Fabrication Tenders

Details: Description Item No. Item & Description Qty. Unit Preventive Maintenance And Calibration Of To Be Scheduled In May 2025 1 Fumehood 72" Model: Fh1200 Brand: Biobase 1 2 Fumehood 48" Model: Fh1200 Brand: Biobase 2 3 Fumehood (old) 29x28" Model: Fabricated Brand: Biobase 1 4 Biosafety Cabinet 72" Model: Labtech Brand: Daihan 1 Scope Of Works: 1. Standard Check-up Of Unit, General Cleaning, Adjustment Of Equipment In Reference To Traceable Standard; 2. Calibration Of Equipment; 3. Service Provider Should Issue Preventive Maintenance Report, Certificate Of Calibration And Stickers, And Copy Of The Technicians Certificate Of Training And Certificate Of Calibrating Tools Used. ***nothing Follows***

Details: Description:- Supply, Installation, Testing & Commissioning Of A Pre-engineered, Factory Fabricated, assembled & Tested, Fully Integrated, Highly Efficient Pump, Ie5 Permanent Magnet Motors, Skid mounted, Complete Ready-to-connect Packaged Variable Speed Pressure Boosting System. The Pump shall Be Vertical Multi Stage Centrifugal Pump With 200 Cmh At 20mtrs Head With Shut Off Head Of 45 mtrs, High Efficiency Ie5 Motors With Integrated Variable Frequency Drive, Intelligent Multi-pump controller. Pump Shall Be Suitable For Existing System. Ced Coated. The Controller And Vfd Shall Be integrated Part Of Motor And Suitable To Ip55 Rating. Similar To Grundfos Cre 155-1-1 With 18.5kw motor With Inbuilt Vfd

Details: The Work Involves Providing Electrical Services Across Various Company Areas Including The Refinery Sitra, Marketing Terminal Wharf Awali, Gas Distribution Network And The Bmp Key Activities Include Supplying Manpower For Preventive Predictive And Corrective Maintenance As Well As Handling Turnaround And Inspection Works For Scheduled And Emergency Shutdowns The Contract Also Covers One Off Jobs For Corrective Maintenance Or Project Work Including Labor And Materials Additional Activities Include Supplying Rental Equipmentsubcontracting Specialized Technical Support From Oems Maintaining And Installing Electrical Assets Fabricating Supports For Electrical Devices And Performing Minor Civil Works Related To Electrical Assets These Requirements Will Be Managed Through Purchase Agreements And Relevant Purchase Orders The Contractors Personnel Will Work Under The Companys Direction But Will Be Responsible For The Safety Quality Quantity And Accuracy Of Their Work

Details: Description Item No. Item & Description Qty. Unit Preventive Maintenance And Calibration Of To Be Scheduled In May 2025 1 Fumehood 72" Model: Fh1200 Brand: Biobase 1 2 Fumehood 48" Model: Fh1200 Brand: Biobase 2 3 Fumehood (old) 29x28" Model: Fabricated Brand: Biobase 1 4 Biosafety Cabinet 72" Model: Labtech Brand: Daihan 1 Scope Of Works: 1. Standard Check-up Of Unit, General Cleaning, Adjustment Of Equipment In Reference To Traceable Standard; 2. Calibration Of Equipment; 3. Service Provider Should Issue Preventive Maintenance Reoprt, Certificate Of Calibration And Stickers, And Copy Of The Technicians Certificate Of Training And Certificate Of Calibrating Tools Used. ***nothing Follows***

