Crane Tenders

Description: Cond And U/s Released Ms/gi Miscellaneous Scrap Consists Truss, Square Bar/tubes, Pipes And Its Fittings,paint Drum, I-beam/channels, Name Boards, Gratting, Grill Window And Doors , Purlin, Ismb, Ismc, Cut Iron Sheet, Gutter Sheets, Clips, Clamps, Collapsible Gate, Channels, Ridges Support Angles, Cantilever Portion, Stanchion Post, Isa , Ms Rod, Gusset Plate , Protective Mess, Stiffner ,base Plate, Pipes, Grating, Angles, Channels, Frames, Plate, Hollow Tubes, Couoling, Union, Reducer, Elbow, Clamps Spiral Ladder, Ms Tnak, Foot Over Bridge Material, T-section, Flat, Gateand Other Similar Items With Or Without Original Attachment Of Various Sorts And Size. Total Qty-40.000 Mts. Note For Sale -the Material Not Belongs To Above Ds-8 Should Be Treated As Not For Sale. Note. - (1) During Delivery Purchaser Has To First Lift Spiral Ladder And Ms Tank Available In The Lot And Proceed To Other Items (2) Purchasers Should Survey The Material For Road Approach, Location And Qty. Before Bidding To The Lot. After Bidding No Correspondence Will Be Entertained (3) Crane Loading And Cutting Is Permitted. (4) Excess Material Should Returned To The Custodian. (if Any). After Bidding No Correspondence Will Be Entertained Pl No.98057054, Hsn Code: 72044900. Ds8 No 793725 Dt. 29.10.24. Available Under Custodian- Sse/works/vm

Purchaser Name: Blue Crane Route Local Municipality | Details: Details Tender Number T44/2024 Department Blue Crane Route Local Municipality Tender Type Request For Bid(open-tender) Province Eastern Cape Date Published 5/12/2024 Closing Date 07/02/2025 12 00 Place Where Goods, Works Or Services Are Required 67 Nojoli Street, , 67 Nojoli Street-somerset East-somerset East-5850 Special Conditions N/a Enquiries Contact Person Mr Z Gush Email Ictofficer@bcrm.gov.za Telephone Number 042-243-6400 Fax Number N/a Briefing Session Is There A Briefing Session? Yes Is It Compulsory? Yes Briefing Date And Time 17/01/2025 10 00 Briefing Venue 67 Nojoli Street,somerset East, Town Hall Tender Documents Cctv Cameras.docx

Details: Title: Multi Machine - Phase 1 - Prequalification description: The Contracting Authority Shall Procure A Multi Machine At The Port Of Horten. The Multi-machine Shall Replace The Old Mobile Crane. Horten Port Has, In Cooperation With Scan Logistic Partner (slp), Handled The Most Steel, But Is Now Entering New Markets To Load/unload Different Bulk Qualities. Horten Port Would Now Like To Procure A New Multi-machine With A Full Set-up, Including A Lifting Hook And Grab For Lifting, Grabbing And Pinching Various Products. In This Connection, We Invite Tenderers To A Negotiated Procedure.

Description: Landsvirkjun, Hereinafter referred to as the Purchaser, invites bids for the project: 2025-02 Buf10 Civil Engineering, which concerns the construction of civil engineering works at the construction site of the proposed wind farm at Vaðalda below the Sultartangi Dam in Rangárþing Ytra, Hereinafter referred to as the Project. The main components of the project are as follows: – Foundations for 28 wind turbines (reinforced concrete including all earthworks); – Crane sites for the installation of 28 wind turbines; – Pipe cutting and stringing (excavation, laying of strings, ground wires and pull-in pipes, sanding before and after stringing, backfilling and finishing of the surface); – Approximately 1,000 m2 storage station (concrete building for various equipment including workshops and living quarters); – Connection of the storage station to Landsnet's substation; – Infrastructure (e.g. water supply and sewage) for Landsnet's storage station and substation; – Gravel plans in the area of Landsnet's storage station and substation.

