii. The Contractor Is Responsible For Preparing The First Article Test Report In Accordance With Cdrl's. 3. Production Lot Special Tests: N/a 4. For Purposes Of This Tdr, The Term Ndt Shall Refer To The Following Methods: Mt - Magnetic Particle Testing, Pt - Penetrant Inspection, Ut - Ultrasonic Testing, Rt - Radiographic Testing, And Vt - Visual Testing. 5. Companies Performing Ndt Shall Be Nadcap Accredited, Or A Laboratory Accredited By One Of The Organizations Listed Below As Satisfying Iso 17025 (general Requirements For The Competence Of Testing And Calibration Laboratories). Ndt Certificates Shall Be Bear the Symbols Of Accreditation And The Accreditation Body. a. American Association For Laboratory Accreditation (a2la) b. Ansi National Accreditation Board (anab) c. International Accreditation Service, Inc (ias) d. National Voluntary Laboratory Accreditation Program (nvlap) e. Perry Johnson Laboratory Accreditation, Inc (pjla) f. Canadian Association For Laboratory Accreditation Inc. (cala) g. Standards Council Of Canada (scc) 4.1 Review Documentation As Provided Under Dd 1423 Requirements. 4.2 The Test To Be Performed Under The First Article Approval Clause (far 52.209-3) Of The Contract Are Listed Below 4.2.1 Dimensional Test (special) ;applies; 4.2.2 Requirements Of: ;lke Drawing Package; 4.2.3 Form ;applies; 4.2.4 Fit ;n/a; 4.2.5 Function ;n/a; 4.2.6 Compliance With Drawing ( ;80020; ) ;6544d025; , Revision ;g; And Specifications Referenced Therein. 4.3 In Addition To The Above Tests, The First Article(s) To Be Inspected Hereunder Shall Also Be Subjected To Those Tests Which Will Demonstrate That The Article(s) Comply With The Contract Requirements 4.4 The Contractor Shall Be Responsible For Providing The Necessary Parts And Repair Of The First Article Sample(s) During Inspection 4.5 The Contractor Shall Notify The Pco, Aco, And Qar Fourteen (14) Days Prior To Conducting The First Article Test So That The Government May Witness Such Testing. 4.5.1 The Qar Shall Be Present To Witness All First Article Testing. 4.5.2 The Following Additional Personnel Shall Witness The First Article Testing: ;roy Janney Nawcadlke Qa / Tel: (732)-323-2834 e-mail: Roy.a.janney.civ@us.navy.mil; 4.6 Disposition Of Fat Samples 4.6.1 ;n/a; Sample(s) May Be Destroyed During Testing. 4.6.2 ;applies; Unless Otherwise Provided For In The Contract, Sample(s) Shall Remain At The Contractor And May Be Considered As Production Items Under The Contract Provided The Sample(s) Can Be Refurbished To Ready For Issue Condition And Provided The sample(s) Have Inspection Approval Of The Cognizant Dcmc Qar. Sample(s) May Be Shipped As Production Items Only After All Other Units Required Under The Contract Have Been Produced And Are Ready For Shipment. 4.7 Test Sample Coating Instructions 4.7.1 Samples Are To Be Unpainted. Corrosive Areas Are To Be Coated With A Light Preservative If Required. 4.8 Notice To Government Of Testing At The Contractors Facility. 4.8.1 Far 52.209-3 Applies (a) The Contractor Shall Present ;one; ; Unit(s) Of The Following Cage( ;80020; ; ), Part Number ;6544d025-3; ; , Revision ;g; ; As Specified In This Contract. At Least Fourteen (14) Calendar Days Before The Beginning Of The First Article Testing, The contractor Shall Notify The Contracting Officer, In Writing, Of The Time And Location Of The Testing So That The Government May Witness The Tests. (b) The Contractor Shall Submit The First Article Test Report Within 15 Calendar Days From The Date Of Testing To: ;pco; ; the Contractor Shall Mark The Report "first Article Test Report" And Cite The Contract Number And Lot/item Number. Review Documentation As Provided Under The Dd1423 Requirements. (c) Within 45 Calendar Days After The