Crane Tenders

Description: Amendment 0002: this Amendment Is To Clarify That Vendor(s) May Provide Alternate Part Numbers For Government Review /consideration And Must Provide Manufacturer Data Sheets If Providing Any Alternate Parts. An Amended Statement Of Work Is Being Added To Include Gfp Information And Gfp Clauses 52.245-1, 252.245-7003, And 252.245-7005 Have Been Added. The Closing Date For This Solicitation Has Been Extended To 1/10/2025. No Other Changes Have Been Made. amendment 0001: this Amendment Is To Include Addtional Draw Ing 3392as1854-2. The Closing Date Of The Solicitation Is Extended To 12/20/2024. No Other Changes Have Been Made. original Posting: n0016425q0018 – Circuit Card Assemblies - Fsg 5998 - Naics 334418 issue Date 14 Nov 2024 – Closing Date 13 Dec 2024 – 4:00 Pm Eastern Time naval Surface Warfare Center (nswc) Crane Has A Requirement For Circuit Card Assemblies In Accordance With The Government’s Associated Drawings And Parts Lists. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via Https://sam.gov. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N0016425q0018 Is Hereby Issued As An Attachment Hereto. contract Opportunities On Https://sam.gov/ Has Officially Replaced Https://beta.sam.gov/ all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor Https://sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. for Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Shelby.j.craig.civ@us.navy.mil all Required Information Must Be Received On Or Before 4:00 Pm Eastern Time.

Description: Naval Surface Warfare Center (nswc) Crane Has A Requirement For Preventative Maintenance On Qfi Microscope, S/n:739 With Four Addition Option Years. the Proposed Contract Action Is For The Supplies Or Services For Which The Government Intends To Solicit And Negotiate With One Source, Quantum Focus Instruments Corporation, 2385 La Mirada Drive, Vista, California 92081, Under The Authority Of Far 13.106-1. This Is Being Sole Sourced Because This Equipment Requires Knowledge Of Proprietary Information Concerning The Design And Functioning Of The Instrument. Only Quantum Focus Instruments, The Manufacturer Of The Equipment, Has Access To This Information And Is The Only Source That Can Provide The Required Service. (insert Brief Basis For Sole Source). All Responsible Sources May Submit A Capability Statement, Which Shall Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via The Internet At Https://sam.gov. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N00164-25-q-0525 Is Hereby Issued As An Attachment Hereto. contract Opportunities On Https://sam.gov/ Has Officially Replaced Fbo.gov all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor https://sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. for Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Morgan.m.helton.civ@us.navy.mil. All Required Information Must Be Received On Or Before 22 Jan 2025 - 2:00 Pm Eastern Time.

Details: N0016425rwp11 – New Manufacturing Of The An/spg-62 Reflector For The Mk-99 Fire Control System psc – 5985 Naics 334511 issue Date: 1/14/25 – Closing Date: 1/29/25 – 3:00 Pm Time Eastern this Effort Was Being Performed Under N0016419dwp49. naval Surface Warfare Center (nswc) Crane 300 Highway 361 Crane, In 47522-5001 Intends To Solicit And Award A Five-year Indefinite Delivery Indefinite Quantity (idiq) Firm Fixed Price (ffp) Full And Open Contract For New Manufacture Of An/spg-62 Reflector (p/n 6778045-50), For The Mk-99 Fire Control System (fcs) For Us Navy And Foreign Military Sales (fms) Customers, With An Estimated Total Of $17m. The Government's Requirement For Award Is A Minimum Of First Articles, Tooling, Or 1 Clin 0003 Repair. First Article Testing Will Be Required If The Requirement Has Not Been Performed In The Last Three (3) Years. Fob Destination Is Crane, In. Fms Items Will Be Fob Origin In Accordance With Dfars Pgi 225.7301(c)(iv). The Government Reserves The Right To Make Multiple Awards From Solicitation # N0016425rwp11. the Following Planned Clin Structure Will Be Utilized To Meet Production, Development, And Repair For The Mk-99 Fcs Spg-62 Reflector Requirement. clin description 0001 first Article 0002 an/spg-62 New Manufacture (usn) 0003 an/spg-62 New Manufacture (fms) 0004 gfe Maintenance/repair (usn) 0005 gfe Maintenance/repair (fms) 0006 gfe Development 0007 data Clin 0008 shipping (fms Clin Only) the Solicitation, All Amendments And Associated Controlled Documents Will Be Posted On Procurement Integrated Enterprise Environment (piee Formerly Known As Wawf) Solicitation Module At Https://piee.eb.mil. The Solicitation Notice Will Flow To Sam.gov, But The Actual Posting Will Be In Piee. The Proposal Shall Also Be Submitted Through The Solicitation Module In Piee. All Changes That Occur Prior To The Closing Date Will Be Posted To Piee On Https://piee.eb.mil. For Within Scope Changes Made After The Closing Date, Only Those Offerors That Provide A Proposal Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award, With An Estimated Award Date Of November 20th, 2025. information Regarding How To Set Up A Vendor Registration Is Included In This Link: Dod Procurement Toolbox Https://dodprocurementtoolbox.com/site-pages/solicitation-module. Choose Vendor Access Instructions. further Training Is Available At This Link: https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 1-866-606-8220 Or Via The Internet At Https://www.sam.gov. contractors Must Also Be Properly Registered The Joint Certification Program (jcp) In Order To Receive The Controlled Attachments. Information About The Jcp Is Located At Https://public.logisticsinformationservice.dla.mil/publichome/jcp/default.aspx. The Controlled Attachments Will Be Posted At The Same Time The Solicitation Is Posted. questions Or Inquiries Should Be Directed To Ragan Gaskill, Code 0241, Telephone 812-227-9663, E-mail Ragan.r.gaskill.civ@us.navy.mil. Please Reference The Above Solicitation Number When Responding To This Notice.

