Camera Tenders
Camera Tenders
INDUSTRIAL TECHNOLOGY DEVELOPMENT INSTITUTE Tender
Software and IT Solutions
Philippines
Closing Soon3 Mar 2025
Tender AmountPHP 35 K (USD 605)
Details: Description Please Quote Your Price For The Item/s Listed Below With The Following Conditions: • Electronic Copy Of Quotations Will Only Be Accepted If Sent Through The Bac E-mail Address, Admbac@itdi.dost.gov.ph And From The Official Email Address Of The Bidder Addressed To Mr. Eric M. Charlon, Itdi-bac Chairperson, Sub-committee On Shopping & Small Value Procurement. • Sealed Quotations Must Be Submitted To The Bac Office Addressed To Mr. Eric M. Charlon, Itdi-bac Chairperson, Sub-committee On Shopping & Small Value Procurement Per Quotation Indicating The Solicitation No. In Front Of The Sealed Envelope. • This Will Be Awarded Per Lot To The Lowest Calculated Responsive Bidder. • Specify The Brand, Model And Specifications In Your Quotation With The Letterhead Of Your Company And Your Signature (quotations Without Specified Details Are Subject For Outright Disqualification). Deadline For Submission Of Bids: 1:00 P.m. – March 03, 2025 (monday) 1) 1 Set Single Board Computer With Accessories -2.4ghz Quad-core, 64-bit Arm Cortex-a76 Cpu, With 512kb L2 Caches And A 2mb Shared L3 Cache -videocore Vii Gpu -8gb Ramlpddr4x-4267 Sdram -2.4 Ghz And 5.0 Ghz 802.11ac Wi-fi -bluetooth 5.0 / Bluetooth Low Energy (ble) -micro Sd Card Slot, With Support For Highspeed Sdr104 Mode -2 × Usb 3.0 Ports, Supporting Simultaneous 5gbps Operation -2 × Usb 2.0 Ports -gigabit Ethernet, With Poe+ Support (requires Poe+ Hat) -2 × 4 Lane Mipi Camera/display Transceivers -pcie 2.0 X1 Interface For Fast Peripherals -5v/5a Dc Power (pd Enabled) -raspberry Pi Standard 40-pin Header -real-time Clock (rtc), Powered From External Battery -on-board Power Button Accessories: 1. 1 Pc Rugged Industrial Enclosure Kit - Rear Panel Is Made From 3mm Acrylic - Allows For Access To The Sd Card From The Assembled Enclosure 2. 1 Pc Cooling Fan - Single-piece Anodised Aluminium Heatsink - Pre-applied Thermal Pads For Heat Transfer 3. 1 Pc Power Supply - Input: 100-240 Vac - Output : 5a At 5.1v, 3a At 9v, 2.25a At 12v, 1.8a At 15v - Connector : Usb-c - Cable : 1.2m, 18awg 4. 1 Pc High Definition Camera - 12.3mp High Quality Camera - Sony Imx477r Sensor - Up To 12-bit Raw Data - Adjustable Back Focus Length - Integrated 1/4"-20 Tripod Mount - Compatible With All Raspberry Pi Computers - Compatible With C-mount And Cs-mount Lenses (c-cs Adaptor Included) - 200mm Ribbon Cable Included - Integrated Ir Filter 5. Touchscreen Display At Least 7" Screen Display Minimum 720x1280 Pixel Resolution Connectors Included 6. Automation And Control Hats - Automation And Motor Control Can Drive 2 Stepper Motors Or 4 Dc Motors Or A Combination Of The Two Dedicated Onboard Processor Conforms To Rohs, Fcc Part 15 Class A, And Ce Standards With Capability Of Dedicated Power Input (15v Max) 7. 1 Pc Microsd Card - 32 Gb, Hc Class10 - Preferably With Preinstalled Pi Os - Sd Card Adapter 8. Keyboard And Mouse Compatible With The Single Board Computer Delivery Period: 30 Calendar Days Warranty: 1 Year Important Reminders: Price: Inclusive Of All Applicable Taxes Price Validity: Pls. Specify Payment Terms: 15-30 Days Credit Delivery Terms: Pls. Specify Warranty Terms: Pls. Specify (if Applicable) Chemicals And Reagents- Delivery Shall Be Accompanied With Certificate Of Analysis Equipment- Delivery Shall Be Accompanied With Installation/test And Warranty Certificates Computer And Computer Parts- Delivery Shall Be Accompanied With Test/warranty Certificates This Shall Be Part Of The Delivery If Found Acceptable. Items Are To Be Delivered At Property & Procurement Section, 2nd Floor, Metrology Bldg., Itdi, Dost Compound, Bicutan, Taguig City. Additional Requirements: Upon Submission Of Quotation (abc > P50,000.00) * Philgeps Registration Certificate/number * Mayor’s/business Permit * Income/business Tax Return Or Tax Clearance Certificate * Pcab License (for Infra Projects) * Tax Identification Number (tin) * Bank Details: Account Name, Account Number, Bank Name And Branch (preferably Landbank Of The Philippines) Note: For Bank Transfers, If The Creditor’s Account Is Maintained Outside The Agency’s Mds-gsb, Corresponding Bank Charges Shall Be Borne/paid By The Creditor/payee Concerned.
