Computer Hardware Tenders

Corazon Locsin Montelibano Memorial Regional Hospital doh R6 Tender

Healthcare and Medicine

Corrigendum : Closing Date Modified

Details: Description Item Description Abc Unit Quantity 1 Cd4 Test Kit (100 Test/box) 1,350,000.00 Test 900 Conditions And Specifications For Procurement Of Cd4 Count Reagents (revised March 16, 2023) The Supplier Awarded To Supply The Reagents/supplies Shall Adhere To The Conditions And Specifications Stated Below: 1. Reagent System: Cartridge Base Or Non- Cartridge Base; Reagent Package/consumables Procured Will Generate (900 Tests) 2. Provide For Free The Following Equipment Necessary For The Testing, Data Processing And Analysis, Generation Of Results, And Efficient System Operation: A. For Cartridge Base: Purchase Of Single-use Disposable Cartridge Should Be With Free Use Of Machine With The Following Attributes: • Built In Quality Controls To Check System Accuracy, No Need For Additional Costly External • On Board Quality Control To Check Performance • Cd4, %cd4 In A Single Test Run • Innovative Technology: 3-color Fluorescence Imaging Cytometer For Cd4 Counting. B. For Non-cartridge Base: 1 Unit Devoted Flow Cytometer Equipment (inclusive Of Computer Software And Hardware) With The Following Attributes: • Dimension Of Analyzer Shall Fit In To Allotted Space In The Hematology Section • Preferably Brand New, But Equipment Not More Than 2 Years Old Is Acceptable • Preferably With Features That Will Also Allow To Test For Other Parameters Like Cd Markers For Other Hematologic Disorders (e.g. Leukemia) 3. Provide For Free Compatible Ups With Avr For The Cytometry 4. Provide For Free The Installation (including Minor Civil Works), Regular Preventive Maintenance And Calibration Of Equipment, Replacement Of Parts Or Units Duly Coordinated With The Concerned Laboratory Staff And Efm Personnel. 5. Provide For Free The Training And Re-training Of Laboratory Staff To Make Them Competent To Operate The Equipment. 6. A Moa That Covers A Period Of 6 Months With Added Stipulation For Extended Use Of Machine For Free In Case The Reagents Will Not Be Consumed Within 6 Months. 7. Ensure Compliance With Scheduled Preventive Maintenance And Calibration Of Equipment. 8. Ensure Prompt Response By Designate Engineer/s Within 24 Hours For Correction Of Equipment Failure Or Malfunction. 9. Reimburse All Examinations That Are Sent Out Related To Equipment Failure Or Malfunction. 10. Replenish Consumed Reagents And Other Consumables Incidental To Repeated Test Runs Due To Equipment Failure Or Malfunction Or Trial Runs During Training/re-training. 11. Assure Replacement Of Unused Reagents And Consumables (delivered Within 6 Months Of Expiration Date). 12. Assures Replacement Of Reagents And Consumables With 1 Month Remaining Shelf Life Before The Expiration Date. 13. Provide Free Reagents And Consumables And Service Assistance For Equipment Performance Verification Or Validation. 14. Products Carried Are Covered By Current Certificate Of Product Registration For Ivd Or, In The Absence Of The Former, Proof Of Renewal Or Updated Certificate Of Exemption Issued By Philippine Fda. 15. Manufacturing Of Reagents And Equipment Are Covered By Relevant Iso Certification Or Quality Certification Of Similar Nature. Supplier/distributor Is Preferably, But Not Necessarily, Iso 9001:2015 Certified. Total Abc 1,350,000.00

Closing Date12 Sep 2024

Tender AmountPHP 1.3 Million (USD 24 K)

NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY USA Tender

Plastic and Rubber

Details: Nist’s Materials Measurement Laboratory (mml), Chips Metrology Program Is Tasked With Providing The Semiconductor Industry With Measurement Capabilities, Knowledge, And Open-source Data For Polymeric Materials That Are Used In Next-generation Packaging Technologies. for This Program, A High-performance Mid-wave Infrared (mwir) Camera System Is Required. The Objective Of The Metrology Program Is To Spatially Map The Temperature Evolution Of Thermosets During Thermal Cure And During Post-cure Under Relevant Operating Conditions For Packaging Materials (thermal And Humidity Cycling). The Thermoset Will Be Placed On A Thin (approximately 100 μm – 300 μm Thick), Stiff Cantilever (approximate Planar Dimensional Range: 50 Mm × 3 Mm – 100 Mm × 6 Mm) That Will Bend In Response To Cure Shrinkage And Hygrothermal Expansion/contraction. The Amount Of Bending Will Be Measured With A Laser System, Enabling The Cantilever To Act As A Sensor To Quantify The Residual Stress Induced By Dimensional Changes In The Thermoset. The Calculated Stresses Will Be Related To Temperature Fluctuations In The Material That Are Measured By The Ir Camera. An Oven Or Radiative Heaters Will Be Used To Achieve The Hygrothermal States Of Interest. These Setups Create Dimensional Constraints That Require Large, Adjustable Distances Between The Ir Camera And The Cantilever. Additionally, The Planar Dimensions Of The Cantilever Are Small, Which Necessitates An Ir Camera With High Spatial Resolution. To Study Next-generation Packaging Materials That Exhibit Rapid Cure Times, This Ir Camera Must Also Be Capable Of High-speed Operation To Capture The Temperature Evolution Of The Material. nist Is Seeking Information From Domestic Sources That May Be Capable Of Providing A Commercial Item Solution That Meets Or Exceeds One Or Both Of The Following Draft Minimum Configurations, With Optional Line Items Below: technical Specifications - Configuration 1 sensor Size – Native Sensor Resolution Must Be At Least 640 Pixels X 512 Pixels. Pixel Resolutions Gained Through Digital Enhancement Or Mechanical Shifting Of Sensors Relative To Optics Will Be Ignored. acquisition Rates maximum Frame Rate Must Achieve At Least 1004 Hz At 640 Pixels X 512 Pixels. programmable Frame Rates Must Allow For Selection From A Minimum Range Of 0.0015 Hz To 1004hz. maximum Frame Rate Of At Least 15,000 Hz For Subwindowed Frame. spatial Resolution the Spatial Resolution Described Below Must Be Achieved Without The Use Of Extender Rings Which Cause Differences In The Relative Illumination Between The Center And Edges Of The Frame. working Distance – Camera System (detector And Optics Combined) Must Have A Working Distance That Can Be Varied Continuously Between 110 Mm And 500 Mm. instantaneous Field Of View at A Working Distance Of 200 Mm, The Camera System (detector And Optics Combined) Must Have A Spatial Resolution Less Than Or Equal To 89μm/pixel. at A Working Distance Of 500 Mm, The Camera System (detector And Optics Combined) Must Have A Spatial Resolution Less Than Or Equal To 256μm/pixel. field Of View at A Working Distance Of 200mm, The Camera System (detector And Optics Combined) Must Provide A Field Of View Of At Least 50mm X 40mm. at A Working Distance Of 500mm, The Camera System (detector And Optics Combined) Must Provide A Field Of View Of At Least 160mm X 130mm. trigger – Camera System Must Provide At Least One Hardware Trigger Input Available By Bnc Or Sma Connection On The Camera Body. An Included Dongle Between A Camera Body Connector And Bnc Or Sma Meets This Requirement. spectral Range – The Mwir System Must Detect Wavelengths From 3μm To 5μm. calibration – The Camera System (detector And Optics Combined) Must Be Calibrated At A Minimum Range Of −20°c To 350°c Without Extrapolation. software Requirements at Least One Perpetual “seat” Of Analysis Software Licensing Must Be Included. The Computer Used To Control This Camera Cannot Be Connected To The Internet. Therefore, Activation Of This Seat Must Not Require An Internet Connection. Further, The Files Needed To Install And Run The Analysis Software Must Also Be Provided In A Manner That Does Not Require An Internet Connection. setting Of All User-settable Operational Parameters Including Integration Time, Sensor Windowing, Frame Rate, Filter Wheel Position, Trigger Types, Trigger Arming, Emissivity. display Of Real Time Images From The Camera For Operations Including Focusing. capturing Of Data From The Camera To The Control Pc. Both Real-time Streaming Of Data To The Pc And Local Storage On The Camera That Can Be Transferred To The Control Pc Meet This Requirement. exporting Of Data From Any Proprietary Formats To Open Formats. Inclusion Of A Software Development Kit (sdk) That Would Enable Access From Other Programming Languages Can Meet This Requirement If The Sdk Can Read The Raw Data And Any Required Metadata Including Temperature Calibration Information. defining A Region Of Interest Using A Rectangle, Circle, Line, Or Single Pixel And Creating A Time Versus Temperature Plot That Is The Mean Temperature Within That Region. Along With The Plot, It Must Be Possible To Export The Data As At Least One Of The Following Filetypes: .csv, .txt, .xls, Or .xlsx. physical connections From The Camera To The Control Pc Must Enable Data Transfer At The Highest Frame Rate Specified In “2. Acquisition Rates.” description Must Be Included That Lists The Computer Hardware (such As The Frame Grabber Card And The Pci) Required To Connect The Camera To The Computer Using Coaxpress And/or Camera Link Cables To Enable Rapid Data Transfer For High Frame Rate Data Acquisition. must Operate From A Nema 5-15r (standard Us Outlet – 120 V, 15 A). camera System (including Detector And Optics) Must Weigh Less Than 8 Kg So That It Can Be Mounted On Industrially Available Stages. camera Must Include A Filter Wheel That Holds At Least 4 Filters. memory – The Camera Must Include An On-board Solid-state Disk (ssd) With At Least 512 Gb. control Computer – A Control Computer Is Not Required. Nist Will Use Its Own Computer To Control The Camera. technical Specifications - Configuration 2 sensor Size – Native Sensor Resolution Must Be At Least 1280 Pixels X 1024 Pixels. Pixel Resolutions Gained Through Digital Enhancement Or Mechanical Shifting Of Sensors Relative To Optics Will Be Ignored. acquisition Rates maximum Frame Rate Must Achieve At Least 60 Hz At 1280 Pixels X 1024 Pixels. programmable Frame Rates Must Allow For Selection From A Minimum Range Of 0.0015 Hz To 60hz. spatial Resolution the Spatial Resolution Described Below Must Be Achieved Without The Use Of Extender Rings Which Cause Differences In The Relative Illumination Between The Center And Edges Of The Frame. working Distance – Camera System (detector And Optics Combined) Must Have A Working Distance That Can Be Varied Continuously Between 110 Mm And 500 Mm. instantaneous Field Of View at A Working Distance Of 200 Mm, The Camera System (detector And Optics Combined) Must Have A Spatial Resolution Less Than Or Equal To 45μm/pixel. at A Working Distance Of 500 Mm, The Camera System (detector And Optics Combined) Must Have A Spatial Resolution Less Than Or Equal To 128μm/pixel. field Of View at A Working Distance Of 200mm, Camera System (detector And Optics Combined) Must Provide A Field Of View Of At Least 50mm X 40 Mm. at A Working Distance Of 500mm, Camera System (detector And Optics Combined) Must Provide A Field Of View Of At Least 150mm X 110 Mm. trigger – Camera System Must Provide At Least One Hardware Trigger Input Available By Bnc Or Sma Connection On The Camera Body. An Included Dongle Between A Camera Body Connector And Bnc Or Sma Meets This Requirement. spectral Range – The Mwir System Must Detect Wavelengths From 3μm To 5μm. calibration – The Camera System (detector And Optics Combined) Must Be Calibrated At A Minimum Range Of −20°c To 350°c Without Extrapolation. software Requirements at Least One Perpetual “seat” Of Analysis Software Licensing Must Be Included. The Computer Used To Control This Camera Cannot Be Connected To The Internet. Therefore, Activation Of This Seat Must Not Require An Internet Connection. Further, The Files Needed To Install And Run The Analysis Software Must Also Be Provided In A Manner That Does Not Require An Internet Connection. setting Of All User-settable Operational Parameters Including Integration Time, Sensor Windowing, Frame Rate, Filter Wheel Position, Triggers, Emissivity. display Of Real Time Images From The Camera For Operations Including Focusing. capturing Of Data From The Camera To The Control Pc. Both Real-time Streaming Of Data To The Pc And Local Storage On The Camera That Can Be Transferred To The Control Pc Meet This Requirement. exporting Of Data From Any Proprietary Formats To Open Formats. Inclusion Of A Software Development Kit (sdk) That Would Enable Access From Other Programming Languages Can Meet This Requirement If The Sdk Can Read The Raw Data And Any Required Metadata Including Temperature Calibration Information. defining A Region Of Interest Using A Rectangle, Circle, Line, Or Single Pixel And Creating A Time Versus Temperature Plot That Is The Mean Temperature Within That Region. Along With The Plot, It Must Be Possible To Export The Data As At Least One Of The Following Filetypes: .csv, .txt, .xls, Or .xlsx. physical connections From The Camera To The Control Pc Must Enable Data Transfer At The Highest Full Frame Rate Specified Above. must Operate From A Nema 5-15r (standard Us Outlet – 120 V, 15 A). camera Module With Optics Must Weigh Less Than 8 Kg. camera Must Include A Filter Wheel That Holds At Least 4 Filters. control Computer – A Control Computer Is Not Required. Nist Will Use Its Own Computer To Control The Camera. optional Items That May Be Considered: line Item 0002 (optional): description: Extended Temperature Calibration quantity: 1 technical Specifications pricing For Calibration Up To 600°c (including All Required Equipment) May Be Provided As An Option. line Item 0003 (optional): description: All-purpose Lens quantity: 1 technical Specifications pricing For An “all-purpose” Lens That Provides Working Distances Between 500 Mm And Infinity May Be Provided As An Option. pricing For Calibrating The “all-purpose” Lens For The Temperatures Stated Previously Should Be Included As An Option. line Item 0004 (optional): description: Training quantity: 1 technical Specifications pricing For On-site Training On How To Use The Ir Camera System May Be Provided As An Option. line Item 0005 (optional): description: Customer Care Program quantity: 1 technical Specifications pricing For A Customer Care Program (that Includes At A Minimum Remote Technical Support) May Be Provided As An Option. how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Inforrmation. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response: Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Specialist Listed At The Bottom Of This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). identify Laboratory Equipment That Your Company Sells That Is Of The Nature Addressed In The Background Section Of This Notice. Include Brand Name, Make, Model, And/or Other Distinguishing Information. state If Your Company Is The Manufacturer Of The Identified Equipment Or Is A Retailer Or Wholesaler That Normally Sells The Identified Equipment. If The Latter, Indicate Whether The Manufacturer Authorized In Writing For Your Company To Sell The Identified Equipment On Behalf Of The Manufacturer. describe Performance Capabilities And Relevant Or Beneficial Physical And Functional Features For Any Equipment You Identified To Satisfy The Nist-identified Minimum Specifications Described In This Notice. identify Any Aspects Of The Nist Market Research Notice, Including Instructions, And Draft Minimum Specifications In The Background Section Above That Could Be Viewed As Unduly Restrictive Or Contain Unnecessary Barriers That Adversely Affect Your Ability To Fully Participate And Indicate Why. In Such A Scenario, Please Offer Suggestions For How The Market Research Notice And Draft Minimum Specifications Could Be Made More Inclusive And Competitive. discuss Whether The Equipment That Your Company Sells And Which You Describe In Your Response To This Notice May Be Customized To Specifications And Indicate Any Limits To Customization. for The Naics Code Listed In This Notice: indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. describe Services That Are Available With The Purchase Of The Aforementioned Equipment From Your Company Such As Installation, Training, And Equipment Maintenance. describe Standard Terms And Conditions Of Sale Offered By Your Company For The Aforementioned Equipment Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms: Manufacturer Warranty (including Details Regarding Nature And Duration); If Available, Description(s) Of Available Extended Warranty; Equipment Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Equipment, If Available. state Whether Your Company Offers Facility Renovation Services Related To Installation Of The Aforementioned Equipment At Its Delivery Destination, If Required Per The Nist-identified Minimum Specifications, And Provide Description Of Services. Indicate If Your Company Performs The Facility Renovation Services Or Typically Subcontracts The Work To Another Company. Indicate If Your Company Would Be Interested Inspecting The Intended Installation Site During The Market Research Phase. state Published Price, Discount Or Rebate Arrangements For Aforementioned Equipment And/or Provide Link To Access Company’s Published Prices For Equipment And Services. state Whether The Aforementioned Equipment Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Equipment Is Manufactured. identify Any Plans/possibilities For Changes In Manufacturing Location Of The Aforementioned Equipment And Provide Relevant Details. if The Aforementioned Equipment And Related Services Are Available For Purchase On Any Existing Federal Supply Schedule Contract(s) Or Other Contracts Against Which Nist May Be Able Place Orders, Identify The Contract Number(s) And Other Relevant Information. identify Any Customers In The Public Or Private Sectors In Which You Provided The Aforementioned Or Similar Equipment. Include Customer(s) Information: Company Name, Phone Number, Point Of Contact, Email Address. provide Any Other Information That You Believe Would Be Valuable For Nist To Know As Part Of Its Market Research For This Requirement. state If You Require Nist To Provide Additional Information To Improve Your Understanding Of The Government’s Requirement And/or Would Like To Meet With Nist Representatives To Discuss The Requirement And The Capabilities Of The Identified Equipment. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received By 11:00 A.m. Eastern Time On October 31, 2022. Questions Will Be Anonymized And Answered Via Sources Sought Notice Amendment Following The Question Submission Deadline. important Notes the Information Received In Response To This Notice Will Be Reviewed And Considered So That Nist May Appropriately Solicit For Its Requirements In The Near Future. this Notice Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. responses Will Not Be Considered As Proposals Or Quotations. no Award Will Be Made As A Result Of This Notice. nist Is Not Responsible For Any Costs Incurred By The Respondents To This Notice. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Appropriate. thank You For Taking The Time To Submit A Response To This Request!

