Crane Tenders

Description: Released And Unserviceable Cl.iii Rails To Be Delivered On Actual Weighment Basis. (i)cms Xing 52kg 1 In 12-12 Nos-9.000 Mts (ii) Cms Xing 52kg 1 In 8.5 -1 No-0.570 Mts.total Qty-9.570 Mts. Not For Sale:-(i)rail 90r- 2 Nos (ii) Glued Joint 52kg 6.50 Mtrs Ci-i-13 Nos (iii)sl No.15,16,17,18 & 19 Gj 52kg Attached With Rail 52kg Cl-iii 4.70,5.48, 4.69, 5.60 & 4.90 Respectively.(iv) Sej Stock Rail Tongue Rail And Check Rail Total 15 Nos.(v) Ds- 8 No.795046 Dt 19.10.2024 Available Near To This Lot As Nfs(vi)all Other Materials Availables Near To This Lot To Be Treated As Nfs Since Yard And Excess Materials Should Be Handed Over Custodian. Note: (i) When Crane Loading Is Not Possible, The Purchaser [by Engaging His Own Laborers] Is Permitted To Cut Rails To Loadable Sizes Of Not Less Than 150kgs.(ii) In All Cases I.e Crane Loading/manual Loading, When The Length Of Rails Exceeds 5 Meters Length, The Purchaser [by Engaging His Own Laborers] Is Permitted To Cut Rails To Convenient Lengths Not Less Than 2.5 Meters. (iii) Purchaser [by Engaging His Own Laborers] Is Permitted To Cut Rails And Hand Over The Non-ferrous & Excess Qty If Any To The Custodian. S.1539.ds-8 No 795047 Dt: 15.11.2024 Hsn Code: 720429, Pl No. 98030103. Custodian - Sse/pw/b/tvr.

Description: S&t Work In Connection With:- (a) Mldt Division Tph-rjl Sl Trr(p)= 1.29 Km & Trrp Bgp-jmp Up 305.112-305.621 = 0.509 Km, (b) Tinpahar - Rajmahal (sl) - Tsr(p) - 3.000 Tkm, (c) Tfr- Sl 97.4-114.37=18.97 Km In Section Of Mdle-dumka And Trr(p) 0.580km In Section Of Bhle-baka, (d) New Farakka - Malda (up & Dn) - Tsr(p) - 4.252 Tkm, (e) New Farakka - Malda Town (dn) - Trr(p) - 0.500 Tkm, (f) Malda Division - Ctr(s) - 51.750 Tkm, (g) Malda Division - Trr(s) -14.976 Tkm, (h) Jamalpur - Kiul - Tftr - 1.800 Tkm & Bhagalpur - Jamalpur - Tftr - 0.900 Tkm, (i) Barharwa - Karanpurato - Ttr(fs+tws+wcmsc) - 6 Sets (1:12), (j) Bhagalpur - Kiul (dn) - Ctr(p) - 1.331 Tkm, (k) Azimganj - New Farakka (dn) - Ctr(p) - 25.284 Tkm, (l) Azimganj - New Farakka - Ttr(cs+cmsc) - 24 Sets (1:12) & Ttr(fs+cs+cmsc) - 10 Sets (1:12), (m) Azimganj - New Farakka (up) - Ctr(p) - 27.871 Tkm, (n) Construction Of Subway In Leau Of Lc Gate No 42 At Km 239/7-8 Bet Stn Nile-dgle In Nfk-az Section Of Malda Division, (o) Construction Of Subway In Leau Of Lc Gate No 61 At Km 260/6-7 Bet Stn Tdle-bdag In Nfk-bhw Section Of Malda Division., (p) Construction Of Subway In Leau Of Lc Gate No 41 At Km 238/6-7 Bet Stn Nile-dgle In Nfk-az Section Of Malda Division, (q) Jamalpur - Development Of Infrastructure For Newly Allotted 140 Ton Diesel Hydraulic Brake-down Crane (b.d. Crane) At Jamalpur, (r) Construction Of Lhs At Km 262/2-3 Between Cmx-nfk Station In Mldt-nfk Section, (s) Construction Of Pedestrian Subway At Km 250/6-7 In Connection With Rising Of Sectional Speed To 130 Kmph Under Aen/sbg, (t) Construction Of Pedestrian Subway At Km 272/1-2 In Connection With Rising Of Sectional Speed To 130 Kmph Under Aen/mldt., (u) Provision Of Trd Central Store At Malda

Description: CATEGORY: Tractor mounted timber crane

Description: CATEGORY: Repair and Overhauling Service - EOT CRANE; NA; No; Buyer Premises

Description: Refurbishment Of Rail Mounted Jib Crane With Lt Movement

Description: Hiring Of 01 No Farana Crane Capcity -14 Mt In Excellent Condition On Monthly Hire Basis In Connection With Structural Works For 5th Stream Alumina Refinery At Damanjodi Odisha

