Car Tenders

Details: The purpose of the consultation is to provide accommodation for trainees and trainers in long training courses (+ 2 days) at the Cvrh of Clermont-Ferrand and Arras-Valenciennes (Valenciennes site), which the Cvrh are responsible for. #x0d; The accommodation service includes: - Accommodation that will be provided in individual studios with bathrooms, individual toilets and equipped with a kitchen and dining area, with a surface area of at least 18 m²; - Breakfast will be served in a common room or equivalent from 7 a.m. Once or twice a year, the training will require breakfast to open at 6 a.m.; - Accommodation must be available for the requested capacity on the set dates. The final calendar will be communicated in advance. For information purposes, the provisional schedule with quantities is attached to the consultation documents; - The accommodation will be located near the SNCF train station and the CVRH within a reasonable radius of 30 minutes by public transport; - A car park (above ground or underground) will be made available to trainees and trainers per week. The CVRH will specify the number of parking spaces to be reserved at the stage of issuing the purchase order.

Details: The primary school in the municipality of Wandlitz is located on the site by the sports hall. Due to the increasing number of pupils, the municipality of Wandlitz is planning a new building to expand the existing primary school (EGW for short). The 3-storey extension complements the existing primary school on the south-west side of the building. The new building comprises a total of 23 classrooms including ancillary rooms, an administration area and a cafeteria kitchen with a large dining room on the ground floor. The building plot is on the school grounds of the Wandlitz primary school. The property is owned by the municipality of Wandlitz. The site of the Wandlitz primary school is on Prenzlauer Chaussee. The extension will be built along the south-eastern property boundary, parallel to the road by the sports hall. In addition to the primary school, a sports hall and a car park, there are also various sports facilities on the school grounds. The construction site of the new building including the adjacent outdoor area with access road and car parks covers a total of around 5,000 square metres. The area is available as a construction site setup area, a construction fence will be provided. Due to the structural extension of the primary school, the construction site at the north-western end is directly adjacent to the existing school building. The terrain is level. For the Wandlitz primary school extension project, a BNB silver certification with the system variant classroom building, version 2017 (bnb_un_2017) is being sought. The client has also applied for funding as a climate-friendly non-residential building with Qng (kfn Nwg-qng), which is why compliance with the special requirements of the Sustainable Buildings Quality Seal (qng) is required (requirement level Qng-plus). To achieve this goal, compliance with the requirements formulated in the appendices to the specifications is necessary during the planning and construction of the project. The following services are required: Installation of lightning protection system protection class III for a new school building, air-termination system on the roof and discharge system for connection to earthing system previously installed on site

Details: Execution of Renovation of the Industrial Flooring On Level -1 of Wroclaw Główny Railway Station, Including: 1. The subject of the Order is the execution of renovation of the industrial flooring on level -1 of Wroclaw Główny Railway Station, Detailed Scope of Works in accordance with the Measurement, See Appendix - Request for Proposal, Measurement P. 1 2. Purchase of materials, securing the area, removal of rubble on the contractor’s side. Place for a waste container in the delivery zone in the underground car park adjacent to the tunnel. 3. Due to the need to maintain continuity of deliveries to the service premises, the work will be carried out in sections, while maintaining a passage for tenants, after prior arrangement of the Works Schedule with the Facility Manager. 4. Location: Wroclaw Główny Railway Station, Ul. Piłsudskiego 105, 50-085 Wrocław (according to the attached overview map - see the appendix) 5. Payment: 30-day bank transfer 6. Settlement: Lump sum based on the offer and acceptance protocol 7. Deadline for completion: Up to 8 weeks from signing the order

Details: Task: Execution of Renovation of the Internal Elevation of the Warehouse Tunnel On Level -1 of Wroclaw Główny Railway Station, Including: 1. The subject of the Order is the execution of renovation of the internal elevation of the warehouse tunnel on level -1 of Wroclaw Główny Railway Station, Detailed Scope of Works in accordance with the Measurement - See Appendix entitled Request for Proposals and Measurement S. 1. 2. Purchase of materials, securing the area, removal of rubble are the responsibility of the Contractor. Place for a waste container in the delivery zone in the underground car park adjacent to the tunnel. 3. Due to the need to maintain continuity of deliveries to service premises, the work will be carried out in sections, while maintaining a passage for tenants, after prior arrangement of the Works Schedule with the Facility Manager. 4. Location: Wroclaw Główny Railway Station, Ul. Piłsudskiego 105, 50-085 Wrocław (according to the attached overview map - see the appendix entitled Tunnel to be renovated - location in the building) 5. Payment: 30-day bank transfer 6. Settlement: Lump sum based on the offer and acceptance protocol 7. Deadline for completion: Up to 8 weeks from signing the order

Details: B01-08 Interior doors, toilet partitions, sliding door, movable partition Short description of the property: The construction project involves a free-standing 2-storey new building of a sports changing room with a club restaurant. The new building is to be an efficiency building and achieve level 40 (beg). The construction project is in drinking water zone IIIB. Various requirements must be observed. Due to the approved BBSR funding (Federal Institute for Building, Urban and Spatial Research), extensive requirements must be met in terms of the quality of the materials, particularly in reinforced concrete and timber construction. The building is planned as a mixed construction. The ground floor will be built predominantly solid and the upper floor primarily in timber construction and with only a few reinforced concrete walls. The roof is divided into two parts, a pent roof with solar panels is planned to the north and the building will have a flat green roof to the south. An elevator will be integrated to ensure accessibility. Rainwater drainage is carried out via rainwater troughs. The heating is operated via surface collectors, and the hot water supply is decentralized. A bicycle shelter will also be built on the construction site, as well as car parking spaces.

