Cars Tenders

Details: The subject of the proceedings is the provision of vulcanization services in official vehicles used by the District Police Headquarters in Miechów. As part of the Subject of the Order, the Contractor undertakes to perform vulcanization services in company vehicles, i.e.: passenger cars (including SUVs) and commercial vehicles (including off-road vehicles), on wheels with aluminum and steel rims, as well as those with a tire pressure control system. Kolo. The scope of the service includes: - Comprehensive tire replacement, which should be understood as: removing the wheel from the vehicle, removing the tire from the rim, installing a tire appropriate to the season on the rim, equalizing the tire pressure and balancing the wheel mounted on the vehicle, installing the wheel on the vehicle, as well as If necessary, calibration of the wheel pressure sensor, - comprehensive replacement of complete wheels, which should be understood as: removing the wheel from the vehicle, equalizing the tire pressure and balancing the wheel that is to be mounted on the vehicle, installing the wheel on the vehicle, as well as if necessary Performing the Calibration of the Wheel Pressure Sensor, - wheel balancing, which should be understood as: removing the wheel from the vehicle, balancing the wheel, installing the wheel on the vehicle, - vulcanization repairs, which should be understood as: removing the wheel from the vehicle, repairing the damage (through, among others, patching) Tires, replacing valves, valves, sealing the rim seat), mounting the tire on the rim, equalizing the pressure, balancing the wheel and installing it on the vehicle, as well as, if necessary, calibrating the wheel pressure sensor. 4. The actual quantity and type of services provided will result from the actual needs of the Ordering Party. The Ordering Party reserves the right to increase the number of vulcanization repairs, but their total may not exceed the value specified in the contract. 5. The Ordering Party requires that the service point with technical facilities enabling the entire execution of the subject of the order be located within the administrative boundaries of the city of Miechów. 6. The Ordering Party will require the conclusion of an Agreement, the template of which constitutes Annex No. 2 to the Procedure. 7. The Ordering Party requires completing the Offer Form constituting Annex No. 1. Then, the completed Annex should be uploaded to the Purchasing Platform in the "attachments" tab, Add an Annex. 8. The Ordering Party reserves the right to resign from the subject of the order in the event that the amount allocated for the execution of the order is not fully covered by current police expenses, which will not constitute grounds for any claims on the part of the Contractor. In the Purchasing Platform Form, Enter the Gross Offer Value. Please submit all inquiries via the Purchasing Platform. In case of problems with submitting an offer, please contact the Eb2b Helpdesk - Contact in the footer of the website.

Details: Description Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 1 Lot Communications Equipment 2,200,000.00 6 Unit Base Radio, Ntc-type Approved Equipment, 136-174 Mhz Frequency Range, 50 Watts Maximum Output Power, Programmable To Ntc Assigned Frequency Specifications General A. Frequency Range - Uhf: 400-470mhz*; Vhf:136-174mhz B. Channel Capacity- 48 (16 Channels Per Zone) C. Zone Capacity - 3 D. Channel Spacing - 12.5/25khz E. Operating Voltage - 13.6 V ± 15% F. Current Drain - Standby: Around 0.3a Receive: < 1>1ghz G. Weight - 1100g H. Dimensions - 164 X 43 X150 Mm I. Frequency Stability - ±0.5 Ppm J. Antenna Impedance - 50ω Receiver A. Sensitivity - Analog: 0.3µv (12db Sinad); 0.22µv (typical) (12db Sinad); 0.4µv (20db Sinad) Digital: 0.3µv/bers5% B. Selectivity - Tia-603: 60db @ 12.5khz/ 70db @ 25khz Etsi: 60db @ 12.5khz/ 70db @ 25khz C. Intermodulation - Tia-603: 70db @ 12.5/25khz Etsi: 65db @ 12.5/25khz D. Spurious Response Rejection- Tia-603: 70db @ 12.5/25khz Etsi: 70db @ 12.5/25khz E. Blocking- Tia-603: 90db Etsi: 84db E. Hum And Noise- 40db @ 12.5khz; 45db @ 25khz F. Rated Audio Power Output- Internal (@ 16 Ohm Load): 4w External (@8 Ohm Load): 8w Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 1 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) G. Max Audio Power Output - Internal (@16 Ohm Load): 6w External (@ 8ohm Load): 12w H. Rated Audio Distortion - ≤3% I. Audio Response - +1~-3db J. Conducted Spurious Emission - <-57dbm Transmitter A. Rf Power Output – Low Power Version: 1-25w (uhf/vhf) High Power Version: 5-45w (uhf) / 5-50w (vhf) B. Fm Modulation – 11kof3e @ 12.5khz; 16k0fe @ 25 Khz’ C. 4fsk Digital Modulation – 12.5khz Data Only: 7k60fxd 12.5khz Data & Voice:7k60fxw D. Conducted/radiated Emission - -36dbm<1ghz>1ghz E. Modulation Limiting- ±205khz @ 12.5khz F. Fm Hum & Noise- 40db @ 12.5khz 45db @ 25khz G. Adjacent Channel Power- 60db @ 12.5khz; 70db @ 25khz’ H. Audio Response- +1 ~ -3db I. Audio Distortion- ≤3% J. Digital Vocoder Type- Ambe+2™ Or Selp K. Digital Protocol- Etsi-tsi02 361-1, -2, -3 1 Lot Engineering Plans And Services (professional Fee) 30 Unit Handheld Radio (vhf), Ntc Type Approved Equipment, 136-174mhz Frequency Range, 5 Watts' Maximum Out-put Power, Programmable To Ntc Award Frequency. Accessories: 1. Belt Clip 2. Standard Desk Charger 3. Rubber Duck Antenna 4. Manual General: A. Frequency Range- Uhf: 400-470 Mhz, Vhf:136-174mhz B. Channel Capacity - 128 C. Zone Capacity - 8 D. Zone Channel - 16 E. Channel Spacing - 12.5khz/20kh/25khz F. Operating Voltage -7.4v G. Battery - 1500mah (standard); 2000mah (optional) H. Battery Life - (5/5/90 Duty Cycle, High Tx Power) - Analog: 12h (1500mah), 16h (2000mah) - Digital: 16h (1500mah), 21h (2000mah) I. Frequency Stability - ±0.5ppm J. Antennal Impedance - 50ω K. Weight (with Antenna & Battery) -230g L. Dimensions (h X W X D) - 115 X 55 X 295mm M. Display - 1.77 Inch Tft Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 2 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) Receiver: A. Sensitivity - Digital: 0.18µv / Bers % Analog: 0.18µv(12db Sinad) B. Adjacent Channel Selectivity - Tia -603: 60db@12.5khz, 70db@20/25khz Etsi: 60db@12.5khz, 70db@20/25khz C. Intermodulation- Tia- 603:70db@12.5/20/25khz Etsi: 65db@12.5/20/25khz D.spurious Response Rejection- Tia -603: 70db@ 12.5/20/25khz Etsi: 70db@12.5/20/25khz E. Blocking - Tia -603:80db Etsi: 84db F. Hum And Noise- 40db@20khz, 45db@25khz G. Rated Audio Power Output - 1w H. Rated Audio Distortion - <3>1ghz E. Modulation Limiting - +2.5khz@12.5khz, +4.0khz@20khz, 15.0khz@25khz F. Fm Hum&noise - 40db@12.5khz, 43db@20khz, 45db@25khz G. Adjacent Channel Power- 60db@12.5khz, 70db@20/25khz H. Audio Response- +1 To -3db I. Audio Distorted - ≤% J. Digital Vocoder Type - Ambe +2™ Environmental: A. Operating Temperature - -30°~+60°c B. Storage Temperature - -40°c~+85°c C. Esd - Iec 61000-4.2 (level 4) ±8kv (contact); ±15kv(air) D. Dust And Water Intrusion - Iec60529-ip54 E. Humidity - Mil -std-810g F. Shock And Vibration - Mil-std-810g 1 Lot Installation Of Communication Equipment 1 Unit Mini Duplexer (vhf) -tuned To Working Frequency, 50 Watts 7 Unit Mobile Radio (vhf) - Ntc-approved Type (commercial), 50w, Programmable To Ntc Assigned Frequency Frequency Range 136-174 Mhz, With Magnetic Mount Mobile Antenna 6 Lot Ntc Permit To Purchase/possess And Radio Station License 6 (six) Units Base Radio 30 Lot Ntc Permit To Purchase/possess And Radio Station License For 30 (thirty) Units Handheld Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 3 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 Lot Ntc Permit To Purchase/possess And Radio Station License For 1 (one) Unit Repeater 7 Lot Ntc Permit To Purchase/possess And Radio Station License For 7 (seven) Mobile Radio 1 Lot Programming, Commissioning/propagation And Testing And Delivery (30 Days) Additional Requirements: * Provide A Network Diagram That Is Applicable To The Area * With History/experience In The Installation Of A Working Communication System In The Area *accredited With Ntc-car 1 Unit Repeater (vhf), Ntc-type Approved Equipment, 136-174 Mhz Frequency Range, 50 Watts Maximum Output Power, Programmable To Ntc Assigned Frequency. Specifications: General A. Frequency Range - Uhf 1: 400-470mhz; Uhf 2: 450-520mhz; Uhf 3: 350-400mhz; Vhf: 136-174 Mhz B. Channel Capacity - 16 C. Channel Spacing - 12.5khz/20khz/25 Khz D. Operating Voltage - 13.6v±15% E. Current Drain - Standby: ≤0.8a; Transmit:≤11a F. Frequency Stability - ± O.5ppm G. Antenna Impedance - 50ω H. Duty Cycle - 100% I. Dimensions (h X W X D) - 88 X 483 X 366 Mm J. Weight - 8.5 Kg K. Lcd Display - 220 X 176 Pixels, 262000 Colors; 2.0 Inch, 4 Rows Receiver A. Sensitivity - Analog: 0.28µv (12 Db Sinad); 0.22µv (typical) 12db Sinad) 0.4 Μv (20db Sinad) Digital: 0.3µv/ber5% B. Adjacent Channel Selectivity- Tia-603: 65db @ 12.5 Khz; 75 Db @20/25khz Etsi: 65 Db @ 12.5 Khz; 75 Db @ 20/25khz C. Intermodulation- Tia -603: 75db @ 12.5/20/25khz Etsi: 70db @ 12.5/20/25khz D. Spurious Response Rejection Tia-603: 80db @ 12.5/20/25khz Etsi: 80db @ 12.5/20/25khz E. Hum And Noise - 40db@ 12.5khz; 43db@20khz; 45db@25khz F. Rated Audio Power Output - 0.5w G. Rated Audio Distortion- ≤3% H. Audio Response - +1 ~ -3db I. Conducted Spurious Emission - <-57dbm Transmitter Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 4 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) A. Rf Power Output - 5-50w B. Fm Modulation - 11k0f3e @ 12.5khz; 14k0f3e @ 20khz; 16k0f3e @ 25 Khz C. 45sk Digital Modulation - 12.5khz Data Only: 7k60fxd; 12.5khz Data And Voice:7k60fxw D. Conducted/radiated Emission - -36dbm ≤ 1ghz; -30dbm > 1ghz E. Modulation Limiting - ±2.5khz @ 12.5 Khz; ±4.0khz @ 20khz; ±5.0khz @ 25khz F. Fm Hum & Noise - 40db @ 12.5khz; 43db @ 20khz; 45db @ 25khz G. Adjacent Channel Power - 60db @ 12.5khz; 70db @ 20/25khz H. Audio Response - +1 ~ -3db I. Audio Distortion - ≤3% J. Digital Vocoder Type - Ambe +2™, Selp, Nvoc, Comm K. Digital Protocol - Etsi-ts102 361-1, -2-, -3 Environmental Specifications A. Operating Temperature - -30°c ~+60°c B. Storage Temperature - -40°c ~ +85°c Accessories: 1. 