Crane Tenders

Details: Description Republic Of The Philippines Province Of Davao Oriental Bids & Awards Committee City Of Mati Invitation To Bid The Provincial Government Of Davao Oriental Through Its Bids And Awards Committee (bac), Invites Licensed Contractors To Bid For The Hereunder Project: Name Of Project : Completion Of Convention Center Location : Tourism Complex, City Of Mati, Davao Oriental Project Description : Permits And Clearances, Project Billboard, Structure Excavation And Layout, Concrete Works, Reinforcing Steel Bars, Rough Masonry Works, Carpentry And Joinery Works (drywall And Toilet Partitions), Ficem Board (enclosed 2nd Floor Interior Columns), Ceiling Works, Glass Works (doors & Windows), Electrical Works, Plumbing Works, Ceiling And Wall Finishes, Floor Finishes, Steel Works, Supply And Installation Of Hvac Ducting Works And Semi-industrial Air Cooler, Supply And Installation Automatic Fire Sprinkler System, Fire Alarm And Detection System, Electronics And Communication Systems, Roofing Works, Supply And Installation Of Fire Extinguisher With Accessories, Letter Signage Approved Budget For The Contract : Php 59,999,985.83 Completion Period : 300 Calendar Days Source Of Fund : Dbp Loan Minimum Equipment Required : 2 Units – One Bagger Mixer; 1 Unit Bar Cutter; 1 Unit – Bar Bender; 1 Unit – Welding Machine; 1 Unit – Oxy/acetylene Cutting Outfit W/ Acc; 1 Unit – Truck Mounted Crane, Hydraulic Telescopic Boom 21-25mt Technical Personnel Required : 1 – Project Manager, 1-project Engineer, 1 – Material Engineer, 1 – Safety Engineer, 1 – General Foreman Prospective Bidders Should Have A Pcab License With An Experience In Undertaking A Similar Project Within The Last 10 Years. Bidding Will Be Conducted Through An Open Competitive Bidding Procedure Using Non-discretionary “pass/fail” Criteria As Specified In The Implementing Rules And Regulations (irr) Of 9184. Bids In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference(s), Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of The Bidding Documents. All Bids Must Be Accompanied By A Bid Security In The Following Form And Amount In Pesos Or An Equivalent Amount In A Freely Convertible Currency. Form Of Bid Security - Cash Or Cashier’s/manager’s Check Issued By A Universal Or Commercial Bank (2% Of Abc) Minimum Amount - P 1,199,999.72 Form Of Bid Security - Bank Draft/guarantee Or Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank. Provided, However, That It Shall Be Confirmed Or Authenticated By A Universal Or Commercial Bank, If Issued By A Foreign Bank ( 2% Of Abc) Minimum Amount - P 1,199,999.72 Form Of Bid Security - Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security (5% Of Abc) Minimum Amount - P 2,999,999.29 Form Of Bid Security - Bid Securing Declaration The Complete Schedule Of Activities Is Listed As Follows: Activities Schedule 1. Issuance Of Bid Documents January 28 To February 17, 2025 2. Pre-bid Conference February 6, 2025 3. Deadline For Submission Of Bids February 18, 2025 - 2:00pm 4. Opening Of Bids February 18, 2025 - 2:00pm The Bac Will Issue Eligibility And Bidding Documents Upon Payment Of A Non-refundable Amount Of P 50,000.00 To The Provincial Treasurer’s Office. The Provincial Government Of Davao Oriental Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Bids. The Provincial Government Of Davao Oriental Pursuant To Section 41.1 Of The Irr Of Ra 9184 As Reiterated Codes 5.9 Of Dbm Circular Letter No. 2010-a, Dated December 30, 2010 Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Irah Marie R. Venus Head, Bac Secretariat Capitol Hill, Mati, Davao Oriental Email Add: Dvo_bacsecretariat@yahoo.com Freddie C. Bendulo, Reb, Mmrem, Mpa Bac Chairperson