Closing Date12 Jul 2024

Tender AmountRefer Documents

Nueva Ecija University Of Science And Technology - NEUST Tender

Details: Description Invitation To Submit Price Quotation The Nueva Ecija University Of Science And Technology (neust) Through The Bids And Awards Committee (bac), Hereby Invites All Interested Supplier Registered With The Philippine Government Electronic Procurement System (philgeps), To Quote Their Lowest Price For The Hereunder Contract, Subject To The General Conditions Stated Herein. Name Of Project: Rfq Library Books Location: Neust Gabaldon Campus Approved Budget For The Contract: Php 785,072.00 Source Of Fund: Income Cost Of Bidding Documents: Php 1000.00 Item Description: One (1) Lot Item No. Qty Unit Item Description 1 1 Pc 3g Handy Guide Banquet Service Procedure/3g Learning, C2023 2 1 Pc 5 Steps To A 5: Ap Computer Science A 2023 / Klipp, C2022 3 1 Pc A Complete Step By Step Guide To Successful Event Planning/scott, C2023 4 1 Pc A Visual Reference To Front Office Management/3g Learning, C2023 5 1 Pc Adobe Photoshop, Illustrator And In Design Collaboration/van De Weile, C2022 6 1 Pc Advanced Database Management System, 3/e E-learning, C2023 7 1 Pc Artificial Neural Networks In Java,2/e, Livshin, C2022 8 1 Pc Aspects Of Cross-cultural Interaction And Tourism, Abraham, C2023 9 1 Pc Bakery And Confectionery Technology, Singh, C2023 10 1 Pc Basic Calculus With Dvd, 3e, 3g E-learning, C2023 11 1 Pc Basic Computer Coding: Css 2/e, 3g E-learning, C2023 12 1 Pc Basic Computer Coding: Html,2/e,3g E-learning, C2023 13 1 Pc Basic Computer Coding: Javascript, 2/e, 3g E-learning, C2023 14 1 Pc Basic Computer Coding: Ruby, 2/e, 3g E-learning, C2023 15 1 Pc Basic Computer Coding: Sql, 2/e, 3g E-learning, C2023 16 1 Pc Basic Foods With Dvd, 2/e, 3g E-learning, C2022 17 1 Pc Basic For Numerical And Symbolic Computation/pahcevski, C2023 18 1 Pc Business Math With Dvd, 3/e/3g E-learning, C2023 19 1 Pc Business Driven Information Systems, 8/e/baltazar, C2023 20 1 Pc Computer And Information Science…/clark, C2023 21 1 Pc Information Technology Service Management,3/e,3g Learning, C2023 22 1 Pc Computer Hardware And Software Tools, 2/e/ 3g Learning, C2022 23 1 Pc Security Software Design & Development/ Fretheim, C2024 24 1 Pc Drawing Product Ideas, Fast And Easy Ux Drawing For Anyone/elsentruth C2023 25 1 Pc Artificial Intelligence For Business/hemachandran C2024 26 1 Pc Computer Organization, 3/e/ 3g E-learning, C2022 27 1 Pc Computer Services Management, 3/e/ 3g E-learning, C2023 28 1 Pc Computer Software Languages And Graphic Design/ Verma, C2023 29 1 Pc Computer Systems And Networking Technology, 2/e/3g E-learning, C2023 30 1 Pc Computer Systems Application, 3/e/3g E-learning, C2023 31 1 Pc Data Analysis And Information Processing/pahcevski, C2023 32 1 Pc Data Structure And Algorithm/ Khan, C2023 33 1 Pc Database Systems, 3/e/ 3g E-learning, C2023 34 1 Pc Essay Algebra, Step By Step, 3/e/ Mccune, C2023 35 1 Pc Entrepreneurship Starting And Operating A Business/ Burton, C2023 36 1 Pc Environmental Science For Dummies, 2/e/ Spooner, C2023 37 1 Pc Food Styling: The Art Of Presenting Food/ Moore, C2023 38 1 Pc Front Office Management/ Cajiao, C2024 39 1 Pc Fundamentals Of Human Computer Interaction/ Verma, C2023 40 1 Pc Fundamentals Of Computer Graphics/ Clark, C2023 41 1 Pc General Mathematics With Dvd, 3/e/ 3g E-learning, C2023 42 1 Pc Hotel Sales And Revenue Management With Dvd, 3/e/ 3g E-learning, C2023 43 1 Pc Housekeeping And Operation Management/ Phillips, C2023 44 1 Pc Hygiene, A Safety & First Aid In Hospitality With Dvd/3g E-learning, C2023 45 1 Pc Information & Communications Technology In Everyday Life With Dvd, 3g E-learning, C2023 46 1 Pc Information Systems, 3/e/ 3g E-learning, C2023 47 1 Pc Internet And Web Application Security, 3/e/ Hardwood, C2023 48 1 Pc Information Technology Service Management, 3/e/ 3g E-learning, C2023 49 1 Pc Introduction To Computer Programming & Web Designing/3g E-learning, C2023 50 1 Pc Introduction To Computer Theory, 2/e/ 3g E-learning, C2023 51 1 Pc Introduction To Computing/ Verma, C2023 52 1 Pc Keyboarding And Document Processing/ Kumar, C2023 53 1 Pc Kitchen Essentials & Basic Food Preparation With Dvd, 2/e/ 3g E-learning, C2022 54 1 Pc Leisure & Recreation Management With Dvd, 2/e /3g E-learning, C2023 55 1 Pc Macro Perspective Of Tourism And Hospitality With Dvd, 2/e /3g E- Learning, C2022 56 1 Pc Micro Business Operations With Dvd/3g E-learning, C2022 57 1 Pc Micro Perspective Of Tourism & Hospitality With Dvd, 2/e /3g E-learning, C2022 58 1 Pc Mobile Applications Development Technologies, 2/e /3g E- Learning, C2022 59 1 Pc Mobile Communication Design / Mishra, C2023 60 1 Pc Number Theory/ Pratap, C2023 61 1 Pc Numerical Analysis / Lee, C2023 62 1 Pc Organic Chemistry With Dvd / 3g E-learning, C2020 63 1 Pc Programming Logic And Design, 2/e / 3g E-learning, C2023 64 1 Pc Set Theory / Arkanj, C2023 65 1 Pc Software Design, 2/e/3g E-learning, C2023 66 1 Pc Statistical Theory, 2/e /3g E- Learning, C2022 67 1 Pc Statistics All-in-one Dummies/rumsey, C2022 68 1 Pc Statistics And Probability With Dvd, 3/e/3g E-learning, C2023 69 1 Pc Strategic Supply Chain Management / Perry, C2020 70 1 Pc Structure And Interpretation Of Computer Programs/ Abelson, C2023 71 1 Pc How To Design And Evaluate Research In Education, 11/e/fraenkel, C2023 72 1 Pc Facilitating Student-centered Teaching & Learning/larioque, C2024 73 1 Pc The Entrepreneurial Mind With Dvd / 3g E- Learning, C2020 74 1 Pc Essentials Of Sociology / Boyle, C2023 75 1 Pc General Sociology / 3g E-learning, C2020 76 1 Pc Finance Application And Theory, 6/e /cornett, C2020 77 1 Pc Teach Yourself Visually: Python / Davis, C2022 78 1 Pc C++ Programming / Jones, C2023 79 1 Pc Strategic Corporate Social Responsibility… 5/e / Chandler 80 1 Pc Fundamentals Of Information Systems Security / Kim, C2023 81 1 Pc Business Communication And Character, 11/e / Newman 82 1 Pc Job Ready Sql / Weiss, C2023 83 1 Pc Foundation Of Investment/adair, C2024 84 1 Pc Facilities At Management Concepts-realization-vision/rondeau, C2024 85 1 Pc Business And Society: A Critical Introduction 86 1 Pc Management Research, 2/e / Rose, C2024 87 1 Pc New Perspective Collection, Microsoft 365 & Powerpoint 2021 Comprehensive/campbell, C2023 88 1 Pc New Perspective Computer Concepts Introductory, 21/e / Parsons, C2023 89 1 Pc Illustrated Series Collection, Microsoft Office 365 & Powerpoint 202 90 1 Pc Microsoft 365 & Office 2021 Intermediate / Cable, C2023 91 1 Pc Microsoft 365 & Excel 2021 Comprehensive / Freud, C2023 92 1 Pc Microsoft 365 & Word 2021 Comprehensive / Vermaat, C2023 93 1 Pc Adobe Photoshop: Creative Cloud Revealed, 2/e / Reding, C2023 94 1 Pc Teaching Young Children In Multicultural Classroom…,6/e / Dev Melendez, C2024 95 1 Pc Teaching For Student Learning: Becoming A Master Teacher,4/e/ryan, C2024 96 1 Pc Spss, Statistics: A Practical Guide, 5/e /bennett, C2023 97 1 Pc Discovering Computers 2023…,17/e / Campbell, C2023 98 1 Pc Future Mind Body & The Curiosity Elastic Limits Of Human Performance 99 1 Pc Mindfulness For Everyday Living 100 1 Pc Practical Guide To First Aid 101 1 Pc Family Health Encyclopedia 102 1 Pc Guide To Herbs With Journal 103 1 Pc Balance Your Life 104 1 Pc From Rock Bottom To Becoming A Warrior / Urbis 105 1 Pc Guiness World Records 106 1 Pc Ripley’s Believe It Or Not, All True Weird New! 2024 107 1 Pc The World Almanac And Book Of Facts 2024 108 1 Pc Wild Philippines / Nigel Hicks 109 1 Pc Reviewer For Civil Service Examination 110 1 Pc Msa: Civil Service Reviewer For Professionals And Sub-professional Levels / Alvarez 111 1 Pc Msa Career Service Exam Reviewer/ Alferez 102 1 Pc Civil Service Exam Reviewer, Professional And Sub-professional Level 103 1 Pc Storm Of Swords / Martin 104 1 Pc A Feast For Crowns / Martin 105 1 Pc A Clash Of Kings / Martin 106 1 Pc A Dance With Dragons / Martin 107 1 Pc A Dog’s Journey / Cameron 108 1 Pc A Dog’s Way Home / Cameron 109 1 Pc The One / Cass 110 1 Pc The Crown / Cass 111 1 Pc The Heir / Cass 112 1 Pc The Elite / Cass 113 1 Pc The Stolen Heir / Black 114 1 Pc University Series 1: The Rain In España 115 1 Pc University Series 2: Safe Skies Archer 116 1 Pc Dreams Into Reality 117 1 Pc Hopeless / Hoover 118 1 Pc The Husky And His White Cat Shizun 1 / Rau Bao 119 1 Pc The Husky And His White Cat Shizun 2 / Rau Bao 120 1 Pc The Husky And His White Cat Shizun 3 / Rau Bao 121 1 Pc Family Of Liars / Lockhart 122 1 Pc Where It Began / Stampler 123 1 Pc Home Before Dark / Sager 124 1 Pc Chained To The Past 125 1 Pc Our Wayward Fate / Chao 126 1 Pc Hero At He Fall / Hamilton 127 1 Pc Thousand Autumns 1 / Meng Xi Shi 128 1 Pc Thousand Autumns 2 / Meng Xi Shi 129 1 Pc Blood Fury / Ward 130 1 Pc The Lord Of The Rings: The Return Of The King / Tolkien 131 1 Pc The Lord Of The Rings: The Hobbit/ Tolkien 132 1 Pc Devil’s Cut / Ward 133 1 Pc Percy Jackson And The Olympians: Series 1-5 / Riordon General Conditions: Upon Submission Of Duly Accomplished And Signed Request For Quotation Form (annex “a”), The Following Documents Shall Be Attached. Failure To Comply/submit With Any Of The Following Requirements Shall Be A Basis For Disqualification: 1. Official Receipt Of Payment Of Bid Document 2. Certified True Copy Of Mayor's/business Permit 3. Certified True Copy Of Philgeps Registration 4. Certified True Copy Of Income Tax Return (stamped "received" By The Bir) (for Abcs Above 500k) 5. Omnibus Sworn Statement (oss) Duly Notarized 6. Spa Or Secretary’s Certificate If The Bidder Is An Authorized Representative, Duly Notarized All Quotations Shall Be Considered As Fixed Prices And Not Subject To Price Escalation During Contract Implementation. Any Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Supplier Or His/her Authorized Representative. The Bac Is Conducting The Alternative Mode Of Procurement (small Value Procurement) For This Contract In Accordance With Ra 9184 And Its Implementing Rules And Regulations (irr). The Quotation And Eligibility Documents Must Be Submitted In A Sealed Envelope On Or Before October 07, 2024, 4:00 Pm At The Procurement Office, Neust Campus, Gabaldon Nueva Ecija. Fax Or Email Quotations Will Not Be Honored. Section 39 Of Ra No. 9184, Requires The Winning Bidder To Post A Performance Security, In Such Form And Amount Specified Under Section 39 Of The 2016 Revised Irr, Prior To The Signing Of The Contract As A Measure Of Guarantee For The Faithful Performance Of And Compliance With His Obligations Under The Contract Prepared In Accordance With The Bidding Documents The Neust Reserves The Right To Reject Any Or All Quotations, To Waive Any Minor Defects Therein, To Reject All Quotations At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder(s), And To Accept Only The Offer That Is Most Advantageous To The Government. The Neust Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Quotation. For More Information Concerning This Bidding, Please Contact: Rozette Cohleen D. Parungao Head, Bac Secretariat For Goods And Services Neust Campus, Gabaldon Nueva Ecija Email Address: Bacneustgabaldon@gmail.com Approved By: Sgd. Dr. Franklin T. Dumayas Bac Chairperson