1 Unit Tx Antenna (2 Elements Of Variloop Antenna) Cut, Fold And Tuned To Ntc Tx Assigned Frequency 2. 1 Unit Rx Antenna (2 Elements Of Variloop Antenna) Cut, Fold And Tuned To Ntc Tx Frequency 3. 100 M Coax Cable Rg-8 (japan) 4. 4 Pcs. Pi-259 Connector (good Quality) 5. Regulated Power Supply (13.8 V Dc/30 Amp) 6. With Pt Mask Antenna And Repeater Cabinet This Is A Lot Bidding, Partial Bids Are Not Allowed Please Indicate Brands Of Offers And Attach Technical Brochures In The Eligibility And Technical Proposal Please Indicate Unit Prices Of Offers In The Financial Proposal Bidders Must Possess Valid Mayor's/business Permit With A Relevant Line Of Business In The Supply, Delivery And Installation Of Communications Equipment For Use Of Bfp Under Pr No. 2 Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 5 Of 5

Details: The Order Includes The Provision Of On-demand Traffic “emil Taunusstein” In Area Operations, Hereinafter Referred To As “odv”. In Terms Of Approval, This Corresponds To Regular Scheduled Traffic In Accordance With Section 44 Pbefg. This Involves A Demand-oriented, Timetable-independent Transport Of People By The Operator Using Passenger Cars Ordered In Advance By The Passengers And Without A Fixed Route Between Certain Entry And Exit Points In The Operating Area Determined By The Client. Operation Of All Virtual Stopping Points In The Control Area: Https://www.google.com/maps/d/0/viewer?mid=1lfx6h_jur7lubull1dfs4ayhsolmkps&femb=1&ll=50.1583023410848%2c8.1966926373&z=13 The Order Includes. . Driving Staff, Disposition And Depot, The Procurement And Maintenance Of The Vehicles, As Well As The Provision Of The Necessary Software. Passengers' Travel Requests Are To Be Served As Promptly And Efficiently As Possible. The Waiting Times Should Be As Short As Possible. Travel Requests Are Booked Via The App (see On-demand Software). In Addition, The Operator Also Accepts Travel Requests By Telephone During Operating Hours. The Requirements For The On-demand Software Can Be Seen In The Appendix “http://ausscription.igdb.de/rtv/20240105_funktionalitaeten_odv_software.pdf”. The Odv Is Operated At The Following Times: Monday To Thursday: 5:30 A.m. - 10:30 P.m. Friday: 5:30 A.m. - 12:30 A.m. Saturday: 7:30 A.m. - 12:30 A.m. Sunday And Public Holidays: 8:30 A.m. - 22 :30 P.m. During Operating Hours, One To Two Vehicles Are In Use At The Same Time. From The Distribution Of The Service Time In The System “http://ausschreib.igdb.de/rtv/20240103_mindestsoll_betriebsstunden_odv_2025.pdf” There Is An Expected Total Of 9,058 Operating Hours In A Standard Year (250 Days Monday To Friday, 52 Saturdays And 63 Sundays And Public Holidays). , Of Which 4,875 Are In Daytime Traffic And 4,183 Are In Late-night And Weekend Traffic. Requirements For The Vehicles: The Vehicle Fleet Consists Of At Least Three Battery-electric Minibuses Or Minivans With A Maximum Of Nine Seats (including Driver's Seat) Per Vehicle. In Each Vehicle There Are At Least Five And Up To Seven Passenger Seats In The Passenger Compartment. The Front Rows Of Seats In The Passenger Compartment Have A Maximum Of Two Seats And Only The Last Row Of Seats Has Up To Three Seats, So That It Is Possible To Climb Through To The Rear Without Folding Down The Seats. Passenger Seats Are Not Counted Or Used As Passenger Seats. At Least Two Of The Vehicles Have A Barrier-free Parking Space For Wheelchairs With Devices To Properly Secure Passengers. If The Wheelchair Space Is Used, The Number Of Additional Passenger Seats In The Vehicle May Be Temporarily Reduced To Three. All Vehicles Have A Step On The Side Door To Make It Easier For Passengers To Get In. The Common Conditions Of Carriage Of The Rhein-main-verkehrsverbund (gb-rmv) Apply On-demand Transport In The Rhine-main Transport Association Https://www.rmv.de/c/de/fahrkarten/infos-regelen/on-demand-verkehre-befoerderung-und-tarif.

Details: The subject of the construction work is the modernization of the existing building of the fire station. The modernization includes the insulation of the entire building, the raising of the roof structure and minor modifications to the internal layout. The building will be used in the existing way, namely as a fire station. The building has a floor plan in the shape of LO with a total area of 519.0 m2 with a hipped roof over the garage part and a gable roof over the administrative part. The building is located on flat terrain. The armory has two floors above ground. This is the administrative part, two-story, where the corridors with a staircase, the warning technology room, SDH warehouses, a gym, a workshop, SDH locker rooms, social facilities and a washroom are located in the I.np. In Ii.np There Is A Corridor, A Commander's Office, A Kitchenette And A Vocational Training Classroom. In The Second One-Story Part Of The Object, There Are Two Built-In Garages For Three And One Parking Spaces For Vehicles Of Group 2 SDH. For Liquid Fuels And A Storage Room For Garden Tools. Garages For SDH Cars Must Correspond With Their Dimensions And Entrance Gates To Čsn 73 5710 According To The Type Of SDH Vehicle. Furthermore, The Entrance Gates To Existing Garages Will Be Replaced, The Internal Installations In The Object Will Be Repaired, The Internal Walls And Plaster Will Be Repaired. The construction is divided into the following construction objects: So-01 – Fire Station So-02 – Gas Pipeline Connection The Client assumes, for operational reasons, the construction will be divided into 2 stages, namely: Stage 1 – Garage Spaces with Facilities Necessary for the Unit's Operational Capability Stage 2 – Main Building However, the construction procedure in relation to maintaining the unit's operational capability and the operation of the fire station building will be discussed and defined in detail with the winning bidder before the start of construction. The Client draws attention to the fact that the construction will be carried out during operation, while complying with the conditions set out below by the user – the Volunteer Fire Department Unit (hereinafter referred to as "JSDH"): The JSDH's operational capability must be maintained (response); For the purposes of preparing the construction site, it is possible to be without electricity and water for a maximum of 2 – 3 days. The selected supplier must contact the Jsdh commander by phone at least 2 days in advance (so that it is possible to arrange services for the preparation of equipment). The object must have: - lighting and electricity connections, - a construction switchboard with a 2x380v socket connection and at least 4x220v, - an air connection for equipment from the garage area must be ensured - for a transitional period and under suitable climatic conditions, it is assumed that emergency vehicles will be parked in a neighboring public area, the construction site equipment must allow for the parking and exit of these vehicles. - in the event of negative outdoor air temperatures, the parking of emergency vehicles in garages must be allowed. The subject of the public contract is described in detail in: - the construction project documentation (constitutes Annex No. 7 to this call); - List of Construction Works, Supplies and Services with Addressed Statement of Measurements (constitutes Annex No. 8 to this Call);

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman

Details: Description Invitation To Bid For The Supply And Delivery Of Various Common-used Office Supplies 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2025 Intends To Apply The Sum Of Six Million Two Hundred Ninety-four Thousand One Hundred Twenty-two Pesos And Fifty Centavos (php6,294,122.50) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Supply And Delivery Of Various Common-used Office Supplies With Project Identification Number Da-rfo 1-2025-goods-033. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Item No. Specifications Qty. Unit Unit Cost Total Cost 1 Automatic Voltage Regulator (avr), 3000w 4 Unit 5,500.00 22,000.00 2 Battery Charger For Aa & Aaa, With Aa Rechargeable Battery 54 Pc 1,700.00 91,800.00 3 Battery, Aa, Alkaline, 4pcs/pack 132 Pack 90.00 11,880.00 4 Battery, Aa, Rechargeable 2pcs/pack (2450 Mah) 63 Pack 700.00 44,100.00 5 Battery, Aaa, Alkaline 4pcs/pack 141 Pack 120.00 16,920.00 6 Battery, Aaa, Rechargeable 2pcs/pack (800 Mah) 9 Pack 500.00 4,500.00 7 Cfl Bulb 18 Watts 59 Pc 200.00 11,800.00 8 Extension Outlet 4 Gang W/ Switch (1.5m) 18 Unit 950.00 17,100.00 9 Flashlight, Rechargeable 5 Pc 400.00 2,000.00 10 Laser Pointer Presenter 7 Pc 800.00 5,600.00 11 Led, Lightbulb (daylight 9 Watt) 70 Pc 200.00 14,000.00 12 Tape, Electrical, 19mm X 16mm 32 Pc 60.00 1,920.00 13 Universal Extension Wheel (10m) 12 Unit 2,200.00 26,400.00 14 Universal Outlet Extension Cord, 6 Gang W/ Switch, 2-3 Meters Cord Length 17 Unit 1,200.00 20,400.00 15 Alcohol (500ml, Isoprophyl 70%) 343 Bot 110.00 37,730.00 16 Alcohol (gal, Isoprophyl 70%) 46 Gal 600.00 27,600.00 17 Ballpen, 0.5mm, Fine Black 4193 Pc 10.00 41,930.00 18 Ballpen, 0.5mm, Fine Blue 2616 Pc 10.00 26,160.00 19 Ballpen, 0.5mm, Fine Red 139 Pc 10.00 1,390.00 20 Ballpen, 0.7mm, Fine, Black 1188 Pc 12.00 14,256.00 21 Ballpen, 0.7mm, Fine, Blue 1142 Pc 12.00 13,704.00 22 Ballpen, 0.7mm, Fine, Red 50 Pc 12.00 600.00 23 Ballpen, Bp-s Fine, Black 679 Pc 25.00 16,975.00 24 Ballpen, Bp-s Fine, Blue 406 Pc 25.00 10,150.00 25 Ballpen, Bp-s Fine, Red 174 Pc 25.00 4,350.00 26 Bank Envelope (11 X 7 Inch) 75 Pc 3.50 262.50 27 Bond Paper, (11"x17") Tabloid Size, Subs 24 / 80 Gsm 20 Ream 550.00 11,000.00 28 Bond Paper, (8.5x11) Letter, Subs 20 / 70 Gsm 78 Ream 280.00 21,840.00 29 Bond Paper, (8.5x11) Letter, Subs 24 / 80 Gsm 49 Ream 320.00 15,680.00 30 Bond Paper, (8.5x13) Legal, Subs 20 / 70 Gsm 686 Ream 300.00 205,800.00 31 Bond Paper, (8.5x13) Legal, Subs 24 / 80 Gsm 490 Ream 350.00 171,500.00 32 Bond Paper, A3, Subs. 20 / 70 Gsm 50 Ream 465.00 23,250.00 33 Bond Paper, A3, Subs. 24 / 80 Gsm 20 Ream 530.00 10,600.00 34 Bond Paper, A4, Subs 20 / 70 Gsm 904 Ream 290.00 262,160.00 35 Bond Paper, A4, Subs 24 / 80 Gsm 558 Ream 330.00 184,140.00 36 Book Ends, Metal 5 Pair 200.00 1,000.00 37 Carbon Paper, Long 2 Pack 195.00 390.00 38 Cartolina, White, 20pcs/pack 15 Pack 90.00 1,350.00 39 Certificate Holder, A4 Size W/ Plastic Cover 623 Pc 50.00 31,150.00 40 Clear Folder, Morocco Long, Blue 30 Book 22.00 660.00 41 Clear Folder, Morocco Short, Blue 10 Book 20.00 200.00 42 Clearbook Refil, 20 Holes, 10pcs/pack 10 Pack 50.00 500.00 43 Clip Board, Data Board. 8.5"x11" 22 Pc 90.00 1,980.00 44 Clip Board, Data Board. 8.5"x13" 148 Pc 100.00 14,800.00 45 Clip, Bulldog 2" 344 Pc 8.00 2,752.00 46 Clip, Bulldog 3'' 324 Pc 15.00 4,860.00 47 Colored Paper 8 1/2 X 11" 10's/pack 22 Pack 30.00 660.00 48 Colored Paper, A4, Light Blue 37 Ream 200.00 7,400.00 49 Columnar Notebook, 10 Cols 10 Pad 35.00 350.00 50 Columnar Notebook, 12 Cols 18 Pad 35.00 630.00 51 Construction Paper (assorted) 10 Sheets Per Pack 40 Pack 30.00 1,200.00 52 Corkboard, 2x3 Ft 2 Pc 900.00 1,800.00 53 Corkboard, 3ft X 4 Ft 1 Pc 2,000.00 2,000.00 54 Correction Pen 70 Pc 20.00 1,400.00 55 Correction Tape 5mm X 8m 562 Pc 30.00 16,860.00 56 Cotton (500 Grams) 1 Roll 150.00 150.00 57 Crayons, 8 Colors 12 Pack 20.00 240.00 58 Cutter Blade, Big 12 Box 30.00 360.00 59 Cutter, Heavy Duty 46 Pc 100.00 4,600.00 60 Dating And Stamping Machine, Self Inking (dated 2024 And Up) 42 Pc 500.00 21,000.00 61 Envelope, Ordinary, Long Brown 1525 Pc 4.00 6,100.00 62 Envelope, Ordinary, Short Brown 243 Pc 3.00 729.00 63 Eraser (for Pencil) 161 Pc 15.00 2,415.00 64 Expanding Envelope, Kraft, Legal Size 335 Pc 15.00 5,025.00 65 Expanding Envelope, Hard Plastic With Garter (pvc Type), Legal Size 76 Pc 90.00 6,840.00 66 Expanding Envelope, Plastic Long (thick) 230 Pc 35.00 8,050.00 67 Expanding Envelope, Plastic Long With Handle 355 Pc 90.00 31,950.00 68 File Box W/ Cover (blue) 233 Pc 410.00 95,530.00 69 File Box W/ Cover (red) 136 Pc 410.00 55,760.00 70 File Rack, 3 Layers, Heavy Duty 24 Pc 500.00 12,000.00 71 Film Index (with Sign Here Note) 219 Pack 55.00 12,045.00 72 Film Index Rainbow Color 158 Pack 45.00 7,110.00 73 Folder Expanding, Legal Size (green, Glossy) 1574 Pc 18.00 28,332.00 74 Folder Expanding, Short (green, Glossy) 50 Pc 15.00 750.00 75 Folder Long Ordinary, Kraft, Thick 1196 Pc 6.00 7,176.00 76 Folder Long Ordinary, White, Thick 3869 Pc 6.00 23,214.00 77 Folder Plastic Clear W/ Slide (a4) (thick Plastic) 66 Pc 35.00 2,310.00 78 Folder Plastic Clear W/ Slide (legal) (thick Plastic) 178 Pc 40.00 7,120.00 79 Folder, Morocco, Legal (blue) Not Glossy 140 Pc 25.00 3,500.00 80 Folder, Morocco, Legal (green) Not Glossy 92 Pc 25.00 2,300.00 81 Folder, Morocco, Short (blue) Not Glossy 107 Pc 18.00 1,926.00 82 Folder, Morocco, Short (green) Not Glossy 35 Pc 18.00 630.00 83 Glue Gun Heavy Duty Big 8 Pc 360.00 2,880.00 84 Glue Stick, Big 102 Pc 12.00 1,224.00 85 Glue, Multi-purpose 240 Grams 12 Bot 150.00 1,800.00 86 Highlighter, Blue 55 Pc 40.00 2,200.00 87 Highlighter, Green 95 Pc 40.00 3,800.00 88 Highlighter, Orange 83 Pc 40.00 3,320.00 89 Highlighter, Pink 78 Pc 40.00 3,120.00 90 Highlighter, Yellow 91 Pc 40.00 3,640.00 91 I.d. Holder W/ Lace 4"x6" 100 Pc 45.00 4,500.00 92 Illustration Board, 1 Whole 15 Pc 70.00 1,050.00 93 Index Card (3"x5") 50s/pack 24 Pack 45.00 1,080.00 94 Laminating Film A4 Size 100pcs/pack 250 Mic 34 Pack 1,200.00 40,800.00 95 Lead, For Mechanical Pencil 0.5mm 12pc/tube 2 Tube 30.00 60.00 96 Lever Arch File, Blue, File Top, Size: Approx. (11 X 13.5 X 2.5 Inches) 20 Pc 195.00 3,900.00 97 Lever Arch File, Blue, Landscape, Size: Approx. (11 X 13.5 X 2.5 Inches) 40 Pc 195.00 7,800.00 98 Lever Arch File, Blue, Size: Approx. (15.5 X 9.5 X 3 Inches) 45 Pc 195.00 8,775.00 99 Magazine File Box (5"x9"x15-3/4") 60 Pc 110.00 6,600.00 100 Mailing Envelope, White, 500pcs/box 18 B0x 290.00 5,220.00 101 Manila Paper 1 Whole 276 Sheet 5.00 1,380.00 102 Marker Permanent Ink Refill 30ml, Black (pilot) 36 Bot 110.00 3,960.00 103 Marker Permanent Ink Refill 30ml, Blue (pilot) 32 Bot 110.00 3,520.00 104 Notebook (80 Leaves) 1040 Pc 45.00 46,800.00 105 Official Record Book (300 Pages) Aprox. Size: (8.5 X 11) 73 Book 250.00 18,250.00 106 Official Record Book (500 Pages) Aprox. Size: (8.5 X 11) 100 Book 280.00 28,000.00 107 Paper Cutter With Board, Wood Base, 12x15 3 Unit 1,200.00 3,600.00 108 Paper Cutter,steel Base W/ Ruler & Presser 15'x12' 1 Unit 2,000.00 2,000.00 109 Paper Fastener (plastic) 100 Box 40.00 4,000.00 110 Paper Fastener, (metal) 207 Box 70.00 14,490.00 111 Paper, Ruled Pad, 90 Leaves (yellow Pad) 35 Pad 45.00 1,575.00 112 Parchment Paper, Long, 10sheets/pack (cream) 48 Pack 35.00 1,680.00 113 Parchment Paper, Short, 10sheets/pack (cream) 58 Pack 30.00 1,740.00 114 Paste With Applicator, 200 Grams 4 Jar 80.00 320.00 115 Pencil With Eraser No.2 (12pcs/box) 212 Box 72.00 15,264.00 116 Pencil, Mechanical, 0.5mm Lead 56 Pc 47.75 2,674.00 117 Permanent Marker (black) (bullet Type) (super Color Marker) 225 Pc 45.00 10,125.00 118 Permanent Marker (black) (chisel Type) (super Color Marker) 174 Pc 55.00 9,570.00 119 Permanent Marker (blue) (bullet Type) (super Color Marker) 195 Pc 45.00 8,775.00 120 Permanent Marker (blue) (chisel Type) (super Color Marker) 117 Pc 55.00 6,435.00 121 Permanent Marker (red) (bullet Type) (super Color Marker) 57 Pc 45.00 2,565.00 122 Permanent Marker (red) (chisel Type) (super Color Marker) 70 Pc 55.00 3,850.00 123 Philippine National Flag, Size: 90cm X 150cm 12 Pc 102.00 1,224.00 124 Photo Paper, Glossy, A4, 20pcs/pack 67 Pack 150.00 10,050.00 125 Plastic Twine, One Kilo Per Roll 18 Roll 80.00 1,440.00 126 Puncher, Heavy Duty, 2 Holes 12 Unit 200.00 2,400.00 127 Push Pin, Hammer Head Type, Assorted Colors, 100s/box 13 Box 50.00 650.00 128 Ring Binder, 1" 5 Pc 45.00 225.00 129 Ring Binder, 1/2 " 5 Pc 20.00 100.00 130 Rotary Pencil Sharpener 2 Pc 300.00 600.00 131 Rubber Band, Large Size 15 Box 150.00 2,250.00 132 Ruler Metal 12 Inch 9 Pc 50.00 450.00 133 Ruler Plastic 12 Inch 5 Pc 20.00 100.00 134 Scissors Heavy Duty Big 8" (stainless) 63 Pair 120.00 7,560.00 135 Screw Fastener 3" 438 Pc 10.00 4,380.00 136 Screw Fastener 4" 357 Pc 12.00 4,284.00 137 Sign Pen V5, Black 415 Pc 55.00 22,825.00 138 Sign Pen V5, Blue 387 Pc 55.00 21,285.00 139 Sign Pen V5, Green 55 Pc 55.00 3,025.00 140 Sign Pen, 1.0mm, Black 177 Pc 75.00 13,275.00 141 Sign Pen, 1.0mm, Blue 146 Pc 75.00 10,950.00 142 Sign Pen, Black Pentel Gel Type 0.5 539 Pc 95.00 51,205.00 143 Sign Pen, Blue Pentel Gel Type 0.5 400 Pc 95.00 38,000.00 144 Specialty Board, Cream, 8.5x11, 10pcs/pack (b-board) 673 Pack 35.00 23,555.00 145 Specialty Board, Cream, 8.5x13, 10pcs/pack (b-board) 648 Pack 40.00 25,920.00 146 Specialty Board, White, 8.5x11, 10pcs/pack (b-board) 225 Pack 35.00 7,875.00 147 Specialty Board, White, 8.5x13, 10pcs/pack (b-board) 408 Pack 40.00 16,320.00 148 Stamp Pad Ink Black 50ml 13 Pc 45.00 585.00 149 Stamp Pad Ink Red 50ml 4 Pc 45.00 180.00 150 Stamp Pad Ink Violet 50ml 23 Pc 45.00 1,035.00 151 Stamp Pad Standard Size Black 7 Pc 40.00 280.00 152 Stamp Pad Standard Size Violet 4 Pc 40.00 160.00 153 Staple Wire #35 297 Box 40.00 11,880.00 154 Stapler, #35 Heavy Duty With Staple Remover 57 Unit 400.00 22,800.00 155 Stapler, Long Reach Heavy Duty 3 Unit 500.00 1,500.00 156 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack) A4size 75 Pack 95.00 7,125.00 157 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack), Long 123 Pack 100.00 12,300.00 158 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack), Short 55 Pack 90.00 4,950.00 159 Sticky Notes (2"x1.5") 100 Sheets/pad 126 Pad 25.00 3,150.00 160 Sticky Notes (2"x2"), 100 Sheets/pad 141 Pad 30.00 4,230.00 161 Sticky Notes (3"x2"), 100 Sheets/pad 127 Pad 40.00 5,080.00 162 Sticky Notes (3"x3"), 100 Sheets/pad 222 Pad 40.00 8,880.00 163 Sticky Notes (3"x4), 100 Sheets/pad 158 Pad 50.00 7,900.00 164 Sticky Notes (3"x5"), 100 Sheets/pad 215 Pad 50.00 10,750.00 165 Super Glue / Shoe Glue 3 Grams 6 Pc 50.00 300.00 166 Super Permanent Marker, Fine Black (industrial) (sharpie) 35 Pc 90.00 3,150.00 167 Tape Dispenser, Heavy Duty (1") 9 Pc 150.00 1,350.00 168 Tape Double Sided Thin 24mm White 95 Pc 40.00 3,800.00 169 Tape Double Sided Adhesive W/ Foam Green, 2" 94 Roll 230.00 21,620.00 170 Tape Double Sided Adhesive W/ Foam Green, 1" 84 Roll 150.00 12,600.00 171 Tape Duct, Color Blue 2" 62 Roll 110.00 6,820.00 172 Tape Duct, Color Grey 2" 78 Roll 110.00 8,580.00 173 Tape, Masking, 1/2" 47 Roll 21.00 987.00 174 Tape, Masking, 24mm, 1", 100m 95 Roll 35.00 3,325.00 175 Tape, Masking, 48mm, 2", 100m 301 Roll 70.00 21,070.00 176 Tape, Packaging, 48mm, 2", 100m 88 Roll 55.00 4,840.00 177 Tape, Transparent, 24mm, 1", 100m 170 Roll 30.00 5,100.00 178 Tape, Transparent, 48mm, 2", 100m 126 Roll 52.00 6,552.00 179 Tracing Paper, Per Cut, 20x30, 8085 Thick 2 Pc 20.00 40.00 180 Whiteboard, 3ft X 4ft 7 Pc 2,000.00 14,000.00 181 Whiteboard, 5ft X 3ft 6 Pc 2,800.00 16,800.00 182 Air Freshener, 280ml (lemon Fresh) 163 Can 240.00 39,120.00 183 Air Freshener, Scented Gel, 180 Grams 98 Pc 220.00 21,560.00 184 Bathroom Cleaner (approx. 