Drone Tenders

Details: Title: Παροχή Συμβουλευτικών Υπηρεσιών Εθνικής Στρατηγικής Για Το Διαδίκτυο Των Πραγμάτων (iot) Και Για Τα Μη-επανδρωμένα Οχήματα description: Το Διαδίκτυο Των Πραγμάτων (iot) Έχει Τη Δυνατότητα Να Μεταμορφώσει Πολλές Πτυχές Της Ζωής Μας, Από Την Υγειονομική Περίθαλψη Και Τις Μεταφορές Έως Την Ενέργεια Και Τη Βιομηχανική Κατασκευή Και Μεταποίηση. Προκειμένου Να Αξιοποιηθεί Πλήρως Αυτό Το Δυναμικό, Είναι Απαραίτητο Να Αναπτυχθεί Μια Ολοκληρωμένη Εθνική Στρατηγική Για Τη Χρήση Της Τεχνολογίας Iot. Αυτό Το Έγγραφο Περιγράφει Μια Τέτοια Στρατηγική, Με Στόχο Τη Δημιουργία Ενός Ευνοϊκού Περιβάλλοντος Για Την Ανάπτυξη Της Χρήσης Της Τεχνολογίας Iot Στη Χώρα Μας, Δημιουργώντας Μια Ανταγωνιστική Και Καινοτόμο Βιομηχανία Iot Και Μεγιστοποιώντας Τα Οφέλη Για Την Κοινωνία Και Την Οικονομία. Για Το Iot, Το Όραμα Είναι Να Δημιουργήσουμε Μια Πιο Ενοποιημένη Και Πιο Συνδεδεμένη Χώρα, Στην Οποία Οι Τεχνολογίες Iot Χρησιμοποιούνται Για Τη Βελτίωση Της Ζωής Των Ανθρώπων, Τη Δημιουργία Νέων Επιχειρηματικών Ευκαιριών Και Την Υποστήριξη Της Βιώσιμης Οικονομικής Ανάπτυξης. Οι Στόχοι Μας Για Το Iot Περιλαμβάνουν: • Αύξηση Της Χρήσης Του Διαδικτύου Των Πραγμάτων Σε Βασικούς Τομείς Όπως Η Υγειονομική Περίθαλψη, Οι Μεταφορές Και Η Ενέργεια, Προκειμένου Να Βελτιωθεί Η Παροχή Υπηρεσιών Και Να Μειωθούν Το Κόστος Και Το Περιβαλλοντικό Αποτύπωμα. • Υποστήριξη Μιας Βιώσιμης Οικονομικής Ανάπτυξης, Δημιουργία Νέων Θέσεων Εργασίας Και Βελτίωση Της Ποιότητας Της Ζωής. • Ενίσχυση Της Καινοτομίας Και Της Επιχειρηματικότητας Στον Τομέα Του Iot, Με Σκοπό Την Προώθηση Νέων Προϊόντων, Υπηρεσιών Και Μοντέλων Εφαρμογών. • Διασφάλιση Ότι Τα Οφέλη Του Διαδικτύου Των Πραγμάτων Μοιράζονται Όλοι Οι Πολίτες, Ανεξάρτητα Από Την Κοινωνικοοικονομική Τους Κατάσταση, Ηλικία Ή Τοποθεσία Τους. • Προώθηση Της Διαφάνειας Και Της Διαλειτουργικότητας, Σε Διεθνές Επίπεδο, Των Συστημάτων Iot Μέσω Της Διεθνούς Συνεργασίας. • Αξιολόγηση Και Εξέταση Υφιστάμενων Δομών Και Πρακτικών Υπό Το Πρίσμα Της Εθνικής Στρατηγικής Για Το Iot Παράλληλα, Η Ταχεία Ανάπτυξη Της Βιομηχανίας Μη-επανδρωμένων Οχημάτων Παρουσιάζει Οικονομικές Ευκαιρίες Που Θα Μπορούσαν Να Αξιοποιηθούν Για Την Προώθηση Της Καινοτομίας Και Της Ανάπτυξης, Αλλά Αυτές Οι Ευκαιρίες Δεν Υλοποιούνται Πλήρως Λόγω Έλλειψης Συντονισμένου Σχεδιασμού Και Επενδύσεων. Η Θέσπιση Ενός Σαφούς Και Συνεκτικού Πλαισίου Για Τα Οχήματα Αυτά Κρίνεται Απαραίτητη Για Την Ασφαλή, Υπεύθυνη Και Ρυθμιζόμενη Ενσωμάτωση Τους Στον Εθνικό Χώρο, Καθώς Και Τη Μεγιστοποίηση Των Οφελών Που Μπορούν Να Προκύψουν Για Την Κοινωνία Και Την Οικονομία. Η Έγκαιρη Και Αποφασιστική Παρέμβαση Της Δημόσιας Διοίκησης Είναι Ζωτικής Σημασίας Για Την Προώθηση Της Ελλάδας Σε Ανταγωνιστική/ Ηγέτιδα Θέση Στην Υιοθέτηση Μη-επανδρωμένων Οχημάτων Και Αυτόνομων Ρομποτικών Συστημάτων/ Drones, Καθώς Και Στην Αποτροπή Σοβαρών Κινδύνων Για Την Ασφάλεια Των Πολιτών. Για Τα Μη-επανδρωμένα Οχήματα, Οι Στόχοι Της Στρατηγική Περιλαμβάνουν: • Προώθηση Της Ασφαλούς Και Υπεύθυνης Χρήσης Των Μη-επανδρωμένων Οχημάτων Μέσω Της Ανάπτυξης Σαφών Και Συνεπών Κανονισμών Και Κατευθυντήριων Γραμμών • Ενίσχυση Της Ασφάλειας Και Της Ιδιωτικότητας Των Λειτουργιών Των Μη-επανδρωμένων Οχημάτων Μέσω Της Εφαρμογής Μέτρων Όπως Ασφαλή Συστήματα Επικοινωνίας Και Αναγνώρισης • Εξασφάλιση Της Λειτουργίας Των Αυτόνομων Μη-επανδρωμένων Οχημάτων Με Ασφάλεια Και Αποτελεσματικότητα, Παράλληλα Με Τη Λειτουργία Των Επανδρωμένων Οχημάτων (αεροπλάνα, Ελικόπτερα, Αυτοκίνητα, Πλοία, Υποβρύχια) Εναρμονίζοντας Την Προσέγγιση Για Την Ανάπτυξη Κανονισμών Που Θα Επιτρέψουν Την Καινοτομία Και Την Οικονομική Ανάπτυξη Αυτής Της Σημαντικής, Αναδυόμενης Βιομηχανίας • Εναρμόνιση Του Τρόπου Με Τον Οποίο Σχεδιάζονται Οι Κανονισμοί Για Να Διασφαλιστεί Ότι, Για Να Κατασκευάζω Και Να Λειτουργώ Αυτόνομα Ρομποτικά Συστήματα, Αυτό Που Θεωρείται Ασφαλές Είναι Το Ίδιο/παρόμοιο Σε Όλα Τα Περιβάλλοντα Λειτουργίας (ξηρά, Αέρα, Θάλασσα) • Προώθηση Της Ανάπτυξης Της Βιομηχανίας Μη-επανδρωμένων Οχημάτων Με Την Προώθηση Της Έρευνας Και Της Ανάπτυξης, Την Ενθάρρυνση Των Επενδύσεων Και Τη Στήριξη Της Ανάπτυξης Των Μικρών Και Μεσαίων Επιχειρήσεων • Προώθηση Της Χρήσης Μη-επανδρωμένων Οχημάτων Προς Όφελος Της Κοινωνίας, Μεταξύ Άλλων Για Την Αντιμετώπιση Καταστροφών, Την Περιβαλλοντική Παρακολούθηση Και Άλλες Εφαρμογές Δημόσιου Συμφέροντος. (παρ.1.3 Και Παράρτημα Ι Της Διακήρυξης)

Details: Description Name Of The Procuring Entity: University Of Northern Philippines Project Reference Number: 2024-07-17-632 Name Of The Project: Standard Form Number: Sf-good-60 Location Of The Project: Unp Vigan City Revised On: May 24, 2004 Standard Form Title: Request For Quotation Date: 12-sept-2024 Quotation No.: A-145 Company Name: ______________________________________________ Address: __________________________________________________ Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions As Required Herein, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Until Sept. 16, 2024 – 9:00 A.m. In The Return Envelope Attached Herewith. Fatima F. Rocamora, Edd Bac Chairperson General Conditions: 1. All Entries Shall Be Printed/handwritten. 2. Delivery Period Within 25 Calendar Days 3. Warranty Shall Be For A Period Of Six (6) Months For Supplies & Materials, One (1) Year For Equipment, From Date Of Acceptance By The Procuring Entity. 4. Price Validity Shall Be For A Period Of 60-120 Calendar Days 5. Philgeps Registration Certificate Shall Be Attached Upon Submission Of The Quotation 6. Bidders Shall Submit Original Brochures Of The Product/s Being Offered. 7. Bidders Shall Submit Mayor’s/business Permit/bir Certificate Of Registration 8. Bidding Shall Be By Lot. Failure To Quote In At Least One Item Shall Be Cause For The Disqualification Of The Bid Proposal. Item No. Unit Item/description Qty Unit Price Total Price 1 Lot – Abc: ₱ 632,223.40 1. Unit Video Camera, Hd, With Accessories (wireless Microphone Transmitter, Wireless Microphone Windscreen, Do-it-all Handle, Wide-angle Lens, Micro Tripod), 64-megapixel, 3 Axis Gimbal Stabilization, Video Resolution 4k Ultra-hd, Hdr Video Resolution 2.7k/fhd, Iso Range Photo: 100-6400 (16 Mp), 100-3200 (64 Mp), Video: 100-6400, Slow Motion: 100-3200, Maximum Video Bitrate 100mbps, Battery Charger. Os Ios 11.0 Or Later Android 7.0 Or Later -1- 2. Unit Dslr Camera, Approx. 24.2mp Aps-c Cmos Sensor With 1.6x Crop Factor; Up To 23 Fps Continuous Shooting With Af/ae Tracking; 4k Uhd (6k Oversampling) And 4k 60p -2- 3. Unit Lens For Dslr Camera, Compact Telephoto Zoom, Filter Size: 72mm; Max Aperture: F/4; Dual Use Focus Ring/control Ring For Exposure Settings; With Nano Usm; 10x Optical Zoom; Lens Image Stabilization -1- 4. Unit Stabilizer For Dslr Camera (compatibility: Action Camera, Mirrorless Camera & More; Axis Stabilization/type: Three-axis; Dimensions: (w X H X D) 280 X 157 X 74mm; Weight: 1000g) -1- 5. Unit Monopod For Dslr Camera, 3-section Photo Monopod, Aluminum With Quick Power Lock (weight: 0.7 Kg; Top Attachment: ¼” Screw, 3/8” Screw; Leg Sections: 3; Min Height: 62 Cm; Maximum Height: 160 Cm -2- 6. Unit Drone Camera, Compact & Foldable Design; 20mp Stills Or Up To 5.4k Ultra Hd Video; 3-axis Gimbal With 22mm Lens & 1” Cmos; Master Shots Automated Themed Filming; Focus Track Subject Tracking Modes; Quick Shot Aerial Effects; Hyperlapse Modes For Timelapse Videos; 4-antenna Remote With 7.5-mile Range; 4-direction Obstacle Avoidance; D-log 10-bit Color & 12.6-stop Raw -1- 7. Unit Wireless Microphone, Universal Wireless Microphone System 4channel Mic Set With Four Handheld Mics Fixed Frequency Long Range 260ft -1- 8. Unit Lapel Mic, Wireless Carrier Frequency: Uhf 613-870mhz, Frequency Steadying: Less Than 0.002%, Modulating Mode: Fm, Audio Dynamic Range: Over 70db, Audio Frequency Res: 100hz-15khz, Audio Output Level: 0-280mv, S/n Ratio: Over 70db, 8 T.h.d.: Less Than 0.5%, Sensitivity: 3uv For 30db S/n -2- 9. Unit Action Camera, 27 Mp With Improved Performance; 5.3k60/2.7k240 Video, 27mp Photos; Hyper Smooth 5.0 Image Stabilization; Front & Rear Lcd Screens, Wi-fi & Bluetooth Connectivity; 33’ Waterproof; 8x Slow-motion Video; 1720mah Capacity Rechargeable Battery -1- 10. Unit Memory Card For Dslr Camera, 64gb Sd/sdhc/sdxc Card Uhs-ii U3 Class 10 300mb/s R, 260mb/sw -1- 11. Unit Smartphone, Size: 6.4 Inches; Resolution: 2340 X 1080 Pixels, 29.5:9 Ratio, 403 Ppi; Technology: Dynamic Amoled; Refresh Rate: 120hz; Screen-to-body: 83.24%; Features: Hdr Support, Scratch-resistant Glass (corning Gorilla Glass 5), Ambient Light Sensor, Proximity Sensor, System Chip: Qualcomm Snapdragon 8 Gen 1 Sm8450 (4 Nm); Processor: 1 X 2.8ghz Cortex-x2 + 3x 2.50ghz Cortex-a710 + 4x 1.8ghz Cortex-a510; Gpu: Adreno 730; Ram: 8gb; Internal Storage: 128gb, Not Expandable; Os: Android (13) -1- 12. Unit Ram (random Access Memory) For Desktop Computer, 16gb 2666 Mhz Desktop High-speed Memory Ram -2- 13. Unit Console, Digital Mixing Console, Broadcasting Console (fader Configuration 16 + 1 (master); Input Channels 40 (32 Mono + 2 Stereo + 2 Return); Aux Buses 20 (8 Mono + 6 Stereo); Input Channel Functions 8 Dca Groups; Inputs 16 Mic/line (xlr/trs Combo) + 2 Stereo Line (rca Pin) -1- 14. Unit Omnidirectional Microphone, Configurable Ultra-high Gain Omnidirectional Microphone, Pick-up Pattern: Omnidirectional, Frequency Range: 20 Hz-20,000 Hz +/-1db, Dynamic Range: 106db, 1 Khz At Max Spl, Current Draw: 500 Μa -2- 15. Unit Headphones, Over Ear Foldable Studio Headphones With 40 Hour Battery Life, Bluetooth 5.0 And Hd Microphones -2- 16. Unit Audio Interface, 192x4 Usb C Audio Interface For Recording, Podcasting, Streaming With Studio Quality Sound, 1 Xlr In And Music Production Software -1- 17. Unit Studio Monitor, Professional Bi-amp 5” Powered Studio Monitor Pair, Black -1- 18. Unit Microphone Cables, Xlr Microphone Cable 15 Ft. -1- 19. Unit Microphone Stand, Tripod Microphone Stand With Telescoping Boom -2- 20. Unit Pop Filter, Xl Pop Filter, Screen Diameter: 6”; Length: 26.5”; Weight: 10 Oz.; Clamp Range: .39 -1- --audio Visual Equipment For The Public Information Office Brand And Model: Delivery Period: Warranty: Price Validity: After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above: The Above Quoted Prices Are Vat-inclusive. ______________________________ Printed Name/signature ______________________________ Tel. No./cellphone No. E-mail Address Date: _________________________

Details: Description Unit Item Description Quantity Lot Security Services For Pmma Fy 2025 1 Contract Period The Contract Period Shall Be For Twelve (12) Months, January 1 To December 31, 2025. Scope Of Service 1. Provision Of 24-hour Security Services To The Pmma Campus. Shall Render 12 Hours’ Services Per Shift Daily To Ensure The Safety And Security In The Academy. 2. The Security Agency Shall Assign Twenty (20) Security Guards, (5) Relievers, And Designated One (1) Safety Officer. Deliverables 1. Security Personnel A. Officer In Charge 1 B. Assistant Officer In Charge 1 C. Dayshift Security 9 D. Nightshift Security 9 E. Relievers 5 F. Safety Officer 3 (deputized) 1 Security Plan Total Area Area 1st Shift 2nd Shift Of Post 0700h-1900h 1900h-0700h Officer In Charge 1 Assistant Officer In Charge 1 1 Main Gate 2 1 2 Aldea Gate 1 1 3 Navy Gate / Housing Area 1 1 4 Egh 1 1 5 Safety Center 1 1 6 Admin Bldg. 1 1 7 Motor Pool 1 1 8 Academic Buildings 1 9 Supply / Chapel / Dst / Admissions 1 10 Office Secretary 1 Total 10 10 Relievers 5 Safety Officer 3 (deputized) 1 2. Firearms A) Handgun 9mm (with License/fully Loaded Ammunition) 12 B) Extra Magazine With Fully Loaded Ammunition 12 C) Shotgun 12 Ga (with License/fully Loaded Ammunition) 1 D) 12 Ga Extra Ammunition 18 3. Communication Equipment A) Base Radio (uhf) With Complete Accessories 1 B) Licensed Handheld Radio 20 C) Handheld Radio Extra Battery 20 D) Handheld Radio Charger 20 E) Cellular Phone With Unlimited Call And Text 1 4. Security Operations Equipment" A) Motorcycle - Enduro Type (at Least 150cc) 2 B) Four Wheeled, Air-conditioned Vehicle (preferably Pick-up) 1 Note: 3.1.) Rent For Vehicles Must Be Included In The Monthly Billing 3.2.) Motorcycle With Agency Logo, Siren And Blinker; And Four Wheeled, Air-conditioned Vehicle With Agency Logo, Search Light, Siren And Blinker. 3.3.) Vehicle Maintenance And Repair Of The Vehicle Will Be Shoulder By Service Provider. 3.4.) Vehicle Rental And Fuel Allocation Cost Will Be Billed To The Client 5. Uniform: Based On Ra 11917" A) Tropical Blue – Long Sleeves For Gates And Administration Building (and During Events) B) Tropical Blue – Short Sleeves For Other Posting C) Reflectorized Vest And Reflectorized Hand Gloves D) Security Belt With Complete Accessories • Medicine Kit • Radio Holder • Whistle • Teargas • Flashlight • Low Carry Holster (9mm) • Night Stick (retractable) • Handcuff E) Personal Protective Equipment (4 Sets) 4 • Hard Hat • Safety Vest • Traffic Cone • Construction Boots • Safety Mask • Safety Gloves • Fireman’s Suit • Fireman’s Helmet F)bush Jacket - For Security Officer As Prescribed By Pnp Sosia 6. Support Equipment" A. One (1) Biometrics For Attendance Of Security 1 B. Body Camera 10 C. Guard Tour System D. One (1) Set Of Desktop Computer/laptop 1 E. One (1) Of Printer With Photocopier 1 F. One (1)digital Camera 1 G. One (1) Drone 1 H. Two (2) Binoculars 2 I. Two (2) Megaphones 2 J. Four (4)search Lights 4 K. Office Supplies I. Logbook Ii. Bond Paper Iii. Ball Pen Iv. Envelope V. Pencil Vi. Printer Ink 7. Other Equipment" A) Computer Table And Chair 1 B) Outpost Tables And Chairs 9 C) Filing Cabinet 1 D) Firearms Vault 1 E) Documents Vault 1 F) Air-condition Unit 2hp, Inverter 1 G) Under Chassis Mirror 5 H) Metal Detector 3 Qualifications For The Security Agency The Qualifications Of The Security Agency Are Outlined As Follows: A. Should Possess A Minimum Of Five (5) Years Of Experience In Providing Security Services. B. Must Be An Active And Good-standing Member Of The Philippine Association Of Detective And Protective Agency Operators (padpao). C. Must Be A Duly Licensed And Registered Service Provider With The Department Of Labor And Employment (dole) – Do 174 S. 2017. D. Should Be Registered With The Securities And Exchange Commission (sec), Department Of Trade And Industry (dti), Or Cooperative Development Authority (cda) As Applicable." E. Must Be Duly Registered With The Social Security System (sss), Home Development Mutual Fund (hdmf), Pag-ibig And Philhealth, With The Latest Clearance Certificate. F. Must Have Received A Very Satisfactory Rating From At Least One (1) Government Agency Or Private Corporation With Whom The Service Provider Has Had A Past Or Ongoing Contract. G. Must Submit Performance Evaluation / Feedback From Customer" H. Certificate Of No Pending Case From Dole And Nlrc I. Must Have A Policy As Proof Of Their Employees’ Insurance. J. Must Have Certificate Of Registration From National Privacy Commission (npc) In Accordance With The Applicable Rules On The Registration Of Data Processing Systems And Notifications Regarding Automated Decision-making. K. Must Have A Valid License To Operate From The Philippine National Police Supervisory For Security And Investigation Agencies (pnpsosia). Other Requirements For The Security Agency 1. The Bidder Must Submit A Cost Distribution List, In Line With Their Bidding Bill Per Personnel. Included The National Holidays Pay And 13th Month Pay. Salary Rate Must Be Based On Dole Cost Distribution Per Month Region Iii Central Luzon - Wage Order No. Rb Iii - 25 Effective Oct. 17, 2024. (395 Days, Based On Dole Handbook Worker's Statutory Monetary Benefits 2024 Edition) Salary Rate 1st Tranche – Jan – Apr 15 Salary Rate 2nd Tranche – Apr 16 – December Agency Fee – 20% 2. The Winning Security Agency Must Explain To The End User And Bac Committee The Entry Data In The Billing Financial Proposal For Clarification. 3. The Salary Of Security Agency Security Personnel Must Be Given Twice A Month Regardless Of Date. 4. The Bidder/security Agency Must Provide Death And Accidental Insurance To Their Personnel Immediately Upon The Implementation Of The Contract. 5. The Security Agency Must Submit A Copy Of Monthly Remittance Of Sss, Philhealth, Pag-ibig Of Security Personnel To Pmma With Latest Certificate Of Clearance 6. Submission Of Qualification Documents Of Security Personnel Is Required Prior To The Start Of Contract Implementation. A. Copy Of Employee Personal Data Sheet Containing Details Such As License, Sss, Pag-ibig, Philhealth Numbers, And Other Pertinent Information: I. Latest Copies Of The Barangay, Police, And Nbi Clearance. Ii. Health Permit Iii. Copy Of Pre-employment Medical Exam 7. The Security Agency Must Copy Furnished The Pmma All The Documents And Compliance Submitted To Dole. (attached In Their Monthly Billing Documents To Pmma) 8. The Security Agency Must Comply With All The Deliverables Upon Or Before The Implementation Of The Contract. 9. Must Conduct Site Inspection At Pmma Prior To The Start Of Contract. Traffic Assessment And Security Assessment 10. The Security Agency, If Will Construct A Barracks Inside The Academy, Must Have Its Own Electric And Water Meter, And Must Have Separate Billing For Electricity And Water (if Applicable). 11. An Inspector From The Security Agency Must Conduct An Inspection In Pmma At Least Twice (2x) A Month.

