Electrical Tenders

Details: Description Items & Description Qty Unit Sign Pen, Extra Fine Tip, Black 10 Piece Sign Pen, Extra Fine Tip, Blue 10 Piece Battery, Dry Cell, Aa, 1.5 Volts, Alkaline 12 Pack Battery, Dry Cell, Aaa, 1.5 Volts, Alkaline 15 Pack Cleaner,toilet Bowl And Urinal, 900ml-1000ml Cap 60 Bottle Detergent Powder, All Purpose, One(1) Kg 60 Pouch Disinfectant Spray, Aerosol Type, 400-550 Grams 5 Can Philippine National Flag, 100% Polyester 2 Piece Tape, Electrical, 18mm X 16m Min 6 Roll Tape, Masking, Width: 48mm (±1mm) 12 Roll Tape, Transparent, Width: 48mm (±1mm) 12 Roll Data File Box, Made Of Chipboard, With Closed Ends 24 Box Fastener, Metal, 70mm Between Prongs 3 Box Paper Clip, Vinyl/plastic Coat, Length: 32mm Min 12 Box Puncher, Paper, Heavy Duty, With Two Hole Guide 2 Piece Tape Dispenser, Table Top, For 24mm Width Tape 3 Piece Note Pad, Stick On, 50mm X 50mm (2" X 2") Min 5 Cube Dry Seal 1 Piece Rubber Stamp (recieved, Name Of School Head, Senior Bookkeeper, Registrar, 3 Administrative Assistant, Assistant Principal, Bac Chairman, Property Custodian, Administrative Officer Ii, Guidance Councilor And Release) 13 Piece Ink For Printer, D60, Black 12 Bottle Ink For Printer, D60, Magenta 6 Bottle Ink For Printer, D60, Cyan 6 Bottle Ink For Printer, D60, Yellow 6 Bottle Ink For Printer, 004, Black 12 Bottle Laminating Film, 125 Mic 80mmx110mm 15 Box Vellum Board, 100 Sheets 15 Pack Dressmaker Pin 20 Pack Cloth, For Leis, Ethnic Design, 2 Inch 2 Roll Thumbtacks 20 Box Thumbtacks 20 Box All Purpose, Flour 10 Kilo Cooking Oil 3 Bottle Margarine 2 Kilo Cocoa Powder 5 Kilo Cornstarch 5 Kilo Sugar, Brown 5 Kilo Sugar, White 10 Kilo Powdered Sugar 5 Kilo Vanilla 2 Bottle Baking Powder 1 Kilo Baking Soda 1 Kilo Yeast 1 Kilo Food Coloring, Assorted 4 Bottle Protective Salon Gloves 2 Boxes Hair Color, Brown 1 Pack Hair Color, Black 1 Pack Hair Color, Blond 1 Pack Hair Color, Red Wine 1 Pack Hair Conditioner 1 Liter Developer 6/9/12 1 Pack Bleaching Powder 1 Pack Cold Wave Lotion 2 Bottle Hair Treatment 2 Bottle Hair Straightening 1 Pack Wide Towels For Hair And Spa, Big 3 Piece Salon Towels For Neck, Small 5 Piece Hair Scissor 1 Set Massage Oil 1 Liter Salon Cape 3 Piece Applicator Bottle 3 Piece Bed Sheet, White 2 Piece Preparation Table 1 Unit Massage Bed 1 Unit Portable Table 1 Piece Executive Chair 2 Piece Electric Fan, Industrial, Ground Type, Metal Blade 5 Unit Wireless Wifi Network Router, 300mbps 7 Unit Lan Cable With Rj 45 Crimped, 100 Meters 5 Piece 8 Port Gigabit Switch Rj45 Ethernet Switch, Port Hub 2 Unit Blower 1 Unit Blood Pressure Monitor 1 Unit

Description: Contract 21 - Planned Electrical Works 2025-2027

Description: Delivery of Net Active Electrical Energy by a Contractor, Coordinator of a Standard Balancing Group, for Low and Medium Voltage with Full Administration of the Information Flow with ESO and Assumption of the Costs for Imbalances for Facilities of the Municipality of Chiprovtsi

