Cleaning Tenders

Details: Description Request For Quotation Date: November 18, 2024 Quotation No: 2024-11-135 To All Eligible Suppliers: The Schools Division Of Palawan, Through Its Bids And Awards Committee (bac), Intends To Procure A Procurement Of Hotel Accommodation (full Board) And The Use Of Amenities For The Conduct Of Division Capacity Building For Teachers And School Heads On Tracking Of Early Language Literacy And Umeracy Assessment (ellna) Results Cum Development Of Learning Activity Sheets For Grade 3 Learners With An Approved Budget For The Contract Five Hundred Nineteen Thousand Six Hundred Pesos (php 519,600.00) Through Section 53.9 (negotiated Procurement -small Value Procurement) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Lowest Price Inclusive Of Vat On The Item/s Listed Below, Subject To The Terms And Conditions Of The Rfq, And Submit Your Quotation Duly Signed By Your Representative Not Later Than 9:00 Am Of November 25, 2024, At 3rd Floor Bac Office, Deped Building, Sdo Palawan C/o Rafael G. Manalo, Phd, Bac Chairperson, Gov. Salvador P. Socrates Gov’t Center, Bancao-bancao, Puerto Princesa City. For More Information, Please Contact The Bac At (048) 433-6392. The Prospective Supplier Shall Be Responsible For Verifying The Quoted Items. (sgd) Rafael G. Manalo, Phd Assistant Schools Division Superintendent Chairperson, Bids And Awards Committee I. Magbabasang Palaweño – Elln Support Fund No. Items And Description Qty. Unit Statement Of Compliance (state “comply” Or “not Comply” Unit Price Total Price Procurement Of Hotel Accommodation (full Board) And The Use Of Amenities For The Conduct Of Division Capacity Building For Teachers And School Heads On Tracking Of Early Language Literacy And Umeracy Assessment (ellna) Results Cum Development Of Learning Activity Sheets For Grade 3 Learners District Crla/rma/phil-iri Coordinators, School Heads, Public Schools District Supervisor 80 Pax Education Program Supervisors, Division English Coordinator 11 Pax Free Of Charge Technical Working Work/secretariat, Eps (proponent) Cid 5 Pax Description Of Services: 1. One Spacious Function Hall That Can Accommodate A Group Of 96 Participants With Complete Audio-video Resources, Podium, National Flag, Strong Internet Connection With High Upload And Download Rate, And Extension Wires For Gadgets Charging. Round/working Table For 8-10 Pax Per Table. 2. Daily Serving Of Meals (breakfast, Lunch, And Dinner) And Snacks (am And Pm)- Daily Meals Must Have Two Main Dishes, Rice, Soup/appetizer, Side Dish/vegetables, Dessert, And Drinks. (see Attached Menu). 3. First Meal To Be Served Is Dinner Of December 15,2024, While The Last Meal Is Pm Snacks Of December 18,2024 4. Accommodation Can Cater To A Maximum Of Three (3) Persons Per Room With Separate Beds. 5. Free Accommodation (two Rooms), Meals And Snacks For Five (5) Pmt/secretariat, Program Proponent, Cid Chief For The Whole Duration Of The Activity 6. A Projector With A White Screen Will Be Inside The Function Room For The Whole Duration Of The Activity. 7. Free-flowing Coffee And Herbal Tea, As Well As Drinking Water For The Entire Duration Of The Activity. 8. Accessible And Clean Comfort Room. 9. A Standby Focal Person Who Will Monitor The Hotel Facilities And Services And The Functionality Of The Equipment. 10. Standby Generator Set In Case Of Power Interruption. 11. Function Rooms And Accommodation Rooms Must Be Within The Hotel Premises. 12. The Venue Must Be Within Puerto Princesa Proper 13. Free Tarpaulin With Layout For The Stage Backdrop And In Front Of The Venue With 8 X 10 Ft Size. 14. Set Of Tables And Chairs For Secretariat, Medical, And Pmt And 3 Tables For Printers Inside The Hall During The Duration Of The Workshop. Approved Budget For The Contract (abc) Php 519,600.00 Delivery Period: Three (3) Days Total This Is To Submit Our Price Quotations As Included Above, Subject To The Terms And Conditions Of The Rfq. Supplier’s Company Name: Tin: Address: Telephone: Cp No.: E-mail: Supplier’s Authorized Representative Signature Over Printed Name: Date: Ii. Terms And Conditions A. Submission Of Requirements 1. Sealed Quotations And Other Requirements Below Shall Be Submitted To The Bids And Awards Committee (bac) Secretariat At 3rd Floor, Deped Building, Schools Division Office Of Palawan, Gov. Salvador P. Socrates Gov’t Center, Bancao-bancao, Puerto Princesa City. 2. Interested Supplier Shall Submit The Following Requirements: A. Letter Of Intent To Participate In The Said Procurement. B. Duly Signed Request For Quotation. Prices Shall Be Quoted In Philippine Pesos. Statement Of Compliance Must Be Accomplished By The Supplier. C. Documentary Requirements Of The Following: 1. Dti Certificate Of Registration 2. Valid Mayor’s Permit 3. Tax Clearance 4. Bir Certification 5. Philgeps Registration 6. Notarized Omnibus Sworn Statement Bidder’s Failure To Submit Such Documents Upon Opening Shall Be Ground For Disqualification. B. Award The Supplier Who Submitted The Lowest Calculated And Responsive Quotation Shall Be Awarded The Purchase Order/contract After Evaluation By The Bac. C. Delivery Of Services 1. Delivery Of Services Shall Be Made On The Schedule Date Upon Receipt Of Purchase Order/contract. 2. Upon Delivery Of The Services, The Supplier Shall Notify The Purchaser And Present The Following Document/s To The Purchaser: A. Original And Copy Of The Supplier’s Statement Of Account. D. Evaluation Of Quotations Quotations Shall Be Compared And Evaluated Based On The Following Criteria: 1. Completeness Of Submission. 2. Compliance With Technical Specifications; And 3. Price E. Instructions 1. The Supplier Shall Be Responsible For All The Services To Be Rendered And Should Be In Accordance With The Schedule And Specifications Stipulated In The Contract/purchase Order. Failure Of The Supplier To Comply With This Provision Shall Be Grounds For Cancellation Of The Contract/purchase Order Issued To The Supplier. 2. Supplier Shall Pick Up The Purchase Order/contract Issued In Its Favor Within Three (3) Calendar Days From Receipt Of Notice To The Effect. A Telephone Call Or Fax Transmission Shall Constitute An Official Notice To The Supplier. Thereafter, If The Purchases Order Remains Unclaimed, The Purchase Order Shall Be Canceled. To Avoid Delay In The Delivery Of The Requesting Agency’s Requirements, All Defaulting Supplier Shall Be Precluded From Proposing Or Submitting Substitute Quotation (s) Or Item (s). 3. A Supplier Who Accepted A Purchase Order/contract But Failed To Deliver The Required Goods/services Within The Time Called For In The Purchase Order/contract Shall Be Disqualified From Participating In Deped Or Any Of Deped Unit’s Future Procurement Activities. This Is Without Prejudice To The Imposition Of Other Sanctions Prescribed Under R.a 9184 And Its Irr-a Against The Supplier. 4. The Supplier Shall Pay All Duties, Excise, And Other Taxes And Revenue Charges. 5. All Transactions Are Subject To Withholding Of Credible Value-added Tax And/or Expanded Value – Added Tax Per Revenue Regulation(s) Of The Bureau Of Internal Revenue. F. Payment One Hundred Percent (100%) Of The Contract Price Less Government Tax Shall Be Paid To The Supplier After Completion/compliance Of The Services Delivered. Payment Shall Be In The Form Of A Check And Addressed To The Supplier’s Name Firm. After Carefully Reading Your Request For Quotation And Its Terms And Conditions, I/we Quote You On The Item/s At The Price Noted In The Rfq. The Quotation Shall Be Binding Upon Us For Thirty (30) Calendar Days Reckoned From The Last Day Of Submission Indicated In The Submission Requirements. We Shall Accept The Corresponding Award On Purchase Order At Any Time Before The Expiration Of This Period

Details: Description Republic Of The Philippines Department Of Health Western Visayas Center For Health Development Invitation To Bid For Early Procurement Of Medical Supplies And Logistics, Ib No. Sb-2025-002 1. The Department Of Health – Wv Chd, Through The Dpc 2025 Fund Intend To Apply The Sum Of Six Million One Hundred Ninety-one Thousand Six Hundred Forty-five Pesos (php 6,191,645.00) Being The Abc To Payments Under The Contract For Early Procurement Of Medical Supplies And Logistics, Ib No. Sb-2025-002. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Department Of Health – Wv Chd, Through The Dpc 2025 Fund Intend To Apply The Sum Of: Ite M No. Item Description 1 Surgical Mask Abc Per Item (php) 55,000.00 2 Surgical Cap 88,000.00 3 Clean Gloves (nitrile) 99,000.00 4 Sterile Gloves (latex) 27,500.00 5 Surgical Gown 52,250.00 6 Coverall (hazmat) 94,500.00 7 Goggles 24,445.00 8 Shoe Cover 11,950.00 9 N95 Mask 10 Disposable Speculum 49,000.00 450,000.00 11 Sputum Cups 12 Disinfectant (smoke Generator In Cannister) 575,000.00 1,500,000.00 13 Naat Cartridges For Tb 14 Drugs Testing Kits 2,925,000.00 200,000.00 15 Mid Upper Arm Circumference Tape 40,000.00 Total Abc Php 6,191,645.00 Being The Abc To Payments Under The Contract For Each Item. Bids Received In Excess Of The Abc For Each Item Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Health – Wv Chd Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required 30 Calendar Days Upon Receipt Of Ntp At Doh Wv Chd. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 8 3. 4. 5. 6. 7. 8. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From Department Of Health – Wv Chd And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays, 8:00am To 5:00pm. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 20, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots. The Procuring Entity May Accept The Payment Of Bidding Documents In Postal Money Order, Cashier’s Check Or Manager’s Check Upon Submission Of The Bids, Provided It Must Be Sealed And Labeled Separately From The Eligibility/ Technical Documents And Financial Documents. Payment In Check Should Be Made Payable To Doh Chd-wv. Note: For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots/items. The Department Of Health – Wv Chd Will Hold A Pre-bid Conference1 On November 27, 2024, 9:00am At Doh – Wv Chd, Brgy. Bolong Oeste, Sta. Barbara, Iloilo, Through Videoconferencing/webcasting And Face To Face, Subject To The Registration Requirement Stated Hereunder In Item 11, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before December 10, 2024, 9:00am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 1may Be Deleted In Case The Abc Is Less Than One Million Pesos (php1,000,000) Where The Procuring Entity May Not Hold A Pre-bid Conference. 9 9. Bid Opening Shall Be Conducted Through Videoconferencing/webcasting And Face To Face On December 10, 2024, 9:00am At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. 11. 12. 13. The Department Of Health – Wv Chd Serves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Bidders Who Choose To Attend The Pre-bid Conference And Bidding Conference Are Required To Pre-register Using The Link Below: Pre-registration Link Deadline Of Pre Registration For Video Conferencing/ Webcasting Https://docs.google.com/forms/d/1cs5jjl6r9x Fot5ubfebnhjg_vzzv667m7ngldbfa5ac/ Edit Pre- Bid – On Or Before November 26, 2024, 12:00 Pm Face To Face Https://docs.google.com/forms/d/1jcpxenx6 Haqeogxus03yanxoekihom Jdomk_fmjy7a/edit Bidding – On Or Before December 9, 2024, 12:00 Pm Note: Link Of The Virtual Conference Will Be E-mailed To Those Who Pre-registered Only. For Further Information, Please Refer To: Doh-wv Chd Bac Secretariat Office Brgy. Bolong Oeste, Sta. Barbara, Iloilo, 5002 E-mail: Specialbacdoh6@yahoo.com (033)332-2329 Local 145 Mobile Nos. +639670668522/ +639622858077 Url: Http://www.ro6.doh.gov.ph You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://drive.google.com/drive/u/0/folders/1e2stpswvgzgzhzgrpemufmmuluwqz Znh November 20, 2024 (sgd) Ma. Sophia S. Pulmones, Md, Mpm Bac Chairperson (category – B)

Details: Description Republic Of The Philippines Department Of Public Works And Highways Cagayan 2nd District Engineering Office Abulug, Cagayan, Region Ii Procuring Entity: Dpwh-cagayan 2nd Deo P.r. No.: 2024-09-334 Standard Form/title: Small Value Procurement (request For Quotation) P.r. Date: 10/11/2024 Revised On: Office/end User: All Section Company Name: Address: Tel No./ Fax No: T.i.n: Please Quote Your Lowest Price On The Item(s) Listed, Subject To The Terms And Conditions Stated Below And Submit Your Quotation Duly Signed By Your Representative Not Later Than 10:00 Am Of November 25, 2024 To Procurement Unit, Dpwh-cagayan 2nd District Engineering Office, Libertad, Abulug, Cagayan And Will Opened On The Same Day At 10:30 Am Terms And Conditions: 1 All Entries Must Be Type Written Or Legibly Written. 2 Delivery Period Within 30 Working Days Upon Receipt Of The Approved Funded Purchase/work Order. Administrative Penalties Pursuant To Sec. 69 Of The Revised Irr-ra9184 Shall Be Imposed For Non-delivery Without Valid Reason. 3 Warranty Shall Be For A Minimum Of Three (3) Months For Supplies And Jesselito D. Bassig Materials; One (1) Year For Equipment From Date Or Acceptance By The End Engineer Iii User. Bac - Chairperson 4 Price Validity Shall Be For A Period Of 30 Calendar Days. 5 Philgeps Registration Certificate / Mayor's Permit / Omnibus Sworn Statement /income Tax Return Shall Be Attached Upon Submission Of The Quotation. 6 Please Indicate The Brand For Each Items Being Offered 7 The Approved Budget Ceiling For This Procurement Is Php 394,150.00 8 Service Vehicles (nissan Bravado M:2011, Isuzu Fuego M:2002, Et. Al) Item No Item & Description Qty Unit Unit Price Total Price I 225/70 Rim 15 Tubeless Tire (nissan Bravado M:2011) -2- Pcs Ii 225/70 Rim 15 Tubeless Tire (isuzu Fuego M:2002) -2- Pcs Iii 235/75 Rim 15 (isuzu D-max M:2012) -2- Pcs Iv 245/70 Rim 16 Tubeless Tire (mitshubishi Strada M:2012, And Mitsubishi Strada M:2014) -4- Pcs V 265/60 Rim 18 Tubeless Tire (ford Ranger M:2015) -2- Pcs Vi 265/65 Rim 17 Tubeless Tire (toyota Hi-lux M:2013) -2- Pcs Vii 265/70 Rim 17 Tubeless Tire (toyota Hi-lux M:2014) -2- Pcs Viii Ball Joint (lower) (mitsubishi L200 M:1999) -2- Pcs Ix Ball Joint (upper) (mitsubishi L200 M:1999) -2- Pcs X Battery (special Type) Din 77 (ford Raniger M:2015) -1- Pc Xi Battery 3sm (nissan Bravado M:2011, Nissan Navara M:2016, And Toyota Hi-lux M:2014) -3- Pc Xii Brake Cleaner (toyota Hi-lux M:2013) -1- Pc Xiii Brake Pad (mitsubishi L200 M:1999) -1- Set Xiv Brake Pad Front (mitsubishi Strada M:2014, Nissan Navara M:2012, And Toyota Hi-lux M:2013) -3- Set Xv Brake Shoe Rear (mitsubishi Strada M:2014, Nissan Navara M:2012, And Toyota Hi-lux M:2013) -3- Set Xvi Clutch Disc/lining (isuzu D-max M:2012) -1- Set Xvii Clutch Lining (mitshubishi Strada M:2012 And Toyota Hi-lux M:2014) -2- Pc Xviii Coolant (mitshubishi Strada M:2012) -7- Ltrs Xix Engine Oil (fully Synthetic) (nissan Bravado M:2011, Ford Ranger M:2015, Isuzu D-max M:2012, Mitsubishi L200 M:1999, Mitsubishi Strada M:2014, And Toyota Hi-lux M:2013) -50- Ltrs Xx Engine Oil (fully Synthetic) (toyota Hi-lux M:2016) -8- Ltrs Xxi Fuel Filter (isuzu D-max M:2012 And Mitsubishi Strada M:2014) -2- Pc Xxii Fuel Filter Bf 1208 (generator Cummins M:2019) -1- Pc Xxiii Fuel Filter Bf 988 (generator Cummins M:2019) -1- Pc Xxiv Fuel Filter F193 (mitshubishi Strada M:2012) -1- Pc Xxv Fuel Filter F-196 (toyota Hi-lux M:2014) -1- Pc Xxvi Fuel Filter Primary Fc 234 (nissan Navara M:2012) -1- Pc Xxvii Fuel Filter Secondary Fc 235 (nissan Navara M:2012) -1- Pc Xxviii Headlight Assy. (mitsubishi L200 M:1999) -1- Ltrs Xxix Leaf Spring Bushing (mitsubishi L200 M:1999) -8- Pcs Xxx Oil Filter (isuzu D-max M:2012, Mitsubishi Strada M:2014, Mitsubishi Strada M:2014, And Toyota Hi-lux M:2016) -4- Pc Xxxi Oil Filter Bd 7309 (generator Cummins M:2019) -1- Pc Xxxii Oil Filter C 111 (toyota Hi-lux M:2013 And Toyota Hi-lux M:2014) -2- Pc Xxxiii Oil Filter C 206 (nissan Navara M:2012) -1- Pc Xxxiv Oil Filter C 209 (nissan Bravado M:2011) -1- Pc Xxxv Oil Filter C 306 (mitsubishi L200 M:1999) -1- Pc Xxxvi Oil Filter O-407 (ford Ranger M:2015) -1- Pc Xxxvii Pressure Plate/clutch Cover (isuzu D-max M:2012) -1- Pc Xxxviii Release Bearing (isuzu D-max M:2012) -1- Pc Xxxix Rotor Disc (mitsubishi Strada M:2014 And Toyota Hi-lux M:2013) -4- Pcs Xl Shock Absorber (mitsubishi L200 M:1999) -1- Set Xli Swing Arm Bushing (upper)(mitsubishi L200 M:1999) -4- Pcs Xlii Swing Arm Damper (mitsubishi L200 M:1999) -2- Pcs Xliii Tail Lamp Assy. (mitsubishi L200 M:1999) -1- Set Xliv Tail Light Assy. (l/r) (nissan Bravado M:2011) -2- Pair Xlv Wiper Blade (ford Ranger M:2015, Isuzu D-max M:2012, Mitshubishi Strada M:2012, And Toyota Hi-lux M:2013) -8- Pcs Xlvi Wiper Blade (mitsubishi L200 M:1999) -2- Pcs Xxx Total Brand And Model: Warranty: Delivery Period: Price Validity: After Having Carefully Read And Accepted Your General Conditions, I/we Quote On The Item(s) At Prices Note Above. If The Space For Delivery Period, Warranty And Price Validity Are Left Blank, It Means That I Concur With The Terms And Conditions Specified By Dpwh. Printed Name / Signature / Date Tel. No. Cp. No. & Email Address

Details: Building Technologies Research And Integration Center technology Collaborations For Us Building Technologies Industries oak Ridge National Laboratory (ornl) Is Seeking Industry Partners To Participate In Short-term, Collaborative Projects Within The Building Technologies Research And Integration Center (btric) To Accelerate Development Of New Energy Efficient Building Technologies. This Opportunity Will Provide Selected Participants Access To Ornl's Experienced Staff And Unique Equipment And Capabilities To Demonstrate Advanced Concepts With Intent To Develop And Deploy Innovative And Energy Efficient Building Technologies. description ut-battelle, Llc, Acting Under Its Prime Contract No. De-ac05-00or22725 With The U.s. Department Of Energy (doe) For The Management And Operation Of The Oak Ridge National Laboratory, Conducts Research And Development In Support Of The Doe Building Technologies Office (bto). The Doe Building Technologies Office Partners With Industry, Small Business, Universities, And Other Stakeholders To Identify And Invest In Innovative Technologies With The Potential To Improve The Energy Productivity Of Buildings Without Sacrificing Occupant Comfort Or Product Performance, As Well To Enhance The Global Competitiveness Of The United States. ornl Is Requesting Cost-shared Proposals From Industry To Assess Applicability Of Technologies That Can Reduce The Energy Intensity Of U.s. Buildings By 35% By 2035, And 50% By 2050 Relative To 2005. The Mission Of The Building Technologies Office Is To Develop And Accelerate The Adoption Of Cost-effective Technologies, Techniques, Tools, And Services That Enable High-performing, Energy-efficient, And Demand-flexible Residential And Commercial Buildings In Both New And Existing Building Markets. as Part Of The Technology Collaborations Conducted Under This Announcement, The Proposer Will Describe The Potential Energy Savings And Novel Non-energy Impacts That May Be Realized By The Targeted Project. technology Areas Of Interest hvac, Water Heating, And Appliances windows And Building Envelope solid-state Lighting building Energy Modeling sensors And Controls advanced Building Construction thermal Energy Storage grid-interactive Efficient Buildings (geb) residential Building Integration commercial Building Integration projects Will Be Conducted During A Short-time Period. At Least 20% Cost Share, Which