Fabrication Tenders

Description: Sam.gov Announcement the United States Special Operations Command (ussocom) Directorate Of Procurement, On Behalf Of The Program Executive Office – Maritime (peo-m), Is Hosting An Industry Engagement (ie) Event For The Combatant Craft Medium Mark 2 (ccm Mk2) Program. This Event Will Foster Open Dialogue Between The Program Manager For Surface Systems (pm-ss) And Prospective Industry Partners. industry Engagement Event Details date: 8-10 April 2025 location: Tampa, Florida the Purpose Of This Event Is To Communicate Program Requirements, Acquisition Strategies, And Technical Objectives, As Well As To Obtain Industry Feedback. Attendance Will Provide Insight Into Ussocom's Intent To Pursue A Competitive Prototype Agreement Leveraging Other Transaction Authorities Under 10 U.s.c. 4022. event Objectives inform Industry: Discuss Program Goals, Technical Requirements, And Acquisition Strategies. engage With Vendors: Facilitate Vendor Discussions Regarding Their Roles As Prime Performers, Sub-performers, Or Technology Partners. encourage Innovation: Identify Non-traditional Defense Contractors And Innovative Industry Solutions For The Ccm Mk2 Prototype. prepare For Prototyping: Outline Requirements And Schedule Milestones For The Ccm Mk2 Prototype And Foster Collaboration To Meet Ussocom's Mission Objectives. ccm Mk2 Program Overview the Ccm Mk2 Will Replace The Ccm Mk1 With A High-speed, Aluminum-hulled Craft Designed To Enhance Ussocom’s Maritime Capabilities. It Incorporates Advanced Materials And Technologies To Support Multi-role Capabilities For Maritime Missions. This Effort Includes The Design Consulting, Prototyping, Fabrication, And Outfitting Of A Single Ccm Mk2 Prototype, With The Potential For A Follow-on Production Contract Or Agreement. key Specifications hull Material: High-performance Aluminum. engines: Twin 1,600 Hp Marine Diesels propulsors: Marine Waterjets dimensions: Length 68.6 Ft, Beam 14.2 Ft, Draft 3.6 Ft. fuel: Diesel, With A Capacity Of Approximately 3,200 Gallons. mobility: Configured For Road And Military Aircraft Transport. registration participants Must Register With The Points Of Contact Listed Below By Completing The Registration Form (attachment 1) No Later Than Cob February 21, 2025. Please Note That Attendance Information Will Not Be Made Available To The Public. discussions At The Event Will Be Held Up To The Controlled Unclassified Information (cui) Level. All Attendees Must Be U.s. Citizens, And Foreign Participation Is Not Authorized. participants Must Be Certified To Receive Military Critical Technical Data Under The Us/canada Joint Certification Program (jcp) (jcp Website) And Capable Of Receiving, Creating, Processing, Analyzing, And Storing Us Classified Information Up To And Including Secret. attendance Limitations: due To Limited Seating, Attendance Is Restricted To Two (2) Representatives Per Company. registration Will Close Once Seating Capacity Is Reached Or At Cob 21 February 2025, Whichever Comes First. prime Performer Candidates May Include Registered Sub-performer Teammates As Participants In Their Scheduled One-on-one Meetings. notice For Prime Vendors vendors Intending To Act As Primes Must Submit Their Notice Of Intent To Prime Via Attachment 1 To Receive Access To Government Furnished Information (gfi) Related To The Ccm Mk2 Program. each Prime Vendor Is Informed That They Must Meet Facility And Personnel Security Clearance Requirements For Handling And Storage Of Classified Material Up To The Secret // Noforn Level In Accordance With The National Industrial Security Program In Order To Manufacture The Ccm Mk2 Craft. Please Indicate Your Company’s Current Ability To Meet Clearance Requirements For Classified Material Up To The Secret // Noforn Level. the Pm-ss Will Review These Submissions, And Valid Prime Vendors Will Be Provided Cui Gfi To Support White Paper Submissions. Gfi Will Only Be Provided To Vendors Who Submit Their Intent To Prime And Are Verified By The Program Management Office. government Furnished Information (gfi) Content: the Gfi Will Include Preliminary Design Technical Data Related To The Ccm Mk2 vendors Must Have The Necessary Security Clearances And Meet All Other Security Requirements Outlined In This Announcement To Receive And Handle Gfi. event Format the Ie Event Will Include The Following Activities: informational Briefings q&a Panels one-on-one Vendor Meetings (for Vendors Intending To Submit A White Paper As A Prime Performer). schedule one-on-one Meetings: These Sessions Are Limited To Vendors Intending To Submit A White Paper As A Prime Performer And Their Registered Sub-performer Teammates. Meetings Will Be Limited To 45-minute Sessions And Focus On Discussing The Vendor’s Current Capabilities To Fulfill The Ccm Mk2 Requirements. vendors Who Do Not Intend To Submit A White Paper Or Demonstrate An Approach May Still Attend The Information Briefing And General Q&a Session. note: If Desired, Vendors Should Request A One-on-one Meeting On Their Registration Form. points Of Contact michael S. Longdon, Agreements Officer email: Michael.longdon@socom.mil joshua Myers, Agreements Specialist email: Joshua.t.myers.civ@socom.mil rodney Bundy, Agreements Support Specialist email: Rodney.l.bundy.ctr@socom.mil notice: Attendance At This Event Does Not Guarantee A Subsequent Award. Submission Of Proprietary Information Constitutes Consent To Share Responses With Authorized Government Support Contractors.