Government Inspects The First Article, The Contracting Officer Shall Notify The Contractor, In Writing, Of The Approval, Conditional Approval, Or Disapproval Of The First Article. The Notice Of Approval, Conditional approval, Or Disapproval Shall Not Relieve The Contractor From Complying With All Requirements Of The Specifications And All Other Terms And Conditions Of This Contract. A Notice Of Conditional Approval Shall State Any Further Action Required Of The contractor. A Notice Of Disapproval Shall Cite Reasons For Disapproval. (d) If The First Article Is Disapproved, The Contractor, Upon Government Request Shall Repeat Any Or All First Article Tests. After Each Request For Additional Tests, The Contractor Shall Make Any Necessary Changes, Modifications, Or Repairs To The First article Or Select Another First Article For Testing. All Costs Related To These Tests Are To Be Borne By The Contractor, Including Any And All Costs For Additional Tests Following A Disapproval. The Contractor Shall Then Conduct The Tests And Deliver Another report To The Government Under The Terms And Conditions And Within The Time Specified In Paragraph B Above. The Government Reserves The Right To Require An Equitable Adjustment Of The Contract Price For Any Extension Of The Delivery Schedule Or For Any additional Costs To The Government Related To These Tests. (e) If The Contractor Fails To Present Any First Article On Time, Or The Contracting Officer Disapproves Any First Article, The Contractor Shall Be Deemed To Have Failed To Make Delivery Within The Meaning Of The Default Clause Of This Contract. (f) Unless Otherwise Provided In The Contract, And If The Approved First Article Is Not Consumed Or Destroyed In Testing, The Contractor May Deliver The Approved First Article As Part Of The Contract Quantity If It Meets All Contract Requirements For acceptance. (g) If The Government Does Not Act Within The Time Specified In Paragraph (c) Above The Contracting Officer, Shall, Upon Timely Written Request From The Contractor, Equitably Adjust Under The Changes Clause Of This Contract The Delivery Or Performance Dates and/or The Contract Price, And Any Other Contractual Term Affected By The Delay. (h) Before First Article Approval, The Acquisition Of Materials Or Components For, Or The Commencement Of Production Or, The Balance Of The Contract Quantity Is At The Sole Risk Of The Contractor. Before First Article Approval, The Costs Thereof Shall Not Be allocated To This Contract For 1) Progress Payments, Or 2) Termination Settlements If The Contract Is Terminated For The Convenience Of The Government. The Contractor Is Responsible For Providing Operating And Maintenance Instructions, Spare Parts, And Repair of The First Article During Any First Article Test. (i) The Contractor Shall Produce Both The First Article And The Production Quantity At The Same Facility And Shall Submit A Certification To The Effect With Each First Article. (j) The Test Report (2 Copies) Shall Be In Accordance With Mil-std-831, Unless Otherwise Specified On The Dd1423, And Shall Be Submitted Via The Cognizant Dcmc To Navsup, Attn: (cite Name And Code In Block 10.a Of The Sf33). The Dcmc Shall Provide Comments On form Dd1222 (2 Copies) Which Shall Be Forwarded With The Test Report. Approval Of The Test Report Is The Pco's Responsibility. Upon Notification Of Approval, Condition Approval, The Aco Shall Execute The Dd250 To Indicate Government Acceptance Of The Test report. 