Details: Description Admin-bac-form12-1 Revision 2, Effective January 1, 2024 Republic Of The Philippines City Government Of Ormoc 2nd /f New Ormoc City Hall Bldg.,ormoc City Tel # (053) 255-2054 & (8) 832-8888 Local # 1126, 1127 & 1123 Cb08-________________________ Invitation To Bid The City Government Of Ormoc, Through The Bids And Awards Committee (bac), Invites Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) To Bid For The Hereunder Contract: Name Of Contract : Construction Of Agak Drug Rehabilitation And Wellness Facility Location : Brgy. Macabug, Ormoc City Brief Description Other General Requirements; Project Billboard/signboard; Occupational Safety And Health Program; Mobilization/demobilization; Reinforced Concrete; Structural Concrete 3500 Psi (class "a", 28 Days); Reinforcing Steel (deformed), Grade 40; Formworks And Falseworks; Finishing And Other Civil Works; Storm Drainage And Downspout; Ceiling (4.5 Mm Metal Frame Fiber Cement Board); Aluminum Framed Glass Door (swing Type); Aluminum Glass Window (awning Type); Frames (jambs, Sills, Head, Transoms And Mullions); Doors (wood Panel); Fabricated Metal Roofing Accessory (gauge 26, 0.551 Mm, Ridge/hip Rolls); Fabricated Metal Roofing Accessory (gauge 26, 0.551 Mm, Flashings); Fabricated Metal Roofing Accessory (gauge 24, 0.701 Mm, Gutters); Pre-painted Metal Sheets, Rib Type/long Span Above 0.427 Mm. Thck.; Glazed Tiles And Trims; Unglazed Tiles And Trims; Cement Plaster Finish; Painting Works (masonry/concrete); Chb Non Load Bearing/load Bearing (including Reinforcing Steel) 100mm; Metal Structure Accessories (bolts And Rods); Metal Structure Accessories (turnbuckle); Metal Structure Accessories (sagrods); Metal Structure Accessories (cross Bracing); Metal Structure Accessories (steel Plates); Structural Steel (trusses); Structural Steel (purlins); Electrical; Conduits,boxes & Fittings (conduit Works/conduit Rough-in); Wires And Wiring Devices; Panelboard With Main & Branch Breakers; Lighting Fixtures And Lamps; Fire Alarm System; Approved Budget For The Contract : P 4,854,750.12 Cy2025 20% Development Fund-annual Budget Contract Duration : 72 Calendar Days Minimum Equipment 1-rebar Cutter, Max Dia (20mm) (owned/leased); 1-bar Bender (owned/leased); 1-concrete Mixer (1-2 Bagger, 8hp) (owned/leased); 2-welding Machine (owned/leased); 1-cutting Outfit (owned/leased); 1-cargo Truck/delivery Truck (owned/leased); 1-dump Truck (12 Cu.yd) (owned/leased); 1-truck Mounted Crane (20-25 Mtrs.) (owned/leased); Prospective Bidders Should Possess A Valid Pcab License Applicable To The Contract, And Should Have Completed Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project With A Value Of At Least 50% Of The Abc. The Description Of An Eligible Bidder Is Contained In The Bidding Documents Particularly In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations(irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "government Procurement Reform Act". It Is Also Restricted To Filipino Citizens/sole Proprietorships,partnerships Or Organization With At Least Seventy Five Percent(75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. The Complete Schedule Of Activities Are Listed As Follows: Bac Activities Schedules (s) From To 1. Issuance And Availability Of Bidding Documents Friday, January 