Cars Tenders

Details: Description Invitation To Bid The Nueva Ecija University Of Science And Technology (neust) Through The Bids And Awards Committee (bac) Will Conduct Early Procurement Activities (epa) For The Following Project Funded By Nep/gaa 2025 In Accordance With The Guidelines On The Implementation Of Epa. Interested Entities Are Hereby Invited To Bid For The Following: Name Of Project: Hospitality And Tourism Management Virtual-reality Laboratory Set/package Location: Neust Cabanatuan City Approved Budget For The Contract: Php5,500,000.00 Contract Duration: 90 Calendar Days Source Of Fund: Nep/gaa 2025 Cost Of Bidding Documents: Php10,000.00 Project Description: 1lot/package Item No. Item & Description Quantity Unit 1 Hospitality And Tourism Management Virtual-reality Laboratory Set/package A. 90 Pcs. Virtual Reality Device (head Goggles And Hand So) B. 3 Units 50 Inches 4k Led Smart - 4k Uhd - Smart Tv - Bluetooth Connectivity, Hdr, Wireless Connectivity C. 3 Units All-in-one Computer - Apple M4 Chip With 10-core Cpu, 10-core Gpu, 16-core Neural Engine - 24" 4.5k Retina Display² - Standard Glass - 16gb Unified Mem9ory 512gb Ssd Storage - Four Thunderbolt 4 Ports Gigabit Ethernet - Magic Mouse - Magic Keyboard With Touch Id - Us English D. Simulation Program Software • Hotel Operations And Services - Hotel Section / Department Familiarization - Hotel Room Housekeeping Procedure (cleaning And Bed Preparation) - Housekeeping Tools And Equipment Familiarization • Food And Beverage Operations And Services - Restaurant Section/department Familiarization - Bar Tools And Equipment Familiarization - Kitchen Tools And Equipment Familiarization - Bartending And Cocktail Mixing - Food Service Procedures • Tourism And Travel Management - Phase 1 O Philippine Virtual Tour & Tourism Destination (360 Vr Tour) O Wonders Of The World (famous International Tourism Destination) (360 Vr Tour) O Country Familiarization (map And Flag Of The World) O Philippine And Tourism Geography (map, Province, Capital, Municipality, Culture) - Phase 2 O Travel Booking Simulation (using Global Distribution System) O Travel Agency Facility Familiarization O In-flight Safety Demonstration And Familiarization (aircraft) O Cruise Ship Vessel Familiarization 1 Set 2 Global Distribution System (gds) With Hotel Property Management System (pms) – Package/set A. 3 Units – Server Computer - Processor: 1 X Intelâ® Xeonâ® E3-1220v3 Quad Core Processor (3.10ghz/80w) - Cache: 8mb L3 Cache - Memory: 4gbâ 1 X 4gb Ddr3-1333 Unbuffered Ecc Memory - Expansion Slots • 1 X Pcieâ® 3.0 X16 • 1 X Pcieâ® 2.0 X4 (x8 Connector) • 1 X Pcieâ® 2.0 X1 (x4 Connector) • 1 X Pci - Graphics: Intel Hd P4600 Graphics - Ethernet: Onboard Gigabit Lan (intel� 82576eb) - Power Supply: 500w 80 Plus Bronze Certified Efficient Fixed Power Supply - Storage: 1 X 500gb 3.5” Sata 7200rpm (up To 4 X 3.5” Sata Hdd) - Chassis Form Factor: Tower Chassis - Optical Drive: Dvd-rw - Dimensions: 180 (w) X 450 (d) X 358 (h) Mm (7.1 X 17.7 X 14.1 Inches) - Weight: 7.9- 12.4 Kg (17.4-27.3 Lbs.) - Os Support: Windows 11 Os 64 Bit - Security And Service Features • Chassis Intrusion Alert, • Admin/user Password, • Device Boot Control, • Power On Password, • Setup Password - Emissions Classification (emc) • Fcc (class B) Bsmi (class A) - Accessories: Keyboard And Mouse - Warranty: 3 Years Warranty On Parts, 1 Year On Labor, 1 Year On-site - Monitor: 20 Inches Led Monitor With Hdmi/ Vga Inputs A. Comprehensive Travel Distribution And Hotel Management Solution Software - Gds Core Features - Airline Reservations, Hotel Booking, Car Rentals, Ancillary Services, Payment Integration, And Customer Experience Enhancements. - Hotel Property Management System (pms) Features • Reservation And Front Desk Management O Dashboard For Reservations. O Room Availability And Rate Management. O Check-in/check-out Processing. Housekeeping Module O Task Updates For Housekeeping Staff. O Room Status Management (clean, Occupied, Out Of Service). Inventory And Revenue Management Dynamic Pricing Based On Demand And Seasonality. Room Inventory Distribution To Online Travel Agents (otas) And Gds Channels. • Customer Relationship Management (crm) Guest Profiles With History And Preferences. Automated Communication (confirmation Emails, Pre-arrival Messages). • Billing And Payments (mockup Payments Only) Integrated Billing For Services (room Stays, Minibar, Spa, Etc.). Secure Online And Offline Payment Options. Reporting And Analytics Customizable Reports (occupancy, Revenue, Guest Demographics). Business Insights For Demand Forecasting And Trend Analysis. Advanced Features For Gds + Pms Integration Unified Booking Engine: A Single Platform For Travel Agents To Book Hotels Channel Management: Automatic Synchronization Of Room Availability And Pricing Across Otas, Gds, And Direct Booking Channels. Software Specification Windows Executable Supports Windows 10 & 11 Unlimited Installations To Any Computer Software License Custom Developed For Neust Hrm, This Means That The Full Ownership Of This Application Or Software Will Be Neust Htm Updates Are Free For Up To 3 Years 1 Set 3 Point Of Sales Simulation For Retail And Restaurant Operations – Package/set A. 6 Units - Android Tablet Connectivity: Sim: Nano-sim, Esim - Cellular Model; Wifi Display: 8.7 Inches, 214.9 Cm2 (~81.7% Screen-to-body Ratio) Resolution: 800 X 1340 Pixels, 5:3 Ratio (~179 Ppi Density) Platform/ Os: Android 13, Upgradable To Android 14, One Ui 6.1 Chipset: Mediatek Helio G99 (6 Nm) Cpu: Octa-core (2x2.2 Ghz Cortex-a76 & 6x2.0 Ghz Cortex-a55) Gpu: Mali-g57 Mc2 Memory: Card Slot, Microsdxc (dedicated Slot) Internal: 128gb 8gb Ram A. 6 Units - Portable Bluetooth Receipt Printer Support Cash Drawer Drive Parallel, Serial, Usb, Lan Interface Optional Built-in Data Buffer(able To Receive New Data While Printing) Character Can Be Enlarged, Adjusted Line Spacing Left And Right Spacing, As Well As Bold And Underline Support Different Density Nv Bitmap Download And Printing Esc/pos Compatible, Setting Dip Switch To Choose Characters And Fonts Support Configuration Through Web Multiple Connect Printing Through Software Binding To Set Printer Identification Support International Language A. Pos Simulation And Training Software For Retail And Restaurant Operations Simulation Modules: -retail Operations: Barcode Scanning, Payment Processing (mock-up Cash, Card, Digital Wallets), Refunds, And Discounts. - Restaurant Operations: Table Ordering, Kitchen Communication, Split Bills, And Menu Updates. Interactive Dashboard: Real-time Analytics For Tracking Sales, Errors, And Performance Metrics During Training. Admin And Trainer Tools: Ability To Create Custom Scenarios, Define Learning Objectives, And Review Performance. Lifetime Ownership: No Recurring License Fees; Updates For Educational Purposes Included. Software Specification Android Application;supports Android 13 - 16 Operating Systems; Unlimited Installations To Any Android Tablet Device Software License Custom Developed For Neust Htm, This Means That The Full Ownership Of This Application Or Software Will Be Neust Htm Updates Are Free For Up To 3 Years 1 Set The Summary Of The Bidding Activities Is As Follows: Activities Schedule 1. Advertisement December 11-18, 2024 2. Issuance Of Bid Documents December 19, 2024 To January 3, 2025 3. Pre-bid Conference December 19, 2024, 2:30pm (via Zoom) 4. Deadline For Submission Of Bids (manual Submission) January 3, 2025, Until 5:00pm Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City 5. Opening Of Bids (face To Face) January 6, 2025, 9:00am Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City General Conditions: All Particulars To The Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulations. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Business Organizations With At Least Sixty Percent (60%) Interest Or Ownership Of At Least 60% Of The Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Business Organizations Of A Country Where The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From December 19, 2024 To January 3, 2025 Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Pay The Applicable Fee For The Bidding Documents Not Later Than The Deadline For Submission Of Bids. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 3, 2025, Until 5:00pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Pbd. Late Bids Shall Not Be Accepted. On The Last Day For The Submission Of Bids And No Prospective Bidder/s Submitted Its Bid Documents Or Only One (1) Bid Was Submitted For The Above-mentioned Project, The Same Is Deemed Extended Until January 10, 2025, 5:00 Pm. This Is To Protect The Interest Of The University And Full Opportunity For A Competitive Bidding May Be Achieved. The University Likewise Reserves The Right To Cause Extension Or Postponement Of The Filing Of Bids Should Similar Situation Arises. Bid Opening Shall Be On January 6, 2025, 9:00 Am At The Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City Unless Extended. Bids Will Be Opened In The Presence Of The Bidder Or His/her/its Duly Authorized Representative/s. Failure To Attend During The Opening Of Bids Shall Be Considered A Waiver On The Part Of The Bidder Who Likewise Waives His/her/its Right To Raise Questions During The Bidding Procedures. The Nueva Ecija University Of Science And Technology Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For More Information Concerning This Bidding, Please Contact The Following: Engr. Joel G. De Mesa Head, Bac Secretariat For Goods And Services Neust Gen. Tinio St., Cabanatuan City Email Address: Neust.bacsec@gmail.com Approved By: Dr. Honorato P. Panahon (sgd.) Bac Chairperson

Details: Description Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 2- Support Service Area: Speech Therapy And Language Area) 1. The Deped Schools Division Of Eastern Samar, Through The General Appropriation Act Of 2024 Intends To Apply The Sum Of ₱ 310,183.00 Being The Abc To Payments Under The Contract For Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 2- Support Service Area: Speech Therapy And Language Area) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Deped Schools Division Of Eastern Samar Now Invites Bids For The Above Procurement Project. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Prospective Bidders May Obtain Further Information From Deped Schools Division Office Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 500.00. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped Schools Division Of Eastern Samar Will Hold A Pre-bid Conference On January 13, 2025, 10:00am At The Bac Office, Deped Schools Division Of Eastern Samar Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before January 27, 2025, 9:00am Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 27, 2025, 10:00am At The Given Address Below Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Only The Proprietor Or Authorized Representative May Be Allowed To Purchase Bidding Documents. Letter Of Intent (loi), Special Power Of Attorney (spa) (for Authorized Representative), And Drl (document Request List From Philgeps) Are Required Upon Purchase. 11. The Deped Schools Division Of Eastern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Items, Specifications, Quantity Of Delivery, And Abc: Cabinet, Open Shelves 4x6 Ft 2 Set Sofa, Seating Capacity 2 Velvet: 100 % Polyester Frame Material Manufactured Wood Leg Material Manufactured Wood Seat Fill Material Foam Seat Construction Mdf Back Fill Material Foam Tufted Cushions Square Arm 1 Set Wooden Cubicle Partition, 4 Panel Divider (l 70.25 Inches X H70.25 Inches X T0.75 Inches) 4 Set Mirror, Aluminum Frame (thickness 1/4 Inch X 4 X 8 Ft) 1 Set Filing Cabinet, Vertical Filing Cabinet In 2, 3 And 4 Drawers With Plastic Divider And Central Lock Heavy Duty Construction Assembles In Minutes Power Coated Finish Anti-tilt Mechanism Quiet Closing 3 Sectional Railings For Smooth Actions Central Locking System 1 Unit Book Shelves, Plywood Construction Cladded W/ High Pressured Laminate W/ Box 3880mm L X 400mm W X 1800mm H 2 Piece Small Table With Chairs, Kindergarden Table Heavy Duty Metal Legs 60cm X 120 Cm X 55 Cm Ht Php 2,500.00 Blue Color Rectangular Table 24x48 Php 2000 Chairs 34cm D X 35 Cm L X 28 Cm Ht X 52 Cm Total Ht. Php 400 .00 (4 Chairs) 1 Set White Board, Aluminum Frame, 4 X 8 Ft. Wall Mounted 1 Piece Table, Lockable Pu Casters Dia 65mm -18mm Thickness E1grade Mdf With Marble Color Pvc Veneer -powder Coated Aluminum Frame -class 3 Gas Lift Height Adjustable Range: 77-106cm -max Loading Capacity: 60kg -tabletop With I Pad Holders 2 Unit Floor Mats, Dimension: 1mx1mx24mm Material: Rubber Colors: Blue, Red, Orange, Yellow, Green, Brown, Grey, Black, Maroon 20 Piece Phonics Phones, Pack Of 16: Perfect For Classrooms. You Get 16 Whisper Phones For Classroom Reading. 