Description: Scrap Condemn Ferrous Heavy Mixed Melting Consisting Of Bearing,cover, Locking Plate, Special Rig, Distance Piece Bearing, Middle Wheel Lock Plate, Thrower, Lock Plate, Loose Lip, Racer Distance Piece, Spring Seat Liner,a9, Sa9, C2 Relay Valve, C3w Valve, Air Drayer Valve, Ball Bearing,rollar,secondary Spiring For Wap, Tie Bar Assly C&d No.51, Hexagon Bolt With Hex Sl, Isolating 3 Way Cock, Set Of Key &handal For A, Set Of Machine Items For, Arc-chute Assaly For Em, Flexible Hose, Set Of Spring For Connect, Hex Head Screw M8 X 50mm, Lock Retraction Pin & Cha, Break Shoe Complete Nomin, Set Of Hardware For Prima, 3/4 Duplex Check Valve T, Sander Body Dummy Plug, Set Of Threaded Bolt For, Rotex Magnet Valve Type, Top Opereted Handle For C, 3/4" Check Valve, U Bolt, Screw Driver, Nut Driver, Tubing Cutter, Tap Set, Screw Extracter, Plier, Chisel, Marker Magnetic Stand, File, Taper Drill, Taper Shank Drill, Plane Shank Drill, Center Punch, Measuring Steel Tape, Divider, Set Of Outside And Inside Spring, Crimping Tool, Spanner, Grease Gun, Set Of Square Drive, Weld Deposit Set, Hammer, Crowbar, Torque Wrench, Gear To Half Box, Gas Cutting Blow Ripe, Reamer, Tap Set, Open, Ring, Hand Tap Set, Allen Key, Tubler, Blow Lamp, Pipe Wrench, Safty Helmet, Set Of Jaw, File Set, Micrometer, Sliding Bar, Set Of Plier And Cable Cutter, Token Set, Set Of Electronic Iron, Thickness Gauge, Gas Cylender Key, Steel Blade, Cutogen Nozzle, Drill One Set, Brazing Torch, Ratching, Stripper, Cable Tie Cutting Tool, Regulator, Gauge, Tester, Weighing Machine Parts, Dia Grinder, Drill Machine Parts, Hydrolic Pump, Jack, Tecometer, Elect. Fitting, Spring Seat Assembly, Old Panel Set, Equilizer Beam, Casted Bolster Frame Pieces, Axle Box Housing, Pinion, Portal Cut Lasing, Three Pully, Atd Ball Bearing, St,bt Pipe, Mcc Chanel, Da Box, 9 Ton Adjuster, Angle, Nut, Bolt, Tt Sleeve, Double Strap, Ss Wire Rope, Rt Push Arm, Anchor Fitting, Washer, Gaay Tube Pipe, Super Mast Cross, Feader Attachments, Button Plate, Gaay Rod Double Strap, V Bolt, Cls Panel, Facing Panel Upright, Boom, Strain Clamp, Double Eye Distance Rod, Barbid Wire, Snap Head Pin, Clamp, U Bolt, Balance Bet With Huck And Withot Huck, Turfer, Pull Lift, Chair With Arm, Chair Without Arm, Table, Dropout Fuse, Under Move Fitting, Oprating Handle,outer Rigger, Self Controlled, Hydrolic Pusher & Puller, Socket Set, Drawer Work Bench, Pentopen Strip, Main Spring, Tube, Upper Articulation Assly. Study Link, Pento Base Frame, Servo Motor, Hardware And Compresser Crankshaft, Head, Coupling, Disk Valve, Crossarm Channel, Brackets, Clamp, And Gi Wire, Lfd Frame Cover, Lfd Display Frame, Coach Guidance Shed, Battery Frame, Column Speaker, Single Line Display Board, Horn Speaker, Set Of Lybringth, End Frame, Holder Plate, Bello Plate, Speed Probe Housing Cover, Gear, Cut Piece Of Stator Frame Set Of Hardware, Wag-5 Loco Model Parts, Traction Motor Parts, Ball Bearing, Tm Stator Frame, 12 Hole Adjuster, Anticrip Wire, Clavis Snap Head Pin, Eot Crane, Hog Coupler Heater, Table, Propeller Shaft,board,ferrous Boxes, Almirah, Lockers, And Mics Item. Clamping Plate, Drivers Vaccum, Shaft Assly. Blade, End Shield, Horn Guide, Bolt M 48 Etc. Qty.- 135.565 Mts Approx. Sse Lot No. Et/trs/cs/scrap/condemn/ferrous/heavy Mixed Melt/06/13 Dt. 18/12/2024 Note: 1.lot Should Be Sold On As Is Where Is Basis. 2.qty Of Lot Has Been Assessed On Approximate Basis Subject To Any +/- 10% Variation During Delivery By Actual Weighment If Any. 3.if Any Other Material Except Description Is Found While Delivery, Which Is Strictly Restricted & It Can Not Be Delivered. 4.delivery Of Lot By Actual Weighment. 5.it Is Strictly Advised To The Bidder To See The Lot And Loading Point Personally Before Bidding The Lot In E-auction, No Claim Will Be Entertained After Sale Of The Lot.

Description: CATEGORY: Repair and Overhauling Service - CRANE TIL 6 TON; CRANE TIL 6 TON; Yes; Buyer Premises

Description: 8564 Load Testing Of Eot Crane, Lift And Allied Works In Various Technical Building At Drdl Kalinga Under Age(i) Rand D Nstl Visakhapatnam

Description: Eot Crane -10 Ton