Tenders of Dept Of The Navy Usa

Naval Sea Systems Command (navsea), Norfolk Naval Shipyard (nnsy), Code 410 Intends To Award A Firm-fixed-price Contract For The Support Service To Provide Personnel To Monitor Alarms, Closed Circuit Television (cctv), And Radio Communications Associated With Special Security Missions, As Well As Alarms For Open Storage Secret (oss) Spacesin Accordance With The Draft Statement Of Work Utilizing Policies And Procedures Outlined In Far Part 12 Entitled “acquisition Of Commercial Items” And Far Subpart 13.5 Entitled “simplified Procedures For Certain Commercial Items.”this Version Of The Sow May Not Be The Final Version. please Include A Capabilities Statement And Any Relevant Information/questions. at This Time, It Is Not Known When A Solicitation Will Be Available. However, Nnsy Anticipates Early February 2025.

This Is Not A Solicitation. synopsis product Service Code: 8405 marine Corps Systems Command, Attn: Seal-se-stdz, 2200 Lester Street, Quantico, Va 22134 number And Title Of Document: mil-dtl-20268j(mc), Frame, Cap naics Code: 315210 special Notice: the Marine Corps Systems Command (marcorsyscom) Intends To Draft Specifications And Standards To Accommodate A Variety Of Design Solutions And Processes, And To Encourage A Broad Vendor Base. marcorsyscom Is Preparing Draft Mil-dtl-20268j(mc), Frame, Cap. this Notice Serves As An Invitation For Industry To Review And Provide Comments On The Attached Draft Document During The Review Period. Comments On The Draft May Be Submitted To Usmc_stdz@usmc.mil On The Attached Consolidated Comments Form (ccf) With The Document Number In The Subject Line Prior To The Review Period End Date Of 1/16/25. Comments That Are Not Submitted On The Ccf May Not Be Considered. after This Review Period, The Final Document Will Be Published On Assist Online At Https://quicksearch.dla.mil. this Is Not A Solicitation.

Contact Information|4|n761.37|wra|215-697-2983|ethan.stein@navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement|8|x|||||||| inspection And Acceptance Of Supplies|26|x|||||||||||||||||||||||||| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report Combo Type|source/source|tbd|n00383|tbd|tbd|see Schedule|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| warranty Of Supplies Of A Noncomplex Nature (jun 2003)|6|12 Months|60 Days After Discovery Of Defect||||| equal Opportuity For Workers With Disabilities (jun 2020)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American--balance Of Payments Program (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|12|336413|1250||||||||||| facsimile Proposals (oct 1997)|1|| notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2|x|| this Solicitation Is For The Procurement Of The Following: nsn: 7rh 1560 016996115 Qf nomen: Skin,aircraft qty: 19ea pn: 4a326052-1047 all Contractual Documents (i.e. Contracts, Purchase Orders, Task Ordersdelivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, Or sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To "issue" Contractual Documents Asdetailed Herein. 6arly And Incremental Deliveries Accepted And Preferred

Chief Of Naval Operations (cno) Flag Barge - Sources Sought

Nsn 7r-4420-016670121-rq, Ref Nr 10975b, Qty 5 Ea, Delivery Fob Origin. Navsup Weapon Systems Support (navsup Wss) Philadelphia Intends To Solicit On A Sole Source Basis With Ipt(cage: 4kv02) For The Purchase Of A Spare. Qty: 5,spare Of Nsn 7r 4420 016670121 Rq, Heater,fluid,indust There Are No Drawings/data Available. This Source Is The Original Equipment Manufacturer (oem) And The Only Known Source For Providing Repair Support Of The Above Repair Part. The Government Does Not Own The Data Or The Rights To The Data Needed To Purchase This Part From Additional Sources. All Responsible Sources May Submit A Capability Statement, Proposal, Or Quotation, Which Shall Be Considered By The Agency. Source Approval Statement Applies To This Nsn. The Approved Sources For This Material Are Listed Above And It Is Expected That Award Will Be Made To This Firm. Any Firm Which Is Not Already Approved To Manufacture This Material Must Submit A Source Approval Request, Sar. This Procurement Will Not Be Delayed To Wait For A Sar Approval. Naics Code: 336413

This Is A Sources Sought Notice For Information Only. This Is Not A Request For Quotes/proposals Or An Invitation To Bid. in Accordance With Federal Acquisition Regulation (far) 10.002(b), This Sources Sought Notice Is For Market Research And Information Purposes Only At This Time And Shall Not Be Construed As A Solicitation Or As An Obligation. This Notice Is To Determine The Availability Of Small Businesses (including The Following Subsets, Small Disadvantaged Businesses, Hubzone Firms; Certified 8(a), Service-disabled Veteran-owned Small Business And Woman Owned Small Business) To Provide The Required Services. pearl Harbor Naval Shipyard And Intermediate Maintenance Facility (phnsy & Imf) Is Seeking Sources That Are Interested And Capable Of Performing Maintenance, Repairs And Calibration Services On The Fluke Dsx-80000 Qoi Optical Time-domain Reflectometer (otdr) Per Draft Performance Work Statement (pws) Specifications. the Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 811210 - Electronic And Precision Equipment Repair And Maintenance And The Small Business Size Standard Is $34 Million. The Product Service Code Is J052 - Maint/repair/rebuild Of Equipment—measuring Tools. this Request For Capability Information Does Not Constitute A Request For Proposals. Submission Of Any Information In Response To This Market Survey Is Purely Voluntary. The Government Assumes No Financial Responsibility For Any Costs Incurred. if Your Organization Has The Capability Of Performing These Services, Please Provide The Following Information: 1. Organization Name, Address, Email Address, Website Address, Telephone Number, Size And Type Of Ownership For The Organization, Cage Code, Sam.gov Unique Entity Id; And 2. Tailored Capability Statement Addressing The Particulars Of This Effort, With Appropriate Documentation Supporting Claims Of Organizational And Staff Capability. telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. to Be Evaluated For Technical Merit And Capability, Statements Must Be Received By The Stated Deadline. In Determining Whether Or Not To Compete This Requirement, The Government Has Sole Discretion. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform Requirements In Accordance To The Attached Draft Performance Work Statement Are Invited To Submit A Response To This Sources Sought Notice By 15:00 Hst On 15 January 2025. All Questions And Responses Regarding This Sources Sought Notice Must Be Emailed To The Primary Point Of Contact Below.