4 From Each Color. Comes In Red, Purple, Green, & Pink. Our Phonic Phone Is A Great Addition To Your Phonic Manipulative Materials, Speech Therapy Toys For Kids Package Dimensions: 8.9 X 8.9 X 4.1 Inches Item Weight: 8.8 Ounces 1 Set Communication Boards, Book And Cards Specification: Binder Features Two Interior Storage Pockets For Loose Materials, Color Black, And It Measures 9x7.5 Convenient To Travel And Put In Your Child's Backpack Or Carry In Hand. Binder Comes With 5 Different Colorful 10 Mil Poly Dividers, 3 Hard Strips (hook) Attached On Each Side To Hold 30 Cards. Each Card Measures 1.5 X 1.5. Inch Mounted With 1/2-inch Soft Dot (loop), And Round Corner Cut Safe For Little Hands From Scratching And Poking. 3 Set Augmentative Communication Systems, Pocket Go-talk 5-level Communication Device Five Message Buttons At 2.2cm X 3.8cm (7/8” X 1 1/2”) Five Recording Levels 4.16 Minutes Total Recording Time (10 Seconds Per Message) Dial Controlled Volume Button Excellent Sound Quality Two Aa Batteries Included Low Power Consumption Record And Level Lock Capable 7.6cm X 13.6cm X 3.8cm 212 Grams (7.5 Oz) 4 Unit Call Lights, With Many Colors: Red, Blue, Green Or Mix Different Color For Different Service Type It Can Work With 30 Transmitter In Max. With Separate Output Power Supply: Dc5v The Prompting Sound Can Be Turned On/off Dimension: 78*78*60mm Color: White 2 Unit Dry Erase Sleeves, Premium Materials: Dry Erase Pockets Are Durable And Durable, Which Can Withstand Lots Of Student Wear And Tear. Fantastic Idea: You Print Of The Alphabet And Kids Can Use A Dry Erase Marker To Trace The Letters. Oversize: The Width And Length Is 10 Inch * 13 Inch. The Large Size Makes It Easy To Slip Papers In And Out. Saving Money: Dry Erase Sleeves Save Money On Having To Re-purchase Workbooks For Each Child, And You Would Not Have To Print Much Paper No Residue: They Write And Wipe Off Well After The Kids Use Them. Moreover, Dry Erase Pockets Sleeves Are Definitely Long Lasting. 5 Set Wind Up Toys, Powered By A Metal Spring That Is Tightened By Turning It, Classical Funny Simple Games, Non-toxic And Odor-free. Perfect Gift For Kids Party Favors, Goodie Bags, Classroom Rewards, Stocking Stuffers, Easter Egg Stuffers. Clockwork Toy, Each Character Does A Different Trick Such As Swimming In Water, Flipping, Sliding, Spinning, Walking, Shaking Head Or Tail And Many More To Be Discovered. Wind-up Toys Measure About 2 Inch, Including Dinosaur, Egg, Cat, Bird, Caterpillar, Beetle And Car Etc. Package Content: 16 No Duplicate Wind Up Toys (contents And Color May Vary). Every One Of Them Has A Windup Mechanism. 1 Set Wordless Picture Books, Language: ‎ English Hardcover: ‎ 32 Pages Reading Age: ‎ 4 - 6 Years Item Weight: ‎ 1.28 Pounds Dimensions: ‎ 10.25 X 0.5 X 12 Inches 5 Piece File Folders, File 2 Rings 2" Thick Or 3" Thick From Cover To Cover Front, Inside And Back Cover Are All Same Cover Size: Long 14"l X 11"w X 3" Thick Color(s): Black, Blue, Green, Red 10 Piece Articulation Cards, 7 Illustrated Card Decks (448 Cards, 3¼" X 4¼") – Each Deck Of 32 Picture-word Card Pairs Targets A Specific Speech Sound - P, B, T, D, M, J, Includes Storage Tins In A Metal Tote, Master Word Lists, 50 Smiley Face Tokens, And Game Ideas Card Set 1, Card Set 2 And Card Set 3 3 Set Audio Voice Recorder, Dimensions (w X H X D) 38.3 X 114.1 X 19.3 Mm Weight 74gg Colour Black Recording Format: Dss Digital Speech Standard Digital Speech Standardmp3 Standard Playing: 35 Hr Built-in Microphone Yes Pc Connectivity Yes Expandable Memory Yes Features Frequency Response: 50 - 20000hz Connections: Usb Display: Yes Battery Type: Alkaline Aaa 2 Unit Basic Vocabulary Board, Each Unit Comes With: Flashcards Smash Mat Trace And Color Cut And Glue Flipbook Black And White Versions Of All Activities! 2 Set Kidney-shape Table With Learner's Chair, Key Features Includes Four Stacking Chairs And One 36" X 72" Kidney-shaped Activity Table The 16" Seat Height Is Recommended For Fourth Through Sixth Grade Table Tabletop Material: 1 1/8" Thick Particleboard W/ Melamine Finish Edge Band Material: 3mm Pvc Leg Material: Powder-coated Tubular Steel Height: 21" - 30" Adjustable In 1" Increments Width: 36" Length: 72" Assembly Required Warranty: 10 Years Lead Time: Supply Chain Issues Are Effecting Lead Times. Need It Quickly? Please Call (877) 839-3330 To Confirm Shipping Timelines. Shipping Method: Ground Weight: 102.00 Pounds Table Height Adjusts From 21" - 30" Available In Several Color Combinations Chairs Suggested Grade Level: 4th - 6th Seat Material: Polypropylene Frame Material: 18-gauge Tubular Steel Frame Finish: Chrome Seat Height: 16" Fully Assembled Warranty: 10 Years 1 Set Abc = 310,183.00

Details: Description University Of The Philippines Baguio Governor Pack Road, Baguio City, Benguet, Car Vat Reg. Tin: 000-864-006-00007 Telephone No. 074-442-3484 Email Address: Spmo.upbaguio@up.edu.ph Request For Quotation (rfq) Procurement Project: Catering Services For Various University Activities On January - June 2025 Purchase Request No.: Hkp-2025-01-0003, Ovca-2025-01-0004, Oc-2025-01-0012, Bac-2025-01-0001, Css-2025-01-0003, Oc-2025-01-0011, Cs-2501-00002, Dic-2025-01-0002, Bio-2025-01-0001, Cac-2025-01-0008 Approved Budget For The Contract: ₱306,425.00 Date: 24 January 2025 Rfq No.: 0024 Mop: Np-small Value Procurement Instructions: 1. Accomplish This Rfq Correctly And Completely. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Bidder Or Any Of Your Duly Authorized Representative/s. 2. Bidder Should Attach A Copy Of The Latest #business Permit, Philgeps Registration Number And Notarized Omnibus Sworn Statement For An Approved Budget For The Contract (abc) Above ₱50,000 Except For Shopping As An Alternative Method Of Procurement That Requires The Latest Business Permit And Philgeps Registration Only. Quotations Exceeding The Abc Shall Be Rejected. In Addition: 2a. For Corporations & Cooperatives: A Notarized Secretary's Certificate Or Notarized Board Resolution; 2b. For Sole Proprietorship: A Notarized Special Power Of Attorney If The Oss Affiant Is Other Than The Sole Proprietor. 3. Warranty**, If Appropriate, Shall Be Six (6) Months For Supplies And Materials, One (1) Year For Equipment From The Date Of Acceptance Of The Procuring Entity. 4. Submit Your Quotation, Preferably Sealed, At The Supply And Property Management Office, Up Baguio Or Send To This Email Address Only - Spmo.upbaguio@up.edu.ph And Cc: Bac.upbaguio@up.edu.ph With The Subject Heading Rfq No. 0024 Not Later Than 8:30 Am On 29 January 2025. 5. Price Validity Shall Be For A Period Of 90 Calendar Days. 6. If Applicable, Bidders Shall Indicate The Brand And Model Number Of The Item/s Being Offered. 7. Failure To Follow These Instructions Will Disqualify Your Entire Quotation. Please Quote Your Lowest Government Price (including Vat) On The Item/s Listed Below, And State The Time Of Which You Can Make Delivery. The Information Stated Below Shall Be The Basis For The Evaluation And Calculation Of Your Quotation. Canvassed By: Brian D. Lumague Mary Anne R. Rivera (sgd.) Head, Spmo Item No. General Description Compliance With Technical Specifications (pls. Check) Brand (n/a If Not Applicable) Unit Of Mea-sure (ex. Pc, Lot, Kl) Qty Unit Price Total Price Quoted Unit Price* Total Quoted Price Yes No Catering Services For Various University Activities On January - June 2025 A. College Of Science 1 Supply And Delivery Of Food (catering Services) For College Based Meetings From January To March 2025 Lot 1 ₱ 20,000.00 ₱ 20,000.00 Requirements & Scope Of Work The Contract Will Be Awarded As Lot (abc For Snacks Is Php 100.00 Per Person Per Snack; For Lunch Is Php 200.00 Per Person) Offered Menu Must Be Submitted With The Bid Form Packed Meals (1 Snack And 1 Lunch) Good For 50 Persons (accumulated) For The Duration Of The Contract. Do Not Use Styrofoam, Disposable Cups And Spoons & Forks Instead Reusable Take Out Boxes And The Like Snack Consists Of At Least Pasta, Noodles, Bread Or Its Equivalent Lunch Consists Of At Least One Meat Or Fish And Vegetables, Generous Serving Of Rice & Dessert Or Its Equivalent Both Snacks And Lunch Includes Beverages B. Human Kinetics Program 2 Supply And Delivery Of Food (catering Services) For Hkp Faculty Meetings From January To March 2025 Lot 1 ₱ 7,875.00 ₱ 7,875.00 Requirements & Scope Of Work The Contract Will Be Awarded As Lot (abc For Snacks Is Php 125.00 Per Person Per Snack; For Lunch Is Php 250.00 Per Person) Offered Menu Must Be Submitted With The Bid Form Packed Meals (1 Snack And 1 Lunch) Good For 21 Persons (accumulated) For The Duration Of The Contract. Do Not Use Styrofoam, Disposable Cups And Spoons & Forks Instead Reusable Take Out Boxes And The Like Snack Consists Of At Least Pasta, Noodles, Bread Or Its Equivalent Lunch Consists Of At Least One Meat Or Fish And Vegetables, Generous Serving Of Rice & Dessert Or Its Equivalent Both Snacks And Lunch Includes Beverages C. College Of Social Sciences 3 Lunch & Pm Snacks For The College Faculty Meeting On February 17, 2025 Lot 1 ₱ 20,000.00 ₱ 20,000.00 Place Of Delivery: Css Avr Time Of Delivery: 9:40 Am Am Snack: Banana Chocolate Chip Muffins, Overflowing Coffee, Juice Meal: Plain Rice, Pork Binagoongan, Chicken Adobo, Chopsuey, Mixed Fruits, Iced Tea Pm Snack: Buko Pie, Juice Good For 40 Persons D. Office Of The Chancellor 4 Supply And Delivery Of Food (catering Services) For Executive Committee Meetings From January To June 2025 (once Every Quarter) Lot 1 ₱ 28,800.00 ₱ 28,800.00 Requirements & Scope Of Work The Contract Will Be Awarded As Lot (abc For Snacks Is Php 125.00 Per Person Per Snack; For Lunch Is Php 250.00 Per Person) Offered Menu Must Be Submitted With The Bid Form Buffet Meals (2 Snacks And 1 Lunch) Good For 24 Persons (accumulated) For The Duration Of The Contract. Do Not Use Styrofoam, Disposable Cups And Spoons & Forks Instead Reusable Take Out Boxes And The Like Snack Consists Of At Least Pasta, Noodles, Bread Or Its Equivalent Lunch Consists Of At Least One Meat Or Fish And Vegetables, Generous Serving Of Rice & Dessert Or Its Equivalent Both Snacks And Lunch Includes Beverages 5 Supply And Delivery Of Food (catering Services) For Executive Staff Meetings From January To June 2025 (once A Month) Lot 1 ₱ 72,000.00 ₱ 72,000.00 Requirements & Scope Of Work The Contract Will Be Awarded As Lot (abc For Snacks Is Php 125.00 Per Person Per Snack; For Lunch Is Php 250.00 Per Person) Offered Menu Must Be Submitted With The Bid Form Buffet Meals (2 Snacks And 1 Lunch) Good For 60 Persons (accumulated) For The Duration Of The Contract. Do Not Use Styrofoam, Disposable Cups And Spoons & Forks Instead Reusable Take Out Boxes And The Like Snack Consists Of At Least Pasta, Noodles, Bread Or Its Equivalent Lunch Consists Of At Least One Meat Or Fish And Vegetables, Generous Serving Of Rice & Dessert Or Its Equivalent Both Snacks And Lunch Includes Beverages E. Office Of The Vice Chancellor For Administration 6 Supply And Delivery Of Food (catering Services) For Various Ovca Proper And Committee Meetings For The Period February - March 2025 Lot 1 ₱ 30,000.00 ₱ 30,000.00 Requirements & Scope Of Work The Contract Will Be Awarded As Lot (abc For Snacks Is Php 125.00 Per Person; For Lunch Is Php 250.00 Per Person) Offered Menu Must Be Submitted With The Bid Form Packed Meals (1 Snack And 1 Lunch) Good For 80 Persons (accumulated) For The Duration Of The Contract. Do Not Use Styrofoam, Disposable Cups And Spoons & Forks Instead Reusable Take Out Boxes And The Like Snack Consists Of At Least Pasta, Noodles, Bread Or Its Equivalent Lunch Consists Of At Least One Meat Or Fish And Vegetables, Generous Serving Of Rice & Dessert Or Its Equivalent Both Snacks And Lunch Includes Beverages F. Bids And Awards Committee 7 Supply And Delivery Of Food (catering Services) For Three (3) Months For Bac Related Activities For The Period Of January - March 2025 Lot 1 ₱ 90,000.00 ₱ 90,000.00 Requirements & Scope Of Work The Contract Will Be Awarded As Lot (abc For Snacks Is Php 125.00 Per Person; For Lunch Is Php 250.00 Per Person) Offered Menu Must Be Submitted With The Bid Form Packed Meals (1 Snack And 1 Lunch) Good For 240 Persons (accumulated) For The Duration Of The Contract. Do Not Use Styrofoam, Disposable Cups And Spoons & Forks Instead Reusable Take Out Boxes And The Like Snack Consists Of At Least Pasta, Noodles, Bread Or Its Equivalent Lunch Consists Of At Least One Meat Or Fish And Vegetables, Generous Serving Of Rice & Dessert Or Its Equivalent Both Snacks And Lunch Includes Beverages G. College Of Arts And Communication 8 Am Snacks & Lunch For The College Faculty Meeting On February 17, 2025 Lot 1 ₱ 7,500.00 ₱ 7,500.00 The Contract Will Be Awarded As Lot (abc For Snacks Is Php 125.00 Per Person; For Lunch Is Php 250.00 Per Person) Place Of Delivery: Cac Lounge Good For 20 Persons Buffet Style Am Snack: Bread With Assorted Spread (liver Spread, Cheese, Sandwich Spread And Its Equivalent); Iced Tea (at Least 5 Liters) Meal: Cooked Rice (at Least 3000g); Any Chicken Viand (at Least 3000g), Any Vegetable Viand (at Least 2500g), Any Fish Viand (3500g), Buko Pandan (served In At Least 240g Per Cup), Fruit Juice (at Least 6 Liters) H. Denr-fasps Project 9 Fgd Presentation On February 3, 2025 Lot 1 ₱ 4,375.00 ₱ 4,375.00 Pm Snacks For Denr Project Focused Group Discussion Presentation Together With Local Government Representative Of Selected Barangays Of Baguio City On Febuary 3, 2025 From 1:00 Pm To 5:00 Pm Menu: Creamy Carbonara Pasta (at Least 80 Grams) With At Least 1-2 Toasted Bread And Fruit Juice (at Least 350 Ml) Appropriate Utensils Should Be Included Place To Deliver: University Of The Phillplnnes Baguio- College Of Science- Biology Department Time Of Delivery: 2:30 Pm Good For 35 Persons 10 Exhibit Opening On February 14, 2025 Lot 1 ₱ 9,375.00 ₱ 9,375.00 Pm Snacks For Denr Project Exhibit At Bell House Of Camp John Hay On Febuary 14, 2025 From 1:00 Pm - 5:00 Pm Menu: 4pcs. Of Palitaw With One Or Two Slices Of Biko (diket) And Fruit Juice (atleast 350 Ml) Apprupriate Utensils Should Be Included Place To Deliver: Bell House Of Camp John Hay Time Of Delivery: 2:30 Pm Good For 75 Persons I. Digital Innovation Center Catering Services For The Period February-may 2025 Snack And Lunch For 11 Pax At 375.00 Per Pax Lot 1 ₱ 16,500.00 ₱ 16,500.00 February 2025 Snack: Pancit (at Least 175g) Puto Beverage (fruit Juice Or Soda) Lunch: Pork Steak (at Least 175g) Vegetable Stir Fry (at Least 150g) Rice (1 Cup) Beverage (fruit Juice Or Soda) March 2025 Snack: Spaghetti (at Least 175g) Garlic Bread Beverage (fruit Juice Or Soda) Lunch: Chicken Or Pork Afritada (at Least 175g) Buttered Vegetable (at Least 150g) Rice (1 Cup) Beverage (fruit Juice Or Soda) April 2025 Snack: Ensaymada Beverage (fruit Juice Or Soda) Lunch: Sweet And Sour Pork (at Least 175g) Fried Chicken Tenders Rice (1 Cup) Beverage (fruit Juice Or Soda) May 2025 Snack: Ham And Cheese Sandwich Beverage (fruit Juice Or Soda) Lunch: Beef Broccoli (at Least 175g) Lumpiang Shanghai Rice (1 Cup) Beverage (fruit Juice Or Soda) General Requirements For Catering Services For Each Activity Stated Above Additional Conditions Delivery Of Snacks Not Later Than 9:30 Am (for Am Snacks) And/ Or 2:30 Pm (for Pm Snacks) And Meals Not Later Than 11:30 Am Supplier Will Be Informed On The Following 2-3 Days Before The Scheduled Event: - Room/ Hall Where Will The Food Be Delivered - Date Of Delivery - Guaranteed Number Of Person Per Activity Mode Of Payment Bid Price Inclusive Of All Taxes And Charges No Downpayment Will Be Made Purchase Order Will Be Made Monthly & Billed Monthly Payment Will Be Based On The Actual Number Of Persons On The Specific Activity Contract Award: Per Line Item (which Means That Supplier Can Bid For One Item Only Or Can Bid For All The Items Because Awarding Will Be Per Line Item) Delivery Period: January - June 2025 A Recently Expired Mayor’s/business Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Concerned Local Government Unit. However, A Copy Of Your Mayor's Or Business Permit Shall Be Required To Be Submitted After Award Of Contract But Before Payment. *indicating A Price/amount Under "quoted Unit Price" Shall Mean Complying With The Technical Specification Of The Item Without Checking The Compliance Column Otherwise Provide A Counter-offer **warranty Included ꙳꙳꙳ Nothing Follows ꙳꙳꙳ Total: ₱ 306,425.00 Total Quoted Amount In Words: After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Items At Prices Noted Above. Name Of The Company: Tel. No. : Address: Fax No. : Name Of Representative: Email Address: Position: Signature: Date:

Details: The Martinsburg Va Medical Center Is Conducting This Sources Sought To Identify Contractors Who Possess Capabilities To Provide The Services Described In The Statement Of Work Below. as Permitted By The Far Part 10, This Is A Market Research Tool Being Utilized For The Informational And Planning Purposes. Your Responses Will Assist The Government In The Development Of Its Acquisition Strategy. response Is Strictly Voluntary It Is Not Mandatory To Submit A Response To This Notice To Participate In Formal Rfq Process That May Take Place In The Future. However, It Should Be Noted That Information Gathered Through This Notice May Significantly Influence Our Acquisition Strategy. All Interested Parties Will Be Required To Respond Separately To Any Solicitation Posted As A Result Of This Sources Sought Notice. respondents Will Not Be Notified Of The Results Of The Evaluation. We Appreciate Your Interest And Thank You In Advance For Responding To The Sources Sought. this Service Will Be Implemented Using The North American Industry Classification System (naics) Code 485999. if A Small Business Is Interested In This Procurement, They Must Provide At Least 51 Percent Of The Services Rendered. notes all Capability Statements/responses To This Sources Sought Notice Shall Be Submitted Via Email Only To Tracy.dotson@va.gov. Telephone, Fax, Or Any Other Form Of Communication Inquiries Will Not Be Reviewed Or Accepted. Responses To This Sources Sought Notice Must Be Received No Later Than January 22, 2025 At 3:00 P.m. (eastern Standard Time). This Sources Sought Notice May Or May Not Assist The Va In Determining Sources Only. A Solicitation Is Not Currently Available. If A Solicitation Is Issued, It May Or May Not Be Announced At A Later Date, And All Interested Parties Shall Respond To That Solicitation Announcement Separately From The Responses To This Sources Sought Notice. disclaimer this Rfi Is Issued For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked A Proprietary Will Be Handled Accordingly In Accordance With (iaw) Federal Acquisition Regulation (far) 15.201(e), Rfis May Be Used When The Government Does Not Presently Intend To Award A Contract, But Wants To Obtain Price, Delivery, Other Market Information, Or Capabilities For Planning Purposes. Responses To These Notices Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Incurred Associated With Responding To This Rfi. interested & Capable Responses nco 5 Is Seeking Responses From Businesses That Are Interested In This Procurement And Consider Themselves To Have The Resources, Rights, And Capabilities Necessary To Provide These Services. Please Respond With Your: business Name (including Unique Entity Id (sam.gov), Business Type, Socio-economic Status (e.g., Veteran-owned, Woman-owned, Disadvantaged Small Business, 8(a), Etc.), Person Of Contact (including Telephone Number & Email Address). capability Statement gsa Contract Number, If Applicable, To Include Naics brief Summary Of Categories Of Professional Services That Your Company Can Provide. applicable Certification(s)/licenses performance Work Statement (pws) general Procedure: the Contractor Shall Be Required To Furnish All Necessary And Appropriate Labor, Supervision, Materials, Equipment, And Supplies To Provide Valet Parking Services In Accordance With The Terms And Conditions Of The Resulting Contract And The Specifications And Requirements, As Specified Herein. The Contractor Shall Provide Valet Parking Services To Alleviate Parking Problems Experienced At The Martinsburg Vamc. The Valet Parking Services Shall Be Intended To Accommodate Veteran Patients, Their Family Members, And Visitors. The Contractor Shall Be Required To: staffing: The Contractor Will Provide Adequate Staffing Of Customer Service Attendant(s) For The Hours Of Operation Specified. The Contractor Will Always Provide Adequate On-site Supervision To Handle Customer Concerns And Parking Incidents. The Contractor Does All Recruiting, Hiring, Training, And Supervising. contractor Should Base Their Plan On The Martinsburg Vamc Serving Approximately 100 Vehicles Per Day. provide Va Approved Valet Claim Checks, Securing Keys, Parking Vehicles, Delivering Vehicles, And Directing Certain Valet Vehicles To And From The Valet Greeting Area. provide Professional Valet Booth(s), Locking Key Cabinet(s), Safety Cones, Signs, Roadblocks And Other Supplies And Materials And/or Miscellaneous Items Necessary To Operate And Manage Valet Services. All Signs Shall Be At Least 30 X 30 . Hand-written Signs Shall Not Be Allowed. blocking Of Any Roadway Or Re-routing Of Traffic Must First Be Approved By The Martinsburg Va Police Department. the Contractor Will Provide Va Approved Walkie-talkies Or Radios For The Valet Staff To Communicate With Each Other While Conducting Their Normal Duties Of Valet Parking. contractor Will Provide And Install A Minimum Of 2 "no Tipping" Signs. Signs Must Be A Minimum Of 30 X30 . The No Tipping Policy Shall Be Strictly Enforced. Valet Parking Attendants And All Other Parking Staff Shall Be Restricted From Accepting Tips Of Any Kind. contractor Will Provide And Install A Minimum Of 2 Insurance Liability Signs For Vehicle Damage Claims. Signs Must Be A Minimum Of 30 X30 . provide Experienced, Fully Trained, And Professional Valet Parking Attendants To Perform The Valet Parking Services. constantly Assess Va Parking Situation Taking Into Consideration All Parking Spaces Available To Adjust The Level Of Parking Service And Personnel Required To Perform Under The Contract Without Exceeding The Required Wait Time To Valet Parked And Retrieved Vehicles. provide Parking And Traffic Control Recommendations As Deemed Appropriate And Necessary To Provide Quality Services. location: martinsburg, Wv Va Medical Center: 510 Butler Ave, Martinsburg, Wv 25405 period Of Performance: base Period (year) + 4 Option Periods (year). site Inspection: a Pre-proposal Site Inspection / Walk-through For All Interested Contractors Will Be Scheduled By The Contracting Officer For Any Interested Contractors. All Interested Contractors Are Encouraged To Attend The Site Inspection And Walk-through Of The Martinsburg Va Facility. Only One Walk-through For This Solicitation Shall Be Conducted. The Intent Of The Site Inspection Is To Give All Interested Contractors An Opportunity To Get Familiar With The Parking Lots Designated To Be Used For The Valet Parking. note: The Contractor Shall Be Responsible For All Costs And Travel Expenses Associated With The Site Inspection Visit. While Not Mandatory, Failure To Attend The Site Inspection Walk-through Of The Martinsburg Va Facility Shall Not Release The Contractor From Complying With The Terms, Conditions, Specifications, And Requirements Of The Resulting Contract. designated Valet Parking Lots: the Martinsburg Vamc Will Designate Parking Lots To Be Used For The Valet Parking Services. the Contractor Shall Have Complete Control Of Vehicles Parked In Designated Valet Parking Area(s) In The Context Of Maximizing The Space Available And Facilitating A Smooth Operation. The Martinsburg Vapd Will Always Maintain Authority Over All Vehicles And Parking At The Facility. If Deemed Necessary By The Martinsburg Vamc, The Contractor Shall Be Required To Double Stack Vehicles To Maximize The Space Available. The Contractor Shall Be Responsible For Parking Control And Monitoring The Designated Parking Lots Assigned For The Valet Operation. contractor Responsibilities: the Contractor Shall Provide Consistent, Responsive, Secure, And Efficient Valet Parking Operations. The Contractor Shall Be Responsible For Providing Patrons With A Valet Claim Check/ticket, Securing Keys, Parking, Delivering, And Directing Certain Valet Vehicles To And From The Valet Drop Off And Pick Up Area. The Martinsburg Vamc Will, At Their Discretion, Provide The Contractor With Instructions On Addressing The Issue Of Who Qualifies For Valet Parking Services And The Method Of Identifying Such Individuals. Such Instructions May Include Verbiage Such As Vehicles Requiring Valet Parking Shall