Details: Description Stock Unit Description Qty No. 1 Unit Ohp Projector 2 Xga Resolution White And Colour Light Output At 5,500 Lumens Gesture Presenter Muli-pc Projection 2 X Hdmi Split Screen High Quality And Cost-effective Connectivity Full Compatibilty Real-time Auto V&h Keystine Correction 2 Unit Id Printer 2 Print Metho - Dye Sublimation (direct-to-card) Resolution - 300dpi Continuous Tone Master Making Speed - 18 Seconds (a4.100%) Print Ribbon - Ymcko 400 Prints 1/2 Panel Ymcko 560 Prints Ymckok 330 Prints Resin Black 1000 Prints Print Speed - Approx. 21 Sec For Ymcko Approx. 4.5 Sec For A Resin Black Accepted Card Size - Cr-80 (2.13x3.37 Inch / 53.98x85.6 Mm) Accepted Card Thickness - 0.01-0.039 Inch / 0.25-1.00mm (10-40mil) Accepted Card Type - Pvc Ort Polyester Cards With Polished Pvc Finish Input Hopper Card Capacity - 100 Cards (0.030 Inch / 0.76 Mm / 30mil) Output Hopper Card Capacity - 50 Cards (0.76 Mm / 30mil) Memory - 64mb, 8mb Flash Display - Lcm With Multi-language Supported Operation System - Win7 And Above, Macos V.10.6 Or Above Way To Print - Pc Link Interface - Usb2.0, Ethernet (optional Module) Bundle Software - Carddesiree Cs (windows-base Only) Power - Ac Adapter Dc 24.5v/4.08a Weight - 4.9kg / 10.8lbs (ribbon And Module Excluded) Dimension(wxhxd) - 7.8x8.15x13.94 Inch / 199x207x354 Mm Certifications - Fcc, Ce, Ccc, Ctuvus Optional Accessories - Contact Smart Ic Card Encoding Module Contactless (rfid) Encoding Module Iso14443a, Iso14443b, Iso15693 Magnetic Stripe And Encoding Module Iso7811 (hi-co & Low-co) Optional Accessories Flipper Module (for Dual-sided Printing) High Capacity Input Hopper (400 Cards Loader) Ethernet Tcpip Connection Mode Cleaning Roller (dust Arrester Excluded) 3 Unit Drone 1 Medium Tele & Wide-angle Dual Primary Cameras 46-min Max Flight Time Omnidirectional Obstacle Sensing O4 Hd Video Transmission Dual-camera 48 Mp Photos Dual-camera 4k/60fps Hdr Videos Wide-angle & 3x Medium Tele, Subjects That Tell A Story Max Video Specification 4k/100fps Hdr Video Up To 4k/60fps Colors Modes 10-bit D-log M 10-bit Hlg 3x Medium Tele Camera 2.4pm Pixel Size 70 Mm Format Equivalent F/2.8 Aperture Wide-angele Camera 2.4pm Pixel Size 24mm Format Equivalent F/1.7 Aperture Inclusive Of The Ff. Accessories Dji Aair 3 Nd Filterrs Set Dji 65w Car Charger Dji 100w Usb-c Power Adapter Dji Air 3 Low-noise Propellers Dji Air 3 Battery Charging Hub 4 Unit Camera 1 30.3mp Full-frame Cmos Sensor 0.05 Secs Focusing Time 5,655 Selectable Focus Position Ev-6 Focusing Limit Dual Sensing Is And Combination Is Dust And Drip Resistant 1 Year Warranty + 2 Years Through Caanon Red App Af Modes: One-shot, Af, Servo Af, Manual Af Point Selection: Automatic Selection, Manual Selection Af System System Points: Max. 5,655 Selectable Af Point Positions / Up To 143 Af Areas (auto Selection) Built-in-flash: N/a- Continuous Shooting Speed (shots Per Sec) (up To): 8 (one-shot Af) / 5 (servo Af) Dimensions (excl. Protrusions) (mm) (approx): 135.8 X 98.3 X 84.4 Drive System: Leasscrew-type Stm Effective Pixels (megapixels): 30.3 Exposure Compensation: Stills: Manual: +3 Stops In 1/3-stop Or 1/2-stop Increments, Aeb: +2 Stops In 1/3-stop Or 1/2-stop Increments Movie Recording: +3 Stops In 1/3- Or 1/2-stop Increments Eye Detection Af: Available: One-shot Af/ Servo Af Fl;ash Modes - Guide Number Iso 100 Meters Image Resolution: 6720 X 4480 (l) 4464 X 2976 (m) 3360 X 2240 (s1) 2400 X 1600 (s2) 6720 X 4480 (raw) 6720 X 4480 (c-raw) Image Stablilizer: 5-axis Electronic Image Stablisation (digital Is) Lcd Monitor (size) (inch): 3.15 Lcd Monitor Resolutions (dots): 2,100,000 Manual Focus: Yes Memory Card Type: Sd/sdhc/sdxc Memory Card, Uhs-ii And Uhs-i Cards Supported Metering Mode: Real-time Metering Using The Imege Sensor, 384-zone (24x16) Metering, Still: Evaluative, Partial Spot & Center-weighted Average. Video: Center- Weighted Average And Evaluatiove Metering With The Image Sensor Movie Format: Mp4 Optional Power: Ac Power (adapter Kit Ack-e6 / Usb Power Adapter Pd-e1) Peripheral Connections: Usb-type C, Hdmi (type C), Mic-in, Remote Control Terminal Processor Type: Digic 8 Sensor Size: Full-frame Cmos Shooting Modes: Stills: Scene Intelligent Auto, Flexible- Priority Ae, Program Ae, Shutter-priority Ae, Aperture- Priority Ae, Manual Exposure, Bulb Exposure, Custom Shooting Modes (c1/c2/c3) Movies: Scene Intelligent Auto, Program Ae, Shutter-priority Ae, Aperture-priority Ae, Manual Exposure, Custom Shooting Modes (c1/c2/c3) Shutter Speed Range (sec.): 30 - 1/8000, Bulb Silent Shutter: Available: Single / Continuous Shot Standard Power Supply: Battery Pack Lp-e6n / Lp-e6 Still Image Format: Jpeg, Raw, Raw + Jpeg, C- Raw, C-raw, C-raw+jpeg , Raw(dual Pixel), C-raw(dual Pixel) Viewfinder Coverage (approx.): 100% Viewfinder Type: 0.5-inch Oled, 3.69 Million Dots Weight (g) (including The Battery And Memory Card) (approx.) *for Camera Kits, Weight Includes Kit Lens(es): 1360 White Balance: Auto (ambience Priority), Auto (white Priority), Preset (daylight, Shade, Cloudy, Tungsten Light, White Flourescent Light, Flash), Custom, Color Temperature Setting (approx, 2500-10000 K) White Balance Correction And White Balance Bracketing Features Provided *flash Color Temperature Information Transmission Possible X-sync (sec.) : 1/200 Battery: Lp-e6 / Lp-e6n / Lp-e6nh Charger: Lc-e6 / Lc-e6e Battery Grip: Bg-e22

Details: Description Inauguration And Turnover Ceremony For The Tourist Rest Area (tra) In The Municipality Of Pagudpud, Ilocos Norte On May 17, 2024 Project Background During The 2022 Sona Of President Ferdinand Marcos Jr., He Clearly Identified Tourism As A Major Tool For The Economic Resurgence Of The Philippines And Acknowledged The Abundance Of Opportunities That The Tourism Sector Creates. Dot Secretary Ma. Esperanza Cristina Garcia Frasco Responded To President Marcos’ Directives By Implementing The Construction Of “tourist Service Center And Rest Areas (tscra)” As One Of The Strategies For Tourism Development. This Project Is In Partnership With The Tourism Infrastructure & Enterprise Zone Authority (tieza). The Construction Of This Tourism Facility Is In Line With The Ra 9593 Or The Tourism Act Of 2009 Under The Following Sections: Section 3. Objectives – Pursuant To The Above Declaration, The State Shall Adopt The Following Objective: (o) Maintain International Standards Of Excellence In All Tourism Facilities And Services, And Promote The Country As A Safe And Wholesome Tourist Destination; Section 34. Tourism Infrastructure Program — The Department, In Accordance With The National Tourism Development Plan And Local Government Initiatives, Shall Coordinate With The Department Of Public Works And Highways (dpwh) And The Department Of Transportation And Communications (dotc) In The Establishment Of A Tourism Infrastructure Program In The Respective Work Programs Of Said Agencies, Identifying Therein Vital Access Roads, Airports, Seaports And Other Infrastructure Requirement In Identified Tourism Areas. The Said Agencies And The Department Of Budget And Management (dbm) Shall Accord Priority Status To The Funding Of This Tourism Infrastructure Program; Section 63. The Tourism Infrastructure And Enterprise Zone Authority — Under The Supervision Of The Secretary And Attached To The Department For Purposes Of Program And Policy Coordination Shall Be A Body Corporate Known As The Tourism Infrastructure And Enterprise Zone Authority (tieza); Section 64. Mandate — The Tieza Shall Be A Body Corporate Which Shall Designate, Regulate And Supervise The Tezs Established Under This Act, As Well As Develop, Manage And Supervise Tourism Infrastructure Projects In The Country. It Shall Supervise And Regulate The Cultural, Economic And Environmentally Sustainable Development Of Tezs Toward The Primary Objective Of Encouraging Investments Therein. It Shall Ensure Strict Compliance Of The Tez Operator With The Approved Development Plan. Pursuant Thereto, The Tieza Shall Have The Power To Impose Penalties For Failure Or Refusal Of The Tourism Enterprises To Comply With The Approved Development Plan, Which Shall Also Be Considered A Violation Of The Terms Of Accreditation. Such Power Shall Further Be Defined Under The Implementing Rules And Regulations Of This Act. The Department Of Tourism Adheres To The Existing Law Under Ra 9593 Or The Tourism Act Of 2009 In The Provision Of Tourism Related Infrastructures. To Address The Directive Of President Marcos To Make Going Around The Philippines More Convenient To Tourists, Tourism Secretary Christina Garcia-frasco Propose For The Construction Of Tourist Rest Area (tra). In Ilocos Region, One (1) Of These Is Located In Ilocos Norte. Upon Its Completion, It Shall Be Turned-over To The Lgu Of Pagudpud. As Part Of The Activity, An Inauguration And Turnover Ceremony Is Set To Happen On May 17, 2024. Duration The Inauguration And Turnover Ceremony Will Be Conducted On May 17, 2024 In The Municipality Of Pagudpud, Ilocos Norte. Project Requirements And Deliverables The Event Will Be Conducted With The Following Logistical Requirements As Follows: I. Event Proper A. Event Stage Set-up With The Provision Of The Following: A. Tent That Can Accommodate At Least 250 Pax B. Venue Set-up Composed Of Flowers And Distinct Ilocano Crafts C. Led Wall, Sound Sytem, And Microphones D. Generator Set For A Maximum Of 4 Hours Including Technical Run B. Tra Decorations Composed Of Flowers And Distinct Ilocano Crafts, Ribbon, Scissors, Candles, Lighter, Symbolic Key For The Ribbon Cutting C. Professional Services For Photo And Video Coverage (1 Team) • Submission Of High-resolution Photo And Video Raw Files Of The Various Activities Of The Said Project • Aerial/drone Shots With Pilot • Production Of Avp/summary Documentation With Same-day Edit Of Activities D. Professional Fee Of Samiweng Singers And Cultural Dancers (including Meals And Transportation) E. Professional Fee For Host During The Program Ii. Freshen-up Rooms And Accommodation A. May 17, 2024 A. 1 Room For Secretary Frasco, 6am-8pm B. 8 Rooms For Asecs, Directors, Osec, Ea Of Sec Frasco, Security, Opaa And Trcrg Staff B. Accommodation Of Dot R1 And Lso Staff On May 15-17, 2024, 4pax C. Accommodation For The Dot R1 Staff On May 16-17, 2024, 6pax Iii. Iv. V. Provision Of Meals A. Lunch On May 15, 2024 (dot Lso, Osc, Osec), 8pax B. Dinner On May 15, 2024 (dot Lso, Osc, Osec), 8pax C. Lunch On May 16, 2024 (osec, Osc, Dotr1 And Lso), 15pax D. Dinner On May 16, 2024 (osec, Osc, Dotr1 And Lso), 15pax E. Breakfast On May 17, 2024 (scf, Usecs, Aecs, Directors, Osec, Osc, Trcrg, Branding, Ea Of Scf, Security, & Opaa Staff, 24pax F. Breakfast On May 17, 2024 (dotr1 And Lso), 9pax G. Am Snacks On May 17, 2024 For Vvips, Dot & Tieza Officials, Provincial And Local Officials (for Confirmation), 70pax H. Packed Am Snacks On May 17, 2024 For Attendees, Tourism Stakeholders, And Other Officials, 200pax I. Provision Of Lunch For Vvips, Dot & Tieza Officials, Provincial And Local Officials, 70pax J. Provision Of Packed Lunch For Attendees, Tourism Stakeholders, Barangay Officials, 200pax K. Pm Snacks On May 17, 2024 For Scf, Usecs, Asecs, Directors, Osec, Osc, Trcrg, Branding, Ea Of Scf, Security, And Opaa Staff, 24pax L. Pm Snacks On May 17, 2024 For Dot R1 And Lso, 13pax M. Dinner On May 17, 2024 For Scf, Usecs, Asecs, Directors, Osec, Osc, Trcrg, Branding, Ea Of Scf, Security, And Opaa Staff, 24pax N. Provision Of Dinner On May 17, 2024 For Dot R1/lso Staff, 13pax Provision Of Banners A. Welcome Banners, 6ftx12ft, 1pc B. Love The Philippines Tarpaulin, 6ftx12ft C. Tra Inauguration Tarpaulin, 6ftx12ft Provision Of Transport Service And 4x4 Rentals A. 4 Vans As Transport Service For Scf, Usecs, Asecs, Directors, & Ea Of Scf, Securities & Opaa On May 17, 2024 Itinerary: Laoag-pagudpud-paoay-laoag, Ilocos Norte B. Provision Of 4x4 Vehicle Rental At Suba Sand Dunes Vi. Provision Of Bouquet For Sec. Christina Garcia Frasco Vii. Provision Of Promotional Materials For Vvips And Officials 10 Sets Of Region 1 Baskets - Ilocos Products (1 Kilo Bagnet, 1 Kilo Longanisa, 2 Packs Chichacorn) Legal And Technical Requirements A. Valid Mayor’s/business Permit B. Philgeps Registration No. Or Certificate C. Dot-accreditation D. Latest Income Tax Return Filing E. Quotation Or Bid Proposal Shall Be Submitted Not Later Than The Indicated Deadline On The Philgeps Website F. Quotation Or Bid Proposal Shall Be Submitted Physically On A Sealed Envelope At The Dot Laoag Sub-office, Laoag City, Ilocos Norte Or The Dot Regional Office I At The Nisce Business Center, With The Complete Required Legal And Technical Requirements. G. Notarized Omnibus Sworn Statement Shall Be Required Upon Issuance Of Notice Of Award, Budget The Approved Budget For The Contract (abc) Is Nine Hundred Seventy-six Thousand Five Hundred Eighty Pesos (php 976,580.00), Inclusive Of All Applicable Government Taxes. Supplier Or Provider Shall Agree To A Send-bill Arrangement (government Procedure) Or Bank Deposit Through Landbank Or Other Bank With Appropriate Bank Charges Charged To The Account Of The Supplier.