Contact Information|4|n722.12|b4d|215-697-2558|jacob.tarlini@navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report Combo||tbd|n00383|tbd|tbd|see Schedule|tbd||||||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| equal Opportuity For Workers With Disabilities (jun 2020)|2||| buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| buy American--balance Of Payments Program (feb 2024)|1|| royalty Information (apr 1984)|1|| annual Representations And Certifications (may 2024)|12|336413|1250||||||||||| facsimile Proposals (oct 1997)|1|| notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2||x| all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders,delivery Orders And Modifications) Related To The Instant Procurement Areconsidered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, Or sent By Other Electronic Commercemethods, Such As Email. The Government's Acceptance Of The Contractor'sproposal Constitutes Bilateral Agreement To "issue" Contractual Documents Asdetailed Herein. \

Contact Information|4|n97113a|feb|717-605-4356|joshua.d.martin76.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| special Shipping And Marking Instructions|6|x|||x||| general Information-fob-destination|1|b| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo)|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|n/a|n/a|tbd|n/a|n/a|n/a|n/a|joshua.d.martin76.civ@us.navy.mil| note For Contractor/administrative Contracting Officer|3|||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| annual Representations And Certifications (may 2024)|13|334514|850|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| rfq Closing Date Has Been Extended Until Cob, 16 Jan 2025. All Other Terms Andconditions Remain Unchanged. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders,delivery Orders And Modifications) Related To The Instant Procurement Areconsidered To Be ""issued"" By The Government When Copies Are Either Depositedin The Mail, Transmitted By Facsimile, Or Sent By Other Electrocommercemethods, Such As Email. The Government's Acceptance Of The Contractor'sproposal Constitutes Bilateral Agreement To ""issue"" Contractual Documents Asdetailed Herein. government Source Inspection Per Far 52.246-2 Is Required. delivery_______________days. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, Or Sent By Other Electronic Commerce Methods, Such As Email. The government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To "issue" Contractual Documents As Detailed Herein. 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture Of The Indicator,humidity . 2. Applicable Documents - Not Applicable 3. Requirements 3.1 Manufacturing And Design - The Indicator,humidity Furnished Under This Contract/purchase Order Shall Meet The Material And Physical Requirements As Specified ;p/n 392010 Indicator, Humidity Holder Mfg. Agm Container Controls Cage Code (08992); . 3.2 Marking - Unless Marking Requirements Are Specified By A Document Or Drawing Cited In This Solicitation All Items Delivered Under This Contract/purchase Order Shall Be Marked And Identified In Accordance With The Applicable Military Standards And specifications As Follows: Mechanical Parts, Assemblies And Equipments - Mil-std-130 Electrical And Electronic Parts - Mil-std-1285, Method 1. Electrical And Electronic Parts And Assemblies Not Covered By Mil-std-1285-use Mil-std-130. Electronic Equipment - Mil-std-454 Requirement Number 67. Electrical Equipment - Mil-p-15024/5 (ships) 3.3 Configuration Control - Mil-std-973 Entitled "configuration Management", Paragraph 5.4.8, Configuration Control (short Form Procedure), Is Hereby Incorporated. The Contractor Shall Submit All Engineering Change Proposals In Accordance With Mil-std-973, paragraph 5.4.8.2 And Appendix D. Requests For Deviations Shall Be Processed In Accordance With Mil-std-973, Paragraph 5.4.8.3 And Appendix E. Requests For Waivers Shall Be Processed In Accordance With Mil-std-973, Paragraph 5.4.8.4 And Appendix E. (original and Two Copies Shall Be Submitted To Contracting Officer, Navicp-mech, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.) 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documents That Are Required By Private Industry In Fulfillment Of Contractual Obligations In Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. They May Be Obtained From The Publishers Of The Applicable Societies. C. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410p, 101 Strauss Avenue Indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contract Number, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: Contracting Officer Navicp-mech Code 87321 5450 Carlisle Pike P.o. Box 2020 Mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered From: Commanding Officer Navicp-mech Code 009 5450 Carlisle Pike P.o. Box 2020 Mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Shall Be Obtained By Submitting A Request On Dd Form 1425 To Navicp-mech. 6.2 Commercial Brand Name Description - This Contract/purchase Order Covers A Commercial Brand Name Description. If An Alternate Item Is Proposed, Submit A Complete Technical Description Of The Item With Your Proposal For The Government's Review To Determine if The Item Meets The Minimum Requirements Of This Contract/purchase Order. p/n 392010 Indicator, Humidity Holder Mfg. Agm Container Controls Cage Code(08992)

Repair Of Nsn: 7r1680011072666 And 7r1620012636733

Tactical Driving Safety And Tactical Combat Casualty Care (tccc) Course