Fabrication Tenders

Details: Description 1 Fabricated Office Table 6 Unit Four (4) Drawers Topglass, Fully Painted With Varnish Both Covers And With Lock Size: 124l X 78h X 61w 2 Swivel Office Chair (black With Headrest) 6 Unit * Storng Nylon Frame * Ultra Flexible 3d Ajdustable Armrests, Height Adjustable Lumbar Support, And Height & Angle Adjustable Headrest * Multi-function Mechanism With Back-recline And Tilt-lock Feature * 150 Kg Load Capacity 3 12 Doors Steel Locker Cabinet 3 Unit Material: Heavy Gauge Cold- Rolled Steel Plate Pre-treatment: Water Wash, Chemical Wash, Phosphating Finish: Durable Electrostatic Powder Coating Fittings: Index Holder, Keyed Camlock Or Padlock Latch Acessories: 24keys, Assembly Screw Color: Classic Grey Dimensions: Size: W-40cm, L-90cm, H-185cm Weight: 50kgs

Details: Description The Scope Of The Works Under This Contract Are The Project Billboard / Signboard; Occupational Safety And Health Program; Mobilization / Demobilization; Removal Of Structures And Obstruction; Structure Excavation (common Soil); Embankment From Roadway/structure Excavation (common Soil); Structural Concrete (3000 Psi, Class A, 28 Days); Reinforcing Steel (deformed), Grade 40; Formworks And Falseworks; Frames (jambs, Sills, Head, Transoms And Mullions); Doors (wood Panel); Fabricated Metal Roofing Accessory, Gauge 26 (0.551 Mm, Flashing); Pre-painted Metal Sheets (above 0.427 Mm, Rib Type, Long Span); Cement Plaster Finish; Painting Works (masonry/concrete); Painting Works (steel); Chb Non-load Bearing (including Reinforcing Steel), 100 Mm; Structural Steel; Metal Structure Accessories (bolts And Rods); Metal Structure Accessories (steel Plates); Structural Steel (trusses); Structural Steel (purlins); Solar Panel With Inverter, Battery And Other Devices.

Details: Description I. General Requirements A. Mobilization/demobilization B. Temporary Facilities C. Safety And Health D. Project Signboard Ii. Earthworks A. Structure Excavation B. Embankment From Borrow C. Gravel Fill D. Micro-piling Iii. Plain And Reinforced Concrete Works A. Structural Concrete (ready-mix, Class A, 28 Days) B. Reinforcing Steel, Grade 40 C. Formworks Iv. Finishes A. Masonry Works A.1. 100mm Chb Non-load Bearing Wall A.2. 150mm Chb Non-load Bearing Wall B. Fabricated Materials B.1. Door Frames B.2. Wood Panel Door B.3. Pvc Door B.4. Steel Gate & Metal Partition B.5. Jalousie Window B.6. 50mm Dia. G.i. Pipe Handrails Fully Welded On Vertical Railing On 19mm Square Bar C. Finishing Works C.1. Plain Cement Finish With Floor Hardener C.2. Plain Cement Plaster Finish C.3. Fiber Cement Board Ceiling On Metal Frame C.4. Reflective Insulation C.5. Glazed Tiles And Trims C.6. Unglazed Tiles And Trims D. Painting Works D.1. Masonry / Concrete Painting D.2. Wood Painting D.3. Metal Painting V. Structural Steel And Roofing A. Prepainted Metal Sheets, Long Span, (corrugated, 0.5mm Thk.) B. Fabricated Metal Roofing Accessory (flashing, 0.6mm Thk.) C. Structural Steel, Trusses D. Structural Steel, Purlin E. Metal Structure, Wide Flange F. Metal Structure, Angle Bar G. Metal Structure, Steel Deck Vi. Plumbing / Sanitary Works A. Sewer Line Works B. Cold Water Line Works C. Sanitary / Plumbing Fixtures D. Septic Vault "type E" Vii. Electrical Works A. Conduits, Boxes And Fittings B. Wires And Wiring Devices C. Panel Board D. Lighting Fixtures Viii. Site Development A. Concreting Works B. Reinforcing Steel, Grade 40 C. Formworks