900ml) 29 Bot 300.00 8,700.00 185 Bathroom Soap, 90 Grams 16 Pc 50.00 800.00 186 Bleach Colored 1 Ltr 62 Bot 130.00 8,060.00 187 Bleach White 1 Ltr 63 Bot 100.00 6,300.00 188 Broom, Ceiling, Bamboo 23 Pc 170.00 3,910.00 189 Broom, Soft 5 Pc 170.00 850.00 190 Broom, Stick 14 Pc 40.00 560.00 191 Car Freshener 42 Grams, Organic Canister, Assorted Scent 63 Can 240.00 15,120.00 192 Detergent Bar, Long 12 Bar 80.00 960.00 193 Detergent Powder, W/ Fabric Conditioner 1kg 43 Pack 150.00 6,450.00 194 Dishwashing Liquid (250ml) 402 Bot 70.00 28,140.00 195 Disinfectant Spray, 170g 89 Can 280.00 24,920.00 196 Door Mat, Cloth Rectangle 105 Pc 60.00 6,300.00 197 Dust Pan, Plastic Big 2 Pc 80.00 160.00 198 Fabric Conditioner 800 Ml 14 Bot 250.00 3,500.00 199 Face Towel (cotton), Good Morning 159 Pc 30.00 4,770.00 200 Floor Mop With Bucket (360degrees Rotating Micro Fiber Head) 3 Set 1,500.00 4,500.00 201 Furniture Cleaner, 300ml 32 Can 300.00 9,600.00 202 Garbage Bag, Black, Gusseted Type Thick Plastic, 10's/roll, (small) 55 Roll 70.00 3,850.00 203 Garbage Bag, Black, Thick Plastic, 10's/pack, (large), Heavy Duty 145 Pack 100.00 14,500.00 204 Garbage Bag, Black, Thick Plastic, 10's/pack, (xl) Heavy Duty 37 Pack 130.00 4,810.00 205 Garbage Bag, Black, Thick Plastic, 10's/pack, (xxl) Heavy Duty 239 Pack 150.00 35,850.00 206 Garbage Bag, Black, Thick Platic, 10's/pack, (medium), Heavy Duty 168 Pack 80.00 13,440.00 207 Glass Cleaner, Big Sprayer Type 7 Bot 197.00 1,379.00 208 Glass Squeezer W/ Handle 1 Pc 125.00 125.00 209 Hand Sanitizing Gel, 60ml 15 Bot 60.00 900.00 210 Insecticide Spray (aerosol) 400ml 73 Can 350.00 25,550.00 211 Laundry Brush 4 Pc 30.00 120.00 212 Laundry Gloves (medium) 1 Pc 200.00 200.00 213 Liquid Handwash (antibacterial) 400ml 123 Bot 140.00 17,220.00 214 Microfiber, Cleaning Cloth 35cm X 35cm 47 Pc 60.00 2,820.00 215 Mop W/ Squeezer (squeez Mop) 26 Pc 350.00 9,100.00 216 Pail W/ Cover (16l) 18 Pc 200.00 3,600.00 217 Paper Towel, Interfold 144 Pack 120.00 17,280.00 218 Push Brush (floor Brush) 20 Pc 130.00 2,600.00 219 Scrub Sponge, Heavy Duty 116 Pc 60.00 6,960.00 220 Scrubbing Pads, Heavy Duty 25 Pc 40.00 1,000.00 221 Table Napkin, Pre Folded 13 Pack 100.00 1,300.00 222 Tissue Paper, 2-ply, 12 Rolls/pack 422 Pack 180.00 75,960.00 223 Tissue Paper, 3-ply, @ 4rolls/pack 213 Pack 160.00 34,080.00 224 Toilet Bowl Brush W/ Box 57 Pc 92.00 5,244.00 225 Toilet Bowl Pump 2 Pc 60.00 120.00 226 Toilet Deodorant Cake, 50 Grams 108 Pc 50.00 5,400.00 227 Trash Bin, Plastic W/ Cover, 11l Capacity 6 Pc 150.00 900.00 228 Trash Bin, Plastic W/ Cover, 25l Capacity 1 Pc 250.00 250.00 229 White Facial Tissue (200mmx200mm)2ply 210 Box 110.00 23,100.00 230 Cd Rewritable, 700mb 80min. W/ Case 603 Pc 50.00 30,150.00 231 Dvd-rewritable W/ Case 6 Pc 90.00 540.00 232 External Hard Drive (1 Tb) Usb 3.0 27 Unit 4,700.00 126,900.00 233 External Hard Drive, Ssd (1 Tb) Usb 3.0/type C 15 Unit 6,000.00 90,000.00 234 Flash Drive , Usb 16gb, Plug In Play 3 Pc 490.00 1,470.00 235 Flash Drive, 32gb Ultra Usb Driver (otg); Micro-usb & Usb Connectors 42 Pc 1,300.00 54,600.00 236 Flash Drive, Usb 32 Gb 31 Pc 1,000.00 31,000.00 237 Flash Drive, Usb 64 Gb 119 Pc 1,500.00 178,500.00 238 Hdmi Cable, 10m 5 Pc 600.00 3,000.00 239 Hdmi Cable, 5m 3 Pc 300.00 900.00 240 Keyboard, Usb Type 36 Pc 450.00 16,200.00 241 Keyboard, Wireless 5 Pc 600.00 3,000.00 242 Microsd Memory Card, 32gb 1 Pc 1,000.00 1,000.00 243 Microsd Memory Card, 64gb 2 Pc 1,800.00 3,600.00 244 Mouse Optical, (usb) 15 Pc 300.00 4,500.00 245 Mouse For Laptop, Optical 50 Pc 440.00 22,000.00 246 Mouse Optical, Wireless 21 Pc 630.00 13,230.00 247 Mouse Pad 119 Pc 30.00 3,570.00 248 Powerbank 10000mah 5 Pc 1,500.00 7,500.00 249 Powerbank 20000mah 50 Pc 2,500.00 125,000.00 250 Uninterruptible Power Supply (ups), 500va - 600va 12 Pc 4,500.00 54,000.00 251 Usb Hub, 3.0, 4 Port 5 Pc 500.00 2,500.00 252 Usb Lan Wireless Adapter 8 Unit 1,000.00 8,000.00 253 Wireless Usb Presenter 2 Unit 2,200.00 4,400.00 254 Ink Brother, Bt5000m, Magenta 36 Bottle 490.00 17,640.00 255 Ink Brother, Bt5000m, Yellow 36 Bottle 490.00 17,640.00 256 Ink Brother, Bt5000m, Cyan 41 Bottle 490.00 20,090.00 257 Ink Brother, Bt6000m, Black 30 Bottle 490.00 14,700.00 258 Ink Cartridge, Canon Cl-36, Colored (for Canon Mobile Printer) 13 Cart 1,600.00 20,800.00 259 Ink Cartridge, Canon Cl-811 Colored 3 Cart 2,000.00 6,000.00 260 Ink Cartridge, Canon Pg-35, Black (for Canon Mobile Printer) 10 Cart 1,100.00 11,000.00 261 Ink Cartridge, Canon Pg-810 (canon) 3 Cart 1,900.00 5,700.00 262 Ink Cartridge, Hp62, Black (hp Office Jet 200 Mobile Printer) 5 Cart 1,500.00 7,500.00 263 Ink Cartridge, Hp62, Tricolor (hp Office Jet 200 Mobile Printer) 5 Cart 1,800.00 9,000.00 264 Ink, Hp Gt 51 Black 2 Bottle 400.00 800.00 265 Ink, Hp Gt 52 Cyan 2 Bottle 400.00 800.00 266 Ink, Hp Gt 52 Magenta 2 Bottle 400.00 800.00 267 Ink, Hp Gt 52 Yellow 2 Bottle 400.00 800.00 268 Ink Epson T6731 Black (epson) 6 Bottle 800.00 4,800.00 269 Ink Epson T6732 Cyan (epson) 6 Bottle 800.00 4,800.00 270 Ink Epson T6733 Magenta (epson) 6 Bottle 800.00 4,800.00 271 Ink Epson T6734 Yellow (epson) 6 Bottle 800.00 4,800.00 272 Ink Epson T6735, Light Cyan (epson) 3 Bottle 800.00 2,400.00 273 Ink Epson T6736, Light Magenta (epson) 3 Bottle 800.00 2,400.00 274 Ink Epson, T6641, Black 70ml 22 Bottle 450.00 9,900.00 275 Ink Epson, T6642, Cyan 70ml 9 Bottle 450.00 4,050.00 276 Ink Epson, T6643, Magenta 70ml 13 Bottle 450.00 5,850.00 277 Ink Epson, T6644, Yellow 70ml 14 Bottle 450.00 6,300.00 278 Ink Epson, 001, Black 179 Bottle 700.00 125,300.00 279 Ink Epson, 001, Cyan 138 Bottle 600.00 82,800.00 280 Ink Epson, 001, Magenta 138 Bottle 600.00 82,800.00 281 Ink Epson, 001, Yellow 137 Bottle 600.00 82,200.00 282 Ink Epson, 003, Black 679 Bottle 500.00 339,500.00 283 Ink Epson, 003, Cyan 465 Bottle 500.00 232500 284 Ink Epson, 003, Magenta 483 Bottle 500.00 241,500.00 285 Ink Epson, 003, Yellow 451 Bottle 500.00 225500 286 Ink Epson, 008, Black 37 Bottle 1,200.00 44,400.00 287 Ink Epson, 008, Cyan 28 Bottle 900.00 25,200.00 288 Ink Epson, 008, Magenta 29 Bottle 900.00 26,100.00 289 Ink Epson, 008, Yellow 29 Bottle 900.00 26,100.00 290 Toner Cartridge, Fuji Xerox S1810/s2010/s2220/s2420 (ct201911) 3 Cart 5,400.00 16,200.00 291 Toner Cartridge, Fuji Xerox S2011/s2320/s2520 (ct202384) 1 Cart 5,400.00 5,400.00 292 Toner Cartridge, Hp Laserjet P1102, Ce285a (85a) 25 Cart 5,000.00 125,000.00 293 Toner Cartridge, Kyocera (tk 1175) Monochrome 4 Cart 9,500.00 38,000.00 294 Toner Cartridge, Sharp Ar-6026n (mx-238ft) 5 Cart 9,500.00 47,500.00 295 Toner Cartridge, Lexmark (mx321) 2 Cart 10,000.00 20,000.00 296 Hp Color Laserjet Toner 206a, Black 7 Cart 9,500.00 66,500.00 297 Hp Color Laserjet Toner 206a, Cyan 1 Cart 9,500.00 9,500.00 298 Hp Color Laserjet Toner 206a, Magenta 1 Cart 9,500.00 9,500.00 299 Hp Color Laserjet Toner 206a, Yellow 1 Cart 9,500.00 9,500.00 300 Ink Brother Btd60bk 8 Bottle 510.00 4,080.00 301 Certificate Holder, Legal Size W/ Plastic Cover 400 Pc 60.00 24,000.00 302 Specialty Board, Cream, A4 8.2x11.7, 10pcs/pack (b-board) 300 Pack 30.00 9,000.00 303 Specialty Board, White, A4 8.2x11.7, 10pcs/pack (b-board) 105 Pack 30.00 3,150.00 304 Ink Cartridge, Hp 682, Black 3 Cart 550.00 1,650.00 305 Ink Cartridge, Hp 682, Tri-color 3 Cart 550.00 1,650.00 306 Index Card (5"x8") 50s/pack 3 Pack 65.00 195.00 307 Screw Fastener 1" 200 Pc 7.00 1,400.00 308 Screw Fastener 2" 198 Pc 8.00 1,584.00 309 Plastic Fastener (5 Pcs/pack) Double Lock 220 Pack 25.00 5,500.00 310 Notebook, A6 Size, 200 Pages 115 Pc 60.00 6,900.00 311 Notebook, A7 Size, 200 Pages 100 Pc 50.00 5,000.00 312 Usb 3.1 Otg Flashdrive, Type C, 128 Gb 51 Pc 3,000.00 153,000.00 313 Notebook, A5 Size, Soft Leather Cover, 200 Sheets 80 Pc 200.00 16,000.00 314 Gel Ink Sign Pen, 0.4 100 Pc 90.00 9,000.00 315 Gel Ink Sign Pen, 0.3 100 Pc 90.00 9,000.00 316 Toner Cartridge, Fujifilm Apeos 2150 Nda 5 Cart 3,500.00 17,500.00 317 Whiteboard 2ft X 2 Ft 2 Piece 2,000.00 4,000.00 318 Clamp - Stapler Remover 5 Pcs 30.00 150.00 319 Portable Bluetooth/wireless Speaker With Trolley (free Microphone) 1 Unit 6,695.00 6,695.00 320 Dishwashing Liquid Diy Kit, Lemon Scent (for 15-16 Liters Output) 25 Set 400.00 10,000.00 321 Fabric Conditioner Diy Kit, Sunrise Fresh Scent (for 20 Liters Output) 25 Set 450.00 11,250.00 322 Liquid Handsoap Diy Kit, Antibac Scent (for 15-16 Liters Output) 25 Set 400.00 10,000.00 323 Sack For 50kls Capacity (size: 64cm X 104cm) 76 Pc 15.00 1,140.00 324 Printer Ribbon, Epson Lq 310 2 Cart 250.00 500.00 325 Stackable Storage Box With Cover And Wheels (155l) 3 Pcs 1,100.00 3,300.00 Total 6,294,122.50 Delivery Schedule: Delivery Schedule: Sixty (60) Working Days From Receipt Of Ntp Drop-off Point: Da-rfo 1, City Of San Fernando, La Union Delivery Of The Goods Is Required Within Sixty (60) Working Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From January 7-27, 2025 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 14 January 2025, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 27 January 2025, 3:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 27 January 2025, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ January 6, 2025 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-033