Details: Statutory Servicing And Load Testing Of The Hot Cranes Of New 20mgd Plant At Igwtp

Description: P.l.no.98414501. Scrap Electrical Fittings Const. Of (1)magnetic Crack Detector Machine, (2) Automatic Tig Welding Machine, (3) Wood Sawing Machine, (4) Power Hacksaw Machine, (5) Slotting Machine, (6) Centre Lathe Complete Without Motor Driven, (7) Centre Lathe Complete With Motor & Stator, (8) Electric Power Screw Compressor, (9) Vertical Drill Machine Complete With Motor & Stator, (10) Centre Lath Machine With Motor, Stator, (11) Automatic Tig Welding Machine, (12) Lathe Machine Complete With Motor Stator, (13) Shaping Machine Complete With Motor & Stator, (14) Bombay Lathe, (15) Centre Lathe Complete With Motor & Stator, (16) Backing Oven 65kw, (17) Super Cut Saw Band Machine, (18) Vertical Drill Machine Without Motor, (19) Schematic Layout Of Test Bench For Stabilising, (20) Escort Knorr Three Presser Switch, (21) Schematic Layout Of Test Bench For Application & Holding Of Magnet Valve, (22) Test Stand For Escort Knorr Isolating Vale, (23) Condemned Grinding Machine, (24) Condemned Pillar Drill Machine (25) Pedestal Elect. Grinder, (26) Test Bench, (27) Automatic Mica Under Cutting Machine, (28) Hoist Portable Floor Crane. Qty-44434 Kg. Location-sl No. (1) To (14) & Sl. No.(16) To (28) At Ncb -04 & Sl. No. (15) At South Of Lorry Garrage. Condition-cutting Is Allowed For Loading Purpose Only & Delivery Will Be Done Through Lorry.

Description: Scrap & Condemned 1)tata Sumo Regd. No. Up32w-4961, Chassis No. 385003 Hrq 918896, Engine No. 483 Dl 41 Hrq 752017 = 1605 Kg 2) Ambassador Car Regd. No. Dl2ch-5888, Chassis No. 781700, Engine No. 049475 = 1115 Kg 3) Maruti Van Regd. No. Mp26-8558, Chassis No. 826644, Engine No. 472512 = 0725 Kg 4) Tata Sumo Regd. No. Hr01d-6223, Chassis No. 385003ftq921109, Engine No. 483 Dl 41ftq76854 = 1600 Kg 5) Chevrolet Tavera Regd. No. Hr37c-7454, Chassis No. Ma6abcl 5bah 137083, Engine No. 3kl 138347 = 1610 Kg 6) Ambassador Regd. No. Dl2cq-2234, Chassis No. Afg912003, Engine No. 3elcg105144 = 1140 Kg 7) Hero Honda Hunk Motor Cycle Regd. No. Hr02x-8606, Chassis No. Mblkc 13eeagm 04545, Engine No. Kc13eeagm 07143 = 130 Kg Complete Or Incomplete With Or W/o Attachment,as It Is, Us & Ur. Qty = 07 Nos = 7925 Kgs Loc:- Lying At Near Gate No -02 In Scrap Yard Remarks:- Registration Cancelled & Sold Without Registration Number. 2.loading By Purchaser 3.private Road Crane Allowed For Loading Purpose

Description: CATEGORY: 100000000001CAMC of Cranes -35 Nos-Refer annexure I,II,III,IV attached at ATC , 100000000002CAMC of Manual Rolling Shutters -65 Nos-Refer annexure I,II,III,IV attached at ATC , 100000000003CAMC of Motorised Rolling Shutter -51 N-Refer annexure I,II,III,IV attached at ATC , 100000000004 Hiring of Desert Cooler -1st year-Refer annexure I,II,III,IV attached at ATC , 100000000005 Hiring of Desert Cooler - 2nd year-Refer annexure I,II,III,IV attached at ATC , 100000000006 Hiring of Hydraulic Excavator-Refer annexure I,II,III,IV attached at ATC , 100000000007 Load Testing and Certification of Cranes-Refer annexure I,II,III,IV attached at ATC , 100000000008 Load Testing and Certification of Fork lif-Refer annexure I,II,III,IV attached at ATC , 100000000009Load Testing and Certification of Bow Shac-Refer annexure I,II,III,IV attached at ATC , 100000000010 Load Testing and Certification of D- Shack- Refer annexure I,II,III,IV attached at ATC , 100000000011 Load Testing and Certification of Metal Sl-Refer annexure I,II,III,IV attached at ATC , 100000000012Load Testing and Certification of Master R-Refer annexure I,II,III,IV attached at ATC , 100000000013External Examination Pressure vessel- Refer annexure I,II,III,IV attached at ATC , 100000000014Hydrostatic T and C of Oxygen-Refer annexure I,II,III,IV attached at ATC , 100000000015 Hydrostatic T and C of Pres -45 to 3000-Refer annexure I,II,III,IV attached at ATC , 100000000016 Hydrostatic T and C of Pre -15000 lt-Refer annexure I,II,III,IV attached at ATC , 100000000017Hydrostatic T and C of water tank-Refer annexure I,II,III,IV attached at ATC , 100000000018 One time Repairing-Refer annexure I,II,III,IV attached at ATC , 100000000019AMC of PNG System at Centeen-Refer annexure I,II,III,IV attached at ATC