Details: Description Item No. Item Description % Of Total Unit Quantity Part I Repair/rehabilitation Of Tb Dots Building 803(1)a Structure Excavation (common Soil) 0.23% Cu.m. 8.96 804(1)a Embankment From Structure Excavation 0.13% Cu.m. 4.69 804(4) Gravel Fill 0.38% Cu.m. 3.17 900(1)a1 Structural Concrete 3.64% Cu.m. 12.67 902(1)a Reinforcing Steel (deformed), Grade 40 5.07% Kg 1,767.36 903(2) Formworks And Falseworks 1.19% Sq.m. 47.88 1003(1)a1 Ceiling (4.5mm, Metal Frame, Fiber Cement Board) 6.62% Sq.m. 135.25 1014(1)b1 Prepainted Metal Sheet (corrugated, Long Span, Above 0.427 Mm. Thk.) 9.74% Sq.m. 149.45 1008(2) Aluminum Glass Windows 2.14% L.s. 1.00 1010(2)b Door (wood Panel) 0.92% Sq.m. 3.78 1027(1) Cement Plaster Finish 0.96% Sq.m. 11.49 1018(1) Glazed Tiles And Trims 7.28% Sq.m. 83.25 1047(1) Structural Steel 13.98% L.s. 1.00 1032(1)a Painting Works (masonry/concrete) 2.71% Sq.m. 447.85 1046(2)a1 Chb Non-load Bearing (including Reinforcing Steel), 100mm 3.38% Sq.m. 89.94 1100(10) Conduits, Boxes And Fittings (conduit Works/conduit Rough-in) 0.55% L.s. 1.00 1101(13) Wires And Wiring Devices 1.15% L.s. 1.00 1103(1) Lighting Fixtures And Lamps 0.48% L.s. 1.00 1011(1)a Roll-up Door, Steel 0.74% Set 1.00 Part Iii Repair/rehabilitation Of Health Office 803(1)a Structural Excavation (common Soil) 0.04% Cu.m. 1.42 900(1)a1 Structural Concrete 1.68% Cu.m. 5.84 1047(1) Structural Steel 4.99% L.s. 1.00 1014(1)b1 Prepainted Metal Sheet (corrugated, Long Span, Above 0.427 Mm. Thk.) 4.30% Sq.m. 66.00 Part Iv Repair/rehabilitation Of Health Office 1.0 Fabrication And Installation Of Railings 5.14% L.s. 1.00 2.0 Concreting Of Pathway 2.29% L.s. 1.00 3.0 Construction Of Washstand 1.10% L.s. 1.00 4.0 Repair Of Pwd Comfort Room 2.79% L.s. 1.00 5.0 Repair Of Doctor’s Office 3.88% L.s. 1.00 Part V Repair/rehabilitation Of Rhu Water System 1.0 Pressure Tank, Water Pump And Pe Pipes 4.07% L.s. 1.00 2.0 Construction Of Water Pump House 1.22% L.s. 1.00 Part Vii Installation Of Signages 1.0 Installation Of Signages 7.20% L.s. 1.00

Details: Title: Entraînements À Moteur description: Le Présent Appel D'offres A Pour Objet L'attribution D'un Marché Pour Des Entraînements À Moteur Pour 3 Ans Et 2 Options Pour Chacune Des 3 Années Supplémentaires. Dans Le Cadre De L'aménagement Et De L'entretien De L'infrastructure Ferroviaire, Les Cff Sa Prévoient D'acquérir Des Entraînements À Moteur Pour Actionner Les Commutateurs De La Caténaire. L'appel D'offres Comprend La Fabrication, Le Contrôle Et La Livraison Des Entraînements De Moteurs, Y Compris Les Éventuels Dispositifs De Montage Et D'adaptation Au Système Existant Aux Cff. L'appel D'offres Est Divisé En Trois Lots Comme Suit : Lot 1 : Entraînement Motorisé (version Standard Fs Cff) Il Faut S'attendre À Un Besoin Total D'environ 200-300 Pièces Par An. Le Marché Est Attribué Au Fournisseur Arrivé En Première Et Deuxième Position (dual Sourcing). La Sa Cff Se Réserve Le Droit De N'attribuer Le Marché Qu'à L'entreprise Classée Première, Dans La Mesure Où Le Prix De L'offre De L'entreprise Classée Deuxième Dépasse De Plus De 20% Le Prix De L'offre De L'entreprise Classée Première. Le Premier Fournit Environ 60% Des Besoins Totaux Et Le Deuxième Environ 40%. Les Cff Se Réservent Le Droit De Procéder À Des Adaptations, Car Les Besoins Exacts Sur Toute La Durée Du Contrat Ne Sont Pas Encore Connus. La Sa Cff Se Réserve Le Droit De N'inviter Que Les Soumissionnaires Répondant Aux Critères Et Ayant Des Chances D'être Retenus Pour La Mise À Disposition D'un Prototype À Tester Dans Les Ateliers Des Cff. Lot 2 : Entraînement Motorisé (articulation Inversée, Flexball) Il Faut S'attendre À Un Besoin Total D'environ 10 Pièces Par An. Le Marché Sera Attribué À L'adjudicataire Classé Premier Du Lot 1. Lot 3 : Remplacement De L'entraînement Par Moteur Spécial On Peut S'attendre À Un Besoin D'environ 5 Pièces Par An. L'entraînement Par Moteur Spécial Est Utilisé Pour Les Courses Plus Importantes De 300 À 400 Mm Sur Les Postes D'échafaudage Existants Avec Sectionneur De Commutation. Le Marché Est Attribué À Un Fournisseur. La Sa Cff Se Réserve Le Droit De N'inviter Que Les Soumissionnaires Répondant Aux Critères Et Ayant Des Chances D'être Retenus Pour La Mise À Disposition D'un Prototype À Tester Dans Les Ateliers Des Cff. Les Offres Peuvent Être Soumises Pour : - Lot 1 Et 2 - Lot 1, 2 Et 3 - Lot 3 Les Quantités Mentionnées Sont Fournies À Titre Indicatif Et Permettront L’évaluation Des Offres. L’entreprise Ne Peut Pas Prétendre À Un Volume De Livraison Défini.