Can Be Funds-in To Ornl Or In-kind Contributions (e.g., Facilities, Services, And Staff Time), Is Required On The Part Of The Industrial Participant. Participant Cost-share Cannot Be Met Using Funds From U.s. Government Sources. Funds Will Not Be Provided To The Industrial Participant By Ornl. The Intent Is To Increase The In-kind Cost Share From 20% To 50% In The Future, That Timing To Be Determined And Approved By Bto. note: This Is Not A Procurement Request. eligibility eligibility Is Limited To Industries That Currently Manufacture In The U.s. For Commercial Applications In The Residential Or Commercial Building Technologies Market, Or To Industries That Will Be Able To Do So As A Direct Result Of These Collaborative Efforts. There Is No Restriction Based On The Particular Building Technology Area, But Should Align With Facilities, Expertise, And Capabilities Of Btric. background doe's Building Technologies Research And Integration Center (btric) At Ornl Offers Distinctive World-leading Capabilities In Building Technologies, Characterization Facilities As Well As Leveraging Advanced Manufacturing Capabilities At Ornl’s Manufacturing Demonstration Facility (mdf). The Btric Provides A Collaborative, Shared Infrastructure To Help Industry Adopt Innovative, Energy Efficient Technologies That Improve The Energy Productivity Of Buildings Without Sacrificing Occupant Comfort Or Product Performance. Ornl’s Expertise In Building Technologies, Materials, And Advanced Manufacturing Will Assist The Building Industries In Accelerating The Developing Of Existing And New Innovative Technologies. More Information About The Ornl Btric Can Be Found At: Https://www.ornl.gov/facility/btric from Concept To Commercialization, Ornl's World-leading Facilities And Expertise Enable Research Focused On Reducing The Energy Intensity Of U.s. Industry, Supporting Development Of New Products, And Strengthening Our Nation's Clean Energy Economy To Meet The Commercial And National Security Needs Of Tomorrow. objective the Objective Of These Btric Technical Collaborations Is To Collaborate With Industry To Investigate, Improve, Develop, And Deploy Innovative Energy Efficient Building Technologies. In So Doing, Creating And Preserving Domestic Jobs Is A Goal Of This Solicitation. the Primary Focus Of This Announcement Is To Target Projects That Will Impact The Following Technical Areas: hvac, Water Heating, And Appliances windows And Building Envelope solid-state Lighting building Energy Modeling sensors And Controls advanced Building Construction thermal Energy Storage grid-interactive Efficient Buildings (geb) residential Building Integration commercial Building Integration laboratory Support it Is Anticipated That Industrial Partners Will Work Collaboratively With Members Of The Btric Staff To Conduct Project Activities Across The Various Areas Of Expertise Within The Btric. intellectual Property And Proprietary Data projects Will Be Performed With A Cooperative Research And Development Agreement (crada) Or User Agreement As The Contract Instrument. See The Announcement Package For A Sample Crada Agreement. Doe And Ornl Respect The Importance Of Industry's Intellectual Property And Data Security While Balancing The Need To Document The Benefits Of Public Expenditures. Provisions Relating To Proprietary Information And Intellectual Property Are Set Forth In The Crada. A Non-disclosure Agreement (nda), If Required, Can Be Put Into Place During Development Of The Project To Facilitate Discussions While Protecting The Partner's Proprietary Information. it Is Preferred That Proprietary Information Not Be Included In The Proposal. If Company Proprietary Information Is Included In The Proposal, The Specific Information Should Be Marked As Such, And Ut- Battelle/ornl Will Treat That Information As Business Confidential. proposal Guidelines proposals Should Be Completed Using The Attached Template In The Announcement Package. proposers Are Encouraged To Consult With Ornl Technical Staff To Develop A Work Scope That Is Technically Feasible And Compatible With Ornl Facilities And Capabilities. proposal Deadline And Submission this Announcement Will Remain Open Subject To Availability Of Funding From The Doe Building Technologies Office. completed Proposals Must Be Submitted In Pdf File Format By Email To Btriccollaboration@ornl.gov. The Subject Line Should Include: Ornl Btric Technology Collaborations. Receipt Of Proposals Will Be Confirmed Within One Week Of Submission. proposal Evaluation And Timeline this Is An Open Announcement. Selection Of Winning Proposals Will Be At The Discretion Of The Doe Bto. Proposal Evaluation Criteria Will Include Compatibility With Ornl Facilities And Capabilities, Technical Feasibility And Merit, The Potential To Commercialize New Products And Create Us Jobs, And The Potential For Buildings Energy Savings. Bto And The Btric Reserve The Right To Select All, A Portion, Or None Of The Submissions. point Of Contact all Questions Relating To This Announcement Should Be Directed To Melissa Lapsa By Email, Lapsamv@ornl.gov, Or By Phone, (865) 576-8620. cooperative Research And Development Agreement (crada) Information awardees Are Required To Enter Into A Short-form Crada Or User Agreement With Ut-battelle. Because Of The Need For Accelerated Placement And Execution Of The Projects, The Most Favorable Terms Allowable Within Doe Guidelines Have Been Established And Will Not Be Subject To Negotiation. Failure To Enter Into A Crada In A Timely Manner Will Result In Termination Of Further Project Consideration. Cradas Have Provisions That Address The Protection Of The Partners' Existing Proprietary Information And Intellectual Property, As Well As The Information And Intellectual Property Generated And Made During The Collaboration. More Specifically, Each Party Owns Its Own Inventions While Jointly Developed Inventions Will Be Jointly Owned. In All Cases, U.s. Government Will Retain Government Use Rights. Crada Durations Are Expected To Be At Least One Year. for More Specific Terms And Conditions, Please Review The Model Short-form Crada And User Agreement Template Attached To This Announcement.

Details: Description Invitation To Bid The Iligan City Government Bids And Awards Committee (bac), Through Special Educational Fund Intend To Apply The Sum Of P 4,830,913.32 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Three-storey Guidance And Counselling Building, Iligan City National High School (icnhs), Brgy. Mahayahay, Iligan City With Project No. Cb(b)-24-130 (ceo-infra). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Three-storey Guidance And Counselling Building, Iligan City National High School (icnhs), Brgy. Mahayahay, Iligan City •general Requirements -pennits & Clearances; -installation Of Project Billboard,2 Sets; -occupational Safety & Health Program; •clearing & Grubbing -cutting Of Trees; •earthworks -excavation For Foundation, Tie Beam, Wall-footing , Zocalo, Septic Vault, Concrete Storage, Stairs Foundation & Grease Trap; -backfilling & Compaction For The Slab On Grade; -gravel Bedding For Foundation , Tie Beam, Wall-footing , Slab On Grade, Zocalo, Septic Vault , Concrete Storage, Stairs Foundation & Catch Basin; •concrete Works, Forms & Scaffoldings -concrete Pouring For Foundation , Columns, Tie Beam, 2nd & 3rd Floor Beams, Suspended Slab, Roof Beams , Cantilever Beams, Slab On Grade, Wall-footing (foundation) , Zocalo (foundation) , Septic Vault Flooring (top & Bottom), Concrete Storage (foundation), & Catch Basin Flooring; •masonry Works -installation Of 4" X 8" X 16" Concrete Hollow Blocks (chb) For Wallings At Ground Floor, Balcony (2nd Floor) , Parapet,wall-footing ,septic Vault, Catch Basin, Concrete Storage & Zocalo, W/plaster Finish,& Smooth On Expose Areas; -using 10mmø X 6m Deformed Steel Bars Wf#.16 G.i Tie Wire; And Vertical Spaced @600mm O.c & For Horizontal, Every @3rd Layer; •steel Reinforcement -using 10mmø, 12mmø, 16mmø & 20mmø Deformed Steel Bars Wf#.16 G.i Tie Wire; •paint Works & Finishes; -skim Coating Only For All Wallings At Ground Floor Only; •steel Works -fabrication & Installation Of 50mm X 50mm X 6mm Thk., 38mm X 38mm X 6mm Thk., 38mm X 38mm X 4.smm Thk ., 25mm X 25mm X 4.smm Thk., 25mm X 25mm X 2mm Thk. Angle Bar,25mm X 25mm X 3/16" Thk. Angle Bar, 25mm X 3/16" Thk. Flat Bar. 2" X 4" X 1.smm Thk. C-purtins W/ 10mmø Dsb Sagrods, 12mmø Turnbuckle & Cross Brace; 10mmø Anchor Bolt,epoxy Primer; -installation Of Stainless Steel Square Tube Railings- Grade 304 For Stairs & Balcony; •tinsmithry Works -installation Of 0.4mm Thk. Colored Roof Long-span Rib Type,0.4mm Thk. Pre-fab End Flashing, 0.4mm Thk. Pre-fab Fascia Cover,& 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type W/complete Accessories ; •electrical Works ; -electrical Works At Ground Floor, & Provisions; •plumbing Works; -installation Of Plumbing Fixtures At Ground Floor Only; -installation Of 3"ø Pvc Pipe For Downspout W/ G.i Basket Strainer, Pvc Pipe Clip W/complete Accessories ; -provision Of Pvc & G.i Pipes For 2nd Floor & 3rd Floor Fixtures; I. Permits And Clearance (q = 1.00 Lumpsum) Includes Fire, Brgy. Clearance For Construction Fee, Professional Fee, White Print (a-3)-6 Sets Of Plans. Ii. Construction Safety And Health Program (q = 1.00 Lot) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe, First Aide Kit & Medicines. Iii. Project Billboard (q = 2.00 Set/s) Includes 4' X 8' Tarpaulin Print Billboard, 8' X 8' Tarpaulin Print Billboard, 2"x 2"x 8' Coco Lumber, 2"x 2"x 10' Coco Lumber, 2"x 2"x 14' Coco Lumber, Assorted Sizes C.w Nails. Iv.mobilization & Demobilization (q = 1.00 Lot) V.clearing And Grubbing (q = 1.00 Lot) Vi. Earthworks (q = 147.48 Cu.m) Includes