Details: Description Local Government Of Valencia Catarata Street, Poblacion, Valencia City, Bukidnon, Philippines Philippine Access (088) 828-5430 Contract Reference No. 11-2025 01/28/2025 Invitation To Bid For The Construction Of Multi-purpose Building (city Engineering Office Building) At Barangay Bagontaas, Valencia City, Bukidnon 1. The City Government Of Valencia Through Its Annual Appropriations Intends To Apply The Sum Of Twenty-eight Million Five Hundred Thousand Four Hundred Twenty-nine Pesos And 74/100 (php 28,500,429.74) Being The Approved Budget Of The Contract (abc) To Payments Under The Contract For The Construction Of Multi-purpose Building (city Engineering Office Building) At Barangay Bagontaas, Valencia City, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Valencia Now Invites Bids For The Construction Of Multi-purpose Building (city Engineering Office Building) At Barangay Bagontaas, Valencia City, Bukidnon. Particulars Describes As Follows: Item No. Qty Unit Description Specifications Unit Cost Total Cost 1 1 Lot Construction Of Multi-purpose Building (city Engineering Office Building) See Attached Plan And Specifications Php28,500,429.74 Scope Of Works: Construction Of City Engineering Office (ceo): Scope; A.) Application Of Permits And Clearances, B.) Fabrication And Installation Of Project Billboard And Signboard, C.) Occupational Safety And Health Program, D.) Project Mobilization And Demobilization, E.) Clearing And Grubbing, F.) Structure Excavation, Embankment And Gravel Fill Of Concrete Structures, G.) Construction Of Reinforced Concrete Structures With Metal Reinforcement Such As Footing, Wall Footing, Columns, Beams, Floor Slab And Roof Deck, H.) Fabrication And Installation Of Formworks And Falseworks, I.) Laying Of 100mm Chb With Cement Plaster Finish, J.) Installation Of Doors And Windows, K.) Installation Of Spandrel Ceiling With Metal Frame, L.) Installation Of Unglazed Tiles, M.) Application Of Waterproofing Cement Base, N.) Painting Of Concrete And Steel Structures, O.) Fabrication And Installation Of Structural Steel Roof Framing, Metal Roofing Sheet And Accessories, P.) Fabrication And Installation Of Stainless Steel Built-up Letters, Fascia Frame And Board, Q.) Installation Of Sanitary Pipes And Fittings, Water Supply Pipes And Fittings (including Water Pump And 2 Stainless Steel Water Tank) And Storm Drainage And Downspout, R.) Installation Of Electrical Conduits And Boxes, Wires And Wiring Devices, Panel Boards And Lighting Fixtures (which Also Include Wirings And Devices For The Preparation Of All Air Conditioners), S.) Installation Of Fire Alarm System, Network Cabling, Closed-circuit Television (cctv) And Fire Extinguisher As Per Approved Pow, Plans, And Specifications. Part I Other General Requirements B.3 (1) 1.00 L.s. Permits And Clearances B.5 (1) 1.00 Ea. Project Billboard / Signboard B.7 (1) 1.00 L.s. Occupational Safety And Health Program B.9 (1) 1.00 L.s. Mobilization / Demobilization Part A Earthwork 800 (1) 880.90 Sq.m Clearing And Grubbing 803 (1) A 402.96 Cu.m. Structure Excavation (common Soil) 804 (1) A 382.71 Cu.m. Embankment From Structure Excavation(common Soil) 804 (7) 68.82 Cu.m. Gravel Fill Part B Plain And Reinforced Concrete Work 900 (1) C 460.94 Cu.m. Structural Concrete (3000psi, Class A, 28 Days) 902 (1) A1 76,634.61 Kg. Reinforcing Steel (deformed, Grade 40 Main Bar & Grade 33 Shear Reinforcement ) 903 (2) 2,655.87 Sq.m. Formworks And Falseworks C.1 Masonry Works 1046 (2) A1 1,211.07 Sq.m. Chb Non Load Bearing (including Reinforcing Steel, 100mm) C.2 