Description: CATEGORY: SITC of factory built floor mounted chilled water double skin type horizontal vertical air handling units , 14200 CFM 65 mm wg static pressure 33.2 TR , 12000 CFM 65 mm wg static pressure 28.3 TR , 11000 CFM 65 mm wg static pressure 24.4 TR , 10190 CFM 65 mm wg static pressure 21.4 TR , 9600CFM 65 mm wg static pressure 27.7 TR , 9500 CFM 65 mm wg static pressure 23.8 TR , 9000 CFM 65 mm wg static pressure 27.7 TR , 200mm dia. 32 mm thick insulation , 150mm dia.32 mm thick insulation , 125mm dia. 32 mm thick insulation , 100 mm dia. 32 mm thick insulation , 80 mm dia. 32 mm thick insulation , 65 mm dia. 32 mm thick insulation , 50 mm dia. 32 mm thick insulation , SITC of valves strainers gauges in the chilled water plumbing , 65 mm dia. , 50 mm dia. , BALANCING VALVE WITH BUILT IN MEASURING FACILITY , Y STRAINER of Ductile CI Body flanged , Providing and fixing in position the industrial type pressure gauge with gun metal brass valves etc. , Providing and fixing in position the mercury in glass industrial type thermometer , Providing and fixing in position Air Vent for Automatic purging etc. , SITC of electronic self balancing pressure independent type dynamic balancing valve , 40mm dia , SITC of site fabricated GSS sheet metal rectangular round ducting , Thickness 0.80 mm sheet , Thickness 1.00 mm sheet , Thickness 1.25 mm sheet , Supply and fixing of acoustic lining of supply , Providing and fixing 40 mm dia , SITC of 4C x 4 Sqmm 1.1kV grade XLPE , Supplying and making end termination with brass , SITC of 3C x 1.5 Sqmm armoured Copper communication cable , Providing and fixing 6 SWG dia. G.I. wire , Dismantling of existing AHUs of different capacities , Dismantling of existing UVGI system , ismentalling of existing piping valves of different floor AHUs , 150 mm dia. , 125 mm dia. , 100 mm dia. , 80 mm dia.

Details: Description Construction Of Covered Court @ Prk Makatarunganon, Poblacion -mo(0014) Item No. Qty Unit Description Of Articles Of Materials 1 1 Lot Supply Of Labor, Materials, Tools, Equipments And Other Incidental Expenses Necessary To Complete The Project For The "construction Of Covered Court @ Prk Makatarunganon, Poblacion", Polomolok, South Cotabato. Item No. / Scope Of Works / Quantity - Unit 1 Mobilization And Demobilization 1.00 L.s. 2 Billboard 1.00 Each 3 Structure Excavation (common Soil) 129.60 Cu.m. 4 Embankment From Structure Excavation 117.84 Cu.m. 5 Gravel Fill 2.16 Cu.m. 6 Structural Concrete 13.32 Cu.m. 7 Reinforcing Steel 1.00 Lot 8 Formworks And False Works 1.00 Lot 9 Fabricated Metal Roofing Accessory (ridge Roll) 25.20 Ln.m. 10 Prepainted Metal Sheets (0.40mm) Rib-type 566.04 Sq.m. 11 Painting Works (steel) 1.00 Lot 12 Structural Steel (trusses) 1.00 Lot 13 Structural Steel (purlins) 1.00 Lot 14 Structural Steel (strut) 1.00 Lot 15 Metal Structure Accessories (anchor Bolt) 72.00 Each 16 Metal Structure Accessories (turnbuckle) 32.00 Each 17 Metal Structure Accessories (cross Bracing) 1.00 Lot 18 Metal Structure Accessories (sagrods) 1.00 Lot 19 Metal Structure Accessories (steel Plates) 1.00 Lot20 Fabricated Metal Roofing Accessory (gutters) 15.00 Ln.m. 21 Structural Steel 1.00 L.s.

