Electrical Work Tenders

Description: Electrical Work For Energy Efficiency & Green Energy Work Over Varanasi Division.

Description: Electrical Work For New Chemical Building Under Emoph Department, Sgtpp.

Description: Electrical Work In Connection With "manikpur : Replacement Of 8 Nos.type - I Staff qtrs With 6 Nos Type Iii & 2 Nos Type -iv Quarters At Mkp Station. Electrical Work In connection With "interlocking Of 02 Gates No.19c(sww-jsc),33c(jsc-kww) In Brn- eth Sections Of Prayagraj Division. Electrical Work In Connection With "design, supply, Installation And Commissioning Of Automatic Coach Washing Plant At subedarganj.

Details: Construction of Kadwal Tank (Without Canal) across local Kadwal River Teh. Karahal Dist. Sheopur (M.P.) to live storage 1.580 M.cum of water to irrigate 315 Hectares land comprising of preparation of Construction drawings & design, obtaining approval of all construction drawings & design from the competent authority including construction of all civil, mechanical, and electrical works involved in the construction of Dam. The work includes survey of Head Work and Submergence with Fixing of Chainage cum Boundary Stone, geological investigations, preparation, and submission of complete Land Acquisition (LA) cases to competent authority for land acquisition of dam seat and submergence area and perusing LA cases for award, forest clearance, and all other clearances which are required for dam construction. All structures coming under submergence i.e. culverts, bridges, roads etc., all works including river training and construction of coffer dam, any other work as directed by the Engineer-in-Charge as per details given in scope of work. area including preparation and submission of Land Acquisition cases to competent authority for land acquisition of dam seat and submergence area and perusing LA cases for award, Forest clearance and any other clearance from competent authority on Turnkey basis as per detailed scope of work but not limited to that.

Description: Electrical Work Regarding Provision Of Centralized Control And Command Center (c-4 ) At Brsq Railway Station .

Description: Electrical Work In Connection With (a) Provision Of Deep Tube Well, Pipeline Connection To Staff Qtrs With Pvc Tank For Each Quarter At Gmx Under Aden/rnq (b) Provision Of Deep Tube Well, Pipeline Connection To Staff Qtrs With Pvc Tank For Each Quarter At Slbn Under Aden/rnq (c Provision Of Deep Tube Well, Pipeline Connection To Staff Qtrs With Pvc Tank For Each Quarter At Mwf Under Aden/cpu (d) Provision Of Deep Tube Well, Pipeline Connection To Staff Qtrs With Pvc Tank For Each Quarter At Ppkd Under Aden/cpu (e) Dhn:- Obra & Kqr- Replacement Of 4 Units Type-ii Staff Qtrs. At Obra & 8 Units Ty-ii Qrts. At Kqr By Type-iii Staff Quarters On Replacement Account.

Description: Amc For Civil And Electrical Works For Office Building And Staff Quarters At Kolkata

Description: Electrical Work In Connection With (a) Electronic Interlocking In Place Of Pi At Pka, Tet & Dlw Station (b) Provision Of Power Supply To Private Electronic In-motion Weighbridge On Railway Land In Line No. 10 At Ksnt Siding At Khalari Station(c) Multi Section Digital Axle Counter (msdac) In Mahadiya (mhda) Yard Under Dhanbad Division.(d) Proposal For Installation Of Railway Owned Electronic In Motion Weighbridge At Katkamsandi (kkas) Station(e) Supply Installation & Commissioning Of Pitless Electronics In Bridge Motion Railway Weigh Bridge(eimwb) For Kumh In Dhanbad Division, Qty-01 Nos.

Description: Electrical Work In Connection With (a) Dhn:- Provision Of 10 Bedded Ladies Rpf Escort Barracks For Lady Train Escorting Staff At Dhanbad. (b) Provision Of 04 Bedded Rpf Barrack At Road Side Station Mhda, Krlr, Anpr, Sktn, Jgf, Dxn, Wdm & Mxy Under Sr.den/4/dhn. (c) Provision Of Rpf Out Post Office At Renukoot & Singrauli Under Sr.den/4/dhn (d) Barwadih Extension Of Trolley Repair Shed And Other Improvement Works At Freight Depot Brwd