Be Stopped By The Valet Parking Attendants, Who Shall Be Required To Ask The Patients Or Drivers For An Appointment Letter, Va Patient Identification Card, Clinic Or Healthcare Service Which Will Be Visited And The Estimated Time Of Departure. Valet Parking Attendants Shall Also Be Required To Ask Visitors The Name Of The Inpatient Veteran, Name Of Event Attending Or The Name Of The Va Staff That Will Be Visited And Their Estimated Time Of Departure. The Exact Procedures Will Be Provided To The Contractor By The Cor Covered In This Statement Of Work. The Contractor Shall Be Responsible For Screening Out Vendors And Employees, Except Those With Handicapped Placards Or License Plates, From Inappropriately Using The Valet Parking Services At The Martinsburg Vamc. All Vehicles Parked By The Parking Attendants Shall Be Locked And Secured. Driver S Keys Shall Be Secured At The Valet Booth(s). A Claim Check Shall Be Issued To The Driver Using The Valet Service. Claim Checks Shall Contain The Valet Company S Liability Disclaimer And Contact Information. Contractor Shall Be Responsible For Directing Vehicles Not Wishing To Participate In The Valet Parking Services To Other Designated Parking Locations. Contractor Shall Designate A Full-time Supervisor To Be On Site During Set-up, Tear-down Operations, And Performance Of The Work. The Contractor Shall Always Provide Adequate On-site Supervision To Handle Customer Concerns And Parking Incidents. Duties Of The Supervisor Shall Also Include But Not Be Limited To Customer Relations, Training, And Improving All Valet Services And Coordinating All Work And Additional Services With The Contracting Officer S Representative (cor). Contractor Shall Coordinate With The Cor To Designate Front Drop Off And Pick Up Area(s) Near The Entrance For Loading And Unloading Of Handicapped Patients/patrons So As Not To Interfere With Normal Valet Parking Operation. Handicapped Patients/patrons Shall Be Permitted To Pull To The Designated Drop Off And Pick Up Area(s) Near The Entrance. The Parking Attendants Shall Then Be Required To Park The Vehicles Or Direct The Drivers To A Handicap Space For Self-parking. Patients With Handicap Placards Or License Plates On Their Vehicles Shall Be Given The Option Of Self-parking In Handicapped Slots Or Valet Parking. Non-handicapped Employees Shall Be Directed To Self-park. patient Assistance: the Service Shall Include Assisting Patients And Their Families Who Request Front Door Service, Assisting With Wheelchairs And Other Devices In And Out Of Cars, And Parking Of Automobiles To Include Vehicles With Adaptive Equipment. To Reduce The Risk Of Injuries To Valets And Potentially To The Veterans Using Valet Services, Valets Will Be Responsible For Following The Martinsburg Vamc S Practices For Safe Patient Handling And Mobility (sphm) Program. The Contractor Shall Deliver These Wheelchairs Upon Patient Or Caretaker Request To The Patient To Facilitate Patient Travel From The Drop Off Area To The Volunteer Desk At The Hospital Entrance, If Requested. The Contractor Will Not Escort Patients Within The Hospital/facility. All Wheelchairs Used Will Be Noted On The Contractor Ticket For Accountability. Parking Patrons Shall Be Always Treated Courteously And With Respect. Parking Attendants Shall Drive Slowly And Cautiously, Paying Attention To Pedestrian Traffic. training/licenses/qualifications: the Contractor Shall Provide Bonded, Fully Trained, Experienced Parking Attendants Who Possess A Valid State Driver S License, Be U.s. Citizens And Be Fluent In The English Language. Contractor Personnel Shall Be At Least 18 Years Of Age, Have No Criminal History, And Be Able To Perform All General Duties, Functions, And Activities As Required. Contractor S Staff Qualifications Shall Also Include Expertise In The Proper Operation Of All Types Of Motor Vehicles, And A Commitment To The Highest Level Of Respect, Courtesy, Compassion, And Safety. The Contractor Shall Furnish At Its Cost, Evidence Of Qualifications And Competency Assessment Of All Employees. Such Evidence Shall Include But Are Not Limited To Copies Of Driver S Licenses, Dmv Printouts, And Copies Of Security Background Checks. To Be Eligible To Perform Under This Contract, Each Contract Employee Must Satisfactorily Complete Va Talent Management System (tms) Web Base Training. Effective March 23, 2012, All Contractors Are Required To Begin Using Tms For Their Mandatory Training, Utilizing The Create New Feature At Contract Employees Will Self-enroll Into Tms And Select The Following Courses. Training Is To Be Accomplished Outside Of Contract Duty Hours. Tms Courses Will Require Completion Annually. The Contractor Shall Be Responsible For Providing A Facility Orientation To All Valet Parking Attendants And Offer A Training Program That A Minimum Will Include The Following: security patient Privacy safety emergency Procedures accidents / Injuries communication (with Contractor Staff /martinsburg Vamc). the Contractor Shall Maintain Documentation Certifying That All Employees Assigned To The Contract Have Received The Training. If Deemed Necessary By The Government, Additional Training Shall Be Offered At The Martinsburg Vamc And Scheduled At The Post Award Meeting On A Mutually Agreeable Date And/or Coordinate With The Cor. In Addition To Safe Driver Training, The Minimum Customer Service Training Must Be Provided And Documented For Each Employee. the Importance Of A Positive Attitude verbal Communication Methods That Are Courteous And Informative non-verbal Communication appearance volume And Tone face To Face Contact self-evaluation violence In The Workplace contractor Employees Must Know Basic Directions For Destinations In The Hospital And Around The Community. Contractor Employees Must Keep The Work Area Clean And Always Appear Ready For Work, Even When No Customers Are Present. uniforms: the Contractor S Uniform Should Be Prior Approved By The Cor Before Initial Commencement Of Work. The Selected Uniform Will Be Standard For All Employees. At No Time Will Any Contract Employee Wear Their Own Jacket, Shirt, Pants, Coat, Gloves, Or Head Gear. All Cold Weather/rain Gear Will Be Supplied By The Contract Company. Uniforms Shall Facilitate Easy Identification Of Contractor Employees By Employee Name And Company Name. Uniforms Shall Be Always Worn During Performance Of Contract Duties. Uniforms Will Be Neat In Appearance. Shirts And Pants Will Be Ironed Or Pressed. The Cor Can Request A Contractor To Be Sent Home If Their Uniform Is Not Presentable. The Contractor Will Replace Any Worn-out Or Torn Uniform At No Cost To The Government Or Employee. Approved Uniforms And Related Accessories, Listed Below, Do Not Have To Be New But Must Be In Good Condition: Shirt, Button Up, Long Sleeve (cold Weather Days) Shirt, Button, Up Short Sleeve trouser, All-season Weight jacket, Winter, Heavyweight Artic Field Coat jacket, Lightweight trench Raincoat winter Gloves, (pair), (color To Match Accessories) hat With Company Logo Or Valet Written On Face, (color To Match Accessories) earmuffs Or, (color To Match Accessories) the Outermost Article Of Clothing Being Worn By The Valet Staff Above The Waist Shall Have, In Whole Or In Part, Reflective Material To Improve Worker Visibility To Alert Drivers Of The Valet S Presence When Walking Through The Lots. The Reflective Gear Shall At A Minimum Meet Ansi 107-2015 Type R, Class 2 Requirements. claims/damage: the Contractor Shall Be Completely Liable For All Vehicle Damages Occurred While At The Possession Of The Valet Staff And/or Service. All Vehicle Damage Claims Brought To The Attention Of The Valet Contractor Shall Be Immediately Investigated And Validated Claims Shall Be Processed For Settlement. any Claims Of Damage Or Missing/stolen Property Involving Patient/customer S Vehicles Shall Be The Responsibility Of The Contractor. The Va Assumes No Responsibility For Such Claims. All Claims Shall Be Directed To And Handled By The Contractor Supervisor Who Shall Immediately Notify The Cor And The Va Police Department (vapd). Corrective Actions To Resolve All Claims Shall Commence Immediately. All Claims Shall Be Settled Within Fourteen (14) Working Days Unless Extenuating Circumstances Warrant Additional Time And Is Authorized By The Contracting Officer. All Vehicle Accidents Or Theft Claims Should Be Immediately Reported To The Va Police For Investigation. martinsburg Vamc Hours Of Operation: proposed Hours Of Operation Are 6:30 Am To 5:00 Pm Monday Through Friday For The Martinsburg Vamc, Excluding Federal Holidays. The Cor Will Notify The Contractor If Valet Will Be Operating On Other Days Specifically Declared By The President Of The United States To Be A Federal Holiday. The Contractor Shall Adjust The Level Of Valet Parking Staff As Necessary To Ensure An Efficient Operation. If Deemed Necessary By The Government, The Hours Of Operation May Be Periodically Adjusted Based Upon Volume And Demand. The Medical Center Does Not Routinely Close For Adverse Weather Conditions. When The Medical Center Remains Open During Adverse Weather Events It Is Expected Sufficient Staff Will Be On Site To Operate The Valet Service. At 5:00 Pm, The Parking Attendants Shall Turn Over All Remaining Keys And Associated Tickets To The Aod. A Log Will Be Completed For All Remaining Keys Turned Over To The Aod. The Log Will Include The Ticket Number, Vehicle Make And Model, Registration Number, Valet Attendant S Name That Tuned Keys Over To The Aod, And The Aod S Name With Signature That Took Responsibility Of The Keys. The Aod Will Then Lock Up The Keys In The Aod S Safe. federal Holidays: listed Below Are The Eleven Federal Holidays: No Work Will Be Performed On These Days. new Year S Day january 1 martin Luther King S Birthday third Monday In January president S Day third Monday In February memorial Day last Monday In May juneteenth june 19 independence Day july 4 labor Day first Monday In September columbus Day second Monday In October veterans Day november 11 thanksgiving Day fourth Thursday In November christmas Day december 25 special Events: the Contractor Shall Be Notified In Advance Of Any Special Events Which Might Cause Parking Problems Because Of Additional Patients, Patrons, Or Visitors To The Medical Center. Contractors Shall Be Required To Adjust The Level Of Parking Staff To Accommodate The Workload Or Extra Vehicle Volume. proposed Plan: after Notification Of Contract Award, The Contractor Shall Have Forty-five (45) Calendar Days For Full Operational Implementation. This Must Include Finalizing Staff Requirements, Including Government-administered Background Investigations, Etc. The Contractor Shall Be Required To Implement Their Proposed Valet Parking Service Plan And Perform On A Day-to-day Basis For The Duration Of The Contract. ordering Activity: the Contractor Shall Not Accept Any Instructions Issued By Any Person Other Than The Contracting Officer Or Delegated Government Representative Such As The Cor Who Is Acting Within The Limits Of His/her Authority. quality Assurance: the Contractor Shall Be Responsible For Complying With All Appropriate Regulations And Guidelines Of The Occupational Safety And Department Of Transportation, And/or Any Other Pertinent Federal, State, And Local Policies Relating To The Herein Mentioned Work Or Valet Parking Services. The Contractor Shall Always Provide Adequate On-site Supervision To Achieve Quality Assurance And To Handle All Customer Concerns And Parking Incidents. All Tasks Accomplished By The Contractor Personnel Shall Be Performed To Preclude Damage Or Defacement To Vehicles Or Government-owned Furnishings, Fixtures, Equipment, And Facilities. The Contractor Shall Report Any Damage Observed Or Caused By The Contractor Personnel To The Cor. The Contractor Shall Be Responsible For The Replacement Of Items Or To Repair Vehicles Or Facilities To Previous Condition If The Contractor Is Determined To Be At Fault For The Damage. Complaints: the Contractor Shall Promptly And Courteously Respond To Complaints Within 10 Working Days, Including Complaints Brought To The Contractor S Attention By The Contracting Officer Acting As The Quality Assurance Evaluator (qae). The Contractor Shall Maintain A Written Record Of All Complaints, Both Written And Oral Showing The Identity Of The Individual, The Nature Of The Complaint, And The Contractor S Response. The Contractor Shall Permit The Government To Inspect Such Records Upon Request. reports: the Contractor Shall Establish