Closing Date7 Oct 2024

Tender AmountPHP 785 K (USD 13.9 K)

DEPT OF THE ARMY USA Tender

Education And Training Services

Details: Brief Summary:the U.s. Army Program Executive Office For Simulation, Training And Instrumentation (peo Stri) Is Conducting Market Research To Determine Interested Sources And Technology Capabilities Of Contractors (both Large And Small) For The Games For Training (gft) Gaming Engine Requirement. This Solution Provides For The Need To Continue To Train Individual And Collective Training Tasks Using A Windows Computer-based Platform. Gft Game-based Technologies Provide Experiential Learning Opportunities To Familiarize And Train Soldiers In Various Tactical Scenarios And Environments. This Product Can Be Used To Plan, Tailor, Develop, Train, And Evaluate Training And Executing The Decision-making Process. Soldiers Will Be Able To Plan And Execute Training, From Populating Formatted Operations Orders To Assessing Training Effectiveness Using An After-action Review System For Individual Leaders As Well As Enhance Teamwork At All Levels. program Description: Peo Stri Has A Requirement To Procure A First-person Game Application Training Solution That Leverages Commercial Or Government Off-the-shelf (cots/gots) Products. The System Will Operate On A Personal Computer In A Standalone Network Without A Requirement For Internet Access. These Technologies Are Readily Available And Require Very Little Time And Space To Setup. Training With Game Applications Will Be Conducted In Mission Training Complexes (mtcs), In A Unit Or Institutional Classrooms, Or Installed Onto A Government Issued Laptop Or Personal Computer For A Soldier’s Self-development. Game Applications Must Provide An Environment To Train Decisive Action In Unified Land Operations. game Applications Must Be Capable Of Replicating Elements Of The Operational Environment (oe). The Environment Shall Provide Soldiers, Leaders, Staffs, And Units The Ability To Train On Mission Critical Tasks And Exercise Cognitive Skills Required To Operate In The Oe. Gaming Applications Shall Support Mission Planning And Mission Rehearsals.this Training Must Be Performed Prior To Deployment, During Deployment, At Home Station, Institutions, Or Through Individual Self-development.the Results Of Training In A Game Environment Shall Enhance And Reinforce Both Soldier And Leader Warfighter Skills With Practical Experience. the U.s. Army Capabilities Manager (acm) Is The Army’s Capability Developer And Centralized Manager For Game-based Training Applications. The Acm Has A Need To Continue To Support The Us Army Gft Program To Include Software Game Engines To Train Individual Soldiers And Combined Units In The Existing Common Operating Environment. the Government Plans To Continue Supporting Capability Which Can Provide The Following: requirements: The Government Has A Requirement For The Support, Integration, Testing,documentation, And Delivery Of A Gft Product And The Software Tools, Plugins, Content Or Other Items Further Defined In Future Sow And Technical Specifications. This Effort Will Be Accomplished For The Peo Stri, Which Includes Software Licenses, Data Rights To All Content And Plug-ins Fully Funded By Government, Labor, Materials, Training Support And All The Necessary Documentation For Implementation By Industry. The Government Will Integrate Gaming Software Into Other Training Or Test Devices. Support From The Contractor For Such Integration Into Other Training Or Test Devices Is Not Included In The Support Requirements For This Gft Requirement.this Requirement Shall Include Delivery Of The Licensed Gft Product, Integration Of The Software On Government Furnished Equipment (gfe) Windows-based Test Pcs, Training And Technical Support. enterprise License: The Enterprise License Shall Be A Separate License Of The Software Delivered Under This Requirement To Extend To The Gft Product As Well As The Software Tools, Plugins, Content Or Other Items That Are Included With The Baseline Capabilities Currently Fielded By Gft Program (hereinafter Referred To As The “currently Fielded Capability”) Except As Varied By The Remainder Of This Document. Licensing And Encryption Of The Software Shall Be Primarily By Software License Issuance And Shall Not Be Restricted Using Usb Dongles Or Encryption Devices.usb Dongles Will Be An Alternative Delivery Option. All Usb Licenses Shall Fall Under The Same Support And License Mechanism As The Software-based Licenses. For The Avoidance Of Doubt, Licenses Will All Be In Encrypted Form. the List Of Tools To Be Delivered And Licensed For Use As Part Of The Software Package Shall Be Set Out In The Contractor’s Proposal. gft Product: The Gft Product Shall Be Of The First-person Perspective Genre With 2d And 3d Game Interface Capabilities. The Gft Product Shall Provide A Deployable, Interactive, Semi-immersive Environment To Train Individual And Collective Skills.the Initial Delivery Of The Gft Product Shall Be Loaded With Any Us Army Specific Content And Capable To Support Enhanced Add-ons. Note: Concurrency Efforts On Us Army Specific Plug-ins Are Outside The Scope Of This Requirement. hardware Specifications And Configuration: The Gft Product Shall Operate On Government Owned Pcs But Shall Be Capable Of Operating On A Variety Of Government-owned Hardware Or Training Aids, Devices, Simulators And Simulations In Accordance With The Enterprise License Agreement And Eula. the Gft Product And All Tools And Components Shall Initially Execute On The Following Minimum Hardware Requirements, Which Is Based On The Current Gft Fielded Hardware. Hardware Specifications Will Be Re-assessed And Modified Based On Future Gaming Software Requirements. minimum Requirements: cpu: I9-13980hx2.2-5.6 Ghz memory: 64gb (32gb*2) Ddr5 5200mhz video Card: 16gb Nvidia® Geforce Rtx™ 4090 Laptop Gpu display: 17.3" Qhd Anti-glare Wide View Angle 240hz 3ms 100% Dci-p3 operating System: Windows 11 Army Gold Master (agm) government Accepts That Access To Updates And Ability For The Software To Meet Performance Requirements Is Subject To The Following Caveat: performance: The Gft Product Shall Render Graphics To The Display At A Minimum Of 30 Frames Per Second (fps) With A Targeted Performance Of 60 Fps While Being Operated Using The Current Specifications Outlined In The Gfe Minimum Requirements. scenario And Behavior Editor the Gft Product Shall Provide A 2d And 3d Mission Editor Capability That Allows The User To Create And Modify Mission Scenarios. terrain Editor the Gft Product Shall Provide A Terrain Editor Capability That Allows The User To Generate Geo-specific And Geo-typical Terrain Databases For Use In The Game Environment. game Asset And Content Editor the Gft Product Shall Provide A Tool That Allows The User To Create Game Assets And Content. the Game Asset And Content Editor Shall Provide 3d Modeling Tools Capable Of Importing And Exporting 3d Modeling Data In A Lossless Manner (textures, Models, Bones, Animations). api/tool To Support Terrain, Model, And Moving Model Import thecontractor Shall Provide An Application Programming Interface (api) For Run-time Ready Terrain, And Static Models Imports, And A Tool For Moving Models Import. audio Editor the Gft Product Shall Provide An Audio Editor Capability That Allows The User To Import, Generate And Edit Sound Sources For Use In The Game Environment. The Audio Editor Shall Be A Specialized Tool That Only Creates And Edits Sound Objects. after Action Review (aar) the Gft Product Shall Provide A 2d And 3d After Action Review (aar) Playback Capability. The Aar System Shall Reproduce Accurate Playback Of All Events That Occurred During Runtime With At Minimum Gameplay Runtime Speed. artificial Intelligence (ai) the Gft Product Shall Support Artificial Intelligence (ai) For Non-player-controlled Entities Within The Game Environment. Game Ai Refers To Techniques Used In Computer And Video Games To Produce The Illusion Of Intelligence In The Behavior Of Computer-generated Forces (cgf). interoperability the Gft Product Shall Use Industry Standard Protocols To Interoperate With And Stimulate Existing Army Live-virtual-constructive Training Systems. fires And Effects Capability the Gft Product Shall Provide A Call For Fire (cff) Training Capability. content Re-use if The Gft Product Is Upgraded To A New Version, It Shall Be Able To Reuse Content From Its Previous Versions Or Provide Tools To Convert Older Gft Product Content To The Latest Version Of The Software. game Models the Gft Product Shall Be Delivered With Models That Function Within The Game. The Models Shall Move And Function Reasonably Realistically, Be Destroyable, And Attributed With Appropriate Loads (i.e. Gear, Munitions) To The Standards In Current U.s. Inventory. uninstaller the Gft Product Uninstaller Shall Provide The Capability To Fully Remove All Files And Licenses Associated With Its Install And Use. launcher Window the Gft Product Launcher Window Shall Provide The Capability To Launch The Gft Product Across The Network, Giving An Instructor A Single Station Of Control For Launching And Shutting Down An Entire Network Game. If The Gft Product Has Command Line Switches For Startup, The Launcher Shall Also Allow The End User To Select Various Command Line Switches To Open The Gft Product In Any Desired State, As An Alternative To A Command Line Start. radio Communications the Gft Product Shall Support In-game Radio Communications As Well As The Ability To Interact With Internet Protocol (ip) Based Tactical Simulation Radios. The In-game Communications Shall Include At Minimum The Following Functionality: dis Communications the Gft Product Shall Provide The Capability To Stimulate Dis Audio Communication And Communicate Via Dis With Other Radio Systems. The Radio Communications Will Provide Support For Site Id And App Id In Dis. radio Capability the Gft Product Shall Provide Each User With Multi-channel In-game Radio Capability To Communicate With Each Game Client And The Client’s Users Via Microphone/speakers Or Headset. radio Playback the Gft Product Shall Be Able To Capture In-game Radio Traffic For Playback. The In-game Recording Shall Be Capable Of Synchronizing To The Time And The Events Of The Aar File During Playback And Segregate To Each Of The Client User’s Voice Channels. degradation the In-game Radio Communications Will Provide The Capability To Portray The Effectiveness Of Communication Systems Using Line Of Sight As Affected By Terrain. constraints software Development Will Not Be A Part Of The Continued Effort. The Gft Product Must Operate On Currently Fielded Computer Hardware Capabilities To Develop, Execute, And Store Simulation Data. enterprise License Control Will Be With Government Purpose Rights For Technical Data When Capability Is Developed With Government Funding Or A Blend Of Commercial/government Funding. An Enterprise License Is Required And Will Be Authorized For The Programs’ Intended Users As Needed. acquisition Strategy Planning Information contract Vehicle: The Determination Of Contract Vehicle And Small Business Set Aside Or Full And Open Competition Will Not Be Established Until Market Research Has Been Completed And The Acquisition Strategy Has Been Approved. north American Industry Classification System (naics): Naics Code Being Considered For This Effort Include 513210 Software Publishers. contract Type: The Determination Of Contract Type Will Not Be Established Until Market Research Has Been Completed And The Acquisition Strategy Has Been Approved. approximate Funding: Funding With An Annual Amount To Be Determined (tbd). approximate Award Date: Award Planned Nlt 3q2027. responses Requested: Interested Contractors Shall Submit Responses To This Rfi To Both The Contracts And Program Pocs Not Later Than Wednesday12:00 Pm Est, 25 September2024indicating Their Capabilities In Fulfilling The Functions And Tasks Described Herein. Contractors Shall Submit A Capability Statement That Provides The Information Requested Below (10 Pages Maximum). questions:contractors Are Asked To Address The Following Questions In Their Response, If Applicable To The Capability/solution Submitted. what Recent Relevant Performance (past Five (5) Years) And/ Or Current Work Experience Does Your Company Have Performing Similar Work? Please Describe Your Effort And Role. what Basic Technologies/components Do You See Being Needed For Supporting A Gft Product? Considering Both Your Solution And Other Capabilities In Industry, What Would You Consider Are The Best Of Breed Solutions For The Technologies/components That You Listed And Why. how Does Your Solution Address Enterprise License Control? Will You Be Partnering With Other Industry Entities To Support Your Processes For Enterprise Licenses? what Level Of Software Support Can Your Solution Support (i.e. Telephonic Help Desk Support, Email Support, After Hour’s Responses, Etc.)? The Goal Is To Achieve The Highest Level Of Help Desk Responses That Can Support The Requirements. how Does Your Solution Address Modularity And The Ability To “plug And Train” With Components, Haptics, And Peripheral Devices? how Does Your Solution Address Limitations On Proprietary Software Regarding Platform Support Capabilities And Help With User Created Scenarios? how Does Your Solution Address Network Limitations Of Army Inter-installation Connections? is Your Company Classified As A Large Or Small Business Under The Naics Code 513210 Software Publishers? Identify Your Company’s Socioeconomic Status (e.g.,8a, Hubzone, Sdvosb, Wosb, Etc.) are You Planning On Subcontracting Or Partnering With Other Companies To Fulfill The Requirements Of This Effort? If So, Please Provide The Company Names. Also, Please Identify Whether Each Company Would Be Classified As A Large Or Small Business Under The Naics Code You Would Determine For The Services/supplies Provided In Support Of This Effort. In Addition, If Applicable, Please Identify The Company’s Socioeconomic Status (e.g., 8a, Sdb, Hubzone, Vosb, Sdvosb, Wosb, Etc.). Finally, If Applicable, Please List The Percentage Of Small Business Subcontracting Anticipated For This Effort. information Submission Instructions:all Capability Statements Sent In Response To This Rfi Must Be Submitted Electronically (via Email) To The Contracts And Program Pocs Identified Below. Responses Shall Include Documentation Of Technical Expertise And Capability In Sufficient Detail For The Government To Determine That Your Company Possesses The Necessary Functional Area Expertise And Experience To Compete For This Acquisition. It Is Imperative That Business Concerns Responding To This Rfi Articulate Their Capabilities Clearly And Adequately. Instructions For Submission Are As Follows: only Email Submission Will Be Accepted. use Ms Office 2013 Compatible (.xlsx, .docx Or .pptx) Or Adobe Acrobat 9 Pro (.pdf) Formats. classified Material Will Not Be Accepted. material Samples Will Not Be Accepted. information Papers May Be Submitted In A White Paper Format And Will Count Towards The Total Number Of Pages Allowed. the Cover Sheet Shall Include The Following Company Information: Name, Address, Url, Poc Name And Email Address, Commercial Government Entity (cage) Code Number, Data Universal Numbering System (duns) Number, Business Type And Size, And A Statement If Your Firm Is Or Is Not Foreign Owned, Foreign Controlled, Or Has Foreign Influence. all Responses Shall Be Sent Via Email To:graham.k.oliff.civ@army.mil, Demetria.b.carter.civ@army.miland David.c.perez.civ@army.mil the Deadline For Submitting Capability Statements Is 12:00 Pm Est,25september 2024. disclaimer:this Request For Information Is Issued Soley For Informaiton And Planning Purposes Only. The Government Will Use The Information Received To Determine Its Acquisition Strategy. The Information Provided In This Notice Is Subject To Change And Is Not Binding On The Government. This Is Not A Solicitation, Invitation For Bid (ifb), Request For Quote (rfq), Or Request For Proposal (rfp), And Is Not A Commitment By The U.s. Government To Procure Subject Services/supplies. The U.s. Government Will Not Pay For Information Requested Nor Will It Compensate Any Respondent For Any Cost Incurred In Developing Information Provided To The United States Government. Additionally, All Submissions Become Government Property And Will Not Be Returned. Any Information Submitted By Respondents To This Technical Description Is Strictly Voluntary. Not Responding To This Rfi Does Not Preclude Participation In Any Future Rfp, If Any Is Issued. If A Solicitation Is Released, It Will Be Synopsized On The Government-wide Point Of Entry Website. It Is The Responsibility Of The Potential Offerors To Monitor This Site For Additional Information Pertaining To This Announcement. *note (limitations On Subcontracting):if You Are A Small Business Interested In Being The Prime Contractor For This Effort, Please Be Advised That The Far Clause 52.219-14, Limitations On Subcontracting, Has Changed. Deviation 2019-o0003 Is Now In Effect Which Adds The Definition Of “similarly Situated Entity” And Changes The 50% Calculation For Compliance With The Clause. Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation 52.219-14 Class Deviation 2019-o0003, Dated 03 Dec 2018 At Https://www.acq.osd.mil/dpap/dars/class_deviations.html. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize A “similarly Situated Entity” To Meet The Limitation On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics That You As The Prime Would Assign For Their Workshare. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In The Ssn To Assist The Government's Capability Determination. point Of Contact Information: contracts Poc: Graham Oliff,graham.k.oliff.civ@army.mil,demetria Carter,demetria.b.carter.civ@army.mil Program Poc: David Perez,david.c.perez.civ@army.mil, (407) 797-6468 Contracting Office Address: U.s. Army Contracting Command-orlando (acc-orl), 12211 Science Drive, Orlando, Fl 32826 Place Of Performance: Orlando, Fl 32826

