Data Center Tenders

Details: As part of this planning, an operating location (bso) and a technology location (tso) are to be built at the Dresden Neustadt location in order to implement the BSS. the BSO is a standardized pre-planned office building in which the workplaces of the dispatchers are located. The TSO is a standardized pre-planned data center in which the central processing unit of the new digital interlockings is located. The planning of the railway technical equipment of Bso and Tso and the planning of the integration of the buildings into the corresponding Estw or Dstw are planned and coordinated by the specialist planners Lst and Tk. The awarding of the planning services for equipment technology (e.g. Lst, Tk) takes place in separate tenders. The planning of the Bso/tso and the equipment technology including Ktb must be coordinated during the planning process. Scope of services: Planning service phases 1 to 3 (transferred services) Planning service phases 4, 6 and 7 (optional services)

Details: Data On Commercial Motor Carrier (truck And Bus) Insurance Coverage, Costs, And Claims this Is A Request For Information (rfi) Only. this Rfi Is For Information And Planning Purposes Only And Is A Market Research Tool To Determine The Availability And Adequacy Of Sources Prior To Determining The Method Of Acquisition And Possible Issuance Of A Request For Quotation (rfq). This Rfi Does Not Constitute A Solicitation For Bids, Quotations, And Proposals, And Is Not To Be Construed As A Commitment By The Government. The Information Provided Herein Is Subject To Change And In No Way Binds The Government To Solicit For Or Award A Competitive Contract. All Information Submitted In Response To This Announcement Is Voluntary, And The Government Will Not Pay For Information Requested Nor Will It Compensate Any Respondent For Any Cost Incurred In Developing Information Provided To The Government. background john A. Volpe National Transportation Systems Center (“volpe”) In Cambridge, Massachusetts Is Seeking To Identify Potential Sources To Assist The Volpe Center In Conducting Research On Behalf Of The Federal Motor Carrier Safety Administration (fmcsa) Related To Liability Insurance Coverage For Commercial Motor Carriers. As Part Of This Research, The Volpe Center Requires Data On The Following: (1) Truck And Bus Companies’ Liability Insurance Coverage Levels, (2) The Annual Cost Of This Coverage, I.e., Premium Costs, And (3) The Dollar Value Of Liability Claims Paid Under Those Policies. to Adequately Perform This Analysis, The Volpe Center Requires Data That Is At The Lowest Possible Level Of Aggregation, Ideally At The Level Of Individual Carriers, Policies, And Claims. However, Some Level Of Aggregation Is Acceptable If It Still Allows For Analysis Of Measures Of Central Tendency And Dispersion. In Addition, It Would Be Preferred If The Data Was In A Format That Would Allow Truck And Bus Data To Be Analyzed Separately, And Hazmat Versus Non-hazmat Data To Be Analyzed Separately, And For Bus Data To Be Analyzed Separately Dependent On Vehicle Size (greater Or Less Than 16 Person Capacity). Anonymized Data Are Also Acceptable, But It Should Be Possible To Associate The Three Streams Of Data At The Entity Level Using Some Form Of Identifier. the Vendor Will Be Required To Provide Data In Machine-readable Form Such As Csv/xls. Alternatively, The Data Could Be Provided Via An Interactive Dashboard, Provided That The Volpe Center Will Be Able To Download The Data For Use In Perpetuity On Its Own Systems. The Vendor Shall Provide Documentation That Explains How Each Variable Is Defined, The Source For Each Data Item, And The Nature Of Any Recalculations Or Recoding. the Purchase Of This Data Subscription Will Include A Perpetual License To Use This Data In Research And Analysis Activities For All Volpe Center And Fmcsa Staff. interested Vendors May Submit A Sample Image Or Illustration Of The Dataset Or Product That They Can Provide And/or Information About How Previous Clients Have Used Their Data Product For Similar Types Of Research. it Is Estimated That The Data Subscription May Be Purchased And Accessible For Analysis And/or Download By June 1, 2024. interested Contractors Should Submit A Written Capabilities Statement Referencing In Sufficient Detail Their Capability To Meet The Requirements Stated Above. Each Response Shall Reference The Sources Sought Title, Contractor's Name And The Following Contractor Information: point Of Contact (along With Telephone And Email Address) entity Has An Active Unique Entity Id (uei)/cage Code And Has A Current Active Registration In The System For Award Management (sam) At Www.sam.gov entity Does Not Appear On The Excluded Parties List business Size For Naics Code 524298 As Registered In The System For Award Management (sam) And Any Specific Socio-economic Category Of The Entity all Interested Parties Must Respond To This Notice By April 29, 2024 At 5:00pm Est. Responses Must Be Sent Electronically Via Email To The Primary Point Of Contact, Karen Marino At Karen.marino@dot.gov. Telephone Requests Will Not Be Accepted. for Information About The Volpe Center Refer To The Volpe Center Website At Http://www.volpe.dot.gov.

Details: This Market Survey Is Being Conducted By Louisville District Corps Of Engineers To Determine If There Are A Reasonable Number Of Interested Small Business Concerns. If Your Firm Is A Small Business, Certified Hubzone, 8a, Woman-owned Small Business Or Service-disabled Veteran Owned Small Business And You Are Interested In This Project Please Respond Appropriately. this Project Will Be A Design Build (db). project Location: Fort Hunter Liggett, Ca. project Description: This Project Is To Construct A 21,500 Sf Network Enterprise Center (nec) At Fort Hunter Liggett, Ca. Construct A Standard Design Information Systems Facility (isf), Organizational Vehicle Parking, Open Storage Area, And Building Information Systems. The Facility Includes Space For A Command Center For Operations Support With Video Teleconferencing Capability, Administration, Reception, Network Administrators, Operations Floor, Tech Lab, Operations Center, Administrative Offices, Customer Service Center, Technical Assistance For Information Technology, Controlled Humidity Warehouse, Loading Dock With Receiving Zone, Shower/locker Rooms, And Break Rooms. Supporting Facilities Include Utilities, Fire Protection And Alarm Systems, Utility Monitoring Control Systems (umcs) Connection, Uninterrupted Power Supply, Redundant Mechanical And Electrical Systems, Heating And Cooling, And Pavements, Walks, And Curbs. Site Improvements Will Include Site Clearing, Grading, And Landscaping. Low Impact Development Integrated Management Practice Measures Will Be Provided. Measures In Accordance With The Department Of Defense Minimum Antiterrorism For Buildings Standards Will Be Provided. Comprehensive Building And Furnishings Related Interior Design Services In Addition To Access For Individuals With Disabilities Will Be Provided. Heating And Air Conditioning Will Be Provided By Self-contained Systems. Facilities Will Be Designed To A Minimum Life Of 50 Years In Accordance With Dod's Unified Facilities Criteria (ufc) 1-200-02 Including Energy Efficiencies, Building Envelope And Integrated Building Systems Performance. Cooling Is Estimated At 60 Tons For The Facility With An N+1 Redundancy Of Another 60 Tons. Dispose/demolish 2 Buildings At Fort Hunter Liggett, Ca (12,457 Total Sf). contract Duration Is Estimated At 900 Calendar Days. The Estimated Cost Range Is Between $25,000,000 And $100,000,000. Naics Code Is 236220. All Interested Small Businesses, Certified Hubzone, 8a, Woman-owned Small Businesses Or Service-disabled Veteran Owned Small Business Contractors Should Respond To This Survey By Email On Wednesday March 6, 2024, By 12:00 Pm Eastern Time. responses Should Include: 1. Identification And Verification Of The Company’s Small Business Status. 2. Contractor’s Unique Identifier Number And Cage Code(s). 3. Documentation From The Firm’s Bonding Company Showing Current Single And Aggregate Performance And Payment Bond Limits. 4. Descriptions Of Experience – Interested Construction Firms Must Provide No More Than Three (3) Example Projects With Either Greater Than 90 Percent Completion Or Projects Completed In The Past Five (5) Years Where The Interested Firm Served As The Prime Contractor. Each Project Must Include The Name, Title, Project Role, E-mail Address, And Telephone Number Of At Least One Reference. References May Be Used To Verify Project Size, Scope, Dollar Value, Percentages, And Quality Of Performance. Provide Documentation Demonstrating Design Build Experience For Leed Certified Similar Type Buildings, Managing A Design Team, And Managing Multiple Sub-contractors. Demonstrate Experience Includes Self-performing 15% Of The Construction. Example Projects Must Be Of Similar Size And Scope. projects Similar In Scope To This Project Include: New Construction For Information Systems Facility, Network Enterprise Centers, Military Training Centers, Data Centers, Multi-story Office Complexes And Army Reserve Centers. Construction Of Pre-engineered Buildings Does Not Count Toward A Project Of Similar Scope Or Size. projects Similar In Size Will Include: Projects With New Construction Of 12,900 Sf (approximately 60% Of Our Project) Or Greater. based On The Definitions Above, For Each Project Submitted, Include: current Percentage Of Construction Complete And The Date When It Was Or Will Be Completed. size Of The Project (combined Building Sf, Acres Of Construction Site Work, Etc.). scope Of The Project. Include Any Specific Trades, Site Work, Utility Connections, Mechanical Systems, Hvac Commissioning, Roof Systems, Etc. the Dollar Value Of The Construction Contract And Whether It Was Design/bid Or Design/bid/build. whether The Project Was Renovation Or New Construction. identify The Number Of Subcontractors, By Construction Trade, Utilized For Each Project. the Percentage Of Work That Was Self-performed As Project And/or Construction Management Services Or Physical Construction Type Work. small Businesses Are Reminded Under Far 52.219-14, Limitations On Subcontracting; They Must Perform At Least 15% Of The Cost Of The Contract, Not Including The Cost Of Materials, With The Firm’s Own Employees For General Construction-type Procurement. Include The Percentage Of Work That Will Be Self-performed On This Project, And How It Will Be Accomplished. note: Total Submittal Package Shall Be No Longer Than 8 Pages. Please Only Include A Narrative Of The Requested Information; Additional Information Will Not Be Reviewed. email Your Response To Sfc Kyle Tate At Kyle.g.tate@usace.army.mil. This Is Not A Request For Proposal And Does Not Constitute Any Commitment By The Government. Responses To This Source Sought Notice Will Be Used By The Government To Make Appropriate Acquisition Decisions. All Interested Sources Must Respond To Future Solicitation Announcements Separately From Responses To This Market Survey. notice: The Following Information Is Provided For Situational Awareness And Is Not Required To Respond To This Sources Sought. all Contractors Must Be Registered In The System For Award Management (www.sam.gov) Prior To Award Of A Contract. All Proposed Contractors Are Highly Encouraged To Review Far Clause 52.232-33 Payments By Electronic Funds Transfer – System For Award Management, Which Indicates “all Payments By The Government Under This Contract Shall Be Made By Electronic Funds Transfer (eft).” Those Not Currently Registered Can Obtain Registration By Going To The Website Http://www.sam.gov. The Process Can Usually Be Completed From 24 To 48 Hours After Submission. Contractors Will Need To Obtain A Unique Entity Identifier (formerly Duns Number) For Processing Their Registration. If You Do Not Already Have A Unique Entity Identifier, One Can Be Obtained From Http://www.sam.gov. Refer To Www.sam.gov For Information Formerly Found In Ccr, Epls, Orca And Fedreg. begin The Registration Process Immediately To Avoid A Delay. alert: You Must Submit A Notarized Letter Appointing The Authorized Entity Administrator Before Your Registration Will Be Activated. This Requirement Now Applies To Both New And Existing Entities. Effective 29 April 2018, The Notarized Letter Process Is Now Mandatory On All Current Registrants At Sam Who Have A Requirement To Update Data On Their Sam Record. The Notarized Letter Is Mandatory And Is Required Before The Gsa Federal Service Desk (fsd) Will Activate The Entity's Registration. effective 29 June 2018, Vendors Creating Or Updating Their Registration Can Have Their Registration Activated Prior To The Approval Of The Required Notarized Letter. However, The Signed Copy Of The Notarized Letter Must Be Sent To The Gsa Federal Service Desk (fsd) Within 30 Days Of Activation Or The Vendor Risks No Longer Being Active In Sam. vendors Can Check Whether An Account Is Active By Performing A Query By Their Cage Or Unique Entity Identifier (known As Duns). The New Registration Process May Now Take Several Weeks, So Vendors Are Highly Encouraged To Begin Registering As Soon As Possible To Avoid Any Possible Delays In Future Contract Awards. Remember, There Is No Cost To Use Sam. To Find Out Additional Information About The Changes Of The Sam Registration Process, Contractors Should Visit The Frequently Asked Questions (faq) Link Located At The Top Of The Sam Homepage (www.sam.gov).

