Fabrication Tenders

Description: Set Of Completed Pre-fabricated (in Two Part Lh & Rh) Sliding Door For Bcnhl Wagon To Rdso's Drg. No. Wd-11043-s-01, Item No.1 To 10, 12 To 19, 21 To 24 & 26 To 31, Alt. No.1 Including Rdso's Drg. No.wd-11043-s- 02, Item No.8,9,10 And 17, Alt. No.2. One Set Consisting 01 No. Lh Side Door And Rh Side Door Consisting Of Item No.1 To 10, 12 To 19, 21 To 24 & 26 To 31 Of Drg. No.wd-11043-s-01, Including Item No.8,9,10 And 17of Drg. No.wd-11043- S-02, Top Coping With Slider Channel And Guide Rail Assembled, Welded With Guide Angle And Ribs Etc.shall Be Supplied As Loose Items And Part Of Set.

Description: T/o 1 In 16 60 Kg , Rdso Drg. No. T-5691.(fabricated Switches [ Description - 11200mm O/r(curved) Fan Shaped Switch For 1 In 16 T/o For Bg 60 Kg (uic) On psc Sleepers To Rdso Drg. No. T/5692 Alt.03 As Per Irs Specification Irs:t-10- 2023 Complete With Stock Rails, Tongue Rails And All Parts With Fittings Including check Rails As Listed In The Rsdo Drawing But Excluding Liner, Elastic Rail Clip, fish Plate & Fish Bolts, & Psc Sleeper.] And Cms Xing Body [ Description - Cms crossing 1 In 16 Bg For 60 Kg Rails On Psc Sleepers As Per Rdso Drg.no. T/5693 (alt.02) Complete With Fittings Asper Specification No. Irs T-29(revised 2022). list Of Fittings To Be Supplied With Is Enclosed As Annexure-a.] )

Details: Description 6 Units Pre-fabricated Material Recovery Facility

Details: Description A. Improvement Of Day Care Center Nueva Fuerza, Carmen, Bohol Scope Of Works: Item 2. Earth Works 2.3. Gravel Bedding 1 1" Ø Gravel (approved Source) 0.75 Cu.m. Item 3. Concrete Works 3.1. Column Footings 2 Portland Cement 20.00 Bags 3 River Sand (approved Source), Leyte Source 1.00 Cu.m. 4 3/4" Gravel (approved Source), Black 2.00 Cu.m. 5 16mm. Dia. Def. Bars 13.00 Pcs. 6 #16 G.i. Tie Wire 1.00 Kg. 3.2. Concrete Columns (foundation To Second Floor Level) 7 Portland Cement 35.00 Bags 8 River Sand (approved Source), Leyte Source 1.75 Cu.m. 9 3/4" Gravel (approved Source), Black 3.50 Cu.m. 10 16mm. Dia. Def. Bars 48.00 Pcs. 11 10mm. Dia. Def. Bars 105.00 Pcs. 12 #16 G.i. Tie Wire 12.50 Kgs. Item 4. Formworks And Scaffoldings 13 20pcs.- 2" X 3" X 12' Good Lumber 120.00 Bd.ft. 14 42pcs.- 2" X 2" X 10' Good Lumber 140.00 Bd.ft. 15 1/2" Thk. Marine Plywood, 4' X 8' 10.00 Shts. 16 1/4" Thk. Marine Plywood, 4' X 8' 10.00 Shts. 17 #16 G.i. Tie Wire 3.00 Kgs. 18 Cwn # 2 1/2 5.00 Kgs. 19 Cwn # 3 10.00 Kgs. 20 Cwn # 4 15.00 Kgs. B. Improvement Of Barangay Stage La Victoria, Carmen, Bohol Scope Of Works: Item 1. Masonry & Steel Works 21 Sand (app. Source) 5.00 Cu.m. 22 Portland Cement 50.00 Bags 23 1 1/2" X 1 1/2" X 1/4" Thk. Angle Bar 20.00 Pcs. 24 1 1/2" X 1 1/2" X 3/16" Thk. Angle Bar 9.00 Pcs. 25 1" X 1" X 3/16" Thk. Angle Bar 28.00 Pcs. 26 2" X 3" X 1.2mm. C-purlins 12.00 Pcs. 27 Cut-off Disc 1.00 Pc. Item 2. Door Works 28 80cm X 210cm Wooden Solid Door With Door Jamb 4.00 Sets C. Improvement Of Barangay Hall Calatrava, Carmen, Bohol Scope Of Works: Item 1. Fabrication & Installation Of Glass Wall Partition 29 Fabrication & Installation Of Glass Wall Partition W/ 0.80m X 2.10m Swing Door Double Throw Using Aluminum Analok Panel, 1/4" Bronze Glass & Other Accessories, Total Area= 18.00 Sq.m. 1.00 Lot Item 2. Fabrication & Installation Of Stainless Railing 30 Fabrication & Installation Of Stainless Railing Using 2" Dia. Stainless Pipe, 1" Dia. Stainless Pipe Including Other Accessories, L- 13.35m, H-0.90m 1.00 Lot