Details: Description Republic Of The Philippines Department Of Health Caraga Regional Hospital Surigao City Bids And Awards Committee Ooooooo --------------------------------------------------------------------------------------------------------------- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Invitation To Bid Ib No. 2024-01-21 (115) Supply And Delivery Of Various Equipment For Calibration Services - Rebid Abc: ₱ 4,800,000.00 ========================================================= 1. The Caraga Regional Hospital (crh), Through The Fy2024 Internally Generated Fund (igf) Intends To Apply The Sum Of Being The Approved Budget For The Contract (abc) Of Four Million Eight Hundred Thousand Pesos Only ( Php 4,800,000.00 ) Under The Contract For The Supply And Delivery Of Various Equipment For Calibration Services - Rebid. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening And Items Below Are Subject For A Competitive Bidding, To Wit: Line Item Code Description Qty Unit Of Measure Unit Cost Total Cost 1 Defibrilator Measurement Analyzer 1 Unit 1,600,000.00 1,600,000.00 2 Electrosurgical Devices Analyzer 1 Unit 1,700,000.00 1,700,000.00 3 6 In 1 Patient Vital Signs Simulation/nibp, Spo2, Ecg, Temp, Ibp & Respiration Functionality Test 1 Unit 1,000,000.00 1,000,000.00 4 Gas Flow Equipment Analyzer 1 Unit 500,000.00 500,000.00 Grand Total ₱ 4,800,000.00 1. Defibrilator Measurement Analyzer Description Patient Category Defibrillators Analyzer Automates The Inspection And Preventive Maintenance Testing Of Defibrillators. They Need To Be Able To Test At Least Four Basic Defibrillator Performance Characteristics: Discharge Energy, Synchronized-mode Operation, Automated External Defibrillation, And Ecg Monitoring. Purpose Of Use Clinical Or Other Purpose Calibration Of Your Measuring Instruments Has Two Objectives. It Checks The Accuracy Of The Instrument And It Determines The Traceability Of The Measurement. In Practice, Calibration Also Includes Repair Of The Device If It Is Out Of Calibration. Clinical Department /ward Biomedical Department Technical Specifications Defib Measurement; Load Resistance; 45 -50ω +/- 1% No-inductive Range: 0-200 Joules Accuracy: ±1% Of Reading ±1 Joule Range (high): 200-600 Joules Accuracy: ±1% Of Reading ± 1 Joule Resolution: 0 - 0.1 Joule Voltage: 0 – 1000 To 5000 Volts Current: 0 – 50 To 100 Amps Sampling Rate: 200-250 Khz Sampling Frequency Maximum Pulse Width (capture Time): 5us – 100 To 120 Ms Clock Accuracy; 0.10s To 100+/_ 0.05s Aed Pulse Mode Waveforms; Normal Sinus Rhythm (nsr): 20 -300 Bpm, Amplitude 1.00mv (± 2%) Asystole (asys) Ventricular Fibrillation - Coarse (vfbc) 230-240 Bpm Amplitude) 1.00mv (± 2%) Ventricular Fibrillation – Fine (vfbf) 230-240 Bpm Amplitude) 1.00mv (± 2%) Monomorphic Ventricular Tachycardia(mvt0: 210 Bpm, 1.00mv (±2%) 200-210 Bpm, 1.00mv (±2% Atrial Fibrillation (afb): 20-300 Bpm, Amplitude 1.00mv (± 2%) Ecg Simulator: Ecg Simulation With High Level Output. Ecg Waveforms – Sinus: Normal Sinus Rhythm (nsr): 20 – 300 Bpm, Amplitude 0.50 – 5.00mv (± 2%) St Elevation (ste): 20 -300 Bpm, Amplitude 0.50 – 5.00mv (± 2%) St Depression (std): 20 -300 Bpm, Amplitude 0.50 – 5.00 Mv (±2%) Myocardial Infarction (mi): 20 – 300 Bpm, Amplitude 0.50 – 5.00mv (±2%) Tall T (tt): 20 300 Bpm, Amplitude 0.50 -5.00mv (±2%) Ecg Waveforms – Ventricular Arrhythmias: Premature Ventricular Contraction: 75-80 Bpm Intermittent (pvci): Amplitude 0.50 -5.00 – 5.00 Mv (±2%) Bigeminy (big): 75-80 Bpm, Amplitude 0.50 – 5.00mv (± 2%) Trigeminy (trig): 75-80 Bpm, Amplitude 0.50 – 5.00mv (± 2%) Ventricular Flutter (vflt): 230-240 Bpm, Amplitude 0.50 -5.00mv (± 2%)) Ventricular Fibrillation – Coarse (vfbc); 23-=240 Bpm, Amplitude 0.50 -5.00mv) Ventricular Fibrillation – Fine (vfbf): 230-240 Bpm, Amplitude 0.50 – 5.00mv (± 2%)) Monomorphic Ventricular Tachycardia (mvt): 200-210 Amplitude 0.50 – 5.00mv (±2% Right-focal Premature Ventricular Contraction (rfpvc) : 70-80 Bpm, Amplitude 0.50 -5.00mv (±2%)) Ecg Waveforms – Atrial Conduction Arrhymias: First Degree Av Block (favb): 70-80 Bpm, Amplitude 0.50 – 5.00mv (± 2%) Second Degree Av Block : 70-80 Bpm - Mobitz I (sav_ Mi): Amplitude 0.50 -5.00 Mv (± 2%) Second Degree Av Block: 70-80 Bpm) - Mobitz Ii (savb_mii): Amplitude 0.50 -5.00mv (±2%) Third Degree Av Block (tavb): 45-50 Bpm, Amplitude 0.50 -5.00mv (±2%)) Ecg Waveforms – Atrial Arrhythmias: Sinus Arrhythmias (sar): 20 -300 Bpm, Amplitude 0.50 -5.00 Mv (±2%) Missing Beat (mb): 20 - 300 Bpm, Amplitude 0.50 -5.00mv (±2%) Atrial Flutter (aflt): 250-300 Bpm, Amplitude 0.50 -5.00 Mv (±2%) Atrial Fibrillation (afb); 20 - 300 Bpm, Amplitude 0.50 -5.00 Mv (±2%) Paroxysmal Atrial Tachycardia (pat): 170-180 Bpm, Amplitude 0.50 -5.00mv (±2%) Premature Junctional Contraction (pjc): 20 - 300 Bpm, Amplitude 0.50 -5.00mv (±2%) Ecg Pacer Waveforms: Synchronous Atrial (aai): 20 - 300 Bpm, Pulse Amplitude 0.50 5.00mv Pulse Width 0.1 – 2.0ms Asynchronous Astrial (aoo): 20 - 300bpm Pulse Amplitude 0.50 – 5.00mv Pulse Width 0.1 - 2.0ms Pacer (pcr); 20 – 300 Bpm Pulse Amplitude 0.50 – 5.00mv. Pulse Width 0.1 – 2.0ms Ventricular Pacer (vvi); 20 300 Bpm Pulse Amplitude 0.50 – 5.00mv Pulse Width 0.1 – 2.0ms Atrial & Ventricular Pacer (ddd): 20 - 300 Bpm Pulse Amplitude 0.50 – 5.00mv Pulse Width 0.1 – 2.0ms R-wave Detection (rwd): 20 -300 Bpm Pulse Amplitude 0.50 -5.00mv Ecg Performance Wave Forms: Sine (sine): 0.1 – 300hz 1.00 – 10.00 Mv Square (sq): 0.1 – 300hz 1.00 – 10.00 Mv Triangle (tri): 0.1 – 300hz 1.00 – 10.00 Mv Sawtooth (saw): 0.1 – 300hz 1.00 – 10.00 Mv Inverse Sawtooth (invsaw): 0.1 – 300hz 1.00 – 10.00 Mv Pulse (pulse): 0.1 – 300hz 0.50 – 5.00 Mv Ecg Noise Selection: Amplitude 0 – 10.00mv Frequency 50 - 60 Hz Ecg Accuracy: Rate: ± 1% Bpm Amplitude: ± 2% (la-ll). ± 10% (paddles) Lead Ii: 1 – 10 Mv (in Steps Of 0.5 Mv). Other Leads Are Proportional To Lead Ii By The Following Percentages; Lead I: 60% Lead Ii 100% Lead Iii: 40% Pacer Input: Fix Load: 40-50ω Accuracy: 1 % , Non-inductive Over Voltage Protection: 5000 Va (4500-5000) Variable Load: 50 -1600ω In 50ω Steps Accuracy: 1 % Non Inductive Pulse Rate: 5.0 – 800ppm Accuracy: +/- (0.5% Rdg + 0.1ppm) Heart Rate Selection: 20 - 300 Bpm Under And Overdrive: 85% (20 Bpm Min) And 115% (300bpm Max) Wave Form Selection: Nsr, Vfibc, Vfibf, Mvt, Afib, Missing Beat, R-wave Detection Pulse Current Amplitude: 5.00 – 200ma Accuracy: +/- (1% Rdg + 0.02ma) Current Measurement: Average (rms) Leading Edge, Trailing Edge, Peak ( The Highest During The Pulse ) Pulse Width: 1.00 – 100ms Accuracy: +/- (0.5% Rdg + 0.01ms) Pulse Energy: 1µj – 2.00j Accuracy: +/- 4% + 10µj Pacer Manufacturer Algorithms: Cu Medical, Ge, Hp,laerdal, Mindray, Philips, Physiocontrol, Schiller, Welchallyn, Zoll Pacer Refractory Periods: Refractory Period Test: 15 – 500ms (paced And Sensed) Accuracy; +/- 1ms Pacer Sensitivity Test: Wave Form, R Wave: Polarity Normal And Reversed Selectable Dynamic Sensitivity: 0.05mv -5.00mv In 50µv Steps Pacer Interference Test (immunity): Heart Rate: 20 -300 Bpm Frequency: 50 Or 60 Hz Noise Level In Mv: 0-15.0mv Operation: 9.2-9.6v/2300-2400mah Nickel Metal Hydride Battery Pack Battery Charge Time: 2-2.5 Hours Battery Capacity (fully Charged): 10-12 Hours Mains Supply: 110/230v Ac.: 50 To 60hz 35va Power Supply Storage Environment: - 15°c To 60°c Operating Condition: 0°c To 40°c Environment Protection: Ip 40 Communication: Usb Display: Lcd Colour Graphic Display ¼ Vga Memory: 80-100 Test Results Including Graphs) Impact Rating: 5j Technical Services As Follows: • System Warranty Must Be Five (5) Years • Calibration Of The Unit Must Be Performed After Installation With Certificate • Service Call Within 24 Hours Maximum And Must Have Repair Facility In Mindanao Area. • Preventive Maintenance For Every Quarter Until Warranty Expires. • Service Kits And Consumables To Be Included For One Year Use. • Supplier Must Deliver And Install The Unit Without Cost To The Owner Accessories, Consumables, Spare Parts, Other Components Accessories: • Aed Lead • Ecg Snap Adapter 10 Pack • Usb Cable • Test N Tag 2 Bluetooth Printer • Thermal Labels Rolls 5 Pack • Paddle Adaptor Box • Paddle Adaptor Box Lead (red) • Paddle Adaptor Box Lead (black) • Applied Part Adaptor 10 Pack • Carrying Bag • Manual Guide Training, Installation And Utilisation Pre-installation Requirements Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirements For Commissioning 1.local Clinical Staff To Affirm Completion Of Installation, 2. Calibration Certificate And Warranty Certificate 3. The Supplier Must Have A Track Record/history/experience For Having A Calibration Center Within The Philippines For Assurance Of Being A Biomedical Company. 