Crane Tenders

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdg3a 13286 With Available Items Without Traction Motors [06 Nos] [refer Enclosure For The Material Composition].location-diesel Loco Shed Goc. Custodian-sse/diesel Shed/goc. Re-claimable Items - [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Msu Tube, Axle Boxes With Bearings]-6 Sets.[2]hood Lock Assembly - 25 Nos. S.1539 No.738155 Dt.29.11.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Goc)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16457 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete [axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings]- 6 Sets.[2]locomotive Batteries- 8 Nos. S.1539 No.534322 Dt.07.12.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition- [1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [15] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Ernakulam)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11149 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets.[2]head Light -1 Nos S.1539 No.636452 Dt.28.12.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. [15]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed Erode)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 11121 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets. S.1539 No.636451 Dt.28.12.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment.[15]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed Erode)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16405 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete [axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings]- 6 Sets.[2]locomotive Batteries- 8 Nos. S.1539 No.534321 Dt.07.12.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition- [1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [15] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Ernakulam)

Description: The Defense Logistics Agency (dla) Maritime Norfolk At Norfolk Naval Shipyard (nnsy) Intends To Award A Firm Fixed Price (ffp) Single Award Contract For The Items Listed Below. The Award Determination Will Be Lowest Price Technically Acceptable (lpta). The Required Items Are For Commercial Items Prepared In Accordance With The Information In Far Part 13 And Far Subpart 12.6, As Supplemented With The Additional Information Included In This Notice. the Contract Line Items (clins) Are As Follows: clin 0001 qty: 1 Ea part: Lsc Lifting Lug 79lbs 7.975" H X 14.8" Dia Appox. part Number: 6d62305-001 mfg: Northrop Grumman the Requirement Will Be Solicited As Unrestricted, Full And Open Competition. The Naics Code Applicable To This Procurement Is 333923: Overhead Traveling Crane, Hoist, And Monorail System Manufacturing. The Product Service Code 3990, Miscellaneous Materials Handling Equipment. the Anticipated Delivery Date For This Acquisition Is 46 Weeks After Contract Award. The Solicitation, Any Documents Related To This Procurement, And All Amendments Issued Will Be In Electronic Form Only. the Solicitation Number Is Spmym125q0300, And Will Be Available 24 Jan 2025 And Posted To Sam.gov, Https://sam.gov/. Quotes Will Be Due By 9:00 Am Est On 28 Jan 2025. Responses To The Solicitation Notice Shall Be Emailed To The Attention Of Steven Treherne At Steven.treherne@dla.mil. Please Make Sure That The Solicitation Number (spmym125q0300) Is Included In The Subject Line Of Any Email Correspondence. Emails Without Subject Lines Will Not Be Read Because Of Security Issues. potential Offerors Are Hereby Notified That The Solicitation And Any Subsequent Amendments Will Only Be Available By Downloading The Documents At Www.sam.gov (contracting Opportunities). The Government Is Not Responsible For Inability Of The Offeror's To Access Solicitation Documents Posted. No Telephone Or Fax Requests Will Be Accepted, And No Hardcopy Solicitation/amendment Will Be Mailed Or Faxed. all Responsible Sources May Submit A Proposal Which May Be Considered By The Government. By Submitting An Offer, The Offeror Will Be Self-certifying That Neither The Principal Corporate Officials Nor Owners Are Currently Suspended, Debarred, Or Otherwise Ineligible To Receive Contracts From Any Federal Agency. Failure To Do So May Represent Grounds For Refusing To Accept The Proposal. By Submission Of A Proposal, The Offeror Acknowledges The Requirement That A Prospective Awardee Must Be Registered In The System For Award Management (sam) Database Prior To Award, During Performance, And Through Final Payment Of Any Contract Resulting From The Solicitation, Except For Awards To Foreign Vendors For Work To Be Performed Outside The United States. Lack Of Registration In The Sam Database Will Make An Offeror Ineligible For Award. Offerors May Obtain Information On Registration And Annual Confirmation Requirements By Calling 1-866-606-8220, Or Via The Internet At Https://www.sam.gov. All Questions Shall Be Submitted In Accordance With The Solicitation, Dates, And Procedures. Please Direct All Questions Regarding This Requirement To Steven Treherne At Steven.treherne@dla.mil.