A Method To Validate The Number Of Vehicles Parked Per Day (i.e., Parking Stubs) And Submit A Monthly Report To The Contracting Officer And Cor Within Seven (7) Calendar Days After Each Month Ends. The Report Shall Summarize The Number Of Vehicles Parked By Valet Attendants Based On Date And Time (sorted By Morning Or Afternoon). The Report Shall Also Identify The Peak Hours During The Day And How Many Vehicles Were Parked During Those Peak Hours. The Report Shall Also Include Any Incidents, Accidents Or Special Situations With Patients, Visitors, Va Employees, Or Va Volunteers. The Reports Must Be Legible And Easy To Understand. Reports Should Be Signed By The Supervisor And/or Authorized Representative Of The Contractor. Contractor May Provide For Approval A Sample Of The Types Of Report Forms Used On Similar Projects. disruptive Behavior: the Contractor Shall Always Provide Adequate Onsite Supervision To Handle Disruptive Behavior Of Any Parking Attendant Performing Under The Contract. The Contractor Agrees To Permanently Remove Any Member Of Its Parking Staff From Performing Work Associated With This Contract, At The Sole Discretion Of The Va. Any Legal Misconduct Or Violations Will Be Subject To Governing Security, Law Enforcement, And Standards Of Conduct On Veterans Affairs Property, 38 Cfr 1.218. examples Of Misconduct Include: neglect Of Duty, Including Sleeping While On Duty, Unreasonable Delays, Or Failure To Carry Out Assigned Tasks, Conducting Personal Affairs During Official Time, Lack Of Or Limited Productive Service And Refusing To Render Assistance Or Cooperate In Upholding The Integrity Of The Valet Program At The Worksite. disorderly Conduct, Use Of Abusive Or Offensive Language, Quarreling, Rude Inappropriate Comments, Sexual Harassment, Intimidation By Words Or Actions, Or Fighting. Also, Participation In Disruptive Activities Which Interfere With The Normal And Efficient Operations Of The Government. Theft, Vandalism, Immoral Conduct, Or Any Other Criminal Act. selling, Consuming Or Being Under The Influence Of Intoxicants, Drugs, Or Substances Which Produce Similar Effects. involvement In Commercial Activities At Any Time While On Government Controlled Property (included Soliciting Sale, Donation, Etc., From Employees, Patients, Or Others). Improper Use Of Official Authority Or Credentials. unauthorized Use Of Communications Equipment Or Government Property (includes Unauthorized Or Personal Use Of Internet, Long Distance Telephone Services Or Government Computer Network). Possession Or Misuse Of Weapons(s). Receiving Gifts Or Tips From Va Employees, Veterans, Or Their Family Members. the Contracting Officer, In Conjunction With Cor Will Make All Determinations Regarding The Removal Of A Person(s) From The Work Site(s). In The Event Of A Dispute, The Contracting Officer Will Make Final Determination. Specific Reasons For Removal Of An Employee(s) Will Be Provided In Writing To The Contractor. buses Or Large Vehicle: patients Driving Buses Or Large Motor Vehicles Shall Be Directed To Self-park Their Vehicles In The Parking Areas Designated By Va Police. changes To Parking Lots: no Alterations To The Parking Lots Shall Be Permitted. government Responsibilities: the Participating Va Medical Center Shall Provide Orientation And Training On Va Policies And Procedures Relating To Security, Patient Privacy, Safety, Emergency Procedures, Accidents/injuries, And Communication With Va Staff. The Required Training Shall Be Scheduled At A Post Award Meeting On A Mutually Agreeable Date And Coordinated With The Cor. contractor Submittals / Insurance Requirements: contractor Shall Be Required To Provide Copies Of The Following: automobile Liability Insurance For Bodily Injury And Property Damage On All Vehicles Used In The Performance Of This Contract. Policies Covering Automobiles Operated In The United States Shall Provide Coverage Of At Least $200,000 Per Person And $500,000 Per Occurrence For Bodily Injury And $20,000 Per Occurrence For Property Damage. the Contractor Shall Assume Full Responsibility For All Contracted Employees And Maintain At The Minimum Liability Insurance. Proof Will Be Required, And Spot Checked Randomly Per Employee. background Screening: in Accordance With Vha Directive 0710 All Contractor Personnel Providing Services Under This Contract Shall Be The Subject To A Background Screening And Must Receive Favorable Adjudication From The Va Prior To Contract Performance. The Level Of Screening For This Contract Is: Special Agency Check (sac). Any Employee Whose Background Investigation Yields Unfavorable Results Shall Be Removed Immediately From Performance Under This Contract. In The Event The Screening Is Not Completed Prior To Contract Performance, The Contractor Shall Be Responsible For The Actions Of Those Individuals Performing Under The Contract. contractor Personnel Security Requirements: all Contractor Employee S Will Be Issued A Government Piv Card (id Card). The Piv Card Must Be Always Worn While On Va Property. The Piv Card Must Be Worn Above The Waist And Clearly Visible. The Contractor Shall Be Required To Coordinate With The Cor To Obtain The Va Provided Piv Cards For All Valet Parking Staff. All Va Provided Piv Cards Shall Be Returned If The Contractor Employee Leaves The Employment Of The Contractor, At The End Of The Contract Or Upon Completion Of Service. the C&a Requirements Do Not Apply, And That A Security Accreditation Is Not Required. drug/alcohol Policy: contractor Shall Ensure That All Valet Parking Staff Performing Under This Contract Complied With The Martinsburg Vamc Alcohol And Drug Free Workplace Policy. The Contractor Shall Be Expected To Conduct Random Alcohol And Drug Tests On All Valet Parking Staff. Random Alcohol And Drug Tests Shall Be Conducted At Least Once A Year On Each Employee. Proof Of Drug Screen Shall Be Submitted To The Cor And Will Be The Responsibility Of The Contractor To Cover The Cost. Valet Parking Staff Shall Also Be Subject To Drug And Alcohol Testing When Reasons Exist To Suspect The Use Of Illegal Drugs And/or Alcohol While On Duty That Impaired Judgment, Performance, Operation Of Vehicles And The Safety Of Veteran Patients, Va Employees, Visitors, Voluntaries And/or Other Valet Parking Staff. Upon Request, The Contractor Shall Be Expected To Provide Evidence Or Copy Of The Results Of Employee Drug And Alcohol Testing. This Shall Also Be At The Expense Of The Contractor. smoking Policy: vamc Martinsburg Is A Smoke/vape Free Campus. Smoking Or Vaping Is Not Permitted Within Or Around The Va Facility Grounds. cell Phone: cell Phone Use Shall Not Be Permitted While Parking Vehicles. performance Standards Summary: performance Standards Define Desired Services. The Government Performs Surveillance To Determine If The Contractor Exceeds, Meets, Or Does Not Meet These Standards. performance Objective acceptable Quality Level (aql) method Of Surveillance incentive/disincentive contractor Shall Perform All Of The Requirements In Accordance With Sow Section General Procedures -valet 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Patient Assists 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Training 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Uniforms 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow: Reporting Requirements 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Claims For Damages 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. place Of Performance martinsburg Va Medical Center 510 Butler Ave martinsburg, Wv 25405

Details: The subject of the proceedings is the provision of vulcanization services in official vehicles used by the District Police Headquarters in Miechów. As part of the Subject of the Order, the Contractor undertakes to perform vulcanization services in company vehicles, i.e.: passenger cars (including SUVs) and commercial vehicles (including off-road vehicles), on wheels with aluminum and steel rims, as well as those with a tire pressure control system. Kolo. The scope of the service includes: - Comprehensive tire replacement, which should be understood as: removing the wheel from the vehicle, removing the tire from the rim, installing a tire appropriate to the season on the rim, equalizing the tire pressure and balancing the wheel mounted on the vehicle, installing the wheel on the vehicle, as well as If necessary, calibration of the wheel pressure sensor, - comprehensive replacement of complete wheels, which should be understood as: removing the wheel from the vehicle, equalizing the tire pressure and balancing the wheel that is to be mounted on the vehicle, installing the wheel on the vehicle, as well as if necessary Performing the Calibration of the Wheel Pressure Sensor, - wheel balancing, which should be understood as: removing the wheel from the vehicle, balancing the wheel, installing the wheel on the vehicle, - vulcanization repairs, which should be understood as: removing the wheel from the vehicle, repairing the damage (through, among others, patching) Tires, replacing valves, valves, sealing the rim seat), mounting the tire on the rim, equalizing the pressure, balancing the wheel and installing it on the vehicle, as well as, if necessary, calibrating the wheel pressure sensor. 4. The actual quantity and type of services provided will result from the actual needs of the Ordering Party. The Ordering Party reserves the right to increase the number of vulcanization repairs, but their total may not exceed the value specified in the contract. 5. The Ordering Party requires that the service point with technical facilities enabling the entire execution of the subject of the order be located within the administrative boundaries of the city of Miechów. 6. The Ordering Party will require the conclusion of an Agreement, the template of which constitutes Annex No. 2 to the Procedure. 7. The Ordering Party requires completing the Offer Form constituting Annex No. 1. Then, the completed Annex should be uploaded to the Purchasing Platform in the "attachments" tab, Add an Annex. 8. The Ordering Party reserves the right to resign from the subject of the order in the event that the amount allocated for the execution of the order is not fully covered by current police expenses, which will not constitute grounds for any claims on the part of the Contractor. In the Purchasing Platform Form, Enter the Gross Offer Value. Please submit all inquiries via the Purchasing Platform. In case of problems with submitting an offer, please contact the Eb2b Helpdesk - Contact in the footer of the website.

Details: Description Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 1 Lot Communications Equipment 2,200,000.00 6 Unit Base Radio, Ntc-type Approved Equipment, 136-174 Mhz Frequency Range, 50 Watts Maximum Output Power, Programmable To Ntc Assigned Frequency Specifications General A. Frequency Range - Uhf: 400-470mhz*; Vhf:136-174mhz B. Channel Capacity- 48 (16 Channels Per Zone) C. Zone Capacity - 3 D. Channel Spacing - 12.5/25khz E. Operating Voltage - 13.6 V ± 15% F. Current Drain - Standby: Around 0.3a Receive: < 1>1ghz G. Weight - 1100g H. Dimensions - 164 X 43 X150 Mm I. Frequency Stability - ±0.5 Ppm J. Antenna Impedance - 50ω Receiver A. Sensitivity - Analog: 0.3µv (12db Sinad); 0.22µv (typical) (12db Sinad); 0.4µv (20db Sinad) Digital: 0.3µv/bers5% B. Selectivity - Tia-603: 60db @ 12.5khz/ 70db @ 25khz Etsi: 60db @ 12.5khz/ 70db @ 25khz C. Intermodulation - Tia-603: 70db @ 12.5/25khz Etsi: 65db @ 12.5/25khz D. Spurious Response Rejection- Tia-603: 70db @ 12.5/25khz Etsi: 70db @ 12.5/25khz E. Blocking- Tia-603: 90db Etsi: 84db E. Hum And Noise- 40db @ 12.5khz; 45db @ 25khz F. Rated Audio Power Output- Internal (@ 16 Ohm Load): 4w External (@8 Ohm Load): 8w Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 1 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) G. Max Audio Power Output - Internal (@16 Ohm Load): 6w External (@ 8ohm Load): 12w H. Rated Audio Distortion - ≤3% I. Audio Response - +1~-3db J. Conducted Spurious Emission - <-57dbm Transmitter A. Rf Power Output – Low Power Version: 1-25w (uhf/vhf) High Power Version: 5-45w (uhf) / 5-50w (vhf) B. Fm Modulation – 11kof3e @ 12.5khz; 16k0fe @ 25 Khz’ C. 4fsk Digital Modulation – 12.5khz Data Only: 7k60fxd 12.5khz Data & Voice:7k60fxw D. Conducted/radiated Emission - -36dbm<1ghz>1ghz E. Modulation Limiting- ±205khz @ 12.5khz F. Fm Hum & Noise- 40db @ 12.5khz 45db @ 25khz G. Adjacent Channel Power- 60db @ 12.5khz; 70db @ 25khz’ H. Audio