Tenders of City Of Cape Town

* Round Bar - Material: Steel; Thickness: 10mm; Specification: Lacquer Covered Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.

* Nb!! Preferred Supplier To Sumbit Final Product For Approval To Communication Department For Final Approval. Samples Shall Be Supplied By A Bidder At His/her Own Expense And Risk. The City Shall Not Be Obliged To Pay For Such Samples Or Compensate For The Loss Thereof, Unless Otherwise Specified In The Bid Documents. The City Reserves The Right To Keep Samples Supplied By The Appointed Bidder. Unsuccessful Bidders Can Collect Their Samples Within 90 Days After The Final Notification Of Award Has Been Send To Suppliers, After Which The City Has The Right Not To Return Such Samples And To Dispose Of Them At Its Own Discretion. Please Note That After Closing Date Of Rfq It Will Be Request For Suppliers To Supplier To Submitt Actual Samples With In 3 To 4 Days. Aluminium Water Bottle 750ml Capacity Carabiner Belt Clip Size: 7.2cm (w) X 25cm (h) X 7.2cm (d) Solid Colour Body Size: 6.6 X 17.5cm Colours: Silver See Attached Picture For The Logo For More Information Contact: Miranda Lakay On 021 400 3766 Miranda.lakay@capetown.gov.za Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. * 100 Black Drawsting Bags Everyday Nylon Drawstring Bags Bh-40 Size: 35 X 43cm (l X H) Logo City Of Cape Town Logo Printed In White Recreation And Parks Camp Cape Town Printed Below Coct Logo In White Please Email Miranda On Miranda.lakay@capetown.gov.za For Pictures Of The Items Before You Quote On Them For Telephonic Enquiry 021 400 3766 * Dispososable Ponchos In A Ball Keyring No Artwork Required 100 Please Email Miranda.lakay@capetown.gov.za For A Picture Of The Poncho Before Submitting The Quote, To Make Sure You Quoting On The Proper Item

* Washer - Type: Water Meter; Material: Nylon; Inside Diameter: 19mm; Outside Diameter: 30mm; Thickness: 1mm; Water Meter Size: 22mm. Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent *********************** Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. ********************* Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent

* Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Hosehighpressure 1wire 3/8x30metre * Pa-drain Cleaning Nozzle * Pa-nipple M22x1.5 3/8bsp M Adaptor Contact Person Edward John Jacobs 078 810 8544 / 021 444 4813 Hanover Park Depot Corner Of Hanover Park Avenue And Downberg Road Hanover Park Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times***

* Cable - Material: Copper; Cable Type: Flat Twin Earth; Conductor Cross-section Area: 2.5mm²; Outer-sheath Material: Pvc; Outer-sheath Colour: White; Voltage Rating: 300/500v; Length: 100m; Core Identification: 2 Cores (red And Black); Cable Description: Coper Conductor To Sans 1411-1, Pvc Insulated To Sans 1411-2, Laid Up With A Bare Copper Earth-continuity Conductor Between Them, Pvc Sheathed To Sans 1411-2; Specification: Sans 1507-2; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.

* Ga12500388 Contact Person: Lewine Walters 021 4003856 Or Lee-anne Japtha 065 657 0758 Delivery Address: Westlake Conservation Centre, Westlake, 7945 Specifications Hiking Boots Must Includes A Waterproof Leather Upper Mustprovides Durability And Comfort. Dri-tec Waterproof, Breathable Membrane To Keep Feet Dry.mdt Outer Sole For All Terrain Support. Color Dark Chocolate. Altitude V Ultra Wide I Wp Men's Or Equivilent. 2 X Size 8 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation

* (10 X 1ml Ampoules) Formic Acid Specifications: Formic Acid Eluent Additive For Lc-ms; 3x 10 Ml Ampoules. That Is 3 Boxes Of The 10 Ml Ampoule. The Supplier Must Be Iso 9001 Certified . Contact Person: Ziboneni Godongwana Contact Numbers: 021 444 9144 Email Address:ziboneni.godongwana@capetown.gov.za Non Stock 1. Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. 2. Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** 3. Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent"

* Streetlight Ignitor - Type: High Pressure Soduim; Wattage Range: 70 - 400w; Voltage: 230v; Standards: Bearing The Sabs Mark 60927; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.

* Ga12500391 Bibs Specification: # Non-woven Polyester Bibs As Per Attached Images/artwork Green 20 10 Small, 5 Medium, 3 Large And 2 Xl Red 20 10 Small, 5 Medium, 3 Large And 2 Xl # Bibs Must Have Open Sides With Two Strings To Tie On The Side As Per Image/artwork # The Text Must Be Screen-printed Onto The Bibs # The City Of Cape Town Logo And Wording Should Be Centred And Layout As Per Image/artwork # City Of Cape Town Wording To Be Black On The Front And Back Of The Vest. We Require Samples Before Commencing With Final Product For More Information, Please Contact Lindie Buirski Lindie.buirski@capetown.gov.za Samples: We Definitely Need A Sample Please Address: The Sample Can Be Delivered To The Slec (map Attached) Contact Person: Cindy Jacobs (083 700 2211) Provider To Confirm Delivery Time And Date With Cindy First Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation

* # Description- Spec Gel Secondary Standard Kit-mr Chlorine; Dpd Speccheck Secondary Standards Kit For Mid Rangedpd Chlorine Methods. # Concentration- 0 - 4.0 Mg/l Ci2; Contains A Blank Vial And 3 Colored Vialsat ~0.2, ~1.6, And ~2.7 Mg/l Cl. # Quantity: Set Of 4 Vials: Ready-to-use Specchecksecondary Standards Kits Include Four 10 Ml (1 Inch) Sealedglass Cells With A Blank And Three Different Standards Within The Typical Testing Range, Instructions, Plastic Case And Certificate Of Analysis. # Speccheck Standards Must Have A Two-year Shelf Life From Date Of Manufacture. # Instrument: Compatible With The Dr900 And Dr6000 Quotation Conditions Clause - 2.14.1 & 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. · Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent# · Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Nb!!! Please Provide Sample Pictures And Specifications With Your Submission.