Car Tenders

Description: Contract notice - general guideline, standard rule Open procedure (services) ZKJF GmbH - Lot-based award of primary school care services as part of the Hessian state program "Pact for All-Day Care" from the 2025/2026 school year. The subject of the award procedure is the lot ... MoreZKJF GmbH - Lot-based award of primary school care services as part of the Hessian state program "Pact for All-Day Care" from the 2025/2026 school year. The subject of the award procedure is the lot-based award of primary school care services as part of the Hessian state program "Pact for All-Day Care" from the 2025/2026 school year at thirteen different primary schools in the Main-Kinzig district. Lot 1: Biebertal Primary School Biebergemünd-bieber - Address: Biebertalstraße 12, 63599 Biebergemünd - Start of service: August 1st, 2025 - Number of students: 110 - Students to be supervised: 110 + Of which 90 in Module 1 + Of which 20 in Module 2 - Rooms: The primary school consists of two main buildings and a gymnasium. Around the building there is a spacious outdoor area with a playground and meadows. The total size of the school grounds, including the built-up areas, is 15,030 square meters. The area is not fenced. In the lower building on the ground floor there is the school administration, a teachers' room and a meeting room, as well as the staff toilets. On the 1st floor there are a total of 4 classrooms, a small multifunctional room with games and a larger multifunctional room with the option for exercise and a kitchenette. In the upper building there are a total of 6 classrooms, a workshop, a library and a small meeting room. The support association currently has two classrooms available for the care facility. Other rooms can be used for doing homework. All rooms used across grades and subjects (e.g. library or workshop) are available. As the upper building is in dire need of renovation, the school will be building a new building in the next few years. Plans for this already exist and are currently being revised. There is no specific date for the start of construction yet. This new building complex will include a cafeteria and multi-purpose rooms that can be used as part of the all-day program. A temporary spatial solution must be found for the start on August 1, 2025, as the school does not currently have a cafeteria with a serving kitchen. The support association has set up a room in the school with furniture and toys for the care facility, which is used exclusively for care. There is also a small kitchenette here. Water is heated by an electric boiler. Since the start of the last school year, the childcare service has used a second classroom for lunch and homework support. As part of the all-day pact, the school authority is planning to set up and use as many as four classrooms as possible in a multifunctional manner. One room (or two rooms if necessary) must be converted into a serving kitchen and temporary cafeteria for lunch at short notice. The upcoming new building will mean that some work will be carried out using mobile serving equipment. The primary school gym can also be used for afternoon activities. As it is currently also frequently used by the gymnastics club, clear agreements between all those involved and, if necessary, a reorganization of the times of use are necessary. - Further information can be found in the Biebertal Biebergemünd-Bieber primary school's concept for implementing the all-day pact (appendix II.2.a of the service description). Lot 2: Wilhelm-hauff-schule Flörsbachtal-lohrhaupten - Address: Gartenstraße 28, 63639 Flörsbachtal - Start of service: August 1st, 2025 - Number of students: 82 - Students to be supervised: 30 + of which 25 in module 1 + of which 5 in module 2 - Rooms: The school has sufficient and varied space. Grades 1-4 are housed in building I. Since there have been two classes in year 2 since last school year, there is an additional classroom in building III. The workshop, which is used by all classes, is also located in building III. The religious studies room is in the basement. Since two classes are expected to start in year 1 in the 2025/2026 school year, the religious studies room will move. In the administration building there is an auditorium on the first floor, which is used for parties and celebrations, as well as a school kitchen. The music room is on the first floor. For all parties and celebrations in the auditorium, this means that there are short distances when it comes to transporting instruments, etc. On the ground floor of the administration building there is a reading corner, which is very popular with the students. The school has a paved schoolyard on three levels. There are painted hopscotch games on the third level, a table tennis table on the lower level, a games cupboard in the entrance area in which all the available play equipment is stored, and mobile equipment that is stored in the teaching materials room (ground floor), movable soccer goals, a reading corner in the entrance area with lounge furniture for "lounging" and/or as a place of retreat, a beanbag in the reading corner, a mobile bookshelf in the reading corner, a "green" classroom with an awning on the former gymnastics lawn. The following rooms will be made available for all-day care in the 2025/2026 school year: 1. School kitchen with adjoining, former preparation room as a dining room; the corresponding furniture is not yet available. 2. The existing support association rooms will be included. The rooms for doing homework are known to the students. This room is currently equipped with 14 chairs and corresponding tables. There is also a room opposite for playing and relaxing (= rest area). 3. The schoolyard can be used as a place to play and exercise. The playground games are in the entrance area of the administration. The gym is available to the students and all clubs. Based on current knowledge, it should be possible to use the hall for the all-day offer. 4. There is a cooperation with the local library, which supplies the students with books every week - a selection of books is also available in the book corner. 5. The classrooms in building I can be used as needed. 6. The school premises are not barrier-free. 7. There are no rooms for special education and care for pupils with physical disabilities, for example. 8. The parents' room, the teachers' room or the DAZ room are available for meetings and administrative work by the care provider. 9. The Nawi room in building 3 is available for experiments and projects. In the future, corresponding working groups could take place here. - Further information can be found in the Wilhelm-Hauff-Schule Flörsbachtal-Lohrhaupten concept for implementing the pact for all-day schooling (appendix II.2.b of the service description). Lot 3: School at the village square Freigericht-Altenmittlau - Address: Kegelbahnstraße 59, 63579 Freigericht-Altenmittlau - Start of service: August 1st, 2025 - Number of students: 80 - Students to be supervised: 50 + of which 35 in module 1 + of which 15 in module 2 - Rooms: The school comprises three parts of the building: On the ground floor of the new building there are three classrooms, the student toilets and the technical room. On the first floor there is another classroom, the computer room, administration wing (teachers' room, school management office, caretaker's office and secretary's office) and the teachers' toilets. On the second floor/top floor there are two former classrooms that are used as a school kitchen and music room (choir, guitar and flute course, music club). These rooms were formerly used as care rooms and were renovated by the support association and the caretaker after the move to the old building. Directly past the administration wing is the passage to the attached community hall/gymnasium, which is mainly used for school sports. There are also changing rooms and other toilet facilities there. The gymnasium is currently available for sports activities on 2 afternoons (Zumba courses on Wednesdays, sports club on Thursdays). In the old building (110 years old) the windows were renovated/replaced 2 years ago so that the rooms can still be used. On the ground floor, after the extensive renovation last year, there is a former classroom that serves as a play and care room, the new school kitchen/canteen (former workshop), a laundry/cleaning room and student toilets. On the first floor you will find the lavishly expanded student library, which extends over 2 rooms (wall opening). It also houses the care office and, in the future, the office of the all-day coordinator. Two further rooms are connected by a hole in the wall and are available for educational homework supervision, free learning times and afternoons. On the 2nd floor/attic there are table/chair storage rooms and an attic that is not used. - Further information can be found in the concept of the school at Dorfplatz Freigericht-Altenmittlau for the implementation of the pact for all-day schooling (appendix II.2.c of the service description). Lot 4: Igelsgrundschule Gelnhausen Höchst - Address: Schulstraße 11, 63571 Gelnhausen - Start of service: August 1st, 2025 - Number of pupils: 161 - Pupils to be supervised: 120 + of which 90 in module 1 + of which 30 in module 2 - Rooms: There are currently two separate rooms in the classroom wing available for school supervision. In addition, other multifunctional rooms are used for learning, play and relaxation phases. There is a kitchen with seating for eating meals. The school library also serves as a quiet room and the auditorium is used by children to play together when the weather is bad. Homework support and support group work takes place in classrooms, as these promote a learning atmosphere by being equipped with tables and chairs. The study groups take place in the multifunctional rooms and also in the playground, in the gym or in the garden area. However, the current space is not sufficient for around 90 students. The kitchen is not designed for such a high number of students. In particular, there is no cafeteria. The concept and use of the rooms is to be re-planned and urgently required structural renovation measures are to be implemented as quickly as possible. These are currently planned for 2026. - Further information can be found in the concept of the Igelsgrundschule Gelnhausen Höchst for the implementation of the pact for the whole day (appendix II.2.d of the service description). Lot 5: Herzbergschule Roth Gelnhausen Roth - Address: Rathausstraße 1, 63571 Gelnhausen - Start of service: August 1st, 2025 - Number of students: 84 - Students to be supervised: 55 + of which 35 in module 1 + of which 20 in module 2 - Rooms: The space situation at the Herzbergschule is severely restricted by its location in the middle of town and the right of use of the clubs in the town hall. Nevertheless, an attempt was made to use the little space as best as possible, which in turn leads to increased staff deployment, especially during the full day. The division of the school into two buildings means that double supervision is necessary. The distribution of the number of children according to the number of seats available in the rooms is also a factor. The current spatial conditions can only be reconciled with the school development goals of the Herzbergschule to a limited extent. The existing conditions were optimized together with the school authority. The buildings are separated by a traffic-calmed street. The two buildings, some of which are listed buildings, contain 5 classrooms ranging in size from 49m² to 56m² with ergonomic furniture. There is a multifunctional room (54m²) for the preparatory course, the intensive course, ethics lessons, work time and study groups. There is also a care room (50m²) with a kitchenette and a PC workstation, a PC room, the school library, the secretary's office, the teachers' room and a consultation room. Depending on the weather, the municipal playground and the neighboring village square are used as the schoolyard. The public village square is on the Mkk property, but due to its dual use it can only be included in the Herzbergschule's educational concept to a limited extent. The school relies on flexible, mobile equipment, but the limited storage options mean that the capacity is exhausted. Thanks to the cooperation with the Roth Music Association and TV Roth, their club rooms can be used to counteract the ever-increasing lack of space. The music association room is used as a music room and as an alternative for supervision when it rains. It is not possible to design the room to be child-friendly. The TV Roth club room is available for dance groups and the pre-holiday parties that take place four times a year. For sports lessons, the Willi Bechtold Hall is within walking distance. Unfortunately, the city of Gelnhausen rents out the room at regular intervals, which means that it is not used at all. The teachers' room was redesigned in 2017 and offers limited opportunities for preparing for or following up on lessons. Specialist teachers without a classroom do not have the opportunity to store their own materials in the teachers' room. The staff meeting of the teaching team takes place in the care room on the children's furniture. The furniture does not meet the requirements of ergonomics in the workplace. The serving kitchen and the administrative computer of the all-day coordinator are also located in this room. Due to the age of the school building and the former town hall, the buildings do not have spacious hallway areas. In this respect, there is no possibility of expanding the space available. Since the school does not have a large room for the whole school community, all events have to take place outdoors and are therefore always dependent on the weather. - Further information can be found in the Herzbergschule Roth Gelnhausen Roth concept for implementing the pact for all-day schooling (appendix II.2.e of the service description). Lot 6: School at the Hofgut Mittel-gründau - Address: Hofweg 1, 63584 Gründau - Start of service: August 1st, 2025 - Number of students: 86 - Students to be cared for: 35 + Of which 25 in Module 1 + Of which 10 in Module 2 - Rooms: The school's existing rooms, including the multifunctional rooms and the container building, are used for all-day care. The outdoor area with the play equipment also offers space for exercise and play. The school at the Hofgut has four classrooms, two multifunctional rooms and an outdoor area with play equipment. One multifunctional room is currently used as an additional classroom due to the high number of students in class 4, as well as an inclusion room for the individual instruction of a child with a focus on learning. The other multifunctional room serves as a school library, PC and media room, as well as a room for remedial teaching and school social work. One of the classrooms is a little larger and has a separate outside door that faces the schoolyard playground and the current care building. Due to its location and size, it is ideally suited as one of the future rooms for homework supervision and other all-day activities. Like the classrooms, the multifunctional rooms have digital whiteboards and some work tables with chairs. Another room serves as a materials and workshop room. The administration (school management and secretariat) use two connected office rooms. The school itself has no cafeteria, dining rooms or suitable kitchen for lunch. There is only a fitted kitchen in the teachers' room. The municipality's container building, which is currently used by the "villa Krake" care center, is also possibly available. It could possibly continue to be used as a care and leisure center if the necessary renovation work on the kitchen were carried out in a timely manner. Long-term planning for the construction of a needs-based cafeteria