Response- +1 ~ -3db I. Audio Distortion- ≤3% J. Digital Vocoder Type- Ambe+2™ Or Selp K. Digital Protocol- Etsi-tsi02 361-1, -2, -3 1 Lot Engineering Plans And Services (professional Fee) 30 Unit Handheld Radio (vhf), Ntc Type Approved Equipment, 136-174mhz Frequency Range, 5 Watts' Maximum Out-put Power, Programmable To Ntc Award Frequency. Accessories: 1. Belt Clip 2. Standard Desk Charger 3. Rubber Duck Antenna 4. Manual General: A. Frequency Range- Uhf: 400-470 Mhz, Vhf:136-174mhz B. Channel Capacity - 128 C. Zone Capacity - 8 D. Zone Channel - 16 E. Channel Spacing - 12.5khz/20kh/25khz F. Operating Voltage -7.4v G. Battery - 1500mah (standard); 2000mah (optional) H. Battery Life - (5/5/90 Duty Cycle, High Tx Power) - Analog: 12h (1500mah), 16h (2000mah) - Digital: 16h (1500mah), 21h (2000mah) I. Frequency Stability - ±0.5ppm J. Antennal Impedance - 50ω K. Weight (with Antenna & Battery) -230g L. Dimensions (h X W X D) - 115 X 55 X 295mm M. Display - 1.77 Inch Tft Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 2 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) Receiver: A. Sensitivity - Digital: 0.18µv / Bers % Analog: 0.18µv(12db Sinad) B. Adjacent Channel Selectivity - Tia -603: 60db@12.5khz, 70db@20/25khz Etsi: 60db@12.5khz, 70db@20/25khz C. Intermodulation- Tia- 603:70db@12.5/20/25khz Etsi: 65db@12.5/20/25khz D.spurious Response Rejection- Tia -603: 70db@ 12.5/20/25khz Etsi: 70db@12.5/20/25khz E. Blocking - Tia -603:80db Etsi: 84db F. Hum And Noise- 40db@20khz, 45db@25khz G. Rated Audio Power Output - 1w H. Rated Audio Distortion - <3>1ghz E. Modulation Limiting - +2.5khz@12.5khz, +4.0khz@20khz, 15.0khz@25khz F. Fm Hum&noise - 40db@12.5khz, 43db@20khz, 45db@25khz G. Adjacent Channel Power- 60db@12.5khz, 70db@20/25khz H. Audio Response- +1 To -3db I. Audio Distorted - ≤% J. Digital Vocoder Type - Ambe +2™ Environmental: A. Operating Temperature - -30°~+60°c B. Storage Temperature - -40°c~+85°c C. Esd - Iec 61000-4.2 (level 4) ±8kv (contact); ±15kv(air) D. Dust And Water Intrusion - Iec60529-ip54 E. Humidity - Mil -std-810g F. Shock And Vibration - Mil-std-810g 1 Lot Installation Of Communication Equipment 1 Unit Mini Duplexer (vhf) -tuned To Working Frequency, 50 Watts 7 Unit Mobile Radio (vhf) - Ntc-approved Type (commercial), 50w, Programmable To Ntc Assigned Frequency Frequency Range 136-174 Mhz, With Magnetic Mount Mobile Antenna 6 Lot Ntc Permit To Purchase/possess And Radio Station License 6 (six) Units Base Radio 30 Lot Ntc Permit To Purchase/possess And Radio Station License For 30 (thirty) Units Handheld Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 3 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 Lot Ntc Permit To Purchase/possess And Radio Station License For 1 (one) Unit Repeater 7 Lot Ntc Permit To Purchase/possess And Radio Station License For 7 (seven) Mobile Radio 1 Lot Programming, Commissioning/propagation And Testing And Delivery (30 Days) Additional Requirements: * Provide A Network Diagram That Is Applicable To The Area * With History/experience In The Installation Of A Working Communication System In The Area *accredited With Ntc-car 1 Unit Repeater (vhf), Ntc-type Approved Equipment, 136-174 Mhz Frequency Range, 50 Watts Maximum Output Power, Programmable To Ntc Assigned Frequency. Specifications: General A. Frequency Range - Uhf 1: 400-470mhz; Uhf 2: 450-520mhz; Uhf 3: 350-400mhz; Vhf: 136-174 Mhz B. Channel Capacity - 16 C. Channel Spacing - 12.5khz/20khz/25 Khz D. Operating Voltage - 13.6v±15% E. Current Drain - Standby: ≤0.8a; Transmit:≤11a F. Frequency Stability - ± O.5ppm G. Antenna Impedance - 50ω H. Duty Cycle - 100% I. Dimensions (h X W X D) - 88 X 483 X 366 Mm J. Weight - 8.5 Kg K. Lcd Display - 220 X 176 Pixels, 262000 Colors; 2.0 Inch, 4 Rows Receiver A. Sensitivity - Analog: 0.28µv (12 Db Sinad); 0.22µv (typical) 12db Sinad) 0.4 Μv (20db Sinad) Digital: 0.3µv/ber5% B. Adjacent Channel Selectivity- Tia-603: 65db @ 12.5 Khz; 75 Db @20/25khz Etsi: 65 Db @ 12.5 Khz; 75 Db @ 20/25khz C. Intermodulation- Tia -603: 75db @ 12.5/20/25khz Etsi: 70db @ 12.5/20/25khz D. Spurious Response Rejection Tia-603: 80db @ 12.5/20/25khz Etsi: 80db @ 12.5/20/25khz E. Hum And Noise - 40db@ 12.5khz; 43db@20khz; 45db@25khz F. Rated Audio Power Output - 0.5w G. Rated Audio Distortion- ≤3% H. Audio Response - +1 ~ -3db I. Conducted Spurious Emission - <-57dbm Transmitter Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 4 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) A. Rf Power Output - 5-50w B. Fm Modulation - 11k0f3e @ 12.5khz; 14k0f3e @ 20khz; 16k0f3e @ 25 Khz C. 45sk Digital Modulation - 12.5khz Data Only: 7k60fxd; 12.5khz Data And Voice:7k60fxw D. Conducted/radiated Emission - -36dbm ≤ 1ghz; -30dbm > 1ghz E. Modulation Limiting - ±2.5khz @ 12.5 Khz; ±4.0khz @ 20khz; ±5.0khz @ 25khz F. Fm Hum & Noise - 40db @ 12.5khz; 43db @ 20khz; 45db @ 25khz G. Adjacent Channel Power - 60db @ 12.5khz; 70db @ 20/25khz H. Audio Response - +1 ~ -3db I. Audio Distortion - ≤3% J. Digital Vocoder Type - Ambe +2™, Selp, Nvoc, Comm K. Digital Protocol - Etsi-ts102 361-1, -2-, -3 Environmental Specifications A. Operating Temperature - -30°c ~+60°c B. Storage Temperature - -40°c ~ +85°c Accessories: 1. 1 Unit Tx Antenna (2 Elements Of Variloop Antenna) Cut, Fold And Tuned To Ntc Tx Assigned Frequency 2. 1 Unit Rx Antenna (2 Elements Of Variloop Antenna) Cut, Fold And Tuned To Ntc Tx Frequency 3. 100 M Coax Cable Rg-8 (japan) 4. 4 Pcs. Pi-259 Connector (good Quality) 5. Regulated Power Supply (13.8 V Dc/30 Amp) 6. With Pt Mask Antenna And Repeater Cabinet This Is A Lot Bidding, Partial Bids Are Not Allowed Please Indicate Brands Of Offers And Attach Technical Brochures In The Eligibility And Technical Proposal Please Indicate Unit Prices Of Offers In The Financial Proposal Bidders Must Possess Valid Mayor's/business Permit With A Relevant Line Of Business In The Supply, Delivery And Installation Of Communications Equipment For Use Of Bfp Under Pr No. 2 Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 5 Of 5

Details: The subject of the construction work is the modernization of the existing building of the fire station. The modernization includes the insulation of the entire building, the raising of the roof structure and minor modifications to the internal layout. The building will be used in the existing way, namely as a fire station. The building has a floor plan in the shape of LO with a total area of 519.0 m2 with a hipped roof over the garage part and a gable roof over the administrative part. The building is located on flat terrain. The armory has two floors above ground. This is the administrative part, two-story, where the corridors with a staircase, the warning technology room, SDH warehouses, a gym, a workshop, SDH locker rooms, social facilities and a washroom are located in the I.np. In Ii.np There Is A Corridor, A Commander's Office, A Kitchenette And A Vocational Training Classroom. In The Second One-Story Part Of The Object, There Are Two Built-In Garages For Three And One Parking Spaces For Vehicles Of Group 2 SDH. For Liquid Fuels And A Storage Room For Garden Tools. Garages For SDH Cars Must Correspond With Their Dimensions And Entrance Gates To Čsn 73 5710 According To The Type Of SDH Vehicle. Furthermore, The Entrance Gates To Existing Garages Will Be Replaced, The Internal Installations In The Object Will Be Repaired, The Internal Walls And Plaster Will Be Repaired. The construction is divided into the following construction objects: So-01 – Fire Station So-02 – Gas Pipeline Connection The Client assumes, for operational reasons, the construction will be divided into 2 stages, namely: Stage 1 – Garage Spaces with Facilities Necessary for the Unit's Operational Capability Stage 2 – Main Building However, the construction procedure in relation to maintaining the unit's operational capability and the operation of the fire station building will be discussed and defined in detail with the winning bidder before the start of construction. The Client draws attention to the fact that the construction will be carried out during operation, while complying with the conditions set out below by the user – the Volunteer Fire Department Unit (hereinafter referred to as "JSDH"): The JSDH's operational capability must be maintained (response); For the purposes of preparing the construction site, it is possible to be without electricity and water for a maximum of 2 – 3 days. The selected supplier must contact the Jsdh commander by phone at least 2 days in advance (so that it is possible to arrange services for the preparation of equipment). The object must have: - lighting and electricity connections, - a construction switchboard with a 2x380v socket connection and at least 4x220v, - an air connection for equipment from the garage area must be ensured - for a transitional period and under suitable climatic conditions, it is assumed that emergency vehicles will be parked in a neighboring public area, the construction site equipment must allow for the parking and exit of these vehicles. - in the event of negative outdoor air temperatures, the parking of emergency vehicles in garages must be allowed. The subject of the public contract is described in detail in: - the construction project documentation (constitutes Annex No. 7 to this call); - List of Construction Works, Supplies and Services with Addressed Statement of Measurements (constitutes Annex No. 8 to this Call);

Details: The Order Includes The Provision Of On-demand Traffic “emil Taunusstein” In Area Operations, Hereinafter Referred To As “odv”. In Terms Of Approval, This Corresponds To Regular Scheduled Traffic In Accordance With Section 44 Pbefg. This Involves A Demand-oriented, Timetable-independent Transport Of People By The Operator Using Passenger Cars Ordered In Advance By The Passengers And Without A Fixed Route Between Certain Entry And Exit Points In The Operating Area Determined By The Client. Operation Of All Virtual Stopping Points In The Control Area: Https://www.google.com/maps/d/0/viewer?mid=1lfx6h_jur7lubull1dfs4ayhsolmkps&femb=1&ll=50.1583023410848%2c8.1966926373&z=13 The Order Includes. . Driving Staff, Disposition And Depot, The Procurement And Maintenance Of The Vehicles, As Well As The Provision Of The Necessary Software. Passengers' Travel Requests Are To Be Served As Promptly And Efficiently As Possible. The Waiting Times Should Be As Short As Possible. Travel Requests Are Booked Via The App (see On-demand Software). In Addition, The Operator Also Accepts Travel Requests By Telephone During Operating Hours. The Requirements For The On-demand Software Can Be Seen In The Appendix “http://ausscription.igdb.de/rtv/20240105_funktionalitaeten_odv_software.pdf”. The Odv Is Operated At The Following Times: Monday To Thursday: 5:30 A.m. - 10:30 P.m. Friday: 5:30 A.m. - 12:30 A.m. Saturday: 7:30 A.m. - 12:30 A.m. Sunday And Public Holidays: 8:30 A.m. - 22 :30 P.m. During Operating Hours, One To Two Vehicles Are In Use At The Same Time. From The Distribution Of The Service Time In The System “http://ausschreib.igdb.de/rtv/20240103_mindestsoll_betriebsstunden_odv_2025.pdf” There Is An Expected Total Of 9,058 Operating Hours In A Standard Year (250 Days Monday To Friday, 52 Saturdays And 63 Sundays And Public Holidays). , Of Which 4,875 Are In Daytime Traffic And 4,183 Are In Late-night And Weekend Traffic. Requirements For The Vehicles: The Vehicle Fleet Consists Of At Least Three Battery-electric Minibuses Or Minivans With A Maximum Of Nine Seats (including Driver's Seat) Per Vehicle. In Each Vehicle There Are At Least Five And Up To Seven Passenger Seats In The Passenger Compartment. The Front Rows Of Seats In The Passenger Compartment Have A Maximum Of Two Seats And Only The Last Row Of Seats Has Up To Three Seats, So That It Is Possible To Climb Through To The Rear Without Folding Down The Seats. Passenger Seats Are Not Counted Or Used As Passenger Seats. At Least Two Of The Vehicles Have A Barrier-free Parking Space For Wheelchairs With Devices To Properly Secure Passengers. If The Wheelchair Space Is Used, The Number Of Additional Passenger Seats In The Vehicle May Be Temporarily Reduced To Three. All Vehicles Have A Step On The Side Door To Make It Easier For Passengers To Get In. The Common Conditions Of Carriage Of The Rhein-main-verkehrsverbund (gb-rmv) Apply On-demand Transport In The Rhine-main Transport Association Https://www.rmv.de/c/de/fahrkarten/infos-regelen/on-demand-verkehre-befoerderung-und-tarif.