Details: Casablanca Ncc Launch Campaign background: the New U.s. Consulate Compound (ncc) In Casablanca Is A Milestone Achievement For U.s.-morocco Relations. It Underscores The Importance Of The Diplomatic Relationship Between The United States And The Kingdom Of Morocco. Construction On This State-of-the-art Compound Commenced In 2022 And The Design Is Inspired By Morocco’s Beautiful Landscape, Cultural Heritage, And Colors. the Construction Company On This Project, Bl Harbert International Hired Hundreds Of Moroccan Tradesmen And Women During The Construction Phase Of The Compound. Dozens Of Moroccan Companies Supplied Materials And Services Needed To Complete The Work Successfully. The Project Is Nearing Completion, And The Dedication Of The Space Is Tentatively Scheduled For The End Of 2024. scope Of Work For Videographer Services For Ncc Launch Campaign. work Time Frame: June 30 – September 31st the United States Consulate General In Casablanca Is Soliciting Offers From Qualified And Established Companies To Perform Professional Videography Services For The Shooting And Production Of Nine (9) Videos In Support Of The Launch Of The New U.s. Consulate General Compound In Casablanca. the Work Includes Vigorous Pre-production (narrative Development, Treatment, Co-writing Of Scripts And Storyboards), Production (compiling Raw Field Footage, Stock Footage, B-roll, Images, And On-camera Interviews) And Post-production Process (editing, Voice Over, Subtitling, And Motion Graphics), Resulting In High Quality Short Videos (reels) For Social Media And Other Promotional Use. The Videos Are To Be Rendered In Vertical And Horizontal Formats To Allow For Various Usage. additionally, The Project Requires The Capturing Of High-resolution Aerial Photographs And Video Content To Provide A 360-degree Experience Of The New U.s. Consulate Campus. The Bidding Quotation Should Include The Use Of The Company’s Own Equipment For The Full Project. Proof Of The Required Permit And/ Or License To Operate A Drone In A Residential Area, Including Insurance And Safety Awareness, Are Required. the Public Diplomacy Section Will Provide The Approved Branding And Logos To Be Used In The Post-production Phase Of The Video Designs, Awarded Bidder Is Not Permitted To Use These Logos Outside Of The Statement Of Work Described Below. The Public Diplomacy Section Will Also Provide Background Information And Historical Materials To Illustrate The Videos And Identify Guest Speakers For Each Video. completion Of Deliverables Include The Following Work: development (assist And Manage Narrative Development Including, But Not Limited To, Style, Format, Project Length, Target Audience, Etc.). preproduction (co-writing And Finalizing Shooting Scripts, Interview Questions, Casting (if Necessary), Storyboard, Animation Elements, Music, Locations; And Detailed Shot-list); Post-production (video Editing, Audio Mixing, Animation, Artwork, Motion Graphics, Titles, Subtitles, Digital Effects, And Theme Music). the Videos Will Be Shot In Casablanca. No Travel Outside Casablanca Will Be Required For This Project. Travel Within The City Of Casablanca May Be Required. The Service Provider Will Travel By Their Own Means While Keeping To The Mutually Agreed Schedule. videos fully Produced And Edited Videos (length Of No More Than 1min30s) Delivered In The Following Format: each Video Will Be Delivered In 4k Landscape And Portrait. each Video Will Include Licensed Music That Will Be Pre-approved By The U.s. Consulate In Casablanca Public Diplomacy Team. each Video Will Be Delivered In Different Formats To Be Shared On Social Media Platforms: Facebook, Youtube, Instagram, And Twitter. some Videos Projects Might Require Adding Animations. each Video Will Be Delivered With Still Images That Will Be Used As A Thumbnail For The Following Platforms: Facebook, Youtube, Instagram. each Video Will Include Open Captions In The Spoken Language. content Of The Nine Videos As Follows: each Video Shall Cover The Below Subjects: video One: Teaser Video video Two: What Is A Consulate And Why A New Consulate Compound? video Three: History Of The U.s. Presence In Casablanca video Four: Building The New Consulate Compound video Five: Designing The New Consulate Compound video Six: Consular Services video Seven: Foreign Commercial Service video Eight: The Overseas Security Advisory Council video Nine: Dar America timeline: once The Project Is Contracted Out, The Service Provider Shall Have Two Weeks To Conduct Pre-production Stages, In Coordination With The Public Diplomacy Section. This Includes But Is Not Limited To: research: Understand Stories And Objectives pre-production Meeting: Key Messaging, Identify Audience. strategic Vision: Story Identification, Storyboarding, Planning And Shoot Preparation. the Service Provider Shall Deliver The Draft For The First Video Within The First Month After The Project Is Contracted Out. The Service Provider Will Modify The Drafts Based On Feedback From The Public Diplomacy Section And Deliver The Videos In Regular Intervals. The Service Provider Will Have Delivered The Final Versions Of All Nine (9) Videos No Later Than September 30, 2024. some Video Projects May Require Capturing Footage Across Multiple Locations In Casablanca. The Service Provider Will Travel By Their Own Means While Keeping To The Mutually Agreed Schedule. For Filming On The Premises Of U.s. Government Properties, The Service Provider Will Be Accompanied To The Shooting Locations By The U.s. Consulate Public Diplomacy Section Designee(s) To Facilitate Access And Coordinate Onsite Activities. music Licensing: the Service Provider Shall Be Responsible For Obtaining All Necessary Licenses For Any Music To Be Used In Any Deliverables. Unless Agreed Otherwise, The Costs For Such Licenses Shall Be Included In The Total Production Budget Set Forth Above. clearance/releases: all Footage Filmed Will First Be Submitted To The Regional Security Office (rso) Of The U.s. Consulate General For Clearance. The Storage Media (sd Card Or Similar) Containing Any Footage Filmed Within The Premises Of A U.s. Government Property Will Not Be Removed From Said Property Until The Rso Clears On Its Content. All Content For Public Release Will Be Reviewed By The Consulate To Ensure Compliance With Recording Restrictions. The Service Provider Will Be Informed Of These Restrictions Prior To The Start Of Recording. The Service Provider Shall Be Responsible For Obtaining All Necessary Clearance Releases, Permissions And/or Waivers From Any Other Rights Holders, Including Licensors Of Copyrights, Trademarks, Or Other Intellectual Property That May Be Used, Featured, Or Appear In The Deliverables. ownership: subject Always To U.s. Consulate Casablanca’s Satisfaction Of Its Payment Obligations Under This Agreement, The Service Provider Agrees That The “deliverables” Constitute Audio And Visual Work(s) Specially Commissioned And Made For Hire Within The Meaning Of The United States Copyright Law. all Tapes, Negatives And Prints Of All Pictures And Sound Tracks And Material, Exposed And/or Processed, In The Production Of The Deliverables, (except For Materials Supplied To Service Provider By U.s. Consulate Casablanca) And All Material And Content Contained In The Deliverables, Including But Not Limited To Any Characters, Names, Copy, Art, Logos, And Animation, And All Right, Title, Interest And Copyrights Therein, Shall Become The Property Of U.s. Consulate Casablanca Upon Delivery Thereof In Accordance With The Provisions Hereof. if The Deliverables For Any Reason Are Determined Not To Be A Work Made For Hire, Then Service Provider Hereby Grants And Assigns All Right, Title, And Interest To The Deliverables To U.s. Consulate Casablanca, And Service Provider Will Promptly Execute And Deliver Such Documents As May Be Requested By U.s. Consulate Casablanca In Order To Accomplish The Assignment And Transfer Of All Such Right, Title And Interest. Without In Any Way Limiting The Foregoing, Service Provider Hereby Waives Any And All “moral Rights,” And Any Rights Service Provider May Have. submission Documents: to Be Considered For This Opportunity, The Following Documents Must Be Submitted To The Contracting Officer Via Email To Casablancaproc@state.gov The Email Subject Shall Be The Number And Title Of This Solicitation. the Documents Include: detailed Pricing Proposal And Quote. retro Planning For All Project Stages As Detailed In The Above Scope Of Work. brochure Or Other Documentation Of The Firm Indicating Its Experience And Expertise In Video Production; And, at Least Three Sample Videos Of The Videographer (s) The Firm Is Planning To Use For The Project. vendor Shall Be Registered In Sam.gov Https://sam.gov/content/home invoice Requirements: all Invoices Should State The Purchase Order Number. invoices Shall Be Emailed To Rabatfmoinvoices@state.gov And Hard Copies Of Invoices Should Be Sent To The Below Address: embassy Of The United States att: Fmo Billing Office km 5.7, Avenue Mohamed Vi soussi, Rabat 10170 morocco all Payment Issues Should Be Addressed To The Financial Management Office (fmo), By Emailing Rabatfmoinvoices@state.gov