Details: The town of Königs Wusterhausen intends to award the construction work in the construction project "conversion of bus stops with crossing aid and car park Niederlehmer Chaussee L30" in 15713 Königs Wusterhausen - Ot Wernsdorf. The subject of this tendering procedure is the construction preparation / clearing of the construction site. Rough quantities of the measure: 1. Construction site preparation - setting up and clearing the construction site - maintaining the construction site - staking out the construction area - erecting, maintaining and removing 20.00 m of construction fencing 2. Traffic safety - traffic law. Obtaining orders - 20.00 m of protective fence erected - clearing - moving the protective fence 3. Demolition, felling and clearing work - 23.00 pieces of felling trees, trunk circumference 30 - 50 cm - 18.00 pieces of felling trees, trunk circumference >50 - 100 cm - 27.00 pieces of felling trees, trunk circumference >100 - 200 cm - 2.00 pieces of felling trees, trunk circumference >200 cm - 250 cm - 3,500.00 m2 of building site clearing branches, growth, trunk circumference. Up to 50 cm - professional disposal of cuttings, trunks, roots and crown material

Details: B01-40 Outdoor facilities Laying of underground sewage pipes, construction of a lifting station and a grease trap, paving work, planting work, fence construction and metalwork Brief description of the object: The construction project is a free-standing 2-storey new building of a sports changing room with a club restaurant. The new building is to be an efficiency building and achieve level 40 (beg). The construction project is in drinking water zone IIIB. Various requirements must be observed. Due to the approved BBSR funding (Federal Institute for Building, Urban and Spatial Research), extensive requirements must be met in terms of the quality of the materials, particularly in reinforced concrete and timber construction. The building is planned to be a mixed construction method. The ground floor will be built predominantly solid and the upper floor primarily in timber construction and with only a few reinforced concrete walls. The roof is divided into two parts: a pent roof with solar panels is planned to the north and a flat green roof to the south. An elevator will be integrated to ensure accessibility. Rainwater drainage will be via rain gutters. Heating will be operated via surface collectors and hot water will be provided decentrally. A bicycle shelter will also be built in the construction area and car parking spaces will be planned.

Details: Description Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 1 Lot Communications Equipment 2,200,000.00 6 Unit Base Radio, Ntc-type Approved Equipment, 136-174 Mhz Frequency Range, 50 Watts Maximum Output Power, Programmable To Ntc Assigned Frequency Specifications General A. Frequency Range - Uhf: 400-470mhz*; Vhf:136-174mhz B. Channel Capacity- 48 (16 Channels Per Zone) C. Zone Capacity - 3 D. Channel Spacing - 12.5/25khz E. Operating Voltage - 13.6 V ± 15% F. Current Drain - Standby: Around 0.3a Receive: < 1>1ghz G. Weight - 1100g H. Dimensions - 164 X 43 X150 Mm I. Frequency Stability - ±0.5 Ppm J. Antenna Impedance - 50ω Receiver A. Sensitivity - Analog: 0.3µv (12db Sinad); 0.22µv (typical) (12db Sinad); 0.4µv (20db Sinad) Digital: 0.3µv/bers5% B. Selectivity - Tia-603: 60db @ 12.5khz/ 70db @ 25khz Etsi: 60db @ 12.5khz/ 70db @ 25khz C. Intermodulation - Tia-603: 70db @ 12.5/25khz Etsi: 65db @ 12.5/25khz D. Spurious Response Rejection- Tia-603: 70db @ 12.5/25khz Etsi: 70db @ 12.5/25khz E. Blocking- Tia-603: 90db Etsi: 84db E. Hum And Noise- 40db @ 12.5khz; 45db @ 25khz F. Rated Audio Power Output- Internal (@ 16 Ohm Load): 4w External (@8 Ohm Load): 8w Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 1 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) G. Max Audio Power Output - Internal (@16 Ohm Load): 6w External (@ 8ohm Load): 12w H. Rated Audio Distortion - ≤3% I. Audio Response - +1~-3db J. Conducted Spurious Emission - <-57dbm Transmitter A. Rf Power Output – Low Power Version: 1-25w (uhf/vhf) High Power Version: 5-45w (uhf) / 5-50w (vhf) B. Fm Modulation – 11kof3e @ 12.5khz; 16k0fe @ 25 Khz’ C. 4fsk Digital Modulation – 12.5khz Data Only: 7k60fxd 12.5khz Data & Voice:7k60fxw D. Conducted/radiated Emission - -36dbm<1ghz>1ghz E. Modulation Limiting- ±205khz @ 12.5khz F. Fm Hum & Noise- 40db @ 12.5khz 45db @ 25khz G. Adjacent Channel Power- 60db @ 12.5khz; 70db @ 25khz’ H. Audio Response- +1 ~ -3db I. Audio Distortion- ≤3% J. Digital Vocoder Type- Ambe+2™ Or Selp K. Digital Protocol- Etsi-tsi02 361-1, -2, -3 1 Lot Engineering Plans And Services (professional Fee) 30 Unit Handheld Radio (vhf), Ntc Type Approved Equipment, 136-174mhz Frequency Range, 5 Watts' Maximum Out-put Power, Programmable To Ntc Award Frequency. Accessories: 1. Belt Clip 2. Standard Desk Charger 3. Rubber Duck Antenna 4. Manual General: A. Frequency Range- Uhf: 400-470 Mhz, Vhf:136-174mhz B. Channel Capacity - 128 C. Zone Capacity - 8 D. Zone Channel - 16 E. Channel Spacing - 12.5khz/20kh/25khz F. Operating Voltage -7.4v G. Battery - 1500mah (standard); 2000mah (optional) H. Battery Life - (5/5/90 Duty Cycle, High Tx Power) - Analog: 12h (1500mah), 16h (2000mah) - Digital: 16h (1500mah), 21h (2000mah) I. Frequency Stability - ±0.5ppm J. Antennal Impedance - 50ω K. Weight (with Antenna & Battery) -230g L. Dimensions (h X W X D) - 115 X 55 X 295mm M. Display - 1.77 Inch Tft Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 2 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) Receiver: A. Sensitivity - Digital: 0.18µv / Bers % Analog: 0.18µv(12db Sinad) B. Adjacent Channel Selectivity - Tia -603: 60db@12.5khz, 70db@20/25khz Etsi: 60db@12.5khz, 70db@20/25khz C. Intermodulation- Tia- 603:70db@12.5/20/25khz Etsi: 65db@12.5/20/25khz D.spurious Response Rejection- Tia -603: 70db@ 12.5/20/25khz Etsi: 70db@12.5/20/25khz E. Blocking - Tia -603:80db Etsi: 84db F. Hum And Noise- 40db@20khz, 45db@25khz G. Rated Audio Power Output - 1w H. Rated Audio Distortion - <3>1ghz E. Modulation Limiting - +2.5khz@12.5khz, +4.0khz@20khz, 15.0khz@25khz F. Fm Hum&noise - 40db@12.5khz, 43db@20khz, 45db@25khz G. Adjacent Channel Power- 60db@12.5khz, 70db@20/25khz H. Audio Response- +1 To -3db I. Audio Distorted - ≤% J. Digital Vocoder Type - Ambe +2™ Environmental: A. Operating Temperature - -30°~+60°c B. Storage Temperature - -40°c~+85°c C. Esd - Iec 61000-4.2 (level 4) ±8kv (contact); ±15kv(air) D. Dust And Water Intrusion - Iec60529-ip54 E. Humidity - Mil -std-810g F. Shock And Vibration - Mil-std-810g 1 Lot Installation Of Communication Equipment 1 Unit Mini Duplexer (vhf) -tuned To Working Frequency, 50 Watts 7 Unit Mobile Radio (vhf) - Ntc-approved Type (commercial), 50w, Programmable To Ntc Assigned Frequency Frequency Range 136-174 Mhz, With Magnetic Mount Mobile Antenna 6 Lot Ntc Permit To Purchase/possess And Radio Station License 6 (six) Units Base Radio 30 Lot Ntc Permit To Purchase/possess And Radio Station License For 30 (thirty) Units Handheld Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 3 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 Lot Ntc Permit To Purchase/possess And Radio Station License For 1 (one) Unit Repeater 7 Lot Ntc Permit To Purchase/possess And Radio Station License For 7 (seven) Mobile Radio 1 Lot Programming, Commissioning/propagation And Testing And Delivery (30 Days) Additional Requirements: * Provide A Network Diagram That Is Applicable To The Area * With History/experience In The Installation Of A Working Communication System In The Area *accredited With Ntc-car 1 Unit Repeater (vhf), Ntc-type Approved Equipment, 136-174 Mhz Frequency Range, 50 Watts Maximum Output Power, Programmable To Ntc Assigned Frequency. Specifications: General A. Frequency Range - Uhf 1: 400-470mhz; Uhf 2: 450-520mhz; Uhf 3: 350-400mhz; Vhf: 136-174 Mhz B. Channel Capacity - 16 C. Channel Spacing - 12.5khz/20khz/25 Khz D. Operating Voltage - 13.6v±15% E. Current Drain - Standby: ≤0.8a; Transmit:≤11a F. Frequency Stability - ± O.5ppm G. Antenna Impedance - 50ω H. Duty Cycle - 100% I. Dimensions (h X W X D) - 88 X 483 X 366 Mm J. Weight - 8.5 Kg K. Lcd Display - 220 X 176 Pixels, 262000 Colors; 2.0 Inch, 4 Rows Receiver A. Sensitivity - Analog: 0.28µv (12 Db Sinad); 0.22µv (typical) 12db Sinad) 0.4 Μv (20db Sinad) Digital: 0.3µv/ber5% B. Adjacent Channel Selectivity- Tia-603: 65db @ 12.5 Khz; 75 Db @20/25khz Etsi: 65 Db @ 12.5 Khz; 75 Db @ 20/25khz C. Intermodulation- Tia -603: 75db @ 12.5/20/25khz Etsi: 70db @ 12.5/20/25khz D. Spurious Response Rejection Tia-603: 80db @ 12.5/20/25khz Etsi: 80db @ 12.5/20/25khz E. Hum And Noise - 40db@ 12.5khz; 43db@20khz; 45db@25khz F. Rated Audio Power Output - 0.5w G. Rated Audio Distortion- ≤3% H. Audio Response - +1 ~ -3db I. Conducted Spurious Emission - <-57dbm Transmitter Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 4 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) A. Rf Power Output - 5-50w B. Fm Modulation - 11k0f3e @ 12.5khz; 14k0f3e @ 20khz; 16k0f3e @ 25 Khz C. 45sk Digital Modulation - 12.5khz Data Only: 7k60fxd; 12.5khz Data And Voice:7k60fxw D. Conducted/radiated Emission - -36dbm ≤ 1ghz; -30dbm > 1ghz E. Modulation Limiting - ±2.5khz @ 12.5 Khz; ±4.0khz @ 20khz; ±5.0khz @ 25khz F. Fm Hum & Noise - 40db @ 12.5khz; 43db @ 20khz; 45db @ 25khz G. Adjacent Channel Power - 60db @ 12.5khz; 70db @ 20/25khz H. Audio Response - +1 ~ -3db I. Audio Distortion - ≤3% J. Digital Vocoder Type - Ambe +2™, Selp, Nvoc, Comm K. Digital Protocol - Etsi-ts102 361-1, -2-, -3 Environmental Specifications A. Operating Temperature - -30°c ~+60°c B. Storage Temperature - -40°c ~ +85°c Accessories: 1. 1 Unit Tx Antenna (2 Elements Of Variloop Antenna) Cut, Fold And Tuned To Ntc Tx Assigned Frequency 2. 1 Unit Rx Antenna (2 Elements Of Variloop Antenna) Cut, Fold And Tuned To Ntc Tx Frequency 3. 100 M Coax Cable Rg-8 (japan) 4. 4 Pcs. Pi-259 Connector (good Quality) 5. Regulated Power Supply (13.8 V Dc/30 Amp) 6. With Pt Mask Antenna And Repeater Cabinet This Is A Lot Bidding, Partial Bids Are Not Allowed Please Indicate Brands Of Offers And Attach Technical Brochures In The Eligibility And Technical Proposal Please Indicate Unit Prices Of Offers In The Financial Proposal Bidders Must Possess Valid Mayor's/business Permit With A Relevant Line Of Business In The Supply, Delivery And Installation Of Communications Equipment For Use Of Bfp Under Pr No. 2 Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 5 Of 5

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman

Details: The Martinsburg Va Medical Center Is Conducting This Sources Sought To Identify Contractors Who Possess Capabilities To Provide The Services Described In The Statement Of Work Below. as Permitted By The Far Part 10, This Is A Market Research Tool Being Utilized For The Informational And Planning Purposes. Your Responses Will Assist The Government In The Development Of Its Acquisition Strategy. response Is Strictly Voluntary It Is Not Mandatory To Submit A Response To This Notice To Participate In Formal Rfq Process That May Take Place In The Future. However, It Should Be Noted That Information Gathered Through This Notice May Significantly Influence Our Acquisition Strategy. All Interested Parties Will Be Required To Respond Separately To Any Solicitation Posted As A Result Of This Sources Sought Notice. respondents Will Not Be Notified Of The Results Of The Evaluation. We Appreciate Your Interest And Thank You In Advance For Responding To The Sources Sought. this Service Will Be Implemented Using The North American Industry Classification System (naics) Code 485999. if A Small Business Is Interested In This Procurement, They Must Provide At Least 51 Percent Of The Services Rendered. notes all Capability Statements/responses To This Sources Sought Notice Shall Be Submitted Via Email Only To Tracy.dotson@va.gov. Telephone, Fax, Or Any Other Form Of Communication Inquiries Will Not Be Reviewed Or Accepted. Responses To This Sources Sought Notice Must Be Received No Later Than January 22, 2025 At 3:00 P.m. (eastern Standard Time). This Sources Sought Notice May Or May Not Assist The Va In Determining Sources Only. A Solicitation Is Not Currently Available. If A Solicitation Is Issued, It May Or May Not Be Announced At A Later Date, And All Interested Parties Shall Respond To That Solicitation Announcement Separately From The Responses To This Sources Sought Notice. disclaimer this Rfi Is Issued For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked A Proprietary Will Be Handled Accordingly In Accordance With (iaw) Federal Acquisition Regulation (far) 15.201(e), Rfis May Be Used When The Government Does Not Presently Intend To Award A Contract, But Wants To Obtain Price, Delivery, Other Market Information, Or Capabilities For Planning Purposes. Responses To These Notices Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Incurred Associated With Responding To This Rfi. interested & Capable Responses nco 5 Is Seeking Responses From Businesses That Are Interested In This Procurement And Consider Themselves To Have The Resources, Rights, And Capabilities Necessary To Provide These Services. Please Respond With Your: business Name (including Unique Entity Id (sam.gov), Business Type, Socio-economic Status (e.g., Veteran-owned, Woman-owned, Disadvantaged Small Business, 8(a), Etc.), Person Of Contact (including Telephone Number & Email Address). capability Statement gsa Contract Number, If Applicable, To Include Naics brief Summary Of Categories Of Professional Services That Your Company Can Provide. applicable Certification(s)/licenses performance Work Statement (pws) general Procedure: the Contractor Shall Be Required To Furnish All Necessary And Appropriate Labor, Supervision, Materials, Equipment, And Supplies To Provide Valet Parking Services In Accordance With The Terms And Conditions Of The Resulting Contract And The Specifications And Requirements, As Specified Herein. The Contractor Shall Provide Valet Parking Services To Alleviate Parking Problems Experienced At The Martinsburg Vamc. The Valet Parking Services Shall Be Intended To Accommodate Veteran Patients, Their Family Members, And Visitors. The Contractor Shall Be Required To: staffing: The Contractor Will Provide Adequate Staffing Of Customer Service Attendant(s) For The Hours Of Operation Specified. The Contractor Will Always Provide Adequate On-site Supervision To Handle Customer Concerns And Parking Incidents. The Contractor Does All Recruiting, Hiring, Training, And Supervising. contractor Should Base Their Plan On The Martinsburg Vamc Serving Approximately 100 Vehicles Per Day. provide Va Approved Valet Claim Checks, Securing Keys, Parking Vehicles, Delivering Vehicles, And Directing Certain Valet Vehicles To And From The Valet Greeting Area. provide Professional Valet Booth(s), Locking Key Cabinet(s), Safety Cones, Signs, Roadblocks And Other Supplies And Materials And/or Miscellaneous Items Necessary To Operate And Manage Valet Services. All Signs Shall Be At Least 30 X 30 . Hand-written Signs Shall Not Be Allowed. blocking Of Any Roadway Or Re-routing Of Traffic Must First Be Approved By The Martinsburg Va Police Department. the Contractor Will Provide Va Approved Walkie-talkies Or Radios For The Valet Staff To Communicate With Each Other While Conducting Their Normal Duties Of Valet Parking. contractor Will Provide And Install A Minimum Of 2 "no Tipping" Signs. Signs Must Be A Minimum Of 30 X30 . The No Tipping Policy Shall Be Strictly Enforced. Valet Parking Attendants And All Other Parking Staff Shall Be Restricted From Accepting Tips Of Any Kind. contractor Will Provide And Install A Minimum Of 2 Insurance Liability Signs For Vehicle Damage Claims. Signs Must Be A Minimum Of 30 X30 . provide Experienced, Fully Trained, And Professional Valet Parking Attendants To Perform The Valet Parking Services. constantly Assess Va Parking Situation Taking Into Consideration All Parking Spaces Available To Adjust The Level Of Parking Service And Personnel Required To Perform Under The Contract Without Exceeding The Required Wait Time To Valet Parked And Retrieved Vehicles. provide Parking And Traffic Control Recommendations As Deemed Appropriate And Necessary To Provide Quality Services. location: martinsburg, Wv Va Medical Center: 510 Butler Ave, Martinsburg, Wv 25405 period Of Performance: base Period (year) + 4 Option Periods (year). site Inspection: a Pre-proposal Site Inspection / Walk-through For All Interested Contractors Will Be Scheduled By The Contracting Officer For Any Interested Contractors. All Interested Contractors Are Encouraged To Attend The Site Inspection And Walk-through Of The Martinsburg Va