Description: N00164-25-q-0519 - Sole Source - Brand Name Delkin Hard Drives - Psc 5998 - Naics 334412 Issue Date 10 Jan 2025- Closing Date 17 Jan 2025 - 9:00 Am Eastern Time item Description- Naval Surface Warfare Center (nswc) Crane Has A Requirement For Brand Name: Delkin Devices S330 Series Solid State Drives (ssd), 64gb, 2.5" Sata Ssd Industrial Temperature. the Proposed Contract Action Is For The Supplies For Which The Government Intends To Solicit And Negotiate With One Source, Original Equipment Manufacturer (oem), Delkin Devices, Inc. 13350 Kirkham Way, Poway, Ca 92064 And/or Authorized Distributors Under The Authority Of Far 13.106-1. This Is Being Sole Sourced Because This Material Has Been Tested, Accredited, Approved, And Flight Certified For Use By The Oem. All Responsible Sources May Submit A Capability Statement, Which Shall Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. contractors Must Be Properly Registered In The System For Award Management (sam). Offerors May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 866-606-8220 Or Via The Internet At Https://sam.gov. this Solicitation Is Being Issued Pursuant To The Procedures At Far Part 13. Synopsis Exception Far 5.202(a)(13) Applies And Solicitation Number N00164-25-q-0519 Is Hereby Issued As An Attachment Hereto. Contract Opportunities On Https://beta.sam.gov/ Has Officially Replaced Fbo.gov all Changes To The Requirement That Occur Prior To The Closing Date Will Be Posted To Contract Opportunities On Https://beta.sam.gov/. It Is The Responsibility Of Interested Vendors To Monitor Https://beta.sam.gov/ For Any Amendments, Which May Be Issued To This Solicitation. For Changes Made After The Closing Date, Only Those Offerors That Provide A Quote Will Be Provided Any Changes/amendments And Considered For Future Discussions And/or Award. offers Shall Be E-mailed To Alicia.a.dobbyn.civ@us.navy.mil. all Required Information Must Be Received On Or Before 17 Jan 2025 - 9:00 Am Eastern Time.