4. The Supplier Must Have A Certificate Of Being An Authorized Service Partner. 5. The Supplier Must Have A Branch Office In The Mindanao For Technical Support Purposes. 6. The Supplier Must Have A Local Business Permit For Services In The Mindanao Area. Training Of User/s 5 Days Training And Of User Biomed Engineer & Staff In Operation, Basic Maintenance And Documentation , Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Warranty And Maintenance Warranty • 5 Years For Parts And Labor • Cleaning And Maintenance Of Machine • Shall Have Spare Parts Availability Once The End User Needs It. Environmental Factors • Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg C And Relative Humidity Of 15 To 90%. • Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg C And Relative Humidity Of 15 To 90% Documentation Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Safety And Standards International Standards Risk Classification - Class B (ghtf Rule 11);class Ii (usa); Class Ii (eu, Japan, Canada And Australia) International Standards - Iso 13485, Fda, Ce. Delivery Period 90 Calendar Days From Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Service Center Must Have Service Center Within Caraga Regional, Cebu City, Cdo Or Davao City Post Qualification The Bidder Is Required To Send A Demo Unit To Caraga Regional Hospital. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed) 2. Electrosurgical Devices Analyzer Description Patient Category Electrosurgical Unit (esu) Analyzers Automate The Testing And Inspection Of The Output Circuits And Safety Feature Of Esus. They Perform Testing That Would Otherwise Require Several Other Pieces Of Equipment, As Well As Considerably More Time And Greater Technician Expertise. Purpose Of Use Clinical Or Other Purpose Calibration Of Your Measuring Instruments Has Two Objectives. It Checks The Accuracy Of The Instrument And It Determines The Traceability Of The Measurement. In Practice, Calibration Also Includes Repair Of The Device If It Is Out Of Calibration. Clinical Department /ward Biomedical Department Technical Specifications Power Measurement: True Rms Value Of Applied Waveform Power Rating: 0 – 800w (rms) Accuracy: ± ( 1w + 5% Of Reading) Duty Cycle: 80 – 100% Up To 60 Seconds Load Bank: 0 - 5115ω Resolution: 5 -7ω Voltage (peak): 5– 10kv (peak) - Closed Load Only Accuracy: ± (10% Of Reading + 15v) Voltage: 5 – 700v Rms Accuracy: ± (10% Of Reading + 5v) Current (rms): 0 – 6000 Ma With Load Banks 0 -8000ma External Load Test Accuracy: ± (2% Of Reading + 10ma) Crest Factor: 1.4 – 20 (vpeak / V Rms) Rms Bandwidth; Instrumentation Only: 30 Hz To 10mhz (-3 Db) With Loads: 30 Hz To 2.5 Mhz (-3 Db) Variable Loads: 5 - 5115ω Steps @ 5ω (1023 Steps) Accuracy: ± (1% + 0.5, 0.0ω Of Set Of Load) Load Array: Ceramic Resistors (non-inductive) Measurement Delay: Foot Switch Delay Selectable Between 300-5000ms (8-10m Seconds Resolution) Rf Leakage (high Frequency Leakage): Active: From Active Part To Earth Passive: From Plate – Receptacle – Earth Load: Variable See Power Measurement Fixed 2 X 200ω Accuracy: ± 1%, + 0.5, - 0.0 Ω Contact Quality Monitoring (cqm): Range: 0 -475ω Steps @ 1 Ω Steps Motor Driven Potentiometer Accuracy: ± 5-7% ± 1-2ω Alarm Register: High And Low Manual Confirmation Ranging: Manual Or Automatic Output Connectors: Remote Foot Switch Control (cut): Yellow, Single Relay Contact Remote Foot Switch Control (coag): Blue, Single Relay Contact High Frequency Leakage: Through 4mm Sockets And Power Measurements Usb: Pc Download Oscilloscope Output: 0.5v/a, 100ma, Rf Current Minimum Input, Un-calibrated, Indication Only Isolation: 10kv Isolation Between Measurement Device And Enclosure Low Frequency Filter: 100hz Filter To Avoid Low-frequency Disturbance Or Interference General: Memory: 4000- 5000 Records (4mb) Output: Csv And Sss Format Dimensions: Not More Than 373mm X310mm X210mm Weight: 10-12kg / 22 Lbs Operating Temperature: 10°c - 40°c / 50°c / 32°f -122°f Main’s Power: 115/230v Ac + 10%; 48 To 66 Hz, 35 Va Fuses: 2x 1.6 A (t) Ceramic Standard Accessories: Mains Lead, Usb Lead, Calibration Certification Technical Services As Follows: • System Warranty Must Be Five (5) Years • Calibration Of The Unit Must Be Performed After Installation With Certificate • Service Call Within 24 Hours Maximum And Must Have Repair Facility In Mindanao Area. • Preventive Maintenance For Every Quarter Until Warranty Expires. • Service Kits And Consumables To Be Included For One Year Use. • Supplier Must Deliver And Install The Unit Without Cost To The Owner Accessories, Consumables, Spare Parts, Other Components Accessories: • Test Lead, Usb Lead • Cut/coag Control Interface Cables • Power Cord • Colored Sheathed Banana Set • Operator Cd • Manual • Carrying Bag Training, Installation And Utilisation Pre-installation Requirements • Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirements For Commissioning • Local Clinical Staff To Affirm Completion Of Installation, Calibration Certificate And Warranty Certificate • The Supplier Must Have A Track Record/history/experience For Having A Calibration Center Within The Philippines For Assurance Of Being A Biomedical Company. • The Supplier Must Have A Certificate Of Being An Authorized Service Partner. • The Supplier Must Have A Branch Office In The Mindanao For Technical Support Purposes. • The Supplier Must Have A Local Business Permit For Services In The Mindanao Area. Training Of User/s 5 Days Training Of User Biomed Engineer & Staff In Operation, Basic Maintenance And Documentation , Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Warranty And Maintenance Warranty • 5 Years For Parts And Labor • Cleaning And Maintenance Of Machine • Shall Have Spare Parts Availability Once The End User Needs It. Environmental Factors • Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg C And Relative Humidity Of 15 To 90%. • Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg C And Relative Humidity Of 15 To 90% Documentation Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Safety And Standards International Standards Risk Classification - Class B (ghtf Rule 11);class Ii (usa); Class Ii (eu, Japan, Canada And Australia) International Standards - Iso 13485, Fda, Ce. Delivery Period 90 Calendar Days From Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Service Center Must Have Service Center Within Caraga Regional, Cebu City, Cdo Or Davao City Post Qualification The Bidder Is Required To Send A Demo Unit To Caraga Regional Hospital. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed) 3. 6 In 1 Patient Vital Signs Simulation / Nibp, Spo2, Ecg, Temperature, Ibp, And Respiration Functionality Test. Description Patient Category A Medical Device Tester Is Responsible For Ensuring That Medical Devices Meet Quality And Safety Standards. They May Work With A Variety Of Devices, From Blood Pressure Monitors To Pacemakers Purpose Of Use Clinical Or Other Purpose Calibration Of Your Measuring Instruments Has Two Objectives. It Checks The Accuracy Of The Instrument And It Determines The Traceability Of The Measurement. In Practice, Calibration Also Includes Repair Of The Device If It Is Out Of Calibration. 6 In 1 Patient Vital Signs Simulation: • Nibp, Spo2, Ecg, Temperature, Ibp, And Respiration Functionality Test. Clinical Department /ward Biomedical Department Technical Specifications Detailed Requirements Displayed Parameters User Adjustable Settings Non-invasive Blood Pressure Simulation: Waveform: Oscillometric Pulse Volume: High, Medeum,low, Pediatric Heart Rate; 20-300bpm Integrated Pump; 0 To 350mmhg User Configuration Leak Test: User Configurable Between 0-350mmhg Chronometer; Configurable Up To 999 – 1100 Secs) Digital Manometer: 0-410mmhg Pressure Accuracy: +/- 0.5% Fs Pressure Unit: Mmhg, Inhg, Kg/cm2. Cmh20, Mbar, Psi, In H20 And Kpa Oxygen Saturation Simulation(puls-r): Range: 30 To 100% Repeatability; Positive/negative 5% Of Reading Between 30-59% Spo2 Positive/negative 3% Of Reading Between 60-89% Spo2 Positive/negative 1% Of Reading Between 90-100% Spo2 ( Accuracy Of Simulation When Used With The Corresponding R-curves Based In Using The Same Probe And Monitor Set Up . Note That Some Montor Type Might Not Be Able To Display Low Range Sats) Heart Rate: 30-300bpm Accuracy: Positive/negative 1bpm Compatibility: Beijing Choice, Criticare, Ge Tuffsat, Masimo, Mindray, Nellcor, Nellcor Oximas, Nihon Kohden, Nonin, Novametrix, Philips,/hp Ecg Arrhythmia Simulator: Simulation: 5 Lead Simulation Including High Level Output On Normal Sinus Rhythm (nsr), St Elevation, St Depression, Myocardial, Infarction, Tall T Heart Rate: 20-300bpm Accuracy: Positive/negative 1 Bpm Amplitudes; Lead Ii: 0.5 -5 Mv (in Steps Of 0.5 Mv). Other Leads Are Proportional To Lead Ii By The Following Percentage: Lead I : 60% Lead Ii : 100% Lead Iii : 40% Accuracy: Positive/negative 2% Connection High Level Ecg 3.5mm Jack Plug St Elevation /depression: Heart