Cleaning Tenders

Details: Maintenance of the sanitation network and associated structures, maintenance of surveillance systems and maintenance and operation of the storage basin-Place des Fêtes in Bezons The purpose of this framework agreement for purchase order is the maintenance and operation of the Networks And Sanitation Works And Measuring Points. The Services To Be Carried Out Are Within The Framework Of Surveillance Operations, Cleaning, Maintenance, Cleaning, Television Inspections, Maintenance Visits Of Networks And Sabs works, with the main objective of guaranteeing the continuity of the public sanitation service. The entire heritage to be maintained is described in the Cctp.

Purchaser Name: Management Of Poble Net Municipal Cleaning And Maintenance Services SL | Supply through Renting of a Two-compartment Collection Truck with Compaction and Rear Loading for the Mercantil Poble Net Serveis Municipals de Neteja I Manteniment, Sl.

Details: Description Supply And Delivery Of The Following Various Hardware And Construction Materials: 70.00 Bags Portland Cement 30.00 Pcs. 12mmø, Rsb (grade 40) 30.00 Kgs. G.i. Tie Wire, #16 30.00 Pcs. Metal Abrasive Flat Cutting-off Wheel, 14” 20.00 Pcs. 1/4" Thk. Ordinary Plywood 5.00 Kg. Nylon 0.90mm 10.00 Pcs. G.i. Pipe, 2"ø (no Thread) 10.00 Pcs. Scaffolding Clamp, Swivel Type 10.00 Pcs. Scaffolding Clamp, Fixed Type 2.00 Set Spanner Scaffolding Ratchet Wrench 6.00 Pcs. Catwalk For Scaffoldings 2.00 Pcs. Cross Cut Hand Saw 3.00 Pcs. Circulaw Saw Blade For Wood, (7 1/4" X 40t) 1.00 Pcs. Claw Hammer Wooden Handle 2.00 Pcs. Aluminum Magnetic Level Bar 20.00 Grit Sanding Paper, #80 20.00 Grit Sanding Paper, #100 2.00 Set Bluetorch Gun 10.00 Can Bluetorch Butane 2.00 Pcs. Pull - Push Rule, 5m 2.00 Pcs. 90 Degrees Diamond L Shape Square Ruler 2.00 Pcs. Plastering Trowel 2.00 Pcs. Heavy Duty Gun Tacker 5.00 Box Gun Tacker Staple 5.00 Set Router Bit Set 6 Pieces 2.00 Box 1", Cwn 2.00 Box 1 1/2", Cwn 2.00 Box 2", Cwn 2.00 Box 2 1/2", Cwn 2.00 Box 3", Cwn 2.00 Box 4", Cwn 5.00 Pcs. Pvc Pipe, 2"ø X 3m (series 1000) 5.00 Pcs. Pvc Pipe, 4"ø X 3m (series 1000) 10.00 Pcs. Pvc Orange Elbow, 2"ø X 90º 10.00 Pcs. Pvc Orange Elbow, 4"ø X 45º 10.00 Pcs. Pvc Orange Elbow, 4"ø X 90º 10.00 Pcs. Pvc Orange Tee, 2"ø 10.00 Pcs. Pvc Orange Tee, 4"ø 10.00 Pcs. Pvc Orange Wye, 2"ø 10.00 Pcs. Pvc Orange Wye, 4"ø 10.00 Pcs. Pvc Orange P-trap, 2"ø 10.00 Pcs. Pvc Orange Coupling Reducer, 4"ø X 2"ø 10.00 Pcs. Pvc Orange Coupling Reducer, 3"ø X 2"ø 10.00 Pcs. Pvc Orange Tee Reducer, 4"ø X 2"ø 10.00 Pcs. Pvc Orange Wye Reducer, 4"ø X 2"ø 10.00 Pcs. Pvc Orange Clean Out Set, 2"ø 10.00 Pcs. Pvc Orange Clean Out Set, 4"ø 20.00 Pcs. Pipe Dredging Agent Dissolve Blockage Toilet Sink, 1l 1.00 Pcs. Heavy Duty Adjustable Wrench, 24" 1.00 Pcs. Heavy Duty Adjustable Wrench, 42" 42.00 Can Pvc Solvent Cement W/ Brush, 200cc 20.00 Pcs. Pvc Pipe (blue), 1/2"ø X 3m 30.00 Pcs. Pvc Coupling (blue), 1/2"ø 50.00 Pcs. Pvc Elbow (blue), 1/2"ø X 90º 30.00 Pcs. Pvc Tee (blue), 1/2"ø X 90º 30.00 Pcs. Pvc Threaded Elbow (blue), 1/2"ø 30.00 Pcs. Pvc Threaded Tee (blue), 1/2"ø 30.00 Pcs. Pvc Female Adapter (blue), 1/2"ø 30.00 Pcs. Pvc Male Adapter (blue), 1/2"ø 20.00 Pcs. Pvc End Cap (blue), 1/2"ø 20.00 Pcs. Compression Coupling, 1/2"ø 20.00 Pcs. Compression Tee, 1/2"ø 10.00 Pcs. Heavy Duty Jet Valve, 1/2"ø 10.00 Pcs. Heavy Duty Gate Valve, 1/2"ø 10.00 Pcs. Heavy Duty Jet Valve, 3/4"ø 10.00 Pcs. Heavy Duty Gate Valve, 3/4"ø 50.00 Pcs. Stainless Faucet 27.00 Set Bilster Pack Lever Type Toilet Water Tank Fittings 17.00 Set Stainless Steel Bidet 17.00 Pcs. Stainless Flexible Hose, 1/2" 17.00 Pcs. Stainless Steel Two Way Angle Valve, 1/2" 45.00 Pcs. Teflon Tape, 3/4" X 10m 2.00 Pcs. Chisel, 3/4" 2.00 Pcs. Chisel, 1 3/4" 6.00 Box 1/8 X 1/2 Blind Rivets, 100 Pieces 5.00 Box 5/32 X 1/2 Blind Rivets, 100 Pieces 5.00 Box 3/16 X 1/2 Blind Rivets, 100 Pieces 5.00 Box 1/8 X 3/4 Blind Rivets, 100 Pieces 5.00 Box 5/32 X 3/4 Blind Rivets, 100 Pieces 6.00 Box 3/16 X 3/4 Blind Rivets, 100 Pieces 10.00 Pcs. 4.5mm Fiber Cement Board 33.00 Pcs. Metal Stud, 25mm X 52mm, 0.50mm Thk. X 3m 11.00 Pcs. Carrying Channel, 12mm X 38mm, 0.50mm Thk. X 5m 29.00 Pcs. Hanger Bars / Rod, 12mm X 38mm, 0.50mm Thk. X 5m 173.00 Pcs. Metal Furring Clip Or W - Clip 7.00 Pcs. Wall Angle, 25mm X 25mm, 0.40mm Thk. X 3m 116.00 Pcs. 1" Metal Screw 2.00 Pcs. Chisel, 1" 2.00 Pcs. Chisel, 2" 5.00 Set Heavy Duty Aluminum Glass Door Lock 36.00 Set Heavy Duty Door Knob 10.00 Pcs. Heavy Duty Padlock (big) 5.00 Set Heavy Duty Hole Saw Door Knob Lock Installation Kit 10.00 Pcs. Acetic Cure Silicone Sealant (clear) 10.00 Pcs. Valley Gutter 3.00 Box Tekscrew, 2" Metal 5.00 Pcs. 1/8" Drill Bits (black) For Metal 2.00 Pcs. High Grade Waterproofing Roof Sealant - 4l 9.00 Pcs. Pre-painted Metal Sheets (13' Long X 0.50mm Thk.), Rib Type - Green 360.00 Pcs. Wood Tekscrew, 1 1/2" 5.00 Pcs. Transparent Googles (safety Googles) 40.00 Pcs. Dust Mask 50.00 Pairs Cottonpoly Construction Gloves, Coated With Red Orange Latex Rubber Palm Coating 5.00 Pairs Heavy Duty Welding Protective Equipment Gloves (leather) 5.00 Pairs Welding Gloves 30.00 Pcs. Safety Cotton Polo Shirt 30.00 Pcs. Safety Cotton Long Sleeves W/ Collar 10.00 Set Rotary Hammer Drill Bit 5 Pieces (6mm, 6mm, 8mm, 10mm, 12mm) 3.00 Pail Gloss Latex (light Apple Green) 6.00 Pail Gloss Latex (yellow) 3.00 Pail Gloss Latex (white) 2.00 Gal Rubberized Paint (white) 2.00 Gal Rubberized Paint (yellow) 5.00 Gal Rubberized Paint (gray) 3.00 Gal Rubberized Paint (green) 4.00 Gal Acreex Reducer 52.00 Pcs. Paint Roller, 9" W/ Pan 52.00 Pcs. Paint Roller, 7" W/ Pan 42.00 Pcs. Baby Roller, 4" 60.00 Pcs. Paint Brush, 2" 10.00 Gal Laquer Thinner 7.00 Gal. Glazing Putty 4.00 Pail Flatwall Enamel (white) 10.00 Gal. Red Oxide Primer 5.00 Pail Enamel Paint (light Apple Green) 15.00 Pcs. Paint Brush, 4" 15.00 Pcs. Paint Brush, 1" 585.00 Pcs. Chb, 4" 30.00 Pcs. Tubular Bar G.i., 1" X 2" X 1.2mm 65.00 Pcs. Tubular Bar G.i., 2" X 3" X 1.2mm 20.00 Pcs. Flat Bar G.i., 1" X 3mm Thk. 2.00 Set 10m Welding Cable With Electrode Holder And Connector And With Variants 75.00 Kgs High Quality Welding Electrodes 20.00 Pcs. Wd - 40, 330 Ml 120.00 Pcs. 4-inch Cutting Disc For Metal 13.00 Pcs. G.i. Pipe, 4" (sch. 40) 50.00 Pcs. Angle Bar, 2" X 2" 50.00 Pcs. Angle Bar, 1.5" X 1.5" 10.00 Pcs. 2" X 3" X 1.50mm Thk Tubular Bar G.i. 3.00 Pcs. 2" X 4" X 1.50mm Thk Tubular Bar G.i. 4.00 Pcs. 2" X 6" X 1.50mm Thk Tubular Bar G.i. 2.00 Set Heavy Duty Fliers 2.00 Pcs. Heavy Duty Flat Screw 2.00 Pcs. Heavy Duty Phillip Screw 1.00 Set Heavy Duty Fiberglass Multi-purpose Folding Ladder, 12ft 5.00 Set Black Oxide Coated Drill Bit Set (black &gold), 14 Pieces - For Metal 5.00 Set Black Oxide Coated Drill Bit Set (black &gold), 14 Pieces - For Concrete 35.00 Pc. Led Bulb, 23 Watts 30.00 Pcs. 1/2"ø X 3m Pvc Pipe 33.00 Pcs. Junction Box 3.00 Box 2.0 Mm² Thhn Copper Wire 5.00 Box 3.5 Mm² Thhn Copper Wire 2.00 Box 5.5 Mm² Thhn Copper Wire 44.00 Pcs. Receptacle With Cover, 2" 44.00 Pcs. Led Bulb, 12 Watts 5.00 Can Pvc Solvent Cement 400ml 10.00 Pcs. Electrical Tape, Big 22.00 Pcs. Bolt, 1" 2.00 Set Extension Cable Reel Drum, 25m

Details: Description 1 1012 Piece Ballpen, Black 2 60 Piece Ballpen, Blue 3 47 Piece Ballpen, Red 4 100 Piece Certificate Holder, Letter Size, Plastic 5 2 Piece Clip Board, Long 6 2 Book Columnar Notebook, 14 Columns 7 5 Piece Correction, Fluid Pen 8 5 Ribbon Correctible Ribbon Tape For Electric Olympia Typewriter 9 1 Set Cover, Book Binding, A4,5's 10 3 Set Cover, Book Binding, Long 11 5 Set Cover, Book Binding, A4, White 12 15 Set Cover, Book Binding, Long, White 13 5 Set Cover, Book Binding, A4, Dark Green 14 15 Set Cover, Book Binding, Long, Dark Green 15 5 Set Cover, Book Binding, A4, Sky Blue 16 15 Set Cover, Book Binding, Long, Sky Blue 17 5 Set Cover, Book Binding, A4, Yellow 18 15 Set Cover, Book Binding, Long, Yellow 19 5 Set Cover, Book Binding, A4, Dark Brown 20 15 Set Cover, Book Binding, Long, Dark Brown 21 5 Set Cover, Book Binding, A4, Orange 22 15 Set Cover, Book Binding, Long, Orange 23 5 Set Cover, Book Binding, Long, Red 24 4 Pack Daily Time Record, Paper (500's) 25 50 Piece Dvd Rewritable With Individual Casing 26 3 Piece Desk Tray Steel In And Out 27 2 Box Envelope, Pay, 500 Pieces Per Box 28 5 Box Envelope, Mailing Size : Short 29 18 Box Fastener, Plastic, 70mm Between Prongs, 50 Sets Per Box 30 75 Piece Folder, Pressboard, Short 31 7 Piece Magazine File Box, Large 32 70 Piece Manila Paper 33 1 Piece Notepad, Stick-on, 0.5 X 1.75 Inches, 100 Sheets Per Color 34 11 Piece Paper Catch, Finger Moistener ( Paste ) 35 4 Jar Paste, 200 Gsm 36 12 Piece Pencil Lead With Eraser 37 5 Piece Philippine National Flag, 4x8 All Cotton 38 43 Pack Photo Paper, Glossy, A4 10 Pieces Per Pack 39 2 Roll Plastic Cover Gauge 2.6 40 9 Case Push Pin, 100 Pieces Per Case 41 9 Piece Record Book, 150 Pages 42 4 Ribbon Ribbon, For Electric Typewriter, Olympia 43 3 Ribbon Ribbon,for Adding Machine 44 12 Piece Ring Binder, Plastic, 25mm 45 10 Piece Ring