Closing Date25 Sep 2024

Tender AmountRefer Documents

DEPT OF THE ARMY USA Tender

Education And Training Services

Description: Amendment 1: Questions Received And Their Answers 1. “could You Please Confirm Do You Need Installation?” Answer: Yes 2.“i Have A Question Regarding The Software Mast, Pcsim, And Pcbme. Can You Tell Me The Full Names Of The Software Instead Of The Acronyms?” Answer: Mast.exe (maritime Simulation Tool), Pcsim.exe (pc Simulation Engine), Pcbme.exe (pc Bridgemaster-e Radar Emulator). 3. "could Please Confirm The Submission For This Rfi Will Be By Email Or Post?" Answer: Respond Through Sam.gov Notice request For Information (rfi) maritime And Intermodal Training Department (mitd): Classroom Refresh 1. Overview this Rfi Is Issued Solely For Information And Planning Purposes. It Does Not Constitute A Request For Proposal (rfp), A Request For Quote (rfq), Or A Promise To Issue An Rfp Or Rfq In The Future. This Rfi Does Not Commit The Government To Contract For Any Future Services. At This Time, The Government Is Not Seeking Proposals And Will Not Accept Unsolicited Proposals. The Government Will Not Pay Rfi Responders For Any Information Or Administrative Costs Incurred Responding To This Rfi. All Costs Associated With Responding To This Rfi Are Solely At The Interested Party’s Expense. Not Responding To This Rfi Does Not Preclude Participation In Any Future Rfp Or Rfqs If One Is Issued. this Rfi Is Intended For The Government To Identify Sources That Can Provide Required Software Products And/or Services. The Information Provided In This Rfi Is Subject To Change And Is Not Binding On The Government. The Government Has Not Made A Commitment To Procure Any Of The Rfi Requirements Discussed, And Release Of This Rfi Should Not Be Construed As Such A Commitment, Or As Authorization To Incur A Cost For Which Reimbursement Would Be Required Or Sought. All Submissions Become Government Property And Will Not Be Returned. 2. Purpose mitd Maintains Training Simulators At Fort Eustis, Va. The Simulators Are Connected To Various Computer Equipment, Including Hardware, Software, Parts, Components, And Accessories, Etc. the Objective Is To Obtain The Necessary Services, Software, And Hardware To Complete A System Upgrade Including The New Features And Capabilities That A “state Of The Art” System Must Have. The Scope Of Work Covers The Complete Cost, Time, Travel, Purchase Of Components, And Installation. all Work Will Be Done At Either The Contractor’s Location Or On Base At Fort Eustis, Va. 3. Salient Characteristics proposed Solutions May Include Alternatives That Are Equivalent To Or Exceed Any Brand-name Identifications Herein. The Proposed Solution Must Demonstrate The Ability To Satisfy All Salient Characteristics, As Follow: ncl Instructor Station (rear): Dell Desktop, Quantity: 1 13th Gen Intel® Core™ I7-13700 (30 Mb Cache, 16 Cores, 24 Threads, 2.10 Ghz To 5.20 Ghz Turbo, 65 W) windows 11 Pro, English intel Integrated Graphics – Three Display Port Outputs nvidia® Rtx™ A2000 12gb, 12 Gb Gddr6 (where Required) 32 Gb: 2 X 8 Gb, Ddr5, 4800 Mt/s 512 Gb, M.2, Gen 4 Pcie Nvme, Ssd, Class 40 precision 3460 Sff With 300w (80 Plus Platinum) Psu, Rpl And Adl Compatible provide A New Ptt Headset For Voice Communications. provide Software Updates To Mast, Pcsim, And Pcbme To Support Enhanced 3d And Filtering Capabilities For Instructor User Interface. provide Updates To Vhf And Mfhf Radios Running At The Ios Allowing For Two-way Communication. ncl Instructor Station (front): Dell Desktop, Quantity: 1 13th Gen Intel® Core™ I7-13700 (30 Mb Cache, 16 Cores, 24 Threads, 2.10 Ghz To 5.20 Ghz Turbo, 65 W) windows 11 Pro, English intel Integrated Graphics – Three Display Port Outputs nvidia® Rtx™ A2000 12gb, 12 Gb Gddr6 (where Required) 32 Gb: 2 X 8 Gb, Ddr5, 4800 Mt/s 512 Gb, M.2, Gen 4 Pcie Nvme, Ssd, Class 40 provide The Same Versions Of Gmdss, Radar, Ecdis Software That Are Used On Student Stations For Demonstrative Purposes. ncl Student Stations: Dell Desktop, Quantity: 15 13th Gen Intel® Core™ I7-13700 (30 Mb Cache, 16 Cores, 24 Threads, 2.10 Ghz To 5.20 Ghz Turbo, 65 W) windows 11 Pro, English intel Integrated Graphics – Three Display Port Outputs nvidia® Rtx™ A2000 12gb, 12 Gb Gddr6 (where Required) 32 Gb: 2 X 8 Gb, Ddr5, 4800 Mt/s 512 Gb, M.2, Gen 4 Pcie Nvme, Ssd, Class 40 precision 3460 Sff With 300w (80 Plus Platinum) Psu, Rpl And Adl Compatible provide Pcsim And Pcbme Radar Emulation Running At Each Student Station To Current Versions. provide Enhanced 3d And Filtering Capabilities For Radar Emulators. replace Synapsis Ecdis Software With Synapsis Nx Ecdis Software. provide Updated Configuration Including Network Setup For Supporting The Nx Package. update Vgmdss Software Package To Current Versions Of Applications And Provide New Fleet Broadband Capabilities To Replace Obsolete Fleet77 Satellite Comms. provide A Radar Overlay For The Nx Ecdis To Provide For Displaying Radar Video Overlay Directly On The Ecdis Chart. gmdss Console: Dell Desktop, Quantity: 10 13th Gen Intel® Core™ I7-13700 (30 Mb Cache, 16 Cores, 24 Threads, 2.10 Ghz To 5.20 Ghz Turbo, 65 W) windows 11 Pro, English intel Integrated Graphics – Three Display Port Outputs nvidia® Rtx™ A2000 12gb, 12 Gb Gddr6 (where Required) 32 Gb: 2 X 8 Gb, Ddr5, 4800 Mt/s 512 Gb, M.2, Gen 4 Pcie Nvme, Ssd, Class 40 precision 3460 Sff With 300w (80 Plus Platinum) Psu, Rpl And Adl Compatible provide Current Versions Of Gmdss Applications Including The New Fleetbroadband Application. provide New Ptt Handsets For Each Computer 4. Additional Information please Supply An Itemized Estimated Price List For For Each Part, Including Software, Which Must Be Purchased. please Supply An Itemized Estimated Price List For Each Station: Front, Rear, Student, And Gmdss. please Supply An Itemized Estimated Price For Each Of The Following: Installation, Training, Travel, And Other Direct Costs. please Supply An Estimated Price For The Total Project. please Provide An Estimated Delivery And Installation Schedule For An Estimated Award Date Of September 1, 2024. please Describe Any Training That May Be Available. please Describe Any Technical Support Services That May Be Available From Your Company. If Technical Support Is Not Available For Any Portion Of This Requirement, Please Describe How The Customer Would Obtain Technical Support Directly From The Manufacturer Or Otherwise. would Your Company Consider This Requirement A Service Or A Supply Purchase? Please Explain Why. please Identify All Contracts Through Which Your Company Would Also Consider Bidding On Any Potential Rfp Or Rfq For This Requirement (for Example, Chess, Mas, Oasis, Etc.) please Provide Any Additional Information That Your Company Would Like To Provide Us With Concerning This Requirement. 5. Questions And Responses questions Are Due By 5:00 Pm Et On July 12, 2024. Earlier Questions Are Encouraged. Questions Beyond The Deadline May Be Considered In The Contracting Officer’s Discretion. Questions Must Be Emailed To Justin.f.lapiana.civ@army.mil. responses Are Due By 5:00 Pm Et On July 26, 2024. Solutions Must Demonstrate The Ability To Satisfy Each Salient Characteristic. Your Answers Must Respond To Each Item In Section 4 Above, In Itemized Format As Numbered Above. Responses Must Be Posted To Chess. responses Are Limited To 20 Pages. A Page Is Defined As 8.5” X 11” Size With 1” Margins. All Text Must Be In 12-point Times New Roman Font. Images Are Permitted And Count Towards The Page Limit. Pages Submitted In Excess Of The Page Limit May Be Considered In The Contracting Officer’s Discretion.