Details: Description Form Gs - 45 Request For Quotation Date: Quotation No.: Company Name: Address: Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than ____________________________________ In The Return Envelope Attached Herewith. Erra Madel R. Cabalquinto Procurement Officer Note: 1. All Entries Must Be Typewritten 2. Delivery Period Within 30 Calendar Days 3. Warranty Shall Be For A Period Of Six (6) Months For Supplies & Materials, One (1) Year For Equipment, From Date Of Acceptance By The Procuring Entity 4. Price Validity Shall Be For A Period Of _______________ Calendar Days 5. G-eps Registration Certificate Shall Be Attached Upon Submission Of The Quotation 6. Bidders Shall Submit Original Brochures Showing Certificates Of The Product Being Offered. Item No. Item & Description Qty. Unit Unit Price Office Supplies/equipment/furniture&fixture: 1 3"lever Arch File Folder With 2 Ring & Metal Finger Pull 30 Pc 2 Arch File Folder 3" Wd Hard Cover Wd Side Mechanism Ring Binder 2 Lever Archfile, Green/blue 15 Pcs 3 Arch Filefolder 3" Wd Hard Cover Wd Side Mechanism Ring Binder 2 Lever Archfile (gray) 10 Pcs 4 Ballpen - Black 0.30mm 1 Box 5 Ballpen - Black 0.50mm 14 Box 6 Ballpen (0.7) Black 5 Boxes 7 Ballpen (black & Red) 200 Pcs 8 Ballpen (black), Smooth Ink Pen 0.7 Mm (12 Pcs/box) 3 Box 9 Bond Paper A3, 80 Gsm 1 Ream 10 Bond Paper, Multi Purpose A4 Size 80 Gsm 20 Ream 11 Bond Paper, Multi Purpose Legal Size 80 Gsm 5 Ream 12 Bond Paper, Multicopy, 80 Gsm, Size: A4 27 Box 13 Bond Paper, Multicopy, 80 Gsm, Size: Legal 38 Box 14 Bond Paper, Multicopy, A4, 80gsm 96 Ream 15 Bond Paper, Multicopy, Legal 80 Gsm 67 Ream 16 Correction Tape, Disposable 61 Pcs 17 Date Stamp 1 Piece 18 Battery Aa ( 2 Pcs/pack) 4 Packs 19 Battery Aaa (4 Pcs/pack) 4 Packs 20 Binder Clip, Backfold, 32mm 10 Box 21 Binder Clip, Backfold, 41mm 10 Box 22 Binder Clips 1 Inch 32 Boxes 23 Blade 5 Box 24 Canon Board Paper, Long (white) 4 Pack 25 Carbon Paper, Legal, High Quality 1 Pack 26 Clear Book (long, Green) 18 Piece 27 Clear Book Refillable Long Size 30 Pc 28 Clear Tape Dispenser (standard Size) 1 Pcs 29 Colored Transparent Plastic Envelop Long (blue Color) 100 Pack 30 Check And Lddap Stamp Pad 2 Piece 31 Duct Tape (2 In X 25m) Gray 8 Rolls 32 Expanded Envelope (long,brown) 420 Pcs 33 Expanded Folder 25 Piece 34 File Folder, Long, Ordinary, Brown 50 Piece 35 File Folder, Long, Ordinary, White 50 Piece 36 Filing Folder With Finger Ring/binder And Metal Finger Pull, Legal (76mm X 230mm X 380 Mm) (horizontal) 5 Piece 37 Filling Folder W/ Finger Ring Binder (side Clip Long, Color Blue) 10 Pc. 38 Filling Folder With Finger Ring (76mmx230mmx380mm) 25 Piece 39 Film Carbon, Premium Quality, Blue Color 1 Pack 40 Folder, Brown, Legal Size, 100s/box 1 Pack 41 Folder, Tagboard White (legal) 100s/pack 3 Pack 42 Gel Pen (0.5 Mm) Black 5 Boxes 43 Glossy Photo Paper A4 3 Pack 44 Glossy Photo Paper, Legal Size 4 Packs 45 Glue All, Multipurpose White Glue, 130 Grams 13 Bot 46 Heavy Duty Stapler 26/6 2 Pc 47 High Quality Glossy Sticker Paper (legal) 2 Pack 48 Lever Arch File W/ Metal Edge, Horizontal, Long Size, Blue Color 50mm 15 Piece 49 Liquid Glue Gel, 130 Ml 2 Bottle 50 Logbook/record Book (500 Pages) 4 Pcs 51 Magazine File Box (w/out Cover , Small) 10 Box 52 Metal Cutter With Palstic Handle, Multipurpose Use, Heavy Duty, With Replaceable Blade 1 Piece 53 Number Stamp Pad 1 Piece 54 Office Chair, With Arm Rest, Adjustable Height, 360 Rotate, Mesh Comfortable Breathable Chair 3 Piece 55 Packaging Tape 1 Piece 56 Paper Clip, Small Size (2 Boxes) & Big 2 Boxes 2 Box 57 Paper Fastener Plastic, Assorted Color, 7cm 28 Box 58 Parchment Paper A4 20 Sheets 5 Pack 59 Pen Type Correction Tape 10 Pcs 60 Pencil (mongol #2) 2 Box 61 Pentel Pen, Broad 2 Pcs 62 Pentel Pen, Fine 2 Pcs 63 Permanent Marker, Black 3 Box 64 Philippine Flag, Size (l-8ft. X W-4ft. Nylon Silk) 3 Pc. 65 Photo Paper Water Proof,high Quality (legal) 5 Pack 66 Photopaper Glossy (a4 240gsm) 11 Packs 67 Photopaper Glossy (legal 240gsm) 15 Packs 68 Planters With Plate Big 5 Pcs 69 Post It 1/2 Inches For Tabbings 20 Packs 70 Post-it Super Stickynotes (4 Inch.x 3 Inch.) Assorted Colors) 8 Pad 71 Pvc Binding Cover (legal), Thin 3 Packs 72 Pvc Cover, Legal, 300 Mic (thick) 2 Pack 73 Record Book (500 Pages) 7'"x11.12" 10 Pc 74 Record Book, 500 Pages, Smythe Sewn 10 Piece 75 Redstone's Water Well Paste 10 Piece 76 Ring Binder - 1 Inch. 4 Pc 77 Ring Binder - 1/2 Inch. 4 Pc 78 Ring Binder 2" 2 Piece 79 Ring Binder Plastic Comb (14mm,110 Sheets) 3 Bundle 80 Ring Binder Plastic Comb (14mm,110 Sheets) 1 Bundle 81 Ring Binder Plastic Comb (25mm,200 Sheets) 2 Bundle 82 Ring Binder Plastic Comb (25mm,200 Sheets) 1 Bundle 83 Ring Binder, Plastic Comb (10mm,50 Sheets) 3 Bundle 84 Ring Binder, Plastic Comb (10mm,50 Sheets) 1 Bundle 85 Rubber Eraser 3 Pcs 86 Scissors (multi-purpose), Stainless Steel 2 Pcs 87 Scissors, Medium Size 5 Pair 88 Scotch Tape 1 Inch 2 Pcs 89 Sign Pen Donga My-gel 0.7 Black 2 Box 90 Sign Pen, Black, 0.3 Point 18 Piece 91 Sign Pen, Black, 0.5 Point 18 Piece 92 Sign Pen, Black, 0.7 Mm 7 Box 93 Sign Pen, Red-0.7 Mm Mygel 1 Box 94 Special Paper White 2 Pack 95 Speedo Index Tabs 2 Box 96 Stamp Pad Ink(color Violet Or Blue) 15 Bot. 97 Stamp Pad Ink, Violet 1 Piece 98 Stand Filling Box W/out Cover (royal Blue) Long Size 30 Piece 99 Staple Wire (23/10,50-70 Sheets) 1 Box 100 Staple Wire (23/17,120-160 Sheets) 1 Box 101 Staple Wire, Standard, 5000 Pcs/box No. 35 38 Box 102 Stapler Bookbinding Machine 1 Piece 103 Stapler With Remover (high Quality) 3 Pcs 104 Sticker Paper (legal), Vinyl Inkjet, High Quality 5 Packs 105 Sticky Note Pad 20 Packs 106 Sticky Notes (1" X 3") 6 Pack 107 Survey Envelop (brown Color) Size: Long 100 Pack 108 Tag Folder, Plain, Legal, Brown & White Combination, 100s/box 15 Box 109 Tape (1 In X 50m ) Transparent 10 Rolls 110 Tape, Transparent, 2 Inch 10 Piece 111 Uni-ball Gel Impact 1.0mm Ink Color Blue Um-153s (made In Japan) = Refill 1 Box 112 Waterproof Drone Bagpack For Dji Phantom 4 Pro Specs: Size 33x23x52cm. Weight 2kg Accom.quadcopter Drone, Remote Controller,batteries,battery Charger,propeller 1 Pcs 113 Whiteboard Marker Ink Refill (30ml) Black 1 Bottle 114 Whiteboard Marker Refillable 1 Box 115 Balloon Décor (purple 3 Packs & White 2 Packs; Assorted Sizes), 25pcs/pack 5 Pack 116 Wall Clock 1 Piece Janitorial/cleaning/health Care Supplies 117 Broom (walis Ting-ting) 4 Pc. 118 Broom, Soft Tambo, High Quality 6 Pcs 119 Chlorine 2 Kl. 120 70% Isopropyl Alcohol With Moisturizer 2 Gallons 121 Adhesive Bandages (50 Strips) Washproof 2 Boxes 122 Air Freshener, 280ml/bot.(glade) 1 Can 123 Air Refresher 320ml 2 Cam 124 Alcohol With Moisturizer, 70% (500ml) 3 Bots 125 Alcohol, 70%, Ethyl 2 Bot. 126 Alcohol, 70%, Ethyl 500ml With Spray 2 Bottle 127 Alcohol, 70%, Ethyl, 1 Gal 2 Gal 128 Alcohol, 70%, Ethyl, Scented, With Moisturizer 2 Gallon 129 All Purpose Glass Cleaner & Multi-surface 500ml 2 Bottle 130 Bathroom Tissue (2 Ply,150 Pulls X 12 Rolls) 2 Bundles 131 Complete First Aid Emergency Outdoor Kit Wd Handle And Waist Belt 4 Sets 132 Detergent Powder, All Purpose 1kl 10 Kls 133 Disposable Mask (black) 2 Boxes 134 Doormat, Cotton 4 Pc. 135 Duster 1 Piece 136 Dustpan 1 Piece 137 Empty Sacks 50 Pc. 138 First Aid Box/cabinet (wall Mounted) With Basic Medical Package Bundle 1 Unit 139 Hand Liquid Soap 5 Bottle 140 Insecticide, 600 Ml (420 G/can) (baygon) 2 Can 141 Isopropyl Alcohol 75% 5 Gallon 142 Kleen-it Ethyl Alcohol 70% Solution With Moisturizer 2 Gallon 143 Mop Head (cotton) 6 Pcs 144 Mosquito Killer 500ml 3 Bottle 145 Multi Insects Killer Spray, 600ml 1 Bot 146 Multi Insects Spray, Medium Size 1 Bottle/can 147 Muriatic Acid 1 Gal 148 Muriatic Acid/zonrox 2 Bottles 149 Sack Bag (50 Kilos Capacity) 130 Pcs 150 Sanitizing Gel With Moisture Lock (250ml) 2 Pcs 151 Soft Broom (walis Tambo) 3 Pc. 152 Surgical Gloves 4 Boxes 153 Thick Garbage Bag (xxl) Black 2 Rolls 154 Toilet Bowl Cleaner, 500ml 3 Bottle 155 Toilet Tissue (80 Sheets) 3 Pack 156 Toilet Tissue 2ply 12rolls/pack 25 Pack 157 Trash Bin (big) 1 Unit 158 Trashbag, Plastic, Black, (xxxl) 10 Pcs Per Pack Per Roll 10 Pack 159 Waterproof Gardening Gloves 10 Pairs 160 Wet Tissue, 20sheets/pack 6 Pack 161 Wet Wipes, 80s/pack 4 Pack 162 Zonrox 1 Gal. 0 - Ict Supplies/equipment/consumables: 0 - 163 Brother Ink Refill, Black, 1 Liter 1 Bottle 164 Brother Ink Refill, Cyan, 1 Liter 1 Bottle 165 Brother Ink Refill, Magenta, 1 Liter 1 Bottle 166 Brother Ink Refill, Yellow, 1 Liter 1 Bottle 167 Epson Ink 65ml (l5190) 5 Sets 168 Epson Ink Refill, Black-003,65ml 5 Bottle 169 Epson Ink Refill, Cyan-003,65ml 5 Bottle 170 Epson Ink Refill, Magenta-003,65ml 5 Bottle 171 Epson Ink Refill, Yellow-003,65ml 5 Bottle 172 Epson M2140 Monochrome 005 Ink Refill , 127ml 1 Bot 173 External Hard Drive, 1 Tb 1 Piece 174 Genuine Epson Ink No. 003 Color: Black (65ml) 4 Bots 175 Genuine Epson Ink No. 003 Color: Cyan (65ml) 3 Bots 176 Genuine Epson Ink No. 003 Color: Magenta (65ml) 3 Bots 177 Genuine Epson Ink No. 003 Color: Yellow (65ml) 3 Bots 178 Genuine Ink Epson 003 65ml. Magenta, Black, Yellow, Cyan (2 Bots. Each Color) 8 Sets 179 Genuine Ink Epson 103 65ml. Magenta, Black, Yellow, Cyan (2 Bots. Each Color) 8 Sets 180 Ink Bt5000c Color: Cyan (48.8ml) 2 Bots 181 Ink Bt5000c Color: Magenta (48.8ml) 2 Bots 182 Ink Bt5000c Color: Yellow (48.8ml) 2 Bots 183 Ink Btd60bk Color: Black (108.0ml) 2 Bots 184 L5290 Ink Refill (65ml) Cmyk 10 Sets 185 Load Card (smart And Globe) 30 Pcs 186 M.2 Nvme Ssd 1tb 1 Unit 187 Printer With Scanner Long, L5290 (3-in-1) 4 Unit 188 Refilling Ink: Black 1 Liter Uv Ink (epson) 5 Bottle 189 Refilling Ink: Cyan 1 Liter Uv Ink (epson) 1 Bottle 190 Refilling Ink: Magenta 1 Liter Uv Ink (epson) 1 Bottle 191 Refilling Ink: Yellow 1 Liter Uv Ink (epson) 1 Bottle 192 Scandisk Ultra 32gb 1 Piece 193 Ssd External Hard Drive 1tb 1 Unit 194 Usb 1tb Extreme Portable Usb 3.2 1 Unit Purpose: Abc 480,939.35 Requested Ict/office Supplies And Equipment/consumables To Be Used By Denr Penro Pdi - 1st Quarter Brand And Model : Delivery Period : Warranty : Price Validity : After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. Printed Name / Signature Tel. No. / Cellphone No. E-mail Address Canvasser