Rate: 20-300bpm Elevation %: 7%, 13%, 20% Elevation Slope: Positive, Negative, Flat Myocardial Infarction: Type: Ischemia, Injury, Infarction, Inferior Infarction Heart Rate: 20-300bpm Tall T: Heart Rate: 80 Bpm (ranges 75-80) T Wave Amplitude: 0-1.2mv (steps Of 0.1mv) Arrhythmia Waveforms (atrial); Simulation: 5 Lead Simulation Amplitudes: 0.5 / 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 Mv. Heart Rate ( When Applicable ) 20 – 300bpm Atrial: Sinus Arrhythmia (sa), Missing Beat, Atrial Flutter (aflt), Atrial Fibrillation (afb), Paroxysmal Atrial Tachycardia (pat), Junctional Premature Contraction. Atrial Conduction: First Degree Av Block, Second Degree Av Block – Mobitz I, Second Degree Av Block – Mobitz Ii, Third Degree Av Block, Right Bundle Branch Block (rbb), Left Bundle Branch Block (lbb), Left Anterior Hemiblock. Ventricular: Premature Ventricular Contraction – Intermittent Premature Ventricular Contraction – Continuous Bigeminy, Trigeminy, Ventricular Flutter (vflt), Ventricular Fibrillation Fine (vfbf), Ventricular Fibrillation Coarse ( Vfbc), Monomorphic Ventricular Tachycardia (mvt), Polymorphic Ventricular Tachycardia (pvt) Right Focal (pvc). Performance Waveforms: Shape: Sine, Square, Triangle Rate: 0.1 To 0.9hz (in Steps Of O.1hz) 1 To 100hz (in Steps Of 1hz) Amplitude: Lead Ii : 0.5-5 Mv (in Steps Of 0.5 Mv) Other Leads As Above Accuracy: 2% Shape: Pulse Rate: 20 Ms Pulse Duration, 4 Second Delay Amplitude: Lead Ii : 1 Mv. Other Leads As Above Accuracy: 2% Pacer Waveforms: Available: Synchronous Atrial, Asynchronous Atrial, Paver Only, Ventricular Pacer, Atrial & Ventricular Pacer. Qrs: 1mv Pacer Pulse Amplitude: 0.1-2mv Pacer Pulse Polarity: Positive/negative Pacer Pulse Width: 0.1-2ms R Wave Detection: Heart Rate: 70 Bpm R Wave Width; 10-120ms (steps Of 10ms) Temperature Simulation: Simulation; Ysi 400 / 700 Static Range; Preset At 25, 23, 37, And 41c Accuracy: ± 0.1c Default Setting: Ysi 400 37c Respiration Simulation: Rates; 5, 10, 15, 30, 60, 120, 180 Breaths Per Minute Base Resistance: 250, 500, 750, 1000 Ohms Accuracy: ± 10% Resistance Variation: 0.1, 0.5, 1.0, 1.5 Ohms Accuracy: ± 10% Default Setting: 15bpm / 250ω / 0.1ω Apnoea Simulation: 0-60 Seconds Duration 0-300seconds Interval Invasive Blood Pressure Simulation; Channels: 2 Channels Static: 0 To 300mmhg Dynamic: 0-300mmhg For Systolic 6 Diastolic Accuracy: ±1mmhg Excitation Voltage: 2 – 16v Impedance: 350ω Nominal Simulated Sensitivity: 5µv / V /mmhg Basic Specification: Operation; Battery Cell, In-site Charge Battery Charger: 100-240vac, 50/60hz Supply; 12 Vdc Centre Positive Battery Life: 8 Hours Standby Or A Maximum Of 200 Nibp Simulations Memory Capacity; Approx. 5, 000 Records Communication: Bluetooth Display: Monochrome, ¼ Vga Full Graphics Keypad: Alpha Numeric Weight: < 1.5 Kg, <3.5lbs Size (lxwxd): 250-270 X 100 To 110 Mm / 10.5 X 4 X3 Operating Environment: - 15° - + 60°c Environmental Protection: Ip 40 Puls-r: Compatibility Beijing Choice, Ge Tuffsat, Mindray, Nellcor Oximax, Nonin, Philips / Hp, Criticare, Masimo, Nellcor, Nihon Kohden, Novametrix Supported Default R-curves Heart Rating: 30 – 300bpm Accuracy Of Simulation When Used With The Corresponding R Curves: Resolution 1% Steps - Range 30-59% - Repeatability ± 5% 1% Steps -range 60 – 89% - Repeatability ±3 % 1% Steps -range 90 – 100% - Repeatability ±1% Technical Services As Follows: • System Warranty Must Be Five (5) Years • Calibration Of The Unit Must Be Performed After Installation With Certificate • Service Call Within 24 Hours Maximum And Must Have Repair Facility In Mindanao Area. • Preventive Maintenance For Every Quarter Until Warranty Expires. • Service Kits And Consumables To Be Included For One Year Use. • Supplier Must Deliver And Install The Unit Without Cost To The Owner Accessories, Consumables, Spare Parts, Other Components Accessories: • Ibp Connection Cable • Nibp Accessories • Temperature Connect Cables • Ecg Cables And Leads • Puls-r Universal Spo2 Simulation Finger Standard Accessories: • Carry Case • Nibp Tubing Kit • Ecg Adaptor Module And Snap-on Adaptors • Quick Start Guide • Power Supply Training, Installation And Utilisation Pre-installation Requirements Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirements For Commissioning 1. Local Clinical Staff To Affirm Completion Of Installation, 2. Calibration Certificate And Warranty Certificate 3. The Supplier Must Have A Track Record/history/experience For Having A Calibration Center Within The Philippines For Assurance Of Being A Biomedical Company. 4. The Supplier Must Have A Certificate Of Being An Authorized Service Partner. 5. The Supplier Must Have A Branch Office In The Mindanao For Technical Support Purposes. 6. The Supplier Must Have A Local Business Permit For Services In The Mindanao Area. Training Of User/s 5 Days Training Of User Biomed Engineer & Staff In Operation, Basic Maintenance And Documentation , Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Warranty And Maintenance Warranty • 5 Years For Parts And Labor • Cleaning And Maintenance Of Machine • Shall Have Spare Parts Availability Once The End User Needs It. Environmental Factors • Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg C And Relative Humidity Of 15 To 90%. • Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg C And Relative Humidity Of 15 To 90% Documentation Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Safety And Standards International Standards Risk Classification - Class B (ghtf Rule 11);class Ii (usa); Class Ii (eu, Japan, Canada And Australia) International Standards - Iso 13485, Fda, Ce. Delivery Period 90 Calendar Days From Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Service Center Must Have Service Center Within Caraga Regional, Cebu City, Cdo Or Davao City Post Qualification The Bidder Is Required To Send A Demo Unit To Caraga Regional Hospital. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed) 4. Gas Flow Equipment Analyzer Description Patient Category Test Gas Flow And Respiratory Medical Equipment Accurately, Including Ventilators, Flow Meters, Edoscopic Insufflators, Suction Devices, Pressure Gauge And Anaesthesia Machine, Especially When Accuracy Of Low Volume And Pressure Is Crucial. Purpose Of Use Clinical Or Other Purpose Calibration Of Your Measuring Instruments Has Two Objectives. It Checks The Accuracy Of The Instrument And It Determines The Traceability Of The Measurement. In Practice, Calibration Also Includes Repair Of The Device If It Is Out Of Calibration. 5 In 1 Gas Flow Equipment Analyzer • Ventilators, Flow Meters, Pressure Gauge, Suction Machine And Anesthesia Machine Clinical Department /ward Biomedical Department Technical Specifications Flow And Pressure Measurements: Flow: Range: Accuracy: Measuring Direction * Bidirectional Temperature Compensated * Automatic Or Manual Pressure Compensated *automatic Humidity Compensated *- Manually High Flow * ±300 L/min , * ±1.9% Or 0.1 L/min (for 10..40°c) Pressure: High Pressure (p High) * -1 – 9 Bar * ±0.5-1% °or ±6-7 Mbar Differential Pressure (p High): * ±180-200mbar * ±.05-0.75% Or ±0.5-0.1mbar Pressure In High Flow Channel: * - 55-150mbar * ±0.75% Or 0.1mbar Atmospheric Pressure: * 550-1150mbar * ±1% Or ± 5mbar Units: Flow: * L/min, L/s, Cfm, Ml/min, Ml/s Pressure: * Bar, Mbar, Cmh20, Inh20, Torr, Inhg, Hpa, Kpa, Mmhg, Psi Other Measurement: Oxygen; Concentration; * 0-50% * ±15 O2 Pressure Compensated; * ≤100-150mbar Temperature: In High Flow Channel: * 0-55°c * ±1.75% Or ±0.5% °c Co2: Concentration * 0-16 Vol% * ±(0.2vol% + 2% Of Reading) N2o: Concentration * 0-90 Vol% * ±(2% Vol% + 2% Of Reading) Hal, Iso,enf: Concentration * 0-8% Vol% * ±(0.15% + 5% Of Reading) Sev Concentration *1-10% Vol% * ±(0.15% Vol% +5% Of Reading) Des Concentration * 0-20 Vol% * ±(0.15 Vol% +55 Of Reading) Gas Type: * Air,o2, Air/o2, N2o, N2o/o2, He/o2, N2,c02, Gas Standards: * Atp, Atpd, Atps, Ap21, Stp, Stph, Btps, Btps-a, Btpd, Btpd-a, 0/1013, 20/981, 15/1013, 25/991, 20/1013, Ntpd, Ntps Ventilation Parameters: Breath Rate: Rate: * 1-980 Bpm * ±0.5 Bpm Or ±0.5-5% Or 2.0 Time Ti Te * 0.04 – 60 S * ±0.01-0.02 S Ratio I:e * 1:300-300:1 * ±2.5% * 0-90% * ±3-5% Breath Volumes V: * * ±2% Or 0.20ml (> 6 Sl/min) Vti,vte: * ±10l * ±2% Or ±2.20ml (>6 Sl/min) Minute Volume Vi, Ve: * 0-299sl/min * ±2.5% Pressure P Peak, P Mean, Peep, P Plateau, Ipap: * 2-150 Mbar * ±0.75% Or ±0.1mbar Peakflow Pf Insp1, Pf Xp : * ±300 Sl/min * ±1.9% Or ±0.1% Sl/min Compliance C Stat * 1-1000 Ml/mbar * ±3% Or ±1ml/mbar Trigger Adult, Pediatric, Hfo Ext. Trigger * Adult, Pediatric Hfo, Adjustable On Flow Or Pressure Curves With User Defined Limits General Information; Power: * 100-240vac, 50/60hz Battery * 3-5 Hours Power Consumption * 3-6 W Weight * 0.52-1kg Dimension ( W X D Xh) * 11.4x 7x 7.3cm Depends Of The Manufacturer) Data Storage * Internal And Micro Sd Display * Multi Touch (color) , Realtime Curves Interfaces * Rs-232, Usb , Ethernet, Can, Analog Out, Ttl, Wlan, Tsi4000 And Prima Protocool Calibration * Annually Condition Ambient Temperature * 20-40°c (*59-104°f) Condition Humidity * 20-90% R,h Technical Services As Follows: • System Warranty Must Be Five (5) Years • Calibration Of The Unit Must Be Performed After Installation With Certificate • Service Call Within 24 Hours Maximum And Must Have Repair Facility In Mindanao Area. • Preventive Maintenance For Every Quarter Until Warranty Expires. • Service Kits And Consumables To Be Included For One Year Use. • Supplier Must Deliver And Install The Unit Without Cost To The Owner Accessories, Consumables, Spare Parts, Other Components Accessories: • Stand • Smartlung Adult (1l) • Webserver Configurator And Monitoring • Flow Lab Software • Oxygen Sensor • Adapter Set • Laminar Flow Tube • Car Adapter • Micro Sd Memory Card • Protection Filter • Usb Cable • Ethernet Cable • Power Supply • Battery Pack • Usb Adapter • Manual • Protector • Carrying Bag Training, Installation And Utilisation Pre-installation Requirements Supplier To Perform Installation, Safety And Operation Checks Before Handover. Requirements For Commissioning 1. Local Clinical Staff To Affirm Completion Of Installation, Calibration Certificate And Warranty Certificate 2. The Supplier Must Have A Track Record/history/experienced For Having A Calibration Center Within The Philippines For Assurance Of Being A Biomedical Company. 