Details: Description Name Of Project: Fabrication & Installation Of Signages Project Location: Patay, Sagada Item No. Item Discription Qty Unit Unit Cost Total B.5 Project Bill Board / Sign Board 1 L.s. B.7(2) Occupational Safety & Health Program 1 Lot 100(2) Clearing And Grubbing 1 L.s. 405(1)a3 Structural Concrete Class A – Minor Structure 2.06 Cu.m. Spl-1 Metal Works 1 L.s. Sub Total Cost Name Of Project: Rehabilitation Of Anga-ang Drainage Canal Project Location: Madongo, Sagada Item No. Item Discription Qty Unit Unit Cost Total B.5 Project Bill Board / Sign Board 1 Each B.7(2) Occupational Safety & Health Program 1 Lot 103(1)a Structure Excavation (common Soil) 31.01 Cu.m. 404 Reinforcing Steel Bars 249.24 Kg. 405 Structural Concrete 6.38 Cu.m. Spl-1 Form Works 1 L.s. 500(1)c 910mm Reinforced Pipe Culvert W/ Inlet 1 L.s. 104 Embankment 8.40 Cu.m. 311(1)a Portland Cement Concrete Pavement (200mm) 8.40 Sq.m. Sub Total Cost Name Of Project: Improvement Of Aguid Pathway Project Location: Aguid, Sagada B.5 Project Bill Board / Sign Board 1 Each B.7(2) Occupational Safety & Health Program 1 Lot 100(2) Clearing And Grubbing 1 Lot 505(2) Grouted Riprap (class A) 16.84 Cu.m. 401 Railing Works 1 Lot 311 Portland Cement Concrete Pavement (100mm Thick) 25.42 Sq.m. Sub Total Cost Name Of Project: Rehabilitation Of Madongo Multi-purpose Building Project Location: Madongo, Sagada B.5 Project Bill Board / Sign Board 1 Each B.7(2) Occupational Safety & Health Program 1 Lot 800(2) Clearing And Grubbing 1 L.s. 1047(1) Structural Steel Roof Framing 1 L.s. 1014 Prepainted Metal Roofing 33.97 Sq.m. 1013(2) Metal Roofing Accessory (ridge Roll & Flashing) 1 L.s. 1003(1)a Marine Plywood On Wood Frame Ceiling 32 Sq.m. Spl 1 Scaffolding Works 1 L.s. Sub Total Cost Total Contract Cost (in Figure) Total Contract Cost (in Words)

Details: Description Republic Of The Philippines Province Of Cagayan Tuguegarao City Provincial Engineer's Office - Motorpool Request For Quotation Company Name: Quotation No. Address: Date: January 21, 2025 Tin Number: Pr No.: 8751-2025-008 Tel/fax: Mode Of Procurement: Negotiated Procurement - Svp (sec. 53.9) E-mail Address: Philgeps Reg. No.: """manufacturers, Suppliers, Distributors, Contractors, And/or Consultants Are Mandated To Register In The Philgeps And Provide A Philgeps Registration Number As A Condition For The Award Of Contract."" Please See Gppb Resolution No. 30-2013 Dated 25 October 2013 " Instructions/note To Bidders: 1.please Indicate The Following Information In Your Bid: A) Company Name, Address, Tel/fax Nos.; B) Philgeps Registration Certificate No. And Date Of Validity; C) Bidder’s Offer (technical Specifications/brand Per Item; D) Unit And Total Price; E) Name Of Bidder’s Authorized Representative; And F) Signature And Date 2. Download This Open Canvass Form From The Philgeps Website Before The Closing Date. 3.bids/quotations May Be Submitted Thru Fax, Email Or Directly To The Bac Secretariat Office On Or Before The Deadline Of Submission Of Bids And Requirements. 4. Suppliers Are Required To Submit The Following Prior To The Notification By The Bac Of The Award: A) Valid And Current Mayor’s/business Permit; B) Professional License/curriculum Vitae (consulting Services); C) Valid And Current Philgeps Registration Certificate/number; D) Philippine Contractor’s Accreditation Board License (infra); E) Income/business Tax Return (for Abc’s Above Php500,000.00); And F) Omnibus Sworn Statement (for Abcs Above Php50,000.00). 5. Bids Should Be Valid For 45 Days Upon The Deadline Of Submission. 6. Delivery Period: ______________________ Upon Receipt Of Purchase Order. 7. Term Of Payment: Charged Account, Unless Specified. 8. The Total Price Quoted Below Is Subject To Withholding Tax And Payable Check. 9. The Approved Budget Of The Contract Is Inclusive Of Delivery Fee. Deadline Of Submission: Three (3) Days Upon Receipt Hereof Or On/before The Closing Date In The Philgeps. Late Quotation Shall Not Be Accepted. Item No. Total Abc Item And Description Unit Qty 1 64,900.00 Job Order: Final Drive Repair Lot 1 Scope Of Work: A. To Provide Brandnew Replacement Parts Of Travel Gearbox For The Following Items: 1. Allen Bolt ( 18 X 65) Pcs 10 2. Steel Guide 18*65 Pcs 10 3. Coupling Pc 1 4. Center Gear Pc 1 5. Center Bolt Gear Pc 1 6. Machining Pc 1 7. Spacer Fabrication Pcs 2 8. Labor Pc 1 By The Authority Of The Procurement Office: (sgd.) Atty. Rogelio R. Taliping Jr. Bac Chairman- Goods And Services