4.9 Alternate Offers - Waiver Of First Article Approval Requirements. (the Following Provisions Supersede Any Waiver Of First Article Approval Requirements Terms Set Forth In Clause 52.209-3 Or 52.209-4 As Appropriate) (a) Unless Otherwise Specified In The Solicitation, Navsup Wss Reserves The Right To Waive The First Article Approval Requirements Specified Herein For Offerors Who Have Previously Furnished Identical Production Articles Accepted By The Government Or The original Equipment Manufacturer/prime Manufacturer. An Offeror Requesting Waiver Of First Article Requirements Shall Submit Evidence With Its Offer Establishing That: (i) The Last Production Unit Was Delivered Within Three (3) Years Of The Issue Date Of This Solicitation, And (ii) The Production Location To Be Used For This Requirement Is The Same As Used For The Previous Production Run. additionally, The Offeror Shall Submit A Certification, To Be Executed By The Officer Or Employee For The Offer, Stating That: (i) The Articles To Be Provided Will Be Produced Using The Same Facilities, Processes, Sequences Of Operations And Approved Subcontractors As Those Previously Delivered And Accepted By The Government Or The Original Equipment Manufacturer/prime Manufacturer, and (ii) The Previous Production Units Were Manufactured Without Material Review Board Disposition Or Waiver/deviation Request Or Rejection Of Pre-production Samples For Cause. (note: This Certification Concerns A Matter Within The Jurisdiction Of An Agency Of The United States And The Making Of A False, Fictitious, Or Fraudulent Certification May Render The Maker Subject To Prosecution Under Title 18, United States code, Section 1001.) (b) Offerors Requesting Waiver Of First Article Approval Requirements Under The Provisions Of This Clause Are Cautioned To Submit Two Prices For Articles Required Herein - One That Is Based On Compliance With The First Article Approval Requirements And one That Is Based On A Waiver Of Such Requirements. Where An Offeror Submits Only One Price And Fails To Clearly State That The Price Is Based On Waiver Of The First Article Approval Requirements It Will Be Deemed To Be Based On Compliance With The First article Approval Requirements (c) In The Event Of The First Article Approval Requirement Is Granted, The Delivery Schedule For The Production Items Shall Be Reduced By The Number Of Days Designated For Delivery Of First Article Test Unit Plus The Number Of Calendar Days Indicated For The government Notification Of Conditional Approval Or Approval. These Requirements Are Specified In The Quality Assurance Section Of This Solicitation. If The Offeror Is Unable To Meet The Desired Schedule, He Shall Insert Below The Alternate Delivery Schedule he Offers To The Government. Offeror's Proposed Alternate Delivery Schedule (based On Waiver Of First Article Approval Requirements) within Days: item No. _____________ Quantity:_______ After Date Of Contract:_________ 4.10 . Mandatory Inspection Requirements: 100% Procurement Contracting Officer (pco) Mandatory Inspection Is Required And Shall Be Accomplished At Source Under The Surveillance And Final Approval Of The Cognizant Dcmao Quality Assurance Representative (qar). during Production, Mandatory Inspection Is Required To Be Accomplished By The Contractor As Follows: A. Level Of Inspection (loi). 1. Critical Characteristics: 100% Inspection Shall Apply. 2. Major And Minor Characteristics: Loi Shall Be In Accordance With A Sampling Plan Acceptable To The Qar. B. Critical Characteristics: ;roy Janney Nawcadlke Qa / Tel: (732)-323-2834 e-mail: Roy.a.janney.civ@us.navy.mil; C. Major And Minor Characteristics 1. Shall Be Defined By The Contractor Subject To Qar Concurrence, Unless Defined On Applicable Drawings And Associated Specifications. 