with a kitchen and other rooms on the school premises or the adjacent municipal property is being developed in cooperation with the municipality and the district. In the near future, there will probably be minor adjustments and extensions to the furniture and equipment in the school rooms and the care rooms. In order to be able to use the classrooms both as teaching rooms and as care rooms for homework and other activities, multifunctional furniture, rollable shelves, rollable room divider shelves and, above all, additional height-adjustable seating are essential. - Further information can be found in the concept of the school at Hofgut Mittel-Gründau for the implementation of the pact for all-day schooling (appendix II.2.f of the service description). Lot 7: Geisbergschule Linsengericht Eidengesäß - Address: Schulstraße 29, 63589 Linsengericht - Start of service: August 1st, 2025 - Number of students: 227 - Students to be supervised: 110 + 80 of them in module 1 + 30 of them in module 2 - Rooms: The Geisbergschule is spread over three wings with the administration rooms, the teachers' room, the specialist rooms and the classrooms, all of which are connected to each other but are accessible via different entrances from the upper and lower schoolyard. There are currently 10 classes belonging to the Geisbergschule. The teachers' room is used jointly by the staff of the Geisbergschule and the Brentanoschule. In addition to a first aid room and three administrative rooms, there is a relaxation room that was newly furnished in the 2023/24 school year as part of the project week. The school has additional specialist rooms: a movement room, a multi-purpose room (music/meeting room), a kitchen, a workshop, a network room and a school library. All specialist rooms are shared with the speech therapy school and are regularly and actively used by both schools during morning lessons. The seven speech therapy classes of the Brentano School with a total of 54 pupils are represented at the Geisberg School and are therefore primarily housed in the classrooms in the wing on the upper school yard. Due to the almost daily presence of the speech therapists, an additional support room is primarily used by the Brentano School. Time overlaps between the speech therapy lessons at the speech therapy school and the preparatory course at the Geisberg School recently made it necessary for the latter to take place in a room next to the workshop. The supervision of the pupils before and after lessons currently takes place in an extension with adjacent containers on the upper school yard. There are four rooms in the care center, the fourth of which was built on as a residential container. The kitchen and dining room are also housed in a container built specifically for this purpose. The school's classrooms are available for homework support. The care center also uses the outdoor area and the gymnasium and, depending on staff capacity, parts of the former caretaker's house, which is also on the school premises but urgently needs to be renovated and equipped with furniture and play materials. The gymnasium is shared with the speech therapy school in the mornings and used by the care center and the Geislitz gymnastics club in the afternoons. For swimming lessons in the third year, all children go to the indoor pool in Gelnhausen with their swimming teachers. Due to the high birth rate and the looming three-stream system at the Geisberg School, as well as the steadily growing speech therapy department at the Brentano School, the spatial situation at the Geisberg School is becoming increasingly problematic. The school is in contact with the school authority in this regard. With regard to the rooms, the following measures have already been planned or will be continued: The homework groups are distributed across different classrooms. AGs can take place in the classrooms and specialist rooms in the afternoon, but in the morning lessons the options for moving to other rooms outside of classrooms are limited. Fixed plans for the specialist rooms are not possible due to the fact that two schools are under one roof and share the specialist rooms. With regard to the gym, the Brentano School has been allocated a fixed day of the week for physical education and another fixed period for the weeks in which the indoor pool is closed and no swimming lessons can take place. The situation is similar with the kitchen and other specialist rooms. There will probably still be four lunch groups and these will be mixed together, also changing daily, depending on when lessons end for the respective classes. Every change in the timetable makes a change in the composition of the meal groups unavoidable. The options in the container have proven to be extremely limited. There is still no solution for this. It still needs to be clarified with the school authority how the lunch situation can be alleviated. As part of the digital pact, the network room was re-equipped. There are now a total of 56 iPads available, 20 of which always remain in the network room, while the others can be borrowed for the classrooms (e.g. when doing homework, for research). The room and the iPads can also be used in support lessons and extracurricular activities. - Further information can be found in the Geisbergschule Linsengericht Eidengesäß concept for implementing the pact for all-day schooling (appendix II.2.g of the service description). Lot 8: Erich-Simdorn-Schule Neuberg - Address: Rüdigheimer Straße, 63543 Neuberg - Start of service: August 1st, 2025 - Number of students: 192 - Students to be supervised: 105 + 80 of them in module 1 + 25 of them in module 2 - Rooms: The student care service is currently using an extension consisting of 2 maxi containers, two former classrooms in the pavilion, and in the afternoons the rooms on the ground floor in the main building (2 classrooms and the craft/music room for homework and homework supervision). As part of the all-day school, the library in the main building can be integrated into the room concept. Support offers take place in the existing rooms in the main building. The sports hall is used by the school in the mornings and by local clubs from 2:45 p.m. The sports hall is used for sports groups in alternating mode from 12.15 p.m. to 1.45 p.m. In the summer, the Erich Simdorn School uses the neighboring sports grounds of the municipality of Neuberg. There is currently space for 36 pupils to eat lunch in the cafeteria kitchen. Lunch is currently served to 90 children in five shifts. The kitchen has a food counter with heating devices, a cold food counter, a plate warmer, a crockery cupboard, a refrigerator, an industrial dishwasher, a washing machine, a tumble dryer and a sink with a hand basin. There is also a kitchenette with a sink, two stoves and two ovens. The school has two exercise rooms, the gym and the schoolyard. There are also a number of project rooms, such as a library and a music and craft room. The school also has options for teacher workstations and a teacher's room. - Further information is available in the concept The Erich-Simdorn-Schule Neuberg for the implementation of the pact for all-day schooling (appendix II.2.h of the service description). Lot 9: Adolf-Reichwein-Schule Rodenbach - Address: Alzenauer Str. 25, 63517 Rodenbach - Start of service: August 1st, 2025 - Number of students: 770 in total, of which 398 in the elementary school - Students to be supervised: 150 + of which 100 in module 1 + of which 50 in module 2 - Rooms: The rooms currently available are in the elementary school wing, in the so-called "b-wing". In the two-story building, there is a classroom, the media library, the secondary school workshop and the toilets on the ground floor. On the first floor there are three rooms of the supervised elementary school, a school kitchen and the cafeteria. Opposite there are two more classrooms and toilets on the first floor of the so-called "a-wing", on the ground floor there is the preparatory class, a storage room and the art room, which is currently used by the secondary school. In an extension, in the "e-wing", on the edge of the schoolyard there is the auditorium, which is used for teaching purposes in the morning. The auditorium is also used for a variety of events such as conferences, information events, parents' evenings, parents' cafe on the first day of school, as an exercise room, as a practice room for clubs and much more. From the 2025/26 school year, the new room concept envisages the classrooms being used for lessons in the morning and at lunchtime/afternoons for homework supervision, study time or for the support of individual children or small groups. Appropriate furniture should enable multifunctional use of the rooms (lockable, with wheels). Discussions with the school authority are already taking place. There are currently two sports halls available, which are very busy in the mornings due to physical education classes for primary and secondary school students. In the afternoons, the gyms are mainly used by clubs. Since the halls are to be used all day, discussions with the clubs are planned with a view to cooperation. It must already be taken into account that, given the increasing number of pupils, there are not enough classrooms and that more containers will have to be provided. The auditorium will continue to be available primarily for lessons in the mornings. It will also still be possible to use it for school events and parties. The auditorium can be used as part of the all-day offerings, e.g. for a theater group, for arts activities or quiet exercise activities (relaxation, yoga). - Further information can be found in the Adolf Reichwein School Rodenbach's concept for implementing the all-day pact (Appendix II.2.i of the service description). Lot 10: Sterntalerschule Schöneck - Address: Wiesenau 3, 61137 Schöneck - Start of service: August 1st, 2025 - Number of students: 173 - Students to be supervised: 130 + 85 of them in module 1 + 45 of them in module 2 - Rooms: After completion of the new building, the Sterntalerschule will have 8 classrooms, three multifunctional specialist/ag/care rooms, an open differentiation area, a multifunctional room, a cafeteria and a parents' meeting room (approx. 3m³). There are different rooms in which different activities take place for the children: four classrooms are available as permanent rooms for homework supervision after the end of lessons. There is a games room with a table football table, air hockey, board games, puzzles, a Barbie house and role-playing games. In the creative room you will find everything to do with handicrafts, painting, gluing, cutting, ironing beads etc. The construction room is used for building, playing with Lego, includes a marble run, construction toys and much more. The room is equipped with floor mats, tables and chairs. There is also a so-called mat room, which is used for romping. This is equipped with mats, cushions, foam building blocks, swimming noodles and more. Here 10 children can romp around at the same time for half an hour under the supervision of a carer. There is also a relaxation room and a music room for musical activities. Like the aforementioned rooms, the classrooms are also available for multifunctional use. There is a gym and a fairly spacious outdoor area on the school premises. - Further information can be found in the Sterntalerschule Schöneck concept for implementing the pact for the whole day (appendix II.2.h of the service description). Lot 11: Friedrich-ebert-schule Schöneck - Address: Bleichstraße 9, 61137 Schöneck - Start of service: August 1st, 2025 - Number of students: 240 - Students to be supervised: 135 + of which 90 in module 1 + of which 45 in module 2 - Rooms: Classrooms are available for homework or individual learning time. It is possible to set up different learning groups that are spatially separated. Further supervision takes place in three rooms in the cafeteria wing. There are classrooms and a supervision room with sufficient workstations available, in which both the preparatory courses and support offers take place. There is a gymnasium. The hall plan is adapted annually to the needs of the all-day concept. In the outdoor area, the existing facilities (green classroom, play bushes, school garden, etc.) have been supplemented by a balance bar, among other things. In bad weather, the Erich-Simdorn-Halle right next to the school can be used - in consultation with AGS and clubs. The school also has a room for breaks and lunch. The cafeteria set up for this purpose serves the school and is also used for teaching purposes. - Further information can be found in the Friedrich-Ebert-Schule Schöneck concept for implementing the pact for all-day schooling (appendix II.2.k of the service description). Lot 12: Aufenau Primary School Wächtersbach/aufenau - Address: Frankfurter Str. 26, 63607 Wächtersbach - Start of service: August 1st, 2025 - Number of students: 110 - Students to be supervised: 80 + 60 of them in module 1 + 20 of them in module 2 - Rooms: The primary school's rooms consist of two building complexes: an old building from 1910 and an extension from 1997. In total, the following are available for school purposes: seven classrooms, a cafeteria with kitchen, a multi-purpose room, a teachers' room with materials room, a multifunctional room (craft and music room, room for preparatory course, etc.), a library and two office rooms. The school grounds have a fenced-in playground with climbing equipment, a swing, a play tower with a slide and a sandpit, a large lawn, a green classroom, a playhouse with balls, ropes, pedalos etc., an asphalted schoolyard and a football pitch, a paved area between the two parts of the building with a table tennis table and a car park with 9 spaces. As the school does not have a gymnasium, physical education classes take place in the rooms of the cultural centre in Aufenau. The all-day offer takes place mainly in the old building and in the multi-purpose room of the new building. Classrooms are occasionally used. After meals, the children can play outside or keep themselves busy inside when it rains. - Further information can be found in the concept of the Aufenau Wächtersbach/Aufenau primary school for the implementation of the all-day pact (appendix II.2.l of the service description). Lot 13: Hasela School Linsengericht-Altenhaßlau - Address: Bergstrasse 18, 63589 Linsengericht - Start of service: August 1st, 2025 - Number of students: 137 - Students to be supervised: 70 + 50 of them in module 1 + 20 of them in module 2 - Rooms: The Hasela School has 8 classrooms, a teachers' room, three administration rooms, a tea kitchen and an auditorium/atrium. There are no additional specialist rooms such as music, art or craft rooms, kitchen, parent-teacher room or differentiation or rest rooms. One administration room (the secretariat) was divided: In the rear area, a workstation for the secretary was created; in the front area there is a small student library. A container for supervision is used by the preparatory course in the mornings. The gym is a three-field hall and is used by both the Hasela School and the Brentano School. Occupancy is coordinated with the Brentano School every six months. As the Brentano School is an all-day school, capacity is limited. Swimming lessons, which are given in the third year, take place in the indoor and outdoor pools of the town of Gelnhausen. The following rooms are available for the implementation of the so-called exercise activities: schoolyard, adventure playground behind the school and sports field (artificial turf) directly opposite the school (also used as a play area during recess). - Further information can be found in the Hasela School Linsengericht-Altenhaßlau concept for implementing the pact for all-day schooling (appendix II.2.m of the service description).

