Camera Tenders

Description: Announcement of the Order for the Supply of a Tent with Equipment and the Supply of 4 Thermal Imaging Cameras and a Thermal Imaging Drone Along with the Conduct of Training

Description: CATEGORY: Annual Maintenance Service - Desktops, Laptops and Peripherals - Desktop PC; ANY , Annual Maintenance Service - Desktops, Laptops and Peripherals - Printer (Monochrome , Laser , Composite Cartridge ); ANY , Annual Maintenance Service - Desktops, Laptops and Peripherals - Multifunction Printer (Monochrome , Laser , Composite Cartridge, Lower range; ANY , Annual Maintenance Service - Desktops, Laptops and Peripherals - UPS( Offline 1 KVA); ANY , ANNUAL MAINTENANCE SERVICE - AUDIO CONFERENCING SYSTEM - Ceiling Mount Camera; ANY; Neither OEM nor ASP , Annual Maintenance Contract for Networking Devices (Version 2) - L2 Switch; ANY , Annual Maintenance service - EPABX System

Description: CATEGORY: Camera 2Mp IP Cp Plus , 5 Mp very Focal , NVR 64 port , OFC Cable 6 Core , CAT 6 Cable , Media Converter , OFC Joint , Jointer Box , 2u Rack , 4 U Rack , 6U Rack , POE Switch 4 port , POE 8 Port , PvC Box 6 big 24 small , RJ 45 Connector , HDD for 25 Days Backup , Pipe 1 inch , Sadle , Flexible Pipe , Stay Wire , Clutch Wire , Poles Stand , installation cost , 2 core Power cable

Description: CATEGORY: Sliding Gate motor operated and controlled with Remote Material Mild Steel Dimension Height 8 feet and Length 16.5 feet , Side Gate manually operated. Material Mild Steel. Dimension Height 8 feet and Length 3 feet , Sentry Post Cabin Mild Steel 6 x 6x 8.5ft with roof shelter Door 01 Window 03 Shelf 01 Electric Wiring , Polycab Wire , MCB for Connections , 4MP Bullet Camera , NVR 8 Channels , Hard Disk 1 TB , Monitor 22 inch

Description: CATEGORY: Repair day book register for Tech Secs , Power supply cable for CCTV Camera , Lecture speech podium for tech trg room , Annual subscription of Tech magazine Auto Car English , Annual subscription of Tech magazine Electronics for you English , Annual subscription of Tech magazine Science Reporter English , Annual subscription of Tech magazine Digit English , Annual subscription of Tech magazine Competition Success English , Tech Book Basics of unmanned aerial vehicle Garvit Pandya , Tech Book Emerging Technologies for Engineers , Tech Book Basics Electronics Solid state in multicolor Ed

Description: Installation Of Additional Cctv Cameras Of Barangay Man-it, Passi City/ Barangay Man-it P 332,956.00 , Security Services ,city Of Passi, Iloilo

Details: Description Purchased And Installation Of 12 Units Of Cctv Camera Along Barangay 6