Fabricated Materials 1006 (5) 3.00 Set Fire Rated Fire Exit Steel Door 1007 (1) B 25.20 Sq.m. Aluminum Framed Glass Door (swing Type) 1008 (1) C 161.53 Sq.m. Aluminum Glass Windows (awning Type) 1008 (1) D 111.13 Sq.m. Aluminum Glass Windows (fixed Type) 1010 (2) B 38.43 Sq.m. Doors (wooden Panel) C.3 Finishing Works 1003 (1) E2 167.45 Sq.m. Ceiling (prepainted Metal Panel On Metal Frame)-spandrel 1003 (1) H 176.17 Sq.m. Ceiling (pvc Panel On Metal Frame) 1003 (1) E1 73.62 Sq.m. Ceiling (gypsum Board On Metal Frame) 1003 (11) A1 30.65 M Fascia Board (9mm Thk. Fiber Cement Board) 1018 (5) 312.54 Sq.m. Glazed Tiles 1018 (2) 219.42 Sq.m. Unglazed Tiles 1021 (1) A 13.64 Sq.m. Cement Floor Finish (plain Non-skid) 1021 (1) C 1,001.44 Sq.m. Cement Floor Finish (with Floor Hardener) 1027 (1) 2,885.44 Sq.m. Cement Plaster Finish 1016(1)a 601.14 Sq.m. Waterproofing Cement Base C.4 Painting Works 1032 (1) A 2,959.06 Sq.m. Painting Works (masonry) 1032 (1) C 933.80 Sq.m. Painting Works (steel) C.5 Roof Framing And Roofing Works 1013 (2) F 45.00 L.m. Fabricated Metal Roofing Accessory - End Capping, 0.4mm Thk. 1013 (2) B1 17.00 L.m. Fabricated Metal Roofing Accessory - Gutter, 0.4mm Thk. 1014 (1) B2 233.10 Sq.m. Prepainted Metal Sheets (rib Type, Long Span, Above 0.427 Mm) 1047 (6) 9,193.43 Kg Structural Steel 1047 8) B 1,638.34 Kg. Structural Steel (purlins) 1047 (4) 88.00 Kg. Metal Structure Accessories (cross Bracing) 1047 (6) 162.63 Kg. Metal Structure Accessories (steel Plates) 1047 (4) A 37.72 Kg. Metal Structure Accessories (bolts) 1047 (5) B 72.71 Kg. Metal Structure Accessories (sagrods) - 12mmø 1047 (8) A 1,416.80 Kgs Structural Steel (trusses) Spl-i 1.00 L.s. Stainless Steel Built Up Letters C.6 Plumbing Works 1001 (5) B 6.00 Ea. Catch Basin (chb) 1001 (8) 1.00 L.s. Sewer Line Works 1001 (9) 1.00 L.s. Storm Drainage And Downspout 1001 (11) 1.00 L.s. Septic Vault (concrete) 1002 (4) 1.00 L.s. Plumbing Fixtures 1002(24) 1.00 L.s. Cold Water Lines 1002 (27) 1.00 L.s. Plumbing Works Part D Electrical Work 1100 (10) 1.00 L.s. Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) 1101 (33) 1.00 L.s. Wires And Wiring Devices 1102 (2) B 1.00 L.s. Panel Board With Main/branch Breakers 1103 (1) 1.00 L.s Lighting Fixture And Lamps 1109 (1) 1.00 L.s Grounding System 1111 1.00 L.s. Miscellaneous Electrical/civil Works 1200 1.00 L.s. Air Conditioning And Ventilating System Part E Mechanical Work 1208 (1) 1.00 L.s Fire Alarm System (fdas) 1106 (1) 1.00 L.s. Closed-circuit Television (cctv) 1105 (20) 1.00 L.s. Network Cabling 1202 (6) A1 1.00 Set Fire Extinguisher (10 Lbs., Abc With Bracket) Php28,500,429.74 Required Number Of Days For Completion Is 300 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project Within 10 Years From The Date Of Submission And Receipt Of The Bid Hereof. The Description Of An "eligible Bidder" Is Contained In The Bidding Documents, Particularly In Section Ii. Instructions To Bidders. 3. No Time Extension Shall Be Granted Unless On Fortuitous Event, Acts Of Nature Or Any Natural Calamities. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary "pass/fail" Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act". Bidding Is Restricted To Filipino Citizens, Sole Proprietorship, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 5. Interested Bidders May Obtain Further Information From Josafat L. Caipang, Head Of Lgu-valencia City Bac Secretariat And Inspect The Bidding Documents At Address Given Below From Mondays-fridays 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On January 29, 2025 To Opening Date From The Address Below And Upon Payment Of Non-refundable Fee For The Bidding Documents In The Amount Twenty-five Thousand Pesos (php 25,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That The Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Site Inspection Is Required From Every Interested Bidder And Site Inspection Certificate Shall Form Part Of The Bid Documents. No Site Inspection Certificate Shall Mean Automatic Disqualification. Site Inspection Schedule Is On February 3, 2025 At 10:00 O’clock In The Morning, Assembly Area At Bac Office. 6. The City Government Of Valencia Will Hold Its Pre-bid Conference On February 6, 2025 (1:30 Pm) At The Bac Office, City Hall Compound, City Of Valencia, Bukidnon Which Shall Be Open To All Interested Bidders. 7. Only Project Engineers, Materials Engineer And The Like Are Required To Attend The Pre-bid Conference. In The Absence Of The Same, The Representative Must Present To The Bac An Authorization Letter Signed By The Owner. 8. Interested Contractor Are Required To Include In Their Technical Bid Proposal The Duly Signed List Of Contractor's Equipment Units, Which Are Owned, Leased And/or Under Purchase Agreements, Supported By Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project. 9. Prospective Bidders Who Were Not Able To Purchase Bid Documents Prior To The Bid Opening Shall Not Be Opened And Will Be Disqualified. 10. Bids Must Be Delivered To The Address Below On Or Before (1:00 Pm) February 20, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representative Who Chooses To Attend At The Address Below. Bid Opening Shall Be On (1:30 Pm) February 20, 2025at Bac Office, City Hall Compound, City Of Valencia, Bukidnon. Late Bids Shall Not Be Accepted. The Clock In The Bac Office Shall Serve As The Time Reference, And Shall Be The Basis For The Official Time Received Of The Bidding Documents Submitted In The Office. 11. The City Government Of Valencia Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of The Bid. 12. The Head Of The Procuring Entity (hope) Reserves The Right To Accept Or Reject Any Or All Bids To Annul The Bidding Process, At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. All Correspondence Shall Be Addressed To The Bac Secretariat, Attention: Mr. Abe P. Gillaco, Mpa, Bac Chairman. 14. For Further Information, Please Refer To: Lgu Valencia City-josafat L. Caipang Admin Office, 8709 Catarata St., Poblacion, Valencia City, Bukidnon Tel. No. (088) 828-5430 Abe P. Gillaco, Mpa Bac Chairman

Details: Description Invitation To Bid For 25ka0086 Construction Of Classroom Building Construction At Barangay 9 Elementary School, Barangay 9, Malaybalay City, Bukidnon Barangay 9, Malaybalay City, Bukidnon 1. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City, Through The Gaa 2025 Intends To Apply The Sum Of Php 29,700,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25ka0086 Construction Of Classroom Building Construction At Barangay 9 Elementary School, Barangay 9, Malaybalay City, Bukidnon Barangay 9, Malaybalay City, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening 2. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Contract Id : 25ka0086 Contract Name : Construction Of Classroom Building Construction At Barangay 9 Elementary School, Barangay 9, Malaybalay City, Bukidnon Contract Location : Barangay 9, Malaybalay City, Bukidnon Scope Of Work : Construction Of Multi-purpose Building: A.) Structure Excavation Of Footing, Tie Beam And Wall Footing; B.) Fabrication And Installation Of Formworks And False Works; C.) Laying Of Embankment (from Excavation) And Gravel Fill; D.) Construction Of Reinforced Concrete Structures Such As Footing, Wall Footing, Beams, Columns, Lintel Beams And Slab On Grade; E.) Chb Laying And Plastering For Perimeter Walls And Partition Walls; F.) Installation Of Metal Structures (trusses, Purlins, Fascia Frame) With Metal Structure Accessories Such As Steel Plates With Bolts And Sag Rods; G.) Installation Of Rib Type Roofing, Long Span, Above 0.427mm With Flashings; H.) Installation Of Ceiling Works (fiber Cement On Metal Frame); I.) Painting Works Masonry, Woods And All Steel Surfaces; J.) Fabrication And Installation Of Doors With Transom, And Aluminum Windows, And Stainless Steel Railings; K.) Supply Installation Of Finishing Hardware ; L.) Fabrication And Installation Of Cabinetry; M.) Laying Of Floor And Wall Finishes (glazed And Unglazed Tile); N.) Laying Of Pipes For Waste And Sewer Line; O.) Laying Of Pipes And Fittings For Waterline System; P.) Supply And Installation Of Plumbing Fixtures; Q.) Electrical Works; R.) Mechanical Works: Installation Of Oscillating Ceiling Fan, Exhaust Fan (ceiling Cassette), Air-conditioning (split Type), Fire Extinguisher (4.54kg, Abc With Bracket), And Fire Alarm System; S.) Supply And Installation Of Solar Panels; T.) Application Of Soil Poisoning Chemical Prior To Concrete Pouring Of Slab-on Grade, Tie Beam, Wall Footing, Footing And Building Perimeter After Building Is Complete. Complete As Per Approved Pow, Plans, And Specifications. Approved Budget For The Contract (abc) : Php 29,700,000.00 Source Of Fund : Gaa 2025 Contract Duration : 340 C.d. Bid Documents Fee In Php : Php 25,000.00 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D For Small B. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City And Inspect The Bidding Documents At Capitol Compound, Malaybalay City During Weekdays From 8:00 Am – 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 18, 2024, From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 25,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Will Hold A Pre-bid Conference On January 30,2025, 10:00 Am Via Zoom With Meeting Id: 923 1132 1070 And Passcode: Dpwh2024 And The Bidder May View Through Live Streaming (youtube Channel) Dpwh Bukidnon 1st Deo Procurement Ls, Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_bukidnon1@dpwh.gov.ph For Electronic Submission On Or Before February 11, 2025 Until 10:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On February 11,2025, 10:00 Am At Conference Room, Dpwh-bukidnon 1st Deo. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Department Of Public Works And Highways – Bukidnon 1st District Engineering Office, Malaybalay City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Rosmendo C. Bongocan, Jr. Engineer Iii Head, Procurement Unit Telefax No. (088) 813-2087 Cellphone No.09178765473 Bongocan.rosmendo_jr@dpwh.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph And Philgeps Website For Online Bid Submission: Electronicbids_bukidnon1@dpwh.gov.ph Approved By: Sarah Jane B. Lagrama Bac Chairperson Date Of Publication: January 18,2025