Volume To Be Excavated, Volume To Be Backfilled, Pit Run Soil/earthfill (backfilling Suitable Materials), Gravel Bedding (1-1/2"ø). Vii. Concrete Works, Formworks And Scaffoldings (q = 75.99 Cu.m) Includes Portland Cement, Washed Sand, Washed Gravel, 4' X 8' X 1/4" Thk. Marine Plywood, Assorted Sized Coco Lumber, Assorted Sized C.w Nails. Viii. Masonry Works (q = 284.81 Sq.m) Includes 4" X 8" X 16" Chb, Portland Cement, Washed Sand, 10mm Dia. X 6m Dsb, #16 G.i Tie Wire. Ix.steel Reinforcements (q = 16,429.80 Kgs.) Includes 10mm Dia. X 6m Dsb, 12mm Dia. X 6m Dsb, 16mm Dia. X 6m Dsb, 20mm Dia. X 6m Dsb, #16 G.i Tie Wire. X.steel Works (q = 2,034.40 Kg/s) Includes 50mm X 50mm X 6m X 6mm Thk. Angle Bar- 16pcs, 38mm X 38mm X 6m X 4.smm Thk. Angle Bar- 20pcs, 38mm X 38mm X 6m X 6mm Thk. Angle Bar- 23pcs, 25mm X 25mm X 6m X 4.5mm Thk. Angle Bar- 24pcs, 25mm X 25mm X 6m X 2.0mm Thk. Angle Bar- 7pcs, 1" X 1" X 6m X 3/16" Thk. Angle Bar- 4pcs, 25mm X 6m X 3/16" Thk. Flat Bar- 3pcs, 50mm X 100mm X 6m X 1.5mm Thk. C-purlins- 20pcs, 12mmø X 6mm Plain Bar Cross Brace- 8pcs, 12mmø Turnbuckle, Sagrods-10mmø X 6mm Dsb- 18pcs, 10mmø Anchor Bolt (l-type), Welding Rod (6011), 2" X 3" X 6m X 1.0mm Thk. Stainless Steel Rectangular Tube- Grade 304, 2" X 2" X 6m X 1.0mm Thk. Stainless Steel Rectangular Tube- Grade 304, Stainless Welding Rod (1.60mm), Epoxy Primer, 4" Paint Brush, 4"ø Cutting Disc, 4"ø Grinding Disc, Assorted Sand Paper. Xi.tinsmithry (q = 80.73 Sq.m) Includes 0.4mm Thk. Colored Roof Long Span Rib Type, Pre-fab Colored End Flashing (0.4mm Thk. X 8'), 0.30m X 2.40m X 0.4mm Thk. Pre-fab Colored Gutter Spanish Type, Pre-fab Colored Fascia Cover (0.4mm Thk. X 8'), Sealant, Teksrew, Blind Rivets (1000pcs/box), Riveter, Aviation Metal Snip Scissor. Xii. Paint Works & Finishes (q = 388.99 Sq.m) Includes Skim Coat, Sand Paper. Xiii. Electrical Works (q = 1.00 Lot) Includes 2.0mm2 Thhn Stranded Copper Wire, 3.5mm2 Thhn Stranded Copper Wire, 8.0mm2 Thhn Stranded Copper Wire, 14.0mm2 Thhn Stranded Copper Wire, 38.0mm2 Thhn Stranded Copper Wire, Pvc Conduit 15mm, Pvc Elbow 15mm, Junction Box 4x4", Utility Box 2x4", Pvc Conduit 20mm, Pvc Elbow 20mm, Emt Conduit 32mm, Emt Coupling 32mm, Service Entrance Cap 32mm, Secondary Rack With 2 Spool, Duplex Convenience Outlet, Airconditioning Outlet, Single Gang Switch With Led Indicator 230v, Two Gang Switch With Led Indicator 230v, Three Gang Switch With Led Indicator 230v, Single Gang Three Way Switch With Led Indicator 230v, Led Panel Light Recessed Round Type 18w (230v), Led Panel Light 30x60 24w (230v Daylight), Led Panel Light 30x30 18w (230v), Circuit Breaker 2 Pole 15at (230v Plug In Type), Circuit Breaker 2 Pole 20at (230v Plug In Type), Circuit Breaker 2 Pole 60at (230v Plug In Type), Electrical Panelboard 10 Holes 8 Branches Plug In Type, Mccb 125 At 2 Pole 230v, Enclosure For 125 At Mccb, Solvent Cement 100cc, Minor Electrical Peripherals. Xiv. Plumbing Works (q = 1.00 Lot) Includes 6" Dia. X 10' Pvc Pipe S-1000, 4" Dia. X 10' Pvc Pipe S-1000, 4" Dia. Pvc Sanitary Tee (s-1000), 4" Dia. Pvc Elbow 1/4 Bend (90 Deg.), 4" Dia. Pvc Elbow 1/8 Bend (45 Deg.), 4" Dia. Pvc Coupling, 4" Dia. Pvc Clean Out W/adapter & Plug, 4" X 2" Dia. Pvc Coupling Reducer, 4" Dia. Pvc Cross Tee, 3" Dia. X 10' Pvc Pipe S-1000, 3" Dia. Pvc Elbow 1/4 Bend (90 Deg.), 3" X 2" Dia. Pvc Coupling Reducer, 3" X 2" Dia. Pvc Wye, 3" Dia. Pvc Elbow 1/8 Bend (45 Deg .), 3" Dia. Pvc Clean Out W/adapter & Plug, 3" Dia. Pvc Sanitary Tee (s-1000), Pvc Pipe Strap/clip, Bolt (54pcs), Nut (54pcs) And Washer (54pcs), 2" Dia. X 10' Pvc Pipe S-1000, 2" Dia. Pvc Tee, 2" Dia. Pvc P-trap, 2" Dia. Stainless P Trap, 2" Dia. Pvc Elbow 1/4 Bend (90 Deg.), Pvc Cement (400cc), 1/2" Dia. X 20' G.i Threaded Pipe Water Supply Line, 1/2" Diam. G.i Threaded Pipe Elbow (90deg.), 1/2" Diam. G.i Threaded Pipe Tee, 1/2" Diam. G.i Threaded Union Patente, G.i Basket Strainer, 4" X 4" Stainless Floor Drain, Water Closet W/complete Fittings/accessories-heavy Duty, Lavatory -heavy Duty, Faucet W/complete Accessories-heavy Duty, Teflon Tape (3/4" X 10m). Approved Budget For The Contract (abc): P 4,830,913.32 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Eighty (180) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.issuance Of Bid Documents: November 5 – November 26, 2024 – 8:00 A.m. At Room 205, Left Wing, 2nd Floor, Sp Bldg., Buhanginan Hills, Palao, Iligan City. 2.pre-bid Conference: November 12, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 3.submission Of Bids: November 26, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.opening Of Bids: November 26, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: November 5, 2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. 24-130 (ceo-infra)

Details: Description Medical Oxygen Tank (w/ Content) Size: Height 79 Cm X Diameter 13 Cm Capacity 10 Liters Cordless Sabre Saw Type: Cordless Sabre Saw (reciprocating Saw) Voltage: 18v Battery Type: Lithium-ion Stroke Length: 28 Mm Cutting Speed: Up To 0-3000 Strokes Per Minute (spm) Cutting Capacity: Wood: Up To 200 Mm Metal: Up To 10 Mm Weight: Approximately 3 Kg (may Vary By Model) Blade Type: Compatible With Standard Sabre Saw Blades Tool-less Blade Change: Yes Variable Speed Control: Yes Led Work Light: Yes Vibration Control: Yes 18v Battery Voltage: 18v Battery Type: Lithium-ion Capacity: Available In Various Amp-hour (ah) Ratings, Commonly: 2.0 Ah 4.0 Ah 5.0 Ah 8.0 Ah Dimensions: Varies By Capacity, Generally Compact And Lightweight Weight: Varies Based On Capacity: 2.0 Ah: Approximately 0.6 Kg 4.0 Ah: Approximately 1.1 Kg 5.0 Ah: Approximately 1.2 Kg 8.0 Ah: Approximately 1.5 Kg Tripod Stand Height Adjustment: Minimum Height: Approximately 65 Cm (25.6 Inches) Maximum Height: Approximately 160 Cm (63 Inches) Adjustment Mechanism: Quick-release Clamps For Easy Height Adjustment. Material: Construction: Sturdy Aluminum For Lightweight Durability. Weight: Approximately 2.4 Kg (5.3 Lbs.), Making It Portable Yet Stable. Base: Legs: Three Adjustable Legs For Stability On Uneven Surfaces. Foot Design: Equipped With Rubber Feet For Traction, With Some Models Having Spikes For Soft Ground. Compatibility: Compatible With Various Bosch Laser Levels And Other Surveying Instruments Featuring A Standard 1/4-inch Or 5/8-inch Mounting Thread. Foldable Design: Easily Folds For Convenient Storage And Transport. Load Capacity: Supports Tools Weighing Up To 5 Kg (11 Lbs.), Suitable For Various Laser Levels And Equipment. Storage And Carrying: Typically Comes With A Carrying Case For Easy Transportation. Sabre Saw Power Supply: Battery Voltage: 12v Motor: Power Output: Approximately 500 W (equivalent To Performance Level) No-load Stroke Rate: Up To 0 2,200 Strokes Per Minute (spm) Stroke Length: Stroke Length: Approximately 20 Mm Cutting Capacity: Wood: Up To 120 Mm Metal: Up To 10 Mm Blade Type: Compatible With Standard Sabre Saw Blades For Various Materials. Weight: Approximately 1.5 Kg (without Battery), Making It Lightweight And Easy To Handle. Design Features: Ergonomic Handle: Designed For Comfort And Reduced Fatigue During Extended Use. Tool-less Blade Change: Quick And Easy Blade Changes Without Additional Tools. Led Light: Integrated Led Work Light For Improved Visibility In Dark Or Confined Spaces. Vibration Control: Features To Reduce Vibration For Enhanced User Comfort. Battery And Charging: Compatible With Bosch 12v Lithium-ion Batteries. Battery And Charger Typically Sold Separately. Cordless Blower Battery Voltage: 18v Motor Type: Brushless Motor Air Speed: Up To 200 Km/h (approximately 124 Mph) Air Volume: Up To 200 M³/h (approximately 118.9 Cfm) Weight: Approximately 3.5 Kg (7.7 Lbs) Without Battery Noise Level: Approximately 90 Db(a) Vibration Level: Typically Low, Around 2.5 M/s² Battery Compatibility: Compatible With Bosch 18v Lithium-ion Batteries Charging Time: Depending On The Battery Charger Used, Typically Around 1 Hour For Standard Batteries. Sds & Shank Flak 14x250mm Shank Size: 14 Mm Diameter Length: 250 Mm (may Include Total Length Of The Shank And Working Part) Material: Typically, High-speed Steel (hss) Or Carbide-tipped For Durability Application: Suitable For Drilling Into Concrete, Brick, And Masonry Flute Design: Spiral Flute Design For Efficient Debris Removal Working End: May Have A Chiseling Or Cutting Tip Designed For Heavy-duty Applications Drill Bit Metal (1.5) Cobalt & Metal (2.5) Cobalt & Metal (6.5) Cobalt & Metal (8.0) Cobalt & Metal (3.0) Cobalt & Metal (10) Cobalt & Metal Material: Cobalt High-speed Steel (hss) For Enhanced Durability And Heat Resistance. Tip Angle: 135° Split Point For Faster Penetration And Reduced Walking. Sizes: Available In Various Sizes, Often Ranging From 1 Mm To 13 Mm In Diameter. Coating: Typically, Uncoated Or May Have A Titanium Or Nitride Coating For Additional Wear Resistance. Usage: Ideal For Drilling In Stainless Steel, Alloy Steel, And Other Hard Metals. Flute Design: Spiral Flute Design For Efficient Chip Removal And Improved Cutting Performance. Shank Type: Usually Available In Both Standard And Reduced Shank Sizes For Compatibility With Various Drills. Drill Bit Metal (7.0) (4.0) Material: Cobalt High-speed Steel (hss) With 5% To 8% Cobalt Content For Increased Strength And Heat Resistance. Tip Design: Point Angle: 135° Split Point Design For Improved Penetration And Reduced Walking On Metal Surfaces. Tip Type: Available In Standard, Taper, Or Other Configurations Depending On The Specific Drill Bit Model. Sizes: Available In A Wide Range Of Diameters, Commonly From 1 Mm To 13 Mm Or Larger, Catering To Various Drilling Needs. Coating: Typically, Uncoated Or With A Titanium Or Nitride Coating To Enhance Wear Resistance And Reduce