Description: Installation Of Cctv System At Usg Property Located In Nassau, The Bahamas. The Installation Will Include The Installation Of Equipment And Any Electrical Work Required. scope Of Work supplying Labor And Material For Installing Cctv Equipment To View All Perimeter Of The Property. all Cameras Should Be Position Pointing Away From Any Living Space. This Will Include The Pool, Patio And Any Common Occupant Area. The System Should Be Focus On The Perimeter Only. all Cameras Should Be Terminated And Viewed At The South Security Booth. the System Should Be Completely Disconnected From Any Off-property Network And Should Allow Absolutely No Off Property Viewing. This Requirement Is During And After Installation. vendor Is Responsible For Any Electrical, Masonry And Carpentry Needs Require To Complete Scope Of Work. This Will Include Poles, Trenching And Brackets. fiber Wiring Should Be Used On All Camera Feeds Over 50ft. power For All Cameras Should Be Installed Near The Hub In A Secure Location With Lock Access. a Minimum Of 50” Monitor Is Required For Main Viewing. a Minimum Of 32” Monitor Is Required For Spot Viewing. all Ptz Cameras Should Have Auto Patrol Capabilities And Manual Control From The Security Booth. nvr Programming Should Incorporate Triggers Which Alert Personnel, With And Output Siren/light Mounted In Security Booth, Off Activities At Any Camera. illuminators Should Be Used To Assist And Enhance Nighttime Viewing. system Should Be Able To Maintain 21 Day Of Recording Before Rewriting. main Hub And Nvr Should Be Locked In A Cabinet/chassis To Prevent Unauthorized Tampering. any Structural Adjustments Must Be Cleared By The Rsc Before Proceeding. any Work Not Completed To The Satisfaction Of The Rsc Will Be Repaired Or Replaced By The Company Without Additional Expense, In Equipment Or Labor Costs, To The Us Government. the Company’s Employees Will Clean Up After Themselves After Every Job. This Includes Removing Any Equipment And Materials Brought In By The Company, And Anything Debris Caused By Installation. electrical General Specifications the Contractor Shall Supply All Materials And Labor In Order To Complete The Scope Of Works. all Measurements Are To Be Confirmed By The Contractor On Site. all Work Shall Be Carried Out In A Professional Manner, With Superior Craftsmanship. the Contractor Is Responsible To Rectify Any Damage Caused While Executing The Project Upon Completion Of The Works. All Walls Are To Be Repaired After Installation Of Subsurface Equipment. all Work Should Meet Or Exceed The Local Codes the Contractor Shall Ensure That All Electrical Enclosures Or Panels Are Housed In Outdoor Rated Enclosures That Meet Or Exceed Nema 3r Ratings. all Electrical Cables Should Be Installed Into Appropriately Sized Non-metallic Liquid-tight Conduit. all Electrical Conduit Should Be Buried To The Appropriate Depth Based On Code Requirements. the Use Of Direct Burial Cable Is Prohibited. the Contractor Shall Use Non-metallic Wall Boxes As A Replacement For Existing Electrical Wall Boxes. the Contractor Is To Ensure That All Boxes Are Grounded As Per Code. Where Grounding Is Not Provided Contractor Is To Install As Necessary. the Contractor Shall Ensure That All Tv Cable (rg6) Or Fiber Lines Are Labeled And Terminated At Both Ends. the Contractor Shall Ensure That All Underground Electrical Ducts Terminate At Each End With A Pull/splice Box. the Contractor Is Responsible To Dispose Of All Materials Removed From The House. the Electrical Contractor Will Coordinate His Work With The Overall Progress Of The Project, To Avoid Miscommunications And Rework. electrical Contractors Will Provide Regular Progress Updates To The Embassy Staff Electrician. The Overall Project Manager Will Be The Facilities Manager, Or The Maintenance Supervisor In The Absence Of The Facilities Manager. interested Vendors Should Email Nelsonda@state.gov For A Copy Of The Solicitation Documents. you Are Encouraged To Visit Www.bahamas.gov.bs To See Requirements To Operate In The Bahamas

Description: Construction Work Of One Regional Office In Sylhet Under The Project Of Construction Of 7 Regional Offices Of Bangladesh Public Service Commission Secretariat. (sub-sector: 315kva Electrical Sub-stations And Accessories Under External Electrification Works, 8kva Generators (including Ats And Canopies), Air Conditioners (ac), Geysers And Accessories, On-grid Solar Systems, Lightning Arrester Systems, Fire Extinguisher , Cctv Camera, Networking (electric Cable, Internet Cable, Telephone Cable), Supply And Installation Of Submersible And Centrifugal Pump Motors, Conference With Multimedia System, Multipurpose Hall Sound System And Compound Security Lights).

Description: Public Safety And Security Program, Installation Of Closes - Circuit Television Camera At Barangay Carmen, Baguio District, Davao City , Construction Projects ,barangay Carmen, Davao City