Binder, Plastic, 32mm 46 10 Piece Ring Binder, Plastic, 50mm (2") 47 5 Piece Ring Binder, Plastic, 1" 48 5 Piece Ring Binder, Plastic, 1/2" 49 6 Box Rubber Band, 70mm Round Length ,350grams 50 156 Piece Shoestring Colored ( Round ) 1m Long 51 68 Piece Sign Pen, Black, 0.7mm 52 3 Piece Sign Pen, Blue, 0.7mm 53 10 Piece Sign Pen, Parker Refill 0.7 Blue 54 102 Piece Sign Pen, Black, Ordinary 55 64 Piece Sign Pen, Blue, Ordinary 56 6 Piece Sign Pen, Red, Ordinary 57 6 Piece Sign Pen, Green, Ordinary 58 136 Piece Sign Pen, Black, 0.8mm 59 2 Piece Sign Pen, Blue, 0.8mm 60 10 Piece Sign Pen, Black, 1.0mm 61 1 Piece Self Inking Stamp: " Certified True Copy W/ Date " 62 1 Piece Self Inking Stamp: " Original Signed Copy " 63 1 Piece Self Inking Stamp: " Received " 64 68 Pack Specialty Board, White, Short 10's 65 1 Piece Stamp Pad Felt, #1, 5.31" X 3.54" 66 59 Pack Sticker Paper, A4 Glossy 10's 67 2 Piece Storage Box Card, With Lid 28cm W X 39cm L X 28cm H 68 6 Pad Notepad Stick On, 0.5x1.75 Inches, 5 Colors, (100 Sheets Per Color) 69 2 Pad Sticky Note, Index Tab, Sign Here, 5 Colors, (20 Sheets Per Color) 70 20 Roll Tape, For Adding Machine 71 46 Roll Tape, Double Sided, Width: 24mm 72 5 Roll Tape, Duct, 48mm 73 5 Roll Tape, Transparent, Width: 12mm 74 19 Cart Ink Cart, Brother Btd60, Black 75 14 Cart Ink Cart, Brother Bt5000, Cyan 76 14 Cart Ink Cart, Brother Bt5000, Magenta 77 14 Cart Ink Cart, Brother Bt5000, Yellow 78 9 Cart Ink Cart, Canon Gi 790, Black 79 2 Cart Ink Cart, Canon Gi 790, Cyan 80 2 Cart Ink Cart, Canon Gi 790, Magenta 81 2 Cart Ink Cart, Canon Gi 790, Yellow 82 8 Cart Ink Cart, Canon Pg-47 83 8 Cart Ink Cart, Canon Cl-47 84 4 Cart Ink Cart, Epson, Pigmented, 774 Black 85 5 Cart Ink Cart, Epson 008, Black 86 1 Liter Ink, Refill Universal Black 87 1 Bottle Ink, Refill Universal Cyan 88 1 Bottle Ink, Refill Universal Magenta 89 1 Bottle Ink, Refill Universal Yellow 90 80 Can Air Freshener, Gel 70g 91 6 Piece Battery D (megaphone) 92 21 Liter Bleaching Solution, 1l 93 52 Gallon Bleaching Solution, 1 Gallon 94 17 Piece Broom Stick With Handle 95 108 Pouch Detergent Powder, All Purpose, 500 Grams 96 230 Bottle Dish Washing Liquid 250ml 97 18 Piece Dishwashing Sponge 98 8 Gallon Disinfectant Solution, Concentrate 99 9 Piece Dipper 100 125 Sachet Fabric Softener, Antibac 27ml 101 20 Box Facemask, 50's 102 25 Bundle Garbage Bag, Medium, Black (100's) 103 20 Bundle Garbage Bag, Medium, Green (100's) 104 20 Bundle Garbage Bag, Medium, Yellow (100's) 105 27 Bundle Garbage Bag, Xl, Black (100's) 106 45 Bottle Glass Cleaner, 500ml 107 890 Pair Gloves Rubber, N548 108 3 Box Gloves Surgical #8 109 45 Piece Dust Pan Heavy Duty 110 70 Piece Hand Towel 111 2 Bottle Liquid Plumber 250ml 112 9 Piece Mophandle 113 4 Piece Mophead, Made Of Rayon, Weight: 400grams Min 114 3 Piece Mophead, Tornado, Zt11 115 2 Piece Mophead For New Tornado Mop 116 22 Bottle Muriatic Acid, 500ml 117 3 Piece Pail, Ordinary 118 61 Roll Plastic Bag, Transparent 25 Pcs Per Roll 16" X 24" 119 1 Piece Plunger 120 7 Piece Push Brush 121 80 Piece Sack, 50kilos 122 1750 Piece Sack, Used But Clean ( 50kls ) 123 29 Piece Scouring Pad With Foam 100mm X 75mm X 30mm 124 2 Piece Scrub Brush With Handle 125 50 Piece Soap, Bathroom, 90 Grams 126 8 Piece Toilet Bowl Brush 127 27 Piece Toilet Deodorant Cake 50g 128 1 Piece Tornado Mop 129 112 Piece Toilet Deodorant Cake 100g 130 30 Piece Tonner Bag, 40"w X 80"l 131 4 Piece Trashcan With Cover, Medium 132 270 Piece Folder, Pressboard, Long 133 19 Jar Glue, All Purpose, Gross Weight: 200 Grams Min 134 154 Piece Marker, Permanent, Black 135 7 Piece Marker, Permanent, Blue 136 5 Piece Marker, Permanent, Red 137 61 Piece Marker, Whiteboard, Black 138 3 Piece Marker, Whiteboard, Blue 139 3 Piece Marker, Whiteboard, Red 140 53 Pad Notepad, Stick-on, 2x3, 100 Sheets Per Pad 141 133 Pad Notepad, Stick-on, 3x3, 100 Sheets Per Pad 142 40 Pad Notepad, Stick-on, 3x4, 100 Sheets Per Pad 143 10 Box Rubber Band, 70mm Min Lay Flat Length (#18) 144 78 Piece Sign Pen, Black, Liquid/gel Ink, 0.5mm Needle Tip 145 59 Piece Sign Pen, Blue, Liquid/gel Ink, 0.5mm Needle Tip 146 34 Piece Sign Pen, Red, Liquid/gel Ink, 0.5mm Needle Tip 147 6 Piece Stamp Pad, Felt, Bed Dimension: 60mm X 100mm 148 18 Roll Tape, Packaging, Width: 48mm (±1mm) 149 38 Cart Ink Cart, Epson C13t6664100 (t6641), Black 150 17 Cart Ink Cart, Epson C13t664200 (t6642), Cyan 151 17 Cart Ink Cart, Epson C13t664300 (t6643), Magenta 152 17 Cart Ink Cart, Epson C13t664400 (t6644), Yellow 153 15 Ribbon Ribbon Cart, Epson C13s015632, Black, Forlx-310 154 41 Piece Battery, Dry Cell, Aa 155 39 Piece Battery, Dry Cell, Aaa 156 38 Piece Cleanser, Scouring Powder 350g Min./can 157 2 Pouch Detergent Powder, All Purpose 1kg 158 49 Can Insecticide, Aerosol Type, Net Content: 600ml Min 159 10 Cart Ink Cart, Epson 003, Black 160 5 Cart Ink Cart, Epson 003, Cyan 161 5 Cart Ink Cart, Epson 003, Magenta 162 5 Cart Ink Cart, Epson 003, Yellow

Details: Description Gov. Celestino Gallares Multi-specialty Medical Center Invitation To Bid For Supply, Delivery, Installation, Testing And Commissioning Of 4 Lots Various Medical Equipment (batch 1) For Gov. Celestino Gallares Multi-specialty Medical Center 1. The Gov. Celestino Gallares Multi-specialty Medical Center (gcgmsmc), Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Thirty-five Million Three Hundred Fifty-five Thousand Pesos Only (php35,355,000.00) Being The Abc To Payments Under The Contract For Cb-2024-10-0003. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Gcgmsmc, Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Thirty-five Million Three Hundred Fifty-five Thousand Pesos Only (php35,355,000.00) Being The Abc To Payments Under The Contract For Each Lot/item.et Al. Lot No. Item/description Quantity Unit Cost Total Cost 1 Body Box+spirometry 1 7,000,000.00 7,000,000.00 2 Multi-channel Digital Holter 1 3,000,000.00 3,000,000.00 3 Various Laboratory Equipment 1 5,355,000.00 5,355,000.00 4 Thoracic Multidisciplinary Tower, Surgery 1 20,000,000.00 20,000,000.00 Grand Total 35,355,000.00 Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Gcgmsmc, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Gcgmsmc Through Electronic Mail Via Procurement@cpspecialtycenter.org Or Through The Cellular Number 09209437250. 5. A Complete Set Of Bidding Documents May Be Acquired And Downloaded By Interested Bidders From Gcgmsmc Google Drive From (procurement@cpspecialtycenter.org) On October 30- November 19, 2024 And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Indicated Below In Accordance With The Following Schedule: Lot No. Item/description Total Cost Bidding Documents Fee (in Philippine Peso) 1 Body Box+spirometry 7,000,000.00 10,000.00 2 Multi-channel Digital Holter 3,000,000.00 5,000.00 3 Various Laboratory Equipment 5,355,000.00 10,000.00 4 Thoracic Multidisciplinary Tower, Surgery 20,000,000.00 25,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Online Banking Or Online Deposit With The Following Bank Details: Bank Name: Development Bank Of The Philippines Account Name: Gcg Multi-specialty Medical Complex Account Number: 00-0-15490-780-5 For Bidders Choosing To Pay Via Online Transfer Or Bank Deposit, Please Ensure That Proof Of Your Successful Transaction Is Promptly Sent To The Procurement Email Address: Procurement@cpspecialtycenter.org. In Compliance With Coa Circular Number 2021-014, Clause 5.2, An Acknowledgement Receipt Will Be Issued As Proof Of Verified And Received Payment. Access To Bidding Documents Will Be Granted Only Upon Presentation Of This Acknowledgement Receipt. 6. The Gcgmsmc Will Hold A Pre-bid Conference On The 7th Day Of November 2024 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur, Cortes, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission On Or Before The 19th Day Of November 2024 At 0900h At Gcgmsmc Procurement Office Room 3c-w327 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur, Cortes, Bohol Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On The 19th Day Of November 2024 At 0900h At Room 3c-e310 At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes. Bids Will Be Opened In The Presence Of The Bidders’ Authorized Representatives Together With Their Company Id. 10. The Gcgmsmc Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Mary Grace L. Simbajon Procurement Office Malayo Sur, Cortes, Bohol Procurement@cpspecialtycenter.org +639209437250 Jessa O. Quiñal Procurement Office Malayo Sur, Cortes, Bohol Procurement@cpspecialtycenter.org +639452478632 October 28, 2024 Approved By, (signed) Doreen A. Lugo, Lpt Bac Chairperson Noted By, (signed) Laurence Elliot R. Tirol, Md, Fpcp Medical Center Chief I Head Of Procuring Entity .