Public Security (main agency) Tender
Others...+2Civil And Construction, Civil Works Others
Saudi Arabia
Closing Soon4 Mar 2025
Tender AmountRefer Documents
Description: Regarding the supply of special cameras for the Media and Corporate Communications Division of the General Department of Security and Protection
Development Academy Of The Philippines Tender
Security and Emergency Services
Philippines
Closing Soon4 Mar 2025
Tender AmountPHP 950 K (USD 16.4 K)
Details: Description Project: Supply Of Supervision, Labor, Materials And Equipment For The Installation, Of Additional Cctv And Door Access Including All Other Accessories To Complete, Testing And Commissioning Of The Entire Cctv And Door Access System At Dap Building In Pasig City. 01. General Requirements: General: One Lot Supply Of Technical Expertise, Supervision, Labor, Tools, Materials And Commissioning For The: 01.1. Site Inspection For Validation Of Measurement And Other Works, Fill-up Site Visit Form Provided By Dap Engineering Office; 01.2. Clean/clear Haul Of Debris And Turn-over Including Restoration Of All Affected Areas; 01.3. Provide Manpower List , Work Schedules And Equipment List; And, 01.4. Submit Duly Prepared/ Signed/ Approved “records Drawings Or Plans” Complete With Legend, Technical Specifications And Measurement. All Production Plans Shall Be Done In Cad On A3 Size Sheet With An E-file Of Said Plans. 02. Scope Of Works: 02.1. Install And Commission The Additional 15-units Digital Cctv Surveillance Camera’s In The Floor 5a Area, 4a Area, 2a Area, Rooftop Area Basement Area And Mpc Perimeter Area Should Be Compatible To The Existing Cctv: Specified Location: • Additional Cctv Camera: - Camera 1: Location 5a Area Facing Main Door Beside Elevator. - Camera 2: Location 4a Area Facing Main Door Beside Elevator. - Camera 3: Location 2a Area Facing Main Door - Camera 4: Location 2a Area Facing Conference Room. - Camera 5: Location 2a Area Facing Drdo Office & Dsm Office Main Door. - Camera 6: Location 2a Server Room - Camera 7: Location Rooftop Area Igh Coffee Shop. - Camera 8: Location Rooftop Area Facing Main Door Igh Multi Media Room. - Camera 9: Location Rooftop Area Facing Main Door Igh Learning Center. - Camera 10: Location Rooftop Area Inside Igh Multi Media Room - Camera 11: Location Rooftop Area Avr Veranda Facing San Miguel Ave. - Camera 12: Location Basement Area Facing Mv Pool Office And Motor Pool Area. - Camera 13: Location Basement Area Facing Electrical Room And Genset Room. - Camera 14: Location Mpc Parking Area Facing Mpc Gate And Former Ama School. - Camera 15: Location Perimeter Area Planting Area. 02.1.1. Specification Of Camera’s ; 02.1.1.1. 4-units Ip Outdoor Type Camera: 02.1.1.2. 11-units Ip Indoor Type Camera: (a) Lens-6.0mm; (b) Infrared Range 1 To 30 Meters; (c) Image Sensor-3mp; (d) Max. Image Resolution 1080p; (e) Network-ip; (f) Power Source- 12vdc Poe(802af); And, (g) Preferably Same In The Existing Camera’s. 02.2. Install And Commission The Additional 6-units Door Access System To Be Install In Floor 2a Main Door, 2a Server Room, 3a Cash Office, 3b Registrar Office, 5b Ictd Office And Ighlc Sliding Door At Rooftop Area Should Be Compatible To The Existing Door Access System: • Additional Door Access : - Door Access 1: Location 2a Floor Main Door. - Door Access 2: Location 2a Server Room Door. - Door Access 3: Location 5b Area Ictd Main Door. - Door Access 4: Location Rooftop Are Main Door Igh Learning Center Sliding Door. - Door Access 5: 3a Area Cash Office. - Door Access 6: 3b Area Registrar Office. 02.2.1. Specification Of Door Access; 02.2.1.1. 