Facility. Only One Walk-through For This Solicitation Shall Be Conducted. The Intent Of The Site Inspection Is To Give All Interested Contractors An Opportunity To Get Familiar With The Parking Lots Designated To Be Used For The Valet Parking. note: The Contractor Shall Be Responsible For All Costs And Travel Expenses Associated With The Site Inspection Visit. While Not Mandatory, Failure To Attend The Site Inspection Walk-through Of The Martinsburg Va Facility Shall Not Release The Contractor From Complying With The Terms, Conditions, Specifications, And Requirements Of The Resulting Contract. designated Valet Parking Lots: the Martinsburg Vamc Will Designate Parking Lots To Be Used For The Valet Parking Services. the Contractor Shall Have Complete Control Of Vehicles Parked In Designated Valet Parking Area(s) In The Context Of Maximizing The Space Available And Facilitating A Smooth Operation. The Martinsburg Vapd Will Always Maintain Authority Over All Vehicles And Parking At The Facility. If Deemed Necessary By The Martinsburg Vamc, The Contractor Shall Be Required To Double Stack Vehicles To Maximize The Space Available. The Contractor Shall Be Responsible For Parking Control And Monitoring The Designated Parking Lots Assigned For The Valet Operation. contractor Responsibilities: the Contractor Shall Provide Consistent, Responsive, Secure, And Efficient Valet Parking Operations. The Contractor Shall Be Responsible For Providing Patrons With A Valet Claim Check/ticket, Securing Keys, Parking, Delivering, And Directing Certain Valet Vehicles To And From The Valet Drop Off And Pick Up Area. The Martinsburg Vamc Will, At Their Discretion, Provide The Contractor With Instructions On Addressing The Issue Of Who Qualifies For Valet Parking Services And The Method Of Identifying Such Individuals. Such Instructions May Include Verbiage Such As Vehicles Requiring Valet Parking Shall Be Stopped By The Valet Parking Attendants, Who Shall Be Required To Ask The Patients Or Drivers For An Appointment Letter, Va Patient Identification Card, Clinic Or Healthcare Service Which Will Be Visited And The Estimated Time Of Departure. Valet Parking Attendants Shall Also Be Required To Ask Visitors The Name Of The Inpatient Veteran, Name Of Event Attending Or The Name Of The Va Staff That Will Be Visited And Their Estimated Time Of Departure. The Exact Procedures Will Be Provided To The Contractor By The Cor Covered In This Statement Of Work. The Contractor Shall Be Responsible For Screening Out Vendors And Employees, Except Those With Handicapped Placards Or License Plates, From Inappropriately Using The Valet Parking Services At The Martinsburg Vamc. All Vehicles Parked By The Parking Attendants Shall Be Locked And Secured. Driver S Keys Shall Be Secured At The Valet Booth(s). A Claim Check Shall Be Issued To The Driver Using The Valet Service. Claim Checks Shall Contain The Valet Company S Liability Disclaimer And Contact Information. Contractor Shall Be Responsible For Directing Vehicles Not Wishing To Participate In The Valet Parking Services To Other Designated Parking Locations. Contractor Shall Designate A Full-time Supervisor To Be On Site During Set-up, Tear-down Operations, And Performance Of The Work. The Contractor Shall Always Provide Adequate On-site Supervision To Handle Customer Concerns And Parking Incidents. Duties Of The Supervisor Shall Also Include But Not Be Limited To Customer Relations, Training, And Improving All Valet Services And Coordinating All Work And Additional Services With The Contracting Officer S Representative (cor). Contractor Shall Coordinate With The Cor To Designate Front Drop Off And Pick Up Area(s) Near The Entrance For Loading And Unloading Of Handicapped Patients/patrons So As Not To Interfere With Normal Valet Parking Operation. Handicapped Patients/patrons Shall Be Permitted To Pull To The Designated Drop Off And Pick Up Area(s) Near The Entrance. The Parking Attendants Shall Then Be Required To Park The Vehicles Or Direct The Drivers To A Handicap Space For Self-parking. Patients With Handicap Placards Or License Plates On Their Vehicles Shall Be Given The Option Of Self-parking In Handicapped Slots Or Valet Parking. Non-handicapped Employees Shall Be Directed To Self-park. patient Assistance: the Service Shall Include Assisting Patients And Their Families Who Request Front Door Service, Assisting With Wheelchairs And Other Devices In And Out Of Cars, And Parking Of Automobiles To Include Vehicles With Adaptive Equipment. To Reduce The Risk Of Injuries To Valets And Potentially To The Veterans Using Valet Services, Valets Will Be Responsible For Following The Martinsburg Vamc S Practices For Safe Patient Handling And Mobility (sphm) Program. The Contractor Shall Deliver These Wheelchairs Upon Patient Or Caretaker Request To The Patient To Facilitate Patient Travel From The Drop Off Area To The Volunteer Desk At The Hospital Entrance, If Requested. The Contractor Will Not Escort Patients Within The Hospital/facility. All Wheelchairs Used Will Be Noted On The Contractor Ticket For Accountability. Parking Patrons Shall Be Always Treated Courteously And With Respect. Parking Attendants Shall Drive Slowly And Cautiously, Paying Attention To Pedestrian Traffic. training/licenses/qualifications: the Contractor Shall Provide Bonded, Fully Trained, Experienced Parking Attendants Who Possess A Valid State Driver S License, Be U.s. Citizens And Be Fluent In The English Language. Contractor Personnel Shall Be At Least 18 Years Of Age, Have No Criminal History, And Be Able To Perform All