Description: The Defense Logistics Agency (dla) Maritime Norfolk At Norfolk Naval Shipyard (nnsy) Intends To Award A Firm Fixed Price (ffp) Single Award Contract For The Items Listed Below. The Required Items Are For Commercial Items Prepared In Accordance With The Information In Far Part 13 And Far Subpart 12.6, As Supplemented With The Additional Information Included In This Notice. the Contract Line Items (clins) Are As Follows: clin 0001-43535141 custom Mp72 Pca20240627.220114.v1-b 100 Ton Crane pn# Custom Mp72 Pca20240627.220114.v1-b quantity:1 Ea ordering Data a) Common Nomenclature (commercial Description): Mp Series Mobile Work Platform b) Kind Of Material (i.e., Type, Grade Alternatives, Ete.): Aluminum c) Electrical Data, If Any: Na d) Dimensions, Size, Capacity: Dimensions / Size - See Attached Sheet. Capacity - 300 Pounds e) Principal Of Operation: Platforms Are Rolled Into Place Around Heavy Mobile Equipment To provide Passive Fail Protection. f) Restrictive Environmental Conditions: Must Be Weather Resistant To Support Outdoor operation. Asphalt And Gravel Lots. g) Intended Use (i.e., Location Within Assembly, Essential Operating Conditions, Ete.): key Characteristics: aggressive Nonslip Surface osha Compliant Full-sized Handrails With Toe Boards removable Handrails To Allow Tor Job Specific Reconfiguration 360° Swiveling Easters With Wheels Capable Of Rolling Easily On Asphalt And Gravel foot Operated Wheel Locks Tor Ease Of Set Up corrosion Resistant For Outdoor Use And Storage 3' Wide Platform To Allow Tor Multiple Users lightweight Construction To Allow Tor Movement By A Single User clin 0002-43545140 custom Mp72 Pca20240627. 220114.v1-a 50 Ton Crane pn# Sp-pca20240627.v1a quantity 1 Ea a) Common Nomenclature (commercial Description): Mp Series Mobile Work Platform b) Kind Of Material (i.e., Type, Grade Alternatives, Ete.): Aluminum c) Electrical Data, If Any: Na d) Dimensions, Size, Capacity: Dimensions / Size - See Attached Sheet. Capacity - 300 Pounds e) Principal Of Operation: Platforms Are Rolled Into Place Around Heavy Mobile Equipment To provide Passive Fail Protection. f) Restrictive Environmental Conditions: Must Be Weather Resistant To Support Outdoor operation. Asphalt And Gravel Lots. g) Intended Use (i.e., Location Within Assembly, Essential Operating Conditions, Ete.): key Characteristics: aggressive Nonslip Surface osha Compliant Full-sized Handrails With Toe Boards removable Handrails To Allow Tor Job Specific Reconfiguration 360° Swiveling Easters With Wheels Capable Of Rolling Easily On Asphalt And Gravel foot Operated Wheel Locks Tor Ease Of Set Up corrosion Resistant For Outdoor Use And Storage 3' Wide Platform To Allow Tor Multiple Users lightweight Construction To Allow Tor Movement By A Single User the Requirement Will Be Solicited As A Total Small Business Set Aside. The Naics Code Applicable To This Procurement Is 336214, Travel Trailer And Camper Manufacturing With A Size Standard Of 500. The Product Service Code Is 2020, Travel Trailer And Camper Manufacturing. the Anticipated Delivery Date For This Acquisition Is 30 Days After Contract Award. The Solicitation, Any Documents Related To This Procurement, And All Amendments Issued Will Be In Electronic Form Only. The Solicitation Is Not Yet Available. the Solicitation Number Is Spmym125q0035, And It Is Expected To Be Available On Or About 22 January 2025 And Posted To Sam.gov, Https://sam.gov/ Quotes Will Be Due By 12:00 Pm Est On 28 January 2025. Responses To The Solicitation Notice Shall Be Emailed To The Attention Of Sheree Mcdonnell At Sheree.mcdonnell@dla/mil. Please Make Sure That The Solicitation Number (spmym125q0035) Is Included In The Subject Line Of Any Email Correspondence. Emails Without Subject Lines Will Not Be Read Because Of Security Issues. potential Offerors Are Hereby Notified That The Solicitation And Any Subsequent Amendments Will Only Be Available By Downloading The Documents At Www.sam.gov (contracting Opportunities). The Government Is Not Responsible For Inability Of The Offeror's To Access Solicitation Documents Posted. No Telephone Or Fax Requests Will Be Accepted, And No Hardcopy Solicitation/amendment Will Be Mailed Or Faxed. all Responsible Sources May Submit A Proposal Which May Be Considered By The Government. By Submitting A Quote, The Offeror Will Be Self-certifying That Neither The Principal Corporate Officials Nor Owners Are Currently Suspended, Debarred, Or Otherwise Ineligible To Receive Contracts From Any Federal Agency. Failure To Do So May Represent Grounds For Refusing To Accept The Proposal. By Submission Of A Proposal, The Offeror Acknowledges The Requirement That A Prospective Awardee Must Be Registered In The System For Award Management (sam) Database Prior To Award, During Performance, And Through Final Payment Of Any Contract Resulting From The Solicitation, Except For Awards To Foreign Vendors For Work To Be Performed Outside The United States. Lack Of Registration In The Sam Database Will Make An Offeror Ineligible For Award. Offerors May Obtain Information On Registration And Annual Confirmation Requirements By Calling 1-866-606-8220, Or Via The Internet At Https://www.sam.gov. All Questions Shall Be Submitted In Accordance With The Solicitation, Dates, And Procedures. Please Direct All Questions Regarding This Requirement To Sheree Mcdonnell At Sheree.mcdonnell@dla/mil..