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman

Details: Description Invitation To Bid For The Supply And Delivery Of Various Common-used Office Supplies 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2025 Intends To Apply The Sum Of Six Million Two Hundred Ninety-four Thousand One Hundred Twenty-two Pesos And Fifty Centavos (php6,294,122.50) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Supply And Delivery Of Various Common-used Office Supplies With Project Identification Number Da-rfo 1-2025-goods-033. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Item No. Specifications Qty. Unit Unit Cost Total Cost 1 Automatic Voltage Regulator (avr), 3000w 4 Unit 5,500.00 22,000.00 2 Battery Charger For Aa & Aaa, With Aa Rechargeable Battery 54 Pc 1,700.00 91,800.00 3 Battery, Aa, Alkaline, 4pcs/pack 132 Pack 90.00 11,880.00 4 Battery, Aa, Rechargeable 2pcs/pack (2450 Mah) 63 Pack 700.00 44,100.00 5 Battery, Aaa, Alkaline 4pcs/pack 141 Pack 120.00 16,920.00 6 Battery, Aaa, Rechargeable 2pcs/pack (800 Mah) 9 Pack 500.00 4,500.00 7 Cfl Bulb 18 Watts 59 Pc 200.00 11,800.00 8 Extension Outlet 4 Gang W/ Switch (1.5m) 18 Unit 950.00 17,100.00 9 Flashlight, Rechargeable 5 Pc 400.00 2,000.00 10 Laser Pointer Presenter 7 Pc 800.00 5,600.00 11 Led, Lightbulb (daylight 9 Watt) 70 Pc 200.00 14,000.00 12 Tape, Electrical, 19mm X 16mm 32 Pc 60.00 1,920.00 13 Universal Extension Wheel (10m) 12 Unit 2,200.00 26,400.00 14 Universal Outlet Extension Cord, 6 Gang W/ Switch, 2-3 Meters Cord Length 17 Unit 1,200.00 20,400.00 15 Alcohol (500ml, Isoprophyl 70%) 343 Bot 110.00 37,730.00 16 Alcohol (gal, Isoprophyl 70%) 46 Gal 600.00 27,600.00 17 Ballpen, 0.5mm, Fine Black 4193 Pc 10.00 41,930.00 18 Ballpen, 0.5mm, Fine Blue 2616 Pc 10.00 26,160.00 19 Ballpen, 0.5mm, Fine Red 139 Pc 10.00 1,390.00 20 Ballpen, 0.7mm, Fine, Black 1188 Pc 12.00 14,256.00 21 Ballpen, 0.7mm, Fine, Blue 1142 Pc 12.00 13,704.00 22 Ballpen, 0.7mm, Fine, Red 50 Pc 12.00 600.00 23 Ballpen, Bp-s Fine, Black 679 Pc 25.00 16,975.00 24 Ballpen, Bp-s Fine, Blue 406 Pc 25.00 10,150.00 25 Ballpen, Bp-s Fine, Red 174 Pc 25.00 4,350.00 26 Bank Envelope (11 X 7 Inch) 75 Pc 3.50 262.50 27 Bond Paper, (11"x17") Tabloid Size, Subs 24 / 80 Gsm 20 Ream 550.00 11,000.00 28 Bond Paper, (8.5x11) Letter, Subs 20 / 70 Gsm 78 Ream 280.00 21,840.00 29 Bond Paper, (8.5x11) Letter, Subs 24 / 80 Gsm 49 Ream 320.00 15,680.00 30 Bond Paper, (8.5x13) Legal, Subs 20 / 70 Gsm 686 Ream 300.00 205,800.00 31 Bond Paper, (8.5x13) Legal, Subs 24 / 80 Gsm 490 Ream 350.00 171,500.00 32 Bond Paper, A3, Subs. 20 / 70 Gsm 50 Ream 465.00 23,250.00 33 Bond Paper, A3, Subs. 24 / 80 Gsm 20 Ream 530.00 10,600.00 34 Bond Paper, A4, Subs 20 / 70 Gsm 904 Ream 290.00 262,160.00 35 Bond Paper, A4, Subs 24 / 80 Gsm 558 Ream 330.00 184,140.00 36 Book Ends, Metal 5 Pair 200.00 1,000.00 37 Carbon Paper, Long 2 Pack 195.00 390.00 38 Cartolina, White, 20pcs/pack 15 Pack 90.00 1,350.00 39 Certificate Holder, A4 Size W/ Plastic Cover 623 Pc 50.00 31,150.00 40 Clear Folder, Morocco Long, Blue 30 Book 22.00 660.00 41 Clear Folder, Morocco Short, Blue 10 Book 20.00 200.00 42 Clearbook Refil, 20 Holes, 10pcs/pack 10 Pack 50.00 500.00 43 Clip Board, Data Board. 8.5"x11" 22 Pc 90.00 1,980.00 44 Clip Board, Data Board. 8.5"x13" 148 Pc 100.00 14,800.00 45 Clip, Bulldog 2" 344 Pc 8.00 2,752.00 46 Clip, Bulldog 3'' 324 Pc 15.00 4,860.00 47 Colored Paper 8 1/2 X 11" 10's/pack 22 Pack 30.00 660.00 48 Colored Paper, A4, Light Blue 37 Ream 200.00 7,400.00 49 Columnar Notebook, 10 Cols 10 Pad 35.00 350.00 50 Columnar Notebook, 12 Cols 18 Pad 35.00 630.00 51 Construction Paper (assorted) 10 Sheets Per Pack 40 Pack 30.00 1,200.00 52 Corkboard, 2x3 Ft 2 Pc 900.00 1,800.00 53 Corkboard, 3ft X 4 Ft 1 Pc 2,000.00 2,000.00 54 Correction Pen 70 Pc 20.00 1,400.00 55 Correction Tape 5mm X 8m 562 Pc 30.00 16,860.00 56 Cotton (500 Grams) 1 Roll 150.00 150.00 57 Crayons, 8 Colors 12 Pack 20.00 240.00 58 Cutter Blade, Big 12 Box 30.00 360.00 59 Cutter, Heavy Duty 46 Pc 100.00 4,600.00 60 Dating And Stamping Machine, Self Inking (dated 2024 And Up) 42 Pc 500.00 21,000.00 61 Envelope, Ordinary, Long Brown 1525 Pc 4.00 6,100.00 62 Envelope, Ordinary, Short Brown 243 Pc 3.00 729.00 63 Eraser (for Pencil) 161 Pc 15.00 2,415.00 64 Expanding Envelope, Kraft, Legal Size 335 Pc 15.00 5,025.00 65 Expanding Envelope, Hard Plastic With Garter (pvc Type), Legal Size 76 Pc 90.00 6,840.00 66 Expanding Envelope, Plastic Long (thick) 230 Pc 35.00 8,050.00 67 Expanding Envelope, Plastic Long With Handle 355 Pc 90.00 31,950.00 68 File Box W/ Cover (blue) 233 Pc 410.00 95,530.00 69 File Box W/ Cover (red) 136 Pc 410.00 55,760.00 70 File Rack, 3 Layers, Heavy Duty 24 Pc 500.00 12,000.00 71 Film Index (with Sign Here Note) 219 Pack 55.00 12,045.00 72 Film Index Rainbow Color 158 Pack 45.00 7,110.00 73 Folder Expanding, Legal Size (green, Glossy) 1574 Pc 18.00 28,332.00 74 Folder Expanding, Short (green, Glossy) 50 Pc 15.00 750.00 75 Folder Long Ordinary, Kraft, Thick 1196 Pc 6.00 7,176.00 76 Folder Long Ordinary, White, Thick 3869 Pc 6.00 23,214.00 77 Folder Plastic Clear W/ Slide (a4) (thick Plastic) 66 Pc 35.00 2,310.00 78 Folder Plastic Clear W/ Slide (legal) (thick Plastic) 178 Pc 40.00 7,120.00 79 Folder, Morocco, Legal (blue) Not Glossy 140 Pc 25.00 3,500.00 80 Folder, Morocco, Legal (green) Not Glossy 92 Pc 25.00 2,300.00 81 Folder, Morocco, Short (blue) Not Glossy 107 Pc 18.00 1,926.00 82 Folder, Morocco, Short (green) Not Glossy 35 Pc 18.00 630.00 83 Glue Gun Heavy Duty Big 8 Pc 360.00 2,880.00 84 Glue Stick, Big 102 Pc 12.00 1,224.00 85 Glue, Multi-purpose 240 Grams 12 Bot 150.00 1,800.00 86 Highlighter, Blue 55 Pc 40.00 2,200.00 87 Highlighter, Green 95 Pc 40.00 3,800.00 88 Highlighter, Orange 83 Pc 40.00 3,320.00 89 Highlighter, Pink 78 Pc 40.00 3,120.00 90 Highlighter, Yellow 91 Pc 40.00 3,640.00 91 I.d. Holder W/ Lace 4"x6" 100 Pc 45.00 4,500.00 92 Illustration Board, 1 Whole 15 Pc 70.00 1,050.00 93 Index Card (3"x5") 50s/pack 24 Pack 45.00 1,080.00 94 Laminating Film A4 Size 100pcs/pack 250 Mic 34 Pack 1,200.00 40,800.00 95 Lead, For Mechanical Pencil 0.5mm 12pc/tube 2 Tube 30.00 60.00 96 Lever Arch File, Blue, File Top, Size: Approx. (11 X 13.5 X 2.5 Inches) 20 Pc 195.00 3,900.00 97 Lever Arch File, Blue, Landscape, Size: Approx. (11 X 13.5 X 2.5 Inches) 40 Pc 195.00 7,800.00 98 Lever Arch File, Blue, Size: Approx. (15.5 X 9.5 X 3 Inches) 45 Pc 195.00 8,775.00 99 Magazine File Box (5"x9"x15-3/4") 60 Pc 110.00 6,600.00 100 Mailing Envelope, White, 500pcs/box 18 B0x 290.00 5,220.00 101 Manila Paper 1 Whole 276 Sheet 5.00 1,380.00 102 Marker Permanent Ink Refill 30ml, Black (pilot) 36 Bot 110.00 3,960.00 103 Marker Permanent Ink Refill 30ml, Blue (pilot) 32 Bot 110.00 3,520.00 104 Notebook (80 Leaves) 1040 Pc 45.00 46,800.00 105 Official Record Book (300 Pages) Aprox. Size: (8.5 X 11) 73 Book 250.00 18,250.00 106 Official Record Book (500 Pages) Aprox. Size: (8.5 X 11) 100 Book 280.00 28,000.00 107 Paper Cutter With Board, Wood Base, 12x15 3 Unit 1,200.00 3,600.00 108 Paper Cutter,steel Base W/ Ruler & Presser 15'x12' 1 Unit 2,000.00 2,000.00 109 Paper Fastener (plastic) 100 Box 40.00 4,000.00 110 Paper Fastener, (metal) 207 Box 70.00 14,490.00 111 Paper, Ruled Pad, 90 Leaves (yellow Pad) 35 Pad 45.00 1,575.00 112 Parchment Paper, Long, 10sheets/pack (cream) 48 Pack 35.00 1,680.00 113 Parchment Paper, Short, 10sheets/pack (cream) 58 Pack 30.00 1,740.00 114 Paste With Applicator, 200 Grams 4 Jar 80.00 320.00 115 Pencil With Eraser No.2 (12pcs/box) 212 Box 72.00 15,264.00 116 Pencil, Mechanical, 0.5mm Lead 56 Pc 47.75 2,674.00 117 Permanent Marker (black) (bullet Type) (super Color Marker) 225 Pc 45.00 10,125.00 118 Permanent Marker (black) (chisel Type) (super Color Marker) 174 Pc 55.00 9,570.00 119 Permanent Marker (blue) (bullet Type) (super Color Marker) 195 Pc 45.00 8,775.00 120 Permanent Marker (blue) (chisel Type) (super Color Marker) 117 Pc 55.00 6,435.00 121 Permanent Marker (red) (bullet Type) (super Color Marker) 57 Pc 45.00 2,565.00 122 Permanent Marker (red) (chisel Type) (super Color Marker) 70 Pc 55.00 3,850.00 123 Philippine National Flag, Size: 90cm X 150cm 12 Pc 102.00 1,224.00 124 Photo Paper, Glossy, A4, 20pcs/pack 67 Pack 150.00 10,050.00 125 Plastic Twine, One Kilo Per Roll 18 Roll 80.00 1,440.00 126 Puncher, Heavy Duty, 2 Holes 12 Unit 200.00 2,400.00 127 Push Pin, Hammer Head Type, Assorted Colors, 100s/box 13 Box 50.00 650.00 128 Ring Binder, 1" 5 Pc 45.00 225.00 129 Ring Binder, 1/2 " 5 Pc 20.00 100.00 130 Rotary Pencil Sharpener 2 Pc 300.00 600.00 131 Rubber Band, Large Size 15 Box 150.00 2,250.00 132 Ruler Metal 12 Inch 9 Pc 50.00 450.00 133 Ruler Plastic 12 Inch 5 Pc 20.00 100.00 134 Scissors Heavy Duty Big 8" (stainless) 63 Pair 120.00 7,560.00 135 Screw Fastener 3" 438 Pc 10.00 4,380.00 136 Screw Fastener 4" 357 Pc 12.00 4,284.00 137 Sign Pen V5, Black 415 Pc 55.00 22,825.00 138 Sign Pen V5, Blue 387 Pc 55.00 21,285.00 139 Sign Pen V5, Green 55 Pc 55.00 3,025.00 140 Sign Pen, 1.0mm, Black 177 Pc 75.00 13,275.00 141 Sign Pen, 1.0mm, Blue 146 Pc 75.00 10,950.00 142 Sign Pen, Black Pentel Gel Type 0.5 539 Pc 95.00 51,205.00 143 Sign Pen, Blue Pentel Gel Type 0.5 400 Pc 95.00 38,000.00 144 Specialty Board, Cream, 8.5x11, 10pcs/pack (b-board) 673 Pack 35.00 23,555.00 145 Specialty Board, Cream, 8.5x13, 10pcs/pack (b-board) 648 Pack 40.00 25,920.00 146 Specialty Board, White, 8.5x11, 10pcs/pack (b-board) 225 Pack 35.00 7,875.00 147 Specialty Board, White, 8.5x13, 10pcs/pack (b-board) 408 Pack 40.00 16,320.00 148 Stamp Pad Ink Black 50ml 13 Pc 45.00 585.00 149 Stamp Pad Ink Red 50ml 4 Pc 45.00 180.00 150 Stamp Pad Ink Violet 50ml 23 Pc 45.00 1,035.00 151 Stamp Pad Standard Size Black 7 Pc 40.00 280.00 152 Stamp Pad Standard Size Violet 4 Pc 40.00 160.00 153 Staple Wire #35 297 Box 40.00 11,880.00 154 Stapler, #35 Heavy Duty With Staple Remover 57 Unit 400.00 22,800.00 155 Stapler, Long Reach Heavy Duty 3 Unit 500.00 1,500.00 156 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack) A4size 75 Pack 95.00 7,125.00 157 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack), Long 123 Pack 100.00 12,300.00 158 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack), Short 55 Pack 90.00 4,950.00 159 Sticky Notes (2"x1.5") 100 Sheets/pad 126 Pad 25.00 3,150.00 160 Sticky Notes (2"x2"), 100 Sheets/pad 141 Pad 30.00 4,230.00 161 Sticky Notes (3"x2"), 100 Sheets/pad 127 Pad 40.00 5,080.00 162 Sticky Notes (3"x3"), 100 Sheets/pad 222 Pad 40.00 8,880.00 163 Sticky Notes (3"x4), 100 Sheets/pad 158 Pad 50.00 7,900.00 164 Sticky Notes (3"x5"), 100 Sheets/pad 215 Pad 50.00 10,750.00 165 Super Glue / Shoe Glue 3 Grams 6 Pc 50.00 300.00 166 Super Permanent Marker, Fine Black (industrial) (sharpie) 35 Pc 90.00 3,150.00 167 Tape Dispenser, Heavy Duty (1") 9 Pc 150.00 1,350.00 168 Tape Double Sided Thin 24mm White 95 Pc 40.00 3,800.00 169 Tape Double Sided Adhesive W/ Foam Green, 2" 94 Roll 230.00 21,620.00 170 Tape Double Sided Adhesive W/ Foam Green, 1" 84 Roll 150.00 12,600.00 171 Tape Duct, Color Blue 2" 62 Roll 110.00 6,820.00 172 Tape Duct, Color Grey 2" 78 Roll 110.00 8,580.00 173 Tape, Masking, 1/2" 47 Roll 21.00 987.00 174 Tape, Masking, 24mm, 1", 100m 95 Roll 35.00 3,325.00 175 Tape, Masking, 48mm, 2", 100m 301 Roll 70.00 21,070.00 176 Tape, Packaging, 48mm, 2", 100m 88 Roll 55.00 4,840.00 177 Tape, Transparent, 24mm, 1", 100m 170 Roll 30.00 5,100.00 178 Tape, Transparent, 48mm, 2", 100m 126 Roll 52.00 6,552.00 179 Tracing Paper, Per Cut, 20x30, 8085 Thick 2 Pc 20.00 40.00 180 Whiteboard, 3ft X 4ft 7 Pc 2,000.00 14,000.00 181 Whiteboard, 5ft X 3ft 6 Pc 2,800.00 16,800.00 182 Air Freshener, 280ml (lemon Fresh) 163 Can 240.00 39,120.00 183 Air Freshener, Scented Gel, 180 Grams 98 Pc 220.00 21,560.00 184 Bathroom Cleaner (approx. 