Details: 1. General: This Notice Of Intent (noi) Is To Notify Industry Of The Air Force’s Intent To Increase The Ceiling On The Roof Repair, Replacement, And Maintenance (r3m) Multiple Award Task Order Contract (matoc), And Gather Information From Industry, Specifically Small Business Roofing Contractors That Specialize In North American Industry Classification System (naics) Code 238160 – Roofing Contractors (small Business Size Standard Of $19m). The Ceiling Is Expected To Increase By $250 Million, From $325 Million To $575 Million. As A Result Of This Planned Ceiling Increase, The Ordering Period Of The Basic Contract Will Not Be Extended And Will Expire On 14 May 2025. in Accordance With (iaw) Far 15.201(e), The R3m Team Is Gathering Market Information To Understand If There Is Any Objection To An Increase In Ceiling From Small Business Roofing Contractors That Are Not Already On The R3m Roofing Matoc. Where A Small Business Roofing Contractor Objects To The Ceiling Increase, Please Provide Your Interest And Capability In Accordance With The Instructions In This Notice Below. Responses Shall Provide Evidence Of Experience In Each Type Of Roofing System Identified In The Scope Below, As Well As The Extent Of Their Experience Within At Least One Of The Geographical Regions Stated In Pararaph 2 Below. No Award Will Be Made From This Posting. Any Feedback Or Concerns On The Ceiling Increase Are Requested To Be Emailed To The Contact Information Stated In Paragraph 7 Below. Current Small Business R3m Roofing Contractors Do Not Need To Respond With Interest Or Capabilities, But Are Welcome To Provide General Feedback. any Sb Roofing Contractors That Do Not Object To The Ceiling Increase But May Be Interested In Sub-contracting Opportunities Or Prime Contracts At The Local Installation Level, Are Welcome To Respond To This Notice With Your Own Capability Statement (it Does Not Need To Include All Of The Information Requested Below). Your Capabilities Information Will Be Shared With Current R3m Prime Contractors, Or Local Installations’ Contracting Offices, As Applicable. 2. Geographical Regions: See Attachedn Document Entitled, "geographic Mapping". The R3m Services Are Divided Into Six Geographic Regions: West, Midwest, Northeast, Southwest, Southeast And Alaska (see Attachment One For Mapping). 3. Scope Of Work: The Scope Of Work Is To Perform Roof Maintenance, Repair, And Replacement (thermal And Moisture Protection) For Low-slope (weatherproof Membrane Types Of Roof Systems Installed On Slopes At Or Less Than 3:12 Or 14 Degrees), Steep Slope (water-shedding Types Of Roof Coverings Installed On Slopes Greater Than 3:12 Or 14 Degrees), And Metal (hydrostatic And Hydrokinetic Systems) Roofing Projects. Roof Assemblies Include All Items Of Work Included In The Elemental Classification Of The American Society For Testing And Materials (astm) Uniformat Ii B30. The Thermal Insulation, Vapor Retarder, Membrane, Drainage Components, Flashings, And Details (roof Edges, Scuppers, Parapets, Curbs, Drains, Coping Systems, Shingles, And Roofing Tiles, Etc.) Are Included In The Scope Of This Effort. The Features Of Work That Are Part Of The Structural Roof Assembly (framing (steel, Wood, Etc.), Structural Diaphragm, Decking, Purlins, Parapets, Roof Joists, Beams, Associated Hardware And Fixtures, Etc.) Regardless Of Material Are In Scope Of This Project. While Inspections Are Included In The Scope Of This Effort, The Specific Assessment Techniques, E.g. Thermal Imaging Or Unmanned Aerial System (uas)/drone Usage, To Include The Decision/approvals To Use These Techniques, Will Be Made At The Base/task Order Level In Accordance With (iaw) Relevant Air Force Guidance. the Astm Uniformat Ii B30 Features Of Work Incidental (in Terms Of Dollar Amount Related To The Direct Roofing Cost (labor, Equipment, Materials, And Subcontractor Markup)) Construction Activities Such As Asbestos Abatement, Hvac Disconnect/movement, Plaza Decks, Lightning Protection, And Walking Pads, Etc. Which Arise As A Result Of The Roofing Project Are In Scope Of This Contract. The Estimated Value Of This Incidental Work Should Not Exceed 30% Of The Direct Roofing Costs. all Roof Types, Systems, Materials, Membranes, And Services Listed In Ufc 3-110-03 Are Included. the Project Delivery Methods Shall Include Design-bid-build And/or Design-build. 4. Limitations On Subcontracting: The Contractor Must Be Capable Of Performing In Accordance With 52.219-14 -- Limitations On Subcontracting (deviation 2019-o0003) For Naics Code 238160. In Their Cover Letter, Interested Offeror(s) Shall Identify Any Potential “similarly Situated Entity” Arrangements Being Considered. A “similarly Situated Entity” Means A First-tier Sub-contractor, Including An Independent Contractor That Has The Same Small Business Program Status As That Which Qualified The Prime Contractor For The Award And That Is Considered Small For The Naics Code The Prime Contractor Assigned To The Subcontract The Sub-contractor Will Perform. If “similarly Situated Entity” Subcontracting Is Contemplated, The Cover Letter Shall Contain Detailed Information Concerning The Planned “similarly Situated Entity” Subcontracting/consulting Arrangement(s) (including Proposed Work Share, Eic Number(s),and All Applicable Categories Of Small Business Status) To Assure The Government That The Limitations Of Far 52.219-14, Limitations Of Subcontracting (deviation 2019-o0003) Can Be Met. The Limitations Identified In The Aforementioned Clause Require The Offeror/contractor To Agree That In The Performance Of Any Resultant Task Order Resulting From A Contract Award, It Will Not Pay More Than 75% Of The Amount Paid By The Government For Task Order Performance To Sub-contractors That Are Not Similarly Situated Entities). Any Work That A Similarly-situated Entity Further Subcontracts Will Count Toward The 75% Percent Subcontract Amount That Cannot Be Exceeded. 5. Submission Requirements (for Small Business Roofing Contractors That Object To The Proposed Ceiling Increase): cover Letter: identify Your Firm’s Name, Cage Code, Uei, Address, And Point Of Contact Information, Including Name, Email, And Phone Number. identify Your Small Business Status For Naics 238160 And Any Socio-economic Small Business Certifications. in Accordance With Paragraph 4 Above, Identify Any Small Business Teaming Partners That Would Be Considered “similarly Situated” For Consideration In Meeting Far 52.219-14, Limitations Of Subcontracting (deviation 2019-o0003. Joint Venture Entities Are Considered Prime Contractors – They Are Not Considered Prime-to-sub, Or A Teaming Partner Relationships. identify The Region(s) To Which You Are Interested. capabilities Information: do not Exceed Five (5) Pages: interested Roofing Contractors Must Provide A Narrative, Not To Exceed 5 Pages, To Demonstrate Their Experience In The Services Stated In Section 3 Of This Memorandum (low Slope, Steep Slope, And Metal Roofing Systems Iaw Ufc 3-110-03). The Narrative Shall Generally Describe At Least5 Years Of Corporate Experience Performing, Managing, And/or Subcontracting Roofing Projects Within The Last 5 Years) Installing The Roofing Systems At Each Air Force Installation Within The Region In Which They Are Interested. If Direct Experience At All Locations Can Not Be Demonstrated, You May Submit Evidence Of Direct Sub-contractor Relationships For Work At Those Locations. the Narrative Shall Demonstrate The Contractor’s Experience Performing Design-build Roofing Projects. the Narrative Shall Confirm That The Contractor Would Provide And Maintain Manufacturer Applicator Agreements Demonstrating The Capability Of Providing The Warranties Described In The Unified Facilities Criteria (ufc). the Narrative Shall Confirm That The Contractor Has Roof System Design Experience And Capability In Accordance With The Design Guidance In Ufc 3-110-03 Roofing. The Contractor Must Demonstrate The Capability To Do Roof Systems Design As Demonstrated By Including In Their Organization (may Be A Subcontractor) A Registered Roofing Consultant, Registered Professional Engineer Or Registered Architect That Derives His Or Her Principal Income From Roofing Design. The Contractor Shall Demonstrate Recent Experience (within 5 Years) Designing Roofing Systems In The Ashrae Climate Zone Of The Region In Which They Will Perform Work, In Accordance With The Whole Building Design Guide (wbdg) Unified Facilities Guide Specifications (ufgs) And Ufcs 6. Responde Due Date/time: Submit Your Response To The Mailbox And Individuals Identified In Para 7 Below, By Noon, Central Time, On 12 January 2024. 7. Contact Information: If You Have Any Questions, Comments, Or Concerns Regarding The Responses, Please Contact The Air Force Installation Contracting Center (aficc)/r3m Program Team At Aficc.r3m.roofingprogram@us.af.mil And The Corporate Contracting Officer, Sra Michael Mascorro At Michael.mascorro.1@us.af.mil. attachment 1: Geographic Mapping

Details: Description Pg-2024-0069: Request For Quotation - Furnishing And Delivery Of Office Equipment For Use In The Dpwh - Lued 1 - Planning And Design Section . Republic Of The Philippines Department Of Public Works And Highways La Union I District Engineering Office Regional Office I Lingsat, San Fernando City, La Union Name Of The Procuring Entity: Dpwh-la Union First Engineering District Request For Quotation No.:___________________________ Revised On: ______________________________ Date:______________________________________________ Standard Form/ Title: Request For Quotation Office/end-user: Planning And Design Section Company Name: ____________________________________________________________________________ Address: __________________________________________________________________________________ Tel No./fax No.: _______________________ Tin No.__________________________ Please Quote Your Lowest Price On The Item(s) Listed Below, Subject To The Terms And Conditions Stated Below And Submit Your Quotation Duly Signed By Your Representative Not Later Than 10 A.m. Of _____________________________________ ,manually Thru Sealed Envelope, To The Bac Secretariat For Goods, Dpwh La Union First District Engineering Office, Lingsat, San Fernando City, La Union. Terms And Conditions: 1. All Entries Must Be Typewritten Or Legibly Written. 2. Delivery Period Within Thirty (30) Days Upon Receipt Of The Approved Funded Purchase Order (p.o.). Administrative Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall Be Imposed For Non-delivery Without Valid Reason. 3. Warranty Shall Be For A Minimum Of Three (3) Months For Supplies & Materials; One Year For Equipment; 3 Years For It Equipment From Date Of Acceptance By The End-user. Sherylann B. Gonzales 4. Price Validity Shall Be For A Period Of Sixty (60) Calendar Days. Bac, Chairman 5. G-eps Registration Certificate/mayor's Permit Shall Be Attach Upon Submission Of The Quotation. 6. Bidders Shall Submit Original Brochures Showing Certifications Of The Product, If Applicable. 7. Please Indicate The Brand For Each Items Being Offered. 