Details: Task: Execution of Renovation of the Internal Elevation of the Warehouse Tunnel On Level -1 of Wroclaw Główny Railway Station, Including: 1. The subject of the Order is the execution of renovation of the internal elevation of the warehouse tunnel on level -1 of Wroclaw Główny Railway Station, Detailed Scope of Works in accordance with the Measurement - See Appendix entitled Request for Proposals and Measurement S. 1. 2. Purchase of materials, securing the area, removal of rubble are the responsibility of the Contractor. Place for a waste container in the delivery zone in the underground car park adjacent to the tunnel. 3. Due to the need to maintain continuity of deliveries to service premises, the work will be carried out in sections, while maintaining a passage for tenants, after prior arrangement of the Works Schedule with the Facility Manager. 4. Location: Wroclaw Główny Railway Station, Ul. Piłsudskiego 105, 50-085 Wrocław (according to the attached overview map - see the appendix entitled Tunnel to be renovated - location in the building) 5. Payment: 30-day bank transfer 6. Settlement: Lump sum based on the offer and acceptance protocol 7. Deadline for completion: Up to 8 weeks from signing the order

Details: B01-08 Interior doors, toilet partitions, sliding door, movable partition Short description of the property: The construction project involves a free-standing 2-storey new building of a sports changing room with a club restaurant. The new building is to be an efficiency building and achieve level 40 (beg). The construction project is in drinking water zone IIIB. Various requirements must be observed. Due to the approved BBSR funding (Federal Institute for Building, Urban and Spatial Research), extensive requirements must be met in terms of the quality of the materials, particularly in reinforced concrete and timber construction. The building is planned as a mixed construction. The ground floor will be built predominantly solid and the upper floor primarily in timber construction and with only a few reinforced concrete walls. The roof is divided into two parts, a pent roof with solar panels is planned to the north and the building will have a flat green roof to the south. An elevator will be integrated to ensure accessibility. Rainwater drainage is carried out via rainwater troughs. The heating is operated via surface collectors, and the hot water supply is decentralized. A bicycle shelter will also be built on the construction site, as well as car parking spaces.

Details: The town of Königs Wusterhausen intends to award the construction work in the construction project "conversion of bus stops with crossing aid and car park Niederlehmer Chaussee L30" in 15713 Königs Wusterhausen - Ot Wernsdorf. The subject of this tendering procedure is the construction preparation / clearing of the construction site. Rough quantities of the measure: 1. Construction site preparation - setting up and clearing the construction site - maintaining the construction site - staking out the construction area - erecting, maintaining and removing 20.00 m of construction fencing 2. Traffic safety - traffic law. Obtaining orders - 20.00 m of protective fence erected - clearing - moving the protective fence 3. Demolition, felling and clearing work - 23.00 pieces of felling trees, trunk circumference 30 - 50 cm - 18.00 pieces of felling trees, trunk circumference >50 - 100 cm - 27.00 pieces of felling trees, trunk circumference >100 - 200 cm - 2.00 pieces of felling trees, trunk circumference >200 cm - 250 cm - 3,500.00 m2 of building site clearing branches, growth, trunk circumference. Up to 50 cm - professional disposal of cuttings, trunks, roots and crown material

Details: B01-40 Outdoor facilities Laying of underground sewage pipes, construction of a lifting station and a grease trap, paving work, planting work, fence construction and metalwork Brief description of the object: The construction project is a free-standing 2-storey new building of a sports changing room with a club restaurant. The new building is to be an efficiency building and achieve level 40 (beg). The construction project is in drinking water zone IIIB. Various requirements must be observed. Due to the approved BBSR funding (Federal Institute for Building, Urban and Spatial Research), extensive requirements must be met in terms of the quality of the materials, particularly in reinforced concrete and timber construction. The building is planned to be a mixed construction method. The ground floor will be built predominantly solid and the upper floor primarily in timber construction and with only a few reinforced concrete walls. The roof is divided into two parts: a pent roof with solar panels is planned to the north and a flat green roof to the south. An elevator will be integrated to ensure accessibility. Rainwater drainage will be via rain gutters. Heating will be operated via surface collectors and hot water will be provided decentrally. A bicycle shelter will also be built in the construction area and car parking spaces will be planned.

Details: Description Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 1 Lot Communications Equipment 2,200,000.00 6 Unit Base Radio, Ntc-type Approved Equipment, 136-174 Mhz Frequency Range, 50 Watts Maximum Output Power, Programmable To Ntc Assigned Frequency Specifications General A. Frequency Range - Uhf: 400-470mhz*; Vhf:136-174mhz B. Channel Capacity- 48 (16 Channels Per Zone) C. Zone Capacity - 3 D. Channel Spacing - 12.5/25khz E. Operating Voltage - 13.6 V ± 15% F. Current Drain - Standby: Around 0.3a Receive: < 1>1ghz G. Weight - 1100g H. Dimensions - 164 X 43 X150 Mm I. Frequency Stability - ±0.5 Ppm J. Antenna Impedance - 50ω Receiver A. Sensitivity - Analog: 0.3µv (12db Sinad); 0.22µv (typical) (12db Sinad); 0.4µv (20db Sinad) Digital: 0.3µv/bers5% B. Selectivity - Tia-603: 60db @ 12.5khz/ 70db @ 25khz Etsi: 60db @ 12.5khz/ 70db @ 25khz C. Intermodulation - Tia-603: 70db @ 12.5/25khz Etsi: 65db @ 12.5/25khz D. Spurious Response Rejection- Tia-603: 70db @ 12.5/25khz Etsi: 70db @ 12.5/25khz E. Blocking- Tia-603: 90db Etsi: 84db E. Hum And Noise- 40db @ 12.5khz; 45db @ 25khz F. Rated Audio Power Output- Internal (@ 16 Ohm Load): 4w External (@8 Ohm Load): 8w Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 1 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) G. Max Audio Power Output - Internal (@16 Ohm Load): 6w External (@ 8ohm Load): 12w H. Rated Audio Distortion - ≤3% I. Audio Response - +1~-3db J. Conducted Spurious Emission - <-57dbm Transmitter A. Rf Power Output – Low Power Version: 1-25w (uhf/vhf) High Power Version: 5-45w (uhf) / 5-50w (vhf) B. Fm Modulation – 11kof3e @ 12.5khz; 16k0fe @ 25 Khz’ C. 4fsk Digital Modulation – 12.5khz Data Only: 7k60fxd 12.5khz Data & Voice:7k60fxw D. Conducted/radiated Emission - -36dbm<1ghz>1ghz E. Modulation Limiting- ±205khz @ 12.5khz F. Fm Hum & Noise- 40db @ 12.5khz 45db @ 25khz G. Adjacent Channel Power- 60db @ 12.5khz; 70db @ 25khz’ H. Audio Response- +1 ~ -3db I. Audio Distortion- ≤3% J. Digital Vocoder Type- Ambe+2™ Or Selp K. Digital Protocol- Etsi-tsi02 361-1, -2, -3 1 Lot Engineering Plans And Services (professional Fee) 30 Unit Handheld Radio (vhf), Ntc Type Approved Equipment, 136-174mhz Frequency Range, 5 Watts' Maximum Out-put Power, Programmable To Ntc Award Frequency. Accessories: 1. Belt Clip 2. Standard Desk Charger 3. Rubber Duck Antenna 4. Manual General: A. Frequency Range- Uhf: 400-470 Mhz, Vhf:136-174mhz B. Channel Capacity - 128 C. Zone Capacity - 8 D. Zone Channel - 16 E. Channel Spacing - 12.5khz/20kh/25khz F. Operating Voltage -7.4v G. Battery - 1500mah (standard); 2000mah (optional) H. Battery Life - (5/5/90 Duty Cycle, High Tx Power) - Analog: 12h (1500mah), 16h (2000mah) - Digital: 16h (1500mah), 21h (2000mah) I. Frequency Stability - ±0.5ppm J. Antennal Impedance - 50ω K. Weight (with Antenna & Battery) -230g L. Dimensions (h X W X D) - 115 X 55 X 295mm M. Display - 1.77 Inch Tft Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 2 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) Receiver: A. Sensitivity - Digital: 0.18µv / Bers % Analog: 0.18µv(12db Sinad) B. Adjacent Channel Selectivity - Tia -603: 60db@12.5khz, 70db@20/25khz Etsi: 60db@12.5khz, 70db@20/25khz C. Intermodulation- Tia- 603:70db@12.5/20/25khz Etsi: 65db@12.5/20/25khz D.spurious Response Rejection- Tia -603: 70db@ 12.5/20/25khz Etsi: 70db@12.5/20/25khz E. Blocking - Tia -603:80db Etsi: 84db F. Hum And Noise- 40db@20khz, 45db@25khz G. Rated Audio Power Output - 1w H. Rated Audio Distortion - <3>1ghz E. Modulation Limiting - +2.5khz@12.5khz, +4.0khz@20khz, 15.0khz@25khz F. Fm Hum&noise - 40db@12.5khz, 43db@20khz, 45db@25khz G. Adjacent Channel Power- 60db@12.5khz, 70db@20/25khz H. Audio Response- +1 To -3db I. Audio Distorted - ≤% J. Digital Vocoder Type - Ambe +2™ Environmental: A. Operating Temperature - -30°~+60°c B. Storage Temperature - -40°c~+85°c C. Esd - Iec 61000-4.2 (level 4) ±8kv (contact); ±15kv(air) D. Dust And Water Intrusion - Iec60529-ip54 E. Humidity - Mil -std-810g F. Shock And Vibration - Mil-std-810g 1 Lot Installation Of Communication Equipment 1 Unit Mini Duplexer (vhf) -tuned To Working Frequency, 50 Watts 7 Unit Mobile Radio (vhf) - Ntc-approved Type (commercial), 50w, Programmable To Ntc Assigned Frequency Frequency Range 136-174 Mhz, With Magnetic Mount Mobile Antenna 6 Lot Ntc Permit To Purchase/possess And Radio Station License 6 (six) Units Base Radio 30 Lot Ntc Permit To Purchase/possess And Radio Station License For 30 (thirty) Units Handheld Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 3 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 Lot Ntc Permit To Purchase/possess