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 1 Unit: Lot Qty: 1 Unit Cost: 7,000,000.00 Total Cost: 7,000,000.00 Description: Body Box+spirometry Measurement (specific) Airway Resistance: Reff, Srtot, Sr0.5, Srmid As Well Asreff, Rtot, R0.5, And Rmid Static Lung Volumes: >absolute Lung Volumes: Tlc, Frcpleth, Rv, Rv/tlc And Others; >static Lung Volumes: Vc Max, Ic, Erv And Others Dynamic Lung Volumes: Fvc, Fev1, Fev1/fvc, Mfef 25-75, Fef 75, Pef And Others Dlco: Co Diffusion Real Time (rt) And Intra Breath (ib) Additional Software's: - Mip/mep - Bronchial Challenge Components Airtight Box With Panorama Glazing,integrated Control Units And New Digital Ambient Pressure Compensation Circuit Calibration-free And Waterproof Ultrasonic Flow Sensor At Least 1000-1120 Liters Internal Volume (body Box) Pc With Hygiene Keyboard/mouse, Inkjet Printer, And 24° Lcd Flatscree Monitor On An Ergonomic, Smooth-running Trolley Complete Software Package For Measurement And Report Generation Plus Extended Infrastructure For Data Management Flow Measurement Type: Ultrasound Methodological Peculiarities: Simultaneous Measurement Of Ultrasound Transit Time In And Against Flow Direction Sample Rate: True 1000 Hz For Flow, Achieved By 2000 Ultrasound Transit Time Measurements Range: 0 To 18 L / S Bidirectional Accuracy: Exhalation 0 To 14 L / S: 1.5 % Or 0.05 L / S ; Inhalation 0 To 14 L/s: 2.0 % Or 0.05 L/s Precision: At Least 1% Or 0.1 L / S Resolution: At Least 1ml/s Total Resistance: <0.150 Kpa *s/l At 14 L/s Dead Space Ultrasonic Sensor (uss) Module: 66 Ml Volume Integration Principle: Software Volume Integration Of Flow Signal (ultrasound) Range: At Least 30 L Accuracy: Exhalation And Inhalation 0.5 To 14l/s Precision: At Least 0.05 L Resolution: At Least 1 Ml Mouth Pressure Measurement Type: Piezo Resistive Or It's Equivalent Range: ± 18 To ±30 Kpa Accuracy: ± 1 % Or 0.01 Kpa (0.075 Mmhg) Resolution: At Least 0.003 Kpa (0.0225 Mmhg) Box Signal Transducer Type: Piezo Resistive, Calibrated In Terms Of Shift Volume Or It's Equivalent Transducer Range: 0 To ± 2500 Ml At 1000 Hpa Ambient Pressure Accuracy: At Least ± 2 % At 0.25 Hz / 0.5 Hz Compensation Of Ambient Pressure Variations: Digital Ambient Pressure Compensation Or It's Equivalent Box Material: Aluminium /glass Construction Principle: Volume-constant Volume: At Least 1110 L Height Step-in: At Least 2- 6 Inches Weight: At Least 175 Kg (385 Lbs), At Least 150 Kg (330 Lbs) Without Door Door-lock: Electromagnetic Via At Least 8 Magnets; Stable Hand Grip: With Safety Stable Hand Grip Must Be On The Side Of The Box Upon Entry For Safety Of The Patient Size Outside: (at Least 932mm L) X (at Least 80 Mm W) X (at Least 1,850 Mm W) ; Including Door Handle Interface To Pc: Usb Box Calibration Syringe Calibration Volume: At Least 50 Ml, Motor-driven Calibration Pump Calibration Frequency: 0.25 Hz, 0.5 Hz, And 1 Hz Bench Maximal Load Bench: At Least 250 Kg (551 Lbs) Sitting Height: At Least 47.6 Cm (18.7") Sitting Area: At Least (50.6 Cm W) X At Least ( 33.0cm D), ( 19.9"x 13.0") Flexible 3d Arm Can Be Extended Outside Of The Cabin Up To An Impressive Reach : At Least 63 Centimeters (cm) Adjustable Height Inside Cabin: 98.3 Cm To 141.5 Cm Work Station Dimensions: (at Least 61 Cm W) X (at Least 62 Cm D) X (at Least 120 Cm H); ( 24"x24.4"x47.3") Weigh Total: Atleast 45 Kilogram (kg) Inclusion Of Pc, Printer And Lcd Monitor. Pc: 12th Generation Intel Core I5-10400t 35 W 6 12 2.0 Ghz To 3.6 Ghz 12 Mb Intel Uhd Graphics 630. Height: Front Height At Least 182.00mm (7.16 Inches) ; Rear Height Atleast 182 Mm ( 7.16 Inches); Width: At Least 178.50mm (7.02inches); Depth: At Least 36.00 Mm ( 1.42 In); Weight At Least 1.17 Kg ( 2.58 Lb). Monitor: Diagonal Viewing Size 604.70 Mm (at Least 23.8 Inches) Printer Iso Speeds: Up To 18 Ppm Black, Up To 10 Ppm Color Display: Button And Led Control Panel Standard Connectivity: 1 Usb 2.0; 1 Ethernet; 1 Wireless 802.11b/g/n Paper Handling: 225-sheet Input Tray; 60-sheet Output Tray Duty Cycle: Up To 15,000 Pages Borderless: Yes, Up To 8.5 X 11 In (us Letter), 210 X 297 Mm(a4); Ink: Yellow 935 Xl , Cyan 935 Xl, Magenta 935 Xl, And Black 934 Xl At Least Four (4) Swivel Castor , Lockable At Least One (1) Shelf One (1) Webcam One (1) Microphone Keyboard Drawer With Mousepad (left/right): Keyboard Platform Area (at Least 40cm W) X (at Least 20 Cm D) (15.7" X 7.9"); Load Capacity At Least 3(kg) ( 6.6llbs) Distributed Load; Mouse Pad Can Be Extended From Left To Right And Vice Versa. Drawer: Interior Area: (34 Cm W) X (24 Cm D) X ( 8cm H) (13.4 "x 9.4" X 3.1") ; Platform Area: 45 Cm W X 36 Cm D ( 17.7 X 14.2") ; Load Capacity Shelf: At Least 15 Kg (33lbs) Distributed Load ; Load Capacity Drawer: At Least 3 Kg ( 6.6 Lbs) Distributed Load. Monitor Mount: Load Capacity At Least 14 Kg ( 30.9 Lbs) Electrical Safety: Protection Class I Diffusion Measurement Type: Infrared Range: 0 To 0.33 Vol % Accuracy: At Least ± 0.003 Vol % Or ± 2 % Relative Resolution: At Least 0.0005 Vol % Response Time: ≤ 145 Ms Pressure Reducer For Demand Valve Inlet Pressure: At Least 200 Bar Outlet Pressure: At Least 7 Bar Flow Rate: At Least 500 L/min, At Most 700 L/min Ambient Measurement Temperature Sensor : Measurement Range: – 10 To 50 °c (14 To 122 °f) ; Accuracy: ± 0.5 °c At 20 °c (68 °f) ± 1 °c At 10 To 34 °c (50 To 93.2 °f) Humidity Sensor : Measurement Range: 0 To 100 % Relative Humidity ; Accuracy: 4 % Relative Humidity At 20 – 80 % Relative Humidity Air Pressure Sensor: Measurement Range: 500 To 1100 Hpa (375 To 825 Mmhg); Accuracy: ± 2.5 Hpa (1.88 Mmhg) At 700 To 1060 Hpa (525 To 795 Mmhg) Ambient Conditions Temperature: + 10 °c To + 34 °c (+ 50 °f To 93.2 °f) Relative Humidity: 20 To 80 % Rh, Non-condensing Ambient Pressure: 700 To 1060 Hpa (525 To 795 Mmhg) Transport And Storage Conditions Temperature: – 20 °c To + 50 °c (– 4 °f To 122 °f) Relative Humidity: 15 To 95 % Rh, Non-condensing Ambient Pressure: 600 To 1200 Hpa (450 To 900 Mmhg) Power Supply (cabin) Mains Voltage: 100 To 240 V, Ac 50 To 60 Hz Power Input: Max. 80 Va Electrical Safety: Protection Class I Moisture Protection At Least Ip 20 Operating Mode Complete System: Continuous Operation Measurement Programs Body Plethysmography Forced Spirometry (fvc) / Slow Spirometry (svc) / Mvv Spirometry Animation Programs Single-breath Co-diffusion Realtime And Intrabreath Bronchial Challenge Calibration Program Volume Calibration Gas Calibration Body Box Calibration Organization Programs Patient Data Report Output Inclusive Multiformat Output Must Be But Not Limited To Pdf, Jpg, Tiff, And Rtf. Auto Interpretation Ats/ers Quality Check Comments / Physician Interpretation Report Designer For Generating Customized Reports Predicted Values / Reference Sets Design / Editor Offline Data Input Backup / Restore Data Export / Import User Parameter Editor For Customized Parameters Patient Data Management For Advanced Corrective Actions ; Questionnaire Designer For Customized Questionnaires Gdt Connection Spirometer Data Transfer ( Microloop, Microlab, Flowscreen, Spiropro) Security And User Administration Accessories At Least Two Hundred Fifty (250) Pieces Disposable Filter And At Least 250 Pieces Noseclip. One (1) Unit Of Uninterruptible Power Supply (ups) 2 Kva For Printer, Monitor And Pc. One (1) Unit Of Uninterruptible Power Supply (ups) 2 Kva For Body Box. Two (2) Units Of Automatic Voltage Regulator (avr) 2 Kva. Set Of Ink: (1) Pack 935 Xl Yellow; (1) Pack 935 Xl Cyan; (1) Pack 935 Xl Magenta, And (1) Pack 934 Xl Black. With At Least ( One) 1 50 Lbs/ 22.68 Kg Dlco Gas & Two (2) Gauges. Particulars Vendor Shall Warrant That The Product Supplied Shall Equal The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On The System/equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Shall Provide Certificate Of Parts Availability For 10 Years In The Market. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair The System During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Vendor Must Conduct Quarterly Preventive Maintenance Program And Provide Preventive Maintenance Report Within The Warranty Period. Vendor Agrees To Add Equipment Down-time (in Number Of Days) To Total Warranty Period. Vendor Must Respond With Technical Support Staff Response Time Within At Least 2 Hours Via Remote Access Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; And Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user. System/equipment Shall Be Delivered With At Least Three (3) Copies Of All Service Manuals And At Least Three (3) Copy Of All User Manuals. System/equipment Shall Be Delivered Complete With All Cabling, Connectors, Junction Boxes, Mounting Hardware, And All Other Accessories Necessary For Full Operation Of The System/equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Any And All Software Necessary To Technically Support The System Shall Be Included. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Devices Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period Vendor Shall Agree To Provide Factory Or Principal Manufacturer Technical Training With Certificate For At Least Two (2) In-house Biomedical Technologist Or Engineer And/ Or Two (2) To Three (3) Respiratory Therapist's With Free Of Charge. Vendor Shall Conduct Annual Calibration And Provide Calibration Certificate Within Warranty Period. Vendor Shall Provide Comprehensive Training Of Users In Operation, Basic And Advance Maintenance Shall Be Provided. Vendor Shall Provide Routine Software And/ Or Hardware Upgrade. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For Major Spare Part/s. Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s, Training And Other Sundries Necessary For The Complete Installation Of The Body Box + Spirometry. Vendor Must Have Available Technical Staff And/or Office/s Within Visayas. Manufacturer Should Have An Exisiting Or Active Iso Certification En Iso 13485:2016 Or Its Equivalent For Quality Standard. Vendor Shall Have The Availability Of Stock For Dlco Gas And/ Or Assist The End User To Purchase Dlco Gas From Another Vendor Of Dlco Gas. Principal’s / Manufacturer’s Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 2 Unit: Lot Qty: 2 Unit Cost: 1,500,000.00 Total Cost: 3,000,000.00 Description: Multi-channel Digital Holter Holter Recorder/s. Multi-channel, Digital Ecg Channels: 2 Channels; 3 Channels Lead-wire Cable: At Least 7 Lead-wire Recording Time: At Least 24 Hours Light Emitting Diode/s: Event Button Status Indicator Led; Hookup Guidance Led Demographic Data Entry & Hookup Preview: Pc Application Via Bluetooth Communication And/or Mobile Application Via Bluetooth Communication; Data Download And Transfer: Usb 2.0 High Speed Cable; Memory: Non-removable Digital Memory Power Requirements: Hr03/aaa Nimh Rechargeable Battery With Charger; At Least 4 Ports With Extra 16 Pieces Rechargeable Aaa Battery With Two Charger Weight: Up To 53 Grams Dimensions: At Least 71x64x20 Millimeter/s Frequency Response 0.05 Hertz To 70 Hertz Sampling Rate: 256 Sps With 12-bit Resolution Input Voltage Range Ecg: ± 6 Mv Input Impedance >10 M Compatibility With Mobile Application And Pc Application Ingress Protection Rating: Ip43 Auto Start Feature Signal Quality Guidance Patient Data Is Automatically Deleted From Device After The Recording Starts To Ensure No Patient Data Is Left Behind And Ensure Patient Information Is Protected Supports Connection To Ecg Holter Management System For End-to-end Workflow Process From Orders To Final Report Storage By Fully Integrating To A Cardiology Information System Secure Log-in With Administrator Setup Account To Avoid Unauthorized Use Of Devices. Holter Electrocardiogram Management System, 1 System Customized Parameter Set/s Based On Patient Age Groups And Types For Faster Analysis Advanced Heart Rate Trend, Identifies Noise Regions Which Can Be Quickly Added/deleted For Cleaner Data And Spot Potential Atrial Fibrillation (af); Quick Scan: Two Button Workflow Speed Analysis; Prioritized Event Layout: Automatic Critical Events Display In A Separate Tab To Improve View/s Of Pvcs Support For Ecg Algorithm/s Such As Heart Arate Variability (hrv), Qt Measurement, St Segment Measurement; Heart Rate Turbulence (hrt) And/or T-wave Alternates (twa); Dedicated Mode/s For Atrial Fibrillation Cases: 7-day Holter Overview With Ability To Select 48*hour Period For Analyses; Automatic Detection Of Af Episodes; Automatic Sve Suppression During Af; Dedicated Mode/s For Pacemaker Patient/s: Automatically Identifies Pacemaker Type And Sets Parameters; Measures Pulse Width To Ensure Pacemaker Is Working Correctly; Shows Exit Blocks, Over- And Under- Sensing And Fusion Beats; Integrated Ecg Preview App Automation Processes To Streamline Orders And Report Generation And Minimize Manual Data Entry. Allows Satellite Sites To Download Holter Data, Edit Patient Demographics, Edit Patient Events, And Upload The Study For Analysis At A Central Location; Allows Access To Data From Any Workstation Via Floating Licenses Allows Immediate Access To Inpatient Holter Data From Beside Monitor/s And/ Or Telemetry, Allowing For Ecg Algorithms To Be Used In Risk Stratification; Integrated Workflow Minimizes Training Requirements; Security Administrator-controlled User Assigned Privileges Protect Data Security; Single Sign-on To Imply With Comply With Facility Standards For Username; Audit Logging To Facilitate Security Privacy And Regulatory Compliance; Tools To Help Ensure Compliance With Hipaa And Gdpr Standards Data Access To Patient Information Can Be Restricted By Site And Location; System Must Be Integrated With Facility Servers And Deployed Virtually To Simplify Implementation And Management; System Can Be Accessed Remotely By Service Engineers For Maintenance And Troubleshooting Particulars Vendor Shall Warrant That The Product Supplied Shall Equal The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On The System/equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labor Necessary To Repair The System During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Detective In Material Or Workmanship Under Normal Use. Vendor Shall Conduct Quarterly Calibration And Preventive Maintenance Program And Provide Preventive Maintenance Report Within The Warranty Period. Vendor Agrees To Add Equipment Down-time (in Number Of Days) To Total Warranty Period. Vendor Must Respond With A Technical Support Staff Response Time Within At Least 2 Hours Via Remote Access Or In Person Where Applicable, With At Least Twenty-four (24) Hours Upon Notification Of End User And Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End User. System/equipment Shall Be Delivered With At Least One (1) Copy Of All Service Manuals And At Least Two (2) Copies Of All User Manuals. System/equipment Shall Be Delivered Completely With All Cabling, Connectors, Junction Boxes, Mounting Hardware, And All Other Accessories Necessary For All Operation Of The System/equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Any And All Software Necessary To Technically Support The System Shall Be Included. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Devices Must Meet All Currently Applicable Safely Standards, Local And International Where Applicable. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period. Vendor Shall Agree To Provide Factory Or Principal Manufacturers, Trainings And/or Certification For At Least One (1) In-house Biomedical Technologist Or Engineer And End User. Vendor May Include Post-warranty Comprehensive Calibration And Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For Major Spare Part/s Vendor May Include Post-warranty Comprehensive Calibration And Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For All Spare Part/s Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s. Training And Other Sundries Necessary For The Complete Installation Of The Vendor Must Have Available Technical Staff And/or Office/s Within The Region Principal’s/ Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Progress Billing And Payment May Be Availed B The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 3 Unit: Lot Qty: 1 Unit Cost: 5,355,000.00 Total Cost: 5,355,000.00 Description: Supply, Delivery, Installation, Testing & Commissioning Of Various Laboratory Equipment Biological Refrigerator (single Door) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 25.2 Cu Ft. (390l) Cabinet Type, Upright Single Clear Glass Door Should Have At Least 7 Shelves (adjustable) Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At 2⁰ To 8⁰c Has Precise Temperature Control System Large Space And Superior Uniformity With Temperature Uniformity Of At Least ± 3⁰c Forced Air Cooling Type Self-closing Door Capable Of At Least 90⁰ Stay Open Feature With Security Lock Has Optimized System And Noise Reduction Design To Reduce Noise Level To About 43db(a) 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller System And Led Display Stable Performance And Should Have Multiple Functional Alarm Modes: Light, Sound And Remote; And With Six Alarm Types: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery And Door Ajar Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified Ul And Ce Standards Biological Refrigerator (double Door) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 31.4 Cu Ft. (890l) Cabinet Type, Upright Heated Double Pane Glass Door That Will Allow A Clear Display Of Stored Products Without Condensation At At Least 32⁰c And 85% Relative Humidity Condition Should Have At Least 12 Shelves (adjustable) Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At 2⁰ To 8⁰c Forced Air Cooling Type Automatic Defrost Mode Capable Self-closing Door Capable Of At Least 90⁰ Stay Open Feature Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Led Display Stable Performance And Should Have Multiple Functional Alarm Modes: Light, Sound And Remote; And With Six Alarm Types: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery And Door Ajar Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ul And Ce Standards Biological Refrigerator (single Door, Mini Refrigerator ) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 2.4 Cu Ft. (68l) Cabinet Type, Upright Single Clear Glass Door Should Have At Least 2 Shelves And 1 Drawer (adjustable) Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At 2⁰ To 8⁰c Forced Air Cooling Type Lockable Design Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Led