Friction. Usage: Ideal For Drilling In Tough Metals Such As Stainless Steel, Tool Steel, And Other High-strength Alloys. Flute Design: Spiral Flute Design For Effective Chip Removal And Reduced Heat Buildup During Drilling. Flutes Often Designed To Help With Cooling, Enhancing Performance During Extended Use. Shank Type: Generally, Comes In Standard Round Shanks For Compatibility With Most Drill Chucks. Drill Bit Metal (6.5) Multi 6mm Material: Made From High Speed Steel (hss) With A Titanium Coating For Enhanced Durability And Wear Resistance. Diameter: Size: 6.5 Mm (this Is The Nominal Diameter Of The Drill Bit). Tip Design: Point Angle: Typically Features A 118° Or 135° Split Point Design For Efficient Penetration And Reduced Walking On Surfaces. Designed For Multi-material Applications, Including Metal, Wood, Masonry, And Plastic. Flute Design: Spiral Flute Design: Provides Effective Chip Removal And Cooling, Enhancing Performance During Drilling. Shank Type: Standard Round Shank: Compatible With Most Drills And Drill Chucks. Usage: Suitable For Drilling In Various Materials, Including: Metal (mild Steel, Aluminum) Wood Masonry (brick, Concrete) Plastics Designed For Versatility In Diy And Professional Applications. Performance Features: Durability: Engineered For Long Life, Even In Tough Applications. Precision: Provides Accurate Drilling With Minimal Burr Formation. Versatility: Can Be Used For A Wide Range Of Materials, Making It A Great All-purpose Drill Bit. Packaging: Often Available In Blister Packs Or Sets, With Clear Labeling For Easy Identification Of Size And Type. Drill Bit Mason (7.0) Drill Bit Mason (8.0) Drill Bit Mason (4.0) Drill Bit Mason (3.0) Drill Bit Mason (10) Material: Typically Made From Carbide-tipped Steel Or High Speed Steel (hss) For Durability And Strength. Diameter: Size: 7.0 Mm (nominal Diameter Of The Drill Bit). Tip Design: Tip Type: Usually Features A Carbide Tip Designed Specifically For Masonry Applications, Which Provides Excellent Cutting Performance. Point Angle: Often Has A Sharp Point Designed For Effective Penetration Into Hard Materials. Flute Design: Spiral Flute Design: Helps In The Efficient Removal Of Debris While Drilling, Which Is Crucial For Maintaining Cutting Efficiency. Cooling: The Flute Design May Aid In Heat Dissipation During Drilling. Shank Type: Sds Plus Or Standard Round Shank: Depending On The Model, It May Have An Sds Shank For Compatibility With Rotary Hammers Or A Standard Round Shank For Use In Regular Drills. Usage: Designed For Drilling Into: Masonry: Brick, Concrete, And Stone. Other Hard Materials: Ideal For Use In Construction And Renovation Projects. Performance Features: Durability: Built To Withstand High-impact Drilling In Tough Materials, Ensuring A Longer Lifespan. Precision: Provides Clean Holes With Minimal Breakout Or Chipping In Masonry Surfaces. Packaging: Usually Available In Individual Packaging Or Sets, Clearly Labeled For Easy Identification Of Size And Type. Impact Drill Power: Voltage: 18v Battery Type: Lithium-ion Battery Capacity: Typically, 2.0 Ah Or 4.0 Ah (depending On The Version). Motor: Power Output: 600 W (approximate) Speed: No-load Speed: 0 - 1,700 Rpm (depending On The Gear Setting) Impact Rate: Up To 27,000 Blows Per Minute. Torque: Max Torque: Soft Torque: 30 Nm Hard Torque: 50 Nm Torque Settings: 20+1 Adjustable Torque Settings For Precise Control. Drilling Capacity: Wood: Up To 35 Mm Steel: Up To 13 Mm Masonry: Up To 20 Mm Chuck: Chuck Type: Keyless Chuck Chuck Capacity: 1.5 – 13 Mm Weight: Tool Weight: Approximately 1.6 Kg (without Battery). Dimensions: Length: 215 Mm Height: 235 Mm Width: 60 Mm Features: Compact Design: Lightweight And Compact For Easy Handling And Maneuverability. Led Light: Integrated Led Light For Better Visibility In Dark Areas. Electronic Motor Protection (emp): Prevents Overheating And Extends The Tool's Lifespan. Soft Grip: Ergonomic Handle For Comfort During Prolonged Use. Two-speed Gearbox: For Versatile Drilling And Screwing Applications. Applications: Suitable For Drilling And Screwdriving In Various Materials, Including Wood, Metal, And Masonry. Ideal For Both Professional And Diy Applications. Max Cutting Capacity 42mm (pvc) Material: Typically Made From High Speed Steel (hss) Or Carbide Tipped For Enhanced Durability And Cutting Performance In Plastic Materials. Diameter: Max Cutting Capacity: 42 Mm (this Refers To The Maximum Diameter The Drill Bit Can Effectively Cut). Tip Design: Point Type: Often Features A Brad Point Or Split Point Design For Precise Drilling Without Wandering. Tip Angle: Designed Specifically For Optimal Cutting Through Pvc And Other Plastics. Flute Design: Flute Type: Usually, Spiral Flutes Designed To Facilitate Efficient Chip Removal, Reducing Clogging While Drilling. Cooling Features: May Include Design Elements That Help Dissipate Heat, Which Is Important When Drilling Through Plastics To Prevent Melting. Shank Type: Shank Design: Commonly Features A Standard Round Shank For Compatibility With Most Drill Chucks. Usage: Specifically Designed For Drilling Into Pvc, But Can Also Be Used On Other Plastics And Softer Materials. Ideal For Applications In Plumbing, Construction, And Diy Projects Where Plastic Materials Are Prevalent. Performance Features: Durability: Engineered For Long Lasting Performance, Especially In High-speed Drilling Applications. Precision: Provides Clean Holes With Minimal Burr Formation, Ensuring A Professional Finish. Packaging: Often Sold Individually Or In Sets, With Clear Labeling For Easy Identification Of Size And Type. Handsaw Type: Crosscut Saw: Designed For Cutting Across The Grain Of Wood. Rip Saw: Made For Cutting Along The Grain Of Wood. Panel Saw: A Versatile Saw For General Purpose Cutting. Back Saw: Typically Used For Precision Cuts, Featuring A Reinforced Spine. Blade Length: Common Lengths Range From 12 Inches To 26 Inches (300 Mm To 660 Mm), Depending On The Type Of Saw And Intended Use. Blade Material: Usually Made From High-carbon Steel For Durability And Sharpness. Some May Have A Stainless-steel Blade For Corrosion Resistance. Tooth Configuration: Teeth Per Inch (tpi): Fewer Teeth (e.g., 5-7 Tpi) For Faster Cuts In Rough Wood. More Teeth (e.g., 10-12 Tpi) For Smoother Cuts In Finer Materials. Tooth Design: Raker Teeth: Alternating Teeth For A More Aggressive Cut. Side Set Teeth: Teeth Angled To Reduce Friction And Facilitate Cutting. Kerf Width: The Width Of The Cut Made By The Saw, Typically Ranging From 0.025 Inches To 0.05 Inches (0.64 Mm To 1.27 Mm) Depending On The Blade Thickness. Handle: Material: Wood, Plastic, Or Rubber For A Comfortable Grip. Design: Usually Ergonomically Shaped To Reduce Hand Fatigue. Grip Type: May Have A Straight Or D-shaped Handle For Better Control. Weight: Weight Varies Depending On The Materials And Size, Usually Between 1 Lb To 3 Lbs (0.45 Kg To 1.36 Kg). Applications: Suitable For Woodworking, Carpentry, And General-purpose Cutting Tasks. Ideal For Both Professional And Diy Applications. Ppvc25 Material: Wheel Material: Polypropylene (pp), Known For Its Durability And Resistance To Chemicals And Moisture. Frame Material: Often Made From Steel Or Plastic, Depending On The Specific Model. Wheel Diameter: Diameter: 25 Mm (approximately 1 Inch). Load Capacity: Weight Capacity: Typically Rated For Loads Ranging From 50 Kg To 100 Kg (approximately 110 Lbs To 220 Lbs), Depending On The Specific Design And Application. Type: Type: Usually Designed As A Swivel Caster, Allowing For Easy Maneuverability. May Also Come In A Fixed Configuration For Straight-line Movement. Mounting Type: Mounting Plate: Commonly Features A Square Or Rectangular Mounting Plate With Holes For Easy Attachment To Carts, Furniture, Or Other Equipment. Stem Type: Some Models May Have A Stem For Mounting Directly Into A Socket. Braking System: Brake: Some Variants May Include A Brake Mechanism For Locking The Wheel In Place, Providing Additional Stability When Needed. Environmental Resistance: Resistant To Moisture, Making It Suitable For Use In Damp Or Humid Environments. Applications: Ideal For Use In Light-duty Applications Such As: Office Furniture (like Chairs And Desks). Carts And Trolleys. Material Handling And Logistics. Ceiling Sealant Steel Brush Battery 6.0 Ah Battery Type: Chemistry: Lithium-ion (li-ion) Series: Typically, Part Of The Bosch Professional Line, Compatible With Their 18v Tools. Capacity: Amp Hour (ah): 6.0 Ah Provides Extended Runtime For Demanding Applications. Voltage: Nominal Voltage: 18v Weight: Approximate Weight: 0.65 Kg (about 1.43 Lbs) Dimensions: Size: Typically, Around 115 Mm X 75 Mm X 50 Mm (4.5 In X 3 In X 2 In), Depending On Design. Charging Time: With Fast Charger (e.g., Bosch Gal 18v 40): Approximately 30-45 Minutes For A Full Charge. Standard Charger: Typically, 1-2 Hours For A Full Charge. Compatibility: Compatible Tools: Works With A Wide Range Of Bosch 18v Cordless Power Tools, Including Drills, Impact Drivers, Saws, And More. Features: Electronic Cell Protection (ecp): Protects Against Overload, Overheating, And Deep Discharge, Extending Battery Life. Bosch Coolpack Technology: Helps Dissipate Heat, Reducing Heat Buildup And Prolonging Battery Life. Led Charge Level Indicator: Built-in Leds Indicate The Remaining Battery Charge Level For Better Visibility. Durability: Impact Resistant: Designed To Withstand Tough Job Site Conditions. Weather Resistant: Suitable For Use In Various Environmental Conditions, Although Prolonged Exposure To Extreme Conditions Should Be Minimized. Applications: Ideal For Professional And Diy Applications Requiring High Performance And Longevity, Such As Construction, Woodworking, And Other Demanding Tasks.

