Tenders of Department Of Energy

The Hsr Bpm Cryo-cable Assemblies (cable Assemblies Hereafter) Will Be Procured By Bsa For Installation In The Hadron Storage Ring Of The Eic. The Cable Assemblies Will Be A Part Of The Hsr Cryostat Insulating Vacuum Envelope And Will Be Used To Carry Radio Frequency Electrical Signals From The Interior Vacuum Region Of The Storage Ring Through The Cryostat Insulating Vacuum. amendment No. 1 To Request For Proposal 438478 Shall Be Incorporated Into And Become Part Of This Solicitation By Reference (see Attached Amendment No. 1). amendment No. 2 Torequest For Proposal 438478 Shall Be Incorporated Into And Become Part Of This Solicitation By Reference (see Attached Amendment No. 2). amendment No. 3 Torequest For Proposal 438478 Shall Be Incorporated Into And Become Part Of This Solcitation By Reference. It Includes An Updated Drawing, Clarification Questions And Answers, And Extension Of The Proposal Due Date To July 8, 2024, 4:00pm Est. amendment No. 4 To Request For Proposal 438478 Shall Be Incorporated Into And Become Part Of This Solicitation By Reference. It Includes Clarification Questions And Answers. (see Attached Amendment No. 4). amendment No. 5 To Request For Proposal 438478 Shall Be Incorporated Into And Become Part Of This Solicitation By Reference. It Includes Clarification Question And Answer. (see Attached Amendment No. 5). amendment No. 6 To Request For Proposal 438478 Shall Extend The Proposal Due Date Through July 12, 2024, 4:00pm Est. (see Attached Amendment No. 6). amendment No. 7 To Request For Proposal 438478 Shall Extend The Proposal Due Date Through December 18, 2024, 5:00pm Est. And Revise The Sow, Technical Specification, And Drawings (see Attached Amendment No. 7). amendment No. 8 To Request For Proposal 438478 Shall Extend The Proposal Due Date Through January 31, 2025, 5:00pm Est. And Incorporate Clarification Question And Answer. amendment No. 9 To Request For Proposal 438478 Shall Incorporate Question And Answer. (see Attached Qanda). william Koncelik - Please Copy The Following On All Communication Since I Am Retiring On Friday, December 20, 2024. kevin Kirkendall kkirkenda@bnl.gov phone Number 631-344-4605 carmela Hornbeck chornbeck@bnl.gov Phone Number 631-344-7216

Low To Medium Voltage Switchgear And Transformer Electrical Equipment

Inl Innovation Spotlight Lvdt Intrinsic Temperature Measurement: Revolutionizing Precision Sensing Energy, Department Of, Idaho Active Bid / Owner: Public

Opx+ Device, Router, And Support Program

1 - X-ray Diffractometer. The System Must Meet The Following Minimum Technical Requirements And Capabilities. 1) High Brightness Cu X-ray Source And Solid-state 2d Area Detector. 5kw Or Brighter, Sealed Or Rotating Anode. 2) Automated Or User Interchangeable Optics To Enable The Following X-ray Measurement Types: • Reflected Beam Optics: Bragg-brentano, Parallel Beam, Convergent Spot-focused Beam <500um. • Transmission Beam Optics: Focusing Optics For High Resolution Measurements. 3) Integrated Sample Mounting And Software Integration To Enable The Following: • High-throughput Sample Stage For Min. 96 Well-plate. Software/hardware Automation For Alignment/measurement. • Horizontal Sample Mount For Both High-throughput Stage And Single Sample That Has The Ability To Measure In Both Reflection And Transmission Mode. • Heating Stage With Integrated Temperature Control And Measurement From Room Temperature To 1000c Or Greater. Must Be Compatible With Vacuum, Ambient, Inert And Reactive Gasses, To Include Hydrogen Gas. • Detection And Guidance Features To Ensure Proper Optical Path Accessories Are Installed For The Type Of Measurement Being Performed. • Must Have Automated Beam Alignment. 4) Software Requirements: • Software Must Have A User-friendly Interface, And The Ability To Save Measurement Presets And Set User/administrator Settings As This Tool Will Be Available As A Non-specialist, Multi-user Capability. • Software Must Enable External Scripting (such As Python) For Automating Hardware Sample Positioning And Measurement Controls. • Must Include A Comprehensive Suite Of Data Analysis Capabilities, Including: Rietveld Refinement, Texture Analysis, Whole Pattern Fitting, Peak-fitting, Thin-film Reflectivity Pattern Analysis, And Data Visualization.

Cst Studio Suite Package(nodelock) cst Studio Suite Maintenance Support 1 Year Annual Maintenance (2/15/25-2/14/26) Etc.