Details: Description 1. 2 Unit 400 Watts Heavy Duty Solar Street Lights (new) Control Mode: Light Control Plus Remote Solar Panel Size: 670*25mm Solar Panel: Pollysilicon (6v/45w) Battery 52000mah Lithium Iron Acid Battery Smd Lamp Beads: 110 Bright 5054 Lamp Body Size: 621*270*90mm Materials: Die-casting Aluminum+optical Lens Waterproof Grade: Ip65 Charging Method, Time: Solar Charging About 6 Hrs Use Time: 12-15 Hour 7m G.i. Pipe Epoxy Painted Concrete Pedestal Including Earthwork, Electrical Work And Scaffolding 2. 8 Unit 400 Watts Heavy Duty Solar Street Lights (replacement) Control Mode: Light Control Plus Remote Solar Panel Size: 670*445*25mm Solar Panel: Polysilicon (6v/45w) Battery: 52000mah Lithium Iron Acid Battery Smd Lamp Beads: 110 Bright 5054 Lamp Body Size: 621*270*90mm Materials: Die-casting Aluminum+optical Lens Waterproof Grade: Ip65 Charging Method, Time: Solar Charging About 6 Hrs Use Time: 12-15 Hour Including Electrical Works And Scaffolding 3. 5 Unit 600 Watts Integrated Solar Street Light (double Light And Arms) Control Mode: Light Control Plus Remote Solar Panel Size: 1500*375mm Solar Panel: Mono Crystalline (5v/90w) Battery: 91000mah Lithium Iron Phosphate Battery Smd Lamp Beads: 348 Bright 5054 Lamp Body Size: 1500*373*55mm Materials: Aviation Aluminum+optical Lens Waterproof Grade: Ip65 Charging Method, Time: Solar Charging About 6 Hrs Use Time: 12-16 Hour 4" Dia. X 7m G.i. Pipe Epoxy Painted Reinforced Concrete Pedestal Including Earthworks, Electrical Works And Scaffolding 3 Units At Plaza/center Island, 4 Units At Fish Landing 4. 2 Unit 300 Watts Ufo Garden Lights Control Mode: Light Control, Induction Plus Remote- Solar Panel: Polysilicon (6v/20w)-battery: 26000 Mah/lithium Iron Phospate Battery Smd Lamp Beads: Sanan Chip 642 28355md Lamp Body Size: 572*572*123mm Materials: Plastic Abs-waterproof Grade:ip65 About 6 Hours Including Electrical Works,fabrication And Scaffolding Purpose: For The Installation Of Led Solar Lighting System, Lgu- Jose Dalman, Zamboanga Del Norte. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1. Issuance Of Bid Documents: 11/22/2024 To 12/02/2024 2. Pre-bid Conference: 3. Submission Of Letters Of Intent And Application For Eligi- Bility ( If Single Stage Bidding Is Used, Delete This Activity) 4. Opening Of Bids: December 02, 2024 @ Municipal Budget Office 10:00am,jose Dalman Zdn 5 Bid Evaluation: Tuesday, December 3, 2024 6. Post-qualification Wednesday, December 4, 2024 7. Notice Of Award: Thursday, December 5, 2024 8. Contract Preparation And Signing: Friday, December 6, 2024 9. Approval By Higher Authority: Monday, December 9, 2024 10. Issuance Of Notice To Proceed: Tuesday, December 10, 2024