8. Attach Omnibus Sworn Statement For Abcs Above P50k 9. Attach Income/business Tax Return For Abcs Above P500k 10. The Approved Budget Ceiling For This Procurement Is 9. The Approved Budget Ceiling For This Procurement Is Php 934,000.00 Item No. Items & Description Qty Unit Unit Price Total Price 1 "specialized Laptop Processor & Chipset: Core I7 (12th Gen), 14-cores And 64-bit Or Its Equivalent Internal Memory: 16 Gb Ddr4 Storage: 512 Gb Ssd Display And Graphics: 14” Diagonal Full High-definition Wide Screen Display; 2gb Gddr6 Dedicated Graphics Memory Audio: Integrated High-definition Audio Support, Integrated Speakers And Integrated Digital Microphone Webcam: Integrated Widescreen Hd I/o Ports: 3 Usb (atleast 1 Type-c), Hdmi/display Port, Headphone/microphone Jack Network Interface: Bluetooth, And Wireless Lan (auto Detecting And Auto Sensing) Weight: Not More Than 1.9 Kg / 4.2 Lbs Software Operating System: Licensed Oem Windows 11 Professional 64-bit With Media Installer. Must Be Activated With Microsoft Prior To Delivery Recovery Media: All Drivers And Utilities Must Be Stored In Any Electronic Storage Media. It Must Be Properly Labelled And Virus Free. Office Software: Microsoft Office Standard (latest Version) Under Cloud Solution Provider (csp) Agreement. The Licenses Must Be Perpetual And Transferable. It Must Be Licensed And Named After Dpwh And Can Be Added To The Department’s Existing Tenant Domain Dpwhgovph.onmicrosoft.com And Primary Domain Dpwh.gov.ph. The Supplier Must Present A Certificate As A Certified Csp Direct Partner In The Philippines. Accessories Specification Mouse: Optical With Mouse Pad (same Brand As The Laptop) Carry Case: Manufacturer’s Standard Cable Adapter: Gigabit Ethernet Cable Adapter (for Laptop Models Without Ethernet Port) Headset: Headset With Microphone (1-meter Cable Length, With Noise Cancellation Feature, Audio Jack/usb Connections Type. Must Be Compatible With The Offered Laptop)" 1 Unit X-x-x-x Total Amount In Figures: Total Amount In Words: Purpose: Furnishing And Delivery Of Office Equipment For Use In The Dpwh - Lued I - Planning And Design Section . Brand And Model: ______________________________ Warranty: Delivery Period: ______________________________ Price Validity: After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item(s) At Prices Noted Above. If The Space For Delivery Period, Warranty And Price Validity Are Left Blank, It Means That I Concur With The Terms And Conditions Specified By Dpwh. Printed Name / Signature / Date Telephone #: (072)7002938 C/o Bac Secretariat Tel No. / Cellphone No. / E-mail Address Page 1 Of 2 Republic Of The Philippines Department Of Public Works And Highways La Union I District Engineering Office Regional Office I Lingsat, San Fernando City, La Union Name Of The Procuring Entity: Dpwh-la Union First Engineering District Request For Quotation No.:___________________________ Revised On: ______________________________ Date:______________________________________________ Standard Form/ Title: Request For Quotation Office/end-user: Planning And Design Section Company Name: ____________________________________________________________________________ Address: __________________________________________________________________________________ Tel No./fax No.: _______________________ Tin No.__________________________ Please Quote Your Lowest Price On The Item(s) Listed Below, Subject To The Terms And Conditions Stated Below And Submit Your Quotation Duly Signed By Your Representative Not Later Than 10 A.m. Of _____________________________________ ,manually Thru Sealed Envelope, To The Bac Secretariat For Goods, Dpwh La Union First District Engineering Office, Lingsat, San Fernando City, La Union. Terms And Conditions: 1. All Entries Must Be Typewritten Or Legibly Written. 2. Delivery Period Within Thirty (30) Days Upon Receipt Of The Approved Funded Purchase Order (p.o.). Administrative Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall Be Imposed For Non-delivery Without Valid Reason. 3. Warranty Shall Be For A Minimum Of Three (3) Months For Supplies & Materials; One Year For Equipment; 3 Years For It Equipment From Date Of Acceptance By The End-user. Sherylann B. Gonzales 4. Price Validity Shall Be For A Period Of Sixty (60) Calendar Days. Bac, Chairman 5. G-eps Registration Certificate/mayor's Permit Shall Be Attach Upon Submission Of The Quotation. 6. Bidders Shall Submit Original Brochures Showing Certifications Of The Product, If Applicable. 7. Please Indicate The Brand For Each Items Being Offered. 8. Attach Omnibus Sworn Statement For Abcs Above P50k 9. Attach Income/business Tax Return For Abcs Above P500k 10. The Approved Budget Ceiling For This Procurement Is 9. The Approved Budget Ceiling For This Procurement Is Php 934,000.00 Item No. Items & Description Qty Unit Unit Price Total Price 2 A4 Wifi Wireless Alll In One Ink Tank Printer Automatic Document Feeder (photocopy/scan) 4 Unit 3 Drone 46 Min Flight Time Omni Directional Onstacle Sensing 04 Hdvideo Transmission Dual-camera 48 Mp Photos Dual-camera 4k/60 Fps Hdr Videos 10 Bit - Hl6 10 Bit D-log M 3x Medium Tele Camera Wide Angle Camera 1 Unit 4 Dji Mavic 2 Pro Battery 3 Pc 5 Smartphone Octa-core Storage: 12gb - 256gb 120hz Refresh Rate Chipset: Qualcomm Snapdragon 8 Gen 3 Or Higher Gpu: Adreno 730 Or Higher 3 Unit 6 Smartphone Octa-core Storage: 8gb - 256gb 120hz Refresh Rate Chipset: Qualcomm Snapdragon 8 Gen 1 Or Higher Gpu: Adreno 730 Or Higher 6 Unit X-x-x-x Total Amount In Figures: Total Amount In Words: Purpose: Furnishing And Delivery Of Office Equipment For Use In The Dpwh - Lued I - Planning And Design Section . Brand And Model: ______________________________ Warranty: Delivery Period: ______________________________ Price Validity: After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item(s) At Prices Noted Above. If The Space For Delivery Period, Warranty And Price Validity Are Left Blank, It Means That I Concur With The Terms And Conditions Specified By Dpwh. Printed Name / Signature / Date Telephone #: (072)7002938 C/o Bac Secretariat Tel No. / Cellphone No. / E-mail Address Page 2 Of 2

Description: Specifications And Special Provisions 1. The Location Of The Work To Be Taken Place Is Located At The Dingman Pit #5 Located Approximately 10miles South Of Highway 13 On The West Side Of Highway 56. The Land Is Legally Described As E1/2-32-44-19-w4m. 2. Mobilization And Demobilization Shall Be Lump Sum As Per Bid Item #1 In The Unit Price Schedule And If Additional Equipment Is Required To Complete The Contract To Specification It Shall Be At The Expense Of The Contractor. There Will Be No Additional Compensation Expected Of The County For Mobilization. 3. For The Purpose Of This Contract, It Has Been Estimated That There Is Approximately 103,500m2 Of Soils (topsoil And Subsoil Combined) To Be Stripped At An Average Depth Of 0.23m And Placed In The Stockpile Location As Indicated In Drawing Ew01-01-2024. The Quantity Of Soils Shall Be Paid By Multiplying The In Place Stockpiled M3 By The Unit Rate Bid Item #2 In The Unit Price Schedule. It Is Estimated There Will Be Approximately 35,000m3 Placed In The Soils Stockpile. As Per The Code Of Practice The Topsoil And Subsoil (soils) Have Been Admixed Through Years Of Cultivation And Care Shall Be Taken To Not Mix The Soils With The Overburden Horizon Below However Ensuring That All Soils Have Been Salvaged Even If The Depth Exceeds 0.23m. After All Soils Have Been Salvaged From Below The Location Of The Overburden Stockpiles The Contractor Shall Contact The County To Complete A Base Survey For The Overburden Stockpiles. 4. It Has Been Estimated That There Is Approximately 15,500m2 Of Overburden To Be Stripped At An Average Depth Of 7.0m And Placed In The Stockpile Location As Indicated In Drawing Ew01-01-2024. The Quantity Of Overburden Shall Be Paid By Multiplying The In Place Stockpiled M3 By The Unit Rate Bid Item #3 In The Unit Price Schedule. It Is Estimated There Will Be Approximately 141,000m3 Placed In The Overburden Stockpile. While Stripping The Overburden It Is Important To Not Remove The In-situ Pitrun Material. As Per The Code Of Practice A Buffer Of 5.0m In The Horizontal Plane Shall Be Left From The Soils Stripping To The Start Of The Overburden Stripping. While Stripping The Overburden Care Shall Be Maintained To Slope The Edges Of The Pit At 1:1 Down To The Pitrun Seam Below. 5. There Is Approximately 730 Linear Meters Of Road Grading To Be Completed. The County Will Provide Initial C/l Grade Elevations For The Road To Be Constructed (drawing Ew01-05-2024). 5.1. There Is Approximately 50 Linear Meters Of Existing Road That Needs To Be Widened Approx. 3m (off Of Hwy 56) And Lifted To Final Grade (drawing Ew01-02a-2024). 5.2. There Is Approximately 680 Linear Meters Of New Road To Be Constructed For The Pit And Lease Access (north Of Soils Pile) (drawing Ew01-02a-2024 & Drawing Ew01-02b-2024) 5.3. All Widening Of The Existing Lease Road Will Be To The North Of The Existing Road To Maintain Clearance From The Ember Pipeline. 5.4. All Topsoil Shall Be Removed Before Placing Clay Fill For The Road Construction. 5.5. Prior To Placing The Fill Material The Road Shall Have A 10m Wide 6” Subgrade Prep. This Can Be Seen In The Standard Road Cross Section. (drawing Ew01-05-2024) 5.6. All Fill Material Required For The Road Shall Be Compacted To 98%spd With No More Than 150mm Per Lift Being Placed At Any Given Time. A Roll Test Will Be Required Prior To Placing Surface Gravel. 5.7. The County Will Supply Cr225 Base Course For The Roads From The Dml To A Depth Of 2-3”. After Placing The Material The Contractor Will Grade And Pack The Gravel In Place. 5.8. Back Slopes Of The Approach Off Of Highway 56 Shall Have 4”min Of Topsoil Spread On Them And Be Harrowed Ready For Hydroseeding. The Contractor Shall Not Be Responsible For Hydroseeding In These Areas After Construction Is Completed. 5.9. Backslopes On The Road Will Be A Minimum Of 5:1 At All Gates Openings And In Alberta Transportation Right Of Way. In All Other Places It Should Be A Minimum Of 3:1backslope From The Edge Of The Road To The Toe. 5.10. All Payments For The Construction Of The Roads Will Be By The Linear Meter And Inclusive Of The Fill Required For The Road As Per Bid Item #4 In The Unit Price Schedule. 