Details: Description Lot 1- ₱ 795,950.00 A. Galvanized Iron (gi) Fittings, Brass Gatevalves & Ballvalves 500 Pcs.- Gi Bushing 3/4” X ½” 300 Pcs.- Gi Bushing 1” X ½” 500 Pcs.- Gi Elbow 3/4” X 90 500 Pcs.- Gi Elbow 1 /2”x 90 200 Pcs.- Gi St. Elbow 1” 200 Pcs.- Gi Nipple 1/2” X 12” 500 Pcs.- Gi Nipple 1/2” X 6” 500 Pcs.- Gi Nipple 1/2” X 2” 500 Pcs.- Gi Nut & Bolt 1/2” X 2 ½” 500 Pcs.- Gi Nut & Bolt 5/8 X 2 1/2” 100 Pcs.- Gi Nut & Bolt 5/16 X 2" 300 Pcs.- Gi Tee 1” 500 Pcs.- Gi Tee ½” 500 Pcs.- Brass Ball Valve 1/2” With Lockwing 10 Pcs.- Brass Gate Valve 1” Specification: - Pipes Shall Conform To The Requirements Of The Astm A53/a53m(standard Specification For Pipe, Black And Hot-dipped, Zinc-coated, Welded And Seamless) Or The Latest Revision Or Its Equivalent And Shall Be Schedule 40. - The Pipe Fittings Shall Conform To The Requirements Of Asme/ansi B16.3( Malleable Iron Threaded Fittings Class 150 And 300) Requirements Shall Be Class 150. - The Pipe Shall Be Practically Straight And Both Ends Of The Pipe Shall Be At Right Angle To The Axis Of The Pipe. The Inside And Outside Surfaces Of The Pipe Shall Be Free From Injurious Defects. - The Pipe And Fitting Threads Shall Be Made According To American Standard Pipe Taper Threader 9npt) With Taper Angle Equal To 1⁰ 47´ - Pipes And Fittings Shall Be Coated With Zinc, Both Inside And Outside Surfaces, In Accordance To Astm A153/a153m-05 (standard Specification For Zinc Coating (hot-dip) On Iron And Steel Hardware) - Valve Shall Be Conforming To Standard For Valve Asme B16.34 - Brass Valves Shall Be Full Port- Screwed-in Bonnet And Non-rising Stem - The Valve Body, Bonnet And Solid Wedge Disc Shall Be Brass Conforming To Astm B584 Alloy C84400-1996 Or The Latest Revision Or Its Equivalent. The Minimum Pressure Rating Shall Be 125psi Saturated Steam Pressure And 200 Psi Non-shock , Oil Or Gas. - Valve Shall Be Threaded End Conforming To Asme B1.20.1 (npt) B. Construction Materials 200 Pcs.- Hacksaw Blade Heavy Duty 100 Bags.- Premium Cement 100 Pcs.- Electrical Tape Big 100 Pcs.- Light Bulb 15 Watts 100 Kgs.- Cutting Disc 4" 20 Pcs.- Paint Brush 2" 100 Kgs.- Welding Electrodes E6013, 3mm 50 Kgs.- Deformed Steel Bar 9mm 50 Kgs.- Deformed Steel Bar 10mm 50 Kgs.- Deformed Steel Bar 12mm 50 Kgs.- Angle Bar 1/4 X 1-1 /2” Std 50 Kgs.- Angle Bar 1/4 X 1” Std 50 Kgs.- Angle Bar 1/4 X2” Std C. Ptfe Thread Seal Tape 500 Pcs.- Teflon Tape 3/4 (12mm) 300 Pcs.- Teflon Tape 1/2( 12mm) Specification: - Material: Ptfe (poly Tetra Fluoroethylene) - Width: 12 Mm - Length: 10 Meters - Depth: 0.075 Mm - Density: 0.4g/cm³ - Color: White Tape Product Must Comply To Following Requirements: - Heat-resistance: +370°c - Cold-resistance:-190°c - Tensile Strenght: ≥8mpa - Percentage Elongation: >=25% High Pressure Resistance: 150-200kg/cm² Lot 2- ₱ 1,084,400.00 A. Poly Compression Fittings 300 Pcs.- Plastic Adaptor 1/2" 500 Pcs.- Plastic Union Coupling ½” 100 Pcs.- Plastic Saddle Clamp 2”x ¾ 20 Pcs.- Plastic Saddle Clamp 8” X 2” Specification: - Working Pressure: Pn16 - Standard: Bs5114, As4020 Polyethlylene Pipe Pe80 & Pe100 Iso 4427, Ms1058 Material: - Body: Polypropylene - Nut: Polypropylene - Holder: Polypropylene - Clinching Ring: Acetal - O Ring: Nitrile Butadiene Rubber B. Unplasticized Polyvinyl Chloride (upvc) 100 Pcs.- Upvc Pipe 4x6 Mtrs. (100mm) Specification: - Nominal Outside Diameter, 110 Mm - Diameter Tolerance, 110.40 Mm - Minimum Wall Thickness, 6.3 Mm - Minimum Socket Depth, Not Less Than 114 Mm 100 Pcs.