General Duties, Functions, And Activities As Required. Contractor S Staff Qualifications Shall Also Include Expertise In The Proper Operation Of All Types Of Motor Vehicles, And A Commitment To The Highest Level Of Respect, Courtesy, Compassion, And Safety. The Contractor Shall Furnish At Its Cost, Evidence Of Qualifications And Competency Assessment Of All Employees. Such Evidence Shall Include But Are Not Limited To Copies Of Driver S Licenses, Dmv Printouts, And Copies Of Security Background Checks. To Be Eligible To Perform Under This Contract, Each Contract Employee Must Satisfactorily Complete Va Talent Management System (tms) Web Base Training. Effective March 23, 2012, All Contractors Are Required To Begin Using Tms For Their Mandatory Training, Utilizing The Create New Feature At Contract Employees Will Self-enroll Into Tms And Select The Following Courses. Training Is To Be Accomplished Outside Of Contract Duty Hours. Tms Courses Will Require Completion Annually. The Contractor Shall Be Responsible For Providing A Facility Orientation To All Valet Parking Attendants And Offer A Training Program That A Minimum Will Include The Following: security patient Privacy safety emergency Procedures accidents / Injuries communication (with Contractor Staff /martinsburg Vamc). the Contractor Shall Maintain Documentation Certifying That All Employees Assigned To The Contract Have Received The Training. If Deemed Necessary By The Government, Additional Training Shall Be Offered At The Martinsburg Vamc And Scheduled At The Post Award Meeting On A Mutually Agreeable Date And/or Coordinate With The Cor. In Addition To Safe Driver Training, The Minimum Customer Service Training Must Be Provided And Documented For Each Employee. the Importance Of A Positive Attitude verbal Communication Methods That Are Courteous And Informative non-verbal Communication appearance volume And Tone face To Face Contact self-evaluation violence In The Workplace contractor Employees Must Know Basic Directions For Destinations In The Hospital And Around The Community. Contractor Employees Must Keep The Work Area Clean And Always Appear Ready For Work, Even When No Customers Are Present. uniforms: the Contractor S Uniform Should Be Prior Approved By The Cor Before Initial Commencement Of Work. The Selected Uniform Will Be Standard For All Employees. At No Time Will Any Contract Employee Wear Their Own Jacket, Shirt, Pants, Coat, Gloves, Or Head Gear. All Cold Weather/rain Gear Will Be Supplied By The Contract Company. Uniforms Shall Facilitate Easy Identification Of Contractor Employees By Employee Name And Company Name. Uniforms Shall Be Always Worn During Performance Of Contract Duties. Uniforms Will Be Neat In Appearance. Shirts And Pants Will Be Ironed Or Pressed. The Cor Can Request A Contractor To Be Sent Home If Their Uniform Is Not Presentable. The Contractor Will Replace Any Worn-out Or Torn Uniform At No Cost To The Government Or Employee. Approved Uniforms And Related Accessories, Listed Below, Do Not Have To Be New But Must Be In Good Condition: Shirt, Button Up, Long Sleeve (cold Weather Days) Shirt, Button, Up Short Sleeve trouser, All-season Weight jacket, Winter, Heavyweight Artic Field Coat jacket, Lightweight trench Raincoat winter Gloves, (pair), (color To Match Accessories) hat With Company Logo Or Valet Written On Face, (color To Match Accessories) earmuffs Or, (color To Match Accessories) the Outermost Article Of Clothing Being Worn By The Valet Staff Above The Waist Shall Have, In Whole Or In Part, Reflective Material To Improve Worker Visibility To Alert Drivers Of The Valet S Presence When Walking Through The Lots. The Reflective Gear Shall At A Minimum Meet Ansi 107-2015 Type R, Class 2 Requirements. claims/damage: the Contractor Shall Be Completely Liable For All Vehicle Damages Occurred While At The Possession Of The Valet Staff And/or Service. All Vehicle Damage Claims Brought To The Attention Of The Valet Contractor Shall Be Immediately Investigated And Validated Claims Shall Be Processed For Settlement. any Claims Of Damage Or Missing/stolen Property Involving Patient/customer S Vehicles Shall Be The Responsibility Of The Contractor. The Va Assumes No Responsibility For Such Claims. All Claims Shall Be Directed To And Handled By The Contractor Supervisor Who Shall Immediately Notify The Cor And The Va Police Department (vapd). Corrective Actions To Resolve All Claims Shall Commence Immediately. All Claims Shall Be Settled Within Fourteen (14) Working Days Unless Extenuating Circumstances Warrant Additional Time And Is Authorized By The Contracting Officer. All Vehicle Accidents Or Theft Claims Should Be Immediately Reported To The Va Police For Investigation. martinsburg Vamc Hours Of Operation: proposed Hours Of Operation Are 6:30 Am To 5:00 Pm Monday Through Friday For The Martinsburg Vamc, Excluding Federal Holidays. The Cor Will Notify The Contractor If Valet Will Be Operating On Other Days Specifically Declared By The President Of The United States To Be A Federal Holiday. The Contractor Shall Adjust The Level Of Valet Parking Staff As Necessary To Ensure An Efficient Operation. If Deemed Necessary By The Government, The Hours Of Operation May Be Periodically Adjusted Based Upon Volume And Demand. The Medical Center Does Not Routinely Close For Adverse Weather Conditions. When The Medical Center Remains Open During Adverse Weather Events It Is Expected Sufficient Staff Will Be On Site To Operate The Valet Service. At 5:00 Pm, The Parking Attendants Shall Turn Over All Remaining Keys And Associated