24, 2025 February 17, 2025 @ 9:30 A.m 2. Pre-bid Conference Monday, February 03, 2025 @ 2:00 O'clock P.m. 3. Deadline For Submission And Receipt Of Bids Monday, February 17, 2025 @ 10:00 O'clock A.m. 4. Opening Of Bids Monday, February 17, 2025 @ 2:00 O'clock P.m. The Bac Will Issue A Complete Set Of Bidding Documents To Interested Bidders Or Their Duly Authorized Representative At The Bac Office, 2/f New Ormoc City Hall Building, Ormoc City, Upon Presentation Of Proper Identification, Special Power Of Attorney (spa), For Authorized Representative And Upon Payment Of A Non Refundable Fee In The Amount Of Five Thousand Pesos Only. (p 5,000.00) To The City Treasurer's Office, Ormoc City. The City Government Of Ormoc Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To Any Affected Bidder Or Bidders. Approved: (sgd) Vincent L. Emnas Date Of Publication:philgeps January 24, 2025 Bac Chairman Newspaper N/a Closing Date: February 17, 2025 2025-01-cb08

Details: Description Item No. Description Quantity Unit A.1.1(3) Provision Of Combined Field Office, Laboratory And Living Quarters Building For The Engineer (rental Basis) 1.00 Lot B.5 Project Billboard 1.00 Lot B.7(2) Occupational Safety And Health Program 1.00 Lot B.9 Mobilization/demobilization 1.00 Lot 804(1)b Embankment From Common Borrow By Equipment 1,800.00 Cu.m. 900(1) Structural Concrete For Footing Tie Beam, Column, Suspended Slab, Girder/beam (class A, 28 Days) 1.00 Lot 900(1)c2 Structural Concrete For Footing And Slab On Fill (class A,28 Days) 25.00 Cu.m. 902(1) Reinforcing Steel Of Reinforced Concrete Structures For Two Up To Five Storey 36.00 Cu.m. 903(2) Formworks And Falseworks 6,944.00 Kg 1001(6) Catch Basin (concrete/chb) 245.00 Sq.m. 1001(8) Sewer Line Works 5.00 Ea 1001(11) Septic Vault 1.00 Lumpsum 1003(1)e Hardiflex On Metal Frame Ceiling 1.00 Units 1003(2) Structural Concrete For Footing Tie Beam, Column, Suspended Slab, Girder/beam (class A, 28 Days) 242.00 Sq.m. 1007 Aluminum Glass Door 50.00 Sq.m. 1008 Aluminum Glass Window 21.00 Sq.m 1010(2)b Wooden Panel Door 42.00 Sq.m 1013(2) Fabricated Metal Roofing Accesory 14.50 Sq.m 1014 Prepainted Rib Type Metal Sheets 65.00 M 1018(1) Glazed Tiles And Trims 263.00 Sq.m. 1027(1) Cement Plaster Finish 305.00 Sq.m. 1032(1)a Painting Works (masonry Painting) 382.00 Sq.m. 1032(1)c Painting Works (metal Painting) 157.00 Sq.m. 1046 100 Mm Chb Non Load Bearing (including Rsb) 374.00 Sq.m. 1046(2) 150 Mm Chb Non Load Bearing (including Rsb) 184.00 Sq.m. 1047(2)a Structural Roof Framing 123.00 Sq.m. 1047(2)c Structural Steel Purlins 6,109.00 Kg 1047(3)a Strutctural Steel Accessories (anchor Bolts) 1,408.00 Kg 1047(3)b Metal Structure Accessories (sag Rod) 96.00 Pc 1047(3)c Structural Steel Accessories (turn Buckle) 23.00 Pc 1047(3)d Structural Steel Accessories (crossbracing) 22.00 Pc 1047(5) Structural Steel Accessories (steel Plates) 44.00 Pc 1100 Junction/utility/pull/square Box 1,065.00 Kg 1100(6)a 20mmø-32mmø Polyvinyl Chloride (pvc) Pipes 245.00 Pc 1100(6)b 90mmø Polyvinyl Chloride (pvc) Pipes 100.00 Pc 1101(2)a 1.6mm² - 5.5mm² Electric Wire (tw/thhn/twhn²) 105.00 Ln.m 1101(2)d 150mm² - 250mm² Electric Wire (tw/thhn/twhn²) 3,300.00 Ln.m 1101(4) Switches 200.00 Ln.m 1101(15) Convenience Outlet 19.00 Set 1102(1) Panelboard With Main & Branch Circuit Breakers 55.00 Set 1103(5) Lighting Fixtures 1.00 Lot 1200 Exhaust Fan/ceiling Fan 112.00 Set 1200(a) Airconditioning System 3.00 Set Spl1 Electrical Duct With Electric Post 4.00 Set Equipment Needed (minimum): Cutting Outfit 1 Unit Welding Machine 1 Unit Truck Mounted Crane (20-25 Mt) 1 Unit Bar Cutter 1 Unit One Bagger Concrete Mixer 1 Unit Bar Bender 1 Unit Backhoe( 0.80cu.m.) 1 Unit Plate Compactor 1 Unit Plate Compactor 1 Unit Concrete Vibrator 1 Unit Dump Truck (10 Cu.m.) 1 Unit