Details: N0016425snb26 – Sources Sought Announcement - Liquid Air Palletized Systems (laps) – Psc 1660, Psc Az13, Psc J016 – Naics 336413 agency: Department Of The Navy office: Naval Surface Warfare Center, Crane Division location: Naval Surface Warfare Center, Crane Division issue Date 01/14/2025 – Closing Date 01/29/2025 this Sources Sought Announcement Is Not A Request For Proposal. Should A Request For Proposal Be Published, It Will Be Made Available, Or Directions To Obtain It, Will Be Made Available Via Https://www.sam.gov this Is A Source Sought Announcement In Accordance With Far 15.201 And In Anticipation Of A Future Procurement Program. The Naval Surface Warfare Center, Crane Division (nswccr) Has A Requirement For Liquid Air Palletized Systems (laps) (drawing 62228 / Pn 708999-1), Air Handling Units (ahus) (drawing 703099 / Pn:703099-1), Pio Spares, Engineering Support And Repairs. Drawings Will Not Be Provided As The Government Does Not Own The Data Rights. These Systems Provide Cooling To Critical Senor Systems To Us Navy P-8a Assets. the Proposed Contract Action Is For The Supplies And Services For Which The Government Intends To Solicit And Negotiate With One Source, Meggitt Defense, 9801 Muirlands Boulevard, Irvine, Ca 92618 (cage 62228). This Effort Will Be Conducted On A Sole Source Basis In Accordance With The Statutory Authority 10 U.s.c. 2304(c)(1) As Implemented By Far 6.302-1. The Program Requires Laps Suppliers To Go Through An Extensive Qualification Plan To Include Inspection, Certification, First Article Testing, And Operational Testing. The Basis For Restricting Competition Is Due To The Duplicative Cost And Schedule Delays That The Government Does Not Expect To Be Recovered Through Competition. all Responsible Sources May Submit A Capability Statement Which Will Be Considered By The Agency. However, A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Solicitation Is Solely Within The Discretion Of The Government. Information Received Will Solely Be Considered For The Purpose Of Determining Whether To Conduct A Competitive Procurement. any Authorized Distributors Are Encouraged To Respond To This Announcement. what/where To Submit: Interested Companies Should Submit, On Company Letterhead, A Notice Of Interest Including The Name, Telephone Number, Mailing Address, And E-mail Address Of One Point Of Contact To Nswc Crane Code 0231, Attn: Gary M. Love, Gary.m.love.civ@us.navy.mil. Please Scan Your Letter Of Interest And Email It To The Contracting Officer, Aaron Deich, At Aaron.d.deich.civ@us.navy.mil And The Contract Specialist, Gary M. Love, At Gary.m.love.civ@us.navy.mil With “liquid Air Palletized Systems (laps)” In The Subject Field. The Notice Of Interest Should Include A Brief Description Of Your Company And Its Capabilities As They Relate To The Requirements Set Forth Below, And Answers To The Following Questions. Please Limit Your Responses To No More Than 2 Pages. is Your Company Capable Of Providing The Items And Services Described Above? If Not, Does Your Company Offer A Valid Alternative To The Aforementioned Parts And Services? is Your Company A Small Or Large Business As Defined By The Small Business Administration (sba) Under Naics Code 335312? how Many Employees Does Your Company Have? does Your Company Have A Website? If So, What Is Your Company’s Website Address? if Your Company Has The Capability To Provide Laps, Ahus, And Pio Spares, Please Provide A Document Showing That Your Company Is An Authorized Distributor Of This Product. If Your Company Is Capable Of Providing An Alternative To Laps, Please Provide A Capability Statement Demonstrating That The Alternative You Plan To Propose Is A Valid Alternative For The Form, Fit, And Function Of The Laps To Include A Mitigate Plan For The Qualification And Certification Testing Requirements From A Schedule And Cost Standpoint. if Your Company Has The Capability To Provide Engineering Service For Troubleshooting And Repair Services For Laps And Ahus, Please Provide A Document Shoring That Your Company Is Capable. information Provided Shall Be Treated As A Business Sensitive Or Confidential To The Responder, Exempt From Public Release Under The Freedom Of Information Act. All Information Shall Be Provided Free Of Charge To The Government. Nswc Crane May Request Further Information Regarding The Capabilities Of Respondents To Meet The Requirements Set Forth In The Announcement. This Source Sought Announcement Is Not A Request For Proposal. The Purpose Of This Sourced Sought Announcement Is To Gather Information For The Purpose Of Market Research. Information Provided In Response To This Source Sought Announcement Will Not Be Considered An Offer By The Responding Contractor And Cannot Be Accepted By The Government To Form A Binding Contract. no Telephone Inquiries Will Be Accepted And Request For Solicitation Packages Will Not Be Granted, As A Solicitation Has Not Been Prepared At This Time. when To Submit: Responses Are Requested Not Later Than 4pm Eastern Standard Time On 01/29/2025. notice Regarding Sources Sought: Please Note That This Sources Sought Is For Information Purposes Only And To Identify Potential Sources. This Notice Does Not Constitute An Invitation For Bid Or Request For Proposal And Is Not To Be Construed As A Commitment By The Government Of Any Kind. other: The Government Will Not Pay For Any Effort Expended Or Any Material Provided In Response To This Announcement, Or Any Follow Up Information Requests, Nor Will The Government Return Any Data Provided. future Information, If Any, Will Be Posted At Sam.gov. contracting Officer Address: naval Surface Warfare Center, Crane Division (code 0231), 300 Highway 361, Crane In 47522 point Of Contact: aaron Deich, Nswccr Code 0231 Contracting Officer, Aaron.d.deich.civ@us.navy.mil gary M. Love, Nswccr Code 0231 Contract Specialist, Gary.m.love.civ@us.navy.mil