Details: Description Invitation To Bid For The Calibration, Function Test, Preventive Maintenance, General Check-up, Verification, And Parts Installation Of Various Laboratory Equipment – 6 Lots The Philippine Fiber Industry Development Authority Through The General Appropriations Act Fy 2025 Intends To Apply The Sum Of One Million Seven Hundred Seventy-five Thousand Pesos (php1,775,000.00) Being The Abc To Payments Under The Contract For The “invitation To Bid For The Calibration, Function Test, Preventive Maintenance, General Check-up, Verification, And Parts Installation Of Various Laboratory Equipment – 6 Lots” With Project Identification No. Pb-05-2025. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Philippine Fiber Industry Development Authority Through The General Appropriations Act Fy 2025 Intends To Apply The Sum Of: Lot No. 1: General Check-up, Preventive Maintenance Of Molecular Biology Laboratory Equipment – 6 Units - Php30,000.00 Lot No. 2: General Check-up, Preventive Maintenance, Verification, Parts Installation And Testing Of Labconco Lypholizer Freeze Dryer - 2 Units - Php103,000.00 Lot No. 3: General Check-up, Preventive Maintenance, Verification, Parts Installation And Testing Of Thermo Scientific Smart2pure Pro Water Purification System Parts – 1 Unit - Php107,000.00 Lot No. 4: Preventive Maintenance And Function Test Of Injection Molding Machine – 1 Unit - Php410,000.00 Lot No. 5: Preventive Maintenance And Function Test Of Digester – 1 Unit - Php525,000.00 Lot No. 6: Calibration And Function Test Of Pulp And Paper Equipment – 8 Units - Php600,000.00 Total: Php1,775,000.00 The Philippine Fiber Industry Development Authority Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By And Shall Be In Accordance With The Delivery Schedule Under Section Vi. Schedule Of Requirements. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From Philfida And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents Can Be Accessed Online Starting June 14, 2025 (saturday) And The Hard Copy Can Be Purchased By Interested Bidders Starting June 16, 2025 (monday) From The Given Address And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of: Lot No. 1: General Check-up, Preventive Maintenance Of Molecular Biology Laboratory Equipment - 6 Units - Php100.00 Lot No. 2: General Check-up, Preventive Maintenance, Verification, Parts Installation And Testing Of Labconco Lypholizer Freeze Dryer - 2 Units - Php100.00 Lot No. 3: General Check-up, Preventive Maintenance, Verification, Parts Installation And Testing Thermo Scientific Smart2pure Pro Water Purification System Parts – 1 Unit - Php100.00 Lot No. 4: Preventive Maintenance And Function Test Of Injection Molding Machine – 1 Unit - Php410.00 Lot No. 5: Preventive Maintenance And Function Test Of Digester – 1 Unit - Php525.00 Lot No. 6: Calibration And Function Test Of Pulp And Paper Equipment – 1 Unit - Php600.00 Total: Php1,835.00 The Philfida Will Hold A Pre-bid Conference On June 23, 2025 (monday) At 1:30 P.m. Through Video Conferencing Via Microsoft Office 365 Teams Which Shall Be Open To Prospective Bidders. Bidder/s Should Submit A Valid Email Address One (1) Day Before The Pre-bid Conference. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At Philfida’s Fiber Processing And Utilization Laboratory, Bai Compound, Visayas Ave., Brgy. Vasra, Quezon City On Or Before July 9, 2025 (wednesday) At 9:00 A.m. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On July 9, 2025 (wednesday) At 10:00 A.m. At Philfida’s Fiber Processing And Utilization Laboratory: Bai Compound, Visayas Avenue, Brgy. Vasra, Quezon City To Be Streamed Live Via Ms Office 365 Teams, The Link Of Which Is Available By Request. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Bidders May Opt To Attend Virtually. The Bidders Shall Drop Three (3) Copies Of Their Duly Accomplished Eligibility Requirement, Technical And Financial Proposals In Two (2) Separate Sealed Envelopes In The Bid Box Located At Philfida’s Fiber Processing And Utilization Laboratory: Bai Compound, Visayas Avenue, Quezon City. Interested Bidders Are Requested To Contact The Bac Secretariat At Nos.: (02) 8531-7854; 09189402419 (victor Y. Romano) And 09185765899 (clarissa T. Aquino) Before Submitting The Bidding Documents. Technical Specifications: Lot 1 General Check-up, Preventive Maintenance Of Molecular Biology Laboratory Equipment – 6 Units Technical Specifications: • Units: 1. Sartorious Top Loading Balance S/n: 337911298 – 1 Unit 2. Labnet Deluxe Problot Rocker 35 Rocking Platform S/n: 16090482 – 1 Unit 3. Cole-palmer 105eca-lvd Gel Electrophoresis With Voltage Regulator S/n: 14e220636-2a – 2 Units 4. Precisa Analytical Balance S/n: 0505279 – 1 Unit 5. Simpliamp Thermal Cycler P/n: Pfida-17-236-1114 – 1 Unit • Scope Of Works: 1. Perform Inspection On Test Of External And Accessible Internal Component Parts And Its Proper Operation In The System And Prevent For Breakdowns Or Failures; 2. Performs Corrective Maintenance And Making Any Minor Repair And Adjustment On The Spot To Bring The Unit To Good Operational Condition And Safe Use Device; 3. Cleaning Of External And Accessible Internal Parts; 4. 1 Set Point Temperature Calibration, Preventive Maintenance Service And Load Cell Verification; 5. Provision Of Service Report And Preventive Maintenance Service/ Calibration Certificate. • Inclusive On-site Service Charge: 1. Mobilization Charge Of One (1) Service Support Personnel Who Will Perform The Preventive Maintenance Service At Pfida, Quezon City. 2. On-site Service Charge Valid For 1 Working Day. • Delivery Period: Seven (7) Calendar Days Upon Receipt Of The Ntp • Delivery Site: Philippine Fiber Industry Development Authority – Immunology And Molecular Biology Laboratory, Bai Compound, Visayas Ave., Brgy. Vasra, Quezon City Lot 2 General Check-up, Preventive Maintenance, Verification, Parts Installation And Testing Of Two (2) Units Labconco Lyophilizer Freeze Dryer – 2 Units Technical Specifications: As Reflected In Service Completion Report M24.02690 And M24.02689 • Unit Serial Nos.: 150812475j And 190170020b • Parts Should Include: Labconco 1l Vacuum Pump Oil – S, 1 Pc • Note: Suppliers Should Be An Authorized Distributor Of Labconco Equipment Parts In The Philippines • Delivery Period: Seven (7) Calendar Days Upon Receipt Of The Ntp • Provision Of Service Report And Preventive Maintenance Service/ Calibration Certificate. • Delivery Site: Philippine Fiber Industry Development Authority – Immunology And Molecular Biology Laboratory, Bai Compound, Visayas Ave., Brgy. Vasra, Quezon City Lot 3 General Check-up, Preventive Maintenance, Verification, Parts Installation And Testing Of Thermo Scientific Smart2pure Pro Water Purification System Parts – 1 Unit Technical Specifications: As Reflected In Service Completion Report M23.02991 • Serial No.: 1602104002990 • Parts Should Include The Ff: 1. Reverse Osmosis Cartridge (cat # 50157608) – 1 Piece 2. Polishing Cartridge (cat # 09.1020) - 1 Piece 3. Filter 0.1 Micron (cat # 50157375) - 1 Piece Note: Suppliers Should Be An Authorized Distributor And Service Provider Of Thermo Scientific Equipment In The Philippines. • Delivery Period: Seven (7) Calendar Days Upon Receipt Of The Ntp • Provision Of Service Report And Preventive Maintenance Service/ Calibration Certificate. • Delivery Site: Philippine Fiber Industry Development Authority – Immunology And Molecular Biology Laboratory, Bai Compound, Visayas Ave., Brgy. Vasra, Quezon City Lot 4 Preventive Maintenance And Function Test Of Injection Molding Machine – 1 Unit Technical Specifications: • Model: Fcs Ht-250sv • Serial No. 66100013 • Property No. Pfida-17-236-1008 • Scope Of Works: A. Electrical: 1. Cleaning And Checking Of Thermocouples; 2. Cleaning And Checking Of Heaters And Heater Wires; 3. Bolt Tightening Of Ground Cable; 4. Electrical Component, Terminal Bolt Tightening; 5. Cleaning Of Control Panel; 6. General Cleaning Of Motor; 7. Insulation Checking, Use Insulation Merger To Measure Wires/cable Insulation; B. Hydraulic 1. Checking Oil Leaks At Cylinders; 2. Checking Oil Lubrication, Joint, Connector Leaks; 3. Clean The Residual Waste Oil; 4. Checking High Pressure Filter, Suction Filter For Replacement; 5. Heat Exchanger Cleaning; 6. Test Oil Lubrication; 7. Check Water Supply Manifold And Valves; 8. Change Oil; 9. Check Pressure Gauges. C. Mechanical 1. Screw And Nuts Are Properly Tightened; 2. Machine Clean And Neat Status; 3. Lubricate Slide-way, Movable Platten, Tightening Of Screw Loosen; 4. Lubricate Hydraulic Motor Slide-way; 5. Replace Worn-out Movable Parts. D. Others 