Details: Description Invitation To Bid For Rehabilitation / Improvement Of Various Infrastructure Projects (flood Control, Irrigational Canal & Other Infrastructure Projects), Various Barangays, Tabaco City Contract Id No. 008-02-2025-infra-pb 1. The City Government Of Tabaco, Through The 20% City Development Fund 2025, Intends To Apply The Sum Of Thirty-three Million Six Hundred Sixty-three Thousand Seven Hundred Ninety-four Pesos And Twenty Centavos (php 33,663,794.20) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Rehabilitation / Improvement Of Various Infrastructure Projects (flood Control, Irrigational Canal & Other Infrastructure Projects), Various Barangays, Tabaco City Under Contract Id No. 008-02-2025-infra-pb. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Tabaco Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Within 240 Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The City Government Of Tabaco And Inspect The Bidding Documents At The Address Given Below From 9:00 A.m. To 4:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On February 04-24, 2025 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty-five Thousand Pesos (p25,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The City Government Of Tabaco Will Hold A Pre-bid Conference On February 12, 2025, 9:30am, Bac Conference Room, 2f Annex Bldg., Tabaco City Hall, Tabaco City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before 9:00am, February 24, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On February 24, 2025, 9:30am At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Other Necessary Information: Minimum Pcab License Category: General Engineering Project Size Range: Irrigation Or Flood Control - Medium A Minimum Manpower Requirements: • 1 Project Manager • 1 Project Engineer • 1 Materials Engineer I • 1 Geodetic Engineer • 5 Construction Foreman • 3 Safety Officer • 5 First Aider • 7 Skilled Laborer • 25 Common Laborer Minimum Equipment Required: • 3 Units Bar Cutter • 4 Units Bar Bender • 6 Units Concrete Mixer, One-bagger • 2 Units Backhoe, 0.80 Cu.m, Crawler Type • 1 Unit Backhoe, Wheel Type • 1 Unit Crane, 36 – 40 T, Crawler Type • 1 Unit Jackhammer, With Air Compressor • 1 Unit Welding Machine With Genset • 1 Unit Concrete Cutter/saw • 5 Units Concrete Vibrator • 2 Units Stake Truck • 2 Units Self-loading Truck • 1 Unit Total Station, Including Accessories • 1 Unit Plate Compactor • Enough Handtools 11. The City Government Of Tabaco Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Jovito Bron Coderis, Jr. Bac Chairman / City Legal Office Bac Office / City Legal Office 2f Annex Bldg., Tabaco City Hall, Tabaco City Email: Bactabaco16@gmail.com Website: Tabacocity.gov.ph 13. You May Visit The Following Website: For Downloading Of Bidding Documents: Www.tabacocity.com.ph February 04, 2025 (sgd.) Atty. Jovito Bron Coderis, Jr. Bac Chairperson

