Tenders of Dept Of The Army Usa

Complete Description Will Be Released With Rfq.  Drawing Is A Distro D,.  Vendors Must Be Registered In Jcp To Request Access.  Drawing Link Will Be Provided With Rfq.  Vendors Must Include Cage In "reason For Request" When They Submit Request. glide Ring Accumulator Piston Xp526195-1a Drawing Xp526195 Material = 0811- Graphite Filled Polyester Based Style = Piston Wall Thickness = .219 Cut Type = Angle Width = 2.995 +/-.005 Design Gland Id = 19.620 - 19.625 Gland Width = 3.010    

The U.s. Army Test Measurement Diagnostic Equipment (tmde) Activity, Redstone arsenal, Requests Brand Name Acquisition For Commercial Item Quantity Of One (1) To procure A Virtual Library Tape (vlt) To Include Isanv-2106/l8 Vtl 2106, With integrated Lto 8 Drive, 16gb Cache, Two 1gbe Admin/data Ports, Two Usb3 Ports. 6 bays 3.5&, 2u, Four Open Upgrade Card Slots. Tape Virtualization Suite With Licensing For 2000 Virtual Tapes, Cross-replication Support, 6 Virtual Tape Drives/libraries, Offline archival Support For Tape Libraries With Up To 2 Drives/24 Slots

Master Cam Cnc Software For The Marietta Repair Station W91237-22-q-0164

Please See Solicitation Standard Form 1449 For Full Details. solicitatoin Amended To Add Questions And Answers.

General Requirement:   supply One New 4-wheel Drive Utility Terrain Vehicle (utv) Equipped With No Less Than 999 Cc 4 Cycle Gasoline Liquid Cooled Engine With Electronic Fuel Injection.  the Machine Shall Be 2-wheel And 4-wheel/all Wheel Dive Capable With Hi And Low Ranges For Forward, And At Least One Range For Reverse. Machine Shall Have Independent Front And Rear Suspension, Shaft Drive, And Power Steering.   utv Shall Have Seating For No Less Than Three Passengers.  Occupant Rollover Protection (rops) Shall Meet Applicable Sae Standards, Equipped With Seatbelts And A Cargo Bed. Cargo Bed Shall Be A Minimum Of 36-inch X 54-inch With A Minimum 12-inch Depth.  Payload Capacity Shall Be No Less Than 1000 Lbs., And The Towing Capacity No Less Than 2500 Lbs. With A 2-inch Receiver. Lighting Shall Be Dual Led Headlamps And Dual Led Taillamps.  Utv Shall Be Equipped With Power Steering And Have A Minimum Of 13-inches Of Ground Clearance And A Turn Radius Of Equal To Or Less Than 17-ft. the Machine Shall Be Equipped With The Following Factory Installed Accessories:  hvac To Include Heat And Ac With Defrost.  fully Enclosed Cab With Full Doors, And Full Glass Tip Out Windshield.  4,500lb Winch With Synthetic Rope, Auto-stop, And Wireless Remote.  66-inch Poly Snow Blade With Mounting Hardware. full Body Skid Plates. heavy Duty Front And Rear Brush Guards. delivery: Materials Shall Be Delivered To The Following Address: u.s. Army Corps Of Engineers rd Bailey Lake 1110 Visitor Center Road hanover, Wv 24839 contractor Shall Make Contact With Johnathan Browning, Phone: 304-664-3229, 3 Days Prior To Delivery. a. Working Hours: 0730-1600 Hours Monday Through Friday.  Work May Continue Outside These Times With Permission From The On Site Government Representative. All Work Shall Be Performed During Daylight Hours. Delay Of Work May Occur During Excessive Rainfall Or Wet Periods Due To Access To The Site.  b. Federal Holidays: When One Of The Designated Holidays Falls On A Sunday The Following Monday Is Observed As A Legal Holiday. When A Legal Holiday Falls On A Saturday, The Preceding Friday Is Observed As A Holiday. Work That Interferes With Other Ongoing Functions At The Project Shall Be Scheduled Around Normal Working Hours To Be Approved By Project Manager. Work Shall Be Scheduled Around The Above Listed Federal Holidays Unless Approved In Advance. eleven Federal Holidays Observed Are As Follows: new Years Day (january 1st)             Martin Luther King Day (3rd Monday In January)             President’s Day (3rd Monday In February)             Memorial Day (last Monday In May)             Juneteenth (june 19th)             Independence Day (july 4th)             Labor Day (1st Monday In September)             Columbus Day (2nd Monday In October) veterans Day (november 11th)             Thanksgiving Day (4th Thursday In November)             Christmas Day (december 25th) c.  Access To Work Location:  access To The Work Location Shall Be Through The Main Road Of The Office. d.  contractor And Government Equipment And Supplies the Contractor Shall Furnish All Personnel, Equipment, Transportation, Disposal, Supplies And Materials To Perform The Work.   No Government Equipment Or Supplies Shall Be Used For This Project.