Details: Argonne National Laboratory Is Seeking To Source: 2 Each S300 Fapbranded1 s300 Find # D01,d05, And D36 With Attaching Hardware To Install Per Cell. 3 Each S304 Fapbranded1(1) s304 Tie Rod Replacement For Tower Model Nc8407, Find D27. Includes Tie Rods, Cable Ties, And Attaching Hardware To Install Per Cell. 2 Each Me Components Fapbranded1(2) me Components Mia 22&2400gr 364t-365t, Hardware Kits 2 Each Motor Hold-down Hardware Kit B95449 motor Hold-down Hardware Kit For Motor Frame Sizes 324t Thru 365t Used On Nc100 Thru Nc8300 And Av Towers. Kit Includes Stainless S300 Bolts, Washers, Nuts, Shim Set And Loctite Sealer, Per Cell. S300 Spirol Pins For The Geareducer Are Also Included. 2 Each Series 22.1t, 22.2, 22.3, 2200 C24687 series 22.1t, 22.2, 22.3, 2200, 2250 And 2400, Hardware And Shims For Securing Gear Box To Mounting Base. This Kit Also Works For The Series 20, 20t, 20.1, 20.2, 1800 And 2000. 3 Each Imi 685a Mechanical Vibration 2558910 imi 685a Mechanical Vibration Switch, Dpdt, Manual Reset, 30 Foot Cord Set, Factory Calibration (csa/ul Ce) 3 Each Flex Element Kit E48593 flex Element Kit For Mc09 Coupling. Includes Flex Element (tire), Clamp Rings, And Ss Hardware.flex Element Kit For Mc09 Coupling. Includes Flex Element (tire), Clamp Rings, And Ss Hardware. 1 Each Seal Spacer O Ring 210302 seal, Spacer And O-ring Kit For Cell 3 Oil Seal Change 1 Each Labor labor Associated With Installation Of Parts Quoted 4 Each Crane Lift crane Rental Fee 1 Each Angle Modification Labor additional Labor To Install 3x3 Angle Material On Towers For Reinforcement. 3 Each 3x3x72 Angle Fapbranded2 3x3x72¿ Ss 8ga Stiffeners For D01. Includes All Attaching Hardware please See Attached Solicitation Package: 1. Please Remember To Sign Page 1, As Well As Complete Points A-b In Red. 2. Please Remember To Fill Out Your Best And Final Pricing On The Individual Line Item Boxes On Page 2with Firm Fixed-pricing In Us Dollars. please Be Sure Both These Components Are Completed. No Solicitation Will Be Considered Without These Completed. If Any Components Are Missing, Your Solicitation Will Be Discarded. all Forms And Signed Solicitation Have A Requested Completion Date Of 1/28/2025 At 11:30pm Cst. If There Are Any Questions Please Feel Free To Reach Out To Awegrzyn@anl.gov.