And Radio Station License For 1 (one) Unit Repeater 7 Lot Ntc Permit To Purchase/possess And Radio Station License For 7 (seven) Mobile Radio 1 Lot Programming, Commissioning/propagation And Testing And Delivery (30 Days) Additional Requirements: * Provide A Network Diagram That Is Applicable To The Area * With History/experience In The Installation Of A Working Communication System In The Area *accredited With Ntc-car 1 Unit Repeater (vhf), Ntc-type Approved Equipment, 136-174 Mhz Frequency Range, 50 Watts Maximum Output Power, Programmable To Ntc Assigned Frequency. Specifications: General A. Frequency Range - Uhf 1: 400-470mhz; Uhf 2: 450-520mhz; Uhf 3: 350-400mhz; Vhf: 136-174 Mhz B. Channel Capacity - 16 C. Channel Spacing - 12.5khz/20khz/25 Khz D. Operating Voltage - 13.6v±15% E. Current Drain - Standby: ≤0.8a; Transmit:≤11a F. Frequency Stability - ± O.5ppm G. Antenna Impedance - 50ω H. Duty Cycle - 100% I. Dimensions (h X W X D) - 88 X 483 X 366 Mm J. Weight - 8.5 Kg K. Lcd Display - 220 X 176 Pixels, 262000 Colors; 2.0 Inch, 4 Rows Receiver A. Sensitivity - Analog: 0.28µv (12 Db Sinad); 0.22µv (typical) 12db Sinad) 0.4 Μv (20db Sinad) Digital: 0.3µv/ber5% B. Adjacent Channel Selectivity- Tia-603: 65db @ 12.5 Khz; 75 Db @20/25khz Etsi: 65 Db @ 12.5 Khz; 75 Db @ 20/25khz C. Intermodulation- Tia -603: 75db @ 12.5/20/25khz Etsi: 70db @ 12.5/20/25khz D. Spurious Response Rejection Tia-603: 80db @ 12.5/20/25khz Etsi: 80db @ 12.5/20/25khz E. Hum And Noise - 40db@ 12.5khz; 43db@20khz; 45db@25khz F. Rated Audio Power Output - 0.5w G. Rated Audio Distortion- ≤3% H. Audio Response - +1 ~ -3db I. Conducted Spurious Emission - <-57dbm Transmitter Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 4 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) A. Rf Power Output - 5-50w B. Fm Modulation - 11k0f3e @ 12.5khz; 14k0f3e @ 20khz; 16k0f3e @ 25 Khz C. 45sk Digital Modulation - 12.5khz Data Only: 7k60fxd; 12.5khz Data And Voice:7k60fxw D. Conducted/radiated Emission - -36dbm ≤ 1ghz; -30dbm > 1ghz E. Modulation Limiting - ±2.5khz @ 12.5 Khz; ±4.0khz @ 20khz; ±5.0khz @ 25khz F. Fm Hum & Noise - 40db @ 12.5khz; 43db @ 20khz; 45db @ 25khz G. Adjacent Channel Power - 60db @ 12.5khz; 70db @ 20/25khz H. Audio Response - +1 ~ -3db I. Audio Distortion - ≤3% J. Digital Vocoder Type - Ambe +2™, Selp, Nvoc, Comm K. Digital Protocol - Etsi-ts102 361-1, -2-, -3 Environmental Specifications A. Operating Temperature - -30°c ~+60°c B. Storage Temperature - -40°c ~ +85°c Accessories: 1. 1 Unit Tx Antenna (2 Elements Of Variloop Antenna) Cut, Fold And Tuned To Ntc Tx Assigned Frequency 2. 1 Unit Rx Antenna (2 Elements Of Variloop Antenna) Cut, Fold And Tuned To Ntc Tx Frequency 3. 100 M Coax Cable Rg-8 (japan) 4. 4 Pcs. Pi-259 Connector (good Quality) 5. Regulated Power Supply (13.8 V Dc/30 Amp) 6. With Pt Mask Antenna And Repeater Cabinet This Is A Lot Bidding, Partial Bids Are Not Allowed Please Indicate Brands Of Offers And Attach Technical Brochures In The Eligibility And Technical Proposal Please Indicate Unit Prices Of Offers In The Financial Proposal Bidders Must Possess Valid Mayor's/business Permit With A Relevant Line Of Business In The Supply, Delivery And Installation Of Communications Equipment For Use Of Bfp Under Pr No. 2 Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 5 Of 5

Details: Subject of the Proceeding: 1. Asterix car computer 2. Xid 36x96 board 3. Xid 230 monitor Subject Requirements: 1. Desired Completion Date 7 Calendar Days. 2. Transport of Goods at the Seller's Cost and Risk, to the Ordering Party's Headquarters (polregio Sa, Ul. Gazowa 4, 20-406 Lublin). 3. Payment Terms: 30 Days from the Date of Invoice Delivery. In the Case of Delivery of the Invoice After the Order Execution Date, the 30-Day Period Will Be Counted from the Date of Delivery of the Invoice to the Ordering Party, While In the Case of Delivery of the Invoice Before Order Execution, the Period Will Be Counted from the Date of Order Execution. 4. Declaration from the Seller That the Goods Delivered Are Brand New and Free from Defects. 5. Required Warranty: 12 Months from the Date of Delivery to the Ordering Party (polregio Sa). 6. Required Acceptance Certificate 3.1. Additional Provisions: 1. The Contractor undertakes to pay the Ordering Party (polregio Sa) a contractual penalty for delay in implementation in the amount of 5% of the Contractor's net remuneration for each day of delay. However, this penalty may amount to a maximum of 50% of the Order Value. 2. The Ordering Party (polregio Sa) reserves the right to: A) End the Proceedings before the expiry of the time, with or without a choice made and without giving a reason, and to invalidate the Proceedings; B) Change the Terms of the Conducted Proceedings before the expiry of the deadline for submitting price information; C) After the end of the Inquiry (rfi), Close the Proceedings or start the next Stages in the form of submitting offers/electronic auction/negotiations; D) Free choice of the offer. In the "Organizer's attachments" tab you will find the GDPR Information Clause.

Details: Description Comelec 1. Paper, Multi-purpose, A4 Size 70gsm 30 Ream 2. Paper, Multi-purpose, Legal Size 70gsm 25 Ream 3. Fastener Metal, Non-sharp Edges, 50 Sets Per Box 5 Box 4. Tape Transparent, 24mm 6 Roll 5. Tape Transparent, 48mm 4 Roll 6. Tape Masking 48mm 15 Roll 7. Tape Packaging 48mm 12 Roll 8. Correction Tape 10 Piece 9. Rubber Bond #18 4 Box 10. Epson Ink #001 Black 3 Bot. 11. Epson Ink #003 Black 5 Bot 12. Ballpen Black 50 Pcs Per Box 2 Box 13. Staple Wire #35 3 Box 14. Marker, Permanent, Black, Broad 12 Piece 15. Marker, Refillable, Black, Broad 3 Piece 16. Ink Refill, Black 2 Bot. 17. Brown Envelope Short Size 6 Dozen 18. Brown Envelope Long 6 Dozen Coa 19. Alcohol, 70% Ethyl 500ml 4 Bot 20. Red Ballpen, 0.5 24 Piece 21. Blue Ballpen, 0.5 24 Piece 22. Black Ballpen, 0.5 24 Piece 23. Toilet Tissue Paper, 2 Ply, 12’s Per Pack 3 Pack 24. File Folder Long White 100 Piece 25. Data File Box Long Size W/o Cover 5 Piece 26. Plastic Ring Binding, 25mm 5 Piece 27. Bond Paper, Letter Size, 70gsm 10 Ream 28. Bond Paper A4 Size, 70gsm 5 Ream 29. Bond Paper Legal Size, 70gsm 5 Ream 30. Transparent Binding Cover Short Size, 100’s 1 Box 31. Correction Tape 5 Piece 32. Moroco Binding Cover Short 100 Piece 33. Long Expandable Kraft W/ Garter 50 Piece 34. Permanent Marker, Black, Fine 2 Piece 35. Permanent Marker Refill Ink, Black 1 Bot. 36. White Glue 130ml 2 Bot. 37. Pencil Eraser, Large Size 3 Piece 38. Pencil #2, 12’s Per Box 1 Box 39. Air Freshener, 500ml Per Bot. Aerosol Type 2 Bot. 40. Dishwashing Liquid 250ml Per Bot.(lemon) 1 Bot. 41. Dishwashing Sponge 2 Piece 42. Twine Straw 1kl Per Roll 1 Roll 43. Trash Bag Large Size 50 Piece 44. Epson Ink 001, Black 3 Bot. 45. Epson Ink 001, Cyan 1 Bot. 46. Epson Ink 001, Magenta 1 Bot. 47. Epson Ink 001, Yellow 1 Bot. Mbo 48. Sign Pen Black, 0.3 10 Piece 49. Sign Pen Blue, 0.3 6 Piece 50. Air Freshener, 320ml, Aerosol Type 2 Piece 51. Glass Cleaner, 500ml Per Bot. 2 Bot. 52. Fluorescent Bulb, 12watts, Led 1 Unit 53. Bond Paper Long Size, 80 Gsm 3 Ream 54. Bond Paper Short Size, 80 Gsm 3 Ream 55. Epson Ink #001 Black 3 Bot. 56. Epson Ink #001 Magenta 1 Bot. 57. Epson Ink #001 Yellow 1 Bot. 58. Epson Ink #001 Cyan 1 Bot. 59. Epson Ink #003 Black 3 Bot. 60. Epson Ink #003 Magenta 1 Bot. 61. Epson Ink #003 Yellow 1 Bot. 62. Epson Ink #003 Cyan 1 Bot. 63. Data File Box, Long With Cover 3 Piece 64. Staple Wire #35 1 Box 65. Staple # 35, Heavy Duty 2 Piece 66. Long Folder 2 Dozen 67. Alcohol, 70% Ethyl, 500ml 6 Bot. 68. Toilet Tissue Paper, 12’s Per Pack 2 Pack Meo 69. A4 Bond Paper 210x297mm, 80gsm 2 Ream 70. Long Bond Paper 216x330mm, 80gsm 3 Ream 71. Correction Tape 8mx5mm 2 Piece 72. White Long Folder 50 Piece 73. Clear Cover Long For Book Binding (10’s Per Pack) 1 Pack 74. Flat Rubber Band 350g 1 Box 75. Dishwashing Paste, 400g 2 Piece 76. Epson Ink #664 Magenta 2 Bot. 77. Epson Ink #664 Cyan 2 Bot. 78. Epson Ink #664 Yellow 2 Bot. 79. Epson Ink #664 Black 3 Bot. 80. Ethyl Alcohol 1 Gal 81. Photo Paper, 10’s Per Pack 1 Pack 82. Staple Wire 10mm, 1000pcs Per Box 1 Box 83. Vinyl Coated Clips #50, (100 Pcs Per Box ) 2 Box 84. Vinyl Coated Clips # 33, (100 Pcs Per Box ) 2 Box 85. Clear Tape/transparent Packing Tape (40mm/1¾’’) 1 Roll Menro 86. Bond Paper A4 Size, 80gsm 4 Ream 87. Bond Paper Long Size, 80gsm 4 Ream 88. Bond Paper Short Size, Us 2 Ream 89. Specialty Paper, Long Size Color Green 10’s 6 Pack 90. Chlorine 3 Gal. 91. Folder Long Green 2 Doz 92. Fastener Plastic 1 Box 93. Staple #35, Heavy Duty 1 Piece 94. Staple Wire #35 1 Box 95. Staple Wire #10 1 Box 96. Record Book 500pages 2 Piece 97. Sign Pen 0.3, Black 12’s Per Box 1 Box 98. Sign Pen 0.3, Blue 12’s Per Box 1 Box 99. Liquid Hand Sanitizer, 1000ml Per Bot 1 Bot 100. Dust Pan Metal 3 Piece 101. Hand Gloves, Construction Gloves/leather, Xl 24 Piece 102. Sanggot 3 Piece 103. Broom Soft Tambo 6 Piece 104. Rubber Boots Color Black, Size:39 (7 Pair) 40: (5 Pair) 41: (4 Pair) 42: ( 4 Pair) 43: (4 Apir) 24 Pair 105. Alcohol Ethyl 2 Gal 106. Empty Laminates Sacks, 50kg 300 Piece 107. Trapal Blue/black 30 Meter 108. Big Bolo Sturdy 6 Piece 109. Raincoat, Thick, Xl Size, Up And Down 12 Pair 110. Flower Pot, Color Brown Xl Size 60 Piece Mayor’s Office 111. Leather Work Boots For Men Size 7, Black 2 Pair 112. Leather Work Boots For Men Size 9, Black 2 Pair 113. Detergent Powder, 1 Kl Per Pack 5 Pack 114. Toilet Tissue Paper, 12 ‘s Per Pack 5 Pack 115. Deodorant Cake, 50g 10 Piece 116. Air Freshener, 500ml, Aerosol Type (wild Lavender) 5 Piece 117. Fabric Conditioner, 1 Liter Per Bot. 5 Bot 118. Trash Bag, Transparent /black, Large 10 Roll 119. Broom Soft Tambo 5 Piece 120. Doormat, Cloth Type 5 Piece 121. Mop Head, Made Of Rayon, 400grams 2 Piece 122. Staple Wire #35 2 Box 123. Correction Tape 20x5mm 15 Piece 124. Toilet Bowl Multi-purpose Cleaner, 1 Liter Per Bot 5 Bot 125. Record Book 500 Pages 5 Piece 126. Record Book, 300 Pages Size: 214mmx278mm 5 Piece 127. Car Freshener 70grams 10 Can 128. Facial Tissue 150sheets, 2 Ply 10 Box 129. Soap Liquid Hand Wash, 750ml Per Bot. 5 Bot 130. Alcohol, Ethyl 70% 5 Gal 131. Folder Long White, 100’s 2 Pack 132. Battery Dry Cell, Aa, 2 Pcs Per Blister Pack 2 Pack 133. Battery Dry Cell, Aaa, 3 Pcs Per Blister Pack 2 Pack 134. Sign Pen 0.7 Black, 12’s 1 Box 135. Epson Ink 664, Black 10 Bot. 136. Epson Ink 664, Cyan 10 Bot. 137. Epson Ink 664, Magenta 10 Bot. 138. Epson Ink 664, Yellow 10 Bot. 139. Ball Pen Black, 0.7. 