Cleaning Tenders

Description: Portugal – Cleaning And Sanitation Services – Serviço De Recolha Seletiva Porta-a-porta E Transporte A Destino Final De Biorresíduos

Description: Poland – Cleaning And Sanitation Services – Świadczenie Kompleksowych Usług Sprzątania Powierzchni Wewnętrznych, Usług Pomocniczych Przy Pacjencie, Utrzymania Porządku Na Terenie Zewnętrznym Oraz Usługi Prania Bielizny Szpitalnej Wraz Z Dzierżawą W Dczpdm W Lubinie

Details: The National Institute Of Standards And Technology (nist) Has Been Conducting Extreme Ultraviolet (euv) Metrology For Over Fifty Years. The Metrology Services Are Provided For Industry, Academia And Government Customers For A Wide Variety Of Applications. Nist’s Euv Metrology Effort Relies On The Synchrotron Ultraviolet Radiation Facility (surf Iii) As Its Primary Euv Light Source For Both Source-based And Detector-based Radiometric Measurements. One Of The Beamlines (beamline 7) Located On Surf Iii Includes A Grazing Incidence Monochromator And Reflectometer Facility For Reflectance Measurements In The Euv Region. This Sources Sought Is For A Replacement Reflectometer Vacuum Chamber And Goniometer For Beamline 7 To Provide Improved Performance, Reliability And Efficiency. The Beamline 7 Monochromator Is Also To Be Replaced Which Is A Subject Of An Additional Sources Sought Request. (notice Id: nist-fy25-chips-0067 On Sam.gov) nist Is Seeking Information From Sources That May Be Capable Of Providing A Solution That Will Achieve The Objectives Described Above, In Addition To The Following Essential Requirements: location: The Reflectometer Shall Be Installed At The Surf Iii Facility At Nist’s Gaithersburg Campus. Surf Iii Operates With The Following Conditions: electron Energy: 380 Mev electron Beam Radius Of Curvature: 0.83 M frequency: 114 Mhz (2 Bunches @ 57 Mhz) beam Current: 300 Ma To 100 Ma beam Size (h X W, Fwhm): 2 Mm X 3.56 Mm – 3.2 Mm, (depending On Beam Current) beam Height: 157.5 Cm Above Floor the Reflectometer Must Occupy Available Space: reflectometer Shall Be Located In The Existing Laboratory Space With The Goniometer’s Motions Centered At The Beamline 7 Monochromator’s Output Approximately 402 Cm (tbd, Based On Monochromator’s Design) Along Line Of Sight From The Radiation Wall. height Of Exit Slit: 114 Cm From Laboratory Floor. (estimated, Tbd Based On Monochromator’s Design) monochromator Output: Range – 6 Nm To 35 Nm, F/# (estimated) 50 (horizontal) X 167 (vertical) Sketch Of Laboratory Space Location Included For Clarity. (figure 1) vacuum Requirements: The Reflectometer Must Be Housed In An Ultrahigh Vacuum System: final System Is Required To Have A Base Pressure Below 5 X 10-8 Torr And Pass A Residual Gas Analysis Test With Partial Pressures No Higher Than 10-11 Torr At Atomic Mass Units Higher Than 44. The System Will Incorporate Copper Gasketed-knife-edge Seals (conflat® Or Equivalent) For Flanges And Use Imperial Fasteners. Flange/port Quantity And Position To Be Determined Based On Design. Nist Will Provide Rough Pumping Via A Dry Scroll Pump And Roots System And High Vacuum Via Quantity 2 Cryogenic Pumps (10” Body, 3000 L/s) And Appropriate Gate Valves For Pumps. chamber Shall Include Multiple Internal And External Attachment Point (quantity Tbd) For Attachment Of Instrumentation On The Internal And External Walls Of The Vacuum Chamber. a Large Main Door For The Chamber Will Be Required For Sample Insertion And Removal And Goniometer Maintenance. The Main Door Must Allow For Personnel Entry Into The Chamber And Accommodate Sample Insertion And Removal. The Main Door Must Accommodate Daily Use Of The Door With An Elastomer Seal And Tool-free Sealing And Opening. the Chamber Must Accommodate Personnel Entry To Accommodate Sample Placement And Removal And Goniometer Maintenance. Vendor And Nist Will Collaborate To Specify A Nist-provided Sample Preparation Clean Space And Sample Handling Assist Hardware. motion Requirements: The Reflectometer Must Include A Motion System Housed Within The Described Ultrahigh Vacuum System. The Sample Motion System Requirements: Maximum Sample Size 600 Mm Diameter, 250 Mm Thick, 50 Kg Mass goniometer Must Allow Horizontal Sample Loading axes (relative To Incident Beam): x: Range ± 25 Mm, 0.01 Mm Resolution, options For Range Of ± 25 Mm To ± 50 Mm y: Range -350 Mm/+25 Mm, 0.01 Mm Resolution z: Full Travel 175 Mm, 0.01 Mm Resolution, must