- Upvc Pipe 3x6 Specification: - Nominal Outside Diameter, 90 Mm - Diameter Tolerance, 90.3 Mm - Minimum Wall Thickness, 5.20 Mm - Minimum Socket Depth, Not Less Than 107 Mm Pipe Composition For Item 35 And 36 - In Accordance To Pns 65:1993 For Upvc Pipes For Potable Water Supply - Pvc Resin Should Be Made With 90% K65 Resin By Mass In Accordance To Pns 291:1991 - Normal Working Pressure, 150 Psi - Maximum Working Pressure, 760 Psi - C-value ( Hazen- Williams Flow Factor) Is In Range From 140 To 160 - 15ᵒ Chamfered At Tail End In Accordance To Pns 65:1993 - Socket Type In Accordance To Iso 1452-2 - Temperature Resistance At 170ᵒc - 2024 Year Up To Present Manufactured - Genuine Printing/marking The Pipes Shall Be Clearly Marked With The Following Information Spaced At Intervals Of Not More Than One Meter With The Following Text: - Name Of Product - Nominal Outside Diameter, Mm - Series And/or Nominal Pressure, Mpa - Manufacturer’s Name And/or Recognized Trademark - The Words “made In The Phil.” - The Words “for Potable Water” Jointing/seal - Machine-installed Metal Reinforced Integrated Gasket Seal In Accordance To Iso4633 (epdm Rubber) And Sae1008 (carbon Steel) - Resilient With Chemical Contact Associated In Treatment Of Potable Water C. Hdpe Pipe 300 Meters- Black Pe Tubing 1-1/2” Specification: - Nominal Size: 1-1/2" - Outside Diameter: 50mm - Cutting Length: 60 Meters - P.r. 160 Psi, Sdr 11, 4.55 Mm. Additional Requirement: - Bidders Must Provide Samples For Small Fittings And Brochure For Big Ones. - Fob Kabankalan City Lot 3-₱ 519,650.00 A. Fabricated Fittings 10 Pcs.- Sleeve Type Coupling 2"x 10” 10 Pcs.- Sleeve Type Coupling 3"x 10” 10 Pcs.- Sleeve Type Coupling 4"x 10” 10 Pcs.- Sleeve Type Coupling 6"x 10” 10 Pcs.- Mechanical Flange Adaptor 3" 10 Pcs.- Mechanical Elbow 4"x 90° 10 Pcs.- Mechanical Elbow 6"x 45° 10 Pcs.- Mechanical Elbow 6"x 90° 10 Pcs.- Mechanical Elbow 3"x 90° 50 Pcs.- Mechanical Gasket 2” 5 Pcs.- Mechanical Tee 4”x 4” 20 Pcs.- Flange Follower 4 Holes 10 Pcs.- Mechanical Follower 4 Holes 20 Pcs.- Flange Follower 6 Holes Specification: - Black Iron Materials - Cement-coated (in And Out) - With Neocrene Rubber Gasket - With Gi Bolt And Nuts 1/2" X 2-1/2"(l) - Black Paint Coating Additional Requirements: - Bidders Must Provide Samples For Small Fittings And Brochure For Big Fittings. Fob Kabankalan

Details: Description Invitation To Bid For The Supply And Delivery Various Equipment Intended For The Municipal Engineering Office, This Municipality/gds-2025-023 1. The Municipal Government Of San Vicente, Palawan, Through The General Fund Intends To Apply The Sum Of Fifteen Thousand Pesos (₱15,000.00) For Lot 1; Thirty-three Thousand Pesos (₱33,000.00) For Lot 2; Two Hundred Thirty Thousand Pesos And Seven Hundred Fifty Pesos (₱230,750.00) For Lot 3; Thirty-one Pesos (₱31,000.00) For Lot 4 Being The Abc To Payments Under The Contract For Supply And Delivery Various Equipment Intended For The Municipal Engineering Office, This Municipality/gds-2025-023. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Lot - 1 1. Unit 1 Water Dispenser (bottom Load) Specifications Excellent Heating And Cooling Performance Fast Heating (85-90 Degrees In 10 Mins) Extra Cold Water (3-8 Degrees) Energy Efficient (p12/day Electrical Cost Hot & Cold) Rust-free Durable And Sanitary Stainless Steel Water Tanks For Hot And Cold Hot Water Child Lock Lot - 2 1. Unit 2 Electric Drill Specifications Drilling Capacities Steel 6.5mm Wood 15mm No Load Speed 0-4,200 Rpm Overall Dimensions 209 Mm Net Weight 1.2 Kg Continuous Rating Input 370w 2. Unit 2 Grinding Machine Specifications Model: Gws 700 06013a31k0 Rated Input Power: 710w No-load Speed: 12.000 – 12.000rpm Disc Diameter: 115 Mm Grinding Spindle Thread: M14 Weight: 1.7kg Switch: Lockable Switch Features: High-performance, High-quality Small Angle Grinder High Removal Rate And Outstanding Overload Capacity Enduring Performance From Reliable Structure Design And Quality Components Optimal Comfort And Control Due To Lightweight, Compact, And Ergonomic Design Ideal For Metal Grinding, Deburring, Finishing And Cutting, Concrete Grinding And Wall Chasing Rated Input Power: 670w No-load Speed: 12,000rpm Grinding Spindle Thread: M10 Disc Diameter: 100mm Weight: 1.8kg Uses: For Grinding, Cutting Of Metal, Concrete, Marble, Granite Powerful And Reliable Tool For Tradesman High Value-to-money Powerful 670w Input Power Maximum Safety - Come With Burst Proof Guards And 2-motion Switch 3. Unit 2 3" Electric Plainer Specifications Volts:220-240v~50/60hz Input Power:1050w No-load Speed:16000rpm Planning Width&depth:82x3mm Heavy Duty Aluminum Base Aluminum Side Cover Self-cooling Belt System With 2 Pieces Planning Blades With 1piece Belt With 1set Parallel Guide With 1pcs Depth Guide Packed By Color Box 4. Unit 2 1.5 Hp Submersible Pump Specifications Power Rating: 1100w The Speed Is 3450 Rpm. 50mm Discharge Power: 220v 60 Hertz (hz) Head: 11m Dimensions: 20m3h For Pure Water 1.5 Horsepower Size: 2x2 Lot - 3 1. Unit 1 Hydraulic Crimping Tools Specifications Max Pressure: 14 Tons Max Stroke: 12mm Crimp Range: 10~120mm² 2. Unit 1 A-type Fiber Glass Step Ladder (double Sided-12ft) 3. Unit 1 Fiber Glass Industry Extension Ladder 32 Ft 4. Unit 1 Rigid Bolt Cutter S14 5. Unit 1 Rubber Insulated Gloves Class 2 Specifications Voltage Rating; 17,000 Volt Ac And 25,500 Volt Dc 6. Unit 5 Leather Gloves Protection Class 00 Specifications Voltage Rating: 500 Volts Ac And 750 Volts 7. Unit 2 Fluke 303 Clamp Meter Specifications 600ac Current Measurement Cat Iv 300v/cat Iii Safety Rated 300m Jaw Size For Numerous Applications Resistance Range Of 40 Kω Slim, Ergonomic Design Is Easy To Carry And Simple Use Easy To Read Backlight Display 8. Unit 2 Analog Multi-tester Specifications Power Source: Dc Style: Gold Plate Color: Gold Item Weight: 320 Grams Drop And Shock Proof Multi Meter (made In Japan) Dc V 1000v, Ac V 750 And Dc A 0.25a Resistance Up To 200mω , Capacity Up To 10 Micro Farad, Db Measurement: -10db To 22db Gold Plate Test Pins Allow Excellent Conductance Taut Band Meter Adopted, And Band Is Made Of Platinum Alloy Subtotal Lot - 4 1. Piece 2 Electrode Handle 2. Set 2 Welding / Cutting Torc With Cutting Tip 3. Meter 20 Oxy And Acetylene Hose With Fitting 4. Set 1 Acetylene Regulator Assy 5. Units 2 Digital Caliper 2. The Municipal Government Of San Vicente, Palawan Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Thirty (30) Calendar Days. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Municipal Government Of San Vicente, Palawan And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00p.m., Monday – Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 5 To 26, 2025 From The Given Address And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (₱500.00) Per Lot. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees, In Person Or Through Electronic Means. 6. The Municipal Government Of San Vicente, Palawan Will Hold A Pre-bid Conference On February 12, 2025, 9:30 A.m. At Conference Room, Municipal Government Center, San Vicente, Palawan And/or Through Video Conferencing Or Webcasting Via Zoom, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual And Online Or Electronic Submission On Or Before February 26, 2025, 1:00 P.m. Late Bids Shall Not Be Accepted. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On February 26, 2025, 1:30 P.m. At The Conference Room, Municipal Government Center, San Vicente, Palawan Given Address Below And/or Via Zoom. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. For Online Submission, The Bidder Shall Submit Simultaneously Their Bids In Two (2) Separate Folders ( 1 For Technical/eligibility Documents And 1 For Financial Documents) Using A Two-factor Security Procedure Consisting Of An Archive Format (.zip Or .rar) Compression And Password Protection And Disclose The Password For Accessing Their Respective Bid Submission Only During The Actual/virtual Bid Opening. Bidding Documents Not In Compressed Archive Folders And Are Not Password-protected, Shall Be Rejected. However, Bidding Documents Not Properly Compressed And Password-protected, As Required Shall Be Accepted, Provided That The Bidder Or Its Duly Authorized Representative Shall Acknowledge Such Condition Of The Bid As Submitted. The Bac Shall Assume No Responsibility For Improper Compressed Or Password-protected Folder, Or For Its Premature Opening. 11. The Municipal Government Of San Vicente, Palawan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Leah A. Oblian Bac Secretariat Office Address: Municipal Government Center, Poblacion San Vicente, Palawan Electronic Mail Address: Bacsanvicentepalawan@gmail.com Contact Number: 09171575200 (sgd.) Orlando C. Estoya Mun. Disaster Risk Reduction And Management Officer Bac Chairperson 1st Posting

Details: Description Item Description Of Works To Be Done A Part A: Facilities For The Engineer B Part B: Other General Requirements C Part C: Earthwork D Part D: Plain And Reinforced Concrete Work E Part E: Finishing And Other Civil Works F Part F: Electrical Works G Part G: Plumbing Works

Details: Description 1 Lot - Construction Of Pump House & Perimeter Fencing Estimated 12.46km From City Proper Labor And Materials By Outside Work-contract As Per Plan A. Pump House Area: 13 Sq. M. ● Concrete Structure All Smooth Finish Walls & Beams ● Concrete Roof With Steel Deck Frames ● Three (3) Rooms ● Chlorine & Electrical Room With Wooden Door ● Genset Room Opened & Ramp For Genset Mobilization ● Flooring Elevation At Least 30cm From Original Ground Level B. Perimeter Length: 41 Meters (rectangular Lot) ● Lot Area: 100 Sq. M. ● 2' Concrete First Plus 4' Interlink Perimeter Fence All 4 Faces With Corresponding Concrete Post And Footings ● All 4' Interlink Faces Tightly Fastened/welded With Round Bar ● Front Face With Steel Matting Gate 2" Tubular Frame (3 Meters Wide) ● Perimeter Height All 6' ● All Painted Interlink Fence And Steel Post/frames Requirements: ● Certificate Of Philgeps Registration - Platinum Membership ● Pcab License .