Tickets To The Aod. A Log Will Be Completed For All Remaining Keys Turned Over To The Aod. The Log Will Include The Ticket Number, Vehicle Make And Model, Registration Number, Valet Attendant S Name That Tuned Keys Over To The Aod, And The Aod S Name With Signature That Took Responsibility Of The Keys. The Aod Will Then Lock Up The Keys In The Aod S Safe. federal Holidays: listed Below Are The Eleven Federal Holidays: No Work Will Be Performed On These Days. new Year S Day january 1 martin Luther King S Birthday third Monday In January president S Day third Monday In February memorial Day last Monday In May juneteenth june 19 independence Day july 4 labor Day first Monday In September columbus Day second Monday In October veterans Day november 11 thanksgiving Day fourth Thursday In November christmas Day december 25 special Events: the Contractor Shall Be Notified In Advance Of Any Special Events Which Might Cause Parking Problems Because Of Additional Patients, Patrons, Or Visitors To The Medical Center. Contractors Shall Be Required To Adjust The Level Of Parking Staff To Accommodate The Workload Or Extra Vehicle Volume. proposed Plan: after Notification Of Contract Award, The Contractor Shall Have Forty-five (45) Calendar Days For Full Operational Implementation. This Must Include Finalizing Staff Requirements, Including Government-administered Background Investigations, Etc. The Contractor Shall Be Required To Implement Their Proposed Valet Parking Service Plan And Perform On A Day-to-day Basis For The Duration Of The Contract. ordering Activity: the Contractor Shall Not Accept Any Instructions Issued By Any Person Other Than The Contracting Officer Or Delegated Government Representative Such As The Cor Who Is Acting Within The Limits Of His/her Authority. quality Assurance: the Contractor Shall Be Responsible For Complying With All Appropriate Regulations And Guidelines Of The Occupational Safety And Department Of Transportation, And/or Any Other Pertinent Federal, State, And Local Policies Relating To The Herein Mentioned Work Or Valet Parking Services. The Contractor Shall Always Provide Adequate On-site Supervision To Achieve Quality Assurance And To Handle All Customer Concerns And Parking Incidents. All Tasks Accomplished By The Contractor Personnel Shall Be Performed To Preclude Damage Or Defacement To Vehicles Or Government-owned Furnishings, Fixtures, Equipment, And Facilities. The Contractor Shall Report Any Damage Observed Or Caused By The Contractor Personnel To The Cor. The Contractor Shall Be Responsible For The Replacement Of Items Or To Repair Vehicles Or Facilities To Previous Condition If The Contractor Is Determined To Be At Fault For The Damage. Complaints: the Contractor Shall Promptly And Courteously Respond To Complaints Within 10 Working Days, Including Complaints Brought To The Contractor S Attention By The Contracting Officer Acting As The Quality Assurance Evaluator (qae). The Contractor Shall Maintain A Written Record Of All Complaints, Both Written And Oral Showing The Identity Of The Individual, The Nature Of The Complaint, And The Contractor S Response. The Contractor Shall Permit The Government To Inspect Such Records Upon Request. reports: the Contractor Shall Establish A Method To Validate The Number Of Vehicles Parked Per Day (i.e., Parking Stubs) And Submit A Monthly Report To The Contracting Officer And Cor Within Seven (7) Calendar Days After Each Month Ends. The Report Shall Summarize The Number Of Vehicles Parked By Valet Attendants Based On Date And Time (sorted By Morning Or Afternoon). The Report Shall Also Identify The Peak Hours During The Day And How Many Vehicles Were Parked During Those Peak Hours. The Report Shall Also Include Any Incidents, Accidents Or Special Situations With Patients, Visitors, Va Employees, Or Va Volunteers. The Reports Must Be Legible And Easy To Understand. Reports Should Be Signed By The Supervisor And/or Authorized Representative Of The Contractor. Contractor May Provide For Approval A Sample Of The Types Of Report Forms Used On Similar Projects. disruptive Behavior: the Contractor Shall Always Provide Adequate Onsite Supervision To Handle Disruptive Behavior Of Any Parking Attendant Performing Under The Contract. The Contractor Agrees To Permanently Remove Any Member Of Its Parking Staff From Performing Work Associated With This Contract, At The Sole Discretion Of The Va. Any Legal Misconduct Or Violations Will Be Subject To Governing Security, Law Enforcement, And Standards Of Conduct On Veterans Affairs Property, 38 Cfr 1.218. examples Of Misconduct Include: neglect Of Duty, Including Sleeping While On Duty, Unreasonable Delays, Or Failure To Carry Out Assigned Tasks, Conducting Personal Affairs During Official Time, Lack Of Or Limited Productive Service And Refusing To Render Assistance Or Cooperate In Upholding The Integrity Of The Valet Program At The Worksite. disorderly Conduct, Use Of Abusive Or Offensive Language, Quarreling, Rude Inappropriate Comments, Sexual Harassment, Intimidation By Words Or Actions, Or Fighting. Also, Participation In Disruptive Activities Which Interfere With The Normal And Efficient Operations Of The Government. Theft, Vandalism, Immoral Conduct, Or Any Other Criminal Act. selling, Consuming Or Being Under The Influence Of Intoxicants, Drugs, Or Substances Which Produce Similar Effects. involvement In Commercial Activities At Any Time While On Government Controlled Property (included Soliciting Sale, Donation, Etc., From Employees, Patients, Or Others). Improper Use Of Official Authority Or