Details: Description Please Quote By: Lot No. "item Description (item Name & Technical Specifications)" Qty. Unit Approved Budget For The Contract (abc) 1 Supply And Delivery Of Materials For Rehabilitation Of Quarantine And Risk Assessment Facilities At Bfar-niftc Supply And Delivery Of Materials For Rehabilitation Of Quarantine And Risk Assessment Facilities At Bfar-niftc Supply And Delivery Of Materials For Rehabilitation Of Quarantine And Risk Assessment Facilities At Bfar-niftc Cement Cement Cement 240 Bag 81,600.00 Gravel Gravel Gravel 16 Elf 43,200.00 White Sand White Sand White Sand 22 Elf 49,500.00 Chb #5 Chb #5 Chb #5 80 Pcs 2,400.00 Deformed Steel Bar 10mm Deformed Steel Bar 10mm Deformed Steel Bar 10mm 640 Pcs 129,920.00 Deformed Steel Bar 12mm Deformed Steel Bar 12mm Deformed Steel Bar 12mm 50 Pcs 14,400.00 Water Proofing Cement Water Proofing Cement Water Proofing Cement 140 Pouch 8,400.00 G.i Wire #16 (20kgs) G.i Wire #16 (20kgs) G.i Wire #16 (20kgs) 2 Roll 5,100.00 960 Watts Concrete Vibrator 960 Watts Concrete Vibrator 960 Watts Concrete Vibrator 1 Set 4,950.00 1 Bagger Heavy Duty Concrete Mixer 1 Bagger Heavy Duty Concrete Mixer 1 Bagger Heavy Duty Concrete Mixer 1 Set 45,000.00 Carpentry Works Carpentry Works Carpentry Works Fiber Cement Board 4.5mmx4"x8" Fiber Cement Board 4.5mmx4"x8" Fiber Cement Board 4.5mmx4"x8" 28 Pcs 27,328.00 Metal Furring 0.6mm X 1" X 2" X 5m Metal Furring 0.6mm X 1" X 2" X 5m Metal Furring 0.6mm X 1" X 2" X 5m 44 Pcs 9,504.00 Carrying Channel 0.8mm X1"x2"x5m Carrying Channel 0.8mm X1"x2"x5m Carrying Channel 0.8mm X1"x2"x5m 18 Pcs 4,860.00 Blind Rivet 1/8"x 3/4" Blind Rivet 1/8"x 3/4" Blind Rivet 1/8"x 3/4" 1 Box 750.00 Drill Bit 1/8" (stainless) Drill Bit 1/8" (stainless) Drill Bit 1/8" (stainless) 10 Pcs 1,980.00 Riveter Riveter Riveter 1 Pcs 972.00 Gasa Tape (big) Gasa Tape (big) Gasa Tape (big) 1 Pcs 300.00 W-clip W-clip W-clip 100 Pcs 1,000.00 Kiln Drywood 1"x12"x12' Kiln Drywood 1"x12"x12' Kiln Drywood 1"x12"x12' 2 Pcs 3,600.00 Plywood 3/4" X 4'x8' Plywood 3/4" X 4'x8' Plywood 3/4" X 4'x8' 1 Pcs 2,100.00 Kiln Drywood 2"x2"x8' Kiln Drywood 2"x2"x8' Kiln Drywood 2"x2"x8' 3 Pcs 498.00 Kiln Drywood 1/2"x1"x10' Kiln Drywood 1/2"x1"x10' Kiln Drywood 1/2"x1"x10' 5 Pcs 720.00 Welding Works Welding Works Welding Works 304 Stainless Tubular 1.5mm X 1 1/2" X 1 1/2"x6m 304 Stainless Tubular 1.5mm X 1 1/2" X 1 1/2"x6m 304 Stainless Tubular 1.5mm X 1 1/2" X 1 1/2"x6m 3 Pcs 11,664.00 304 Stailess Pipe 1 1/2" X S40 X 6m 304 Stailess Pipe 1 1/2" X S40 X 6m 304 Stailess Pipe 1 1/2" X S40 X 6m 1 Pc 6,900.00 304 Stainless Sheet 1.5mm X 6m 304 Stainless Sheet 1.5mm X 6m 304 Stainless Sheet 1.5mm X 6m 6 Sheet 70,200.00 Welding Rod 2.5mm E6013 Welding Rod 2.5mm E6013 Welding Rod 2.5mm E6013 5 Kgs 1,350.00 Stainless Rod 2.0mm Stainless Rod 2.0mm Stainless Rod 2.0mm 3 Kgs 4,500.00 Plain Round Bar 16mm Plain Round Bar 16mm Plain Round Bar 16mm 3 Pcs 1,890.00 Cylindrical Hinge 1" Cylindrical Hinge 1" Cylindrical Hinge 1" 2 Pcs 198.00 Cut-off Wheel 14 Cut-off Wheel 14 Cut-off Wheel 14 10 Pcs 5,280.00 Cutting Disc Super Thin 4" Cutting Disc Super Thin 4" Cutting Disc Super Thin 4" 20 Pcs 3,180.00 Flap Disc Flap Disc Flap Disc 20 Pcs 1,560.00 Grinding Stone Grinding Stone Grinding Stone 5 Pcs 600.00 Buffing Soap Buffing Soap Buffing Soap 2 Pcs 1,440.00 Buffing Gray Buffing Gray Buffing Gray 20 Pcs 1,560.00 Buffing Cloth Buffing Cloth Buffing Cloth 20 Pcs 1,560.00 Tamsi Tamsi Tamsi 2 Pcs 108.00 304 Stainless Tubular 1.5mm X 1" X 1"x6m 304 Stainless Tubular 1.5mm X 1" X 1"x6m 304 Stainless Tubular 1.5mm X 1" X 1"x6m 20 Pcs 52,560.00 300a Gasless Welding Machine 300a Gasless Welding Machine 300a Gasless Welding Machine 1 Set 7,800.00 Angle Bar 1/4"x2"x2"x6m Angle Bar 1/4"x2"x2"x6m Angle Bar 1/4"x2"x2"x6m 2 Pcs 2,552.00 Chalk Stone Chalk Stone Chalk Stone 5 Pcs 60.00 Round Bar 16mm X 6m Round Bar 16mm X 6m Round Bar 16mm X 6m 4 Pcs 2,520.00 Stainless Mig Wire Flux Cored Stainless Mig Wire Flux Cored Stainless Mig Wire Flux Cored 2 Kgs 3,300.00 Flat Bar 1/4" X 2" X 6m Flat Bar 1/4" X 2" X 6m Flat Bar 1/4" X 2" X 6m 2 Pcs 1,800.00 Angle Bar 1/4" X 1 1/2" X 1 1/2" X 6m Angle Bar 1/4" X 1 1/2" X 1 1/2" X 6m Angle Bar 1/4" X 1 1/2" X 1 1/2" X 6m 6 Pcs 6,120.00 Painting Works Painting Works Painting Works Flat Latex Flat Latex Flat Latex 3 Pail 10,218.00 Semi-gloss Latex Semi-gloss Latex Semi-gloss Latex 3 Pail 11,664.00 Acry Color Rawsienna Acry Color Rawsienna Acry Color Rawsienna 3 Liter 678.00 Acry Color Thalo Blue Acry Color Thalo Blue Acry Color Thalo Blue 3 Liter 678.00 Quick Dry Enamel White Quick Dry Enamel White Quick Dry Enamel White 4 Gallon 4,560.00 Quick Dry Enamel Royal Blue Quick Dry Enamel Royal Blue Quick Dry Enamel Royal Blue 4 Gallon 5,112.00 Paint Thinner Paint Thinner Paint Thinner 8 Gallon 4,800.00 Plexi Bond Plexi Bond Plexi Bond 6 Gallon 7,020.00 Skimcoat Skimcoat Skimcoat 3 Bag 2,928.00 Hydrolock Water Proofing Hydrolock Water Proofing Hydrolock Water Proofing 6 Gallon 12,600.00 Epoxy Primer Epoxy Primer Epoxy Primer 1 Gallon 1,426.00 Lacquer Thinner Lacquer Thinner Lacquer Thinner 1 Gallon 526.00 Hi-gloss Epoxy Enamel Black Hi-gloss Epoxy Enamel Black Hi-gloss Epoxy Enamel Black 1 Liter 1,050.00 Paint Brush 2" Paint Brush 2" Paint Brush 2" 5 Pcs 345.00 Paint Brush 1 1/2" Paint Brush 1 1/2" Paint Brush 1 1/2" 10 Pcs 600.00 Baby Roller Baby Roller Baby Roller 10 Pcs 900.00 Roller 7" Roller 7" Roller 7" 5 Pcs 720.00 Paleta (big) Paleta (big) Paleta (big) 4 Pair 276.00 Sanding Paper #100 Sanding Paper #100 Sanding Paper #100 20 Pcs 480.00 Oil Wood Stain Maple Oil Wood Stain Maple Oil Wood Stain Maple 1 Liter 286.00 Roller Paint Tray 12"x 10" Roller Paint Tray 12"x 10" Roller Paint Tray 12"x 10" 5 Pcs 450.00 Lacquer Sanding Sealer Lacquer Sanding Sealer Lacquer Sanding Sealer 2 Liter 1,052.00 Super Clear Gloss Varnish Super Clear Gloss Varnish Super Clear Gloss Varnish 2 Liter 1,560.00 Sanding Paper#400 Sanding Paper#400 Sanding Paper#400 10 Pcs 240.00 Roller 9" Roller 9" Roller 9" 4 Pcs 636.00 Electrical Works Electrical Works Electrical Works Thhn Stranded Wire 3.5mm Thhn Stranded Wire 3.5mm Thhn Stranded Wire 3.5mm 1 Box 7,800.00 Thhn Stranded Wire 2.0mm Thhn Stranded Wire 2.0mm Thhn Stranded Wire 2.0mm 1 Box 4,800.00 Panel Box 2 Branches 4 Holes Plug-in Type Panel Box 2 Branches 4 Holes Plug-in Type Panel Box 2 Branches 4 Holes Plug-in Type 1 Box 900.00 Circuit Breaker 60a Plug In Type Circuit Breaker 60a Plug In Type Circuit Breaker 60a Plug In Type 1 Pcs 1,726.00 Circuit Breaker 30a Plug In Type Circuit Breaker 30a Plug In Type Circuit Breaker 30a Plug In Type 1 Pcs 1,200.00 Circuit Breaker 20a Plug In Type Circuit Breaker 20a Plug In Type Circuit Breaker 20a Plug In Type 1 Pcs 1,200.00 Flat Cord 2.0mm Flat Cord 2.0mm Flat Cord 2.0mm 20 Meter 1,680.00 T8 Led Tube Light Box Type Set T8 Led Tube Light Box Type Set T8 Led Tube Light Box Type Set 4 Set 2,704.00 Bulb Receptacle Bulb Receptacle Bulb Receptacle 2 Pcs 108.00 Led Bulb 13w Led Bulb 13w Led Bulb 13w 2 Pcs 540.00 Electrical Tape (big) Electrical Tape (big) Electrical Tape (big) 6 Pcs 456.00 2 Gang Switch W/ Plate 2 Gang Switch W/ Plate 2 Gang Switch W/ Plate 2 Pcs 360.00 2 Gang Outlet W/ Plate 2 Gang Outlet W/ Plate 2 Gang Outlet W/ Plate 5 Pcs 900.00 Single Switch W/ Plate Single Switch W/ Plate Single Switch W/ Plate 2 Pcs 258.00 Junction Box W/ Cover Junction Box W/ Cover Junction Box W/ Cover 6 Pcs 456.00 Utility Box Utility Box Utility Box 9 Pcs 486.00 Plug (flat) Plug (flat) Plug (flat) 4 Pcs 216.00 Convinience Outlet 10a 250v Convinience Outlet 10a 250v Convinience Outlet 10a 250v 4 Pcs 720.00 Upvc Corrugated Flexible Pipe 20mm X 50m Upvc Corrugated Flexible Pipe 20mm X 50m Upvc Corrugated Flexible Pipe 20mm X 50m 1 Roll 676.00 Electrical Pipe 1/2" Electrical Pipe 1/2" Electrical Pipe 1/2" 12 Pcs 2,520.00 Cable Tie 12" Cable Tie 12" Cable Tie 12" 2 Pack 360.00 Metal Clamp 1/2" Metal Clamp 1/2" Metal Clamp 1/2" 30 Pcs 300.00 Elbow 1/2 (orange) Short Elbow 1/2 (orange) Short Elbow 1/2 (orange) Short 8 Pcs 192.00 Form Works Form Works Form Works Phenolic Board 1/2" X 4' X 8' Phenolic Board 1/2" X 4' X 8' Phenolic Board 1/2" X 4' X 8' 48 Pcs 54,048.00 Cocolumber 2"x3"x12' Cocolumber 2"x3"x12' Cocolumber 2"x3"x12' 80 Pcs 17,280.00 Cocolumber 2"x3"x10' Cocolumber 2"x3"x10' Cocolumber 2"x3"x10' 180 Pcs 32,400.00 Cwn 4" Cwn 4" Cwn 4" 20 Kgs 3,000.00 Cwn 3" Cwn 3" Cwn 3" 20 Kgs 3,000.00 Cwn 1 1/2" Cwn 1 1/2" Cwn 1 1/2" 10 Kgs 1,800.00 Concrete Nail 3" Concrete Nail 3" Concrete Nail 3" 1 Kgs 180.00 Roof Works Roof Works Roof Works Corrugated Fiber Roof 3' X 12' Corrugated Fiber Roof 3' X 12' Corrugated Fiber Roof 3' X 12' 4 Pcs 3,240.00 Tekscrew 2 1/2" Tekscrew 2 1/2" Tekscrew 2 1/2" 50 Pcs 200.00 Flashing (green) Flashing (green) Flashing (green) 3 Pcs 1,578.00 Mesh Gutter Guards Anti Rust Protection Cover 5" X 6m Mesh Gutter Guards Anti Rust Protection Cover 5" X 6m Mesh Gutter Guards Anti Rust Protection Cover 5" X 6m 2 Pcs 1,800.00 Resin Plastic Sewers Grille 50cmx20cmx2cm Resin Plastic Sewers Grille 50cmx20cmx2cm Resin Plastic Sewers Grille 50cmx20cmx2cm 3 Pcs 1,578.00 Plumbing Works Plumbing Works Plumbing Works Stainless Kitchen Sink (complete