Details: Description Invitation To Apply For Eligibility And Bid The Municipality Of Maasin, Iloilo, Through Its Bids And Awards Committee (bac), Invites Suppliers/ Distributors/ Contractors To Apply For Eligibility And To Bid For The Hereunder Project: Name Of Project : Purchase Of Materials For Tultugan Festival In Participation On Kasadyahan 2025 Location : Maasin, Iloilo Brief Description : Fabrication & Installation Of Props And Accessories Approved Budget For The Contract : ₱1,857,200.00 Delivery Period : 15 Cd Prospective Bidders Should Have Experience In Undertaking A Similar Project Within The Last 2 Years With An Amount Of At Least 50% Of The Proposed Project For Bidding. The Eligibility Check/screening As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary "pass/fail" Criteria. Post-qualification Of The Lowest Calculated Bid Shall Be Conducted. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre- Bidding Conference(s), Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulation (irr). The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Pre-procurement Conference December 23, 2024 2. Advertisement & Purchase Of Bid Docs January 7, 2025-january 14, 2025 3. Eligibility Screening None 4. Pre-bid Conference January 10, 2025 @ 10:00am 5. Submission And Opening Receipt Of Bids January 15, 2025 @ 10:00am 6. Bid Evaluation January 16, 2025 7. Post-qualification January 17, 2025 8. Notice Of Award January 20, 2025 Bidders Are Required To Submit Three (3) Sets Of Eligibility, Technical And Financial Envelopes. All Envelopes Must Be Properly Sealed And Labeled Including The Name Of The Project And Schedule Of Bid Opening. Improperly Sealed And Labeled Envelopes Will Not Be Opened. All Bidding Documents Are Available At Bac Office, Maasin, Iloilo Upon Payment Of A Non-refundable Amount Of P 1,000.00 To The Municipal Treasurer, Maasin, Iloilo. For Failure To Drop Bid On The Scheduled Date, Suppliers/bidders Are Required To Submit A Letter Informing The Bac The Reason Thereof, Before The Bid Opening. Otherwise, The Bac Reserves The Right To Blacklist Said Supplier/bidder. Date Of Publication: January 7, 2025 Engr. Juan M. Rentoy, Jr. Mpdc/bac Chairman

Details: Description 1 L.s. Permits And Clearances 3.8 Mo. Occupation Safety And Health Program 1 L.s. Project Marker (for Slaughterhouse And Wet Market) Earthworks 36.8 Cu.m. Structure Excavation (common Soil) 36.8 Cu.m. Embankment From Roadway/structure Excavation 17.06 Cu.m. Embankment From Borrow 833.38 Cu.m. Gravel Fill C Plain & Reinforced Concrete Works 57.27 Cu.m. Reinforced Concrete 744 Kgs Reinforced Steel (deformed) Grade 40 1,772.76 Kgs Reinforced Steel (deformed) Grade 60 121.13 Sq.m. Formworks And Falseworks Finishing And Other Civil Works 1 L.s. Aluminum Glass Windows 1 L.s. Wooden Door And Windows 9.2 M. Fabricated Metal Roofing Accessory (ridge Roll) 25.6 M Fabricated Metal Roofing Accessory (flashing) 21.5 M Fabricated Metal Roofing Accessory (gutter) 113.58 Sq.m. Prepainted Metal Sheets (rib Type, Long Span 0.5mm Thk) 178.13 Sq.m. Cement Plaster Finish 89.67 Sq.m. Painting Works (steel) 63.63 Sq.m. 150mm Chb Non-load Bearing (including Reinforcing Steel) 897.26 Kgs Structural Steel, Trusses 1,511.28 Kgs Structural Steel, Purlins 4 Pcs Metal Structure Accessories (turnbuckle) 26.66 Kgs Metal Structure Accessories (cross Bracing) 14.81 Kgs Metal Structure Accessories (sagrods) 47.61 Sq.m. Cement Based Waterproofing Plumbing/sanitary Works 1 L.,s. Sewer Line Works 1 L.s. Storm Drainage And Downspout 1 L.s. Septic Vault 1 L.s. Sanitary/plumbing Fixtures 1 L.s. Cold Water Lines Electrical 1 L.s. Conduit Boxes And Fittings (conduit Works/conduit Rough-in) 1 L.s. Wires And Wiring Devices 1 L.s. Panelboard With Main And Branch Breakers Xxxnothing Followsxxx