5.11. Contractor Must Submit The Appropriate Applications, Acquire Necessary Permits, And Supply All Signs Required By Alberta Transportation For Working In Their Right Of Way Off Of Highway 56. This Is Inclusive Of The Work To Be Completed And No Additional Payment Will Be Required From The County. 6. There Is One 500mm Diameter Culvert To Be Installed Approximately 60m West Of The Approach Into The Pit Off Of Highway 56. The Location Of The Culvert Will Be Staked By The County After The Road Is Constructed. The County Will Supply The Culvert And Coupler To The Contractor For Installation. All Payments For The Installation Of The Culvert Will Be A Linear Meter Payment As Per Bid Item #5 In The Unit Price Schedule. If Required The Culvert Will Be Countersunk To Ensure That There Is A Minimum Of 300mm Cover Over The Culvert. (drawing Ew01-02-2024) 7. There Is Approximately 1500 Linear Meters Of 4 Wire Barbed Fence To Be Constructed To Alberta Transportation Class “b” Fence Specifications (drawing Ew01-01-2024 & Drawing Ew01-04-2024). Which Includes But Is Not Limited To: 7.1. Main Line Posts Pressure Treated 100-125mm Top Diameter And 2.13m (7’) Length With A Maximum Spacing Of 3.75m Between Posts. 7.2. Corner And Gate Posts Pressure Treated With 150-175mm Top Diameter And 2.44m (8’) Length With Bracing. Brace Wire 3.66mm Thick Soft Galvanized Wire Doubled 7.3. There Are 4 - 4 Wire Gates To Be Constructed Which Include 3 Gates @ 7m Wide And 1 Gate @ 13m Wide. Wire Gates Shall Be Inclusive With The Construction Of The Fence. The Wire Gates Shall Have 55mm Diameter Wooden Stays And Be Able To Be Opened From Either Side. 7.4. Barbed Wire Shall Be 2 Strand (four Point Galvanized 2.5mm Thick Strands). 7.5. Staples Are To Be 40mm Staples. 7.6. The Length Of The Fence Will Be Measured After Construction And Will Be Paid By The Linear Meter Of The Fence Installed Inclusive Of All Materials For The Fence And Gates As Per Bid Item #6 In The Unit Price Schedule. 8. There Is One 8.5m Wide Double Swing Gate To Be Installed. The County Will Supply 2 – 14’ Steel Swing Gates To Be Installed Approximately 50m West Of The Asphalt Approach Off Highway 56 As Identified. (drawing Ew01-03-2024). The Contractor Shall Supply And Install 2 Mounting Posts For The Gate. The Mounting Posts Shall Be A Minimum 6” Diameter Steel Pipe In A Minimum 18” Diameter Hole Drilled To A Minimum Of 8’ From The Surface Of The Ground. The Post Shall Be Backfilled With Concrete With At Least 7’ Of The Post Buried Below The Ground. The Posts Must Be Secure And Have Zero Movement When The Gate Swings Open And Closed. The Payment For This Is Lump Sum As Per Item #7 In The Unit Price Schedule. 9. All Stockpile Sites Will Be Surveyed Prior To The Soils Being Placed On Them. The Contractor Shall Confirm Prior To Stockpiling, The Appropriate Surveys Have Been Completed By The County. Upon Completion Of The Soils And Overburden Stripping The Actual Volume Will Be Calculated By Surveying And Plotting The Stockpile Volume. The Method Of Survey / Data Collection Will Be Done By A Geographical Positioning System Or Drone And The Volume Calculated By A 3d Modeling Program Using Tin / Surface Subtraction I.e.: Surface 1- Survey Of Stockpile Site, Surface 2 – Survey Of Stockpile After Completion On Site. Surface 2 – Surface 1 = Volume Of In Place Stockpile. 10. The Contractor May Hire An Independent Professional Engineering Consultant To Verify The Stockpile Volume At Their Cost Should They Wish. In The Event Discrepancy Regarding Finished Quantities Arises, The Stockpile Volume Used By The Independent Professional Engineering Consultant Shall Incorporate A Pre-stockpile Base Or Shall Be Deemed Invalid. The Contractor Shall Smoothly Contour All Stockpiles Such That An Accurate Survey Can Be Performed. All Levelling Efforts Performed On The Soils Stockpile Shall Result In Positive Drainage Away From The Stockpile. 11. All Finished Overburden Stockpiles Shall Be Stacked To A Height Of No More Than 9.00 Meters (29’6”) 12. All Finished Soil Stockpiles Shall Be Stacked To A Height Of No More Than 6.5meters (21’4”) 13. The County Reserves The Right To Increase Or Decrease The Volume Stripped At Dingman Pit #5 Located At E1/2-32-44-19-w4m At Its Sole Discretion Without Explanation. 14. The Contractor Shall Not Park, Encroach, Or Cross The Ember Pipeline With Any Equipment Or Vehicles And Shall Maintain A Minimum Of 2.0m Distance From The Pipeline At All Times. This Distance Shall Be Identified By The County So That Everyone On Site Is Aware Of The Pipeline. Ember Resources Will Be On Site For The Pre-construction Meeting As Well. 15. There Shall Be Access To The Well Site By Ember Resources At All Times And The Road Shall Not Be Blocked By Equipment Or Barriers Restricting Access. 16. All Work Shall Be Limited To The Periods Of 9:00am Sunday To 8:00pm Friday, With Saturday Being A Day Of Rest. Daily Restrictions Shall Further Be 6am To 9pm, Daily Following All Oh&s Regulations For Hours Of Work. 17. The Work In It’s Entirety Shall Be Completed In Full By August 15, 2024. All Work Completed After This Date Will Incur A Penalty Of $1500/site Day. A Site Day Shall Include All Days That The Weather And Site Conditions Permit Work To Be Performed. 18. All Areas In Which The Contractor Will Have Operated During The Project Shall Be Fully Levelled And Left In A Neat And Tidy Manner. This Would Include, But Not Be Limited To: Areas Of Stripping, Stockpiling, Road Construction, Travelled Areas, Fencing Areas And Operation Site. 19. The Contractor Shall Employ And Keep On The Job Sites At All Times That Work Is In Progress Under This Contract, A Competent Person Or Persons Who Shall Give Efficient Supervision To The Stockpiling Operation And All Work On Site, And Who Will Be Able To Receive And Act Upon Directions, Instructions, And Notices Which May Be Given By The County. 20. All Directions, Instructions, And Notices On Behalf Of The County Shall Be Given To The Contractor Or His Supervisor In Writing By The Manager Of Public Works, Or In His Absence, Any Other Authorized Person On His Behalf. 21. The Contractor Shall Keep A Daily Record Of The Work Completed On Site. The Said Daily Record Is Subject To The Approval Of The Manager Of Public Works Or His Designate. The Manager Of Public Works And Designate Shall At All Times Have Access To The Records Of The Contractor, And Shall Have A Reasonable Time At The Commencement Of Each Working Day To Inspect, Survey, Or Do Any Other Thing Necessary To Ensure The Accurate Measurement And Specifications Of The Tender. 22. The Manager Of Public Works Or Any Other Authorized Person Acting On His Behalf Shall At All Times Have Access To The Site, And Stockpiling Operation, And May Give Any Instructions Or Directions He Deems Necessary To Protect The Property Of The County Or Of Others On Or Near The Gravel Pits, And Such Instructions Or Directions Shall Be Binding On The Contractor. The County May Inspect The Worksite And Stockpiling Operation At Any Time. 23. The Contractor Will At All Times Pay, And Be Responsible For All Losses, Claims, Demands, Actions, Suits, Costs, Expenses And Damages Which May Be Incurred By Or By Reason Of Any Action Or Other Proceeding Which Shall Or May Be Brought Or Instituted In Respect Of Injury To Persons Or Damages To Property On Or Near Any Of The Said Gravel Pits Or Stockpiles Arising Out Of The Excavation And Stockpiling Of Soils By The Contractor, Directly Or Indirectly, And The Contractor Shall At All Times Hereafter Save Harmless And Keep Indemnified The County From And Against All Such Losses, Claims, Demands, Actions, Suits, Costs, Expenses And Damages. 24. The Contractor Shall Be Responsible For The Care And Protection Of All Material, And Equipment On The Job Sites, And All Damage To The Said Material And Equipment, Howsoever Caused, Shall Be Made Good At The Expense Of The Contractor. 25. Acceptance Of Stockpiled Soils Shall Take Place When Such Soils Are In Their Final Position And Have Met All The Requirements Of The Contract. 26. The Contractor Shall License All Vehicles And Equipment In Accordance With The Laws Of The Province Of Alberta. 27. The Contractor Shall Dispose Of All Waste Materials Produced By Or Incidental To The Earthworks Operation As Directed By The Manager Of Public Works Or His Designate. Upon Completion Of The Earthworks The Site Is To Be Inspected By A Representative Of The Contractor And The Manager Of Public Works Or His Designate To Ensure The Work Site Is Left In A Condition Satisfactory To The County. 28. The Contractor Will Give The County At Least Two (2) Days’ Notice Of His Intention To Move The Earthworks Operation From The Location. 29. The Contractor Is Responsible For The Overall Safety Of Their Workers. The Contractor Is Responsible To Comply With Applicable Environmental, Health, And Safety Legislation As Applicable In The Province Of Alberta. 30. The Contractor Shall Prepare And Implement An Environmental Construction Operations Plan In Accordance With The Department Manual Entitled “environmental Construction Operations Plan (eco Plan) Framework” Dated July 6. 2020 Version. The Plan Must Be Submitted And Approved By The County Prior To The Contractor Moving Into The Pit. 31. Should This Tender Be Accepted, The Undersigned Agrees To Enter Into A Written Agreement With The County For The Faithful Performance Of The Services Covered By This Tender. 32. The Contractor Shall Note That The Existing Area To Be Stripped Is Not Prone To Groundwater, But That All Material Above The Pitrun Within The Proposed Excavation Area Shown On The Drawing Number Ew01-01-2024 Shall Be Stripped. If Required Dewatering Methods Will Meet All Requirements As Per The Current Code Of Practice For Pits. No Separate Or Additional Payment Will Be Made For Dewatering Operations. Payment For This Work Will Be Considered Incidental To The Unit Price Bid Per Cubic Meter For Material Being Stripped. 33. A Pre-tender Meeting Will Be Held March 27, 2024 At 9:00 A.m. At Dingman Pit #5. Attendance To This Meeting Is Mandatory For Prospective Bidders. Attendance Will Be Taken, And Failure To Attend This Meeting Will Be Cause For The Rejection Of A Tender.