Closing Date26 Jul 2024

Tender AmountRefer Documents

DEPT OF THE NAVY USA Tender

Others

Corrigendum : Closing Date Modified

Description: Nrl Combined Synopsis/solicitation For Commercial Items Template ($10k & Above) this Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, "streamlined Procedures For Evaluation And Solicitation For Commercial Products And Commercial Services," As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotations Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Solicitation Is A Request For Quotations (rfq). The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2024-03 effective: 23 February 2024 the Associated North American Industrial Classification System (naics) Code For This Procurement Is 541519, With A Business Size Standard Of 150. the Associated Federal Supply Code (fsc) / Product Service Code (psc) Procurement Is 7b21. the Naval Research Laboratory (nrl), Located In Washington Dc Is Seeking To Purchase Dell Computer Server Hardware ___see Attached Schedule Of Supplies/services Or _____ See Chart Below x See Specification Attachment supplies: Brand Name Or Equal. items Must Be Brand Name Or Equal In Accordance With Far 52.211-6. far 52.212-1 Has Been Tailored To Include The Following Additional Instructions: • This Procurement Is For New Equipment Only, Unless Otherwise Specifically Stated. No Remanufactured Or "gray Market" Items Are Acceptable. All Equipment Must Be Covered By The Manufacturer's Warranty. • Vendor Shall Be An Original Equipment Manufacturer (oem), An Oem Authorized Dealer, An Authorized Distributor, Or An Authorized Reseller For The Proposed Equipment/system Such That Oem Warranty And Service Are Provided And Maintained By The Oem. All Software Licensing, Warranty, And Service Associated With The Equipment/system Shall Be In Accordance With The Oem Terms And Conditions • Offerors Are Required To Submit Documentation From The Manufacturer Stating That They Are An Authorized Distributor For The Specific Items Being Procured. delivery Address: U.s. Naval Research Laboratory 4555 Overlook Avenue, S.w. bldg. 49 – Shipping/receiving code 3400 washington, Dc 20375 **fob Destination Is The Preferred Method** estimated Delivery Time: __________________ for Fob Orgin, Please Provide The Following Information: fob Shipping Point: _______________________ estimated Shipping Charge: _________________ dimensions Of Package(s): ____________________ shipping Weight: __________________________ the Following Far & Dfars Provisions And Clauses As Identified Below Are Hereby Incorporated. Any Far & Dfars Provisions Or Clauses Not Applicable By Their Terms Shall Be Self-deleting. Any Far Or Dfars Provisions Or Clause(s) Erroneously, Or Otherwise, Omitted, That Which Should Have Been Included By Their Terms, Shall Be Considered To Be Incorporated Into This Solicitation And Any Resultant Contract. the Full Text Of Far & Dfars Provisions And Clauses May Be Accessed Electronically At https://www.acquisition.gov. The Clauses And Provisions Identified Below Are To Be Considered The Most Up-to-date Version, As Accessible At Https://www.acquisition.gov/. 52.203-11, Certification & Disclosure Regarding Payments To Influence Certain Federal Transactions 52.203-18, Prohibition On Contracting With Entities That Require Certain Internal Confidentiality Agreements Or Statements—representation 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements 52.204-7, System For Award Management 52.204-16, Commercial And Government Entity Code Reporting 52.204-17, Ownership Or Control Of Offeror 52.204-20, Predecessor Of Offeror 52.204-24, Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment – Attached Below To Be Completed And Returned With Quote/proposal. 52.204-26, Covered Telecommunication Equipment Or Services - Representation 52.209-11, Representation By Corporations Regarding Delinquent Tax Liability Or A Felony Conviction Under Any Federal Law 52.211-14, Notice Of Priority Rating For National Defense, Emergency Preparedness, And Energy Program Use 52.212-1, Instructions To Offerors-commercial Products And Commercial Services 52.212-3, Offerors Representations And Certifications-commercial Products And Commercial Services 52.217-5, Evaluation Of Options 52.219-1, Small Business Program Representations 52.223-22, Public Disclosure Of Greenhouse Gas Emissions And Reduction Goals—representation 52.225-18, Place Of Manufacture 52.225-25, Prohibition On Contracting With Entities Engaging In Certain Activities Or Transactions Relating To Iran—representation And Certifications 52.237-1, Site Visit 52.252-1, Solicitation Provisions Incorporated By Reference nrl Also Includes The Following Provisions That Must Be Completed And Returned By The Offeror: 1. Far 52.209-2, Prohibition On Contracting With Inverted Domestic Corporations- Representation. 2. Far 52.222-22, Previous Contracts And Compliance Reports 3. Far 52.222-25, Affirmative Action Compliance offerors Must Complete Annual Representations And Certifications On-line At Https://www.sam.gov/ In Accordance With Far 52.212-3, Offerors Representations And Certifications-commercial Products And Commercial Services. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. the Following Contract Far Clauses Apply To This Acquisition, Unless Not Applicable By Their Terms, In Which Case Shall Be Considered Self-deleting. Any Far Clause Erroneously, Or Otherwise, Omitted, That Which Should Have Been Included By Their Terms, Shall Be Considered To Be Incorporated Into This Solicitation And Any Resultant Contract: 52.212-4, Contract Terms And Conditions-commercial Products And Commercial Services 52.203-3, Gratuities 52.203-12, Limitation Of Payments To Influence Certain Federal Transactions 52.204-9, Personal Identity Verification Of Contractor Personnel 52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards 52.204-18, Commercial And Government Entity Code Maintenance 52.204-19, Incorporation By Reference Of Representations And Certifications 52.204-21, Basic Safeguarding Of Covered Contractor Information Systems 52.209-10, Prohibition On Contracting With Inverted Domestic Corporations 52.219-8, Option To Extend Services 52.217-9, Option To Extend The Term Of The Contract 52.219-28, Post-award Small Business Program Rerepresentation 52.232-1, Payments 52.232-8, Discounts For Prompt Payment 52.232-11, Extras 52.232-23, Assignment Of Claims 52.232-39, Unenforceability Of Unauthorized Obligations 52.232-40, Providing Accelerated Payments To Small Business Subcontractors 52.233-1, Disputes 52.233-3, Protest After Award 52.233-4, Applicable Law For Breach Of Contract Claim 52.243-1, Changes-fixed-price 52.247-34, F.o.b Destination 52.249-1, Termination For Convenience Of The Government (fixed Price)(short Form) 52.249-4, Termination For Convenience Of The Government (services)(short Form) 52.252-2, Clauses Incorporated By Reference 2. Far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders – Commercial Products And Commercial Services the Following Subparagraphs Of Far 52.212-5 Are Applicable, Unless Otherwise Not Applicable By Their Terms, In Which Case Shall Be Considered Self-deleting: 52.204-10 52.209-6 52.219-6 52.222-3 52.222-19 52.222-21 52.222-26 52.222-36 52.222-50 52.223-18 52.225-13 52.232-33 3. Dfars 212.301 - Solicitation Provisions And Contract Clauses For The Acquisition Of Commercial Products And Commercial Services Dod Class Deviation 2018-o0021, Commercial Item Omnibus Clause For Acquisitions Using The Standard Procurement System, Issued October 1, 2018 (revised October 1, 2018): Dod Class Deviation 2018-o0021 the Following Solicitation Dfars Provisions Apply To This Acquisition, Unless Not Applicable By Their Terms, In Which Case Shall Be Considered Self-deleting. Any Dfars Provisions Erroneously, Or Otherwise, Omitted, That Which Should Have Been Included By Their Terms, Shall Be Considered To Be Incorporated Into This Solicitation: 252.203-7005, Representation Relating To Compensation Of Former Dod Officials 252.204-7008, Compliance With Safeguarding Covered Defense Information Controls 252.204-7016, Covered Defense Telecommunications Equipment Or Services – Representation 252.204-7017, Prohibition On The Acquisition Of Covered Defense Telecommunications Equipment Or Services—representation 252.215-7007, Notice Of Intent To Resolicit the Following Solicitation Dfars Clauses Apply To This Acquisition, Unless Not Applicable By Their Terms, In Which Case Shall Be Considered Self-deleting. Any Dfars Clause Erroneously, Or Otherwise, Omitted, That Which Should Have Been Included By Their Terms, Shall Be Considered To Be Incorporated Into This Solicitation And Any Resultant Contract: 252.203-7000, Requirements Relating To Compensation Of Former Dod Officials 252.203-7002, Requirement To Inform Employees Of Whistleblower Rights 252.204-7003, Control Of Government Personnel Work Product 252.204-7009, Limitations On The Use Or Disclosure Of Third-party Contractor 252.204-7012, Safeguarding Covered Defense Information And Cyber Incident Reporting 252.204-7015, Notice Of Authorized Disclosure Of Information For Litigation Support 252.204-7018, Prohibition On The Acquisition Of Covered Defense Telecommunications Equipment Or Services 252.211-7003, Item Unique Identification And Valuation 252.211-7008, Use Of Government-assigned Serial Numbers 252.223-7008, Prohibition Of Hexavalent Chromium 252.225-7013, Duty-free Entry 252.227-7015, Technical Data - Commercial Products And Commercial Services 252.227-7037, Validation Of Restrictive Markings On Technical Data 252.232-7003, Electronic Submission Of Payment Requests And Receiving Reports 252.232-7006, Wide Area Workflow Payment Instructions 252.232-7010, Levies On Contract Payments 252.239-7010, Cloud Computing Services 252.239-7018, Supply Chain Risk 252.244-7000, Subcontracts For Commercial Products Or Commercial Services 252.246-7003, Notification Of Potential Safety Issues 252.246-7004, Safety Of Facilities, Infrastructure, And Equipment For Military Operations submission Instructions: all Quoters Shall Submit 1 (one) Copy Of Their Technical And Price Quote. include Your Company’s Unique Entity Id And Cage Code/n Cage Code On Your Quote. all Quotations Shall Be Sent Via E-mail. please Reference This Combined Synopsis/solicitation Number: N00173-24-q5629 On Your Correspondence And In The "subject" Line Of Your Email. all Questions Regarding The Solicitation Shall Be Submitted Via Email. the Government Intends To Award A Purchase Order As A Result Of This Combined Synopsis/solicitation That Will Include The Terms And Conditions Set Forth Herein. Award May Be Made Without Discussions Or Negotiations, Therefore Prospective Contractors Shall Have An Active Registration In The System For Award Management (sam) Database (www.sam.gov) In Accordance With Federal Acquisition Regulation (far) Part 4.1102 And Part 52.204-7 When Submitting A Response To This Solicitation. the Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. The Following Factors Shall Be Used To Evaluate Offers: lowest Price Technically Acceptable - Offers Will Be Ranked Lowest To Highest According To Price. A Price Analysis Will Be Conducted To Determine Whether The Lowest Price Will Result From A Single Award Or Multiple Awards. Based On The Price Analysis, The Lowest Price Offer Or Multiple Offers, Will Be Forwarded To The Requiring Activity For Technical Evaluation (offer(s), In Accordance With The Specifications, Will Be Deemed Either Technically Acceptable Or Technically Unacceptable). If The Lowest Price Offer Or Offers Is Found Technically Acceptable And The Pricing Determined Fair And Reasonable By The Contracting Officer, Evaluation Will Be Deemed Complete And Award Will Be Made Based On The Lowest Price Offer(s). If The Lowest Price Offer Is Determined Technically Unacceptable, Another Analysis Will Be Conducted Amongst The Remaining Offers To Determine If A Single Or Multiple Awards Will Provide The Lowest Price. The Lowest Price Offer(s) Will Be Sent For Technical Evaluation. This Process Is Repeated In Order Of Price Until An Offer Or Combination Of Offers Is Deemed Technically Acceptable And Price Is Determined Fair And Reasonable. options. When Applicable, The Government Will Evaluate Offers For Award Purposes By Adding The Total Price For All Options To The Total Price For The Basic Requirement. The Government May Determine That An Offer Is Unacceptable If The Option Prices Are Significantly Unbalanced. Evaluation Of Options Shall Not Obligate The Government To Exercise The Option(s). terms And Conditions. To Facilitate The Award Process, All Quotes Must Include A Statement Regarding The Terms And Conditions Herein As Follows: "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document Without Modification, Deletion, Or Addition." or "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document With The Exception, Deletion, Or Addition Of The Following:" exceptions. Quoter Shall List Exception(s) And Rationale For The Exception(s). submission Shall Be Received Not Later Than The Response Date Listed Above. Late Submissions Shall Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). Emailed Submissions Are