4.11 Special Inspection Requirements ( ;n/a; ) Magnetic Particle Inspection ( ;n/a; ) Surface Inspection ( ;n/a; ) Penetrant Inspection ( ;n/a; ) Radiographic Inspection ( ;n/a; ) Ultrsonic Inspection ( ;applies; ) High Shock Test ( ;applies; ) Mechanical Vibration Test 4.12 Final Inspection Requirement:due To The Critical Nature Of This Item, Representatives Of The Buying office/and The Cognizant Field Activity, Nawc Lakehurst, Shall Be Notified By The Successful Contractor At Least 14 Days Prior To Presentation To The Dcm Qar Of The Items For Final Inspection So That They May Have The Option Of witnessing The Final Inspection. The Contractor Shall Notify By Email Or telefax Pco And Nawc Lakehurst Qa ;roy Janney Nawcadlke Qa / Tel: (732)-323-2834 e-mail: Roy.a.janney.civ@us.navy.mil; To Arrange For The Final Inspection.the Authority Of The Qar Shall Not Be Abrogated. If The Notification Is Not Given To Both Sites Then The Qar Shall Not Accept The Units. 5. Packaging- Mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes - Not Applicable this Is An Alre Critical Application Item. For Drawing Updates, See Attached Nawc Lke Drawing Update Sheet. navsup Reference Only: Procurement Tdr (24-10083) The Components Being Acquired Under This Solicitation Have Been Classified As "critical" Requiring Engineering Source Approval By Naval Air Systems Command. Only Those Companies Who Have Submitted And Been Approved Will Be Eligible For Award Under This solicitation. Any Company May Submit A Source Approval Request As Outlined In This Solicitation. \ date Of First Submission=asreq 16 Remarks (block 12) Concurrently With Delivery Of Fat Items. inspection/certification Data Needed To Substantiate The Quality Ofthe First Article Test Unit Shall Be Included In First Article Unit Packaging. The Outside Of The Package That Contains The Data Shall Be Clearly Marked "inspection/certification Data Included". data Requirements: a. Copies Of All Approved Requests For Variations. b. Identification Per Drawing 6544d025. c. Hydraulic Requirements Per Drawing 6544d025. d. Electrical Requirements Per Drawing 6544d025. e. Shock And Vibration Requirements Per Drawing 6544d025. f. Dimensional Inspection Per Drawing 6544d025. g. Acceptance Test Per Drawing 6544d025. date Of First Submission=asreq 16. Remarms: (block 12) Concurrently With Final Inspection. data Requirements: a. Copies Of All Approved Requests For Variations. b. Identification Per Drawing 6544d025. c. Hydraulic Requirements Per Drawing 6544d025. d. Electrical Requirements Per Drawing 6544d025. e. Coating Per Drawing 6544d025. f. Shock And Vibration Requirements Per Drawing 6544d025. g. Dimensional Inspection Per Drawing 6544d025. h. Acceptance Test Per Drawing 6544d025.

Details: Description Construction Of Super Health Center (phase Ii) Item Description Unit Qty. Unit Price Amount Part I General Requirements B.5 Project Billboard/sign Board Ea 1.00 B.7(2) Occupational Safety And Health Program Ls 1.00 Part Ii Completion Of Building A Finishing, Tiles, Ceiling & Steel Works 1003(1)e2 Minirib Ceiling Panel On Metal Frame Ceiling M2 109.16 1003(1)h Ceiling Air Ventilation Unit 31.00 1018(2)b Ceramic Tiles M2 268.41 1018(2)c Non-skid Outdoor Ceramic Floor Tiles M2 23.96 B Fabricated Materials 1004(2) Finishing Hardware Set 7.00 1010(2)b Wooden Panel Door M2 11.76 1008(1)d Aluminum Glass Window (fixed Type) M2 9.63 1051(6) Railings / Handrails Ls 1.00 C Painting Works 1032(1)a Painting Works (ceiling/masonry Painting) M2 897.59 1032(1)b Painting Works (wood Painting) M2 50.31 1032(1)d Wood Staining Works M2 9.69 D Architectural Features 1027(3) Decorative Stone M² 16.46 Spl 1 Wood Works Ls 1.00 Spl 2 Signages Ls 1.00 E Miscellaneous Works 1208(1) Fire Alarm System L.s. 1.00 1202(6)a Fire Extinguisher Ls 1.00 Spl 3 Other Miscellaneous Ls 1.00 Invitation To Bid The City Government Of Pagadian, Through Its Bids And Awards Committee (bac), Invites Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) To Apply For Eligibility And If Found Eligible, To Bid For The Hereunder Contract: Contract Reference No. Infra-2025-01-04 Name Of Contract: Construction Of Super Health Center (phase Ii) Tiguma Zone 8, Pagadian City 2saip24-8000df-2a12 Approved Budget For The Contract -p 1,930,000.00 Completion Of Work -120 Calendar Days Prospective Bidders Should Possess A Valid Pcab License Applicable To The Contract, Have Completed A Similar Contract With A Value Of At Least 50% Of The Abc, And Have Key Personnel And Equipment (listed In The Eligibility Forms) Available For The Prosecution Of The Contract. The Bac Will Use Non-discretionary Pass/fail Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To The Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a.9184 And Its Implementing Rules And Regulations (irr). Below Is The Schedule Of Procurement Activities: Activity Date 1-advertisement/posting Of Invitation To Bid January 13, 2025 To January 20, 2025 2-issuance And Availability Of Bidding Documents January 13, 2024 To January 28, 2025 3-pre-bid Conference January 16,2025 4- Submission And Receipt Of Bids /bid Opening January 28, 2025 The Bac Will Issue To Prospective Qualified Bidders, Bidding Documents At The Bac Secretariat, Office Of The City Planning And Development Coordinator, Pagadian City, Upon Payment Of A Non-refundable Amount Of (p 2,000.00) To The Office Of The City Treasurer-cashier. Prospective Bidders Shall Submit Their Duly Filled-up Bidding Documents On The Scheduled Date For The Submission And Receipt Of Bids /bid Opening To The Bac, Pagadian City. The City Government Of Pagadian Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Ms. Jenny Rose Z. Egama City General Services Officer Bac Chairman Date Posted: January 13, 2025 To January 20, 2025

Details: Description Republic Of The Philippines Province Of Misamis Oriental Municipality Of Balingoan -o0o- Municipal Bids And Awards Committee Invitation To Bid For Construction Of Covered Court At Balingoan College - Phase 1 Mantangale, Balingoan, Misamis Oriental Itb No. Bal-apsu2025-009 1.the Local Government Unit Of Balingoan, Through The 20% Lgdf - Cy 2025 Intends To Apply The Sum Of Six Million Seven Hundred Twenty Thousand Eight Hundred Seventy Nine Pesos And 57/100 (php 6,720,879.57) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Construction Of Covered Court At Balingoan College - Phase 1. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2.the Local Government Unit Of Balingoan Now Invites Bids For Construction Of Covered Court At Balingoan College - Phase 1 (occupational Safety And Health Program, Removal Of Actual Structures/obstruction, Structural Steel Furnished, Fabricated, And Erected, Structure Excavation (common Soil), Gravel Fill, Backfilling Works, Structure Concrete (slab,footings & Slab On Fill), Class A 28 Days, Structural Concrete (columns, Class A, 28 Days), Reinforcing Steel (deformed, Grade 40), Reinforcing Steel (deformed, Grade 60), Forms & Falseworks, Pre Painted Metal Sheets (longspan), Structural Steel (trusses), Structural Steel (purlins), Metal Structural Accessories (bolts), Metal Structural Accessories (sagrods), Metal Structural Accessories (turnbukles), Metal Structural Accessories (cross Bracing), Metal Structural Accessories (steel Plates), Painting Works (masonry Painting), Painting Works (metal Painting), Masonry Works). Completion Of The Works Is Required 240 Days. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Instructions To Bidders. 