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 14144 With Available Items Without Traction Motors [06 Nos] [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets. S.1539 No.636429 Dt.20.08.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Erode)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16879 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/goc. Custodian- Sse/diesel Shed/goc.re-claimable Items - [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Msu Tube, Axle Boxes With Bearings]- 6 Sets.s.1539 No.738158 Dt.29.11.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Goc)

Description: P.l. No. 98414501 Condemned And Unserviceable Ferrous Cabinets / Frames / Panels With Non-ferrous Attachments Scrap Consisting Of Power Supply Unit, 4/2 Junction Box Without Batteries, 6 Pin Emergency Jocket , Sm's Slide 2 And 12 Way,charger 230v/24v 40amps , Multi Lamp Route Indicator , Ofc Charger,single Phase Starter , Cls Panels, Hub , Surge Monitor,alarm Iti ,voice Multiplex ,test Panel ,cpu Cards , Mux , Precooling Box, Control Gearbox, Ei Charger Box , Metal Detector, Wall Mountable Fms, Control And Relay Panel, Db Box For Fuse And Mcb,lt Switch Board, Screw Jack 25 Ton Panel Board , Traction Transformer Relay Panel ,contol & Relay Panel For 25 Kv Shunt Capacitor Bank , Signal Post Telephone , Rc Panel , Capacitor Bank Panel , Announciator, Smps Charger ,power Control Panel Released From Ac Coaches,rectifiers Without Precooling Transformer , Smps Based Power Plant , Change Over Reset Box ,talkback Master , Fm Tokenless Receiver And Transmitter , Digital Axle Counter , System Service Power Controls , Single Section Digital Axle Counter ,sms Alert System , Mrrms Antenna Assembly , Lcr Rwb Amplifier ,dc-dc Converter , Earth Leakage Detector, , Add On Box, Lc Gate Panel ,sm Slide ,transiiter & Receiver, Vr Box For Ssdac/hassdac , Data Logger , Ips Panel , Ips Asm Panel , Remote Terminal Unit , Control And Relay Panel For 25 Kva Shunt , Transformer Control Panel , Printer Cover Boxes And Relay Racks With Components And Attachments Such As Contactors / Cables Of Copper / Aluminium /cards / Bus Bars / Pcbs / Mcbs / Contacts / Cooling Fans / Terminals / Fuse Units / Jacks / Displays / Lamps / Transformers / Chokes / Switches / Sockets / Meters / Heat Sinks / Connectors / Locks, Plastic And Other Attachments Etc. And Scraps Of Equipments / Devices / Accessories / Machines Such As Tokenless Box Instruments (push Button) Without Relays , Automatic Ticket Vending Machines Without Monitor And Thin Clients ,tokenless Block Instruments (f.m.handle Type), Fm Diode Block Instruments And Other Similar Scraps Of Sorts And Sizes, Intact / Dismantled Condition, Full / Broken / Part, With Ferrous / Copper / Brass /silver / Aluminum / Wood / Other Attachments. Detached Doors & Frames Also Included In Lot. As Is Where Is Condition. Segregation Not Permitted. Cssd/goc Electronic Weigh Bridge To Be Used For Weighment. Note:-1) Material To Be Cleared /delivered As The Following Sequence I.e. First Ssg A) Road Leading From Ssg To Canteen West Of Section No.4. B) Between Tree No.10 And 11. C) Near Tree No 8. 2) Loading By Crane Is Permitted.