Description: CATEGORY: Remotely controlled automatic latching crane hook , 1 by 4 inch Drive MicroLithium Cordless Long-Neck Ratchet , 3 by 8 inch Drive MicroLithium Cordless Long-Neck Ratchet Kit , Cordless Impact driver and Cordless Combi Drill , Industrial Lithium Cordless Vacuum , Industrial cordless jigsaw , Industrial circular saw , Industrial cordless biturbo mitre saw , Lithium Cordless Reciprocating Saw Kit , MicroLithium Cordless 360 degree Angle Head Mini Drill Kit , Cordless Screw Gun with pistol grip handle , Cordless Angle Grinder Cutoff Tool Kit with Safety switch , Lithium half inch Cordless Drill Kit , industrial screw gun , Lithium Cordless In-line Die Grinder Kit , Industrial cordless planner , Industrial cordless multi cutter , Industrial cordless orbital sander , Lithium Cordless Blower , Lithium 800 Lumen Cordless Work Light , Industrial two gear hand drill , Screw gun with collated screw magazine upto 5mm , Industrial angle grinder Dia 230mm , Lithium Cordless large straight Die Grinder , Industrial angle Polisher , Industrial hot air heat gun , Industrial Blower and dust extractor , Industrial compound slide mitre saw , Industrial self drilling screw driver , Two speed industrial magnetic core drill , industrial Nibbler , industrial metal sheet shear , Industrial drill stand , Industrial wet and dry heavy duty vacuum cleaner , Industrial electrical spray paint gun , industrial metal printer , Guide rail , Track connector , industrial tables saw , Track Saw with Plunge Action and L-Box Carrying case , industrial jigsaw