Details: Description Item No. Description Unit Qty Item No. Description Unit Qty 1.00 Earthworks Electrical Pole Base 1.04 Excavation, Medium Cu.m 1.88 2.00 Concreting Works Concrete Pole Base Cu.m 1.85 2.07 Concrete Pouring - Grade Level (manual) Cu.m 1.58 2.01 Portland Cement Bag 17.00 2.10 Concrete Pouring - Elevated Level (manual) Cu.m 0.21 2.02 Crushed Gravel 3/4" Cu.m 2.00 2.03 Washed Sand Cu.m 1.00 3.00 Rebar Works Concrete Pole & Base Kg 86.54 3.02 Rebar - Grade Level Kg 86.54 3.01 Deformed Round Bars, Grade 40 Kg 86.54 3.02 G.i. Tie Wire Kg 2.00 4.00 Formworks Concrete Pole Sq.m 6.50 4.01 Fabrication - Side Forms Lm 20.00 4.01 Coco Lumber Bd.ft 51.00 4.02 Installation - Side Forms @ Grade Level Lm 20.00 4.02 Plywood Ordinary, 1/4" X 4' X 8' Pc 2.00 4.04 Cwn, Assorted Kg 1.00 7.00 Steel Works Steel Electrical Poles 7.45 G.i. Pipe 2"ø Sch.40 Pc 4.00 7.01 Installation - Steel Post/columns Kg 84.00 7.13 Secondary Rack Pc 4.00 7.46 Welding Rod Kg 1.00 10.00 Electrical Works Wires 10.11 22 Mm² Thhn/thwn-2 Wire Stranded M 350.00 10.07 Installation - Service Entrance Cap + Conduit Ea 1.00 10.58 Electrical Tape Pc 5.00 10.09 Installation - Control Panel Ea 1.00 10.59 Rubber Tape Roll 1.00 10.10 Installation - Wires 22mm2 Lm 350.00 Relocation Of Meralco Service Meter Lot 1.00 10.11 Testing & Commisioning Ea 1.00 10.08 Rsc 32mmø Pc 6.00 10.35 Entrance Cap 32mm Dia. Pc 1.00 10.37 Grounding Rod, 2.4m X 16mm Dia. Pc 1.00

Details: Description 1 Lot Provision Of Labor And Materials For Improvement/upgrading Of The Plant Tissue Culture Laboratory At Leyte Academic Center Palo, Leyte In Accordance With The Plan, Design And Specification. Scope Of Works: 1.00 L.s Construction Safety & Health 7.30 Cu.m Structure Excavation (common Soil) 2.50 Cu.m Structural Concrete For Wall Footing, Footing And Slab On Fill 0.94 Cu.m Structural Concrete For Column And Beam 496.55 Kg Reinforcing Steel Of Reinforced Concrete Structures 15.84 Sq.m Formworks And Falseworks 12.60 Sq.m 6mm Marine Plywood On Metal Frame Ceiling 16.01 Sq.m Prepainted Metal Sheets 14.42 M Fabricated Metal Roofing Accessory (ridge Roll/flashing) 1.00 Ls Fabricated Metal Roofing Accessory (metal Fascia) 11.40 Sq.m Glazed Tiles And Trims 60.96 Sq.m Cement Plaster Finish 171.60 Kg Structural Steel Purlins 0.60 Sq.m Aluminum Glass Window(awning Type) 5.46 Sq.m Steel/aluminum Roll Up Door 28.74 Sq.m 100mm Chb Non Load Bearing (including Reinforcing Steel) 70.52 Sq.m Painting Works (masonry Painting) 15.96 Sq.m Painting Works (wood Painting) 45.41 Sq.m Painting Works (metal Painting) 1.00 L.s Electrical Works W-w-w-w-w-w-w-w-w-w-w-w-w-w-w-w