Details: Scrap Condemn Ferrous Heavy Mixed Melting Consisting Of Bearing,cover, Locking Plate, Special Rig, Distance Piece Bearing, Middle Wheel Lock Plate, Thrower, Lock Plate, Loose Lip, Racer Distance Piece, Spring Seat Liner,a9, Sa9, C2 Relay Valve, C3w Valve, Air Drayer Valve, Ball Bearing,rollar,secondary Spiring For Wap, Tie Bar Assly C&d No.51, Hexagon Bolt With Hex Sl, Isolating 3 Way Cock, Set Of Key &handal For A, Set Of Machine Items For, Arc-chute Assaly For Em, Flexible Hose, Set Of Spring For Connect, Hex Head Screw M8 X 50mm, Lock Retraction Pin & Cha, Break Shoe Complete Nomin, Set Of Hardware For Prima, 3/4 Duplex Check Valve T, Sander Body Dummy Plug, Set Of Threaded Bolt For, Rotex Magnet Valve Type, Top Opereted Handle For C, 3/4" Check Valve, U Bolt, Screw Driver, Nut Driver, Tubing Cutter, Tap Set, Screw Extracter, Plier, Chisel, Marker Magnetic Stand, File, Taper Drill, Taper Shank Drill, Plane Shank Drill, Center Punch, Measuring Steel Tape, Divider, Set Of Outside And Inside Spring, Crimping Tool, Spanner, Grease Gun, Set Of Square Drive, Weld Deposit Set, Hammer, Crowbar, Torque Wrench, Gear To Half Box, Gas Cutting Blow Ripe, Reamer, Tap Set, Open, Ring, Hand Tap Set, Allen Key, Tubler, Blow Lamp, Pipe Wrench, Safty Helmet, Set Of Jaw, File Set, Micrometer, Sliding Bar, Set Of Plier And Cable Cutter, Token Set, Set Of Electronic Iron, Thickness Gauge, Gas Cylender Key, Steel Blade, Cutogen Nozzle, Drill One Set, Brazing Torch, Ratching, Stripper, Cable Tie Cutting Tool, Regulator, Gauge, Tester, Weighing Machine Parts, Dia Grinder, Drill Machine Parts, Hydrolic Pump, Jack, Tecometer, Elect. Fitting, Spring Seat Assembly, Old Panel Set, Equilizer Beam, Casted Bolster Frame Pieces, Axle Box Housing, Pinion, Portal Cut Lasing, Three Pully, Atd Ball Bearing, St,bt Pipe, Mcc Chanel, Da Box, 9 Ton Adjuster, Angle, Nut, Bolt, Tt Sleeve, Double Strap, Ss Wire Rope, Rt Push Arm, Anchor Fitting, Washer, Gaay Tube Pipe, Super Mast Cross, Feader Attachments, Button Plate, Gaay Rod Double Strap, V Bolt, Cls Panel, Facing Panel Upright, Boom, Strain Clamp, Double Eye Distance Rod, Barbid Wire, Snap Head Pin, Clamp, U Bolt, Balance Bet With Huck And Withot Huck, Turfer, Pull Lift, Chair With Arm, Chair Without Arm, Table, Dropout Fuse, Under Move Fitting, Oprating Handle,outer Rigger, Self Controlled, Hydrolic Pusher & Puller, Socket Set, Drawer Work Bench, Pentopen Strip, Main Spring, Tube, Upper Articulation Assly. Study Link, Pento Base Frame, Servo Motor, Hardware And Compresser Crankshaft, Head, Coupling, Disk Valve, Crossarm Channel, Brackets, Clamp, And Gi Wire, Lfd Frame Cover, Lfd Display Frame, Coach Guidance Shed, Battery Frame, Column Speaker, Single Line Display Board, Horn Speaker, Set Of Lybringth, End Frame, Holder Plate, Bello Plate, Speed Probe Housing Cover, Gear, Cut Piece Of Stator Frame Set Of Hardware, Wag-5 Loco Model Parts, Traction Motor Parts, Ball Bearing, Tm Stator Frame, 12 Hole Adjuster, Anticrip Wire, Clavis Snap Head Pin, Eot Crane, Hog Coupler Heater, Table, Propeller Shaft,board,ferrous Boxes, Almirah, Lockers, And Mics Item. Clamping Plate, Drivers Vaccum, Shaft Assly. Blade, End Shield, Horn Guide, Bolt M 48 Etc. Qty.- 135.565 Mts Approx. Sse Lot No. Et/trs/cs/scrap/condemn/ferrous/heavy Mixed Melt/06/13 Dt. 18/12/2024 Note: 1.lot Should Be Sold On As Is Where Is Basis. 2.qty Of Lot Has Been Assessed On Approximate Basis Subject To Any +/- 10% Variation During Delivery By Actual Weighment If Any. 3.if Any Other Material Except Description Is Found While Delivery, Which Is Strictly Restricted & It Can Not Be Delivered. 4.delivery Of Lot By Actual Weighment. 5.it Is Strictly Advised To The Bidder To See The Lot And Loading Point Personally Before Bidding The Lot In E-auction, No Claim Will Be Entertained After Sale Of The Lot.