Accessories) Stainless Kitchen Sink (complete Accessories) Stainless Kitchen Sink (complete Accessories) 1 Set 3,450.00 2" Pvc Pipe Blue 2" Pvc Pipe Blue 2" Pvc Pipe Blue 7 Pcs 4,284.00 2" Pvc End Cap Blue 2" Pvc End Cap Blue 2" Pvc End Cap Blue 2 Pcs 408.00 2" Pvc Tee Blue 2" Pvc Tee Blue 2" Pvc Tee Blue 7 Pcs 1,428.00 2" Pvc Ball Valve 2" Pvc Ball Valve 2" Pvc Ball Valve 3 Pcs 2,028.00 2" Pvc Elbow Blue 2" Pvc Elbow Blue 2" Pvc Elbow Blue 6 Pcs 1,224.00 2" Pvc Male Adaptor Blue 2" Pvc Male Adaptor Blue 2" Pvc Male Adaptor Blue 4 Pcs 816.00 2" Pvc Female Adaptor Blue 2" Pvc Female Adaptor Blue 2" Pvc Female Adaptor Blue 4 Pcs 816.00 2" X 1/2" Pvc Reducer Blue 2" X 1/2" Pvc Reducer Blue 2" X 1/2" Pvc Reducer Blue 3 Pcs 612.00 2" Pvc Orange Pipe 2" Pvc Orange Pipe 2" Pvc Orange Pipe 10 Pcs 3,300.00 2" Pvc Orange Elbow 2" Pvc Orange Elbow 2" Pvc Orange Elbow 10 Pcs 1,360.00 2" Pvc Orange Tee 2" Pvc Orange Tee 2" Pvc Orange Tee 5 Pcs 680.00 2" Pvc Clean Out 2" Pvc Clean Out 2" Pvc Clean Out 5 Pcs 900.00 2" Pvc Wye 2" Pvc Wye 2" Pvc Wye 3 Pcs 540.00 2" X 3/4" Pvc Reducer Blue 2" X 3/4" Pvc Reducer Blue 2" X 3/4" Pvc Reducer Blue 3 Pcs 342.00 3/4" Pvc Pipe Blue 3/4" Pvc Pipe Blue 3/4" Pvc Pipe Blue 10 Pcs 2,140.00 3/4" Pvc Elbow Blue 3/4" Pvc Elbow Blue 3/4" Pvc Elbow Blue 10 Pcs 300.00 3/4" Pvc Clam W/ Tox And Screw 3/4" Pvc Clam W/ Tox And Screw 3/4" Pvc Clam W/ Tox And Screw 50 Pcs 450.00 3/4" X 1/2" Pvc Reducer Blue 3/4" X 1/2" Pvc Reducer Blue 3/4" X 1/2" Pvc Reducer Blue 2 Pcs 48.00 1/2" Pvc Pipe Blue 1/2" Pvc Pipe Blue 1/2" Pvc Pipe Blue 20 Pcs 2,280.00 1/2" Pvc Female Adator Blue 1/2" Pvc Female Adator Blue 1/2" Pvc Female Adator Blue 10 Pcs 240.00 1/2" Pvc Faucet 1/2" Pvc Faucet 1/2" Pvc Faucet 10 Pcs 1,140.00 1/2" Pvc Ball Valve 1/2" Pvc Ball Valve 1/2" Pvc Ball Valve 6 Pcs 594.00 1/2" Pvc Elbow Blue 1/2" Pvc Elbow Blue 1/2" Pvc Elbow Blue 15 Pcs 360.00 1/2" Pvc Tee Blue 1/2" Pvc Tee Blue 1/2" Pvc Tee Blue 10 Pcs 240.00 1/2" Pvc Clam W/ Tox And Screw 1/2" Pvc Clam W/ Tox And Screw 1/2" Pvc Clam W/ Tox And Screw 50 Pcs 350.00 1" Pvc Pipe Blue 1" Pvc Pipe Blue 1" Pvc Pipe Blue 6 Pcs 1,800.00 1" Pvc Elbow Blue 1" Pvc Elbow Blue 1" Pvc Elbow Blue 12 Pcs 552.00 1" Pvc Male Adaptor Blue 1" Pvc Male Adaptor Blue 1" Pvc Male Adaptor Blue 2 Pcs 92.00 1" Pvc Female Adaptor Blue 1" Pvc Female Adaptor Blue 1" Pvc Female Adaptor Blue 2 Pcs 92.00 1" Pvc Ball Valve 1" Pvc Ball Valve 1" Pvc Ball Valve 5 Pcs 1,130.00 Pvc Solvent 400cc Pvc Solvent 400cc Pvc Solvent 400cc 2 Can 1,140.00 Ptfe (small) Ptfe (small) Ptfe (small) 10 Pcs 240.00 Epoxy A And B 1 Liter Epoxy A And B 1 Liter Epoxy A And B 1 Liter 2 Can 2,700.00 Empty Bottle 6 Liter Capacity Empty Bottle 6 Liter Capacity Empty Bottle 6 Liter Capacity 3 Pcs 318.00 16w Uv Water Sterilizer Purifier 2gpm 16w Uv Water Sterilizer Purifier 2gpm 16w Uv Water Sterilizer Purifier 2gpm 2 Set 6,600.00 Submersible Pump 42w. Flow Rate: 6000l/h @ 0 Ft. Max Height: 5m Submersible Pump 42w. Flow Rate: 6000l/h @ 0 Ft. Max Height: 5m Submersible Pump 42w. Flow Rate: 6000l/h @ 0 Ft. Max Height: 5m 4 Pcs 12,000.00 Tiling Works Tiling Works Tiling Works Porcelain Tiles 60cm X 60 Cm (white) Porcelain Tiles 60cm X 60 Cm (white) Porcelain Tiles 60cm X 60 Cm (white) 32 Pcs 11,136.00 Tile Grout (2 Kgs/pack) Tile Grout (2 Kgs/pack) Tile Grout (2 Kgs/pack) 1 Pack 180.00 Aluminum Tile Trim Aluminum Tile Trim Aluminum Tile Trim 6 Pcs 2,268.00 Tile Adhesive Tile Adhesive Tile Adhesive 5 Bags 4,130.00 Total 922,959.00

Details: Description 1. The Municipality Of Esperanza, Masbate Through The Dole Region V Fund Intends To Apply The Sum Of One Million Eight Hundred Sixty-two Thousand Four Hundred Forty-three Pesos And 60/100 Only (₱1,862,443.60) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply And Delivery Of Materials, Supplies And Equipment For The Provision Of Livelihood Opportunities To Parents Of Child Laborers In The Municipality Of Esperanza, With Project Reference Number (prn) Of Esperanza-gds-2024-11-29. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Esperanza, Masbate Now Invites Bids For The Supply And Delivery Of Materials, Supplies And Equipment For The Provision Of Livelihood Opportunities To Parents Of Child Laborers In The Municipality Of Esperanza, With Project Reference Number (prn) Of Esperanza-gds-2024-11-29, With The Following Specifications: Item No. Qty. Unit Description Carpentry 3 Pieces 1. Claw Hammer, Head Weight;160z; Overall Weight;170z-23oz; Forged Steel Head; Smooth Face; Fiberglass 2 Units 2. Angle Grinder, Portable, 4 'capacity, 220-240v/60hz., 710 Watts, With Side Handle Grips, Angle Grinder Guard, Power Plug: Us Type 3 Units 3. Circular Saw, Voltage; 220-240v-frequency 50/60hz Input Power: 1400w No-load Speed; 4800rpm Blade Diameter; 185mm Cutting Capacity;45 Degree: 44mm 90 Degree;65 Mm Maximum Cutting Depth: At Least 90 Degree 62mm, Weight Maximum 5.2kg; Item Approx. Dimension 15-17cm, 25-28cm, 30-35cm 3 Sets 4. Combination Wrench, 16pcs, (6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm 21mm, 22mm, 24mm, 27mm, 30mm, 32mm), Drop Forged Alloy Or Chrome Vanadium Steel Construction, Lobular Box End Design 2 Pieces 5. Crow Bar, 36 'long; Length Tolerance; - 1/8 Forged Steel Carbon 3 Units 6. Electric Grinder Continuous Rating Input; 850w Wheel Diameter: 100mm (4" Inch) No Load Speed: 11,000r/min Dimension (lxwxh): 273x118x101mm (10/34x4-5/8x4") Net Weight: 1.8 Kg(4.0lbs.) Power Supply Cord: 2.0m 6.6ft.) 3 Units 7. Electric Planer Rated Input Power: 650w Planing Width; 82mm Cutting Depth: 0-2.6mm Weight:2.8kg Adjustable Rebating Depth: 0-9mm No-load Speed: 16,500rpm Dimension: 158mmx20mmx140mm Powerful Planer With Max. 2.6mm Cutting Depth Powerful 650 W Motor 3 Pieces 8. Portable Jig Saw, Input Power; 600-850w; Power Voltage: 220-240v; Frequency: 60hz; Adjustable Blade Angle Up To 45 Degrees; Cord Length: 1 Meter; Plus Type; Us Type; With Variable Speed Setting; Top Handle With Quick Release Blade 3 Sets 9. Wood Chisel; 4-pcs. Set(6mm;12mm;19mm;25mm) Tempered Chrome Carbon Steel Blade, Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 1 Unit 10. Electric Router Large Plunge Capacity 0-65mm (0-2-3/8") Continuous Rating Input:1,600wm Cap.: Collet: 1/2"m Plunge Capacity:0 - 65mm (0 - 2-9/16")m Base Dia.:160mm (6-1/4") No Load Speed (rpm):23,000/min Height:287mm (11-1/4" 1 Piece 11. L-square Ruler; Material : Stainless Steel Measure Length :10 / 25cm;ruler Size :10 X 4.5(l*w) / 25.3cm X 11.4cm(l*w) Weight :102.4g 1 Piece 12. Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade: Dimension 16ft. (l) X 25mm (w) Dried Fish Making/vending 2 Rolls 1. Net For Fish Drying 1 Roll = Approx30meters For Every 1meter Measurement: Width 2.5meters (105inches) X Length 1meter (39inches) Nylon Mesh Any Color 1 Piece 2. Basin, 22 Inch, Plastic Material, 1" Thickness 1 Piece 3. Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 1 Piece 4. Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 1 Piece 5. Cutting Board, 38x25cm Marble, Double Sided 1 Piece 6. Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 1 Piece 7. Fish Scaler, 20cm Stainless Steel 1 Piece 8. Fish Scraping Tool, 20cm Stainless Steel 1 Piece 9. Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 6 Pieces 10. Styro Box / Big / Size : (l) 22” X (w) 15 “ X (h) 17” 1 Pack 11. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 15 X 20cm 1 Pack 12. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 17 X 25cm 1 Pack 13. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 20 X 30cm 1 Pack 14. Vacuum Bag / Vacuum Pouch /vacuum Sealer | Bpa Free, Commercial Grade For Food Storage & Sauce, 100pcs Each Pack 25 X 35cm 1 Unit 15. Vacuum Sealing Machine, Size: 35 Cm * 14.7 Cm * 6.7 Cm, Color: White Weight: 1.2kg, Material: Abs Material, Accessories: Machine *1, Rated Voltage: 220v, Rated Frequency: 50hz, Rated Power: 110w, Vacuum: -65kpa, Vacuum Sealing Time: 10-25s, Single Sealing Time: 6-17s 1 Unit 16. Weighing Scale: Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) Fishing 21 Pieces 1. Banka With Marine Engine (banka Fiberglass With 17ft. Long Katig, L-15ft., Wide-2ft.,depth-2ft.) Gasoline Marine Engine 4-stroke Model: Se 75m Max. Hp 7.5hp, Displacement: 212cc Max Rpm: 3600 (please See Attached Photo Design) 2 Units 2. Diesel Marine Engine 12hp Type: Single Cylinder, Vertical, Air Cooled, 4 Stroke, Direct Injection Bore & Stroke: 86*72 Displacement: .418l Compression Ratio: 19 Horsepower. 12hp Rotation Speed: 3600 Rpm Starting System: Marine Pulley Fuel Tank Capacity: 5.5liters Lube Oil: Sae 10w-30, 15w-40 Lube Oil Capacity: 1.65liters Dimension:420*440*49 2 Bundles 3. Pamo #4 2,000 Pieces 4. Pataw # 3 1 Piece 5. Stainless Steel Round Bar Shafting 1" X 1 Meter Length 9 Bundles 6. Lambat Nylon #4 .25(1000 Mtrs. Is Equal To 1 Bundle) 10 Bundles 7. Lambat Nylon #7 .25(1000 Mtrs. Is Equal To 1 Bundle) 12 Rolls 8. Pisi #7 30 Kilograms 9. Tingga Pahaba 1 Bundle 10. Lambat Nylon #6 .25(1000 Mtrs. Is Equal To 1 Bndle) 12 Kilograms 11. Nylon #130 4 Kilograms 12. Nylon #140 2 Bundles Pamo Fishing Net #25 Food Vending 19 Pieces 1. Caldero Cast Iron 48cmx42cm Depth X Diameter 20 Liters Double Handle 0.5cm Thickness 17 Sets 2. Casserole (5pcs Aluminum) 16,18,20,22,24cm 10 Pieces 3. Food Glass Stand, With Aluminum Frame Glass And Screen Sliding Door (18x 20 X 36cm) 2 Layers 16 Pieces 4. Food Tong (12 Inches ( 29 X 4.6cm ) Stainless Steel) 15 Pieces 5. Kawa Cast Iron 45 Cm X 10" Depth 20 Pieces 6. Kawali Cast Iron Up To Handle 5 28.5cm X High 7.3cm 17 Sets 7. Knife Set Material: Stainless Steel 6.5’’cleaver 8’’chef Knife 8’’slicer Knife 5’’utility Knife 3.5’’fring Knife 1pc Scissor 21 Sets 8. Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device; Safety Push Protection For Leakage; Gas Auto Safe Controller; Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp 16 Pieces 9. Sandok Size 3 - 12 Inches Stainless Steel 21 Units 10. Stove Double Burner (automatic Ignition Powerful Flame Controller, Stainless Steel Body, (weight:3.43kg) 710x390x145mm) 12 Pieces 11. Strainer Stainless Steel 28cm 4 Sets 12. Monobloc Plastic Table And Chair Set (6 Seaters) Table Size: 30*48 In Green 1 Piece 13. Basin, 22 Inch, Plastic Material, 1" Thickness 90 Pieces 14. Food Tray Stainless Steel W/ Glass Cover (h - 7cm, W - 26cm, L - 33cm) 4 Pieces 15. Chopping Board Diameter 30cm Size: 36x45x2 11 Pieces 16. Palamig/ Juice Dispenser, Acrylic With Free Plastic Ladle 12liters, 9x16 Inches 8 Pieces 17. Pressure Cooker, Food Grade Aluminum Alloy, 19cm-height, 18cm-handle Length With Rubber, 20cm Diameter 15 Sets 18. Steamer Stainless Steel With Heat Resistant Handle 5 Layers (height:l 17.2cm,diameter:25.7cm) 5 Units 19. Blender, 5-6 Cups (1.25l To 1.5l) Heat Resistant Glass Jars, 450watts Motor, 220v-250w, 10-speed Push Button; With Pulse Option For Precise Blending, Power Plug: Us Type 6 Pieces 20. Mixing Bowl Medium, Diameter:28cm, Height:11.2cm, Stainless 4 Pieces 21. Baking Sheet / Tray, Stainless Steel Plain Food Serving Tray Baking Sheet Pan Rectangle 4.8cm Deep 27x20x4.8cm 2 Units 22. Baking Electric 4-layer Oven 220v, 50*30*40cm, 8kg, Digital Control, Digital Display, Easy Cleaning, Mechanical Control, Timer 48l Large Capaciy 1 Set 23. Lpg 11kg W/ 1.5m Hose And Full Valve Regulator, With 2pcs Hose Clamp (complete Set) 2 Pieces 24. Measuring Cups (set For Dry), 8pcs. Slique Stackable Compact Measuring, Stainless 2 Units 25. Rice Grinder Voltage: 220v 50-60hz Motor Power: 2.2 Kw Motor Speed: 1400 R/min. Production Particle Size: 25-100 Mesh Size: 65x25.5x74.5cm Weight: 30kg Motor: Copper Core 150 Steel Mill Model: Powder 70kg/h Slurry 60kg/h 1 Unit 26. Nego Kart With Bicycle W/ Gas Stove Burner Hole Nego Kart Specification: Roofing: Polycarbonated Roof (170x117x30.5cm); Angle Bar Steel Framing (welded); Blind Rivets Body (cart): Tubular Steel Framing (welded); Stainless Steel Sheet As Top Cover (130x75cm); 2 (70x55cm) Folding Ledges W/ Stainless Steel Sheet Supported By Round Tube Steel Pipe About 2mm, 1 (130x20cm) Fixed Front Ledge With Stainless Steel; Blind Rivets; Plain G.i Sheet On Internal Flooring Supported By 5mm Flat Bar Iron And Steel Bar Iron; Body Covered By Plain Gi Sheet; Fully Painted Internally & External Color Blue; Hole: Gas Stove Burner (600mm Dia, 150mm Depth); With 1 Side Wheel: Tire Size (20" X 2.125 Jumbo), Interior Tube (20" X 2.125); With Entire Front Weatherproof Sticker Logo Of Dole And Dilp & Tourism Spot Bicycle Specifications: Bmx Type Bike Frame Front And Rear Free Wheel Hub For Rim Set Single Speed Tread Type (wheel Set), Tire Size (20" X 2.125 Jumbo), Interior Tube (20" X 2.125) Bmx Handlebar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp With Spring), Crank Pedals (175mm-180mm Cracks)." 2 Pieces 27. Spatula (big), 1pc. Heat Resistant Silicone 1 Unit 28. Stove, Stove Type: Gas, Number Of Burners:3, Input Voltage:240v, Power Consumption:500w, Weight:7kg, Dimension (l X W X H): 56cm X 26cm X 9.5cm Heavy Duty 6 Pieces 29. Sandok: Length: 27cm, Width Of Scooper: 7cm Stainless Steel 1 Piece 30. Barbeque Grill Folding Thick Stainless Steel - Size: (l)60cm X (h)22cm X (w)33cm Black Color 1 Unit 31. Weighing Scale: Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 2 Pieces 32. Syanse Size 3 - 12 Inches Stainless Steel 1 Piece 33. Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles; 12 Inch Long 1 Unit 34. Coconut Grinder (hxlxw) 15cm X 16.5cm X 13cm, 1/2", 220v/60hz/1.1a, 370w, 3470rpm Welding 1 Pair 1. Angle Grinder Cutting Discs, 4", 107x16mm 1 Unit 2. Angle Grinder, Portable, 4" Capacity, 220-240v/60hz, 710 Watts, With Side Handle Grips, Angle Grinder Guard, Power Plug: Us Type 1 Piece 3. Ball Pein Hammer, Weight: 16oz/450g, Drop-forged Hammerhead, Heat Treatment, 45 Carbon Steel, Fiberglass Handle 1 Piece 4. C Clamp, Alloy Steel, Size- 6", Depth- 40mm, Max Clamp- 23mm, Body Width- 75mm, Jaw Length- 17mm, Jaw Width- 21mm, T Length- 178mm, Weight- 196 1 Piece 5. Chipping Hammer, 290mm Chisel And Point Hammer With Spring Handle, 300g 1 Piece 6. Gloves, Rubber Material, 16" Or 43cm 1 Piece 7. Hammer (maso), 2lbs Double-faced Steel Head With Rubberized Handle, 29.5cm Long 1 Piece 8. Metal File, 6pcs File/set, Diameter- 3mm, Size- 140mm (5.5") 1 Unit 9. Portable Welding Machine, 2 In 1 Inverter Welding Machine 200 Apms, 220-240v, 60hz, 1pc Tig Torch Set, 1 Pc Electrode Holder, 1 Pc Ground Clamp, Duty Cycle 60% Or Higher, Power Plug: Us Type B 1 Piece 10. Sheet Metal Gauge, Metal, 72x25mm 1 Piece 11. Speed Square,6" Triangular Ruler, Aluminum Alloy, 180mm, 255mmspeed Square 1 Pair 12. Welding Boots, Leather Material, Heel Height: Low (1cm-3cm), Boot Height: Knee-high 1 Piece 13. Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered, Light Shade:din9-13, Dark Shade: Din4, Way To Shift Dark State: Outer Control Stepless Shift, Switching Time: 1/25000s, Delay Time: 0.1-0.8s, Sensitivity Adjustment: Stepless Control, Delay Adjustment: Stepless Control, Operation Temperature: -5 Degrees- 55 Degrees, Active Viewing Area 93mmx43mm, Active Viewing Area Size: (+/- 10mm) 1 Set 14. Welding Magnets, 6pcs/set (2 X 75lb) (2 X 50lb) (2 X 25 Lb) 1 Piece 15. Welding Pliers, 210mm, L-220mm, H- 11mm, W- 55mm 1 Piece 16. Welding Rod Holder, Upper Iron, Lower Brass (300 Amp Capacity) 2.0 - 6.35mm (5/64"-1/4") Length- 250mm 10 Kilograms 17. Welding Rod, 2.0mmx300mm (5/64"x12") Delivery Of The Goods Is Required To Be Delivered For A Period Of Fifteen (15) Days From Receipt Of Ntp. Bidders Should Have Completed, Within Twenty-six (26) Calendar Days From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Municipality Of Esperanza, Masbate And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm Philippine Standard Time (pst). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 2, 2024 To December 16, 2024 During 8:00am To 5:00pm Pst From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (₱5,000.00). 6. The Municipality Of Esperanza, Masbate Will Hold A Pre-bid Conference On The Aforementioned Procurement On December 2, 2024 At 10:00am Pst At The Conference Hall, 3rd Floor, Municipal Building, Poblacion, Esperanza, Masbate. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below Before December 16, 2024 At 2:00pm Pst. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On December 16, 2024 At 2:00pm Pst At The Conference Hall, 3rd Floor, Municipal Building, Poblacion, Esperanza, Masbate. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Municipality Of Esperanza, Masbate Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: The purpose of this consultation is to provide training to Rsma-r trainees to understand and apply food hygiene methods, to know the obligations and regulations of the profession, to identify critical points and take corrective measures, to understand microbial development and the consequences of food poisoning, to be made aware of the rules of hygiene, safety and cleanliness of premises and finally to understand the importance of suitable and rational cleaning.

Details: Hansel Ltd’s aim is to establish a dynamic purchasing system, which is targeted at the User Services of the premises and the provision of complementary or separate supplementary services as defined by the Customer in the performance plug-in Terms and Conditions for Customers in the Customer’s Accounts or Defined by the Customer”, “The user services of the premises may be tailored to the operating environment only as a result of the Sharing Services” Cleaning services and Services Assistant Tasks.", "Cleaning Services Contain: ""; Maintenance and Basic Cleanings"; Separate Order Additional Services" The acquisjen and distribution of goods and services associated with the cleaning task (such as the acquista of sanitary supplies and dishwasher materials) Separately subscribed Maintenance and Fundamental Services, such as Custody Services Caused by Orders » » • Procurement and/or Pro Lisä Supplementary Services, such as Exchange Service, Customer’s Own Own carpet maintenance service, Transportation of Collection Paper to Waste Collection Point, Proning of Data Protection Maäls and Disposing of Requirements Inher, Wheel Services Services » “Security services may be Mm. ”; Aula, Reception, Office Support and Guardian Services”; “Safety and Awakening Services”; “Supporting of Safety and Awakening”; “Local or Circulating Guards”; “Safetytarkastus”; “Safety Checks”; “Asssistant Doctors Can Be Mm