Details: Sources Sought Notice sources Sought Notice page 3 Of 3 sources Sought Notice *= Required Field sources Sought Notice page 1 Of 3 this Sources Sought Notice Is For Planning Purposes Only And Shall Not Be Considered As An Invitation For Bid, Request For Quotation, Request For Proposal, Or As An Obligation On The Part Of The Government To Acquire Any Products And/or Services. Your Response To This Sources Sought Notice Will Be Treated As Information Only. No Entitlement To Payment Of Direct Or Indirect Costs Or Charges By The Government Will Arise Because Of Contractor Submission Of Responses To This Announcement Or The Government Use Of Such Information. This Request Does Not Constitute A Solicitation For Proposals, Quotes, Or The Authority To Enter Negotiations To Award A Contract. the Information Provided May Be Used By The Department Of Veterans Affairs In Developing Its Acquisition Approach, Statement Of Work/statement Of Objectives And Performance Specifications. Interested Parties Are Responsible For Adequately Marking Proprietary Or Competition Sensitive Information Contained In Their Response. The Government Does Not Intend To Award A Contract Based On This Sources Sought Notice Or To Otherwise Pay For The Information Submitted In Response To This Sources Sought Notice. the Submission Of Pricing, Capabilities For Planning Purposes, And Other Market Information Is Highly Encouraged And Allowed Under This Sources Sought Notice In Accordance With (iaw) Far Part 15.201(e). the Purpose Of This Sources Sought Notice Announcement Is For Market Research To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Qualified Service-disabled Veteran Owned Small Businesses, Veteran Owned Small Businesses, 8(a), Hubzone And Other Small Businesses Interested And Capable Of Providing The Products And/or Services Described Below. this Is A "request For Information" Only. Requests For A Solicitation Will Not Receive A Response. the Louis Stokes Cleveland V.a. Medical Center, Cleveland, Ohio. 10701 East Blvd, Cleveland Ohio, 44106 Is Conducting Market Research To Locate Contractors Who Provide Software Management Service (sms) For Bd Alaris Carefusion Pumps. Bd Alaris System Contract Agreement Will Support The Louis Stokes Cleveland Va Medical Center Facility Ongoing Bd Support Services, Alaris Infusion Pump Data Reporting, Software Management And Education And Onsite Clinical Support For New Software Releases. Bd Is Exclusive Manufacturer Of Alarisâ® Products And Software Including Guardrailsâ® Point-of-care Software, Alarisâ® Pump Module, Alarisâ® Syringe Module, Alarisâ® Pca Module And Next Generation Alarisâ® Pc Unit. All Services Provided Would Be Performed In Conformance With The National Fire Protection Agency (nfpa), Occupational Safety And Health Administration (osha), Original Equipment Manufacturer Standards And Specifications And Any Other Authority Having Jurisdiction Over The Va Central Ohio Healthcare System. **please Note This Is Not A New Systems Acquisition. This Is Simply To Provide Software Management Service On Systems Already Owned By The Louis Stokes Cleveland Va Medical Center** the Naics Code Is 811210 - Electronic And Precision Equipment Repair And Maintenance With A Small Business Size Standard Of $34 Million. in Response, Please Provide At Minimum: company Name And Address, poc Information, system For Award Management (sam) Uei Number, socioeconomic Category (sdvosb, Vosb, Wosb, 8a, Small Business Or Large Business). gsa Contract Number If These Services Are Offered On Federal Supply Schedule. must Provide A Capability Statement That Addresses The Organization S Qualifications And Ability To Perform As A Contractor For The Work Described Below. responses To This Sources Sought Must Be In Writing. please Send All Inquiries To: Chad.kemper@va.gov. Phone Calls Will Not Be Accepted. software Management Services performance Work Statement the Purpose Of This Procurement Is To Acquire Infusion Pump Software Management Services (sms) For Use In Northeast Ohio Veterans Healthcare System (cleveland Louis Stokes) Visn 10, Station 541 The Contractor Shall Provide All Software Management Services Required To Maintain And Operate The Alaris Infusion System From Bd (formerly Carefusion) Currently Located At The Northeast Ohio (cleveland) Va. background software Management Services For The Alaris Infusion System Includes Software Enhancements To Server-based Alaris Infusion System Software Components; Services That Include Internet, Webinar And On-site Training And Clinical Education; Support Ranging From Remote Monitoring Of The Alaris Systems Manager To Technical Support For The Alaris Infusion System; And Includes Collection Of Data And Providing Analytics Tools And Services. Software Enhancements Do Not Include Software Updates Or Version Upgrades To Infusion Device Hardware. the Following Components Comprise The Alaris Infusion System Located At Va Northeast Ohio For This Requirement. table 1. Alaris Infusion System Components va Medical Device Nomenclature System (vamdns) Category model infusion Pumps: Multitherapy: Syringe alaris Syr Module 8110 infusion Pumps: Multitherapy alaris Pump Module 8100 infusion Controllers alaris Pc Unit 8015 infusion Pumps: Analgesic: Patient-controlled alaris Pca Module 8120 monitors: Physio: Exhaled Co2: Bedside/intraop alaris Etco2 Module 8300 networked Servers: Medical alaris Systems Manager; Bd Care Coordination Engine software: Medical guardrails Suite Mx; Guardrails Editor; Cqi Reporter; Alaris System Maintenance alaris Pump Modules (module 8110 Syringe, 8100 Multitherapy, Module 8120 Pca, And Module 8300 Co2) Connect To Model 8015 Pc Units. The Infusion Controller Units Connect Wireless To The Va Network And Receive Drug Library Updates From The Alaris Server. The Va Cleveland Hosts The Drug Library, Database, And Server Framework For Visn 10 Sites Ann Arbor, Battle Creek, Cincinnati, Chillicothe, Columbus, Dayton, Detroit, Saginaw, And Cleveland. The Server Also Provides Reports For Pc Units That Are Connected To The Network With The Serial Number Of Connected Modules So That There Is A Pc Unit And Module Inventory Information, Data Set Transfer Status Reports, Communication Event Logs, Reports Of Systems With Communication Errors, And Utilization Trending. Users In The Pharmacy Service Access The Alaris Systems Manager Site On The Server For Utilization Of These Reports And For Customizing The Guardrails Editor And Cqi (continuous Quality Improvement). As The Guardrail Editor Is Updated For Changes To The Drug Library, The Pc Units Download Wirelessly And Update From The Network To Keep An Updated Drug Library In The Pump. The Carefusion Care Coordination Engine Middleware Can Be Used To Interface With An Electronic Health Record With Cleveland Currently In The Preparation And Planning Phases Of Interfacing The Infusion System Via The Carefusion Server For An Eventual Cerner Go-live. alaris Infusion System Description. Infusion System Modules Connect To An Infusion Controller (pcu). The Pcu Connects Wirelessly To The Va Enterprise Network To Transmit And Receive Data To And From The Alaris Systems Manager Server. The Alaris Systems Manager Resides On A Server (virtual Or Physical) In A Va Data Center. Users Will Access The Alaris Systems Manager Server To Manage System Configuration, Retrieve Pump Connectivity Data, Capture Data Analytics, And Upload Infusion Drug Libraries. Users Will Also Access Software Applications Such As Guardrails Editor And Cqi Reporter To Manage Drug Library Configuration And Analyze Reports Collected From Infusion Data. Care Coordination Engines Run On Another Server (virtual Or Physical) Residing In A Va Data Center That Allow For The Infusion Devices To Wirelessly Communicate Interoperability Parameters To The Ehr. The Alaris System Maintenance Software Is Utilized During Performance Of Alaris Infusion System Maintenance. the Contractor Shall Provide The Sms Required Under This Contract For The Following Alaris Infusion System Equipment Covered Under This Contract. All Services Performed Shall Support Compatibility With The Current Infusion Equipment. table 2. Supported Alaris Equipment And Software facility Name server/application Name operating System/version vaneohs (cleveland) vhacleappalar2 alaris Systems Manager Vhav10alr windows Server 2016 Standard, Alaris Systems Manager Version 12.1.2 scope Of Work the Contractor Shall Provide Software Management Services For The Alaris Infusion System Server And Software Components Identified In Table 2 Above. The Services Shall Be In Accordance With The Tasks And Deliverables As Described In This Performance Work Statement (pws). For Those Components Of The System Subject To Software Updates, The Contractor Shall Complete All System Enhancements And Patching With Clear Communication And Preparation. The Contractor Shall Communicate All Enhancements And Support Activations Required To Keep The System Running Effectively To The Primary Point Of Contact (poc) Or The Contracting Officer Representative (cor). All Maintenance And Updates Shall Be Scheduled At Least Three (3) Days In Advance With The Cor. information Security Considerations all Va Sensitive Information Shall Be Protected At All Times, In Accordance With Va Local Site Guidelines. The Contractor Shall Report Any Known Or Suspected Security/privacy Incidents, Or Any Unauthorized Disclosure Of Sensitive Information To The Cor. any Wireless Connectivity To The Va Network Must Be Compatible With 802.11b/g/n And Fips 140-2 Compliant. any Remote Service Support Requires A Memorandum Of Understanding/interconnection Security Agreement (mou/isa) With The Va. security Requirements: service & Maintenance Will Follow The Security Requirements As Per Va S Medical Device Protection Program (mdpp) Which Protects Va S Medical Devices Through A Comprehensive Security Initiative That Encompasses Pre-procurement Assessments, Medical Device Isolation Architecture (mdia), Communication, Validation, Scanning, Access Control List Remediation, Patching, And Secure Remote Connectivity. general Security contractors, Contractor Personnel, Subcontractors, And Subcontractor Personnel Shall Be Subject To The Same Federal Laws, Regulations, Standards, And Va Directives And Handbooks As Va And Va Personnel Regarding Information And Information System Security. check - In Requirements the Contractor Must Report To Their Assigned Contact To Sign In Before Work Begins. Upon Completion Of Work, The Contractor Must Report To Their Assigned Contact To Brief Of Work Completed Or Available Staff If Assigned Contact Is Unavailable Concerning Completion Of Service, And Then To Sign Out. At The End Of Each Briefing, Contractor Will And Must Sign Out. system Interconnection any Va External Computer System Interconnections Between Va Systems On The Va Network And Va Business Partner Systems Residing Outside The Va Network Will Require A Signed Memorandum Of Understanding (mou) And Interconnection Security Agreement (isa) Collectively Known As Mou Isa Between The Va And The Va Business Partner. deliverables the Contractor Shall Perform/provide The Following Services: training the Contractor Shall Include On-site Nursing Clinical Support Training For Practice Reinforcement That Can Be Used For Compliance Rounds And Hospital Best Practices. one Time During The Base Year Of The Contract