Purchaser Name: Blue Crane Route Local Municipality | Supply,delivery,installation,maintenance And Monitoring Of Cctv Camera With Armed Response For The Period Of 36 Months

Description: Sources Sought automated Mat Casting At Richardson Landing, Tn introduction: This Is A Sources Sought Announcement; A Market Survey For Information Only, To Be Used For Planning Purposes. This Is Not A Solicitation For Proposals And No Contract Will Be Awarded From This Announcement. the Government Is Seeking Qualified, Experienced Sources Capable Of Executing A Design Build Contract To Develop An Automated Casting Plant At Richardson Landing To Mass Produce Articulated Concrete Mattress (acm) Squares To Government Specifications Within Specific Tolerances. Squares Cast Will Be Stored On The Current Casting Field And Have Must Have A Compressive Design Strength Of 3,000 Psi At 28 Days. background: Annually, The United States Army Corps Of Engineers (usace) Mississippi Valley Division Casts Approximately 150,000 Squares Of Acm At 3 Government Furnished Locations (see Figure 1). The Acm Is Used As Revetment To Maintain Channel Stability For The Lower Mississippi River. Casting Acm Has Historically Been Provided Via Manual Labor And Cast Outdoors As Weather Permits. articulated Concrete Mattress – Current Process: an Articulated Concrete Mattress Square Consists Of 16 Individual Concrete Blocks (4 Feet X 18 Inches X 3 Inches Thick). They Are Currently Cast In Government Furnished Forms Upon A Proprietary Wire Mesh To Form An Articulated Concrete Mattress Square (4 Feet X 25 Feet X 3 Inches) That Is Used As An Assembly System For Interconnecting The 16 Concrete Blocks. A Mix Design Is Used To Acquire 3,000 Psi On A 28-day Cylinder Break. squares Of Mattress Are Cast In Stacks Of 13 That Are Neatly Aligned Vertically And By Rows (see Figure 2). One Layer Of Specified Paper Is Placed As A Separation Beneath The Bottom Square Of Each Stack And Between Each Successive Layer Of Mattress. The Current Process Requires The Wire Mesh To Be Placed On The Paper With The Cross Wires (bracket Wires) On Top Of The Longitudinal Wires. The Forms Are Then Placed Over The Wire Mesh, The Wire Mesh Drawn Up Into The Notches In The Sides And Cross Pieces Of The Forms, And Cross Rods Driven. The Central Location Of The Wire Mesh In The Form Is Very Important. Also, The Mat Surface Is Consequently Grooved To Provide Indentations Of Approximately 1/4 Inch In Depth And 1/8-inch Width. the Process Includes The Concrete Compacted To The Depth Of A Government Furnished Form By The Use Of Vibration. The Concrete Is Properly Consolidated With No Rock Pockets, Excessive Voids Or Honeycombs Visible On The Mat Surface. The Concrete Is Struck Flush With The Top Of The Forms And Given A Uniform Surface Finish And Uniform Thickness. Any Squares Not Meeting Government Furnished Specifications Are Rejected. requirements: the Contractor Shall Design And Develop A Semi-automated Casting Facility On The Grounds Of The Exiting Government Casting Yard That Can Produce A Minimum Of 50,000 Squares Per Calendar Year Per Shift With The Maximum Capability Of 150,000 Squares Annually With 3 Shifts. The Main Goals Of This Project Include: year-round, Indoor Casting Capability With No Weather-related Quality Issues During Production scalable Based On Number Of Operating Shifts reduced Touchpoints Via Automation high Quality, Increased Production, Improved Efficiency And Consistency improved Safety skilled Labor And Reduced Work Force require Fewer Forms (improved