Oryx Instrument *no Substitutes*

Technology/business Opportunity Automated High Throughput Screening Platform

Slac National Accelerator Laboratory Is Operated By Stanford University For The Department Of Energy. As A Management And Operating Contractor, Subcontracts Awarded By The Laboratory Are Not Federal Procurements, And Are Not Directly Subject To The Federal Acquisition Regulations In 48 Cfr. Nonetheless, Certain Federal Laws, Executive Orders, And Regulations May Affect Our Doe Approved Purchasing System, As Required By Statute, Regulation, Or Contract Terms And Conditions. amendment 02 the Following Addendum 02 Is Being Issued For The Subject Request For Quotation: 352439_panelframe Questions answers To Questions In Red: will They Be Acceptable With A Mill Finish On Unmachined Surfaces? the Drawing Calls Out Mcmaster-carr 88895k113 Which Is 1/2" Thick Material. The Overall Thickness Of The Part Is 1/2" yes this Addendum Modifies The Request For Quotation And Must Be Acknowledged. Failure To Acknowledge All Addenda Could Make Your Proposal Non-responsive. Please Confirm That The Submitted Proposal Is Not Changed Because Of This Addendum. If Proposal Sent Is Revised Because Of This, Please Submit The Revised Proposal. the Following Changes Are Herby Made To The Appropriate Documents Contained The Above-mentioned Request For Quotation (rfq). All Other Terms And Conditions Of The Rfq Remain The Same. thank You. best, anthony Chin procurement Commodities Team anthonyc@slac.stanford.edu slac National Accelerator Laboratory 2575 Sand Hill Road menlo Park, Ca 94025 amendment 01 the Following Addendum 01 Is Being Issued For The Subject Request For Requisition 352439 drawing For Requestion 352439, Dsg-000077042 Attachment. this Addendum Modifies The Request For Quotation And Must Be Acknowledged. Failure To Acknowledge All Addenda Could Make Your Proposal Non-responsive. Please Confirm That The Submitted Proposal Is Not Changed Because Of This Addendum. If Proposal Sent Is Revised Because Of This, Please Submit The Revised Proposal. the Following Changes Are Hereby Made To The Appropriate Documents Contained In The Above-mentioned Request For Quotation (rfq). All Other Terms And Conditions Of The Rfq Remain The Same. thank You. best, anthony Chin procurement Commodities Team anthonyc@slac.stanford.edu slac National Accelerator Laboratory 2575 Sand Hill Road menlo Park, Ca 94025 the Follow Has Been Attached For You To Complete And Review: (baa) Buy American Act Certification representations & Certifications Rider confirm Attached Slac Terms Are Accepted: Fp Commercial Supplies-services T&cs (august 2023) drawing - Dsg-000077042 required Item(s) Listed Below: qty: 126 - Product Description: Dsg-000077042 Llrf Power Outage Tuner Patch Panel Frame quote Is For Product Only; No On-site Services Permitted. source Selection Will Be Based On Lowest Price And Technically Acceptable Method (lpta). technical Evaluation Criteria Are As Follows: ability To Meet The Following Specs: follow Drawing Dsg-000077042 To Specifications: .xx +/- .01 .xxx +/- .005 please Provide A Price And Lead Time Quotation By Cob 2/6/2025. (15 Days) please Be Advised That The Requirement Was Also Posted On Sam.gov. send Quote To Anthonyc@slac.stanford.edu. the Bid Closing Date For This Requirement Is 2/6/2025. is There Any Room For Additional Discount Such As For Academic, Icpt, Gsa, Or Government Institutions? if Possible, Please Provide A Link To Your Webpage For Published Price List To Substantiate For The Prices Quoted. buy American Act Certification (baa)applies To Awards That Are Over $10,000. representations & Certifications Rider Is Required. Once Completed The Reps And Certs Is Valid For One Year Until Renewal. If You Have Already Completed One Within The Year Please Disregard. Otherwise, Please Complete And Return. all Subcontractors Are Required To Register In The System For Award Management (www.sam.gov). the Resulting Purchase Order Will Be Issued On A Fixed Price Basis.slac National Accelerator Laboratory Terms And Conditions For Fixed Price Commercial Supplies And Services (rev. August 2023) Will Be Made A Part Of The Resulting Order. payment Terms Will Be Net-30 freight Terms Will Be Fob Destination Prepaid And Add you Are Requested To Mark And Identify Proprietary/confidential Information Provided In Response To The Solicitation. contact Me Directly With Any Questions. kind Regards, anthony Chin procurement Commodities Team anthonyc@slac.stanford.edu slac National Accelerator Laboratory 2575 Sand Hill Road menlo Park, Ca 94025

Software Licensing Opportunity Solar Irrigate: Optimizing Agricultural Energy Efficiency With Solar Power