Accepted And Are The Preferred Form Of Submission. Receipt Will Be Verified By The Date/time Stamp On Email. this Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, "streamlined Procedures For Evaluation And Solicitation For Commercial Products And Commercial Services," As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotations Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Solicitation Is A Request For Quotations (rfq). The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2024-03 effective: 23 February 2024 the Associated North American Industrial Classification System (naics) Code For This Procurement Is 541519, With A Business Size Standard Of 150. the Associated Federal Supply Code (fsc) / Product Service Code (psc) Procurement Is 7b21. the Naval Research Laboratory (nrl), Located In Washington Dc Is Seeking To Purchase Dell Computer Server Hardware ___see Attached Schedule Of Supplies/services Or _____ See Chart Below x See Specification Attachment supplies: Brand Name Or Equal. items Must Be Brand Name Or Equal In Accordance With Far 52.211-6. far 52.212-1 Has Been Tailored To Include The Following Additional Instructions: • This Procurement Is For New Equipment Only, Unless Otherwise Specifically Stated. No Remanufactured Or "gray Market" Items Are Acceptable. All Equipment Must Be Covered By The Manufacturer's Warranty. • Vendor Shall Be An Original Equipment Manufacturer (oem), An Oem Authorized Dealer, An Authorized Distributor, Or An Authorized Reseller For The Proposed Equipment/system Such That Oem Warranty And Service Are Provided And Maintained By The Oem. All Software Licensing, Warranty, And Service Associated With The Equipment/system Shall Be In Accordance With The Oem Terms And Conditions • Offerors Are Required To Submit Documentation From The Manufacturer Stating That They Are An Authorized Distributor For The Specific Items Being Procured. delivery Address: u.s. Naval Research Laboratory 4555 Overlook Avenue, S.w. bldg. 49 – Shipping/receiving code 3400 washington, Dc 20375 **fob Destination Is The Preferred Method** estimated Delivery Time: __________________ for Fob Orgin, Please Provide The Following Information: fob Shipping Point: _______________________ estimated Shipping Charge: _________________ dimensions Of Package(s): ____________________ shipping Weight: __________________________ the Following Far & Dfars Provisions And Clauses As Identified Below Are Hereby Incorporated. Any Far & Dfars Provisions Or Clauses Not Applicable By Their Terms Shall Be Self-deleting. Any Far Or Dfars Provisions Or Clause(s) Erroneously, Or Otherwise, Omitted, That Which Should Have Been Included By Their Terms, Shall Be Considered To Be Incorporated Into This Solicitation And Any Resultant Contract. the Full Text Of Far & Dfars Provisions And Clauses May Be Accessed Electronically At https://www.acquisition.gov. The Clauses And Provisions Identified Below Are To Be Considered The Most Up-to-date Version, As Accessible At Https://www.acquisition.gov/. 52.203-11, Certification & Disclosure Regarding Payments To Influence Certain Federal Transactions 52.203-18, Prohibition On Contracting With Entities That Require Certain Internal Confidentiality Agreements Or Statements—representation 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements 52.204-7, System For Award Management 52.204-16, Commercial And Government Entity Code Reporting 52.204-17, Ownership Or Control Of Offeror 52.204-20, Predecessor Of Offeror 52.204-24, Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment – Attached Below To Be Completed And Returned With Quote/proposal. 52.204-26, Covered Telecommunication Equipment Or Services - Representation 52.209-11, Representation By Corporations Regarding Delinquent Tax Liability Or A Felony Conviction Under Any Federal Law 52.211-14, Notice Of Priority Rating For National Defense, Emergency Preparedness, And Energy Program Use 52.212-1, Instructions To Offerors-commercial Products And Commercial Services 52.212-3, Offerors Representations And Certifications-commercial Products And Commercial Services 52.217-5, Evaluation Of Options 52.219-1, Small Business Program Representations 52.223-22, Public Disclosure Of Greenhouse Gas Emissions And Reduction Goals—representation 52.225-18, Place Of Manufacture 52.225-25, Prohibition On Contracting With Entities Engaging In Certain Activities Or Transactions Relating To Iran—representation And Certifications 52.237-1, Site Visit 52.252-1, Solicitation Provisions Incorporated By Reference nrl Also Includes The Following Provisions That Must Be Completed And Returned By The Offeror: 1. Far 52.209-2, Prohibition On Contracting With Inverted Domestic Corporations- Representation. 2. Far 52.222-22, Previous Contracts And Compliance Reports 3. Far 52.222-25, Affirmative Action Compliance offerors Must Complete Annual Representations And Certifications On-line At Https://www.sam.gov/ In Accordance With Far 52.212-3, Offerors Representations And Certifications-commercial Products And Commercial Services. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. the Following Contract Far Clauses Apply To This Acquisition, Unless Not Applicable By Their Terms, In Which Case Shall Be Considered Self-deleting. Any Far Clause Erroneously, Or Otherwise, Omitted, That Which Should Have Been Included By Their Terms, Shall Be Considered To Be Incorporated Into This Solicitation And Any Resultant Contract: 52.212-4, Contract Terms And Conditions-commercial Products And Commercial Services 52.203-3, Gratuities 52.203-12, Limitation Of Payments To Influence Certain Federal Transactions 52.204-9, Personal Identity Verification Of Contractor Personnel 52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards 52.204-18, Commercial And Government Entity Code Maintenance 52.204-19, Incorporation By Reference Of Representations And Certifications 52.204-21, Basic Safeguarding Of Covered Contractor Information Systems 52.209-10, Prohibition On Contracting With Inverted Domestic Corporations 52.219-8, Option To Extend Services 52.217-9, Option To Extend The Term Of The Contract 52.219-28, Post-award Small Business Program Rerepresentation 52.232-1, Payments 52.232-8, Discounts For Prompt Payment 52.232-11, Extras 52.232-23, Assignment Of Claims 52.232-39, Unenforceability Of Unauthorized Obligations 52.232-40, Providing Accelerated Payments To Small Business Subcontractors 52.233-1, Disputes 52.233-3, Protest After Award 52.233-4, Applicable Law For Breach Of Contract Claim 52.243-1, Changes-fixed-price 52.247-34, F.o.b Destination 52.249-1, Termination For Convenience Of The Government (fixed Price)(short Form) 52.249-4, Termination For Convenience Of The Government (services)(short Form) 52.252-2, Clauses Incorporated By Reference 2. Far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders – Commercial Products And Commercial Services the Following Subparagraphs Of Far 52.212-5 Are Applicable, Unless Otherwise Not Applicable By Their Terms, In Which Case Shall Be Considered Self-deleting: 52.204-10 52.209-6 52.219-6 52.222-3 52.222-19 52.222-21 52.222-26 52.222-36 52.222-50 52.223-18 52.225-13 52.232-33 3. Dfars 212.301 - Solicitation Provisions And Contract Clauses For The Acquisition Of Commercial Products And Commercial Services Dod Class Deviation 2018-o0021, Commercial Item Omnibus Clause For Acquisitions Using The Standard Procurement System, Issued October 1, 2018 (revised October 1, 2018): Dod Class Deviation 2018-o0021 the Following Solicitation Dfars Provisions Apply To This Acquisition, Unless Not Applicable By Their Terms, In Which Case Shall Be Considered Self-deleting. Any Dfars Provisions Erroneously, Or Otherwise, Omitted, That Which Should Have Been Included By Their Terms, Shall Be Considered To Be Incorporated Into This Solicitation: 252.203-7005, Representation Relating To Compensation Of Former Dod Officials 252.204-7008, Compliance With Safeguarding Covered Defense Information Controls 252.204-7016, Covered Defense Telecommunications Equipment Or Services – Representation 252.204-7017, Prohibition On The Acquisition Of Covered Defense Telecommunications Equipment Or Services—representation 252.215-7007, Notice Of Intent To Resolicit the Following Solicitation Dfars Clauses Apply To This Acquisition, Unless Not Applicable By Their Terms, In Which Case Shall Be Considered Self-deleting. Any Dfars Clause Erroneously, Or Otherwise, Omitted, That Which Should Have Been Included By Their Terms, Shall Be Considered To Be Incorporated Into This Solicitation And Any Resultant Contract: 252.203-7000, Requirements Relating To Compensation Of Former Dod Officials 252.203-7002, Requirement To Inform Employees Of Whistleblower Rights 252.204-7003, Control Of Government Personnel Work Product 252.204-7009, Limitations On The Use Or Disclosure Of Third-party Contractor 252.204-7012, Safeguarding Covered Defense Information And Cyber Incident Reporting 252.204-7015, Notice Of Authorized Disclosure Of Information For Litigation Support 252.204-7018, Prohibition On The Acquisition Of Covered Defense Telecommunications Equipment Or Services 252.211-7003, Item Unique Identification And Valuation 252.211-7008, Use Of Government-assigned Serial Numbers 252.223-7008, Prohibition Of Hexavalent Chromium 252.225-7013, Duty-free Entry 252.227-7015, Technical Data - Commercial Products And Commercial Services 252.227-7037, Validation Of Restrictive Markings On Technical Data 252.232-7003, Electronic Submission Of Payment Requests And Receiving Reports 252.232-7006, Wide Area Workflow Payment Instructions 252.232-7010, Levies On Contract Payments 252.239-7010, Cloud Computing Services 252.239-7018, Supply Chain Risk 252.244-7000, Subcontracts For Commercial Products Or Commercial Services 252.246-7003, Notification Of Potential Safety Issues 252.246-7004, Safety Of Facilities, Infrastructure, And Equipment For Military Operations submission Instructions: all Quoters Shall Submit 1 (one) Copy Of Their Technical And Price Quote. include Your Company’s Unique Entity Id And Cage Code/n Cage Code On Your Quote. all Quotations Shall Be Sent Via E-mail. please Reference This Combined Synopsis/solicitation Number: N00173-24-q5629 On Your Correspondence And In The "subject" Line Of Your Email. all Questions Regarding The Solicitation Shall Be Submitted Via Email. the Government Intends To Award A Purchase Order As A Result Of This Combined Synopsis/solicitation That Will Include The Terms And Conditions Set Forth Herein. Award May Be Made Without Discussions Or Negotiations, Therefore Prospective Contractors Shall Have An Active Registration In The System For Award Management (sam) Database (www.sam.gov) In Accordance With Federal Acquisition Regulation (far) Part 4.1102 And Part 52.204-7 When Submitting A Response To This Solicitation. the Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. The Following Factors Shall Be Used To Evaluate Offers: lowest Price Technically Acceptable - Offers Will Be Ranked Lowest To Highest According To Price. A Price Analysis Will Be Conducted To Determine Whether The Lowest Price Will Result From A Single Award Or Multiple Awards. Based On The Price Analysis, The Lowest Price Offer Or Multiple Offers, Will Be Forwarded To The Requiring Activity For Technical Evaluation (offer(s), In Accordance With The Specifications, Will Be Deemed Either Technically Acceptable Or Technically Unacceptable). If The Lowest Price Offer Or Offers Is Found Technically Acceptable And The Pricing Determined Fair And Reasonable By The Contracting Officer, Evaluation Will Be Deemed Complete And Award Will Be Made Based On The Lowest Price Offer(s). If The Lowest Price Offer Is Determined Technically Unacceptable, Another Analysis Will Be Conducted Amongst The Remaining Offers To Determine If A Single Or Multiple Awards Will Provide The Lowest Price. The Lowest Price Offer(s) Will Be Sent For Technical Evaluation. This Process Is Repeated In Order Of Price Until An Offer Or Combination Of Offers Is Deemed Technically Acceptable And Price Is Determined Fair And Reasonable. options. When Applicable, The Government Will Evaluate Offers For Award Purposes By Adding The Total Price For All Options To The Total Price For The Basic Requirement. The Government May Determine That An Offer Is Unacceptable If The Option Prices Are Significantly Unbalanced. Evaluation Of Options Shall Not Obligate The Government To Exercise The Option(s). terms And Conditions. To Facilitate The Award Process, All Quotes Must Include A Statement Regarding The Terms And Conditions Herein As Follows: "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document Without Modification, Deletion, Or Addition." or "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document With The Exception, Deletion, Or Addition Of The Following:" exceptions. Quoter Shall List Exception(s) And Rationale For The Exception(s). submission Shall Be Received Not Later Than The Response Date Listed Above. Late Submissions Shall Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). Emailed Submissions Are Accepted And Are The Preferred Form Of Submission. Receipt Will Be Verified By The Date/time Stamp On Email.