Details: Description Lot 1 216,840.00 1 Monofilament Nylon, 1 Kg/pack, 100 Test Lbs, 1.40 Mm Diameter 30 Pack 2 Plastic Drum, 200-l Capacity, Double Ring 80 Piece 3 Cement, 40 Kg/bag, Of Known Brand 8 Bag 4 Epoxy (a And B) 10 Liter 5 Netting Needle, Small 60 Piece 6 Heavy Duty Scissors 7 Piece 7 Rubberized Multifilament Twine (210/8, Big Spool) 7 Spool 8 Polyethylene Rope #14, 7 Mm Diameter, 200 M/roll 10 Roll 9 Fine Mesh Net, 5 Ft X 50 Meters, Blue 2 Roll 10 "impact Wireless Wrench Brushless, Atleast 3ah Battery, 20v Input Voltage, 330nm Torque, 0-4200rpm No Load Speed, Impact Frequency. 0-3800rpm, With 17mm Wrench 3in Long Socket " 1 Unit Lot 2 350,000.00 1 Fabricated Cage Net With Cover 10 Unit -square 5x5x5m - Using #17 Pe Knotted Net 400/12 Fabricated Cage Net With Cover -with Extended Rope On Every Corner Of Atleast 1m @8 Corners - Hand Mended On Edges And Sides Using Multifilament Twine 210/8 Lot 3 350,000.00 1 Fabricated Gi Cage Frame 10 Unit Specifications: -square 6x6m Outer Measurement -using Gi Pipe S20 2"diameter - Fully Welded Frame (600cmx40cm Per Welded Frame With 4 Support Bracket Distributed Evenly) -prepainted With Metal Primer (any Color) And Enamel Paint (blue) -with 10 Drop Forge Swivel Couplers 2" Diameter/ Unit Lot 4 32,000.00 1 Bamboo Bayog Full Length (6m Minimum) 80 Piece Note: 1) Supply And On-site Delivery On Techno-demo Sites Within 60 Calendar Days (see Attached Breakdown Per Province) Total 948,840.00

Details: Description Rfq No. 0077-25 One (1) Lot Supply And Delivery Of Special Design Kathabi Exhibit Venue: Summit Hall E&f, Delegation Bldg., Picc Complex, Pasay City Supply And Delivery Of Special Design Kathabi Exhibit Venue: Summit Hall E&f, Delegation Bldg., Picc Complex, Pasay City 1. Conceptualization And Design Layout 2. Fabrication Of Exhibit Booth Collaterals A. 3 Units Backwall (white Paint) With 60 In Metal Tubing For Fabric Rollers B.10 Units Cloth And Fabric Hanger (1m X 2m Height) With Black Color C. 10 Units Cloth And Fabric Hanger (1m X 1.5m Height) With Black Color D. Wooden 3d Philippine Map (light Brown Color) -50inx80in Dimension -basswood Material With 3mm To 12mm Thick E. 5ft Letter Standee (ptri Logo Text) White Color F. 40 Units Of Folded Chairs And 25 Units Of Office Table 3. Setting Up Of 4xm4m Networking And Information Lounge - Sofa Set With Coffee Table - Plant Design Decoration - Display Tv 4. Setting Up Of Centerpiece Exhibit Per Approved Layout Design 5. Printing Of Graphics And Fascia Board 6. Lighting And Signage - Spotlight Set Up 7. Flooring Set Up -needle-punched Carpet Installation 8. Electrical & Wiring -4 Units 60amp Breaker, 220v Single-phase -lighting Breaker 20-apm -25 Electrical Outlets With 2 Gang Switches - Electrical Wirings 9. Transportation And Logistics -transportation Of Exhibit Materials And Other Collaterals For Setup To Picc -dismantling And Delivery Of Exhibit Materials And Other Collaterals For Setup To Dost-ptri 10. Ingress And Egress (night Installation And Dismantling) Ingress: 29 January 2025, 6 Pm Onwards Egress: 31 January 2025, 9 Pm Onwards 11. Others Manning For Exhibit Maintenance During Exhibit Proper (at Least 2 Personnel) Including Meals, Transportation, And Accommodation Inclusive Of Taxes And Other Duties Please Submit The Following Together With Your Offer: 1. Mayor's Permit 2. Philgeps Registration Number 3. Notarized Omnibus Sworn Statement 4. Business/income Tax Return