12’s 3 Box 140. Toilet Brush With Long Handle, Plastic 2 Piece 141. Picture Frame 8.5x11 5 Piece 142. Certificate Holder 8.5x11 5 Piece 143. Bond Paper Long Size, 70gsm 20 Ream 144. Bond Paper, A4 Size, 70gsm 15 Ream 145. Balde And Kabo Set, ( Balde 12 L Capacity, Kabo Large Size) 5 Set 146. Tape Packaging, 48mm 2 Roll 147. Tape Transparent, 24mm 2 Roll 148. Tape Transparent, 48mm 2 Roll 149. Tape Double Sided, 12mm/4.5m 2 Roll 150. Furniture Cleaner, Aerosol Type, 300 Ml 3 Can 151. Data File Box, Made Of Chipboard, With Closed Ends Legal Size 3 Piece 152. Envelope Documentary, Legal Size 100’s 2 Box 153. Staple #35, Heavy Duty, Load Cap: 200 Staples 3 Piece 154. Specialty Paper, Yellow, 8.5x13, 10’s Per Pack 10 Pack 155. Specialty Paper, Sky Blue, 8.5x13, 10’s Per Pack 20 Pack 156. Specialty Paper, Pink, 8.5x13, 10’s Per Pack 20 Pack 157. Cotton Gloves With Orange Rubber Palm, Large 6 Pair 158. Sign Pen 0.3mm, Black, 12’s Per Box 1 Box 159. Sign Pen 0.3mm, Blue, 12’s Per Box 1 Box 160. Epson Ink #003, Black 10 Bot 161. Disinfectant Spray, Aerosol Type, 400-550 Grams 6 Can 162. Broom, Ting2 5 Piece 163. Scotch Beige Masking Tape 36mmx50m 5 Piece Gso 164. Paper Multipurpose Copy, 70gsm A4 Size 10 Ream 165. Correction Tape Film, 8mm 5 Piece 166. Data File Box Legal Size 3 Piece 167. Data File Box With Ring, Legal Size, Blue & Green 2 Piece 168. Fastener Plastic Long 2 Box 169. Fastener Metal 3 Box 170. Folder Long Brown 50 Piece 171. Permanent Marker, Fine, Color Black 3 Piece 172. Masking Tape 24mm 2 Piece 173. Masking Tape 48mm 2 Piece 174. Staple Wire #35 5 Box 175. Ball Pen Black, 0.5, 12’s Per Box 2 Box 176. Sign Pen 0.5 Black, 12’s Per Box 2 Box 177. Toilet Tissue Paper 12’s Per Pack 3 Pack 178. 70% Ethyl Alcohol 1 Gal. 179. Broom Soft Tambo 1 Piece Accounting Office 180. A4 Size Bond Paper 80gsm 15 Ream 181. Legal Size Bond Paper 80gsm 5 Ream 182. Spin Mop, Heavy Duty 1 Piece 183. Staple Wire #35 5 Box 184. Pencil #2, 12’s Per Box 2 Box 185. Sign Pen Color Green 0.8, 12’s Per Box 2 Box 186. Sign Pen Black, 0.8, 12’s Per Box 1 Box 187. Correction Tape Big 5 Piece 188. Sign Pen Blue, 0.8, 12’s Per Box 1 Box 189. Scissor Big 1 Piece 190. Staple #35, Heavy Duty 5 Piece 191. Calculator, 16 Digits 1 Piece 192. Packaging Tape 24mm 5 Piece 193. Ball Pen, 0.7, 12 ‘s Per Box 2 Box 194. Rubber Bond #18 2 Box 195. Paper Clip Jumbo 5 Box 196. Staple Remover Plier Type 1 Piece 197. Ruler Plastic 12’’ 10 Piece 198. Garbage Bin 26l Capacity 1 Unit 199. Soft Rubber Mat 2 Meter 200. Welcome Doormat, Standard Size 1 Piece Lydo 201. Bond Paper Legal Size, 80gsm 1 Ream 202. Bond Paper A4 Size, 80gsm 1 Ream 203. Folder Long White 100 Piece 204. Double File Box Long Size, Land Scape 5 Piece 205. Staple # 35, Heavy Duty 1 Piece 206. Staple Wire #35 5 Box 207. Sign Pen 0.5, Black, 12’s Per Box 1 Box 208. Paper Clip Small 5 Box 209. File Organizer, Steel, 3 Tier 2 Piece Kalahi 210. White Folder Long Size, 100’s 1 Ream 211. Bond Paper Legal Size, 80gsm 4 Ream 212. Bond Paper A4 Size, 80gsm 4 Ream 213. Sign Pen 0.5, Black, 12’s Per Box 1 Box 214. Correction Tape (21m) 12 Piece 215. Alcohol 70% 1 Gal 216. Toilet Tissue Paper, 12’s Per Pack 2 Pack 217. Permanent Marker, Broad, 12’s Per Box 1 Box 218. Tape Transparent 48mm 2 Piece 219. Epson Ink 003 Magenta 2 Piece 220. Epson Ink 003 Black 4 Piece 221. Epson Ink 003 Cyan 2 Piece 222. Epson Ink 003 Yellow 2 Piece 223. Empty Sacks, 50kls Capacity (used) 30 Piece 224. Walis Tambo 2 Piece 225. Dust Pan Plastic 1 Piece Mao 226. Alcohol Ethyl, 70%, Scented, 500ml 1 Bot. 227. Stamp Pad Ink, Purple Or Violet, 50ml 1 Bot. 228. Paper Multicopy, 80gsm Size: 216mmx330mm 10 Ream 229. Paper Multipurpose (copy) A4, 70gsm 10 Ream 230. Epson Ink 003 1 Set 231. Epson Ink 664 1 Set 232. Epson 003 Black 2 Piece 233. Staple Wire, (23/13) 1 Box 234. Broom Soft Tambo 1 Piece 235. Broom Ting2 1 Piece 236. Binder Clips, All Metal Clamping: 51mm (2’’) 5 Box 237. Correction Tape, Film Base, 6m Min. 10 Piece 238. Envelope Documentary, A4 Size, 100’s 1 Box 239. Envelope Documentary, Legal Size, 100’s 1 Box 240. Pencil Lead, With Eraser, Wood Case, Hardness, Hb, 12’s Per Box 1 Box 241. Staple #35, Heavy Duty 1 Piece 242. Calculator, Compact , 12 Digits 1 Unit 243. Pencil Sharpener, Heavy Duty, 2 Hole 1 Piece 244. Sign Pen Black 0.5, 12’s Per Box 1 Box 245. Cartolina Color Green 4 Piece 246. Transparent Tape, 48mm 1 Roll 247. Folder L Type (plastic A4 Size) 100’s 1 Pack 248. Folder L Type (plastic Long Size) 100’s 1 Pack 249. Push Pin Flat Head 1 Box 250. Doormat, Cloth Type, Regular Size 1 Piece 251. Dish Drainer, 2 Layer 1 Unit 252. Binder Clip 32mm 2 Box 253. File Organizer Legal, 8.5x13 (data File Box) 10 Piece Wasstu 254. Bond Paper, A4 Size 80gsm 8 Ream 255. Bond Paper, Long Size 80gsm 8 Ream 256. Scissor Heavy Duty, Stainless For Cutting Papers, Regular Size 3 Piece 257. Puncher With 2 Hole Guide, Heavy Duty 2 Piece 258. Correction Tape 20m Large 12 Piece 259. Toilet Tissue Paper, 12’s 1 Pack 260. Scotch Tape 1 Inch 6 Roll 261. Permanent Marker Black, Fine 3 Piece 262. Highlighter Pen, Any Color 6 Piece 263. Data File Box, Long Size 6 Piece 264. Rubber Bond, #18 1 Box 265. Staple Remover, Plier Type, Heavy Duty 2 Piece 266. Staple #35, Heavy Duty 3 Piece 267. Staple Wire, #35 6 Box 268. Record Book 500 Pages (big) 6 Piece 269. Record Book 200 Pages (small) 6 Piece 270. Calculator 12 Digits 1 Piece 271. Epson Ink 003, Black 3 Piece 272. Binder Clip 2 Inch, Or Paper Clamp (black) 12’s 1 Box 273. Binder Clip 1 Inch Or Paper Clamp (black) 12’s 1 Box Vm/sb Office 274. Stamp Pad Ink, Purple Or Violet, 50ml 1 Bot 275. Alcohol, Ethyl 70&, Scented, 500ml 8 Bot 276. Paper, Multicopy, 80gsm, Size: 210mm X 297mm 10 Ream 277. Paper, Multicopy, 80gsm, Size: 216mm X 330mm 15 Ream 278. Toilet Tissue Paper, 12’s Per Pack 4 Pack 279. Trash Bag, Plastic, Transparent Xl Size 5 Roll 280. Sign Pen Black, Liquid Gel, 0.5mm Needle Tip 12 Piece 281. Sign Pen Blue, Liquid Gel, 0.5mm Needle Tip 12 Piece 282. Ball Pen Black 24 Piece 283. Ball Pen Blue 24 Piece 284. Air Freshener, Aerosol Type, 280ml/150g 5 Can 285. Disinfectant Spray, Aerosol Type, 400-500 Grams 4 Can 286. Data File Box, Made Of Chipboard, With Closed Ends Legal Size 5 Piece 287. Data Folder, Made Of Chipboard Taglia Lock Legal Size 5 Piece 288. Stamp Pad, Felt, Bed Dimension 60mm X 100mm Min 2 Piece 289. Stapler # 35, Load Cap: 200 Staples 5 Piece 290. Record Book, 500 Pages Size: 214mm 278mm Min 10 Piece Meeudo Gym 291. Furniture Polish 255ml 5 Piece 292. Chlorine Powder, 1 Kg Per Pack 10 Pack 293. Detergent Powder, 1 Kg Per Pack 30 Pack 294. Sodium Hypochlorite 20 Gal. 295. Handwashing Soap 60g 25 Piece 296. Walis Ting2 5 Piece 297. Walis Tambo 5 Piece 298. Toilet Brush, Plastic Handle 5 Piece 299. Floor Brush, With Long Handle 5 Piece 300. Cleaning Mop With Plastic Handle 3 Piece 301. Fabric Conditioner, 1 Liter Per Bot. 5 Bot. 302. Disinfectant Spray, 255ml 5 Piece 303. Dishwashing Liquid Soap, 250ml Per Bot. 4 Bot. Dilg 304. Bond Paper A4 Size, 80gsm 3 Ream 305. Bond Paper Long Size, 80gsm 3 Ream 306. Ball Pen Black 0.5, 12’s 1 Box 307. Metal Fastener 1 Box 308. Folder Long Us 1 Doz. 309. Epson Ink #003 Cyan 1 Bot 310. Epson Ink #003 Black 1 Bot 311. Epson Ink #003 Magenta 1 Bot 312. Epson Ink #003 Yellow 1 Bot 313. Paper Clip Jumbo, 1 Box 314. Correction Tape Big 6 Piece 315. Alcohol 500ml, 70% Solution 3 Bot. Mpdc (cbms) 316. Paper Multi-purpose, A4 Size 80gsm 15 Ream 317. Paper Multi-purpose, Legal Size 80gsm 10 Ream 318. A3 Paper Size 1 Ream 319. Metal Ruler (sample Picture Attached) 1 Piece 320. Stainless Steel Utility Knife ( Sample Pic Attached) 1 Piece 321. Waxed Line Thread (2 Ply) Color Black & Dark Brown 2 Piece 322. Waxed Line Thread (4 Ply) Brown & Dark Orange 2 Piece 323. Book Cloth 56’’ Per Roll/yard Color Light Blue, Light Green, White, Red, Yellow 5 Roll 324. Needles Set (30 Assorted Needles) 1 Set 325. Paint Brush #3 2 Piece 326. Paint Brush #2 2 Piece 327. Book Board A3 Size, 12’s 1 Ream 328. Book Board A4 Size, 12’s 1 Ream 329. Book Board Legal Size, 12’s 1 Ream Mpdc Office 330. Paper, Multi-purpose (copy) A4 Size, 80gsm 3 Ream 331. Toilet Tissue Paper, 12’s Per Pack 1 Pack 332. Paper Clip, Vinyl/plastic Coat, 50mm 1 Box 333. Folder Long White 12 Piece 334. Sticker Paper, A4 Size, Plain White, 10’s 2 Pack 335. Photo Paper, A4 G/m² 2 Pack 336. Alcohol, 70% Ethyl, 500ml Per Bot 3 Bot 337. Ball Pen Black, 0.5 1 Doz 338. Broom Soft Tambo 2 Piece 339. Broom Ting² 2 Piece 340. Rags, Cloth Type, Regular Size 3 Piece 341. Detergent Powder, 1kg Per Pack 1 Pack 342. Trash Bag, Plastic Transparent, Xl 1 Roll 343. Wastebasket, Non-rigid, Foot Operated, 30liters Cap. 3 Piece 344. Record Book, 500 Pages 1 Piece 345. Mop Bucket, Heavy Duty, Hard Plastic 1 Unit 346. Correction Tape, Big 6 Piece 347. Dishwashing Paste, 200 Grams 1 Piece 348. Pvc Pvc Healing Cutting Mat (steel) Sample Pic Attached 1 Unit 349. Feather Duster, Big 1 Piece 350. Empty Sacks, 50kgs Cap. Brand New 6 Piece Rhu 351. Isopropyl Alcohol 70% 10 Gal. 352. Disinfectant Solution 5 Gal. 353. Disinfectant Spray 510grams 10 Piece 354. Detergent Bar 380grams 20 Bar 355. Detergent Powder 700 Grams Per Pack 20 Pack 356. Liquid Hand Soap 1 Liter Per Bot. 5 Bot 357. Heavy Duty Floor Brush W/ Long Handle (wood) 2 Piece Rhu (phic E-konsulta) 358. Epson Ink 664 Black 20 Piece 359. Epson Ink 664, Magenta, Yellow, Cyan 10 Set 360. Epson Ink 003 20 Piece 361. Brother Ink Btd60 Black 10 Piece 362. Brother Ink Bt5000, Magenta, Yellow, Cyan 10 Set 363. Bond Paper Long Size 70gsm 100 Ream 364. Bond Paper A4 Size 70gsm 100 Ream 365. Expanded Envelope Glossy, With Sting, Long Size, (any Color) 450 Piece 366. Specialty Paper A4, 180gsm, Cream Color, 10’s 100 Pack 367. Data File Box, Made Of Chipboard, Long Size 5 Piece 368. Ball Pen Black 0.5, 12’s Per Box 20 Box 369. Ball Pen Red 0.5, 12’s Per Box 10 Box 370. Ball Pen Blue 0.5, 12’s Per Box 10 Box