900ml) 29 Bot 300.00 8,700.00 185 Bathroom Soap, 90 Grams 16 Pc 50.00 800.00 186 Bleach Colored 1 Ltr 62 Bot 130.00 8,060.00 187 Bleach White 1 Ltr 63 Bot 100.00 6,300.00 188 Broom, Ceiling, Bamboo 23 Pc 170.00 3,910.00 189 Broom, Soft 5 Pc 170.00 850.00 190 Broom, Stick 14 Pc 40.00 560.00 191 Car Freshener 42 Grams, Organic Canister, Assorted Scent 63 Can 240.00 15,120.00 192 Detergent Bar, Long 12 Bar 80.00 960.00 193 Detergent Powder, W/ Fabric Conditioner 1kg 43 Pack 150.00 6,450.00 194 Dishwashing Liquid (250ml) 402 Bot 70.00 28,140.00 195 Disinfectant Spray, 170g 89 Can 280.00 24,920.00 196 Door Mat, Cloth Rectangle 105 Pc 60.00 6,300.00 197 Dust Pan, Plastic Big 2 Pc 80.00 160.00 198 Fabric Conditioner 800 Ml 14 Bot 250.00 3,500.00 199 Face Towel (cotton), Good Morning 159 Pc 30.00 4,770.00 200 Floor Mop With Bucket (360degrees Rotating Micro Fiber Head) 3 Set 1,500.00 4,500.00 201 Furniture Cleaner, 300ml 32 Can 300.00 9,600.00 202 Garbage Bag, Black, Gusseted Type Thick Plastic, 10's/roll, (small) 55 Roll 70.00 3,850.00 203 Garbage Bag, Black, Thick Plastic, 10's/pack, (large), Heavy Duty 145 Pack 100.00 14,500.00 204 Garbage Bag, Black, Thick Plastic, 10's/pack, (xl) Heavy Duty 37 Pack 130.00 4,810.00 205 Garbage Bag, Black, Thick Plastic, 10's/pack, (xxl) Heavy Duty 239 Pack 150.00 35,850.00 206 Garbage Bag, Black, Thick Platic, 10's/pack, (medium), Heavy Duty 168 Pack 80.00 13,440.00 207 Glass Cleaner, Big Sprayer Type 7 Bot 197.00 1,379.00 208 Glass Squeezer W/ Handle 1 Pc 125.00 125.00 209 Hand Sanitizing Gel, 60ml 15 Bot 60.00 900.00 210 Insecticide Spray (aerosol) 400ml 73 Can 350.00 25,550.00 211 Laundry Brush 4 Pc 30.00 120.00 212 Laundry Gloves (medium) 1 Pc 200.00 200.00 213 Liquid Handwash (antibacterial) 400ml 123 Bot 140.00 17,220.00 214 Microfiber, Cleaning Cloth 35cm X 35cm 47 Pc 60.00 2,820.00 215 Mop W/ Squeezer (squeez Mop) 26 Pc 350.00 9,100.00 216 Pail W/ Cover (16l) 18 Pc 200.00 3,600.00 217 Paper Towel, Interfold 144 Pack 120.00 17,280.00 218 Push Brush (floor Brush) 20 Pc 130.00 2,600.00 219 Scrub Sponge, Heavy Duty 116 Pc 60.00 6,960.00 220 Scrubbing Pads, Heavy Duty 25 Pc 40.00 1,000.00 221 Table Napkin, Pre Folded 13 Pack 100.00 1,300.00 222 Tissue Paper, 2-ply, 12 Rolls/pack 422 Pack 180.00 75,960.00 223 Tissue Paper, 3-ply, @ 4rolls/pack 213 Pack 160.00 34,080.00 224 Toilet Bowl Brush W/ Box 57 Pc 92.00 5,244.00 225 Toilet Bowl Pump 2 Pc 60.00 120.00 226 Toilet Deodorant Cake, 50 Grams 108 Pc 50.00 5,400.00 227 Trash Bin, Plastic W/ Cover, 11l Capacity 6 Pc 150.00 900.00 228 Trash Bin, Plastic W/ Cover, 25l Capacity 1 Pc 250.00 250.00 229 White Facial Tissue (200mmx200mm)2ply 210 Box 110.00 23,100.00 230 Cd Rewritable, 700mb 80min. W/ Case 603 Pc 50.00 30,150.00 231 Dvd-rewritable W/ Case 6 Pc 90.00 540.00 232 External Hard Drive (1 Tb) Usb 3.0 27 Unit 4,700.00 126,900.00 233 External Hard Drive, Ssd (1 Tb) Usb 3.0/type C 15 Unit 6,000.00 90,000.00 234 Flash Drive , Usb 16gb, Plug In Play 3 Pc 490.00 1,470.00 235 Flash Drive, 32gb Ultra Usb Driver (otg); Micro-usb & Usb Connectors 42 Pc 1,300.00 54,600.00 236 Flash Drive, Usb 32 Gb 31 Pc 1,000.00 31,000.00 237 Flash Drive, Usb 64 Gb 119 Pc 1,500.00 178,500.00 238 Hdmi Cable, 10m 5 Pc 600.00 3,000.00 239 Hdmi Cable, 5m 3 Pc 300.00 900.00 240 Keyboard, Usb Type 36 Pc 450.00 16,200.00 241 Keyboard, Wireless 5 Pc 600.00 3,000.00 242 Microsd Memory Card, 32gb 1 Pc 1,000.00 1,000.00 243 Microsd Memory Card, 64gb 2 Pc 1,800.00 3,600.00 244 Mouse Optical, (usb) 15 Pc 300.00 4,500.00 245 Mouse For Laptop, Optical 50 Pc 440.00 22,000.00 246 Mouse Optical, Wireless 21 Pc 630.00 13,230.00 247 Mouse Pad 119 Pc 30.00 3,570.00 248 Powerbank 10000mah 5 Pc 1,500.00 7,500.00 249 Powerbank 20000mah 50 Pc 2,500.00 125,000.00 250 Uninterruptible Power Supply (ups), 500va - 600va 12 Pc 4,500.00 54,000.00 251 Usb Hub, 3.0, 4 Port 5 Pc 500.00 2,500.00 252 Usb Lan Wireless Adapter 8 Unit 1,000.00 8,000.00 253 Wireless Usb Presenter 2 Unit 2,200.00 4,400.00 254 Ink Brother, Bt5000m, Magenta 36 Bottle 490.00 17,640.00 255 Ink Brother, Bt5000m, Yellow 36 Bottle 490.00 17,640.00 256 Ink Brother, Bt5000m, Cyan 41 Bottle 490.00 20,090.00 257 Ink Brother, Bt6000m, Black 30 Bottle 490.00 14,700.00 258 Ink Cartridge, Canon Cl-36, Colored (for Canon Mobile Printer) 13 Cart 1,600.00 20,800.00 259 Ink Cartridge, Canon Cl-811 Colored 3 Cart 2,000.00 6,000.00 260 Ink Cartridge, Canon Pg-35, Black (for Canon Mobile Printer) 10 Cart 1,100.00 11,000.00 261 Ink Cartridge, Canon Pg-810 (canon) 3 Cart 1,900.00 5,700.00 262 Ink Cartridge, Hp62, Black (hp Office Jet 200 Mobile Printer) 5 Cart 1,500.00 7,500.00 263 Ink Cartridge, Hp62, Tricolor (hp Office Jet 200 Mobile Printer) 5 Cart 1,800.00 9,000.00 264 Ink, Hp Gt 51 Black 2 Bottle 400.00 800.00 265 Ink, Hp Gt 52 Cyan 2 Bottle 400.00 800.00 266 Ink, Hp Gt 52 Magenta 2 Bottle 400.00 800.00 267 Ink, Hp Gt 52 Yellow 2 Bottle 400.00 800.00 268 Ink Epson T6731 Black (epson) 6 Bottle 800.00 4,800.00 269 Ink Epson T6732 Cyan (epson) 6 Bottle 800.00 4,800.00 270 Ink Epson T6733 Magenta (epson) 6 Bottle 800.00 4,800.00 271 Ink Epson T6734 Yellow (epson) 6 Bottle 800.00 4,800.00 272 Ink Epson T6735, Light Cyan (epson) 3 Bottle 800.00 2,400.00 273 Ink Epson T6736, Light Magenta (epson) 3 Bottle 800.00 2,400.00 274 Ink Epson, T6641, Black 70ml 22 Bottle 450.00 9,900.00 275 Ink Epson, T6642, Cyan 70ml 9 Bottle 450.00 4,050.00 276 Ink Epson, T6643, Magenta 70ml 13 Bottle 450.00 5,850.00 277 Ink Epson, T6644, Yellow 70ml 14 Bottle 450.00 6,300.00 278 Ink Epson, 001, Black 179 Bottle 700.00 125,300.00 279 Ink Epson, 001, Cyan 138 Bottle 600.00 82,800.00 280 Ink Epson, 001, Magenta 138 Bottle 600.00 82,800.00 281 Ink Epson, 001, Yellow 137 Bottle 600.00 82,200.00 282 Ink Epson, 003, Black 679 Bottle 500.00 339,500.00 283 Ink Epson, 003, Cyan 465 Bottle 500.00 232500 284 Ink Epson, 003, Magenta 483 Bottle 500.00 241,500.00 285 Ink Epson, 003, Yellow 451 Bottle 500.00 225500 286 Ink Epson, 008, Black 37 Bottle 1,200.00 44,400.00 287 Ink Epson, 008, Cyan 28 Bottle 900.00 25,200.00 288 Ink Epson, 008, Magenta 29 Bottle 900.00 26,100.00 289 Ink Epson, 008, Yellow 29 Bottle 900.00 26,100.00 290 Toner Cartridge, Fuji Xerox S1810/s2010/s2220/s2420 (ct201911) 3 Cart 5,400.00 16,200.00 291 Toner Cartridge, Fuji Xerox S2011/s2320/s2520 (ct202384) 1 Cart 5,400.00 5,400.00 292 Toner Cartridge, Hp Laserjet P1102, Ce285a (85a) 25 Cart 5,000.00 125,000.00 293 Toner Cartridge, Kyocera (tk 1175) Monochrome 4 Cart 9,500.00 38,000.00 294 Toner Cartridge, Sharp Ar-6026n (mx-238ft) 5 Cart 9,500.00 47,500.00 295 Toner Cartridge, Lexmark (mx321) 2 Cart 10,000.00 20,000.00 296 Hp Color Laserjet Toner 206a, Black 7 Cart 9,500.00 66,500.00 297 Hp Color Laserjet Toner 206a, Cyan 1 Cart 9,500.00 9,500.00 298 Hp Color Laserjet Toner 206a, Magenta 1 Cart 9,500.00 9,500.00 299 Hp Color Laserjet Toner 206a, Yellow 1 Cart 9,500.00 9,500.00 300 Ink Brother Btd60bk 8 Bottle 510.00 4,080.00 301 Certificate Holder, Legal Size W/ Plastic Cover 400 Pc 60.00 24,000.00 302 Specialty Board, Cream, A4 8.2x11.7, 10pcs/pack (b-board) 300 Pack 30.00 9,000.00 303 Specialty Board, White, A4 8.2x11.7, 10pcs/pack (b-board) 105 Pack 30.00 3,150.00 304 Ink Cartridge, Hp 682, Black 3 Cart 550.00 1,650.00 305 Ink Cartridge, Hp 682, Tri-color 3 Cart 550.00 1,650.00 306 Index Card (5"x8") 50s/pack 3 Pack 65.00 195.00 307 Screw Fastener 1" 200 Pc 7.00 1,400.00 308 Screw Fastener 2" 198 Pc 8.00 1,584.00 309 Plastic Fastener (5 Pcs/pack) Double Lock 220 Pack 25.00 5,500.00 310 Notebook, A6 Size, 200 Pages 115 Pc 60.00 6,900.00 311 Notebook, A7 Size, 200 Pages 100 Pc 50.00 5,000.00 312 Usb 3.1 Otg Flashdrive, Type C, 128 Gb 51 Pc 3,000.00 153,000.00 313 Notebook, A5 Size, Soft Leather Cover, 200 Sheets 80 Pc 200.00 16,000.00 314 Gel Ink Sign Pen, 0.4 100 Pc 90.00 9,000.00 315 Gel Ink Sign Pen, 0.3 100 Pc 90.00 9,000.00 316 Toner Cartridge, Fujifilm Apeos 2150 Nda 5 Cart 3,500.00 17,500.00 317 Whiteboard 2ft X 2 Ft 2 Piece 2,000.00 4,000.00 318 Clamp - Stapler Remover 5 Pcs 30.00 150.00 319 Portable Bluetooth/wireless Speaker With Trolley (free Microphone) 1 Unit 6,695.00 6,695.00 320 Dishwashing Liquid Diy Kit, Lemon Scent (for 15-16 Liters Output) 25 Set 400.00 10,000.00 321 Fabric Conditioner Diy Kit, Sunrise Fresh Scent (for 20 Liters Output) 25 Set 450.00 11,250.00 322 Liquid Handsoap Diy Kit, Antibac Scent (for 15-16 Liters Output) 25 Set 400.00 10,000.00 323 Sack For 50kls Capacity (size: 64cm X 104cm) 76 Pc 15.00 1,140.00 324 Printer Ribbon, Epson Lq 310 2 Cart 250.00 500.00 325 Stackable Storage Box With Cover And Wheels (155l) 3 Pcs 1,100.00 3,300.00 Total 6,294,122.50 Delivery Schedule: Delivery Schedule: Sixty (60) Working Days From Receipt Of Ntp Drop-off Point: Da-rfo 1, City Of San Fernando, La Union Delivery Of The Goods Is Required Within Sixty (60) Working Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From January 7-27, 2025 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 14 January 2025, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 27 January 2025, 3:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 27 January 2025, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ January 6, 2025 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-033