1. Checking The Ventilation System And Cleaning; 2. Replace Mold Rubber Hose And Hose Clamps; 3. Pull Down Injection Mold For Preventive Maintenance And Cleaning; 4. Remount Mold Onto Machine After Preventive Maintenance Service Of Mold. • Note: 1. All Consumable Materials And Tools Should Be At The External Provider’s Expense; 2. External Provider Must Be Existing In The Philippine Market At Least Ten (10) Years; 3. External Provider Must Submit Certifications Of Their Engineers Or Technicians, Confirming That They Are Qualified To Perform Calibration And Preventive Maintenance Of The Twin-screw Extruder. • Delivery Period: Thirty (30) Calendar Days Upon Receipt Of The Ntp • Provision Of Service Report And Preventive Maintenance Service/ Calibration Certificate. • Delivery Site: Philippine Fiber Industry Development Authority – Fiber Processing And Utilization Laboratory, Bai Compound, Visayas Ave., Brgy. Vasra, Quezon City Lot 5 Preventive Maintenance And Function Test Of Digester – 1 Unit Technical Specifications: • Model: Crs Digester Autoclave Oven 3.0 • Serial No.: 1194 • Property No.: Pfida-19-236-1406 • Scope Of Works: A. General 1. General Service And Checking Hardware; 2. Replacement Of Autoclave Temperature Sensors; 3. Cleaning, Checking And Maintenance Of Electrical Wirings And Devices; 4. Cleaning Of Exhaust Fans And Vapor Steam Outlets; 5. Replacement Of Rubber Tubes Of Air & Water Lines; 6. Complete Cleaning Of Digester Oven Body, Its Components And Accessories; 7. Provision Of Electric Impact Wrench, Cordless And Portable With Battery, With 30mm Socket And 17mm Extension Socket; 8. Provision Of 1 Set Of Standard Spare Parts And Personal Protective Equipment; 9. Provision Of Acrylic Coverings Of Electric Motor, Heater And Valve Connections; 10. Cleaning Of All Autoclaves And Tray (removing Of Dirt And Stains); 11. Replacement Of 0-rings Of All Autoclaves; 12. Removal Of Existing Water Pump And Its Pressure Tank And Piping. B. Others 1. Control Software Upgrade To The Latest Version; 2. Tuning / Calibration Training; 3. Provision Of Meals During Training; 4. Includes Transportation And Accommodation Of A Foreign Engineer. • Note 1. All Consumable Materials And Tools Should Be At The External Provider’s Expense; 2. External Provider Must Be Existing In The Philippine Market At Least Ten (10) Years; 3. External Provider Must Submit Certifications Of Their Engineers Or Technicians, Confirming That They Are Qualified To Perform Calibration And Preventive Maintenance Of The Crs Digester Auto Clave Oven; • Delivery Period: Thirty (30) Calendar Days Upon Receipt Of The Ntp • Provision Of Service Report And Preventive Maintenance Service/ Calibration Certificate. • Delivery Site: Philippine Fiber Industry Development Authority – Fiber Processing And Utilization Laboratory, Bai Compound, Visayas Ave., Brgy. Vasra, Quezon City Lot 6 Calibration And Function Test Of Pulp And Paper Equipment – 8 Units Technical Specifications: • Instruments For Calibration: 1. L&w Canadian Standard Freeness Model: Se30 Sn#895 Property No. Undp-89-819-29 2. L&w Micrometer Model: Se051d20 Sn#5799 Property No. Undp-89-819-21 3. L&w Densometer Model: Se 121d Sn#2212 Property No. Undp-91-819-49 • Instruments For Function Test 1. L&w Tear Tester Model: Se009a Sn#2449 Property No. Undp-89-819-24 2. L&w Wet Disintegrator (noram) Model: Ca371 Sn#8901105 Property No. Undp-89-819-28 3. L&w Rapid Dryer Model: Se257 Sn#777 Property No. Fida-99-819-278 4. L&w Circular Cutter Model: Se123 Sn#088 Property No. Undp-90-819-39 5. L&w Ect Cutter Model: Se008 Sn#1280 Property No. Undp-89-819-19 • Note: 1. All Consumable Materials And Tools Should Be At The External Provider’s Expense; 2. External Provider Must Be Existing In The Philippine Market At Least Five (5) Years; 3. External Provider Must Have At Least 5 Years Of Experience In Performing Preventive Maintenance On The Equipment; 4. The External Provider Must Be Authorized By The Manufacturer • Delivery Period: Thirty (30) Calendar Days Upon Receipt Of The Ntp • Provision Of Certificate Of Calibration And Function Test. • Provision Of Copy Of Reference Standards • Delivery Site: Philippine Fiber Industry Development Authority – Fiber Processing And Utilization Laboratory, Bai Compound, Visayas Ave., Brgy. Vasra, Quezon City