Details: Title: Conception, Réalisation, Installation, Démontage Et Stockage (stand Et Autres Éléments) Pour Les Salons Et Opérations En Europe Et France Métropolitaine description: Accord Cadre Mono-attributaire À Bons De Commande Passé En Procédure D'appel D'offres Ouvert En Application Des Articles, R2124-2, R2162-2, R2162-4, R2162-13 Et R2162-14 Du Code De La Commande Publique. Le Marché Est Conclu Sans Minimum Et Avec Un Maximum De 1,2 Million Euro(s) Ht Par An. Achat Non Alloti : Le Non Allotissement Se Justifie Par La Nécessité Pour L'irt Et Le Prestataire Retenu D'optimiser Les Investissements Afin De Faire Des Économies En Termes De Fabrication Et D'achat. Le Coût De La Fabrication Pouvant Être Lissé Sur La Durée Du Marché. Le Non Allotissement Permettra D'une Part, D'avoir Une Meilleure Rentabilité Des Investissements (en Termes De Matériel, Mobilier Et Autres) Et De Limiter L'impact Énergétiques D'autre Part. Le Non Allotissement Permettra Donc De Conserver Une Cohérence Globale En Termes De Positionnement Stratégique, Ainsi Qu'une Maîtrise Des Coûts Et Budgets Qui Pourraient Être Augmentés En Raison D'une Pluralité D'interlocuteurs/prestataires. Date Prévisionnelle De Notification Du Marché : Mi-mars 2025

Details: Description:- Fabrication Of Insitu Glued Insulated Joints For 52kg./60kg. Rail To Rdso Drg. No.t/5361 During Day/night And Conforming To The Manual For glued Insulated Rail Joint 1998 Issued By Ministry Of Railways, Rdso/lucknow And In Accordance With The Process Sheet Of Eastern Railway, Plant depot/mughalsarai At 4.11.98 With Supply Of All Fittings And Accessories Such As - [a] 950mm Long Fish Plate Or As Per Rdso Drawing [b] Hts Bolts And Nuts [c] Purchased Washers [d] Insulating Bushes [e] Insulating Channels [f] 10mm Thick End Post [g] Araldite [h] Hardener [i] Glass Cloth Carrier With All materials & Fixtures For Cleaning And Assembling Excluding Rail. [work Has To Be Execute By Rdso Approved Firm] Note - 950 Mm Long Fish Plates And Hts bolts Should Be Got Inspected By Rites Before Supply And Fixing In Track. Special Conditions - 1. The Work Is To Be Completed Within (12) Twelve Months from The Date Of Issue Of Letter Of Acceptance. 2. No Break Up In Rates Will Be Accepted. 3. Indian Railways General Condition Of Contract And Standard specification 2020 Will Be Binding On The Contract. 4. Current Goods And Service Tax Registration Is To Be Submitted. 5. 950mm Long F/plates And Hts Bolts should Be Got Inspected By Rites Before Supply And Fixing In Track. 6. Only The Firms Having Rdso Approval In Manufacturing Glued Insulated Joints Can participate In This Tender. 7. Tenderer[s] Have To Submit Certificate Regarding Approved Firms Under Rdso For Manufacturing And Fabrication Of Glued Joints as Per Rdso Drawing No.t-5361/t-5843.

Details: National Book Trust, India Invites Bids On Central Public Procurement Portal (e-procurement) The Nbts One Stall 72 Sq. Mt. (775 Sq. Ft. Approx.) Will Be Fabricated / Constructed As Per The Design. Stall Has To Be Fabricated Under A Water Proof Sup

Details: Description Saving's Box (fabricated) 10 Piece Pass Book 600 Piece

Details: Description:- Fixing, Connection, Testing, Commissioning & Supply Of Led Highbay Luminaire 150w similar To Bajaj Electrical Duranto Product Code 169709 , Bghb 150w Led With Fin Ventilation technologyforbetterthermalmanagmentandwithcuttingedgeledtechnology(make-bajaj, philips, Surya,cromption & Havells) Above Fitting Should Be Fixed On Steel Structure Including Supply, fabrication Of Suitable Clamping Arrangement Made Of M.s Flat 25x3 Mm Size, With Supply Of Suitable bolts, Nuts, And Washers As Per The Site Requirement ( The Complete System Of Led Lights(including driver Etc) Shall Be Guaranteed For Satisfactorily Performance And Manufacturing Defects For Period of 60 Months From The Date Of Commissioning Or 72 Months From The Date Of Suppply, Whichever Is earlier.(reference: Railway Board's Letter No.2006/elect(g)/150/5 Dated 27.03.15).

Details: Description:- Supply,fabricationanderectionofsteelmemberstoreplaceexistingcorroded members Of Built Up Section Made Up Of Ms Plate, Angles, Channels Of Different Thickness And Sizes including Painting With One Coat Of Ready Mix Paint Zinc Chromate Priming To Is:104 Followed By One coat Of Ready Mix Paint Red-oxide Zinc Chrome Priming Paint To Is:2074. Structural Steel Should conform To Is:2062 E250- Grade'b0'. Fabrication And Erection To Be As Per Existing Design Initially By bolts And Nuts And Finally By Rivetting During The Sanctioned Traffic Block. Rate Includes Cutting Of New steel Work, Removal Of Rivets By Drilling, Dismantling Of Any Existing Members Required For Inserting fabricatedmembers,fixingofnewfabricatedbuiltupmemberswithalltools,plants,labour, consumables, Machinery And Accessories Etc. Work Will Be Executed As Per Irs:b 1-2001. Note: painting Shall Be Paid Extra Under Relevant Item.