Consistency) heat/steam Curing To Reduce Cement Usage, Decrease Co2, And Higher Strength In A Shorter Timeframe modern Batching System Will Be More Efficient And Provide A Constant Mix Design eliminate The Use Of Separation Paper Between Squares the New Automated Facility Will Cast Acm Using Coarse And Fine Aggregate, Portland Cement, Fly Ash, Air-entraining Admixtures, And Calcium Chloride To Produce Articulated Concrete Squares, To Government Specifications. Squares Of Mattress Shall Be Provided In Stacks Of Up To 14 That Are Neatly Aligned Vertically And Will Be Placed In The Storage Yard In Rows By The Operational Contractor Using Government Furnished High Lift Cranes. Squares Cast Will Be Identical With Minimal Tolerance And Have Compressive Design Strength Of 3,000 Psi At 28 Days. Quality Is The Utmost Importance. Steam Curing And Other Technologies For Concrete Preparation Will Be Included While The Overall Design And Specifications Of The Mattress Will Remain The Same. the Design Of The Automated Facility Will Be Part Of The Contract And Will Ensure That The Facility Design Has Been Adequately Coordinated Between All Disciplines. Specifically, The Capacity Of The Infrastructure Within The Facility Shall Be Designed To Meet The Demands Of The Equipment Within The Facility. The Design Will Be A Two-phase Design Build Project And Will Require The Contractor To Procure Automation Equipment That Meets All “buy American” Requirements And The Design Will Meet All Required Policies For A Dod Facility. Several Of The Main Required Policies Are Listed Below: department Of Defense (2019). Unified Facilities Criteria, Facilities Criteria And Unified Facilities Guide Specifications, Mil-std-3007g. department Of Defense (2024). Dod Building Code, Ufc 1-200-01. department Of The Army (1999). Engineering And Design For Civil Works Projects, Er 1110-2-1150. department Of The Army (2024). Safety And Occupational Health (soh) Requirements, Em 385-1-1. dod Design Criteria: Https://www.wbdg.org/ffc/dod/unified-facilities-criteria-ufc all Designs Shall Be In Accordance With All Local, State, And Federal Laws And Regulations. interested Firms Should Submit A Capabilities Package To Include The Following: The Prime Firm And/or Its Subcontractor(s) (hereinafter Referred To Collectively As “firm”) Shall Have Relevant Experience In Mass Production Of Casting Concrete Products. The Firm Shall Demonstrate Experience Using Pre-cast Concrete. This Experience Must Have Been Performed Within The Last Five Years. firm’s Response To This Synopsis Shall Be Limited To 10 Pages And Shall Include The Following Information: firm’s Name, Address, Point Of Contact, Phone Number And E-mail Address. firm’s Prior Experience In Pre-cast Concrete. firm’s Capability To Perform A Contract Of This Magnitude (> $20m) And Complexity. firm’s Business Size (small Business, Large Business, .etc.) And Bonding Capacity. firms Overall Approach To The Requirements Listed Above. the Firm’s Capability For Performing A Design Build Contract For The Entirety Of This Requirement (facility And Equipment). any Assumptions Or Constraints In The Overall Execution Plan. a Rough Order Of Magnitude (rom) Estimate For The Completed Project. interested Firm’s Shall Respond To This Sources Sought Announcement No Later Than 12:00pm Cst, 5 January 2025. All Interested Firms Must Be Registered In Sam. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Synopsis Or Any Follow Up Information Requests. Respondents Will Not Be Notified Of The Results Of The Evaluation.