Allow For Mounted 250 Mm Thick Grazing Sample To Be Lowered Out Of Way Of Incoming Euv Beam. pitch (from Normal): Range -5° To + 95°, 0.02° Resolution roll: 360° Continuous, 0.02° Resolution yaw: Range ± 5°, 0.02° Resolution, options For Range Of ± 15° And ± 30° figures 2-4 Included For Clarity. goniometer Will Include Sample Platen That Is Minimum 650 Mm In Diameter With A Hole Pattern Tbd With A Surface 290 Mm (or More) Below Incoming Euv Beam. detector Motion Requirements: Detector Turret (provided By Nist) Shall Move In A 2-theta Type Motion Around Sample Goniometer’s Center Of Motion. (tolerance Tbd) detector Turret With 2 Detectors And Scintillator-based Camera (provided By Nist), Figure 5 Included. 0 To 360 Rotation. Detector Pitch: Range +185° To -5°, 0.02° Resolution detector Yaw: Range +/- 5°, 0.02° Resolution detector Distance Motion: Range 200 Mm, 0.02 Mm Resolution. Varies Radius Of Motion For Detector Pitch To Be Varied From 350 Mm To 150 Mm. figure 6 Included For Clarity. all Axes Will Include Uhv Compatible Quadrature Encoders, Limit And Home Switches. All Optical Encoders Will Enclosed/shielded To Eliminate Leakage Of Radiation. all In Vacuum Cabling Shall Be Uhv Compliant And Included. All Required Electrical Feedthroughs Shall Be Connector Based (no Flying Lead Or Floating Pin), Conflat® (or Equivalent) Sealed. all Atmospheric Cabling Required For The Motion Systems Shall Be Provided By The Vendor And Connectorized With A Minimum Length Of 5 M. the Vendor Shall Provide The Option To Include The Electronics (controllers, Amplifiers, Etc) Required For Goniometer And Detector Motions Or Nist May Provide Electronics For The Goniometer And Detector Motions If This Option Is Not Selected. mechanical Requirements: The Reflectometer Chamber And Goniometer Must Be Installed In The Available Space In The Surf Iii Experimental Hall Laboratory Space: nist Shall Provide Available Mechanical Drawings Of Existing Space And Access To Space For Vendor Measurements And Evaluation. The Vendor Shall Not Make Any Modifications To Existing Space Without Permission From Nist. vacuum System Support Structure Shall Be Provided By Vendor And Utilize Materials Appropriate For Long-term Thermal And Mechanical Stability Of The Reflectometer Vacuum Chamber And Goniometer. all Hardware Must Be Installed By Vendor And Must Fit Through Existing Doorway Openings (178 Cm Wide X 210 Cm Tall). The Vacuum Chamber And Goniometer Shall Be Installed With Goniometer And Detector Motions Centered On The Beamline Monochromator’s Output Spot Location. (tolerance Tbd) nist Will Arrange For Removal Of Existing Beamline Prior To Vendor Delivery Of Vacuum Chamber And Goniometer. documentation And Reporting: Upon Delivery Of Reflectometer Chamber And Goniometer Vendor Shall Provide: mechanical Drawings (or 3d Models) Of All Custom Mechanical Components Included In Delivered Reflectometer Chamber, Goniometer And Detector Motion Systems. bill Of Materials Of Components Included In Delivered Reflectometer Chamber, Goniometer And Detector Motion Systems. documentation Detailing Operation Of Reflectometer Chamber And Associated Motions Including Details Of Mechanical Systems As Required For Operation Of The Reflectometer Chamber, Goniometer And Detector Motion Systems. vendor Shall Provide Monthly Reports During Design And Manufacturing Stages To Keep Nist Informed Of Status Of The Manufacture And Delivery Schedule. please Include Estimate Of Lead Time With Any Response To This Sources Sought Notice. how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Information. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response: Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed In This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. Please Note That To Be Considered For Award Under Any Official Solicitation, The Entity Must Be Registered And “active” In Sam At The Time Of Solicitation Response. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). identify The Equipment That Your Company Sells That Can Meet The Objectives Addressed In The Background Section Of This Notice. For Each Product Recommended To Meet The Government’s Requirement, Provide The Following: manufacturer Name model Number technical Specifications if Your Company Is Not The Manufacturer, Provide Information On Your Company’s Status As An Authorized Reseller Of The Product(s) describe Performance Capabilities Of The Product(s) Your Company Recommends To Meet The Government’s Requirements. Additionally, If There Are Other Features Or Functions That You Believe Would Assist Nist In Meeting Its Objectives Described Above, Please Discuss In Your Response. discuss Whether The Equipment That Your Company Sells And Which You Describe In Your Response To This Notice May Be Customized To Specifications And Indicate Any Limits To Customization. identify Any Aspects Of The Nist Market Research Notice, Including Instructions, And Draft Minimum Specifications In The Background Section You Cannot Meet And State Why. Please Offer Suggestions For How The Market Research Notice And Draft Minimum Specifications Could Be Made More Competitive. state Whether The Proposed Equipment Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Equipment Is Manufactured. identify Any Plans/possibilities For Changes In Manufacturing Location Of The Aforementioned Equipment And Provide Relevant Details, Including Timeline. for The Naics Code Listed In This Notice: indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. describe Services That Are Available With The Purchase Of The Aforementioned Equipment From Your Company Such As Installation, Training, And Equipment Maintenance. describe Standard Terms And Conditions Of Sale Offered By Your Company For The Recommended Equipment Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms; Manufacturer Warranty (including Details Regarding Nature And Duration); If Available, Description(s) Of Available Extended Warranty; Equipment Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Equipment, If Available. state Whether Your Company Offers Facility Renovation Services Related To Installation Of The Recommended Equipment At Its Delivery Destination, If Required Per The Nist-identified Minimum Specifications, And Provide Description Of Said Services. Indicate If Your Company Performs The Facility Renovation Services Or Typically Subcontracts The Work To Another Company. Indicate If Your Company Would Be Interested In Inspecting The Intended Installation Site During The Market Research Phase. state Published Price, Discount, Or Rebate Arrangements For Recommended Equipment And/or Provide Link To Access Company’s Published Prices For Equipment And Services. if The Recommended Equipment And Related Services Are Available For Purchase On Any Existing Federal Supply Schedule Contract(s) Or Other Contracts Against Which Nist May Be Able To Place Orders, Identify The Contract Number(s) And Other Relevant Information. identify Any Customers In The Public Or Private Sectors To Which You Provided The Recommended Or Similar Equipment. Include Customer(s) Information: Company Name, Phone Number, Point Of Contact, Email Address. provide Any Other Information That You Believe Would Be Valuable For Nist To Know As Part Of Its Market Research For This Requirement. state If You Require Nist To Provide Additional Information To Improve Your Understanding Of The Government’s Requirement And/or Would Like To Meet With Nist Representatives To Discuss The Requirement And The Capabilities Of The Identified Equipment. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received 5 Days Prior To The Response Date. If The Contracting Officer Determines That Providing A Written Amendment To This Notice To Document Question(s) Received Would Benefit Other Potential Respondents, The Questions Would Be Anonymized, And A Written Response To Such Question(s) Would Be Provided Via An Amendment To This Notice. important Notes responses Must Be Sent To Both The Contract Specialist And Contracting Officer Listed In The Notice. Responses That Do Not Include The Contracting Officer Will Not Be Considered. this Notice Is For Market Research Purposes And Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. There Is No Solicitation Available At This Time. this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Capability. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. after A Review Of The Responses Received, A Synopsis And Solicitation May Be Published On Gsa’s Ebuy Or Sam.gov. However, Responses To This Notice Will Not Be Considered An Adequate Response To Any Such Solicitation(s). the Responses Shall Not Exceed 10 Pages Including All Attachments, Charts, Etc. thank You For Taking The Time To Submit A Response To This Request!

