All Tenders

Kubota Rtv-x1100cwl-h With Kubota V5296 66 Inch Snowblower And Kubota V5060 Snowplow Attachments (or Equal). a Drivable Vehicle (not Tractor Or Track Based) That Can Easily Maneuver Within An Enclosed Area As Small As 6' Across And Is Capable Of Clearing Up To 24" Of Snow In A 2500 Square Foot Area. The Vehicle Must Be Capable Of Utilizing On Base Fuel Sources To Include Gasoline, Diesel, Or Jet-fuel. Vehicle Needs To Include Interchangeable Forward Facing Snow Blower & Snowplow Attachments. The Vehicle Needs To Have An Enclosed Cab, Automatic Transmission, And Be Able To Be Serviced Locally In Anchorage, Alaska. any Questions Shall Be Directed To The Pocs Listed Below In Writing To The Email Addresses Kaylie.bechard@us.af.mil And Charles.ramsey.8@us.af.mil No Later Than 12 Pm On August 28, 2024, Akdt. All Questions Will Be Posted And Answered By Amendment Following This Date. for A Quote To Be Considered It Must Be Emailed To Both The Contracting Specialist, Kaylie.bechard@us.af.mil , And Contracting Officer, Charles.ramsey.8@us.af.mil, By 12 Pm On September 4, 2024, Akdt.

R499--avid Technology Services Intent To Sole Source This Requirement

This Is A Combined Synopsis/solicitation For Commercial Items, Prepared In Accordance With The Format In Subpart 12.6 Of The Far And As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes Only Solicitation; Quotes Are Being Requested And A Separate Written Solicitation Will Not Be Issued. solicitation Number52000pr240007398 Applies And Is Used As A Request For Quote (rfq). This Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2024-05, Dated 22 May 2024. It Is Anticipated That A Competitive Price Purchase Order Shall Be Awarded As A Result Of This Synopsis/solicitation. All Responsible Sources May Submit A Quotation, Which If Timely Received, Shall Be Considered By This Agency. the U.s. Coast Guard, Surface Forces Logistics Center (sflc) Intends To Award A Firm Fixed Price Purchase Order. No Down Payments Or Advanced Payments Will Be Made To The Awarded Vendor. Vendor Shall Ensure They Can Secure Funding For This Order Until Delivered And Received By The Us Coast Guard. Payment Will Be Made By Government Purchase Order (net 30) And The Vendor Shall Assume Financial Responsibility Until The Order Is Accepted And Received By Us Coast Guard. Payment Of The Work Is Authorized To Be Submitted As Work Is Completed But Must Be Approved By The Contracting Officer First. basis For Award:thissolicitation Is Based On Far 13 – Simplified Acquisition Procedures And Quotes Will Be Reviewed And Awarded On A Best Value Basis Per The Solicitation. Past Performance Will Only Be Reviewed For “responsibility” Basis Per Far 9.1.the Evaluation Criteria For The Quote’s Will Be Who Meets All The Technical Requirements, Who Meets Our Deadlines And Price. all Quotes Shall Be Emailed To Bryan Duffey Via Email To Bryan.a.duffey@uscg.mil And Shall Be Received No Later Than 09/03/2024 At 11;00 (eastern). All Emailed Quotes Shall Have 52000pr240007398 In The Subject Of The Email. vendor Information: entity Name entity Unique Entity Id entity Address entity Poc entity Phone Number poc Email Address vendor Shall Provide: line 1: description: Remove And Replace Engine Gear Lube Monitor unit Of Issue: line Total: estimated Performance Date: line 2: description: Replace Transom Assembly Bell Housing unit Of Issue: line Total: estimated Performance Date: place Of Performance: cgc Abbie Burgess 54 Tilson Ave, rockland, Maine, 04841 invoicing In Ipp it Is A Requirement That All Invoicing For Purchase Orders Will Now Be Entered And Processed Through Https://www.ipp.gov. all Invoices Must Contain The Following Information: Cg Purchase Order Number, Vendor’s Invoice Number, Cage Number, Po Item Number, Description Of Supplies Or Services, Unit Prices And Extended Totals (invoices For Purchase Orders Awarded By Surface Force Logistics Center, Baltimore Are To Be Sumitted As Non Po In Ipp). Shipping Costs Will Be Indicated As A Separate Line Item On The Invoice (if Applicable). Shipping Cost $100 Or More Must Be Accompanied By A Separate Freight Invoice When Submitting An Invoice(s) For Payment (if Applicable). to Submit An Invoice, Vendor Must Have Access To Www.ipp.gov. To Gain Access Please Indicate If You Don’t Have An Account So The Issuing Office Can Establish One For You. far Clauses this Order Is Subject To But Is Not Limited To The Following Federal Acquisition Regulations: 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment. 52.204-26 Covered Telecommunications Equipment Or Services-representation. 52.212-1 Instructions To Offerors—commercial Products And Commercial Services. 52.212-3 Offeror Representations And Certifications—commercial Products And Commercial Services. 52.204-23 Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities. 52.204-25 Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders—commercial Products And Commercial Services.