Period And Any Subsequent Option Year, The Contractor Must Provide One Eight (8) Hour Day Of On-site Clinical Consulting At Each Facility For Every 500 Infusion Devices Installed At That Facility. The Training Must Include Nursing Staff Interactions With The Devices And Recommending Improved Practices For Medication Safety. The Cor Will Provide The Contractor With Requested Training Dates For Each Facility During The Base Year Of The Contract And Any Subsequent Option Year. The Contractor Will Work With The Cor In Good Faith To Reasonably Accommodate The Requested Training Dates. the Contractor Shall Provide A Written Report To Each Facility For Each Practice Reinforcement Visit. the Contractor Shall Include A Workshop With Clinical Peers To Support Customer Adoption Of Cqi Reporter Software And Enhance Interpretation Skills Of Cqi Data. workshop Shall Be For A Period Of 2 Days And Hosted By The Contractor At A Site Within Vaneohs (typically Cleveland) During The Base Year Of The Contract And Each Subsequent Option Year (annually). The Cor Will Provide The Contractor With Requested Workshop Dates For Each Facility During The Base Year Of The Contract And Any Subsequent Option Year. The Contractor Will Work With The Cor In Good Faith To Reasonably Accommodate The Requested Workshop Dates. workshop Shall Cover Defining And Creating A Systematic Approach To Analyzing Guardrails Reporter Software Alerts And Refine Drug Libraries, Dose Limits, And Clinical Advisories To Achieve Maximum Impact For The Organization. the Contractor Shall Provide Access To Online Education. Video Content Must Be Made Available, Upon Request, To Va Education Staff And Allowed To Be Uploaded By The Va To Internal Learning Management Systems. the Contractor Shall Include Suite Training Sessions With Clinical Peers To Refresh Skills On The Use Of Cqi Reporter And Editor Training. The Training Sessions Shall Be Available Monthly And Can Be Used As Needed. the Contractor Shall Provide Tuition Annually For Up To Two (2) Va Representatives To Attend The System Data Workshop. support the Contractor Shall Provide Phone Or Email Access To Highly Qualified Pharmacy Consultants And Clinical Infusion Data Consultants To Address Customer Data Set Questions And Concerns And Assist With The Interpretation Of Cqi Data. The Contractor Shall Provide A Resolution Turnaround Time Of 48 Hours From The Initial Phone Call Or Email Communicating A Customer Issue. the Contractor Shall Provide Access To Qualified Pharmacy Consultants Who Hold The Rph Credential And Have At Least 3 Years Experience Working With Bd Continuous Quality Improvement (cqi) Information To Make Recommendations For Improved Safety Limits On Specific Pharmaceutical Products. the Contractor Shall Provide Access To Clinical Infusion Data Consultants (formerly Cqi Managers) Who Must Have At Least 3 Years Experience Working With Bd Cqi Information To Make Recommendations For Improved Safety Limits On Specific Pharmaceutical Products And Other Data Set Parameters. the Contractor Shall Provide Live Technical Telephone Support With Bd Authorized Support Professionals Who Are Based In The United States. The Team Must Be Ready To Assist And Provide Support For Equipment Covered In This Contract From 8:00am To 7:00pm Eastern Time Zone Monday Through Friday. the Contractor Shall Provide Clinical Infusion Data Consultant Data Support Via Phone Or Email From 8:00am To 7:00pm Eastern Time Zone Monday Through Friday, For Questions Related To The Use Of The Software And Interpretation, Review, And Consulting Of Data. data & Analytics the Contractor Shall Provide Real-time Monitoring Of The Alaris Systems Manager To Ensure System Uptime, Functionality, Optimization, And Health In Accordance With The National Mou/isa Between The Contractor And Va Which Is Made Part Of This Contract And Is Incorporated By Reference Herein. the Contractor Shall Provide Concise, Actionable Information On The Hospital S Infusion Management Practices, Without Requiring Analytical Or Reporting Software Installation Or In-house Technical Resources. This Includes Unlimited Access To A Web-based Portal Defined By Hospital With Benchmarking Tools And The Ability To View All Infusions. The Government Can Request A Quarterly Phone Call Or Report With The Data Analyst To Review The Findings In This Report. the Contractor Shall Provide Benchmarking Tools And The Ability To View All Infusions (not Just Those Outside Of Prescribed Ranges). This Information Must Be Web-based And Be Accessible To An Unlimited Number Of Users Per Hospital. These Services Would Require Hosting On A Vendor Platform But Must Not Contain Any Sensitive Information, In Accordance With The National Mou/isa. software Updates & Maintenance if The Contractor Releases Updates To The Applications Or Server Identified In Table 2 To Enhance The Security Or Operation Of The Software, The Contractor Shall Deliver The Enhancement To The Government In Machine-readable Form With Instructions To Assist The Government With Installing The Enhancement. These Enhancements Will Be Provided To The Government Within 60 Days Of Their Issuance Or Data Of First Commercial Availability, With No Additional Charge To The Government, For Installed Instances Of The Software. As Applicable, The Contractor Will Install Updates Remotely Through The Contractor S Remote Access Solution. The Contractor Shall Use Commercially Reasonable Efforts To Correct Errors In The Software That Materially Affect The Functionality Of The Software. all Labor, Time, Materials, Equipment, Travel, Service Manuals, And Supplies Necessary To Provide The Services Required Under This Contract Shall Be Included In The Contract Price. One Time During Each Annual Period, The Contractor Will Perform One (1) On-site Technical Service Visit For Up To Eight (8) Hours For Each 80 Pc Units To Download Cqi Data And Upload The Government S Drug Library Data Set Onto The Licensed Units. The Contractor Shall Provide Telephone Support To The Government Regarding The Operation Of And Potential Errors In The Software. the Contractor Shall Provide Enhancements To The Guardrails Suite Mx And Guardrails Editor Software When Commercially Available. This Includes Providing Any Updates To The Alaris Systems Manager That Are Required To Install The Newest Version Of Suite Mx Software. the Contractor Shall Provide Alaris Systems Manager Service Patch Management Of The Operating System, Systems Manager Application, And Other Software Components. The Contractor Shall Provide Rigorous Testing Before Deployment Of Software Patches And Updates, Including Customized Patch Cycles And Notifications Options. All Software Patches And Updates Shall Be Provided At No Additional Cost To The Government. Remote Management Of The Server Shall Be Delivered In Accordance With The Most Current Version Of The National Mou/isa Between Va And The Contractor. the Contractor Shall Provide Carefusion Coordination Engine (cce) Service Patch Management Of The Operating System, Cce Application, And Other Software Components. The Contractor Shall Provide Rigorous Testing Before Deployment Of Software Patches And Updates, Including Customized Patch Cycles And Notifications Options. All Software Patches And Updates Shall Be Provided At No Additional Cost To The Government. Remote Management Of The Server Shall Be Delivered In Accordance With The Most Current Version Of The National Mou/isa Between Va And The Contractor. the Contractor Shall Provide Remote Installation Of Server System Patches, Including The Operating System, Alaris Systems Manager, And Other System Components Which Will Be Patched Regularly. software Update/enhancement Installations Shall Normally Be Scheduled And Performed Outside Normal Business Hours, 8:00am To 7:00pm Eastern Time Zone Monday Through Friday, Of Coverage At No Additional Charge To The Government. The Cor May Approve Software Installations Outside Of These Hours To Meet Facility Needs. unscheduled Maintenance (emergency Repair Service) the Contractor S Field Service Engineer (fse) Shall Respond Via Phone Call To The Cor Or His/her Designee Immediately After Receipt Of Telephoned Emergency Repair Service Notification Twenty-four (24) Hours Per Day. If The Problem Cannot Be Corrected By Phone, The Fse Will Commence Work (on-site Or Remote Desktop Response) Within Two (2) Hours After Receipt Of The Notification And Will Proceed Progressively To Completion Without Undue Delay. This Requirement For Response Time Shall Be The Same For Both Service Calls During The Va Normal Business Hours And After-hour Service Calls. The Cor Will Provide The Contractor With (a) An Accurate Description Of The Software Error; (b) The Steps Necessary To Reproduce The Software Error, If Available; (c) If Required, The Data Being Processed At The Time Of The Software Error And Associated Log Files; And (d) The Severity Of The Software Error, Including The Circumstances That Lead To The Software Error. The Cor And The Contractor Will Communicate And Mutually Agree On The Severity Level Of The Software Error In Writing. scheduled Maintenance the Contractor Shall Perform Patches And Enhancements To The Software Components Identified In Table 2 To Ensure The Alaris Infusion System Equipment And Software Perform In Accordance With The Latest Oem Maintenance Procedures And Protocols. Patching Shall Be Provided For All Environments: Pre-production, Production, And Training Environments. Scheduled Software Maintenance Shall Be Scheduled At Least Three (3) Days In Advance With The Cor. An Outline Of The Scheduled Software Maintenance Procedures Shall Be Provided To The Cor. The Contractor Shall Provide And Utilize Procedures And Checklists With Worksheet Originals Indicating Work Performed, As Applicable. This Documentation Shall Be Provided To The Cor At The Completion Of The Scheduled Software Maintenance. The Contractor Shall Provide Written Description Of Scheduled Software Maintenance. This Description Shall Include An Itemized List Of The Procedures Performed. scheduled Software Maintenance Services Shall Include, But Need Not Be Limited To, The Following: reviewing Operating System Software Diagnostics To Ensure That The System Is Operating In Accordance With The Manufacturer S Specifications performing Remedial Software Maintenance Of Non-emergent Nature returning The Equipment To The Operating Condition, Per Oem Standards providing Documentation Of Services Performed the Contractor Shall Perform Scheduled Maintenance Services From 8:00am To 7:00pm Eastern Time Zone Monday Through Friday. All Exceptions To The Scheduled Software Maintenance Schedule Shall Be Arranged And Approved In Advance With The Cor. documentation & Reports the Contractor Shall Provide Written Reports Detailing The Software Management Services Provided Under The Contract. The Documentation Shall Include Detailed Descriptions Of The Scheduled And Unscheduled Software Maintenance (i.e., Emergency Software Repairs (esr)) Procedures Performed, Including Updates And Services Required To Maintain The Software. The Esr Shall Consist Of A Separate Report For The Item(s) Covered Under This Contract. Grouping Reports Of Services Performed Under This Contract With Reports Of Services Performed Under Other Contracts On One Esr Is Prohibited. In Addition, Each Esr Shall, At A Minimum, Document The Following Data Legibly