Description: Finland – Cleaning Services – Ateria Ja Puhtauspalveluiden Hankinta

Description: Announcement of the Procurement of the Service of Cleaning the Rooms in the Facilities of the District Court in Jelenia Góra and Washing the Glass Facade of the Building at ul. Mickiewicza 21

Description: CATEGORY: Cleaning, Sanitation and Disinfection Service - Outcome Based - Cleaning the building halls stair case road compound wall internal and External items like furniture TV telephone and round the clock utility services like taking care of all kinds of ma.. , Cleaning, Sanitation and Disinfection Service - Outcome Based - Cleaning the chamber halls stair case road compound wall internal and external sanitary and water supply items furniture telephone and taking care of all kinds of materials of office at ..

Description: CATEGORY: Custom Bid for Services - NS1 items Labour cost for work of Mechanized cleaning Rag picking at Rewari station for a period of 04 years complying terms and conditions stipulated in the tender document , Custom Bid for Services - NS2 items Cost of machines with AMC Consumables gadgets and PPE including uniforms for Mechanized cleaning Rag picking at Rewari station for a period of 04 years complying terms and conditions stipulated in the tender d..

Description: CATEGORY: Induction Cook top Make Prestige or eqvt , Casserole 2 litre , Casserole 1.5 litre , Degchie Aluminium 18 inch with lid , Degchie Aluminium 15 inch with lid , Water jugs stainless steel 1.5 Ltr Cap , Serving trays Large Plastic , Serving trays Medium Plastic , Coaster Plates set of 6 PCs , Desert Forks Stainless steel , Butter Knife Stainless steel , Table Spoons Stainless steel , Rice Spoon Stainless steel , Desert spoons stainless Steel , Tea spoons stainless Steel , Flask 1 Ltr Stainless Steel , Food Warmers Stainless Steel , Food Warmers Stainless Steel-B , Mixer grinder , Toaster 4 Slice , Water Dispenser Cap , Microwave oven , Refridgerator , Deep Freezer , Exhaust Chimney stainless steel min 1000 , Garbage Bin Large Plastic , Dining clothes , Hollow mats or table mats , Dustbin Small plastic , Mosquito repellent machine , Emergency light , Fly Insect Killer machine double rod , Napkin Holder Stainless Steel , Vegetable cutting Tray Plastic , Tandoor Medium , Bucket Plastic , Mug Plastic 1 Ltr , Bath stool , Soap Case , Liquid Soap Holder , Tooth Brush Holder , Toilet Cleaning Brush , Wiper , Bed sheet single , Bed Sheet Double , Bed cover single , Bed Cover Double , Blanket Single , Mink Blanket , Pillow Foam Microfill , Quilt size Single , Quilt size Double , Quilt cover Single , Quilt cover Double , Bath Towel Large size , Hand Towel , Mattress single , Electric Extension Cord , Pen Stand , Slippers , Door Mat Welcome for each room , Door Mat cushions Soft for toilet doors , Flower Pot , Clothes stand , Locks , Centre Table , Waste paper basket , Table Dustbin Small , Hanger Plastic Al Steel , Wall clock Silent Type , Table lamp , Heat Convector halogen room heater , Audio Visual display equipment , Audio Visual display equipmen , Electric kettle , Floor Rug , Intercom Telephone , Water Flask , Cloth Peg , Clip Board , Computer , Printer , UPS , Artefacts , Curtain for window doors full length , Wifi Point Modem , Notice bard , Iron , Key Board Box , Shoe Shiner , First Aid Kit , Washing machine , Inverter , Backup , Paper Shredder , Garden Chair