Display Stable Performance And Should Have Multiple Functional Alarm Modes: Light, Sound And Remote; And With Six Alarm Types: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery And Door Ajar Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ul And Ce Standards Combined Refrigerator And Freezer High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 6.5 Cu Ft. (185l) For Refrigerator; At Least 3.4 Cu Ft. (97l) For Freezer Cabinet Type, Upright For Both, With Single Clear Glass Door For Refrigerator Should Have At Least 3 Shelves And 1 Drawer For Refrigerator; 1 Shelf And 2 Drawers For Freezer Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Has Two Frequency Conversion Compressor Variable Frequency Compressor With Optimized Cooling System Capable Of Automatic Defrost Mode For Refrigerator And Manual Defrosting For Freezer Temperature Range Should Be At 2⁰ To 8⁰c For Refrigerator; -10⁰ To -40⁰c For Freezer Forced Air Cooling Type For Refrigeration; Direct Cooling For Freezer Highly Precise Refrigerator Room Display For At Least 0.1⁰c Has Independent Control Panel Display For Refrigerator Section And Freezer Section Self-closing Door Capable Of At Least 90⁰ Stay Open Feature Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Led Display Stable Performance And Should Have Multiple Functional Alarm: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery, Door Ajar And High Ambient Temperature Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ce And/or Ul Standards Biomedical Freezer (plasma Freezer) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 9.3 Cu Ft. (262l) Cabinet Type, Upright Single Door Should Have At Least 7 Drawers Hydrocarbon, Cfc-free Refrigerant Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At -20⁰ To -40⁰c Direct Air Cooling Type Capable Of Manual Defrosting Low Energy Consumption Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Lcd Digital Temperature Display With At Least 0.1⁰c Precision Has A Standard Access Porthole For About 25mm Inside Diameter Stable Performance And Should Have Multiple Functional Alarms: High/low Temperature, Power Failure, Remote System, Sensor Error, Low Battery, Door Ajar, High Ambient, Dirty Condenser And Remote Alarm Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ce Standards Blood Bank Refrigerator (double Door) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 48.3 Cu Ft. (1369l) Drawer Type, Upright Heated Double Glass Door That Will Allow A Clear Display Of Stored Products Without Condensation At At Least 32⁰c And 85% Relative Humidity Condition Should Have At Least 12 Drawers Capable Of Providing Optimal Temperature For The Storage Of Blood Products At 2⁰c To 6⁰c Range Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine For A Stable And Reliable, Environmentally Safe Operation; The Refrigeration System Is Powered With A High-quality, Energy-efficient Inverter Compressor And Variable Speed Fan Motors. Temperature Control Responds Quickly And Reliably For A More Uniform Temperature Using Less Power And Lower Noise. Forced Air Cooling Type With Dual Control System Of High-precision Sensors And Mechanical Thermostat To Ensure That The Temperature Is Within Range Capable Of Monitoring Internal Temperature In Real-time, Records Historical Data And Alerts Abnormal Temprature Conditions Should Have A Built-in Battery That Can Continue To Support The Alarm System When There Is A Loss Of Power Supply 220~240/50/60 Power Supply (v/hz), 2.0a, 400w Power Microprocessor Electronic Controller And Lcd Touch Screen Digital Temperature Display That Can Show Temperature Graph, Working Status, Events And Alarm Record Stable Performance And Should Have Multiple Functional Alarms: High/low Temperature, Power Failure, Door Ajar, Sensor Failure, And Low Battery Standard Alarm Features Should Be A Sound Buzzer, Light Flashing, And Remote Contact Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ul And Ce Standards Platelet Agitator With Incubator High Performance Agitator With Incubator That Can Store And Ensure Platelet Viability Cabinet Type, Upright Double Transparent Insulation Glass Door Should Have At Least 10 Drawers Temperature Range Should Be At 20⁰ To 24⁰c Has High Efficiency Refrigeration System, Finned Evaporator, Fast Cooling Speed And Uniformity In Temperature Inside Intelligent Control For Refrigerating And Heating According To Ambient And Inner Temprature Cfc-free Refrigerant Forced Air Cooling Type Can Swing Constantly From Left To Right With No Shaking Or Crushing Around, Horizontal Oscillation Frequency Should Be At Least 60 ±5 Times Per Minute. Oscillation Amplitude Of At Least 50 Mm Can Store At Least 20 Blood Bags Has Uv For Disinfection And Is Capable Of Freely Setting The Disinfection Time 220~240/50/60 Power Supply (v/hz), 280w Microprocessor Control With Increment At 1⁰c And Has Led Digital Temperature Display Stable Performance And Should Have Multiple Functional Alarms: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery, Door Ajar Accessories Must Include The Following: Door Lock, Caster, Test Hole And Light Certified To Iso 9001 And Ce Standards Vertical Autoclave Fully Automatic Autoclave Capacity Should Be At Least 80 Liters Chamber Material Must Be Made Up Of Sus 304 Minimum Power Supply And Requirement Of 4600w , 220v, 32a 50/60/hz Capable To At Least 5 To 45⁰c Working Environment With Relative Humidity Of 10% To 85% 0.1⁰c Temperature Accuracy Sterilization Temperature Should Reach 105 To 135⁰c For 1 To 6000 Minutes And Melting Temp At 60-100⁰c Warming Temperature Should Reach 45 To 60⁰c For 1 To 6000 Minutes Drying Temperature Of 80⁰c To 140⁰c For 1 To 300 Minutes Maximum Working Pressure Of At Least 0.25 Mpa And Design Pressure Of At Least 0.3 Mpa Multilayered Pressure Protection System Has At Least 2 Stainless Steel Basket Microcomputer Controlled System With Big Lcd Screen For Easy Display Safety Features That Includes The Following: Self-induction Pressure Interlocking Device, Over Temperature Protection, Dry Scorch Protection System, Lid Closing Checking, Leakage Device Protection, Over Pressure Protection, Safety Valve, Over Current And Short Circuit Protection Certified To Ce And Or Ul Standards Particulars Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On Each Of The Equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair Each Of The Equipent Purchased During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Equipment Shall Be Delivered Complete With All Cabling, Connectors, And All Other Accessories Necessary For Full Operation Of The Equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Conducts Bi-annnual Preventive Maintenance Program And Provide Preventive Maintenance Report And Corresponding Stickers Attached To The Unit Within The Warranty Period Vendor Must Conduct Annual Calibration Program And Provide Calibration Certificate And Corresponding Stickers Attached To The Unit Within The Warranty Period. Vendor Must Respond With Technical Support Staff, Either Remotely Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user; Equipment Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimated For Major Spare Part/s. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Vendor Shall Provide Automatic Voltage Regulator (avr) And Uninterrupted Power Supply (ups) To Back Up The System On Each Equipment Purchased. Equipment Shall Be Delivered With At Least Two (2) Copy Of All Service Manuals And At Least Two (2) Copy Of All User Manuals. Certification From The Manufacturer That The Units Are Brand New And Not With Any Issues Or Defect. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted Equipment For Not Less Than Five (5) Years After The Warranty Period. Vendor Shall Provide Comprehensive Training Of Users In Operation, Basic And Advance Maintenance Shall Be Provided With Certificates, Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least Two (2) In-house Biomedical Technician Or Engineer And/or End User. Principal's/manufacturer's Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Equipment Must Be Manufactured By A Known And Reputable Company With Certificate Of Iso 9001:2015 And Iso 13485:2016 Or Its Equivalent. Inclusions Of The Following Items: At Least Two (2) Units 5 Liter Water Bath And At Least One (1) Unit Dry Bath. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 4 Unit: Lot Qty: 1 Unit Cost: 20,000,000.00 Total Cost: 20,000,000.00 Description: Thoracic Multidisciplinary Tower, Surgery 4k Monitor Camera System - Modular Camera Platform Camera System - Link Module For 4k And 4k/3d Camera Head Plastic Container For Camera Head Light Cable Light Source Footswitch Pedal Insufflator Insufflation Tubing Set Gas Filter Co2 High Pressure Hose Documentation System Usb Adaptor For Connection To Ccu Equipment Cart Monitor Swivel Arm Video-assisted Thoracoscopic Surgery Instruments Set Telescope Invisible Near-infrared (nir) / Fluorescence Imaging With Indocyanine Green (icg) 30° Tray For Cleaning Hd Monitor Connecting Cable For Videolaryngoscope Reusable Macintosh/curved Video Laryngoscope Blades #3 Reusable Difficult Blades For Adult Flexible Intubation Video Endoscope For Adult, Disposable Stand For Monitor Video Assisted Thoracic Multidisciplinary Surgical Tower, 1 Unit 4k Monitor, 1 Pc Supports 4k Via Displayport, 12g-sdi, And Hdmi 2.0 Inputs Backward Compatible With Hd Signals Screen Size: Must Be At Least 32 Inches Front Glass Must Be Optically Bonded, Ar Coated, Chemically Strengthened Glass Camera System, 1 Pc Modular Camera Platform That Combines Various Technologies Like Rigid, Flexible, 3d Endoscopy, 4k And Can Be Adapted With Invisible Near Infrared / Indocyanine Green (nir/icg) For Fluorescence Imaging. High-resolution Camera System For Universal Use 4k Resolution And Modern Image Processing Technology Connection Possibility For Use With Up To 3 Link Modules Link Module For 4k And 4k/3d Line Frequency Should Be At Least 50/60 Hz Camera Head, 1 Pc With 2 Freely Programmable Camera Head Buttons Focus Adjustable Via Focus Ring Image Sensor: 2 X 1/2.5″ Complementary Metal-oxide Semiconductor (cmos) Chip. Should Be Soakable Plastic Container For Camera Head, 1 Pc Autoclavable Suitable For Use With Steam, Gas, And Hydrogen Peroxide Sterilization, Sterilization Compatible External Dimensions (wxdxh): At Least 385mm X 255mm X 75 Mm Light Cable, 1 Pc At Least 250 Cm (l) And Ø4.8 Mm , For Use With Icg Application Disinfection Can Be Done Through Low Temperature Or Soaking Straight Light Source, 1 Pc Average Led Lamp Life Of At Least 30,000 Hours Standby Button With Memory Function Lamp Type: Two High-performance Leds, White Light Led And Near Infrared Led Footswitch Pedal, 1 Pc With Button For Switchover Function Cable Length At Least 500 Cm Insufflator, 1 Pc 2 Modes Ready: High Flow Mode And Pediatric Mode Dimension (w X D X H) : At Least 305mm X 164mm X 315mm With External Co2 Warmer At Least 7” Touchscreen Displays Precise Monitoring With Inclusions: Connecting Cable, Length 100 Cm (1pc), Universal Wrench (1pc) Insufflation Tubing Set, 1 Pc Reusable, Sterilisable, Heatable, At Least 2.65 M (length), For Use With Insufflation Unit, Max Flow: 50l/min Gas Filter, 1 Pc With Iso Connectors, Hydrophobic On Both Sides, For Single Use, Sterile, Pack Of At Least 25, For Use With Insufflation Units With Max. Gas Flow Of 50 L/min, Disposable Co2 High Pressure Hose, 1 Pc American Connection/iso-connection, At Least 102 Cm (length) Documentation System, 1 Pc Control Via Smartscreen With Dicom Connection Full Hd, 4k, And 3d Capture Internal Memory: At Least 2 Tb Usb Adaptor For Connection To Ccu Equipment Cart, 1 Pc Narrow, Tall, Rides On 4 Antistatic Dual Wheels Equipped With Locking Brakes Energy Beam With Integrated Electrical Sub Distributors With At Least 12 Sockets Equipment Cart (w X H X D) : At Least 660mm X 1474mm X 730mm Shelf (w X H X D): At Least 450mm X 25mm X 510mm Consisting Of: Base Module, Cover, Beam Package, Shelf, Drawer Unit With Lock, Equipment Rail, Camera Holder, Mains Cord, Length 100 Cm Monitor Swivel Arm, 1 Pc Height And Side Adjustable, Can Be Mounted On The Left Or On The Right Side Loading Capacity Max: 15 Kg, With Monitor Mount Video Electronics Standards Association (vesa) 75/100 Video-assisted Thoracoscopic Surgery (vats) Instruments Cannula, Suction, Video-assisted Thoracoscopic Surgery (vats), With Control, 1pc Scissors, Tc, Acc. Metzenbaum, 1pc Forceps, Slider-shaft, Cobra Dissector, 1pc Forceps, Slider-shaft, Acc. Foerster, 1pc Forceps, Slider-shaft, Lymph Nodes, 1pc Forceps, Slider-shaft, Acc. Harken, 1pc Scissors, Slider-shaft, Acc. Metzenbaum, 1pc Holder, Needle, Slider-shaft, Tc, 1pc Pusher, Knot, Tube Shaft, 1pc Container For Video-assisted Thoracoscopic Surgery (vats) Instruments , Sterilization Tray, Sterilization, Plugin Profile, 1pc Tray, Sterilization, Plugin Profile, 1pc Basket, Sterilization, Tray 1/1, 1pc Elastic Strap, 1pc Telescope For Icg Telescope Invisible Near-infrared (nir) Fluorescence Imaging With Indocyanine Green (icg) 30° Forward-oblique Telescope, Enlarged View, At Least 10mm (d) And 31 Cm (l), Autoclavable For Indocyanine Green, Fiber Optic Light Transmission Incorporated, 1 Pc Tray, For Cleaning, Sterilization And Storage Of Rigid Endoscope And One Light Cable, Including Holder For Adaptors, Silicone Telescope Holders And Lid, 1 Pc Airway Management Hd Monitor, 2 Units With At Least 8" Touch Screen Operation Minimum Image Resolution: 1920 X 1200 Pixel Capable Of Two Camera Inputs Compatible With Other Components Such As Flexible Intubation Video Endoscopes (single Use And Reusable) Retromolar Intubation Endoscope, Rigid Intubation Endoscope With Deflectable Tip, Video Laryngoscope Blades Components Such As Previous Version Of Video Laryngoscope Blades Are Compatible Capable Of Picture-in-picture And Side-by-side Modes Data Transfer From Sd Card To Usb Flash Drive Possible With Usb Port For Easy Data Backup With Hdmi Output For Connecting An External Monitor With Real Time Video And Image Capturing In At Least 16 Gb Sd Card Capable Of Audio Recording With Integrated Microphone With Automatic Video Recording Once Blade Or Video Unit Is Connected With Timer For Documenting Intubation Time Capable Video Clip Playback And Still Images Must Be Splash-proof According To At Least Ip54, Suitable For Wipe Disinfection Made Of Shock-resistant Abs Plastic Housing With Built In Rechargeable Li-ion Batteries Power Supply 110 - 240 Vac, 50/60 Hz Connecting Cable For Video Laryngoscope, With Length Of At Least 200 Cm, 2 Pcs Reusable Macintosh / Curved Video Laryngoscope Blades #3, 1 Pc Complementary Metal-oxide Semiconductor (cmos) Technology Light Alloy Design , Robust And Light Plug And Play Interface With Button On Blade For Documentation Of Images And Video Sequences Integrated Camera And Led Light Reusable Difficult Blades For Adult, 2 Pcs Complementary Metal-oxide Semiconductor (cmos) Technology Light Alloy Design Plug And Play Interface With Button On Blade For Documentation Of Images And Video Sequences Integrated Camera And Led Light With Port/catheter Introduction Size Of 16-18 Fr. Includes Guide Rod Made Of Stainless Steel With Atraumatic Tip For Use With Video Laryngoscopes, 1 Pack Includes Protection Cap For Cleaning And Disinfection, 1 Pc Flexible Intubation Video Endoscope For Adult, Disposable (single Use), 6pcs/pack, 1 Pack Direct Connection To Monitor Complementary Metal-oxide Semiconductor (cmos) Technology Clear, Pixel Free Images With Integrated Led Light Source Distal Tip Outer Diameter At Least 5.5 Mm Working Channel Inner Diameter: At Least 2.1 Mm Deflection Up/down: At Least 140°/140° Angle Of View: At Least 100° Working Length: At Least 65 Cm Must Have Tube Fixation With Suction Valve Stand Monitor, 2 Units Height Of At Least 1340 Cm Rollable With At Least Five Legs And Antistatic Castors Crossbar At Least Length 250 Mm X Diameter 25 Mm For Positioning The Monitor Storage Tray Dimensions (w X D X H): At Least 300 Mm X 200 Mm X 150 Mm With Blade Holder Set And Cable Winder Particulars Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Minimum Of Five (5) Year/s For Spare Parts & Service Upon Acceptance By End-user Vendor Must Repair Or Replace Any Item And/or Part/s Of The Equipment Found To Be Defective In Material Or In Workmanship Under Normal Use, Provided That The Equipment Is In Good Working Condition Thereafter, Within The Warranty Period Conduct Free Preventive Maintenance At Least Semi-annually Or According To Manufacturer's Recommendation/s Within Warranty Period. Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification From End-user; Technical Support Staff Response Time Within At Least Two (2) Hours Via Remote Access Or Maximum Of Twenty-four (24) Hours Either Via Physical Presence On Site. Equipment Down-time Within Warranty Period Due To Inherent Defect/s And/or Fault/s Shall Be Added To The Total Warranty Period Availability Of Support Staff Within Visayas Delivery, Installation, Commissioning, Permit/s, Training And Other Related Expenses Incurred Will Be Shouldered By Winning Bidder, Where Applicable Vendor Must Provide Intensive Operational Or Application Training With Certification/s For End-user/s And Intensive Technical Training For Maintenance/biomedical Staff. Must Certify The Availability Of Spare Parts For The Next Five (5) Years Vendor Must Have Existing/active Quality Management System Certification E.g. Iso Certification 13485:2016 And Its Equivalent For Importation, Warehousing, Installation & Servicing Of Active And Non-active Medical Services. Equipment Shall Be Delivered With At Least Two (2) Copies Of User Manuals. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production For At Least 2 Years, Installed And In Use At The Time Of Quote/bid Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s, Training And Other Sundries Necessary For The Complete Installation Of The Equipment Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or Engineer And/or Other End User. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.