Description: This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Information In Far Subpart 12.6, Using Simplified Acquisition Procedures For Commercial Items Found At Far 13.5, As Supplemented With The Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; A Written Solicitation Will Not Be Issued. paper Copies Of This Solicitation Will Not Be Available. This Combined Synopsis/solicitation Shall Be Posted On Sam.gov (https://sam.gov/). The Rfq Number Is N0018925q0081. This Solicitation Documents And Incorporates Provisions And Clauses In Effect Through Fac 2025-03 (effective 17 Jan 2025) And Dfars Publication Notice 20241218 (effective 18 Dec 2024). It Is The Responsibility Of The Contractor To Be Familiar With The Applicable Clauses And Provisions. The Clauses May Be Accessed In Full Text At These Addresses: Https://www.acquisition.gov/far/ And Http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html. the Naics Code Is 532411 And The Small Business Standard Is $45.5m. The Government Intends To Solicit And Negotiate A Firm Fixed Price Contract. Interested Persons May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals. All Bids, Proposals, Or Quotations Received By The Closing Response Date Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. The Small Business Office Concurs With This Determination. this Announcement Will Close At 12:00pm Est On Monday, January 27, 2025. All Responsible Sources May Submit A Quote To Caitlin King Who Can Be Reached Via Caitlin.d.king2.civ@us.navy.mil. Oral Communications Are Not Acceptable In Response To This Notice. All Responsible Sources May Submit A Quote Which Shall Be Considered By The Agency. the Naval Supply Systems Command Fleet Logistics Center, Norfolk Requests Responses From Qualified Sources Capable Of Providing The Following In Support Of The United States Naval Academy. background the U.s. Naval Academy Division Of Water Front Readiness Is Required To Weight Test Their 300 Mt Marine Travel Lift In Accordance With U.s Navy Navfac P-307 Weight Handling Guidelines For Cranes And Equipment To Ensure Safety Among Our Military Personnel, Civilian Employees And Meet Guidelines That Have Been Established. scope contractor Will Provide A Deck Barge That Will Be Used For Weight Testing Purposes Only, The Barge Will Be Placed In Our Basin And Lifted Out Of The Water With Our 300mt Travel Lift And Placed On Our Designated Lift Area To Be Filled With Water And Additional Weight On The Deck If Needed To Get To Our Weight Load Goal Of 726,000 Tons. The Calculation For Water And Additional Weight Load Will Be Determined By The Size And Weight Of The Barge. The Specs For The Barge That Is Required Should Be No More Than 28’wide X 109’long X 10’deep. With Access Ports That Will Allow Us To Fill With Water And Dewater Once Weight Test Is Complete. The Reason We Need A Barge With These Dimensions Is Because Are Basin Is Only 31’10’’ Wide Plus We Have To Take Inconsideration Once The Spreaders From The 300 Mt Marine Travel Lift Are In Place To Lift The Barge They Are 12’’wide Times Two One On Each Side Of The Barge. Barge Must Be Able To Maintain Water Integrity And Be Structural Sound For Lifting Out Of The Water. Barge Must Be Delivered Free Of Any Contaminates That Will Be In Violations Of Epa Laws. 3.0 Tasks contractor Shall Pose At Least The Minimum Qualifications Required By Nationally Acceptable Marine Industry Standards For Certification For The Equipment Being Leased. contractor Shall Provide Current Survey Certifications For The Barge Disclosing All Information. the Contractor Will Deliver The Barge At The Specific Date Established And Pick Up The Barge Once Weight Testing Is Complete. the Contractor Shall Coordinate And Plan Work Sequences As Needed To Complete This Task As Defined With The Gtpoc Before Delivery Takes Place. contractor Will Assure The Barge Is Free Of Any Materials Or Debris Before Delivery Established. contractor Must Inspect Barge Before Turn Over And Upon Completion Of Weight When Once Barge Is Ready To Be Pickup For Any Damages. 4.0 Period Of Performance the Barge Shall Be Delivered And Ready For Weight Test No Later Than February 6, 2024. subject To The Availability Of Funds And Option Exercise, There Are Four (4) Options For This Rental Annually. 5.0 Hours Of Operation work Shall Be Performed During Normal Business Hours. Additional Hours Or Time Came Be Arrange To Accommodate The Contractor. 6.0 Place Of Performance weight Test Shall Be Completed At Water Front Readiness, U.s. Naval Academy. 7.0 Government Tasks: the Government Activity Will Haul The Barge Out Of The Water, Block The Barge, And Provide Water And Electric From The Facility Once Barge Has Been Delivered. the Government Will Fill And Dewater Barge Upon Completion Of Weight Test Certification. the Government Will Furnish Additional Weights And Crane Services. the Government Will Need To Purchase Renters Insurance To Be Liable For Any Damages That Might Occur While Conducting Weight Test Certification To Cover Unforeseen Expenses Related To The Barge. contractor Requirements / Specific Tasks: vendor Shall Pose At Least The Minimum Qualifications Required By Nationally Acceptable Marine Industry Standards For Certification For The Equipment Being Leased. The Vendor Needs To Provide Current Survey Certifications For The Barge Disclosing All Information. the Contractor Will Deliver The Barge At The Specific Date Established And Pick Up The Barge Once Weight Testing Is Complete. the Contractor Shall Coordinate And Plan Work Sequences As Needed To Complete This Task As Defined With The Gtpoc Before Delivery Takes Place. contractor Will Assure The Barge Is Free Of Any Materials Or Debris Before Delivery Established. contractor Must Inspect Barge Before Turn Over And Upon Completion Of Weight When Once Barge Is Ready To Be Pickup For Any Damages. see Attached Combined Synopsis/solicitation Document

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16459 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/ernakulam, Custodian-sse/dsl/ers.re-claimable Items [1]wheel Set Complete [axle,wheel Disc,bull Gear,rsp Tubes, Axle Boxes With Bearings]- 6 Sets.[2]locomotive Batteries- 8 Nos. S.1539 No.534323 Dt.07.12.2024.note-[1]delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition- [1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12]further Stripping Of Sub Assemblies Such As Motors, Alternators, Turbo, Lube Oil Cooler, Compressor, Etc. Should Be Strictly Prohibited In Railway Premises To Prevent Unnecessary Delays And Pollution.[13]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [14] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable.[15]part Delivery Is Not Permitted Against Part Payment.[16]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Diesel Loco Shed Ernakulam)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdg3a 13164 With Available Items [refer Enclosure For The Approximate Weight And Material Composition].location-available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc. Custodian-sse/diesel/goc.re-claimable Items [1] Bkbl-1 No [2] Wheel Set Complete [axle,wheel Disc,bull Gear, Msu Tube, Axle Boxes With Bearings)-6 Sets. S.1539 No.124459 Dt.01.01.2025. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane,only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean,free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment.[15]if Any Hsd Oil/lube Oil Available In Fuel Tank/oil Sump Of The Said Locos, The Same May Be Returned To The Custodian. (location: Available At Mettu Line Behind Iow Office Goc Or Along The Side Of Gsd Goc Machine Siding Line Goc.)