Closing Date19 Apr 2024

Tender AmountRefer Documents

Caraga Regional Hospital Tender

Healthcare and Medicine

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Bids And Awards Committee Ooooooo ----------------------------------------------------------------------------------------------------------------------------- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Invitation To Bid Ib No. 2024-07-17 (42) Supply And Delivery Of C-arm Imaging Machine Abc: ₱ 13,000,000.00 ======================================================== 1. The Caraga Regional Hospital (crh), Through The General Appropriation Act (gaa), Hfep - Saa No. 2024-02-0271. Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of Thirteen Million Pesos Only Under The Contract For The Procurement Of Supply And Delivery Of C-arm Imaging Machine. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding, To Wit: Item No. Description Quantity Unit Of Measure Unit Cost Total Cost 1 C-arm Machine 1 Unit 13,000,000.00 13,000,000.00 C-arm Machine Description Patient Category A Mobile (within An Imaging Facility) General-purpose Diagnostic Fluoroscopic X-ray System That Uses A C-arm And Digital Techniques For Image Capture, Display And Manipulation And Is Designed To Be Used In A Variety Of General-purpose Applications Requiring Real-time Fluoroscopic Imaging Capabilities. It Includes Spot-film Capabilities In Addition To The Fluoroscopic Features And Is Intended To Optimize The Capability Of Users To Visually And Quantitatively Evaluate The Anatomy And Physiological Function Of Various Targeted Body Areas In Real-time. It Is Frequently Used In Conjunction With An Ingested Or Injected X-ray Contrast Medium. Images Can Be Both Real-time And Delayed Formats. Purpose Of Use Clinical Or Other Purpose To Enable Users To Visually And Quantitatively Evaluate The Anatomy And Physiological Function Of Various Targeted Body Areas In Real-time Clinical Department /ward Ambulatory Surgery Unit Technical Specifications • Description: Low Dose, Mobile Type Flat Panel Detector Technology Type Aec / Intelligent Dose Control Function Available Automatic Brightness Control (abs) Function Available Collimator Configured With Function Of One Key In Positioning, And The Field Of View Is Adjustable • Continous And Pulse Fluoroscopy Electrical Supply: High Frequency Generator, Inverter Type Power Supply: Single Phase, 220 To 240 V At 60 Hz Nominal Maximum Output : 1.5 Or 2 Kw Input Power : 220 Volts Tube Voltage : 40 To 110 Kv Tube Current : At Least 20 Ma Mas Setting : 200 Or Higher Fluoroscopic Tube Current : 10ma Or Lower Frame Rate :12.5 10, 7.5, 5, 3, 2, 1 Fps • C-arm Movement Angulation : At Least From +90 Degrees Axial Rotation: +260º Or Better And -100º Or Better Source-to-image Distance : At Least 90 Cm Movement (vertical) : At Least 45 Cm Movement (longitudinal) : At Least 20 Cm Movement (panning/swivel): At Least 10 Degrees Cable Deflectors : Present Steering : Rear Wheel, Foot Switch Brake : Present For All Movements, Manual • Mechanical Part: Orbital Movement: ≥ 130 ° Revolution Around Horizontal Axis: ±195 ° Ascending & Descend: 0mm ~ 400mm Forward And Backward Movement: 0 Mm ~ 200 Mm Revolution Around Vertical Axis: ±15 ° C-arm Opening: 800mm C-arm Arc Depth: 640mm Focus Screen Distance (sid): 1000mm Structure: Single Row, 2-connected, Wired Mode: Fluoroscopy Mode, Radiography Mode Water Proof Level: Ip68 • Flat Panel Detector: Detector Type: A-si Epid (amorphous Silicon Imaging Device) Scintillator Material: Csi (cesium Iodide) Images Size: About 9” X 9” Maximum Pixel Matrix: 1024*1024 Pixels Minimum Pixel Spacing: 200μm Radiography Spatial Resolution: ≥2.5l P/mm, 16bits Fluoroscopy Spatial Resolution: ≥1.8l P/mm Maximum Frame Rate Of Pulse Fluoroscopy: 15fp/s Fluoroscopy Image Stabilization Time: ≤2s Imaging Time: Radiography Mode: ≤1.5s Pulse Fluoroscopy Mode: ≤0.5s Continuous Fluoroscopy Mode: ≤0.5s • Image Intensifier Image Intensifier : 9/6-inch, 2 Field Of View Switchable, Or 6/4 Inch, 2 Field Of View Switchable Or Better Beam-hardening Filter: Present Image Brightness: Real-time Automatic Adjustment • Monitor Cart Monitor: Dual Lcd Monitors At Least 19” In Size • Computer Hardware Boot Time: Less Than 1 Minute Dicom Store And Retrieve: Capable For Dvd, Pacs, And Usb, Image Storage Commit With Pacs Confirmation Image Accessibility Features: Full-size Or Half-size Adjustable, Web Viewable, Jpeg And Bmp Compatible, Dicom Compatible, De-identifiable Dicom Images, Removable Patient Information Image Directory: System Shall Be Able To Copy, Delete, Retrieve And Review, Accessible To The Touch Control Or Workstation Digitization Depth: 12 Bits Or Higher Image Processing Features: System Shall Automatically Adjust Vascular And Cardiac Imaging Presenting 30% Less Noise For An Equivalent Appearance Of 30 Kw Power System, Adjust Noise Filter When No Motion Is Present In The Image; Adjust Image Quality Based On Presence Of Motion, Minimize The Effect Of Metals On Image Sharpness Or Quality, Automatically Adjust Brightness And Contrast, Allow User To Adjust Sensitivity Levels For Optimum Image Quality When Metal Is Present In The Imaging Field, Select The Optimum Imaging Technique By Varying Gain, Kvp, And Ma, Adjust To Anatomical Size And Location To Provide Uniform Image Quality Throughout The Entire Image, Sense The Collimator Position Operating System: Latest Version Licensed Os Processor: At Least Core I9 At 4 Ghz Ram: Expandable At The Minimum Of 64 Gb Rom: Expandable 1 Tb Ssd Capable Of Storing Atleast 20,000 Images Storage Image Matrix: Not More Than 1500 Pixels X 1500 Pixels Output Media: Dvd-r, Cd-r, Usb Usb Port: At 4 Four High Speed Usb 3.0 Ports • Additional C-arm Specifications:  C-arm Body Not More Than 85 Cm In Width  C-arm Machine Shall Have Electronic Locking System To Avoid Accidental Exposure Foot Switch Operation. • Generator: Output Power: 5kw Tube Voltage Range: 40kv ~ 120kv Tube Current: Radiography Mode: 1ma ~ 100ma Pulse Fluoroscopy Mode: 0.5ma ~ 13ma Continuous Fluoroscopy Mode: 0.5ma ~ 6ma • X-ray Tube Anode: Rotating Anode Tube With Dual Focus Tube Voltage: 130kv Tube Power: 5kw / 17kw Focus Size: 0.3mm/0.6mm Anode Target Angle: 10 ° Maximum Anode Heat Capacity: 150kj (200khu) Heat Capacity Of X-ray Tube: 1000kj (1333.34kku) Cooling Method: Natural Cooling • Collimator: Collimator Control: Motorized Square Range: 210mm*210mm At Sid 1000mm • Mobile Console: Input Voltage: Ac 220 V, 50 Hz / 60 H Monitor In C-arm Unit: Display Size: 19 Inches Type: Color, 16.7m Resolution: 1280 * 1024 Mobile Console Display: Screen Size: 27 Inches , Type: Color, 1.07 Billion, Resolution: 2560 * 1440 • Grid: Focus: 100cm Grid Ratio: 10: 1 Size: 240mm * 240mm • Workstation & Imaging System: Patient Management: Manual Registration And Worklist Automatic Query Registration. Patient Data Modification Function: A Temporary Patient Can Be Set By Physician And The Data Of The Temporary Patient Can Be Modified. Apparatus Programmed Radiography (apr): After Selecting The Position On The Software, The Software Displays The Recommended Exposure Parameters. Image Acquisition: Static Image Acquisition, Dynamic Image Acquisition, Video Storage, Video Playback, Image Automatic Window Adjustment, Image Manual Window Adjustment, Video Manual Window Adjustment. Image Processing: Image Correction, Image Reversal. Image Observation: View Static Image, View Dynamic Image, Video Frame Extraction, Image Data Measurement, Window Width And Window Level Adjustment, Image Flip, Image Rotation, Image Scaling, Image Restoration. Local Magnification Of Fluoroscopy Image: It Can Be Magnified In Three Levels, 1.5 Times, 2 Times And 3 Times Respectively. Secondary Screen Locking Function: In Video Acquisition Or Playback, The User Can Select A Frame From The Video Image And Lock It On The Sub Screen As A Reference Image For Operation. Ball Tube Indication Function: The Software Has The Function Of Real-time Indicating The Heat Capacity Of The Ball Tube. Dose Statistics: Dose Statistics And Dap Display During The Acquisition Process; Dose Statistical Analysis Report. Medical Record Report: Automatic Loading Of Patient Information And Expert Template. Film Printing: Support Dicom3.0 Standard Laser Camera Printing. Dicom Transmission: Single Image Can Be Sent To Any Pacs And Workstation Following Dicom3.0 Standard. Parameter Adjustment Of Beam Limiter: The Opening Size Of X And Y Blades Of The Beam Limiter Can Be Controlled In The Software Interface To Adjust The Radiation Field. Technical Services As Follows: • System Warranty Must Be (5) Years • Calibration Of The Unit Must Be Performed After Installation With Certificate • Service Call Within 24 Hours Maximum • Preventive Maintenance For Every Quarter Until Warranty Expires. • Service Kits And Consumables To Be Included For One Year Use. • Supplier Must Deliver And Install The Unit Without Cost To The Owner • Training Of End-users And Biomed Engineer Must Be Done On-site With Minimum Of 4 Days Period. Physical/chemical Characteristics • • 1 Unit Auto-volt 110 And 220v 5000 Watts Avr Compatible To The Machine • 3 Sets Lead Gown With Thyroid Shield, Large • 3 Sets Lead Gown With Thyroid Shield, Medium • 3 Sets Lead Goggles With Thyroid Shield, Large And Medium Accessories, Consumables, Spare Parts, Other Components • Must Be Supplied With Protective Dust Cover At Least For Control Panel • To Be Supplied With Adult Size Protective Lead Apron • 1 Usb With A Minimum Of 64gigabyte Memory • List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Training, Installation And Utilisation Pre-installation Requirements Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirements For Commissioning Local Clinical Staff To Affirm Completion Of Installation, Calibration Certificate And Warranty Certificate Training Of User/s Training Of Users And Biomed Engineer & Staff In Operation And Basic Maintenance Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Warranty And Maintenance Warranty • 5 Years For Collimator • 5 Years For Parts And Labor • Shall Have Spare Parts Availability Within 5 Years Environmental Factors • Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg Celsius And Relative Humidity Of 15 To 90%. • Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg Celsius And Relative Humidity Of 15 To 90% Documentation Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Safety And Standards International Standards Certified In At Least One Of The Following: Iso 13485:2003 Medical Devices -- Quality Management Systems -- Requirements For Regulatory Purposes (australia, Canada And Eu) Iso 14971:2007 Medical Devices -- Application Of Risk Management To Medical Devices Iec 60601-1:2012 Medical Electrical Equipment - Part 1: General Requirements For Basic Safety And Essential Performance Iec 60601-1-1:2000 Medical Electrical Equipment – Part 1-1: General Requirements For Safety - Collateral Standard: Safety Requirements For Medical Electrical Systems Iec 60601-1-2:2007 Medical Electrical Equipment - Part 1-2: General Requirements For Basic Safety And Essential Performance - Collateral Standard: Electromagnetic Compatibility - Requirements And Tests Iec 60601-2-37:2007 Medical Electrical Equipment - Part 2-37: Particular Requirements For The Basic Safety And Essential Performance Of Ultrasonic Medical Diagnostic And Monitoring Equipment Iec 61391-1:2006 Ultrasonics - Pulse-echo Scanners - Part 1: Techniques For Calibrating Spatial Measurement Systems And Measurement Of System Point-spread Function Response Iec 61391-2:2010 Ultrasonics - Pulse-echo Scanners - Part 2: Measurement Of Maximum Depth Of Penetration And Local Dynamic Range Iec 62359 :2010 Ultrasonics - Field Characterization - Test Methods For The Determination Of Thermal And Mechanical Indices Related To Medical Diagnostic Ultrasonic Fields Delivery Period 60 Calendar Days From Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Post Qualification Site Visit To Nearest Hospital. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed.) Service Center Must Have Service Center Within Caraga Region, Cebu City, Cdo Or Davao City. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3. (ra 9184) The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. Slcc Must Be Within 5 Years From The Submission Of Bids. (based On The Completion Date). Slcc Shall Be The Same Or Similar In Nature. Similar In Nature Means, The Bidder Shall Have An Slcc Of Any Imaging Equipment. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, At Procurement Section, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On June 20, 2024 – July 17, 2024 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference July 2, 2024 At 2:00 O’clock In The Afternoon Via Zoom Platform Join Zoom Meeting Https://us06web.zoom.us/j/88572944755?pwd=xoibnip2w2buvy04idmlkbe19ctl5y.1 Meeting Id: 885 7294 4755 Passcode: 889426 Deadline Of Submission Of Bids July 17, 2024 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com . Opening Of Bids July 17, 2024 At 2:00 P.m. Via Zoom Platform. Link For The Opening Of Bids Shall Be Provided To The Qualified Bidders Only Or Those Who Purchase The Bidding Documents. Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/158ek0uc4hb7rylgs1teq3hxz1vdo72z6?usp=sharing Payment Of Bidding Documents Php 25,000.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before July 17, 2024 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On July 17, 2024 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted. 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com. 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Please Fill Up The Caraga Regional Hospital Supplier’s Registry To This Link: Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 Direct Line: (086) 826-9058 Mobile Nos. 09850508783 (smart/tnt) 09539212832 (globe/tm) E-mail Address: Crhprocurement.bac@gmail.com Approved By: (sgd) Atty. Ma. Flordelin T. Ensomo, Cpa Attorney Iv Chairman, Bids And Awards Committee

Closing Date17 Jul 2024

Tender AmountPHP 13 Million (USD 223.2 K)