3.bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. (i)bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4.interested Bidders May Obtain Further Information From Bids And Awards Committee (bac) And Inspect The Bidding Documents At The Address Given Below During Regular Office Hours From 8:00 A.m. To 5:00 P.m. Mondays To Fridays Starting January 28, 2025. 5.a Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 10,000.00. 6.bids Must Be Delivered To The Address Below On Or Before February 17, 2025 At Bac Office, Municipal Building, Balingoan, Misamis Oriental. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. Activity Date & Time Venue Receipt Of Letter Of Intent (loi) & Issuance Of Bid Documents Jan. 28 - Feb. 14, 2025 8:00 Am – 5:00 Pm Bac Office, Municipal Bldg., Balingoan, Mis. Or. Pre-bid Conference Feb. 4, 2025 @ 10:00 Am. -do- Deadline For Submission Of Bid Documents February 17, 2025 @ 9:30 Am. -do- Opening Of Bids February 17, 2025 @ 10:00 Am. -do- 7.the Bids And Awards Committee Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 8.for Further Information, Please Refer To: Bac Secretariat Bids And Awards Committee Office Municipal Building, Balingoan, Mis. Or. Cell No. 09915779149 Glaver25@yahoo.com Sgd.reynon C. Ortiz, Enp,lpt Mpdo/bac Chairman Mun. Planning & Devt’ Office Lgu-balingoan, Mis. Or. 9011

Details: Description Construction/improvement Of Water Park (phase Ix) Item Description Unit Qty. Unit Price Amount Part I General Requirements B.5 Project Billboard/sign Board Ea 1.00 B.7 (2) Occupational Safety And Health Program Ls 1.00 Part Ii Civil Works Part A Concrete Works 900(1)c2 Structural Concrete For Slab On Fill (class A, 28 Days) M³ 7.37 902(1)a Reinforcing Steel Of Concrete Structures Kg 162.80 Part B Roofing Works 1039(1) Aluminum Cladding, 4mm Thk M² 39.00 1047(2)a Structural Steel Roof Framing Kg 63.04 1047(2)b Structural Steel Roof Truss Kg 59.36 Part C Fabricated Materials 1012(3)a Tempered Glass Door (12mm) M2 4.20 1012(4)a Tempered Glass Windows (12mm) M2 87.51 1039(1) Aluminum Cladding, 4mm Thk ( Column) M² 4.71 1051(6) Railings / Handrails Ls 1.00 1722(2) Stainless Steel Railings With 12mm (1/2mm") Clear Glass Ls 1.00 Part D Tile Works 1018(2) Unglazed Tiles M2 230.10 Spl- 1 Stairnosing (rubber) Ls 1.00 Part E Landscaping 741(1) Concrete Paving Blocks (hardscape) M² 293.60 Part Iii Electrical Works 1100(10) Conduits, Boxes, And Fittings L.s. 1.00 1101(33) Wires And Wiring Devices L.s. 1.00 1102(21) Power Load Center, Switchgear, And Panel Boards L.s. 1.00 1103(1) Lighting Fixtures L.s. 1.00 Total Invitation To Bid The City Government Of Pagadian, Through Its Bids And Awards Committee (bac), Invites Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) To Apply For Eligibility And If Found Eligible, To Bid For The Hereunder Contract: Contract Reference No. Infra-2025-01-09 Name Of Contract: Construction/improvement Of Water Park (phase Ix), Brgy. San Pedro 2saip24-8000rf-2a4 Approved Budget For The Contract -p 4,890,139.71 Completion Of Work -120 Calendar Days Prospective Bidders Should Possess A Valid Pcab License Applicable To The Contract, Have Completed A Similar Contract With A Value Of At Least 50% Of The Abc, And Have Key Personnel And Equipment (listed In The Eligibility Forms) Available For The Prosecution Of The Contract. The Bac Will Use Non-discretionary Pass/fail Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To The Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a.9184 And Its Implementing Rules And Regulations (irr). Below Is The Schedule Of Procurement Activities: Activity Date 1-advertisement/posting Of Invitation To Bid February 3,2025 To February 10, 2025 2-issuance And Availability Of Bidding Documents February 3, 2025 To February 17, 2025 3-pre-bid Conference February 5, 2025 4- Submission And Receipt Of Bids /bid Opening February 17, 2025 The Bac Will Issue To Prospective