Spain-madrid: Accounting And Auditing Services

Details: This Notice Is For Sources Sought Only. This Is Not A Request For Proposal Or Invitation For Bid. Solicitation, Specifications, And Drawings Are Not Available. the U.s. Army Corps Of Engineers, Caribbean District, Is Issuing This Source Sought Synopsis As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support This Requirement Foroperation And Maintenance Servicesfor La Chuleta Material Management Area (mma) Site, Rio Puerto Nuevo Project In San Juan, Puerto Rico. The Result Of This Market Research Will Contribute To Determining The Method Of Procurement. the Applicable North American Industry Classification System (naics) Code For This Proposed Acquisition Is562910- Remediation Services.the Small Business Size Standard For Naics Is 25 Million Usd. This Industry Comprises Establishments Primarily Engaged In One Or More Of The Following: (1) Remediation And Cleanup Of Contaminated Buildings, Mine Sites, Soil, Or Ground Water; (2) Integrated Mine Reclamation Activities, Including Demolition, Soil Remediation, Waste Water Treatment, Hazardous Material Removal, Contouring Land, And Revegetation; And (3) Asbestos, Lead Paint, And Other Toxic Material Abatement. cross-references.establishments Primarily Engaged In-- environmental Engineering Services--are Classified In Industry541330, Engineering Services; developing Remedial Action Plans--are Classified In Industry541620, Environmental Consulting Services; excavating Soil--are Classified In Industry238910, Site Preparation Contractors; individual Activities As Part Of A Reclamation, Remediation, Or Restoration Project--are Classified According To The Primary Activity; collecting, Treating, And Disposing Waste Water Through Sewer Systems Or Sewage Treatment Facilities--are Classified In Industry221320, Sewage Treatment Facilities. this Is Not A Solicitation For Proposal And No Contract Will Be Awarded From This Notice.submission Of Any Information In Response To This Market Survey Is Purely Voluntary; No Reimbursement Will Be Made For Any Cost Associated With Providing Information In Response To This Sources Sought. the Purpose Of This Synopsis Is To Gain Knowledge Of Interest, Capabilities, And Qualifications Of Various Members Of Theoperation And Maintenanceservices Community To Include Small Disadvantaged Business Including Firms Participating In The 8(a) Business Development Program, Service-disabled Veteran-owned Small Business (sdvosb); Veteran-owned Small Business, Hubzone Small Business, Small Business Concern, Woman-owned Small Business, Or Economically Disadvantaged Woman-owned Small Business And Other Than Small Business Community (unrestricted). The Government Must Ensure There Is Adequate Competition Among The Potential Pool Of Responsible Contractors. this Scope Foroperation And Maintenanceservices Will Include Operation And Maintenance Services For La Chuleta Material Management Area (mma) Site, Such As Preparation Of Management Plans, Coordination With Rio Puerto Nuevo Project Construction Contractors, Geotechnical Soil Testing, And Adequate Site Grading And Compaction Of Received Materials. The Work May Encompass All Tasks Necessary To Control Placement Of Clean Soil At The La Chuleta Mma Site To Achieve Maximum Capacity For Disposing Of Mechanically Excavated Soil, Including Supervision, Site Safety, And Quality Control. this Scope Of A-e Services May Also Include, But Are Not Necessarily Limited To, Maintenance Of Settlement Ponds, Topographic Surveying, Maintenance Of Roads Within The Mma Site, And Site Security During The Time Of Operations. The Contractor Shall Perform Closure Activities Such As Demolition Of Site Features And Grading Finishes If The Site Reaches Full Capacity. firms’ Responses To This Synopsis Shall Be Limited To 15 Pages And Shall Include The Following Information: firm’s Name, Address, Main Point Of Contact (poc) Telephone Number, Poc E-mail Address, Firm’s Website If Any, Cage Code And Uei Number, Company Size (small Or Large), In Accordance With Naics562910. firm’s Interest In Proposal/bidding On The Solicitation When It Is Issued. firm’s Capability To Perform A Contract Of This Magnitude And Complexity (include Firm’s Capability To Execute Comparable Work Performed Within The Past 5 Years: This May And Should Be Tailored Specifically To The Scope Of A-e Services Described Above. Brief Description Of The Work, Customer Name, Timeliness Of Performance, Customer Satisfaction, And Dollar Value Of The Project) – Provide At Least 3 Examples. firm’s Business Category, Other Than Small (large), And If A Small Business, Specify If Your Company Is Any Of The Following: Small Business, Small Disadvantaged Business Including Firms In The 8(a) Business Development Program, Service-disabled Veteran-owned Small Business (sdvosb); Veteran-owned Small Business, Hubzone Small Business, Small Business Concern, Women-owned Small Business, Or Economically Disadvantaged Women-owned Small Business. if Significant Subcontracting Or Teaming Is Anticipated In Order To Deliver Technical Capability, Firms Should Address The Structure Of Such Arrangements To Include Joint Venture Information If Applicable – Existing And Potential. all Responses To This Sources Sought Notice/market Research Will Be Evaluated And Used In Determining Acquisition Strategy. important:submission Of A Capabilities Statement Is Not A Prerequisite To Any Potential Future Offerings, But Participation Will Assist The Corps In Tailoring Requirements To Be Consistent With Industry Capabilities. This Synopsis Is For Information And Planning Purposes Only And Is Neither To Be Construed As A Commitment By The Government Nor Will The Government Pay For Information Solicited. Respondents Will Not Be Notified Of The Results Of The Evaluation. Statements That Do Not Meet All Requirements Or Are Submitted Within The Allotted Time Will Not Be Considered. Email Is The Preferred Method Of Submission To The Sources Sought. No Hardcopy Or Facsimile Submission Will Be Accepted. submission Instructions:interested Firms Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought No Later Than 4:00 Pm Est, 08 November 2024. All Responses Under This Sources Sought Notice Must Be Emailed To The Attention Of Jose.o.vazquez-torres@usace.army.mil And Katrina.l.chapman@usace.army.mil. prior Government Contract Work Is Not Required For Submitting A Response Under This Sources Sought. you Must Be Registered With The System For Award Management (sam) In Order To Receive A Government Contract Award. To Register, Go To Www.sam.gov.

Details: Description A. Concrete Works 2.1 Foundation/footing Cement Bags 120 Sand M3 15 Gravel M3 25 1.2 Beam Cement Bags 220 Sand M3 25 Gravel M3 35 1.3 Colunm Cement Bags 115 Sand M3 15 Gravel M3 25 1.4 On-grade Slab Cement Bags 250 Sand M3 25 Gravel M3 45 1.5 Stairs Cement Bags 99 Sand M3 15 Gravel M3 36 2. Reinforcement Foundation.wallforms 16mmx6m Deformed Bars Lenght 70 10mmx 6m Deformed Bars Lenght 50 #16 Tie Wire Kgs 13 2.2 Beam 16mmx6m Deformed Bars Lenght 350 12mmx6m Deformed Bars Lenght 70 10mmx6m Deformed Bars Lenght 200 #16 Tie Wire Kgs 45 2.3 Colunm 16mmx6m Deformed Bars Lenght 100 10mmx6m Deformed Bars Lenght 130 #16 Tie Wire Kgs 14 2.4 On-grade Slab 10mmx6m Defored Bars Lenght 510 #16 Tie Wire Kgs 70 2.5 Wall 10mmx6m Deformed Bars Lenght 220 #16 Tie Wire Kgs 15 2.6 Stairs 16mmx6m Deformed Bars Lenght 40 12mmx6m Deformed Bars Lenght 20 # 16 Tie Wire Kgs 5 2"x2"x12" Coco Lumber Pcs 600 1/2/" X4" X8' Ordinary Plywood Shts 90 #2.5 Cw Nails Kgs 20 #1 Fininshing Nails Kgs 10 #4 Cw Nails Kgs 30 4. Masonry Chb Pcs 10,000 Sand(mortar & Plaster) M3 15 Cement (mortar & Plaster ) Bags 325 B. Doors And Windows Double Swing Glass Window 2x2.10 Set 2 Solid Panel Door 1.80x2.10 Set 1 Solid Panel Doors 0.90x2.10 Set 2 Solid Panel Doors 0.70x2.10 Set 2 Fixed Window Glass Set 2 Fixed Window Glass Set 8 Awning Glass Window Set 2 C. Floor Tiles Ceramic Tiles Floor 60x60 Pcs 700 Tile Adhesive Bags 30 Tile Grout/white Cement Kgs 110 Cement Bags 30 D. Painting Works Wall Flat Latex Gals 45 Paint Brush #4 Pcs 10 Roller Paint 8' With Tray Pcs 10 E. Railings 2" G.i Pipe Schedule 40 Lenght 4 1" G.i Pipe Schedule 40 Lenght 11 F. Ceiling Wall Angle V-type 0.4mmx5m Lenght 95 Double Furring 0.4mmx50mmx5m Lenght 155 Carrying Channel 0.8mmx5m Lenght 120 Double Furring Clip Pcs 250 Panhead Screw 1/2 #6 Pcs 1000 Fiber Cement Board 4.5mm(siera Board) Pcs 140 Fibcem Screw 3/4 #7 Pcs 5000 G. Plumming 1/2" Dia G.i Pipe Lenght 20 1/2 " Dia G.i Union Pcs 20 1/2" Dia Gi.i Elbow Pcs 30 1/2"dia Gii Coupling Pcs 12 1/2" Dia G.i Tee Pcs 15 Gate Valve Pcs 4 4"dia Pvc Pipe Lenght 20 4 "dia Pvc Elbow 90 Degree Pcs 15 4" Dia Pvc Elbow 45 Degree Pcs 15 4"dia Pvc Wye Pcs 20 4"dia Pvc Clean Out W/ Plug Pcs 20 4 " Dia Coupling Pcs 15 4" X2" Dia Pvc Reducer Tee Pcs 15 3" Dia Pvc Pipe Lenght 15 3" Dia Pvc Elbow 90 Degree Pcs 50 3"dia Pvc Tee Pcs 20 3"dia Pvc Coupling Pcs 20 2"dia Pvc Pipe Lenght 8 2" Dia Pvc Elbow 90 Degree Pcs 20 2" Dia Pvc Tee Pcs 22 4" X2" Dia Pvc Reducer Wye Pcs 9 2" Dia Coupling Pcs 10 Pvc Solvent 400cc Cans 20 Teflon Tape 3/4 Rolls 20 H. Electrical 3.5m2 Thw 600v Mts 500 Pvc Pipe 1/2" Dia S 40 Lenght 30 Flexible Hose Mtrs 200 Entrance Cap 3/4 Pcs 2 Utility Box 2/4 Pcs 40 Junction Box 4x4 Pcs 40 Electrical Tape 3m Rolls 26 Box Type 1x 140 W Flourescent Lamp Set 15 18 W Energy Savings Lamp W/ Socket Set 4 Convenience Outlet (2 Gang( Flush Type Set 10 One Gang Switch ( Flush Type W/ Neon Light) Set 10 Three Gang Switch (flush W/ Neon Light) Set 10 Panel Board ( Main: 30at/50af 230 V 2p 60) Assy 10