Details: Description Item No. Description Unit Qty B.5 Project Billboard/sign Board Ea 1.00 B.7 Occupational Safety And Health Program Lot 1.00 803(1)a Structure Excavation (common Soil) - Manual Cu.m 16.40 900(1 )c4 Structural Concrete, Class A - 28 Days Cu.m 11.42 902(1)a Reinforcing Steel Of R.c. Structures, Grade 40 Kg 937.32 903(2) Formworks And Falseworks Sq.m. 64.80 1046(2)a1 100mm Chb Non Load Bearing (including Reinf. Steel) Sq.m. 129.24 1003(9) Carpentry Works Bd.ft. 3,436.00 1013(1) Corrugated Metal Roofing Sq.m. 510.63 1013(2) Fabricated Metal Roofing Accessories (ridge Roll) M 27.00 Spl-1 Heater Set 6.00 Spl-2 Flue Tube Set 6.00

Details: Description Project Billboard/signboard; Occupational Safety And Health; Mobilization/demobilization; Removal Of Structures And Obstruction; Structure Excavation, Common Soil; Structural Concrete, Class A, 28 Days; Reinforcing Steel (deformed), Grade 40; Formworks And Falseworks; Plumbing Works; Ceiling, 4.5 Mm, Metal Frame, Fiber Cement Board; Finishing Hardware; Aluminum Glass Windows, Awning Type; Frames, Jambs, Sills, Head, Transoms And Mullions; Doors Wood Panel; Fabricated Metal Roofing Accessory, Gauge 26 (0.551mm), Flashing; Pre-painted Metal Sheets, Above 0.427mm, Corrugated, Long Span; Glazed Tiles And Trims; Unglazed Tiles; Cement Plaster Finish; Painting Works, Steel; Pvc Doors And Frames; Chb Non-load Bearing (including Reinforcing Steel), 100 Mm; Chb Non-load Bearing (including Reinforcing Steel), 150 Mm; Structural Steel; Railing; Conduits, Boxes & Fittings (conduit Works/conduit Rough-in); Wires And Wiring Devices; Panelboard With Main & Branch Breakers; Lighting Fixtures

Details: Description:- Design, Manufacturing And Supply Of Pot- Ptfe Bearing Of 370mt Capacity, Consisting of A Metal Piston Supported By A Disc Or Un Reinforced Elastomeric Confined Within A Metal Cylinder, sealing Rings, Dust Seals, Ptfe Surface Sliding Against Stainless Steelmating Surface, Complete assembly To Be Of Cast Steel / Fabricated Structural Steel, Metal And Elastomeric Elements Complete As per Is:2062, Is:1030, Aisi:304, Aisi:316, Is:6911, Bs:3784, Is:3400, Is:226, Is-1367, Bs-5400,bridge code And As Per Approved Drawing And Technical Specifications. Test Report After Inspection Of The bearings Shall Be Submitted By Firm/manufactures And Got Approved Before The Materials Are Lifted from The Manufacturer Premises For Free Pot Cum Ptfe Guided (l) Bearing. Note: (1) Pot-ptfe bearing Should Be Supply As Per Approved Drawing No. Cao/c/d/rc/31-2006 (2) Work Should Be carried Out Under Traffic Block In Service Girder.

Details: The Intended Acquisition Will Result In Award Of Dbb Construction Of An Aviation Storage Facility For Use By U.s. Forces Located At Soto Cano Air Base. The New Fuel Storage Facility Will Provide A Minimum Of 300,000 Gallons Of Fuel Storage. Three Nominally 100,000-gallon Factory Fabricated Storage Tanks Will Be Provided To Meet This Requirement. The Three Storage Tanks Will Be Placed On A Curbed Foundation Slab For Containment Of Small Drips And Spills. The System Will Be Provided With Two (2) Commercial Truck Offload Skids To Provide System Redundancy As Well As An Increased Rate Of Fuel Receipt. Each Of The Commercial Offload Skids Will Be Capable Of Offloading At A Rate Of 600 Gpm. The New Fuel System Will Have Two (2) Truck Fillstands, Each Capable Of Issuing Fuel At A Rate Of 600 Gpm. The New System Will Require A Pol Ops Building Equipped With A Fuel Laboratory Meeting C++ Sizing Requirement As Outlined In Ufc 4-310-03. The North American Industry Classification System (naics) Code For This Project Is 236220.