Purchaser Name: Blue Crane Route Local Municipality | Supply And Delivey Of Enviromental Services Equipment

Purchaser Name: Blue Crane Route Local Municipality | Supply And Delivery Of Black Refuse Bags

Details: This Is A Sources Sought For The Purpose Of Obtaining Market Research Only. No Proposals Are Being Requested Nor Accepted Under This Synopsis. The U.s. Army Corps Of Engineers, New York District, Will Use Information Obtained Under This Source Sought For Building 110 Repairs – Design Build Phase 1 At Watervliet Arsenal (wva), Ny. the Intent Of This Sources Sought Is To Access Industry's Small Business Concerns Including 8(a) Companies With An Sba Approved Office, Historically Underutilized Business Zone (hub Zone) And Service-disabled Veteran-owned Small Business (sdvosb), And All Small Businesses Under The Size Standard, Capability And Interest In Performing A Construction Project Within Watervliet Arsenal, New York. the Naics Code For This Project Is 236220 – Commercial And Institutional Building Construction. The Government Must Ensure There Is Adequate Competition Among Contractors For Work To Be Performed Under This Solicitation. the New York District, U.s. Army Corps Of Engineers (district) Is Requesting A Design-build Rfp For Building 110 Repairs At Watervliet Arsenal (wva), Ny. the Scope Of Work Consists Of The Phase I Repairs To Building 110 Using The Design Build Contract Method. The General Work Involved Is As Follows: replace Exterior Doors, Transoms, And Rolling Overhead Service Doors That Are Approaching End Of Service Life, Targeting A Minimum 30% Improvement Above Ashrae 90.1-2019 Thermal Performance Requirements. areas Of Suspected Air Infiltration Be Sealed With Either A Low Expansion Spray Foam Or Automated Building Envelope Sealing System, Including But Not Limited To: Window And Door Perimeters, Bottom And Tops Of Walls Where They Intersect The Floor Slab And Roof, As Well As Roof Fastener Penetrations. all Interior Surfaces Of The Building (floors, Ceilings, Walls, Columns, And Windows) Require A Thorough Cleaning In Accordance With Historic Preservation Standards. Existing Paint That Is Flaking And Peeling On The Roof Deck And Interior Brickwork Will Be Removed. Surfaces Are To Be Re-coated In Accordance With Historic Preservation Standards. A Vapor Permeable Coating Compatible With The Automated Sealing System Must Be Utilized On The Inside Face Of The Brickwork In Order To Allow The Envelope To Dry Out. structural Scope For This Project Includes: Masonry Repointing, Repair, And Cleaning; Reinstatement Of Truss Anchors And Braces As Required To Comprise A Complete Lateral Load Path; Implementation Of Improvements To The Ladder System And Crane Operator Access; Localized Steel Column Repairs; Localized Floor Slab Repairs; Localized Roof Deck Repairs; And Localized Truss Reinforcement In Support Of New Roof Insulation, As Required. removal Of All B110 Steam And Condensate Piping Systems And Providing New Piping, Pressure Reducing Stations, Valves, Fittings, And Condensate Receivers And Pumps That Meet The Watervliet Standards Reference For Design And Applicable Codes. Objectives For The Hvac Design Include Renewing Infrastructure. A New Air Compressor Will Be Provided, And All Of The Distribution Piping Will Be Replaced. The Compressed Air System Will Continue To Be Tied Into The Existing Campus Compressed Air System As Well. All Non-potable Water Distribution Piping Will Be Replaced. the Electrical Scope Of Work Entails The Removal Of Circuits To Mechanical And Plumbing Equipment Being Demolished As Well As Providing New Circuits For Steam Condensate Pumps, An Air Compressor And Fire Protection System Nitrogen Generator. the Fire Protection Scope Of Work For Phase 1 Will Provide An Automatic Wet Pipe Sprinkler System Coverage Throughout Lab 156, Fed From Zone 1. The Preaction Sprinkler Systems Will Be Provided With Nitrogen Gas Supervision. The Fire Protection Scope Of Work Will Also Remove The Existing Manual Dry Standpipe System And Provide A New Class I Automatic Wet Standpipe System With Hose Stations Throughout The Manufacturing Area, Tied Into The Existing 8-inch Sprinkler Loop Feed Main. the Roof Scope Of Work May Include Replacement And/or Localized Repair Of The Roof Membrane. abatement Of Hazardous Materials To Support Repair Work. the Anticipated Magnitude Of Construction Is Between $10,000,000 And $25,000,000. interested Businesses Shall Respond To This Sources Sought Synopsis By Submitting Two (2) Examples Of Previous Experience With Commercial And Institutional Building Construction, And Similar In Cost Magnitude (between $10,000,000 And $25,000,000). The Information Submitted Will Be Considered In The Development Of The Acquisition Strategy To Support This Program. responses Are Restricted To U.s. Firms That Are Established And Registered In The System For Award Management (sam), Www.sam.gov. For 8(a) And Hubzone, Firms Must Be Certified By The Small Business Administration (sba). all Interested Businesses Responding To This Market Research Shall Be Limited To The Information Required Above And Shall Be Submitted Via Email Or In Writing By Mail No Later Than 1600 (4 Pm) Est On 23 January 2025.