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman

Details: The Martinsburg Va Medical Center Is Conducting This Sources Sought To Identify Contractors Who Possess Capabilities To Provide The Services Described In The Statement Of Work Below. as Permitted By The Far Part 10, This Is A Market Research Tool Being Utilized For The Informational And Planning Purposes. Your Responses Will Assist The Government In The Development Of Its Acquisition Strategy. response Is Strictly Voluntary It Is Not Mandatory To Submit A Response To This Notice To Participate In Formal Rfq Process That May Take Place In The Future. However, It Should Be Noted That Information Gathered Through This Notice May Significantly Influence Our Acquisition Strategy. All Interested Parties Will Be Required To Respond Separately To Any Solicitation Posted As A Result Of This Sources Sought Notice. respondents Will Not Be Notified Of The Results Of The Evaluation. We Appreciate Your Interest And Thank You In Advance For Responding To The Sources Sought. this Service Will Be Implemented Using The North American Industry Classification System (naics) Code 485999. if A Small Business Is Interested In This Procurement, They Must Provide At Least 51 Percent Of The Services Rendered. notes all Capability Statements/responses To This Sources Sought Notice Shall Be Submitted Via Email Only To Tracy.dotson@va.gov. Telephone, Fax, Or Any Other Form Of Communication Inquiries Will Not Be Reviewed Or Accepted. Responses To This Sources Sought Notice Must Be Received No Later Than January 22, 2025 At 3:00 P.m. (eastern Standard Time). This Sources Sought Notice May Or May Not Assist The Va In Determining Sources Only. A Solicitation Is Not Currently Available. If A Solicitation Is Issued, It May Or May Not Be Announced At A Later Date, And All Interested Parties Shall Respond To That Solicitation Announcement Separately From The Responses To This Sources Sought Notice. disclaimer this Rfi Is Issued For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked A Proprietary Will Be Handled Accordingly In Accordance With (iaw) Federal Acquisition Regulation (far) 15.201(e), Rfis May Be Used When The Government Does Not Presently Intend To Award A Contract, But Wants To Obtain Price, Delivery, Other Market Information, Or Capabilities For Planning Purposes. Responses To These Notices Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Incurred Associated With Responding To This Rfi. interested & Capable Responses nco 5 Is Seeking Responses From Businesses That Are Interested In This Procurement And Consider Themselves To Have The Resources, Rights, And Capabilities Necessary To Provide These Services. Please Respond With Your: business Name (including Unique Entity Id (sam.gov), Business Type, Socio-economic Status (e.g., Veteran-owned, Woman-owned, Disadvantaged Small Business, 8(a), Etc.), Person Of Contact (including Telephone Number & Email Address). capability Statement gsa Contract Number, If Applicable, To Include Naics brief Summary Of Categories Of Professional Services That Your Company Can Provide. applicable Certification(s)/licenses performance Work Statement (pws) general Procedure: the Contractor Shall Be Required To Furnish All Necessary And Appropriate Labor, Supervision, Materials, Equipment, And Supplies To Provide Valet Parking Services In Accordance With The Terms And Conditions Of The Resulting Contract And The Specifications And Requirements, As Specified Herein. The Contractor Shall Provide Valet Parking Services To Alleviate Parking Problems Experienced At The Martinsburg Vamc. The Valet Parking Services Shall Be Intended To Accommodate Veteran Patients, Their Family Members, And Visitors. The Contractor Shall Be Required To: staffing: The Contractor Will Provide Adequate Staffing Of Customer Service Attendant(s) For The Hours Of Operation Specified. The Contractor Will Always Provide Adequate On-site Supervision To Handle Customer Concerns And Parking Incidents. The Contractor Does All Recruiting, Hiring, Training, And Supervising. contractor Should Base Their Plan On The Martinsburg Vamc Serving Approximately 100 Vehicles Per Day. provide Va Approved Valet Claim Checks, Securing Keys, Parking Vehicles, Delivering Vehicles, And Directing Certain Valet Vehicles To And From The Valet Greeting Area. provide Professional Valet Booth(s), Locking Key Cabinet(s), Safety Cones, Signs, Roadblocks And Other Supplies And Materials And/or Miscellaneous Items Necessary To Operate And Manage Valet Services. All Signs Shall Be At Least 30 X 30 . Hand-written Signs Shall Not Be Allowed. blocking Of Any Roadway Or Re-routing Of Traffic Must First Be Approved By The Martinsburg Va Police Department. the Contractor Will Provide Va Approved Walkie-talkies Or Radios For The Valet Staff To Communicate With Each Other While Conducting Their Normal Duties Of Valet Parking. contractor Will Provide And Install A Minimum Of 2 "no Tipping" Signs. Signs Must Be A Minimum Of 30 X30 . The No Tipping Policy Shall Be Strictly Enforced. Valet Parking Attendants And All Other Parking Staff Shall Be Restricted From Accepting Tips Of Any Kind. contractor Will Provide And Install A Minimum Of 2 Insurance Liability Signs For Vehicle Damage Claims. Signs Must Be A Minimum Of 30 X30 . provide Experienced, Fully Trained, And Professional Valet Parking Attendants To Perform The Valet Parking Services. constantly Assess Va Parking Situation Taking Into Consideration All Parking Spaces Available To Adjust The Level Of Parking Service And Personnel Required To Perform Under The Contract Without Exceeding The Required Wait Time To Valet Parked And Retrieved Vehicles. provide Parking And Traffic Control Recommendations As Deemed Appropriate And Necessary To Provide Quality Services. location: martinsburg, Wv Va Medical Center: 510 Butler Ave, Martinsburg, Wv 25405 period Of Performance: base Period (year) + 4 Option Periods (year). site Inspection: a Pre-proposal Site Inspection / Walk-through For All Interested Contractors Will Be Scheduled By The Contracting Officer For Any Interested Contractors. All Interested Contractors Are Encouraged To Attend The Site Inspection And Walk-through Of The Martinsburg Va Facility. Only One Walk-through For This Solicitation Shall Be Conducted. The Intent Of The Site Inspection Is To Give All Interested Contractors An Opportunity To Get Familiar With The Parking Lots Designated To Be Used For The Valet Parking. note: The Contractor Shall Be Responsible For All Costs And Travel Expenses Associated With The Site Inspection Visit. While Not Mandatory, Failure To Attend The Site Inspection Walk-through Of The Martinsburg Va Facility Shall Not Release The Contractor From Complying With The Terms, Conditions, Specifications, And Requirements Of The Resulting Contract. designated Valet Parking Lots: the Martinsburg Vamc Will Designate Parking Lots To Be Used For The Valet Parking Services. the Contractor Shall Have Complete Control Of Vehicles Parked In Designated Valet Parking Area(s) In The Context Of Maximizing The Space Available And Facilitating A Smooth Operation. The Martinsburg Vapd Will Always Maintain Authority Over All Vehicles And Parking At The Facility. If Deemed Necessary By The Martinsburg Vamc, The Contractor Shall Be Required To Double Stack Vehicles To Maximize The Space Available. The Contractor Shall Be Responsible For Parking Control And Monitoring The Designated Parking Lots Assigned For The Valet Operation. contractor Responsibilities: the Contractor Shall Provide Consistent, Responsive, Secure, And Efficient Valet Parking Operations. The Contractor Shall Be Responsible For Providing Patrons With A Valet Claim Check/ticket, Securing Keys, Parking, Delivering, And Directing Certain Valet Vehicles To And From The Valet Drop Off And Pick Up Area. The Martinsburg Vamc Will, At Their Discretion, Provide The Contractor With Instructions On Addressing The Issue Of Who Qualifies For Valet Parking Services And The Method Of Identifying Such Individuals. Such Instructions May Include Verbiage Such As Vehicles Requiring Valet Parking Shall Be Stopped By The Valet Parking Attendants, Who Shall Be Required To Ask The Patients Or Drivers For An Appointment Letter, Va Patient Identification Card, Clinic Or Healthcare Service Which Will Be Visited And The Estimated Time Of Departure. Valet Parking Attendants Shall Also Be Required To Ask Visitors The Name Of The Inpatient Veteran, Name Of Event Attending Or The Name Of The Va Staff That Will Be Visited And Their Estimated Time Of Departure. The Exact Procedures Will Be Provided To The Contractor By The Cor Covered In This Statement Of Work. The Contractor Shall Be Responsible For Screening Out Vendors And