Details: Title: Prestations De Service Dans Le Domaine De La Biologie Et De La Physiopathologie De Maladies Neuromusculaires description: La Cardiomyopathie Dilatée Liée Au Lmna (lmna-dcm) Est Une Maladie Grave Et Héréditaire Causée Par Des Mutations Du Gène Lmna. Ce Gène Fournit Des Instructions Pour La Fabrication De Protéines Appelées Lamines De Type A (lamines A/c), Qui Aident À Maintenir La Structure Du Noyau Cellulaire Et Jouent Un Rôle Important Dans La Régulation De L'organisation De La Chromatine, De L'expression Des Gènes Et De L'organisation Du Cytosquelette En Interagissant Avec De Nombreuses Autres Protéines. Actuellement, Il N'existe Pas De Traitement Efficace Pour Le Lmna-dcm Car Nous Ne Comprenons Pas Entièrement Les Mécanismes Sous-jacents De La Maladie. L'objectif 2 Recherche Le(s) Mécanisme(s) Sous-jacent(s) De La Maladie Qui Contribue(nt) À La Dcm Liée Au Lmna, En Découvrant Les Processus Cellulaires Et Moléculaires Complexes Qui Sous-tendent La Pathogenèse Et La Progression De La Maladie À L'aide De Technologies De Pointe. Les Prestations À Réaliser Sont Les Suivantes : - Evaluation Quantitative De L'architecture Globale Du Réseau Mt, La Distribution Des Modifications Post-traductionnelles De La Tubuline Et La Dynamique De La Mt Dans Les Ipsc-cms Mutants Lmna Et Témoins Sains, Ainsi Que Dans Les Cardiomyocytes De Souris Adultes. - Tests Pour Déterminer Si Le Ciblage Des Modifications Post-traductionnelles Des Mt Perturbées Améliore La Structure Et La Fonction Du Cytosquelette Et Du Noyau. L'élucidation De La Manière Dont Le Cytosquelette Des Mt Est Modifié Dans Le Lmna-dcm Et Dont Ces Modifications Contribuent À La Pathogenèse De La Maladie Pourrait Fournir De Nouveaux Moyens De Préserver La Structure Et La Fonction Cardiaques Dans Le Lmna-dcm, Ainsi Que Dans D'autres Cardiomyopathies Dont L'organisation Des Mt Est Perturbée. - La Remise D'un Rapport Trimestriel.

Services in the field of biology and pathophysiology of neuromuscular diseases

Details: 8 Goods (y) Non Stock --- Yes Consignee Inr description :supply And Installation(fixing) Of 304 Grade Ss Oval 3 Seater Bench Without Cushion And Witho ut Arm And Back Rest. Style : Ss 304 Grade Surface Mount Stainless Steel Bench - Without Back Rest. design: Reference Photo Attached. Seating Capacity: 3 (three) Material Of Legs Ss 304 Grade Or Ss 316 Or Hi gher. Seat Cushion: Without Cushion Material Of Seat: Ss 304 Or Ss 316 Or Higher. Punching/perforation In S eating Plate And Backrest: Yes Required. All Fabrication Work Complete With Using: Cnc Laser Cutting/water J et Cutting (no Shearing) And Argon Welding. Argonwelding Complete By Using Suitable Ss 304 Grade Welding rods And Tig (tungsten Inert Gas). Treatment Of Welds With K2 Solution Material Of Bench Ss 304 Or Ss 316 or Higher. Material Of Bench: Ss 304 Or Ss 316 Or Higher. Thickness Of Stainless Steel Sheet: 2 Mm. Round Pi pe Size: 40mm Dia With 2 Mm Thickness. Square Pipe Size: 50 Mm * 50 Mm - 2 Mm Thickness Base Plate Thi ckness: 8 Mm. Type Of Bolts: 10 Mm * 100 Mm. Overall Length In Mm (+/- 50 Mm): 1300 Mm (for 3- Seater) overall Depth In Mm (+/- 10 Mm): 450 Mm Overall Height In Mm ( +/- 10 Mm:450 Mm Base Plate Size (to B e Fixed On Ground): 400 Mm X 120 Mm X 8 Mm. Connecting Leg Size (for Connecting Base Plate To Seat): 3 20 Mm X 40 Mm Separation Of Seating Space: By Using Square Pipe Of Size 50mm X 50 Mm. Finishing / Polis hing. Of Product: Ss Mat Finish. No Welding Marks To Be Visible. Delivery Status: Knocked Down Supply-to B e Assembled By Consignor At The Below Mentioned Amrit Bharat Stations Over Mas Division. Weight Of The B ench In Kg (+/- 5 Kg): 50 Kg Warranty : 5 Years. Confirmatory Test In Respect Of Stainless Steel: Grade 304 or 316 Or Higher Quality. Third Party Inspection Required. Sample Requirements: 1 Nos. Unit Of Sample To Be produced Before The Third Party Inspection To The Consignee Amrit Bharat Stations - Sullurpeta Railway station (40 Nos.), St. Thomas Mount Railway Station (15 Nos.)