Details: Description Province Of Batangas Municipality Of San Luis Standard Form No: Sf-good-05 Revised On: July 28, 2004 Invitation To Apply For Eligibility And To Bid The Municipal Government Of San Luis, Batangas, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors/contractors To Apply For Eligibility And To Bid For The Re: Schedule Of Bidding Of Hereunder Project: Name Of Project : Purchase Of One Unit Wheel Type Backhoeloader Location : San Luis, Batangas Brief Description : Purchase Of One (1) Unit Wheel Type Backhoeloader Specifications: Engine Eu Stage Ii, Diesel Engine Turbo Charge Water Cooled, 4 Stroke 4 Cylinder Max Power: 71.6 Kw (96 Hp) @ 2200 Rpm Gross Torque: 377 Nm @ 1400 Rpm Transmission Torque Converter With Gear Box, Power Shuttle Gear Box Between Forward And Reverse Gears With 4 Forward & 4 Reverse Gear Steering Hydraulic Power Steering Electrical 12v Battery System (180ah) Tyres Front: 12.5/80x18-12pr Rear: 16.9x28-12pr Speed Forward Max: 40 Km/hr Reverse Max: 9.3 Km/hr Hydraulics Smart Hydraulics: 245 Bar Pump O/p: 134 Lpm @2200 Rpm / Gear Pump Weight: 8150 Kgs With Standard General Purpose Bucket Drive 4 Wheel Drive Provide Flexibility To Switch 2 Wheel Drive To 4 Wheel Drive By Operator Depending Upon The Work Requirements Maximum Static Dimensions Overall Length: 6.04 M Wheelbase: 2.22 M King Post Travel: 1.03 M Minimum Ground Clearance: 0.48 M Slew Ground Clearance : 0.65 M Height To Top Of Bonnet : 1.99 M Height To Top Of Cabin : 3.00 M Overall Height : 3.71 M Track Width - Rear : 1.70 M Track Width - Front: 1.93 M Width Over Bucket : 2.25 M Side Reach To Centre Line Of Machine : 6.08 M Overall Width Of Machine: 2.35 M Approved Budget For The Contract: P 3,980,000.00 Contract Duration: Ten (10) Calendar Days Notes: 1. Bidder Must Highlight Their Specifications At Their Respective Catalog According To Procuring Entity Specifications 2. Bidder Must Have Mayor’s Permit Nature Of Business As Importer Of Heavy Equipments. Prospective Bidders Should Have Experience In Undertaking A Similar Project Of Backhoeloader Within The Last Two (2) Years, With An Amount Of At Least 50% Of The Proposed Project For Bidding. The Eligibility Check/screening As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail” Criteria. Post-qualification Of The Lower Calculated Bids Shall Be Conducted. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R. A. 9184 And Its Implementing Rules And Regulations. Activities Schedule 1. Submission Of Document As Specified In The Bidding Docs February 13, 2025 2. Pre-bid Conference February 12, 2025 (2:00 Pm) 2. Issuance / Purchase Of Bid Documents February 13, 2025 3. Submission Of Bids February 19, 2025 (not Later Than 12:00 Noon) 4. Opening Of Eligibility & Tech Envelope February 19, 2025 (1:00 Pm) 5. Opening Of Financial Envelope February 19, 2025 (1:00 Pm) Bid Documents Will Be Available Only To Perspective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 Per Bidder To The Municipal Treasurer’s Office Of The Municipal Government Of San Luis, Batangas. The Bac Will Issue Bidding Documents Only To Bidders Declared By The Bac To Be Eligible For The Bidding Upon Payment Of A Non-refundable Amount Of P 1,680.00 Per Annum Registration Fee To The Municipal Treasurer’s Office Of Municipal Government Of San Luis, Batangas The Municipal Government Of San Luis, Batangas Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Pertinent Of Their Bids. Rosemarie S. Hernandez Mgso/ Mbac Chairman

Description: Electronic Auction - Price Registration, for a Period of 12 Months, Aiming at the Possible Acquisition of Electrical Materials, Intended for the Municipal Department of Public Works.

Description: Germany – Electrical Wiring And Fitting Work – Elektroanlagen