Credentials. unauthorized Use Of Communications Equipment Or Government Property (includes Unauthorized Or Personal Use Of Internet, Long Distance Telephone Services Or Government Computer Network). Possession Or Misuse Of Weapons(s). Receiving Gifts Or Tips From Va Employees, Veterans, Or Their Family Members. the Contracting Officer, In Conjunction With Cor Will Make All Determinations Regarding The Removal Of A Person(s) From The Work Site(s). In The Event Of A Dispute, The Contracting Officer Will Make Final Determination. Specific Reasons For Removal Of An Employee(s) Will Be Provided In Writing To The Contractor. buses Or Large Vehicle: patients Driving Buses Or Large Motor Vehicles Shall Be Directed To Self-park Their Vehicles In The Parking Areas Designated By Va Police. changes To Parking Lots: no Alterations To The Parking Lots Shall Be Permitted. government Responsibilities: the Participating Va Medical Center Shall Provide Orientation And Training On Va Policies And Procedures Relating To Security, Patient Privacy, Safety, Emergency Procedures, Accidents/injuries, And Communication With Va Staff. The Required Training Shall Be Scheduled At A Post Award Meeting On A Mutually Agreeable Date And Coordinated With The Cor. contractor Submittals / Insurance Requirements: contractor Shall Be Required To Provide Copies Of The Following: automobile Liability Insurance For Bodily Injury And Property Damage On All Vehicles Used In The Performance Of This Contract. Policies Covering Automobiles Operated In The United States Shall Provide Coverage Of At Least $200,000 Per Person And $500,000 Per Occurrence For Bodily Injury And $20,000 Per Occurrence For Property Damage. the Contractor Shall Assume Full Responsibility For All Contracted Employees And Maintain At The Minimum Liability Insurance. Proof Will Be Required, And Spot Checked Randomly Per Employee. background Screening: in Accordance With Vha Directive 0710 All Contractor Personnel Providing Services Under This Contract Shall Be The Subject To A Background Screening And Must Receive Favorable Adjudication From The Va Prior To Contract Performance. The Level Of Screening For This Contract Is: Special Agency Check (sac). Any Employee Whose Background Investigation Yields Unfavorable Results Shall Be Removed Immediately From Performance Under This Contract. In The Event The Screening Is Not Completed Prior To Contract Performance, The Contractor Shall Be Responsible For The Actions Of Those Individuals Performing Under The Contract. contractor Personnel Security Requirements: all Contractor Employee S Will Be Issued A Government Piv Card (id Card). The Piv Card Must Be Always Worn While On Va Property. The Piv Card Must Be Worn Above The Waist And Clearly Visible. The Contractor Shall Be Required To Coordinate With The Cor To Obtain The Va Provided Piv Cards For All Valet Parking Staff. All Va Provided Piv Cards Shall Be Returned If The Contractor Employee Leaves The Employment Of The Contractor, At The End Of The Contract Or Upon Completion Of Service. the C&a Requirements Do Not Apply, And That A Security Accreditation Is Not Required. drug/alcohol Policy: contractor Shall Ensure That All Valet Parking Staff Performing Under This Contract Complied With The Martinsburg Vamc Alcohol And Drug Free Workplace Policy. The Contractor Shall Be Expected To Conduct Random Alcohol And Drug Tests On All Valet Parking Staff. Random Alcohol And Drug Tests Shall Be Conducted At Least Once A Year On Each Employee. Proof Of Drug Screen Shall Be Submitted To The Cor And Will Be The Responsibility Of The Contractor To Cover The Cost. Valet Parking Staff Shall Also Be Subject To Drug And Alcohol Testing When Reasons Exist To Suspect The Use Of Illegal Drugs And/or Alcohol While On Duty That Impaired Judgment, Performance, Operation Of Vehicles And The Safety Of Veteran Patients, Va Employees, Visitors, Voluntaries And/or Other Valet Parking Staff. Upon Request, The Contractor Shall Be Expected To Provide Evidence Or Copy Of The Results Of Employee Drug And Alcohol Testing. This Shall Also Be At The Expense Of The Contractor. smoking Policy: vamc Martinsburg Is A Smoke/vape Free Campus. Smoking Or Vaping Is Not Permitted Within Or Around The Va Facility Grounds. cell Phone: cell Phone Use Shall Not Be Permitted While Parking Vehicles. performance Standards Summary: performance Standards Define Desired Services. The Government Performs Surveillance To Determine If The Contractor Exceeds, Meets, Or Does Not Meet These Standards. performance Objective acceptable Quality Level (aql) method Of Surveillance incentive/disincentive contractor Shall Perform All Of The Requirements In Accordance With Sow Section General Procedures -valet 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Patient Assists 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Training 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Uniforms 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow: Reporting Requirements 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. contractor Shall Perform All The Requirements In Accordance With Sow Section: Claims For Damages 95% co/cor Direct Observation And Documentation Of Unacceptable Performance incentives: Favorable Contractor Performance Evaluation. disincentive: A Contract Discrepancy Report (cdr) May Be Issued On The First Instance Of Failure To Provide The Acceptable Level Of Service. two Or More Issued Cdrs May Result In Reduction Of The Monthly Invoice Of 5%. place Of Performance martinsburg Va Medical Center 510 Butler Ave martinsburg, Wv 25405