Description: Broom, For Cleaning

Details: Description Supply And Delivery Of Office Supplies And Materials To Be Used During The Monitoring And Conduct Of Program For International Student Assessment (pisa) Air Fresher, Aerosol, 280ml/150g Min 13 Cans @ P275.00 Albatros 10 Pcs @ P75.00 Battery Aa Rechargeable 5 Pcs @ P200.00 Battery Aaa Rechargeable 5 Pcs @ P175.00 Battery Aa, 4's 42 Packs @ P125.00 Battery Aaa, 4's 41 Packs @ P175.00 Black Ballpen 22 Boxes @ P150.00 Bond Paper, Short 5 Reams @ P300.00 Clip Back Fold, 19mm 15 Boxes @ P40.00 Clip Back Fold, 25mm 13 Boxes @ P50.00 Clip Back Fold, 32mm 12 Boxes @ P75.00 Clip Back Fold, 50mm 15 Boxes @ P110.00 Data File Box 10 Pcs @ P150.00 Dishwashing Liquid, 1l 10 Btls @ P200.00 Double Sided Tape 1" 27 Rolls @ P45.00 Double Sided Tape 1/2" 23 Rolls @ P30.00 Duct Tape, 48mm 4 Rolls @ P130.00 .5 Sign Pen (blue) 3 Boxes @ P2,000.00 Energel .7 Sign Pen (black) 9 Boxes @ P20,00.00 Envelope Brown A4 Size 2 Boxes @ P1,500.00 Envelope Brown Legal Size 4 Boxes @ P1,750.00 Envelope White Mailing 2 Packs @ P250.00 Epson Ink 003, Black 25 Btls @ P450.00 Epson Ink 003, Cyan 9 Btls @ P450.00 Epson Ink 003, Magenta 9 Btls @ P450.00 Epson Ink 003, Yellow 9 Btls @ P450.00 Epson Ink 664, Black 40 Btls @ P450.00 Epson Ink 664, Cyan 17 Btls @ P450.00 Epson Ink 664, Magenta 17 Btls @ P450.00 Epson Ink 664, Yellow 17 Btls @ P450.00 Expandable Plastic Envelope, Legal Size, Clear, With Handle 8 Pcs @ P100.00 Extension Cord 3 M 9 Pcs @ P300.00 External Hard Drive, 1tb 2 Pcs @ P4500.00 Fastener, Metal, 70mm Between Prongs 16 Boxes @ P75.00 Filing Tray Metal, 3 Layer 3 Pcs @ P900.00 Flash Drives 32, Gb 6 Pcs @ P450.00 Hand Soap, Safeguard White, 3's 5 Boxes @ P150.00 Insecticide, 600ml Min. 11 Cans @ P200.00 Liquid Bleach, Gallon 4 Gals @ P250.00 Magazine File Box, Large Size, Made Of Chipboard 23 Pcs @ P200.00 Masking Tape 24mm 34 Rolls @ P50.00 Masking Tape 48mm 49 Rolls @ P100.00 Mouse, Usb Connection Type 2 Pcs @ P250.00 Note Pad 2x3'' 46 Pads @ P35.00 Note Pad 3x3'' 85 Pads @ P45.00 Note Pad 3x4'' 65 Pads @ P55.00 Pencils No. 2, Mongol 12 Boxes @ P150.00 Permanent Marker Black 10 Boxes @ P600.00 Photo Paper, A4, Size 20 Packs @ P100.00 Puncher, Paper, Heavy Duty, With Two Hole Guide 1 Pc @ P250.00 Record Book, 300 Pages, Size: 214mm X 278mm Min Pref. Official 30 Books @ P250.00 Record Book, 500 Pages, Size: 214mm X 278mm Min, Pref. Official 33 Books @ P300.00 Scissors , Medium Size 22 Pcs @ P75.00 Scotch Tape 1'' 60 Rolls @ P75.00 Scotch Tape 2'' 25 Rolls @ P100.00 Special Paper A4, 200 Gsm 16 Packs @ P65.00 Special Paper Legal, 200 Gsm 69 Packs @ P75.00 Stapler With Remover, Max 1 3 Boxes @ P650.00 Sticker Paper A4 Matte 8 Packs @ P75.00 Toilet / Urinal Bowl Cleaner (medium) 7 Pcs @ P130.00 Trash Bag, Black, Medium Size, 100s 12 Rolls @ P200.00 Wastebasket, With Cover, 20l 1 Pc @ P300.00 White Board Marker (black) 14 Pcs @ P75.00 White Folder A4 580 Pcs @ P9.00 White Folder Long 945 Pcs @ P12.00 Clip Back Fold, 25mm 13 Boxes @ P45.00 Clip Back Fold, 32mm 13 Boxes @ P60.00 Expandable Folder, Legal Size 76 Pcs @ P40.00 Rubber Band, No. 18 2 Boxes @ P300.00 Epson 3210 Printer 7 Units @ P15,000.00 Packaging Tape, 2'' 1 Roll @ P75.00 Universal Socket Adapter 10a 250v 6 Pcs @ P75.00 Solid State Drive, 500 Gb, 2.5'' 1 Pc @ P3,500.00 Electrical Tape 5 Rolls @ P30.00 Lan Tester 1 Unit @ P200.00 Canon Pixma 750 Black 2 Carts @ P1,100.00 Brother Dcp T720dw Ink Black 1 Btl @ P800.00 Brother Dcp T720dw Ink Cyan 1 Btl @ P800.00 Brother Dcp T720dw Ink Yellow 1 Btl @ P800.00 Brother Dcp T720dw Ink Magenta 1 Btl @ P800.00 Hdmi Splitter 4 Slots 1 Pc @ P1,250.00 Hdmi Cord, 30m, High Speed, Braided Cord 1 Pc @ P2000.00 Wireless Presenter 1 Pc @ P3,000.00 Rj 45 10 Pcs @ P5.50 Filing Cabinet, 4 Drawer With Vault 1 Pc @ P17,500.00 Interested Suppliers Shall Submit Their Sealed Quotation Personally At Deped City Of San Fernando, San Isidro, City Of San Fernando, Pampanga On Or Before March 5, 2025, 5:00 Pm Together With The Following Documents, To Wit; 1 Philgeps Certificate 2. Mayor's Business Permit 3. Dti Permit 4. Tax Clearance (if Available)