And In Complete Detail: contractor Information: name Of Contractor contract Number name Of Fse Who Performed The Services contractor Service Esr Number/log Number date And Time (starting And Ending), Software Downtime, And Hours On-site For Service Call va Purchase Order Numbers Covering The Call description Of Problem Reported By Cor identification Of Software To Be Serviced: software License And Version Number inventory Id Number manufacturer Name device Name, Model Number, And Serial Number any Other Manufacturer Identification Numbers itemized Description Of Service Performed: labor And Travel software Patches parts (with Part Numbers) location Of Problem/corrective Action total Cost To Be Billed, If Applicable (i.e., Service Rendered After Normal Hours Of Coverage)* signatures: fse Performing Services Described authorized Va Employee Who Witnessed Service Described *any Additional Charges For Work Performed Outside The Scope Of This Contract Shall Be Coordinated With The Co (contracting Officer) And Cor Before Service Is Initiated. payments all Invoices Shall Be Submitted Monthly In Arrears. Invoices Shall Be Properly Prepared In Accordance With Far 52.212-4, Shall Contain Sufficient Detail, Shall Match With The Service Tickets For The Work Rendered, And Shall Match The Contracting Line-item Numbers (clins). Invoices Shall Be Sent Electronically To The Va Financial Services Center For Payment Processing Via Their Electronic E-invoice System. At A Minimum, Invoices Shall Include The Following Details: contract Number purchase Order Number (correct Purchase Order Number Which Will Be Issued By The Contracting Officer After The Contract Is Awarded. Invoices Without Correct Purchase Order Number Shall Be Rejected And Returned To The Contractor.) item(s) Covered (to Include License Numbers) description Of The Services Rendered billing Period In Which The Services Were Rendered invoice Number And Date competency And Certification Of Personnel Servicing Equipment the Contractor Shall Provide Fully Qualified Fses To Perform The Software Maintenance And Repair Services Required Under This Contract. Fully Qualified Is Defined As Having Successfully Completed Oem Training Required For The Software Components Identified In Table 2 Along With Any Associated Equipment. the Fses Shall Be Authorized By The Contractor To Perform The Maintenance Services. All Work Shall Be Performed By Fully Qualified Competent Fses. Upon Request, The Contractor Shall Provide Copies Of All Oem Training Certificates For Fses Showing Types Of Software And Equipment And Dates Of Training For All Software And Equipment Identified To Be Covered. When Deemed Appropriate, The Cor Reserves The Right To Prohibit Contractor Personnel From Working On Vamc Software And Equipment. performance Standards table 3. Performance Standards deliverable reference Paragraph deliverable Description standard performance Threshold method Of Surveillance 3.1 web-based Refresher Training For Infusion Data provided Monthly 90% monthly Surveillance 3.1 one (1) On-site Nursing Clinical Support For Practice Reinforcement For Eight (8) Hours For Each 500 Infusion Units) as Needed 100% periodic Surveillance Of Access 3.2 access To Pharmacy Consultants Via Phone/email as Needed no More Than 1 Instance Of Non-compliance periodic Surveillance Of Access 3.2 live Technical Telephone Support as Needed During Normal Business Hours no More Than 1 Instance Of Non-compliance periodic Surveillance Of Access 3.3 access To Knowledge Portal By All Registered Staff web-based Portal Is Always Accessible 95% periodic Surveillance Of Access By Ce 3.3 infusion Analytics Services data Analysts Are Available Quarterly 100% quarterly Surveillance 3.4 one (1) On-site Technical Service Visit For Up To Eight (8) Hours For Each 80 Pc Units as Needed 100% periodic Surveillance Of Access 3.4 guardrails Suite Mx Software Enhancements updates And Maintenance Are Completed When Commercially Available And Reported To The Cor 95% inspection Of Service Report By The Cor 3.4 server Patches And Updates patch Management Is Completed Regularly, Documented, And Reported To The Cor 95% inspection Of Service Report By The Cor 3.4.1 technical Support For Emergency Repair Service immediate Response With Work Commencement Within Two (2) Hours Of Notification By Fse 100% inspection Of Service Report By The Cor 3.5 documentation & Reports all Sms Activities Are Documented And Reported To The Cor 100% inspection Of Report By The Cor performance Period the Period Of Performance (pop) Shall Be For 8/14/2024 8/13/2025 normal Hours Of Work Are Defined As Monday Through Friday From 8:00am To 7:00pm Excluding Federal Holidays Or As Otherwise Arranged With The Cor. there Are Eleven (11) Federal Holidays Set By Law (usc Title 5 Section 6103) That Va Follows: under Current Definitions, Five (5) Are Set By Date: new Year S Day january 1 juneteenth National Independence Day june 19 independence Day july 4 veterans Day november 11 christmas Day december 25 if Any Of The Above Falls On A Saturday, Then Friday Shall Be Observed As A Holiday. Similarly, If One Falls On A Sunday, Then Monday Shall Be Observed As A Holiday. the Other Six (6) Are Set By A Day Of The Week And Month: birthday Of Martin Luther King, Jr. third Monday In January washington S Birthday third Monday In February memorial Day last Monday In May labor Day first Monday In September columbus Day second Monday In October thanksgiving fourth Thursday In November place Of Performance tasks Under This Pws Shall Be Performed Remotely, When Possible. The Contractor Shall Perform On-site Work When Required. Work May Be Performed At Remote Locations Other Than The Contractor S Facilities. If A Problem Requiring Service Cannot Be Resolved Over The Phone Or Remotely, Then An Authorized Contractor S Representative Shall Commence Work On-site Within The Designated Time Identified And Will Proceed Progressively To Rectify The Problem Without Undue Delay Without Any Additional Cost To The Government With Prior Approval By The Cor. table 4. Locations Of Performance facility Name facility Address poc poc Email louis Stokes Cleveland 10701 East Blvd, Cleveland Oh 44016 anthony Lelli anthony.lelli@va.gov akron Community Based Outpatient Clinic Infusion Center 55 W Waterloo Rd, Akron Oh 44319 anthony Lelli anthony.lelli@va.gov

Details: Page 5 Of 8 department Of Veterans Affairs exposure Related Care Transformation (exprt) Center war Related Illness And Injury Study Center, Va- New Jersey Health Care System statement Of Work (sow) 1. Title: Power Bi Reporting & Analytics Services For The Exposure Related Care Transformation Center 2. Purpose: To Procure Services Of A Contractor Who Has Expertise Developing Custom Data Science Applications (visualization/analytics) Using Power Bi. 3. Background: The Exposure Related Care Transformation Center (exprt Center Or Center ) Seeks To Better Understand The Health Effects Of Military Exposures In Veterans Through Research And Specialty Clinical Evaluation. The Center Is Also Charged With Developing And Disseminating High Quality And Accurate Information And Materials (e.g., Best Practices, Syntheses Of Literature, Disease/condition Monitoring, General Educational Content, Etc.) To Various Stakeholders (e.g., Veterans And Their Families, Clinicians And Scientists, Congress, Senior Va Leadership, And The General Public). The Center Is Seeking To Develop Custom Data Visualization/analysis Applications To Facilitate Enhanced Understanding Of Operational And Data Trends In Order To Best Inform Stakeholders As Well As Most Efficiently Align Resources, Funding And Staff Effort. We Expect These Applications Will Be Built Upon A Data Science Framework/platform, Such As Power Bi, That Will Be In Compliance With Va Oit Guidelines And Leverage Other Va Enterprise Software And Hardware Resources. This Will Support The Center S Goal Of Being A Leader And Authority In Military Exposure Concerns. 4. Scope: The Contractor Shall Be Able To Perform A Range Of Data Science Activities Using The Power Bi Platform Including: data Visualization: Create New Custom Applications That Could Visually Display Clinical And Research Data That Includes Graphical User Interfaces And Real-time Updating (e.g., Filtering Datasets, Real-time Plots And Data Trending, Maps, Etc.) data Analysis: Create New Custom Applications That Incorporate Data Analytic Tools (e.g., Filtering, Summary Descriptive Statistics) That Are Incorporated Within And/or Compatible With Parallel Applications. data Synthesis And Dissemination: Work With Smes To Review And Present Data In Accordance With Proposed Requests And Reporting Needs. All Documentation And Products Must Conform To The Requirements Of The Government. Appropriate Examples And Templates Will Be Provided By The Government Upon Request. quality Control And Optimization: Develop And Design Quality Control Procedures, Perform Initial Process And Procedure Testing And Optimization, Perform And Review Ongoing Quality Control Procedures Throughout The Contract Period And Report Results On An Appropriate Schedule As Finalized In The Project Management Plan. 5. Period Of Performance: 02/19/2024 02/18/2025, With Four Option Years. 6. Place Of Performance: The Contract Services And Activities Described Will Take Place Virtually. 7. Tasks task 1: Data Analysis 7.1.1 Analyze Data Collected Through The Exprt Center. 7.1.2 Analyze Data Collected For Other Projects Currently In Development At The Exprt Center. task 2: Data Synthesis And Dissemination 7.2.1 Work With Smes To Review And Present Exprt Center Data. 7.2.2 Work With Smes To Review And Present Data For Other Exprt Center Projects Currently In Development. task 3: Quality Control And Optimization 7.3.1 Submit A Project Management Plan Which Outlines Quality Control And Data Optimization Procedures. travel And Other Direct Costs: N/a personnel: Certain Skilled Experience Professional And/or Technical Personnel Are Essential For Accomplishing The Work To Be Performed. The Contractor Agrees That The Key Personnel Shall Not Be Removed, Diverted, Or Replaced From Work Without Coordination With The Co And Cor. 10. Substitution Of Key Personnel: All Contractor Requests For Approval Of Substitutions Hereunder Shall Be Submitted In Writing To The Cor And The Contracting Officer At Least Thirty (30) Calendar Days In Advance Of The Effective Date, Whenever Possible, And Shall Provide A Detailed Explanation Of The Circumstances Necessitating The Proposed Substitution, A Complete Resume For The Proposed Substitute, And Any Other Information Requested By The Contracting Officer Necessary To Approve Or Disapprove The Proposed Substitution. New Personnel Shall Not Commence Work Until All Necessary Security Requirements, As Defined In Section 15, Have Been Fulfilled And Resumes Provided And Accepted. The Cor And The Contracting Officer Will Evaluate Such Requests And Promptly Notify The Contractor Of Approval Or Disapproval In Writing. the Contractor Shall Be Responsible For Managing And Overseeing The Activities Of All Contractor Contracted Personnel, As Well As Sub-contractor Efforts Used In Performance Of This Effort. The Contractor S Management Responsibilities Shall Include All Activities Necessary To Ensure The Accomplishment Of Timely And Effective Support, Performed In Accordance With The Requirements Contained Herein.