Description: 12261ms24i, 98050011, Quantity- 17.320 Mts. Scrap Condemned Unserviceable Ms Bed Plates, Water Tanks And Water Tank Cut Pieces, Ms Path Plates, Foot Path Plates, Sheets, Bin Cut Parts, Rack And Roller Path, Air Tank Cover Parts, Striker Casting Wear Plates, Sliding Doors, Swing Doors, Flap Doors, Ms Chequered Plates, Expansion Tank Parts, Ms Plates, Plate Cuttings, Wagon Doors, Dsl Engine Long Hood, Dummy Bogie Cut Parts, Cast Iron Surface Plates And Base Plates, Axle Counter Ms Frames, Baking Oven Cut Pieces, Ocb Duct, Welding Machine Outer Body, Inverter Empty Body, Tap Changer Ms Spares And Empty Body, Manipulator, Shaping Machine Ms Body, Ms Gates, Collapsible Gates, Base Plate, Short Hood Cabin Cut Parts, Tables, Racks, Lavatory Chute Brackets, Ms Travelling Base, Ms Danger Boards, Radiator Ms Spares, Ms Die Blocks, Ms Body Of Radiator Fan Motor, Capacitor Ms Body, Auxiliary Transformer Ms Empty Body, Ducts, Dust Bin Stand, Ht Load Brake Switch Body, Ms Transformer Body, Ventilator Motor Frames, Transformer Top Plate, Air Receiver, Storage Box Cut Parts, Coach Body Parts, Dust Bins, Lockers, Cattle Guard, Incinerator Chimney Parts, Incinerator Oven, Incinerator Cut Parts, Boxes, Wagon Doors Cut Pieces, Wagon Bfr End Plates And Cut Pieces, Ms Fuel Tanks [fire Prone], Boiler Tank Cut Pieces, Angles, Girder, Sheets Cut Pieces, Portable Stands, Channels ,fabricated Structures And Other Corroded Heavy Melting Scrap Of Different Thickness Of Sorts And Sizes, With Or Without Attachments. Note- 1. Gas Cutting Permitted For The Purpose Of Loading Only. 2. It Is The Responsibility Of The Purchaser To Ensure That Fuel Tanks To Be Filled With Water And Cleaned Thoroughly Free From Flammable Substances Before Cutting To Avoid Explosion Or Any Casualties. 3. Private Crane Permitted For Loading. Special Note- Gas Cutting For Fuel Tank Should Be Done In Open Area [cutting Must Be Kept Clear And Free Of Flammables] And Away From Bins [free From Recognized Hazards That Are Causing Or Are Likely To Cause Serious Harm] And Should Follow Fire-prevention And Fire-protection Measures. Location- [bin No- 261, Left Side Of Road No- 2]. Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only. Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery As Per Mv Act 1988

Details: : Kindly Input Your Total Price Without Vat In Section 3.1.2 And In Section 3.4 Enter It As Per The Breakdown - Please Note That The Prices For Both Sections Should Be The Same Dubai Municipality Has The Right To Disqualify Your Offer If Different Prices Are Submitted - 1: Multiple Light Vehicles Leasing - 1 Each 1: 1 -ton Double Cab 4x4 Pick-up With Hazerd Lights - 3 Each 2: 1 -ton Double Cabin 6 Cylinder, 4x4, 4000 - 4500cc, Automatic Pick-up With Hazerd Light, With Two Sliding Shutters Doors In Both Sides, Safety Flasher Board On The Back + Reflective Sticker, Ball + Pin Hook - 3 Each 3: 1-ton 4 Cylinder Double Cabin 4x4 Pick-up With Hazerd Lights - 1 Each 4: 1-ton Double Cabin 4x4 Pick-up With Hazerd Lights - 4 Each 5: 1-ton Single Cabin 4x4 Pick-up - 6 Each 6: 1-ton Single Cabin 4x4 Pick-up, Mobil Workshop - 1 Each 7: 3 - 5 -ton, 4x2, Single Cabin With Cargo Body Mounted Attenuator And Warning Sign Arrow Board - 1 Each 8: 3 -ton 4x4 Pickup Double Cab - 6 Each 9: 3 -ton 4x4 Pickup Double Cab Attached With Closed Box (mobile Workshop For Spraying Pesticides) - 6 Each 10: 3 -ton 4x4 Pick-up Double Cab With Crane And Tail Gate - 2 Each 11: 3 -ton 4x4 Pickup Double Cab, Automatic, With Tail Lift - 1 Each 12: 3 -ton 4x4 Pickup Double Cab, Mobile Workshop - 1 Each 13: 3 -ton 4x4 Pickup Double Cab, With Closed Box, Tail Lift And Crane To Lift Big Animals - 4 Each 14: 3 -ton 4x4 Pickup Double Cab, With Tail Lift - 2 Each 15: 3 -ton Double Cab 4x2 Pick-up - 44 Each 16: 3 -ton Double Cab 4x2 Pick-up With Steel Canopy And Two Revolving Back Door - 43 Each 17: 3 -ton Double Cab 4x2 Pick-up With Steel Canopy With Side Rolling Door - 3 Each 18: 3 -ton Double Cab 4x2 Pick-up With Steel Canopy With Side Rolling Door- Highway - 11 Each 19: 3 -ton Double Cab 4x2 Pick-up With Steel Canopy With Two Revolving Back Door - 2 Each 20: 3 -ton Double Cab 4x2 Pick-up With Two Sliding Shutters Doors In Doth Sides, Safety Flasher Board On The Back + Reflective ...