Employees, Except Those With Handicapped Placards Or License Plates, From Inappropriately Using The Valet Parking Services At The Martinsburg Vamc. All Vehicles Parked By The Parking Attendants Shall Be Locked And Secured. Driver S Keys Shall Be Secured At The Valet Booth(s). A Claim Check Shall Be Issued To The Driver Using The Valet Service. Claim Checks Shall Contain The Valet Company S Liability Disclaimer And Contact Information. Contractor Shall Be Responsible For Directing Vehicles Not Wishing To Participate In The Valet Parking Services To Other Designated Parking Locations. Contractor Shall Designate A Full-time Supervisor To Be On Site During Set-up, Tear-down Operations, And Performance Of The Work. The Contractor Shall Always Provide Adequate On-site Supervision To Handle Customer Concerns And Parking Incidents. Duties Of The Supervisor Shall Also Include But Not Be Limited To Customer Relations, Training, And Improving All Valet Services And Coordinating All Work And Additional Services With The Contracting Officer S Representative (cor). Contractor Shall Coordinate With The Cor To Designate Front Drop Off And Pick Up Area(s) Near The Entrance For Loading And Unloading Of Handicapped Patients/patrons So As Not To Interfere With Normal Valet Parking Operation. Handicapped Patients/patrons Shall Be Permitted To Pull To The Designated Drop Off And Pick Up Area(s) Near The Entrance. The Parking Attendants Shall Then Be Required To Park The Vehicles Or Direct The Drivers To A Handicap Space For Self-parking. Patients With Handicap Placards Or License Plates On Their Vehicles Shall Be Given The Option Of Self-parking In Handicapped Slots Or Valet Parking. Non-handicapped Employees Shall Be Directed To Self-park. patient Assistance: the Service Shall Include Assisting Patients And Their Families Who Request Front Door Service, Assisting With Wheelchairs And Other Devices In And Out Of Cars, And Parking Of Automobiles To Include Vehicles With Adaptive Equipment. To Reduce The Risk Of Injuries To Valets And Potentially To The Veterans Using Valet Services, Valets Will Be Responsible For Following The Martinsburg Vamc S Practices For Safe Patient Handling And Mobility (sphm) Program. The Contractor Shall Deliver These Wheelchairs Upon Patient Or Caretaker Request To The Patient To Facilitate Patient Travel From The Drop Off Area To The Volunteer Desk At The Hospital Entrance, If Requested. The Contractor Will Not Escort Patients Within The Hospital/facility. All Wheelchairs Used Will Be Noted On The Contractor Ticket For Accountability. Parking Patrons Shall Be Always Treated Courteously And With Respect. Parking Attendants Shall Drive Slowly And Cautiously, Paying Attention To Pedestrian Traffic. training/licenses/qualifications: the Contractor Shall Provide Bonded, Fully Trained, Experienced Parking Attendants Who Possess A Valid State Driver S License, Be U.s. Citizens And Be Fluent In The English Language. Contractor Personnel Shall Be At Least 18 Years Of Age, Have No Criminal History, And Be Able To Perform All General Duties, Functions, And Activities As Required. Contractor S Staff Qualifications Shall Also Include Expertise In The Proper Operation Of All Types Of Motor Vehicles, And A Commitment To The Highest Level Of Respect, Courtesy, Compassion, And Safety. The Contractor Shall Furnish At Its Cost, Evidence Of Qualifications And Competency Assessment Of All Employees. Such Evidence Shall Include But Are Not Limited To Copies Of Driver S Licenses, Dmv Printouts, And Copies Of Security Background Checks. To Be Eligible To Perform Under This Contract, Each Contract Employee Must Satisfactorily Complete Va Talent Management System (tms) Web Base Training. Effective March 23, 2012, All Contractors Are Required To Begin Using Tms For Their Mandatory Training, Utilizing The Create New Feature At Contract Employees Will Self-enroll Into Tms And Select The Following Courses. Training Is To Be Accomplished Outside Of Contract Duty Hours. Tms Courses Will Require Completion Annually. The Contractor Shall Be Responsible For Providing A Facility Orientation To All Valet Parking Attendants And Offer A Training Program That A Minimum Will Include The Following: security patient Privacy safety emergency Procedures accidents / Injuries communication (with Contractor Staff /martinsburg Vamc). the Contractor Shall Maintain Documentation Certifying That All Employees Assigned To The Contract Have Received The Training. If Deemed Necessary By The Government, Additional Training Shall Be Offered At The Martinsburg Vamc And Scheduled At The Post Award Meeting On A Mutually Agreeable Date And/or Coordinate With The Cor. In Addition To Safe Driver Training, The Minimum Customer Service Training Must Be Provided And Documented For Each Employee. the Importance Of A Positive Attitude verbal Communication Methods That Are Courteous And Informative non-verbal Communication appearance volume And Tone face To Face Contact self-evaluation violence In The Workplace contractor Employees Must Know Basic Directions For Destinations In The Hospital And Around The Community. Contractor Employees Must Keep The Work Area Clean And Always Appear Ready For Work, Even When No Customers Are Present. uniforms: the Contractor S Uniform Should Be Prior Approved By The Cor Before Initial Commencement Of Work. The Selected Uniform Will Be Standard For All Employees. At No Time Will Any Contract Employee Wear Their Own Jacket, Shirt, Pants, Coat, Gloves, Or Head Gear. All Cold Weather/rain Gear Will Be Supplied By The Contract Company. Uniforms Shall Facilitate Easy Identification Of Contractor Employees By Employee Name And Company Name. Uniforms Shall Be Always Worn During Performance Of Contract Duties. Uniforms Will Be Neat In Appearance. Shirts And Pants Will Be Ironed Or Pressed. The Cor Can Request A Contractor To Be Sent Home If Their Uniform Is Not Presentable. The Contractor Will Replace Any Worn-out Or Torn Uniform At No Cost To The Government Or Employee. Approved Uniforms And Related Accessories, Listed Below, Do Not Have To Be New But Must Be In Good Condition: Shirt, Button Up, Long Sleeve (cold Weather Days) Shirt, Button, Up Short Sleeve trouser, All-season Weight jacket, Winter, Heavyweight Artic Field Coat jacket, Lightweight trench Raincoat winter Gloves, (pair), (color To Match Accessories) hat With Company Logo Or Valet Written On Face, (color To Match Accessories) earmuffs Or, (color To Match Accessories) the Outermost Article Of Clothing Being Worn By The Valet Staff Above The Waist Shall Have, In Whole Or In Part, Reflective Material To Improve Worker Visibility To Alert Drivers Of The Valet S Presence When Walking Through The Lots. The Reflective Gear Shall At A Minimum Meet Ansi 107-2015 Type R, Class 2 Requirements. claims/damage: the Contractor Shall Be Completely Liable For All Vehicle Damages Occurred While At The Possession Of The Valet Staff And/or Service. All Vehicle Damage Claims Brought To The Attention Of The Valet Contractor Shall Be Immediately Investigated And Validated Claims Shall Be Processed For Settlement. any Claims Of Damage Or Missing/stolen Property Involving Patient/customer S Vehicles Shall Be The Responsibility Of The Contractor. The Va Assumes No Responsibility For Such Claims. All Claims Shall Be Directed To And Handled By The Contractor Supervisor Who Shall Immediately Notify The Cor And The Va Police Department (vapd). Corrective Actions To Resolve All Claims Shall Commence Immediately. All Claims Shall Be Settled Within Fourteen (14) Working Days Unless Extenuating Circumstances Warrant Additional Time And Is Authorized By The Contracting Officer. All Vehicle Accidents Or Theft Claims Should Be Immediately Reported To The Va Police For Investigation. martinsburg Vamc Hours Of Operation: proposed Hours Of Operation Are 6:30 Am To 5:00 Pm Monday Through Friday For The Martinsburg Vamc, Excluding Federal Holidays. The Cor Will Notify The Contractor If Valet Will Be Operating On Other Days Specifically Declared By The President Of The United States To Be A Federal Holiday. The Contractor Shall Adjust The Level Of Valet Parking Staff As Necessary To Ensure An Efficient Operation. If Deemed Necessary By The Government, The Hours Of Operation May Be Periodically Adjusted Based Upon Volume And Demand. The Medical Center Does Not Routinely Close For Adverse Weather Conditions. When The Medical Center Remains Open During Adverse Weather Events It Is Expected Sufficient Staff Will Be On Site To Operate The Valet Service. At 5:00 Pm, The Parking Attendants Shall Turn Over All Remaining Keys And Associated Tickets To The Aod. A Log Will Be Completed For All Remaining Keys Turned Over To The Aod. The Log Will Include The Ticket Number, Vehicle Make And Model, Registration Number, Valet Attendant S Name That Tuned Keys Over To The Aod, And The Aod S Name With Signature That Took Responsibility Of The Keys. The Aod Will Then Lock Up The Keys In The Aod S Safe. federal Holidays: listed Below Are The Eleven Federal Holidays: No Work Will Be Performed On These Days. new Year S Day january 1 martin Luther King S Birthday third Monday In January president S Day third Monday In February memorial Day last Monday In May juneteenth june 19 independence Day july 4 labor Day first Monday In September columbus Day second Monday In October veterans Day november 11 thanksgiving Day fourth Thursday In November christmas Day december 25 special Events: the Contractor Shall Be Notified In Advance Of Any Special Events Which Might Cause Parking Problems Because Of Additional Patients, Patrons, Or Visitors To The Medical Center. Contractors Shall Be Required To Adjust The Level Of Parking