Details: Description Supply, Delivery And Installation Of One (1) Lot Air Quality Monitoring Station With Testing And Commissioning Specifications: General: Particulate Matter 10- Micron (pm10) Analyzer – Continuous Monitor Must Be Listed In The United States Environmental Protection Agency (usepa) “list Of Designated Reference And Equivalent Method” Issued Last December 15, 2023. Range: 0 - 10.000 Mg/m3 (0 – 10,000 Μg/m3) Accuracy: Exceeds Us-epa Class Iii Pm2.5 Fem Standards For Additive And Multiplicative Bias Lower Detection Limit: < 4.8 Μg/m3 (2σ) (1 Hour) Lower Detection Limit: < 1.0 Μg/m3 (2σ) (24 Hour) Measurement Cycle Time: 1 Hour Flow Rate: 16.67 Liters/minute Operating Temp. Range: 0° To +50°c Ambient Humidity Range: 0 To 90% Rh, Non-condensing Humidity Control: Actively Controlled Inlet Heater Module Standard User Interface: Touch Screen Display (color Graphics) Analog Output: Two Channels; 0-1, 0-2.5, 0-5 Vdc Serial Interface: Full Duplex Rs-232 Half Duplex Rs-485 Serial Port For Pc Or Modem Communications Usb Type B Serial Port Ethernet Portrs-485 Serial Ports For Sensor Network Error Reporting: User-configurable, Available Through Serial Port, Display, And Relay Outputs Power Supply: 100-240 Vac 50/60 Hz Universal Input Pm10 Size Selective Inlet Head, Epa Specified Atmospheric Temperature / Barometric Pressure And Relative Humidity Sensor Eight Feet (8’) Standard Inlet Tube Inlet Support (tripod/strut) Inlet Roof Top Flange With Tube Sealing Gland Inlet Pipe Insulation Mounting Rack Equip With Power Distribution Unit (pdu) And Capable Of Holding The Weight Of Analyzer And Assure That The Analyzer Is Free From Any Movement All Other Accessories/attachments As Specified By The Analyzer Manual Particulate Matter 2.5- Micron (pm2.5) Analyzer - Continuous Particulate Monitor Must Be Listed In The United States Environmental Protection Agency (usepa) “list Of Designated Reference And Equivalent Method” Issued Last December 15, 2023. Range: 0 - 10.000 Mg/m3 (0 – 10,000 Μg/m3) Accuracy: Exceeds Us-epa Class Iii Pm2.5 Fem Standards For Additive And Multiplicative Bias Lower Detection Limit: < 4.8 Μg/m3 (2σ) (1 Hour) Lower Detection Limit: < 1.0 Μg/m3 (2σ) (24 Hour) Measurement Cycle Time: 1 Hour Flow Rate: 16.67 Liters/minute Operating Temp. Range: 0° To +50°c Ambient Humidity Range: 0 To 90% Rh, Non-condensing Humidity Control: Actively Controlled Inlet Heater Module Standard User Interface: Touch Screen Display (color Graphics) Analog Output: Two Channels; 0-1, 0-2.5, 0-5 Vdc Serial Interface: Full Duplex Rs-232 Half Duplex Rs-485 Serial Port For Pc Or Modem Communications Usb Type B Serial Port Ethernet Portrs-485 Serial Ports For Sensor Network Error Reporting: User-configurable,available Through Serial Port, Display, And Relay Outputs Power Supply: 100-240 Vac 50/60 Hz Universal Input; Pm2.5 Very Sharp Cut Cyclone (vssc), (epa Approved) Atmospheric Temperature / Barometric Pressure And Relative Humidity Sensor Eight Feet (8’) Standard Inlet Tube Inlet Support (tripod/strut) Inlet Roof Top Flange With Tube Sealing Gland Inlet Pipe Insulation Mounting Rack Equip With Power Distribution Unit (pdu) And Capable Of Holding The Weight Of Analyzer And Assure That The Analyzer Is Free From Any Movement All Other Accessories/attachments As Specified By The Analyzer Manual Meteorological Instruments Wind Direction Azimuth: Electrical 0° -357°, Mechanical 0° -360° Threshold: 0.5 Mph (0.22 M/s Linearity: ±1/2% Of Full Scale Accuracy: ±3°, Resolution <0.1 Damping Ratio: Standard 0.6 (magnesium Tail) (meets Epa Specifications) Temperature Range: -50°c To +65°c (-58°f To +149°f Electrical Characteristics Power Requirements: 12 Vdc At 10 Ma, 12 Vdc At 350 Ma For Internal Heater Output Signal: 0-5, 0-2.5 (optional 0-1) Vdc For 0° -360° Finish: Anodized Aluminum Cable & Mounting: Cable Assembly, Cross-arm Assembly Wind Speed Maximum Operating Range: 0-135mph (0-60m/s) Starting Speed: 0.5 Mph (0.22 M/s) Calibrated Range: 0 -112 Mph (0 -50 M/s) Accuracy: ±1% Or 0.15 Mph (0.07 M/s) Resolution Temperature Range: -50°c To +65°c (-58°f To +149°f) Distance Constant: Less Than 5 It (1.5m) Of Flow (meets Epa Specifications) Electrical Characteristics Power Requirements: 12 Vdc At 10 Ma, 12 Vdc At 350 Ma For Internal Heater Output Signal: 11 Volts (pulse Frequency Equivalent To Speed) Output Impedance: 100 Ω Maximum Finish: Clear Anodized Aluminum Cable & Mounting: Cable Assembly, Cross-arm Assembly Rain Gauge Plastic Tip Bucket Funnel Area: 200 Cm Sq Accuracy: +/-1% (0 To 30 Mm/hr) +/-5% (30 To 120 Mm/hr) Switch: Reed Switch Rated At 10 Ma, 28 Vdc (maximum) Operating Temperature: -13°f To 140° F (-25°c To +60°c) Thermostat Set Point For Funnel And Base Heater: 39.92°f (4.4°c) Cable: Signal Cable Assembly, Power Cable Assembly Solar Radiation Sensor Type: Thermopile Pyranometer Wavelength Range: 300-2800 Nm Sensing Method: Black Paint Sensing Plate Sensitivity: 5-15 Mv/kw/m2 Output Accuracy: Approx. ± 3% Response Time: <16 Sec (95%) Zero Offset: <5 W/m2 (temp Changes 5k/h) Non-linearity: <2% (0-1000 W/m2) Azimuth Error: <30 W/m2 (1000 W/m2 Beam @ 80°) Tilt Error: <2% (0-90° 1000 W/m2 Temperature Range: -40°c To +60°c Field Of View: 180° Measurement Range: 0-2000 W/m2 Temperature Dependence: <5% (-10°c To +40°c) Body Material: Aluminum (pbt Cover) Waterproof: Ip67 Cable: 10m Shielded Cable Included, S-vsvc, 0.16in Dia. (4mm)" Translator For Meteorological Instruments Compatible With Meteorological Instruments. Can Be Integrated To The Das. Shelter And Fence Dimension - 3m (l) X 2m (w) X 2.5m (h) - 3000mm (l) X 2000mm (w) X 2500mm (h) - Must Have Anchor Shackles On Corners For Lifting Floor - Thick Stainless Steel Supported By I-beams Capable Of Holding The Weight Of The Whole Shelter - With 300mm (l) X 300mm (w) White Floor Tile - Tile Thickness Is 10mm Roofing - Thick Stainless Steel Plastered With Fiber Matting And Painted With Weatherproof Paint. - All Sample Inlet Flanges Must Be Sealed And Leak Free. Outside Wall - Aluminum Composite Panel - Painted White - With Logo Of Denr And Contact Details Of Emb Region 09 Insulation - Fiber Wool Insulation Door - 900mm (w) X 2000mm (h) - Single Panel Swing Door With Door Rubber, Lock And Hinges (stainless Steel) Air Condition Units - 2 Units Window Type Air Condition With Sequence Timer (1 Active And 1 Standby) - Capable Of Maintaining 20-25 Degree Celsius Of Temperature - Capacity: 1 Hp Each Unit Shelter Footings - 300mm From The Ground - 2 Steps Concrete Platform With Upper Step Leveled On The Shelter’s Casing Threshold Heavy Duty Fence - Fence Height – 2.5 Meters (2500 Mm) - Fence Gate – 900mm (w) X 2000mm (h) With Hinges And Padlock - Cyclone Wire With Perimeter Posts Leveled With The Shelter’s Roofing - Gi Pipe Perimeter Post Capable Of Holding The Weight Of The Fence - Perimeter Post Shall Be Installed With Concrete Foundation At Least 1 Meter In Depth. Closed-circuit Television Camera - Outdoor Unit, Pan-tilt-zoom, High Definition (for Additional Security Purposes) - Shall Be Connected To The Computer With Das - Must Be Able To Show Real-time Video Transmission To The Emb R-09 Data Center Ladder - Made Of Stainless Steel - To Be Located On The Side Of The Shelter Safety Roof Railing - Stainless Steel Retractable Tower With Lightning Arrester Material - Anodized Aluminum Number Of Segments - 4 Segments With Base Footing And Foundation Length Per Segment - Segment 1 – 5 M - Segment 2 – 4 M - Segment 3 – 4 M - Segment 4 – 2 M Maximum Height - 15 Meter Raising System - Manual Hand Crank Lockable Mechanism - Safety Stop Lightning Arrester - Yes - Surge Protection System - Grounding System - Testing And Commissioning Tower Support - Guywire With Capacity To Keep The Tower Straight And Firm During Heavy/strong Wind/typhoons Network Connectivity Internet Service - Shall Have A Minimum Internet Speed Of Not Less Than 50 Mbps To Enable Real-time Transfer Of Data And Remote Access To The Monitoring Station. - Minimum: 2 Years Of Continuous Internet Service. Electricity Electrical Requirement - The Electrical Supply For The Equipment Shall Be Split Into Two Circuits, One For Indoor Equipment And One For Outdoor Equipment. All Circuits Must Be Protected By Earth Leakage Circuit Breaker (elcb) Or Residual Current Device (rcd) - Outlets For The Computer With Das (data Logger), Air Condition Units, Analyzers, Lightings Must Be Of Separate Electrical Lines And Circuit Breakers (cb) - The Contractor Shall Secure The Application Of Electricity Power Meter Uninterrupted Power Supply (ups) - Ups Capable Of Holding The Operation Of Equipment For 2 Hours Shall Be Available During Power Interruption. Maintenance And Calibration For 3 Years Certificate Of Calibration, 2 Year Warranty Certificate On Unit, Parts And Services, Manual, Installation, And All Appurtenances. 3-drawer Cabinet For Storage Of Operations Manual, Spare Parts And Consumable Shall Be Provided. A Computer Chair And Table For The Computer With Das, Monitor, Keyboard And Mouse Shall Be Provided. With Notebook For Data Collection And Data Handling: Specifications: Processor: 13th Generation Intel Core I7-1355u (3.70 Ghz Up To 5.00 Ghz With Intel Turbo Boost Technology, 12 Mb L3 Cache, 10 Cores, 12 Threads), Windows 11 Home - Hp Recommends Windows 11 Pro For Business, Chipset Is Integrated With Processor (intel® Iris® Xᵉ Graphics). Body: Slate Blue - 11.7 X 8.67 X 0.64 In (29.74 X 22.04 X 1.64 Cm), 5mp Mipi-raw Infrared With Camera Privacy Key. Audio: Audio By Bang & Olufsen, Microphone/headphone Combo Audio Jack, Premium Keyboard, Spill-resistant Keypad And Optional Backlit Memory: 32 Gb Lpddr5-4800 Sdram, 512 Gb Pcie® Nvme™ Value M.2 Ssd, With 2 Extra 2tb Nvme External Ssd. Main Camera: 5mp Mipi-raw Infrared With Hp Camera Privacy Key, 5 Mp + Ir Camera For Face Authentication With Windows Hello Display: 34.3 Cm (13.5") Diagonal, Wuxga+ ,uwva Anti-glare, Micro-edge, 1000 Nits, Sure View Integrated Privacy Screen, Edp 1.3+psr, Ambient Light Sensor + Ambient Color Sensor (1920 X 1280) With Eye Ease. Battery: 68whr Long Life Polymer Fast Charge 4 Cell Battery, Fast Charge Support (50% In 30 Mins), Power Managerwith Smart Sense In System Control; Intelligent Hibernate; Oled Power Saving Mode Network And Communication: Intel® Garfield Peak 2 Ax211 Wi-fi 6e + Bluetooth®5.3 M.2 1216 160mhz Cnvi World-wide Wlan Wireless Card, Near Field Communication (nfc) Module Ports/slots: 2 Thunderbolt™ 4 With Usb4 Type-c® 40gbps Signaling Rate (usb Power Delivery, Displayport™ 1.4);1 Superspeed Usb Type-a 5gbps Signaling Rate (charging Port); 1 Headphone/microphone Combo Jack; 1 Hdmi 2.1. ****nothing Follows*******