3. The Supplier Must Have A Certificate Of Being An Authorized Service Partner. 4. The Supplier Must Have A Branch Office In The Mindanao For Technical Support Purposes. 5. The Supplier Must Have A Local Business Permit For Services In The Mindanao Area. Training Of User/s 5 Days Training Of User Biomed Engineer & Staff In Operation, Basic Maintenance And Documentation , Shall Be Provided User Care To Demonstrate The Proper Cleaning And Disinfection With Provision Of Printed Cards Or Tags Beside The Unit. Warranty And Maintenance Warranty • 5 Years For Parts And Labor • Cleaning And Maintenance Of Machine • Shall Have Spare Parts Availability Once The End User Needs It. Environmental Factors • Capable Of Being Stored Continuously In Ambient Temperature Of 0 To 50 Deg C And Relative Humidity Of 15 To 90%. • Capable Of Operating Continuously In Ambient Temperature Of 10 To 40 Deg C And Relative Humidity Of 15 To 90% Documentation Documentation Requirements User, Technical And Maintenance Manuals To Be Supplied In English Language. Service Manual In English. List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. Certificate Of Calibration, Warranty And Inspection To Be Provided. Safety And Standards International Standards Risk Classification - Class B (ghtf Rule 11);class Ii (usa); Class Ii (eu, Japan, Canada And Australia) International Standards - Iso 13485, Fda, Ce. Delivery Period 90 Calendar Days From Receipt Of The Notice To Proceed Terms Of Payment Upon Full Delivery, Installed, Tested And Commissioned Service Center Must Have Service Center Within Caraga Regional, Cebu City, Cdo Or Davao City Post Qualification The Bidder Is Required To Send A Demo Unit To Caraga Regional Hospital. Failure To Comply With The Preferred Schedule Of The Procuring Entity For The Post Qualification Can Be A Ground For Disqualification. (no Extensions Allowed) This Procurement Is A Partial Bid Or Line Item Bid. Validity Of The Contract Without Prejudice To The Provision Of Applicable Laws, Rules And Guidelines, The Contract Shall Be Automatically Terminated Under The Following Conditions: A. When The Total Quantity Specified In The Contract Has Been Exhausted; Or B. For Any Justifiable Reason Ground Where The Contract Will Not Redound To The Benefit Of The Government Or There Is Violation Of The Contract. General Conditions All Other Rules Governing Contract Implementation And Termination Under Ra 9184 And Its Irr, And Relevant Procurement Policies Shall Be Applicable. Technical Specifications And Terms Of Reference Is Hereby Posted In Philgeps And Form An Integral Part Of This Invitation To Bid. 2. The Crh Now Invites Bids For The Procurement Of The Above-captioned Project. Delivery Of The Goods Is Required Within The Period Specified Under Section Vi (schedule Of Requirements). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. Section 23.4.1.3. (ra 9184) The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. Slcc Must Be Within 2 Years From The Submission Of Bids. (based On The Completion Date). Slcc Shall Be The Same Or Similar In Nature, Which Shall Be Determined By The Bids And Awards Committee. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: A. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And B. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee (bac) Secretariat, At Procurement Section, Caraga Regional Hospital, Surigao City And Inspect The Bidding Documents At The Address Given Above During 8:00 Am – 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 10, 2024 – January 21, 2025 On Or Before 10:00 A.m. From The Address Above And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Specified Below: Bidding Schedule Pre-bidding Conference December 18, 2024 At 9:00 O’clock In The Morning Via Zoom Platform Link: Join Zoom Meeting Https://us06web.zoom.us/j/83066464127?pwd=umvcd4lcmrkaz6ldz2qhqbhw76cdzk.1 Meeting Id: 830 6646 4127 Passcode: 528376 Deadline Of Submission Of Bids January 21, 2025 At 10:00 A.m... Via Online And Submit Your Bidding Documents To This Email Address: Crhbac2020@gmail.com . Please Be Advised That Failure To Submit Bidding Documents To The Designated Official Email Address Will Result In Automatic Rejection And Disqualification. Opening Of Bids January 21, 2025 At 2:00 P.m. Via Zoom Platform. Join Zoom Meeting Https://us06web.zoom.us/j/85126317644?pwd=pqhrftd91zoxlr4ufcctyy7gtdz5qj.1 Meeting Id: 851 2631 7644 Passcode: 872092 Complete Philippine Bidding Documents Please Click The Link Below For The Complete Pbd: Https://drive.google.com/drive/folders/1enb1ofcvp2zs4qembcxjjpeilwkths5c?usp=sharing Payment Of Bidding Documents Php 5,000.00 It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. The Following Phlippine Bidding Documents Can Be Accessed In The Philgeps, To Wit: A. Technical Specification / Terms Of Reference/ List Of Items B. Instruction To Bidders: B.1. Documents To Be Submitted (checklist- This Will Be Discussed During The Pre-bid Conference) B.2. Memorandum Of Undertaking – Provision Thereof Is Strictly Implemented C. Guidelines On The Conduct Of The Electronic Submission And Receipt Of Bids By The Procuring Entity – Caraga Regional Hospital (crh) D. Philippine Bidding Documents 6. The Crh Will Hold A Pre-bid Conference On The Above-mentioned Date, Time And Venue, Which Shall Be Opened To Prospective Bidders. The Pre-bidding Conference And Opening Of Bids Shall Be Conducted Through Videoconferencing, Webinar Or Virtual. Please Send Your Intent To Participate To Our Email Address As Provided Below. 7. Bids Must Be Duly Received By The Bac Secretariat At Via Designated Email On Or Before January 21, 2025 At 10:00 O’clock In The Morning. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On January 21, 2025 At 2:00 O’clock In The Afternoon At The Bac Conference Room, Beside Procurement Office, Caraga Regional Hospital, Rizal Street, Surigao City As Virtual / Electronic Bidding Via Zoom Platform. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Above. Late Bids Shall Not Be Accepted Under Any Circumstances May It Cause. 8. Furthermore, The Standard Philippine Bidding Document (pbd) Is Form And Part Of This Invitation In Accordance To Ra 9184 And Other Applicable Laws, Rules And Policy. 9. The Crh Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. The Opening And Receipt Of Bids Is Strictly Implemented Through Electronic Submission. Given The Covid-19 Pandemic, Procurement Activity Has Been Expedient And One Of This Is The Conduct Of Electronic Submission Of Bids. The Crh Thru The Bids And Awards Committee (bac) Has Submitted Certification, Certified By The Highest Official Managing The Information Technology, Describing The Electronic System Or Procedure To Be Used By The Crh For The Electronic Submission And Receipts Of Bids And A Statement That The Same Is Compliant With The Gppb Resolution No. 12-2020 Requirements. 11. Bidding Documents Shall Be Emailed To This Email Address, With Activated Password To: Crhbac2020@gmail.com. You May Deposit On Line For The Payment Of The Bidding Documents To This Account Below: Bank Name: Land Bank Of The Philippines Account Name: Caraga Regional Hospital-trust Fund Account Number: 0982 -1288 – 70 12. Furthermore Deposit Slip Shall Be Submitted Via Email To: Crhprocurement.bac@gmail.com 13. The Procuring Entity Will No Longer Accept Nor Entertain Any Form Of Bids Submission Except Electronic. Failure To Comply Electronic Submission Will Be Immediately Disqualified. Guideline On The Electronic Submission Is Hereby Attached. 14. Join The Caraga Regional Hospital Supplier Network By Filling Out The Registry Form From This Link : Https://bit.ly/crh_suppliersregistry 15. For Further Information, Please Inquire To: Bac Secretariat Caraga Regional Hospital. Rizal Street, Surigao City Tel. Nos. (086) 826-1575 Local 194 Direct Line: (086) 826-9058 Mobile Nos. 09850508783 (smart/tnt) 09539212832 (globe/tm) E-mail Address: Crhprocurement.bac@gmail.com Approved By: (sgd) Fermarie C. Dulpina, Rmt, Mpa, Jd Chief Health Program Officer Chairman, Bids And Awards Committee

Tender Id: 33255036-SD-EMU CARSHED-NKG-STORES/EASTERN RLY | Safety Planner 2025

Tender Id: 33255034-SD-EMU CARSHED-NKG-STORES/EASTERN RLY | Safety And Technical Analysis Tool, As Per Sample.

Tender Id: 33255026-SD-EMU CARSHED-NKG-STORES/EASTERN RLY | Wooden Structures.