Staff To Accommodate The Workload Or Extra Vehicle Volume. proposed Plan: after Notification Of Contract Award, The Contractor Shall Have Forty-five (45) Calendar Days For Full Operational Implementation. This Must Include Finalizing Staff Requirements, Including Government-administered Background Investigations, Etc. The Contractor Shall Be Required To Implement Their Proposed Valet Parking Service Plan And Perform On A Day-to-day Basis For The Duration Of The Contract. ordering Activity: the Contractor Shall Not Accept Any Instructions Issued By Any Person Other Than The Contracting Officer Or Delegated Government Representative Such As The Cor Who Is Acting Within The Limits Of His/her Authority. quality Assurance: the Contractor Shall Be Responsible For Complying With All Appropriate Regulations And Guidelines Of The Occupational Safety And Department Of Transportation, And/or Any Other Pertinent Federal, State, And Local Policies Relating To The Herein Mentioned Work Or Valet Parking Services. The Contractor Shall Always Provide Adequate On-site Supervision To Achieve Quality Assurance And To Handle All Customer Concerns And Parking Incidents. All Tasks Accomplished By The Contractor Personnel Shall Be Performed To Preclude Damage Or Defacement To Vehicles Or Government-owned Furnishings, Fixtures, Equipment, And Facilities. The Contractor Shall Report Any Damage Observed Or Caused By The Contractor Personnel To The Cor. The Contractor Shall Be Responsible For The Replacement Of Items Or To Repair Vehicles Or Facilities To Previous Condition If The Contractor Is Determined To Be At Fault For The Damage. Complaints: the Contractor Shall Promptly And Courteously Respond To Complaints Within 10 Working Days, Including Complaints Brought To The Contractor S Attention By The Contracting Officer Acting As The Quality Assurance Evaluator (qae). The Contractor Shall Maintain A Written Record Of All Complaints, Both Written And Oral Showing The Identity Of The Individual, The Nature Of The Complaint, And The Contractor S Response. The Contractor Shall Permit The Government To Inspect Such Records Upon Request. reports: the Contractor Shall Establish A Method To Validate The Number Of Vehicles Parked Per Day (i.e., Parking Stubs) And Submit A Monthly Report To The Contracting Officer And Cor Within Seven (7) Calendar Days After Each Month Ends. The Report Shall Summarize The Number Of Vehicles Parked By Valet Attendants Based On Date And Time (sorted By Morning Or Afternoon). The Report Shall Also Identify The Peak Hours During The Day And How Many Vehicles Were Parked During Those Peak Hours. The Report Shall Also Include Any Incidents, Accidents Or Special Situations With Patients, Visitors, Va Employees, Or Va Volunteers. The Reports Must Be Legible And Easy To Understand. Reports Should Be Signed By The Supervisor And/or Authorized Representative Of The Contractor. Contractor May Provide For Approval A Sample Of The Types Of Report Forms Used On Similar Projects. disruptive Behavior: the Contractor Shall Always Provide Adequate Onsite Supervision To Handle Disruptive Behavior Of Any Parking Attendant Performing Under The Contract. The Contractor Agrees To Permanently Remove Any Member Of Its Parking Staff From Performing Work Associated With This Contract, At The Sole Discretion Of The Va. Any Legal Misconduct Or Violations Will Be Subject To Governing Security, Law Enforcement, And Standards Of Conduct On Veterans Affairs Property, 38 Cfr 1.218. examples Of Misconduct Include: neglect Of Duty, Including Sleeping While On Duty, Unreasonable Delays, Or Failure To Carry Out Assigned Tasks, Conducting Personal Affairs During Official Time, Lack Of Or Limited Productive Service And Refusing To Render Assistance Or Cooperate In Upholding The Integrity Of The Valet Program At The Worksite. disorderly Conduct, Use Of Abusive Or Offensive Language, Quarreling, Rude Inappropriate Comments, Sexual Harassment, Intimidation By Words Or Actions, Or Fighting. Also, Participation In Disruptive Activities Which Interfere With The Normal And Efficient Operations Of The Government. Theft, Vandalism, Immoral Conduct, Or Any Other Criminal Act. selling, Consuming Or Being Under The Influence Of Intoxicants, Drugs, Or Substances Which Produce Similar Effects. involvement In Commercial Activities At Any Time While On Government Controlled Property (included Soliciting Sale, Donation, Etc., From Employees, Patients, Or Others). Improper Use Of Official Authority Or Credentials. unauthorized Use Of Communications Equipment Or Government Property (includes Unauthorized Or Personal Use Of Internet, Long Distance Telephone Services Or Government Computer Network). Possession Or Misuse Of Weapons(s). Receiving Gifts Or Tips From Va Employees, Veterans, Or Their Family Members. the Contracting Officer, In Conjunction With Cor Will Make All Determinations Regarding The Removal Of A Person(s) From The Work Site(s). In The Event Of A Dispute, The Contracting Officer Will Make Final Determination. Specific Reasons For Removal Of An Employee(s) Will Be Provided In Writing To The Contractor. buses Or Large Vehicle: patients Driving Buses Or Large Motor Vehicles Shall Be Directed To Self-park Their Vehicles In The Parking Areas Designated By Va Police. changes To Parking Lots: no Alterations To The Parking Lots Shall Be Permitted. government Responsibilities: the Participating Va Medical Center Shall Provide Orientation And Training On Va Policies And Procedures Relating To Security, Patient Privacy, Safety, Emergency Procedures, Accidents/injuries, And Communication With Va Staff. The Required Training Shall Be Scheduled At A Post Award Meeting On A Mutually Agreeable Date And Coordinated With The Cor. contractor Submittals / Insurance Requirements: contractor Shall Be Required To Provide Copies Of The Following: automobile Liability Insurance For Bodily Injury And Property Damage On All Vehicles Used In The Performance Of This Contract. Policies Covering Automobiles Operated In The United States Shall Provide Coverage Of At Least $200,000 Per Person And $500,000 Per Occurrence For Bodily Injury And $20,000 Per Occurrence For Property Damage. the Contractor Shall Assume Full Responsibility For All Contracted Employees And Maintain At The Minimum Liability Insurance. Proof Will Be Required, And Spot Checked Randomly Per Employee. background Screening: in Accordance With Vha Directive 0710 All Contractor Personnel Providing Services Under This Contract Shall Be The Subject To A Background Screening And Must Receive Favorable Adjudication From The Va Prior To Contract Performance. The Level Of Screening For This Contract Is: Special Agency Check (sac). Any Employee Whose Background Investigation Yields Unfavorable Results Shall Be Removed Immediately From Performance Under This Contract. In The Event The Screening Is Not Completed Prior To Contract Performance, The Contractor Shall Be Responsible For The Actions Of Those Individuals Performing Under The Contract. contractor Personnel Security Requirements: all Contractor Employee S Will Be Issued A Government Piv Card (id Card). The Piv Card Must Be Always Worn While On Va Property. The Piv Card Must Be Worn Above The Waist And Clearly Visible. The Contractor Shall Be Required To Coordinate With The Cor To Obtain The Va Provided Piv Cards For All Valet Parking Staff. All Va Provided Piv Cards Shall Be Returned If The Contractor Employee Leaves The Employment Of The Contractor, At The End Of The Contract Or Upon Completion Of Service. the C&a Requirements Do Not Apply, And That A Security Accreditation Is Not Required. drug/alcohol Policy: contractor Shall Ensure That All Valet Parking Staff Performing Under This Contract Complied With The Martinsburg Vamc Alcohol And Drug Free Workplace Policy. The Contractor Shall Be Expected To Conduct Random Alcohol And Drug Tests On All Valet Parking Staff. Random Alcohol And Drug Tests Shall Be Conducted At Least Once A Year On Each Employee. Proof Of Drug Screen Shall Be Submitted To The Cor And Will Be The Responsibility Of The Contractor To Cover The Cost. Valet Parking Staff Shall Also Be Subject To Drug And Alcohol Testing When Reasons Exist To Suspect The Use Of Illegal Drugs And/or Alcohol While On Duty That Impaired Judgment, Performance, Operation Of Vehicles And The Safety Of Veteran Patients, Va Employees, Visitors, Voluntaries And/or Other Valet Parking Staff. Upon Request, The Contractor Shall Be Expected To Provide Evidence Or Copy Of The Results Of Employee Drug And Alcohol Testing. This Shall Also Be At The Expense Of The Contractor. smoking Policy: vamc Martinsburg Is A Smoke/vape Free Campus. Smoking Or Vaping Is Not Permitted Within Or Around The Va Facility Grounds. cell Phone: cell Phone Use Shall Not Be Permitted While Parking Vehicles. performance Standards Summary: performance Standards Define Desired Services. The Government Performs Surveillance To Determine If The Contractor Exceeds, Meets, Or Does Not Meet These Standards. performance Objective acceptable Quality Level (aql) method Of Surveillance incentive/disincentive contractor Shall Perform All Of The Requirements In Accordance With Sow Section General Procedures -valet 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Patient Assists 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Training 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Uniforms 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow: Reporting Requirements 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Claims For Damages 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. place Of Performance martinsburg Va Medical Center 510 Butler Ave martinsburg, Wv 25405