Details: Description Supply, Delivery And Installation Of One (1) Lot Air Quality Monitoring Station With Testing And Commissioning Specifications: General: Particulate Matter 10- Micron (pm10) Analyzer – Continuous Monitor Must Be Listed In The United States Environmental Protection Agency (usepa) “list Of Designated Reference And Equivalent Method” Issued Last December 15, 2023. Range: 0 - 10.000 Mg/m3 (0 – 10,000 Μg/m3) Accuracy: Exceeds Us-epa Class Iii Pm2.5 Fem Standards For Additive And Multiplicative Bias Lower Detection Limit: < 4.8 Μg/m3 (2σ) (1 Hour) Lower Detection Limit: < 1.0 Μg/m3 (2σ) (24 Hour) Measurement Cycle Time: 1 Hour Flow Rate: 16.67 Liters/minute Operating Temp. Range: 0° To +50°c Ambient Humidity Range: 0 To 90% Rh, Non-condensing Humidity Control: Actively Controlled Inlet Heater Module Standard User Interface: Touch Screen Display (color Graphics) Analog Output: Two Channels; 0-1, 0-2.5, 0-5 Vdc Serial Interface: Full Duplex Rs-232 Half Duplex Rs-485 Serial Port For Pc Or Modem Communications Usb Type B Serial Port Ethernet Portrs-485 Serial Ports For Sensor Network Error Reporting: User-configurable, Available Through Serial Port, Display, And Relay Outputs Power Supply: 100-240 Vac 50/60 Hz Universal Input Pm10 Size Selective Inlet Head, Epa Specified Atmospheric Temperature / Barometric Pressure And Relative Humidity Sensor Eight Feet (8’) Standard Inlet Tube Inlet Support (tripod/strut) Inlet Roof Top Flange With Tube Sealing Gland Inlet Pipe Insulation Mounting Rack Equip With Power Distribution Unit (pdu) And Capable Of Holding The Weight Of Analyzer And Assure That The Analyzer Is Free From Any Movement All Other Accessories/attachments As Specified By The Analyzer Manual Particulate Matter 2.5- Micron (pm2.5) Analyzer - Continuous Particulate Monitor Must Be Listed In The United States Environmental Protection Agency (usepa) “list Of Designated Reference And Equivalent Method” Issued Last December 15, 2023. Range: 0 - 10.000 Mg/m3 (0 – 10,000 Μg/m3) Accuracy: Exceeds Us-epa Class Iii Pm2.5 Fem Standards For Additive And Multiplicative Bias Lower Detection Limit: < 4.8 Μg/m3 (2σ) (1 Hour) Lower Detection Limit: < 1.0 Μg/m3 (2σ) (24 Hour) Measurement Cycle Time: 1 Hour Flow Rate: 16.67 Liters/minute Operating Temp. Range: 0° To +50°c Ambient Humidity Range: 0 To 90% Rh, Non-condensing Humidity Control: Actively Controlled Inlet Heater Module Standard User Interface: Touch Screen Display (color Graphics) Analog Output: Two Channels; 0-1, 0-2.5, 0-5 Vdc Serial Interface: Full Duplex Rs-232 Half Duplex Rs-485 Serial Port For Pc Or Modem Communications Usb Type B Serial Port Ethernet Portrs-485 Serial Ports For Sensor Network Error Reporting: User-configurable, Available Through Serial Port, Display, And Relay Outputs Power Supply: 100-240 Vac 50/60 Hz Universal Input; Pm2.5 Very Sharp Cut Cyclone (vssc), (epa Approved) Atmospheric Temperature / Barometric Pressure And Relative Humidity Sensor Eight Feet (8’) Standard Inlet Tube Inlet Support (tripod/strut) Inlet Roof Top Flange With Tube Sealing Gland Inlet Pipe Insulation Mounting Rack Equip With Power Distribution Unit (pdu) And Capable Of Holding The Weight Of Analyzer And Assure That The Analyzer Is Free From Any Movement All Other Accessories/attachments As Specified By The Analyzer Manual Meteorological Instruments Wind Direction Azimuth: Electrical 0° -357°, Mechanical 0° -360° Threshold: 0.5 Mph (0.22 M/s Linearity: ±1/2% Of Full Scale Accuracy: ±3°, Resolution <0.1 Damping Ratio: Standard 0.6 (magnesium Tail) (meets Epa Specifications) Temperature Range: -50°c To +65°c (-58°f To +149°f Electrical Characteristics Power Requirements: 12 Vdc At 10 Ma, 12 Vdc At 350 Ma For Internal Heater Output Signal: 0-5, 0-2.5 (optional 0-1) Vdc For 0° -360° Finish: Anodized Aluminum Cable & Mounting: Cable Assembly, Cross-arm Assembly Wind Speed Maximum Operating Range: 0-135mph (0-60m/s) Starting Speed: 0.5 Mph (0.22 M/s) Calibrated Range: 0 -112 Mph (0 -50 M/s) Accuracy: ±1% Or 0.15 Mph (0.07 M/s) Resolution Temperature Range: -50°c To +65°c (-58°f To +149°f) Distance Constant: Less Than 5 It (1.5m) Of Flow (meets Epa Specifications) Electrical Characteristics Power Requirements: 12 Vdc At 10 Ma, 12 Vdc At 350 Ma For Internal Heater Output Signal: 11 Volts (pulse Frequency Equivalent To Speed) Output Impedance: 100 Ω Maximum Finish: Clear Anodized Aluminum Cable & Mounting: Cable Assembly, Cross-arm Assembly Rain Gauge Plastic Tip Bucket Funnel Area: 200 Cm Sq Accuracy: +/-1% (0 To 30 Mm/hr) +/-5% (30 To 120 Mm/hr) Switch: Reed Switch Rated At 10 Ma, 28 Vdc (maximum) Operating Temperature: -13°f To 140° F (-25°c To +60°c) Thermostat Set Point For Funnel And Base Heater: 39.92°f (4.4°c) Cable: Signal Cable Assembly, Power Cable Assembly Solar Radiation Sensor Type: Thermopile Pyranometer Wavelength Range: 300-2800 Nm Sensing Method: Black Paint Sensing Plate Sensitivity: 5-15 Mv/kw/m2 Output Accuracy: Approx. ± 3% Response Time: <16 Sec (95%) Zero Offset: <5 W/m2 (temp Changes 5k/h) Non-linearity: <2% (0-1000 W/m2) Azimuth Error: <30 W/m2 (1000 W/m2 Beam @ 80°) Tilt Error: <2% (0-90° 1000 W/m2 Temperature Range: -40°c To +60°c Field Of View: 180° Measurement Range: 0-2000 W/m2 Temperature Dependence: <5% (-10°c To +40°c) Body Material: Aluminum (pbt Cover) Waterproof: Ip67 Cable: 10m Shielded Cable Included, S-vsvc, 0.16in Dia. (4mm)" Translator For Meteorological Instruments Compatible With Meteorological Instruments. Can Be Integrated To The Das. Shelter And Fence Dimension - 3m (l) X 2m (w) X 2.5m (h) - 3000mm (l) X 2000mm (w) X 2500mm (h) - Must Have Anchor Shackles On Corners For Lifting Floor - Thick Stainless Steel Supported By I-beams Capable Of Holding The Weight Of The Whole Shelter - With 300mm (l) X 300mm (w) White Floor Tile - Tile Thickness Is 10mm Roofing - Thick Stainless Steel Plastered With Fiber Matting And Painted With Weatherproof Paint. - All Sample Inlet Flanges Must Be Sealed And Leak Free. Outside Wall - Aluminum Composite Panel - Painted White - With Logo Of Denr And Contact Details Of Emb Region 09 Insulation - Fiber Wool Insulation Door - 900mm (w) X 2000mm (h) - Single Panel Swing Door With Door Rubber, Lock And Hinges (stainless Steel) Air Condition Units - 2 Units Window Type Air Condition With Sequence Timer (1 Active And 1 Standby) - Capable Of Maintaining 20-25 Degree Celsius Of Temperature - Capacity: 1 Hp Each Unit Shelter Footings - 300mm From The Ground - 2 Steps Concrete Platform With Upper Step Leveled On The Shelter’s Casing Threshold Heavy Duty Fence - Fence Height – 2.5 Meters (2500 Mm) - Fence Gate – 900mm (w) X 2000mm (h) With Hinges And Padlock - Cyclone Wire With Perimeter Posts Leveled With The Shelter’s Roofing - Gi Pipe Perimeter Post Capable Of Holding The Weight Of The Fence - Perimeter Post Shall Be Installed With Concrete Foundation At Least 1 Meter In Depth. Closed-circuit Television Camera - Outdoor Unit, Pan-tilt-zoom, High Definition (for Additional Security Purposes) - Shall Be Connected To The Computer With Das - Must Be Able To Show Real-time Video Transmission To The Emb R-09 Data Center Ladder - Made Of Stainless Steel - To Be Located On The Side Of The Shelter Safety Roof Railing - Stainless Steel Retractable Tower With Lightning Arrester Material - Anodized Aluminum Number Of Segments - 4 Segments With Base Footing And Foundation Length Per Segment - Segment 1 – 5 M - Segment 2 – 4 M - Segment 3 – 4 M - Segment 4 – 2 M Maximum Height - 15 Meter Raising System - Manual Hand Crank Lockable Mechanism - Safety Stop Lightning Arrester - Yes - Surge Protection System - Grounding System - Testing And Commissioning Tower Support - Guywire With Capacity To Keep The Tower Straight And Firm During Heavy/strong Wind/typhoons Network Connectivity Internet Service - Shall Have A Minimum Internet Speed Of Not Less Than 50 Mbps To Enable Real-time Transfer Of Data And Remote Access To The Monitoring Station. - Minimum: 2 Years Of Continuous Internet Service. Electricity Electrical Requirement - The Electrical Supply For The Equipment Shall Be Split Into Two Circuits, One For Indoor Equipment And One For Outdoor Equipment. All Circuits Must Be Protected By Earth Leakage Circuit Breaker (elcb) Or Residual Current Device (rcd) - Outlets For The Computer With Das (data Logger), Air Condition Units, Analyzers, Lightings Must Be Of Separate Electrical Lines And Circuit Breakers (cb) - The Contractor Shall Secure The Application Of Electricity Power Meter Uninterrupted Power Supply (ups) - Ups Capable Of Holding The Operation Of Equipment For 2 Hours Shall Be Available During Power Interruption. Maintenance And Calibration For 3 Years Certificate Of Calibration, 2 Year Warranty Certificate On Unit, Parts And Services, Manual, Installation, And All Appurtenances. 3-drawer Cabinet For Storage Of Operations Manual, Spare Parts And Consumable Shall Be Provided. A Computer Chair And Table For The Computer With Das, Monitor, Keyboard And Mouse Shall Be Provided. With Notebook For Data Collection And Data Handling: Specifications: Processor: 13th Generation Intel Core I7-1355u (3.70 Ghz Up To 5.00 Ghz With Intel Turbo Boost Technology, 12 Mb L3 Cache, 10 Cores, 12 Threads), Windows 11 Home - Hp Recommends Windows 11 Pro For Business, Chipset Is Integrated With Processor (intel® Iris® Xᵉ Graphics). Body: Slate Blue - 11.7 X 8.67 X 0.64 In (29.74 X 22.04 X 1.64 Cm), 5mp Mipi-raw Infrared With Camera Privacy Key. Audio: Audio By Bang & Olufsen, Microphone/headphone Combo Audio Jack, Premium Keyboard, Spill-resistant Keypad And Optional Backlit Memory: 32 Gb Lpddr5-4800 Sdram, 512 Gb Pcie® Nvme™ Value M.2 Ssd, With 2 Extra 2tb Nvme External Ssd. Main Camera: 5mp Mipi-raw Infrared With Hp Camera Privacy Key, 5 Mp + Ir Camera For Face Authentication With Windows Hello Display: 34.3 Cm (13.5") Diagonal, Wuxga+ ,uwva Anti-glare, Micro-edge, 1000 Nits, Sure View Integrated Privacy Screen, Edp 1.3+psr, Ambient Light Sensor + Ambient Color Sensor (1920 X 1280) With Eye Ease. Battery: 68whr Long Life Polymer Fast Charge 4 Cell Battery, Fast Charge Support (50% In 30 Mins), Power Managerwith Smart Sense In System Control; Intelligent Hibernate; Oled Power Saving Mode Network And Communication: Intel® Garfield Peak 2 Ax211 Wi-fi 6e + Bluetooth®5.3 M.2 1216 160mhz Cnvi World-wide Wlan Wireless Card, Near Field Communication (nfc) Module Ports/slots: 2 Thunderbolt™ 4 With Usb4 Type-c® 40gbps Signaling Rate (usb Power Delivery, Displayport™ 1.4);1 Superspeed Usb Type-a 5gbps Signaling Rate (charging Port); 1 Headphone/microphone Combo Jack; 1 Hdmi 2.1. ****nothing Follows*******

Details: Currently, Around 5,000 Dataport Employees Use More Than 20 Functional Mailboxes And A Variety Of Access To Different Hr Software, As Well As Several Other Sources Of Information. Therefore, Dataport Intends To Introduce Hr Service Delivery Software To Provide Uniform Access To Services, Information And Support For Employees And Managers In The Form Of A Portal (one Stop Shop). By Replacing The Numerous Input Channels, The Aim Is To Reduce Complexity And Improve The Employee Experience. The Aim Is Also To Optimize Service Delivery And Quality. Furthermore, The Automation Potential Of Hr Processes Should Be Exploited. For The “hr Service Delivery” Module From The Manufacturer “servicenow”, The Following Services Are Being Tendered In Two Lots: Lot 1: Consulting Service For Installation And Operation. The Selected Contractor Advises On The Professional Installation Of The Software In The Dataport Data Center As Well As On Subsequent Operation According To The Itl Standard To Ensure The Smooth Process.