Qualified Bidders, Bidding Documents At The Bac Secretariat, Office Of The City Planning And Development Coordinator, Pagadian City, Upon Payment Of A Non-refundable Amount Of (p 5,000.00) To The Office Of The City Treasurer-cashier. Prospective Bidders Shall Submit Their Duly Filled-up Bidding Documents On The Scheduled Date For The Submission And Receipt Of Bids /bid Opening To The Bac, Pagadian City. The City Government Of Pagadian Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Ms. Jenny Rose Z. Egama City General Services Officer Bac Chairman Date Posted: February 3, 2025 To February 10, 2025

Details: Description 1. 256 Bd.ft 64 Pcs.2 X 2 X 12 Good Lumber 2. 16 Shts ¼” Thk. X 4’ X 8’ Hardiflex Board 3. 3 Units 1 X 2.10 Fabricated Solid Panel Door 4. 1 Unit 0.70 X 2.10 Pvc Door 5. 200 Bd.ft 30pcs. 2 X 4 X 10 Coco Lumber 6. 1 Kg. #4” Concrete Nails 7. 10 Kgs. #4” Common Wire Nails 8. 10 Kgs. #3” Common Wire Nails 9. 12 Kgs. #21/2” Common Wire Nails 10. 9 Pcs. 15 Watts Led Recessed Circular Down Light6500k Daylight 11. 3 Pcs. 15 Watts Led Surface Mounted Circular Down Light 6500k Daylight 12. 1 Pc. 18 Watts Led Recessed Square Downlight, 6500k Daylight 13. 1 Pc. 18 Watts Led Surface Mounted Square Downlight, 6500k Daylight 14. 3 Pcs. Single Gang Switch 250 Vac 15 Amp. W/ Modern Plate Cover 15. 1 Pc. Two Gang Switch 250 Vac 15 Ampw/ Modern Plate Cover 16. 7 Pcs. Three Gang Convenience Outlet 17. 1 Pc. Three Gang Gfci Outlet 18. 1 Pc. Nema 3r, 30amp. 19. 1 Pc. Safety Breaker 20 Amp. 20. 3 Lgths 1” Ǿ Conduit Pipe 21. 3 Pcs. 1 Ǿ Pvc Elbow 22. 0.5 Roll ½ Ǿ Flexible Hose 23. 12 Pcs. Utility Box 24. 7 Pcs. 4 X4 Plastic Junction Box 25. 60 Pcs. ½ Ǿ Hose Connector 26. 50 Pcs. ½ Pyc Clip 27. 2 Rolls Electrical Tape 28. 1 Roll #14 Thhn Stranded Wire 29. 1 Roll #12 Thhn Stranded Wire 30. 50 Mtrs #10 Thhn Stranded Wire 31. 1 Unit 6 Branches Panel Board 32. 1 Unit 15 Amp. 33. 3 Units 20 Amp. 34. 1 Unit 30 Amp 35. 2 Units 40 Amp 36. 1 Unit 80 Amp. 37. 7 Gals Latex Flat Paint White B/s 38. 6 Gals Gloss Latex Paint White B/s 39. 6 Cans Latex Tinting Color 40. 6 Gals Masonry Putty 41. 1 Bag Patching Compound 42. 6 Pcs. Putty Knife 43. 2 Doz # 180 Sand Paper 44. 2 Doz # 220 Sand Paper 45. 3 Ft # 50 Sand Paper 46. 4 Rolls #4” Roller Paint W/ Basin 47. 4 Pcs. #4” Paint Brush 48. 2 Pcs. #2” Paint Brush 49. 1 Unit 3’ X 4’ Tarpaulin Printing Glass Works: 50. 1 Unit 6mm Thk. 2.7 X 2.8m. Fixed Clear Glass On Analok Alum. Frame 51.1 Unit 6mm Thk. 0.90 X 2.1m. Clear Glass On Analok Alum. Frame W/ Door Closer 52. 1 Unit 0.75 X 0.75m. 6mm Thk. Clear Glass Sliding Window On Analok Alum. Frame 53. 1 Unit 0.80 X 0.80m. 6mm Thk. Clear Glass Sliding Window On Analok Alum. Frame 54. 2 Units 1.20 X 0.75m. 6mm Thk. Clear Glass Awning Window On Analok Alum. Frame 55. 2 Units 2.25 X 1.50m. 6mm Thk. Clear Glass Awning Window On Analok Alum. Frame

Details: Description Invitation To Bid January 27, 2025 1. The Dpwh- Quirino District Engineering Office, Through The Gaa Fy 2025 Intends To Apply The Sum Of ₱4,950,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Project Stated Below. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh- Quirino District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 1 Name Of Project/location : Basic Infrastructure Program (bip) - Multi-purpose Building/ Facilities To Support Social Services - Construction Of Multi-purpose Building (day Care Center), Barangay Rizal, Saguday, Quirino Contract I.d. : 25bk0064 Brief Project Description 1 Storey Multi-purpose Building Scope Of Works : Construction Of Multi-purpose Building Other General Requirements • Permits And Clearances • Project Billboard/signboard • Occupational Safety And Health • Mobilization / Demobilization