City Of Bais Tender

Details: Description Republic Of The Philippines City Of Bais -o0o- Bids And Awards Committee Invitation To Apply For Eligibility And To Bid The City Government Of Bais Invites Interested Bidders To Apply For Eligibility And To Bid For Cpicad, Viz: Item Approved Budget For The Contract (abc) J/sor No. 119-24 Php 12,740,000.00 Supply Of Ict Equipment And Network Infrastructure With Provision Of Customized Bais City Gad Database Equipped With Registry Of Barangay Inhabitants And Migrants Profiling Systems With Technical Specifications, To Wit; 1.computer Hardware Delivery (brand New) For The 35 Barangays In Lgu City Of Bais 35 Units Computer (desktop) Processor: Amd/intel Processor Ram: 8gb Built-in Wifi/ethernet/usb Ports/hdmi Keyboard / Mouse / Avr 21/23” Monitor Led Display 2.computer Peripherals Delivery (brand New) For The 35 Barangays In Lgu City Of Bais 35 Pcs. Web Camera- 1080/720p, Autofocus 35 Pcs. Ink Tank Colored Printer In 4 Color Modes- Ultra High Page Yield 35 Pcs. Qr / Barcode Printer For Household Tags – A6 Printer, Usb Plug, Thermal Printer 3.computer Accessories Delivery (brand New) For The 35 Barangays In Lgu City Of Bais 35 Pcs. Ring Light – Led 24w Photo Studio Light With Tripod Selfie Stick 35 Pcs. A4 Cutter With Laser Guide For Barangay Clearance & Certificate 35 Pcs. A3 Hot/cold Laminating Machine 35 Pcs. Pvc Id Cutter – Heavy Duty 86*54mm Atm Card Size Cutter 35 Boxes. Thermal Paper Sticker (waterproof) – A6 Thermal Adhesive Label Paper For Household Qr Tags – 500 Pcs. Inside Per Box 35 Boxes. Id Plastic Lamination- Id Laminating Film For Barangay Id-65mm X 95mm 250 Microns, 100 Sheets Per Box 35 Packs 120 Gsm Double Sided Photo Paper – Premium Glossy, 50 Sheets/packs 35 Reams A4 Bond Paper – 500 Sheets/ream, 70 Gsm 4. Recommended Customised Database Program Standard Features & Functionalities For The 35 Local Barangays That Interlink To The Office Of The Mayor Create A Registry Of Barangay Inhabitants And Migrants Masterfile For The Primary Purpose Of Registering Residents And Migrants In Local Barangays. (this Is The Central Repository For All Of The Records, Which Is Vital When Establishing Correct Reports And Information When It Is Required To Do So.) 4.1 Ensure A Security Feature Such As A Username And Password Before Logging In To Prevent Information Breaches, Which Are Crucial And Critical. Make Sure That The Password Can Be Changed In Accordance With The Preferences Of The End-users. 4.2 Develop A Master File Record Module That Accepts Resident, Migrant, And Immigrant Entries Based On Local Government Indicators And Socioeconomic Profiling, Tailored To Specific Geography. (see A Separate Article For Local Government-specific Fit Indicators.) 4.3 A Master File Record Has The Capability To Produce Barangay Ids And Migrant Ids In Order To Facilitate Social Benefit Services, Monitoring, And Requirements. 4.4 Establish A Take-a-shot Button That Is Associated With Your Webcam Device As A Procedure To Capture A Facial Photograph. 4.5 The Ids Are Capable Of Generating Qr Codes Containing The Complete Name Of The Bearer And A Unique Barcode. 4.6 The Id Generation Process Will Feature A Preview Mode That Displays The Complete Composite Layout Of The Actual Id In Both Front And Back. 4.7 The Generated Ids Qr Codes Are Readable By The Webcam Of The Computer, Eliminating The Need For An Additional Peripheral. 4.8 The Webcam Scans Id Qr Codes Without Third-party Readers, Displays Registered Person Profile Information In A Pop-up Window, And Serves As A Substitute For Manual Name Search In Records Updates. 4.9 To Prevent Counterfeiting, Barangay And Worker’ Id Security Prints Should Feature An Ornate Pattern Layout Using A Composite Guilloche Decorative Technique. 4.10 The Database Program Must Save Each Resident, Migrant, Or Immigrant Record In The Mater File’s Registry Every Time The End User Encodes It, Ensuring An Easy-to-use System And Immediate Record Saving In Case Of Power Outages Without Relying On The Traditional “save” Button. 4.11 The Masterfile Module Registry Should Be Capable Of Classifying House And Household Members And Generating Qr Codes Based On General And Specific Summary Listings. 4.12 Your Webcam Can Scan The Generated House And Household Member Qr Codes, And Once Recognized, It Will Display All The Information In A Summary List Without The Need For Manual Encoding Of The House And Household Numbers. 4.13 The Master File Registry Can Maintain, Store, Update, And Remove A Record Depending On The Status Issued By A Local Court, Lupon Ng Tagapamayapa, Or Other Relevant Contents With Titles That Can Be Changed Based On The Nature Of The Documentation. 4.14 Add Dynamic Drop-down Menu Combo Box Entries To The Master File Registry To Allow End Users To Add, Amend, Or Delete Field Names Based On Lgu-required Indicators. 4.15 A Delete Dialog Window Should Be Provided Under The Registry Of File Master File To Perform A Complete Deletion Of A Record. However, The End-user Should Be Warned That The Record May Have Some Important Official Barangay Documents Applied Before The Delete Command Is Carried Out. 4.16 The Database System Can Generate A Printable Database Build-up Form Template That Includes Essential Information Required For The Survey Of Each Household Member And For Local Barangay Officials To Initiate Database Record Generation. 4.17 Create A Transaction History For Each Record With The Frequency Number Applied, Processed, And Issued. This Prevents Fraudulent Applications Based On Request Method And Purpose. 4.18 Provide An Export Button Command In The Master File Registry That Converts All Indicators In The Records To Pdf, Csv, Or Worksheet Formats. This Is Great For A Stand-alone Database Program Without A Cloud Version Due To Internet Issues. 5. Develop A Panel Dashboard For Password Management, Activation And License Codes, Punong Barangay, And A Global Dynamic Content Template For Barangays And Clearances. 5.1 Develop A Component That Dynamically Accepts The New Name Of The Punong Barangay And Includes An Option To Record Their Signature, Which Will Be Included In The Ids, Barangay Clearances, And Certificates. 5.2 In Order To Prevent Piracy Of Software, The Database Program Used At Each Barangay Level Needs To Issue One-of-a-kind Licensing And Activation Numbers Based On Area, The Province, The City Or Municipality, And The Barangay Names. 5.3 The Database Application Can Digitally Archive All Barangay Documents, Such As Clearances And Certifications Regardless Of The Newly Elected Punong Barangay After The Election. Even After They Have Been Replaced, The Database Application Retains Information Related To The Issuance Of Barangay Clearance And Certificates During The Punong Barangay’s Term. 5.4 Create A Data Privacy Waiver Document/template During Database Build-up That Can Be Distributed To Every Household Member. 5.5 Create Dynamic Content That Creates Default Content For Official Barangay Certificates And Clearances Depending On Barangay-specific Fit Values. 6. Create A Dynamic System That Issues Certificates And Clearances For Barangays. 6.1 Develop A System Module For Generating Barangay Certificates And Clearances Dynamically Changing Titles And Composing Unique Contents Based On The Document’s Nature. 6.2 To Prevent Counterfeiting, The Barangay Clearance And Certificate Layout Should Feature A Guilloche Composite Wavy Pattern Arrangement, Qr Code, And Barcode. 6.3 Provide A Screen Preview Of The Barangay Certificate And Clearance That The End-users Can Review Before Printing To A Hard Copy. 6.4 When The Qr Code On The Barangay Id Is Scanned Using A Camera, The Database System Is Able To Automatically Read The Person’s Profile And Generate Official Barangay Documents Without The Need For The Person’s Name To Be Typed In Manually. The Barangay Clearance And Certificate Are Integrated With The Barangay Id. 6.5 Create Database Alerts That Will Show The Last Known Application Date, Timestamp, And The Number Of Documents That Were Located That Were Connected To That Person’s Record. 7. Create A Dynamic System That Issues Barangay Business Clearance For The Mayor’s Permit Application. 7.1 Create A Barangay Business Clearance Application To Renew And Register A New Business, Determining Owner Or Representative Status And Linking Master File Registry Records To Registration. 7.2 The Barangay Business Clearance Application Can Be Generated By The Database System Through The Detection Of The Qr Code On The Barangay Id Using A Camera. This Process Eliminates The Requirement Of Manually Typing The Applicant’s Name. 7.3 Using The Official Email Address Of Local Bplo, Develop A Button That Links The Barangay Business Clearance Application To The Business Permit Licensing Office (bplo). The Internet Will Be Needed For This. In An Instance Of Poor Internet Connectivity, The System Has An Ability To Export Pdf Files. 7.4 Create A Business Application Where The Title, Content, And Remarks Are All Customizable. 7.5 Before Printing Can Start, The Database System Needs To Generate A Composite Layout Featuring A Guilloche-wavy Design. This Initiative Increases Security Measures And Prohibits The Creation Of Counterfeit Permits Or Certificates For Barangay Business Clearance. 7.6 A Barcode And Qr Code Summarizing The Company Name, Its Validity, And Other Crucial Details Must Be Included In The Business Clearance And Certificate. 8. Ensure A Gender And Development (gad) Database Dashboard Which Allows The Generation Of Different Reports For Socioeconomic Profiling And With Each Report Being Based On A Parameter That Applies To An Individual Or Household. 8.1 The Gad Database Has The Capability To Produce Individualized Dashboards For Each And Every Record, Household, Grouping, Or Type That Correspond To The Age And Gender Criteria Used For Socioeconomic Profiling, And Using The Lgu-supplied Indicators As Data. (for The Incorporation Of Tailored Fit Indicators, Kindly Consult With Or Collaborate With The Heads Of Various Government Departments.) 8.2 The Gad Report Has The Capability To Present The Survey Indicators In Accordance With The Selected Options From The Drop-down Menu, Specifically Categorized By Category, Classification, And Information. 8.3 It Is Possible To Export Gad Reports In A Format. The Full Summary Of The Grand Total Result Can Be Printed Out In Pdf File Type Format, And This Can Be Done Based On The Entries In The Master File. 9. Recommended Hardware And Database System For The Mayor’s Office And The City Population Information And Community Affairs Division (cpicad) That Interlink To The Barangays. Inertactive Display Tv Delivery (brand New) For The Mayor’s Office In Lgu City Of Bais Type Of Smart Tv 9.1 Display 65” /75” Connectivity: Hdmi Ver. 2.0, Usb, Wifi, Bluetooth, Touch Function, Multi-touch, 32gb Storage 10. Database Software Delivery (cloud Computing) For The Mayor’s Office And The Cpicad In The City Of Bais That Connects To The Barangays 10.1 Establish A Unique Username And Password Within The Mayor’s Portal As A Prerequisite For Obtaining, Authorization To Access Various Levels Of The Barangay System. 10.2 Document Verification Of Barangay Clearance And Certifications From Different Levels For Authenticity. 10.3 Create A Comprehensive Dashboard Featuring A Range Of Gender And Development (gad) Reports, Categorized According To Specific Indicators Customized For Each Individual Record Or Household, Is Currently Underway. This Initiative Aims To Provide Registered Inhabitants With A User-friendly Interface That Enables Easy Access To Pertinent Information. 10.4 Provide Reporting Based On The Classification Of Indicators Selected Under The Gad Dashboard Button Or Choices. 11. Provide Information And Access To Authorized Departments Of Local Government. 11.1 Create A Weblink With Security Access That Provides Socioeconomic Profiling Information Related To Planning And Development For The Local Population Commission. 12. Training Requirements For The End-users Regarding The Operation, Security, And Data Privacy Issues. Bid Validity Period: 120 Days Contract Duration: 60 Days The Approved Budget For The Contract Is To Be Taken From Gad Capital Outlay (2022). Partial Bids Are Allowed, However, Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. In Order To Qualify, Bidders Should Conform To The Eligibility Criteria As Prescribed Under Sec. 23 And 25 Of The Revised Irr-a Of R.a. 9184. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary "pass/fail" Criteria As Specified In The Revised Irr-a Of R.a. 9184. As Such Non-submission Of Any Of The Required Documents Will Result In The Disqualification Of The Bidder. Due To Covid-19 Pandemic And Quarantine Regulations Of Every Provinces, Presence Of The Bidders Is Not Necessary. The Bids And Awards Committee (bac) Allows The Submission Of Bids Through Electronic Means And Submission Through Courier Services. The Following Documents Are Required For Submission: A.eligibility Documents Including Technical Documents (1st Envelope): 1.registration Certificate From Dti For Sole Proprietorship, Sec For Corporation Or Cda For Cooperative. 2.valid And Current Mayor's Permit Where The Principal Place Of Business Of The Bidder Is Located. 3.bir Registration Certificate With Taxpayer’s Identification Number. 4.statement Of The Bidder Of All Its Ongoing And Completed Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid, Within The Relevant Period Where Applicable. The Statement Shall Be Supported With A Copy Of The Contracts/purchase Or Job Orders; And End-users Acceptance Or Delivery Receipt Duly Acknowledged. The Bidder Must Have Completed Within A Period Of Five (5) Years From The Date Of Submission And Receipt Of Bids, A Single Contract That Is Similar To The Contract To Be Bid Whose Value Must Be At Least Fifty (50%) Percent Of The Abc. However, In The Case Of Expendable Supplies, Said Single Contract Must Be At Least Twenty Five (25%) Percent Of The Abc, Or; The Bidder Should Have Completed At Least Two (2) Similar Contracts And The Aggregate Contract Amounts Should Be Equivalent To At Least The Percentage Of The Abc As Required Above. 5.certificate Of Product Registration (cpr) From Food And Drug Administration (fda). (for Medicine Only)* 6.certificate Of Good Manufacturing Practice From Fda. (for Medicine Only)* 7.batch Release Certificate From Fda. (for Medicine Only)* 8.if The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/dealer Of The Product(s)/item(s). (for Medicine Only)* 9.license To Operate (fda). (for Medicine Or Medical Supplies/equipment)* 10.certificate Of Accreditation From Bureau Of Local Government Finance (blgf) (for Accountable Forms Only)* 11.audited Financial Statements, Showing, Among Others, The Bidder's Total And Current Assets And Liabilities, Stamped "received" By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission. 12.the Bidder's Updated Computation For Its Net Financial Contracting Capacity (nfcc) Bearing The Date Thereof Must At Least Be Equal To The Abc To Be Bid, Or A Commitment From A Universal Or Commercial Bank To Extend A Credit Line In Favor Of The Bidder If Awarded The Contract To Be Bid (cl) Must At Least Be Equal To Ten Percent (10%) Of The Abc To Be Bid.* 13.valid Joint Venture Agreement (jva), In Case Venture Is Already In Existence. 14.all Bids Must Be Accompanied By Bid Security In Any Or Combination Of The Acceptable Forms (below):* Form Of Bid Security Amount Of Bid Security A) Cash, Cashier's/manager's Check, Bank Draft/guarantee Confirmed By A Universal Or Commercial Bank. Two Percent (2%) B) Irrevocable Letter Of Credit Issued By A Universal Or Commercial Bank; Provided, However, That It Shall Be Confirmed Or Authenticated By A Commercial Or Universal Bank'; If Issued By A Foreign Bank. C) Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security. Five Percent (5%) D)bid Securing Declaration Prospective Bidder May Also Submit Bid Securities In The Form Of Cashier's/manager's Check, Bank Draft/guarantee, Or Irrevocable Letter Of Credit From Other Banks Certified By The Bsp As Authorized To Issue Financial Statement. Bids And Bid Securities Shall Be Valid For A Reasonable Period As Determined By The Head Of The Procuring Entity, But In No Case Shall Exceed 120 Calendar Days From The Date Of The Opening Of Bids. 15.production/delivery Schedule.* 16.manpower Requirements* 17.after-sales Service/parts (if Applicable) 18.sworn Statement By The Prospective Bidder Or Its Duly Authorized Representative As To The Following: A)it Is Not Blacklisted Or Barred From Bidding By The Gop Or Any Of Its Agencies; Office Corporations, Or Lgu's, Including Foreign Government/foreign Or International Financing Institutions Whose Blacklisting Rules Have Been Recognized By The Gppb; B)each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statement And Information Provided Therein Are True And Correct; C)it Is Authorizing The Head Of Procuring Entity Or The Duly Authorized Representative/s To Verify All Documents Submitted; D)authority Of The Signatory; E)affidavit Of Disclosure Of No Relationship; F)certification On Bidder's Responsibilities; G)it Comply With Existing Labor Laws And Standards, In The Case Of Procurement Of Services; H)it Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Activity, And I)in Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. 19.technical Specifications With Brochures, If Applicable.* 20.certificate Of Philgeps Registration* 21.tax Clearance* 22.latest Income And Business Tax Returns (quarterly/monthly); (optional/required Upon Post-qualification)** Note:*required Documents To Be Submitted By Pre-qualified Suppliers/bidders Per Bac Resolution No. 74-g Dated July 30, 2019. **optional Submission During The Opening Of Bids But Mandatory Requirement Upon Post-qualification Per Bac Resolution No. 58-d Dated August 4, 2020. B. Financial Documents: (2nd Envelope) (a) Bid Prices In The Bill Of Quantities Failure To Submit The Above Requirements On Time Or A Finding Against The Veracity Of Such Shall Be Ground For The Forfeiture Of The Bid Security And Disqualify The Bidder For Award. Performance Security And Warranty Shall Be Governed By The Provisions Of Secs. 39 And 62, Respectively, Of The Revised Irr-a Of R.a. 9184. Bid Documents Can Be Obtained Upon Payment Of Non-refundable Fee Equivalent To The Total Amount Of The Abc Of The Items In Which Interested Bidders Intend To Bid, In Accordance With The Guidelines On The Sale Of Bidding Documents, Appendix 25 Of The Revised Irr Of R.a. 9184: Approved Budget For The Contract (abc) Maximum Cost Of Bidding Documents (in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 More Than 10 Million Up To 50 Million 25,000.00 More Than 50 Million Up To 500 Million 50,000.00 More Than 500 Million 75,000.00 Bid Documents Can Be Obtained At The Bac Secretariat, Office Of The Bids And Awards Committee, This City, Tel. No. (035) 402-8047, Anytime During Office Hours; And Can Also Be Inquired For Further Information Or Particulars. All Other Particulars Relative To The Procurement Process Shall Be Governed By The Revised Implementing Rules And Regulations Of R.a. 9184 Otherwise Known As The Government Procurement Reform Act. Pre-bid Conference Will Be On June 11, 2024, 1:30 P.m. At The City Budget Office, 2nd Floor, City Hall Annex Building, This City. Eligibility Requirements Including Technical Documents And Financial Documents Shall Be Submitted Together Each In Separate Sealed Envelopes Duly Marked As Such On July 2, 2024 At The City Budget Office, 2nd Floor, City Hall Annex Building, This City, At 1:30 Pm At Which Date, Place, And Time Said Envelopes Shall Be Opened In The Presence Of The Members Of The Bac, The Attending Bidders, The Observers, Or Their Duly Authorized Representative. Late And Unsealed Bids Shall Not Be Accepted. The City Government Of Bais Reserves The Right To Accept Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids At Anytime Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. (sgd.) Atty. Romela Mae L. Napao City Administrator Chair, Bids And Awards Committee

Closing Date2 Jul 2024

Tender AmountPHP 12.7 Million (USD 217.1 K)

UNDP - UNDP Tender

Madagascar

Details: Acquisition of IT Equipment for the Landja Project & Madam/Sir, UNDP invites you to submit your price offer for the acquisition of IT equipment for the Landja Project, in accordance with Annex 1 of this Rfq. This Price Request Includes the Following Documents: Section 1: This Letter of Invitation Section 2: Rfq Instructions and Data Annex 1: Schedule of Requirements Annex 2: Offer Submission Form Annex 3: Technical and Financial Offer for This Request Procurement of Computer Hardware, Please Indicate If You Intend to Submit an Offer by Creating a Draft Response Without Submitting It Directly in the System. This Will Allow The System To Send Notifications In Case The Offer Requirements Are Changed. If you require further clarification, please contact us using the system messaging function. Bids Must Be Submitted Directly Into The System By Following This Link: http://supplier.quantum.partneragencies.org/ Using The Profile You Have On The Portal. If you have never registered before, you can register a profile using the registration link shared via the recruitment notice and following the instructions in the guides available on the UNDP website: https://www.undp.org/ procurement/business/resources-for-bidders or Directly Follow The Following Link: https://estm.fa.em2.oraclecloud.com/fscmui/faces/prcposregistersupplier?prcbuid=300000279875058 Do Not Create A New Profile If You Already Have One A. Use Forgotten Password Feature In Case You Don't Remember The Password Or Username From Previous Registration. You Could See Attached The Guideline For Your Support And Guide. The Procurement Specialist

Closing Date15 Jul 2024

Tender AmountRefer Documents