Details: Notice Of Intent To Sole Source the Food And Drug Administration Intends To Make A Sole Source Award For A Subscription To Ecig Intelligence, A Comprehensive Source Known For Electronic Nicotine Delivery System (ends) Market Data. The Fdas/center For Tobacco Products Requires This Data To Be Able To Measure And Compare Incidence And Usage Rates, Market Size, Product Form Adoption, Online And Offline Pricing, Distribution Channels, Domestic And Foreign Product And Marketing Regulation, Taxes, And Points Of Contact. Effective Regulation Necessitates A Full Knowledge Of The History And Status Of These Factors And How They Affect The Market Domestically And Internationally. Ecigintelligence Is The Only Source For The Comprehensive Data Needed. we Intend To Make A Sole Source Award For This Subscription To: ecigintelligence 5 St. John’s Lane london Ecim 4bh in Accordance With Far 6.302-1, Only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements. this Notice Of Intent Is Not A Request For Competitive Quotes. However, All Responsible Sources May Submit A Capability Statement Within Five (5) Days After The Publication Of This Synopsis Which Shall Be Considered By The Agency. Responses Received After 5 Days Or Without The Required Information May Not Be Considered. For Information Concerning This Acquisition Contact: nakita Putty contract Specialist nakita.putty@fda.hhs.gov a Determination By The Government Not To Compete Because Of Information Received Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For Determining Whether To Conduct A Competitive Procurement. far Clauses Incorporated By Reference. 52.203-19 – Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) 52.204-23 – Prohibition On Contracting For Hardware, Software And Services Developed Or Provided By Kaspersky Lab And Other Covered Entities (nov 2021) 52.204-25 – Prohibition On Contracting For Certain Telecommunications And Video Surveillance services Or Equipment (nov 2021) 52.222-26 Equal Opportunity (sept 2016) 52.204-27 Prohibition On A Bytedance Covered Application (jun 2023) 52.227-14 Rights In Data – General (may 2014) 52.227-19 – Commercial Computer Software License (dec 2007) 52.232-39 – Unenforceability Of Unauthorized Obligations (jun 2013) 52.232-40 – Providing Accelerated Payment To Small Business Subcontractors (mar 2023) far Provisions Incorporated By Reference 52.203-18 Prohibition On Contracting With Entities That Require Certain Internal Confidentiality Agreements—representation (jan 2017) 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) 52.204-26 Covered Telecommunications Equipment Or Services-representation (oct 2020) 52.212-1 Instructions To Offerors—commercial Products And Commercial Services (sep 2023)

Details: Description May 3, 2024 Request For Quotation No.: 2024-cims(012)-npsvp-0020 Procurement Of Cloud-based Web Application Firewall (waf) Solution (negotiated Procurement – Small Value Procurement) Sir/madam: The Credit Information Corporation Through Credit Information Management Services Invites You To Submit Your Quotation / Offer For The Item/s Described Below Using The Price Proposal Form (see Annex "a") Subject To The Terms And Conditions Stated In The Rfq And Terms Of Reference (see Annex “b”). Qty Uom Particulars Unit Cost (in Php) Approved Budget For The Contract (abc) In Php 1 Lot Procurement Of Cloud-based Web Application Firewall (waf) Solution * With One (1) Website Included * Two (2) Additional Websites * One Hundred Fifty (150) Login Protect Licenses 990,000.00 990,000.00 Contract Duration: One (1) Calendar Year Or May 20, 2025 To May 19, 2025 Delivery Schedule: Thirty (30) Calendar Days Upon Receipt Of Notice To Proceed. Delivery Site: 6f, Exchange Corner Bldg., 107 Va Rufino St. Cor. Esteban St., Legaspi Village, Makati City Submit Your Proposal, Together With The Following Documents, Duly Signed By You Or Your Duly Authorized Representative, Not Later Than May 9, 2024, 5:00 P.m. Philgeps Certificate/number; Mayor’s/business Permit For The Current Year; Latest Income/business Tax Returns; Notarized Omnibus Sworn Statement (annex C); And For Authorized Representatives: Spa (sole Proprietorship/partnership), Secretary’s Certificate Or Board Resolution (corporation). Note: Philgeps Platinum Registration Certificate May Be Submitted In Lieu Of Philgeps Number, And Mayor’s/business Permit For The Current Year Only One (1) Set Of Documents Certified To Be True Copies Of The Original Shall Be Required.  Proposals And Other Documents Required Shall Be Sent Electronically To Procurementunit@creditinfo.gov.ph. Electronically Submitted Proposals And Documents Must Be Submitted On Or Before The Deadline Of Submission As Stated In This Rfq. Upon Determination Of Your Technical, Legal And Financial Eligibility, The Administration Unit Of The Cic Shall Undertake Negotiation With Your Company Based On The Technical Specifications For This Project. Phoebe Ann R. Wagan Administrative Services Officer V Annex "a" Price Proposal Form Date: _________________ Administrative Office Credit Information Corporation 6f, Exchange Corner Bldg., 107 Va Rufino St. Cor. Esteban St., Legaspi Village, Makati City Sir/madam: Having Examined The Request For Quotation No. Rfq No. 2024-cims(012)-npsvp-0020, Which Includes The Technical Specifications, The Receipt Of Which Is Hereby Duly Acknowledged, The Undersigned, Offer To, In Conformity With The Said Request For Quotation For The Sums Stated Hereunder: Qty Uom Particulars Unit Price (in Php) Total Bid Price In Php (inclusive Of Vat) 1 Lot Procurement Of Cloud-based Web Application Firewall (waf) Solution * With One (1) Website Included * Two (2) Additional Websites * One Hundred Fifty (150) Login Protect Licenses Contract Duration: One (1) Calendar Year Or May 20, 2025 To May 19, 2025 Total Bid Price In Words: ______________________________________________________ We Undertake, If Our Proposal Is Accepted, To Deliver The Goods/services As Identified In The Technical Specifications/terms Of Reference And In Accordance With The Delivery Schedule. Our Quotation Includes All Taxes, Duties And/or Levies Payable And Is Valid For A Period Of Thirty (30) Calendar Days Upon Issuance Of This Document. We Understand That The Cic Technical Working Group May Require From Us The Submission Of Documents That Will Prove Our Legal, Financial And Technical Capability To Undertake This Project. Until A Formal Contract Is Prepared And Executed, This Proposal, Together With Your Written Acceptance Thereof And The Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Proposal You May Receive. Dated This ________________. Signature Of Authorized Representative Printed Name Of Authorized Representative Capacity Duly Authorized To Sign Proposal For And On Behalf Of: ___________________ Annex "b" Compliance Form Technical Specifications Procurement Of Cloud-based Web Application Firewall (waf) Solution 1. Overview The Credit Information Corporation (cic) Is Mandated To Collect And Aggregate Borrower’s Credit Data To Establish The Credit Worthiness Of Borrowers. Cic Needs And Uses A Cloud-based Web Application Firewall (waf) Service That Offers Powerful Way To Protect Critical Web Applications Of Cic, And To Efficiently Manage And Optimize Website Performance Where The Submitting Entities (ses) And Accessing Entities (aes) Access The Credit Data And Reports Securely. Cic Uses The Cloud-based Web Application Firewall (waf) Solution With The Following Features And Capabilities: 99.99% Uptime Can Block Over 600 Million Attacks Per Day Enterprise Reporting And Analytics Security At The Speed Of Devops Flexible Deployment Options Use The Web Application Firewall To Secure: Active And Legacy Applications Third-party Applications Apis & Micro Services Cloud Applications, Containers, Virtual Machines And More 2. Purpose The Cic Aims To Renew The Existing Of Existing Cloud-based Waf Solution To Continually Provide A Secure And Easy-to-manage Technology That Integrate With Other Credit Information System (cis) Infrastructure And Systems Of The Cic To Secure, Protect, And Reduce Web Application Risks While Overcoming Its Limited Budget And Man-power Resources. 3. Scope The Paid License Covers To Receive Professional Services, Product Updates And Versions, And Access To Technical Support For One (1) Year. 4. Definition Of Terms Term Definition Cyber Threats In Computer Security, A Threat Is A Potential Negative Action Or Event Facilitated By A Vulnerability That Results In An Unwanted Impact To A Computer System Or Application Ddos In Computing, A Denial-of-service Attack Is A Cyber-attack In Which The Perpetrator Seeks To Make A Machine Or Network Resource Unavailable To Its Intended Users By Temporarily Or Indefinitely Disrupting Services Of A Host Connected To The Internet. Firewall In Computing, A Firewall Is A Network Security System That Monitors And Controls Incoming And Outgoing Network Traffic Based On Predetermined Security Rules. A Firewall Typically Establishes A Barrier Between A Trusted Network And An Untrusted Network, Such As The Internet. Https Hypertext Transfer Protocol Secure (https) Is An Extension Of The Hypertext Transfer Protocol (http). It Is Used For Secure Communication Over A Computer Network, And Is Widely Used On The Internet. In Https, The Communication Protocol Is Encrypted Using Transport Layer Security (tls) Or, Formerly, Secure Sockets Layer (ssl). The Protocol Is Therefore Also Referred To As Http Over Tls, Or Http Over Ssl. Key Exchange Key Exchange (also Key Establishment) Is A Method In Cryptography By Which Cryptographic Keys Are Exchanged Between Two Parties, Allowing Use Of A Cryptographic Algorithm. Multi-factor Authentication (mfa Or Sometimes 2fa) Multi-factor Authentication Is An Electronic Authentication Method In Which A Computer User Is Granted Access To A Website Or Application Only After Successfully Presenting Two Or More Pieces Of Evidence To An Authentication Mechanism: Knowledge, Possession, And Inherence. Service Level Agreement (sla) A Commitment Between A Service Provider And A Client. Particular Aspects Of The Service – Quality, Availability, Responsibilities – Are Agreed Between The Service Provider And The Service User Web Application Firewall A Web Application Firewall Is A Specific Form Of Application Firewall That Filters, Monitors, And Blocks Http Traffic To And From A Web Service. Website A Collection Of Web Pages And Related Content That Is Identified By A Common Domain Name And Published On At Least One Web Server --definitions Are Retrieved From Wikipedia.com, Techopedia.com 5. Duties And Responsibilities 5.1. Service Provider (sp) The Sp’s Responsibilities With Respect To This Project Are As Follows: The Renewal And Installation Of License Must Be Completed Within Thirty (30) Calendar Days From The Receipt Of The Notice To Proceed (ntp). Otherwise, The Sp Shall Pay A Penalty In The Amount Of One Tenth Of One Percent (1/10 Of 1%) Of The Total Contract Price For Every Calendar Day Of Delay. 