Earthworks • Structure Excavation, Common Soil • Embankment From Roadway/structure Excavation, Common Soil • Embankment From Borrow, Common Soil • Gravel Fill Reinforced Concrete • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed), Grade 40 • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Catch Basin • Sewer Line Works • Storm Drainage And Downspout • Septic Vault, Concrete/chb • Plumbing Fixtures • Cold Water Lines • Ceiling 4.5 Mm, Metal Frame, Fiber Cement Board • Flush Door • Doors, Wood Panel • Glass And Glazing • Fabricated Metal Roofing Accessory, Gauge 26 (0.551 Mm), Flashings • Fabricated Metal Roofing Accessory, Gauge 24 (0.701 Mm), Gutters • Prepainted Metal Sheets, Above 0.427 Mm, Rib Type, Long Span • Floor Finishes • Cement Plaster Finish • Painting Works, Masonry/concrete • Painting Works, Steel • Reflective Insulation • Perforated Ceiling Panel • Chb Non Load Bearing (including Reinforcing Steel), 100mm • Chb Non Load Bearing (including Reinforcing Steel), 150mm • Metal Structure Accessories, Turnbuckle • Metal Structure Accessories, Bolts And Rods • Metal Structure Accessories, Sagrods • Metal Structure Accessories, Cross Bracing • Metal Structure Accessories, Steel Plates • Structural Steel, Trusses • Structural Steel, Purlins • Railing Electrical • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Lighting Fixtures And Lamps Mechanical • Airconditioning, Package/split Type Approved Budget For The Contract (abc) : ₱4,950,000.00 Project Duration : 111 Calendar Days Cost Of Bidding Documents : ₱5,000.00 Pcab License Category C&d (size Range : Small B) 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category (see Table Above). The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15-2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh- Quirino District Engineering Office And Inspect The Bidding Documents At Procurement Unit Office, Dpwh Quirino District Engineering Office During Weekdays From January 29, 2025 - February 19, 2025. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 29, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Stated Above. Pursuant To Section 17.5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh- Quirino District Engineering Office Will Hold A Pre-bid Conference On February 5, 2025 9:00 A.m. Via Zoom Meeting Id: 460 121 7399 Passcode: Pru_24 At Conference Room, Dpwh Quirino District Engineering Office And Through Live-stream On Youtube Channel: Www.youtube.com/@dpwh.quirino.districteo, Which Shall Be Open To Prospective Bidders. 11. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_quirino@dpwh.gov.ph For Electronic Submission On Or Before February 19, 2025 Not Later Than 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 13. Bid Opening Shall Be On February 19, 2025 Immediately After The Deadline Of Submission Of Bids, Via Zoom (same Id And Passcode With The Pre-bid Conference) At Conference Room, Dpwh Quirino District Engineering Office And Through Live-stream On Youtube Channel: Https://www.youtube.com/@dpwhquirinodeoproclivestream. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 14. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 15. If At The Time Of The Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii)(c) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No.9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid. 16. The Dpwh- Quirino District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 17. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Www.youtube.com/@dpwh.quirino.districteo For Online Bid Submission: Electronicbids_quirino@dpwh.gov.ph 18. For Further Information, Please Refer To: Brenda B. Carbonel Head, Procurement Staff Email Address: Carbonel.brenda@dpwh.gov.ph