B729 Chiller Replacement Amendment 1

Portable Toilet And Handwashing Station Rental

Sources Sought For One (1) Pump Laser In The 405-488 Nanometer (nm) Range, Greater Than (>) One (1) Watt (w) Pumping Power.

** This Is A Brand Name Requirment ** ** See The Attachments ** Forhpsc Dev Kit - Microchip vendors Must Reference The Tracking Number (80nssc24880487q-1) In The Subject Line Of Your Email When Submitting A Quote!

Contact Information|4|n771.2|hqg|refer To Email|jaclyn.i.phillips.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance Of Supplies|26|x||||||||||||x|||||||||||||| wide Area Workflow Payment Instructions (jan 2023)|16|combo Receiving And Invoice||tbd|n00104|tbd|tbd|tbd|tbd|||tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| option For Increased Quantity (mar 1989)|1|365 Days From The Date Of Issuance| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (may 2024)|13|334220|1250|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| this Solicitation Is Issued Pursuant To Emergency Acquisition Flexibilities (eaf). Casrep Accelerated Delivery Is Encouraged And Accepted At No Additional Cost To Government. all Freight Is Fob Origin. this Rfq Is For Repair. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractors Written Acceptance Prior To Execution.. Verify Nomenclature, Part Number, And Nsn Prior To Responding. the Government Is Seeking A Repair Turnaround Time (rtat) Of: 229_days_ government Source Inspection (gsi) Is Required. please Note Freight Is Handled By The Navy As Per The Commercial Asset Visibility (cav) Statement Of Work. your Quote Should Include The Following Information: Quote Amount And Rtat Unit Price:__________ Total Price:__________ Repair Turnaround Time (rtat): _______ Days if Your Company Is Not Quoting The Government's Required Repair Turnaround Time (rtat) Or Earlier, Provide Your Company's Capacity Constraints? _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ repair Turnaround Time (rtat): The Resultant Contractual Delivery Requirement Is Measured From Asset Return To The Date Of Asset Acceptance Under The Terms Of The Contract. For Purposes Of This Section, Return Is Defined As Physical Receipt Of The F-condition asset At The Contractors Facility As Reflected In The Aaction Date Entry In The Commercial Asset Visibility (cav) System. In Accordance With The Cav Statement Of Work, The Contractor Is Required To Accurately Report All Transactions By The End Of The Fifth regular Business Day After Receipt And The Action Date Entered In Cav Must Be Dated To Reflect The Actual Date Of Physical Receipt. The Contractor Must Obtain Final Inspection And Acceptance By The Government For All Assets Within The Rtats Established In This contract. Check One: Firm-fixed-price ___ Estimated ___ Not-to Exceed (nte): ___ Return Material Authorization # (rma), If Applicable:__________ Delivery Vehicle (if Delivery Order Requested) (if Your Company Has A Current Boa/idiq, For Example) :__________________ Testing And Evaluation If Beyond Repair T&e Fee/price (if Asset Is Determined Br/ber): If An Item Is Determined Br, And The Contractor Provides Documentation That Costs Were Incurred During Evaluation And Determination Of Br, The Contracting Officer Will Negotiate A Reduced Contract Price, Not-to exceed (nte) $___________associated With The Repair Effort To Reflect The Br Status Of The Equipment. The T&e Fee (if Asset Is Determined Br/ber) Was Determined/computed Based On:______________________________________. Awardee Info & Performance Location Awardee Cage: __________ Inspection & Acceptance Cage, If Not Same As ""awardee Cage"": __________ Facility/subcontractor Cage (where The Asset Should Be Shipped), If Not Same As ""awardee Cage"":__________ Iot Compare Repair Price To Price To Buy New New Unit Price:__________ New Unit Delivery Lead-time:__________ \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Repair And The Contract Quality Requirements For The Radar Tli . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. document Ref Data=mil-std-129 | | |p |041029|a| |03| 3. Requirements 3.1 Cage Code/reference Number Items - The Radar Tli Repaired Under This Contract/purchase Order Shall Meet The Operational And Functional Requirements As Represented By The Cage Code(s) And Reference Number(s) Listed Below. All Repair Work Shall Be performed In Accordance With The Contractors Repair/overhaul Standard Practices, Manuals And Directives Including But Not Limited To Drawings, Technical Orders, Manufacturing Operations, Tooling Instructions, Approved Repair Standards And Any Other Contractor or Government Approved Documents Developed To Provide Technical Repair Procedures. cage___ref. No. ;28953 A60-35617; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-129; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Mercury Free - The Material Supplied Under This Contract/purchase Order Is Intended For Use On Submarines/surface Ships And Therefore Shall Contain No Metallic Mercury And Shall Be Free From Mercury Contamination. Mercury Contamination Of The Material will Be Cause For Rejection. If The Inclusion Of Metallic Mercury Is Required As A Functional Part Of The Material Furnished Under This Contract, The Contractor Shall Obtain Written Approval From The Procurement Contracting Officer Before Proceeding With Manufacture. The contractor's Request Shall Explain In Detail The Requirements For Mercury, Identify Specifically The Parts To Contain Mercury, And Explain The Method Of Protection Against Mercury Escape. Such A Request Will Be Forwarded Directly To The Procurement Contracting officer With A Copy To The Applicable Government Inspector. Upon Approval By The Contracting Officer, The Vendor Will Provide A "warning Plate" Stating That Metallic Mercury Is A Functional Part Of The Item And Will Include Name And Location Of That Part. The Use Of Mercury, Mercury Compounds, Or Mercury-bearing Instruments And/or Equipment In A Manner Which Might Cause Contamination In The Manufacture, Assembly, Or Test Of Material On This Contract Is Prohibited. The Most Probable Causes Of contamination Are Direct-connected Manometers, Mercury Vacuum Pumps, Mercury Seals, Or The Handling Of Mercury In The Immediate Vicinity. Mercury Switches, Mercury In Glass Thermometers, Standard Cells And Other Items Containing Mercury May Be Used If They Are located So As Not To Constitute A Contamination Hazard. If External Contamination By Metallic Mercury Occurs Or Is Suspected, The Following Test May Be Used To Determine Whether Contamination By Metallic Mercury Exists Or Whether Corrective Cleaning Measures Have Been Effective. Enclose The Equipment In A polyethylene Bag Or Close-fitting Airtight Container For Eight Hours At Room Temperature (70 Degrees F Minimum).sample The Trapped Air And If Mercury Vapor Concentration Is 0.01 Mg/cu Meter Or More, The Material Is Mercury Contaminated Insofar As The requirements Of This Contract Are Concerned. These Requirements Shall Be Included In Any Subcontract Or Purchase Order Hereunder And The Contractor Shall Insure Subcontractor Compliance With These Requirements. Technical Questions Pertaining To These Requirements Shall Be Referred To The Procurement Contracting Officer Via The Cognizant Administrative Contracting Officer. For Background, The Following Information Is Provided: Mercury Is Corrosive To Gold, Silver, Nickel, Stainless Steels, Aluminum And Copper Alloys. Stainless Steels, Nickel, And Copper Alloys Are Widely Used In Reactor Plants And Other Submarine/surface Ship Systems. Accidental Trapping Of Mercury In A component Could Cause Serious Damage To Vital Parts. Mercury Is Also Toxic If Inhaled, Ingested, Or Absorbed Through The Skin. It Is Evident That Grave Consequences Could Result From Small Amounts Of Mercury Vapor Present In An Unreplenished Submarine/surface ship Atmosphere. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Inspection/testing Repaired Items - The Contractor Shall Perform All Inspection And Testing Requirements As Specified In The Original Manufacturer's Specifications And Drawings. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documents That Are Required By Private Industry In Fulfillment Of Contractual Obligations In Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. They May Be Obtained From The Publishers Of The Applicable Societies. C. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410p, 101 Strauss Avenue Indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contract Number, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: Contracting Officer Navicp-mech Code 87321 5450 Carlisle Pike P.o. Box 2020 Mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered From: Commanding Officer Navicp-mech Code 009 5450 Carlisle Pike P.o. Box 2020 Mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Shall Be Obtained By Submitting A Request On Dd Form 1425 To Navicp-mech.

Center Of Military History Support Services

The Naval Postgraduate School Requires The Project Muse Ebook Collection For The Dudley Knox Library.