6-units Door Access: (a) Poe Falco Controller With Panel; (b) Drop Bolt; (c) Door Contact; (d) Reader In/out; (e) Emergency Break Glass; (f) Push Button; (g) Power Source- 12vdc Poe(802af); And, (h) Preferably Same In The Existing Camera’s. 02.3. Replace The Defective 2-units Door Access At Main Lobby 5b And 1a. 02.4. Replace The Defective 8-units Cctv System. • Cctv Cameras Location For Replacement Due To Deffected Unit: - Camera 1: Location 6a Area Facing Op Hall Way. - Camera 2: Location 5a Lobby Area - Camera 3: Location 4a Lobby Area - Camera 4: Location 3a Cash Office Area - Camera 5: Location 2a Area Beside Elevator - Camera 6: Location 1a Fire Exit Door Area Bldg. A - Camera 7: Location 3a Area Beside Elevator - Camera 8: Basement Area Staff Quarters. 02.5. Transfer Door Access From 6a Former Security Room To 3a Security Room. 02.6. Supply Conduit, Structure Cabling, Roughing-in Pvc Conduit And All Other Accessories Needed To Completion Of The Said Project. 02.7. Supply, Install And Commission The Display Monitor 23” Led And 1 Unit – 1 Kva Ups; 02.8. Supply, Install And Commission The 1-unit Poe Switch 24-port Preferably D-link Dgs-1210-28p To Match The Existing Device; 02.9. Preventive Maintenance Of Existing 25-units Cctv Cameras And All Other Accessories; 02.10.supply, Install And Commission The 2-units 4tb Hard Drive For Nvr Server; 02.11.train The Security Personnel In The Use Such As Monitoring, Searching, Recording And Creation Of Back-up Footages Of The Pc Server And 02.12.commission And Turn-over The Units For Acceptance. 03. Cleaning / Clearing / Hauling And Turnover: 03.1. Restore To Its Original Condition Any Facilities And Areas That Has Been Damaged Due To Accidents Arising From Installation. 03.2. Clean The Areas Before Turn-over; And, 03.3. Turn-over The Entire Project For Acceptance To Dap Engineering Office 04. Post-installation Documents: Submit The Following Documents For Final Inspection And Reference Purposes. 04.1. Original Copy Of “record Drawings / Plan” Complete With Legend, Technical Specifications, Test Results And Measurements; And, 04.2. Certification From The Contractor Specifying Warranty Of At Least One (1) Year; And, 04.3. Project Duration Should Be Forty Five (45) Calendar Days From The Date Purchase Order Is Conformed By The Contractor. 05. Other Requirements: 05.1. All Work-details, Plans, Lay-outs, And Schedule Should Be Submitted And Approved By The Dap Engineering Office Before The Contractor Begins To Work; And, 05.2. Submit Hard And Soft Copy Of Before, On-going And After Pictures
Bulao Elementary School Tender
Electronics Equipment...+1Electrical and Electronics
Philippines
Closing Soon3 Mar 2025
Tender AmountPHP 86 K (USD 1.4 K)
Details: Description Ptz Pan Tilt Camera 4 Pcs Steel Cabinet 5 Layers With Glass Sliding 1 Pc Standard Stand Fan Sts 18 10 Pcs
BARANGAY 824, ZONE 89, DISTRICT V, MANILA Tender
Electronics Equipment...+1Electrical and Electronics
Philippines
Closing Soon6 Mar 2025
Tender AmountPHP 293.6 K (USD 5 K)
Description: Procurement Of R/m Of Public Address System Procurement Of Supplies For Clean And Beautification Procurement Of Icte - Cctv Camera , General Merchandise ,barangay 824, Zone 89, District V, Manila
BARANGAY LABAYUG, SISON, PANGASINAN Tender
Security and Emergency Services
Philippines
Closing Date13 Mar 2025
Tender AmountPHP 300 K (USD 5.1 K)
Description: Purchase/installation Of Cctv Cameras Of Barangay Labayug , Security Surveillance And Detection Equipment ,barangay Labayug, Sison, Pangasinan
Municipality Of Boac, Marinduque Tender
Others
Philippines
Closing Soon7 Mar 2025
Tender AmountPHP 338.9 K (USD 5.8 K)
Description: Supply & Delivery Of Dslr Camera, Laptop & Other Supplies Of Mho, Mpdo & Mswdo , Office Equipment Supplies And Consumables ,municipality Of Boac, Marinduque
BARANGAY LIONG ROXAS CITY CAPIZ Tender
Security and Emergency Services
Philippines
Closing Soon7 Mar 2025
Tender AmountPHP 110.5 K (USD 1.9 K)
Description: Installation Of Cctv Cameras Counterpart For Roxas City Eoc , Communication Equipment & Parts And Accessories ,barangay Liong - Roxas City Capiz
261-270 of 1727 active Tenders