5.2. Credit Information Corporation Cic’s Responsibilities With Respect To This Project Are As Follows: Grant The Sp’s Authorized Representative Access To Its Premises, Equipment And Facilities Located Therein To Perform Its Obligations, Provided That Such Representative Shall Be Accompanied By The Duly Assigned Personnel Of The Cic Technical Support Department. Secure The Necessary Access Pass And Building Permit Required By The Building Administrator And Assumes Responsibility For The Safe Custody And Use Of The Equipment. Monitor The Provided Services And Verify If The Parameters Under The Service Level Agreement Are Met And Performed By The Sp. Issuance Of A Certificate Of Inspection And Acceptance To The Sp Upon Successful Completion Of The Testing Certifying That The Sp Conforms To All Requirements Stipulated In This Document. Pursuant To General Procurement Policy Board (gppb) Resolution No. 019-2006 Dated 06 December 2006, At The End Of Each Year, The Cic Will Conduct An Assessment Of The Quality Of Service Provided Particularly The Cost Charged By The Sp And The Range Of Services It Offers Against Other Service Providers In The Area. Conducts Assessment/evaluation Of The Sp 60 Days Before The End Of The Contract. 6. Requirements 6.1. General Items Requirements Statement Of Compliance “comply” Or “not Comply” Proof/evidence Of Compliance 1. Service Provider Duly Notarized Statement That The Sp Has Been In Business Of Providing The Cic’s Existing Cloud-based Web Application Firewall Solution For At Least Five (5) Years Prior To The Deadline For The Submission Of Bids. The Sp Must Establish A Single Point Of Contact Call Center Operations/helpdesk With Hotline Numbers To Provide Timely And Responsive Trouble Reporting, Incident Handling, Problem Escalation And Field Support For All Problem Related Issues. The Sp Must Provide Escalation Or Incident Management Procedures, Including The Complete Names Of Contact Persons, Positions, Email Address, Mobile And Landline Numbers. The Sp Shall Inform Cic Of Any Changes On The Escalation Or Incident Management Procedure Immediately. The Sp Should Provide Unlimited Phone, Email, Chat And Any Form Of Electronic Communications And Messaging Support For One (1) Year. 8x5 (monday To Friday) For Local Support, And 24x7 For International Helpdesk Support. The Sp Should Provide A Consumable 8x5 Onsite Support With Next Business Day Response Time For One Year. Four (4) Visits Of Free Onsite Support During The Contract Period. Implement Recommended Remedial Action, Security Updates, System Upgrades As Needed. 2. Service Delivery Manager The Sp Should Assign A Service Delivery Manager (sdm) To Cic For The Project To Ensure All Requirements Of This Contract Are Successfully Delivered To Cic. The Sdm Should Have At Least Two (2) Year Service Delivery Or Project Management Experience In Handling Similar Project Implementation. (provide Curriculum Vitae And Related Certifications.) 3. Technical Support Staff The Sp Should Assign At Least Two (2) Technical Support/engineers To The Cic Project. They Must Be Permanent Employees Of The Service Provider For At Least One And Half (1 ½) Years. (provide Certificate Of Employment, Updated Curriculum Vitae & Related Certifications.) Technical Requirements Items Requirements Statement Of Compliance “comply” Or “not Comply” Proof/evidence Of Compliance System Overview 1. A Cloud-based Web Application Firewall (waf) Service That Offers Powerful Way To Protect Critical Web Applications And Optimize Website Performance. A) Cloud-based Web Application Firewall (waf) With 1 Website Included B) Two (2) Additional Websites C) One Hundred Fifty (150) Login Protect Licenses. D) Coverage Period: May 20, 2024 - May 19, 2024 2. The Solution Must Leverage Accurate Rule-sets To Protect Websites Against Known And Emerging Cyber Threats, Such As Sql Injection, Cross-site Scripting (xss), Spam, Site Scraping, Malicious Bots, And Other Owasp Top Ten Vulnerabilities 3. Ddos Attack Mitigation And Defense For All Types Of Ddos Attacks. 4. Content Delivery Network Function To Improve Website Responsiveness, Lower Web Server Utilization, And Reduces Bandwidth Consumption. The Solution Should Automatically Cache And Serve Website Content From Distributed Data Centers, To Eliminate Bottlenecks At Central Servers, And Ensure That Website Visitor Is Receiving Content From The Data Center With Closest Proximity To Their Geographical Location. 5. Provides Automated Pci Reporting Without Impacting Web Development Processes And Does Not Require In-house Pci Expertise On Involved Pci Consulting Projects. 6. Cloud-based Deployment. 7. Protect Log-in Pages Of Publicly Available Web Applications With Strong Two-factor Authentication Without Integration, Coding Or Software Changes. End User Should Be Able To Manage And Control Multiple Logins Across Several Websites In A Centralized Manner. 8. Two Factor Authentication Is Supported Using Either Email, Sms Or Google Authenticator. 9. The Solution Must Be The Same With The Existing Cloud-based Waf Solution And Login Protect Licenses Of The Cic. 6.3. Service Level Items Requirements Statement Of Compliance “comply” Or “not Comply” Proof/evidence Of Compliance 1. Change Requests Cr Must Be Acknowledged By The Sp Within Two (2) Hours Upon Receipt, Mondays To Fridays, 8:00-5:00 Pm. 2. Incident Response Help-desk Facility Available Twenty-four By Seven (24x7) To Receive Report On Any Issues Incident Response/support Tickets Relayed Through Helpdesk, Email, Phone, Or Instant Messaging Must Be Acknowledged By The Service Provider Within Two (2) Hours Upon Receipt, And C) Resolve Issues Within Six (6) Hours Upon Acknowledgement. 3. Service Report The Sp Must Provide Service Reports For Each Onsite Or Remote Support Service Performed And Shall Be Verified And Acknowledged By Cic Authorized Personnel. The Sp Shall Submit A Detailed Problem Resolution Report For Every Service Requested Within 24 Hours. It Shall Include Details Of Actions Taken In Resolving The Problem Duly Acknowledged By The Authorized Cic Personnel. 7. Schedule Of Delivery The Service Provider Shall Commence Delivery And Implementation Of The Services Within 30 Calendar Days (lead Time For Delivery For Non-stock Items) Upon Receipt Of The Notice To Proceed. 8. Terms Of Payment Payment Shall Be Made On The Following: Payment Shall Be Made On A One Time Basis Subject To Submission Of Billing Statement And Other Supporting Documents By The Service Provider, Subject To The Issuance Of Certificate Of Satisfactory Service By Cic. The Start Of Billing Shall Be Based On The Date Of Issuance Of “certificate Of Acceptance”. Payment Shall Be Subject To The “warranty” Provisions In The Form Of Retention Money In An Amount Equivalent To At Least One Percent (1%) Of The Contract Price Required In Section 62 Of R.a. 9184 And Its Irr. 9. Contract Termination Both Parties Have The Option Or Terminate The Contract Acceptable To Both Parties Based On The Philippine Government Procurement Reform Act And Its Implementing Rules And Regulations, Gppb Guidelines Or Its Issuances, And Other Philippine Laws As Applicable. Pursuant To Annex I Of The 2016 Revised Implementing Rules And Regulations, As Of 15 July 2022, Of The Republic Act No. 9184, The Cic Reserves The Right To Terminate The Procurement Of Cloud-based Web Application Firewall (waf) Solution On The Following Grounds: Termination By Default: Pursuant To Section 68 Of The 2016 Revised Irr, When Outside Of Force Majeure, The Sp Fails To Deliver Or Perform Any Or All Of The Contract Deliverables Within The Period Specified In The Contract, Or Within Any Extension Thereof Granted By The Cic Pursuant To A Request Made By The Sp Prior To The Delay, And Such Failure Amounts To At Least Ten Percent (10%) Of The Contract Price; Pursuant To Section 68 Of The 2016 Revised Irr, The Sp, As A Result Of The Force Majeure, Is Unable To Deliver Or Perform Any Or All Of The Contract Deliverables, Amounting To At Least Ten Percent (10%) Of The Contract Price, For A Period Of Not Less Than Sixty (60) Calendar Days After Receipt Of Notice From The Cic Stating That The Circumstances Of Force Majeure Is Deemed To Have Ceases; Or The Sp Fails To Perform Any Other Obligation Under The Contract. Termination For Convenience, In Whole Or In Part. If The Cic Has Determined The Existence Of Conditions That Make The Contract Implementation Economically, Financially Or Technically Impractical And/or Unnecessary, Such As, But Not Limited To, Fortuitous Event/s Or Changes In Law And National Government Policies. Termination For Insolvency. If The Sp Is Declared Bankrupt Or Insolvent As Determined With Finality By A Court Of Competent Jurisdiction. Termination For Unlawful Acts. In Case It Is Determined Prima Facie That The Sp Engaged, Before Or During The Implementation Of The Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation. Statement Of Compliance Dated This ________________. Signature Of Authorized Representative Printed Name Of Authorized Representative Capacity Duly Authorized To Sign Compliance For And On Behalf Of: ___________________ Annex "c" Omnibus Sworn Statement Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Procurement Agent If Engaged, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Procurement Agent If Engaged, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Procurement Agent If Engaged, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [name Of Bidder] Complies With Existing Labor Laws And Standards; And [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: Carefully Examining All Of The Bidding Documents; Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This __ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ______ . Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Doc. No. ___ Page No. ___ Book No. ___ Series Of ____. Note: “sec. 12. Competent Evidence Of Identity – The Phrase “competent Evidence Of Identity” Refers To The Identification Of An Individual Based On: At Least One Current Identification Document Issued By An Official Agency Bearing The Photograph And Signature Of The Individual, Such As But Not Limited To, Passport, Driver’s License, Professional Regulations Commission Id, National Bureau Of Investigation Clearance, Police Clearance, Postal Id, Voter’s Id, Barangay Certification, Government Service And Insurance System (gsis) E-card, Social Security System (sss) Card, Philhealth Card, Senior Citizen Card, Overseas Workers Welfare Administration (owwa) Id, Ofw Id, Seaman’s Book, Alien Certificate Of Registration/immigrant Certificate Of Registration, Government Office Id, Certification From The National Council For The Welfare Of Disabled Persons (ncwdp), Department Of Social Welfare And Development (dswd) Certification; The Board Resolution Or Secretary’s Certificate Referring To The Said Board Resolution Designating The Bidder’s Authorized Representative And Signatory Need Not Specifically Indicate The Particular Project Where Such Authority Is Given Provided That The Said Authority Covers Activities By Cic.