Details: Description Request For Quotation (rfq) The National Housing Authority- Cebu District Office, Through Its Regional Office Bids And Awards Committee (robac 7) Intends To Procure The Following Project Which Will Be Undertaken In Accordance With Section 53.9 Of The 2016 Revised Implementing Rules And Regulations Of Ra 9184. Name Of Project Pr No. Ceb 003281: Delivery And Supply Of The 4th Quarter Janitorial Supplies Brief Description Janitorial Supplies For Cebu District Office Location 2f Machay Building, Gorordo Ave., Cebu City, Cebu Approved Budget For The Contract (abc) Twenty-two Thousand Two Hundred Forty- Five Pesos Only (php 22,245.00) Source Of Fund Mooe Contract Duration Thirty (30) Calendar Days Upon Receipt Of Purchase Order (po) Interested Service Provider/s Are Required To Submit The Following Documents, If Applicable: A. Mayor’s/business Permit B. Philgeps Registration Number C. Bir Certificate Of Registration D. Spa Or Secretary’s Certificate, Whichever Is Applicable, If The Signatory Of The Noa, Po/contract, Ntp Is The Duly Authorized Representative Of The Prospective Bidder Award Of Contract Shall Be Made To The Lowest Calculated And Responsive Quotation, Which Complies With The Item Description. The Service Providers’ Offer Or Quote Above The Approved Budget Of The Contract (abc) Shall Be Automatically Disqualified. Quotations May Be Submitted Manually Or Through Email On Or Before 10:00 A.m. Of November 11, 2024, At 2f Machay Building, Gorordo Ave., Cebu City, Cebu Or Email Address At Nha.robac7@gmail.com/reg7cebu.dist@nha.gov.ph. For Any Clarification, You May Contact Ms. Zowanna Lopez At Telephone Nos. (032) 232-5055 Or (032) 232-9048. The Nha Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sec 41 Of The 2016 Revised Irr No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Dante U. Estrobo Officer-in-charge, Cebu District Office Chairperson, Robac 7 Date: _____________________ Name Of Company: __________________________________________________________ Address: __________________________________________________________________ Name Of Store/shop: ________________________________________________________ Address: __________________________________________________________________ Tin: ______________________________________________________________________ Philgeps Registration Number: ________________________________________________ Instructions: 1. Accomplish This Rfq Correctly And Accurately 2. Do Not Alter The Contents Of This Form In Any Way. 3. All Technical Specifications Are Mandatory. Failure To Comply With Any Of The Mandatory Requirements Will Disqualify Your Quotation. 4. Failure To Follow These Instructions Will Disqualify Your Entire Quotation. Sir/madam: After Having Carefully Read And Accepted The Terms And Conditions In The Request For Quotation, Hereunder Is Our Quotation/s For The Item/s As Follows: Technical Specifications 1. Please Quote Your Best Offer For Item/s Below. Please Do Not Leave Any Blank Items. Indicate “0” If The Item Being Offered Is For Free. 2. Bidders Must State “comply” Or Any Equivalent Term In The Column “bidder’s Statement Of Compliance” Against Each Of The Individual Parameters Of Each Specification. Item Description Total Quantity Bidder’s Statement Of Compliance Unit Cost Total Cost (vat Inclusive) (vat Inclusive) 1 Garbage Bag (2xl, White) 10 Packs 2 Fabric Conditioner 30 Gals 3 Muriatic Acid 30 Gals 4 Surgical Gloves (large) 4 Boxes 5 Mop Head (heavy Duty) 6 Pcs 6 Baguio Broom 4 Pcs 7 Dishwashing Soap (big) 5 Gals 8 Multipurpose Cleaner 10 Gals 9 Multipurpose Rags (small) 200 Pcs Inclusions (if Any): Free Delivery Total *the Above-quoted Prices Are Inclusive Of All Costs And Applicable Taxes. Schedule Of Requirements A. Place: 2f Machay Bldg. Gorordo Ave., Cebu City B. Period/ Duration: Thirty (30) Calendar Days Upon Receipt Of Purchase Order (po) Financial Offer Approved Budget Cost Total Offered Quotation Twenty-two Thousand Two Hundred Forty-five Pesos Only (php 22,245.00) In Words: _____________________________ ____________________________________________________________________________________________________________________________________ In Figures: ________________________________________________________________________________________________________________________________________________________________________________ ***nothing Follows*** Signature Over Printed Name Position/designation Office Telephone No. Fax/mobile No. Email Address/es Terms And Conditions 1. Bidders Shall Provide Correct And Accurate Information Required In This Form. 2. Bidders May Quote For Any Or All The Items. 3. Price Quotation/s Must Be Valid For A Period Of Thirty (30) Calendar Days From The Date Of Submission. 4. Price Quotation/s To Be Denominated In The Philippine Peso Shall Include All Taxes, Duties And/ Or Levies Payable. 5. Quotation Exceeding The Approved Budget For The Contract Shall Be Rejected. 6. Award Of The Contract Shall Be Made To The Lowest Quotation (for Goods And Infrastructure) Or, The Highest Rated Offer (for Consulting Services) Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. 7. Other Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initials By You Or Any Duly Authorized Representative/s. 8. In Case Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated Quotation/ Lowest Calculated And Responsive Quotation, The Nha Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. 9. The Item/s Shall Be Delivered According To The Requirements Specified In The Technical Specifications. 10. The Nha Shall Have The Right To Inspecz`t And/ Or Test The Goods To Confirm Their Conformity With The Technical Specifications. 11. Liquidated Damages Equivalent To One Tenth Of One Percent (0.1%) Of The Value Of Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Nha Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten (10) Percent Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. Signature Over Printed Name Position/designation Office Telephone No. Fax/mobile No. Email Address/es

Details: Description Please Quote Your Price For The Item/s Listed Below With The Following Conditions: • Electronic Copy Of Quotations Will Only Be Accepted If Sent Through The Bac E-mail Address, Admbac@itdi.dost.gov.ph And From The Official Email Address Of The Bidder Addressed To Mr. Eric M. Charlon, Itdi-bac Chairperson, Sub-committee On Shopping & Small Value Procurement. • Sealed Quotations Must Be Submitted To The Bac Office Addressed To Mr. Eric M. Charlon, Itdi-bac Chairperson, Sub-committee On Shopping & Small Value Procurement Per Quotation Indicating The Solicitation No. In Front Of The Sealed Envelope. • This Will Be Awarded Per Item To The Lowest Calculated Responsive Bidder. • Specify The Brand, Model And Specifications In Your Quotation With The Letterhead Of Your Company And Your Signature (quotations Without Specified Details Are Subject For Outright Disqualification). Deadline For Submission Of Bids: 1:00 P.m. – November 11, 2024 (monday) 1) 1 Unit Microwave Oven Compact Inverter Grill Microwave Oven With Turbo Defrost Color: Black Dimensions (wxhxd): 480-490mmx390-400mmx280-290mm Capacity: At Least 23l Cooking Power: 800w Tumtable Diamter: 280-290mm Display: Lcd Weight: 13-14kg Auto Cook/reheat: Yes Quick Minute: Yes With At Least 12 Auto Menus Handle Door Release Power: 220-240vac 2) 1 Set Flake Ice Maker Ice Type: Flake Ice Or Crushed Ice Refrigerant: R134a Storage Bin Capacity: 5kg Or Larger Condenser Type: Air Cooled Capacity: 10 Kg / Day Or Better 3) 5 Units Water Dispenser -bottom Loading -hot, Cold, Room Temp. Dispense Function -hygienic Dispense System -food Grade Stainless Steel Water Reservoir -bpa Free -with Light Indicators -with Built In Uv-c Water Sterilization 4) 2 Pcs Heavy Duty Ice Box Cooler Dimension: 39 X 31 X 29 Cm Ice Retention: 2 Days Or Better Capacity: 15.2 L 5 1 Unit Humidifier 35000 Page 2 Of 3 38 Sq.m Air Purifier, Hepa Filter, Humidifier Special Program Mode: Lon Shower Mode Pci Spot Mode Virus Patrol Intelligent Mode With 7 Detection: Pm25 Dust Odor Humidity Light Temperature Motion Air Purifier With Humidifier 7000 High-density Pci Shower Flne-dust Block Pre Filter Hepa Filter Spot Mode Roller Caster And Tank Handle On/off Timer (1,2,4,8h) Side Moving Caster Haze Mode Separate Clean Sign Indicator Non-washable Panda Filter (deodorizer) 6) 2 Set Coffee Maker 12 Cups, Coffee Maker Coffee Maker Type: Drip Coffee Maker Capacity: 12 Cups Capacity Wattage: 900 Watts Electric Coffee Maker Lcd Display Programming Removable Coffee Basket Drip Stop Brew Mode Function Warming Plate Pause And Serve Function Cord Storage Metal Housing With Thermal Cut-off Fuse Re-usable And Washable Coffee Fiiter 7) 2 Unit Smart Tv 75 Inches Ultra Hd Size: 75″ Backlight: Direct Led Operating System: Vidaa U Voice Command Built-in Isdb-t Tv System: Pal/ntsc Sap/mts: Yes Display Resolution: Ultra Hd 3840×2160 Dolby Vision Auto Low Latency Mode (allm) Vivid Motion: 60hz Or Better Dynamic Contrast Ratio: 3,000,000:1 Aspect Ratio:16:9 Brightness: 500 Cd/m2 Or Better Dolby Digital Dolby Digital Plus Screen Sharing Dlna / Content Sharing Casting Wifi / Lan Bluetooth Usb 2.0 Jpeg, Mp3, Mkv X2 Hdmi Input X3 (2.0) Antenna Input X1 (ntsc) Composite Audio / Video Input X1 Earphone Output X1 Power Requirement 100-240v 50/60hz Ac Power Consumption 240w Standby Power Consumption <0.5w User Manual Remote Control Wall Bracket Delivery Period: 30 Calendar Days Warranty: 1 Year Manufacturer's On Parts And/or Services Important Reminders: Price: Inclusive Of All Applicable Taxes Price Validity: Pls. Specify Payment Terms: 15-30 Days Credit Delivery Terms: Pls. Specify Warranty Terms: Pls. Specify (if Applicable) Chemicals And Reagents- Delivery Shall Be Accompanied With Certificate Of Analysis Equipment- Delivery Shall Be Accompanied With Installation/test And Warranty Certificates Computer And Computer Parts- Delivery Shall Be Accompanied With Test/warranty Certificates This Shall Be Part Of The Delivery If Found Acceptable. Items Are To Be Delivered At Property & Procurement Section, 2nd Floor, Metrology Bldg., Itdi, Dost Compound, Bicutan, Taguig City. Additional Requirements: Upon Submission Of Quotation (abc > P50,000.00) * Philgeps Registration Certificate/number * Mayor’s/business Permit * Income/business Tax Return Or Tax Clearance Certificate * Pcab License (for Infra Projects) * Tax Identification Number (tin) * Bank Details: Account Name, Account Number, Bank Name And Branch (preferably Landbank Of The Philippines) Note: For Bank Transfers, If The Creditor’s Account Is Maintained Outside The Agency’s Mds-gsb, Corresponding Bank Charges Shall Be Borne/paid By The Creditor/payee Concerned.